2017-11-08T13:22:36.347Z,1510147356.347 [Supervisor](DEBUG): Initializing supervisor.
2017-11-08T13:22:36.350Z,1510147356.350 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2017-11-08T13:22:36.350Z,1510147356.350 [SyncHandler](INFO): Protected caller Thread ID is 798
2017-11-08T13:22:36.351Z,1510147356.351 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2017-11-08T13:22:36.352Z,1510147356.352 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2017-11-08T13:22:36.352Z,1510147356.352 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 799
2017-11-08T13:22:36.354Z,1510147356.354 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2017-11-08T13:22:36.366Z,1510147356.366 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2017-11-08T13:22:36.367Z,1510147356.367 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2017-11-08T13:22:36.367Z,1510147356.367 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 800
2017-11-08T13:22:36.368Z,1510147356.368 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2017-11-08T13:22:36.369Z,1510147356.369 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2017-11-08T13:22:36.369Z,1510147356.369 [logger ThreadHandler](INFO): Protected caller Thread ID is 801
2017-11-08T13:22:36.371Z,1510147356.371 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2017-11-08T13:22:36.371Z,1510147356.371 [Supervisor](INFO): Looking for Config files in directory: Config/
2017-11-08T13:22:36.377Z,1510147356.377 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2017-11-08T13:22:36.689Z,1510147356.689 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2017-11-08T13:22:36.690Z,1510147356.690 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2017-11-08T13:22:36.785Z,1510147356.785 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2017-11-08T13:22:36.785Z,1510147356.785 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2017-11-08T13:22:37.205Z,1510147357.205 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2017-11-08T13:22:37.207Z,1510147357.207 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2017-11-08T13:22:37.304Z,1510147357.304 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2017-11-08T13:22:37.304Z,1510147357.304 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2017-11-08T13:22:37.487Z,1510147357.487 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2017-11-08T13:22:37.488Z,1510147357.488 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2017-11-08T13:22:37.762Z,1510147357.762 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2017-11-08T13:22:37.763Z,1510147357.763 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2017-11-08T13:22:37.948Z,1510147357.948 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2017-11-08T13:22:37.948Z,1510147357.948 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2017-11-08T13:22:38.029Z,1510147358.029 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2017-11-08T13:22:38.155Z,1510147358.155 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2017-11-08T13:22:38.156Z,1510147358.156 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2017-11-08T13:22:38.487Z,1510147358.487 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2017-11-08T13:22:38.488Z,1510147358.488 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2017-11-08T13:22:38.910Z,1510147358.910 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2017-11-08T13:22:38.911Z,1510147358.911 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2017-11-08T13:22:39.103Z,1510147359.103 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2017-11-08T13:22:39.103Z,1510147359.103 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2017-11-08T13:22:39.387Z,1510147359.387 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2017-11-08T13:22:39.388Z,1510147359.388 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2017-11-08T13:22:39.491Z,1510147359.491 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2017-11-08T13:22:39.492Z,1510147359.492 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2017-11-08T13:22:39.628Z,1510147359.628 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2017-11-08T13:22:39.630Z,1510147359.630 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-opah/
2017-11-08T13:22:39.635Z,1510147359.635 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Control.cfg
2017-11-08T13:22:39.734Z,1510147359.734 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/secure.cfg
2017-11-08T13:22:40.014Z,1510147360.014 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Simulator.cfg
2017-11-08T13:22:40.312Z,1510147360.312 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/BIT.cfg
2017-11-08T13:22:40.478Z,1510147360.478 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Battery.cfg
2017-11-08T13:22:40.696Z,1510147360.696 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2017-11-08T13:22:40.697Z,1510147360.697 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Science.cfg
2017-11-08T13:22:40.835Z,1510147360.835 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/logger.cfg
2017-11-08T13:22:40.929Z,1510147360.929 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Sensor.cfg
2017-11-08T13:22:41.084Z,1510147361.084 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/vehicle.cfg
2017-11-08T13:22:41.241Z,1510147361.241 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Navigation.cfg
2017-11-08T13:22:41.341Z,1510147361.341 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Servo.cfg
2017-11-08T13:22:41.444Z,1510147361.444 [Supervisor](FAULT): Ignoring configuration overrides from Data/persisted.cfg
2017-11-08T13:22:41.448Z,1510147361.448 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2017-11-08T13:22:41.600Z,1510147361.600 [SBIT](DEBUG): Construct Startup Built In Test.
2017-11-08T13:22:41.629Z,1510147361.629 [SBIT] Loaded
2017-11-08T13:22:41.629Z,1510147361.629 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2017-11-08T13:22:41.630Z,1510147361.630 [IBIT](DEBUG): Construct Initiated Built In Test.
2017-11-08T13:22:41.656Z,1510147361.656 [IBIT] Loaded
2017-11-08T13:22:41.657Z,1510147361.657 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2017-11-08T13:22:41.660Z,1510147361.660 [CBIT](DEBUG): Construct Continuous Built In Test.
2017-11-08T13:22:41.807Z,1510147361.807 [CBIT] Loaded
2017-11-08T13:22:41.807Z,1510147361.807 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2017-11-08T13:22:41.807Z,1510147361.807 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2017-11-08T13:22:41.808Z,1510147361.808 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2017-11-08T13:22:42.078Z,1510147362.078 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2017-11-08T13:22:42.080Z,1510147362.080 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2017-11-08T13:22:42.604Z,1510147362.604 [DataOverHttps] Loaded
2017-11-08T13:22:42.605Z,1510147362.605 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2017-11-08T13:22:42.632Z,1510147362.632 [Depth_Keller] Loaded
2017-11-08T13:22:42.632Z,1510147362.632 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2017-11-08T13:22:42.637Z,1510147362.637 [DropWeight] Loaded
2017-11-08T13:22:42.637Z,1510147362.637 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2017-11-08T13:22:42.723Z,1510147362.723 [NAL9602] Loaded
2017-11-08T13:22:42.723Z,1510147362.723 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2017-11-08T13:22:42.731Z,1510147362.731 [Onboard] Loaded
2017-11-08T13:22:42.732Z,1510147362.732 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2017-11-08T13:22:42.738Z,1510147362.738 [Radio_Surface] Loaded
2017-11-08T13:22:42.739Z,1510147362.739 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2017-11-08T13:22:42.740Z,1510147362.740 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 407BC4E0
2017-11-08T13:22:42.740Z,1510147362.740 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 880
2017-11-08T13:22:42.746Z,1510147362.746 [SCPI] Loaded
2017-11-08T13:22:42.747Z,1510147362.747 [ComponentRegistry](DEBUG): SyncComponent "SCPI" handled in the control thread.
2017-11-08T13:22:42.897Z,1510147362.897 [PNI_TCM] Loaded
2017-11-08T13:22:42.897Z,1510147362.897 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2017-11-08T13:22:42.957Z,1510147362.957 [Rowe_600LCM] Loaded
2017-11-08T13:22:42.957Z,1510147362.957 [ComponentRegistry](DEBUG): Component "Rowe_600LCM" handled in its own thread.
2017-11-08T13:22:42.958Z,1510147362.958 [Rowe_600LCM ThreadHandler](DEBUG): Created PCaller Thread at 407EC4E0
2017-11-08T13:22:42.959Z,1510147362.959 [Rowe_600LCM ThreadHandler](INFO): Protected caller Thread ID is 881
2017-11-08T13:22:44.652Z,1510147364.652 [BPC1] Loaded
2017-11-08T13:22:44.652Z,1510147364.652 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2017-11-08T13:22:44.653Z,1510147364.653 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2017-11-08T13:22:44.653Z,1510147364.653 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2017-11-08T13:22:44.824Z,1510147364.824 [Aanderaa_O2] Loaded
2017-11-08T13:22:44.824Z,1510147364.824 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2017-11-08T13:22:44.858Z,1510147364.858 [CTD_Seabird] Loaded
2017-11-08T13:22:44.858Z,1510147364.858 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2017-11-08T13:22:44.859Z,1510147364.859 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 408754E0
2017-11-08T13:22:44.859Z,1510147364.859 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 882
2017-11-08T13:22:44.873Z,1510147364.873 [PAR_Licor] Loaded
2017-11-08T13:22:44.873Z,1510147364.873 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2017-11-08T13:22:44.921Z,1510147364.921 [WetLabsBB2FL] Loaded
2017-11-08T13:22:44.921Z,1510147364.921 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2017-11-08T13:22:44.922Z,1510147364.922 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 408A54E0
2017-11-08T13:22:44.923Z,1510147364.923 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 883
2017-11-08T13:22:44.923Z,1510147364.923 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2017-11-08T13:22:44.924Z,1510147364.924 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2017-11-08T13:22:45.221Z,1510147365.221 [VerticalControl](DEBUG): Construct VerticalControl.
2017-11-08T13:22:45.317Z,1510147365.317 [VerticalControl] Loaded
2017-11-08T13:22:45.318Z,1510147365.318 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2017-11-08T13:22:45.318Z,1510147365.318 [HorizontalControl](DEBUG): Construct HorizontalControl.
2017-11-08T13:22:45.378Z,1510147365.378 [HorizontalControl] Loaded
2017-11-08T13:22:45.378Z,1510147365.378 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2017-11-08T13:22:45.379Z,1510147365.379 [SpeedControl](DEBUG): Construct SpeedControl.
2017-11-08T13:22:45.384Z,1510147365.384 [SpeedControl] Loaded
2017-11-08T13:22:45.384Z,1510147365.384 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2017-11-08T13:22:45.385Z,1510147365.385 [LoopControl](DEBUG): Construct LoopControl.
2017-11-08T13:22:45.386Z,1510147365.386 [LoopControl] Loaded
2017-11-08T13:22:45.386Z,1510147365.386 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2017-11-08T13:22:45.386Z,1510147365.386 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2017-11-08T13:22:45.387Z,1510147365.387 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2017-11-08T13:22:45.411Z,1510147365.411 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2017-11-08T13:22:45.411Z,1510147365.411 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2017-11-08T13:22:45.527Z,1510147365.527 [BuoyancyServo] Loaded
2017-11-08T13:22:45.528Z,1510147365.528 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2017-11-08T13:22:45.539Z,1510147365.539 [ElevatorServo] Loaded
2017-11-08T13:22:45.539Z,1510147365.539 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2017-11-08T13:22:45.549Z,1510147365.549 [MassServo] Loaded
2017-11-08T13:22:45.550Z,1510147365.550 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2017-11-08T13:22:45.561Z,1510147365.561 [RudderServo] Loaded
2017-11-08T13:22:45.561Z,1510147365.561 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2017-11-08T13:22:45.572Z,1510147365.572 [ThrusterServo] Loaded
2017-11-08T13:22:45.572Z,1510147365.572 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2017-11-08T13:22:45.572Z,1510147365.572 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2017-11-08T13:22:45.573Z,1510147365.573 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2017-11-08T13:22:45.609Z,1510147365.609 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2017-11-08T13:22:45.610Z,1510147365.610 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2017-11-08T13:22:45.646Z,1510147365.646 [DepthRateCalculator] Loaded
2017-11-08T13:22:45.646Z,1510147365.646 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2017-11-08T13:22:45.652Z,1510147365.652 [PitchRateCalculator] Loaded
2017-11-08T13:22:45.652Z,1510147365.652 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2017-11-08T13:22:45.667Z,1510147365.667 [SpeedCalculator] Loaded
2017-11-08T13:22:45.667Z,1510147365.667 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2017-11-08T13:22:45.688Z,1510147365.688 [TempGradientCalculator] Loaded
2017-11-08T13:22:45.688Z,1510147365.688 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2017-11-08T13:22:45.703Z,1510147365.703 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2017-11-08T13:22:45.704Z,1510147365.704 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2017-11-08T13:22:45.709Z,1510147365.709 [YawRateCalculator] Loaded
2017-11-08T13:22:45.709Z,1510147365.709 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2017-11-08T13:22:45.709Z,1510147365.709 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2017-11-08T13:22:45.710Z,1510147365.710 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2017-11-08T13:22:45.832Z,1510147365.832 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2017-11-08T13:22:45.833Z,1510147365.833 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2017-11-08T13:22:45.942Z,1510147365.942 [DeadReckonUsingMultipleVelocitySources] Loaded
2017-11-08T13:22:45.943Z,1510147365.943 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2017-11-08T13:22:45.997Z,1510147365.997 [DeadReckonUsingSpeedCalculator] Loaded
2017-11-08T13:22:45.997Z,1510147365.997 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2017-11-08T13:22:46.050Z,1510147366.050 [DeadReckonWithRespectToSeafloor] Loaded
2017-11-08T13:22:46.050Z,1510147366.050 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2017-11-08T13:22:46.066Z,1510147366.066 [NavChart] Loaded
2017-11-08T13:22:46.066Z,1510147366.066 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2017-11-08T13:22:46.070Z,1510147366.070 [UniversalFixResidualReporter] Loaded
2017-11-08T13:22:46.070Z,1510147366.070 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2017-11-08T13:22:46.071Z,1510147366.071 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2017-11-08T13:22:46.072Z,1510147366.072 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2017-11-08T13:22:46.188Z,1510147366.188 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2017-11-08T13:22:46.188Z,1510147366.188 [StratificationFrontDetector](DEBUG): (re)initializing
2017-11-08T13:22:46.189Z,1510147366.189 [StratificationFrontDetector] Loaded
2017-11-08T13:22:46.189Z,1510147366.189 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2017-11-08T13:22:46.189Z,1510147366.189 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2017-11-08T13:22:46.193Z,1510147366.193 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2017-11-08T13:22:46.194Z,1510147366.194 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2017-11-08T13:22:46.200Z,1510147366.200 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2017-11-08T13:22:46.201Z,1510147366.201 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40A164E0
2017-11-08T13:22:46.202Z,1510147366.202 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 884
2017-11-08T13:22:46.207Z,1510147366.207 [Supervisor](INFO): Main Thread ID is 794
2017-11-08T13:22:46.207Z,1510147366.207 [Supervisor](DEBUG): Running supervisor.
2017-11-08T13:22:46.207Z,1510147366.207 [CommandLine ThreadHandler](INFO): Handler Thread ID is 885
2017-11-08T13:22:46.210Z,1510147366.210 [controlThread ThreadHandler](INFO): Handler Thread ID is 886
2017-11-08T13:22:46.210Z,1510147366.210 [controlThread](DEBUG): Initializing ControlThread
2017-11-08T13:22:46.211Z,1510147366.211 [SBIT](INFO): Initialize SBIT Component.
2017-11-08T13:22:46.212Z,1510147366.212 [SBIT](IMPORTANT): git: 2017-10-26-27-g28caa4f
2017-11-08T13:22:46.212Z,1510147366.212 [SBIT](INFO): git hash: 28caa4f52d4014465ae2cbbbbc56c9b8302a605b
2017-11-08T13:22:46.212Z,1510147366.212 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2017-11-08T13:22:46.213Z,1510147366.213 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #17 PREEMPT Fri Oct 6 17:22:04 PDT 2017
2017-11-08T13:22:46.214Z,1510147366.214 [SBIT](INFO): Beginning SBIT in 59.000000 seconds.
2017-11-08T13:22:46.215Z,1510147366.215 [IBIT](INFO): Initialize IBIT Component.
2017-11-08T13:22:46.216Z,1510147366.216 [CBIT](DEBUG): Initialize CBIT Component.
2017-11-08T13:22:46.216Z,1510147366.216 [CBIT](FAULT): LAST RESTART WAS UNINTENTIONAL.
2017-11-08T13:22:46.216Z,1510147366.216 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2017-11-08T13:22:46.217Z,1510147366.217 [logger ThreadHandler](INFO): Handler Thread ID is 887
2017-11-08T13:22:46.245Z,1510147366.245 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 888
2017-11-08T13:22:46.250Z,1510147366.250 [Radio_Surface](INFO): Powering up
2017-11-08T13:22:46.269Z,1510147366.269 [Rowe_600LCM ThreadHandler](INFO): Handler Thread ID is 889
2017-11-08T13:22:46.269Z,1510147366.269 [Rowe_600LCM](INFO): Initializing
2017-11-08T13:22:46.270Z,1510147366.270 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T13:22:46.309Z,1510147366.309 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2017-11-08T13:22:46.311Z,1510147366.311 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2017-11-08T13:22:46.312Z,1510147366.312 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2017-11-08T13:22:46.312Z,1510147366.312 [LoopControl](DEBUG): Initialize LoopControlComponent.
2017-11-08T13:22:46.314Z,1510147366.314 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2017-11-08T13:22:46.314Z,1510147366.314 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2017-11-08T13:22:46.314Z,1510147366.314 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2017-11-08T13:22:46.315Z,1510147366.315 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2017-11-08T13:22:46.315Z,1510147366.315 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2017-11-08T13:22:46.316Z,1510147366.316 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2017-11-08T13:22:46.317Z,1510147366.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T13:22:46.317Z,1510147366.317 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:22:46.318Z,1510147366.318 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:22:46.318Z,1510147366.318 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T13:22:46.319Z,1510147366.319 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:22:46.319Z,1510147366.319 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:22:46.319Z,1510147366.319 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T13:22:46.320Z,1510147366.320 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:22:46.320Z,1510147366.320 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:22:46.321Z,1510147366.321 [NavChart](DEBUG): Initialize NavChart Navigation.
2017-11-08T13:22:46.321Z,1510147366.321 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2017-11-08T13:22:46.322Z,1510147366.322 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2017-11-08T13:22:46.405Z,1510147366.405 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 890
2017-11-08T13:22:46.417Z,1510147366.417 [CTD_Seabird](INFO): Initializing
2017-11-08T13:22:46.560Z,1510147366.560 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2017-11-08T13:22:46.560Z,1510147366.560 [CTD_Seabird](INFO): Powering down
2017-11-08T13:22:46.582Z,1510147366.582 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 892
2017-11-08T13:22:46.583Z,1510147366.583 [WetLabsBB2FL](INFO): Powering down
2017-11-08T13:22:46.604Z,1510147366.604 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2017-11-08T13:22:46.618Z,1510147366.618 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 893
2017-11-08T13:22:46.624Z,1510147366.624 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2017-11-08T13:22:46.624Z,1510147366.624 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2017-11-08T13:22:46.624Z,1510147366.624 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2017-11-08T13:22:46.624Z,1510147366.624 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2017-11-08T13:22:46.625Z,1510147366.625 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2017-11-08T13:22:46.625Z,1510147366.625 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2017-11-08T13:22:46.625Z,1510147366.625 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2017-11-08T13:22:46.625Z,1510147366.625 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2017-11-08T13:22:46.625Z,1510147366.625 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2017-11-08T13:22:46.625Z,1510147366.625 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2017-11-08T13:22:46.626Z,1510147366.626 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2017-11-08T13:22:46.626Z,1510147366.626 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2017-11-08T13:22:46.626Z,1510147366.626 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2017-11-08T13:22:46.626Z,1510147366.626 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2017-11-08T13:22:46.626Z,1510147366.626 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2017-11-08T13:22:46.627Z,1510147366.627 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2017-11-08T13:22:46.733Z,1510147366.733 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2017-11-08T13:22:46.734Z,1510147366.734 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2017-11-08T13:22:46.818Z,1510147366.818 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2017-11-08T13:22:46.819Z,1510147366.819 [Default:A.Wait](DEBUG): Construct Wait.
2017-11-08T13:22:46.837Z,1510147366.837 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T13:22:46.838Z,1510147366.838 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T13:22:46.838Z,1510147366.838 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T13:22:46.865Z,1510147366.865 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2017-11-08T13:22:46.875Z,1510147366.875 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2017-11-08T13:22:46.894Z,1510147366.894 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2017-11-08T13:22:46.899Z,1510147366.899 [Default:E.Execute](DEBUG): Construct Execute.
2017-11-08T13:22:46.927Z,1510147366.927 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2017-11-08T13:22:46.932Z,1510147366.932 [controlThread](DEBUG): Component order: CycleStarter,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,SCPI,PNI_TCM,BPC1,Aanderaa_O2,PAR_Licor,Depth_Keller,PAR_Licor,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2017-11-08T13:22:46.957Z,1510147366.957 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2017-11-08T13:22:47.011Z,1510147367.011 [Depth_Keller](ERROR): Pressure reading out of range: 1658.386841 decibar
2017-11-08T13:22:47.261Z,1510147367.261 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T13:22:47.313Z,1510147367.313 [DepthRateCalculator](ERROR): Depth measurement is not active
2017-11-08T13:22:47.441Z,1510147367.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:47.441Z,1510147367.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-08T13:22:47.507Z,1510147367.507 [Rowe_600LCM](INFO): Powering down
2017-11-08T13:22:47.593Z,1510147367.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:47.605Z,1510147367.605 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:47.613Z,1510147367.613 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:47.734Z,1510147367.734 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2017-11-08T13:22:47.737Z,1510147367.737 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2017-11-08T13:22:47.759Z,1510147367.759 [ElevatorServo](DEBUG): Initializing EZServoServo.
2017-11-08T13:22:47.765Z,1510147367.765 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2017-11-08T13:22:47.771Z,1510147367.771 [MassServo](DEBUG): Initializing EZServoServo.
2017-11-08T13:22:47.777Z,1510147367.777 [MassServo](DEBUG): Initializing MassServo.
2017-11-08T13:22:47.796Z,1510147367.796 [RudderServo](DEBUG): Initializing EZServoServo.
2017-11-08T13:22:47.805Z,1510147367.805 [RudderServo](DEBUG): Initializing RudderServo.
2017-11-08T13:22:47.826Z,1510147367.826 [ThrusterServo](DEBUG): Initializing EZServoServo.
2017-11-08T13:22:47.833Z,1510147367.833 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2017-11-08T13:22:47.885Z,1510147367.885 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:22:48.131Z,1510147368.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:48.131Z,1510147368.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-08T13:22:48.132Z,1510147368.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:48.140Z,1510147368.140 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:48.141Z,1510147368.141 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:48.388Z,1510147368.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:48.389Z,1510147368.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-08T13:22:48.390Z,1510147368.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:48.390Z,1510147368.390 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:48.391Z,1510147368.391 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:48.824Z,1510147368.824 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T13:22:48.824Z,1510147368.824 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T13:22:48.887Z,1510147368.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:48.887Z,1510147368.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-08T13:22:48.888Z,1510147368.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:48.889Z,1510147368.889 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:48.890Z,1510147368.890 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:49.153Z,1510147369.153 [Rowe_600LCM](INFO): Initializing
2017-11-08T13:22:49.153Z,1510147369.153 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T13:22:49.153Z,1510147369.153 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T13:22:49.153Z,1510147369.153 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T13:22:49.153Z,1510147369.153 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T13:22:49.320Z,1510147369.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:49.320Z,1510147369.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-08T13:22:49.321Z,1510147369.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:49.337Z,1510147369.337 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:49.338Z,1510147369.338 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:49.360Z,1510147369.360 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:22:49.557Z,1510147369.557 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T13:22:49.673Z,1510147369.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:49.673Z,1510147369.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-08T13:22:49.675Z,1510147369.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:49.675Z,1510147369.675 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:49.676Z,1510147369.676 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:49.797Z,1510147369.797 [Rowe_600LCM](INFO): Powering down
2017-11-08T13:22:50.088Z,1510147370.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:50.088Z,1510147370.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-08T13:22:50.089Z,1510147370.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:50.090Z,1510147370.090 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:50.091Z,1510147370.091 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:50.593Z,1510147370.593 [Aanderaa_O2](INFO): Powering down
2017-11-08T13:22:50.667Z,1510147370.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:50.667Z,1510147370.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-08T13:22:50.668Z,1510147370.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:50.709Z,1510147370.709 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:50.710Z,1510147370.710 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-08T13:22:50.958Z,1510147370.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-08T13:22:50.959Z,1510147370.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:51.133Z,1510147371.133 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T13:22:51.133Z,1510147371.133 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T13:22:51.337Z,1510147371.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-08T13:22:51.338Z,1510147371.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:51.413Z,1510147371.413 [Rowe_600LCM](INFO): Initializing
2017-11-08T13:22:51.417Z,1510147371.417 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T13:22:51.417Z,1510147371.417 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T13:22:51.417Z,1510147371.417 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T13:22:51.417Z,1510147371.417 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T13:22:51.673Z,1510147371.673 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:22:51.773Z,1510147371.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-08T13:22:51.774Z,1510147371.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:51.821Z,1510147371.821 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T13:22:52.154Z,1510147372.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:52.177Z,1510147372.177 [Rowe_600LCM](INFO): Powering down
2017-11-08T13:22:52.590Z,1510147372.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:52.960Z,1510147372.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:53.373Z,1510147373.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:53.489Z,1510147373.489 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T13:22:53.489Z,1510147373.489 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T13:22:53.766Z,1510147373.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:53.794Z,1510147373.794 [Rowe_600LCM](INFO): Initializing
2017-11-08T13:22:53.796Z,1510147373.796 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T13:22:53.796Z,1510147373.796 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T13:22:53.796Z,1510147373.796 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T13:22:53.796Z,1510147373.796 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T13:22:53.882Z,1510147373.882 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:22:54.170Z,1510147374.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:54.201Z,1510147374.201 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T13:22:54.421Z,1510147374.421 [Rowe_600LCM](INFO): Powering down
2017-11-08T13:22:54.569Z,1510147374.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:54.938Z,1510147374.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:55.365Z,1510147375.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:55.748Z,1510147375.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:55.873Z,1510147375.873 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T13:22:55.873Z,1510147375.873 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T13:22:56.037Z,1510147376.037 [Rowe_600LCM](INFO): Initializing
2017-11-08T13:22:56.037Z,1510147376.037 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T13:22:56.037Z,1510147376.037 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T13:22:56.037Z,1510147376.037 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T13:22:56.037Z,1510147376.037 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T13:22:56.139Z,1510147376.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:56.261Z,1510147376.261 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:22:56.261Z,1510147376.261 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:22:56.441Z,1510147376.441 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T13:22:56.559Z,1510147376.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:56.744Z,1510147376.744 [Rowe_600LCM](INFO): Powering down
2017-11-08T13:22:56.951Z,1510147376.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:57.383Z,1510147377.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:57.747Z,1510147377.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:58.139Z,1510147378.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:58.540Z,1510147378.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:58.970Z,1510147378.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:59.353Z,1510147379.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:22:59.739Z,1510147379.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:00.210Z,1510147380.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:00.592Z,1510147380.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:00.954Z,1510147380.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:01.332Z,1510147381.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:01.746Z,1510147381.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:02.140Z,1510147382.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:02.542Z,1510147382.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:02.965Z,1510147382.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:03.367Z,1510147383.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:03.784Z,1510147383.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:04.164Z,1510147384.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:04.547Z,1510147384.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:05.027Z,1510147385.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:05.344Z,1510147385.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:05.754Z,1510147385.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:06.152Z,1510147386.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:06.554Z,1510147386.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:06.969Z,1510147386.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:07.351Z,1510147387.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:07.761Z,1510147387.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:08.142Z,1510147388.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:08.578Z,1510147388.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:08.942Z,1510147388.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:09.375Z,1510147389.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:09.782Z,1510147389.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:10.124Z,1510147390.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:10.565Z,1510147390.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:10.958Z,1510147390.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:11.341Z,1510147391.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:11.732Z,1510147391.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:12.162Z,1510147392.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:12.527Z,1510147392.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:12.886Z,1510147392.886 [NAL9602](INFO): Powering up NAL9602
2017-11-08T13:23:12.999Z,1510147392.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:13.366Z,1510147393.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:13.752Z,1510147393.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:14.139Z,1510147394.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:14.553Z,1510147394.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:14.947Z,1510147394.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:15.350Z,1510147395.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:15.758Z,1510147395.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:16.147Z,1510147396.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:16.544Z,1510147396.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:16.970Z,1510147396.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:17.349Z,1510147397.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:17.791Z,1510147397.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:18.147Z,1510147398.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:18.548Z,1510147398.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:18.948Z,1510147398.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:19.355Z,1510147399.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:19.753Z,1510147399.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:20.151Z,1510147400.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:20.549Z,1510147400.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:20.953Z,1510147400.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:21.362Z,1510147401.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:21.751Z,1510147401.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:22.151Z,1510147402.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:22.582Z,1510147402.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:22.931Z,1510147402.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:23.355Z,1510147403.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:23.758Z,1510147403.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:24.082Z,1510147404.082 [NAL9602](INFO): NAL9602 initialized
2017-11-08T13:23:24.131Z,1510147404.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:24.561Z,1510147404.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:24.960Z,1510147404.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:25.329Z,1510147405.329 [PNI_TCM](ERROR): CRC does not match. Expected:0x13689 got:0x6463
2017-11-08T13:23:25.369Z,1510147405.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:25.809Z,1510147405.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:26.144Z,1510147406.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:26.545Z,1510147406.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:26.940Z,1510147406.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:27.370Z,1510147407.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:27.739Z,1510147407.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:28.168Z,1510147408.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:28.591Z,1510147408.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:28.919Z,1510147408.919 [PNI_TCM](ERROR): CRC does not match. Expected:0x63718 got:0x49579
2017-11-08T13:23:28.962Z,1510147408.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:29.330Z,1510147409.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:29.784Z,1510147409.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:30.144Z,1510147410.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:30.579Z,1510147410.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:30.937Z,1510147410.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:31.390Z,1510147411.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:31.736Z,1510147411.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:32.151Z,1510147412.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:32.535Z,1510147412.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:32.955Z,1510147412.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:33.338Z,1510147413.338 [PNI_TCM](ERROR): CRC does not match. Expected:0x39636 got:0x26723
2017-11-08T13:23:33.381Z,1510147413.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:33.782Z,1510147413.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:34.134Z,1510147414.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:34.543Z,1510147414.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:34.945Z,1510147414.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:35.345Z,1510147415.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:35.741Z,1510147415.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:36.173Z,1510147416.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:36.540Z,1510147416.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:36.957Z,1510147416.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:37.339Z,1510147417.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:37.754Z,1510147417.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:38.160Z,1510147418.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:38.552Z,1510147418.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:38.947Z,1510147418.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:39.351Z,1510147419.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:39.777Z,1510147419.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:40.153Z,1510147420.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:40.549Z,1510147420.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:40.981Z,1510147420.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:41.348Z,1510147421.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:41.757Z,1510147421.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:42.119Z,1510147422.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:42.547Z,1510147422.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:42.942Z,1510147422.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:43.345Z,1510147423.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:43.743Z,1510147423.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:44.143Z,1510147424.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:44.545Z,1510147424.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:44.941Z,1510147424.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:45.346Z,1510147425.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:45.751Z,1510147425.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:45.822Z,1510147425.822 [SBIT](IMPORTANT): Beginning Startup BIT
2017-11-08T13:23:45.826Z,1510147425.826 [CBIT](IMPORTANT): Beginning ground fault scan
2017-11-08T13:23:46.125Z,1510147426.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:46.527Z,1510147426.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:46.923Z,1510147426.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:47.349Z,1510147427.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:47.751Z,1510147427.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:48.299Z,1510147428.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:48.699Z,1510147428.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:49.102Z,1510147429.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:49.470Z,1510147429.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:49.873Z,1510147429.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:50.320Z,1510147430.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:50.380Z,1510147430.380 [CBIT](FAULT): Main Battery Failure. Count: 1
2017-11-08T13:23:50.679Z,1510147430.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:51.073Z,1510147431.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:51.480Z,1510147431.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:51.889Z,1510147431.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:52.279Z,1510147432.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:52.715Z,1510147432.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:53.083Z,1510147433.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:53.520Z,1510147433.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:53.887Z,1510147433.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:54.285Z,1510147434.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:54.680Z,1510147434.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:55.075Z,1510147435.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:55.473Z,1510147435.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:55.879Z,1510147435.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:56.275Z,1510147436.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:56.674Z,1510147436.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:56.729Z,1510147436.729 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.005322
CHAN A1 (24V): -0.074413
CHAN A2 (12V): -0.000698
CHAN A3 (5V): -0.021317
CHAN B0 (3.3V): -0.000257
CHAN B1 (3.15aV): -0.000491
CHAN B2 (3.15bV): -0.000903
CHAN B3 (GND): -0.000446
OPEN: 0.003385
Full Scale Calc: 4.765 mA, -1.589 mA
2017-11-08T13:23:57.071Z,1510147437.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:57.475Z,1510147437.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:57.867Z,1510147437.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:58.297Z,1510147438.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:58.700Z,1510147438.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:59.099Z,1510147439.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:59.498Z,1510147439.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:23:59.871Z,1510147439.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:00.270Z,1510147440.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:00.669Z,1510147440.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:01.071Z,1510147441.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:01.700Z,1510147441.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:02.064Z,1510147442.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:02.468Z,1510147442.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:02.864Z,1510147442.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:03.271Z,1510147443.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:03.671Z,1510147443.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:04.075Z,1510147444.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:04.471Z,1510147444.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:04.861Z,1510147444.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:05.266Z,1510147445.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:05.666Z,1510147445.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:06.067Z,1510147446.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:06.468Z,1510147446.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:06.867Z,1510147446.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:07.262Z,1510147447.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:07.663Z,1510147447.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:08.063Z,1510147448.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:08.479Z,1510147448.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:08.879Z,1510147448.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:09.276Z,1510147449.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:09.668Z,1510147449.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:10.062Z,1510147450.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:10.467Z,1510147450.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:10.863Z,1510147450.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:11.261Z,1510147451.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:11.667Z,1510147451.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:12.061Z,1510147452.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:12.467Z,1510147452.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:12.916Z,1510147452.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:13.262Z,1510147453.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:13.721Z,1510147453.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:14.074Z,1510147454.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:14.481Z,1510147454.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:14.916Z,1510147454.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:15.264Z,1510147455.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:15.683Z,1510147455.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:16.064Z,1510147456.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:16.465Z,1510147456.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:16.864Z,1510147456.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:17.265Z,1510147457.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:17.665Z,1510147457.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:18.065Z,1510147458.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:18.469Z,1510147458.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:18.876Z,1510147458.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:19.275Z,1510147459.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:19.675Z,1510147459.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:20.083Z,1510147460.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:20.470Z,1510147460.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:20.870Z,1510147460.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:21.266Z,1510147461.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:21.669Z,1510147461.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:22.072Z,1510147462.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:22.462Z,1510147462.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:22.867Z,1510147462.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:23.270Z,1510147463.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:23.662Z,1510147463.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:24.112Z,1510147464.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:24.479Z,1510147464.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:24.876Z,1510147464.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:25.275Z,1510147465.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:25.665Z,1510147465.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:26.069Z,1510147466.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:26.464Z,1510147466.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:26.870Z,1510147466.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:27.263Z,1510147467.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:27.668Z,1510147467.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:28.066Z,1510147468.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:28.585Z,1510147468.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:28.981Z,1510147468.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:29.391Z,1510147469.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:29.831Z,1510147469.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:30.201Z,1510147470.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:30.600Z,1510147470.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:30.984Z,1510147470.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:31.384Z,1510147471.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:31.783Z,1510147471.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:32.188Z,1510147472.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:32.579Z,1510147472.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:32.980Z,1510147472.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:33.380Z,1510147473.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:33.783Z,1510147473.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:34.180Z,1510147474.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:34.593Z,1510147474.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:34.988Z,1510147474.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:35.393Z,1510147475.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:35.792Z,1510147475.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:36.197Z,1510147476.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:36.583Z,1510147476.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:37.011Z,1510147477.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:37.378Z,1510147477.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:37.805Z,1510147477.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:38.185Z,1510147478.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:38.583Z,1510147478.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:38.982Z,1510147478.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:39.382Z,1510147479.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:39.793Z,1510147479.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:39.866Z,1510147479.866 [SBIT](IMPORTANT): SBIT PASSED
2017-11-08T13:24:40.199Z,1510147480.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:40.202Z,1510147480.202 [MissionManager](IMPORTANT): Started mission Startup
2017-11-08T13:24:40.203Z,1510147480.203 [Startup] Running Loop=1
2017-11-08T13:24:40.203Z,1510147480.203 [Startup](DEBUG): Aggregate::initialize Startup
2017-11-08T13:24:40.203Z,1510147480.203 [Startup:A.GoToSurface] Running Loop=1
2017-11-08T13:24:40.203Z,1510147480.203 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-11-08T13:24:40.204Z,1510147480.204 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-11-08T13:24:40.204Z,1510147480.204 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-11-08T13:24:40.205Z,1510147480.205 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-11-08T13:24:40.205Z,1510147480.205 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-11-08T13:24:40.205Z,1510147480.205 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-11-08T13:24:40.211Z,1510147480.211 [Startup:StartupSatComms] Running Loop=1
2017-11-08T13:24:40.211Z,1510147480.211 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2017-11-08T13:24:40.211Z,1510147480.211 [Startup:StartupSatComms:A] Running Loop=1
2017-11-08T13:24:40.594Z,1510147480.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:40.597Z,1510147480.597 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2017-11-08T13:24:40.989Z,1510147480.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:41.383Z,1510147481.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:41.790Z,1510147481.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:42.193Z,1510147482.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:42.593Z,1510147482.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:42.989Z,1510147482.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:43.388Z,1510147483.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:43.791Z,1510147483.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:44.188Z,1510147484.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:44.571Z,1510147484.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:44.995Z,1510147484.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:45.396Z,1510147485.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:45.799Z,1510147485.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:46.233Z,1510147486.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:46.594Z,1510147486.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:46.994Z,1510147486.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:47.371Z,1510147487.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:47.776Z,1510147487.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:48.176Z,1510147488.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:48.570Z,1510147488.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:48.976Z,1510147488.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:49.370Z,1510147489.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:49.775Z,1510147489.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:50.193Z,1510147490.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:50.595Z,1510147490.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:50.995Z,1510147490.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:51.389Z,1510147491.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:51.785Z,1510147491.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:52.186Z,1510147492.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:52.585Z,1510147492.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:52.985Z,1510147492.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:53.391Z,1510147493.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:53.786Z,1510147493.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:54.185Z,1510147494.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:54.586Z,1510147494.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:54.985Z,1510147494.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:55.399Z,1510147495.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:55.794Z,1510147495.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:56.193Z,1510147496.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:56.595Z,1510147496.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:56.991Z,1510147496.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:57.385Z,1510147497.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:57.787Z,1510147497.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:58.262Z,1510147498.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:58.585Z,1510147498.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:58.996Z,1510147498.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:59.386Z,1510147499.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:24:59.807Z,1510147499.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:00.185Z,1510147500.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:00.594Z,1510147500.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:00.993Z,1510147500.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:01.392Z,1510147501.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:01.794Z,1510147501.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:02.187Z,1510147502.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:02.585Z,1510147502.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:02.989Z,1510147502.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:03.389Z,1510147503.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:03.791Z,1510147503.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:04.191Z,1510147504.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:04.590Z,1510147504.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:04.993Z,1510147504.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:05.392Z,1510147505.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:05.800Z,1510147505.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:06.191Z,1510147506.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:06.600Z,1510147506.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:06.996Z,1510147506.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:07.395Z,1510147507.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:07.768Z,1510147507.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:08.207Z,1510147508.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:08.572Z,1510147508.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:08.994Z,1510147508.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:09.372Z,1510147509.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:09.776Z,1510147509.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:10.177Z,1510147510.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:10.576Z,1510147510.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:10.999Z,1510147510.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:11.395Z,1510147511.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:11.802Z,1510147511.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:12.211Z,1510147512.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:12.574Z,1510147512.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:13.007Z,1510147513.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:13.379Z,1510147513.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:13.779Z,1510147513.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:14.176Z,1510147514.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:14.575Z,1510147514.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:14.978Z,1510147514.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:15.379Z,1510147515.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:15.778Z,1510147515.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:16.191Z,1510147516.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:16.586Z,1510147516.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:16.992Z,1510147516.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:17.387Z,1510147517.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:17.779Z,1510147517.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:18.178Z,1510147518.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:18.582Z,1510147518.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:18.979Z,1510147518.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:19.379Z,1510147519.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:19.778Z,1510147519.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:20.235Z,1510147520.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:20.627Z,1510147520.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:20.978Z,1510147520.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:21.419Z,1510147521.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:21.786Z,1510147521.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:22.209Z,1510147522.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:22.586Z,1510147522.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:22.977Z,1510147522.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:23.374Z,1510147523.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:23.778Z,1510147523.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:24.176Z,1510147524.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:24.574Z,1510147524.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:24.981Z,1510147524.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:25.378Z,1510147525.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:25.774Z,1510147525.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:26.177Z,1510147526.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:26.611Z,1510147526.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:26.984Z,1510147526.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:27.386Z,1510147527.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:27.787Z,1510147527.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:28.175Z,1510147528.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:28.577Z,1510147528.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:28.977Z,1510147528.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:29.374Z,1510147529.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:29.778Z,1510147529.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:30.183Z,1510147530.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:30.605Z,1510147530.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:30.977Z,1510147530.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:31.381Z,1510147531.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:31.785Z,1510147531.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:32.186Z,1510147532.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:32.586Z,1510147532.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:32.989Z,1510147532.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:33.378Z,1510147533.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:33.777Z,1510147533.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:34.174Z,1510147534.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:34.578Z,1510147534.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:34.977Z,1510147534.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:35.374Z,1510147535.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:35.778Z,1510147535.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:36.187Z,1510147536.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:36.574Z,1510147536.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:36.992Z,1510147536.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:37.388Z,1510147537.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:37.813Z,1510147537.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:38.186Z,1510147538.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:38.579Z,1510147538.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:38.979Z,1510147538.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:39.381Z,1510147539.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:39.776Z,1510147539.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:40.179Z,1510147540.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:40.579Z,1510147540.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:40.582Z,1510147540.582 [Startup:StartupSatComms:A](INFO): Timed out from 2017-11-08T13:24:40.2Z
2017-11-08T13:25:40.582Z,1510147540.582 [Startup:StartupSatComms:A] Stopped
2017-11-08T13:25:40.582Z,1510147540.582 [Startup:StartupSatComms:B] Running Loop=1
2017-11-08T13:25:40.981Z,1510147540.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:40.985Z,1510147540.985 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-11-08T13:25:41.382Z,1510147541.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:41.779Z,1510147541.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:42.190Z,1510147542.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:42.657Z,1510147542.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:42.995Z,1510147542.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:43.387Z,1510147543.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:43.796Z,1510147543.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:44.178Z,1510147544.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:44.615Z,1510147544.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:44.979Z,1510147544.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:45.377Z,1510147545.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:45.787Z,1510147545.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:46.175Z,1510147546.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:46.578Z,1510147546.578 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:46.578Z,1510147546.578 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-11-08T13:25:46.578Z,1510147546.578 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T13:25:46.580Z,1510147546.580 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:46.580Z,1510147546.580 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2017-11-08T13:25:46.580Z,1510147546.580 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T13:25:46.582Z,1510147546.582 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:46.582Z,1510147546.582 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-11-08T13:25:46.582Z,1510147546.582 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T13:25:46.657Z,1510147546.657 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T13:25:46.657Z,1510147546.657 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T13:25:46.658Z,1510147546.658 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T13:25:47.065Z,1510147547.065 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T13:25:47.065Z,1510147547.065 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-11-08T13:25:47.065Z,1510147547.065 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T13:25:47.065Z,1510147547.065 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2017-11-08T13:25:47.066Z,1510147547.066 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T13:25:47.066Z,1510147547.066 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-11-08T13:25:47.392Z,1510147547.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T13:25:47.393Z,1510147547.393 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:25:47.393Z,1510147547.393 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:25:47.394Z,1510147547.394 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T13:25:47.394Z,1510147547.394 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:25:47.394Z,1510147547.394 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:25:47.395Z,1510147547.395 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T13:25:47.395Z,1510147547.395 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:25:47.395Z,1510147547.395 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:25:47.797Z,1510147547.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T13:25:47.798Z,1510147547.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:48.197Z,1510147548.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T13:25:48.198Z,1510147548.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:48.591Z,1510147548.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T13:25:48.592Z,1510147548.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:48.989Z,1510147548.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T13:25:48.990Z,1510147548.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:49.389Z,1510147549.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T13:25:49.390Z,1510147549.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:49.794Z,1510147549.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T13:25:49.795Z,1510147549.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:50.167Z,1510147550.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T13:25:50.168Z,1510147550.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:50.592Z,1510147550.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T13:25:50.593Z,1510147550.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:50.967Z,1510147550.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T13:25:50.969Z,1510147550.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:51.367Z,1510147551.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T13:25:51.368Z,1510147551.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:51.771Z,1510147551.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T13:25:51.772Z,1510147551.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:52.175Z,1510147552.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T13:25:52.176Z,1510147552.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:52.599Z,1510147552.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T13:25:52.600Z,1510147552.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:53.015Z,1510147553.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T13:25:53.016Z,1510147553.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:53.410Z,1510147553.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T13:25:53.411Z,1510147553.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:53.798Z,1510147553.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T13:25:53.799Z,1510147553.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:54.176Z,1510147554.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T13:25:54.177Z,1510147554.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:54.573Z,1510147554.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T13:25:54.574Z,1510147554.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:54.973Z,1510147554.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T13:25:54.974Z,1510147554.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:55.383Z,1510147555.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T13:25:55.384Z,1510147555.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:55.775Z,1510147555.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T13:25:55.776Z,1510147555.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:56.174Z,1510147556.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T13:25:56.175Z,1510147556.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:56.577Z,1510147556.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T13:25:56.578Z,1510147556.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:56.977Z,1510147556.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T13:25:56.978Z,1510147556.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:57.374Z,1510147557.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T13:25:57.375Z,1510147557.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:57.788Z,1510147557.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T13:25:57.789Z,1510147557.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:58.188Z,1510147558.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T13:25:58.189Z,1510147558.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:58.592Z,1510147558.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T13:25:58.593Z,1510147558.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:58.987Z,1510147558.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T13:25:58.988Z,1510147558.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:59.374Z,1510147559.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T13:25:59.375Z,1510147559.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:25:59.777Z,1510147559.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T13:25:59.778Z,1510147559.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:00.180Z,1510147560.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T13:26:00.181Z,1510147560.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:00.578Z,1510147560.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T13:26:00.579Z,1510147560.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:00.973Z,1510147560.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T13:26:00.974Z,1510147560.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:01.378Z,1510147561.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T13:26:01.379Z,1510147561.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:01.778Z,1510147561.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T13:26:01.779Z,1510147561.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:02.182Z,1510147562.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T13:26:02.183Z,1510147562.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:02.577Z,1510147562.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T13:26:02.578Z,1510147562.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:02.991Z,1510147562.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T13:26:02.992Z,1510147562.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:03.386Z,1510147563.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T13:26:03.387Z,1510147563.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:03.786Z,1510147563.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T13:26:03.787Z,1510147563.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:04.187Z,1510147564.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T13:26:04.188Z,1510147564.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:04.623Z,1510147564.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T13:26:04.624Z,1510147564.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:05.037Z,1510147565.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T13:26:05.038Z,1510147565.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:05.374Z,1510147565.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T13:26:05.375Z,1510147565.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:05.815Z,1510147565.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T13:26:05.816Z,1510147565.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:06.178Z,1510147566.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T13:26:06.179Z,1510147566.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:06.616Z,1510147566.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:06.975Z,1510147566.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:07.377Z,1510147567.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:07.776Z,1510147567.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:08.192Z,1510147568.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:08.586Z,1510147568.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:08.991Z,1510147568.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:09.386Z,1510147569.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:09.778Z,1510147569.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:10.178Z,1510147570.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:10.575Z,1510147570.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:10.978Z,1510147570.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:11.378Z,1510147571.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:11.780Z,1510147571.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:12.179Z,1510147572.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:12.576Z,1510147572.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:12.988Z,1510147572.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:13.396Z,1510147573.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:13.791Z,1510147573.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:14.188Z,1510147574.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:14.596Z,1510147574.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:15.018Z,1510147575.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:15.379Z,1510147575.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:15.779Z,1510147575.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:16.187Z,1510147576.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:16.576Z,1510147576.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:16.980Z,1510147576.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:17.381Z,1510147577.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:17.780Z,1510147577.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:18.180Z,1510147578.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:18.592Z,1510147578.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:18.993Z,1510147578.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:19.392Z,1510147579.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:19.793Z,1510147579.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:20.180Z,1510147580.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:20.579Z,1510147580.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:20.985Z,1510147580.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:21.379Z,1510147581.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:21.779Z,1510147581.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:22.190Z,1510147582.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:22.579Z,1510147582.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:22.979Z,1510147582.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:23.389Z,1510147583.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:23.792Z,1510147583.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:24.192Z,1510147584.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:24.603Z,1510147584.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:24.994Z,1510147584.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:25.380Z,1510147585.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:25.788Z,1510147585.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:26.180Z,1510147586.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:26.588Z,1510147586.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:27.035Z,1510147587.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:27.386Z,1510147587.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:27.804Z,1510147587.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:28.184Z,1510147588.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:28.608Z,1510147588.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:28.996Z,1510147588.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:29.393Z,1510147589.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:29.798Z,1510147589.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:30.202Z,1510147590.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:30.575Z,1510147590.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:30.975Z,1510147590.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:31.374Z,1510147591.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:31.774Z,1510147591.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:32.176Z,1510147592.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:32.574Z,1510147592.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:32.975Z,1510147592.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:33.375Z,1510147593.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:33.778Z,1510147593.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:34.186Z,1510147594.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:34.587Z,1510147594.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:34.986Z,1510147594.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:35.386Z,1510147595.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:35.775Z,1510147595.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:36.173Z,1510147596.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:36.574Z,1510147596.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:37.011Z,1510147597.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:37.374Z,1510147597.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:37.774Z,1510147597.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:38.174Z,1510147598.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:38.578Z,1510147598.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:38.974Z,1510147598.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:39.386Z,1510147599.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:39.781Z,1510147599.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:40.211Z,1510147600.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:40.582Z,1510147600.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:40.586Z,1510147600.586 [Startup:StartupSatComms:B](INFO): Timed out from 2017-11-08T13:25:40.6Z
2017-11-08T13:26:40.586Z,1510147600.586 [Startup:StartupSatComms:B] Stopped
2017-11-08T13:26:40.586Z,1510147600.586 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2017-11-08T13:26:40.586Z,1510147600.586 [Startup:StartupSatComms] Stopped
2017-11-08T13:26:40.586Z,1510147600.586 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2017-11-08T13:26:40.587Z,1510147600.587 [Startup](INFO): Completed Startup
2017-11-08T13:26:40.587Z,1510147600.587 [MissionManager](INFO): Startup is completed.
2017-11-08T13:26:40.588Z,1510147600.588 [MissionManager](INFO): Uninitializing Mission Startup
2017-11-08T13:26:40.588Z,1510147600.588 [Startup] Stopped
2017-11-08T13:26:40.588Z,1510147600.588 [Startup](DEBUG): Aggregate::uninitialize Startup
2017-11-08T13:26:40.588Z,1510147600.588 [Startup:A.GoToSurface] Stopped
2017-11-08T13:26:40.588Z,1510147600.588 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2017-11-08T13:26:40.977Z,1510147600.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:40.980Z,1510147600.980 [MissionManager](IMPORTANT): Started mission Default
2017-11-08T13:26:40.980Z,1510147600.980 [Default] Running Loop=1
2017-11-08T13:26:40.980Z,1510147600.980 [Default](DEBUG): Aggregate::initialize Default
2017-11-08T13:26:40.980Z,1510147600.980 [Default:B.GoToSurface] Running Loop=1
2017-11-08T13:26:40.980Z,1510147600.980 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-11-08T13:26:40.980Z,1510147600.980 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-11-08T13:26:40.981Z,1510147600.981 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-11-08T13:26:40.981Z,1510147600.981 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-11-08T13:26:40.981Z,1510147600.981 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-11-08T13:26:40.982Z,1510147600.982 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-11-08T13:26:40.982Z,1510147600.982 [Default:A.Wait] Running Loop=1
2017-11-08T13:26:40.982Z,1510147600.982 [Default:A.Wait](DEBUG): Initialize Wait Component.
2017-11-08T13:26:41.376Z,1510147601.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:41.779Z,1510147601.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:42.177Z,1510147602.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:42.578Z,1510147602.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:42.977Z,1510147602.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:43.383Z,1510147603.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:43.778Z,1510147603.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:44.175Z,1510147604.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:44.591Z,1510147604.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:44.995Z,1510147604.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:45.386Z,1510147605.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:45.791Z,1510147605.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:46.183Z,1510147606.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:46.578Z,1510147606.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:46.983Z,1510147606.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:47.378Z,1510147607.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:47.778Z,1510147607.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:48.177Z,1510147608.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:48.579Z,1510147608.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:49.047Z,1510147609.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:49.382Z,1510147609.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:49.827Z,1510147609.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:50.188Z,1510147610.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:50.621Z,1510147610.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:50.992Z,1510147610.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:51.379Z,1510147611.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:51.776Z,1510147611.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:52.181Z,1510147612.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:52.577Z,1510147612.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:52.981Z,1510147612.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:53.382Z,1510147613.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:53.782Z,1510147613.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:54.182Z,1510147614.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:54.186Z,1510147614.186 [Default:A.Wait](INFO): Done Waiting.
2017-11-08T13:26:54.186Z,1510147614.186 [Default:A.Wait] Stopped
2017-11-08T13:26:54.186Z,1510147614.186 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T13:26:54.583Z,1510147614.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:54.587Z,1510147614.587 [Default:CheckIn] Running Loop=1
2017-11-08T13:26:54.587Z,1510147614.587 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T13:26:54.587Z,1510147614.587 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T13:26:54.989Z,1510147614.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:54.992Z,1510147614.992 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2017-11-08T13:26:55.391Z,1510147615.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:55.794Z,1510147615.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:56.191Z,1510147616.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:56.579Z,1510147616.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:56.988Z,1510147616.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:57.376Z,1510147617.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:57.781Z,1510147617.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:58.183Z,1510147618.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:58.575Z,1510147618.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:59.001Z,1510147619.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:59.384Z,1510147619.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:26:59.775Z,1510147619.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:00.192Z,1510147620.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:00.593Z,1510147620.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:00.993Z,1510147620.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:01.386Z,1510147621.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:01.782Z,1510147621.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:02.179Z,1510147622.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:02.581Z,1510147622.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:02.982Z,1510147622.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:03.379Z,1510147623.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:03.779Z,1510147623.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:04.187Z,1510147624.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:04.575Z,1510147624.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:04.979Z,1510147624.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:05.403Z,1510147625.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:05.792Z,1510147625.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:06.192Z,1510147626.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:06.593Z,1510147626.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:06.977Z,1510147626.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:07.390Z,1510147627.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:07.783Z,1510147627.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:08.187Z,1510147628.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:08.587Z,1510147628.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:08.983Z,1510147628.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:09.381Z,1510147629.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:09.781Z,1510147629.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:10.174Z,1510147630.174 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-08T13:27:10.174Z,1510147630.174 [BPC1] Data Fault, FailCount= 1
2017-11-08T13:27:10.174Z,1510147630.174 [BPC1](ERROR): Data Fault
2017-11-08T13:27:10.184Z,1510147630.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:10.261Z,1510147630.261 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T13:27:10.603Z,1510147630.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:10.992Z,1510147630.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:11.395Z,1510147631.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:11.473Z,1510147631.473 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T13:27:11.473Z,1510147631.473 [BPC1] No Fault, FailCount= 1
2017-11-08T13:27:11.851Z,1510147631.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:12.187Z,1510147632.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:12.588Z,1510147632.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:12.988Z,1510147632.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:13.390Z,1510147633.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:13.791Z,1510147633.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:14.179Z,1510147634.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:14.594Z,1510147634.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:14.967Z,1510147634.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:15.392Z,1510147635.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:15.795Z,1510147635.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:16.193Z,1510147636.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:16.603Z,1510147636.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:16.999Z,1510147636.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:17.371Z,1510147637.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:17.776Z,1510147637.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:18.176Z,1510147638.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:18.569Z,1510147638.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:18.976Z,1510147638.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:19.376Z,1510147639.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:19.768Z,1510147639.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:20.220Z,1510147640.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:20.576Z,1510147640.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:21.007Z,1510147641.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:21.401Z,1510147641.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:21.803Z,1510147641.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:22.201Z,1510147642.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:22.576Z,1510147642.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:22.976Z,1510147642.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:23.375Z,1510147643.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:23.772Z,1510147643.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:24.176Z,1510147644.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:24.568Z,1510147644.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:24.976Z,1510147644.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:25.376Z,1510147645.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:25.770Z,1510147645.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:26.209Z,1510147646.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:26.600Z,1510147646.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:27.000Z,1510147647.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:27.398Z,1510147647.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:27.776Z,1510147647.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:28.175Z,1510147648.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:28.576Z,1510147648.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:28.976Z,1510147648.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:29.376Z,1510147649.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:29.776Z,1510147649.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:30.176Z,1510147650.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:30.576Z,1510147650.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:30.976Z,1510147650.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:31.407Z,1510147651.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:31.806Z,1510147651.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:32.255Z,1510147652.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:32.587Z,1510147652.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:32.983Z,1510147652.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:33.419Z,1510147653.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:33.778Z,1510147653.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:34.208Z,1510147654.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:34.581Z,1510147654.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:34.978Z,1510147654.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:35.378Z,1510147655.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:35.778Z,1510147655.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:36.180Z,1510147656.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:36.586Z,1510147656.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:36.986Z,1510147656.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:37.388Z,1510147657.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:37.790Z,1510147657.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:38.177Z,1510147658.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:38.577Z,1510147658.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:38.978Z,1510147658.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:39.378Z,1510147659.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:39.777Z,1510147659.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:40.181Z,1510147660.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:40.583Z,1510147660.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:40.981Z,1510147660.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:41.378Z,1510147661.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:41.791Z,1510147661.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:42.187Z,1510147662.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:42.609Z,1510147662.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:42.986Z,1510147662.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:43.376Z,1510147663.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:43.780Z,1510147663.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:44.179Z,1510147664.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:44.579Z,1510147664.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:44.976Z,1510147664.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:45.377Z,1510147665.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:45.780Z,1510147665.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:46.179Z,1510147666.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:46.576Z,1510147666.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:46.992Z,1510147666.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:47.390Z,1510147667.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:47.787Z,1510147667.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:48.188Z,1510147668.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:48.579Z,1510147668.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:48.979Z,1510147668.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:49.380Z,1510147669.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:49.779Z,1510147669.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:50.179Z,1510147670.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:50.588Z,1510147670.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:50.979Z,1510147670.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:51.374Z,1510147671.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:51.778Z,1510147671.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:52.188Z,1510147672.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:52.588Z,1510147672.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:52.992Z,1510147672.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:53.386Z,1510147673.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:53.778Z,1510147673.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:54.227Z,1510147674.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:54.625Z,1510147674.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:54.975Z,1510147674.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:55.420Z,1510147675.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:55.778Z,1510147675.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:56.224Z,1510147676.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:56.583Z,1510147676.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:56.980Z,1510147676.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:57.388Z,1510147677.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:57.788Z,1510147677.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:58.173Z,1510147678.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:27:58.188Z,1510147678.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:58.575Z,1510147678.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:27:58.595Z,1510147678.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:58.955Z,1510147678.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:27:58.991Z,1510147678.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:59.351Z,1510147679.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:27:59.378Z,1510147679.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:27:59.751Z,1510147679.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:27:59.776Z,1510147679.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:00.165Z,1510147680.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:28:00.182Z,1510147680.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:00.576Z,1510147680.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:00.979Z,1510147680.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:01.378Z,1510147681.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:01.755Z,1510147681.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:28:01.782Z,1510147681.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:02.151Z,1510147682.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:28:02.176Z,1510147682.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:02.576Z,1510147682.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:28:02.593Z,1510147682.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:02.976Z,1510147682.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:28:02.992Z,1510147682.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:03.377Z,1510147683.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:28:03.393Z,1510147683.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:03.772Z,1510147683.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:28:03.788Z,1510147683.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:04.151Z,1510147684.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:28:04.183Z,1510147684.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:04.551Z,1510147684.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:28:04.608Z,1510147684.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:04.965Z,1510147684.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:28:04.982Z,1510147684.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:05.376Z,1510147685.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:05.779Z,1510147685.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:06.179Z,1510147686.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:06.580Z,1510147686.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:06.975Z,1510147686.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:07.378Z,1510147687.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:07.788Z,1510147687.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:08.189Z,1510147688.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:08.599Z,1510147688.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:08.988Z,1510147688.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:09.375Z,1510147689.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:09.788Z,1510147689.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:10.177Z,1510147690.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:10.579Z,1510147690.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:10.987Z,1510147690.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:11.382Z,1510147691.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:11.780Z,1510147691.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:12.190Z,1510147692.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:12.578Z,1510147692.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:12.000Z,1510147693.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:13.392Z,1510147693.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:13.799Z,1510147693.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:14.190Z,1510147694.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:14.588Z,1510147694.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:14.982Z,1510147694.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:15.379Z,1510147695.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:15.779Z,1510147695.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:16.182Z,1510147696.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:16.579Z,1510147696.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:16.979Z,1510147696.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:17.396Z,1510147697.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:17.779Z,1510147697.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:18.191Z,1510147698.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:18.592Z,1510147698.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:18.992Z,1510147698.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:19.393Z,1510147699.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:19.763Z,1510147699.763 [BPC1](ERROR): Failed to receive battery data
2017-11-08T13:28:19.763Z,1510147699.763 [BPC1] Communications Fault, FailCount= 1
2017-11-08T13:28:19.763Z,1510147699.763 [BPC1](ERROR): Communications Fault
2017-11-08T13:28:19.796Z,1510147699.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:19.873Z,1510147699.873 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T13:28:20.191Z,1510147700.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:20.588Z,1510147700.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:20.990Z,1510147700.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:21.065Z,1510147701.065 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T13:28:21.065Z,1510147701.065 [BPC1] No Fault, FailCount= 1
2017-11-08T13:28:21.435Z,1510147701.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:21.794Z,1510147701.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:22.172Z,1510147702.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:22.572Z,1510147702.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:22.968Z,1510147702.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:23.397Z,1510147703.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:23.799Z,1510147703.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:24.204Z,1510147704.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:24.595Z,1510147704.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:24.973Z,1510147704.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:25.372Z,1510147705.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:25.786Z,1510147705.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:26.176Z,1510147706.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:26.588Z,1510147706.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:26.975Z,1510147706.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:27.343Z,1510147707.343 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-08T13:28:27.377Z,1510147707.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:27.774Z,1510147707.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:28.207Z,1510147708.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:28.584Z,1510147708.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:29.003Z,1510147709.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:29.375Z,1510147709.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:29.812Z,1510147709.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:30.175Z,1510147710.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:30.579Z,1510147710.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:31.003Z,1510147711.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:31.388Z,1510147711.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:31.786Z,1510147711.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:32.175Z,1510147712.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:32.573Z,1510147712.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:32.975Z,1510147712.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:33.375Z,1510147713.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:33.809Z,1510147713.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:34.185Z,1510147714.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:34.586Z,1510147714.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:34.976Z,1510147714.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:35.378Z,1510147715.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:35.776Z,1510147715.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:36.183Z,1510147716.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:36.585Z,1510147716.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:36.986Z,1510147716.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:37.375Z,1510147717.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:37.777Z,1510147717.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:38.178Z,1510147718.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:38.578Z,1510147718.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:38.985Z,1510147718.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:39.386Z,1510147719.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:39.782Z,1510147719.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:40.227Z,1510147720.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:40.576Z,1510147720.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:40.976Z,1510147720.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:41.378Z,1510147721.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:41.819Z,1510147721.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:42.181Z,1510147722.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:42.611Z,1510147722.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:42.986Z,1510147722.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:43.377Z,1510147723.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:43.777Z,1510147723.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:44.176Z,1510147724.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:44.575Z,1510147724.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:44.989Z,1510147724.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:45.386Z,1510147725.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:45.787Z,1510147725.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:46.178Z,1510147726.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:46.577Z,1510147726.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:46.976Z,1510147726.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:47.378Z,1510147727.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:47.776Z,1510147727.776 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:47.776Z,1510147727.776 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-11-08T13:28:47.776Z,1510147727.776 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T13:28:47.778Z,1510147727.778 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:47.778Z,1510147727.778 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2017-11-08T13:28:47.778Z,1510147727.778 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T13:28:47.780Z,1510147727.780 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:47.780Z,1510147727.780 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-11-08T13:28:47.780Z,1510147727.780 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T13:28:47.853Z,1510147727.853 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T13:28:47.853Z,1510147727.853 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T13:28:47.854Z,1510147727.854 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T13:28:48.269Z,1510147728.269 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T13:28:48.269Z,1510147728.269 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-11-08T13:28:48.269Z,1510147728.269 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T13:28:48.269Z,1510147728.269 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2017-11-08T13:28:48.270Z,1510147728.270 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T13:28:48.270Z,1510147728.270 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-11-08T13:28:48.592Z,1510147728.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T13:28:48.597Z,1510147728.597 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:28:48.597Z,1510147728.597 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:28:48.597Z,1510147728.597 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T13:28:48.598Z,1510147728.598 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:28:48.598Z,1510147728.598 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:28:48.598Z,1510147728.598 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T13:28:48.599Z,1510147728.599 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:28:48.599Z,1510147728.599 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:28:48.988Z,1510147728.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T13:28:48.989Z,1510147728.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:49.378Z,1510147729.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T13:28:49.379Z,1510147729.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:49.786Z,1510147729.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T13:28:49.787Z,1510147729.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:50.181Z,1510147730.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T13:28:50.182Z,1510147730.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:50.578Z,1510147730.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T13:28:50.579Z,1510147730.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:51.031Z,1510147731.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2017-11-08T13:28:51.032Z,1510147731.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:51.392Z,1510147731.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T13:28:51.393Z,1510147731.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:51.787Z,1510147731.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T13:28:51.788Z,1510147731.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:52.191Z,1510147732.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T13:28:52.192Z,1510147732.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:52.581Z,1510147732.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T13:28:52.582Z,1510147732.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:52.982Z,1510147732.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T13:28:52.983Z,1510147732.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:53.385Z,1510147733.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T13:28:53.386Z,1510147733.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:53.781Z,1510147733.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T13:28:53.782Z,1510147733.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:54.187Z,1510147734.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T13:28:54.188Z,1510147734.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:54.592Z,1510147734.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T13:28:54.593Z,1510147734.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:54.995Z,1510147734.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T13:28:54.996Z,1510147734.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:55.377Z,1510147735.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T13:28:55.378Z,1510147735.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:55.789Z,1510147735.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T13:28:55.790Z,1510147735.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:56.179Z,1510147736.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T13:28:56.180Z,1510147736.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:56.580Z,1510147736.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T13:28:56.581Z,1510147736.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:56.993Z,1510147736.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T13:28:56.994Z,1510147736.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:57.387Z,1510147737.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T13:28:57.388Z,1510147737.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:57.791Z,1510147737.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T13:28:57.792Z,1510147737.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:58.190Z,1510147738.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T13:28:58.191Z,1510147738.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:58.581Z,1510147738.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T13:28:58.582Z,1510147738.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:58.979Z,1510147738.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T13:28:58.980Z,1510147738.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:59.387Z,1510147739.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T13:28:59.388Z,1510147739.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:28:59.787Z,1510147739.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T13:28:59.788Z,1510147739.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:00.199Z,1510147740.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T13:29:00.200Z,1510147740.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:00.598Z,1510147740.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T13:29:00.599Z,1510147740.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:00.992Z,1510147740.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T13:29:00.993Z,1510147740.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:01.389Z,1510147741.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T13:29:01.390Z,1510147741.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:01.807Z,1510147741.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T13:29:01.808Z,1510147741.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:02.187Z,1510147742.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T13:29:02.188Z,1510147742.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:02.587Z,1510147742.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T13:29:02.588Z,1510147742.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:03.038Z,1510147743.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T13:29:03.039Z,1510147743.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:03.393Z,1510147743.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T13:29:03.394Z,1510147743.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:03.795Z,1510147743.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T13:29:03.796Z,1510147743.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:04.230Z,1510147744.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T13:29:04.231Z,1510147744.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:04.594Z,1510147744.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T13:29:04.595Z,1510147744.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:05.015Z,1510147745.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T13:29:05.016Z,1510147745.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:05.387Z,1510147745.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T13:29:05.387Z,1510147745.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:05.783Z,1510147745.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T13:29:05.784Z,1510147745.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:06.188Z,1510147746.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T13:29:06.189Z,1510147746.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:06.592Z,1510147746.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T13:29:06.593Z,1510147746.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:06.994Z,1510147746.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T13:29:06.995Z,1510147746.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:07.390Z,1510147747.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T13:29:07.390Z,1510147747.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:07.783Z,1510147747.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:08.193Z,1510147748.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:08.594Z,1510147748.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:08.982Z,1510147748.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:08.998Z,1510147748.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:09.370Z,1510147749.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:09.403Z,1510147749.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:09.766Z,1510147749.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:09.792Z,1510147749.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:10.151Z,1510147750.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:10.167Z,1510147750.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:10.559Z,1510147750.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:10.592Z,1510147750.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:10.955Z,1510147750.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:10.976Z,1510147750.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:11.360Z,1510147751.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:11.376Z,1510147751.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:11.759Z,1510147751.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:11.776Z,1510147751.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:12.170Z,1510147752.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:12.200Z,1510147752.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:12.603Z,1510147752.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:12.999Z,1510147752.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:13.406Z,1510147753.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:13.759Z,1510147753.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:13.776Z,1510147753.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:14.159Z,1510147754.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:14.176Z,1510147754.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:14.558Z,1510147754.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:14.575Z,1510147754.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:14.000Z,1510147755.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:15.397Z,1510147755.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:15.802Z,1510147755.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:16.170Z,1510147756.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:16.575Z,1510147756.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:16.975Z,1510147756.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:17.375Z,1510147757.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:17.775Z,1510147757.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:18.202Z,1510147758.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:18.603Z,1510147758.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:19.002Z,1510147759.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:19.374Z,1510147759.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:19.774Z,1510147759.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:20.176Z,1510147760.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:20.574Z,1510147760.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:21.003Z,1510147761.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:21.404Z,1510147761.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:21.803Z,1510147761.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:22.176Z,1510147762.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:22.576Z,1510147762.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:22.975Z,1510147762.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:23.364Z,1510147763.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:23.381Z,1510147763.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:23.758Z,1510147763.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:23.827Z,1510147763.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:24.166Z,1510147764.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:24.182Z,1510147764.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:24.570Z,1510147764.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:24.609Z,1510147764.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:24.974Z,1510147764.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:25.011Z,1510147765.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:25.361Z,1510147765.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:25.439Z,1510147765.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:25.759Z,1510147765.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:25.775Z,1510147765.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:26.162Z,1510147766.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:26.214Z,1510147766.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:26.563Z,1510147766.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:26.579Z,1510147766.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:26.970Z,1510147766.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:27.009Z,1510147767.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:27.371Z,1510147767.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:27.387Z,1510147767.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:27.766Z,1510147767.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:27.783Z,1510147767.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:28.158Z,1510147768.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:28.175Z,1510147768.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:28.561Z,1510147768.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:28.578Z,1510147768.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:28.960Z,1510147768.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:28.980Z,1510147768.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:29.362Z,1510147769.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:29.378Z,1510147769.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:29.761Z,1510147769.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:29.777Z,1510147769.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:30.166Z,1510147770.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:30.188Z,1510147770.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:30.570Z,1510147770.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:30.585Z,1510147770.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:30.970Z,1510147770.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:30.986Z,1510147770.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:31.360Z,1510147771.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:31.377Z,1510147771.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:31.758Z,1510147771.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:31.774Z,1510147771.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:32.161Z,1510147772.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:32.178Z,1510147772.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:32.561Z,1510147772.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:32.577Z,1510147772.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:32.974Z,1510147772.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:33.012Z,1510147773.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:33.370Z,1510147773.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:33.386Z,1510147773.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:33.766Z,1510147773.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:33.783Z,1510147773.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:34.162Z,1510147774.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:34.178Z,1510147774.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:34.561Z,1510147774.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:34.577Z,1510147774.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:34.960Z,1510147774.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:34.977Z,1510147774.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:35.363Z,1510147775.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:35.406Z,1510147775.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:35.760Z,1510147775.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:35.781Z,1510147775.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:36.174Z,1510147776.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:29:36.206Z,1510147776.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:36.586Z,1510147776.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:36.986Z,1510147776.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:37.377Z,1510147777.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:37.779Z,1510147777.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:38.176Z,1510147778.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:38.578Z,1510147778.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:38.985Z,1510147778.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:39.390Z,1510147779.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:39.783Z,1510147779.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:40.178Z,1510147780.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:40.577Z,1510147780.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:40.979Z,1510147780.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:41.379Z,1510147781.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:41.778Z,1510147781.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:42.183Z,1510147782.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:42.586Z,1510147782.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:42.986Z,1510147782.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:43.377Z,1510147783.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:43.776Z,1510147783.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:44.184Z,1510147784.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:44.578Z,1510147784.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:44.985Z,1510147784.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:45.382Z,1510147785.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:45.790Z,1510147785.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:46.183Z,1510147786.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:46.608Z,1510147786.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:46.984Z,1510147786.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:47.413Z,1510147787.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:47.787Z,1510147787.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:48.223Z,1510147788.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:48.587Z,1510147788.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:49.027Z,1510147789.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:49.378Z,1510147789.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:49.776Z,1510147789.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:50.174Z,1510147790.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:50.587Z,1510147790.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:50.991Z,1510147790.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:51.391Z,1510147791.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:51.786Z,1510147791.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:52.178Z,1510147792.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:52.575Z,1510147792.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:52.979Z,1510147792.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:53.376Z,1510147793.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:53.777Z,1510147793.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:54.186Z,1510147794.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:54.586Z,1510147794.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:54.986Z,1510147794.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:55.387Z,1510147795.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:55.774Z,1510147795.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:56.174Z,1510147796.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:56.578Z,1510147796.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:56.986Z,1510147796.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:57.427Z,1510147797.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:57.787Z,1510147797.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:58.176Z,1510147798.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:58.587Z,1510147798.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:58.977Z,1510147798.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:59.374Z,1510147799.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:29:59.775Z,1510147799.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:00.190Z,1510147800.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:00.591Z,1510147800.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:00.991Z,1510147800.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:01.378Z,1510147801.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:01.778Z,1510147801.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:02.175Z,1510147802.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:02.579Z,1510147802.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:02.991Z,1510147802.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:03.390Z,1510147803.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:03.791Z,1510147803.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:04.176Z,1510147804.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:04.579Z,1510147804.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:04.982Z,1510147804.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:05.388Z,1510147805.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:05.780Z,1510147805.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:06.189Z,1510147806.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:06.592Z,1510147806.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:06.992Z,1510147806.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:07.378Z,1510147807.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:07.778Z,1510147807.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:08.219Z,1510147808.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:08.583Z,1510147808.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:08.988Z,1510147808.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:09.388Z,1510147809.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:09.846Z,1510147809.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:10.178Z,1510147810.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:10.622Z,1510147810.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:10.984Z,1510147810.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:11.404Z,1510147811.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:11.775Z,1510147811.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:12.187Z,1510147812.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:12.595Z,1510147812.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:12.992Z,1510147812.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:13.379Z,1510147813.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:13.778Z,1510147813.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:14.182Z,1510147814.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:14.578Z,1510147814.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:14.995Z,1510147814.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:15.392Z,1510147815.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:15.791Z,1510147815.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:16.178Z,1510147816.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:16.583Z,1510147816.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:16.980Z,1510147816.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:17.379Z,1510147817.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:17.783Z,1510147817.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:18.187Z,1510147818.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:18.591Z,1510147818.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:18.999Z,1510147818.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:19.377Z,1510147819.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:19.801Z,1510147819.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:20.179Z,1510147820.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:20.576Z,1510147820.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:20.992Z,1510147820.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:21.388Z,1510147821.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:21.795Z,1510147821.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:22.175Z,1510147822.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:22.587Z,1510147822.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:22.987Z,1510147822.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:23.380Z,1510147823.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:23.779Z,1510147823.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:24.187Z,1510147824.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:24.591Z,1510147824.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:24.989Z,1510147824.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:25.378Z,1510147825.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:25.778Z,1510147825.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:26.177Z,1510147826.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:26.578Z,1510147826.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:26.991Z,1510147826.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:27.400Z,1510147827.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:27.787Z,1510147827.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:28.178Z,1510147828.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:28.578Z,1510147828.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:28.987Z,1510147828.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:29.388Z,1510147829.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:29.778Z,1510147829.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:30.234Z,1510147830.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:30.595Z,1510147830.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:30.991Z,1510147830.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:31.376Z,1510147831.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:31.778Z,1510147831.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:32.203Z,1510147832.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:32.578Z,1510147832.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:33.024Z,1510147833.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:33.399Z,1510147833.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:33.825Z,1510147833.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:34.179Z,1510147834.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:34.586Z,1510147834.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:34.978Z,1510147834.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:35.382Z,1510147835.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:35.786Z,1510147835.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:36.186Z,1510147836.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:36.599Z,1510147836.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:36.991Z,1510147836.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:37.378Z,1510147837.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:37.780Z,1510147837.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:38.180Z,1510147838.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:38.578Z,1510147838.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:38.999Z,1510147838.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:39.399Z,1510147839.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:39.787Z,1510147839.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:40.183Z,1510147840.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:40.579Z,1510147840.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:40.978Z,1510147840.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:41.391Z,1510147841.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:41.780Z,1510147841.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:42.227Z,1510147842.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:42.599Z,1510147842.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:42.992Z,1510147842.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:43.379Z,1510147843.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:43.782Z,1510147843.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:44.182Z,1510147844.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:44.579Z,1510147844.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:45.003Z,1510147845.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:45.392Z,1510147845.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:45.788Z,1510147845.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:46.180Z,1510147846.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:46.579Z,1510147846.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:46.978Z,1510147846.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:47.407Z,1510147847.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:47.781Z,1510147847.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:48.190Z,1510147848.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:48.593Z,1510147848.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:48.988Z,1510147848.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:49.379Z,1510147849.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:49.785Z,1510147849.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:50.189Z,1510147850.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:50.584Z,1510147850.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:50.993Z,1510147850.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:51.397Z,1510147851.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:51.795Z,1510147851.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:52.188Z,1510147852.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:52.588Z,1510147852.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:52.972Z,1510147852.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:53.370Z,1510147853.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:53.772Z,1510147853.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:54.199Z,1510147854.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:54.624Z,1510147854.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:54.994Z,1510147854.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:55.408Z,1510147855.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:55.771Z,1510147855.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:56.207Z,1510147856.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:56.589Z,1510147856.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:56.997Z,1510147856.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:57.393Z,1510147857.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:57.796Z,1510147857.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:58.169Z,1510147858.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:58.575Z,1510147858.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:58.974Z,1510147858.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:59.376Z,1510147859.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:30:59.774Z,1510147859.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:00.194Z,1510147860.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:00.596Z,1510147860.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:00.990Z,1510147860.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:01.375Z,1510147861.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:01.770Z,1510147861.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:02.182Z,1510147862.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:02.582Z,1510147862.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:02.987Z,1510147862.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:03.388Z,1510147863.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:03.788Z,1510147863.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:04.174Z,1510147864.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:04.615Z,1510147864.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:04.978Z,1510147864.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:05.379Z,1510147865.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:05.783Z,1510147865.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:06.187Z,1510147866.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:06.587Z,1510147866.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:06.992Z,1510147866.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:07.383Z,1510147867.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:07.774Z,1510147867.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:08.178Z,1510147868.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:08.577Z,1510147868.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:08.989Z,1510147868.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:09.391Z,1510147869.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:09.786Z,1510147869.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:10.177Z,1510147870.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:10.588Z,1510147870.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:10.979Z,1510147870.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:11.384Z,1510147871.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:11.779Z,1510147871.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:12.191Z,1510147872.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:12.595Z,1510147872.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:12.991Z,1510147872.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:13.379Z,1510147873.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:13.782Z,1510147873.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:14.179Z,1510147874.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:14.577Z,1510147874.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:14.995Z,1510147874.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:15.395Z,1510147875.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:15.788Z,1510147875.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:16.179Z,1510147876.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:16.627Z,1510147876.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:17.001Z,1510147877.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:17.380Z,1510147877.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:17.825Z,1510147877.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:18.188Z,1510147878.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:18.618Z,1510147878.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:18.992Z,1510147878.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:19.379Z,1510147879.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:19.776Z,1510147879.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:20.184Z,1510147880.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:20.587Z,1510147880.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:20.992Z,1510147880.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:21.392Z,1510147881.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:21.791Z,1510147881.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:22.175Z,1510147882.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:22.583Z,1510147882.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:22.987Z,1510147882.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:23.382Z,1510147883.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:23.779Z,1510147883.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:24.188Z,1510147884.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:24.592Z,1510147884.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:24.991Z,1510147884.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:25.379Z,1510147885.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:25.779Z,1510147885.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:26.180Z,1510147886.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:26.584Z,1510147886.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:27.025Z,1510147887.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:27.392Z,1510147887.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:27.788Z,1510147887.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:28.182Z,1510147888.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:28.579Z,1510147888.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:28.987Z,1510147888.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:29.387Z,1510147889.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:29.778Z,1510147889.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:30.188Z,1510147890.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:30.592Z,1510147890.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:30.991Z,1510147890.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:31.387Z,1510147891.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:31.780Z,1510147891.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:32.203Z,1510147892.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:32.580Z,1510147892.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:32.993Z,1510147892.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:33.399Z,1510147893.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:33.793Z,1510147893.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:34.181Z,1510147894.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:34.587Z,1510147894.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:34.980Z,1510147894.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:35.381Z,1510147895.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:35.780Z,1510147895.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:36.192Z,1510147896.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:36.599Z,1510147896.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:36.988Z,1510147896.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:37.386Z,1510147897.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:37.783Z,1510147897.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:38.180Z,1510147898.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:38.579Z,1510147898.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:39.046Z,1510147899.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:39.392Z,1510147899.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:39.823Z,1510147899.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:40.180Z,1510147900.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:40.607Z,1510147900.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:40.980Z,1510147900.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:41.381Z,1510147901.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:41.785Z,1510147901.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:42.189Z,1510147902.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:42.593Z,1510147902.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:42.993Z,1510147902.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:43.380Z,1510147903.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:43.782Z,1510147903.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:44.191Z,1510147904.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:44.584Z,1510147904.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:44.990Z,1510147904.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:45.390Z,1510147905.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:45.793Z,1510147905.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:46.185Z,1510147906.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:46.585Z,1510147906.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:46.985Z,1510147906.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:47.385Z,1510147907.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:47.785Z,1510147907.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:48.189Z,1510147908.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:48.589Z,1510147908.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:49.027Z,1510147909.027 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:49.027Z,1510147909.027 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-11-08T13:31:49.027Z,1510147909.027 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T13:31:49.029Z,1510147909.029 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:49.029Z,1510147909.029 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2017-11-08T13:31:49.029Z,1510147909.029 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T13:31:49.031Z,1510147909.031 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:49.031Z,1510147909.031 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-11-08T13:31:49.031Z,1510147909.031 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T13:31:49.109Z,1510147909.109 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T13:31:49.109Z,1510147909.109 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T13:31:49.109Z,1510147909.109 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T13:31:49.474Z,1510147909.474 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T13:31:49.474Z,1510147909.474 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-11-08T13:31:49.474Z,1510147909.474 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T13:31:49.474Z,1510147909.474 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2017-11-08T13:31:49.475Z,1510147909.475 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T13:31:49.475Z,1510147909.475 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-11-08T13:31:49.791Z,1510147909.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T13:31:49.791Z,1510147909.791 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:31:49.792Z,1510147909.792 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:31:49.792Z,1510147909.792 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T13:31:49.793Z,1510147909.793 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:31:49.793Z,1510147909.793 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:31:49.793Z,1510147909.793 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T13:31:49.794Z,1510147909.794 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:31:49.794Z,1510147909.794 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:31:50.168Z,1510147910.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.1 s old, using for 20.0 s.
2017-11-08T13:31:50.181Z,1510147910.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:50.593Z,1510147910.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T13:31:50.594Z,1510147910.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:50.995Z,1510147910.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T13:31:50.996Z,1510147910.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:51.393Z,1510147911.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T13:31:51.394Z,1510147911.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:51.793Z,1510147911.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T13:31:51.794Z,1510147911.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:52.171Z,1510147912.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.1 s old, using for 20.0 s.
2017-11-08T13:31:52.172Z,1510147912.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:52.572Z,1510147912.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2017-11-08T13:31:52.589Z,1510147912.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:52.976Z,1510147912.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-11-08T13:31:52.993Z,1510147912.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:53.375Z,1510147913.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2017-11-08T13:31:53.376Z,1510147913.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:53.776Z,1510147913.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2017-11-08T13:31:53.777Z,1510147913.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:54.201Z,1510147914.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T13:31:54.202Z,1510147914.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:54.599Z,1510147914.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T13:31:54.600Z,1510147914.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:54.603Z,1510147914.603 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T13:26:54.6Z
2017-11-08T13:31:54.603Z,1510147914.603 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T13:31:54.603Z,1510147914.603 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T13:31:55.000Z,1510147915.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T13:31:55.001Z,1510147915.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:55.005Z,1510147915.005 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-11-08T13:31:55.376Z,1510147915.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2017-11-08T13:31:55.377Z,1510147915.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:55.775Z,1510147915.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2017-11-08T13:31:55.776Z,1510147915.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:56.176Z,1510147916.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2017-11-08T13:31:56.177Z,1510147916.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:56.576Z,1510147916.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2017-11-08T13:31:56.577Z,1510147916.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:56.974Z,1510147916.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2017-11-08T13:31:56.975Z,1510147916.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:57.375Z,1510147917.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2017-11-08T13:31:57.376Z,1510147917.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:57.775Z,1510147917.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2017-11-08T13:31:57.776Z,1510147917.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:58.175Z,1510147918.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2017-11-08T13:31:58.176Z,1510147918.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:58.575Z,1510147918.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2017-11-08T13:31:58.576Z,1510147918.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:58.975Z,1510147918.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2017-11-08T13:31:58.976Z,1510147918.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:59.374Z,1510147919.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2017-11-08T13:31:59.375Z,1510147919.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:31:59.826Z,1510147919.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T13:31:59.827Z,1510147919.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:00.175Z,1510147920.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2017-11-08T13:32:00.175Z,1510147920.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:00.574Z,1510147920.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2017-11-08T13:32:00.574Z,1510147920.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:01.026Z,1510147921.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T13:32:01.027Z,1510147921.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:01.374Z,1510147921.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2017-11-08T13:32:01.375Z,1510147921.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:01.774Z,1510147921.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2017-11-08T13:32:01.775Z,1510147921.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:02.215Z,1510147922.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T13:32:02.216Z,1510147922.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:02.574Z,1510147922.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2017-11-08T13:32:02.575Z,1510147922.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:03.008Z,1510147923.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T13:32:03.009Z,1510147923.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:03.374Z,1510147923.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2017-11-08T13:32:03.375Z,1510147923.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:03.774Z,1510147923.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2017-11-08T13:32:03.775Z,1510147923.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:04.172Z,1510147924.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2017-11-08T13:32:04.173Z,1510147924.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:04.576Z,1510147924.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2017-11-08T13:32:04.577Z,1510147924.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:04.978Z,1510147924.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T13:32:04.979Z,1510147924.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:05.373Z,1510147925.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2017-11-08T13:32:05.374Z,1510147925.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:05.772Z,1510147925.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2017-11-08T13:32:05.773Z,1510147925.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:06.174Z,1510147926.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2017-11-08T13:32:06.175Z,1510147926.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:06.573Z,1510147926.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2017-11-08T13:32:06.574Z,1510147926.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:06.973Z,1510147926.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2017-11-08T13:32:06.974Z,1510147926.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:07.373Z,1510147927.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2017-11-08T13:32:07.374Z,1510147927.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:07.776Z,1510147927.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2017-11-08T13:32:07.777Z,1510147927.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:08.177Z,1510147928.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T13:32:08.178Z,1510147928.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:08.577Z,1510147928.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2017-11-08T13:32:08.577Z,1510147928.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:08.975Z,1510147928.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2017-11-08T13:32:08.976Z,1510147928.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:09.374Z,1510147929.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:09.779Z,1510147929.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:10.176Z,1510147930.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:10.576Z,1510147930.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:10.974Z,1510147930.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:11.416Z,1510147931.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:11.776Z,1510147931.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:12.177Z,1510147932.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:12.576Z,1510147932.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:12.983Z,1510147932.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:13.377Z,1510147933.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:13.774Z,1510147933.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:14.176Z,1510147934.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:14.578Z,1510147934.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:14.977Z,1510147934.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:15.376Z,1510147935.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:15.775Z,1510147935.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:16.177Z,1510147936.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:16.577Z,1510147936.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:16.976Z,1510147936.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:17.377Z,1510147937.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:17.777Z,1510147937.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:18.176Z,1510147938.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:18.578Z,1510147938.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:18.977Z,1510147938.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:19.378Z,1510147939.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:19.778Z,1510147939.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:20.179Z,1510147940.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:20.577Z,1510147940.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:20.983Z,1510147940.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:21.377Z,1510147941.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:21.777Z,1510147941.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:22.216Z,1510147942.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:22.582Z,1510147942.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:22.978Z,1510147942.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:23.421Z,1510147943.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:23.778Z,1510147943.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:24.177Z,1510147944.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:24.600Z,1510147944.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:24.978Z,1510147944.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:25.338Z,1510147945.338 [NAL9602](ERROR): Queried for signal strength and failed to receive proper response. 
2017-11-08T13:32:25.417Z,1510147945.417 [NAL9602](ERROR): received: 
+CSQ:0

OK
2017-11-08T13:32:25.417Z,1510147945.417 [NAL9602] Data Fault, FailCount= 1
2017-11-08T13:32:25.417Z,1510147945.417 [NAL9602](ERROR): Data Fault
2017-11-08T13:32:25.482Z,1510147945.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:25.561Z,1510147945.561 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T13:32:25.738Z,1510147945.738 [NAL9602](INFO): Powering down
2017-11-08T13:32:25.787Z,1510147945.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:26.177Z,1510147946.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:26.576Z,1510147946.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:26.660Z,1510147946.660 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T13:32:26.661Z,1510147946.661 [NAL9602] No Fault, FailCount= 1
2017-11-08T13:32:26.976Z,1510147946.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:27.377Z,1510147947.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:27.776Z,1510147947.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:28.176Z,1510147948.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:28.573Z,1510147948.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:28.976Z,1510147948.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:29.376Z,1510147949.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:29.777Z,1510147949.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:30.176Z,1510147950.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:30.576Z,1510147950.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:30.977Z,1510147950.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:31.376Z,1510147951.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:31.777Z,1510147951.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:32.177Z,1510147952.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:32.576Z,1510147952.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:32.983Z,1510147952.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:33.373Z,1510147953.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:33.818Z,1510147953.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:34.187Z,1510147954.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:34.577Z,1510147954.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:34.977Z,1510147954.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:35.382Z,1510147955.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:35.778Z,1510147955.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:36.177Z,1510147956.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:36.577Z,1510147956.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:36.978Z,1510147956.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:37.377Z,1510147957.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:37.777Z,1510147957.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:38.178Z,1510147958.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:38.577Z,1510147958.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:38.977Z,1510147958.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:39.377Z,1510147959.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:39.776Z,1510147959.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:40.182Z,1510147960.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:40.577Z,1510147960.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:40.983Z,1510147960.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:41.377Z,1510147961.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:41.777Z,1510147961.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:42.176Z,1510147962.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:42.577Z,1510147962.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:42.977Z,1510147962.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:43.376Z,1510147963.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:43.777Z,1510147963.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:44.177Z,1510147964.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:44.599Z,1510147964.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:44.981Z,1510147964.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:45.374Z,1510147965.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:45.793Z,1510147965.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:46.175Z,1510147966.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:46.249Z,1510147966.249 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T13:32:46.599Z,1510147966.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:46.980Z,1510147966.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:47.411Z,1510147967.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:47.778Z,1510147967.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:48.184Z,1510147968.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:48.584Z,1510147968.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:48.979Z,1510147968.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:49.385Z,1510147969.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:49.781Z,1510147969.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:50.183Z,1510147970.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:50.582Z,1510147970.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:50.979Z,1510147970.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:51.379Z,1510147971.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:51.779Z,1510147971.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:52.186Z,1510147972.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:52.584Z,1510147972.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:52.982Z,1510147972.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:53.379Z,1510147973.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:53.791Z,1510147973.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:54.186Z,1510147974.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:54.566Z,1510147974.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:54.990Z,1510147974.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:55.394Z,1510147975.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:55.801Z,1510147975.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:56.138Z,1510147976.138 [NAL9602](INFO): Powering up NAL9602
2017-11-08T13:32:56.194Z,1510147976.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:56.273Z,1510147976.273 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T13:32:56.273Z,1510147976.273 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T13:32:56.565Z,1510147976.565 [Rowe_600LCM](INFO): Initializing
2017-11-08T13:32:56.565Z,1510147976.565 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T13:32:56.565Z,1510147976.565 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T13:32:56.565Z,1510147976.565 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T13:32:56.565Z,1510147976.565 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T13:32:56.609Z,1510147976.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:56.705Z,1510147976.705 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:32:56.969Z,1510147976.969 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T13:32:57.014Z,1510147977.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:57.142Z,1510147977.142 [Rowe_600LCM](INFO): Powering down
2017-11-08T13:32:57.383Z,1510147977.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:57.777Z,1510147977.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:58.178Z,1510147978.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:58.581Z,1510147978.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:58.681Z,1510147978.681 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T13:32:58.681Z,1510147978.681 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T13:32:58.757Z,1510147978.757 [Rowe_600LCM](INFO): Initializing
2017-11-08T13:32:58.757Z,1510147978.757 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T13:32:58.757Z,1510147978.757 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T13:32:58.757Z,1510147978.757 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T13:32:58.757Z,1510147978.757 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T13:32:58.974Z,1510147978.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:59.049Z,1510147979.049 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:32:59.161Z,1510147979.161 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T13:32:59.244Z,1510147979.244 [Rowe_600LCM](INFO): Powering down
2017-11-08T13:32:59.382Z,1510147979.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:32:59.776Z,1510147979.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:00.174Z,1510147980.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:00.572Z,1510147980.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:00.649Z,1510147980.649 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T13:33:00.649Z,1510147980.649 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T13:33:00.861Z,1510147980.861 [Rowe_600LCM](INFO): Initializing
2017-11-08T13:33:00.861Z,1510147980.861 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T13:33:00.861Z,1510147980.861 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T13:33:00.861Z,1510147980.861 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T13:33:00.861Z,1510147980.861 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T13:33:00.977Z,1510147980.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:01.057Z,1510147981.057 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:33:01.265Z,1510147981.265 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T13:33:01.385Z,1510147981.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:01.456Z,1510147981.456 [Rowe_600LCM](INFO): Powering down
2017-11-08T13:33:01.777Z,1510147981.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:02.178Z,1510147982.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:02.577Z,1510147982.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:02.977Z,1510147982.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:03.057Z,1510147983.057 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T13:33:03.057Z,1510147983.057 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T13:33:03.073Z,1510147983.073 [Rowe_600LCM](INFO): Initializing
2017-11-08T13:33:03.073Z,1510147983.073 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T13:33:03.073Z,1510147983.073 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T13:33:03.073Z,1510147983.073 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T13:33:03.073Z,1510147983.073 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T13:33:03.383Z,1510147983.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:03.473Z,1510147983.473 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:33:03.477Z,1510147983.477 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T13:33:03.572Z,1510147983.572 [Rowe_600LCM](INFO): Powering down
2017-11-08T13:33:03.785Z,1510147983.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:04.177Z,1510147984.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:04.579Z,1510147984.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:04.977Z,1510147984.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:05.057Z,1510147985.057 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T13:33:05.057Z,1510147985.057 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T13:33:05.189Z,1510147985.189 [Rowe_600LCM](INFO): Initializing
2017-11-08T13:33:05.189Z,1510147985.189 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T13:33:05.189Z,1510147985.189 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T13:33:05.189Z,1510147985.189 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T13:33:05.189Z,1510147985.189 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T13:33:05.383Z,1510147985.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:05.465Z,1510147985.465 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:33:05.465Z,1510147985.465 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:33:05.593Z,1510147985.593 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T13:33:05.681Z,1510147985.681 [Rowe_600LCM](INFO): Powering down
2017-11-08T13:33:05.785Z,1510147985.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:06.177Z,1510147986.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:06.630Z,1510147986.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:06.991Z,1510147986.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:07.338Z,1510147987.338 [NAL9602](INFO): NAL9602 initialized
2017-11-08T13:33:07.392Z,1510147987.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:07.821Z,1510147987.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:08.192Z,1510147988.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:08.588Z,1510147988.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:09.019Z,1510147989.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:09.388Z,1510147989.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:09.810Z,1510147989.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:10.174Z,1510147990.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:10.617Z,1510147990.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:10.988Z,1510147990.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:11.946Z,1510147991.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:12.128Z,1510147992.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:12.523Z,1510147992.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:12.920Z,1510147992.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:13.321Z,1510147993.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:13.726Z,1510147993.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:14.096Z,1510147994.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:14.524Z,1510147994.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:14.919Z,1510147994.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:15.322Z,1510147995.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:15.984Z,1510147995.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:16.128Z,1510147996.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:16.526Z,1510147996.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:16.943Z,1510147996.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:17.328Z,1510147997.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:17.727Z,1510147997.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:18.152Z,1510147998.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:18.539Z,1510147998.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:18.931Z,1510147998.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:19.590Z,1510147999.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:19.742Z,1510147999.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:20.145Z,1510148000.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:20.544Z,1510148000.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:20.946Z,1510148000.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:21.337Z,1510148001.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:21.741Z,1510148001.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:22.141Z,1510148002.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:22.570Z,1510148002.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:22.938Z,1510148002.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:23.344Z,1510148003.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:25.217Z,1510148005.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:25.369Z,1510148005.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:25.716Z,1510148005.716 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T13:33:25.716Z,1510148005.716 [NAL9602] Data Fault, FailCount= 2
2017-11-08T13:33:25.716Z,1510148005.716 [NAL9602](ERROR): Data Fault
2017-11-08T13:33:25.750Z,1510148005.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:25.849Z,1510148005.849 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T13:33:26.114Z,1510148006.114 [NAL9602](INFO): Powering down
2017-11-08T13:33:26.152Z,1510148006.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:26.549Z,1510148006.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:26.953Z,1510148006.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:27.044Z,1510148007.044 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T13:33:27.045Z,1510148007.045 [NAL9602] No Fault, FailCount= 2
2017-11-08T13:33:27.351Z,1510148007.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:27.750Z,1510148007.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:28.172Z,1510148008.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:28.602Z,1510148008.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:28.964Z,1510148008.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:29.351Z,1510148009.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:29.749Z,1510148009.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:30.205Z,1510148010.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:30.550Z,1510148010.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:30.945Z,1510148010.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:31.383Z,1510148011.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:31.749Z,1510148011.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:32.181Z,1510148012.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:32.546Z,1510148012.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:32.948Z,1510148012.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:33.349Z,1510148013.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:33.747Z,1510148013.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:34.160Z,1510148014.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:34.561Z,1510148014.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:34.957Z,1510148014.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:35.368Z,1510148015.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:35.738Z,1510148015.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:36.142Z,1510148016.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:36.566Z,1510148016.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:36.967Z,1510148016.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:37.342Z,1510148017.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:37.744Z,1510148017.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:38.140Z,1510148018.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:38.542Z,1510148018.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:38.942Z,1510148018.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:39.344Z,1510148019.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:39.757Z,1510148019.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:40.142Z,1510148020.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:40.568Z,1510148020.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:40.945Z,1510148020.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:41.345Z,1510148021.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:41.746Z,1510148021.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:42.143Z,1510148022.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:42.544Z,1510148022.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:42.945Z,1510148022.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:43.347Z,1510148023.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:43.742Z,1510148023.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:44.144Z,1510148024.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:44.545Z,1510148024.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:44.946Z,1510148024.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:45.342Z,1510148025.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:45.745Z,1510148025.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:46.141Z,1510148026.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:46.541Z,1510148026.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:46.947Z,1510148026.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:47.345Z,1510148027.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:47.746Z,1510148027.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:48.168Z,1510148028.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:48.543Z,1510148028.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:48.951Z,1510148028.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:49.349Z,1510148029.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:49.747Z,1510148029.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:50.143Z,1510148030.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:50.550Z,1510148030.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:50.949Z,1510148030.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:51.391Z,1510148031.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:51.743Z,1510148031.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:52.176Z,1510148032.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:52.594Z,1510148032.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:52.951Z,1510148032.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:53.383Z,1510148033.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:53.747Z,1510148033.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:54.183Z,1510148034.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:54.551Z,1510148034.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:54.944Z,1510148034.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:55.348Z,1510148035.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:55.749Z,1510148035.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:56.118Z,1510148036.118 [NAL9602](INFO): Powering up NAL9602
2017-11-08T13:33:56.151Z,1510148036.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:56.546Z,1510148036.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:56.947Z,1510148036.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:57.348Z,1510148037.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:57.751Z,1510148037.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:58.146Z,1510148038.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:58.543Z,1510148038.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:58.949Z,1510148038.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:59.351Z,1510148039.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:33:59.741Z,1510148039.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:00.149Z,1510148040.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:00.549Z,1510148040.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:00.950Z,1510148040.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:01.346Z,1510148041.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:01.748Z,1510148041.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:02.149Z,1510148042.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:02.587Z,1510148042.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:02.946Z,1510148042.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:03.351Z,1510148043.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:03.775Z,1510148043.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:04.189Z,1510148044.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:04.581Z,1510148044.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:04.949Z,1510148044.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:05.349Z,1510148045.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:05.750Z,1510148045.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:06.156Z,1510148046.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:06.559Z,1510148046.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:06.963Z,1510148046.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:07.314Z,1510148047.314 [NAL9602](INFO): NAL9602 initialized
2017-11-08T13:34:07.383Z,1510148047.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:07.765Z,1510148047.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:08.167Z,1510148048.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:08.562Z,1510148048.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:08.972Z,1510148048.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:09.339Z,1510148049.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:09.742Z,1510148049.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:10.157Z,1510148050.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:10.581Z,1510148050.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:10.976Z,1510148050.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:11.652Z,1510148051.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:11.798Z,1510148051.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:12.228Z,1510148052.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:12.628Z,1510148052.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:13.032Z,1510148053.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:13.425Z,1510148053.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:13.804Z,1510148053.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:14.221Z,1510148054.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:14.687Z,1510148054.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:15.004Z,1510148055.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:15.433Z,1510148055.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:16.143Z,1510148056.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:16.273Z,1510148056.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:16.708Z,1510148056.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:17.088Z,1510148057.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:17.485Z,1510148057.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:17.888Z,1510148057.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:18.264Z,1510148058.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:18.695Z,1510148058.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:19.095Z,1510148059.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:19.803Z,1510148059.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:19.943Z,1510148059.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:20.347Z,1510148060.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:20.747Z,1510148060.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:21.141Z,1510148061.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:21.536Z,1510148061.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:21.935Z,1510148061.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:22.359Z,1510148062.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:22.737Z,1510148062.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:23.137Z,1510148063.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:23.544Z,1510148063.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:24.236Z,1510148064.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:24.395Z,1510148064.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:24.833Z,1510148064.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:25.193Z,1510148065.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:25.592Z,1510148065.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:25.989Z,1510148065.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:26.392Z,1510148066.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:26.787Z,1510148066.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:27.172Z,1510148067.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:27.604Z,1510148067.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:27.994Z,1510148067.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:28.670Z,1510148068.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:28.851Z,1510148068.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:29.245Z,1510148069.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:29.651Z,1510148069.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:30.049Z,1510148070.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:30.423Z,1510148070.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:30.819Z,1510148070.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:31.252Z,1510148071.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:31.652Z,1510148071.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:32.028Z,1510148072.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:32.450Z,1510148072.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:33.122Z,1510148073.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:33.294Z,1510148073.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:33.675Z,1510148073.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:34.075Z,1510148074.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:34.480Z,1510148074.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:34.871Z,1510148074.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:35.267Z,1510148075.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:35.689Z,1510148075.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:36.079Z,1510148076.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:36.817Z,1510148076.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:36.990Z,1510148076.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:37.364Z,1510148077.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:37.811Z,1510148077.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:38.160Z,1510148078.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:38.580Z,1510148078.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:38.957Z,1510148078.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:39.447Z,1510148079.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:39.777Z,1510148079.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:40.157Z,1510148080.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:40.562Z,1510148080.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:41.230Z,1510148081.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:41.403Z,1510148081.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:41.800Z,1510148081.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:42.203Z,1510148082.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:42.600Z,1510148082.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:42.987Z,1510148082.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:43.383Z,1510148083.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:43.786Z,1510148083.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:44.187Z,1510148084.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:44.614Z,1510148084.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:45.008Z,1510148085.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:45.679Z,1510148085.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:45.833Z,1510148085.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:46.261Z,1510148086.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:46.685Z,1510148086.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:47.061Z,1510148087.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:47.439Z,1510148087.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:47.838Z,1510148087.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:48.236Z,1510148088.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:48.672Z,1510148088.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:49.047Z,1510148089.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:49.473Z,1510148089.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:50.147Z,1510148090.147 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:50.148Z,1510148090.148 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2017-11-08T13:34:50.148Z,1510148090.148 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T13:34:50.150Z,1510148090.150 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:50.150Z,1510148090.150 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2017-11-08T13:34:50.150Z,1510148090.150 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T13:34:50.151Z,1510148090.151 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:50.151Z,1510148090.151 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-11-08T13:34:50.152Z,1510148090.152 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T13:34:50.264Z,1510148090.264 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T13:34:50.265Z,1510148090.265 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T13:34:50.265Z,1510148090.265 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T13:34:50.429Z,1510148090.429 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T13:34:50.429Z,1510148090.429 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2017-11-08T13:34:50.429Z,1510148090.429 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T13:34:50.429Z,1510148090.429 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2017-11-08T13:34:50.430Z,1510148090.430 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T13:34:50.430Z,1510148090.430 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-11-08T13:34:50.738Z,1510148090.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T13:34:50.738Z,1510148090.738 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:34:50.739Z,1510148090.739 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:34:50.739Z,1510148090.739 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T13:34:50.739Z,1510148090.739 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:34:50.740Z,1510148090.740 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:34:50.740Z,1510148090.740 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T13:34:50.741Z,1510148090.741 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:34:50.741Z,1510148090.741 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:34:51.138Z,1510148091.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2017-11-08T13:34:51.139Z,1510148091.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:51.533Z,1510148091.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2017-11-08T13:34:51.534Z,1510148091.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:51.914Z,1510148091.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2017-11-08T13:34:51.915Z,1510148091.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:52.347Z,1510148092.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2017-11-08T13:34:52.348Z,1510148092.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:52.721Z,1510148092.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2017-11-08T13:34:52.722Z,1510148092.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:53.400Z,1510148093.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2017-11-08T13:34:53.401Z,1510148093.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:53.547Z,1510148093.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2017-11-08T13:34:53.548Z,1510148093.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:53.951Z,1510148093.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2017-11-08T13:34:53.952Z,1510148093.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:54.355Z,1510148094.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2017-11-08T13:34:54.356Z,1510148094.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:54.755Z,1510148094.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2017-11-08T13:34:54.756Z,1510148094.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:55.144Z,1510148095.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2017-11-08T13:34:55.145Z,1510148095.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:55.523Z,1510148095.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2017-11-08T13:34:55.524Z,1510148095.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:55.944Z,1510148095.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2017-11-08T13:34:55.945Z,1510148095.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:56.363Z,1510148096.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-11-08T13:34:56.364Z,1510148096.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:56.727Z,1510148096.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-08T13:34:56.728Z,1510148096.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:57.155Z,1510148097.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2017-11-08T13:34:57.156Z,1510148097.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:57.825Z,1510148097.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T13:34:57.826Z,1510148097.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:58.002Z,1510148098.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2017-11-08T13:34:58.003Z,1510148098.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:58.393Z,1510148098.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2017-11-08T13:34:58.394Z,1510148098.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:58.854Z,1510148098.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2017-11-08T13:34:58.855Z,1510148098.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:59.182Z,1510148099.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2017-11-08T13:34:59.183Z,1510148099.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:34:59.573Z,1510148099.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2017-11-08T13:34:59.574Z,1510148099.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:00.006Z,1510148100.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2017-11-08T13:35:00.007Z,1510148100.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:00.389Z,1510148100.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2017-11-08T13:35:00.390Z,1510148100.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:00.815Z,1510148100.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2017-11-08T13:35:00.816Z,1510148100.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:01.484Z,1510148101.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T13:35:01.485Z,1510148101.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:01.659Z,1510148101.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2017-11-08T13:35:01.660Z,1510148101.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:02.063Z,1510148102.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2017-11-08T13:35:02.065Z,1510148102.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:02.463Z,1510148102.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2017-11-08T13:35:02.463Z,1510148102.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:02.853Z,1510148102.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2017-11-08T13:35:02.854Z,1510148102.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:03.238Z,1510148103.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2017-11-08T13:35:03.239Z,1510148103.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:03.637Z,1510148103.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2017-11-08T13:35:03.638Z,1510148103.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:04.038Z,1510148104.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2017-11-08T13:35:04.039Z,1510148104.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:04.471Z,1510148104.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2017-11-08T13:35:04.472Z,1510148104.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:04.837Z,1510148104.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2017-11-08T13:35:04.838Z,1510148104.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:05.245Z,1510148105.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2017-11-08T13:35:05.246Z,1510148105.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:05.940Z,1510148105.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-08T13:35:05.941Z,1510148105.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:06.126Z,1510148106.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T13:35:06.127Z,1510148106.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:06.521Z,1510148106.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T13:35:06.522Z,1510148106.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:06.919Z,1510148106.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T13:35:06.920Z,1510148106.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:07.328Z,1510148107.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T13:35:07.329Z,1510148107.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:07.694Z,1510148107.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2017-11-08T13:35:07.695Z,1510148107.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:08.117Z,1510148108.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T13:35:08.118Z,1510148108.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:08.525Z,1510148108.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T13:35:08.526Z,1510148108.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:08.965Z,1510148108.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T13:35:08.966Z,1510148108.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:09.587Z,1510148109.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-08T13:35:09.588Z,1510148109.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:09.734Z,1510148109.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T13:35:09.735Z,1510148109.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:10.134Z,1510148110.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-08T13:35:10.135Z,1510148110.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:10.551Z,1510148110.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:10.922Z,1510148110.922 [PNI_TCM](ERROR): CRC does not match. Expected:0x43647 got:0x17048
2017-11-08T13:35:10.951Z,1510148110.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:11.325Z,1510148111.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:11.704Z,1510148111.704 [PNI_TCM](ERROR): CRC does not match. Expected:0x64861 got:0x7361
2017-11-08T13:35:11.731Z,1510148111.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:12.130Z,1510148112.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:12.551Z,1510148112.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:12.931Z,1510148112.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:13.320Z,1510148113.320 [PNI_TCM](ERROR): CRC does not match. Expected:0x54515 got:0x1052
2017-11-08T13:35:13.351Z,1510148113.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:14.001Z,1510148114.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:14.164Z,1510148114.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:14.577Z,1510148114.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:14.976Z,1510148114.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:15.374Z,1510148115.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:15.752Z,1510148115.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:16.152Z,1510148116.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:16.581Z,1510148116.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:16.970Z,1510148116.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:17.643Z,1510148117.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:17.784Z,1510148117.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:18.193Z,1510148118.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:18.592Z,1510148118.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:18.992Z,1510148118.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:19.380Z,1510148119.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:19.788Z,1510148119.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:20.191Z,1510148120.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:20.600Z,1510148120.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:21.023Z,1510148121.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:21.394Z,1510148121.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:22.100Z,1510148122.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:22.241Z,1510148122.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:22.695Z,1510148122.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:23.055Z,1510148123.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:23.457Z,1510148123.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:23.852Z,1510148123.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:24.254Z,1510148124.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:24.664Z,1510148124.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:25.056Z,1510148125.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:25.720Z,1510148125.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:25.858Z,1510148125.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:26.267Z,1510148126.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:26.662Z,1510148126.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:27.068Z,1510148127.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:27.455Z,1510148127.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:27.859Z,1510148127.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:28.256Z,1510148128.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:28.679Z,1510148128.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:29.057Z,1510148129.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:29.469Z,1510148129.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:30.154Z,1510148130.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:30.315Z,1510148130.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:30.754Z,1510148130.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:31.108Z,1510148131.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:31.505Z,1510148131.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:31.904Z,1510148131.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:32.305Z,1510148132.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:32.715Z,1510148132.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:33.115Z,1510148133.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:33.803Z,1510148133.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:33.959Z,1510148133.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:34.357Z,1510148134.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:34.763Z,1510148134.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:35.150Z,1510148135.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:35.534Z,1510148135.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:35.963Z,1510148135.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:36.364Z,1510148136.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:36.735Z,1510148136.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:37.139Z,1510148137.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:37.563Z,1510148137.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:38.229Z,1510148138.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:38.391Z,1510148138.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:38.784Z,1510148138.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:39.183Z,1510148139.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:39.588Z,1510148139.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:39.976Z,1510148139.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:40.381Z,1510148140.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:40.770Z,1510148140.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:41.176Z,1510148141.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:41.589Z,1510148141.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:41.985Z,1510148141.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:42.754Z,1510148142.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:42.923Z,1510148142.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:43.324Z,1510148143.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:43.740Z,1510148143.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:44.136Z,1510148144.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:44.540Z,1510148144.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:44.910Z,1510148144.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:45.330Z,1510148145.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:45.731Z,1510148145.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:46.103Z,1510148146.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:46.509Z,1510148146.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:47.198Z,1510148147.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:47.343Z,1510148147.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:47.743Z,1510148147.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:48.148Z,1510148148.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:48.534Z,1510148148.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:48.932Z,1510148148.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:49.352Z,1510148149.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:49.737Z,1510148149.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:50.405Z,1510148150.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:50.557Z,1510148150.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:50.958Z,1510148150.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:51.383Z,1510148151.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:51.758Z,1510148151.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:52.150Z,1510148152.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:52.576Z,1510148152.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:52.956Z,1510148152.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:53.377Z,1510148153.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:53.752Z,1510148153.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:54.239Z,1510148154.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:55.129Z,1510148155.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:55.290Z,1510148155.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:55.691Z,1510148155.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:56.081Z,1510148156.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:56.482Z,1510148156.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:56.860Z,1510148156.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:57.279Z,1510148157.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:57.693Z,1510148157.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:58.088Z,1510148158.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:58.753Z,1510148158.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:58.930Z,1510148158.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:59.332Z,1510148159.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:35:59.732Z,1510148159.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:00.139Z,1510148160.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:00.534Z,1510148160.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:00.906Z,1510148160.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:01.310Z,1510148161.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:01.744Z,1510148161.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:02.130Z,1510148162.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:02.540Z,1510148162.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:03.208Z,1510148163.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:03.347Z,1510148163.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:03.746Z,1510148163.746 [PNI_TCM](ERROR): CRC does not match. Expected:0x6739 got:0x6336
2017-11-08T13:36:03.768Z,1510148163.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:04.156Z,1510148164.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:04.619Z,1510148164.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:04.952Z,1510148164.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:05.404Z,1510148165.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:05.756Z,1510148165.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:06.461Z,1510148166.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:06.579Z,1510148166.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:07.004Z,1510148167.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:07.407Z,1510148167.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:07.802Z,1510148167.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:08.184Z,1510148168.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:08.583Z,1510148168.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:08.983Z,1510148168.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:09.412Z,1510148169.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:09.783Z,1510148169.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:10.209Z,1510148170.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:10.870Z,1510148170.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:10.985Z,1510148170.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:11.413Z,1510148171.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:11.812Z,1510148171.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:12.214Z,1510148172.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:12.592Z,1510148172.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:12.988Z,1510148172.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:13.421Z,1510148173.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:13.816Z,1510148173.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:14.513Z,1510148174.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:14.653Z,1510148174.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:15.076Z,1510148175.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:15.472Z,1510148175.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:15.880Z,1510148175.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:16.269Z,1510148176.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:16.668Z,1510148176.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:17.068Z,1510148177.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:17.484Z,1510148177.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:17.846Z,1510148177.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:18.274Z,1510148178.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:18.970Z,1510148178.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:19.131Z,1510148179.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:19.530Z,1510148179.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:19.926Z,1510148179.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:20.326Z,1510148180.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:20.727Z,1510148180.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:21.104Z,1510148181.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:21.534Z,1510148181.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:21.935Z,1510148181.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:22.598Z,1510148182.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:22.737Z,1510148182.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:23.136Z,1510148183.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:23.536Z,1510148183.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:23.932Z,1510148183.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:24.328Z,1510148184.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:24.728Z,1510148184.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:25.129Z,1510148185.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:25.551Z,1510148185.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:25.935Z,1510148185.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:26.336Z,1510148186.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:27.067Z,1510148187.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:27.227Z,1510148187.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:27.651Z,1510148187.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:28.034Z,1510148188.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:28.447Z,1510148188.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:28.803Z,1510148188.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:29.282Z,1510148189.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:29.625Z,1510148189.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:30.060Z,1510148190.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:30.699Z,1510148190.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:30.850Z,1510148190.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:31.241Z,1510148191.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:31.640Z,1510148191.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:32.044Z,1510148192.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:32.440Z,1510148192.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:32.844Z,1510148192.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:33.243Z,1510148193.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:33.655Z,1510148193.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:34.042Z,1510148194.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:34.447Z,1510148194.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:35.117Z,1510148195.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:35.295Z,1510148195.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:35.693Z,1510148195.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:36.101Z,1510148196.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:36.520Z,1510148196.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:36.883Z,1510148196.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:37.267Z,1510148197.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:37.709Z,1510148197.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:38.100Z,1510148198.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:38.761Z,1510148198.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:38.907Z,1510148198.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:39.313Z,1510148199.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:39.703Z,1510148199.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:40.103Z,1510148200.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:40.492Z,1510148200.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:40.896Z,1510148200.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:41.298Z,1510148201.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:41.715Z,1510148201.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:42.078Z,1510148202.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:42.512Z,1510148202.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:43.182Z,1510148203.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:43.351Z,1510148203.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:43.755Z,1510148203.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:44.150Z,1510148204.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:44.549Z,1510148204.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:44.951Z,1510148204.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:45.349Z,1510148205.349 [PNI_TCM](ERROR): CRC does not match. Expected:0x43004 got:0x7361
2017-11-08T13:36:45.376Z,1510148205.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:45.751Z,1510148205.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:46.425Z,1510148206.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:46.606Z,1510148206.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:47.002Z,1510148207.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:47.404Z,1510148207.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:47.806Z,1510148207.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:48.220Z,1510148208.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:48.628Z,1510148208.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:48.987Z,1510148208.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:49.462Z,1510148209.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:49.786Z,1510148209.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:50.227Z,1510148210.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:50.875Z,1510148210.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:50.991Z,1510148210.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:51.417Z,1510148211.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:51.816Z,1510148211.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:52.222Z,1510148212.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:52.616Z,1510148212.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:53.017Z,1510148213.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:53.424Z,1510148213.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:53.824Z,1510148213.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:54.516Z,1510148214.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:54.673Z,1510148214.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:55.083Z,1510148215.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:55.483Z,1510148215.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:55.880Z,1510148215.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:56.270Z,1510148216.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:56.669Z,1510148216.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:57.072Z,1510148217.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:57.491Z,1510148217.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:57.875Z,1510148217.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:58.323Z,1510148218.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:58.966Z,1510148218.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:59.123Z,1510148219.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:59.527Z,1510148219.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:36:59.924Z,1510148219.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:00.316Z,1510148220.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:00.719Z,1510148220.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:01.116Z,1510148221.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:01.527Z,1510148221.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:01.927Z,1510148221.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:02.585Z,1510148222.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:02.739Z,1510148222.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:03.134Z,1510148223.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:03.535Z,1510148223.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:03.932Z,1510148223.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:04.326Z,1510148224.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:04.723Z,1510148224.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:05.128Z,1510148225.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:05.566Z,1510148225.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:05.926Z,1510148225.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:06.334Z,1510148226.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:07.021Z,1510148227.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:07.178Z,1510148227.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:07.569Z,1510148227.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:07.969Z,1510148227.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:08.370Z,1510148228.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:08.769Z,1510148228.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:09.165Z,1510148229.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:09.584Z,1510148229.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:09.999Z,1510148229.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:10.695Z,1510148230.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:10.863Z,1510148230.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:11.271Z,1510148231.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:11.684Z,1510148231.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:12.050Z,1510148232.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:12.479Z,1510148232.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:12.841Z,1510148232.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:13.243Z,1510148233.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:13.680Z,1510148233.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:14.040Z,1510148234.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:14.449Z,1510148234.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:15.135Z,1510148235.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:15.281Z,1510148235.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:15.687Z,1510148235.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:16.076Z,1510148236.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:16.477Z,1510148236.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:16.875Z,1510148236.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:17.259Z,1510148237.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:17.688Z,1510148237.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:18.089Z,1510148238.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:18.749Z,1510148238.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:18.891Z,1510148238.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:19.292Z,1510148239.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:19.694Z,1510148239.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:20.093Z,1510148240.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:20.526Z,1510148240.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:20.882Z,1510148240.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:21.284Z,1510148241.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:21.703Z,1510148241.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:22.083Z,1510148242.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:22.489Z,1510148242.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:23.175Z,1510148243.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:23.340Z,1510148243.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:23.739Z,1510148243.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:24.134Z,1510148244.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:24.531Z,1510148244.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:24.929Z,1510148244.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:25.352Z,1510148245.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:25.731Z,1510148245.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:26.406Z,1510148246.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:26.582Z,1510148246.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:26.980Z,1510148246.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:27.381Z,1510148247.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:27.782Z,1510148247.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:28.154Z,1510148248.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:28.559Z,1510148248.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:28.956Z,1510148248.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:29.390Z,1510148249.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:29.753Z,1510148249.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:30.184Z,1510148250.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:30.847Z,1510148250.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:30.982Z,1510148250.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:31.397Z,1510148251.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:31.796Z,1510148251.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:32.197Z,1510148252.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:32.646Z,1510148252.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:32.993Z,1510148252.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:33.444Z,1510148253.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:33.804Z,1510148253.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:34.492Z,1510148254.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:34.622Z,1510148254.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:35.049Z,1510148255.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:35.448Z,1510148255.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:35.853Z,1510148255.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:36.251Z,1510148256.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:36.627Z,1510148256.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:37.041Z,1510148257.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:37.459Z,1510148257.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:37.827Z,1510148257.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:38.259Z,1510148258.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:38.927Z,1510148258.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:39.099Z,1510148259.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:39.499Z,1510148259.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:39.903Z,1510148259.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:40.280Z,1510148260.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:40.674Z,1510148260.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:41.076Z,1510148261.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:41.499Z,1510148261.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:41.900Z,1510148261.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:42.596Z,1510148262.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:42.744Z,1510148262.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:43.151Z,1510148263.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:43.549Z,1510148263.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:43.929Z,1510148263.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:44.322Z,1510148264.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:44.728Z,1510148264.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:45.122Z,1510148265.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:45.551Z,1510148265.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:45.923Z,1510148265.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:46.346Z,1510148266.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:47.016Z,1510148267.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:47.165Z,1510148267.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:47.558Z,1510148267.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:47.961Z,1510148267.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:48.358Z,1510148268.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:48.756Z,1510148268.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:49.140Z,1510148269.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:49.569Z,1510148269.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:49.968Z,1510148269.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:50.626Z,1510148270.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:50.767Z,1510148270.767 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:50.768Z,1510148270.768 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2017-11-08T13:37:50.768Z,1510148270.768 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T13:37:50.770Z,1510148270.770 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:50.770Z,1510148270.770 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2017-11-08T13:37:50.770Z,1510148270.770 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T13:37:50.771Z,1510148270.771 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:50.771Z,1510148270.771 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-11-08T13:37:50.771Z,1510148270.771 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T13:37:50.853Z,1510148270.853 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T13:37:50.853Z,1510148270.853 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T13:37:50.853Z,1510148270.853 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T13:37:51.249Z,1510148271.249 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T13:37:51.249Z,1510148271.249 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2017-11-08T13:37:51.249Z,1510148271.249 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T13:37:51.249Z,1510148271.249 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2017-11-08T13:37:51.250Z,1510148271.250 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T13:37:51.250Z,1510148271.250 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-11-08T13:37:51.573Z,1510148271.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T13:37:51.574Z,1510148271.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:37:51.574Z,1510148271.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:37:51.575Z,1510148271.575 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T13:37:51.575Z,1510148271.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:37:51.575Z,1510148271.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:37:51.576Z,1510148271.576 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T13:37:51.576Z,1510148271.576 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:37:51.576Z,1510148271.576 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:37:51.970Z,1510148271.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T13:37:51.971Z,1510148271.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:52.355Z,1510148272.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T13:37:52.356Z,1510148272.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:52.749Z,1510148272.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T13:37:52.750Z,1510148272.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:53.155Z,1510148273.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T13:37:53.156Z,1510148273.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:53.584Z,1510148273.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T13:37:53.585Z,1510148273.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:53.949Z,1510148273.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T13:37:53.950Z,1510148273.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:54.377Z,1510148274.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T13:37:54.378Z,1510148274.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:55.064Z,1510148275.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2017-11-08T13:37:55.097Z,1510148275.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:55.245Z,1510148275.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-08T13:37:55.246Z,1510148275.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:55.651Z,1510148275.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-08T13:37:55.652Z,1510148275.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:56.050Z,1510148276.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-08T13:37:56.051Z,1510148276.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:56.448Z,1510148276.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-08T13:37:56.449Z,1510148276.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:56.835Z,1510148276.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-08T13:37:56.836Z,1510148276.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:57.244Z,1510148277.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-08T13:37:57.245Z,1510148277.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:57.647Z,1510148277.647 [BPC1](ERROR): Failed to receive battery data
2017-11-08T13:37:57.647Z,1510148277.647 [BPC1] Communications Fault, FailCount= 1
2017-11-08T13:37:57.647Z,1510148277.647 [BPC1](ERROR): Communications Fault
2017-11-08T13:37:57.656Z,1510148277.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T13:37:57.657Z,1510148277.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:57.729Z,1510148277.729 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T13:37:58.058Z,1510148278.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-08T13:37:58.059Z,1510148278.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:58.738Z,1510148278.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T13:37:58.739Z,1510148278.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:58.890Z,1510148278.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T13:37:58.891Z,1510148278.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:58.969Z,1510148278.969 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T13:37:58.969Z,1510148278.969 [BPC1] No Fault, FailCount= 1
2017-11-08T13:37:59.351Z,1510148279.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2017-11-08T13:37:59.352Z,1510148279.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:37:59.701Z,1510148279.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T13:37:59.702Z,1510148279.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:00.093Z,1510148280.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T13:38:00.093Z,1510148280.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:00.471Z,1510148280.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T13:38:00.472Z,1510148280.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:00.871Z,1510148280.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T13:38:00.872Z,1510148280.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:01.276Z,1510148281.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T13:38:01.277Z,1510148281.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:01.703Z,1510148281.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T13:38:01.704Z,1510148281.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:02.074Z,1510148282.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T13:38:02.074Z,1510148282.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:02.501Z,1510148282.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T13:38:02.503Z,1510148282.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:03.203Z,1510148283.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T13:38:03.204Z,1510148283.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:03.358Z,1510148283.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2017-11-08T13:38:03.359Z,1510148283.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:03.760Z,1510148283.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2017-11-08T13:38:03.761Z,1510148283.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:04.159Z,1510148284.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2017-11-08T13:38:04.161Z,1510148284.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:04.556Z,1510148284.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2017-11-08T13:38:04.557Z,1510148284.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:04.955Z,1510148284.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2017-11-08T13:38:04.956Z,1510148284.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:05.375Z,1510148285.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2017-11-08T13:38:05.376Z,1510148285.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:05.760Z,1510148285.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2017-11-08T13:38:05.761Z,1510148285.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:06.433Z,1510148286.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T13:38:06.434Z,1510148286.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:06.582Z,1510148286.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-08T13:38:06.583Z,1510148286.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:07.006Z,1510148287.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-08T13:38:07.007Z,1510148287.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:07.432Z,1510148287.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2017-11-08T13:38:07.433Z,1510148287.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:07.806Z,1510148287.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-11-08T13:38:07.807Z,1510148287.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:08.187Z,1510148288.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-08T13:38:08.188Z,1510148288.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:08.595Z,1510148288.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-08T13:38:08.596Z,1510148288.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:08.995Z,1510148288.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-08T13:38:08.996Z,1510148288.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:09.423Z,1510148289.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2017-11-08T13:38:09.424Z,1510148289.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:09.790Z,1510148289.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-08T13:38:09.791Z,1510148289.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:10.216Z,1510148290.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-08T13:38:10.217Z,1510148290.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:10.878Z,1510148290.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:11.005Z,1510148291.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:11.425Z,1510148291.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:11.824Z,1510148291.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:12.225Z,1510148292.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:12.623Z,1510148292.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:13.020Z,1510148293.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:13.433Z,1510148293.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:13.828Z,1510148293.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:14.485Z,1510148294.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:14.598Z,1510148294.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:15.032Z,1510148295.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:15.431Z,1510148295.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:15.832Z,1510148295.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:16.204Z,1510148296.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:16.603Z,1510148296.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:17.005Z,1510148297.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:17.433Z,1510148297.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:17.804Z,1510148297.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:18.252Z,1510148298.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:18.936Z,1510148298.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:19.090Z,1510148299.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:19.521Z,1510148299.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:19.885Z,1510148299.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:20.324Z,1510148300.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:20.685Z,1510148300.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:21.080Z,1510148301.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:21.489Z,1510148301.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:21.891Z,1510148301.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:22.551Z,1510148302.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:22.694Z,1510148302.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:23.092Z,1510148303.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:23.490Z,1510148303.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:23.885Z,1510148303.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:24.271Z,1510148304.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:24.695Z,1510148304.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:25.071Z,1510148305.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:25.503Z,1510148305.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:25.876Z,1510148305.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:26.301Z,1510148306.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:26.964Z,1510148306.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:27.111Z,1510148307.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:27.503Z,1510148307.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:27.905Z,1510148307.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:28.348Z,1510148308.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:28.707Z,1510148308.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:29.107Z,1510148309.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:29.516Z,1510148309.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:29.911Z,1510148309.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:30.567Z,1510148310.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:30.723Z,1510148310.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:31.115Z,1510148311.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:31.511Z,1510148311.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:31.916Z,1510148311.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:32.303Z,1510148312.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:32.705Z,1510148312.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:33.103Z,1510148313.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:33.527Z,1510148313.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:33.904Z,1510148313.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:34.316Z,1510148314.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:34.999Z,1510148314.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:35.171Z,1510148315.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:35.567Z,1510148315.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:35.971Z,1510148315.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:36.375Z,1510148316.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:36.755Z,1510148316.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:37.131Z,1510148317.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:37.156Z,1510148317.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:37.557Z,1510148317.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:37.574Z,1510148317.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:37.951Z,1510148317.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:37.968Z,1510148317.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:38.622Z,1510148318.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:38.652Z,1510148318.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:38.775Z,1510148318.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:38.809Z,1510148318.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:39.196Z,1510148319.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:39.259Z,1510148319.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:39.596Z,1510148319.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:39.619Z,1510148319.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:39.997Z,1510148319.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:40.040Z,1510148320.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:40.375Z,1510148320.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:40.416Z,1510148320.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:40.775Z,1510148320.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:40.791Z,1510148320.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:41.176Z,1510148321.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:41.224Z,1510148321.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:41.608Z,1510148321.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:41.624Z,1510148321.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:41.971Z,1510148321.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:42.021Z,1510148322.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:42.389Z,1510148322.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:42.418Z,1510148322.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:43.070Z,1510148323.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:43.086Z,1510148323.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:43.212Z,1510148323.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:43.243Z,1510148323.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:43.621Z,1510148323.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:43.644Z,1510148323.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:44.022Z,1510148324.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:44.038Z,1510148324.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:44.418Z,1510148324.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:44.434Z,1510148324.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:44.814Z,1510148324.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:44.830Z,1510148324.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:45.213Z,1510148325.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:45.233Z,1510148325.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:45.629Z,1510148325.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:45.654Z,1510148325.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:46.025Z,1510148326.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:46.041Z,1510148326.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:46.708Z,1510148326.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:46.724Z,1510148326.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:46.834Z,1510148326.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:46.867Z,1510148326.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:47.253Z,1510148327.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:47.269Z,1510148327.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:47.652Z,1510148327.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:47.668Z,1510148327.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:48.037Z,1510148328.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:48.064Z,1510148328.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:48.431Z,1510148328.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:48.468Z,1510148328.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:48.837Z,1510148328.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:48.869Z,1510148328.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:49.228Z,1510148329.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:49.438Z,1510148329.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:49.654Z,1510148329.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:49.696Z,1510148329.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:50.035Z,1510148330.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:50.087Z,1510148330.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:50.446Z,1510148330.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:50.463Z,1510148330.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:51.114Z,1510148331.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:51.142Z,1510148331.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:51.259Z,1510148331.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:51.295Z,1510148331.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:51.670Z,1510148331.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:51.702Z,1510148331.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:52.069Z,1510148332.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:52.094Z,1510148332.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:52.480Z,1510148332.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:52.501Z,1510148332.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:52.859Z,1510148332.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:52.894Z,1510148332.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:53.260Z,1510148333.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:53.296Z,1510148333.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:53.691Z,1510148333.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:53.712Z,1510148333.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:54.080Z,1510148334.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:54.101Z,1510148334.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:54.814Z,1510148334.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:54.842Z,1510148334.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:54.959Z,1510148334.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:54.992Z,1510148334.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:55.374Z,1510148335.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:55.404Z,1510148335.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:55.774Z,1510148335.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:55.799Z,1510148335.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:56.174Z,1510148336.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:56.211Z,1510148336.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:56.559Z,1510148336.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:56.576Z,1510148336.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:56.960Z,1510148336.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:56.976Z,1510148336.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:57.390Z,1510148337.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:57.420Z,1510148337.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:57.759Z,1510148337.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:57.776Z,1510148337.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:58.170Z,1510148338.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:58.201Z,1510148338.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:58.851Z,1510148338.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:58.875Z,1510148338.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:59.011Z,1510148339.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:59.028Z,1510148339.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:59.414Z,1510148339.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:59.430Z,1510148339.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:38:59.818Z,1510148339.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:38:59.850Z,1510148339.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:00.218Z,1510148340.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:00.234Z,1510148340.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:00.606Z,1510148340.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:00.668Z,1510148340.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:01.010Z,1510148341.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:01.026Z,1510148341.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:01.426Z,1510148341.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:01.454Z,1510148341.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:01.817Z,1510148341.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:01.833Z,1510148341.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:02.496Z,1510148342.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:02.563Z,1510148342.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:02.683Z,1510148342.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:02.720Z,1510148342.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:03.101Z,1510148343.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:03.140Z,1510148343.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:03.502Z,1510148343.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:03.519Z,1510148343.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:03.900Z,1510148343.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:03.964Z,1510148343.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:04.279Z,1510148344.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:04.314Z,1510148344.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:04.683Z,1510148344.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:04.713Z,1510148344.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:05.084Z,1510148345.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:05.118Z,1510148345.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:05.512Z,1510148345.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:05.527Z,1510148345.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:05.883Z,1510148345.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:05.914Z,1510148345.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:06.303Z,1510148346.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:06.323Z,1510148346.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:06.970Z,1510148346.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:06.986Z,1510148346.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:07.118Z,1510148347.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:07.161Z,1510148347.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:07.526Z,1510148347.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:07.542Z,1510148347.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:07.925Z,1510148347.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:07.941Z,1510148347.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:08.326Z,1510148348.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:08.342Z,1510148348.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:08.717Z,1510148348.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:08.733Z,1510148348.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:09.114Z,1510148349.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:09.135Z,1510148349.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:09.534Z,1510148349.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:09.562Z,1510148349.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:09.925Z,1510148349.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:09.965Z,1510148349.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:10.601Z,1510148350.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:10.617Z,1510148350.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:10.731Z,1510148350.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:10.767Z,1510148350.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:11.142Z,1510148351.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:11.172Z,1510148351.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:11.541Z,1510148351.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:11.566Z,1510148351.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:11.942Z,1510148351.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:12.014Z,1510148352.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:12.331Z,1510148352.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:12.365Z,1510148352.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:12.727Z,1510148352.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:12.768Z,1510148352.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:13.132Z,1510148353.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:13.166Z,1510148353.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:13.560Z,1510148353.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:13.576Z,1510148353.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:13.927Z,1510148353.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:13.968Z,1510148353.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:14.352Z,1510148354.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:14.369Z,1510148354.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:15.022Z,1510148355.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:15.038Z,1510148355.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:15.173Z,1510148355.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:15.219Z,1510148355.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:15.594Z,1510148355.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:15.623Z,1510148355.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:16.004Z,1510148356.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:16.020Z,1510148356.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:16.389Z,1510148356.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:16.427Z,1510148356.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:16.779Z,1510148356.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:16.819Z,1510148356.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:17.180Z,1510148357.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:17.195Z,1510148357.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:17.609Z,1510148357.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:17.625Z,1510148357.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:17.993Z,1510148357.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:18.021Z,1510148358.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:18.670Z,1510148358.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:18.686Z,1510148358.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:18.785Z,1510148358.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:18.827Z,1510148358.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:19.212Z,1510148359.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:19.229Z,1510148359.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:19.611Z,1510148359.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:19.627Z,1510148359.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:20.009Z,1510148360.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:20.025Z,1510148360.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:20.391Z,1510148360.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:20.426Z,1510148360.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:20.791Z,1510148360.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:20.823Z,1510148360.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:21.188Z,1510148361.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:21.225Z,1510148361.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:21.624Z,1510148361.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:21.640Z,1510148361.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:21.991Z,1510148361.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:22.023Z,1510148362.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:22.405Z,1510148362.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:22.436Z,1510148362.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:23.090Z,1510148363.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:23.140Z,1510148363.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:23.259Z,1510148363.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:23.308Z,1510148363.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:23.683Z,1510148363.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:23.703Z,1510148363.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:24.079Z,1510148364.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:24.158Z,1510148364.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:24.476Z,1510148364.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:24.497Z,1510148364.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:24.860Z,1510148364.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:24.890Z,1510148364.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:25.260Z,1510148365.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:25.305Z,1510148365.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:25.682Z,1510148365.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:25.700Z,1510148365.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:26.080Z,1510148366.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:26.132Z,1510148366.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:26.753Z,1510148366.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:26.789Z,1510148366.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:26.898Z,1510148366.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:26.947Z,1510148366.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:27.322Z,1510148367.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:27.344Z,1510148367.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:27.724Z,1510148367.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:27.740Z,1510148367.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:28.110Z,1510148368.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:28.137Z,1510148368.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:28.503Z,1510148368.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:28.513Z,1510148368.513 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-11-08T13:39:28.538Z,1510148368.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:28.906Z,1510148368.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:28.913Z,1510148368.913 [PNI_TCM](ERROR): CRC does not match. Expected:0x36046 got:0x13853
2017-11-08T13:39:28.943Z,1510148368.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:29.335Z,1510148369.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:29.351Z,1510148369.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:29.703Z,1510148369.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:29.746Z,1510148369.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:30.103Z,1510148370.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:30.138Z,1510148370.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:30.525Z,1510148370.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:30.541Z,1510148370.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:31.306Z,1510148371.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:31.337Z,1510148371.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:31.449Z,1510148371.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:31.465Z,1510148371.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:31.866Z,1510148371.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:31.892Z,1510148371.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:32.269Z,1510148372.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:32.294Z,1510148372.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:32.666Z,1510148372.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:32.692Z,1510148372.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:33.055Z,1510148373.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:33.091Z,1510148373.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:33.459Z,1510148373.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:33.475Z,1510148373.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:33.856Z,1510148373.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:33.872Z,1510148373.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:34.257Z,1510148374.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:34.311Z,1510148374.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:34.691Z,1510148374.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:34.706Z,1510148374.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:35.066Z,1510148375.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:35.098Z,1510148375.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:35.746Z,1510148375.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:35.767Z,1510148375.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:35.911Z,1510148375.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:35.955Z,1510148375.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:36.326Z,1510148376.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:36.356Z,1510148376.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:36.721Z,1510148376.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:36.748Z,1510148376.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:37.126Z,1510148377.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:37.159Z,1510148377.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:37.511Z,1510148377.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:37.528Z,1510148377.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:37.912Z,1510148377.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:37.955Z,1510148377.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:38.341Z,1510148378.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:38.357Z,1510148378.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:38.715Z,1510148378.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:38.752Z,1510148378.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:39.111Z,1510148379.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:39.127Z,1510148379.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:39.528Z,1510148379.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:39.559Z,1510148379.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:40.218Z,1510148380.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:40.257Z,1510148380.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:40.371Z,1510148380.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:40.407Z,1510148380.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:40.793Z,1510148380.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:40.809Z,1510148380.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:41.192Z,1510148381.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:41.209Z,1510148381.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:41.581Z,1510148381.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:41.612Z,1510148381.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:41.971Z,1510148381.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:42.009Z,1510148382.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:42.371Z,1510148382.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:42.404Z,1510148382.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:42.771Z,1510148382.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:42.792Z,1510148382.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:43.172Z,1510148383.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:43.200Z,1510148383.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:43.598Z,1510148383.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:43.614Z,1510148383.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:43.987Z,1510148383.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:44.008Z,1510148384.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:44.662Z,1510148384.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:44.687Z,1510148384.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:44.797Z,1510148384.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:44.847Z,1510148384.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:45.222Z,1510148385.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:45.284Z,1510148385.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:45.613Z,1510148385.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:45.638Z,1510148385.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:46.022Z,1510148386.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:46.043Z,1510148386.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:46.403Z,1510148386.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:46.464Z,1510148386.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:46.803Z,1510148386.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:46.841Z,1510148386.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:47.201Z,1510148387.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:47.245Z,1510148387.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:47.635Z,1510148387.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:47.651Z,1510148387.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:47.000Z,1510148388.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:48.051Z,1510148388.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:48.414Z,1510148388.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:48.446Z,1510148388.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:49.097Z,1510148389.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:49.113Z,1510148389.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:49.246Z,1510148389.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:49.288Z,1510148389.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:49.665Z,1510148389.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:49.696Z,1510148389.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:50.061Z,1510148390.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:50.096Z,1510148390.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:50.461Z,1510148390.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:50.499Z,1510148390.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:50.851Z,1510148390.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:50.888Z,1510148390.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:51.252Z,1510148391.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:51.267Z,1510148391.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:51.679Z,1510148391.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:51.700Z,1510148391.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:52.065Z,1510148392.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:52.090Z,1510148392.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:52.739Z,1510148392.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:52.755Z,1510148392.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:52.863Z,1510148392.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:52.889Z,1510148392.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:53.280Z,1510148393.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:53.301Z,1510148393.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:53.669Z,1510148393.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:53.694Z,1510148393.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:54.081Z,1510148394.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:54.097Z,1510148394.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:54.464Z,1510148394.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:54.511Z,1510148394.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:54.864Z,1510148394.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:54.880Z,1510148394.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:55.265Z,1510148395.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:55.281Z,1510148395.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:55.686Z,1510148395.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:55.712Z,1510148395.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:56.058Z,1510148396.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:56.115Z,1510148396.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:56.474Z,1510148396.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:56.508Z,1510148396.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:57.159Z,1510148397.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:57.180Z,1510148397.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:57.292Z,1510148397.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:57.353Z,1510148397.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:57.716Z,1510148397.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:57.722Z,1510148397.722 [PNI_TCM](ERROR): CRC does not match. Expected:0x54822 got:0x28
2017-11-08T13:39:57.758Z,1510148397.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:58.111Z,1510148398.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:58.131Z,1510148398.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:58.501Z,1510148398.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:58.539Z,1510148398.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:58.892Z,1510148398.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:58.922Z,1510148398.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:59.318Z,1510148399.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:59.334Z,1510148399.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:39:59.710Z,1510148399.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:39:59.727Z,1510148399.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:00.390Z,1510148400.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:00.416Z,1510148400.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:00.538Z,1510148400.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:00.576Z,1510148400.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:00.963Z,1510148400.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:00.980Z,1510148400.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:01.364Z,1510148401.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:01.380Z,1510148401.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:01.763Z,1510148401.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:01.780Z,1510148401.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:02.144Z,1510148402.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:02.179Z,1510148402.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:02.540Z,1510148402.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:02.566Z,1510148402.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:02.944Z,1510148402.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:02.978Z,1510148402.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:03.370Z,1510148403.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:03.387Z,1510148403.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:03.743Z,1510148403.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:03.771Z,1510148403.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:04.160Z,1510148404.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:04.177Z,1510148404.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:04.869Z,1510148404.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:04.891Z,1510148404.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:05.031Z,1510148405.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:05.064Z,1510148405.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:05.442Z,1510148405.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:05.467Z,1510148405.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:05.841Z,1510148405.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:05.868Z,1510148405.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:06.241Z,1510148406.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:06.274Z,1510148406.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:06.635Z,1510148406.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:06.651Z,1510148406.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:07.031Z,1510148407.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:07.093Z,1510148407.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:07.467Z,1510148407.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:07.483Z,1510148407.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:07.845Z,1510148407.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:07.877Z,1510148407.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:08.522Z,1510148408.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:08.593Z,1510148408.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:08.693Z,1510148408.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:08.732Z,1510148408.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:09.120Z,1510148409.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:09.137Z,1510148409.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:09.519Z,1510148409.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:09.578Z,1510148409.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:09.920Z,1510148409.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:09.937Z,1510148409.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:10.295Z,1510148410.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:10.352Z,1510148410.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:10.699Z,1510148410.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:10.715Z,1510148410.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:11.099Z,1510148411.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:11.115Z,1510148411.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:11.532Z,1510148411.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:11.555Z,1510148411.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:11.899Z,1510148411.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:11.914Z,1510148411.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:12.309Z,1510148412.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:12.334Z,1510148412.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:12.998Z,1510148412.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:13.014Z,1510148413.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:13.121Z,1510148413.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:13.163Z,1510148413.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:13.547Z,1510148413.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:13.567Z,1510148413.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:13.946Z,1510148413.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:13.967Z,1510148413.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:14.340Z,1510148414.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:14.356Z,1510148414.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:14.734Z,1510148414.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:14.750Z,1510148414.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:15.132Z,1510148415.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:15.148Z,1510148415.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:15.550Z,1510148415.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:15.572Z,1510148415.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:15.948Z,1510148415.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:15.971Z,1510148415.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:16.626Z,1510148416.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:16.647Z,1510148416.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:16.761Z,1510148416.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:16.807Z,1510148416.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:17.188Z,1510148417.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:17.204Z,1510148417.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:17.586Z,1510148417.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:17.602Z,1510148417.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:17.984Z,1510148417.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:18.000Z,1510148418.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:18.367Z,1510148418.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:18.409Z,1510148418.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:18.763Z,1510148418.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:18.797Z,1510148418.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:19.168Z,1510148419.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:19.198Z,1510148419.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:19.598Z,1510148419.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:19.619Z,1510148419.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:19.967Z,1510148419.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:19.998Z,1510148419.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:20.387Z,1510148420.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:20.404Z,1510148420.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:21.062Z,1510148421.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:21.093Z,1510148421.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:21.207Z,1510148421.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:21.254Z,1510148421.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:21.622Z,1510148421.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:21.647Z,1510148421.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:22.025Z,1510148422.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:22.051Z,1510148422.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:22.422Z,1510148422.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:22.447Z,1510148422.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:22.811Z,1510148422.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:22.864Z,1510148422.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:23.215Z,1510148423.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:23.231Z,1510148423.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:23.638Z,1510148423.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:23.661Z,1510148423.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:24.025Z,1510148424.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:24.058Z,1510148424.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:24.707Z,1510148424.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:24.723Z,1510148424.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:24.833Z,1510148424.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:24.874Z,1510148424.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:25.259Z,1510148425.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:25.276Z,1510148425.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:25.660Z,1510148425.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:25.679Z,1510148425.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:26.060Z,1510148426.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:26.076Z,1510148426.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:26.439Z,1510148426.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:26.468Z,1510148426.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:26.839Z,1510148426.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:26.872Z,1510148426.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:27.240Z,1510148427.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:27.276Z,1510148427.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:27.671Z,1510148427.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:27.691Z,1510148427.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:28.039Z,1510148428.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:28.072Z,1510148428.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:28.453Z,1510148428.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:28.483Z,1510148428.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:29.138Z,1510148429.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:29.177Z,1510148429.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:29.291Z,1510148429.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:29.335Z,1510148429.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:29.699Z,1510148429.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:29.723Z,1510148429.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:30.103Z,1510148430.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:30.127Z,1510148430.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:30.501Z,1510148430.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:30.588Z,1510148430.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:30.885Z,1510148430.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:30.924Z,1510148430.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:31.312Z,1510148431.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:31.335Z,1510148431.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:31.696Z,1510148431.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:31.720Z,1510148431.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:32.378Z,1510148432.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:32.394Z,1510148432.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:32.497Z,1510148432.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:32.543Z,1510148432.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:32.923Z,1510148432.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:32.943Z,1510148432.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:33.320Z,1510148433.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:33.343Z,1510148433.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:33.709Z,1510148433.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:33.727Z,1510148433.727 [BPC1](ERROR): Failed to receive battery data
2017-11-08T13:40:33.728Z,1510148433.728 [BPC1] Communications Fault, FailCount= 1
2017-11-08T13:40:33.728Z,1510148433.728 [BPC1](ERROR): Communications Fault
2017-11-08T13:40:33.750Z,1510148433.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:33.841Z,1510148433.841 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T13:40:34.103Z,1510148434.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:34.135Z,1510148434.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:34.501Z,1510148434.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:34.509Z,1510148434.509 [PNI_TCM](ERROR): CRC does not match. Expected:0x47960 got:0x7361
2017-11-08T13:40:34.551Z,1510148434.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:34.906Z,1510148434.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:34.923Z,1510148434.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:35.017Z,1510148435.017 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T13:40:35.017Z,1510148435.017 [BPC1] No Fault, FailCount= 1
2017-11-08T13:40:35.338Z,1510148435.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:35.404Z,1510148435.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:35.703Z,1510148435.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:35.751Z,1510148435.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:36.118Z,1510148436.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:36.125Z,1510148436.125 [PNI_TCM](ERROR): CRC does not match. Expected:0x4116 got:0x7361
2017-11-08T13:40:36.151Z,1510148436.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:36.798Z,1510148436.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:36.814Z,1510148436.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:36.914Z,1510148436.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:36.960Z,1510148436.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:37.344Z,1510148437.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:37.351Z,1510148437.351 [PNI_TCM](ERROR): CRC does not match. Expected:0x13754 got:0x17031
2017-11-08T13:40:37.393Z,1510148437.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:37.740Z,1510148437.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:37.756Z,1510148437.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:38.138Z,1510148438.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:38.159Z,1510148438.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:38.522Z,1510148438.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:38.554Z,1510148438.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:38.919Z,1510148438.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:38.950Z,1510148438.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:39.351Z,1510148439.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:39.372Z,1510148439.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:39.741Z,1510148439.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:39.758Z,1510148439.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:40.410Z,1510148440.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:40.426Z,1510148440.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:40.556Z,1510148440.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:40.572Z,1510148440.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:40.966Z,1510148440.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:41.001Z,1510148441.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:41.365Z,1510148441.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:41.397Z,1510148441.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:41.766Z,1510148441.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:41.796Z,1510148441.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:42.156Z,1510148442.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:42.172Z,1510148442.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:42.555Z,1510148442.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:42.571Z,1510148442.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:42.952Z,1510148442.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:42.970Z,1510148442.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:43.378Z,1510148443.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:43.402Z,1510148443.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:43.751Z,1510148443.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:43.802Z,1510148443.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:44.166Z,1510148444.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:44.201Z,1510148444.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:44.840Z,1510148444.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:44.859Z,1510148444.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:44.961Z,1510148444.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:44.978Z,1510148444.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:45.383Z,1510148445.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:45.419Z,1510148445.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:45.777Z,1510148445.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:45.803Z,1510148445.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:46.182Z,1510148446.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:46.210Z,1510148446.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:46.572Z,1510148446.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:46.608Z,1510148446.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:46.967Z,1510148446.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:46.984Z,1510148446.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:47.401Z,1510148447.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:47.417Z,1510148447.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:47.782Z,1510148447.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:47.816Z,1510148447.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:48.455Z,1510148448.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:48.471Z,1510148448.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:48.569Z,1510148448.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:48.586Z,1510148448.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:48.990Z,1510148448.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:49.025Z,1510148449.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:49.386Z,1510148449.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:49.411Z,1510148449.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:49.786Z,1510148449.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:49.825Z,1510148449.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:50.176Z,1510148450.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:50.223Z,1510148450.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:50.576Z,1510148450.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:50.613Z,1510148450.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:50.977Z,1510148450.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:51.009Z,1510148451.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:51.408Z,1510148451.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:51.424Z,1510148451.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:51.772Z,1510148451.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:51.791Z,1510148451.791 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:51.792Z,1510148451.792 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2017-11-08T13:40:51.792Z,1510148451.792 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T13:40:51.793Z,1510148451.793 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:51.794Z,1510148451.794 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2017-11-08T13:40:51.794Z,1510148451.794 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T13:40:51.795Z,1510148451.795 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:51.795Z,1510148451.795 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-11-08T13:40:51.795Z,1510148451.795 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T13:40:51.906Z,1510148451.906 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T13:40:51.906Z,1510148451.906 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T13:40:51.906Z,1510148451.906 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T13:40:52.189Z,1510148452.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:52.297Z,1510148452.297 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T13:40:52.297Z,1510148452.297 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2017-11-08T13:40:52.297Z,1510148452.297 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T13:40:52.297Z,1510148452.297 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2017-11-08T13:40:52.298Z,1510148452.298 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T13:40:52.298Z,1510148452.298 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-11-08T13:40:52.872Z,1510148452.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:52.895Z,1510148452.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T13:40:52.895Z,1510148452.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:40:52.895Z,1510148452.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:40:52.896Z,1510148452.896 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T13:40:52.896Z,1510148452.896 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:40:52.897Z,1510148452.897 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:40:52.897Z,1510148452.897 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T13:40:52.897Z,1510148452.897 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:40:52.898Z,1510148452.898 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:40:53.030Z,1510148453.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:53.045Z,1510148453.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2017-11-08T13:40:53.046Z,1510148453.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:53.442Z,1510148453.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:53.477Z,1510148453.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2017-11-08T13:40:53.478Z,1510148453.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:53.842Z,1510148453.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:53.878Z,1510148453.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2017-11-08T13:40:53.879Z,1510148453.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:54.234Z,1510148454.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:54.250Z,1510148454.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2017-11-08T13:40:54.251Z,1510148454.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:54.630Z,1510148454.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:54.646Z,1510148454.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2017-11-08T13:40:54.647Z,1510148454.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:55.031Z,1510148455.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:55.047Z,1510148455.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2017-11-08T13:40:55.048Z,1510148455.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:55.446Z,1510148455.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:55.497Z,1510148455.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2017-11-08T13:40:55.498Z,1510148455.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:55.837Z,1510148455.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:55.859Z,1510148455.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-08T13:40:55.860Z,1510148455.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:56.519Z,1510148456.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:56.564Z,1510148456.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T13:40:56.565Z,1510148456.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:56.675Z,1510148456.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:56.714Z,1510148456.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-08T13:40:56.715Z,1510148456.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:57.097Z,1510148457.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:57.136Z,1510148457.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-08T13:40:57.149Z,1510148457.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:57.485Z,1510148457.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:57.518Z,1510148457.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-08T13:40:57.519Z,1510148457.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:57.881Z,1510148457.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:57.915Z,1510148457.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-08T13:40:57.916Z,1510148457.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:58.275Z,1510148458.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:58.311Z,1510148458.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-08T13:40:58.312Z,1510148458.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:58.675Z,1510148458.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:58.715Z,1510148458.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T13:40:58.716Z,1510148458.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:59.072Z,1510148459.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:59.087Z,1510148459.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-08T13:40:59.088Z,1510148459.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:59.505Z,1510148459.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:59.520Z,1510148459.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T13:40:59.521Z,1510148459.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:40:59.875Z,1510148459.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:40:59.895Z,1510148459.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T13:40:59.896Z,1510148459.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:00.289Z,1510148460.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:00.321Z,1510148460.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T13:41:00.322Z,1510148460.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:00.967Z,1510148460.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:00.991Z,1510148460.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T13:41:00.992Z,1510148460.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:01.103Z,1510148461.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:01.152Z,1510148461.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2017-11-08T13:41:01.167Z,1510148461.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:01.520Z,1510148461.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:01.536Z,1510148461.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T13:41:01.537Z,1510148461.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:01.919Z,1510148461.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:01.935Z,1510148461.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T13:41:01.935Z,1510148461.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:02.315Z,1510148462.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:02.331Z,1510148462.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T13:41:02.332Z,1510148462.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:02.703Z,1510148462.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:02.733Z,1510148462.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T13:41:02.734Z,1510148462.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:03.100Z,1510148463.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:03.124Z,1510148463.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T13:41:03.125Z,1510148463.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:03.526Z,1510148463.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:03.547Z,1510148463.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2017-11-08T13:41:03.548Z,1510148463.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:03.925Z,1510148463.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:03.941Z,1510148463.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T13:41:03.942Z,1510148463.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:04.594Z,1510148464.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:04.623Z,1510148464.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T13:41:04.624Z,1510148464.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:04.743Z,1510148464.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:04.783Z,1510148464.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2017-11-08T13:41:04.784Z,1510148464.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:05.154Z,1510148465.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:05.216Z,1510148465.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2017-11-08T13:41:05.217Z,1510148465.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:05.553Z,1510148465.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:05.578Z,1510148465.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2017-11-08T13:41:05.579Z,1510148465.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:05.954Z,1510148465.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:05.983Z,1510148465.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2017-11-08T13:41:05.984Z,1510148465.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:06.343Z,1510148466.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:06.367Z,1510148466.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2017-11-08T13:41:06.368Z,1510148466.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:06.739Z,1510148466.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:06.759Z,1510148466.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2017-11-08T13:41:06.760Z,1510148466.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:07.145Z,1510148467.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:07.160Z,1510148467.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2017-11-08T13:41:07.177Z,1510148467.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:07.572Z,1510148467.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:07.587Z,1510148467.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-08T13:41:07.589Z,1510148467.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:07.939Z,1510148467.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:07.955Z,1510148467.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-08T13:41:07.956Z,1510148467.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:08.357Z,1510148468.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:08.384Z,1510148468.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-08T13:41:08.385Z,1510148468.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:09.076Z,1510148469.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:09.091Z,1510148469.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T13:41:09.092Z,1510148469.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:09.203Z,1510148469.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:09.229Z,1510148469.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-08T13:41:09.230Z,1510148469.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:09.620Z,1510148469.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:09.636Z,1510148469.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-08T13:41:09.637Z,1510148469.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:10.020Z,1510148470.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:10.043Z,1510148470.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2017-11-08T13:41:10.044Z,1510148470.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:10.409Z,1510148470.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:10.436Z,1510148470.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-08T13:41:10.437Z,1510148470.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:10.799Z,1510148470.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:10.831Z,1510148470.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-08T13:41:10.837Z,1510148470.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:11.199Z,1510148471.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:11.215Z,1510148471.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-08T13:41:11.216Z,1510148471.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:11.628Z,1510148471.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:11.644Z,1510148471.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2017-11-08T13:41:11.645Z,1510148471.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:12.013Z,1510148472.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:12.046Z,1510148472.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:12.690Z,1510148472.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:12.706Z,1510148472.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:12.813Z,1510148472.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:12.855Z,1510148472.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:13.239Z,1510148473.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:13.255Z,1510148473.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:13.635Z,1510148473.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:13.656Z,1510148473.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:14.039Z,1510148474.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:14.055Z,1510148474.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:14.425Z,1510148474.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:14.442Z,1510148474.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:14.823Z,1510148474.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:14.848Z,1510148474.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:15.227Z,1510148475.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:15.243Z,1510148475.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:15.650Z,1510148475.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:15.666Z,1510148475.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:16.019Z,1510148476.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:16.043Z,1510148476.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:16.443Z,1510148476.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:16.459Z,1510148476.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:17.124Z,1510148477.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:17.167Z,1510148477.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:17.299Z,1510148477.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:17.338Z,1510148477.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:17.712Z,1510148477.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:17.718Z,1510148477.718 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-11-08T13:41:17.751Z,1510148477.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:18.110Z,1510148478.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:18.145Z,1510148478.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:18.501Z,1510148478.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:18.543Z,1510148478.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:18.903Z,1510148478.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:18.948Z,1510148478.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:19.322Z,1510148479.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:19.346Z,1510148479.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:19.710Z,1510148479.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:19.738Z,1510148479.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:20.391Z,1510148480.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:20.399Z,1510148480.399 [BPC1](ERROR): Failed to receive battery data
2017-11-08T13:41:20.399Z,1510148480.399 [BPC1] Communications Fault, FailCount= 1
2017-11-08T13:41:20.399Z,1510148480.399 [BPC1](ERROR): Communications Fault
2017-11-08T13:41:20.409Z,1510148480.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:20.481Z,1510148480.481 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T13:41:20.510Z,1510148480.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:20.541Z,1510148480.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:20.922Z,1510148480.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:20.939Z,1510148480.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:21.329Z,1510148481.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:21.345Z,1510148481.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:21.449Z,1510148481.449 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T13:41:21.449Z,1510148481.449 [BPC1] No Fault, FailCount= 1
2017-11-08T13:41:21.724Z,1510148481.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:21.807Z,1510148481.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:22.118Z,1510148482.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:22.134Z,1510148482.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:22.520Z,1510148482.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:22.536Z,1510148482.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:22.918Z,1510148482.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:22.934Z,1510148482.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:23.335Z,1510148483.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:23.366Z,1510148483.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:23.718Z,1510148483.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:23.734Z,1510148483.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:24.126Z,1510148484.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:24.142Z,1510148484.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:24.808Z,1510148484.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:24.823Z,1510148484.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:24.941Z,1510148484.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:24.973Z,1510148484.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:25.364Z,1510148485.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:25.380Z,1510148485.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:25.763Z,1510148485.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:25.779Z,1510148485.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:26.164Z,1510148486.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:26.181Z,1510148486.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:26.547Z,1510148486.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:26.573Z,1510148486.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:26.948Z,1510148486.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:26.976Z,1510148486.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:27.372Z,1510148487.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:27.389Z,1510148487.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:27.762Z,1510148487.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:27.779Z,1510148487.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:28.429Z,1510148488.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:28.445Z,1510148488.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:28.582Z,1510148488.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:28.599Z,1510148488.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:29.002Z,1510148489.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:29.034Z,1510148489.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:29.401Z,1510148489.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:29.426Z,1510148489.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:29.797Z,1510148489.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:29.852Z,1510148489.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:30.188Z,1510148490.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:30.204Z,1510148490.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:30.587Z,1510148490.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:30.603Z,1510148490.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:30.989Z,1510148490.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:31.005Z,1510148491.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:31.416Z,1510148491.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:31.432Z,1510148491.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:31.788Z,1510148491.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:31.804Z,1510148491.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:32.201Z,1510148492.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:32.229Z,1510148492.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:32.879Z,1510148492.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:32.896Z,1510148492.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:33.001Z,1510148493.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:33.044Z,1510148493.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:33.428Z,1510148493.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:33.445Z,1510148493.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:33.828Z,1510148493.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:33.844Z,1510148493.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:34.220Z,1510148494.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:34.236Z,1510148494.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:34.607Z,1510148494.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:34.633Z,1510148494.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:35.008Z,1510148495.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:35.040Z,1510148495.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:35.431Z,1510148495.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:35.448Z,1510148495.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:35.829Z,1510148495.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:35.851Z,1510148495.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:36.501Z,1510148496.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:36.531Z,1510148496.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:36.642Z,1510148496.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:36.658Z,1510148496.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:37.061Z,1510148497.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:37.096Z,1510148497.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:37.462Z,1510148497.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:37.491Z,1510148497.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:37.858Z,1510148497.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:37.884Z,1510148497.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:38.248Z,1510148498.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:38.264Z,1510148498.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:38.648Z,1510148498.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:38.664Z,1510148498.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:39.048Z,1510148499.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:39.064Z,1510148499.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:39.475Z,1510148499.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:39.495Z,1510148499.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:39.849Z,1510148499.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:39.866Z,1510148499.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:40.261Z,1510148500.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:40.290Z,1510148500.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:40.941Z,1510148500.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:41.008Z,1510148501.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:41.119Z,1510148501.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:41.168Z,1510148501.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:41.536Z,1510148501.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:41.560Z,1510148501.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:41.940Z,1510148501.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:41.993Z,1510148501.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:42.336Z,1510148502.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:42.359Z,1510148502.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:42.719Z,1510148502.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:42.775Z,1510148502.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:43.120Z,1510148503.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:43.145Z,1510148503.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:43.547Z,1510148503.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:43.567Z,1510148503.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:43.940Z,1510148503.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:43.956Z,1510148503.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:44.606Z,1510148504.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:44.622Z,1510148504.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:44.755Z,1510148504.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:44.800Z,1510148504.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:45.174Z,1510148505.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:45.217Z,1510148505.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:45.573Z,1510148505.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:45.598Z,1510148505.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:45.974Z,1510148505.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:46.007Z,1510148506.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:46.359Z,1510148506.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:46.376Z,1510148506.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:46.759Z,1510148506.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:46.775Z,1510148506.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:47.160Z,1510148507.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:47.204Z,1510148507.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:47.591Z,1510148507.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:47.607Z,1510148507.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:47.959Z,1510148507.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:47.975Z,1510148507.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:48.372Z,1510148508.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:48.402Z,1510148508.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:49.847Z,1510148509.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:49.863Z,1510148509.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:49.961Z,1510148509.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:50.014Z,1510148510.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:50.382Z,1510148510.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:50.412Z,1510148510.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:50.792Z,1510148510.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:50.854Z,1510148510.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:51.181Z,1510148511.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:51.222Z,1510148511.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:51.567Z,1510148511.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:51.584Z,1510148511.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:51.972Z,1510148511.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:52.005Z,1510148512.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:52.400Z,1510148512.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:52.417Z,1510148512.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:52.781Z,1510148512.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:52.812Z,1510148512.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:53.458Z,1510148513.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:53.473Z,1510148513.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:53.577Z,1510148513.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:53.611Z,1510148513.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:54.003Z,1510148514.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:54.019Z,1510148514.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:54.403Z,1510148514.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:54.423Z,1510148514.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:54.800Z,1510148514.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:54.816Z,1510148514.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:55.183Z,1510148515.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:55.209Z,1510148515.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:55.583Z,1510148515.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:55.618Z,1510148515.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:55.984Z,1510148515.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:56.010Z,1510148516.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:56.410Z,1510148516.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:56.426Z,1510148516.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:56.783Z,1510148516.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:56.814Z,1510148516.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:57.205Z,1510148517.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:57.221Z,1510148517.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:57.910Z,1510148517.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:57.926Z,1510148517.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:58.061Z,1510148518.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:58.104Z,1510148518.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:58.465Z,1510148518.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:58.481Z,1510148518.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:58.866Z,1510148518.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:58.882Z,1510148518.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:59.261Z,1510148519.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:59.278Z,1510148519.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:41:59.656Z,1510148519.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:41:59.684Z,1510148519.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:00.057Z,1510148520.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:00.080Z,1510148520.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:00.474Z,1510148520.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:00.507Z,1510148520.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:00.865Z,1510148520.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:00.887Z,1510148520.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:01.553Z,1510148521.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:01.623Z,1510148521.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:01.741Z,1510148521.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:01.781Z,1510148521.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:02.154Z,1510148522.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:02.180Z,1510148522.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:02.554Z,1510148522.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:02.584Z,1510148522.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:02.949Z,1510148522.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:03.004Z,1510148523.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:03.344Z,1510148523.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:03.380Z,1510148523.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:03.743Z,1510148523.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:03.795Z,1510148523.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:04.140Z,1510148524.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:04.169Z,1510148524.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:04.569Z,1510148524.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:04.627Z,1510148524.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:04.944Z,1510148524.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:04.960Z,1510148524.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:05.357Z,1510148525.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:05.385Z,1510148525.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:06.030Z,1510148526.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:06.046Z,1510148526.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:06.145Z,1510148526.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:06.161Z,1510148526.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:06.566Z,1510148526.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:06.595Z,1510148526.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:06.960Z,1510148526.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:06.996Z,1510148526.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:07.362Z,1510148527.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:07.394Z,1510148527.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:07.752Z,1510148527.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:07.768Z,1510148527.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:08.152Z,1510148528.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:08.167Z,1510148528.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:08.574Z,1510148528.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:08.597Z,1510148528.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:08.965Z,1510148528.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:09.001Z,1510148529.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:09.640Z,1510148529.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:09.656Z,1510148529.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:09.767Z,1510148529.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:09.803Z,1510148529.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:10.178Z,1510148530.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:10.210Z,1510148530.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:10.574Z,1510148530.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:10.600Z,1510148530.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:10.970Z,1510148530.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:11.002Z,1510148531.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:11.363Z,1510148531.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:11.380Z,1510148531.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:11.764Z,1510148531.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:11.780Z,1510148531.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:12.168Z,1510148532.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:12.201Z,1510148532.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:12.599Z,1510148532.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:12.657Z,1510148532.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:12.967Z,1510148532.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:12.984Z,1510148532.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:13.382Z,1510148533.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:13.408Z,1510148533.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:14.062Z,1510148534.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:14.083Z,1510148534.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:14.221Z,1510148534.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:14.255Z,1510148534.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:14.634Z,1510148534.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:14.660Z,1510148534.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:15.037Z,1510148535.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:15.067Z,1510148535.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:15.437Z,1510148535.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:15.464Z,1510148535.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:15.819Z,1510148535.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:15.835Z,1510148535.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:16.224Z,1510148536.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:16.264Z,1510148536.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:16.652Z,1510148536.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:16.669Z,1510148536.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:17.037Z,1510148537.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:17.070Z,1510148537.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:17.704Z,1510148537.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:17.723Z,1510148537.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:17.821Z,1510148537.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:17.837Z,1510148537.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:18.242Z,1510148538.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:18.272Z,1510148538.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:18.641Z,1510148538.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:18.671Z,1510148538.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:19.041Z,1510148539.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:19.068Z,1510148539.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:19.427Z,1510148539.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:19.444Z,1510148539.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:19.827Z,1510148539.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:19.848Z,1510148539.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:20.232Z,1510148540.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:20.248Z,1510148540.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:20.658Z,1510148540.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:20.674Z,1510148540.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:21.027Z,1510148541.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:21.047Z,1510148541.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:21.441Z,1510148541.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:21.474Z,1510148541.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:22.125Z,1510148542.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:22.141Z,1510148542.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:22.255Z,1510148542.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:22.303Z,1510148542.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:22.676Z,1510148542.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:22.693Z,1510148542.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:23.075Z,1510148543.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:23.092Z,1510148543.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:23.472Z,1510148543.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:23.531Z,1510148543.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:23.856Z,1510148543.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:23.895Z,1510148543.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:24.256Z,1510148544.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:24.281Z,1510148544.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:24.682Z,1510148544.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:24.743Z,1510148544.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:25.077Z,1510148545.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:25.093Z,1510148545.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:25.747Z,1510148545.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:25.804Z,1510148545.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:25.915Z,1510148545.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:25.977Z,1510148545.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:26.336Z,1510148546.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:26.381Z,1510148546.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:26.735Z,1510148546.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:26.751Z,1510148546.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:27.132Z,1510148547.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:27.148Z,1510148547.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:27.515Z,1510148547.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:27.539Z,1510148547.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:27.916Z,1510148547.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:27.948Z,1510148547.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:28.342Z,1510148548.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:28.359Z,1510148548.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:28.715Z,1510148548.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:28.741Z,1510148548.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:29.115Z,1510148549.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:29.140Z,1510148549.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:29.535Z,1510148549.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:29.551Z,1510148549.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:30.206Z,1510148550.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:30.242Z,1510148550.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:30.350Z,1510148550.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:30.399Z,1510148550.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:30.766Z,1510148550.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:30.798Z,1510148550.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:31.165Z,1510148551.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:31.190Z,1510148551.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:31.562Z,1510148551.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:31.586Z,1510148551.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:31.955Z,1510148551.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:31.989Z,1510148551.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:32.351Z,1510148552.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:32.393Z,1510148552.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:32.751Z,1510148552.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:32.767Z,1510148552.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:33.156Z,1510148553.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:33.189Z,1510148553.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:33.588Z,1510148553.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:33.603Z,1510148553.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:33.966Z,1510148553.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:33.998Z,1510148553.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:34.654Z,1510148554.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:34.703Z,1510148554.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:34.805Z,1510148554.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:34.847Z,1510148554.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:35.228Z,1510148555.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:35.244Z,1510148555.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:35.631Z,1510148555.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:35.647Z,1510148555.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:36.029Z,1510148556.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:36.045Z,1510148556.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:36.411Z,1510148556.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:36.442Z,1510148556.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:36.811Z,1510148556.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:36.841Z,1510148556.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:37.212Z,1510148557.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:37.249Z,1510148557.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:37.639Z,1510148557.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:37.655Z,1510148557.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:38.011Z,1510148558.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:38.045Z,1510148558.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:38.421Z,1510148558.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:38.462Z,1510148558.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:39.102Z,1510148559.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:39.123Z,1510148559.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:39.259Z,1510148559.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:39.306Z,1510148559.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:39.666Z,1510148559.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:39.706Z,1510148559.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:40.066Z,1510148560.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:40.098Z,1510148560.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:40.466Z,1510148560.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:40.482Z,1510148560.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:40.857Z,1510148560.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:40.873Z,1510148560.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:41.257Z,1510148561.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:41.273Z,1510148561.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:41.674Z,1510148561.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:41.706Z,1510148561.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:42.070Z,1510148562.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:42.086Z,1510148562.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:42.753Z,1510148562.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:42.776Z,1510148562.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:42.888Z,1510148562.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:42.920Z,1510148562.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:43.308Z,1510148563.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:43.333Z,1510148563.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:43.709Z,1510148563.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:43.728Z,1510148563.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:44.111Z,1510148564.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:44.132Z,1510148564.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:44.489Z,1510148564.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:44.521Z,1510148564.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:44.887Z,1510148564.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:44.929Z,1510148564.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:45.316Z,1510148565.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:45.386Z,1510148565.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:45.687Z,1510148565.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:45.723Z,1510148565.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:46.088Z,1510148566.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:46.116Z,1510148566.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:46.507Z,1510148566.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:46.539Z,1510148566.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:46.641Z,1510148566.641 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T13:42:47.182Z,1510148567.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:47.233Z,1510148567.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:47.330Z,1510148567.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:47.355Z,1510148567.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:47.746Z,1510148567.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:47.779Z,1510148567.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:48.145Z,1510148568.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:48.196Z,1510148568.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:48.556Z,1510148568.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:48.573Z,1510148568.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:48.936Z,1510148568.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:48.987Z,1510148568.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:49.363Z,1510148569.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:49.389Z,1510148569.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:49.745Z,1510148569.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:49.779Z,1510148569.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:50.430Z,1510148570.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:50.446Z,1510148570.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:50.577Z,1510148570.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:50.593Z,1510148570.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:50.994Z,1510148570.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:51.020Z,1510148571.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:51.408Z,1510148571.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:51.431Z,1510148571.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:51.793Z,1510148571.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:51.832Z,1510148571.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:52.188Z,1510148572.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:52.222Z,1510148572.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:52.587Z,1510148572.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:52.624Z,1510148572.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:52.985Z,1510148572.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:53.017Z,1510148573.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:53.413Z,1510148573.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:53.429Z,1510148573.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:53.788Z,1510148573.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:53.804Z,1510148573.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:54.193Z,1510148574.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:54.225Z,1510148574.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:54.923Z,1510148574.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:54.944Z,1510148574.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:55.055Z,1510148575.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:55.103Z,1510148575.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:55.476Z,1510148575.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:55.492Z,1510148575.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:55.872Z,1510148575.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:55.888Z,1510148575.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:56.271Z,1510148576.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:56.287Z,1510148576.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:56.655Z,1510148576.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:56.683Z,1510148576.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:57.056Z,1510148577.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:57.125Z,1510148577.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:57.478Z,1510148577.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:57.499Z,1510148577.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:57.877Z,1510148577.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:57.899Z,1510148577.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:58.546Z,1510148578.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:58.575Z,1510148578.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:58.691Z,1510148578.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:58.731Z,1510148578.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:59.097Z,1510148579.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:59.129Z,1510148579.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:59.501Z,1510148579.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:59.528Z,1510148579.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:42:59.897Z,1510148579.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:42:59.946Z,1510148579.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:00.287Z,1510148580.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:00.303Z,1510148580.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:00.681Z,1510148580.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:00.697Z,1510148580.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:01.084Z,1510148581.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:01.100Z,1510148581.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:01.520Z,1510148581.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:01.535Z,1510148581.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:01.881Z,1510148581.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:01.897Z,1510148581.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:02.297Z,1510148582.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:02.323Z,1510148582.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:02.976Z,1510148582.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:02.992Z,1510148582.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:03.093Z,1510148583.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:03.143Z,1510148583.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:03.510Z,1510148583.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:03.540Z,1510148583.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:03.909Z,1510148583.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:03.940Z,1510148583.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:04.310Z,1510148584.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:04.340Z,1510148584.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:04.699Z,1510148584.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:04.733Z,1510148584.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:05.100Z,1510148585.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:05.135Z,1510148585.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:05.209Z,1510148585.209 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T13:43:05.209Z,1510148585.209 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T13:43:05.345Z,1510148585.345 [Rowe_600LCM](INFO): Initializing
2017-11-08T13:43:05.345Z,1510148585.345 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T13:43:05.345Z,1510148585.345 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T13:43:05.345Z,1510148585.345 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T13:43:05.345Z,1510148585.345 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T13:43:05.522Z,1510148585.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:05.542Z,1510148585.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:05.621Z,1510148585.621 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:43:05.749Z,1510148585.749 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T13:43:05.837Z,1510148585.837 [Rowe_600LCM](INFO): Powering down
2017-11-08T13:43:05.929Z,1510148585.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:05.948Z,1510148585.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:06.593Z,1510148586.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:06.610Z,1510148586.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:06.747Z,1510148586.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:06.780Z,1510148586.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:07.158Z,1510148587.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:07.188Z,1510148587.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:07.269Z,1510148587.269 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T13:43:07.269Z,1510148587.269 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T13:43:07.453Z,1510148587.453 [Rowe_600LCM](INFO): Initializing
2017-11-08T13:43:07.453Z,1510148587.453 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T13:43:07.453Z,1510148587.453 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T13:43:07.453Z,1510148587.453 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T13:43:07.453Z,1510148587.453 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T13:43:07.557Z,1510148587.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:07.595Z,1510148587.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:07.673Z,1510148587.673 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:43:07.857Z,1510148587.857 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T13:43:07.970Z,1510148587.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:07.989Z,1510148587.989 [Rowe_600LCM](INFO): Powering down
2017-11-08T13:43:08.053Z,1510148588.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:08.347Z,1510148588.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:08.364Z,1510148588.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:08.747Z,1510148588.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:08.764Z,1510148588.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:09.152Z,1510148589.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:09.208Z,1510148589.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:09.297Z,1510148589.297 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T13:43:09.297Z,1510148589.297 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T13:43:09.570Z,1510148589.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:09.602Z,1510148589.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:09.605Z,1510148589.605 [Rowe_600LCM](INFO): Initializing
2017-11-08T13:43:09.605Z,1510148589.605 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T13:43:09.605Z,1510148589.605 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T13:43:09.606Z,1510148589.606 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T13:43:09.606Z,1510148589.606 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T13:43:09.685Z,1510148589.685 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:43:09.946Z,1510148589.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:09.996Z,1510148589.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:10.009Z,1510148590.009 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T13:43:10.144Z,1510148590.144 [Rowe_600LCM](INFO): Powering down
2017-11-08T13:43:10.366Z,1510148590.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:10.398Z,1510148590.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:11.050Z,1510148591.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:11.100Z,1510148591.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:11.213Z,1510148591.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:11.263Z,1510148591.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:11.639Z,1510148591.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:11.656Z,1510148591.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:11.737Z,1510148591.737 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T13:43:11.737Z,1510148591.737 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T13:43:11.761Z,1510148591.761 [Rowe_600LCM](INFO): Initializing
2017-11-08T13:43:11.761Z,1510148591.761 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T13:43:11.761Z,1510148591.761 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T13:43:11.762Z,1510148591.762 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T13:43:11.762Z,1510148591.762 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T13:43:12.036Z,1510148592.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:12.059Z,1510148592.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:12.141Z,1510148592.141 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:43:12.165Z,1510148592.165 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T13:43:12.261Z,1510148592.261 [Rowe_600LCM](INFO): Powering down
2017-11-08T13:43:12.441Z,1510148592.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:12.459Z,1510148592.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:12.819Z,1510148592.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:12.854Z,1510148592.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:13.220Z,1510148593.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:13.255Z,1510148593.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:13.651Z,1510148593.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:13.668Z,1510148593.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:13.750Z,1510148593.750 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T13:43:13.750Z,1510148593.750 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T13:43:13.877Z,1510148593.877 [Rowe_600LCM](INFO): Initializing
2017-11-08T13:43:13.877Z,1510148593.877 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T13:43:13.877Z,1510148593.877 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T13:43:13.877Z,1510148593.877 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T13:43:13.878Z,1510148593.878 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T13:43:14.036Z,1510148594.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:14.064Z,1510148594.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:14.141Z,1510148594.141 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:43:14.141Z,1510148594.141 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:43:14.281Z,1510148594.281 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T13:43:14.366Z,1510148594.366 [Rowe_600LCM](INFO): Powering down
2017-11-08T13:43:14.718Z,1510148594.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:14.747Z,1510148594.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:14.862Z,1510148594.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:14.911Z,1510148594.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:15.278Z,1510148595.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:15.304Z,1510148595.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:15.681Z,1510148595.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:15.708Z,1510148595.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:16.081Z,1510148596.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:16.112Z,1510148596.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:16.468Z,1510148596.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:16.493Z,1510148596.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:16.871Z,1510148596.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:16.887Z,1510148596.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:17.268Z,1510148597.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:17.285Z,1510148597.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:17.704Z,1510148597.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:17.720Z,1510148597.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:18.071Z,1510148598.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:18.111Z,1510148598.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:18.477Z,1510148598.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:18.502Z,1510148598.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:19.293Z,1510148599.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:19.361Z,1510148599.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:19.473Z,1510148599.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:19.519Z,1510148599.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:19.890Z,1510148599.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:19.917Z,1510148599.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:20.290Z,1510148600.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:20.324Z,1510148600.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:20.690Z,1510148600.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:20.718Z,1510148600.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:21.076Z,1510148601.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:21.093Z,1510148601.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:21.474Z,1510148601.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:21.491Z,1510148601.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:21.875Z,1510148601.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:21.897Z,1510148601.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:22.279Z,1510148602.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:22.317Z,1510148602.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:22.693Z,1510148602.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:22.724Z,1510148602.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:23.081Z,1510148603.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:23.098Z,1510148603.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:23.772Z,1510148603.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:23.788Z,1510148603.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:23.892Z,1510148603.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:23.940Z,1510148603.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:24.318Z,1510148604.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:24.334Z,1510148604.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:24.706Z,1510148604.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:24.742Z,1510148604.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:25.106Z,1510148605.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:25.133Z,1510148605.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:25.497Z,1510148605.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:25.530Z,1510148605.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:25.897Z,1510148605.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:25.929Z,1510148605.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:26.325Z,1510148606.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:26.342Z,1510148606.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:26.700Z,1510148606.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:26.729Z,1510148606.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:27.095Z,1510148607.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:27.113Z,1510148607.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:27.510Z,1510148607.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:27.542Z,1510148607.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:28.192Z,1510148608.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:28.208Z,1510148608.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:28.309Z,1510148608.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:28.360Z,1510148608.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:28.726Z,1510148608.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:28.758Z,1510148608.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:29.137Z,1510148609.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:29.159Z,1510148609.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:29.526Z,1510148609.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:29.552Z,1510148609.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:29.916Z,1510148609.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:29.949Z,1510148609.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:30.349Z,1510148610.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:30.399Z,1510148610.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:30.725Z,1510148610.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:30.760Z,1510148610.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:31.414Z,1510148611.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:31.471Z,1510148611.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:31.598Z,1510148611.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:31.631Z,1510148611.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:32.007Z,1510148612.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:32.024Z,1510148612.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:32.407Z,1510148612.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:32.463Z,1510148612.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:32.808Z,1510148612.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:32.824Z,1510148612.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:33.202Z,1510148613.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:33.263Z,1510148613.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:33.598Z,1510148613.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:33.615Z,1510148613.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:33.000Z,1510148614.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:34.017Z,1510148614.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:34.418Z,1510148614.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:34.434Z,1510148614.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:34.798Z,1510148614.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:34.814Z,1510148614.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:35.209Z,1510148615.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:35.226Z,1510148615.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:35.891Z,1510148615.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:35.907Z,1510148615.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:36.017Z,1510148616.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:36.063Z,1510148616.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:36.449Z,1510148616.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:36.466Z,1510148616.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:36.833Z,1510148616.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:36.867Z,1510148616.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:37.233Z,1510148617.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:37.258Z,1510148617.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:37.625Z,1510148617.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:37.658Z,1510148617.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:38.025Z,1510148618.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:38.041Z,1510148618.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:38.456Z,1510148618.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:38.473Z,1510148618.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:38.842Z,1510148618.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:38.876Z,1510148618.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:39.525Z,1510148619.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:39.541Z,1510148619.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:39.679Z,1510148619.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:39.731Z,1510148619.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:40.112Z,1510148620.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:40.129Z,1510148620.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:40.507Z,1510148620.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:40.524Z,1510148620.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:40.904Z,1510148620.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:40.943Z,1510148620.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:41.280Z,1510148621.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:41.332Z,1510148621.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:41.684Z,1510148621.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:41.717Z,1510148621.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:42.090Z,1510148622.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:42.123Z,1510148622.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:42.519Z,1510148622.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:42.537Z,1510148622.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:42.884Z,1510148622.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:42.931Z,1510148622.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:43.299Z,1510148623.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:43.337Z,1510148623.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:44.022Z,1510148624.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:44.038Z,1510148624.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:44.145Z,1510148624.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:44.174Z,1510148624.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:44.571Z,1510148624.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:44.593Z,1510148624.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:44.970Z,1510148624.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:44.986Z,1510148624.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:45.370Z,1510148625.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:45.392Z,1510148625.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:45.756Z,1510148625.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:45.790Z,1510148625.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:46.153Z,1510148626.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:46.184Z,1510148626.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:46.581Z,1510148626.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:46.604Z,1510148626.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:46.978Z,1510148626.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:47.043Z,1510148627.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:47.661Z,1510148627.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:47.683Z,1510148627.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:47.798Z,1510148627.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:47.827Z,1510148627.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:48.214Z,1510148628.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:48.247Z,1510148628.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:48.614Z,1510148628.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:48.647Z,1510148628.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:49.026Z,1510148629.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:49.043Z,1510148629.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:49.404Z,1510148629.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:49.433Z,1510148629.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:49.804Z,1510148629.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:49.820Z,1510148629.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:50.205Z,1510148630.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:50.221Z,1510148630.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:50.635Z,1510148630.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:50.651Z,1510148630.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:51.008Z,1510148631.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:51.024Z,1510148631.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:51.414Z,1510148631.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:51.446Z,1510148631.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:52.095Z,1510148632.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:52.117Z,1510148632.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:52.253Z,1510148632.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:52.269Z,1510148632.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:52.666Z,1510148632.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:52.701Z,1510148632.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:53.066Z,1510148633.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:53.120Z,1510148633.120 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:53.120Z,1510148633.120 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2017-11-08T13:43:53.120Z,1510148633.120 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T13:43:53.142Z,1510148633.142 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:53.142Z,1510148633.142 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2017-11-08T13:43:53.142Z,1510148633.142 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T13:43:53.143Z,1510148633.143 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:53.143Z,1510148633.143 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-11-08T13:43:53.144Z,1510148633.144 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T13:43:53.229Z,1510148633.229 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T13:43:53.229Z,1510148633.229 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T13:43:53.229Z,1510148633.229 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T13:43:53.458Z,1510148633.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:53.605Z,1510148633.605 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T13:43:53.605Z,1510148633.605 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2017-11-08T13:43:53.605Z,1510148633.605 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T13:43:53.605Z,1510148633.605 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2017-11-08T13:43:53.606Z,1510148633.606 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T13:43:53.606Z,1510148633.606 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-11-08T13:43:53.853Z,1510148633.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:53.874Z,1510148633.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T13:43:53.875Z,1510148633.875 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:43:53.875Z,1510148633.875 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:43:53.876Z,1510148633.876 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T13:43:53.876Z,1510148633.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:43:53.876Z,1510148633.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:43:53.877Z,1510148633.877 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T13:43:53.877Z,1510148633.877 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:43:53.878Z,1510148633.878 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:43:54.244Z,1510148634.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:54.301Z,1510148634.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T13:43:54.302Z,1510148634.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:54.682Z,1510148634.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:54.715Z,1510148634.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T13:43:54.716Z,1510148634.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:55.067Z,1510148635.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:55.122Z,1510148635.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T13:43:55.123Z,1510148635.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:55.737Z,1510148635.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:55.760Z,1510148635.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2017-11-08T13:43:55.761Z,1510148635.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:55.873Z,1510148635.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:55.921Z,1510148635.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T13:43:55.922Z,1510148635.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:56.302Z,1510148636.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:56.318Z,1510148636.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T13:43:56.319Z,1510148636.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:56.690Z,1510148636.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:56.722Z,1510148636.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T13:43:56.723Z,1510148636.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:57.090Z,1510148637.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:57.123Z,1510148637.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T13:43:57.124Z,1510148637.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:57.480Z,1510148637.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:57.511Z,1510148637.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T13:43:57.512Z,1510148637.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:57.875Z,1510148637.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:57.892Z,1510148637.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T13:43:57.893Z,1510148637.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:58.276Z,1510148638.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:58.293Z,1510148638.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T13:43:58.294Z,1510148638.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:58.714Z,1510148638.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:58.730Z,1510148638.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T13:43:58.731Z,1510148638.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:59.083Z,1510148639.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:59.099Z,1510148639.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T13:43:59.100Z,1510148639.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:43:59.494Z,1510148639.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:43:59.522Z,1510148639.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T13:43:59.522Z,1510148639.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:00.179Z,1510148640.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:00.194Z,1510148640.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2017-11-08T13:44:00.195Z,1510148640.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:00.293Z,1510148640.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:00.339Z,1510148640.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T13:44:00.340Z,1510148640.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:00.726Z,1510148640.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:00.747Z,1510148640.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T13:44:00.748Z,1510148640.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:01.121Z,1510148641.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:01.138Z,1510148641.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T13:44:01.138Z,1510148641.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:01.509Z,1510148641.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:01.536Z,1510148641.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T13:44:01.538Z,1510148641.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:01.900Z,1510148641.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:01.935Z,1510148641.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T13:44:01.936Z,1510148641.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:02.333Z,1510148642.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:02.350Z,1510148642.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T13:44:02.351Z,1510148642.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:02.713Z,1510148642.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:02.739Z,1510148642.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T13:44:02.740Z,1510148642.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:03.401Z,1510148643.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:03.445Z,1510148643.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2017-11-08T13:44:03.446Z,1510148643.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:03.547Z,1510148643.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:03.596Z,1510148643.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T13:44:03.597Z,1510148643.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:03.962Z,1510148643.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:03.994Z,1510148643.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T13:44:03.995Z,1510148643.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:04.361Z,1510148644.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:04.388Z,1510148644.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T13:44:04.389Z,1510148644.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:04.762Z,1510148644.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:04.790Z,1510148644.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T13:44:04.791Z,1510148644.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:05.147Z,1510148645.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:05.187Z,1510148645.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T13:44:05.188Z,1510148645.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:05.547Z,1510148645.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:05.563Z,1510148645.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T13:44:05.564Z,1510148645.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:05.952Z,1510148645.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:05.988Z,1510148645.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T13:44:05.989Z,1510148645.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:06.378Z,1510148646.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:06.401Z,1510148646.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T13:44:06.402Z,1510148646.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:06.747Z,1510148646.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:06.762Z,1510148646.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T13:44:06.763Z,1510148646.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:07.165Z,1510148647.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:07.200Z,1510148647.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T13:44:07.201Z,1510148647.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:07.846Z,1510148647.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:07.862Z,1510148647.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2017-11-08T13:44:07.862Z,1510148647.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:07.989Z,1510148647.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:08.035Z,1510148648.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T13:44:08.036Z,1510148648.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:08.366Z,1510148648.366 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T13:44:08.366Z,1510148648.366 [NAL9602] Data Fault, FailCount= 3
2017-11-08T13:44:08.366Z,1510148648.366 [NAL9602](ERROR): Data Fault
2017-11-08T13:44:08.393Z,1510148648.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:08.430Z,1510148648.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T13:44:08.431Z,1510148648.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:08.517Z,1510148648.517 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T13:44:08.762Z,1510148648.762 [NAL9602](INFO): Powering down
2017-11-08T13:44:08.789Z,1510148648.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:08.813Z,1510148648.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T13:44:08.814Z,1510148648.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:09.185Z,1510148649.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:09.202Z,1510148649.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T13:44:09.203Z,1510148649.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:09.589Z,1510148649.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:09.605Z,1510148649.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T13:44:09.606Z,1510148649.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:09.680Z,1510148649.680 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T13:44:09.681Z,1510148649.681 [NAL9602] No Fault, FailCount= 3
2017-11-08T13:44:09.985Z,1510148649.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:10.001Z,1510148650.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T13:44:10.002Z,1510148650.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:10.385Z,1510148650.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:10.401Z,1510148650.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T13:44:10.402Z,1510148650.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:10.787Z,1510148650.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:10.808Z,1510148650.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T13:44:10.809Z,1510148650.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:11.189Z,1510148651.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:11.215Z,1510148651.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T13:44:11.215Z,1510148651.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:11.589Z,1510148651.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:11.605Z,1510148651.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T13:44:11.606Z,1510148651.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:11.993Z,1510148651.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:12.009Z,1510148652.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T13:44:12.010Z,1510148652.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:12.390Z,1510148652.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:12.405Z,1510148652.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T13:44:12.406Z,1510148652.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:12.786Z,1510148652.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:12.807Z,1510148652.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-08T13:44:12.808Z,1510148652.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:13.187Z,1510148653.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:13.211Z,1510148653.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:13.590Z,1510148653.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:13.611Z,1510148653.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:13.979Z,1510148653.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:14.016Z,1510148654.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:14.379Z,1510148654.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:14.412Z,1510148654.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:14.790Z,1510148654.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:14.811Z,1510148654.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:15.179Z,1510148655.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:15.243Z,1510148655.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:15.583Z,1510148655.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:15.629Z,1510148655.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:15.979Z,1510148655.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:16.014Z,1510148656.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:16.379Z,1510148656.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:16.427Z,1510148656.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:16.782Z,1510148656.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:16.807Z,1510148656.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:17.186Z,1510148657.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:17.236Z,1510148657.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:17.579Z,1510148657.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:17.614Z,1510148657.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:17.983Z,1510148657.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:18.007Z,1510148658.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:18.378Z,1510148658.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:18.413Z,1510148658.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:18.779Z,1510148658.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:18.814Z,1510148658.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:19.182Z,1510148659.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:19.207Z,1510148659.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:19.579Z,1510148659.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:19.614Z,1510148659.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:19.979Z,1510148659.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:20.014Z,1510148660.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:20.382Z,1510148660.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:20.407Z,1510148660.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:20.778Z,1510148660.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:20.810Z,1510148660.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:21.179Z,1510148661.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:21.218Z,1510148661.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:21.579Z,1510148661.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:21.609Z,1510148661.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:21.978Z,1510148661.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:22.013Z,1510148662.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:22.379Z,1510148662.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:22.414Z,1510148662.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:22.783Z,1510148662.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:22.807Z,1510148662.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:23.182Z,1510148663.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:23.207Z,1510148663.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:23.579Z,1510148663.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:23.610Z,1510148663.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:23.978Z,1510148663.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:24.010Z,1510148664.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:24.378Z,1510148664.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:24.413Z,1510148664.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:24.783Z,1510148664.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:24.816Z,1510148664.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:25.183Z,1510148665.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:25.207Z,1510148665.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:25.578Z,1510148665.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:25.621Z,1510148665.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:25.983Z,1510148665.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:26.008Z,1510148666.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:26.382Z,1510148666.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:26.407Z,1510148666.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:26.782Z,1510148666.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:26.807Z,1510148666.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:27.183Z,1510148667.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:27.212Z,1510148667.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:27.582Z,1510148667.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:27.611Z,1510148667.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:27.978Z,1510148667.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:28.014Z,1510148668.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:28.383Z,1510148668.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:28.415Z,1510148668.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:28.783Z,1510148668.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:28.811Z,1510148668.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:29.182Z,1510148669.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:29.221Z,1510148669.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:29.582Z,1510148669.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:29.612Z,1510148669.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:29.982Z,1510148669.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:30.007Z,1510148670.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:30.378Z,1510148670.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:30.413Z,1510148670.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:30.782Z,1510148670.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:30.811Z,1510148670.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:31.182Z,1510148671.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:31.212Z,1510148671.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:31.578Z,1510148671.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:31.616Z,1510148671.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:31.982Z,1510148671.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:32.011Z,1510148672.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:32.383Z,1510148672.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:32.408Z,1510148672.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:32.783Z,1510148672.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:32.807Z,1510148672.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:33.187Z,1510148673.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:33.219Z,1510148673.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:33.587Z,1510148673.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:33.620Z,1510148673.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:33.983Z,1510148673.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:34.007Z,1510148674.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:34.383Z,1510148674.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:34.412Z,1510148674.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:34.783Z,1510148674.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:34.814Z,1510148674.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:35.183Z,1510148675.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:35.221Z,1510148675.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:35.583Z,1510148675.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:35.612Z,1510148675.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:35.983Z,1510148675.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:36.018Z,1510148676.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:36.383Z,1510148676.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:36.419Z,1510148676.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:36.783Z,1510148676.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:36.816Z,1510148676.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:37.187Z,1510148677.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:37.220Z,1510148677.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:37.582Z,1510148677.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:37.670Z,1510148677.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:37.986Z,1510148677.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:38.002Z,1510148678.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:38.387Z,1510148678.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:38.443Z,1510148678.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:38.769Z,1510148678.769 [NAL9602](INFO): Powering up NAL9602
2017-11-08T13:44:38.787Z,1510148678.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:38.807Z,1510148678.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:39.186Z,1510148679.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:39.243Z,1510148679.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:39.586Z,1510148679.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:39.603Z,1510148679.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:39.986Z,1510148679.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:40.001Z,1510148680.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:40.386Z,1510148680.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:40.403Z,1510148680.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:40.785Z,1510148680.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:40.807Z,1510148680.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:41.183Z,1510148681.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:41.198Z,1510148681.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:41.586Z,1510148681.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:41.607Z,1510148681.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:41.987Z,1510148681.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:42.003Z,1510148682.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:42.387Z,1510148682.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:42.403Z,1510148682.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:42.787Z,1510148682.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:42.807Z,1510148682.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:43.187Z,1510148683.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:43.208Z,1510148683.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:43.583Z,1510148683.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:43.599Z,1510148683.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:43.991Z,1510148683.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:44.118Z,1510148684.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:44.382Z,1510148684.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:44.578Z,1510148684.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:44.784Z,1510148684.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:44.800Z,1510148684.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:45.191Z,1510148685.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:45.224Z,1510148685.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:45.591Z,1510148685.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:45.623Z,1510148685.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:45.987Z,1510148685.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:46.020Z,1510148686.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:46.387Z,1510148686.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:46.404Z,1510148686.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:46.791Z,1510148686.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:46.808Z,1510148686.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:47.192Z,1510148687.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:47.236Z,1510148687.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:47.592Z,1510148687.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:47.646Z,1510148687.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:47.995Z,1510148687.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:48.012Z,1510148688.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:48.395Z,1510148688.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:48.410Z,1510148688.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:48.794Z,1510148688.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:48.811Z,1510148688.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:49.207Z,1510148689.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:49.241Z,1510148689.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:49.573Z,1510148689.573 [NAL9602](INFO): NAL9602 initialized
2017-11-08T13:44:49.591Z,1510148689.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:49.612Z,1510148689.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:49.991Z,1510148689.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:50.007Z,1510148690.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:50.410Z,1510148690.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:50.442Z,1510148690.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:50.810Z,1510148690.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:50.842Z,1510148690.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:51.206Z,1510148691.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:51.244Z,1510148691.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:51.596Z,1510148691.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:51.612Z,1510148691.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:52.014Z,1510148692.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:52.037Z,1510148692.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:52.402Z,1510148692.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:52.423Z,1510148692.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:53.149Z,1510148693.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:53.165Z,1510148693.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:53.262Z,1510148693.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:53.312Z,1510148693.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:53.689Z,1510148693.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:53.709Z,1510148693.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:54.087Z,1510148694.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:54.106Z,1510148694.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:54.486Z,1510148694.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:54.537Z,1510148694.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:54.867Z,1510148694.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:54.904Z,1510148694.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:55.267Z,1510148695.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:55.310Z,1510148695.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:55.668Z,1510148695.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:55.708Z,1510148695.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:56.097Z,1510148696.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:56.113Z,1510148696.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:56.467Z,1510148696.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:56.492Z,1510148696.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:56.889Z,1510148696.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:56.911Z,1510148696.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:57.562Z,1510148697.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:57.578Z,1510148697.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:57.718Z,1510148697.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:57.750Z,1510148697.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:58.128Z,1510148698.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:58.155Z,1510148698.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:58.519Z,1510148698.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:58.553Z,1510148698.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:58.926Z,1510148698.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:58.951Z,1510148698.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:59.311Z,1510148699.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:59.376Z,1510148699.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:44:59.708Z,1510148699.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:44:59.717Z,1510148699.717 [PNI_TCM](ERROR): CRC does not match. Expected:0x4405 got:0x978
2017-11-08T13:44:59.780Z,1510148699.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:00.130Z,1510148700.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:00.155Z,1510148700.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:00.529Z,1510148700.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:00.583Z,1510148700.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:01.200Z,1510148701.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:01.216Z,1510148701.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:01.332Z,1510148701.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:01.379Z,1510148701.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:01.754Z,1510148701.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:01.776Z,1510148701.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:02.152Z,1510148702.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:02.170Z,1510148702.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:02.553Z,1510148702.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:02.570Z,1510148702.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:02.935Z,1510148702.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:02.968Z,1510148702.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:03.331Z,1510148703.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:03.346Z,1510148703.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:03.736Z,1510148703.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:03.752Z,1510148703.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:04.167Z,1510148704.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:04.185Z,1510148704.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:04.538Z,1510148704.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:04.580Z,1510148704.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:04.953Z,1510148704.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:04.978Z,1510148704.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:05.629Z,1510148705.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:05.645Z,1510148705.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:05.745Z,1510148705.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:05.773Z,1510148705.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:06.177Z,1510148706.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:06.194Z,1510148706.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:06.572Z,1510148706.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:06.589Z,1510148706.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:06.957Z,1510148706.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:06.990Z,1510148706.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:07.353Z,1510148707.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:07.392Z,1510148707.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:07.749Z,1510148707.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:07.781Z,1510148707.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:08.180Z,1510148708.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:08.197Z,1510148708.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:08.570Z,1510148708.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:08.594Z,1510148708.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:09.241Z,1510148709.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:09.257Z,1510148709.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:09.395Z,1510148709.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:09.447Z,1510148709.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:09.806Z,1510148709.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:09.827Z,1510148709.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:10.210Z,1510148710.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:10.233Z,1510148710.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:10.602Z,1510148710.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:10.634Z,1510148710.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:10.997Z,1510148710.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:11.013Z,1510148711.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:11.391Z,1510148711.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:11.415Z,1510148711.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:11.794Z,1510148711.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:11.811Z,1510148711.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:12.218Z,1510148712.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:12.248Z,1510148712.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:12.593Z,1510148712.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:12.615Z,1510148712.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:13.002Z,1510148713.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:13.018Z,1510148713.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:13.690Z,1510148713.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:13.706Z,1510148713.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:13.805Z,1510148713.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:13.838Z,1510148713.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:14.233Z,1510148714.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:14.249Z,1510148714.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:14.633Z,1510148714.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:14.648Z,1510148714.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:15.018Z,1510148715.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:15.050Z,1510148715.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:15.412Z,1510148715.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:15.436Z,1510148715.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:15.808Z,1510148715.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:15.824Z,1510148715.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:16.244Z,1510148716.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:16.261Z,1510148716.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:16.625Z,1510148716.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:16.659Z,1510148716.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:17.298Z,1510148717.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:17.318Z,1510148717.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:17.425Z,1510148717.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:17.464Z,1510148717.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:17.847Z,1510148717.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:17.865Z,1510148717.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:18.251Z,1510148718.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:18.268Z,1510148718.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:18.649Z,1510148718.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:18.666Z,1510148718.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:19.037Z,1510148719.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:19.053Z,1510148719.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:19.437Z,1510148719.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:19.459Z,1510148719.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:19.835Z,1510148719.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:19.857Z,1510148719.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:20.254Z,1510148720.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:20.270Z,1510148720.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:20.638Z,1510148720.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:20.654Z,1510148720.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:21.051Z,1510148721.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:21.072Z,1510148721.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:21.734Z,1510148721.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:21.808Z,1510148721.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:21.922Z,1510148721.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:21.973Z,1510148721.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:22.348Z,1510148722.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:22.364Z,1510148722.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:22.748Z,1510148722.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:22.807Z,1510148722.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:23.149Z,1510148723.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:23.165Z,1510148723.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:23.529Z,1510148723.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:23.584Z,1510148723.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:23.928Z,1510148723.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:23.958Z,1510148723.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:24.359Z,1510148724.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:24.376Z,1510148724.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:24.742Z,1510148724.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:24.764Z,1510148724.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:25.425Z,1510148725.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:25.453Z,1510148725.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:25.566Z,1510148725.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:25.618Z,1510148725.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:25.992Z,1510148725.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:26.016Z,1510148726.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:26.381Z,1510148726.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:26.406Z,1510148726.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:26.785Z,1510148726.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:26.825Z,1510148726.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:27.172Z,1510148727.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:27.201Z,1510148727.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:27.573Z,1510148727.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:27.588Z,1510148727.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:27.999Z,1510148727.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:28.016Z,1510148728.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:28.374Z,1510148728.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:28.390Z,1510148728.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:28.775Z,1510148728.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:28.791Z,1510148728.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:29.182Z,1510148729.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:29.207Z,1510148729.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:29.869Z,1510148729.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:29.885Z,1510148729.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:29.985Z,1510148729.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:30.027Z,1510148730.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:30.414Z,1510148730.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:30.430Z,1510148730.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:30.805Z,1510148730.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:30.829Z,1510148730.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:31.205Z,1510148731.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:31.221Z,1510148731.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:31.592Z,1510148731.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:31.658Z,1510148731.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:32.019Z,1510148732.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:32.036Z,1510148732.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:32.407Z,1510148732.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:32.425Z,1510148732.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:33.081Z,1510148733.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:33.117Z,1510148733.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:33.227Z,1510148733.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:33.275Z,1510148733.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:33.643Z,1510148733.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:33.676Z,1510148733.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:34.046Z,1510148734.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:34.079Z,1510148734.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:34.442Z,1510148734.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:34.470Z,1510148734.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:34.831Z,1510148734.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:34.849Z,1510148734.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:35.231Z,1510148735.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:35.252Z,1510148735.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:35.635Z,1510148735.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:35.656Z,1510148735.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:36.058Z,1510148736.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:36.082Z,1510148736.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:36.434Z,1510148736.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:36.455Z,1510148736.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:36.840Z,1510148736.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:36.857Z,1510148736.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:37.534Z,1510148737.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:37.550Z,1510148737.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:37.649Z,1510148737.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:37.695Z,1510148737.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:38.072Z,1510148738.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:38.089Z,1510148738.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:38.475Z,1510148738.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:38.492Z,1510148738.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:38.875Z,1510148738.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:38.897Z,1510148738.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:39.255Z,1510148739.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:39.291Z,1510148739.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:39.656Z,1510148739.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:39.689Z,1510148739.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:40.084Z,1510148740.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:40.110Z,1510148740.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:40.475Z,1510148740.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:40.496Z,1510148740.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:41.154Z,1510148741.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:41.182Z,1510148741.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:41.299Z,1510148741.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:41.342Z,1510148741.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:41.715Z,1510148741.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:41.731Z,1510148741.731 [PNI_TCM](ERROR): CRC does not match. Expected:0x42526 got:0x16246
2017-11-08T13:45:41.759Z,1510148741.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:42.112Z,1510148742.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:42.140Z,1510148742.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:42.514Z,1510148742.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:42.545Z,1510148742.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:42.899Z,1510148742.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:42.940Z,1510148742.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:43.301Z,1510148743.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:43.309Z,1510148743.309 [PNI_TCM](ERROR): CRC does not match. Expected:0x20281 got:0x49705
2017-11-08T13:45:43.337Z,1510148743.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:43.702Z,1510148743.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:43.760Z,1510148743.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:44.131Z,1510148744.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:44.172Z,1510148744.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:44.501Z,1510148744.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:44.540Z,1510148744.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:44.915Z,1510148744.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:44.922Z,1510148744.922 [PNI_TCM](ERROR): CRC does not match. Expected:0x54904 got:0x51229
2017-11-08T13:45:44.976Z,1510148744.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:45.599Z,1510148745.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:45.614Z,1510148745.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:45.713Z,1510148745.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:45.777Z,1510148745.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:46.140Z,1510148746.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:46.147Z,1510148746.147 [PNI_TCM](ERROR): CRC does not match. Expected:0x15391 got:0x1857
2017-11-08T13:45:46.177Z,1510148746.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:46.538Z,1510148746.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:46.554Z,1510148746.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:46.936Z,1510148746.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:46.952Z,1510148746.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:47.322Z,1510148747.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:47.354Z,1510148747.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:47.722Z,1510148747.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:47.753Z,1510148747.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:48.150Z,1510148748.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:48.166Z,1510148748.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:48.543Z,1510148748.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:48.563Z,1510148748.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:49.214Z,1510148749.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:49.249Z,1510148749.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:49.361Z,1510148749.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:49.377Z,1510148749.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:49.782Z,1510148749.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:49.816Z,1510148749.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:50.182Z,1510148750.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:50.212Z,1510148750.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:50.578Z,1510148750.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:50.604Z,1510148750.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:50.967Z,1510148750.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:50.984Z,1510148750.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:51.363Z,1510148751.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:51.380Z,1510148751.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:51.764Z,1510148751.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:51.781Z,1510148751.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:52.199Z,1510148752.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:52.230Z,1510148752.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:52.567Z,1510148752.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:52.612Z,1510148752.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:52.981Z,1510148752.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:53.017Z,1510148753.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:53.666Z,1510148753.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:53.682Z,1510148753.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:53.789Z,1510148753.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:53.857Z,1510148753.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:54.216Z,1510148754.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:54.232Z,1510148754.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:54.617Z,1510148754.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:54.632Z,1510148754.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:55.016Z,1510148755.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:55.032Z,1510148755.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:55.406Z,1510148755.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:55.422Z,1510148755.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:55.807Z,1510148755.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:55.823Z,1510148755.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:56.222Z,1510148756.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:56.243Z,1510148756.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:56.617Z,1510148756.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:56.633Z,1510148756.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:57.317Z,1510148757.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:57.333Z,1510148757.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:57.429Z,1510148757.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:57.474Z,1510148757.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:57.852Z,1510148757.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:57.868Z,1510148757.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:58.256Z,1510148758.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:58.272Z,1510148758.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:58.642Z,1510148758.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:58.668Z,1510148758.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:59.035Z,1510148759.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:59.070Z,1510148759.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:59.431Z,1510148759.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:59.468Z,1510148759.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:45:59.836Z,1510148759.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:45:59.871Z,1510148759.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:00.263Z,1510148760.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:00.279Z,1510148760.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:00.635Z,1510148760.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:00.671Z,1510148760.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:01.055Z,1510148761.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:01.075Z,1510148761.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:01.735Z,1510148761.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:01.762Z,1510148761.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:01.871Z,1510148761.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:01.910Z,1510148761.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:02.282Z,1510148762.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:02.314Z,1510148762.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:02.680Z,1510148762.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:02.696Z,1510148762.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:03.081Z,1510148763.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:03.098Z,1510148763.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:03.473Z,1510148763.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:03.489Z,1510148763.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:03.870Z,1510148763.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:03.891Z,1510148763.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:04.293Z,1510148764.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:04.323Z,1510148764.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:04.681Z,1510148764.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:04.703Z,1510148764.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:05.367Z,1510148765.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:05.392Z,1510148765.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:05.497Z,1510148765.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:05.548Z,1510148765.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:05.920Z,1510148765.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:05.980Z,1510148765.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:06.312Z,1510148766.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:06.337Z,1510148766.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:06.721Z,1510148766.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:06.737Z,1510148766.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:07.103Z,1510148767.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:07.151Z,1510148767.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:07.503Z,1510148767.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:07.538Z,1510148767.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:07.900Z,1510148767.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:07.947Z,1510148767.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:08.334Z,1510148768.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:08.352Z,1510148768.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:08.699Z,1510148768.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:08.733Z,1510148768.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:09.124Z,1510148769.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:09.140Z,1510148769.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:09.801Z,1510148769.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:09.830Z,1510148769.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:09.942Z,1510148769.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:09.991Z,1510148769.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:10.362Z,1510148770.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:10.389Z,1510148770.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:10.757Z,1510148770.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:10.790Z,1510148770.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:11.157Z,1510148771.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:11.190Z,1510148771.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:11.548Z,1510148771.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:11.564Z,1510148771.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:11.976Z,1510148771.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:11.992Z,1510148771.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:12.357Z,1510148772.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:12.381Z,1510148772.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:13.041Z,1510148773.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:13.057Z,1510148773.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:13.157Z,1510148773.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:13.203Z,1510148773.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:13.580Z,1510148773.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:13.596Z,1510148773.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:13.984Z,1510148773.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:13.999Z,1510148773.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:14.370Z,1510148774.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:14.396Z,1510148774.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:14.763Z,1510148774.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:14.794Z,1510148774.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:15.163Z,1510148775.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:15.194Z,1510148775.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:15.560Z,1510148775.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:15.592Z,1510148775.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:15.991Z,1510148775.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:16.051Z,1510148776.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:16.363Z,1510148776.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:16.399Z,1510148776.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:16.776Z,1510148776.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:16.802Z,1510148776.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:17.466Z,1510148777.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:17.498Z,1510148777.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:17.611Z,1510148777.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:17.655Z,1510148777.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:18.022Z,1510148778.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:18.052Z,1510148778.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:18.417Z,1510148778.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:18.454Z,1510148778.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:18.821Z,1510148778.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:18.853Z,1510148778.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:19.211Z,1510148779.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:19.227Z,1510148779.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:19.610Z,1510148779.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:19.626Z,1510148779.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:20.039Z,1510148780.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:20.056Z,1510148780.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:20.422Z,1510148780.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:20.453Z,1510148780.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:21.144Z,1510148781.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:21.167Z,1510148781.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:21.269Z,1510148781.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:21.315Z,1510148781.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:21.692Z,1510148781.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:21.712Z,1510148781.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:22.095Z,1510148782.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:22.111Z,1510148782.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:22.493Z,1510148782.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:22.529Z,1510148782.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:22.875Z,1510148782.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:22.908Z,1510148782.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:23.271Z,1510148783.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:23.309Z,1510148783.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:23.672Z,1510148783.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:23.709Z,1510148783.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:24.107Z,1510148784.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:24.128Z,1510148784.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:24.475Z,1510148784.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:24.509Z,1510148784.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:24.889Z,1510148784.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:24.930Z,1510148784.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:25.574Z,1510148785.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:25.612Z,1510148785.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:25.726Z,1510148785.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:25.758Z,1510148785.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:26.138Z,1510148786.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:26.181Z,1510148786.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:26.534Z,1510148786.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:26.566Z,1510148786.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:26.929Z,1510148786.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:26.966Z,1510148786.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:27.326Z,1510148787.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:27.342Z,1510148787.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:27.726Z,1510148787.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:27.791Z,1510148787.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:28.145Z,1510148788.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:28.195Z,1510148788.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:28.536Z,1510148788.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:28.553Z,1510148788.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:30.096Z,1510148790.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:30.136Z,1510148790.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:30.242Z,1510148790.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:30.293Z,1510148790.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:30.662Z,1510148790.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:30.723Z,1510148790.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:31.068Z,1510148791.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:31.088Z,1510148791.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:31.465Z,1510148791.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:31.481Z,1510148791.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:31.847Z,1510148791.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:31.881Z,1510148791.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:32.247Z,1510148792.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:32.282Z,1510148792.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:32.648Z,1510148792.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:32.680Z,1510148792.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:33.076Z,1510148793.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:33.092Z,1510148793.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:33.457Z,1510148793.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:33.488Z,1510148793.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:34.131Z,1510148794.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:34.147Z,1510148794.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:34.259Z,1510148794.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:34.308Z,1510148794.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:34.675Z,1510148794.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:34.692Z,1510148794.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:35.080Z,1510148795.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:35.097Z,1510148795.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:35.479Z,1510148795.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:35.495Z,1510148795.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:35.859Z,1510148795.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:35.883Z,1510148795.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:36.259Z,1510148796.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:36.294Z,1510148796.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:36.660Z,1510148796.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:36.691Z,1510148796.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:37.086Z,1510148797.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:37.107Z,1510148797.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:37.459Z,1510148797.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:37.493Z,1510148797.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:37.879Z,1510148797.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:37.895Z,1510148797.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:38.545Z,1510148798.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:38.561Z,1510148798.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:38.697Z,1510148798.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:38.759Z,1510148798.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:39.118Z,1510148799.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:39.139Z,1510148799.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:39.523Z,1510148799.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:39.539Z,1510148799.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:39.924Z,1510148799.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:39.940Z,1510148799.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:40.303Z,1510148800.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:40.332Z,1510148800.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:40.700Z,1510148800.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:40.716Z,1510148800.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:41.136Z,1510148801.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:41.152Z,1510148801.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:41.517Z,1510148801.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:41.548Z,1510148801.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:42.213Z,1510148802.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:42.236Z,1510148802.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:42.350Z,1510148802.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:42.400Z,1510148802.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:42.776Z,1510148802.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:42.793Z,1510148802.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:43.165Z,1510148803.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:43.191Z,1510148803.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:43.565Z,1510148803.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:43.592Z,1510148803.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:43.955Z,1510148803.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:43.984Z,1510148803.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:44.355Z,1510148804.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:44.371Z,1510148804.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:44.756Z,1510148804.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:44.772Z,1510148804.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:45.184Z,1510148805.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:45.202Z,1510148805.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:45.551Z,1510148805.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:45.567Z,1510148805.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:45.969Z,1510148805.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:45.997Z,1510148805.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:46.654Z,1510148806.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:46.670Z,1510148806.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:46.800Z,1510148806.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:46.843Z,1510148806.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:47.210Z,1510148807.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:47.249Z,1510148807.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:47.605Z,1510148807.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:47.646Z,1510148807.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:48.010Z,1510148808.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:48.046Z,1510148808.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:48.396Z,1510148808.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:48.424Z,1510148808.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:48.788Z,1510148808.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:48.814Z,1510148808.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:49.214Z,1510148809.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:49.236Z,1510148809.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:49.613Z,1510148809.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:49.635Z,1510148809.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:50.290Z,1510148810.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:50.316Z,1510148810.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:50.454Z,1510148810.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:50.487Z,1510148810.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:50.863Z,1510148810.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:50.961Z,1510148810.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:51.263Z,1510148811.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:51.280Z,1510148811.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:51.660Z,1510148811.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:51.678Z,1510148811.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:52.044Z,1510148812.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:52.088Z,1510148812.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:52.443Z,1510148812.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:52.474Z,1510148812.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:52.844Z,1510148812.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:52.892Z,1510148812.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:53.275Z,1510148813.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:53.291Z,1510148813.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:53.639Z,1510148813.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:53.674Z,1510148813.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:54.063Z,1510148814.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:54.080Z,1510148814.080 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:54.080Z,1510148814.080 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2017-11-08T13:46:54.080Z,1510148814.080 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T13:46:54.082Z,1510148814.082 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:54.082Z,1510148814.082 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2017-11-08T13:46:54.082Z,1510148814.082 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T13:46:54.084Z,1510148814.084 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:54.085Z,1510148814.085 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-11-08T13:46:54.085Z,1510148814.085 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T13:46:54.170Z,1510148814.170 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T13:46:54.170Z,1510148814.170 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T13:46:54.170Z,1510148814.170 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T13:46:54.733Z,1510148814.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:54.845Z,1510148814.845 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T13:46:54.845Z,1510148814.845 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2017-11-08T13:46:54.845Z,1510148814.845 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T13:46:54.845Z,1510148814.845 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2017-11-08T13:46:54.846Z,1510148814.846 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T13:46:54.846Z,1510148814.846 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-11-08T13:46:54.891Z,1510148814.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:54.920Z,1510148814.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T13:46:54.921Z,1510148814.921 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:46:54.921Z,1510148814.921 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:46:54.921Z,1510148814.921 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T13:46:54.922Z,1510148814.922 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:46:54.922Z,1510148814.922 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:46:54.923Z,1510148814.923 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T13:46:54.923Z,1510148814.923 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:46:54.923Z,1510148814.923 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:46:55.282Z,1510148815.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:55.319Z,1510148815.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T13:46:55.320Z,1510148815.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:55.692Z,1510148815.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:55.708Z,1510148815.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T13:46:55.709Z,1510148815.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:56.091Z,1510148816.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:56.133Z,1510148816.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2017-11-08T13:46:56.134Z,1510148816.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:56.479Z,1510148816.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:56.504Z,1510148816.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T13:46:56.510Z,1510148816.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:56.872Z,1510148816.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:56.909Z,1510148816.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T13:46:56.910Z,1510148816.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:57.299Z,1510148817.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:57.315Z,1510148817.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T13:46:57.316Z,1510148817.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:57.695Z,1510148817.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:57.739Z,1510148817.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2017-11-08T13:46:57.740Z,1510148817.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:58.365Z,1510148818.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:58.387Z,1510148818.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2017-11-08T13:46:58.388Z,1510148818.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:58.503Z,1510148818.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:58.519Z,1510148818.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T13:46:58.520Z,1510148818.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:58.926Z,1510148818.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:58.960Z,1510148818.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-08T13:46:58.961Z,1510148818.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:59.319Z,1510148819.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:59.348Z,1510148819.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-08T13:46:59.349Z,1510148819.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:46:59.719Z,1510148819.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:46:59.747Z,1510148819.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-08T13:46:59.748Z,1510148819.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:00.114Z,1510148820.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:00.130Z,1510148820.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-08T13:47:00.130Z,1510148820.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:00.512Z,1510148820.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:00.527Z,1510148820.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T13:47:00.528Z,1510148820.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:00.907Z,1510148820.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:00.972Z,1510148820.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T13:47:00.973Z,1510148820.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:01.334Z,1510148821.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:01.347Z,1510148821.347 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-11-08T13:47:01.375Z,1510148821.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-08T13:47:01.377Z,1510148821.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:01.712Z,1510148821.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:01.728Z,1510148821.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T13:47:01.729Z,1510148821.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:02.130Z,1510148822.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:02.154Z,1510148822.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T13:47:02.155Z,1510148822.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:02.810Z,1510148822.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:02.831Z,1510148822.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T13:47:02.832Z,1510148822.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:02.963Z,1510148822.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:02.979Z,1510148822.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T13:47:02.980Z,1510148822.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:03.370Z,1510148823.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:03.403Z,1510148823.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T13:47:03.404Z,1510148823.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:03.774Z,1510148823.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:03.812Z,1510148823.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T13:47:03.813Z,1510148823.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:04.174Z,1510148824.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:04.206Z,1510148824.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T13:47:04.207Z,1510148824.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:04.563Z,1510148824.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:04.583Z,1510148824.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T13:47:04.584Z,1510148824.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:04.986Z,1510148824.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:05.009Z,1510148825.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T13:47:05.010Z,1510148825.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:05.370Z,1510148825.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:05.385Z,1510148825.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T13:47:05.386Z,1510148825.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:06.056Z,1510148826.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:06.071Z,1510148826.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T13:47:06.072Z,1510148826.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:06.173Z,1510148826.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:06.189Z,1510148826.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T13:47:06.190Z,1510148826.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:06.589Z,1510148826.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:06.622Z,1510148826.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T13:47:06.623Z,1510148826.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:06.989Z,1510148826.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:07.016Z,1510148827.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T13:47:07.017Z,1510148827.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:07.389Z,1510148827.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:07.418Z,1510148827.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T13:47:07.419Z,1510148827.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:07.780Z,1510148827.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:07.795Z,1510148827.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T13:47:07.796Z,1510148827.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:08.180Z,1510148828.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:08.196Z,1510148828.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T13:47:08.213Z,1510148828.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:08.580Z,1510148828.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:08.596Z,1510148828.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T13:47:08.597Z,1510148828.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:09.016Z,1510148829.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:09.032Z,1510148829.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2017-11-08T13:47:09.033Z,1510148829.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:09.383Z,1510148829.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:09.399Z,1510148829.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T13:47:09.400Z,1510148829.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:09.789Z,1510148829.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:09.805Z,1510148829.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T13:47:09.806Z,1510148829.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:10.471Z,1510148830.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:10.491Z,1510148830.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T13:47:10.492Z,1510148830.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:10.599Z,1510148830.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:10.634Z,1510148830.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-08T13:47:10.635Z,1510148830.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:11.016Z,1510148831.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:11.039Z,1510148831.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-11-08T13:47:11.040Z,1510148831.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:11.421Z,1510148831.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:11.443Z,1510148831.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-08T13:47:11.444Z,1510148831.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:11.816Z,1510148831.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:11.832Z,1510148831.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-08T13:47:11.833Z,1510148831.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:12.199Z,1510148832.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:12.230Z,1510148832.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-08T13:47:12.231Z,1510148832.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:12.596Z,1510148832.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:12.630Z,1510148832.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-08T13:47:12.631Z,1510148832.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:13.031Z,1510148833.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:13.115Z,1510148833.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-08T13:47:13.116Z,1510148833.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:13.412Z,1510148833.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:13.447Z,1510148833.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-08T13:47:13.447Z,1510148833.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:14.085Z,1510148834.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:14.130Z,1510148834.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:14.242Z,1510148834.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:14.259Z,1510148834.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:14.662Z,1510148834.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:14.732Z,1510148834.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:15.061Z,1510148835.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:15.095Z,1510148835.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:15.458Z,1510148835.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:15.490Z,1510148835.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:15.847Z,1510148835.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:15.867Z,1510148835.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:16.251Z,1510148836.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:16.267Z,1510148836.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:16.651Z,1510148836.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:16.668Z,1510148836.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:17.074Z,1510148837.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:17.097Z,1510148837.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:17.450Z,1510148837.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:17.465Z,1510148837.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:17.857Z,1510148837.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:17.899Z,1510148837.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:18.540Z,1510148838.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:18.563Z,1510148838.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:18.669Z,1510148838.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:18.703Z,1510148838.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:19.091Z,1510148839.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:19.107Z,1510148839.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:19.495Z,1510148839.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:19.511Z,1510148839.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:19.892Z,1510148839.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:19.908Z,1510148839.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:20.275Z,1510148840.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:20.308Z,1510148840.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:20.676Z,1510148840.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:20.703Z,1510148840.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:21.108Z,1510148841.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:21.124Z,1510148841.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:21.496Z,1510148841.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:21.520Z,1510148841.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:22.161Z,1510148842.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:22.177Z,1510148842.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:22.308Z,1510148842.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:22.351Z,1510148842.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:22.718Z,1510148842.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:22.771Z,1510148842.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:23.117Z,1510148843.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:23.156Z,1510148843.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:23.517Z,1510148843.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:23.534Z,1510148843.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:23.908Z,1510148843.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:23.928Z,1510148843.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:24.308Z,1510148844.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:24.323Z,1510148844.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:24.710Z,1510148844.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:24.726Z,1510148844.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:25.126Z,1510148845.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:25.154Z,1510148845.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:25.508Z,1510148845.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:25.524Z,1510148845.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:25.917Z,1510148845.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:25.934Z,1510148845.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:26.596Z,1510148846.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:26.619Z,1510148846.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:26.725Z,1510148846.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:26.767Z,1510148846.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:27.152Z,1510148847.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:27.168Z,1510148847.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:27.547Z,1510148847.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:27.563Z,1510148847.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:27.947Z,1510148847.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:27.964Z,1510148847.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:28.332Z,1510148848.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:28.357Z,1510148848.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:28.732Z,1510148848.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:28.765Z,1510148848.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:29.158Z,1510148849.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:29.174Z,1510148849.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:29.549Z,1510148849.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:29.568Z,1510148849.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:30.234Z,1510148850.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:30.260Z,1510148850.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:30.379Z,1510148850.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:30.419Z,1510148850.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:30.801Z,1510148850.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:30.817Z,1510148850.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:31.198Z,1510148851.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:31.219Z,1510148851.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:31.590Z,1510148851.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:31.620Z,1510148851.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:31.979Z,1510148851.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:32.014Z,1510148852.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:32.379Z,1510148852.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:32.414Z,1510148852.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:32.779Z,1510148852.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:32.814Z,1510148852.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:33.212Z,1510148853.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:33.231Z,1510148853.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:33.579Z,1510148853.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:33.614Z,1510148853.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:34.000Z,1510148854.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:34.017Z,1510148854.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:34.674Z,1510148854.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:34.750Z,1510148854.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:34.864Z,1510148854.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:34.918Z,1510148854.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:35.278Z,1510148855.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:35.304Z,1510148855.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:35.681Z,1510148855.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:35.725Z,1510148855.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:36.078Z,1510148856.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:36.100Z,1510148856.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:36.473Z,1510148856.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:36.527Z,1510148856.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:36.874Z,1510148856.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:36.890Z,1510148856.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:37.292Z,1510148857.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:37.324Z,1510148857.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:37.681Z,1510148857.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:37.726Z,1510148857.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:38.361Z,1510148858.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:38.376Z,1510148858.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:38.486Z,1510148858.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:38.534Z,1510148858.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:38.903Z,1510148858.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:38.935Z,1510148858.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:39.301Z,1510148859.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:39.341Z,1510148859.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:39.702Z,1510148859.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:39.717Z,1510148859.717 [PNI_TCM](ERROR): CRC does not match. Expected:0x5284 got:0x30633
2017-11-08T13:47:39.737Z,1510148859.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:40.091Z,1510148860.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:40.128Z,1510148860.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:40.493Z,1510148860.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:40.500Z,1510148860.500 [PNI_TCM](ERROR): CRC does not match. Expected:0x1152 got:0x30749
2017-11-08T13:47:40.527Z,1510148860.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:40.888Z,1510148860.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:40.928Z,1510148860.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:41.323Z,1510148861.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:41.339Z,1510148861.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:41.687Z,1510148861.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:41.722Z,1510148861.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:42.114Z,1510148862.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:42.120Z,1510148862.120 [PNI_TCM](ERROR): CRC does not match. Expected:0x43647 got:0x17048
2017-11-08T13:47:42.147Z,1510148862.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:42.794Z,1510148862.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:42.822Z,1510148862.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:42.936Z,1510148862.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:42.952Z,1510148862.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:43.353Z,1510148863.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:43.381Z,1510148863.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:43.753Z,1510148863.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:43.781Z,1510148863.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:44.169Z,1510148864.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:44.185Z,1510148864.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:44.544Z,1510148864.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:44.596Z,1510148864.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:44.976Z,1510148864.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:44.992Z,1510148864.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:45.357Z,1510148865.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:45.389Z,1510148865.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:46.042Z,1510148866.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:46.081Z,1510148866.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:46.195Z,1510148866.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:46.235Z,1510148866.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:46.620Z,1510148866.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:46.637Z,1510148866.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:47.018Z,1510148867.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:47.035Z,1510148867.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:47.416Z,1510148867.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:47.433Z,1510148867.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:47.800Z,1510148867.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:47.830Z,1510148867.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:48.199Z,1510148868.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:48.230Z,1510148868.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:48.600Z,1510148868.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:48.631Z,1510148868.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:49.031Z,1510148869.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:49.047Z,1510148869.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:49.399Z,1510148869.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:49.430Z,1510148869.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:49.817Z,1510148869.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:49.859Z,1510148869.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:50.485Z,1510148870.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:50.501Z,1510148870.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:50.631Z,1510148870.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:50.648Z,1510148870.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:51.038Z,1510148871.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:51.054Z,1510148871.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:51.442Z,1510148871.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:51.457Z,1510148871.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:51.838Z,1510148871.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:51.854Z,1510148871.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:52.233Z,1510148872.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:52.249Z,1510148872.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:52.634Z,1510148872.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:52.650Z,1510148872.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:53.050Z,1510148873.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:53.082Z,1510148873.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:53.441Z,1510148873.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:53.458Z,1510148873.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:54.118Z,1510148874.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:54.134Z,1510148874.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:54.255Z,1510148874.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:54.291Z,1510148874.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:54.672Z,1510148874.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:54.689Z,1510148874.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:55.076Z,1510148875.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:55.095Z,1510148875.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:55.475Z,1510148875.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:55.492Z,1510148875.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:55.855Z,1510148875.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:55.884Z,1510148875.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:56.255Z,1510148876.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:56.313Z,1510148876.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:56.656Z,1510148876.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:56.688Z,1510148876.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:57.087Z,1510148877.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:57.147Z,1510148877.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:57.459Z,1510148877.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:57.496Z,1510148877.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:57.869Z,1510148877.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:57.935Z,1510148877.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:58.554Z,1510148878.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:58.592Z,1510148878.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:58.702Z,1510148878.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:58.752Z,1510148878.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:59.118Z,1510148879.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:59.147Z,1510148879.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:59.525Z,1510148879.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:59.559Z,1510148879.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:47:59.917Z,1510148879.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:47:59.942Z,1510148879.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:00.310Z,1510148880.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:00.326Z,1510148880.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:00.706Z,1510148880.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:00.727Z,1510148880.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:01.133Z,1510148881.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:01.158Z,1510148881.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:01.521Z,1510148881.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:01.558Z,1510148881.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:02.200Z,1510148882.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:02.216Z,1510148882.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:02.337Z,1510148882.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:02.379Z,1510148882.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:02.759Z,1510148882.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:02.776Z,1510148882.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:03.162Z,1510148883.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:03.177Z,1510148883.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:03.560Z,1510148883.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:03.576Z,1510148883.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:03.949Z,1510148883.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:03.966Z,1510148883.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:04.347Z,1510148884.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:04.373Z,1510148884.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:04.739Z,1510148884.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:04.765Z,1510148884.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:05.173Z,1510148885.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:05.207Z,1510148885.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:05.543Z,1510148885.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:05.567Z,1510148885.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:05.960Z,1510148885.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:06.019Z,1510148886.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:06.642Z,1510148886.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:06.667Z,1510148886.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:06.779Z,1510148886.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:06.819Z,1510148886.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:07.201Z,1510148887.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:07.217Z,1510148887.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:07.600Z,1510148887.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:07.617Z,1510148887.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:07.985Z,1510148887.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:08.016Z,1510148888.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:08.379Z,1510148888.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:08.420Z,1510148888.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:08.780Z,1510148888.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:08.796Z,1510148888.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:09.208Z,1510148889.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:09.225Z,1510148889.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:09.593Z,1510148889.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:09.621Z,1510148889.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:10.274Z,1510148890.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:10.290Z,1510148890.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:10.392Z,1510148890.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:10.426Z,1510148890.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:10.820Z,1510148890.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:10.839Z,1510148890.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:11.216Z,1510148891.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:11.233Z,1510148891.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:11.615Z,1510148891.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:11.631Z,1510148891.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:11.999Z,1510148891.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:12.027Z,1510148892.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:12.395Z,1510148892.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:12.420Z,1510148892.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:12.800Z,1510148892.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:12.825Z,1510148892.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:13.228Z,1510148893.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:13.244Z,1510148893.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:13.599Z,1510148893.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:13.634Z,1510148893.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:14.010Z,1510148894.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:14.093Z,1510148894.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:14.842Z,1510148894.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:14.858Z,1510148894.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:14.998Z,1510148894.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:15.026Z,1510148895.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:15.407Z,1510148895.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:15.435Z,1510148895.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:15.807Z,1510148895.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:15.844Z,1510148895.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:16.214Z,1510148896.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:16.238Z,1510148896.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:16.596Z,1510148896.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:16.663Z,1510148896.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:16.995Z,1510148896.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:17.012Z,1510148897.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:17.395Z,1510148897.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:17.412Z,1510148897.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:17.800Z,1510148897.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:17.863Z,1510148897.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:18.221Z,1510148898.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:18.251Z,1510148898.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:18.610Z,1510148898.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:18.627Z,1510148898.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:19.288Z,1510148899.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:19.352Z,1510148899.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:19.470Z,1510148899.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:19.505Z,1510148899.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:19.888Z,1510148899.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:19.951Z,1510148899.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:20.289Z,1510148900.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:20.304Z,1510148900.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:20.677Z,1510148900.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:20.706Z,1510148900.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:21.068Z,1510148901.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:21.101Z,1510148901.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:21.472Z,1510148901.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:21.488Z,1510148901.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:21.865Z,1510148901.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:21.882Z,1510148901.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:22.294Z,1510148902.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:22.316Z,1510148902.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:22.664Z,1510148902.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:22.681Z,1510148902.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:23.078Z,1510148903.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:23.119Z,1510148903.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:23.774Z,1510148903.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:23.791Z,1510148903.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:23.921Z,1510148903.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:23.967Z,1510148903.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:24.338Z,1510148904.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:24.367Z,1510148904.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:24.734Z,1510148904.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:24.764Z,1510148904.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:25.130Z,1510148905.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:25.156Z,1510148905.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:25.526Z,1510148905.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:25.542Z,1510148905.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:25.918Z,1510148905.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:25.935Z,1510148905.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:26.357Z,1510148906.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:26.373Z,1510148906.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:26.734Z,1510148906.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:26.768Z,1510148906.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:27.426Z,1510148907.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:27.442Z,1510148907.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:27.575Z,1510148907.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:27.622Z,1510148907.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:28.004Z,1510148908.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:28.057Z,1510148908.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:28.404Z,1510148908.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:28.420Z,1510148908.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:28.790Z,1510148908.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:28.822Z,1510148908.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:29.183Z,1510148909.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:29.219Z,1510148909.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:29.588Z,1510148909.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:29.614Z,1510148909.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:30.015Z,1510148910.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:30.110Z,1510148910.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:30.384Z,1510148910.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:30.415Z,1510148910.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:30.783Z,1510148910.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:30.819Z,1510148910.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:31.205Z,1510148911.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:31.221Z,1510148911.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:31.869Z,1510148911.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:31.885Z,1510148911.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:32.024Z,1510148912.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:32.067Z,1510148912.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:32.434Z,1510148912.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:32.465Z,1510148912.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:32.837Z,1510148912.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:32.864Z,1510148912.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:33.234Z,1510148913.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:33.267Z,1510148913.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:33.620Z,1510148913.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:33.636Z,1510148913.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:34.023Z,1510148914.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:34.040Z,1510148914.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:34.423Z,1510148914.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:34.440Z,1510148914.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:34.824Z,1510148914.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:34.844Z,1510148914.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:35.258Z,1510148915.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:35.274Z,1510148915.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:35.638Z,1510148915.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:35.673Z,1510148915.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:36.318Z,1510148916.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:36.334Z,1510148916.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:36.443Z,1510148916.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:36.495Z,1510148916.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:36.864Z,1510148916.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:36.881Z,1510148916.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:37.268Z,1510148917.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:37.284Z,1510148917.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:37.666Z,1510148917.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:37.683Z,1510148917.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:38.045Z,1510148918.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:38.078Z,1510148918.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:38.444Z,1510148918.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:38.491Z,1510148918.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:38.845Z,1510148918.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:38.862Z,1510148918.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:39.277Z,1510148919.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:39.303Z,1510148919.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:39.648Z,1510148919.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:39.664Z,1510148919.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:40.062Z,1510148920.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:40.131Z,1510148920.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:40.742Z,1510148920.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:40.763Z,1510148920.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:40.903Z,1510148920.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:40.959Z,1510148920.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:41.308Z,1510148921.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:41.340Z,1510148921.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:41.702Z,1510148921.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:41.763Z,1510148921.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:42.106Z,1510148922.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:42.137Z,1510148922.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:42.497Z,1510148922.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:42.515Z,1510148922.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:42.897Z,1510148922.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:42.913Z,1510148922.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:43.319Z,1510148923.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:43.345Z,1510148923.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:43.709Z,1510148923.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:43.746Z,1510148923.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:44.387Z,1510148924.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:44.403Z,1510148924.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:44.506Z,1510148924.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:44.522Z,1510148924.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:44.924Z,1510148924.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:44.956Z,1510148924.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:45.324Z,1510148925.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:45.350Z,1510148925.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:45.719Z,1510148925.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:45.756Z,1510148925.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:46.110Z,1510148926.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:46.127Z,1510148926.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:46.506Z,1510148926.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:46.550Z,1510148926.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:46.909Z,1510148926.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:46.917Z,1510148926.917 [PNI_TCM](ERROR): CRC does not match. Expected:0x43647 got:0x17048
2017-11-08T13:48:46.959Z,1510148926.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:47.330Z,1510148927.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:47.356Z,1510148927.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:47.710Z,1510148927.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:47.727Z,1510148927.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:48.124Z,1510148928.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:48.157Z,1510148928.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:49.199Z,1510148929.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:49.215Z,1510148929.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:49.325Z,1510148929.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:49.364Z,1510148929.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:49.751Z,1510148929.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:49.815Z,1510148929.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:50.157Z,1510148930.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:50.175Z,1510148930.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:50.543Z,1510148930.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:50.582Z,1510148930.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:50.931Z,1510148930.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:50.968Z,1510148930.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:51.334Z,1510148931.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:51.376Z,1510148931.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:51.732Z,1510148931.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:51.765Z,1510148931.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:52.161Z,1510148932.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:52.179Z,1510148932.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:52.541Z,1510148932.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:52.566Z,1510148932.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:53.430Z,1510148933.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:53.446Z,1510148933.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:53.556Z,1510148933.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:53.603Z,1510148933.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:53.975Z,1510148933.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:53.996Z,1510148933.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:54.370Z,1510148934.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:54.386Z,1510148934.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:54.776Z,1510148934.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:54.791Z,1510148934.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:55.156Z,1510148935.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:55.181Z,1510148935.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:55.556Z,1510148935.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:55.581Z,1510148935.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:55.980Z,1510148935.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:55.996Z,1510148935.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:56.356Z,1510148936.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:56.381Z,1510148936.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:56.771Z,1510148936.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:56.788Z,1510148936.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:57.447Z,1510148937.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:57.476Z,1510148937.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:57.591Z,1510148937.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:57.635Z,1510148937.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:58.012Z,1510148938.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:58.045Z,1510148938.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:58.400Z,1510148938.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:58.431Z,1510148938.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:58.812Z,1510148938.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:58.828Z,1510148938.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:59.191Z,1510148939.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:59.226Z,1510148939.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:48:59.592Z,1510148939.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:48:59.627Z,1510148939.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:00.023Z,1510148940.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:00.040Z,1510148940.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:00.413Z,1510148940.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:00.429Z,1510148940.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:01.076Z,1510148941.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:01.139Z,1510148941.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:01.251Z,1510148941.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:01.299Z,1510148941.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:01.668Z,1510148941.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:01.684Z,1510148941.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:02.068Z,1510148942.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:02.129Z,1510148942.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:02.472Z,1510148942.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:02.488Z,1510148942.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:02.851Z,1510148942.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:02.877Z,1510148942.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:03.251Z,1510148943.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:03.304Z,1510148943.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:03.653Z,1510148943.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:03.678Z,1510148943.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:04.078Z,1510148944.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:04.143Z,1510148944.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:04.451Z,1510148944.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:04.476Z,1510148944.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:04.871Z,1510148944.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:04.887Z,1510148944.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:05.550Z,1510148945.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:05.571Z,1510148945.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:05.684Z,1510148945.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:05.736Z,1510148945.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:06.107Z,1510148946.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:06.143Z,1510148946.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:06.503Z,1510148946.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:06.528Z,1510148946.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:06.903Z,1510148946.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:06.937Z,1510148946.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:07.291Z,1510148947.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:07.339Z,1510148947.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:07.692Z,1510148947.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:07.730Z,1510148947.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:08.120Z,1510148948.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:08.136Z,1510148948.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:08.506Z,1510148948.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:08.532Z,1510148948.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:09.180Z,1510148949.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:09.196Z,1510148949.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:09.297Z,1510148949.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:09.347Z,1510148949.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:09.722Z,1510148949.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:09.733Z,1510148949.733 [PNI_TCM](ERROR): CRC does not match. Expected:0x14327 got:0x38932
2017-11-08T13:49:09.759Z,1510148949.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:10.123Z,1510148950.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:10.139Z,1510148950.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:10.525Z,1510148950.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:10.541Z,1510148950.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:10.899Z,1510148950.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:10.935Z,1510148950.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:11.305Z,1510148951.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:11.311Z,1510148951.311 [PNI_TCM](ERROR): CRC does not match. Expected:0x51758 got:0x1018
2017-11-08T13:49:11.333Z,1510148951.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:11.706Z,1510148951.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:11.732Z,1510148951.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:12.135Z,1510148952.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:12.187Z,1510148952.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:12.504Z,1510148952.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:12.531Z,1510148952.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:12.921Z,1510148952.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:12.937Z,1510148952.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:13.603Z,1510148953.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:13.631Z,1510148953.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:13.751Z,1510148953.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:13.787Z,1510148953.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:14.165Z,1510148954.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:14.196Z,1510148954.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:14.566Z,1510148954.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:14.595Z,1510148954.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:14.958Z,1510148954.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:14.989Z,1510148954.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:15.351Z,1510148955.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:15.367Z,1510148955.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:15.752Z,1510148955.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:15.769Z,1510148955.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:16.178Z,1510148956.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:16.195Z,1510148956.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:16.565Z,1510148956.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:16.597Z,1510148956.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:17.248Z,1510148957.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:17.264Z,1510148957.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:17.361Z,1510148957.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:17.386Z,1510148957.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:17.786Z,1510148957.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:17.812Z,1510148957.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:18.192Z,1510148958.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:18.208Z,1510148958.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:18.588Z,1510148958.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:18.605Z,1510148958.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:18.972Z,1510148958.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:19.002Z,1510148959.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:19.372Z,1510148959.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:19.402Z,1510148959.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:19.772Z,1510148959.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:19.802Z,1510148959.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:20.203Z,1510148960.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:20.223Z,1510148960.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:20.572Z,1510148960.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:20.602Z,1510148960.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:20.989Z,1510148960.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:21.005Z,1510148961.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:21.650Z,1510148961.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:21.667Z,1510148961.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:21.780Z,1510148961.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:21.810Z,1510148961.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:22.196Z,1510148962.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:22.223Z,1510148962.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:22.600Z,1510148962.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:22.623Z,1510148962.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:22.999Z,1510148962.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:23.060Z,1510148963.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:23.380Z,1510148963.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:23.405Z,1510148963.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:23.781Z,1510148963.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:23.835Z,1510148963.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:24.218Z,1510148964.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:24.360Z,1510148964.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:24.636Z,1510148964.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:24.775Z,1510148964.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:25.307Z,1510148965.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:25.379Z,1510148965.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:25.495Z,1510148965.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:25.531Z,1510148965.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:25.898Z,1510148965.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:25.944Z,1510148965.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:26.297Z,1510148966.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:26.329Z,1510148966.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:26.702Z,1510148966.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:26.726Z,1510148966.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:27.089Z,1510148967.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:27.105Z,1510148967.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:27.486Z,1510148967.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:27.501Z,1510148967.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:27.890Z,1510148967.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:27.906Z,1510148967.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:28.312Z,1510148968.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:28.329Z,1510148968.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:28.688Z,1510148968.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:28.711Z,1510148968.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:29.101Z,1510148969.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:29.133Z,1510148969.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:29.785Z,1510148969.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:29.801Z,1510148969.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:29.905Z,1510148969.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:29.947Z,1510148969.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:30.331Z,1510148970.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:30.348Z,1510148970.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:30.728Z,1510148970.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:30.744Z,1510148970.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:31.132Z,1510148971.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:31.149Z,1510148971.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:31.511Z,1510148971.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:31.548Z,1510148971.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:31.912Z,1510148971.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:31.947Z,1510148971.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:32.344Z,1510148972.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:32.360Z,1510148972.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:32.721Z,1510148972.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:32.754Z,1510148972.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:33.397Z,1510148973.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:33.413Z,1510148973.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:33.513Z,1510148973.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:33.555Z,1510148973.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:33.939Z,1510148973.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:33.995Z,1510148973.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:34.339Z,1510148974.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:34.355Z,1510148974.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:34.741Z,1510148974.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:34.757Z,1510148974.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:35.120Z,1510148975.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:35.148Z,1510148975.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:35.515Z,1510148975.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:35.549Z,1510148975.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:35.920Z,1510148975.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:35.951Z,1510148975.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:36.350Z,1510148976.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:36.368Z,1510148976.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:36.719Z,1510148976.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:36.753Z,1510148976.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:37.141Z,1510148977.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:37.157Z,1510148977.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:37.819Z,1510148977.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:37.848Z,1510148977.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:37.961Z,1510148977.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:38.007Z,1510148978.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:38.386Z,1510148978.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:38.415Z,1510148978.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:38.785Z,1510148978.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:38.816Z,1510148978.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:39.177Z,1510148979.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:39.210Z,1510148979.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:39.572Z,1510148979.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:39.587Z,1510148979.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:39.998Z,1510148979.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:40.014Z,1510148980.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:40.381Z,1510148980.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:40.414Z,1510148980.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:41.098Z,1510148981.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:41.119Z,1510148981.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:41.231Z,1510148981.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:41.280Z,1510148981.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:41.648Z,1510148981.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:41.664Z,1510148981.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:42.052Z,1510148982.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:42.075Z,1510148982.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:42.452Z,1510148982.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:42.469Z,1510148982.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:42.831Z,1510148982.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:42.865Z,1510148982.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:43.231Z,1510148983.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:43.257Z,1510148983.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:43.632Z,1510148983.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:43.658Z,1510148983.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:44.058Z,1510148984.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:44.080Z,1510148984.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:44.431Z,1510148984.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:44.458Z,1510148984.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:44.851Z,1510148984.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:44.908Z,1510148984.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:45.526Z,1510148985.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:45.563Z,1510148985.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:45.675Z,1510148985.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:45.723Z,1510148985.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:46.090Z,1510148986.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:46.159Z,1510148986.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:46.489Z,1510148986.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:46.523Z,1510148986.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:46.892Z,1510148986.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:46.918Z,1510148986.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:47.275Z,1510148987.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:47.331Z,1510148987.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:47.676Z,1510148987.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:47.691Z,1510148987.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:48.106Z,1510148988.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:48.167Z,1510148988.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:48.491Z,1510148988.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:48.515Z,1510148988.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:49.165Z,1510148989.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:49.181Z,1510148989.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:49.281Z,1510148989.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:49.332Z,1510148989.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:49.710Z,1510148989.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:49.727Z,1510148989.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:50.104Z,1510148990.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:50.120Z,1510148990.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:50.505Z,1510148990.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:50.539Z,1510148990.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:50.887Z,1510148990.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:50.926Z,1510148990.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:51.287Z,1510148991.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:51.333Z,1510148991.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:51.690Z,1510148991.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:51.723Z,1510148991.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:52.122Z,1510148992.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:52.138Z,1510148992.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:52.483Z,1510148992.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:52.524Z,1510148992.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:52.899Z,1510148992.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:52.936Z,1510148992.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:53.586Z,1510148993.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:53.614Z,1510148993.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:53.740Z,1510148993.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:53.776Z,1510148993.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:54.149Z,1510148994.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:54.177Z,1510148994.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:54.550Z,1510148994.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:54.582Z,1510148994.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:54.941Z,1510148994.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:54.974Z,1510148994.974 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:54.974Z,1510148994.974 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2017-11-08T13:49:54.974Z,1510148994.974 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T13:49:54.976Z,1510148994.976 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:54.976Z,1510148994.976 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2017-11-08T13:49:54.976Z,1510148994.976 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T13:49:54.982Z,1510148994.982 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:54.982Z,1510148994.982 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-11-08T13:49:54.982Z,1510148994.982 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T13:49:55.069Z,1510148995.069 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T13:49:55.069Z,1510148995.069 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T13:49:55.069Z,1510148995.069 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T13:49:55.337Z,1510148995.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:55.425Z,1510148995.425 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T13:49:55.425Z,1510148995.425 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2017-11-08T13:49:55.425Z,1510148995.425 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T13:49:55.425Z,1510148995.425 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2017-11-08T13:49:55.426Z,1510148995.426 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T13:49:55.426Z,1510148995.426 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-11-08T13:49:55.735Z,1510148995.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:55.751Z,1510148995.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T13:49:55.751Z,1510148995.751 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:49:55.751Z,1510148995.751 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:49:55.752Z,1510148995.752 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T13:49:55.752Z,1510148995.752 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:49:55.753Z,1510148995.753 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:49:55.753Z,1510148995.753 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T13:49:55.754Z,1510148995.754 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:49:55.754Z,1510148995.754 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:49:56.152Z,1510148996.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:56.203Z,1510148996.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T13:49:56.204Z,1510148996.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:56.546Z,1510148996.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:56.567Z,1510148996.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T13:49:56.568Z,1510148996.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:57.233Z,1510148997.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:57.249Z,1510148997.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s.
2017-11-08T13:49:57.250Z,1510148997.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:57.358Z,1510148997.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:57.393Z,1510148997.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T13:49:57.394Z,1510148997.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:57.778Z,1510148997.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:57.793Z,1510148997.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T13:49:57.794Z,1510148997.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:58.177Z,1510148998.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:58.193Z,1510148998.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T13:49:58.194Z,1510148998.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:58.561Z,1510148998.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:58.598Z,1510148998.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T13:49:58.599Z,1510148998.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:58.960Z,1510148998.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:58.976Z,1510148998.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T13:49:58.977Z,1510148998.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:59.352Z,1510148999.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:59.436Z,1510148999.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-08T13:49:59.437Z,1510148999.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:49:59.751Z,1510148999.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:49:59.840Z,1510148999.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-08T13:49:59.841Z,1510148999.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:00.185Z,1510149000.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:00.207Z,1510149000.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T13:50:00.208Z,1510149000.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:00.555Z,1510149000.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:00.586Z,1510149000.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T13:50:00.587Z,1510149000.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:00.976Z,1510149000.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:00.992Z,1510149000.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T13:50:00.993Z,1510149000.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:01.630Z,1510149001.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:01.647Z,1510149001.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2017-11-08T13:50:01.648Z,1510149001.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:01.759Z,1510149001.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:01.789Z,1510149001.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T13:50:01.790Z,1510149001.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:02.177Z,1510149002.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:02.193Z,1510149002.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T13:50:02.194Z,1510149002.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:02.577Z,1510149002.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:02.592Z,1510149002.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T13:50:02.593Z,1510149002.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:02.981Z,1510149002.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:02.997Z,1510149002.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T13:50:02.998Z,1510149002.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:03.359Z,1510149003.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:03.385Z,1510149003.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T13:50:03.386Z,1510149003.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:03.760Z,1510149003.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:03.786Z,1510149003.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T13:50:03.787Z,1510149003.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:04.187Z,1510149004.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:04.237Z,1510149004.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T13:50:04.238Z,1510149004.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:04.573Z,1510149004.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:04.589Z,1510149004.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T13:50:04.590Z,1510149004.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:05.248Z,1510149005.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:05.271Z,1510149005.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2017-11-08T13:50:05.272Z,1510149005.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:05.384Z,1510149005.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:05.427Z,1510149005.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T13:50:05.428Z,1510149005.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:05.808Z,1510149005.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:05.824Z,1510149005.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T13:50:05.825Z,1510149005.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:06.208Z,1510149006.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:06.224Z,1510149006.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T13:50:06.225Z,1510149006.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:06.606Z,1510149006.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:06.627Z,1510149006.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T13:50:06.628Z,1510149006.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:06.988Z,1510149006.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:07.054Z,1510149007.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T13:50:07.055Z,1510149007.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:07.384Z,1510149007.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:07.419Z,1510149007.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T13:50:07.420Z,1510149007.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:07.789Z,1510149007.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:07.824Z,1510149007.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T13:50:07.825Z,1510149007.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:08.221Z,1510149008.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:08.286Z,1510149008.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T13:50:08.287Z,1510149008.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:08.584Z,1510149008.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:08.600Z,1510149008.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T13:50:08.601Z,1510149008.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:09.001Z,1510149009.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:09.070Z,1510149009.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T13:50:09.071Z,1510149009.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:09.722Z,1510149009.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:09.743Z,1510149009.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T13:50:09.744Z,1510149009.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:09.845Z,1510149009.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:09.903Z,1510149009.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T13:50:09.904Z,1510149009.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:10.272Z,1510149010.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:10.287Z,1510149010.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T13:50:10.288Z,1510149010.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:10.671Z,1510149010.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:10.686Z,1510149010.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T13:50:10.687Z,1510149010.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:11.068Z,1510149011.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:11.084Z,1510149011.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T13:50:11.085Z,1510149011.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:11.451Z,1510149011.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:11.476Z,1510149011.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T13:50:11.477Z,1510149011.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:11.852Z,1510149011.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:11.875Z,1510149011.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T13:50:11.876Z,1510149011.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:12.279Z,1510149012.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:12.294Z,1510149012.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T13:50:12.295Z,1510149012.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:12.671Z,1510149012.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:12.687Z,1510149012.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T13:50:12.688Z,1510149012.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:13.334Z,1510149013.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:13.349Z,1510149013.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T13:50:13.350Z,1510149013.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:13.486Z,1510149013.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:13.531Z,1510149013.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-08T13:50:13.532Z,1510149013.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:13.905Z,1510149013.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:13.935Z,1510149013.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-08T13:50:13.936Z,1510149013.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:14.301Z,1510149014.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:14.328Z,1510149014.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-08T13:50:14.329Z,1510149014.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:14.701Z,1510149014.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:14.729Z,1510149014.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-08T13:50:14.730Z,1510149014.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:15.091Z,1510149015.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:15.112Z,1510149015.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:15.494Z,1510149015.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:15.509Z,1510149015.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:15.892Z,1510149015.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:15.908Z,1510149015.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:16.317Z,1510149016.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:16.342Z,1510149016.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:16.694Z,1510149016.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:16.710Z,1510149016.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:17.101Z,1510149017.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:17.117Z,1510149017.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:17.788Z,1510149017.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:17.804Z,1510149017.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:17.905Z,1510149017.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:17.967Z,1510149017.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:18.333Z,1510149018.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:18.350Z,1510149018.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:18.735Z,1510149018.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:18.751Z,1510149018.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:19.121Z,1510149019.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:19.152Z,1510149019.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:19.515Z,1510149019.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:19.547Z,1510149019.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:19.916Z,1510149019.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:19.946Z,1510149019.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:20.339Z,1510149020.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:20.356Z,1510149020.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:20.737Z,1510149020.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:20.759Z,1510149020.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:21.439Z,1510149021.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:21.463Z,1510149021.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:21.603Z,1510149021.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:21.643Z,1510149021.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:22.017Z,1510149022.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:22.051Z,1510149022.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:22.417Z,1510149022.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:22.444Z,1510149022.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:22.813Z,1510149022.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:22.846Z,1510149022.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:23.204Z,1510149023.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:23.220Z,1510149023.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:23.604Z,1510149023.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:23.674Z,1510149023.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:24.021Z,1510149024.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:24.048Z,1510149024.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:24.403Z,1510149024.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:24.419Z,1510149024.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:24.803Z,1510149024.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:24.823Z,1510149024.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:25.218Z,1510149025.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:25.244Z,1510149025.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:25.891Z,1510149025.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:25.911Z,1510149025.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:26.019Z,1510149026.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:26.067Z,1510149026.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:26.435Z,1510149026.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:26.452Z,1510149026.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:26.836Z,1510149026.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:26.859Z,1510149026.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:27.240Z,1510149027.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:27.256Z,1510149027.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:27.619Z,1510149027.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:27.644Z,1510149027.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:28.019Z,1510149028.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:28.045Z,1510149028.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:28.420Z,1510149028.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:28.445Z,1510149028.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:28.819Z,1510149028.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:28.845Z,1510149028.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:29.248Z,1510149029.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:29.264Z,1510149029.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:29.639Z,1510149029.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:29.656Z,1510149029.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:30.318Z,1510149030.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:30.367Z,1510149030.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:30.509Z,1510149030.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:30.551Z,1510149030.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:30.936Z,1510149030.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:30.942Z,1510149030.942 [PNI_TCM](ERROR): CRC does not match. Expected:0x60674 got:0x46050
2017-11-08T13:50:30.995Z,1510149030.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:31.335Z,1510149031.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:31.351Z,1510149031.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:31.736Z,1510149031.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:31.795Z,1510149031.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:32.118Z,1510149032.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:32.151Z,1510149032.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:32.517Z,1510149032.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:32.549Z,1510149032.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:32.915Z,1510149032.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:32.939Z,1510149032.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:33.348Z,1510149033.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:33.364Z,1510149033.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:33.711Z,1510149033.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:33.749Z,1510149033.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:34.126Z,1510149034.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:34.142Z,1510149034.142 [PNI_TCM](ERROR): CRC does not match. Expected:0x49076 got:0x1857
2017-11-08T13:50:34.172Z,1510149034.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:34.814Z,1510149034.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:34.830Z,1510149034.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:34.963Z,1510149034.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:34.980Z,1510149034.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:35.378Z,1510149035.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:35.411Z,1510149035.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:35.782Z,1510149035.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:35.811Z,1510149035.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:36.173Z,1510149036.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:36.209Z,1510149036.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:36.568Z,1510149036.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:36.584Z,1510149036.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:36.999Z,1510149036.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:37.016Z,1510149037.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:37.381Z,1510149037.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:37.409Z,1510149037.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:38.100Z,1510149038.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:38.116Z,1510149038.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:38.223Z,1510149038.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:38.256Z,1510149038.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:38.634Z,1510149038.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:38.688Z,1510149038.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:39.034Z,1510149039.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:39.097Z,1510149039.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:39.439Z,1510149039.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:39.535Z,1510149039.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:39.822Z,1510149039.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:39.875Z,1510149039.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:40.226Z,1510149040.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:40.247Z,1510149040.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:40.629Z,1510149040.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:40.646Z,1510149040.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:41.046Z,1510149041.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:41.078Z,1510149041.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:41.426Z,1510149041.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:41.447Z,1510149041.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:41.836Z,1510149041.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:41.853Z,1510149041.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:42.519Z,1510149042.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:42.535Z,1510149042.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:42.641Z,1510149042.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:42.691Z,1510149042.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:43.066Z,1510149043.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:43.087Z,1510149043.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:43.461Z,1510149043.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:43.500Z,1510149043.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:43.857Z,1510149043.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:43.880Z,1510149043.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:44.253Z,1510149044.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:44.269Z,1510149044.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:44.652Z,1510149044.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:44.668Z,1510149044.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:45.069Z,1510149045.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:45.094Z,1510149045.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:45.462Z,1510149045.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:45.478Z,1510149045.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:46.137Z,1510149046.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:46.154Z,1510149046.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:46.265Z,1510149046.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:46.316Z,1510149046.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:46.692Z,1510149046.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:46.708Z,1510149046.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:47.092Z,1510149047.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:47.108Z,1510149047.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:47.493Z,1510149047.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:47.509Z,1510149047.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:47.872Z,1510149047.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:47.904Z,1510149047.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:48.271Z,1510149048.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:48.287Z,1510149048.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:48.672Z,1510149048.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:48.705Z,1510149048.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:49.107Z,1510149049.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:49.124Z,1510149049.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:49.471Z,1510149049.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:49.487Z,1510149049.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:49.885Z,1510149049.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:49.914Z,1510149049.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:50.570Z,1510149050.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:50.592Z,1510149050.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:50.727Z,1510149050.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:50.771Z,1510149050.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:51.142Z,1510149051.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:51.168Z,1510149051.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:51.541Z,1510149051.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:51.568Z,1510149051.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:51.937Z,1510149051.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:51.970Z,1510149051.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:52.327Z,1510149052.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:52.384Z,1510149052.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:52.732Z,1510149052.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:52.748Z,1510149052.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:53.149Z,1510149053.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:53.173Z,1510149053.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:53.541Z,1510149053.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:53.573Z,1510149053.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:54.224Z,1510149054.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:54.244Z,1510149054.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:54.378Z,1510149054.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:54.418Z,1510149054.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:54.789Z,1510149054.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:54.827Z,1510149054.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:55.190Z,1510149055.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:55.198Z,1510149055.198 [BPC1](ERROR): Failed to receive battery data
2017-11-08T13:50:55.198Z,1510149055.198 [BPC1] Communications Fault, FailCount= 1
2017-11-08T13:50:55.198Z,1510149055.198 [BPC1](ERROR): Communications Fault
2017-11-08T13:50:55.228Z,1510149055.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:55.329Z,1510149055.329 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T13:50:55.582Z,1510149055.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:55.598Z,1510149055.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:55.978Z,1510149055.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:55.994Z,1510149055.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:56.378Z,1510149056.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:56.395Z,1510149056.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:56.469Z,1510149056.469 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T13:50:56.469Z,1510149056.469 [BPC1] No Fault, FailCount= 1
2017-11-08T13:50:56.778Z,1510149056.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:56.848Z,1510149056.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:57.202Z,1510149057.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:57.231Z,1510149057.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:57.579Z,1510149057.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:57.595Z,1510149057.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:57.985Z,1510149057.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:58.001Z,1510149058.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:58.670Z,1510149058.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:58.687Z,1510149058.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:58.795Z,1510149058.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:58.835Z,1510149058.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:59.206Z,1510149059.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:59.238Z,1510149059.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:50:59.605Z,1510149059.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:50:59.630Z,1510149059.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:00.016Z,1510149060.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:00.032Z,1510149060.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:00.391Z,1510149060.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:00.432Z,1510149060.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:00.792Z,1510149060.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:00.808Z,1510149060.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:01.227Z,1510149061.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:01.243Z,1510149061.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:01.609Z,1510149061.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:01.642Z,1510149061.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:02.310Z,1510149062.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:02.334Z,1510149062.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:02.447Z,1510149062.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:02.480Z,1510149062.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:02.858Z,1510149062.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:02.887Z,1510149062.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:03.257Z,1510149063.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:03.282Z,1510149063.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:03.668Z,1510149063.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:03.686Z,1510149063.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:04.047Z,1510149064.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:04.080Z,1510149064.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:04.447Z,1510149064.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:04.463Z,1510149064.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:04.848Z,1510149064.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:04.906Z,1510149064.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:05.276Z,1510149065.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:05.296Z,1510149065.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:05.643Z,1510149065.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:05.663Z,1510149065.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:06.062Z,1510149066.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:06.088Z,1510149066.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:06.741Z,1510149066.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:06.758Z,1510149066.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:06.897Z,1510149066.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:06.913Z,1510149066.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:07.306Z,1510149067.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:07.334Z,1510149067.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:07.707Z,1510149067.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:07.715Z,1510149067.715 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-11-08T13:51:07.737Z,1510149067.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:08.103Z,1510149068.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:08.128Z,1510149068.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:08.496Z,1510149068.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:08.513Z,1510149068.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:08.894Z,1510149068.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:08.937Z,1510149068.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:09.319Z,1510149069.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:09.344Z,1510149069.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:09.707Z,1510149069.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:09.740Z,1510149069.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:10.380Z,1510149070.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:10.397Z,1510149070.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:10.509Z,1510149070.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:10.545Z,1510149070.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:10.936Z,1510149070.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:10.942Z,1510149070.942 [PNI_TCM](ERROR): CRC does not match. Expected:0x663 got:0x7361
2017-11-08T13:51:10.972Z,1510149070.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:11.335Z,1510149071.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:11.355Z,1510149071.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:11.736Z,1510149071.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:11.752Z,1510149071.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:12.116Z,1510149072.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:12.151Z,1510149072.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:12.513Z,1510149072.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:12.552Z,1510149072.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:12.921Z,1510149072.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:12.955Z,1510149072.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:13.347Z,1510149073.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:13.364Z,1510149073.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:13.717Z,1510149073.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:13.750Z,1510149073.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:14.137Z,1510149074.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:14.154Z,1510149074.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:14.814Z,1510149074.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:14.831Z,1510149074.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:14.962Z,1510149074.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:14.979Z,1510149074.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:15.370Z,1510149075.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:15.386Z,1510149075.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:15.770Z,1510149075.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:15.816Z,1510149075.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:16.166Z,1510149076.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:16.191Z,1510149076.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:16.562Z,1510149076.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:16.578Z,1510149076.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:16.982Z,1510149076.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:17.031Z,1510149077.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:17.366Z,1510149077.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:17.387Z,1510149077.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:18.037Z,1510149078.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:18.109Z,1510149078.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:18.227Z,1510149078.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:18.268Z,1510149078.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:18.638Z,1510149078.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:18.674Z,1510149078.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:19.041Z,1510149079.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:19.069Z,1510149079.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:19.442Z,1510149079.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:19.468Z,1510149079.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:19.827Z,1510149079.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:19.848Z,1510149079.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:20.231Z,1510149080.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:20.247Z,1510149080.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:20.632Z,1510149080.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:20.648Z,1510149080.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:21.060Z,1510149081.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:21.084Z,1510149081.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:21.427Z,1510149081.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:21.443Z,1510149081.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:21.845Z,1510149081.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:21.879Z,1510149081.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:22.520Z,1510149082.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:22.536Z,1510149082.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:22.633Z,1510149082.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:22.683Z,1510149082.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:23.060Z,1510149083.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:23.083Z,1510149083.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:23.460Z,1510149083.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:23.476Z,1510149083.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:23.849Z,1510149083.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:23.876Z,1510149083.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:24.239Z,1510149084.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:24.271Z,1510149084.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:24.640Z,1510149084.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:24.655Z,1510149084.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:25.068Z,1510149085.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:25.084Z,1510149085.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:25.453Z,1510149085.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:25.484Z,1510149085.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:26.162Z,1510149086.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:26.224Z,1510149086.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:26.333Z,1510149086.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:26.381Z,1510149086.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:26.754Z,1510149086.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:26.786Z,1510149086.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:27.149Z,1510149087.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:27.176Z,1510149087.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:27.553Z,1510149087.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:27.580Z,1510149087.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:27.939Z,1510149087.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:27.956Z,1510149087.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:28.339Z,1510149088.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:28.359Z,1510149088.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:28.740Z,1510149088.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:28.756Z,1510149088.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:29.171Z,1510149089.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:29.188Z,1510149089.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:29.553Z,1510149089.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:29.581Z,1510149089.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:30.227Z,1510149090.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:30.247Z,1510149090.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:30.359Z,1510149090.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:30.403Z,1510149090.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:30.776Z,1510149090.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:30.792Z,1510149090.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:31.180Z,1510149091.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:31.196Z,1510149091.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:31.566Z,1510149091.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:31.599Z,1510149091.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:31.955Z,1510149091.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:31.971Z,1510149091.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:32.355Z,1510149092.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:32.372Z,1510149092.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:32.760Z,1510149092.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:32.793Z,1510149092.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:33.187Z,1510149093.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:33.204Z,1510149093.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:33.574Z,1510149093.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:33.601Z,1510149093.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:34.254Z,1510149094.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:34.271Z,1510149094.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:34.398Z,1510149094.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:34.443Z,1510149094.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:34.805Z,1510149094.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:34.827Z,1510149094.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:35.206Z,1510149095.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:35.223Z,1510149095.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:35.602Z,1510149095.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:35.619Z,1510149095.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:35.998Z,1510149095.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:36.014Z,1510149096.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:36.395Z,1510149096.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:36.416Z,1510149096.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:36.798Z,1510149096.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:36.814Z,1510149096.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:37.222Z,1510149097.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:37.262Z,1510149097.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:37.598Z,1510149097.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:37.614Z,1510149097.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:38.006Z,1510149098.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:38.075Z,1510149098.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:38.683Z,1510149098.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:38.705Z,1510149098.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:38.823Z,1510149098.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:38.900Z,1510149098.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:39.244Z,1510149099.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:39.260Z,1510149099.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:39.633Z,1510149099.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:39.684Z,1510149099.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:40.044Z,1510149100.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:40.060Z,1510149100.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:40.423Z,1510149100.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:40.458Z,1510149100.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:40.820Z,1510149100.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:40.835Z,1510149100.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:41.255Z,1510149101.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:41.271Z,1510149101.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:41.644Z,1510149101.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:41.661Z,1510149101.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:42.304Z,1510149102.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:42.321Z,1510149102.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:42.427Z,1510149102.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:42.463Z,1510149102.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:42.844Z,1510149102.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:42.860Z,1510149102.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:43.248Z,1510149103.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:43.263Z,1510149103.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:43.648Z,1510149103.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:43.664Z,1510149103.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:44.027Z,1510149104.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:44.056Z,1510149104.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:44.427Z,1510149104.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:44.464Z,1510149104.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:44.824Z,1510149104.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:44.861Z,1510149104.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:45.263Z,1510149105.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:45.280Z,1510149105.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:45.623Z,1510149105.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:45.639Z,1510149105.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:46.048Z,1510149106.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:46.064Z,1510149106.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:46.721Z,1510149106.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:46.737Z,1510149106.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:46.871Z,1510149106.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:46.919Z,1510149106.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:47.290Z,1510149107.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:47.325Z,1510149107.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:47.689Z,1510149107.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:47.754Z,1510149107.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:48.085Z,1510149108.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:48.122Z,1510149108.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:48.476Z,1510149108.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:48.512Z,1510149108.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:48.875Z,1510149108.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:48.895Z,1510149108.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:49.305Z,1510149109.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:49.429Z,1510149109.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:49.686Z,1510149109.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:49.732Z,1510149109.732 [PNI_TCM](ERROR): CRC does not match. Expected:0x61712 got:0x38963
2017-11-08T13:51:49.753Z,1510149109.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:50.365Z,1510149110.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:50.381Z,1510149110.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:50.493Z,1510149110.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:50.545Z,1510149110.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:50.921Z,1510149110.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:50.938Z,1510149110.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:51.320Z,1510149111.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:51.335Z,1510149111.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:51.709Z,1510149111.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:51.745Z,1510149111.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:52.099Z,1510149112.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:52.143Z,1510149112.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:52.504Z,1510149112.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:52.543Z,1510149112.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:52.898Z,1510149112.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:52.915Z,1510149112.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:53.336Z,1510149113.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:53.352Z,1510149113.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:53.700Z,1510149113.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:53.733Z,1510149113.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:54.112Z,1510149114.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:54.140Z,1510149114.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:54.961Z,1510149114.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:54.991Z,1510149114.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:55.099Z,1510149115.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:55.138Z,1510149115.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:55.514Z,1510149115.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:55.544Z,1510149115.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:55.905Z,1510149115.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:55.921Z,1510149115.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:56.305Z,1510149116.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:56.322Z,1510149116.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:56.700Z,1510149116.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:56.716Z,1510149116.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:57.099Z,1510149117.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:57.119Z,1510149117.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:57.499Z,1510149117.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:57.516Z,1510149117.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:57.900Z,1510149117.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:57.924Z,1510149117.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:58.321Z,1510149118.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:58.360Z,1510149118.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:58.709Z,1510149118.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:58.726Z,1510149118.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:59.396Z,1510149119.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:59.412Z,1510149119.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:59.519Z,1510149119.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:59.579Z,1510149119.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:51:59.940Z,1510149119.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:51:59.956Z,1510149119.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:00.340Z,1510149120.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:00.398Z,1510149120.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:00.738Z,1510149120.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:00.754Z,1510149120.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:01.123Z,1510149121.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:01.172Z,1510149121.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:01.519Z,1510149121.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:01.554Z,1510149121.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:01.924Z,1510149121.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:01.949Z,1510149121.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:02.351Z,1510149122.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:02.366Z,1510149122.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:02.719Z,1510149122.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:02.754Z,1510149122.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:03.143Z,1510149123.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:03.159Z,1510149123.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:03.809Z,1510149123.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:03.825Z,1510149123.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:03.958Z,1510149123.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:04.007Z,1510149124.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:04.374Z,1510149124.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:04.404Z,1510149124.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:04.773Z,1510149124.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:04.800Z,1510149124.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:05.174Z,1510149125.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:05.204Z,1510149125.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:05.564Z,1510149125.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:05.600Z,1510149125.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:05.996Z,1510149125.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:06.011Z,1510149126.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:06.373Z,1510149126.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:06.410Z,1510149126.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:07.062Z,1510149127.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:07.084Z,1510149127.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:07.215Z,1510149127.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:07.259Z,1510149127.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:07.622Z,1510149127.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:07.650Z,1510149127.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:08.021Z,1510149128.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:08.037Z,1510149128.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:08.417Z,1510149128.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:08.433Z,1510149128.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:08.810Z,1510149128.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:08.826Z,1510149128.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:09.210Z,1510149129.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:09.256Z,1510149129.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:09.614Z,1510149129.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:09.630Z,1510149129.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:10.033Z,1510149130.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:10.062Z,1510149130.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:10.413Z,1510149130.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:10.428Z,1510149130.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:10.821Z,1510149130.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:10.838Z,1510149130.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:11.618Z,1510149131.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:11.639Z,1510149131.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:11.777Z,1510149131.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:11.793Z,1510149131.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:12.190Z,1510149132.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:12.219Z,1510149132.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:12.589Z,1510149132.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:12.625Z,1510149132.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:12.987Z,1510149132.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:13.007Z,1510149133.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:13.382Z,1510149133.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:13.399Z,1510149133.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:13.778Z,1510149133.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:13.795Z,1510149133.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:14.198Z,1510149134.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:14.227Z,1510149134.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:14.591Z,1510149134.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:14.607Z,1510149134.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:15.272Z,1510149135.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:15.288Z,1510149135.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:15.398Z,1510149135.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:15.441Z,1510149135.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:15.822Z,1510149135.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:15.838Z,1510149135.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:16.225Z,1510149136.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:16.241Z,1510149136.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:16.625Z,1510149136.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:16.653Z,1510149136.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:17.007Z,1510149137.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:17.033Z,1510149137.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:17.403Z,1510149137.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:17.435Z,1510149137.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:17.803Z,1510149137.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:17.839Z,1510149137.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:18.233Z,1510149138.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:18.249Z,1510149138.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:18.603Z,1510149138.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:18.639Z,1510149138.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:19.025Z,1510149139.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:19.042Z,1510149139.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:19.703Z,1510149139.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:19.763Z,1510149139.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:19.896Z,1510149139.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:19.947Z,1510149139.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:20.314Z,1510149140.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:20.347Z,1510149140.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:20.715Z,1510149140.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:20.747Z,1510149140.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:21.115Z,1510149141.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:21.152Z,1510149141.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:21.499Z,1510149141.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:21.552Z,1510149141.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:21.903Z,1510149141.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:21.921Z,1510149141.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:22.326Z,1510149142.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:22.379Z,1510149142.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:22.713Z,1510149142.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:22.750Z,1510149142.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:23.396Z,1510149143.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:23.445Z,1510149143.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:23.559Z,1510149143.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:23.603Z,1510149143.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:23.978Z,1510149143.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:24.007Z,1510149144.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:24.378Z,1510149144.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:24.412Z,1510149144.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:24.778Z,1510149144.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:24.811Z,1510149144.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:25.168Z,1510149145.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:25.200Z,1510149145.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:25.565Z,1510149145.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:25.582Z,1510149145.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:25.986Z,1510149145.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:26.010Z,1510149146.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:26.367Z,1510149146.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:26.384Z,1510149146.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:26.763Z,1510149146.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:26.780Z,1510149146.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:27.178Z,1510149147.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:27.214Z,1510149147.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:27.854Z,1510149147.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:27.870Z,1510149147.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:27.970Z,1510149147.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:28.021Z,1510149148.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:28.387Z,1510149148.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:28.413Z,1510149148.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:28.786Z,1510149148.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:28.832Z,1510149148.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:29.187Z,1510149149.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:29.236Z,1510149149.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:29.577Z,1510149149.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:29.615Z,1510149149.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:30.002Z,1510149150.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:30.075Z,1510149150.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:30.392Z,1510149150.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:30.409Z,1510149150.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:31.074Z,1510149151.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:31.100Z,1510149151.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:31.210Z,1510149151.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:31.263Z,1510149151.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:31.630Z,1510149151.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:31.696Z,1510149151.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:32.030Z,1510149152.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:32.056Z,1510149152.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:32.430Z,1510149152.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:32.457Z,1510149152.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:32.815Z,1510149152.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:32.845Z,1510149152.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:33.215Z,1510149153.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:33.259Z,1510149153.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:33.620Z,1510149153.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:33.637Z,1510149153.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:34.048Z,1510149154.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:34.071Z,1510149154.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:34.419Z,1510149154.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:34.435Z,1510149154.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:34.829Z,1510149154.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:34.862Z,1510149154.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:35.511Z,1510149155.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:35.527Z,1510149155.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:35.634Z,1510149155.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:35.681Z,1510149155.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:36.066Z,1510149156.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:36.083Z,1510149156.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:36.454Z,1510149156.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:36.491Z,1510149156.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:36.846Z,1510149156.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:36.874Z,1510149156.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:37.241Z,1510149157.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:37.277Z,1510149157.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:37.641Z,1510149157.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:37.677Z,1510149157.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:38.068Z,1510149158.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:38.090Z,1510149158.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:38.454Z,1510149158.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:38.482Z,1510149158.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:39.134Z,1510149159.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:39.150Z,1510149159.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:39.259Z,1510149159.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:39.308Z,1510149159.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:39.679Z,1510149159.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:39.700Z,1510149159.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:40.081Z,1510149160.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:40.098Z,1510149160.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:40.473Z,1510149160.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:40.502Z,1510149160.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:40.860Z,1510149160.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:40.906Z,1510149160.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:41.259Z,1510149161.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:41.299Z,1510149161.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:41.660Z,1510149161.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:41.696Z,1510149161.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:42.094Z,1510149162.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:42.167Z,1510149162.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:42.459Z,1510149162.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:42.480Z,1510149162.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:42.877Z,1510149162.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:42.908Z,1510149162.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:43.561Z,1510149163.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:43.622Z,1510149163.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:43.746Z,1510149163.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:43.776Z,1510149163.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:44.154Z,1510149164.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:44.179Z,1510149164.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:44.561Z,1510149164.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:44.608Z,1510149164.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:44.963Z,1510149164.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:44.983Z,1510149164.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:45.343Z,1510149165.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:45.407Z,1510149165.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:45.741Z,1510149165.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:45.767Z,1510149165.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:46.164Z,1510149166.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:46.181Z,1510149166.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:46.564Z,1510149166.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:46.588Z,1510149166.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:46.669Z,1510149166.669 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T13:52:47.225Z,1510149167.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:47.241Z,1510149167.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:47.379Z,1510149167.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:47.396Z,1510149167.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:47.798Z,1510149167.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:47.825Z,1510149167.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:48.198Z,1510149168.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:48.225Z,1510149168.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:48.595Z,1510149168.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:48.624Z,1510149168.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:48.988Z,1510149168.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:49.005Z,1510149169.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:49.388Z,1510149169.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:49.405Z,1510149169.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:49.789Z,1510149169.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:49.806Z,1510149169.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:50.221Z,1510149170.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:50.237Z,1510149170.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:50.587Z,1510149170.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:50.603Z,1510149170.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:50.994Z,1510149170.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:51.038Z,1510149171.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:51.707Z,1510149171.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:51.735Z,1510149171.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:51.848Z,1510149171.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:51.888Z,1510149171.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:52.271Z,1510149172.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:52.292Z,1510149172.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:52.669Z,1510149172.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:52.685Z,1510149172.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:53.073Z,1510149173.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:53.089Z,1510149173.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:53.453Z,1510149173.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:53.508Z,1510149173.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:53.848Z,1510149173.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:53.885Z,1510149173.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:54.279Z,1510149174.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:54.299Z,1510149174.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:54.670Z,1510149174.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:54.694Z,1510149174.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:55.345Z,1510149175.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:55.385Z,1510149175.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:55.495Z,1510149175.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:55.547Z,1510149175.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:55.918Z,1510149175.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:55.947Z,1510149175.947 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:55.948Z,1510149175.948 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2017-11-08T13:52:55.948Z,1510149175.948 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T13:52:55.950Z,1510149175.950 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:55.950Z,1510149175.950 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2017-11-08T13:52:55.950Z,1510149175.950 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T13:52:55.951Z,1510149175.951 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:55.952Z,1510149175.952 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-11-08T13:52:55.952Z,1510149175.952 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T13:52:56.025Z,1510149176.025 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T13:52:56.025Z,1510149176.025 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T13:52:56.026Z,1510149176.026 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T13:52:56.317Z,1510149176.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:56.425Z,1510149176.425 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T13:52:56.425Z,1510149176.425 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2017-11-08T13:52:56.425Z,1510149176.425 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T13:52:56.425Z,1510149176.425 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2017-11-08T13:52:56.426Z,1510149176.426 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T13:52:56.426Z,1510149176.426 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-11-08T13:52:56.717Z,1510149176.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:56.745Z,1510149176.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T13:52:56.745Z,1510149176.745 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:52:56.745Z,1510149176.745 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:52:56.746Z,1510149176.746 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T13:52:56.746Z,1510149176.746 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:52:56.746Z,1510149176.746 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:52:56.747Z,1510149176.747 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T13:52:56.747Z,1510149176.747 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:52:56.748Z,1510149176.748 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:52:57.112Z,1510149177.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:57.132Z,1510149177.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T13:52:57.137Z,1510149177.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:57.506Z,1510149177.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:57.522Z,1510149177.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T13:52:57.523Z,1510149177.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:57.908Z,1510149177.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:57.923Z,1510149177.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T13:52:57.925Z,1510149177.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:58.330Z,1510149178.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:58.355Z,1510149178.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T13:52:58.356Z,1510149178.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:58.707Z,1510149178.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:58.723Z,1510149178.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T13:52:58.725Z,1510149178.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:59.114Z,1510149179.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:59.130Z,1510149179.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T13:52:59.131Z,1510149179.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:59.800Z,1510149179.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:59.815Z,1510149179.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-11-08T13:52:59.816Z,1510149179.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:52:59.918Z,1510149179.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:52:59.963Z,1510149179.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T13:52:59.964Z,1510149179.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:00.345Z,1510149180.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:00.361Z,1510149180.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T13:53:00.362Z,1510149180.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:00.742Z,1510149180.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:00.773Z,1510149180.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T13:53:00.774Z,1510149180.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:01.131Z,1510149181.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:01.156Z,1510149181.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T13:53:01.157Z,1510149181.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:01.524Z,1510149181.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:01.557Z,1510149181.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T13:53:01.558Z,1510149181.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:01.923Z,1510149181.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:01.940Z,1510149181.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T13:53:01.961Z,1510149181.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:02.343Z,1510149182.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:02.375Z,1510149182.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T13:53:02.376Z,1510149182.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:02.738Z,1510149182.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:02.771Z,1510149182.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T13:53:02.772Z,1510149182.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:03.418Z,1510149183.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:03.433Z,1510149183.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2017-11-08T13:53:03.434Z,1510149183.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:03.541Z,1510149183.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:03.587Z,1510149183.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T13:53:03.588Z,1510149183.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:03.968Z,1510149183.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:04.034Z,1510149184.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T13:53:04.035Z,1510149184.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:04.368Z,1510149184.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:04.383Z,1510149184.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T13:53:04.385Z,1510149184.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:04.759Z,1510149184.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:04.777Z,1510149184.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T13:53:04.778Z,1510149184.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:05.151Z,1510149185.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:05.180Z,1510149185.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T13:53:05.185Z,1510149185.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:05.545Z,1510149185.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:05.595Z,1510149185.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T13:53:05.596Z,1510149185.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:05.972Z,1510149185.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:05.989Z,1510149185.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T13:53:05.990Z,1510149185.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:06.348Z,1510149186.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:06.383Z,1510149186.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T13:53:06.385Z,1510149186.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:06.744Z,1510149186.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:06.803Z,1510149186.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T13:53:06.804Z,1510149186.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:07.168Z,1510149187.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:07.183Z,1510149187.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T13:53:07.185Z,1510149187.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:07.881Z,1510149187.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:07.921Z,1510149187.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T13:53:07.922Z,1510149187.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:08.035Z,1510149188.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:08.082Z,1510149188.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T13:53:08.083Z,1510149188.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:08.460Z,1510149188.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:08.476Z,1510149188.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T13:53:08.477Z,1510149188.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:08.861Z,1510149188.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:08.877Z,1510149188.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T13:53:08.878Z,1510149188.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:09.251Z,1510149189.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:09.375Z,1510149189.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2017-11-08T13:53:09.376Z,1510149189.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:09.640Z,1510149189.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:09.766Z,1510149189.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2017-11-08T13:53:09.767Z,1510149189.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:10.047Z,1510149190.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:10.087Z,1510149190.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T13:53:10.089Z,1510149190.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:10.443Z,1510149190.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:10.475Z,1510149190.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T13:53:10.475Z,1510149190.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:10.845Z,1510149190.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:10.875Z,1510149190.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T13:53:10.876Z,1510149190.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:11.275Z,1510149191.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:11.291Z,1510149191.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T13:53:11.293Z,1510149191.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:11.661Z,1510149191.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:11.682Z,1510149191.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T13:53:11.683Z,1510149191.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:12.342Z,1510149192.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:12.370Z,1510149192.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T13:53:12.371Z,1510149192.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:12.491Z,1510149192.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:12.535Z,1510149192.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-08T13:53:12.536Z,1510149192.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:12.904Z,1510149192.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:12.965Z,1510149192.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-11-08T13:53:12.966Z,1510149192.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:13.310Z,1510149193.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:13.335Z,1510149193.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-08T13:53:13.336Z,1510149193.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:13.709Z,1510149193.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:13.738Z,1510149193.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-08T13:53:13.739Z,1510149193.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:14.095Z,1510149194.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:14.139Z,1510149194.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-08T13:53:14.140Z,1510149194.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:14.222Z,1510149194.222 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T13:53:14.222Z,1510149194.222 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T13:53:14.449Z,1510149194.449 [Rowe_600LCM](INFO): Initializing
2017-11-08T13:53:14.449Z,1510149194.449 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T13:53:14.449Z,1510149194.449 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T13:53:14.449Z,1510149194.449 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T13:53:14.449Z,1510149194.449 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T13:53:14.515Z,1510149194.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:14.526Z,1510149194.526 [PNI_TCM](ERROR): CRC does not match. Expected:0x873 got:0x7955
2017-11-08T13:53:14.551Z,1510149194.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-08T13:53:14.552Z,1510149194.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:14.633Z,1510149194.633 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:53:14.853Z,1510149194.853 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T13:53:14.937Z,1510149194.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:14.963Z,1510149194.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-08T13:53:14.970Z,1510149194.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:15.060Z,1510149195.060 [Rowe_600LCM](INFO): Powering down
2017-11-08T13:53:15.319Z,1510149195.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:15.346Z,1510149195.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-08T13:53:15.347Z,1510149195.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:15.695Z,1510149195.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:15.743Z,1510149195.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-08T13:53:15.745Z,1510149195.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:16.107Z,1510149196.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:16.114Z,1510149196.114 [PNI_TCM](ERROR): CRC does not match. Expected:0x7560 got:0x13080
2017-11-08T13:53:16.164Z,1510149196.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:16.791Z,1510149196.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:16.807Z,1510149196.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:16.885Z,1510149196.885 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T13:53:16.885Z,1510149196.885 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T13:53:16.913Z,1510149196.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:16.949Z,1510149196.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:17.082Z,1510149197.082 [Rowe_600LCM](INFO): Initializing
2017-11-08T13:53:17.082Z,1510149197.082 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T13:53:17.082Z,1510149197.082 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T13:53:17.082Z,1510149197.082 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T13:53:17.083Z,1510149197.083 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T13:53:17.330Z,1510149197.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:17.364Z,1510149197.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:17.441Z,1510149197.441 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:53:17.485Z,1510149197.485 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T13:53:17.572Z,1510149197.572 [Rowe_600LCM](INFO): Powering down
2017-11-08T13:53:17.742Z,1510149197.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:17.761Z,1510149197.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:18.126Z,1510149198.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:18.153Z,1510149198.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:18.518Z,1510149198.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:18.552Z,1510149198.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:18.921Z,1510149198.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:18.954Z,1510149198.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:19.045Z,1510149199.045 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T13:53:19.045Z,1510149199.045 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T13:53:19.190Z,1510149199.190 [Rowe_600LCM](INFO): Initializing
2017-11-08T13:53:19.190Z,1510149199.190 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T13:53:19.190Z,1510149199.190 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T13:53:19.190Z,1510149199.190 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T13:53:19.190Z,1510149199.190 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T13:53:19.349Z,1510149199.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:19.366Z,1510149199.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:19.449Z,1510149199.449 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:53:19.593Z,1510149199.593 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T13:53:19.677Z,1510149199.677 [Rowe_600LCM](INFO): Powering down
2017-11-08T13:53:19.750Z,1510149199.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:19.770Z,1510149199.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:20.414Z,1510149200.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:20.430Z,1510149200.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:20.574Z,1510149200.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:20.598Z,1510149200.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:20.986Z,1510149200.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:21.013Z,1510149201.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:21.097Z,1510149201.097 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T13:53:21.097Z,1510149201.097 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T13:53:21.294Z,1510149201.294 [Rowe_600LCM](INFO): Initializing
2017-11-08T13:53:21.295Z,1510149201.295 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T13:53:21.295Z,1510149201.295 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T13:53:21.295Z,1510149201.295 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T13:53:21.295Z,1510149201.295 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T13:53:21.400Z,1510149201.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:21.417Z,1510149201.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:21.497Z,1510149201.497 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:53:21.697Z,1510149201.697 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T13:53:21.800Z,1510149201.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:21.863Z,1510149201.863 [Rowe_600LCM](INFO): Powering down
2017-11-08T13:53:21.881Z,1510149201.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:22.173Z,1510149202.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:22.190Z,1510149202.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:22.576Z,1510149202.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:22.601Z,1510149202.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:22.994Z,1510149202.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:23.024Z,1510149203.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:23.102Z,1510149203.102 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T13:53:23.102Z,1510149203.102 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T13:53:23.372Z,1510149203.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:23.389Z,1510149203.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:23.478Z,1510149203.478 [Rowe_600LCM](INFO): Initializing
2017-11-08T13:53:23.478Z,1510149203.478 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T13:53:23.478Z,1510149203.478 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T13:53:23.478Z,1510149203.478 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T13:53:23.478Z,1510149203.478 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T13:53:23.483Z,1510149203.483 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:53:23.483Z,1510149203.483 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T13:53:23.772Z,1510149203.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:23.789Z,1510149203.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:23.881Z,1510149203.881 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T13:53:23.978Z,1510149203.978 [Rowe_600LCM](INFO): Powering down
2017-11-08T13:53:24.185Z,1510149204.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:24.219Z,1510149204.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:24.870Z,1510149204.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:24.891Z,1510149204.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:25.034Z,1510149205.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:25.066Z,1510149205.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:25.460Z,1510149205.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:25.477Z,1510149205.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:25.861Z,1510149205.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:25.880Z,1510149205.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:26.260Z,1510149206.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:26.277Z,1510149206.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:26.640Z,1510149206.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:26.672Z,1510149206.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:27.039Z,1510149207.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:27.055Z,1510149207.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:27.439Z,1510149207.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:27.456Z,1510149207.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:27.844Z,1510149207.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:27.883Z,1510149207.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:28.276Z,1510149208.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:28.341Z,1510149208.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:28.650Z,1510149208.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:28.678Z,1510149208.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:29.338Z,1510149209.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:29.387Z,1510149209.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:29.505Z,1510149209.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:29.541Z,1510149209.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:29.931Z,1510149209.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:29.991Z,1510149209.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:30.332Z,1510149210.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:30.348Z,1510149210.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:30.732Z,1510149210.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:30.748Z,1510149210.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:31.111Z,1510149211.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:31.145Z,1510149211.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:31.511Z,1510149211.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:31.543Z,1510149211.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:31.912Z,1510149211.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:31.938Z,1510149211.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:32.338Z,1510149212.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:32.360Z,1510149212.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:32.711Z,1510149212.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:32.744Z,1510149212.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:33.132Z,1510149213.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:33.149Z,1510149213.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:33.806Z,1510149213.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:33.835Z,1510149213.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:33.951Z,1510149213.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:33.991Z,1510149213.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:34.376Z,1510149214.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:34.393Z,1510149214.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:34.772Z,1510149214.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:34.789Z,1510149214.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:35.162Z,1510149215.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:35.194Z,1510149215.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:35.556Z,1510149215.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:35.587Z,1510149215.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:35.983Z,1510149215.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:35.000Z,1510149216.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:36.372Z,1510149216.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:36.395Z,1510149216.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:37.046Z,1510149217.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:37.062Z,1510149217.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:37.199Z,1510149217.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:37.243Z,1510149217.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:37.610Z,1510149217.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:37.636Z,1510149217.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:38.013Z,1510149218.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:38.077Z,1510149218.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:38.410Z,1510149218.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:38.436Z,1510149218.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:38.803Z,1510149218.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:38.838Z,1510149218.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:39.199Z,1510149219.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:39.216Z,1510149219.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:39.600Z,1510149219.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:39.638Z,1510149219.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:40.032Z,1510149220.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:40.048Z,1510149220.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:40.395Z,1510149220.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:40.415Z,1510149220.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:40.809Z,1510149220.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:40.843Z,1510149220.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:41.497Z,1510149221.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:41.514Z,1510149221.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:41.647Z,1510149221.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:41.691Z,1510149221.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:42.061Z,1510149222.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:42.092Z,1510149222.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:42.461Z,1510149222.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:42.489Z,1510149222.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:42.861Z,1510149222.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:42.889Z,1510149222.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:43.244Z,1510149223.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:43.260Z,1510149223.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:43.646Z,1510149223.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:43.687Z,1510149223.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:44.069Z,1510149224.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:44.094Z,1510149224.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:44.461Z,1510149224.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:44.492Z,1510149224.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:45.137Z,1510149225.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:45.153Z,1510149225.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:45.257Z,1510149225.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:45.303Z,1510149225.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:45.682Z,1510149225.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:45.703Z,1510149225.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:46.084Z,1510149226.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:46.101Z,1510149226.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:46.485Z,1510149226.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:46.505Z,1510149226.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:46.867Z,1510149226.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:46.901Z,1510149226.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:47.263Z,1510149227.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:47.298Z,1510149227.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:47.664Z,1510149227.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:47.701Z,1510149227.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:48.101Z,1510149228.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:48.118Z,1510149228.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:48.463Z,1510149228.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:48.511Z,1510149228.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:48.877Z,1510149228.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:48.906Z,1510149228.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:49.558Z,1510149229.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:49.616Z,1510149229.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:49.742Z,1510149229.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:49.764Z,1510149229.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:50.151Z,1510149230.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:50.228Z,1510149230.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:50.546Z,1510149230.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:50.566Z,1510149230.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:50.952Z,1510149230.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:50.968Z,1510149230.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:51.332Z,1510149231.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:51.367Z,1510149231.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:51.727Z,1510149231.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:51.798Z,1510149231.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:52.158Z,1510149232.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:52.175Z,1510149232.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:52.555Z,1510149232.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:52.611Z,1510149232.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:53.221Z,1510149233.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:53.250Z,1510149233.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:53.367Z,1510149233.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:53.405Z,1510149233.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:53.778Z,1510149233.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:53.804Z,1510149233.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:54.178Z,1510149234.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:54.203Z,1510149234.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:54.574Z,1510149234.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:54.606Z,1510149234.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:54.963Z,1510149234.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:54.980Z,1510149234.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:55.363Z,1510149235.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:55.380Z,1510149235.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:55.760Z,1510149235.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:55.783Z,1510149235.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:56.186Z,1510149236.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:56.215Z,1510149236.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:56.563Z,1510149236.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:56.580Z,1510149236.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:56.974Z,1510149236.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:57.009Z,1510149237.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:57.651Z,1510149237.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:57.666Z,1510149237.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:57.777Z,1510149237.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:57.813Z,1510149237.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:58.200Z,1510149238.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:58.217Z,1510149238.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:58.604Z,1510149238.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:58.620Z,1510149238.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:58.990Z,1510149238.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:59.022Z,1510149239.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:59.383Z,1510149239.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:59.419Z,1510149239.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:53:59.780Z,1510149239.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:53:59.814Z,1510149239.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:00.213Z,1510149240.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:00.229Z,1510149240.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:00.605Z,1510149240.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:00.663Z,1510149240.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:01.269Z,1510149241.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:01.313Z,1510149241.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:01.425Z,1510149241.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:01.450Z,1510149241.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:01.842Z,1510149241.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:01.874Z,1510149241.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:02.241Z,1510149242.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:02.271Z,1510149242.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:02.652Z,1510149242.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:02.668Z,1510149242.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:03.031Z,1510149243.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:03.065Z,1510149243.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:03.432Z,1510149243.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:03.468Z,1510149243.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:03.832Z,1510149243.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:03.867Z,1510149243.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:04.260Z,1510149244.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:04.276Z,1510149244.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:04.627Z,1510149244.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:04.643Z,1510149244.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:05.040Z,1510149245.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:05.066Z,1510149245.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:05.722Z,1510149245.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:05.739Z,1510149245.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:05.871Z,1510149245.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:05.910Z,1510149245.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:06.286Z,1510149246.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:06.316Z,1510149246.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:06.685Z,1510149246.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:06.716Z,1510149246.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:07.081Z,1510149247.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:07.114Z,1510149247.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:07.472Z,1510149247.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:07.488Z,1510149247.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:07.872Z,1510149247.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:07.888Z,1510149247.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:08.289Z,1510149248.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:08.319Z,1510149248.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:08.684Z,1510149248.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:08.717Z,1510149248.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:09.390Z,1510149249.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:09.426Z,1510149249.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:09.535Z,1510149249.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:09.579Z,1510149249.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:09.946Z,1510149249.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:09.968Z,1510149249.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:10.342Z,1510149250.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:10.374Z,1510149250.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:10.749Z,1510149250.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:10.780Z,1510149250.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:11.134Z,1510149251.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:11.162Z,1510149251.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:11.535Z,1510149251.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:11.551Z,1510149251.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:11.965Z,1510149251.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:11.981Z,1510149251.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:12.335Z,1510149252.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:12.398Z,1510149252.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:12.735Z,1510149252.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:12.807Z,1510149252.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:13.141Z,1510149253.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:13.158Z,1510149253.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:13.831Z,1510149253.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:13.883Z,1510149253.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:13.999Z,1510149253.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:14.036Z,1510149254.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:14.421Z,1510149254.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:14.480Z,1510149254.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:14.820Z,1510149254.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:14.837Z,1510149254.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:15.214Z,1510149255.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:15.246Z,1510149255.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:15.602Z,1510149255.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:15.618Z,1510149255.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:15.998Z,1510149255.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:16.014Z,1510149256.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:16.402Z,1510149256.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:16.418Z,1510149256.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:16.803Z,1510149256.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:16.823Z,1510149256.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:17.226Z,1510149257.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:17.255Z,1510149257.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:17.613Z,1510149257.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:17.649Z,1510149257.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:18.295Z,1510149258.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:18.311Z,1510149258.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:18.417Z,1510149258.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:18.455Z,1510149258.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:18.839Z,1510149258.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:18.859Z,1510149258.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:19.240Z,1510149259.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:19.256Z,1510149259.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:19.636Z,1510149259.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:19.652Z,1510149259.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:20.023Z,1510149260.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:20.048Z,1510149260.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:20.419Z,1510149260.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:20.450Z,1510149260.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:20.824Z,1510149260.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:20.849Z,1510149260.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:21.250Z,1510149261.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:21.271Z,1510149261.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:21.619Z,1510149261.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:21.647Z,1510149261.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:22.041Z,1510149262.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:22.057Z,1510149262.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:22.718Z,1510149262.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:22.768Z,1510149262.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:22.879Z,1510149262.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:22.927Z,1510149262.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:23.302Z,1510149263.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:23.318Z,1510149263.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:23.703Z,1510149263.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:23.723Z,1510149263.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:24.100Z,1510149264.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:24.131Z,1510149264.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:24.479Z,1510149264.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:24.508Z,1510149264.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:24.880Z,1510149264.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:24.909Z,1510149264.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:25.306Z,1510149265.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:25.323Z,1510149265.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:25.695Z,1510149265.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:25.727Z,1510149265.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:26.406Z,1510149266.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:26.421Z,1510149266.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:26.541Z,1510149266.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:26.566Z,1510149266.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:26.954Z,1510149266.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:26.971Z,1510149266.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:27.358Z,1510149267.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:27.376Z,1510149267.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:27.755Z,1510149267.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:27.772Z,1510149267.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:28.145Z,1510149268.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:28.162Z,1510149268.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:28.546Z,1510149268.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:28.562Z,1510149268.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:28.965Z,1510149268.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:28.990Z,1510149268.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:29.343Z,1510149269.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:29.364Z,1510149269.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:29.745Z,1510149269.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:29.762Z,1510149269.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:30.158Z,1510149270.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:30.175Z,1510149270.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:30.836Z,1510149270.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:30.853Z,1510149270.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:30.963Z,1510149270.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:30.984Z,1510149270.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:31.386Z,1510149271.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:31.419Z,1510149271.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:31.786Z,1510149271.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:31.816Z,1510149271.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:32.178Z,1510149272.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:32.210Z,1510149272.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:32.573Z,1510149272.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:32.605Z,1510149272.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:32.998Z,1510149272.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:33.015Z,1510149273.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:33.382Z,1510149273.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:33.413Z,1510149273.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:34.059Z,1510149274.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:34.075Z,1510149274.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:34.183Z,1510149274.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:34.220Z,1510149274.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:34.594Z,1510149274.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:34.683Z,1510149274.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:34.997Z,1510149274.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:35.026Z,1510149275.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:35.394Z,1510149275.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:35.426Z,1510149275.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:35.783Z,1510149275.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:35.831Z,1510149275.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:36.184Z,1510149276.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:36.199Z,1510149276.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:36.585Z,1510149276.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:36.631Z,1510149276.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:37.020Z,1510149277.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:37.036Z,1510149277.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:37.384Z,1510149277.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:37.399Z,1510149277.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:37.793Z,1510149277.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:37.826Z,1510149277.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:38.478Z,1510149278.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:38.494Z,1510149278.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:38.594Z,1510149278.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:38.618Z,1510149278.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:39.010Z,1510149279.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:39.043Z,1510149279.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:39.421Z,1510149279.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:39.437Z,1510149279.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:39.822Z,1510149279.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:39.838Z,1510149279.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:40.200Z,1510149280.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:40.233Z,1510149280.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:40.600Z,1510149280.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:40.633Z,1510149280.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:41.032Z,1510149281.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:41.049Z,1510149281.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:41.414Z,1510149281.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:41.440Z,1510149281.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:42.087Z,1510149282.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:42.106Z,1510149282.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:42.205Z,1510149282.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:42.233Z,1510149282.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:42.622Z,1510149282.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:42.654Z,1510149282.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:43.032Z,1510149283.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:43.049Z,1510149283.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:43.422Z,1510149283.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:43.448Z,1510149283.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:43.811Z,1510149283.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:43.847Z,1510149283.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:44.211Z,1510149284.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:44.247Z,1510149284.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:44.612Z,1510149284.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:44.663Z,1510149284.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:45.045Z,1510149285.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:45.061Z,1510149285.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:45.412Z,1510149285.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:45.445Z,1510149285.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:45.825Z,1510149285.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:45.853Z,1510149285.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:46.501Z,1510149286.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:46.526Z,1510149286.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:46.665Z,1510149286.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:46.694Z,1510149286.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:47.078Z,1510149287.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:47.104Z,1510149287.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:47.478Z,1510149287.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:47.507Z,1510149287.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:47.878Z,1510149287.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:47.910Z,1510149287.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:48.264Z,1510149288.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:48.289Z,1510149288.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:48.671Z,1510149288.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:48.706Z,1510149288.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:49.097Z,1510149289.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:49.113Z,1510149289.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:49.477Z,1510149289.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:49.512Z,1510149289.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:50.158Z,1510149290.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:50.175Z,1510149290.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:50.318Z,1510149290.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:50.352Z,1510149290.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:50.694Z,1510149290.694 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T13:54:50.695Z,1510149290.695 [NAL9602] Data Fault, FailCount= 4
2017-11-08T13:54:50.695Z,1510149290.695 [NAL9602](ERROR): Data Fault
2017-11-08T13:54:50.713Z,1510149290.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:50.748Z,1510149290.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:50.837Z,1510149290.837 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T13:54:51.090Z,1510149291.090 [NAL9602](INFO): Powering down
2017-11-08T13:54:51.117Z,1510149291.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:51.152Z,1510149291.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:51.515Z,1510149291.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:51.536Z,1510149291.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:51.915Z,1510149291.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:51.935Z,1510149291.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:52.033Z,1510149292.033 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T13:54:52.033Z,1510149292.033 [NAL9602] No Fault, FailCount= 4
2017-11-08T13:54:52.313Z,1510149292.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:52.329Z,1510149292.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:52.714Z,1510149292.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:52.732Z,1510149292.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:53.110Z,1510149293.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:53.135Z,1510149293.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:53.518Z,1510149293.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:53.534Z,1510149293.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:53.917Z,1510149293.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:53.934Z,1510149293.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:54.317Z,1510149294.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:54.334Z,1510149294.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:54.711Z,1510149294.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:54.742Z,1510149294.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:55.112Z,1510149295.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:55.133Z,1510149295.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:55.517Z,1510149295.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:55.533Z,1510149295.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:55.915Z,1510149295.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:55.935Z,1510149295.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:56.317Z,1510149296.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:56.383Z,1510149296.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:56.714Z,1510149296.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:56.794Z,1510149296.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:57.117Z,1510149297.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:57.133Z,1510149297.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:57.517Z,1510149297.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:57.534Z,1510149297.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:57.914Z,1510149297.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:57.972Z,1510149297.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:58.316Z,1510149298.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:58.333Z,1510149298.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:58.713Z,1510149298.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:58.773Z,1510149298.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:59.114Z,1510149299.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:59.136Z,1510149299.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:59.512Z,1510149299.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:59.528Z,1510149299.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:54:59.913Z,1510149299.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:54:59.929Z,1510149299.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:00.317Z,1510149300.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:00.333Z,1510149300.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:00.713Z,1510149300.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:00.728Z,1510149300.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:01.114Z,1510149301.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:01.130Z,1510149301.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:01.517Z,1510149301.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:01.533Z,1510149301.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:01.913Z,1510149301.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:01.935Z,1510149301.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:02.317Z,1510149302.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:02.333Z,1510149302.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:02.721Z,1510149302.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:02.737Z,1510149302.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:03.113Z,1510149303.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:03.129Z,1510149303.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:03.518Z,1510149303.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:03.534Z,1510149303.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:03.915Z,1510149303.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:03.945Z,1510149303.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:04.314Z,1510149304.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:04.335Z,1510149304.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:04.710Z,1510149304.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:04.736Z,1510149304.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:05.115Z,1510149305.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:05.137Z,1510149305.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:05.512Z,1510149305.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:05.529Z,1510149305.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:05.912Z,1510149305.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:05.929Z,1510149305.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:06.316Z,1510149306.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:06.333Z,1510149306.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:06.712Z,1510149306.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:06.728Z,1510149306.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:07.113Z,1510149307.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:07.173Z,1510149307.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:07.514Z,1510149307.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:07.535Z,1510149307.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:07.912Z,1510149307.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:07.935Z,1510149307.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:08.317Z,1510149308.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:08.333Z,1510149308.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:08.714Z,1510149308.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:08.735Z,1510149308.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:09.113Z,1510149309.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:09.128Z,1510149309.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:09.517Z,1510149309.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:09.533Z,1510149309.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:09.914Z,1510149309.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:09.935Z,1510149309.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:10.312Z,1510149310.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:10.328Z,1510149310.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:10.712Z,1510149310.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:10.729Z,1510149310.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:11.116Z,1510149311.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:11.133Z,1510149311.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:11.512Z,1510149311.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:11.535Z,1510149311.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:11.912Z,1510149311.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:11.929Z,1510149311.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:12.316Z,1510149312.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:12.333Z,1510149312.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:12.712Z,1510149312.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:12.728Z,1510149312.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:13.113Z,1510149313.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:13.130Z,1510149313.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:13.521Z,1510149313.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:13.537Z,1510149313.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:13.907Z,1510149313.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:13.931Z,1510149313.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:14.317Z,1510149314.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:14.333Z,1510149314.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:14.717Z,1510149314.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:14.733Z,1510149314.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:15.116Z,1510149315.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:15.132Z,1510149315.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:15.517Z,1510149315.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:15.533Z,1510149315.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:15.918Z,1510149315.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:15.934Z,1510149315.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:16.317Z,1510149316.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:16.339Z,1510149316.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:16.716Z,1510149316.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:16.733Z,1510149316.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:17.117Z,1510149317.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:17.133Z,1510149317.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:17.516Z,1510149317.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:17.533Z,1510149317.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:17.907Z,1510149317.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:17.938Z,1510149317.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:18.316Z,1510149318.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:18.332Z,1510149318.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:18.716Z,1510149318.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:18.739Z,1510149318.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:19.107Z,1510149319.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:19.199Z,1510149319.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:19.511Z,1510149319.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:19.540Z,1510149319.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:19.907Z,1510149319.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:19.935Z,1510149319.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:20.320Z,1510149320.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:20.377Z,1510149320.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:20.710Z,1510149320.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:20.740Z,1510149320.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:21.106Z,1510149321.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:21.157Z,1510149321.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:21.494Z,1510149321.494 [NAL9602](INFO): Powering up NAL9602
2017-11-08T13:55:21.512Z,1510149321.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:21.553Z,1510149321.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:21.911Z,1510149321.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:21.941Z,1510149321.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:22.307Z,1510149322.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:22.335Z,1510149322.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:22.707Z,1510149322.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:22.738Z,1510149322.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:23.110Z,1510149323.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:23.142Z,1510149323.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:23.511Z,1510149323.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:23.535Z,1510149323.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:23.911Z,1510149323.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:23.936Z,1510149323.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:24.310Z,1510149324.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:24.340Z,1510149324.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:24.707Z,1510149324.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:24.731Z,1510149324.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:25.107Z,1510149325.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:25.139Z,1510149325.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:25.511Z,1510149325.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:25.540Z,1510149325.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:25.910Z,1510149325.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:25.934Z,1510149325.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:26.311Z,1510149326.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:26.335Z,1510149326.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:26.711Z,1510149326.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:26.740Z,1510149326.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:27.107Z,1510149327.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:27.144Z,1510149327.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:27.507Z,1510149327.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:27.535Z,1510149327.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:27.911Z,1510149327.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:27.947Z,1510149327.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:28.307Z,1510149328.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:28.322Z,1510149328.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:28.707Z,1510149328.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:28.724Z,1510149328.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:29.109Z,1510149329.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:29.267Z,1510149329.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:29.508Z,1510149329.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:29.591Z,1510149329.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:29.907Z,1510149329.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:29.927Z,1510149329.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:30.311Z,1510149330.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:30.332Z,1510149330.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:30.715Z,1510149330.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:30.731Z,1510149330.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:31.111Z,1510149331.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:31.128Z,1510149331.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:31.511Z,1510149331.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:31.531Z,1510149331.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:31.915Z,1510149331.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:31.931Z,1510149331.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:32.326Z,1510149332.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:32.359Z,1510149332.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:32.698Z,1510149332.698 [NAL9602](INFO): NAL9602 initialized
2017-11-08T13:55:32.715Z,1510149332.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:32.736Z,1510149332.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:33.114Z,1510149333.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:33.130Z,1510149333.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:33.530Z,1510149333.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:33.561Z,1510149333.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:33.921Z,1510149333.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:33.938Z,1510149333.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:34.325Z,1510149334.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:34.361Z,1510149334.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:34.715Z,1510149334.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:34.735Z,1510149334.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:35.115Z,1510149335.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:35.132Z,1510149335.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:35.515Z,1510149335.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:35.530Z,1510149335.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:35.934Z,1510149335.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:35.964Z,1510149335.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:36.326Z,1510149336.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:36.361Z,1510149336.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:37.001Z,1510149337.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:37.017Z,1510149337.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:37.132Z,1510149337.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:37.163Z,1510149337.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:37.538Z,1510149337.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:37.570Z,1510149337.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:37.949Z,1510149337.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:37.971Z,1510149337.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:38.346Z,1510149338.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:38.369Z,1510149338.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:38.727Z,1510149338.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:38.760Z,1510149338.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:39.127Z,1510149339.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:39.144Z,1510149339.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:39.527Z,1510149339.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:39.568Z,1510149339.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:39.961Z,1510149339.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:39.978Z,1510149339.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:40.331Z,1510149340.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:40.347Z,1510149340.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:40.742Z,1510149340.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:40.797Z,1510149340.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:41.460Z,1510149341.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:41.497Z,1510149341.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:41.636Z,1510149341.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:41.683Z,1510149341.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:42.050Z,1510149342.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:42.107Z,1510149342.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:42.446Z,1510149342.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:42.477Z,1510149342.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:42.854Z,1510149342.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:42.923Z,1510149342.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:43.239Z,1510149343.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:43.256Z,1510149343.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:43.636Z,1510149343.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:43.656Z,1510149343.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:44.062Z,1510149344.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:44.086Z,1510149344.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:44.453Z,1510149344.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:44.485Z,1510149344.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:45.127Z,1510149345.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:45.144Z,1510149345.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:45.245Z,1510149345.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:45.302Z,1510149345.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:45.662Z,1510149345.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:45.694Z,1510149345.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:46.070Z,1510149346.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:46.092Z,1510149346.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:46.461Z,1510149346.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:46.502Z,1510149346.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:46.851Z,1510149346.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:46.895Z,1510149346.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:47.251Z,1510149347.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:47.286Z,1510149347.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:47.653Z,1510149347.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:47.691Z,1510149347.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:48.084Z,1510149348.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:48.105Z,1510149348.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:48.448Z,1510149348.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:48.464Z,1510149348.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:48.862Z,1510149348.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:48.901Z,1510149348.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:49.545Z,1510149349.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:49.561Z,1510149349.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:49.705Z,1510149349.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:49.742Z,1510149349.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:50.129Z,1510149350.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:50.145Z,1510149350.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:50.520Z,1510149350.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:50.548Z,1510149350.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:50.919Z,1510149350.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:50.967Z,1510149350.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:51.306Z,1510149351.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:51.322Z,1510149351.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:51.738Z,1510149351.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:51.755Z,1510149351.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:52.120Z,1510149352.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:52.156Z,1510149352.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:52.795Z,1510149352.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:52.816Z,1510149352.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:52.918Z,1510149352.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:52.942Z,1510149352.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:53.340Z,1510149353.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:53.357Z,1510149353.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:53.748Z,1510149353.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:53.764Z,1510149353.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:54.141Z,1510149354.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:54.158Z,1510149354.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:54.524Z,1510149354.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:54.558Z,1510149354.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:54.923Z,1510149354.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:54.954Z,1510149354.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:55.327Z,1510149355.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:55.354Z,1510149355.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:55.755Z,1510149355.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:55.777Z,1510149355.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:56.124Z,1510149356.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:56.154Z,1510149356.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:56.546Z,1510149356.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:56.562Z,1510149356.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:57.222Z,1510149357.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:57.250Z,1510149357.250 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:57.250Z,1510149357.250 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2017-11-08T13:55:57.250Z,1510149357.250 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T13:55:57.252Z,1510149357.252 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:57.252Z,1510149357.252 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2017-11-08T13:55:57.252Z,1510149357.252 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T13:55:57.254Z,1510149357.254 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:57.254Z,1510149357.254 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-11-08T13:55:57.254Z,1510149357.254 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T13:55:57.337Z,1510149357.337 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T13:55:57.338Z,1510149357.338 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T13:55:57.338Z,1510149357.338 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T13:55:57.368Z,1510149357.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:57.489Z,1510149357.489 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T13:55:57.489Z,1510149357.489 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2017-11-08T13:55:57.489Z,1510149357.489 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T13:55:57.489Z,1510149357.489 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2017-11-08T13:55:57.490Z,1510149357.490 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T13:55:57.490Z,1510149357.490 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-11-08T13:55:57.778Z,1510149357.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:57.794Z,1510149357.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T13:55:57.794Z,1510149357.794 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:55:57.795Z,1510149357.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:55:57.795Z,1510149357.795 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T13:55:57.795Z,1510149357.795 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:55:57.796Z,1510149357.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:55:57.796Z,1510149357.796 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T13:55:57.797Z,1510149357.797 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:55:57.797Z,1510149357.797 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:55:58.182Z,1510149358.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:58.210Z,1510149358.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2017-11-08T13:55:58.211Z,1510149358.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:58.588Z,1510149358.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:58.605Z,1510149358.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2017-11-08T13:55:58.606Z,1510149358.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:58.975Z,1510149358.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:58.996Z,1510149358.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2017-11-08T13:55:58.997Z,1510149358.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:59.373Z,1510149359.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:59.389Z,1510149359.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2017-11-08T13:55:59.390Z,1510149359.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:55:59.801Z,1510149359.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:55:59.837Z,1510149359.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2017-11-08T13:55:59.838Z,1510149359.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:00.190Z,1510149360.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:00.206Z,1510149360.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2017-11-08T13:56:00.207Z,1510149360.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:00.854Z,1510149360.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:00.885Z,1510149360.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T13:56:00.886Z,1510149360.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:00.000Z,1510149361.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:01.016Z,1510149361.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2017-11-08T13:56:01.017Z,1510149361.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:01.422Z,1510149361.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:01.453Z,1510149361.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2017-11-08T13:56:01.454Z,1510149361.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:01.821Z,1510149361.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:01.852Z,1510149361.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2017-11-08T13:56:01.853Z,1510149361.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:02.216Z,1510149362.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:02.250Z,1510149362.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2017-11-08T13:56:02.251Z,1510149362.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:02.608Z,1510149362.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:02.624Z,1510149362.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2017-11-08T13:56:02.641Z,1510149362.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:03.007Z,1510149363.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:03.085Z,1510149363.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2017-11-08T13:56:03.086Z,1510149363.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:03.411Z,1510149363.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:03.471Z,1510149363.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-11-08T13:56:03.472Z,1510149363.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:03.834Z,1510149363.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:03.863Z,1510149363.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-08T13:56:03.864Z,1510149363.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:04.202Z,1510149364.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:04.281Z,1510149364.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2017-11-08T13:56:04.282Z,1510149364.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:04.618Z,1510149364.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:04.755Z,1510149364.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2017-11-08T13:56:04.756Z,1510149364.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:05.303Z,1510149365.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:05.348Z,1510149365.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T13:56:05.349Z,1510149365.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:05.492Z,1510149365.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:05.531Z,1510149365.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2017-11-08T13:56:05.532Z,1510149365.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:05.902Z,1510149365.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:05.928Z,1510149365.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2017-11-08T13:56:05.929Z,1510149365.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:06.302Z,1510149366.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:06.327Z,1510149366.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2017-11-08T13:56:06.328Z,1510149366.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:06.698Z,1510149366.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:06.730Z,1510149366.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2017-11-08T13:56:06.730Z,1510149366.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:07.087Z,1510149367.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:07.104Z,1510149367.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2017-11-08T13:56:07.105Z,1510149367.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:07.488Z,1510149367.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:07.504Z,1510149367.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2017-11-08T13:56:07.505Z,1510149367.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:07.910Z,1510149367.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:07.934Z,1510149367.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2017-11-08T13:56:07.935Z,1510149367.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:08.297Z,1510149368.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:08.329Z,1510149368.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2017-11-08T13:56:08.330Z,1510149368.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:09.169Z,1510149369.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:09.185Z,1510149369.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2017-11-08T13:56:09.186Z,1510149369.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:09.299Z,1510149369.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:09.315Z,1510149369.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T13:56:09.316Z,1510149369.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:09.715Z,1510149369.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:09.741Z,1510149369.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T13:56:09.742Z,1510149369.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:10.119Z,1510149370.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:10.143Z,1510149370.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T13:56:10.144Z,1510149370.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:10.517Z,1510149370.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:10.543Z,1510149370.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T13:56:10.544Z,1510149370.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:10.908Z,1510149370.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:10.943Z,1510149370.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T13:56:10.944Z,1510149370.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:11.300Z,1510149371.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:11.341Z,1510149371.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T13:56:11.342Z,1510149371.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:11.736Z,1510149371.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:11.752Z,1510149371.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T13:56:11.753Z,1510149371.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:12.105Z,1510149372.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:12.121Z,1510149372.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T13:56:12.122Z,1510149372.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:12.521Z,1510149372.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:12.547Z,1510149372.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T13:56:12.548Z,1510149372.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:13.191Z,1510149373.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:13.208Z,1510149373.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T13:56:13.209Z,1510149373.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:13.318Z,1510149373.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:13.358Z,1510149373.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T13:56:13.359Z,1510149373.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:13.730Z,1510149373.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:13.800Z,1510149373.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-08T13:56:13.801Z,1510149373.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:14.141Z,1510149374.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:14.157Z,1510149374.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T13:56:14.158Z,1510149374.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:14.531Z,1510149374.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:14.554Z,1510149374.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T13:56:14.555Z,1510149374.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:14.916Z,1510149374.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:14.931Z,1510149374.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T13:56:14.932Z,1510149374.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:15.324Z,1510149375.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:15.356Z,1510149375.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T13:56:15.357Z,1510149375.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:15.748Z,1510149375.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:15.764Z,1510149375.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T13:56:15.765Z,1510149375.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:16.134Z,1510149376.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:16.158Z,1510149376.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T13:56:16.159Z,1510149376.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:16.807Z,1510149376.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:16.823Z,1510149376.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T13:56:16.824Z,1510149376.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:16.935Z,1510149376.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:16.972Z,1510149376.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-08T13:56:16.973Z,1510149376.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:17.349Z,1510149377.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:17.371Z,1510149377.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:17.760Z,1510149377.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:17.777Z,1510149377.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:18.156Z,1510149378.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:18.176Z,1510149378.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:18.531Z,1510149378.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:18.566Z,1510149378.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:18.936Z,1510149378.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:18.970Z,1510149378.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:19.340Z,1510149379.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:19.372Z,1510149379.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:19.762Z,1510149379.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:19.779Z,1510149379.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:20.139Z,1510149380.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:20.166Z,1510149380.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:20.560Z,1510149380.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:20.577Z,1510149380.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:21.226Z,1510149381.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:21.262Z,1510149381.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:21.377Z,1510149381.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:21.413Z,1510149381.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:21.786Z,1510149381.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:21.820Z,1510149381.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:22.182Z,1510149382.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:22.218Z,1510149382.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:22.582Z,1510149382.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:22.615Z,1510149382.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:22.971Z,1510149382.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:22.987Z,1510149382.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:23.371Z,1510149383.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:23.387Z,1510149383.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:23.794Z,1510149383.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:23.819Z,1510149383.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:24.182Z,1510149384.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:24.198Z,1510149384.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:24.853Z,1510149384.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:24.869Z,1510149384.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:24.987Z,1510149384.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:25.027Z,1510149385.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:25.408Z,1510149385.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:25.471Z,1510149385.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:25.808Z,1510149385.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:25.824Z,1510149385.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:26.198Z,1510149386.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:26.263Z,1510149386.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:26.588Z,1510149386.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:26.604Z,1510149386.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:26.988Z,1510149386.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:27.004Z,1510149387.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:27.389Z,1510149387.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:27.444Z,1510149387.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:27.820Z,1510149387.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:27.836Z,1510149387.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:28.187Z,1510149388.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:28.240Z,1510149388.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:28.601Z,1510149388.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:28.630Z,1510149388.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:29.277Z,1510149389.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:29.293Z,1510149389.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:29.393Z,1510149389.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:29.421Z,1510149389.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:29.821Z,1510149389.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:29.837Z,1510149389.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:30.221Z,1510149390.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:30.237Z,1510149390.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:30.605Z,1510149390.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:30.638Z,1510149390.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:30.999Z,1510149390.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:31.024Z,1510149391.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:31.400Z,1510149391.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:31.416Z,1510149391.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:31.828Z,1510149391.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:31.844Z,1510149391.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:32.217Z,1510149392.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:32.247Z,1510149392.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:32.887Z,1510149392.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:32.908Z,1510149392.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:33.005Z,1510149393.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:33.033Z,1510149393.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:33.433Z,1510149393.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:33.449Z,1510149393.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:33.833Z,1510149393.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:33.849Z,1510149393.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:34.221Z,1510149394.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:34.254Z,1510149394.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:34.612Z,1510149394.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:34.648Z,1510149394.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:35.008Z,1510149395.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:35.024Z,1510149395.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:35.408Z,1510149395.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:35.424Z,1510149395.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:35.845Z,1510149395.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:35.861Z,1510149395.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:36.207Z,1510149396.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:36.247Z,1510149396.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:36.625Z,1510149396.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:36.695Z,1510149396.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:37.299Z,1510149397.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:37.319Z,1510149397.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:37.428Z,1510149397.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:37.458Z,1510149397.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:37.838Z,1510149397.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:37.860Z,1510149397.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:38.249Z,1510149398.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:38.266Z,1510149398.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:38.645Z,1510149398.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:38.661Z,1510149398.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:39.027Z,1510149399.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:39.060Z,1510149399.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:39.428Z,1510149399.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:39.466Z,1510149399.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:39.856Z,1510149399.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:39.879Z,1510149399.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:40.248Z,1510149400.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:40.265Z,1510149400.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:40.908Z,1510149400.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:40.924Z,1510149400.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:41.021Z,1510149401.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:41.068Z,1510149401.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:41.445Z,1510149401.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:41.462Z,1510149401.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:41.853Z,1510149401.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:41.870Z,1510149401.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:42.247Z,1510149402.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:42.264Z,1510149402.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:42.628Z,1510149402.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:42.660Z,1510149402.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:43.024Z,1510149403.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:43.048Z,1510149403.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:43.425Z,1510149403.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:43.457Z,1510149403.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:43.857Z,1510149403.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:43.874Z,1510149403.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:44.228Z,1510149404.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:44.309Z,1510149404.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:44.651Z,1510149404.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:44.709Z,1510149404.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:45.566Z,1510149405.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:45.605Z,1510149405.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:45.723Z,1510149405.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:45.762Z,1510149405.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:46.134Z,1510149406.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:46.161Z,1510149406.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:46.534Z,1510149406.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:46.564Z,1510149406.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:46.929Z,1510149406.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:46.964Z,1510149406.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:47.324Z,1510149407.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:47.357Z,1510149407.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:47.748Z,1510149407.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:47.764Z,1510149407.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:48.134Z,1510149408.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:48.167Z,1510149408.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:48.959Z,1510149408.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:49.033Z,1510149409.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:49.156Z,1510149409.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:49.204Z,1510149409.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:49.575Z,1510149409.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:49.592Z,1510149409.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:49.976Z,1510149409.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:50.021Z,1510149410.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:50.376Z,1510149410.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:50.392Z,1510149410.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:50.766Z,1510149410.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:50.821Z,1510149410.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:51.155Z,1510149411.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:51.180Z,1510149411.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:51.556Z,1510149411.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:51.583Z,1510149411.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:51.982Z,1510149411.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:52.004Z,1510149412.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:52.373Z,1510149412.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:52.389Z,1510149412.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:53.049Z,1510149413.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:53.072Z,1510149413.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:53.191Z,1510149413.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:53.231Z,1510149413.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:53.602Z,1510149413.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:53.635Z,1510149413.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:54.013Z,1510149414.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:54.030Z,1510149414.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:54.402Z,1510149414.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:54.427Z,1510149414.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:54.791Z,1510149414.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:54.828Z,1510149414.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:55.192Z,1510149415.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:55.225Z,1510149415.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:55.592Z,1510149415.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:55.630Z,1510149415.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:56.019Z,1510149416.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:56.035Z,1510149416.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:56.405Z,1510149416.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:56.439Z,1510149416.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:57.082Z,1510149417.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:57.098Z,1510149417.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:57.236Z,1510149417.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:57.279Z,1510149417.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:57.646Z,1510149417.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:57.678Z,1510149417.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:58.046Z,1510149418.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:58.077Z,1510149418.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:58.446Z,1510149418.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:58.477Z,1510149418.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:58.835Z,1510149418.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:58.896Z,1510149418.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:59.231Z,1510149419.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:59.247Z,1510149419.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:56:59.632Z,1510149419.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:56:59.649Z,1510149419.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:00.062Z,1510149420.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:00.083Z,1510149420.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:00.430Z,1510149420.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:00.447Z,1510149420.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:00.845Z,1510149420.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:00.878Z,1510149420.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:01.524Z,1510149421.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:01.540Z,1510149421.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:01.641Z,1510149421.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:01.687Z,1510149421.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:02.058Z,1510149422.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:02.094Z,1510149422.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:02.469Z,1510149422.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:02.485Z,1510149422.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:02.858Z,1510149422.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:02.891Z,1510149422.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:03.247Z,1510149423.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:03.280Z,1510149423.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:03.652Z,1510149423.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:03.688Z,1510149423.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:04.074Z,1510149424.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:04.096Z,1510149424.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:04.461Z,1510149424.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:04.490Z,1510149424.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:05.135Z,1510149425.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:05.151Z,1510149425.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:05.260Z,1510149425.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:05.294Z,1510149425.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:05.674Z,1510149425.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:05.696Z,1510149425.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:06.074Z,1510149426.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:06.096Z,1510149426.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:06.474Z,1510149426.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:06.506Z,1510149426.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:06.860Z,1510149426.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:06.897Z,1510149426.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:07.255Z,1510149427.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:07.292Z,1510149427.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:07.656Z,1510149427.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:07.694Z,1510149427.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:08.091Z,1510149428.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:08.110Z,1510149428.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:08.455Z,1510149428.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:08.497Z,1510149428.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:08.870Z,1510149428.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:08.902Z,1510149428.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:09.558Z,1510149429.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:09.590Z,1510149429.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:09.710Z,1510149429.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:09.753Z,1510149429.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:10.129Z,1510149430.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:10.145Z,1510149430.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:10.530Z,1510149430.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:10.572Z,1510149430.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:10.923Z,1510149430.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:10.976Z,1510149430.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:11.314Z,1510149431.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:11.339Z,1510149431.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:11.741Z,1510149431.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:11.796Z,1510149431.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:12.128Z,1510149432.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:12.154Z,1510149432.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:12.844Z,1510149432.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:12.904Z,1510149432.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:13.023Z,1510149433.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:13.060Z,1510149433.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:13.444Z,1510149433.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:13.460Z,1510149433.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:13.844Z,1510149433.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:13.860Z,1510149433.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:14.232Z,1510149434.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:14.259Z,1510149434.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:14.620Z,1510149434.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:14.662Z,1510149434.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:15.024Z,1510149435.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:15.051Z,1510149435.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:15.420Z,1510149435.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:15.436Z,1510149435.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:15.856Z,1510149435.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:15.879Z,1510149435.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:16.219Z,1510149436.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:16.235Z,1510149436.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:16.633Z,1510149436.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:16.666Z,1510149436.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:17.313Z,1510149437.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:17.335Z,1510149437.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:17.468Z,1510149437.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:17.505Z,1510149437.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:17.877Z,1510149437.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:17.919Z,1510149437.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:18.281Z,1510149438.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:18.314Z,1510149438.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:18.677Z,1510149438.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:18.700Z,1510149438.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:19.070Z,1510149439.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:19.086Z,1510149439.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:19.470Z,1510149439.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:19.486Z,1510149439.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:19.885Z,1510149439.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:19.910Z,1510149439.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:20.278Z,1510149440.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:20.293Z,1510149440.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:20.964Z,1510149440.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:21.022Z,1510149441.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:21.134Z,1510149441.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:21.179Z,1510149441.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:21.561Z,1510149441.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:21.577Z,1510149441.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:21.960Z,1510149441.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:21.977Z,1510149441.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:22.345Z,1510149442.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:22.372Z,1510149442.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:22.739Z,1510149442.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:22.776Z,1510149442.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:23.139Z,1510149443.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:23.174Z,1510149443.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:23.536Z,1510149443.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:23.552Z,1510149443.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:23.972Z,1510149443.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:23.988Z,1510149443.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:24.340Z,1510149444.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:24.356Z,1510149444.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:24.753Z,1510149444.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:24.787Z,1510149444.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:25.427Z,1510149445.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:25.443Z,1510149445.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:25.555Z,1510149445.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:25.599Z,1510149445.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:25.970Z,1510149445.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:25.991Z,1510149445.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:26.373Z,1510149446.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:26.388Z,1510149446.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:26.772Z,1510149446.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:26.788Z,1510149446.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:27.159Z,1510149447.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:27.192Z,1510149447.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:27.552Z,1510149447.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:27.582Z,1510149447.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:27.983Z,1510149447.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:28.004Z,1510149448.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:28.368Z,1510149448.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:28.391Z,1510149448.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:29.045Z,1510149449.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:29.081Z,1510149449.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:29.192Z,1510149449.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:29.232Z,1510149449.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:29.598Z,1510149449.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:29.626Z,1510149449.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:30.004Z,1510149450.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:30.035Z,1510149450.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:30.398Z,1510149450.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:30.443Z,1510149450.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:30.788Z,1510149450.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:30.821Z,1510149450.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:31.190Z,1510149451.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:31.212Z,1510149451.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:31.591Z,1510149451.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:31.608Z,1510149451.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:32.014Z,1510149452.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:32.037Z,1510149452.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:32.391Z,1510149452.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:32.407Z,1510149452.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:32.802Z,1510149452.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:32.834Z,1510149452.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:33.484Z,1510149453.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:33.551Z,1510149453.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:33.657Z,1510149453.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:33.703Z,1510149453.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:34.086Z,1510149454.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:34.103Z,1510149454.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:34.483Z,1510149454.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:34.509Z,1510149454.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:34.880Z,1510149454.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:34.897Z,1510149454.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:35.264Z,1510149455.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:35.300Z,1510149455.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:35.693Z,1510149455.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:35.715Z,1510149455.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:36.081Z,1510149456.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:36.101Z,1510149456.101 [BPC1](ERROR): Failed to receive battery data
2017-11-08T13:57:36.101Z,1510149456.101 [BPC1] Communications Fault, FailCount= 1
2017-11-08T13:57:36.101Z,1510149456.101 [BPC1](ERROR): Communications Fault
2017-11-08T13:57:36.151Z,1510149456.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:36.241Z,1510149456.241 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T13:57:36.758Z,1510149456.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:36.794Z,1510149456.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:36.910Z,1510149456.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:36.942Z,1510149456.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:37.325Z,1510149457.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:37.351Z,1510149457.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:37.433Z,1510149457.433 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T13:57:37.434Z,1510149457.434 [BPC1] No Fault, FailCount= 1
2017-11-08T13:57:37.723Z,1510149457.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:37.800Z,1510149457.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:38.119Z,1510149458.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:38.149Z,1510149458.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:38.510Z,1510149458.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:38.526Z,1510149458.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:38.911Z,1510149458.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:38.952Z,1510149458.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:39.308Z,1510149459.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:39.351Z,1510149459.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:39.740Z,1510149459.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:39.747Z,1510149459.747 [PNI_TCM](ERROR): CRC does not match. Expected:0x8972 got:0x34685
2017-11-08T13:57:39.776Z,1510149459.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:40.110Z,1510149460.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:40.126Z,1510149460.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:40.525Z,1510149460.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:40.558Z,1510149460.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:41.222Z,1510149461.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:41.255Z,1510149461.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:41.376Z,1510149461.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:41.410Z,1510149461.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:41.778Z,1510149461.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:41.807Z,1510149461.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:42.186Z,1510149462.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:42.210Z,1510149462.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:42.583Z,1510149462.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:42.606Z,1510149462.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:42.970Z,1510149462.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:42.987Z,1510149462.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:43.367Z,1510149463.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:43.383Z,1510149463.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:43.798Z,1510149463.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:43.814Z,1510149463.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:44.182Z,1510149464.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:44.204Z,1510149464.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:44.856Z,1510149464.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:44.872Z,1510149464.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:44.984Z,1510149464.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:45.014Z,1510149465.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:45.400Z,1510149465.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:45.416Z,1510149465.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:45.799Z,1510149465.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:45.850Z,1510149465.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:46.209Z,1510149466.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:46.231Z,1510149466.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:46.584Z,1510149466.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:46.612Z,1510149466.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:46.984Z,1510149466.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:47.019Z,1510149467.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:47.385Z,1510149467.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:47.417Z,1510149467.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:47.812Z,1510149467.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:47.828Z,1510149467.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:48.184Z,1510149468.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:48.221Z,1510149468.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:48.596Z,1510149468.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:48.623Z,1510149468.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:49.273Z,1510149469.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:49.290Z,1510149469.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:49.427Z,1510149469.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:49.443Z,1510149469.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:49.846Z,1510149469.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:49.878Z,1510149469.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:50.241Z,1510149470.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:50.268Z,1510149470.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:50.641Z,1510149470.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:50.674Z,1510149470.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:51.035Z,1510149471.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:51.076Z,1510149471.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:51.432Z,1510149471.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:51.448Z,1510149471.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:51.868Z,1510149471.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:51.893Z,1510149471.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:52.245Z,1510149472.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:52.273Z,1510149472.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:52.916Z,1510149472.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:52.933Z,1510149472.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:53.033Z,1510149473.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:53.084Z,1510149473.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:53.460Z,1510149473.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:53.477Z,1510149473.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:53.860Z,1510149473.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:53.883Z,1510149473.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:54.261Z,1510149474.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:54.278Z,1510149474.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:54.639Z,1510149474.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:54.674Z,1510149474.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:55.043Z,1510149475.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:55.073Z,1510149475.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:55.437Z,1510149475.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:55.469Z,1510149475.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:55.872Z,1510149475.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:55.889Z,1510149475.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:56.239Z,1510149476.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:56.255Z,1510149476.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:56.653Z,1510149476.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:56.703Z,1510149476.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:57.376Z,1510149477.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:57.396Z,1510149477.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:57.497Z,1510149477.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:57.542Z,1510149477.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:57.928Z,1510149477.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:57.944Z,1510149477.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:58.322Z,1510149478.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:58.381Z,1510149478.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:58.720Z,1510149478.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:58.736Z,1510149478.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:59.107Z,1510149479.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:59.156Z,1510149479.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:59.508Z,1510149479.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:59.539Z,1510149479.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:57:59.931Z,1510149479.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:57:59.948Z,1510149479.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:00.328Z,1510149480.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:00.351Z,1510149480.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:01.001Z,1510149481.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:01.030Z,1510149481.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:01.141Z,1510149481.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:01.191Z,1510149481.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:01.569Z,1510149481.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:01.585Z,1510149481.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:01.968Z,1510149481.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:01.985Z,1510149481.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:02.353Z,1510149482.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:02.380Z,1510149482.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:02.747Z,1510149482.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:02.784Z,1510149482.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:03.143Z,1510149483.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:03.159Z,1510149483.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:03.544Z,1510149483.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:03.560Z,1510149483.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:03.977Z,1510149483.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:04.110Z,1510149484.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:04.344Z,1510149484.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:04.430Z,1510149484.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:04.762Z,1510149484.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:04.800Z,1510149484.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:05.431Z,1510149485.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:05.447Z,1510149485.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:05.559Z,1510149485.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:05.607Z,1510149485.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:05.975Z,1510149485.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:05.992Z,1510149485.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:06.376Z,1510149486.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:06.392Z,1510149486.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:06.778Z,1510149486.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:06.810Z,1510149486.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:07.159Z,1510149487.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:07.222Z,1510149487.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:07.560Z,1510149487.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:07.586Z,1510149487.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:07.987Z,1510149487.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:08.008Z,1510149488.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:08.377Z,1510149488.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:08.400Z,1510149488.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:09.234Z,1510149489.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:09.250Z,1510149489.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:09.353Z,1510149489.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:09.387Z,1510149489.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:09.777Z,1510149489.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:09.794Z,1510149489.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:10.177Z,1510149490.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:10.194Z,1510149490.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:10.577Z,1510149490.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:10.593Z,1510149490.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:10.959Z,1510149490.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:10.991Z,1510149490.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:11.360Z,1510149491.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:11.391Z,1510149491.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:11.788Z,1510149491.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:11.804Z,1510149491.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:12.159Z,1510149492.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:12.199Z,1510149492.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:12.568Z,1510149492.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:12.595Z,1510149492.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:13.245Z,1510149493.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:13.262Z,1510149493.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:13.395Z,1510149493.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:13.411Z,1510149493.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:13.801Z,1510149493.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:13.839Z,1510149493.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:14.210Z,1510149494.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:14.237Z,1510149494.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:14.606Z,1510149494.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:14.636Z,1510149494.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:14.991Z,1510149494.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:15.007Z,1510149495.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:15.392Z,1510149495.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:15.409Z,1510149495.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:15.822Z,1510149495.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:15.839Z,1510149495.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:16.201Z,1510149496.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:16.237Z,1510149496.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:16.881Z,1510149496.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:16.901Z,1510149496.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:17.007Z,1510149497.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:17.042Z,1510149497.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:17.428Z,1510149497.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:17.444Z,1510149497.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:17.828Z,1510149497.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:17.844Z,1510149497.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:18.228Z,1510149498.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:18.296Z,1510149498.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:18.607Z,1510149498.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:18.623Z,1510149498.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:19.007Z,1510149499.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:19.027Z,1510149499.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:19.411Z,1510149499.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:19.439Z,1510149499.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:19.838Z,1510149499.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:19.873Z,1510149499.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:20.215Z,1510149500.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:20.252Z,1510149500.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:20.620Z,1510149500.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:20.675Z,1510149500.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:21.297Z,1510149501.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:21.317Z,1510149501.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:21.417Z,1510149501.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:21.470Z,1510149501.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:21.834Z,1510149501.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:21.866Z,1510149501.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:22.233Z,1510149502.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:22.267Z,1510149502.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:22.644Z,1510149502.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:22.660Z,1510149502.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:23.023Z,1510149503.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:23.057Z,1510149503.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:23.424Z,1510149503.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:23.461Z,1510149503.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:23.855Z,1510149503.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:23.871Z,1510149503.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:24.241Z,1510149504.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:24.264Z,1510149504.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:24.905Z,1510149504.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:24.922Z,1510149504.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:25.027Z,1510149505.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:25.062Z,1510149505.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:25.444Z,1510149505.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:25.460Z,1510149505.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:25.848Z,1510149505.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:25.863Z,1510149505.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:26.253Z,1510149506.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:26.270Z,1510149506.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:26.627Z,1510149506.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:26.664Z,1510149506.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:27.023Z,1510149507.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:27.039Z,1510149507.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:27.428Z,1510149507.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:27.466Z,1510149507.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:27.855Z,1510149507.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:27.871Z,1510149507.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:28.227Z,1510149508.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:28.243Z,1510149508.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:28.642Z,1510149508.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:28.672Z,1510149508.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:29.319Z,1510149509.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:29.335Z,1510149509.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:29.470Z,1510149509.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:29.531Z,1510149509.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:29.882Z,1510149509.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:29.921Z,1510149509.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:30.281Z,1510149510.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:30.297Z,1510149510.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:30.682Z,1510149510.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:30.698Z,1510149510.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:31.070Z,1510149511.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:31.087Z,1510149511.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:31.470Z,1510149511.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:31.486Z,1510149511.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:31.889Z,1510149511.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:31.918Z,1510149511.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:32.281Z,1510149512.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:32.298Z,1510149512.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:32.949Z,1510149512.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:32.972Z,1510149512.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:33.085Z,1510149513.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:33.136Z,1510149513.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:33.512Z,1510149513.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:33.528Z,1510149513.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:33.912Z,1510149513.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:33.928Z,1510149513.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:34.313Z,1510149514.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:34.329Z,1510149514.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:34.692Z,1510149514.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:34.724Z,1510149514.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:35.091Z,1510149515.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:35.107Z,1510149515.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:35.488Z,1510149515.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:35.505Z,1510149515.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:35.923Z,1510149515.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:35.939Z,1510149515.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:36.291Z,1510149516.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:36.307Z,1510149516.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:36.705Z,1510149516.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:36.744Z,1510149516.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:37.383Z,1510149517.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:37.404Z,1510149517.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:37.534Z,1510149517.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:37.575Z,1510149517.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:37.941Z,1510149517.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:37.983Z,1510149517.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:38.346Z,1510149518.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:38.378Z,1510149518.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:38.741Z,1510149518.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:38.764Z,1510149518.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:39.134Z,1510149519.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:39.150Z,1510149519.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:39.533Z,1510149519.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:39.549Z,1510149519.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:39.950Z,1510149519.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:39.978Z,1510149519.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:40.341Z,1510149520.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:40.405Z,1510149520.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:41.025Z,1510149521.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:41.041Z,1510149521.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:41.155Z,1510149521.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:41.181Z,1510149521.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:41.573Z,1510149521.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:41.609Z,1510149521.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:41.965Z,1510149521.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:41.996Z,1510149521.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:42.361Z,1510149522.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:42.389Z,1510149522.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:42.751Z,1510149522.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:42.804Z,1510149522.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:43.151Z,1510149523.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:43.192Z,1510149523.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:43.552Z,1510149523.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:43.607Z,1510149523.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:43.984Z,1510149523.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:44.007Z,1510149524.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:44.351Z,1510149524.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:44.372Z,1510149524.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:44.769Z,1510149524.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:44.797Z,1510149524.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:45.442Z,1510149525.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:45.459Z,1510149525.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:45.571Z,1510149525.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:45.619Z,1510149525.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:45.987Z,1510149525.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:46.004Z,1510149526.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:46.388Z,1510149526.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:46.404Z,1510149526.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:46.788Z,1510149526.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:46.804Z,1510149526.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:47.171Z,1510149527.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:47.205Z,1510149527.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:47.569Z,1510149527.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:47.599Z,1510149527.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:47.999Z,1510149527.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:48.019Z,1510149528.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:48.392Z,1510149528.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:48.415Z,1510149528.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:49.053Z,1510149529.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:49.069Z,1510149529.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:49.204Z,1510149529.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:49.247Z,1510149529.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:49.613Z,1510149529.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:49.644Z,1510149529.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:50.013Z,1510149530.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:50.045Z,1510149530.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:50.410Z,1510149530.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:50.442Z,1510149530.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:50.799Z,1510149530.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:50.819Z,1510149530.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:51.199Z,1510149531.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:51.215Z,1510149531.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:51.600Z,1510149531.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:51.652Z,1510149531.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:52.021Z,1510149532.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:52.045Z,1510149532.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:52.397Z,1510149532.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:52.419Z,1510149532.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:52.810Z,1510149532.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:52.846Z,1510149532.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:53.492Z,1510149533.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:53.511Z,1510149533.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:53.614Z,1510149533.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:53.664Z,1510149533.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:54.038Z,1510149534.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:54.059Z,1510149534.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:54.440Z,1510149534.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:54.456Z,1510149534.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:54.837Z,1510149534.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:54.853Z,1510149534.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:55.220Z,1510149535.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:55.254Z,1510149535.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:55.619Z,1510149535.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:55.651Z,1510149535.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:56.020Z,1510149536.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:56.063Z,1510149536.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:56.450Z,1510149536.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:56.467Z,1510149536.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:56.836Z,1510149536.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:56.859Z,1510149536.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:57.499Z,1510149537.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:57.515Z,1510149537.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:57.619Z,1510149537.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:57.656Z,1510149537.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:58.036Z,1510149538.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:58.053Z,1510149538.053 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:58.053Z,1510149538.053 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2017-11-08T13:58:58.053Z,1510149538.053 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T13:58:58.055Z,1510149538.055 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:58.055Z,1510149538.055 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2017-11-08T13:58:58.055Z,1510149538.055 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T13:58:58.057Z,1510149538.057 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:58.057Z,1510149538.057 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2017-11-08T13:58:58.057Z,1510149538.057 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T13:58:58.129Z,1510149538.129 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T13:58:58.129Z,1510149538.129 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T13:58:58.130Z,1510149538.130 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T13:58:58.433Z,1510149538.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:58.545Z,1510149538.545 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T13:58:58.545Z,1510149538.545 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2017-11-08T13:58:58.545Z,1510149538.545 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T13:58:58.546Z,1510149538.546 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2017-11-08T13:58:58.546Z,1510149538.546 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T13:58:58.546Z,1510149538.546 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2017-11-08T13:58:58.830Z,1510149538.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:58.862Z,1510149538.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T13:58:58.863Z,1510149538.863 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:58:58.863Z,1510149538.863 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:58:58.863Z,1510149538.863 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T13:58:58.864Z,1510149538.864 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:58:58.864Z,1510149538.864 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:58:58.865Z,1510149538.865 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T13:58:58.866Z,1510149538.866 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T13:58:58.866Z,1510149538.866 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T13:58:59.220Z,1510149539.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:59.250Z,1510149539.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T13:58:59.251Z,1510149539.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:58:59.627Z,1510149539.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:58:59.643Z,1510149539.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T13:58:59.644Z,1510149539.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:00.026Z,1510149540.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:00.042Z,1510149540.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T13:59:00.043Z,1510149540.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:00.440Z,1510149540.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:00.473Z,1510149540.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T13:59:00.474Z,1510149540.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:00.826Z,1510149540.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:00.842Z,1510149540.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T13:59:00.843Z,1510149540.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:01.234Z,1510149541.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:01.255Z,1510149541.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T13:59:01.256Z,1510149541.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:01.906Z,1510149541.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:01.931Z,1510149541.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-11-08T13:59:01.932Z,1510149541.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:02.044Z,1510149542.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:02.092Z,1510149542.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T13:59:02.094Z,1510149542.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:02.458Z,1510149542.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:02.508Z,1510149542.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-08T13:59:02.525Z,1510149542.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:02.857Z,1510149542.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:02.884Z,1510149542.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T13:59:02.885Z,1510149542.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:03.257Z,1510149543.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:03.288Z,1510149543.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T13:59:03.290Z,1510149543.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:03.644Z,1510149543.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:03.702Z,1510149543.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-08T13:59:03.703Z,1510149543.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:04.049Z,1510149544.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:04.064Z,1510149544.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T13:59:04.065Z,1510149544.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:04.481Z,1510149544.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:04.497Z,1510149544.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T13:59:04.499Z,1510149544.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:04.862Z,1510149544.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:04.934Z,1510149544.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T13:59:04.935Z,1510149544.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:05.535Z,1510149545.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:05.550Z,1510149545.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2017-11-08T13:59:05.551Z,1510149545.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:05.657Z,1510149545.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:05.728Z,1510149545.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T13:59:05.729Z,1510149545.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:06.085Z,1510149546.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:06.103Z,1510149546.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T13:59:06.104Z,1510149546.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:06.484Z,1510149546.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:06.503Z,1510149546.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T13:59:06.504Z,1510149546.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:06.883Z,1510149546.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:06.901Z,1510149546.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T13:59:06.902Z,1510149546.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:07.263Z,1510149547.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:07.306Z,1510149547.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T13:59:07.307Z,1510149547.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:07.663Z,1510149547.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:07.691Z,1510149547.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T13:59:07.693Z,1510149547.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:08.060Z,1510149548.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:08.100Z,1510149548.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T13:59:08.101Z,1510149548.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:08.490Z,1510149548.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:08.511Z,1510149548.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T13:59:08.512Z,1510149548.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:08.863Z,1510149548.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:08.896Z,1510149548.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T13:59:08.897Z,1510149548.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:09.284Z,1510149549.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:09.302Z,1510149549.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T13:59:09.304Z,1510149549.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:09.958Z,1510149549.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:09.985Z,1510149549.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2017-11-08T13:59:09.986Z,1510149549.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:10.101Z,1510149550.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:10.134Z,1510149550.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T13:59:10.135Z,1510149550.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:10.515Z,1510149550.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:10.543Z,1510149550.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T13:59:10.544Z,1510149550.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:10.907Z,1510149550.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:10.935Z,1510149550.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T13:59:10.936Z,1510149550.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:11.307Z,1510149551.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:11.323Z,1510149551.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T13:59:11.323Z,1510149551.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:11.702Z,1510149551.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:11.717Z,1510149551.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T13:59:11.718Z,1510149551.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:12.098Z,1510149552.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:12.145Z,1510149552.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T13:59:12.146Z,1510149552.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:12.522Z,1510149552.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:12.546Z,1510149552.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T13:59:12.547Z,1510149552.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:12.911Z,1510149552.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:12.948Z,1510149552.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T13:59:12.950Z,1510149552.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:13.614Z,1510149553.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:13.646Z,1510149553.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T13:59:13.647Z,1510149553.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:13.756Z,1510149553.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:13.813Z,1510149553.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-08T13:59:13.813Z,1510149553.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:14.179Z,1510149554.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:14.206Z,1510149554.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-08T13:59:14.207Z,1510149554.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:14.579Z,1510149554.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:14.611Z,1510149554.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-08T13:59:14.612Z,1510149554.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:14.974Z,1510149554.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:14.000Z,1510149555.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T13:59:15.001Z,1510149555.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:15.363Z,1510149555.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:15.380Z,1510149555.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T13:59:15.405Z,1510149555.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:15.763Z,1510149555.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:15.784Z,1510149555.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T13:59:15.801Z,1510149555.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:16.168Z,1510149556.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:16.185Z,1510149556.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T13:59:16.186Z,1510149556.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:16.586Z,1510149556.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:16.616Z,1510149556.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-08T13:59:16.617Z,1510149556.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:16.962Z,1510149556.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:16.979Z,1510149556.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T13:59:16.980Z,1510149556.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:17.378Z,1510149557.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:17.410Z,1510149557.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-08T13:59:17.411Z,1510149557.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:18.049Z,1510149558.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:18.065Z,1510149558.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:18.177Z,1510149558.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:18.220Z,1510149558.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:18.594Z,1510149558.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:18.632Z,1510149558.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:18.993Z,1510149558.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:19.024Z,1510149559.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:19.394Z,1510149559.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:19.420Z,1510149559.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:19.783Z,1510149559.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:19.800Z,1510149559.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:20.184Z,1510149560.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:20.200Z,1510149560.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:20.619Z,1510149560.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:20.640Z,1510149560.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:20.997Z,1510149560.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:21.027Z,1510149561.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:21.671Z,1510149561.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:21.687Z,1510149561.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:21.790Z,1510149561.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:21.814Z,1510149561.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:22.220Z,1510149562.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:22.237Z,1510149562.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:22.621Z,1510149562.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:22.637Z,1510149562.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:23.014Z,1510149563.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:23.036Z,1510149563.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:23.399Z,1510149563.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:23.432Z,1510149563.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:23.799Z,1510149563.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:23.831Z,1510149563.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:24.197Z,1510149564.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:24.253Z,1510149564.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:24.631Z,1510149564.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:24.651Z,1510149564.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:24.996Z,1510149564.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:25.032Z,1510149565.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:25.421Z,1510149565.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:25.437Z,1510149565.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:26.096Z,1510149566.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:26.149Z,1510149566.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:26.245Z,1510149566.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:26.287Z,1510149566.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:26.672Z,1510149566.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:26.696Z,1510149566.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:27.071Z,1510149567.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:27.121Z,1510149567.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:27.472Z,1510149567.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:27.488Z,1510149567.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:27.851Z,1510149567.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:27.900Z,1510149567.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:28.251Z,1510149568.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:28.288Z,1510149568.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:28.649Z,1510149568.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:28.685Z,1510149568.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:29.057Z,1510149569.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:29.091Z,1510149569.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:29.483Z,1510149569.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:29.499Z,1510149569.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:29.861Z,1510149569.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:29.898Z,1510149569.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:30.606Z,1510149570.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:30.637Z,1510149570.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:30.748Z,1510149570.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:30.795Z,1510149570.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:31.170Z,1510149571.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:31.198Z,1510149571.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:31.570Z,1510149571.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:31.600Z,1510149571.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:31.966Z,1510149571.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:31.991Z,1510149571.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:32.355Z,1510149572.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:32.372Z,1510149572.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:32.751Z,1510149572.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:32.771Z,1510149572.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:33.156Z,1510149573.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:33.172Z,1510149573.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:33.593Z,1510149573.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:33.609Z,1510149573.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:33.973Z,1510149573.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:34.001Z,1510149574.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:34.647Z,1510149574.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:34.663Z,1510149574.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:34.775Z,1510149574.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:34.823Z,1510149574.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:35.191Z,1510149575.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:35.209Z,1510149575.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:35.589Z,1510149575.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:35.623Z,1510149575.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:35.989Z,1510149575.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:36.061Z,1510149576.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:36.375Z,1510149576.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:36.412Z,1510149576.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:36.775Z,1510149576.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:36.791Z,1510149576.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:37.180Z,1510149577.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:37.196Z,1510149577.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:37.608Z,1510149577.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:37.624Z,1510149577.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:37.993Z,1510149577.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:38.021Z,1510149578.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:38.660Z,1510149578.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:38.676Z,1510149578.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:38.789Z,1510149578.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:38.831Z,1510149578.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:39.213Z,1510149579.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:39.229Z,1510149579.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:39.612Z,1510149579.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:39.628Z,1510149579.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:40.011Z,1510149580.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:40.027Z,1510149580.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:40.391Z,1510149580.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:40.424Z,1510149580.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:40.791Z,1510149580.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:40.807Z,1510149580.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:41.196Z,1510149581.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:41.231Z,1510149581.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:41.627Z,1510149581.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:41.643Z,1510149581.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:41.991Z,1510149581.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:42.007Z,1510149582.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:42.410Z,1510149582.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:42.440Z,1510149582.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:43.098Z,1510149583.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:43.132Z,1510149583.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:43.251Z,1510149583.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:43.294Z,1510149583.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:43.670Z,1510149583.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:43.695Z,1510149583.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:44.061Z,1510149584.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:44.091Z,1510149584.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:44.473Z,1510149584.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:44.489Z,1510149584.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:44.853Z,1510149584.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:44.881Z,1510149584.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:45.280Z,1510149585.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:45.299Z,1510149585.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:45.665Z,1510149585.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:45.707Z,1510149585.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:46.386Z,1510149586.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:46.455Z,1510149586.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:46.553Z,1510149586.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:46.578Z,1510149586.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:46.978Z,1510149586.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:47.001Z,1510149587.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:47.380Z,1510149587.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:47.397Z,1510149587.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:47.781Z,1510149587.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:47.843Z,1510149587.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:48.160Z,1510149588.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:48.192Z,1510149588.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:48.560Z,1510149588.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:48.593Z,1510149588.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:48.960Z,1510149588.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:49.016Z,1510149589.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:49.393Z,1510149589.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:49.410Z,1510149589.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:49.755Z,1510149589.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:49.810Z,1510149589.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:50.174Z,1510149590.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:50.211Z,1510149590.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:50.849Z,1510149590.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:50.864Z,1510149590.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:50.975Z,1510149590.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:51.004Z,1510149591.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:51.387Z,1510149591.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:51.419Z,1510149591.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:51.786Z,1510149591.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:51.820Z,1510149591.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:52.178Z,1510149592.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:52.214Z,1510149592.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:52.572Z,1510149592.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:52.588Z,1510149592.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:52.972Z,1510149592.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:52.995Z,1510149592.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:53.397Z,1510149593.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:53.423Z,1510149593.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:53.786Z,1510149593.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:53.869Z,1510149593.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:54.893Z,1510149594.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:54.918Z,1510149594.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:55.030Z,1510149595.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:55.080Z,1510149595.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:55.446Z,1510149595.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:55.472Z,1510149595.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:55.856Z,1510149595.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:55.872Z,1510149595.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:56.257Z,1510149596.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:56.273Z,1510149596.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:56.640Z,1510149596.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:56.671Z,1510149596.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:57.036Z,1510149597.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:57.065Z,1510149597.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:57.465Z,1510149597.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:57.481Z,1510149597.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:57.835Z,1510149597.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:57.887Z,1510149597.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:58.249Z,1510149598.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:58.276Z,1510149598.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:58.918Z,1510149598.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:58.935Z,1510149598.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:59.039Z,1510149599.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:59.083Z,1510149599.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:59.450Z,1510149599.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:59.484Z,1510149599.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T13:59:59.849Z,1510149599.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T13:59:59.883Z,1510149599.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:00.259Z,1510149600.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:00.276Z,1510149600.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:00.639Z,1510149600.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:00.675Z,1510149600.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:01.040Z,1510149601.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:01.073Z,1510149601.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:01.471Z,1510149601.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:01.488Z,1510149601.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:01.853Z,1510149601.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:01.883Z,1510149601.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:02.519Z,1510149602.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:02.536Z,1510149602.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:02.635Z,1510149602.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:02.683Z,1510149602.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:03.050Z,1510149603.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:03.075Z,1510149603.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:03.453Z,1510149603.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:03.512Z,1510149603.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:03.846Z,1510149603.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:03.878Z,1510149603.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:04.239Z,1510149604.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:04.254Z,1510149604.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:04.639Z,1510149604.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:04.656Z,1510149604.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:05.040Z,1510149605.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:05.056Z,1510149605.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:05.457Z,1510149605.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:05.487Z,1510149605.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:05.835Z,1510149605.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:05.852Z,1510149605.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:06.253Z,1510149606.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:06.281Z,1510149606.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:06.930Z,1510149606.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:06.946Z,1510149606.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:07.053Z,1510149607.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:07.087Z,1510149607.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:07.475Z,1510149607.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:07.492Z,1510149607.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:07.875Z,1510149607.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:07.898Z,1510149607.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:08.275Z,1510149608.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:08.296Z,1510149608.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:08.670Z,1510149608.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:08.686Z,1510149608.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:09.056Z,1510149609.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:09.081Z,1510149609.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:09.483Z,1510149609.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:09.558Z,1510149609.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:09.884Z,1510149609.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:09.900Z,1510149609.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:10.542Z,1510149610.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:10.558Z,1510149610.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:10.695Z,1510149610.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:10.751Z,1510149610.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:11.106Z,1510149611.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:11.136Z,1510149611.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:11.501Z,1510149611.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:11.548Z,1510149611.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:11.901Z,1510149611.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:11.926Z,1510149611.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:12.294Z,1510149612.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:12.311Z,1510149612.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:12.691Z,1510149612.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:12.711Z,1510149612.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:13.096Z,1510149613.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:13.113Z,1510149613.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:13.514Z,1510149613.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:13.538Z,1510149613.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:13.894Z,1510149613.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:13.910Z,1510149613.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:14.305Z,1510149614.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:14.342Z,1510149614.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:15.087Z,1510149615.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:15.103Z,1510149615.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:15.205Z,1510149615.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:15.255Z,1510149615.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:15.630Z,1510149615.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:15.652Z,1510149615.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:16.028Z,1510149616.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:16.044Z,1510149616.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:16.432Z,1510149616.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:16.448Z,1510149616.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:16.811Z,1510149616.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:16.850Z,1510149616.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:17.213Z,1510149617.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:17.241Z,1510149617.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:17.640Z,1510149617.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:17.656Z,1510149617.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:18.032Z,1510149618.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:18.048Z,1510149618.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:18.693Z,1510149618.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:18.709Z,1510149618.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:18.809Z,1510149618.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:18.851Z,1510149618.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:19.235Z,1510149619.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:19.252Z,1510149619.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:19.635Z,1510149619.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:19.691Z,1510149619.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:20.031Z,1510149620.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:20.051Z,1510149620.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:20.411Z,1510149620.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:20.441Z,1510149620.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:20.816Z,1510149620.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:20.841Z,1510149620.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:21.243Z,1510149621.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:21.264Z,1510149621.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:21.619Z,1510149621.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:21.656Z,1510149621.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:22.015Z,1510149622.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:22.047Z,1510149622.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:22.436Z,1510149622.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:22.452Z,1510149622.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:23.114Z,1510149623.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:23.140Z,1510149623.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:23.250Z,1510149623.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:23.302Z,1510149623.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:23.669Z,1510149623.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:23.703Z,1510149623.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:24.064Z,1510149624.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:24.094Z,1510149624.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:24.465Z,1510149624.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:24.491Z,1510149624.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:24.855Z,1510149624.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:24.871Z,1510149624.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:25.251Z,1510149625.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:25.271Z,1510149625.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:25.655Z,1510149625.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:25.671Z,1510149625.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:26.056Z,1510149626.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:26.072Z,1510149626.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:26.485Z,1510149626.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:26.505Z,1510149626.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:26.869Z,1510149626.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:26.903Z,1510149626.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:27.551Z,1510149627.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:27.571Z,1510149627.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:27.677Z,1510149627.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:27.714Z,1510149627.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:28.103Z,1510149628.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:28.123Z,1510149628.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:28.506Z,1510149628.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:28.522Z,1510149628.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:28.900Z,1510149628.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:28.947Z,1510149628.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:29.284Z,1510149629.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:29.316Z,1510149629.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:29.684Z,1510149629.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:29.721Z,1510149629.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:30.090Z,1510149630.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:30.114Z,1510149630.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:30.507Z,1510149630.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:30.550Z,1510149630.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:30.884Z,1510149630.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:30.921Z,1510149630.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:31.309Z,1510149631.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:31.315Z,1510149631.315 [PNI_TCM](ERROR): CRC does not match. Expected:0x31427 got:0x16244
2017-11-08T14:00:31.351Z,1510149631.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:32.003Z,1510149632.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:32.067Z,1510149632.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:32.169Z,1510149632.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:32.194Z,1510149632.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:32.596Z,1510149632.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:32.613Z,1510149632.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:32.996Z,1510149632.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:33.012Z,1510149633.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:33.386Z,1510149633.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:33.420Z,1510149633.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:33.776Z,1510149633.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:33.808Z,1510149633.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:34.177Z,1510149634.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:34.209Z,1510149634.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:34.605Z,1510149634.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:34.622Z,1510149634.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:34.988Z,1510149634.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:35.004Z,1510149635.004 [BPC1](ERROR): Failed to receive battery data
2017-11-08T14:00:35.005Z,1510149635.005 [BPC1] Communications Fault, FailCount= 1
2017-11-08T14:00:35.005Z,1510149635.005 [BPC1](ERROR): Communications Fault
2017-11-08T14:00:35.033Z,1510149635.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:35.121Z,1510149635.121 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T14:00:35.655Z,1510149635.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:35.671Z,1510149635.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:35.781Z,1510149635.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:35.798Z,1510149635.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:36.202Z,1510149636.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:36.235Z,1510149636.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:36.317Z,1510149636.317 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T14:00:36.317Z,1510149636.317 [BPC1] No Fault, FailCount= 1
2017-11-08T14:00:36.601Z,1510149636.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:36.669Z,1510149636.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:37.001Z,1510149637.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:37.036Z,1510149637.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:37.395Z,1510149637.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:37.428Z,1510149637.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:37.788Z,1510149637.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:37.803Z,1510149637.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:38.192Z,1510149638.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:38.208Z,1510149638.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:38.620Z,1510149638.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:38.637Z,1510149638.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:38.988Z,1510149638.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:39.003Z,1510149639.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:39.401Z,1510149639.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:39.438Z,1510149639.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:40.083Z,1510149640.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:40.104Z,1510149640.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:40.246Z,1510149640.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:40.262Z,1510149640.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:40.653Z,1510149640.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:40.685Z,1510149640.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:41.058Z,1510149641.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:41.082Z,1510149641.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:41.453Z,1510149641.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:41.484Z,1510149641.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:41.844Z,1510149641.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:41.860Z,1510149641.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:42.270Z,1510149642.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:42.287Z,1510149642.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:42.653Z,1510149642.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:42.685Z,1510149642.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:43.373Z,1510149643.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:43.395Z,1510149643.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:43.505Z,1510149643.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:43.543Z,1510149643.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:43.928Z,1510149643.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:43.944Z,1510149643.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:44.332Z,1510149644.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:44.348Z,1510149644.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:44.728Z,1510149644.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:44.785Z,1510149644.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:45.111Z,1510149645.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:45.142Z,1510149645.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:45.511Z,1510149645.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:45.542Z,1510149645.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:45.913Z,1510149645.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:45.941Z,1510149645.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:46.343Z,1510149646.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:46.363Z,1510149646.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:46.711Z,1510149646.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:46.747Z,1510149646.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:47.122Z,1510149647.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:47.154Z,1510149647.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:47.801Z,1510149647.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:47.817Z,1510149647.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:47.952Z,1510149647.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:47.995Z,1510149647.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:48.362Z,1510149648.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:48.394Z,1510149648.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:48.765Z,1510149648.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:48.802Z,1510149648.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:49.157Z,1510149649.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:49.174Z,1510149649.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:49.554Z,1510149649.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:49.571Z,1510149649.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:49.954Z,1510149649.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:49.970Z,1510149649.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:50.373Z,1510149650.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:50.399Z,1510149650.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:50.765Z,1510149650.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:50.800Z,1510149650.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:51.447Z,1510149651.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:51.467Z,1510149651.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:51.579Z,1510149651.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:51.628Z,1510149651.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:52.003Z,1510149652.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:52.024Z,1510149652.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:52.399Z,1510149652.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:52.419Z,1510149652.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:52.800Z,1510149652.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:52.816Z,1510149652.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:53.179Z,1510149653.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:53.214Z,1510149653.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:53.579Z,1510149653.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:53.611Z,1510149653.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:53.976Z,1510149653.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:54.011Z,1510149654.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:54.406Z,1510149654.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:54.422Z,1510149654.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:54.779Z,1510149654.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:54.803Z,1510149654.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:55.196Z,1510149655.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:55.219Z,1510149655.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:55.874Z,1510149655.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:55.920Z,1510149655.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:56.031Z,1510149656.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:56.079Z,1510149656.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:56.452Z,1510149656.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:56.469Z,1510149656.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:56.847Z,1510149656.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:56.864Z,1510149656.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:57.244Z,1510149657.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:57.301Z,1510149657.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:57.632Z,1510149657.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:57.660Z,1510149657.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:58.029Z,1510149658.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:58.075Z,1510149658.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:58.455Z,1510149658.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:58.471Z,1510149658.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:58.851Z,1510149658.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:58.871Z,1510149658.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:59.522Z,1510149659.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:59.537Z,1510149659.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:00:59.669Z,1510149659.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:00:59.718Z,1510149659.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:00.100Z,1510149660.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:00.116Z,1510149660.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:00.488Z,1510149660.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:00.511Z,1510149660.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:00.886Z,1510149660.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:00.932Z,1510149660.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:01.279Z,1510149661.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:01.310Z,1510149661.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:01.675Z,1510149661.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:01.700Z,1510149661.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:02.079Z,1510149662.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:02.098Z,1510149662.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:02.501Z,1510149662.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:02.530Z,1510149662.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:02.881Z,1510149662.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:02.915Z,1510149662.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:03.287Z,1510149663.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:03.306Z,1510149663.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:04.879Z,1510149664.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:04.900Z,1510149664.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:04.997Z,1510149664.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:05.036Z,1510149665.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:05.414Z,1510149665.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:05.447Z,1510149665.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:05.814Z,1510149665.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:05.841Z,1510149665.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:06.210Z,1510149666.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:06.260Z,1510149666.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:06.603Z,1510149666.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:06.644Z,1510149666.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:06.000Z,1510149667.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:07.016Z,1510149667.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:07.431Z,1510149667.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:07.448Z,1510149667.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:07.817Z,1510149667.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:07.848Z,1510149667.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:08.486Z,1510149668.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:08.503Z,1510149668.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:08.605Z,1510149668.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:08.647Z,1510149668.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:09.028Z,1510149669.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:09.045Z,1510149669.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:09.429Z,1510149669.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:09.444Z,1510149669.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:09.826Z,1510149669.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:09.847Z,1510149669.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:10.211Z,1510149670.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:10.239Z,1510149670.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:10.611Z,1510149670.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:10.648Z,1510149670.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:11.012Z,1510149671.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:11.045Z,1510149671.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:11.440Z,1510149671.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:11.456Z,1510149671.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:11.807Z,1510149671.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:11.849Z,1510149671.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:12.221Z,1510149672.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:12.254Z,1510149672.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:12.907Z,1510149672.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:12.944Z,1510149672.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:13.063Z,1510149673.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:13.107Z,1510149673.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:13.482Z,1510149673.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:13.504Z,1510149673.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:13.884Z,1510149673.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:13.908Z,1510149673.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:14.285Z,1510149674.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:14.301Z,1510149674.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:14.663Z,1510149674.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:14.688Z,1510149674.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:15.064Z,1510149675.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:15.080Z,1510149675.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:15.496Z,1510149675.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:15.512Z,1510149675.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:15.877Z,1510149675.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:15.912Z,1510149675.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:16.547Z,1510149676.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:16.563Z,1510149676.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:16.671Z,1510149676.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:16.711Z,1510149676.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:17.082Z,1510149677.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:17.132Z,1510149677.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:17.492Z,1510149677.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:17.508Z,1510149677.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:17.881Z,1510149677.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:17.919Z,1510149677.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:18.271Z,1510149678.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:18.331Z,1510149678.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:18.671Z,1510149678.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:18.687Z,1510149678.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:19.068Z,1510149679.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:19.085Z,1510149679.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:19.499Z,1510149679.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:19.557Z,1510149679.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:19.871Z,1510149679.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:19.911Z,1510149679.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:20.281Z,1510149680.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:20.339Z,1510149680.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:20.966Z,1510149680.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:20.987Z,1510149680.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:21.117Z,1510149681.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:21.163Z,1510149681.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:21.537Z,1510149681.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:21.563Z,1510149681.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:21.934Z,1510149681.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:21.959Z,1510149681.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:22.333Z,1510149682.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:22.370Z,1510149682.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:22.723Z,1510149682.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:22.739Z,1510149682.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:23.124Z,1510149683.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:23.161Z,1510149683.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:23.551Z,1510149683.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:23.567Z,1510149683.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:23.937Z,1510149683.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:23.967Z,1510149683.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:24.653Z,1510149684.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:24.669Z,1510149684.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:24.777Z,1510149684.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:24.823Z,1510149684.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:25.204Z,1510149685.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:25.220Z,1510149685.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:25.600Z,1510149685.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:25.616Z,1510149685.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:25.000Z,1510149686.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:26.016Z,1510149686.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:26.383Z,1510149686.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:26.414Z,1510149686.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:26.779Z,1510149686.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:26.813Z,1510149686.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:27.184Z,1510149687.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:27.214Z,1510149687.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:27.615Z,1510149687.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:27.631Z,1510149687.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:27.979Z,1510149687.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:28.013Z,1510149688.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:28.403Z,1510149688.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:28.463Z,1510149688.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:29.073Z,1510149689.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:29.113Z,1510149689.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:29.231Z,1510149689.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:29.267Z,1510149689.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:29.648Z,1510149689.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:29.664Z,1510149689.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:30.052Z,1510149690.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:30.075Z,1510149690.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:30.446Z,1510149690.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:30.468Z,1510149690.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:30.827Z,1510149690.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:30.868Z,1510149690.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:31.264Z,1510149691.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:31.280Z,1510149691.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:31.642Z,1510149691.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:31.674Z,1510149691.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:32.331Z,1510149692.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:32.362Z,1510149692.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:32.472Z,1510149692.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:32.521Z,1510149692.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:32.890Z,1510149692.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:32.925Z,1510149692.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:33.293Z,1510149693.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:33.322Z,1510149693.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:33.689Z,1510149693.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:33.726Z,1510149693.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:34.080Z,1510149694.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:34.115Z,1510149694.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:34.479Z,1510149694.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:34.522Z,1510149694.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:34.875Z,1510149694.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:34.892Z,1510149694.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:35.281Z,1510149695.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:35.308Z,1510149695.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:35.705Z,1510149695.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:35.730Z,1510149695.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:36.093Z,1510149696.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:36.135Z,1510149696.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:36.773Z,1510149696.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:36.789Z,1510149696.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:36.901Z,1510149696.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:36.933Z,1510149696.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:37.313Z,1510149697.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:37.347Z,1510149697.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:37.715Z,1510149697.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:37.742Z,1510149697.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:38.112Z,1510149698.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:38.142Z,1510149698.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:38.505Z,1510149698.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:38.541Z,1510149698.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:38.905Z,1510149698.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:38.947Z,1510149698.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:39.330Z,1510149699.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:39.396Z,1510149699.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:39.704Z,1510149699.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:39.721Z,1510149699.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:40.104Z,1510149700.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:40.163Z,1510149700.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:40.517Z,1510149700.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:40.549Z,1510149700.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:41.187Z,1510149701.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:41.229Z,1510149701.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:41.367Z,1510149701.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:41.411Z,1510149701.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:41.778Z,1510149701.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:41.846Z,1510149701.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:42.177Z,1510149702.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:42.203Z,1510149702.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:42.578Z,1510149702.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:42.615Z,1510149702.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:42.967Z,1510149702.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:43.006Z,1510149703.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:43.367Z,1510149703.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:43.404Z,1510149703.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:43.763Z,1510149703.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:43.802Z,1510149703.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:44.168Z,1510149704.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:44.207Z,1510149704.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:44.600Z,1510149704.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:44.616Z,1510149704.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:44.978Z,1510149704.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:45.010Z,1510149705.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:45.658Z,1510149705.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:45.675Z,1510149705.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:45.805Z,1510149705.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:45.821Z,1510149705.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:46.214Z,1510149706.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:46.230Z,1510149706.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:46.613Z,1510149706.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:46.629Z,1510149706.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:47.009Z,1510149707.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:47.026Z,1510149707.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:47.405Z,1510149707.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:47.421Z,1510149707.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:47.804Z,1510149707.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:47.819Z,1510149707.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:48.203Z,1510149708.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:48.219Z,1510149708.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:48.621Z,1510149708.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:48.650Z,1510149708.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:49.005Z,1510149709.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:49.021Z,1510149709.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:49.413Z,1510149709.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:49.429Z,1510149709.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:50.098Z,1510149710.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:50.159Z,1510149710.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:50.273Z,1510149710.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:50.320Z,1510149710.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:50.700Z,1510149710.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:50.716Z,1510149710.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:51.094Z,1510149711.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:51.116Z,1510149711.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:51.496Z,1510149711.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:51.512Z,1510149711.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:51.879Z,1510149711.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:51.909Z,1510149711.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:52.275Z,1510149712.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:52.300Z,1510149712.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:52.675Z,1510149712.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:52.691Z,1510149712.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:53.075Z,1510149713.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:53.090Z,1510149713.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:53.507Z,1510149713.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:53.524Z,1510149713.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:53.893Z,1510149713.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:53.922Z,1510149713.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:54.564Z,1510149714.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:54.580Z,1510149714.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:54.681Z,1510149714.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:54.731Z,1510149714.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:55.098Z,1510149715.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:55.127Z,1510149715.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:55.497Z,1510149715.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:55.522Z,1510149715.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:55.894Z,1510149715.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:55.919Z,1510149715.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:56.287Z,1510149716.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:56.321Z,1510149716.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:56.683Z,1510149716.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:56.699Z,1510149716.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:57.088Z,1510149717.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:57.125Z,1510149717.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:57.516Z,1510149717.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:57.532Z,1510149717.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:57.887Z,1510149717.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:57.903Z,1510149717.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:58.297Z,1510149718.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:58.325Z,1510149718.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:58.982Z,1510149718.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:58.000Z,1510149719.000 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:58.000Z,1510149719.000 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2017-11-08T14:01:58.000Z,1510149719.000 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T14:01:59.002Z,1510149719.002 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:59.002Z,1510149719.002 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2017-11-08T14:01:59.002Z,1510149719.002 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T14:01:59.004Z,1510149719.004 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:01:59.004Z,1510149719.004 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2017-11-08T14:01:59.004Z,1510149719.004 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T14:01:59.109Z,1510149719.109 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T14:01:59.109Z,1510149719.109 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T14:01:59.109Z,1510149719.109 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T14:01:59.157Z,1510149719.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:59.277Z,1510149719.277 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T14:01:59.277Z,1510149719.277 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2017-11-08T14:01:59.277Z,1510149719.277 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T14:01:59.277Z,1510149719.277 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2017-11-08T14:01:59.278Z,1510149719.278 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T14:01:59.278Z,1510149719.278 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2017-11-08T14:01:59.554Z,1510149719.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:59.577Z,1510149719.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T14:01:59.577Z,1510149719.577 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:01:59.578Z,1510149719.578 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:01:59.578Z,1510149719.578 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T14:01:59.578Z,1510149719.578 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:01:59.579Z,1510149719.579 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:01:59.579Z,1510149719.579 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T14:01:59.579Z,1510149719.579 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:01:59.580Z,1510149719.580 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:01:59.957Z,1510149719.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:01:59.988Z,1510149719.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2017-11-08T14:01:59.989Z,1510149719.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:00.350Z,1510149720.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:00.366Z,1510149720.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2017-11-08T14:02:00.366Z,1510149720.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:00.745Z,1510149720.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:00.818Z,1510149720.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2017-11-08T14:02:00.819Z,1510149720.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:01.145Z,1510149721.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:01.161Z,1510149721.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2017-11-08T14:02:01.162Z,1510149721.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:01.561Z,1510149721.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:01.577Z,1510149721.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2017-11-08T14:02:01.578Z,1510149721.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:01.955Z,1510149721.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:01.975Z,1510149721.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2017-11-08T14:02:01.976Z,1510149721.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:02.621Z,1510149722.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:02.673Z,1510149722.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2017-11-08T14:02:02.673Z,1510149722.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:02.807Z,1510149722.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:02.851Z,1510149722.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-11-08T14:02:02.853Z,1510149722.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:03.222Z,1510149723.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:03.270Z,1510149723.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2017-11-08T14:02:03.271Z,1510149723.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:03.625Z,1510149723.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:03.655Z,1510149723.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2017-11-08T14:02:03.656Z,1510149723.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:04.017Z,1510149724.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:04.071Z,1510149724.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2017-11-08T14:02:04.072Z,1510149724.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:04.411Z,1510149724.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:04.431Z,1510149724.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2017-11-08T14:02:04.432Z,1510149724.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:04.810Z,1510149724.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:04.825Z,1510149724.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2017-11-08T14:02:04.826Z,1510149724.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:05.214Z,1510149725.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:05.233Z,1510149725.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-11-08T14:02:05.234Z,1510149725.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:05.634Z,1510149725.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:05.657Z,1510149725.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2017-11-08T14:02:05.658Z,1510149725.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:06.010Z,1510149726.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:06.025Z,1510149726.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2017-11-08T14:02:06.026Z,1510149726.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:06.421Z,1510149726.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:06.437Z,1510149726.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2017-11-08T14:02:06.438Z,1510149726.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:07.104Z,1510149727.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:07.120Z,1510149727.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T14:02:07.121Z,1510149727.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:07.231Z,1510149727.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:07.263Z,1510149727.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2017-11-08T14:02:07.264Z,1510149727.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:07.639Z,1510149727.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:07.671Z,1510149727.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2017-11-08T14:02:07.672Z,1510149727.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:08.038Z,1510149728.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:08.069Z,1510149728.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2017-11-08T14:02:08.070Z,1510149728.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:08.438Z,1510149728.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:08.462Z,1510149728.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2017-11-08T14:02:08.463Z,1510149728.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:08.824Z,1510149728.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:08.867Z,1510149728.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2017-11-08T14:02:08.868Z,1510149728.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:09.254Z,1510149729.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:09.274Z,1510149729.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2017-11-08T14:02:09.275Z,1510149729.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:09.641Z,1510149729.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:09.666Z,1510149729.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2017-11-08T14:02:09.667Z,1510149729.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:10.318Z,1510149730.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:10.334Z,1510149730.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T14:02:10.335Z,1510149730.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:10.472Z,1510149730.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:10.512Z,1510149730.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2017-11-08T14:02:10.513Z,1510149730.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:10.887Z,1510149730.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:10.918Z,1510149730.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2017-11-08T14:02:10.918Z,1510149730.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:11.285Z,1510149731.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:11.316Z,1510149731.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2017-11-08T14:02:11.318Z,1510149731.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:11.682Z,1510149731.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:11.713Z,1510149731.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2017-11-08T14:02:11.714Z,1510149731.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:12.074Z,1510149732.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:12.127Z,1510149732.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2017-11-08T14:02:12.128Z,1510149732.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:12.474Z,1510149732.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:12.493Z,1510149732.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2017-11-08T14:02:12.494Z,1510149732.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:12.875Z,1510149732.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:12.891Z,1510149732.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2017-11-08T14:02:12.892Z,1510149732.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:13.296Z,1510149733.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:13.323Z,1510149733.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2017-11-08T14:02:13.324Z,1510149733.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:13.711Z,1510149733.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:13.727Z,1510149733.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2017-11-08T14:02:13.728Z,1510149733.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:14.089Z,1510149734.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:14.267Z,1510149734.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T14:02:14.277Z,1510149734.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:14.960Z,1510149734.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:14.976Z,1510149734.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T14:02:14.977Z,1510149734.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:15.089Z,1510149735.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:15.134Z,1510149735.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T14:02:15.135Z,1510149735.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:15.515Z,1510149735.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:15.531Z,1510149735.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T14:02:15.532Z,1510149735.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:15.915Z,1510149735.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:15.930Z,1510149735.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T14:02:15.931Z,1510149735.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:16.312Z,1510149736.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:16.328Z,1510149736.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T14:02:16.329Z,1510149736.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:16.695Z,1510149736.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:16.727Z,1510149736.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T14:02:16.728Z,1510149736.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:17.096Z,1510149737.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:17.127Z,1510149737.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T14:02:17.128Z,1510149737.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:17.523Z,1510149737.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:17.539Z,1510149737.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T14:02:17.540Z,1510149737.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:17.915Z,1510149737.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:17.931Z,1510149737.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T14:02:17.932Z,1510149737.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:18.582Z,1510149738.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:18.598Z,1510149738.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T14:02:18.599Z,1510149738.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:18.735Z,1510149738.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:18.775Z,1510149738.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-08T14:02:18.776Z,1510149738.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:19.156Z,1510149739.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:19.172Z,1510149739.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:19.556Z,1510149739.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:19.572Z,1510149739.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:19.956Z,1510149739.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:19.973Z,1510149739.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:20.336Z,1510149740.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:20.364Z,1510149740.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:20.735Z,1510149740.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:20.775Z,1510149740.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:21.136Z,1510149741.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:21.169Z,1510149741.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:21.567Z,1510149741.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:21.583Z,1510149741.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:21.935Z,1510149741.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:21.951Z,1510149741.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:22.350Z,1510149742.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:22.369Z,1510149742.369 [BPC1](ERROR): Failed to parse message.
2017-11-08T14:02:22.369Z,1510149742.369 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-08T14:02:22.369Z,1510149742.369 [BPC1] Data Fault, FailCount= 1
2017-11-08T14:02:22.369Z,1510149742.369 [BPC1](ERROR): Data Fault
2017-11-08T14:02:22.379Z,1510149742.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:22.453Z,1510149742.453 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T14:02:23.061Z,1510149743.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:23.078Z,1510149743.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:23.187Z,1510149743.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:23.228Z,1510149743.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:23.597Z,1510149743.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:23.632Z,1510149743.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:23.721Z,1510149743.721 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T14:02:23.721Z,1510149743.721 [BPC1] No Fault, FailCount= 1
2017-11-08T14:02:23.997Z,1510149743.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:24.079Z,1510149744.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:24.397Z,1510149744.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:24.430Z,1510149744.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:24.786Z,1510149744.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:24.802Z,1510149744.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:25.187Z,1510149745.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:25.208Z,1510149745.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:25.609Z,1510149745.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:25.633Z,1510149745.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:25.997Z,1510149745.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:26.032Z,1510149746.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:26.679Z,1510149746.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:26.700Z,1510149746.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:26.801Z,1510149746.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:26.843Z,1510149746.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:27.228Z,1510149747.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:27.244Z,1510149747.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:27.628Z,1510149747.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:27.644Z,1510149747.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:28.020Z,1510149748.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:28.036Z,1510149748.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:28.408Z,1510149748.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:28.433Z,1510149748.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:28.807Z,1510149748.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:28.841Z,1510149748.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:29.208Z,1510149749.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:29.233Z,1510149749.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:29.635Z,1510149749.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:29.651Z,1510149749.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:30.007Z,1510149750.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:30.032Z,1510149750.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:30.428Z,1510149750.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:30.444Z,1510149750.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:31.098Z,1510149751.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:31.132Z,1510149751.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:31.251Z,1510149751.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:31.295Z,1510149751.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:31.672Z,1510149751.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:31.692Z,1510149751.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:32.076Z,1510149752.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:32.131Z,1510149752.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:32.472Z,1510149752.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:32.488Z,1510149752.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:32.851Z,1510149752.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:32.884Z,1510149752.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:33.247Z,1510149753.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:33.267Z,1510149753.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:33.652Z,1510149753.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:33.668Z,1510149753.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:34.052Z,1510149754.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:34.084Z,1510149754.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:34.486Z,1510149754.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:34.506Z,1510149754.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:34.865Z,1510149754.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:34.902Z,1510149754.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:35.550Z,1510149755.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:35.571Z,1510149755.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:35.708Z,1510149755.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:35.724Z,1510149755.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:36.130Z,1510149756.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:36.160Z,1510149756.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:36.529Z,1510149756.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:36.554Z,1510149756.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:36.923Z,1510149756.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:36.959Z,1510149756.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:37.313Z,1510149757.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:37.351Z,1510149757.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:37.713Z,1510149757.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:37.751Z,1510149757.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:38.116Z,1510149758.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:38.132Z,1510149758.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:38.538Z,1510149758.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:38.561Z,1510149758.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:38.916Z,1510149758.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:38.932Z,1510149758.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:39.329Z,1510149759.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:39.354Z,1510149759.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:40.034Z,1510149760.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:40.066Z,1510149760.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:40.177Z,1510149760.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:40.193Z,1510149760.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:40.597Z,1510149760.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:40.633Z,1510149760.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:40.998Z,1510149760.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:41.027Z,1510149761.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:41.393Z,1510149761.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:41.421Z,1510149761.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:41.784Z,1510149761.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:41.800Z,1510149761.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:42.189Z,1510149762.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:42.221Z,1510149762.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:42.619Z,1510149762.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:42.687Z,1510149762.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:43.001Z,1510149763.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:43.030Z,1510149763.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:43.678Z,1510149763.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:43.701Z,1510149763.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:43.843Z,1510149763.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:43.879Z,1510149763.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:44.257Z,1510149764.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:44.305Z,1510149764.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:44.658Z,1510149764.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:44.691Z,1510149764.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:45.054Z,1510149765.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:45.081Z,1510149765.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:45.444Z,1510149765.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:45.492Z,1510149765.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:45.844Z,1510149765.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:45.860Z,1510149765.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:46.272Z,1510149766.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:46.328Z,1510149766.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:46.644Z,1510149766.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:46.660Z,1510149766.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:46.773Z,1510149766.773 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T14:02:47.043Z,1510149767.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:47.064Z,1510149767.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:47.456Z,1510149767.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:47.485Z,1510149767.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:48.130Z,1510149768.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:48.146Z,1510149768.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:48.256Z,1510149768.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:48.299Z,1510149768.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:48.670Z,1510149768.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:48.737Z,1510149768.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:49.065Z,1510149769.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:49.092Z,1510149769.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:49.470Z,1510149769.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:49.500Z,1510149769.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:49.855Z,1510149769.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:49.871Z,1510149769.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:50.259Z,1510149770.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:50.275Z,1510149770.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:50.655Z,1510149770.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:50.671Z,1510149770.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:51.056Z,1510149771.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:51.072Z,1510149771.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:51.488Z,1510149771.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:51.504Z,1510149771.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:51.868Z,1510149771.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:51.898Z,1510149771.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:52.550Z,1510149772.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:52.566Z,1510149772.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:52.701Z,1510149772.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:52.742Z,1510149772.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:53.114Z,1510149773.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:53.145Z,1510149773.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:53.513Z,1510149773.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:53.544Z,1510149773.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:53.909Z,1510149773.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:53.934Z,1510149773.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:54.302Z,1510149774.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:54.359Z,1510149774.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:54.702Z,1510149774.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:54.717Z,1510149774.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:55.103Z,1510149775.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:55.123Z,1510149775.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:55.525Z,1510149775.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:55.555Z,1510149775.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:55.898Z,1510149775.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:55.914Z,1510149775.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:56.313Z,1510149776.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:56.345Z,1510149776.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:57.037Z,1510149777.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:57.060Z,1510149777.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:57.170Z,1510149777.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:57.198Z,1510149777.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:57.592Z,1510149777.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:57.609Z,1510149777.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:57.991Z,1510149777.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:58.008Z,1510149778.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:58.377Z,1510149778.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:58.404Z,1510149778.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:58.771Z,1510149778.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:58.802Z,1510149778.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:59.172Z,1510149779.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:59.202Z,1510149779.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:59.594Z,1510149779.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:02:59.656Z,1510149779.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:02:59.993Z,1510149779.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:00.009Z,1510149780.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:00.661Z,1510149780.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:00.678Z,1510149780.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:00.810Z,1510149780.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:00.850Z,1510149780.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:01.221Z,1510149781.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:01.258Z,1510149781.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:01.621Z,1510149781.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:01.658Z,1510149781.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:02.013Z,1510149782.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:02.035Z,1510149782.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:02.414Z,1510149782.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:02.430Z,1510149782.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:02.814Z,1510149782.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:02.830Z,1510149782.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:03.229Z,1510149783.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:03.259Z,1510149783.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:03.614Z,1510149783.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:03.630Z,1510149783.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:04.013Z,1510149784.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:04.035Z,1510149784.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:04.418Z,1510149784.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:04.440Z,1510149784.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:05.101Z,1510149785.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:05.110Z,1510149785.110 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T14:03:05.110Z,1510149785.110 [BPC1] Data Fault, FailCount= 1
2017-11-08T14:03:05.110Z,1510149785.110 [BPC1](ERROR): Data Fault
2017-11-08T14:03:05.120Z,1510149785.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:05.201Z,1510149785.201 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T14:03:05.232Z,1510149785.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:05.275Z,1510149785.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:05.646Z,1510149785.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:05.678Z,1510149785.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:06.045Z,1510149786.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:06.061Z,1510149786.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:06.165Z,1510149786.165 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T14:03:06.165Z,1510149786.165 [BPC1] No Fault, FailCount= 1
2017-11-08T14:03:06.442Z,1510149786.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:06.522Z,1510149786.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:06.835Z,1510149786.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:06.852Z,1510149786.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:07.262Z,1510149787.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:07.284Z,1510149787.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:07.646Z,1510149787.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:07.687Z,1510149787.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:08.331Z,1510149788.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:08.352Z,1510149788.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:08.449Z,1510149788.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:08.502Z,1510149788.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:08.876Z,1510149788.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:08.892Z,1510149788.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:09.275Z,1510149789.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:09.291Z,1510149789.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:09.673Z,1510149789.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:09.691Z,1510149789.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:10.051Z,1510149790.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:10.090Z,1510149790.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:10.455Z,1510149790.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:10.487Z,1510149790.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:10.851Z,1510149790.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:10.876Z,1510149790.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:11.255Z,1510149791.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:11.288Z,1510149791.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:11.686Z,1510149791.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:11.702Z,1510149791.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:12.065Z,1510149792.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:12.093Z,1510149792.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:12.750Z,1510149792.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:12.771Z,1510149792.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:12.903Z,1510149792.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:12.919Z,1510149792.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:13.327Z,1510149793.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:13.353Z,1510149793.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:13.723Z,1510149793.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:13.748Z,1510149793.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:14.119Z,1510149794.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:14.149Z,1510149794.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:14.510Z,1510149794.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:14.551Z,1510149794.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:14.912Z,1510149794.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:14.928Z,1510149794.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:15.330Z,1510149795.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:15.360Z,1510149795.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:15.725Z,1510149795.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:15.759Z,1510149795.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:16.402Z,1510149796.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:16.423Z,1510149796.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:16.562Z,1510149796.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:16.579Z,1510149796.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:16.977Z,1510149796.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:17.006Z,1510149797.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:17.382Z,1510149797.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:17.412Z,1510149797.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:17.774Z,1510149797.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:17.806Z,1510149797.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:18.167Z,1510149798.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:18.184Z,1510149798.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:18.567Z,1510149798.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:18.585Z,1510149798.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:18.966Z,1510149798.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:18.987Z,1510149798.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:19.393Z,1510149799.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:19.417Z,1510149799.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:19.771Z,1510149799.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:19.787Z,1510149799.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:20.178Z,1510149800.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:20.194Z,1510149800.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:20.846Z,1510149800.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:20.867Z,1510149800.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:20.983Z,1510149800.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:21.016Z,1510149801.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:21.394Z,1510149801.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:21.420Z,1510149801.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:21.797Z,1510149801.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:21.823Z,1510149801.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:22.208Z,1510149802.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:22.225Z,1510149802.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:22.584Z,1510149802.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:22.600Z,1510149802.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:22.985Z,1510149802.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:23.001Z,1510149803.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:23.416Z,1510149803.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:23.433Z,1510149803.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:23.509Z,1510149803.509 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:03:23.509Z,1510149803.509 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T14:03:23.765Z,1510149803.765 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:03:23.765Z,1510149803.765 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:03:23.765Z,1510149803.765 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:03:23.765Z,1510149803.765 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T14:03:23.766Z,1510149803.766 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:03:23.798Z,1510149803.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:23.840Z,1510149803.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:23.925Z,1510149803.925 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:03:24.169Z,1510149804.169 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:03:24.314Z,1510149804.314 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:03:24.587Z,1510149804.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:24.606Z,1510149804.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:24.743Z,1510149804.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:24.787Z,1510149804.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:25.150Z,1510149805.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:25.183Z,1510149805.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:25.550Z,1510149805.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:25.589Z,1510149805.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:25.672Z,1510149805.672 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:03:25.672Z,1510149805.672 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T14:03:25.929Z,1510149805.929 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:03:25.929Z,1510149805.929 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:03:25.929Z,1510149805.929 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:03:25.929Z,1510149805.929 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T14:03:25.930Z,1510149805.930 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:03:25.954Z,1510149805.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:25.999Z,1510149805.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:26.087Z,1510149806.087 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:03:26.333Z,1510149806.333 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:03:26.370Z,1510149806.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:26.418Z,1510149806.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:26.521Z,1510149806.521 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:03:26.742Z,1510149806.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:26.838Z,1510149806.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:27.142Z,1510149807.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:27.160Z,1510149807.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:27.566Z,1510149807.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:27.612Z,1510149807.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:27.951Z,1510149807.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:27.968Z,1510149807.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:28.064Z,1510149808.064 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:03:28.065Z,1510149808.065 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T14:03:28.137Z,1510149808.137 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:03:28.137Z,1510149808.137 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:03:28.137Z,1510149808.137 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:03:28.137Z,1510149808.137 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T14:03:28.137Z,1510149808.137 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:03:28.541Z,1510149808.541 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:03:28.681Z,1510149808.681 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:03:28.718Z,1510149808.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:28.773Z,1510149808.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:28.865Z,1510149808.865 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:03:28.911Z,1510149808.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:28.928Z,1510149808.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:29.310Z,1510149809.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:29.332Z,1510149809.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:29.709Z,1510149809.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:29.729Z,1510149809.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:30.112Z,1510149810.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:30.132Z,1510149810.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:30.233Z,1510149810.233 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:03:30.233Z,1510149810.233 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T14:03:30.297Z,1510149810.297 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:03:30.297Z,1510149810.297 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:03:30.297Z,1510149810.297 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:03:30.297Z,1510149810.297 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T14:03:30.297Z,1510149810.297 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:03:30.496Z,1510149810.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:30.525Z,1510149810.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:30.605Z,1510149810.605 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:03:30.701Z,1510149810.701 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:03:30.788Z,1510149810.788 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:03:30.909Z,1510149810.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:30.927Z,1510149810.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:31.323Z,1510149811.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:31.361Z,1510149811.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:31.708Z,1510149811.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:31.732Z,1510149811.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:32.389Z,1510149812.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:32.405Z,1510149812.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:32.493Z,1510149812.493 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:03:32.493Z,1510149812.493 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T14:03:32.523Z,1510149812.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:32.560Z,1510149812.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:32.809Z,1510149812.809 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:03:32.809Z,1510149812.809 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:03:32.809Z,1510149812.809 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:03:32.809Z,1510149812.809 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T14:03:32.809Z,1510149812.809 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:03:32.938Z,1510149812.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:32.971Z,1510149812.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:33.049Z,1510149813.049 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:03:33.049Z,1510149813.049 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:03:33.213Z,1510149813.213 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:03:33.312Z,1510149813.312 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:03:33.354Z,1510149813.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:33.374Z,1510149813.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:33.737Z,1510149813.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:33.769Z,1510149813.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:34.120Z,1510149814.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:34.137Z,1510149814.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:34.524Z,1510149814.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:34.541Z,1510149814.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:34.931Z,1510149814.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:34.948Z,1510149814.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:35.322Z,1510149815.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:35.340Z,1510149815.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:35.755Z,1510149815.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:35.772Z,1510149815.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:36.141Z,1510149816.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:36.172Z,1510149816.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:36.861Z,1510149816.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:36.918Z,1510149816.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:37.033Z,1510149817.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:37.058Z,1510149817.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:37.462Z,1510149817.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:37.479Z,1510149817.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:37.850Z,1510149817.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:37.883Z,1510149817.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:38.250Z,1510149818.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:38.282Z,1510149818.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:38.642Z,1510149818.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:38.659Z,1510149818.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:39.040Z,1510149819.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:39.056Z,1510149819.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:39.474Z,1510149819.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:39.490Z,1510149819.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:39.843Z,1510149819.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:39.860Z,1510149819.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:40.243Z,1510149820.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:40.259Z,1510149820.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:40.654Z,1510149820.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:40.691Z,1510149820.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:41.334Z,1510149821.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:41.350Z,1510149821.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:41.449Z,1510149821.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:41.501Z,1510149821.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:41.877Z,1510149821.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:41.894Z,1510149821.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:42.274Z,1510149822.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:42.310Z,1510149822.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:42.666Z,1510149822.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:42.691Z,1510149822.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:43.059Z,1510149823.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:43.091Z,1510149823.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:43.459Z,1510149823.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:43.496Z,1510149823.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:43.856Z,1510149823.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:43.889Z,1510149823.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:44.289Z,1510149824.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:44.306Z,1510149824.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:44.668Z,1510149824.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:44.695Z,1510149824.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:45.354Z,1510149825.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:45.371Z,1510149825.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:45.507Z,1510149825.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:45.547Z,1510149825.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:45.918Z,1510149825.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:45.948Z,1510149825.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:46.310Z,1510149826.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:46.342Z,1510149826.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:46.714Z,1510149826.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:46.744Z,1510149826.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:47.098Z,1510149827.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:47.120Z,1510149827.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:47.499Z,1510149827.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:47.516Z,1510149827.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:47.905Z,1510149827.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:47.922Z,1510149827.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:48.326Z,1510149828.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:48.350Z,1510149828.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:48.702Z,1510149828.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:48.767Z,1510149828.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:49.114Z,1510149829.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:49.164Z,1510149829.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:49.796Z,1510149829.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:49.812Z,1510149829.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:49.925Z,1510149829.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:49.967Z,1510149829.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:50.356Z,1510149830.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:50.374Z,1510149830.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:50.743Z,1510149830.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:50.811Z,1510149830.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:51.148Z,1510149831.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:51.164Z,1510149831.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:51.532Z,1510149831.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:51.588Z,1510149831.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:51.932Z,1510149831.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:51.957Z,1510149831.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:52.358Z,1510149832.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:52.375Z,1510149832.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:52.753Z,1510149832.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:52.770Z,1510149832.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:53.421Z,1510149833.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:53.456Z,1510149833.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:53.569Z,1510149833.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:53.620Z,1510149833.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:53.994Z,1510149833.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:54.017Z,1510149834.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:54.386Z,1510149834.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:54.418Z,1510149834.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:54.782Z,1510149834.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:54.810Z,1510149834.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:55.176Z,1510149835.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:55.192Z,1510149835.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:55.575Z,1510149835.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:55.592Z,1510149835.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:55.976Z,1510149835.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:55.992Z,1510149835.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:56.413Z,1510149836.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:56.430Z,1510149836.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:56.780Z,1510149836.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:56.796Z,1510149836.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:57.185Z,1510149837.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:57.202Z,1510149837.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:57.872Z,1510149837.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:57.887Z,1510149837.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:57.989Z,1510149837.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:58.035Z,1510149838.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:58.406Z,1510149838.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:58.440Z,1510149838.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:58.804Z,1510149838.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:58.830Z,1510149838.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:59.206Z,1510149839.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:59.231Z,1510149839.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:59.595Z,1510149839.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:03:59.644Z,1510149839.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:03:59.996Z,1510149839.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:00.033Z,1510149840.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:00.424Z,1510149840.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:00.440Z,1510149840.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:00.817Z,1510149840.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:00.833Z,1510149840.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:01.578Z,1510149841.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:01.594Z,1510149841.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:01.702Z,1510149841.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:01.740Z,1510149841.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:02.123Z,1510149842.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:02.153Z,1510149842.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:02.525Z,1510149842.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:02.541Z,1510149842.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:02.926Z,1510149842.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:02.942Z,1510149842.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:03.308Z,1510149843.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:03.337Z,1510149843.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:03.708Z,1510149843.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:03.735Z,1510149843.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:04.107Z,1510149844.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:04.141Z,1510149844.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:04.539Z,1510149844.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:04.560Z,1510149844.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:04.909Z,1510149844.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:04.938Z,1510149844.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:05.329Z,1510149845.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:05.346Z,1510149845.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:06.002Z,1510149846.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:06.037Z,1510149846.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:06.145Z,1510149846.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:06.161Z,1510149846.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:06.562Z,1510149846.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:06.590Z,1510149846.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:06.966Z,1510149846.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:07.003Z,1510149847.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:07.362Z,1510149847.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:07.389Z,1510149847.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:07.751Z,1510149847.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:07.785Z,1510149847.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:08.152Z,1510149848.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:08.169Z,1510149848.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:08.586Z,1510149848.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:08.602Z,1510149848.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:08.966Z,1510149848.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:08.992Z,1510149848.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:09.647Z,1510149849.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:09.668Z,1510149849.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:09.766Z,1510149849.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:09.791Z,1510149849.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:10.183Z,1510149850.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:10.220Z,1510149850.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:10.582Z,1510149850.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:10.614Z,1510149850.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:10.986Z,1510149850.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:11.026Z,1510149851.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:11.373Z,1510149851.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:11.402Z,1510149851.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:11.772Z,1510149851.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:11.851Z,1510149851.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:12.172Z,1510149852.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:12.188Z,1510149852.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:12.598Z,1510149852.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:12.662Z,1510149852.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:12.970Z,1510149852.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:12.987Z,1510149852.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:13.382Z,1510149853.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:13.435Z,1510149853.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:14.063Z,1510149854.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:14.081Z,1510149854.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:14.185Z,1510149854.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:14.209Z,1510149854.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:14.618Z,1510149854.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:14.635Z,1510149854.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:15.002Z,1510149855.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:15.036Z,1510149855.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:15.402Z,1510149855.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:15.430Z,1510149855.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:15.788Z,1510149855.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:15.805Z,1510149855.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:16.189Z,1510149856.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:16.205Z,1510149856.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:16.619Z,1510149856.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:16.635Z,1510149856.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:17.005Z,1510149857.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:17.033Z,1510149857.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:17.683Z,1510149857.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:17.699Z,1510149857.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:17.797Z,1510149857.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:17.821Z,1510149857.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:18.230Z,1510149858.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:18.252Z,1510149858.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:18.614Z,1510149858.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:18.647Z,1510149858.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:19.009Z,1510149859.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:19.036Z,1510149859.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:19.403Z,1510149859.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:19.432Z,1510149859.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:19.804Z,1510149859.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:19.820Z,1510149859.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:20.232Z,1510149860.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:20.248Z,1510149860.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:20.603Z,1510149860.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:20.620Z,1510149860.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:21.002Z,1510149861.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:21.019Z,1510149861.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:21.413Z,1510149861.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:21.460Z,1510149861.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:22.098Z,1510149862.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:22.119Z,1510149862.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:22.256Z,1510149862.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:22.295Z,1510149862.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:22.666Z,1510149862.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:22.698Z,1510149862.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:23.068Z,1510149863.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:23.099Z,1510149863.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:23.466Z,1510149863.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:23.498Z,1510149863.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:23.855Z,1510149863.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:23.875Z,1510149863.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:24.254Z,1510149864.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:24.270Z,1510149864.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:24.654Z,1510149864.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:24.671Z,1510149864.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:25.055Z,1510149865.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:25.076Z,1510149865.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:25.477Z,1510149865.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:25.501Z,1510149865.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:25.862Z,1510149865.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:25.878Z,1510149865.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:26.547Z,1510149866.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:26.568Z,1510149866.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:26.673Z,1510149866.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:26.705Z,1510149866.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:27.100Z,1510149867.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:27.116Z,1510149867.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:27.495Z,1510149867.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:27.511Z,1510149867.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:27.896Z,1510149867.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:27.913Z,1510149867.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:28.280Z,1510149868.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:28.308Z,1510149868.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:28.679Z,1510149868.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:28.710Z,1510149868.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:29.080Z,1510149869.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:29.111Z,1510149869.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:29.510Z,1510149869.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:29.532Z,1510149869.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:29.879Z,1510149869.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:29.909Z,1510149869.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:30.300Z,1510149870.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:30.316Z,1510149870.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:31.008Z,1510149871.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:31.027Z,1510149871.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:31.171Z,1510149871.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:31.215Z,1510149871.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:31.586Z,1510149871.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:31.625Z,1510149871.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:31.986Z,1510149871.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:32.018Z,1510149872.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:32.382Z,1510149872.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:32.409Z,1510149872.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:32.776Z,1510149872.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:32.812Z,1510149872.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:33.172Z,1510149873.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:33.239Z,1510149873.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:33.593Z,1510149873.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:33.638Z,1510149873.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:33.985Z,1510149873.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:34.018Z,1510149874.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:34.667Z,1510149874.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:34.714Z,1510149874.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:34.825Z,1510149874.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:34.873Z,1510149874.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:35.246Z,1510149875.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:35.313Z,1510149875.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:35.642Z,1510149875.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:35.681Z,1510149875.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:36.038Z,1510149876.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:36.075Z,1510149876.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:36.435Z,1510149876.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:36.451Z,1510149876.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:36.834Z,1510149876.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:36.850Z,1510149876.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:37.263Z,1510149877.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:37.280Z,1510149877.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:37.634Z,1510149877.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:37.651Z,1510149877.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:38.034Z,1510149878.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:38.051Z,1510149878.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:38.445Z,1510149878.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:38.478Z,1510149878.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:39.131Z,1510149879.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:39.146Z,1510149879.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:39.249Z,1510149879.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:39.295Z,1510149879.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:39.670Z,1510149879.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:39.696Z,1510149879.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:40.074Z,1510149880.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:40.089Z,1510149880.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:40.473Z,1510149880.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:40.489Z,1510149880.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:40.851Z,1510149880.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:40.887Z,1510149880.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:41.252Z,1510149881.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:41.292Z,1510149881.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:41.678Z,1510149881.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:41.699Z,1510149881.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:42.077Z,1510149882.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:42.093Z,1510149882.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:42.739Z,1510149882.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:42.755Z,1510149882.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:42.853Z,1510149882.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:42.899Z,1510149882.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:43.276Z,1510149883.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:43.292Z,1510149883.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:43.677Z,1510149883.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:43.717Z,1510149883.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:44.076Z,1510149884.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:44.097Z,1510149884.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:44.463Z,1510149884.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:44.496Z,1510149884.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:44.860Z,1510149884.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:44.892Z,1510149884.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:45.288Z,1510149885.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:45.308Z,1510149885.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:45.659Z,1510149885.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:45.695Z,1510149885.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:46.055Z,1510149886.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:46.091Z,1510149886.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:46.481Z,1510149886.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:46.497Z,1510149886.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:47.154Z,1510149887.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:47.170Z,1510149887.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:47.308Z,1510149887.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:47.337Z,1510149887.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:47.735Z,1510149887.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:47.752Z,1510149887.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:48.133Z,1510149888.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:48.149Z,1510149888.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:48.532Z,1510149888.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:48.549Z,1510149888.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:48.913Z,1510149888.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:48.945Z,1510149888.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:49.315Z,1510149889.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:49.351Z,1510149889.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:49.713Z,1510149889.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:49.743Z,1510149889.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:50.115Z,1510149890.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:50.131Z,1510149890.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:50.544Z,1510149890.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:50.560Z,1510149890.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:50.929Z,1510149890.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:50.958Z,1510149890.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:51.614Z,1510149891.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:51.635Z,1510149891.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:51.767Z,1510149891.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:51.804Z,1510149891.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:52.187Z,1510149892.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:52.220Z,1510149892.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:52.586Z,1510149892.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:52.624Z,1510149892.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:52.978Z,1510149892.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:53.016Z,1510149893.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:53.373Z,1510149893.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:53.398Z,1510149893.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:53.767Z,1510149893.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:53.788Z,1510149893.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:54.171Z,1510149894.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:54.196Z,1510149894.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:54.598Z,1510149894.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:54.628Z,1510149894.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:54.975Z,1510149894.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:54.991Z,1510149894.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:55.382Z,1510149895.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:55.425Z,1510149895.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:56.064Z,1510149896.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:56.101Z,1510149896.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:56.237Z,1510149896.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:56.254Z,1510149896.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:56.654Z,1510149896.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:56.723Z,1510149896.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:57.053Z,1510149897.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:57.082Z,1510149897.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:57.454Z,1510149897.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:57.526Z,1510149897.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:57.844Z,1510149897.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:57.877Z,1510149897.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:58.276Z,1510149898.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:58.292Z,1510149898.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:58.658Z,1510149898.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:58.684Z,1510149898.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:59.334Z,1510149899.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:59.350Z,1510149899.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:59.453Z,1510149899.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:59.496Z,1510149899.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:59.881Z,1510149899.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:04:59.897Z,1510149899.897 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:59.897Z,1510149899.897 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2017-11-08T14:04:59.898Z,1510149899.898 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T14:04:59.899Z,1510149899.899 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:59.899Z,1510149899.899 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2017-11-08T14:04:59.899Z,1510149899.899 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T14:04:59.901Z,1510149899.901 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:04:59.901Z,1510149899.901 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2017-11-08T14:04:59.901Z,1510149899.901 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T14:04:59.981Z,1510149899.981 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T14:04:59.982Z,1510149899.982 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T14:04:59.982Z,1510149899.982 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T14:05:00.270Z,1510149900.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:00.378Z,1510149900.378 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T14:05:00.378Z,1510149900.378 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2017-11-08T14:05:00.378Z,1510149900.378 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T14:05:00.379Z,1510149900.379 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2017-11-08T14:05:00.379Z,1510149900.379 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T14:05:00.379Z,1510149900.379 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2017-11-08T14:05:00.670Z,1510149900.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:00.703Z,1510149900.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T14:05:00.704Z,1510149900.704 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:05:00.704Z,1510149900.704 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:05:00.704Z,1510149900.704 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T14:05:00.705Z,1510149900.705 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:05:00.705Z,1510149900.705 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:05:00.706Z,1510149900.706 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T14:05:00.706Z,1510149900.706 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:05:00.706Z,1510149900.706 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:05:01.055Z,1510149901.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:01.091Z,1510149901.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T14:05:01.092Z,1510149901.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:01.455Z,1510149901.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:01.470Z,1510149901.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T14:05:01.471Z,1510149901.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:01.855Z,1510149901.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:01.871Z,1510149901.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T14:05:01.872Z,1510149901.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:02.288Z,1510149902.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:02.311Z,1510149902.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T14:05:02.312Z,1510149902.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:02.655Z,1510149902.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:02.670Z,1510149902.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T14:05:02.671Z,1510149902.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:03.069Z,1510149903.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:03.093Z,1510149903.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T14:05:03.094Z,1510149903.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:03.757Z,1510149903.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:03.773Z,1510149903.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-11-08T14:05:03.774Z,1510149903.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:03.872Z,1510149903.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:03.915Z,1510149903.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T14:05:03.916Z,1510149903.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:04.301Z,1510149904.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:04.317Z,1510149904.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T14:05:04.318Z,1510149904.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:04.695Z,1510149904.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:04.711Z,1510149904.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T14:05:04.712Z,1510149904.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:05.095Z,1510149905.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:05.112Z,1510149905.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T14:05:05.113Z,1510149905.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:05.475Z,1510149905.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:05.507Z,1510149905.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T14:05:05.508Z,1510149905.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:05.876Z,1510149905.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:05.923Z,1510149905.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T14:05:05.924Z,1510149905.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:06.303Z,1510149906.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:06.320Z,1510149906.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T14:05:06.321Z,1510149906.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:06.699Z,1510149906.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:06.715Z,1510149906.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T14:05:06.717Z,1510149906.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:07.370Z,1510149907.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:07.408Z,1510149907.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2017-11-08T14:05:07.409Z,1510149907.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:07.515Z,1510149907.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:07.555Z,1510149907.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T14:05:07.556Z,1510149907.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:07.930Z,1510149907.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:07.954Z,1510149907.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T14:05:07.955Z,1510149907.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:08.330Z,1510149908.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:08.359Z,1510149908.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T14:05:08.361Z,1510149908.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:08.730Z,1510149908.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:08.759Z,1510149908.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T14:05:08.761Z,1510149908.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:09.119Z,1510149909.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:09.139Z,1510149909.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T14:05:09.156Z,1510149909.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:09.514Z,1510149909.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:09.530Z,1510149909.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T14:05:09.531Z,1510149909.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:09.915Z,1510149909.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:09.930Z,1510149909.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T14:05:09.931Z,1510149909.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:10.341Z,1510149910.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:10.365Z,1510149910.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T14:05:10.366Z,1510149910.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:10.718Z,1510149910.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:10.734Z,1510149910.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T14:05:10.735Z,1510149910.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:11.133Z,1510149911.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:11.148Z,1510149911.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T14:05:11.149Z,1510149911.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:11.810Z,1510149911.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:11.844Z,1510149911.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2017-11-08T14:05:11.845Z,1510149911.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:11.954Z,1510149911.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:12.003Z,1510149912.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T14:05:12.004Z,1510149912.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:12.370Z,1510149912.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:12.402Z,1510149912.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T14:05:12.403Z,1510149912.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:12.769Z,1510149912.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:12.799Z,1510149912.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T14:05:12.800Z,1510149912.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:13.170Z,1510149913.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:13.199Z,1510149913.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T14:05:13.201Z,1510149913.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:13.559Z,1510149913.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:13.594Z,1510149913.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T14:05:13.595Z,1510149913.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:13.960Z,1510149913.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:13.995Z,1510149913.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T14:05:13.996Z,1510149913.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:14.388Z,1510149914.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:14.404Z,1510149914.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T14:05:14.405Z,1510149914.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:14.780Z,1510149914.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:14.797Z,1510149914.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T14:05:14.798Z,1510149914.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:15.446Z,1510149915.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:15.461Z,1510149915.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T14:05:15.462Z,1510149915.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:15.597Z,1510149915.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:15.638Z,1510149915.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T14:05:15.639Z,1510149915.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:15.998Z,1510149915.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:16.014Z,1510149916.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T14:05:16.015Z,1510149916.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:16.396Z,1510149916.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:16.419Z,1510149916.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T14:05:16.420Z,1510149916.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:16.802Z,1510149916.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:16.818Z,1510149916.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T14:05:16.819Z,1510149916.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:17.192Z,1510149917.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:17.215Z,1510149917.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T14:05:17.216Z,1510149917.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:17.593Z,1510149917.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:17.609Z,1510149917.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T14:05:17.610Z,1510149917.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:17.990Z,1510149917.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:18.060Z,1510149918.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-08T14:05:18.065Z,1510149918.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:18.410Z,1510149918.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:18.426Z,1510149918.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T14:05:18.427Z,1510149918.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:18.794Z,1510149918.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:18.832Z,1510149918.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T14:05:18.849Z,1510149918.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:19.204Z,1510149919.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:19.220Z,1510149919.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T14:05:19.221Z,1510149919.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:19.888Z,1510149919.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:19.951Z,1510149919.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:20.061Z,1510149920.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:20.108Z,1510149920.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:20.478Z,1510149920.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:20.516Z,1510149920.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:20.881Z,1510149920.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:20.915Z,1510149920.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:21.288Z,1510149921.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:21.315Z,1510149921.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:21.671Z,1510149921.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:21.718Z,1510149921.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:22.067Z,1510149922.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:22.083Z,1510149922.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:22.496Z,1510149922.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:22.525Z,1510149922.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:22.889Z,1510149922.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:22.906Z,1510149922.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:23.558Z,1510149923.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:23.583Z,1510149923.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:23.705Z,1510149923.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:23.736Z,1510149923.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:24.111Z,1510149924.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:24.143Z,1510149924.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:24.519Z,1510149924.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:24.535Z,1510149924.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:24.911Z,1510149924.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:24.952Z,1510149924.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:25.295Z,1510149925.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:25.347Z,1510149925.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:25.697Z,1510149925.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:25.704Z,1510149925.704 [PNI_TCM](ERROR): CRC does not match. Expected:0x55422 got:0x49792
2017-11-08T14:05:25.742Z,1510149925.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:26.102Z,1510149926.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:26.126Z,1510149926.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:26.533Z,1510149926.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:26.550Z,1510149926.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:26.895Z,1510149926.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:26.937Z,1510149926.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:27.315Z,1510149927.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:27.322Z,1510149927.322 [PNI_TCM](ERROR): CRC does not match. Expected:0x33565 got:0x34691
2017-11-08T14:05:27.352Z,1510149927.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:27.993Z,1510149927.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:28.043Z,1510149928.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:28.154Z,1510149928.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:28.171Z,1510149928.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:28.575Z,1510149928.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:28.608Z,1510149928.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:28.974Z,1510149928.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:29.004Z,1510149929.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:29.370Z,1510149929.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:29.396Z,1510149929.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:29.759Z,1510149929.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:29.797Z,1510149929.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:30.160Z,1510149930.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:30.178Z,1510149930.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:30.582Z,1510149930.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:30.607Z,1510149930.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:30.974Z,1510149930.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:31.011Z,1510149931.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:31.647Z,1510149931.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:31.663Z,1510149931.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:31.773Z,1510149931.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:31.798Z,1510149931.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:32.200Z,1510149932.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:32.232Z,1510149932.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:32.593Z,1510149932.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:32.627Z,1510149932.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:32.989Z,1510149932.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:33.019Z,1510149933.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:33.380Z,1510149933.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:33.430Z,1510149933.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:33.783Z,1510149933.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:33.804Z,1510149933.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:34.183Z,1510149934.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:34.199Z,1510149934.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:34.606Z,1510149934.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:34.632Z,1510149934.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:34.980Z,1510149934.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:34.996Z,1510149934.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:35.393Z,1510149935.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:35.426Z,1510149935.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:36.072Z,1510149936.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:36.088Z,1510149936.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:36.203Z,1510149936.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:36.243Z,1510149936.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:36.586Z,1510149936.586 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T14:05:36.586Z,1510149936.586 [NAL9602] Data Fault, FailCount= 5
2017-11-08T14:05:36.586Z,1510149936.586 [NAL9602](ERROR): Data Fault
2017-11-08T14:05:36.604Z,1510149936.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:36.649Z,1510149936.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:36.733Z,1510149936.733 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T14:05:36.733Z,1510149936.733 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-11-08T14:05:36.982Z,1510149936.982 [NAL9602](INFO): Powering down
2017-11-08T14:05:36.999Z,1510149936.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:37.035Z,1510149937.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:37.124Z,1510149937.124 [CommandLine](FAULT): Scheduling is paused
2017-11-08T14:05:37.125Z,1510149937.125 [CBIT](INFO): Critical error at 20171108T140536
2017-11-08T14:05:37.125Z,1510149937.125 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2017-11-08T14:05:37.399Z,1510149937.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:37.415Z,1510149937.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:37.802Z,1510149937.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:37.843Z,1510149937.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:38.202Z,1510149938.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:38.219Z,1510149938.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:38.602Z,1510149938.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:38.619Z,1510149938.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:39.006Z,1510149939.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:39.022Z,1510149939.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:39.406Z,1510149939.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:39.422Z,1510149939.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:39.806Z,1510149939.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:39.822Z,1510149939.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:40.205Z,1510149940.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:40.295Z,1510149940.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:40.606Z,1510149940.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:40.622Z,1510149940.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:41.006Z,1510149941.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:41.056Z,1510149941.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:41.406Z,1510149941.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:41.421Z,1510149941.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:41.805Z,1510149941.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:41.851Z,1510149941.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:42.206Z,1510149942.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:42.222Z,1510149942.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:42.605Z,1510149942.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:42.621Z,1510149942.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:43.005Z,1510149943.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:43.021Z,1510149943.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:43.406Z,1510149943.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:43.422Z,1510149943.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:43.803Z,1510149943.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:43.820Z,1510149943.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:44.207Z,1510149944.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:44.279Z,1510149944.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:44.598Z,1510149944.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:44.666Z,1510149944.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:45.008Z,1510149945.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:45.024Z,1510149945.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:45.408Z,1510149945.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:45.424Z,1510149945.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:45.804Z,1510149945.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:45.821Z,1510149945.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:46.206Z,1510149946.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:46.222Z,1510149946.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:46.609Z,1510149946.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:46.631Z,1510149946.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:47.004Z,1510149947.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:47.021Z,1510149947.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:47.408Z,1510149947.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:47.424Z,1510149947.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:47.808Z,1510149947.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:47.831Z,1510149947.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:48.204Z,1510149948.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:48.221Z,1510149948.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:48.608Z,1510149948.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:48.624Z,1510149948.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:49.009Z,1510149949.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:49.025Z,1510149949.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:49.408Z,1510149949.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:49.425Z,1510149949.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:49.808Z,1510149949.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:49.824Z,1510149949.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:50.201Z,1510149950.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:50.258Z,1510149950.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:50.608Z,1510149950.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:50.627Z,1510149950.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:51.007Z,1510149951.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:51.023Z,1510149951.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:51.409Z,1510149951.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:51.425Z,1510149951.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:51.809Z,1510149951.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:51.825Z,1510149951.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:52.209Z,1510149952.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:52.225Z,1510149952.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:52.613Z,1510149952.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:52.629Z,1510149952.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:53.005Z,1510149953.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:53.022Z,1510149953.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:53.409Z,1510149953.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:53.424Z,1510149953.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:53.813Z,1510149953.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:53.829Z,1510149953.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:54.205Z,1510149954.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:54.222Z,1510149954.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:54.605Z,1510149954.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:54.627Z,1510149954.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:55.009Z,1510149955.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:55.026Z,1510149955.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:55.409Z,1510149955.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:55.426Z,1510149955.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:55.809Z,1510149955.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:55.825Z,1510149955.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:56.208Z,1510149956.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:56.225Z,1510149956.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:56.605Z,1510149956.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:56.628Z,1510149956.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:57.008Z,1510149957.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:57.025Z,1510149957.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:57.408Z,1510149957.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:57.426Z,1510149957.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:57.805Z,1510149957.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:57.822Z,1510149957.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:58.208Z,1510149958.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:58.225Z,1510149958.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:58.608Z,1510149958.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:58.625Z,1510149958.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:59.002Z,1510149959.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:59.032Z,1510149959.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:59.408Z,1510149959.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:59.425Z,1510149959.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:05:59.807Z,1510149959.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:05:59.824Z,1510149959.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:00.208Z,1510149960.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:00.225Z,1510149960.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:00.610Z,1510149960.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:00.626Z,1510149960.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:01.001Z,1510149961.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:01.032Z,1510149961.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:01.405Z,1510149961.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:01.421Z,1510149961.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:01.809Z,1510149961.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:01.825Z,1510149961.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:02.209Z,1510149962.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:02.232Z,1510149962.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:02.605Z,1510149962.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:02.698Z,1510149962.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:03.008Z,1510149963.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:03.024Z,1510149963.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:03.413Z,1510149963.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:03.471Z,1510149963.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:03.809Z,1510149963.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:03.825Z,1510149963.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:04.210Z,1510149964.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:04.266Z,1510149964.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:04.613Z,1510149964.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:04.631Z,1510149964.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:05.005Z,1510149965.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:05.021Z,1510149965.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:05.410Z,1510149965.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:05.426Z,1510149965.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:05.806Z,1510149965.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:05.822Z,1510149965.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:06.208Z,1510149966.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:06.225Z,1510149966.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:06.608Z,1510149966.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:06.625Z,1510149966.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:07.004Z,1510149967.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:07.021Z,1510149967.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:07.408Z,1510149967.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:07.425Z,1510149967.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:07.808Z,1510149967.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:07.824Z,1510149967.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:08.205Z,1510149968.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:08.221Z,1510149968.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:08.609Z,1510149968.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:08.625Z,1510149968.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:09.009Z,1510149969.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:09.024Z,1510149969.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:09.405Z,1510149969.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:09.420Z,1510149969.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:09.809Z,1510149969.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:09.825Z,1510149969.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:10.209Z,1510149970.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:10.232Z,1510149970.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:10.607Z,1510149970.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:10.623Z,1510149970.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:11.005Z,1510149971.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:11.021Z,1510149971.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:11.409Z,1510149971.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:11.425Z,1510149971.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:11.805Z,1510149971.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:11.821Z,1510149971.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:12.205Z,1510149972.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:12.222Z,1510149972.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:12.609Z,1510149972.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:12.661Z,1510149972.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:13.006Z,1510149973.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:13.022Z,1510149973.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:13.404Z,1510149973.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:13.421Z,1510149973.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:13.808Z,1510149973.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:13.825Z,1510149973.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:14.208Z,1510149974.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:14.225Z,1510149974.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:14.604Z,1510149974.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:14.621Z,1510149974.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:15.008Z,1510149975.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:15.024Z,1510149975.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:15.408Z,1510149975.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:15.424Z,1510149975.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:15.804Z,1510149975.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:15.821Z,1510149975.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:16.210Z,1510149976.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:16.228Z,1510149976.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:16.608Z,1510149976.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:16.624Z,1510149976.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:17.004Z,1510149977.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:17.021Z,1510149977.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:17.408Z,1510149977.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:17.424Z,1510149977.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:17.805Z,1510149977.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:17.821Z,1510149977.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:18.204Z,1510149978.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:18.221Z,1510149978.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:18.608Z,1510149978.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:18.624Z,1510149978.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:19.005Z,1510149979.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:19.021Z,1510149979.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:19.405Z,1510149979.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:19.421Z,1510149979.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:19.808Z,1510149979.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:19.827Z,1510149979.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:20.204Z,1510149980.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:20.227Z,1510149980.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:20.609Z,1510149980.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:20.625Z,1510149980.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:21.008Z,1510149981.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:21.024Z,1510149981.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:21.409Z,1510149981.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:21.425Z,1510149981.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:21.809Z,1510149981.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:21.825Z,1510149981.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:22.209Z,1510149982.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:22.232Z,1510149982.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:22.608Z,1510149982.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:22.624Z,1510149982.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:23.006Z,1510149983.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:23.027Z,1510149983.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:23.406Z,1510149983.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:23.434Z,1510149983.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:23.808Z,1510149983.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:23.824Z,1510149983.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:24.208Z,1510149984.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:24.224Z,1510149984.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:24.608Z,1510149984.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:24.705Z,1510149984.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:24.998Z,1510149984.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:25.034Z,1510149985.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:25.403Z,1510149985.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:25.452Z,1510149985.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:25.803Z,1510149985.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:25.835Z,1510149985.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:26.198Z,1510149986.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:26.240Z,1510149986.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:26.602Z,1510149986.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:26.634Z,1510149986.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:27.001Z,1510149987.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:27.033Z,1510149987.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:27.402Z,1510149987.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:27.433Z,1510149987.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:27.803Z,1510149987.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:27.834Z,1510149987.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:28.203Z,1510149988.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:28.233Z,1510149988.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:28.598Z,1510149988.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:28.634Z,1510149988.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:29.003Z,1510149989.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:29.037Z,1510149989.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:29.402Z,1510149989.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:29.434Z,1510149989.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:29.802Z,1510149989.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:29.818Z,1510149989.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:30.203Z,1510149990.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:30.244Z,1510149990.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:30.602Z,1510149990.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:30.618Z,1510149990.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:30.998Z,1510149990.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:31.014Z,1510149991.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:31.407Z,1510149991.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:31.442Z,1510149991.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:31.807Z,1510149991.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:31.842Z,1510149991.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:32.203Z,1510149992.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:32.218Z,1510149992.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:32.603Z,1510149992.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:32.620Z,1510149992.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:33.003Z,1510149993.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:33.019Z,1510149993.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:33.403Z,1510149993.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:33.419Z,1510149993.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:33.802Z,1510149993.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:33.818Z,1510149993.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:34.203Z,1510149994.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:34.224Z,1510149994.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:34.606Z,1510149994.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:34.657Z,1510149994.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:35.005Z,1510149995.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:35.022Z,1510149995.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:35.403Z,1510149995.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:35.425Z,1510149995.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:35.806Z,1510149995.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:35.823Z,1510149995.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:36.207Z,1510149996.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:36.245Z,1510149996.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:36.606Z,1510149996.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:36.622Z,1510149996.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:37.006Z,1510149997.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:37.022Z,1510149997.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:37.406Z,1510149997.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:37.423Z,1510149997.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:37.806Z,1510149997.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:37.823Z,1510149997.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:38.207Z,1510149998.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:38.222Z,1510149998.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:38.606Z,1510149998.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:38.623Z,1510149998.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:39.006Z,1510149999.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:39.023Z,1510149999.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:39.406Z,1510149999.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:39.422Z,1510149999.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:39.806Z,1510149999.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:39.823Z,1510149999.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:40.208Z,1510150000.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:40.227Z,1510150000.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:40.606Z,1510150000.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:40.622Z,1510150000.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:41.003Z,1510150001.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:41.019Z,1510150001.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:41.411Z,1510150001.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:41.428Z,1510150001.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:41.802Z,1510150001.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:41.818Z,1510150001.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:42.206Z,1510150002.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:42.223Z,1510150002.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:42.607Z,1510150002.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:42.623Z,1510150002.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:43.006Z,1510150003.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:43.022Z,1510150003.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:43.407Z,1510150003.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:43.423Z,1510150003.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:43.807Z,1510150003.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:43.823Z,1510150003.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:44.206Z,1510150004.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:44.223Z,1510150004.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:44.606Z,1510150004.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:44.623Z,1510150004.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:45.006Z,1510150005.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:45.023Z,1510150005.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:45.406Z,1510150005.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:45.423Z,1510150005.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:45.806Z,1510150005.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:45.822Z,1510150005.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:46.206Z,1510150006.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:46.289Z,1510150006.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:46.606Z,1510150006.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:46.670Z,1510150006.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:47.004Z,1510150007.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:47.020Z,1510150007.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:47.407Z,1510150007.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:47.460Z,1510150007.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:47.806Z,1510150007.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:47.822Z,1510150007.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:48.204Z,1510150008.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:48.263Z,1510150008.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:48.606Z,1510150008.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:48.623Z,1510150008.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:49.006Z,1510150009.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:49.022Z,1510150009.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:49.410Z,1510150009.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:49.426Z,1510150009.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:49.807Z,1510150009.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:49.828Z,1510150009.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:50.205Z,1510150010.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:50.221Z,1510150010.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:50.604Z,1510150010.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:50.620Z,1510150010.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:51.006Z,1510150011.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:51.023Z,1510150011.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:51.404Z,1510150011.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:51.423Z,1510150011.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:51.803Z,1510150011.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:51.820Z,1510150011.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:52.206Z,1510150012.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:52.223Z,1510150012.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:52.604Z,1510150012.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:52.620Z,1510150012.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:53.004Z,1510150013.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:53.021Z,1510150013.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:53.406Z,1510150013.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:53.427Z,1510150013.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:53.804Z,1510150013.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:53.820Z,1510150013.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:54.204Z,1510150014.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:54.220Z,1510150014.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:54.606Z,1510150014.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:54.627Z,1510150014.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:55.004Z,1510150015.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:55.027Z,1510150015.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:55.407Z,1510150015.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:55.424Z,1510150015.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:55.806Z,1510150015.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:55.827Z,1510150015.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:56.204Z,1510150016.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:56.227Z,1510150016.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:56.607Z,1510150016.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:56.664Z,1510150016.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:57.008Z,1510150017.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:57.024Z,1510150017.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:57.404Z,1510150017.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:57.427Z,1510150017.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:57.807Z,1510150017.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:57.824Z,1510150017.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:58.209Z,1510150018.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:58.225Z,1510150018.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:58.604Z,1510150018.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:58.628Z,1510150018.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:59.004Z,1510150019.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:59.021Z,1510150019.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:59.409Z,1510150019.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:59.425Z,1510150019.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:06:59.804Z,1510150019.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:06:59.820Z,1510150019.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:00.204Z,1510150020.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:00.220Z,1510150020.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:00.609Z,1510150020.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:00.625Z,1510150020.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:01.004Z,1510150021.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:01.020Z,1510150021.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:01.404Z,1510150021.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:01.428Z,1510150021.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:01.807Z,1510150021.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:01.824Z,1510150021.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:02.204Z,1510150022.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:02.220Z,1510150022.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:02.608Z,1510150022.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:02.625Z,1510150022.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:03.009Z,1510150023.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:03.025Z,1510150023.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:03.404Z,1510150023.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:03.427Z,1510150023.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:03.809Z,1510150023.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:03.825Z,1510150023.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:04.209Z,1510150024.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:04.225Z,1510150024.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:04.602Z,1510150024.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:04.631Z,1510150024.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:05.009Z,1510150025.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:05.025Z,1510150025.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:05.409Z,1510150025.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:05.425Z,1510150025.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:05.802Z,1510150025.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:05.830Z,1510150025.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:06.208Z,1510150026.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:06.225Z,1510150026.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:06.609Z,1510150026.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:06.625Z,1510150026.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:07.004Z,1510150027.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:07.027Z,1510150027.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:07.408Z,1510150027.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:07.425Z,1510150027.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:07.809Z,1510150027.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:07.826Z,1510150027.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:08.203Z,1510150028.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:08.237Z,1510150028.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:08.605Z,1510150028.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:08.672Z,1510150028.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:09.006Z,1510150029.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:09.028Z,1510150029.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:09.398Z,1510150029.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:09.424Z,1510150029.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:09.798Z,1510150029.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:09.862Z,1510150029.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:10.206Z,1510150030.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:10.228Z,1510150030.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:10.598Z,1510150030.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:10.660Z,1510150030.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:10.999Z,1510150030.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:11.025Z,1510150031.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:11.407Z,1510150031.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:11.429Z,1510150031.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:11.799Z,1510150031.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:11.824Z,1510150031.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:12.199Z,1510150032.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:12.233Z,1510150032.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:12.607Z,1510150032.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:12.629Z,1510150032.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:12.998Z,1510150032.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:13.024Z,1510150033.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:13.398Z,1510150033.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:13.425Z,1510150033.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:13.808Z,1510150033.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:13.825Z,1510150033.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:14.210Z,1510150034.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:14.229Z,1510150034.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:14.598Z,1510150034.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:14.631Z,1510150034.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:15.007Z,1510150035.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:15.025Z,1510150035.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:15.408Z,1510150035.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:15.424Z,1510150035.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:15.798Z,1510150035.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:15.832Z,1510150035.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:16.202Z,1510150036.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:16.234Z,1510150036.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:16.598Z,1510150036.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:16.623Z,1510150036.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:16.998Z,1510150036.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:17.031Z,1510150037.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:17.403Z,1510150037.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:17.428Z,1510150037.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:17.802Z,1510150037.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:17.827Z,1510150037.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:18.198Z,1510150038.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:18.227Z,1510150038.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:18.603Z,1510150038.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:18.634Z,1510150038.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:19.002Z,1510150039.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:19.045Z,1510150039.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:19.406Z,1510150039.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:19.433Z,1510150039.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:19.803Z,1510150039.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:19.834Z,1510150039.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:20.221Z,1510150040.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:20.306Z,1510150040.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:20.603Z,1510150040.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:20.636Z,1510150040.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:21.003Z,1510150041.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:21.035Z,1510150041.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:21.403Z,1510150041.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:21.419Z,1510150041.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:21.802Z,1510150041.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:21.820Z,1510150041.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:22.202Z,1510150042.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:22.219Z,1510150042.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:22.598Z,1510150042.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:22.620Z,1510150042.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:23.006Z,1510150043.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:23.024Z,1510150043.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:23.402Z,1510150043.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:23.418Z,1510150043.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:23.802Z,1510150043.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:23.871Z,1510150043.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:24.200Z,1510150044.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:24.217Z,1510150044.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:24.602Z,1510150044.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:24.623Z,1510150044.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:25.002Z,1510150045.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:25.023Z,1510150045.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:25.406Z,1510150045.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:25.423Z,1510150045.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:25.805Z,1510150045.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:25.821Z,1510150045.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:26.206Z,1510150046.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:26.222Z,1510150046.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:26.606Z,1510150046.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:26.623Z,1510150046.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:27.006Z,1510150047.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:27.022Z,1510150047.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:27.406Z,1510150047.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:27.422Z,1510150047.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:27.802Z,1510150047.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:27.818Z,1510150047.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:28.206Z,1510150048.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:28.222Z,1510150048.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:28.606Z,1510150048.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:28.622Z,1510150048.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:29.006Z,1510150049.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:29.023Z,1510150049.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:29.406Z,1510150049.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:29.422Z,1510150049.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:29.806Z,1510150049.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:29.822Z,1510150049.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:30.205Z,1510150050.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:30.223Z,1510150050.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:30.606Z,1510150050.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:30.653Z,1510150050.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:31.001Z,1510150051.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:31.018Z,1510150051.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:31.405Z,1510150051.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:31.422Z,1510150051.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:31.805Z,1510150051.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:31.852Z,1510150051.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:32.205Z,1510150052.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:32.221Z,1510150052.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:32.605Z,1510150052.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:32.667Z,1510150052.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:33.005Z,1510150053.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:33.021Z,1510150053.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:33.405Z,1510150053.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:33.421Z,1510150053.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:33.803Z,1510150053.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:33.820Z,1510150053.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:34.205Z,1510150054.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:34.221Z,1510150054.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:34.605Z,1510150054.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:34.621Z,1510150054.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:35.003Z,1510150055.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:35.019Z,1510150055.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:35.405Z,1510150055.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:35.421Z,1510150055.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:35.805Z,1510150055.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:35.821Z,1510150055.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:36.204Z,1510150056.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:36.220Z,1510150056.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:36.605Z,1510150056.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:36.621Z,1510150056.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:36.693Z,1510150056.693 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T14:07:36.693Z,1510150056.693 [NAL9602] No Fault, FailCount= 5
2017-11-08T14:07:36.982Z,1510150056.982 [NAL9602](INFO): Powering up NAL9602
2017-11-08T14:07:37.002Z,1510150057.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:37.035Z,1510150057.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:37.405Z,1510150057.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:37.421Z,1510150057.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:37.808Z,1510150057.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:37.823Z,1510150057.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:38.208Z,1510150058.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:38.224Z,1510150058.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:38.609Z,1510150058.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:38.625Z,1510150058.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:39.005Z,1510150059.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:39.021Z,1510150059.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:39.405Z,1510150059.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:39.427Z,1510150059.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:39.805Z,1510150059.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:39.821Z,1510150059.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:40.208Z,1510150060.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:40.223Z,1510150060.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:40.609Z,1510150060.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:40.625Z,1510150060.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:41.005Z,1510150061.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:41.063Z,1510150061.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:41.409Z,1510150061.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:41.424Z,1510150061.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:41.809Z,1510150061.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:41.824Z,1510150061.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:42.209Z,1510150062.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:42.225Z,1510150062.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:42.608Z,1510150062.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:42.623Z,1510150062.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:43.009Z,1510150063.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:43.025Z,1510150063.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:43.405Z,1510150063.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:43.421Z,1510150063.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:43.808Z,1510150063.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:43.823Z,1510150063.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:44.209Z,1510150064.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:44.225Z,1510150064.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:44.609Z,1510150064.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:44.625Z,1510150064.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:45.008Z,1510150065.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:45.023Z,1510150065.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:45.409Z,1510150065.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:45.425Z,1510150065.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:45.806Z,1510150065.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:45.822Z,1510150065.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:46.208Z,1510150066.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:46.224Z,1510150066.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:46.609Z,1510150066.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:46.625Z,1510150066.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:47.005Z,1510150067.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:47.021Z,1510150067.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:47.408Z,1510150067.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:47.424Z,1510150067.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:47.814Z,1510150067.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:47.830Z,1510150067.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:48.186Z,1510150068.186 [NAL9602](INFO): NAL9602 initialized
2017-11-08T14:07:48.214Z,1510150068.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:48.239Z,1510150068.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:48.609Z,1510150068.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:48.626Z,1510150068.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:49.016Z,1510150069.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:49.040Z,1510150069.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:49.418Z,1510150069.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:49.434Z,1510150069.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:49.815Z,1510150069.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:49.836Z,1510150069.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:50.210Z,1510150070.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:50.231Z,1510150070.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:50.611Z,1510150070.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:50.631Z,1510150070.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:51.011Z,1510150071.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:51.027Z,1510150071.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:51.430Z,1510150071.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:51.458Z,1510150071.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:51.820Z,1510150071.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:51.889Z,1510150071.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:52.489Z,1510150072.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:52.514Z,1510150072.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:52.625Z,1510150072.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:52.648Z,1510150072.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:53.042Z,1510150073.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:53.091Z,1510150073.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:53.434Z,1510150073.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:53.451Z,1510150073.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:53.839Z,1510150073.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:53.871Z,1510150073.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:54.235Z,1510150074.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:54.291Z,1510150074.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:54.626Z,1510150074.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:54.642Z,1510150074.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:55.027Z,1510150075.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:55.084Z,1510150075.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:55.450Z,1510150075.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:55.473Z,1510150075.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:55.825Z,1510150075.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:55.841Z,1510150075.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:56.241Z,1510150076.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:56.278Z,1510150076.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:56.919Z,1510150076.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:56.939Z,1510150076.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:57.037Z,1510150077.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:57.088Z,1510150077.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:57.462Z,1510150077.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:57.485Z,1510150077.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:57.854Z,1510150077.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:57.887Z,1510150077.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:58.249Z,1510150078.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:58.281Z,1510150078.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:58.644Z,1510150078.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:58.660Z,1510150078.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:59.039Z,1510150079.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:59.060Z,1510150079.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:59.473Z,1510150079.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:59.491Z,1510150079.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:07:59.858Z,1510150079.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:07:59.883Z,1510150079.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:00.542Z,1510150080.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:00.558Z,1510150080.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:00.690Z,1510150080.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:00.730Z,1510150080.730 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:00.730Z,1510150080.730 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2017-11-08T14:08:00.730Z,1510150080.730 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T14:08:00.732Z,1510150080.732 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:00.732Z,1510150080.732 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2017-11-08T14:08:00.732Z,1510150080.732 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T14:08:00.734Z,1510150080.734 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:00.734Z,1510150080.734 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2017-11-08T14:08:00.734Z,1510150080.734 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T14:08:00.813Z,1510150080.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T14:08:00.813Z,1510150080.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T14:08:00.814Z,1510150080.814 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T14:08:01.106Z,1510150081.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:01.225Z,1510150081.225 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T14:08:01.225Z,1510150081.225 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2017-11-08T14:08:01.225Z,1510150081.225 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T14:08:01.225Z,1510150081.225 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2017-11-08T14:08:01.226Z,1510150081.226 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T14:08:01.226Z,1510150081.226 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2017-11-08T14:08:01.497Z,1510150081.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:01.513Z,1510150081.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T14:08:01.514Z,1510150081.514 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:08:01.514Z,1510150081.514 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:08:01.515Z,1510150081.515 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T14:08:01.515Z,1510150081.515 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:08:01.515Z,1510150081.515 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:08:01.516Z,1510150081.516 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T14:08:01.516Z,1510150081.516 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:08:01.517Z,1510150081.517 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:08:01.899Z,1510150081.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:01.916Z,1510150081.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T14:08:01.917Z,1510150081.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:02.291Z,1510150082.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:02.313Z,1510150082.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T14:08:02.313Z,1510150082.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:02.687Z,1510150082.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:02.707Z,1510150082.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T14:08:02.708Z,1510150082.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:03.091Z,1510150083.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:03.147Z,1510150083.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T14:08:03.148Z,1510150083.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:03.517Z,1510150083.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:03.547Z,1510150083.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T14:08:03.548Z,1510150083.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:03.893Z,1510150083.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:03.909Z,1510150083.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T14:08:03.910Z,1510150083.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:04.303Z,1510150084.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:04.319Z,1510150084.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T14:08:04.320Z,1510150084.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:04.974Z,1510150084.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:04.996Z,1510150084.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2017-11-08T14:08:04.997Z,1510150084.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:05.110Z,1510150085.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:05.158Z,1510150085.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T14:08:05.159Z,1510150085.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:05.526Z,1510150085.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:05.559Z,1510150085.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T14:08:05.560Z,1510150085.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:05.937Z,1510150085.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:05.954Z,1510150085.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T14:08:05.955Z,1510150085.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:06.326Z,1510150086.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:06.354Z,1510150086.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T14:08:06.354Z,1510150086.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:06.719Z,1510150086.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:06.739Z,1510150086.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T14:08:06.740Z,1510150086.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:07.119Z,1510150087.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:07.135Z,1510150087.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T14:08:07.136Z,1510150087.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:07.534Z,1510150087.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:07.558Z,1510150087.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T14:08:07.558Z,1510150087.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:07.933Z,1510150087.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:07.965Z,1510150087.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T14:08:07.966Z,1510150087.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:08.608Z,1510150088.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:08.623Z,1510150088.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2017-11-08T14:08:08.625Z,1510150088.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:08.737Z,1510150088.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:08.783Z,1510150088.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T14:08:08.784Z,1510150088.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:09.160Z,1510150089.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:09.176Z,1510150089.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T14:08:09.177Z,1510150089.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:09.564Z,1510150089.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:09.580Z,1510150089.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T14:08:09.581Z,1510150089.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:09.958Z,1510150089.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:09.983Z,1510150089.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T14:08:09.984Z,1510150089.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:10.343Z,1510150090.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:10.378Z,1510150090.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T14:08:10.379Z,1510150090.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:10.744Z,1510150090.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:10.772Z,1510150090.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T14:08:10.774Z,1510150090.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:11.144Z,1510150091.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:11.160Z,1510150091.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T14:08:11.177Z,1510150091.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:11.573Z,1510150091.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:11.589Z,1510150091.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T14:08:11.590Z,1510150091.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:11.944Z,1510150091.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:11.960Z,1510150091.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T14:08:11.961Z,1510150091.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:12.357Z,1510150092.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:12.390Z,1510150092.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T14:08:12.391Z,1510150092.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:13.038Z,1510150093.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:13.053Z,1510150093.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2017-11-08T14:08:13.054Z,1510150093.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:13.158Z,1510150093.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:13.195Z,1510150093.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T14:08:13.196Z,1510150093.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:13.588Z,1510150093.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:13.652Z,1510150093.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T14:08:13.657Z,1510150093.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:13.981Z,1510150093.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:14.003Z,1510150094.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T14:08:14.004Z,1510150094.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:14.382Z,1510150094.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:14.397Z,1510150094.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T14:08:14.398Z,1510150094.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:14.765Z,1510150094.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:14.798Z,1510150094.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T14:08:14.799Z,1510150094.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:15.192Z,1510150095.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:15.252Z,1510150095.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T14:08:15.254Z,1510150095.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:15.578Z,1510150095.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:15.602Z,1510150095.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T14:08:15.603Z,1510150095.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:16.258Z,1510150096.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:16.307Z,1510150096.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T14:08:16.308Z,1510150096.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:16.409Z,1510150096.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:16.450Z,1510150096.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T14:08:16.451Z,1510150096.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:16.836Z,1510150096.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:16.897Z,1510150096.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-08T14:08:16.898Z,1510150096.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:17.235Z,1510150097.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:17.251Z,1510150097.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T14:08:17.252Z,1510150097.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:17.629Z,1510150097.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:17.645Z,1510150097.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T14:08:17.646Z,1510150097.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:18.015Z,1510150098.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:18.043Z,1510150098.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T14:08:18.049Z,1510150098.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:18.416Z,1510150098.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:18.447Z,1510150098.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T14:08:18.448Z,1510150098.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:18.817Z,1510150098.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:18.847Z,1510150098.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T14:08:18.848Z,1510150098.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:19.248Z,1510150099.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:19.263Z,1510150099.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T14:08:19.264Z,1510150099.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:19.630Z,1510150099.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:19.651Z,1510150099.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T14:08:19.652Z,1510150099.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:20.294Z,1510150100.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:20.309Z,1510150100.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T14:08:20.310Z,1510150100.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:20.420Z,1510150100.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:20.467Z,1510150100.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-08T14:08:20.468Z,1510150100.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:20.839Z,1510150100.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:20.863Z,1510150100.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:21.237Z,1510150101.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:21.253Z,1510150101.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:21.633Z,1510150101.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:21.666Z,1510150101.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:22.015Z,1510150102.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:22.036Z,1510150102.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:22.415Z,1510150102.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:22.431Z,1510150102.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:22.820Z,1510150102.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:22.835Z,1510150102.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:23.249Z,1510150103.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:23.265Z,1510150103.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:23.633Z,1510150103.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:23.664Z,1510150103.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:24.351Z,1510150104.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:24.366Z,1510150104.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:24.477Z,1510150104.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:24.525Z,1510150104.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:24.902Z,1510150104.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:24.963Z,1510150104.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:25.305Z,1510150105.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:25.322Z,1510150105.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:25.700Z,1510150105.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:25.735Z,1510150105.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:26.084Z,1510150106.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:26.119Z,1510150106.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:26.483Z,1510150106.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:26.516Z,1510150106.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:26.882Z,1510150106.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:26.916Z,1510150106.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:27.315Z,1510150107.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:27.336Z,1510150107.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:27.683Z,1510150107.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:27.721Z,1510150107.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:28.100Z,1510150108.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:28.134Z,1510150108.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:28.774Z,1510150108.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:28.789Z,1510150108.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:28.891Z,1510150108.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:28.942Z,1510150108.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:29.317Z,1510150109.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:29.334Z,1510150109.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:29.716Z,1510150109.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:29.733Z,1510150109.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:30.110Z,1510150110.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:30.133Z,1510150110.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:30.495Z,1510150110.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:30.530Z,1510150110.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:30.902Z,1510150110.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:30.928Z,1510150110.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:31.328Z,1510150111.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:31.345Z,1510150111.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:31.716Z,1510150111.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:31.732Z,1510150111.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:32.386Z,1510150112.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:32.424Z,1510150112.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:32.539Z,1510150112.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:32.576Z,1510150112.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:32.954Z,1510150112.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:32.987Z,1510150112.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:33.353Z,1510150113.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:33.387Z,1510150113.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:33.766Z,1510150113.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:33.783Z,1510150113.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:34.140Z,1510150114.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:34.156Z,1510150114.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:34.539Z,1510150114.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:34.559Z,1510150114.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:34.944Z,1510150114.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:34.960Z,1510150114.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:35.372Z,1510150115.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:35.389Z,1510150115.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:35.742Z,1510150115.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:35.803Z,1510150115.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:36.155Z,1510150116.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:36.172Z,1510150116.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:36.836Z,1510150116.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:36.879Z,1510150116.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:37.016Z,1510150117.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:37.032Z,1510150117.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:37.430Z,1510150117.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:37.456Z,1510150117.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:37.829Z,1510150117.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:37.887Z,1510150117.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:38.225Z,1510150118.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:38.257Z,1510150118.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:38.616Z,1510150118.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:38.676Z,1510150118.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:39.016Z,1510150119.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:39.033Z,1510150119.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:39.443Z,1510150119.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:39.460Z,1510150119.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:39.830Z,1510150119.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:39.855Z,1510150119.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:40.497Z,1510150120.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:40.516Z,1510150120.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:40.621Z,1510150120.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:40.671Z,1510150120.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:41.049Z,1510150121.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:41.065Z,1510150121.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:41.445Z,1510150121.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:41.461Z,1510150121.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:41.833Z,1510150121.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:41.868Z,1510150121.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:42.227Z,1510150122.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:42.264Z,1510150122.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:42.623Z,1510150122.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:42.659Z,1510150122.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:43.028Z,1510150123.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:43.060Z,1510150123.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:43.464Z,1510150123.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:43.488Z,1510150123.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:43.823Z,1510150123.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:43.839Z,1510150123.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:44.238Z,1510150124.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:44.282Z,1510150124.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:45.306Z,1510150125.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:45.322Z,1510150125.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:45.433Z,1510150125.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:45.475Z,1510150125.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:45.856Z,1510150125.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:45.872Z,1510150125.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:46.256Z,1510150126.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:46.272Z,1510150126.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:46.650Z,1510150126.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:46.711Z,1510150126.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:47.044Z,1510150127.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:47.075Z,1510150127.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:47.439Z,1510150127.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:47.471Z,1510150127.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:47.840Z,1510150127.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:47.866Z,1510150127.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:48.267Z,1510150128.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:48.288Z,1510150128.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:48.661Z,1510150128.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:48.677Z,1510150128.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:49.329Z,1510150129.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:49.362Z,1510150129.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:49.479Z,1510150129.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:49.523Z,1510150129.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:49.894Z,1510150129.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:49.926Z,1510150129.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:50.290Z,1510150130.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:50.315Z,1510150130.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:50.690Z,1510150130.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:50.716Z,1510150130.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:51.079Z,1510150131.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:51.096Z,1510150131.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:51.483Z,1510150131.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:51.516Z,1510150131.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:51.880Z,1510150131.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:51.920Z,1510150131.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:52.311Z,1510150132.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:52.327Z,1510150132.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:52.678Z,1510150132.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:52.694Z,1510150132.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:53.094Z,1510150133.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:53.122Z,1510150133.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:53.806Z,1510150133.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:53.827Z,1510150133.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:53.938Z,1510150133.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:53.979Z,1510150133.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:54.364Z,1510150134.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:54.381Z,1510150134.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:54.765Z,1510150134.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:54.788Z,1510150134.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:55.154Z,1510150135.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:55.184Z,1510150135.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:55.544Z,1510150135.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:55.580Z,1510150135.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:55.944Z,1510150135.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:55.982Z,1510150135.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:56.371Z,1510150136.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:56.388Z,1510150136.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:56.758Z,1510150136.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:56.789Z,1510150136.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:57.434Z,1510150137.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:57.450Z,1510150137.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:57.574Z,1510150137.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:57.653Z,1510150137.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:57.978Z,1510150137.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:58.004Z,1510150138.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:58.385Z,1510150138.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:58.407Z,1510150138.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:58.781Z,1510150138.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:58.859Z,1510150138.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:59.163Z,1510150139.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:59.198Z,1510150139.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:59.563Z,1510150139.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:59.604Z,1510150139.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:08:59.960Z,1510150139.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:08:59.997Z,1510150139.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:00.396Z,1510150140.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:00.451Z,1510150140.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:00.759Z,1510150140.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:00.800Z,1510150140.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:01.173Z,1510150141.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:01.200Z,1510150141.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:01.858Z,1510150141.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:01.874Z,1510150141.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:02.004Z,1510150142.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:02.047Z,1510150142.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:02.410Z,1510150142.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:02.444Z,1510150142.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:02.813Z,1510150142.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:02.829Z,1510150142.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:03.210Z,1510150143.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:03.226Z,1510150143.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:03.602Z,1510150143.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:03.619Z,1510150143.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:04.001Z,1510150144.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:04.016Z,1510150144.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:04.421Z,1510150144.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:04.450Z,1510150144.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:04.813Z,1510150144.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:04.830Z,1510150144.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:05.521Z,1510150145.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:05.557Z,1510150145.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:05.666Z,1510150145.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:05.719Z,1510150145.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:06.082Z,1510150146.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:06.112Z,1510150146.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:06.481Z,1510150146.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:06.522Z,1510150146.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:06.884Z,1510150146.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:06.918Z,1510150146.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:07.272Z,1510150147.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:07.318Z,1510150147.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:07.671Z,1510150147.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:07.687Z,1510150147.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:08.072Z,1510150148.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:08.093Z,1510150148.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:08.496Z,1510150148.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:08.566Z,1510150148.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:08.886Z,1510150148.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:08.920Z,1510150148.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:09.560Z,1510150149.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:09.577Z,1510150149.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:09.689Z,1510150149.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:09.728Z,1510150149.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:10.099Z,1510150150.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:10.126Z,1510150150.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:10.497Z,1510150150.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:10.539Z,1510150150.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:10.904Z,1510150150.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:10.920Z,1510150150.920 [PNI_TCM](ERROR): CRC does not match. Expected:0x38942 got:0x33245
2017-11-08T14:09:10.947Z,1510150150.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:11.283Z,1510150151.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:11.323Z,1510150151.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:11.689Z,1510150151.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:11.696Z,1510150151.696 [PNI_TCM](ERROR): CRC does not match. Expected:0x21115 got:0x7490
2017-11-08T14:09:11.732Z,1510150151.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:12.092Z,1510150152.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:12.135Z,1510150152.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:12.514Z,1510150152.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:12.535Z,1510150152.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:12.900Z,1510150152.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:12.933Z,1510150152.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:13.581Z,1510150153.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:13.597Z,1510150153.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:13.697Z,1510150153.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:13.744Z,1510150153.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:14.122Z,1510150154.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:14.145Z,1510150154.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:14.520Z,1510150154.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:14.536Z,1510150154.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:14.927Z,1510150154.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:14.943Z,1510150154.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:15.304Z,1510150155.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:15.339Z,1510150155.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:15.701Z,1510150155.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:15.734Z,1510150155.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:16.102Z,1510150156.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:16.138Z,1510150156.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:16.535Z,1510150156.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:16.551Z,1510150156.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:16.899Z,1510150156.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:16.939Z,1510150156.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:17.321Z,1510150157.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:17.328Z,1510150157.328 [PNI_TCM](ERROR): CRC does not match. Expected:0x39165 got:0x12824
2017-11-08T14:09:17.356Z,1510150157.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:18.068Z,1510150158.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:18.089Z,1510150158.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:18.227Z,1510150158.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:18.248Z,1510150158.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:18.636Z,1510150158.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:18.687Z,1510150158.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:19.037Z,1510150159.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:19.059Z,1510150159.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:19.432Z,1510150159.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:19.506Z,1510150159.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:19.819Z,1510150159.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:19.846Z,1510150159.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:20.216Z,1510150160.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:20.241Z,1510150160.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:20.616Z,1510150160.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:20.641Z,1510150160.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:21.016Z,1510150161.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:21.092Z,1510150161.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:21.443Z,1510150161.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:21.460Z,1510150161.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:21.836Z,1510150161.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:21.853Z,1510150161.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:22.510Z,1510150162.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:22.559Z,1510150162.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:22.661Z,1510150162.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:22.700Z,1510150162.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:23.090Z,1510150163.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:23.151Z,1510150163.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:23.488Z,1510150163.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:23.504Z,1510150163.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:23.885Z,1510150163.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:23.902Z,1510150163.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:24.267Z,1510150164.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:24.303Z,1510150164.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:24.663Z,1510150164.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:24.691Z,1510150164.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:25.064Z,1510150165.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:25.093Z,1510150165.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:25.496Z,1510150165.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:25.513Z,1510150165.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:25.863Z,1510150165.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:25.879Z,1510150165.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:26.278Z,1510150166.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:26.313Z,1510150166.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:26.953Z,1510150166.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:26.970Z,1510150166.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:27.077Z,1510150167.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:27.111Z,1510150167.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:27.504Z,1510150167.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:27.521Z,1510150167.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:27.900Z,1510150167.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:27.924Z,1510150167.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:28.295Z,1510150168.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:28.312Z,1510150168.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:28.684Z,1510150168.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:28.717Z,1510150168.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:29.080Z,1510150169.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:29.112Z,1510150169.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:29.507Z,1510150169.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:29.524Z,1510150169.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:29.905Z,1510150169.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:29.922Z,1510150169.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:30.578Z,1510150170.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:30.594Z,1510150170.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:30.725Z,1510150170.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:30.768Z,1510150170.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:31.153Z,1510150171.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:31.216Z,1510150171.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:31.552Z,1510150171.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:31.569Z,1510150171.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:31.938Z,1510150171.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:31.971Z,1510150171.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:32.332Z,1510150172.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:32.357Z,1510150172.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:32.731Z,1510150172.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:32.752Z,1510150172.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:33.132Z,1510150173.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:33.156Z,1510150173.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:33.558Z,1510150173.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:33.587Z,1510150173.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:33.934Z,1510150173.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:33.950Z,1510150173.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:34.341Z,1510150174.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:34.357Z,1510150174.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:35.120Z,1510150175.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:35.136Z,1510150175.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:35.275Z,1510150175.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:35.307Z,1510150175.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:35.680Z,1510150175.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:35.698Z,1510150175.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:36.081Z,1510150176.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:36.126Z,1510150176.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:36.481Z,1510150176.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:36.501Z,1510150176.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:36.867Z,1510150176.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:36.894Z,1510150176.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:37.270Z,1510150177.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:37.291Z,1510150177.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:37.670Z,1510150177.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:37.692Z,1510150177.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:38.074Z,1510150178.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:38.099Z,1510150178.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:38.496Z,1510150178.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:38.530Z,1510150178.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:38.886Z,1510150178.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:38.908Z,1510150178.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:39.564Z,1510150179.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:39.581Z,1510150179.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:39.691Z,1510150179.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:39.744Z,1510150179.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:40.107Z,1510150180.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:40.122Z,1510150180.122 [PNI_TCM](ERROR): CRC does not match. Expected:0x32823 got:0x795
2017-11-08T14:09:40.151Z,1510150180.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:40.510Z,1510150180.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:40.544Z,1510150180.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:40.907Z,1510150180.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:40.937Z,1510150180.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:41.297Z,1510150181.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:41.332Z,1510150181.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:41.698Z,1510150181.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:41.714Z,1510150181.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:42.102Z,1510150182.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:42.119Z,1510150182.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:42.523Z,1510150182.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:42.592Z,1510150182.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:42.900Z,1510150182.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:42.918Z,1510150182.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:43.307Z,1510150183.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:43.354Z,1510150183.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:43.987Z,1510150183.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:44.004Z,1510150184.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:44.120Z,1510150184.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:44.149Z,1510150184.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:44.548Z,1510150184.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:44.603Z,1510150184.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:44.945Z,1510150184.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:44.962Z,1510150184.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:45.334Z,1510150185.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:45.399Z,1510150185.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:45.727Z,1510150185.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:45.764Z,1510150185.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:46.124Z,1510150186.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:46.157Z,1510150186.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:46.553Z,1510150186.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:46.570Z,1510150186.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:46.934Z,1510150186.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:46.961Z,1510150186.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:47.617Z,1510150187.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:47.633Z,1510150187.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:47.770Z,1510150187.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:47.786Z,1510150187.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:48.186Z,1510150188.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:48.214Z,1510150188.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:48.589Z,1510150188.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:48.617Z,1510150188.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:48.986Z,1510150188.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:49.013Z,1510150189.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:49.373Z,1510150189.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:49.415Z,1510150189.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:49.777Z,1510150189.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:49.823Z,1510150189.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:50.205Z,1510150190.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:50.222Z,1510150190.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:50.576Z,1510150190.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:50.593Z,1510150190.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:50.976Z,1510150190.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:50.993Z,1510150190.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:51.390Z,1510150191.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:51.418Z,1510150191.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:52.064Z,1510150192.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:52.080Z,1510150192.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:52.194Z,1510150192.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:52.228Z,1510150192.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:52.614Z,1510150192.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:52.638Z,1510150192.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:53.022Z,1510150193.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:53.037Z,1510150193.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:53.422Z,1510150193.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:53.483Z,1510150193.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:53.804Z,1510150193.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:53.831Z,1510150193.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:54.233Z,1510150194.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:54.249Z,1510150194.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:54.623Z,1510150194.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:54.639Z,1510150194.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:55.286Z,1510150195.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:55.302Z,1510150195.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:55.436Z,1510150195.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:55.452Z,1510150195.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:55.842Z,1510150195.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:55.858Z,1510150195.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:56.250Z,1510150196.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:56.282Z,1510150196.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:56.646Z,1510150196.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:56.679Z,1510150196.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:57.035Z,1510150197.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:57.052Z,1510150197.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:57.432Z,1510150197.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:57.452Z,1510150197.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:57.835Z,1510150197.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:57.852Z,1510150197.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:58.258Z,1510150198.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:58.283Z,1510150198.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:58.635Z,1510150198.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:58.651Z,1510150198.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:59.042Z,1510150199.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:59.058Z,1510150199.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:59.724Z,1510150199.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:59.740Z,1510150199.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:09:59.853Z,1510150199.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:09:59.898Z,1510150199.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:00.281Z,1510150200.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:00.298Z,1510150200.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:00.674Z,1510150200.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:00.697Z,1510150200.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:01.072Z,1510150201.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:01.089Z,1510150201.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:01.460Z,1510150201.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:01.487Z,1510150201.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:01.859Z,1510150201.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:01.892Z,1510150201.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:02.284Z,1510150202.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:02.301Z,1510150202.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:02.680Z,1510150202.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:02.700Z,1510150202.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:03.350Z,1510150203.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:03.383Z,1510150203.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:03.499Z,1510150203.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:03.537Z,1510150203.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:03.914Z,1510150203.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:03.947Z,1510150203.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:04.310Z,1510150204.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:04.338Z,1510150204.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:04.710Z,1510150204.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:04.743Z,1510150204.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:05.100Z,1510150205.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:05.134Z,1510150205.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:05.499Z,1510150205.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:05.575Z,1510150205.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:05.900Z,1510150205.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:05.917Z,1510150205.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:06.330Z,1510150206.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:06.391Z,1510150206.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:06.703Z,1510150206.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:06.720Z,1510150206.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:07.109Z,1510150207.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:07.163Z,1510150207.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:07.795Z,1510150207.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:07.811Z,1510150207.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:07.909Z,1510150207.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:07.956Z,1510150207.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:08.326Z,1510150208.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:08.359Z,1510150208.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:08.725Z,1510150208.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:08.755Z,1510150208.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:09.126Z,1510150209.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:09.158Z,1510150209.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:09.511Z,1510150209.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:09.527Z,1510150209.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:09.916Z,1510150209.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:09.932Z,1510150209.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:10.338Z,1510150210.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:10.361Z,1510150210.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:10.730Z,1510150210.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:10.763Z,1510150210.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:11.399Z,1510150211.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:11.415Z,1510150211.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:11.513Z,1510150211.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:11.563Z,1510150211.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:11.930Z,1510150211.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:11.962Z,1510150211.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:12.329Z,1510150212.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:12.355Z,1510150212.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:12.726Z,1510150212.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:12.750Z,1510150212.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:13.119Z,1510150213.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:13.153Z,1510150213.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:13.519Z,1510150213.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:13.556Z,1510150213.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:13.920Z,1510150213.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:13.952Z,1510150213.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:14.347Z,1510150214.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:14.363Z,1510150214.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:14.715Z,1510150214.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:14.731Z,1510150214.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:15.130Z,1510150215.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:15.162Z,1510150215.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:15.806Z,1510150215.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:15.860Z,1510150215.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:16.002Z,1510150216.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:16.036Z,1510150216.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:16.406Z,1510150216.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:16.424Z,1510150216.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:16.806Z,1510150216.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:16.823Z,1510150216.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:17.207Z,1510150217.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:17.224Z,1510150217.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:17.595Z,1510150217.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:17.625Z,1510150217.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:17.994Z,1510150217.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:18.010Z,1510150218.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:18.417Z,1510150218.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:18.434Z,1510150218.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:18.797Z,1510150218.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:18.813Z,1510150218.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:19.207Z,1510150219.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:19.227Z,1510150219.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:19.874Z,1510150219.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:19.902Z,1510150219.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:20.011Z,1510150220.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:20.052Z,1510150220.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:20.418Z,1510150220.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:20.452Z,1510150220.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:20.821Z,1510150220.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:20.879Z,1510150220.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:21.222Z,1510150221.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:21.238Z,1510150221.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:21.608Z,1510150221.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:21.627Z,1510150221.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:22.010Z,1510150222.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:22.027Z,1510150222.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:22.434Z,1510150222.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:22.458Z,1510150222.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:22.808Z,1510150222.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:22.824Z,1510150222.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:23.207Z,1510150223.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:23.230Z,1510150223.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:23.611Z,1510150223.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:23.633Z,1510150223.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:24.009Z,1510150224.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:24.025Z,1510150224.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:24.414Z,1510150224.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:24.431Z,1510150224.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:24.811Z,1510150224.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:24.832Z,1510150224.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:25.210Z,1510150225.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:25.227Z,1510150225.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:25.614Z,1510150225.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:25.631Z,1510150225.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:26.013Z,1510150226.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:26.030Z,1510150226.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:26.413Z,1510150226.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:26.435Z,1510150226.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:26.814Z,1510150226.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:26.831Z,1510150226.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:27.213Z,1510150227.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:27.229Z,1510150227.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:27.622Z,1510150227.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:27.639Z,1510150227.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:28.305Z,1510150228.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:28.347Z,1510150228.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:28.485Z,1510150228.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:28.501Z,1510150228.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:28.890Z,1510150228.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:28.927Z,1510150228.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:29.289Z,1510150229.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:29.343Z,1510150229.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:29.696Z,1510150229.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:29.725Z,1510150229.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:30.084Z,1510150230.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:30.136Z,1510150230.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:30.478Z,1510150230.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:30.525Z,1510150230.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:30.879Z,1510150230.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:30.903Z,1510150230.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:31.295Z,1510150231.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:31.322Z,1510150231.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:31.680Z,1510150231.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:31.698Z,1510150231.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:32.078Z,1510150232.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:32.123Z,1510150232.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:32.475Z,1510150232.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:32.497Z,1510150232.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:32.878Z,1510150232.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:32.898Z,1510150232.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:33.280Z,1510150233.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:33.298Z,1510150233.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:33.678Z,1510150233.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:33.726Z,1510150233.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:34.078Z,1510150234.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:34.095Z,1510150234.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:34.478Z,1510150234.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:34.498Z,1510150234.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:34.879Z,1510150234.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:34.897Z,1510150234.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:35.278Z,1510150235.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:35.324Z,1510150235.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:35.678Z,1510150235.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:35.695Z,1510150235.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:36.075Z,1510150236.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:36.095Z,1510150236.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:36.480Z,1510150236.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:36.498Z,1510150236.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:36.878Z,1510150236.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:36.923Z,1510150236.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:37.278Z,1510150237.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:37.293Z,1510150237.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:37.691Z,1510150237.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:37.729Z,1510150237.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:38.371Z,1510150238.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:38.426Z,1510150238.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:38.540Z,1510150238.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:38.565Z,1510150238.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:38.973Z,1510150238.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:38.989Z,1510150238.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:39.362Z,1510150239.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:39.391Z,1510150239.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:39.761Z,1510150239.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:39.804Z,1510150239.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:40.154Z,1510150240.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:40.171Z,1510150240.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:40.550Z,1510150240.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:40.567Z,1510150240.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:40.950Z,1510150240.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:40.967Z,1510150240.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:41.378Z,1510150241.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:41.408Z,1510150241.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:41.766Z,1510150241.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:41.801Z,1510150241.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:42.432Z,1510150242.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:42.449Z,1510150242.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:42.567Z,1510150242.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:42.601Z,1510150242.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:42.978Z,1510150242.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:43.004Z,1510150243.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:43.382Z,1510150243.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:43.407Z,1510150243.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:43.782Z,1510150243.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:43.816Z,1510150243.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:44.163Z,1510150244.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:44.180Z,1510150244.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:44.566Z,1510150244.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:44.583Z,1510150244.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:44.969Z,1510150244.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:45.001Z,1510150245.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:45.394Z,1510150245.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:45.418Z,1510150245.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:45.770Z,1510150245.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:45.787Z,1510150245.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:46.182Z,1510150246.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:46.214Z,1510150246.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:46.860Z,1510150246.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:46.876Z,1510150246.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:46.986Z,1510150246.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:47.018Z,1510150247.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:47.416Z,1510150247.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:47.433Z,1510150247.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:47.815Z,1510150247.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:47.832Z,1510150247.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:48.201Z,1510150248.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:48.234Z,1510150248.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:48.596Z,1510150248.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:48.628Z,1510150248.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:48.992Z,1510150248.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:49.031Z,1510150249.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:49.424Z,1510150249.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:49.483Z,1510150249.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:49.809Z,1510150249.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:49.843Z,1510150249.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:50.481Z,1510150250.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:50.550Z,1510150250.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:50.657Z,1510150250.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:50.695Z,1510150250.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:51.084Z,1510150251.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:51.100Z,1510150251.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:51.482Z,1510150251.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:51.539Z,1510150251.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:51.879Z,1510150251.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:51.895Z,1510150251.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:52.267Z,1510150252.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:52.322Z,1510150252.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:52.669Z,1510150252.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:52.685Z,1510150252.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:53.069Z,1510150253.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:53.086Z,1510150253.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:53.494Z,1510150253.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:53.510Z,1510150253.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:53.883Z,1510150253.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:53.902Z,1510150253.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:54.546Z,1510150254.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:54.578Z,1510150254.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:54.695Z,1510150254.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:54.739Z,1510150254.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:55.106Z,1510150255.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:55.138Z,1510150255.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:55.505Z,1510150255.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:55.533Z,1510150255.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:55.909Z,1510150255.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:55.943Z,1510150255.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:56.291Z,1510150256.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:56.311Z,1510150256.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:56.695Z,1510150256.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:56.711Z,1510150256.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:57.096Z,1510150257.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:57.136Z,1510150257.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:57.517Z,1510150257.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:57.541Z,1510150257.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:57.913Z,1510150257.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:57.940Z,1510150257.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:58.587Z,1510150258.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:58.602Z,1510150258.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:58.701Z,1510150258.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:58.751Z,1510150258.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:59.118Z,1510150259.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:59.150Z,1510150259.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:59.529Z,1510150259.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:59.545Z,1510150259.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:10:59.914Z,1510150259.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:10:59.947Z,1510150259.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:00.307Z,1510150260.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:00.355Z,1510150260.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:00.707Z,1510150260.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:00.742Z,1510150260.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:01.108Z,1510150261.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:01.124Z,1510150261.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:01.536Z,1510150261.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:01.552Z,1510150261.552 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:01.553Z,1510150261.553 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2017-11-08T14:11:01.553Z,1510150261.553 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T14:11:01.554Z,1510150261.554 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:01.555Z,1510150261.555 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2017-11-08T14:11:01.555Z,1510150261.555 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T14:11:01.556Z,1510150261.556 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:01.557Z,1510150261.557 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2017-11-08T14:11:01.557Z,1510150261.557 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T14:11:01.629Z,1510150261.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T14:11:01.629Z,1510150261.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T14:11:01.629Z,1510150261.629 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T14:11:01.921Z,1510150261.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:02.036Z,1510150262.036 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T14:11:02.036Z,1510150262.036 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2017-11-08T14:11:02.037Z,1510150262.037 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T14:11:02.037Z,1510150262.037 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2017-11-08T14:11:02.037Z,1510150262.037 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T14:11:02.038Z,1510150262.038 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2017-11-08T14:11:02.597Z,1510150262.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:02.612Z,1510150262.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T14:11:02.613Z,1510150262.613 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:11:02.613Z,1510150262.613 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:11:02.613Z,1510150262.613 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T14:11:02.614Z,1510150262.614 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:11:02.614Z,1510150262.614 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:11:02.614Z,1510150262.614 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T14:11:02.615Z,1510150262.615 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:11:02.615Z,1510150262.615 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:11:02.722Z,1510150262.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:02.763Z,1510150262.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T14:11:02.764Z,1510150262.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:03.134Z,1510150263.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:03.166Z,1510150263.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T14:11:03.167Z,1510150263.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:03.534Z,1510150263.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:03.563Z,1510150263.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T14:11:03.564Z,1510150263.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:03.930Z,1510150263.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:03.962Z,1510150263.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T14:11:03.962Z,1510150263.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:04.319Z,1510150264.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:04.335Z,1510150264.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T14:11:04.362Z,1510150264.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:04.715Z,1510150264.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:04.735Z,1510150264.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T14:11:04.736Z,1510150264.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:05.120Z,1510150265.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:05.136Z,1510150265.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T14:11:05.137Z,1510150265.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:05.546Z,1510150265.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:05.567Z,1510150265.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T14:11:05.568Z,1510150265.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:05.929Z,1510150265.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:05.965Z,1510150265.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T14:11:05.966Z,1510150265.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:06.613Z,1510150266.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:06.629Z,1510150266.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2017-11-08T14:11:06.630Z,1510150266.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:06.762Z,1510150266.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:06.807Z,1510150266.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-08T14:11:06.808Z,1510150266.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:07.170Z,1510150267.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:07.186Z,1510150267.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T14:11:07.187Z,1510150267.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:07.569Z,1510150267.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:07.585Z,1510150267.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T14:11:07.586Z,1510150267.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:07.976Z,1510150267.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:07.992Z,1510150267.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T14:11:07.993Z,1510150267.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:08.356Z,1510150268.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:08.385Z,1510150268.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T14:11:08.386Z,1510150268.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:08.756Z,1510150268.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:08.791Z,1510150268.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T14:11:08.792Z,1510150268.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:09.188Z,1510150269.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:09.204Z,1510150269.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T14:11:09.205Z,1510150269.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:09.556Z,1510150269.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:09.580Z,1510150269.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T14:11:09.585Z,1510150269.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:09.955Z,1510150269.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:09.991Z,1510150269.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T14:11:09.992Z,1510150269.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:10.370Z,1510150270.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:10.396Z,1510150270.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T14:11:10.397Z,1510150270.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:11.044Z,1510150271.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:11.109Z,1510150271.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T14:11:11.110Z,1510150271.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:11.213Z,1510150271.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:11.247Z,1510150271.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T14:11:11.248Z,1510150271.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:11.639Z,1510150271.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:11.659Z,1510150271.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T14:11:11.660Z,1510150271.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:12.036Z,1510150272.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:12.059Z,1510150272.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T14:11:12.060Z,1510150272.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:12.436Z,1510150272.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:12.501Z,1510150272.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T14:11:12.502Z,1510150272.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:12.820Z,1510150272.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:12.852Z,1510150272.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T14:11:12.857Z,1510150272.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:13.220Z,1510150273.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:13.271Z,1510150273.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T14:11:13.272Z,1510150273.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:13.615Z,1510150273.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:13.631Z,1510150273.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T14:11:13.632Z,1510150273.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:14.020Z,1510150274.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:14.071Z,1510150274.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T14:11:14.072Z,1510150274.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:14.451Z,1510150274.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:14.467Z,1510150274.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T14:11:14.468Z,1510150274.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:14.829Z,1510150274.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:14.862Z,1510150274.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T14:11:14.863Z,1510150274.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:15.509Z,1510150275.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:15.525Z,1510150275.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T14:11:15.526Z,1510150275.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:15.633Z,1510150275.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:15.678Z,1510150275.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T14:11:15.679Z,1510150275.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:16.055Z,1510150276.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:16.071Z,1510150276.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T14:11:16.072Z,1510150276.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:16.459Z,1510150276.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:16.483Z,1510150276.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T14:11:16.484Z,1510150276.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:16.850Z,1510150276.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:16.870Z,1510150276.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T14:11:16.870Z,1510150276.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:17.243Z,1510150277.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:17.267Z,1510150277.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T14:11:17.268Z,1510150277.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:17.639Z,1510150277.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:17.670Z,1510150277.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T14:11:17.671Z,1510150277.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:18.040Z,1510150278.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:18.065Z,1510150278.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T14:11:18.066Z,1510150278.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:18.462Z,1510150278.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:18.483Z,1510150278.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T14:11:18.484Z,1510150278.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:18.839Z,1510150278.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:18.872Z,1510150278.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T14:11:18.877Z,1510150278.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:19.257Z,1510150279.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:19.272Z,1510150279.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T14:11:19.273Z,1510150279.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:19.929Z,1510150279.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:19.945Z,1510150279.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T14:11:19.946Z,1510150279.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:20.055Z,1510150280.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:20.087Z,1510150280.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T14:11:20.088Z,1510150280.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:20.472Z,1510150280.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:20.487Z,1510150280.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T14:11:20.489Z,1510150280.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:20.861Z,1510150280.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:20.897Z,1510150280.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T14:11:20.898Z,1510150280.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:21.272Z,1510150281.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:21.292Z,1510150281.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-08T14:11:21.293Z,1510150281.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:21.651Z,1510150281.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:21.685Z,1510150281.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:22.052Z,1510150282.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:22.100Z,1510150282.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:22.484Z,1510150282.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:22.504Z,1510150282.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:22.872Z,1510150282.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:22.907Z,1510150282.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:23.531Z,1510150283.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:23.538Z,1510150283.538 [PNI_TCM](ERROR): CRC does not match. Expected:0x30745 got:0x59165
2017-11-08T14:11:23.586Z,1510150283.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:23.705Z,1510150283.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:23.742Z,1510150283.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:24.118Z,1510150284.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:24.150Z,1510150284.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:24.517Z,1510150284.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:24.541Z,1510150284.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:24.919Z,1510150284.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:24.952Z,1510150284.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:25.305Z,1510150285.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:25.321Z,1510150285.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:25.704Z,1510150285.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:25.720Z,1510150285.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:26.108Z,1510150286.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:26.124Z,1510150286.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:26.534Z,1510150286.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:26.551Z,1510150286.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:26.908Z,1510150286.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:26.924Z,1510150286.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:27.321Z,1510150287.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:27.348Z,1510150287.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:27.997Z,1510150287.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:28.012Z,1510150288.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:28.115Z,1510150288.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:28.139Z,1510150288.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:28.544Z,1510150288.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:28.561Z,1510150288.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:28.942Z,1510150288.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:28.963Z,1510150288.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:29.329Z,1510150289.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:29.356Z,1510150289.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:29.722Z,1510150289.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:29.758Z,1510150289.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:30.122Z,1510150290.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:30.151Z,1510150290.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:30.551Z,1510150290.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:30.568Z,1510150290.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:30.933Z,1510150290.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:30.962Z,1510150290.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:31.611Z,1510150291.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:31.631Z,1510150291.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:31.766Z,1510150291.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:31.783Z,1510150291.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:32.174Z,1510150292.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:32.207Z,1510150292.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:32.574Z,1510150292.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:32.591Z,1510150292.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:32.970Z,1510150292.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:33.035Z,1510150293.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:33.366Z,1510150293.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:33.383Z,1510150293.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:33.765Z,1510150293.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:33.842Z,1510150293.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:34.182Z,1510150294.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:34.199Z,1510150294.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:34.563Z,1510150294.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:34.594Z,1510150294.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:34.965Z,1510150294.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:35.027Z,1510150295.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:35.374Z,1510150295.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:35.395Z,1510150295.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:36.054Z,1510150296.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:36.093Z,1510150296.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:36.229Z,1510150296.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:36.246Z,1510150296.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:36.646Z,1510150296.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:36.676Z,1510150296.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:37.049Z,1510150297.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:37.079Z,1510150297.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:37.446Z,1510150297.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:37.476Z,1510150297.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:37.835Z,1510150297.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:37.872Z,1510150297.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:38.235Z,1510150298.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:38.252Z,1510150298.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:38.635Z,1510150298.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:38.656Z,1510150298.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:39.038Z,1510150299.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:39.055Z,1510150299.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:39.463Z,1510150299.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:39.479Z,1510150299.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:39.845Z,1510150299.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:39.881Z,1510150299.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:40.524Z,1510150300.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:40.544Z,1510150300.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:40.656Z,1510150300.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:40.703Z,1510150300.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:41.075Z,1510150301.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:41.095Z,1510150301.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:41.471Z,1510150301.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:41.491Z,1510150301.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:41.876Z,1510150301.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:41.892Z,1510150301.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:42.255Z,1510150302.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:42.290Z,1510150302.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:42.651Z,1510150302.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:42.676Z,1510150302.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:43.065Z,1510150303.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:43.081Z,1510150303.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:43.482Z,1510150303.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:43.498Z,1510150303.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:43.851Z,1510150303.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:43.879Z,1510150303.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:44.276Z,1510150304.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:44.332Z,1510150304.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:44.947Z,1510150304.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:44.976Z,1510150304.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:45.089Z,1510150305.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:45.139Z,1510150305.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:45.517Z,1510150305.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:45.533Z,1510150305.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:45.916Z,1510150305.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:45.933Z,1510150305.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:46.300Z,1510150306.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:46.337Z,1510150306.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:46.696Z,1510150306.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:46.712Z,1510150306.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:47.096Z,1510150307.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:47.112Z,1510150307.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:47.524Z,1510150307.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:47.540Z,1510150307.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:47.909Z,1510150307.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:47.937Z,1510150307.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:48.584Z,1510150308.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:48.600Z,1510150308.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:48.709Z,1510150308.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:48.743Z,1510150308.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:49.136Z,1510150309.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:49.152Z,1510150309.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:49.531Z,1510150309.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:49.548Z,1510150309.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:49.927Z,1510150309.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:49.943Z,1510150309.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:50.315Z,1510150310.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:50.351Z,1510150310.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:50.715Z,1510150310.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:50.750Z,1510150310.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:51.116Z,1510150311.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:51.146Z,1510150311.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:51.542Z,1510150311.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:51.558Z,1510150311.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:51.915Z,1510150311.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:51.951Z,1510150311.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:52.335Z,1510150312.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:52.352Z,1510150312.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:53.006Z,1510150313.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:53.037Z,1510150313.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:53.151Z,1510150313.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:53.187Z,1510150313.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:53.562Z,1510150313.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:53.594Z,1510150313.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:53.972Z,1510150313.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:53.989Z,1510150313.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:54.362Z,1510150314.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:54.396Z,1510150314.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:54.752Z,1510150314.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:54.788Z,1510150314.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:55.185Z,1510150315.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:55.251Z,1510150315.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:55.566Z,1510150315.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:55.592Z,1510150315.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:56.242Z,1510150316.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:56.259Z,1510150316.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:56.364Z,1510150316.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:56.439Z,1510150316.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:56.783Z,1510150316.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:56.799Z,1510150316.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:57.181Z,1510150317.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:57.204Z,1510150317.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:57.585Z,1510150317.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:57.641Z,1510150317.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:57.960Z,1510150317.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:57.993Z,1510150317.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:58.364Z,1510150318.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:58.415Z,1510150318.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:58.766Z,1510150318.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:58.799Z,1510150318.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:59.195Z,1510150319.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:59.219Z,1510150319.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:59.560Z,1510150319.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:11:59.597Z,1510150319.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:11:59.987Z,1510150319.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:00.007Z,1510150320.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:00.658Z,1510150320.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:00.698Z,1510150320.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:00.809Z,1510150320.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:00.854Z,1510150320.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:01.235Z,1510150321.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:01.255Z,1510150321.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:01.632Z,1510150321.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:01.648Z,1510150321.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:02.021Z,1510150322.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:02.050Z,1510150322.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:02.416Z,1510150322.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:02.440Z,1510150322.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:02.820Z,1510150322.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:02.852Z,1510150322.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:03.248Z,1510150323.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:03.264Z,1510150323.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:03.629Z,1510150323.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:03.664Z,1510150323.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:04.391Z,1510150324.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:04.407Z,1510150324.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:04.521Z,1510150324.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:04.545Z,1510150324.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:04.948Z,1510150324.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:04.972Z,1510150324.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:05.351Z,1510150325.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:05.367Z,1510150325.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:05.737Z,1510150325.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:05.764Z,1510150325.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:06.127Z,1510150326.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:06.159Z,1510150326.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:06.531Z,1510150326.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:06.573Z,1510150326.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:06.932Z,1510150326.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:06.964Z,1510150326.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:07.359Z,1510150327.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:07.376Z,1510150327.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:07.741Z,1510150327.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:07.771Z,1510150327.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:08.412Z,1510150328.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:08.435Z,1510150328.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:08.539Z,1510150328.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:08.575Z,1510150328.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:08.956Z,1510150328.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:08.973Z,1510150328.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:09.357Z,1510150329.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:09.373Z,1510150329.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:09.760Z,1510150329.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:09.777Z,1510150329.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:10.139Z,1510150330.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:10.174Z,1510150330.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:10.539Z,1510150330.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:10.571Z,1510150330.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:10.940Z,1510150330.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:10.971Z,1510150330.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:11.371Z,1510150331.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:11.387Z,1510150331.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:11.758Z,1510150331.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:11.774Z,1510150331.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:12.434Z,1510150332.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:12.467Z,1510150332.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:12.583Z,1510150332.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:12.615Z,1510150332.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:13.009Z,1510150333.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:13.025Z,1510150333.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:13.409Z,1510150333.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:13.425Z,1510150333.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:13.794Z,1510150333.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:13.820Z,1510150333.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:14.188Z,1510150334.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:14.225Z,1510150334.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:14.588Z,1510150334.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:14.620Z,1510150334.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:14.984Z,1510150334.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:15.001Z,1510150335.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:15.420Z,1510150335.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:15.443Z,1510150335.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:15.784Z,1510150335.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:15.824Z,1510150335.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:16.201Z,1510150336.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:16.227Z,1510150336.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:16.869Z,1510150336.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:16.888Z,1510150336.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:17.003Z,1510150337.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:17.034Z,1510150337.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:17.421Z,1510150337.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:17.492Z,1510150337.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:17.821Z,1510150337.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:17.836Z,1510150337.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:18.218Z,1510150338.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:18.248Z,1510150338.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:18.604Z,1510150338.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:18.669Z,1510150338.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:19.004Z,1510150339.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:19.034Z,1510150339.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:19.435Z,1510150339.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:19.483Z,1510150339.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:19.822Z,1510150339.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:19.844Z,1510150339.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:20.479Z,1510150340.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:20.535Z,1510150340.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:20.647Z,1510150340.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:20.687Z,1510150340.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:21.058Z,1510150341.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:21.087Z,1510150341.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:21.457Z,1510150341.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:21.487Z,1510150341.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:21.868Z,1510150341.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:21.884Z,1510150341.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:22.244Z,1510150342.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:22.260Z,1510150342.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:22.647Z,1510150342.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:22.663Z,1510150342.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:23.049Z,1510150343.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:23.081Z,1510150343.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:23.476Z,1510150343.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:23.493Z,1510150343.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:23.852Z,1510150343.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:23.868Z,1510150343.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:24.263Z,1510150344.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:24.291Z,1510150344.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:24.943Z,1510150344.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:24.959Z,1510150344.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:25.092Z,1510150345.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:25.134Z,1510150345.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:25.506Z,1510150345.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:25.538Z,1510150345.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:25.901Z,1510150345.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:25.917Z,1510150345.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:26.297Z,1510150346.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:26.319Z,1510150346.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:26.693Z,1510150346.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:26.710Z,1510150346.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:27.093Z,1510150347.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:27.120Z,1510150347.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:27.513Z,1510150347.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:27.542Z,1510150347.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:27.903Z,1510150347.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:27.923Z,1510150347.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:28.566Z,1510150348.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:28.613Z,1510150348.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:28.715Z,1510150348.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:28.756Z,1510150348.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:29.137Z,1510150349.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:29.153Z,1510150349.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:29.536Z,1510150349.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:29.559Z,1510150349.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:29.937Z,1510150349.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:29.954Z,1510150349.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:30.315Z,1510150350.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:30.354Z,1510150350.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:30.715Z,1510150350.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:30.739Z,1510150350.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:31.112Z,1510150351.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:31.129Z,1510150351.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:31.549Z,1510150351.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:31.565Z,1510150351.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:31.915Z,1510150351.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:31.930Z,1510150351.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:32.325Z,1510150352.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:32.354Z,1510150352.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:33.014Z,1510150353.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:33.035Z,1510150353.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:33.168Z,1510150353.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:33.215Z,1510150353.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:33.581Z,1510150353.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:33.604Z,1510150353.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:33.982Z,1510150353.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:34.007Z,1510150354.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:34.381Z,1510150354.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:34.407Z,1510150354.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:34.768Z,1510150354.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:34.787Z,1510150354.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:35.198Z,1510150355.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:35.215Z,1510150355.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:35.586Z,1510150355.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:35.616Z,1510150355.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:36.260Z,1510150356.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:36.277Z,1510150356.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:36.388Z,1510150356.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:36.435Z,1510150356.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:36.805Z,1510150356.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:36.822Z,1510150356.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:37.210Z,1510150357.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:37.231Z,1510150357.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:37.608Z,1510150357.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:37.624Z,1510150357.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:37.987Z,1510150357.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:38.022Z,1510150358.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:38.387Z,1510150358.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:38.413Z,1510150358.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:38.788Z,1510150358.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:38.815Z,1510150358.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:39.211Z,1510150359.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:39.232Z,1510150359.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:39.587Z,1510150359.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:39.639Z,1510150359.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:40.007Z,1510150360.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:40.025Z,1510150360.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:40.677Z,1510150360.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:40.735Z,1510150360.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:40.842Z,1510150360.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:40.875Z,1510150360.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:41.267Z,1510150361.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:41.288Z,1510150361.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:41.667Z,1510150361.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:41.719Z,1510150361.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:42.068Z,1510150362.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:42.085Z,1510150362.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:42.448Z,1510150362.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:42.506Z,1510150362.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:42.857Z,1510150362.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:42.873Z,1510150362.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:43.274Z,1510150363.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:43.290Z,1510150363.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:43.669Z,1510150363.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:43.685Z,1510150363.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:44.370Z,1510150364.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:44.385Z,1510150364.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:44.484Z,1510150364.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:44.513Z,1510150364.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:44.915Z,1510150364.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:44.932Z,1510150364.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:45.309Z,1510150365.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:45.325Z,1510150365.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:45.699Z,1510150365.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:45.734Z,1510150365.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:46.090Z,1510150366.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:46.120Z,1510150366.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:46.488Z,1510150366.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:46.528Z,1510150366.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:46.888Z,1510150366.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:46.929Z,1510150366.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:47.013Z,1510150367.013 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T14:12:47.320Z,1510150367.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:47.336Z,1510150367.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:47.689Z,1510150367.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:47.705Z,1510150367.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:48.097Z,1510150368.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:48.129Z,1510150368.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:48.783Z,1510150368.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:48.789Z,1510150368.789 [PNI_TCM](ERROR): CRC does not match. Expected:0x47135 got:0x6336
2017-11-08T14:12:48.833Z,1510150368.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:48.951Z,1510150368.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:48.987Z,1510150368.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:49.372Z,1510150369.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:49.388Z,1510150369.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:49.772Z,1510150369.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:49.789Z,1510150369.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:50.168Z,1510150370.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:50.185Z,1510150370.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:50.555Z,1510150370.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:50.609Z,1510150370.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:50.953Z,1510150370.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:50.983Z,1510150370.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:51.380Z,1510150371.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:51.396Z,1510150371.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:51.774Z,1510150371.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:51.795Z,1510150371.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:52.442Z,1510150372.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:52.458Z,1510150372.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:52.597Z,1510150372.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:52.621Z,1510150372.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:53.013Z,1510150373.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:53.041Z,1510150373.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:53.413Z,1510150373.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:53.439Z,1510150373.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:53.809Z,1510150373.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:53.842Z,1510150373.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:54.203Z,1510150374.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:54.219Z,1510150374.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:54.603Z,1510150374.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:54.624Z,1510150374.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:55.008Z,1510150375.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:55.024Z,1510150375.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:55.435Z,1510150375.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:55.455Z,1510150375.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:55.803Z,1510150375.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:55.824Z,1510150375.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:56.213Z,1510150376.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:56.260Z,1510150376.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:56.882Z,1510150376.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:56.908Z,1510150376.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:57.016Z,1510150377.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:57.060Z,1510150377.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:57.440Z,1510150377.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:57.457Z,1510150377.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:57.829Z,1510150377.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:57.855Z,1510150377.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:58.240Z,1510150378.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:58.257Z,1510150378.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:58.620Z,1510150378.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:58.652Z,1510150378.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:59.015Z,1510150379.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:59.061Z,1510150379.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:59.452Z,1510150379.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:59.469Z,1510150379.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:12:59.834Z,1510150379.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:12:59.867Z,1510150379.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:00.499Z,1510150380.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:00.516Z,1510150380.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:00.623Z,1510150380.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:00.664Z,1510150380.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:01.034Z,1510150381.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:01.067Z,1510150381.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:01.433Z,1510150381.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:01.464Z,1510150381.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:01.844Z,1510150381.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:01.861Z,1510150381.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:02.223Z,1510150382.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:02.231Z,1510150382.231 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T14:13:02.231Z,1510150382.231 [BPC1] Data Fault, FailCount= 1
2017-11-08T14:13:02.231Z,1510150382.231 [BPC1](ERROR): Data Fault
2017-11-08T14:13:02.269Z,1510150382.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:02.349Z,1510150382.349 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T14:13:02.619Z,1510150382.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:02.635Z,1510150382.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:03.024Z,1510150383.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:03.062Z,1510150383.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:03.451Z,1510150383.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:03.468Z,1510150383.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:03.545Z,1510150383.545 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T14:13:03.545Z,1510150383.545 [BPC1] No Fault, FailCount= 1
2017-11-08T14:13:03.823Z,1510150383.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:03.898Z,1510150383.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:04.237Z,1510150384.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:04.264Z,1510150384.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:04.910Z,1510150384.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:04.926Z,1510150384.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:05.033Z,1510150385.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:05.067Z,1510150385.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:05.460Z,1510150385.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:05.476Z,1510150385.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:05.859Z,1510150385.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:05.875Z,1510150385.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:06.256Z,1510150386.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:06.272Z,1510150386.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:06.639Z,1510150386.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:06.682Z,1510150386.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:07.040Z,1510150387.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:07.064Z,1510150387.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:07.464Z,1510150387.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:07.481Z,1510150387.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:07.860Z,1510150387.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:07.876Z,1510150387.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:08.517Z,1510150388.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:08.533Z,1510150388.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:08.673Z,1510150388.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:08.715Z,1510150388.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:09.099Z,1510150389.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:09.119Z,1510150389.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:09.496Z,1510150389.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:09.511Z,1510150389.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:09.897Z,1510150389.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:09.913Z,1510150389.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:10.280Z,1510150390.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:10.310Z,1510150390.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:10.679Z,1510150390.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:10.709Z,1510150390.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:11.076Z,1510150391.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:11.100Z,1510150391.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:11.511Z,1510150391.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:11.527Z,1510150391.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:11.875Z,1510150391.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:11.915Z,1510150391.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:12.303Z,1510150392.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:12.359Z,1510150392.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:12.974Z,1510150392.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:13.014Z,1510150393.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:13.127Z,1510150393.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:13.165Z,1510150393.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:13.533Z,1510150393.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:13.557Z,1510150393.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:13.933Z,1510150393.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:13.959Z,1510150393.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:14.329Z,1510150394.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:14.360Z,1510150394.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:14.721Z,1510150394.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:14.763Z,1510150394.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:15.123Z,1510150395.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:15.159Z,1510150395.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:15.552Z,1510150395.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:15.569Z,1510150395.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:15.937Z,1510150395.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:15.967Z,1510150395.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:16.618Z,1510150396.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:16.640Z,1510150396.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:16.774Z,1510150396.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:16.815Z,1510150396.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:17.185Z,1510150397.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:17.209Z,1510150397.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:17.582Z,1510150397.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:17.614Z,1510150397.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:17.985Z,1510150397.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:18.012Z,1510150398.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:18.371Z,1510150398.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:18.401Z,1510150398.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:18.776Z,1510150398.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:18.793Z,1510150398.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:19.193Z,1510150399.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:19.226Z,1510150399.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:19.575Z,1510150399.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:19.595Z,1510150399.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:19.974Z,1510150399.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:19.991Z,1510150399.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:20.381Z,1510150400.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:20.397Z,1510150400.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:21.060Z,1510150401.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:21.084Z,1510150401.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:21.191Z,1510150401.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:21.231Z,1510150401.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:21.602Z,1510150401.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:21.632Z,1510150401.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:22.012Z,1510150402.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:22.035Z,1510150402.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:22.402Z,1510150402.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:22.434Z,1510150402.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:22.791Z,1510150402.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:22.826Z,1510150402.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:23.231Z,1510150403.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:23.273Z,1510150403.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:23.612Z,1510150403.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:23.629Z,1510150403.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:25.526Z,1510150405.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:25.625Z,1510150405.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:25.740Z,1510150405.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:25.757Z,1510150405.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:26.150Z,1510150406.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:26.203Z,1510150406.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:26.553Z,1510150406.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:26.585Z,1510150406.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:26.945Z,1510150406.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:26.995Z,1510150406.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:27.343Z,1510150407.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:27.364Z,1510150407.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:27.739Z,1510150407.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:27.759Z,1510150407.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:28.140Z,1510150408.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:28.156Z,1510150408.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:28.562Z,1510150408.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:28.591Z,1510150408.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:28.955Z,1510150408.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:28.976Z,1510150408.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:29.614Z,1510150409.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:29.630Z,1510150409.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:29.764Z,1510150409.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:29.781Z,1510150409.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:30.175Z,1510150410.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:30.207Z,1510150410.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:30.570Z,1510150410.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:30.586Z,1510150410.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:30.970Z,1510150410.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:30.987Z,1510150410.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:31.360Z,1510150411.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:31.377Z,1510150411.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:31.763Z,1510150411.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:31.779Z,1510150411.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:32.182Z,1510150412.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:32.215Z,1510150412.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:32.559Z,1510150412.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:32.577Z,1510150412.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:32.958Z,1510150412.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:32.976Z,1510150412.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:33.053Z,1510150413.053 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:13:33.053Z,1510150413.053 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T14:13:33.137Z,1510150413.137 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:13:33.137Z,1510150413.137 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:13:33.137Z,1510150413.137 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:13:33.137Z,1510150413.137 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T14:13:33.137Z,1510150413.137 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:13:33.366Z,1510150413.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:33.387Z,1510150413.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:33.481Z,1510150413.481 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:13:33.542Z,1510150413.542 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:13:33.628Z,1510150413.628 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:13:34.047Z,1510150414.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:34.065Z,1510150414.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:34.182Z,1510150414.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:34.215Z,1510150414.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:34.606Z,1510150414.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:34.637Z,1510150414.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:35.009Z,1510150415.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:35.063Z,1510150415.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:35.165Z,1510150415.165 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:13:35.165Z,1510150415.165 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T14:13:35.245Z,1510150415.245 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:13:35.245Z,1510150415.245 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:13:35.245Z,1510150415.245 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:13:35.245Z,1510150415.245 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T14:13:35.245Z,1510150415.245 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:13:35.409Z,1510150415.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:35.426Z,1510150415.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:35.506Z,1510150415.506 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:13:35.649Z,1510150415.649 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:13:35.739Z,1510150415.739 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:13:35.793Z,1510150415.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:35.823Z,1510150415.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:36.220Z,1510150416.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:36.244Z,1510150416.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:36.610Z,1510150416.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:36.627Z,1510150416.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:37.280Z,1510150417.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:37.298Z,1510150417.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:37.392Z,1510150417.392 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:13:37.393Z,1510150417.393 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T14:13:37.437Z,1510150417.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:37.476Z,1510150417.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:37.757Z,1510150417.757 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:13:37.757Z,1510150417.757 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:13:37.757Z,1510150417.757 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:13:37.757Z,1510150417.757 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T14:13:37.757Z,1510150417.757 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:13:37.849Z,1510150417.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:37.872Z,1510150417.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:37.956Z,1510150417.956 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:13:38.161Z,1510150418.161 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:13:38.245Z,1510150418.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:38.279Z,1510150418.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:38.353Z,1510150418.353 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:13:38.634Z,1510150418.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:38.651Z,1510150418.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:39.031Z,1510150419.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:39.048Z,1510150419.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:39.427Z,1510150419.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:39.449Z,1510150419.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:39.825Z,1510150419.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:39.842Z,1510150419.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:39.949Z,1510150419.949 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:13:39.949Z,1510150419.949 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T14:13:39.969Z,1510150419.969 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:13:39.969Z,1510150419.969 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:13:39.969Z,1510150419.969 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:13:39.969Z,1510150419.969 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T14:13:39.970Z,1510150419.970 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:13:40.250Z,1510150420.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:40.280Z,1510150420.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:40.373Z,1510150420.373 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:13:40.397Z,1510150420.397 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:13:40.467Z,1510150420.467 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:13:40.631Z,1510150420.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:40.650Z,1510150420.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:41.037Z,1510150421.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:41.054Z,1510150421.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:41.707Z,1510150421.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:41.730Z,1510150421.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:41.816Z,1510150421.816 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:13:41.817Z,1510150421.817 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T14:13:41.847Z,1510150421.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:41.895Z,1510150421.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:42.081Z,1510150422.081 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:13:42.082Z,1510150422.082 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:13:42.082Z,1510150422.082 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:13:42.082Z,1510150422.082 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T14:13:42.082Z,1510150422.082 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:13:42.268Z,1510150422.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:42.286Z,1510150422.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:42.366Z,1510150422.366 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:13:42.366Z,1510150422.366 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:13:42.485Z,1510150422.485 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:13:42.578Z,1510150422.578 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:13:42.669Z,1510150422.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:42.689Z,1510150422.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:43.068Z,1510150423.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:43.086Z,1510150423.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:43.451Z,1510150423.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:43.482Z,1510150423.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:43.848Z,1510150423.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:43.882Z,1510150423.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:44.282Z,1510150424.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:44.305Z,1510150424.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:44.669Z,1510150424.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:44.685Z,1510150424.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:45.331Z,1510150425.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:45.349Z,1510150425.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:45.459Z,1510150425.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:45.508Z,1510150425.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:45.876Z,1510150425.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:45.893Z,1510150425.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:46.283Z,1510150426.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:46.304Z,1510150426.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:46.683Z,1510150426.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:46.704Z,1510150426.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:47.059Z,1510150427.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:47.140Z,1510150427.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:47.459Z,1510150427.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:47.490Z,1510150427.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:47.864Z,1510150427.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:47.930Z,1510150427.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:48.290Z,1510150428.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:48.312Z,1510150428.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:48.659Z,1510150428.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:48.700Z,1510150428.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:49.080Z,1510150429.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:49.104Z,1510150429.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:49.757Z,1510150429.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:49.789Z,1510150429.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:49.901Z,1510150429.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:49.943Z,1510150429.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:50.327Z,1510150430.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:50.343Z,1510150430.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:50.727Z,1510150430.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:50.743Z,1510150430.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:51.125Z,1510150431.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:51.141Z,1510150431.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:51.507Z,1510150431.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:51.538Z,1510150431.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:51.907Z,1510150431.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:51.937Z,1510150431.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:52.336Z,1510150432.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:52.353Z,1510150432.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:52.727Z,1510150432.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:52.744Z,1510150432.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:53.389Z,1510150433.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:53.406Z,1510150433.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:53.543Z,1510150433.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:53.582Z,1510150433.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:53.954Z,1510150433.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:53.986Z,1510150433.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:54.353Z,1510150434.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:54.369Z,1510150434.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:54.753Z,1510150434.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:54.770Z,1510150434.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:55.144Z,1510150435.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:55.160Z,1510150435.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:55.544Z,1510150435.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:55.559Z,1510150435.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:55.946Z,1510150435.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:55.962Z,1510150435.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:56.366Z,1510150436.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:56.387Z,1510150436.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:56.741Z,1510150436.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:56.789Z,1510150436.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:57.153Z,1510150437.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:57.170Z,1510150437.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:57.836Z,1510150437.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:57.853Z,1510150437.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:57.956Z,1510150437.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:57.985Z,1510150437.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:58.368Z,1510150438.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:58.405Z,1510150438.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:58.774Z,1510150438.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:58.808Z,1510150438.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:59.166Z,1510150439.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:59.194Z,1510150439.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:59.559Z,1510150439.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:59.575Z,1510150439.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:13:59.961Z,1510150439.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:13:59.977Z,1510150439.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:00.390Z,1510150440.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:00.406Z,1510150440.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:00.774Z,1510150440.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:00.803Z,1510150440.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:01.454Z,1510150441.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:01.470Z,1510150441.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:01.589Z,1510150441.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:01.627Z,1510150441.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:02.003Z,1510150442.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:02.018Z,1510150442.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:02.406Z,1510150442.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:02.422Z,1510150442.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:02.802Z,1510150442.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:02.819Z,1510150442.819 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:02.819Z,1510150442.819 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2017-11-08T14:14:02.819Z,1510150442.819 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T14:14:02.821Z,1510150442.821 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:02.821Z,1510150442.821 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2017-11-08T14:14:02.821Z,1510150442.821 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T14:14:02.822Z,1510150442.822 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:02.823Z,1510150442.823 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2017-11-08T14:14:02.823Z,1510150442.823 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T14:14:02.897Z,1510150442.897 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T14:14:02.897Z,1510150442.897 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T14:14:02.898Z,1510150442.898 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T14:14:03.187Z,1510150443.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:03.294Z,1510150443.294 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T14:14:03.294Z,1510150443.294 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2017-11-08T14:14:03.295Z,1510150443.295 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T14:14:03.295Z,1510150443.295 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2017-11-08T14:14:03.295Z,1510150443.295 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T14:14:03.295Z,1510150443.295 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2017-11-08T14:14:03.587Z,1510150443.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:03.612Z,1510150443.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T14:14:03.613Z,1510150443.613 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:14:03.613Z,1510150443.613 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:14:03.613Z,1510150443.613 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T14:14:03.614Z,1510150443.614 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:14:03.614Z,1510150443.614 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:14:03.614Z,1510150443.614 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T14:14:03.615Z,1510150443.615 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:14:03.615Z,1510150443.615 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:14:03.987Z,1510150443.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:04.003Z,1510150444.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T14:14:04.004Z,1510150444.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:04.420Z,1510150444.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:04.443Z,1510150444.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T14:14:04.444Z,1510150444.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:04.787Z,1510150444.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:04.807Z,1510150444.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T14:14:04.808Z,1510150444.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:05.205Z,1510150445.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:05.232Z,1510150445.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T14:14:05.233Z,1510150445.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:05.880Z,1510150445.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:05.896Z,1510150445.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.1 s old, using for 20.0 s.
2017-11-08T14:14:05.897Z,1510150445.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:06.015Z,1510150446.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:06.063Z,1510150446.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T14:14:06.064Z,1510150446.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:06.432Z,1510150446.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:06.448Z,1510150446.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T14:14:06.449Z,1510150446.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:06.832Z,1510150446.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:06.847Z,1510150446.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T14:14:06.848Z,1510150446.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:07.236Z,1510150447.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:07.259Z,1510150447.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T14:14:07.260Z,1510150447.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:07.615Z,1510150447.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:07.647Z,1510150447.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T14:14:07.648Z,1510150447.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:08.012Z,1510150448.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:08.047Z,1510150448.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T14:14:08.048Z,1510150448.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:08.442Z,1510150448.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:08.463Z,1510150448.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T14:14:08.464Z,1510150448.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:08.836Z,1510150448.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:08.915Z,1510150448.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-08T14:14:08.916Z,1510150448.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:09.494Z,1510150449.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:09.510Z,1510150449.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2017-11-08T14:14:09.511Z,1510150449.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:09.609Z,1510150449.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:09.674Z,1510150449.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T14:14:09.675Z,1510150449.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:10.026Z,1510150450.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:10.055Z,1510150450.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T14:14:10.056Z,1510150450.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:10.425Z,1510150450.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:10.476Z,1510150450.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T14:14:10.489Z,1510150450.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:10.836Z,1510150450.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:10.852Z,1510150450.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T14:14:10.853Z,1510150450.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:11.219Z,1510150451.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:11.250Z,1510150451.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T14:14:11.251Z,1510150451.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:11.612Z,1510150451.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:11.627Z,1510150451.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T14:14:11.628Z,1510150451.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:12.017Z,1510150452.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:12.049Z,1510150452.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T14:14:12.050Z,1510150452.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:12.448Z,1510150452.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:12.464Z,1510150452.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T14:14:12.465Z,1510150452.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:12.813Z,1510150452.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:12.828Z,1510150452.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T14:14:12.829Z,1510150452.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:13.230Z,1510150453.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:13.263Z,1510150453.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T14:14:13.264Z,1510150453.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:13.910Z,1510150453.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:13.926Z,1510150453.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2017-11-08T14:14:13.926Z,1510150453.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:14.060Z,1510150454.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:14.102Z,1510150454.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T14:14:14.103Z,1510150454.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:14.466Z,1510150454.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:14.482Z,1510150454.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T14:14:14.483Z,1510150454.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:14.861Z,1510150454.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:14.877Z,1510150454.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T14:14:14.878Z,1510150454.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:15.265Z,1510150455.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:15.280Z,1510150455.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T14:14:15.281Z,1510150455.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:15.655Z,1510150455.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:15.679Z,1510150455.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T14:14:15.680Z,1510150455.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:16.055Z,1510150456.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:16.070Z,1510150456.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T14:14:16.071Z,1510150456.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:16.470Z,1510150456.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:16.485Z,1510150456.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T14:14:16.486Z,1510150456.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:16.863Z,1510150456.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:16.884Z,1510150456.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T14:14:16.886Z,1510150456.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:17.533Z,1510150457.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:17.555Z,1510150457.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2017-11-08T14:14:17.556Z,1510150457.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:17.670Z,1510150457.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:17.726Z,1510150457.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T14:14:17.727Z,1510150457.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:18.090Z,1510150458.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:18.117Z,1510150458.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T14:14:18.118Z,1510150458.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:18.492Z,1510150458.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:18.540Z,1510150458.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T14:14:18.541Z,1510150458.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:18.896Z,1510150458.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:18.922Z,1510150458.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T14:14:18.923Z,1510150458.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:19.278Z,1510150459.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:19.314Z,1510150459.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T14:14:19.315Z,1510150459.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:19.675Z,1510150459.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:19.692Z,1510150459.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T14:14:19.693Z,1510150459.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:20.081Z,1510150460.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:20.122Z,1510150460.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T14:14:20.123Z,1510150460.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:20.502Z,1510150460.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:20.526Z,1510150460.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T14:14:20.527Z,1510150460.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:20.878Z,1510150460.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:20.926Z,1510150460.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T14:14:20.927Z,1510150460.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:21.290Z,1510150461.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:21.327Z,1510150461.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T14:14:21.328Z,1510150461.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:22.012Z,1510150462.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:22.028Z,1510150462.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T14:14:22.029Z,1510150462.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:22.137Z,1510150462.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:22.153Z,1510150462.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T14:14:22.154Z,1510150462.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:22.553Z,1510150462.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:22.590Z,1510150462.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-08T14:14:22.591Z,1510150462.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:22.953Z,1510150462.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:22.988Z,1510150462.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:23.353Z,1510150463.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:23.386Z,1510150463.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:23.741Z,1510150463.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:23.786Z,1510150463.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:24.141Z,1510150464.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:24.158Z,1510150464.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:24.574Z,1510150464.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:24.590Z,1510150464.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:24.958Z,1510150464.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:24.991Z,1510150464.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:25.638Z,1510150465.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:25.654Z,1510150465.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:25.790Z,1510150465.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:25.807Z,1510150465.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:26.193Z,1510150466.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:26.209Z,1510150466.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:26.594Z,1510150466.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:26.610Z,1510150466.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:26.990Z,1510150466.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:27.006Z,1510150467.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:27.387Z,1510150467.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:27.403Z,1510150467.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:27.784Z,1510150467.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:27.801Z,1510150467.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:28.205Z,1510150468.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:28.236Z,1510150468.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:28.587Z,1510150468.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:28.604Z,1510150468.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:28.986Z,1510150468.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:29.003Z,1510150469.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:29.394Z,1510150469.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:29.410Z,1510150469.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:30.073Z,1510150470.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:30.092Z,1510150470.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:30.205Z,1510150470.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:30.263Z,1510150470.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:30.610Z,1510150470.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:30.631Z,1510150470.631 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T14:14:30.631Z,1510150470.631 [BPC1] Data Fault, FailCount= 1
2017-11-08T14:14:30.631Z,1510150470.631 [BPC1](ERROR): Data Fault
2017-11-08T14:14:30.640Z,1510150470.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:30.721Z,1510150470.721 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T14:14:31.022Z,1510150471.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:31.047Z,1510150471.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:31.414Z,1510150471.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:31.445Z,1510150471.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:31.804Z,1510150471.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:31.820Z,1510150471.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:31.917Z,1510150471.917 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T14:14:31.917Z,1510150471.917 [BPC1] No Fault, FailCount= 1
2017-11-08T14:14:32.233Z,1510150472.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:32.293Z,1510150472.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:32.614Z,1510150472.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:32.646Z,1510150472.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:33.335Z,1510150473.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:33.356Z,1510150473.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:33.458Z,1510150473.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:33.509Z,1510150473.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:33.882Z,1510150473.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:33.903Z,1510150473.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:34.276Z,1510150474.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:34.301Z,1510150474.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:34.686Z,1510150474.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:34.707Z,1510150474.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:35.064Z,1510150475.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:35.096Z,1510150475.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:35.463Z,1510150475.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:35.504Z,1510150475.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:35.869Z,1510150475.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:35.905Z,1510150475.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:36.296Z,1510150476.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:36.313Z,1510150476.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:36.663Z,1510150476.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:36.680Z,1510150476.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:37.073Z,1510150477.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:37.114Z,1510150477.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:37.758Z,1510150477.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:37.775Z,1510150477.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:37.873Z,1510150477.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:37.922Z,1510150477.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:38.300Z,1510150478.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:38.321Z,1510150478.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:38.718Z,1510150478.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:38.735Z,1510150478.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:39.094Z,1510150479.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:39.264Z,1510150479.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:39.477Z,1510150479.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:39.571Z,1510150479.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:39.877Z,1510150479.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:40.003Z,1510150480.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:40.304Z,1510150480.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:40.368Z,1510150480.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:40.694Z,1510150480.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:40.727Z,1510150480.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:41.375Z,1510150481.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:41.396Z,1510150481.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:41.524Z,1510150481.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:41.571Z,1510150481.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:41.938Z,1510150481.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:41.972Z,1510150481.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:42.342Z,1510150482.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:42.368Z,1510150482.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:42.738Z,1510150482.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:42.771Z,1510150482.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:43.128Z,1510150483.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:43.144Z,1510150483.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:43.521Z,1510150483.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:43.537Z,1510150483.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:43.924Z,1510150483.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:43.961Z,1510150483.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:44.350Z,1510150484.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:44.375Z,1510150484.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:44.724Z,1510150484.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:44.741Z,1510150484.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:45.138Z,1510150485.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:45.154Z,1510150485.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:45.812Z,1510150485.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:45.827Z,1510150485.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:45.941Z,1510150485.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:45.987Z,1510150485.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:46.362Z,1510150486.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:46.386Z,1510150486.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:46.765Z,1510150486.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:46.782Z,1510150486.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:47.164Z,1510150487.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:47.182Z,1510150487.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:47.547Z,1510150487.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:47.579Z,1510150487.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:47.948Z,1510150487.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:47.983Z,1510150487.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:48.376Z,1510150488.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:48.393Z,1510150488.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:48.768Z,1510150488.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:48.785Z,1510150488.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:49.434Z,1510150489.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:49.450Z,1510150489.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:49.559Z,1510150489.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:49.604Z,1510150489.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:49.976Z,1510150489.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:49.993Z,1510150489.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:50.380Z,1510150490.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:50.396Z,1510150490.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:50.776Z,1510150490.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:50.792Z,1510150490.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:51.159Z,1510150491.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:51.194Z,1510150491.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:51.555Z,1510150491.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:51.586Z,1510150491.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:51.959Z,1510150491.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:51.996Z,1510150491.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:52.382Z,1510150492.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:52.467Z,1510150492.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:52.759Z,1510150492.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:52.784Z,1510150492.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:53.179Z,1510150493.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:53.239Z,1510150493.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:53.858Z,1510150493.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:53.879Z,1510150493.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:53.994Z,1510150493.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:54.052Z,1510150494.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:54.414Z,1510150494.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:54.444Z,1510150494.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:54.813Z,1510150494.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:54.837Z,1510150494.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:55.210Z,1510150495.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:55.236Z,1510150495.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:55.603Z,1510150495.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:55.637Z,1510150495.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:56.004Z,1510150496.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:56.037Z,1510150496.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:56.428Z,1510150496.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:56.444Z,1510150496.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:56.813Z,1510150496.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:56.844Z,1510150496.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:57.485Z,1510150497.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:57.501Z,1510150497.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:57.601Z,1510150497.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:57.650Z,1510150497.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:58.028Z,1510150498.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:58.044Z,1510150498.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:58.427Z,1510150498.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:58.447Z,1510150498.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:58.828Z,1510150498.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:58.844Z,1510150498.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:59.208Z,1510150499.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:59.240Z,1510150499.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:14:59.611Z,1510150499.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:14:59.642Z,1510150499.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:00.004Z,1510150500.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:00.020Z,1510150500.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:00.439Z,1510150500.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:00.456Z,1510150500.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:00.811Z,1510150500.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:00.847Z,1510150500.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:01.217Z,1510150501.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:01.256Z,1510150501.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:01.906Z,1510150501.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:01.944Z,1510150501.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:02.063Z,1510150502.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:02.127Z,1510150502.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:02.485Z,1510150502.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:02.501Z,1510150502.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:02.873Z,1510150502.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:02.907Z,1510150502.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:03.273Z,1510150503.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:03.313Z,1510150503.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:03.663Z,1510150503.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:03.699Z,1510150503.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:04.060Z,1510150504.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:04.076Z,1510150504.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:04.481Z,1510150504.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:04.521Z,1510150504.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:04.877Z,1510150504.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:04.919Z,1510150504.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:05.560Z,1510150505.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:05.576Z,1510150505.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:05.676Z,1510150505.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:05.730Z,1510150505.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:06.106Z,1510150506.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:06.126Z,1510150506.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:06.505Z,1510150506.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:06.527Z,1510150506.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:06.895Z,1510150506.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:06.925Z,1510150506.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:07.283Z,1510150507.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:07.321Z,1510150507.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:07.679Z,1510150507.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:07.720Z,1510150507.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:08.085Z,1510150508.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:08.116Z,1510150508.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:08.516Z,1510150508.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:08.531Z,1510150508.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:08.879Z,1510150508.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:08.926Z,1510150508.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:09.299Z,1510150509.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:09.335Z,1510150509.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:09.970Z,1510150509.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:09.986Z,1510150509.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:10.097Z,1510150510.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:10.132Z,1510150510.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:10.514Z,1510150510.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:10.534Z,1510150510.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:10.911Z,1510150510.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:10.943Z,1510150510.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:11.312Z,1510150511.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:11.329Z,1510150511.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:11.697Z,1510150511.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:11.733Z,1510150511.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:12.096Z,1510150512.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:12.135Z,1510150512.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:12.524Z,1510150512.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:12.548Z,1510150512.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:12.915Z,1510150512.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:12.931Z,1510150512.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:13.582Z,1510150513.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:13.598Z,1510150513.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:13.739Z,1510150513.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:13.773Z,1510150513.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:14.156Z,1510150514.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:14.232Z,1510150514.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:14.553Z,1510150514.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:14.579Z,1510150514.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:14.950Z,1510150514.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:14.976Z,1510150514.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:15.339Z,1510150515.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:15.399Z,1510150515.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:15.735Z,1510150515.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:15.751Z,1510150515.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:16.136Z,1510150516.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:16.184Z,1510150516.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:16.566Z,1510150516.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:16.588Z,1510150516.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:16.935Z,1510150516.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:16.951Z,1510150516.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:17.349Z,1510150517.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:17.377Z,1510150517.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:18.034Z,1510150518.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:18.051Z,1510150518.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:18.183Z,1510150518.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:18.199Z,1510150518.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:18.594Z,1510150518.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:18.624Z,1510150518.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:18.993Z,1510150518.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:19.024Z,1510150519.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:19.393Z,1510150519.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:19.425Z,1510150519.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:19.783Z,1510150519.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:19.799Z,1510150519.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:20.211Z,1510150520.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:20.226Z,1510150520.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:20.593Z,1510150520.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:20.625Z,1510150520.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:21.271Z,1510150521.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:21.292Z,1510150521.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:21.403Z,1510150521.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:21.433Z,1510150521.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:21.825Z,1510150521.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:21.840Z,1510150521.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:22.218Z,1510150522.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:22.240Z,1510150522.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:22.619Z,1510150522.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:22.635Z,1510150522.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:23.003Z,1510150523.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:23.029Z,1510150523.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:23.399Z,1510150523.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:23.427Z,1510150523.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:23.804Z,1510150523.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:23.836Z,1510150523.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:24.240Z,1510150524.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:24.285Z,1510150524.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:24.603Z,1510150524.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:24.619Z,1510150524.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:25.017Z,1510150525.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:25.050Z,1510150525.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:25.689Z,1510150525.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:25.706Z,1510150525.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:25.813Z,1510150525.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:25.859Z,1510150525.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:26.236Z,1510150526.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:26.252Z,1510150526.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:26.640Z,1510150526.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:26.655Z,1510150526.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:27.036Z,1510150527.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:27.052Z,1510150527.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:27.419Z,1510150527.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:27.449Z,1510150527.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:27.820Z,1510150527.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:27.850Z,1510150527.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:28.250Z,1510150528.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:28.267Z,1510150528.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:28.639Z,1510150528.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:28.660Z,1510150528.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:29.298Z,1510150529.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:29.314Z,1510150529.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:29.413Z,1510150529.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:29.459Z,1510150529.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:29.836Z,1510150529.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:29.852Z,1510150529.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:30.240Z,1510150530.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:30.256Z,1510150530.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:30.636Z,1510150530.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:30.652Z,1510150530.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:31.019Z,1510150531.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:31.051Z,1510150531.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:31.419Z,1510150531.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:31.455Z,1510150531.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:31.820Z,1510150531.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:31.836Z,1510150531.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:32.252Z,1510150532.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:32.268Z,1510150532.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:32.619Z,1510150532.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:32.635Z,1510150532.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:33.033Z,1510150533.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:33.060Z,1510150533.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:33.755Z,1510150533.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:33.772Z,1510150533.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:33.879Z,1510150533.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:33.911Z,1510150533.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:34.296Z,1510150534.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:34.312Z,1510150534.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:34.696Z,1510150534.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:34.712Z,1510150534.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:35.085Z,1510150535.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:35.119Z,1510150535.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:35.475Z,1510150535.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:35.503Z,1510150535.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:35.876Z,1510150535.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:35.933Z,1510150535.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:36.303Z,1510150536.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:36.359Z,1510150536.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:36.689Z,1510150536.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:36.720Z,1510150536.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:37.359Z,1510150537.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:37.409Z,1510150537.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:37.527Z,1510150537.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:37.571Z,1510150537.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:37.942Z,1510150537.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:38.004Z,1510150538.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:38.337Z,1510150538.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:38.371Z,1510150538.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:38.741Z,1510150538.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:38.768Z,1510150538.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:39.130Z,1510150539.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:39.146Z,1510150539.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:39.529Z,1510150539.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:39.545Z,1510150539.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:39.932Z,1510150539.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:39.948Z,1510150539.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:40.360Z,1510150540.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:40.376Z,1510150540.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:40.731Z,1510150540.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:40.751Z,1510150540.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:41.137Z,1510150541.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:41.161Z,1510150541.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:41.820Z,1510150541.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:41.843Z,1510150541.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:41.955Z,1510150541.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:42.003Z,1510150542.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:42.376Z,1510150542.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:42.392Z,1510150542.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:42.771Z,1510150542.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:42.788Z,1510150542.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:43.172Z,1510150543.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:43.188Z,1510150543.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:43.556Z,1510150543.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:43.583Z,1510150543.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:43.956Z,1510150543.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:43.996Z,1510150543.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:44.382Z,1510150544.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:44.403Z,1510150544.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:44.776Z,1510150544.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:44.795Z,1510150544.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:45.438Z,1510150545.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:45.454Z,1510150545.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:45.587Z,1510150545.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:45.627Z,1510150545.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:45.994Z,1510150545.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:46.039Z,1510150546.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:46.390Z,1510150546.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:46.406Z,1510150546.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:46.794Z,1510150546.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:46.810Z,1510150546.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:47.183Z,1510150547.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:47.198Z,1510150547.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:47.582Z,1510150547.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:47.599Z,1510150547.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:47.983Z,1510150547.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:48.003Z,1510150548.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:48.405Z,1510150548.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:48.435Z,1510150548.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:48.781Z,1510150548.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:48.797Z,1510150548.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:49.194Z,1510150549.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:49.210Z,1510150549.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:49.869Z,1510150549.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:49.885Z,1510150549.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:49.997Z,1510150549.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:50.043Z,1510150550.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:50.420Z,1510150550.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:50.437Z,1510150550.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:50.824Z,1510150550.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:50.840Z,1510150550.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:51.218Z,1510150551.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:51.239Z,1510150551.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:51.607Z,1510150551.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:51.633Z,1510150551.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:52.004Z,1510150552.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:52.034Z,1510150552.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:52.426Z,1510150552.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:52.446Z,1510150552.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:52.824Z,1510150552.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:52.840Z,1510150552.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:53.486Z,1510150553.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:53.502Z,1510150553.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:53.621Z,1510150553.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:53.659Z,1510150553.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:54.035Z,1510150554.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:54.055Z,1510150554.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:54.435Z,1510150554.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:54.451Z,1510150554.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:54.832Z,1510150554.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:54.848Z,1510150554.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:55.222Z,1510150555.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:55.239Z,1510150555.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:55.612Z,1510150555.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:55.639Z,1510150555.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:56.022Z,1510150556.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:56.039Z,1510150556.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:56.439Z,1510150556.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:56.455Z,1510150556.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:56.836Z,1510150556.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:56.852Z,1510150556.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:57.538Z,1510150557.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:57.603Z,1510150557.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:57.731Z,1510150557.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:57.751Z,1510150557.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:58.139Z,1510150558.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:58.210Z,1510150558.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:58.539Z,1510150558.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:58.556Z,1510150558.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:58.940Z,1510150558.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:58.956Z,1510150558.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:59.315Z,1510150559.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:59.381Z,1510150559.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:15:59.719Z,1510150559.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:15:59.754Z,1510150559.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:00.130Z,1510150560.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:00.191Z,1510150560.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:00.554Z,1510150560.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:00.586Z,1510150560.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:00.939Z,1510150560.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:00.956Z,1510150560.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:01.609Z,1510150561.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:01.638Z,1510150561.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:01.750Z,1510150561.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:01.766Z,1510150561.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:02.166Z,1510150562.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:02.202Z,1510150562.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:02.570Z,1510150562.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:02.603Z,1510150562.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:02.962Z,1510150562.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:02.990Z,1510150562.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:03.359Z,1510150563.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:03.376Z,1510150563.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:03.759Z,1510150563.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:03.775Z,1510150563.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:04.178Z,1510150564.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:04.208Z,1510150564.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:04.559Z,1510150564.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:04.576Z,1510150564.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:04.970Z,1510150564.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:05.008Z,1510150565.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:05.645Z,1510150565.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:05.661Z,1510150565.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:05.771Z,1510150565.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:05.810Z,1510150565.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:06.190Z,1510150566.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:06.213Z,1510150566.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:06.592Z,1510150566.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:06.612Z,1510150566.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:06.982Z,1510150566.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:07.012Z,1510150567.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:07.372Z,1510150567.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:07.404Z,1510150567.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:07.772Z,1510150567.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:07.809Z,1510150567.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:08.204Z,1510150568.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:08.260Z,1510150568.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:08.586Z,1510150568.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:08.619Z,1510150568.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:09.298Z,1510150569.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:09.314Z,1510150569.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:09.427Z,1510150569.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:09.459Z,1510150569.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:09.845Z,1510150569.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:09.861Z,1510150569.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:10.244Z,1510150570.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:10.260Z,1510150570.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:10.644Z,1510150570.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:10.660Z,1510150570.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:11.024Z,1510150571.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:11.052Z,1510150571.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:11.423Z,1510150571.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:11.440Z,1510150571.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:11.824Z,1510150571.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:11.840Z,1510150571.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:12.256Z,1510150572.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:12.275Z,1510150572.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:12.623Z,1510150572.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:12.640Z,1510150572.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:13.041Z,1510150573.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:13.072Z,1510150573.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:13.708Z,1510150573.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:13.724Z,1510150573.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:13.826Z,1510150573.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:13.875Z,1510150573.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:14.325Z,1510150574.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:14.342Z,1510150574.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:14.653Z,1510150574.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:14.669Z,1510150574.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:15.052Z,1510150575.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:15.069Z,1510150575.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:15.433Z,1510150575.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:15.461Z,1510150575.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:15.834Z,1510150575.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:15.866Z,1510150575.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:16.264Z,1510150576.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:16.280Z,1510150576.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:16.647Z,1510150576.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:16.673Z,1510150576.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:17.322Z,1510150577.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:17.338Z,1510150577.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:17.437Z,1510150577.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:17.483Z,1510150577.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:17.858Z,1510150577.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:17.880Z,1510150577.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:18.266Z,1510150578.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:18.282Z,1510150578.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:18.665Z,1510150578.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:18.681Z,1510150578.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:19.043Z,1510150579.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:19.076Z,1510150579.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:19.444Z,1510150579.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:19.476Z,1510150579.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:19.844Z,1510150579.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:19.896Z,1510150579.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:20.278Z,1510150580.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:20.320Z,1510150580.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:20.646Z,1510150580.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:20.663Z,1510150580.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:21.053Z,1510150581.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:21.107Z,1510150581.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:21.733Z,1510150581.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:21.749Z,1510150581.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:21.863Z,1510150581.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:21.920Z,1510150581.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:22.280Z,1510150582.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:22.296Z,1510150582.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:22.669Z,1510150582.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:22.693Z,1510150582.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:23.081Z,1510150583.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:23.097Z,1510150583.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:23.459Z,1510150583.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:23.494Z,1510150583.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:23.856Z,1510150583.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:23.871Z,1510150583.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:24.292Z,1510150584.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:24.308Z,1510150584.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:24.680Z,1510150584.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:24.697Z,1510150584.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:25.335Z,1510150585.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:25.351Z,1510150585.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:25.463Z,1510150585.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:25.495Z,1510150585.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:25.880Z,1510150585.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:25.896Z,1510150585.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:26.268Z,1510150586.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:26.292Z,1510150586.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:26.681Z,1510150586.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:26.697Z,1510150586.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:27.059Z,1510150587.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:27.092Z,1510150587.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:27.455Z,1510150587.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:27.470Z,1510150587.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:27.860Z,1510150587.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:27.876Z,1510150587.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:28.291Z,1510150588.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:28.315Z,1510150588.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:28.703Z,1510150588.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:28.718Z,1510150588.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:29.070Z,1510150589.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:29.200Z,1510150589.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:29.989Z,1510150589.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:30.047Z,1510150590.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:30.167Z,1510150590.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:30.204Z,1510150590.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:30.578Z,1510150590.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:30.604Z,1510150590.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:30.982Z,1510150590.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:31.012Z,1510150591.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:31.382Z,1510150591.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:31.416Z,1510150591.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:31.776Z,1510150591.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:31.849Z,1510150591.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:32.196Z,1510150592.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:32.212Z,1510150592.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:32.578Z,1510150592.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:32.611Z,1510150592.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:33.258Z,1510150593.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:33.276Z,1510150593.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:33.404Z,1510150593.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:33.420Z,1510150593.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:33.813Z,1510150593.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:33.830Z,1510150593.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:34.214Z,1510150594.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:34.230Z,1510150594.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:34.609Z,1510150594.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:34.626Z,1510150594.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:35.005Z,1510150595.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:35.021Z,1510150595.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:35.404Z,1510150595.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:35.421Z,1510150595.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:35.805Z,1510150595.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:35.822Z,1510150595.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:36.225Z,1510150596.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:36.248Z,1510150596.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:36.605Z,1510150596.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:36.621Z,1510150596.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:37.013Z,1510150597.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:37.030Z,1510150597.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:37.695Z,1510150597.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:37.716Z,1510150597.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:37.818Z,1510150597.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:37.863Z,1510150597.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:38.240Z,1510150598.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:38.256Z,1510150598.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:38.644Z,1510150598.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:38.667Z,1510150598.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:39.040Z,1510150599.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:39.056Z,1510150599.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:39.423Z,1510150599.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:39.456Z,1510150599.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:39.820Z,1510150599.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:39.858Z,1510150599.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:40.255Z,1510150600.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:40.272Z,1510150600.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:40.645Z,1510150600.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:40.668Z,1510150600.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:41.318Z,1510150601.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:41.357Z,1510150601.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:41.471Z,1510150601.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:41.508Z,1510150601.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:41.882Z,1510150601.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:41.947Z,1510150601.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:42.281Z,1510150602.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:42.325Z,1510150602.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:42.682Z,1510150602.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:42.708Z,1510150602.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:43.071Z,1510150603.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:43.111Z,1510150603.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:43.471Z,1510150603.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:43.524Z,1510150603.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:43.872Z,1510150603.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:43.888Z,1510150603.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:44.300Z,1510150604.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:44.356Z,1510150604.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:44.671Z,1510150604.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:44.687Z,1510150604.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:45.085Z,1510150605.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:45.112Z,1510150605.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:45.761Z,1510150605.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:45.778Z,1510150605.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:45.877Z,1510150605.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:45.923Z,1510150605.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:46.303Z,1510150606.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:46.319Z,1510150606.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:46.700Z,1510150606.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:46.719Z,1510150606.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:47.101Z,1510150607.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:47.117Z,1510150607.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:47.483Z,1510150607.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:47.513Z,1510150607.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:47.883Z,1510150607.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:47.913Z,1510150607.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:48.312Z,1510150608.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:48.328Z,1510150608.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:48.703Z,1510150608.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:48.720Z,1510150608.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:49.405Z,1510150609.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:49.421Z,1510150609.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:49.522Z,1510150609.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:49.571Z,1510150609.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:49.948Z,1510150609.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:49.964Z,1510150609.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:50.337Z,1510150610.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:50.367Z,1510150610.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:50.749Z,1510150610.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:50.765Z,1510150610.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:51.128Z,1510150611.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:51.152Z,1510150611.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:51.527Z,1510150611.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:51.543Z,1510150611.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:51.924Z,1510150611.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:51.940Z,1510150611.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:52.359Z,1510150612.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:52.419Z,1510150612.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:52.727Z,1510150612.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:52.742Z,1510150612.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:53.141Z,1510150613.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:53.171Z,1510150613.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:53.823Z,1510150613.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:53.843Z,1510150613.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:53.979Z,1510150613.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:54.020Z,1510150614.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:54.389Z,1510150614.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:54.419Z,1510150614.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:54.785Z,1510150614.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:54.818Z,1510150614.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:55.185Z,1510150615.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:55.222Z,1510150615.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:55.574Z,1510150615.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:55.590Z,1510150615.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:55.975Z,1510150615.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:55.996Z,1510150615.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:56.393Z,1510150616.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:56.419Z,1510150616.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:56.785Z,1510150616.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:56.821Z,1510150616.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:57.461Z,1510150617.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:57.477Z,1510150617.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:57.592Z,1510150617.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:57.626Z,1510150617.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:58.020Z,1510150618.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:58.036Z,1510150618.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:58.416Z,1510150618.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:58.432Z,1510150618.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:58.809Z,1510150618.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:58.830Z,1510150618.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:59.199Z,1510150619.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:59.228Z,1510150619.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:59.595Z,1510150619.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:16:59.630Z,1510150619.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:16:59.000Z,1510150620.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:00.025Z,1510150620.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:00.427Z,1510150620.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:00.443Z,1510150620.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:00.799Z,1510150620.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:00.832Z,1510150620.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:01.216Z,1510150621.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:01.233Z,1510150621.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:01.886Z,1510150621.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:01.925Z,1510150621.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:02.039Z,1510150622.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:02.085Z,1510150622.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:02.460Z,1510150622.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:02.476Z,1510150622.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:02.861Z,1510150622.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:02.883Z,1510150622.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:03.260Z,1510150623.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:03.276Z,1510150623.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:03.644Z,1510150623.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:03.675Z,1510150623.675 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:03.676Z,1510150623.676 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2017-11-08T14:17:03.676Z,1510150623.676 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T14:17:03.679Z,1510150623.679 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:03.679Z,1510150623.679 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2017-11-08T14:17:03.679Z,1510150623.679 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T14:17:03.682Z,1510150623.682 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:03.682Z,1510150623.682 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2017-11-08T14:17:03.682Z,1510150623.682 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T14:17:03.757Z,1510150623.757 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T14:17:03.757Z,1510150623.757 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T14:17:03.757Z,1510150623.757 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T14:17:04.040Z,1510150624.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:04.145Z,1510150624.145 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T14:17:04.145Z,1510150624.145 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2017-11-08T14:17:04.145Z,1510150624.145 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T14:17:04.145Z,1510150624.145 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2017-11-08T14:17:04.146Z,1510150624.146 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T14:17:04.146Z,1510150624.146 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2017-11-08T14:17:04.471Z,1510150624.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:04.510Z,1510150624.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T14:17:04.511Z,1510150624.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:17:04.511Z,1510150624.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:17:04.512Z,1510150624.512 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T14:17:04.512Z,1510150624.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:17:04.512Z,1510150624.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:17:04.513Z,1510150624.513 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T14:17:04.513Z,1510150624.513 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:17:04.514Z,1510150624.514 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:17:04.861Z,1510150624.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:04.891Z,1510150624.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T14:17:04.892Z,1510150624.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:05.529Z,1510150625.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:05.545Z,1510150625.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2017-11-08T14:17:05.546Z,1510150625.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:05.663Z,1510150625.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:05.714Z,1510150625.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T14:17:05.715Z,1510150625.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:06.079Z,1510150626.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:06.098Z,1510150626.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T14:17:06.099Z,1510150626.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:06.480Z,1510150626.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:06.499Z,1510150626.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T14:17:06.500Z,1510150626.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:06.891Z,1510150626.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:06.914Z,1510150626.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T14:17:06.918Z,1510150626.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:07.263Z,1510150627.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:07.305Z,1510150627.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T14:17:07.306Z,1510150627.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:07.659Z,1510150627.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:07.667Z,1510150627.667 [BPC1](ERROR): Failed to receive battery data
2017-11-08T14:17:07.667Z,1510150627.667 [BPC1] Communications Fault, FailCount= 1
2017-11-08T14:17:07.667Z,1510150627.667 [BPC1](ERROR): Communications Fault
2017-11-08T14:17:07.707Z,1510150627.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T14:17:07.708Z,1510150627.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:07.785Z,1510150627.785 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T14:17:08.060Z,1510150628.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:08.094Z,1510150628.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T14:17:08.095Z,1510150628.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:08.493Z,1510150628.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:08.515Z,1510150628.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T14:17:08.516Z,1510150628.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:08.859Z,1510150628.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:08.891Z,1510150628.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T14:17:08.892Z,1510150628.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:08.981Z,1510150628.981 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T14:17:08.981Z,1510150628.981 [BPC1] No Fault, FailCount= 1
2017-11-08T14:17:09.279Z,1510150629.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:09.355Z,1510150629.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-08T14:17:09.356Z,1510150629.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:09.957Z,1510150629.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:09.986Z,1510150629.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2017-11-08T14:17:09.987Z,1510150629.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:10.100Z,1510150630.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:10.116Z,1510150630.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T14:17:10.117Z,1510150630.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:10.512Z,1510150630.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:10.543Z,1510150630.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T14:17:10.544Z,1510150630.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:10.911Z,1510150630.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:10.946Z,1510150630.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-08T14:17:10.947Z,1510150630.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:11.309Z,1510150631.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:11.341Z,1510150631.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T14:17:11.342Z,1510150631.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:11.700Z,1510150631.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:11.715Z,1510150631.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T14:17:11.717Z,1510150631.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:12.098Z,1510150632.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:12.124Z,1510150632.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T14:17:12.125Z,1510150632.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:12.518Z,1510150632.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:12.525Z,1510150632.525 [PNI_TCM](ERROR): CRC does not match. Expected:0x58338 got:0x1307
2017-11-08T14:17:12.546Z,1510150632.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T14:17:12.547Z,1510150632.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:12.913Z,1510150632.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:12.948Z,1510150632.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T14:17:12.949Z,1510150632.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:13.583Z,1510150633.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:13.603Z,1510150633.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2017-11-08T14:17:13.604Z,1510150633.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:13.737Z,1510150633.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:13.765Z,1510150633.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T14:17:13.766Z,1510150633.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:14.151Z,1510150634.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:14.167Z,1510150634.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T14:17:14.168Z,1510150634.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:14.547Z,1510150634.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:14.567Z,1510150634.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T14:17:14.568Z,1510150634.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:14.948Z,1510150634.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:14.964Z,1510150634.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T14:17:14.965Z,1510150634.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:15.335Z,1510150635.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:15.360Z,1510150635.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T14:17:15.361Z,1510150635.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:15.731Z,1510150635.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:15.755Z,1510150635.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T14:17:15.756Z,1510150635.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:16.128Z,1510150636.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:16.167Z,1510150636.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T14:17:16.168Z,1510150636.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:16.558Z,1510150636.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:16.576Z,1510150636.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T14:17:16.577Z,1510150636.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:16.931Z,1510150636.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:16.955Z,1510150636.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T14:17:16.956Z,1510150636.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:17.352Z,1510150637.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:17.407Z,1510150637.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T14:17:17.408Z,1510150637.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:18.058Z,1510150638.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:18.083Z,1510150638.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T14:17:18.084Z,1510150638.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:18.219Z,1510150638.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:18.235Z,1510150638.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2017-11-08T14:17:18.236Z,1510150638.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:18.633Z,1510150638.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:18.660Z,1510150638.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2017-11-08T14:17:18.661Z,1510150638.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:19.030Z,1510150639.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:19.061Z,1510150639.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2017-11-08T14:17:19.062Z,1510150639.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:19.425Z,1510150639.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:19.461Z,1510150639.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-08T14:17:19.462Z,1510150639.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:19.820Z,1510150639.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:19.835Z,1510150639.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-08T14:17:19.836Z,1510150639.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:20.215Z,1510150640.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:20.235Z,1510150640.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-08T14:17:20.236Z,1510150640.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:20.618Z,1510150640.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:20.634Z,1510150640.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-11-08T14:17:20.635Z,1510150640.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:21.020Z,1510150641.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:21.036Z,1510150641.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-08T14:17:21.037Z,1510150641.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:21.450Z,1510150641.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:21.466Z,1510150641.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-08T14:17:21.467Z,1510150641.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:21.837Z,1510150641.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:21.861Z,1510150641.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-08T14:17:21.862Z,1510150641.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:22.506Z,1510150642.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:22.522Z,1510150642.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T14:17:22.523Z,1510150642.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:22.635Z,1510150642.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:22.683Z,1510150642.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-08T14:17:22.684Z,1510150642.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:23.055Z,1510150643.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:23.071Z,1510150643.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-08T14:17:23.072Z,1510150643.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:23.452Z,1510150643.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:23.467Z,1510150643.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-08T14:17:23.468Z,1510150643.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:23.856Z,1510150643.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:23.872Z,1510150643.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:24.236Z,1510150644.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:24.261Z,1510150644.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:24.639Z,1510150644.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:24.665Z,1510150644.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:25.037Z,1510150645.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:25.069Z,1510150645.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:25.463Z,1510150645.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:25.484Z,1510150645.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:25.835Z,1510150645.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:25.865Z,1510150645.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:26.255Z,1510150646.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:26.276Z,1510150646.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:26.925Z,1510150646.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:26.941Z,1510150646.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:27.079Z,1510150647.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:27.119Z,1510150647.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:27.500Z,1510150647.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:27.516Z,1510150647.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:27.900Z,1510150647.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:27.916Z,1510150647.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:28.300Z,1510150648.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:28.344Z,1510150648.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:28.679Z,1510150648.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:28.695Z,1510150648.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:29.080Z,1510150649.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:29.096Z,1510150649.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:29.512Z,1510150649.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:29.571Z,1510150649.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:29.893Z,1510150649.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:29.921Z,1510150649.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:30.570Z,1510150650.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:30.619Z,1510150650.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:30.730Z,1510150650.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:30.780Z,1510150650.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:31.156Z,1510150651.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:31.172Z,1510150651.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:31.545Z,1510150651.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:31.575Z,1510150651.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:31.945Z,1510150651.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:31.974Z,1510150651.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:32.335Z,1510150652.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:32.351Z,1510150652.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:32.735Z,1510150652.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:32.751Z,1510150652.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:33.132Z,1510150653.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:33.148Z,1510150653.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:33.567Z,1510150653.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:33.583Z,1510150653.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:33.931Z,1510150653.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:33.947Z,1510150653.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:34.345Z,1510150654.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:34.369Z,1510150654.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:35.031Z,1510150655.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:35.052Z,1510150655.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:35.184Z,1510150655.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:35.226Z,1510150655.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:35.592Z,1510150655.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:35.608Z,1510150655.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:35.995Z,1510150655.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:36.012Z,1510150656.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:36.388Z,1510150656.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:36.404Z,1510150656.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:36.776Z,1510150656.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:36.801Z,1510150656.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:37.203Z,1510150657.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:37.219Z,1510150657.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:37.592Z,1510150657.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:37.608Z,1510150657.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:38.267Z,1510150658.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:38.301Z,1510150658.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:38.413Z,1510150658.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:38.462Z,1510150658.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:38.826Z,1510150658.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:38.894Z,1510150658.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:39.228Z,1510150659.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:39.259Z,1510150659.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:39.630Z,1510150659.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:39.667Z,1510150659.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:40.019Z,1510150660.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:40.058Z,1510150660.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:40.415Z,1510150660.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:40.431Z,1510150660.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:40.820Z,1510150660.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:40.857Z,1510150660.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:41.251Z,1510150661.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:41.268Z,1510150661.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:41.615Z,1510150661.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:41.635Z,1510150661.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:42.038Z,1510150662.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:42.064Z,1510150662.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:42.714Z,1510150662.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:42.730Z,1510150662.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:42.829Z,1510150662.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:42.879Z,1510150662.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:43.255Z,1510150663.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:43.271Z,1510150663.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:43.652Z,1510150663.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:43.672Z,1510150663.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:44.053Z,1510150664.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:44.069Z,1510150664.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:44.435Z,1510150664.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:44.471Z,1510150664.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:44.832Z,1510150664.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:44.847Z,1510150664.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:45.268Z,1510150665.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:45.288Z,1510150665.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:45.649Z,1510150665.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:45.680Z,1510150665.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:46.322Z,1510150666.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:46.338Z,1510150666.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:46.447Z,1510150666.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:46.497Z,1510150666.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:46.867Z,1510150666.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:46.888Z,1510150666.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:47.264Z,1510150667.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:47.280Z,1510150667.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:47.672Z,1510150667.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:47.689Z,1510150667.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:48.048Z,1510150668.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:48.082Z,1510150668.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:48.447Z,1510150668.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:48.472Z,1510150668.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:48.848Z,1510150668.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:48.882Z,1510150668.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:49.274Z,1510150669.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:49.299Z,1510150669.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:49.647Z,1510150669.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:49.697Z,1510150669.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:50.069Z,1510150670.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:50.089Z,1510150670.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:50.746Z,1510150670.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:50.799Z,1510150670.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:50.936Z,1510150670.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:50.953Z,1510150670.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:51.326Z,1510150671.326 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T14:17:51.326Z,1510150671.326 [NAL9602] Data Fault, FailCount= 1
2017-11-08T14:17:51.327Z,1510150671.327 [NAL9602](ERROR): Data Fault
2017-11-08T14:17:51.344Z,1510150671.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:51.400Z,1510150671.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:51.481Z,1510150671.481 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T14:17:51.726Z,1510150671.726 [NAL9602](INFO): Powering down
2017-11-08T14:17:51.744Z,1510150671.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:51.760Z,1510150671.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:52.138Z,1510150672.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:52.191Z,1510150672.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:52.542Z,1510150672.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:52.558Z,1510150672.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:52.656Z,1510150672.656 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T14:17:52.656Z,1510150672.656 [NAL9602] No Fault, FailCount= 1
2017-11-08T14:17:52.943Z,1510150672.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:52.958Z,1510150672.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:53.344Z,1510150673.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:53.360Z,1510150673.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:53.743Z,1510150673.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:53.763Z,1510150673.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:54.142Z,1510150674.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:54.158Z,1510150674.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:54.543Z,1510150674.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:54.559Z,1510150674.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:54.943Z,1510150674.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:54.959Z,1510150674.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:55.339Z,1510150675.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:55.354Z,1510150675.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:55.743Z,1510150675.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:55.759Z,1510150675.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:56.142Z,1510150676.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:56.158Z,1510150676.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:56.543Z,1510150676.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:56.558Z,1510150676.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:56.939Z,1510150676.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:56.955Z,1510150676.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:57.338Z,1510150677.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:57.353Z,1510150677.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:57.742Z,1510150677.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:57.758Z,1510150677.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:58.139Z,1510150678.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:58.155Z,1510150678.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:58.538Z,1510150678.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:58.553Z,1510150678.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:58.943Z,1510150678.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:58.964Z,1510150678.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:59.339Z,1510150679.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:59.355Z,1510150679.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:17:59.739Z,1510150679.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:17:59.754Z,1510150679.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:00.143Z,1510150680.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:00.163Z,1510150680.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:00.543Z,1510150680.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:00.599Z,1510150680.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:00.943Z,1510150680.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:00.963Z,1510150680.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:01.343Z,1510150681.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:01.359Z,1510150681.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:01.743Z,1510150681.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:01.759Z,1510150681.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:02.138Z,1510150682.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:02.159Z,1510150682.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:02.543Z,1510150682.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:02.563Z,1510150682.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:02.940Z,1510150682.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:02.956Z,1510150682.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:03.343Z,1510150683.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:03.358Z,1510150683.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:03.747Z,1510150683.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:03.763Z,1510150683.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:04.142Z,1510150684.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:04.158Z,1510150684.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:04.543Z,1510150684.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:04.559Z,1510150684.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:04.948Z,1510150684.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:04.995Z,1510150684.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:05.341Z,1510150685.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:05.357Z,1510150685.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:05.748Z,1510150685.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:05.763Z,1510150685.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:06.148Z,1510150686.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:06.164Z,1510150686.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:06.546Z,1510150686.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:06.563Z,1510150686.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:06.945Z,1510150686.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:06.962Z,1510150686.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:07.346Z,1510150687.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:07.363Z,1510150687.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:07.746Z,1510150687.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:07.763Z,1510150687.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:08.146Z,1510150688.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:08.162Z,1510150688.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:08.546Z,1510150688.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:08.562Z,1510150688.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:08.942Z,1510150688.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:08.958Z,1510150688.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:09.346Z,1510150689.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:09.361Z,1510150689.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:09.746Z,1510150689.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:09.763Z,1510150689.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:10.147Z,1510150690.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:10.163Z,1510150690.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:10.546Z,1510150690.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:10.561Z,1510150690.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:10.946Z,1510150690.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:10.963Z,1510150690.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:11.342Z,1510150691.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:11.416Z,1510150691.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:11.747Z,1510150691.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:11.763Z,1510150691.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:12.147Z,1510150692.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:12.230Z,1510150692.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:12.546Z,1510150692.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:12.563Z,1510150692.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:12.947Z,1510150692.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:12.996Z,1510150692.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:13.347Z,1510150693.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:13.367Z,1510150693.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:13.746Z,1510150693.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:13.838Z,1510150693.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:14.139Z,1510150694.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:14.267Z,1510150694.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:14.539Z,1510150694.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:14.581Z,1510150694.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:14.943Z,1510150694.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:14.979Z,1510150694.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:15.347Z,1510150695.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:15.362Z,1510150695.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:15.742Z,1510150695.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:15.765Z,1510150695.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:16.150Z,1510150696.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:16.166Z,1510150696.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:16.546Z,1510150696.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:16.567Z,1510150696.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:16.946Z,1510150696.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:16.962Z,1510150696.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:17.350Z,1510150697.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:17.367Z,1510150697.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:17.746Z,1510150697.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:17.762Z,1510150697.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:18.145Z,1510150698.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:18.162Z,1510150698.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:18.543Z,1510150698.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:18.579Z,1510150698.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:18.939Z,1510150698.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:18.972Z,1510150698.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:19.342Z,1510150699.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:19.369Z,1510150699.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:19.743Z,1510150699.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:19.777Z,1510150699.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:20.143Z,1510150700.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:20.168Z,1510150700.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:20.542Z,1510150700.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:20.567Z,1510150700.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:20.943Z,1510150700.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:20.968Z,1510150700.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:21.342Z,1510150701.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:21.367Z,1510150701.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:21.742Z,1510150701.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:21.767Z,1510150701.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:22.126Z,1510150702.126 [NAL9602](INFO): Powering up NAL9602
2017-11-08T14:18:22.144Z,1510150702.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:22.211Z,1510150702.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:22.542Z,1510150702.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:22.567Z,1510150702.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:22.939Z,1510150702.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:22.974Z,1510150702.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:23.343Z,1510150703.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:23.376Z,1510150703.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:23.739Z,1510150703.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:23.771Z,1510150703.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:24.143Z,1510150704.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:24.167Z,1510150704.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:24.539Z,1510150704.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:24.568Z,1510150704.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:24.943Z,1510150704.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:24.974Z,1510150704.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:25.338Z,1510150705.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:25.377Z,1510150705.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:25.743Z,1510150705.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:25.772Z,1510150705.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:26.139Z,1510150706.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:26.154Z,1510150706.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:26.542Z,1510150706.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:26.581Z,1510150706.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:26.943Z,1510150706.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:26.978Z,1510150706.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:27.342Z,1510150707.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:27.380Z,1510150707.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:27.742Z,1510150707.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:27.781Z,1510150707.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:28.143Z,1510150708.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:28.178Z,1510150708.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:28.542Z,1510150708.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:28.581Z,1510150708.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:28.943Z,1510150708.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:28.978Z,1510150708.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:29.343Z,1510150709.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:29.383Z,1510150709.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:29.743Z,1510150709.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:29.759Z,1510150709.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:30.143Z,1510150710.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:30.159Z,1510150710.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:30.543Z,1510150710.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:30.559Z,1510150710.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:30.943Z,1510150710.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:30.963Z,1510150710.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:31.342Z,1510150711.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:31.358Z,1510150711.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:31.743Z,1510150711.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:31.763Z,1510150711.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:32.147Z,1510150712.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:32.167Z,1510150712.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:32.558Z,1510150712.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:32.594Z,1510150712.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:32.929Z,1510150712.929 [NAL9602](INFO): NAL9602 initialized
2017-11-08T14:18:32.946Z,1510150712.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:32.962Z,1510150712.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:33.346Z,1510150713.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:33.419Z,1510150713.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:33.758Z,1510150713.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:33.791Z,1510150713.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:34.158Z,1510150714.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:34.174Z,1510150714.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:34.557Z,1510150714.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:34.617Z,1510150714.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:34.947Z,1510150714.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:34.967Z,1510150714.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:35.370Z,1510150715.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:35.394Z,1510150715.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:35.757Z,1510150715.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:35.797Z,1510150715.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:36.436Z,1510150716.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:36.456Z,1510150716.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:36.563Z,1510150716.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:36.605Z,1510150716.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:36.986Z,1510150716.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:37.001Z,1510150717.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:37.389Z,1510150717.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:37.405Z,1510150717.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:37.785Z,1510150717.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:37.801Z,1510150717.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:38.167Z,1510150718.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:38.199Z,1510150718.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:38.567Z,1510150718.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:38.603Z,1510150718.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:38.968Z,1510150718.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:38.998Z,1510150718.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:39.396Z,1510150719.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:39.411Z,1510150719.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:39.759Z,1510150719.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:39.776Z,1510150719.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:40.189Z,1510150720.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:40.211Z,1510150720.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:40.848Z,1510150720.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:40.863Z,1510150720.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:40.965Z,1510150720.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:40.994Z,1510150720.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:41.382Z,1510150721.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:41.419Z,1510150721.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:41.793Z,1510150721.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:41.808Z,1510150721.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:42.182Z,1510150722.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:42.214Z,1510150722.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:42.572Z,1510150722.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:42.604Z,1510150722.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:42.968Z,1510150722.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:42.984Z,1510150722.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:43.399Z,1510150723.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:43.416Z,1510150723.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:43.786Z,1510150723.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:43.818Z,1510150723.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:44.446Z,1510150724.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:44.462Z,1510150724.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:44.574Z,1510150724.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:44.602Z,1510150724.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:44.990Z,1510150724.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:45.054Z,1510150725.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:45.401Z,1510150725.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:45.417Z,1510150725.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:45.790Z,1510150725.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:45.819Z,1510150725.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:46.180Z,1510150726.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:46.216Z,1510150726.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:46.580Z,1510150726.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:46.595Z,1510150726.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:46.985Z,1510150726.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:47.017Z,1510150727.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:47.413Z,1510150727.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:47.429Z,1510150727.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:47.784Z,1510150727.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:47.800Z,1510150727.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:48.189Z,1510150728.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:48.227Z,1510150728.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:49.533Z,1510150729.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:49.549Z,1510150729.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:49.685Z,1510150729.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:49.735Z,1510150729.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:50.104Z,1510150730.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:50.135Z,1510150730.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:50.499Z,1510150730.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:50.526Z,1510150730.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:50.898Z,1510150730.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:50.925Z,1510150730.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:51.288Z,1510150731.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:51.333Z,1510150731.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:51.687Z,1510150731.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:51.727Z,1510150731.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:52.091Z,1510150732.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:52.108Z,1510150732.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:52.510Z,1510150732.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:52.544Z,1510150732.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:52.907Z,1510150732.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:52.936Z,1510150732.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:53.586Z,1510150733.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:53.602Z,1510150733.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:53.730Z,1510150733.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:53.751Z,1510150733.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:54.138Z,1510150734.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:54.160Z,1510150734.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:54.537Z,1510150734.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:54.555Z,1510150734.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:54.938Z,1510150734.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:54.955Z,1510150734.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:55.332Z,1510150735.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:55.388Z,1510150735.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:55.727Z,1510150735.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:55.743Z,1510150735.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:56.131Z,1510150736.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:56.148Z,1510150736.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:56.550Z,1510150736.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:56.605Z,1510150736.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:56.925Z,1510150736.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:56.943Z,1510150736.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:57.338Z,1510150737.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:57.359Z,1510150737.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:58.005Z,1510150738.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:58.059Z,1510150738.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:58.197Z,1510150738.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:58.241Z,1510150738.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:58.606Z,1510150738.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:58.651Z,1510150738.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:59.009Z,1510150739.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:59.038Z,1510150739.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:59.411Z,1510150739.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:59.437Z,1510150739.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:18:59.792Z,1510150739.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:18:59.809Z,1510150739.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:00.196Z,1510150740.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:00.212Z,1510150740.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:00.630Z,1510150740.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:00.647Z,1510150740.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:01.010Z,1510150741.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:01.036Z,1510150741.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:01.679Z,1510150741.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:01.699Z,1510150741.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:01.798Z,1510150741.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:01.814Z,1510150741.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:02.218Z,1510150742.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:02.253Z,1510150742.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:02.618Z,1510150742.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:02.645Z,1510150742.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:03.014Z,1510150743.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:03.047Z,1510150743.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:03.403Z,1510150743.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:03.420Z,1510150743.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:03.803Z,1510150743.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:03.819Z,1510150743.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:04.200Z,1510150744.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:04.232Z,1510150744.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:04.637Z,1510150744.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:04.653Z,1510150744.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:05.003Z,1510150745.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:05.023Z,1510150745.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:05.421Z,1510150745.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:05.451Z,1510150745.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:06.092Z,1510150746.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:06.111Z,1510150746.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:06.223Z,1510150746.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:06.275Z,1510150746.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:06.644Z,1510150746.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:06.699Z,1510150746.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:07.038Z,1510150747.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:07.055Z,1510150747.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:07.436Z,1510150747.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:07.452Z,1510150747.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:07.823Z,1510150747.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:07.849Z,1510150747.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:08.220Z,1510150748.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:08.250Z,1510150748.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:08.651Z,1510150748.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:08.667Z,1510150748.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:09.044Z,1510150749.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:09.067Z,1510150749.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:09.715Z,1510150749.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:09.746Z,1510150749.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:09.858Z,1510150749.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:09.907Z,1510150749.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:10.286Z,1510150750.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:10.301Z,1510150750.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:10.674Z,1510150750.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:10.707Z,1510150750.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:11.069Z,1510150751.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:11.103Z,1510150751.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:11.463Z,1510150751.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:11.501Z,1510150751.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:11.863Z,1510150751.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:11.900Z,1510150751.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:12.260Z,1510150752.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:12.276Z,1510150752.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:12.692Z,1510150752.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:12.708Z,1510150752.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:13.059Z,1510150753.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:13.076Z,1510150753.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:13.473Z,1510150753.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:13.500Z,1510150753.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:14.158Z,1510150754.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:14.176Z,1510150754.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:14.315Z,1510150754.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:14.359Z,1510150754.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:14.722Z,1510150754.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:14.754Z,1510150754.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:15.126Z,1510150755.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:15.159Z,1510150755.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:15.522Z,1510150755.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:15.555Z,1510150755.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:15.912Z,1510150755.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:15.929Z,1510150755.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:16.329Z,1510150756.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:16.360Z,1510150756.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:16.720Z,1510150756.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:16.753Z,1510150756.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:17.403Z,1510150757.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:17.467Z,1510150757.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:17.584Z,1510150757.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:17.616Z,1510150757.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:18.005Z,1510150758.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:18.021Z,1510150758.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:18.403Z,1510150758.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:18.437Z,1510150758.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:18.794Z,1510150758.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:18.827Z,1510150758.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:19.184Z,1510150759.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:19.200Z,1510150759.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:19.583Z,1510150759.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:19.628Z,1510150759.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:19.984Z,1510150759.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:20.001Z,1510150760.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:20.410Z,1510150760.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:20.471Z,1510150760.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:20.787Z,1510150760.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:20.804Z,1510150760.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:21.193Z,1510150761.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:21.249Z,1510150761.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:21.878Z,1510150761.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:21.894Z,1510150761.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:21.999Z,1510150761.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:22.051Z,1510150762.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:22.420Z,1510150762.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:22.439Z,1510150762.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:22.814Z,1510150762.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:22.836Z,1510150762.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:23.212Z,1510150763.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:23.229Z,1510150763.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:23.599Z,1510150763.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:23.625Z,1510150763.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:23.000Z,1510150764.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:24.025Z,1510150764.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:24.426Z,1510150764.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:24.443Z,1510150764.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:24.820Z,1510150764.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:24.844Z,1510150764.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:25.489Z,1510150765.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:25.524Z,1510150765.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:25.637Z,1510150765.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:25.692Z,1510150765.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:26.062Z,1510150766.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:26.092Z,1510150766.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:26.454Z,1510150766.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:26.486Z,1510150766.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:26.853Z,1510150766.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:26.886Z,1510150766.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:27.247Z,1510150767.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:27.279Z,1510150767.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:27.639Z,1510150767.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:27.681Z,1510150767.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:28.040Z,1510150768.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:28.056Z,1510150768.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:28.476Z,1510150768.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:28.535Z,1510150768.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:28.843Z,1510150768.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:28.890Z,1510150768.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:29.257Z,1510150769.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:29.291Z,1510150769.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:29.939Z,1510150769.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:29.955Z,1510150769.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:30.054Z,1510150770.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:30.110Z,1510150770.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:30.466Z,1510150770.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:30.497Z,1510150770.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:30.883Z,1510150770.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:30.900Z,1510150770.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:31.280Z,1510150771.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:31.315Z,1510150771.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:31.659Z,1510150771.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:31.684Z,1510150771.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:32.060Z,1510150772.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:32.076Z,1510150772.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:32.489Z,1510150772.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:32.505Z,1510150772.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:32.873Z,1510150772.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:32.911Z,1510150772.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:33.587Z,1510150773.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:33.620Z,1510150773.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:33.760Z,1510150773.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:33.777Z,1510150773.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:34.170Z,1510150774.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:34.202Z,1510150774.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:34.575Z,1510150774.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:34.599Z,1510150774.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:34.970Z,1510150774.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:35.001Z,1510150775.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:35.359Z,1510150775.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:35.376Z,1510150775.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:35.755Z,1510150775.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:35.776Z,1510150775.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:36.159Z,1510150776.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:36.176Z,1510150776.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:36.586Z,1510150776.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:36.607Z,1510150776.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:36.958Z,1510150776.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:36.975Z,1510150776.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:37.370Z,1510150777.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:37.401Z,1510150777.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:38.047Z,1510150778.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:38.063Z,1510150778.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:38.165Z,1510150778.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:38.195Z,1510150778.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:38.597Z,1510150778.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:38.613Z,1510150778.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:38.993Z,1510150778.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:39.009Z,1510150779.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:39.386Z,1510150779.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:39.419Z,1510150779.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:39.772Z,1510150779.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:39.789Z,1510150779.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:40.176Z,1510150780.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:40.192Z,1510150780.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:40.607Z,1510150780.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:40.624Z,1510150780.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:40.986Z,1510150780.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:41.040Z,1510150781.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:41.659Z,1510150781.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:41.675Z,1510150781.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:41.777Z,1510150781.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:41.794Z,1510150781.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:42.198Z,1510150782.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:42.231Z,1510150782.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:42.593Z,1510150782.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:42.644Z,1510150782.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:42.997Z,1510150782.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:43.025Z,1510150783.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:43.383Z,1510150783.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:43.436Z,1510150783.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:43.780Z,1510150783.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:43.799Z,1510150783.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:44.185Z,1510150784.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:44.212Z,1510150784.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:44.615Z,1510150784.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:44.632Z,1510150784.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:44.983Z,1510150784.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:44.999Z,1510150784.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:45.397Z,1510150785.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:45.426Z,1510150785.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:46.074Z,1510150786.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:46.090Z,1510150786.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:46.203Z,1510150786.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:46.233Z,1510150786.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:46.625Z,1510150786.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:46.640Z,1510150786.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:47.020Z,1510150787.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:47.036Z,1510150787.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:47.416Z,1510150787.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:47.432Z,1510150787.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:47.803Z,1510150787.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:47.829Z,1510150787.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:48.204Z,1510150788.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:48.230Z,1510150788.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:48.626Z,1510150788.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:48.643Z,1510150788.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:49.025Z,1510150789.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:49.047Z,1510150789.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:49.688Z,1510150789.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:49.724Z,1510150789.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:49.833Z,1510150789.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:49.875Z,1510150789.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:50.262Z,1510150790.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:50.278Z,1510150790.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:50.650Z,1510150790.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:50.682Z,1510150790.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:51.046Z,1510150791.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:51.077Z,1510150791.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:51.439Z,1510150791.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:51.485Z,1510150791.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:51.835Z,1510150791.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:51.852Z,1510150791.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:52.239Z,1510150792.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:52.255Z,1510150792.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:52.672Z,1510150792.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:52.687Z,1510150792.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:53.035Z,1510150793.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:53.052Z,1510150793.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:53.453Z,1510150793.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:53.482Z,1510150793.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:54.131Z,1510150794.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:54.152Z,1510150794.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:54.249Z,1510150794.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:54.294Z,1510150794.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:54.672Z,1510150794.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:54.689Z,1510150794.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:55.076Z,1510150795.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:55.092Z,1510150795.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:55.476Z,1510150795.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:55.492Z,1510150795.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:55.855Z,1510150795.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:55.884Z,1510150795.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:56.252Z,1510150796.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:56.268Z,1510150796.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:56.682Z,1510150796.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:56.747Z,1510150796.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:57.076Z,1510150797.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:57.093Z,1510150797.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:57.742Z,1510150797.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:57.763Z,1510150797.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:57.898Z,1510150797.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:57.943Z,1510150797.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:58.306Z,1510150798.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:58.338Z,1510150798.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:58.705Z,1510150798.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:58.740Z,1510150798.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:59.102Z,1510150799.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:59.118Z,1510150799.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:59.494Z,1510150799.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:59.511Z,1510150799.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:19:59.893Z,1510150799.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:19:59.909Z,1510150799.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:00.294Z,1510150800.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:00.312Z,1510150800.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:00.718Z,1510150800.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:00.741Z,1510150800.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:01.094Z,1510150801.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:01.110Z,1510150801.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:01.505Z,1510150801.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:01.538Z,1510150801.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:02.228Z,1510150802.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:02.244Z,1510150802.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:02.359Z,1510150802.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:02.399Z,1510150802.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:02.780Z,1510150802.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:02.796Z,1510150802.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:03.180Z,1510150803.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:03.223Z,1510150803.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:03.573Z,1510150803.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:03.599Z,1510150803.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:03.959Z,1510150803.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:03.976Z,1510150803.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:04.355Z,1510150804.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:04.410Z,1510150804.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:04.759Z,1510150804.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:04.775Z,1510150804.775 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:04.775Z,1510150804.775 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2017-11-08T14:20:04.775Z,1510150804.776 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T14:20:04.777Z,1510150804.777 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:04.778Z,1510150804.778 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2017-11-08T14:20:04.778Z,1510150804.778 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T14:20:04.779Z,1510150804.779 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:04.779Z,1510150804.779 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2017-11-08T14:20:04.779Z,1510150804.779 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T14:20:04.877Z,1510150804.877 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T14:20:04.877Z,1510150804.877 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T14:20:04.877Z,1510150804.877 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T14:20:05.164Z,1510150805.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:05.303Z,1510150805.303 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T14:20:05.303Z,1510150805.303 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2017-11-08T14:20:05.304Z,1510150805.304 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T14:20:05.304Z,1510150805.304 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2017-11-08T14:20:05.304Z,1510150805.304 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T14:20:05.304Z,1510150805.304 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2017-11-08T14:20:05.581Z,1510150805.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:05.605Z,1510150805.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T14:20:05.605Z,1510150805.605 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:20:05.605Z,1510150805.605 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:20:05.606Z,1510150805.606 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T14:20:05.606Z,1510150805.606 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:20:05.606Z,1510150805.606 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:20:05.607Z,1510150805.607 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T14:20:05.607Z,1510150805.607 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:20:05.608Z,1510150805.608 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:20:05.969Z,1510150805.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:05.985Z,1510150805.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T14:20:05.986Z,1510150805.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:06.656Z,1510150806.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:06.672Z,1510150806.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2017-11-08T14:20:06.673Z,1510150806.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:06.783Z,1510150806.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:06.809Z,1510150806.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T14:20:06.810Z,1510150806.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:07.205Z,1510150807.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:07.229Z,1510150807.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2017-11-08T14:20:07.230Z,1510150807.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:07.600Z,1510150807.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:07.616Z,1510150807.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T14:20:07.617Z,1510150807.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:07.989Z,1510150807.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:08.015Z,1510150808.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T14:20:08.016Z,1510150808.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:08.383Z,1510150808.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:08.414Z,1510150808.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T14:20:08.415Z,1510150808.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:08.779Z,1510150808.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:08.813Z,1510150808.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T14:20:08.814Z,1510150808.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:09.180Z,1510150809.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:09.208Z,1510150809.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T14:20:09.213Z,1510150809.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:09.611Z,1510150809.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:09.627Z,1510150809.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-08T14:20:09.628Z,1510150809.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:09.975Z,1510150809.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:09.995Z,1510150809.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T14:20:09.996Z,1510150809.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:10.393Z,1510150810.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:10.420Z,1510150810.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T14:20:10.421Z,1510150810.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:11.070Z,1510150811.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:11.091Z,1510150811.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2017-11-08T14:20:11.092Z,1510150811.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:11.213Z,1510150811.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:11.258Z,1510150811.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-08T14:20:11.259Z,1510150811.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:11.626Z,1510150811.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:11.642Z,1510150811.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T14:20:11.642Z,1510150811.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:12.025Z,1510150812.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:12.047Z,1510150812.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-08T14:20:12.048Z,1510150812.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:12.426Z,1510150812.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:12.442Z,1510150812.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T14:20:12.442Z,1510150812.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:12.820Z,1510150812.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:12.836Z,1510150812.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T14:20:12.837Z,1510150812.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:13.237Z,1510150813.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:13.277Z,1510150813.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T14:20:13.277Z,1510150813.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:13.628Z,1510150813.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:13.672Z,1510150813.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T14:20:13.673Z,1510150813.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:14.308Z,1510150814.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:14.323Z,1510150814.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2017-11-08T14:20:14.324Z,1510150814.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:14.463Z,1510150814.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:14.495Z,1510150814.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T14:20:14.496Z,1510150814.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:14.871Z,1510150814.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:14.887Z,1510150814.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T14:20:14.888Z,1510150814.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:15.270Z,1510150815.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:15.293Z,1510150815.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T14:20:15.294Z,1510150815.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:15.668Z,1510150815.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:15.688Z,1510150815.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T14:20:15.689Z,1510150815.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:16.057Z,1510150816.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:16.073Z,1510150816.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T14:20:16.074Z,1510150816.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:16.447Z,1510150816.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:16.471Z,1510150816.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T14:20:16.472Z,1510150816.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:16.847Z,1510150816.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:16.879Z,1510150816.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T14:20:16.885Z,1510150816.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:17.252Z,1510150817.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:17.287Z,1510150817.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T14:20:17.288Z,1510150817.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:17.675Z,1510150817.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:17.690Z,1510150817.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T14:20:17.691Z,1510150817.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:18.069Z,1510150818.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:18.085Z,1510150818.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T14:20:18.086Z,1510150818.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:18.750Z,1510150818.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:18.778Z,1510150818.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T14:20:18.779Z,1510150818.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:18.891Z,1510150818.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:18.907Z,1510150818.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T14:20:18.908Z,1510150818.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:19.312Z,1510150819.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:19.343Z,1510150819.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2017-11-08T14:20:19.345Z,1510150819.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:19.707Z,1510150819.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:19.732Z,1510150819.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2017-11-08T14:20:19.733Z,1510150819.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:20.106Z,1510150820.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:20.135Z,1510150820.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2017-11-08T14:20:20.136Z,1510150820.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:20.500Z,1510150820.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:20.536Z,1510150820.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-08T14:20:20.537Z,1510150820.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:20.896Z,1510150820.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:20.935Z,1510150820.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-08T14:20:20.936Z,1510150820.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:21.320Z,1510150821.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:21.327Z,1510150821.327 [PNI_TCM](ERROR): CRC does not match. Expected:0x47513 got:0x6463
2017-11-08T14:20:21.355Z,1510150821.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-08T14:20:21.356Z,1510150821.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:21.698Z,1510150821.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:21.725Z,1510150821.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-11-08T14:20:21.726Z,1510150821.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:22.099Z,1510150822.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:22.139Z,1510150822.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-08T14:20:22.140Z,1510150822.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:22.512Z,1510150822.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:22.542Z,1510150822.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-08T14:20:22.543Z,1510150822.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:23.194Z,1510150823.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:23.210Z,1510150823.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T14:20:23.211Z,1510150823.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:23.341Z,1510150823.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:23.363Z,1510150823.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-08T14:20:23.364Z,1510150823.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:23.742Z,1510150823.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:23.813Z,1510150823.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-08T14:20:23.814Z,1510150823.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:24.149Z,1510150824.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:24.167Z,1510150824.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-08T14:20:24.168Z,1510150824.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:24.542Z,1510150824.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:24.563Z,1510150824.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-08T14:20:24.564Z,1510150824.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:24.935Z,1510150824.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:24.955Z,1510150824.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:25.338Z,1510150825.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:25.396Z,1510150825.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:25.740Z,1510150825.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:25.764Z,1510150825.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:26.138Z,1510150826.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:26.155Z,1510150826.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:26.557Z,1510150826.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:26.600Z,1510150826.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:26.946Z,1510150826.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:26.962Z,1510150826.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:27.628Z,1510150827.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:27.669Z,1510150827.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:27.807Z,1510150827.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:27.839Z,1510150827.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:28.222Z,1510150828.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:28.254Z,1510150828.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:28.617Z,1510150828.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:28.647Z,1510150828.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:29.017Z,1510150829.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:29.042Z,1510150829.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:29.407Z,1510150829.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:29.424Z,1510150829.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:29.808Z,1510150829.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:29.852Z,1510150829.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:30.237Z,1510150830.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:30.253Z,1510150830.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:30.607Z,1510150830.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:30.623Z,1510150830.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:31.021Z,1510150831.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:31.049Z,1510150831.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:31.691Z,1510150831.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:31.712Z,1510150831.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:31.823Z,1510150831.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:31.875Z,1510150831.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:32.239Z,1510150832.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:32.255Z,1510150832.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:32.640Z,1510150832.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:32.656Z,1510150832.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:33.043Z,1510150833.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:33.067Z,1510150833.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:33.423Z,1510150833.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:33.447Z,1510150833.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:33.820Z,1510150833.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:33.853Z,1510150833.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:34.254Z,1510150834.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:34.271Z,1510150834.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:34.643Z,1510150834.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:34.663Z,1510150834.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:35.300Z,1510150835.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:35.319Z,1510150835.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:35.431Z,1510150835.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:35.468Z,1510150835.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:35.848Z,1510150835.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:35.907Z,1510150835.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:36.252Z,1510150836.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:36.269Z,1510150836.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:36.651Z,1510150836.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:36.675Z,1510150836.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:37.031Z,1510150837.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:37.055Z,1510150837.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:37.431Z,1510150837.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:37.457Z,1510150837.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:37.832Z,1510150837.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:37.860Z,1510150837.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:38.254Z,1510150838.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:38.270Z,1510150838.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:38.631Z,1510150838.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:38.657Z,1510150838.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:39.052Z,1510150839.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:39.068Z,1510150839.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:39.714Z,1510150839.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:39.730Z,1510150839.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:39.861Z,1510150839.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:39.912Z,1510150839.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:40.282Z,1510150840.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:40.311Z,1510150840.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:40.681Z,1510150840.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:40.706Z,1510150840.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:41.077Z,1510150841.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:41.104Z,1510150841.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:41.467Z,1510150841.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:41.504Z,1510150841.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:41.868Z,1510150841.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:41.911Z,1510150841.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:42.299Z,1510150842.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:42.320Z,1510150842.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:42.681Z,1510150842.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:42.708Z,1510150842.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:43.358Z,1510150843.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:43.374Z,1510150843.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:43.477Z,1510150843.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:43.523Z,1510150843.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:43.903Z,1510150843.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:43.920Z,1510150843.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:44.303Z,1510150844.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:44.323Z,1510150844.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:44.703Z,1510150844.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:44.720Z,1510150844.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:45.084Z,1510150845.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:45.112Z,1510150845.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:45.483Z,1510150845.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:45.518Z,1510150845.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:45.885Z,1510150845.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:45.915Z,1510150845.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:46.315Z,1510150846.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:46.385Z,1510150846.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:46.683Z,1510150846.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:46.715Z,1510150846.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:47.105Z,1510150847.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:47.121Z,1510150847.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:47.783Z,1510150847.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:47.839Z,1510150847.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:47.977Z,1510150847.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:48.022Z,1510150848.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:48.404Z,1510150848.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:48.420Z,1510150848.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:48.800Z,1510150848.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:48.856Z,1510150848.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:49.189Z,1510150849.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:49.222Z,1510150849.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:49.583Z,1510150849.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:49.624Z,1510150849.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:49.980Z,1510150849.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:50.009Z,1510150850.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:50.407Z,1510150850.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:50.423Z,1510150850.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:50.805Z,1510150850.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:50.827Z,1510150850.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:51.478Z,1510150851.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:51.493Z,1510150851.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:51.625Z,1510150851.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:51.668Z,1510150851.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:52.053Z,1510150852.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:52.069Z,1510150852.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:52.441Z,1510150852.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:52.477Z,1510150852.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:52.841Z,1510150852.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:52.868Z,1510150852.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:53.228Z,1510150853.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:53.268Z,1510150853.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:53.631Z,1510150853.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:53.664Z,1510150853.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:54.028Z,1510150854.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:54.044Z,1510150854.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:54.464Z,1510150854.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:54.480Z,1510150854.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:54.827Z,1510150854.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:54.848Z,1510150854.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:55.245Z,1510150855.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:55.274Z,1510150855.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:55.958Z,1510150855.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:55.983Z,1510150855.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:56.093Z,1510150856.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:56.139Z,1510150856.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:56.514Z,1510150856.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:56.536Z,1510150856.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:56.917Z,1510150856.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:56.932Z,1510150856.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:57.320Z,1510150857.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:57.336Z,1510150857.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:57.699Z,1510150857.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:57.771Z,1510150857.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:58.098Z,1510150858.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:58.135Z,1510150858.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:58.527Z,1510150858.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:58.547Z,1510150858.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:58.919Z,1510150858.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:58.936Z,1510150858.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:59.586Z,1510150859.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:59.602Z,1510150859.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:20:59.730Z,1510150859.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:20:59.746Z,1510150859.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:00.134Z,1510150860.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:00.150Z,1510150860.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:00.533Z,1510150860.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:00.549Z,1510150860.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:00.942Z,1510150860.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:00.958Z,1510150860.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:01.332Z,1510150861.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:01.348Z,1510150861.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:01.726Z,1510150861.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:01.747Z,1510150861.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:02.130Z,1510150862.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:02.146Z,1510150862.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:02.549Z,1510150862.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:02.579Z,1510150862.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:02.932Z,1510150862.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:02.948Z,1510150862.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:03.337Z,1510150863.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:03.359Z,1510150863.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:04.009Z,1510150864.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:04.031Z,1510150864.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:04.151Z,1510150864.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:04.189Z,1510150864.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:04.572Z,1510150864.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:04.589Z,1510150864.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:04.972Z,1510150864.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:04.995Z,1510150864.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:05.369Z,1510150865.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:05.385Z,1510150865.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:05.751Z,1510150865.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:05.783Z,1510150865.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:06.152Z,1510150866.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:06.182Z,1510150866.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:06.580Z,1510150866.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:06.597Z,1510150866.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:06.971Z,1510150866.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:06.988Z,1510150866.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:07.638Z,1510150867.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:07.653Z,1510150867.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:07.788Z,1510150867.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:07.805Z,1510150867.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:08.202Z,1510150868.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:08.234Z,1510150868.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:08.601Z,1510150868.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:08.656Z,1510150868.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:09.001Z,1510150869.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:09.034Z,1510150869.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:09.391Z,1510150869.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:09.412Z,1510150869.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:09.791Z,1510150869.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:09.855Z,1510150869.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:10.209Z,1510150870.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:10.233Z,1510150870.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:10.591Z,1510150870.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:10.612Z,1510150870.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:10.991Z,1510150870.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:11.039Z,1510150871.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:11.401Z,1510150871.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:11.433Z,1510150871.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:12.083Z,1510150872.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:12.143Z,1510150872.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:12.252Z,1510150872.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:12.277Z,1510150872.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:12.669Z,1510150872.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:12.718Z,1510150872.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:13.070Z,1510150873.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:13.100Z,1510150873.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:13.465Z,1510150873.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:13.498Z,1510150873.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:13.859Z,1510150873.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:13.896Z,1510150873.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:14.259Z,1510150874.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:14.292Z,1510150874.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:14.655Z,1510150874.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:14.676Z,1510150874.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:15.060Z,1510150875.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:15.076Z,1510150875.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:15.488Z,1510150875.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:15.504Z,1510150875.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:15.873Z,1510150875.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:15.900Z,1510150875.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:16.547Z,1510150876.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:16.567Z,1510150876.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:16.679Z,1510150876.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:16.727Z,1510150876.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:17.096Z,1510150877.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:17.112Z,1510150877.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:17.496Z,1510150877.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:17.511Z,1510150877.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:17.896Z,1510150877.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:17.912Z,1510150877.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:18.279Z,1510150878.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:18.314Z,1510150878.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:18.675Z,1510150878.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:18.700Z,1510150878.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:19.088Z,1510150879.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:19.104Z,1510150879.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:19.502Z,1510150879.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:19.523Z,1510150879.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:19.875Z,1510150879.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:19.901Z,1510150879.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:20.299Z,1510150880.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:20.352Z,1510150880.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:20.974Z,1510150880.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:20.995Z,1510150880.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:21.110Z,1510150881.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:21.163Z,1510150881.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:21.530Z,1510150881.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:21.562Z,1510150881.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:21.925Z,1510150881.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:21.952Z,1510150881.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:22.325Z,1510150882.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:22.359Z,1510150882.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:22.715Z,1510150882.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:22.755Z,1510150882.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:23.116Z,1510150883.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:23.153Z,1510150883.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:23.544Z,1510150883.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:23.560Z,1510150883.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:23.929Z,1510150883.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:23.960Z,1510150883.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:24.600Z,1510150884.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:24.616Z,1510150884.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:24.717Z,1510150884.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:24.766Z,1510150884.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:25.142Z,1510150885.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:25.163Z,1510150885.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:25.543Z,1510150885.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:25.559Z,1510150885.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:25.941Z,1510150885.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:25.957Z,1510150885.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:26.324Z,1510150886.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:26.352Z,1510150886.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:26.719Z,1510150886.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:26.735Z,1510150886.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:27.124Z,1510150887.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:27.157Z,1510150887.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:27.556Z,1510150887.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:27.572Z,1510150887.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:27.927Z,1510150887.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:27.968Z,1510150887.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:28.337Z,1510150888.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:28.366Z,1510150888.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:29.018Z,1510150889.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:29.034Z,1510150889.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:29.166Z,1510150889.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:29.205Z,1510150889.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:29.570Z,1510150889.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:29.591Z,1510150889.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:29.970Z,1510150889.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:29.986Z,1510150889.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:30.366Z,1510150890.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:30.388Z,1510150890.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:30.759Z,1510150890.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:30.822Z,1510150890.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:31.162Z,1510150891.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:31.179Z,1510150891.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:31.577Z,1510150891.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:31.594Z,1510150891.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:31.969Z,1510150891.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:32.038Z,1510150892.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:32.653Z,1510150892.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:32.669Z,1510150892.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:32.774Z,1510150892.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:32.822Z,1510150892.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:33.193Z,1510150893.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:33.256Z,1510150893.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:33.593Z,1510150893.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:33.623Z,1510150893.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:33.985Z,1510150893.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:34.031Z,1510150894.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:34.380Z,1510150894.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:34.395Z,1510150894.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:34.779Z,1510150894.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:34.816Z,1510150894.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:35.179Z,1510150895.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:35.195Z,1510150895.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:35.612Z,1510150895.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:35.628Z,1510150895.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:35.975Z,1510150895.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:35.996Z,1510150895.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:36.389Z,1510150896.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:36.417Z,1510150896.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:37.164Z,1510150897.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:37.180Z,1510150897.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:37.290Z,1510150897.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:37.322Z,1510150897.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:37.708Z,1510150897.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:37.740Z,1510150897.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:38.103Z,1510150898.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:38.128Z,1510150898.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:38.506Z,1510150898.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:38.536Z,1510150898.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:38.893Z,1510150898.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:38.925Z,1510150898.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:39.291Z,1510150899.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:39.330Z,1510150899.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:39.693Z,1510150899.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:39.711Z,1510150899.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:40.098Z,1510150900.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:40.115Z,1510150900.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:40.523Z,1510150900.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:40.539Z,1510150900.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:40.907Z,1510150900.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:40.937Z,1510150900.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:41.583Z,1510150901.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:41.599Z,1510150901.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:41.709Z,1510150901.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:41.741Z,1510150901.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:42.131Z,1510150902.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:42.187Z,1510150902.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:42.522Z,1510150902.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:42.555Z,1510150902.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:42.932Z,1510150902.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:42.949Z,1510150902.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:43.315Z,1510150903.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:43.345Z,1510150903.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:43.708Z,1510150903.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:43.748Z,1510150903.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:44.111Z,1510150904.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:44.164Z,1510150904.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:44.534Z,1510150904.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:44.696Z,1510150904.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:44.911Z,1510150904.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:44.966Z,1510150904.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:45.323Z,1510150905.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:45.339Z,1510150905.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:46.008Z,1510150906.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:46.031Z,1510150906.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:46.133Z,1510150906.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:46.149Z,1510150906.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:46.553Z,1510150906.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:46.580Z,1510150906.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:46.953Z,1510150906.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:46.984Z,1510150906.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:47.349Z,1510150907.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:47.376Z,1510150907.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:47.739Z,1510150907.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:47.755Z,1510150907.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:48.140Z,1510150908.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:48.180Z,1510150908.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:48.578Z,1510150908.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:48.595Z,1510150908.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:48.952Z,1510150908.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:48.987Z,1510150908.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:49.634Z,1510150909.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:49.650Z,1510150909.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:49.745Z,1510150909.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:49.770Z,1510150909.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:50.174Z,1510150910.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:50.190Z,1510150910.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:50.573Z,1510150910.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:50.589Z,1510150910.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:50.961Z,1510150910.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:50.988Z,1510150910.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:51.351Z,1510150911.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:51.379Z,1510150911.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:51.752Z,1510150911.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:51.768Z,1510150911.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:52.152Z,1510150912.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:52.168Z,1510150912.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:52.589Z,1510150912.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:52.611Z,1510150912.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:52.951Z,1510150912.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:53.001Z,1510150913.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:53.365Z,1510150913.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:53.394Z,1510150913.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:54.070Z,1510150914.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:54.150Z,1510150914.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:54.263Z,1510150914.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:54.307Z,1510150914.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:54.674Z,1510150914.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:54.701Z,1510150914.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:55.077Z,1510150915.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:55.128Z,1510150915.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:55.478Z,1510150915.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:55.508Z,1510150915.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:55.867Z,1510150915.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:55.919Z,1510150915.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:56.259Z,1510150916.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:56.275Z,1510150916.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:56.663Z,1510150916.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:56.700Z,1510150916.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:57.064Z,1510150917.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:57.080Z,1510150917.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:57.493Z,1510150917.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:57.509Z,1510150917.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:57.877Z,1510150917.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:57.905Z,1510150917.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:58.554Z,1510150918.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:58.570Z,1510150918.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:58.673Z,1510150918.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:58.715Z,1510150918.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:59.100Z,1510150919.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:59.116Z,1510150919.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:59.495Z,1510150919.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:59.515Z,1510150919.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:21:59.896Z,1510150919.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:21:59.912Z,1510150919.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:00.279Z,1510150920.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:00.304Z,1510150920.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:00.679Z,1510150920.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:00.703Z,1510150920.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:01.076Z,1510150921.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:01.111Z,1510150921.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:01.506Z,1510150921.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:01.527Z,1510150921.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:01.879Z,1510150921.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:01.907Z,1510150921.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:02.300Z,1510150922.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:02.317Z,1510150922.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:02.974Z,1510150922.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:03.003Z,1510150923.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:03.114Z,1510150923.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:03.163Z,1510150923.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:03.541Z,1510150923.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:03.557Z,1510150923.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:03.943Z,1510150923.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:04.001Z,1510150924.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:04.329Z,1510150924.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:04.354Z,1510150924.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:04.723Z,1510150924.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:04.753Z,1510150924.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:05.125Z,1510150925.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:05.153Z,1510150925.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:05.547Z,1510150925.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:05.563Z,1510150925.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:05.944Z,1510150925.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:05.967Z,1510150925.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:06.613Z,1510150926.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:06.629Z,1510150926.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:06.761Z,1510150926.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:06.807Z,1510150926.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:07.181Z,1510150927.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:07.208Z,1510150927.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:07.581Z,1510150927.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:07.611Z,1510150927.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:07.973Z,1510150927.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:08.002Z,1510150928.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:08.367Z,1510150928.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:08.383Z,1510150928.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:08.768Z,1510150928.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:08.784Z,1510150928.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:09.164Z,1510150929.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:09.180Z,1510150929.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:09.597Z,1510150929.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:09.619Z,1510150929.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:09.967Z,1510150929.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:09.988Z,1510150929.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:10.385Z,1510150930.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:10.413Z,1510150930.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:11.062Z,1510150931.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:11.084Z,1510150931.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:11.223Z,1510150931.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:11.263Z,1510150931.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:11.630Z,1510150931.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:11.669Z,1510150931.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:12.025Z,1510150932.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:12.060Z,1510150932.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:12.426Z,1510150932.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:12.462Z,1510150932.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:12.819Z,1510150932.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:12.839Z,1510150932.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:13.237Z,1510150933.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:13.268Z,1510150933.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:13.630Z,1510150933.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:13.665Z,1510150933.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:14.311Z,1510150934.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:14.376Z,1510150934.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:14.483Z,1510150934.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:14.523Z,1510150934.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:14.906Z,1510150934.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:14.923Z,1510150934.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:15.295Z,1510150935.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:15.327Z,1510150935.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:15.704Z,1510150935.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:15.768Z,1510150935.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:16.083Z,1510150936.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:16.127Z,1510150936.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:16.483Z,1510150936.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:16.518Z,1510150936.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:16.879Z,1510150936.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:16.935Z,1510150936.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:17.286Z,1510150937.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:17.321Z,1510150937.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:17.714Z,1510150937.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:17.769Z,1510150937.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:18.095Z,1510150938.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:18.129Z,1510150938.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:18.782Z,1510150938.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:18.798Z,1510150938.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:18.934Z,1510150938.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:18.950Z,1510150938.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:19.349Z,1510150939.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:19.374Z,1510150939.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:19.741Z,1510150939.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:19.773Z,1510150939.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:20.138Z,1510150940.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:20.170Z,1510150940.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:20.530Z,1510150940.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:20.545Z,1510150940.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:20.936Z,1510150940.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:20.980Z,1510150940.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:21.353Z,1510150941.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:21.377Z,1510150941.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:21.741Z,1510150941.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:21.777Z,1510150941.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:22.413Z,1510150942.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:22.428Z,1510150942.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:22.541Z,1510150942.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:22.565Z,1510150942.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:22.957Z,1510150942.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:22.994Z,1510150942.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:23.357Z,1510150943.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:23.385Z,1510150943.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:23.761Z,1510150943.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:23.788Z,1510150943.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:24.144Z,1510150944.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:24.221Z,1510150944.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:24.544Z,1510150944.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:24.649Z,1510150944.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:24.945Z,1510150944.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:25.059Z,1510150945.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:25.374Z,1510150945.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:25.412Z,1510150945.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:25.757Z,1510150945.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:25.811Z,1510150945.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:26.166Z,1510150946.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:26.183Z,1510150946.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:26.838Z,1510150946.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:26.860Z,1510150946.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:26.980Z,1510150946.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:27.016Z,1510150947.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:27.390Z,1510150947.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:27.420Z,1510150947.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:27.793Z,1510150947.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:27.819Z,1510150947.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:28.194Z,1510150948.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:28.226Z,1510150948.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:28.580Z,1510150948.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:28.596Z,1510150948.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:28.980Z,1510150948.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:28.996Z,1510150948.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:29.409Z,1510150949.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:29.425Z,1510150949.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:29.793Z,1510150949.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:29.827Z,1510150949.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:30.633Z,1510150950.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:30.669Z,1510150950.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:30.787Z,1510150950.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:30.863Z,1510150950.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:31.199Z,1510150951.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:31.232Z,1510150951.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:31.610Z,1510150951.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:31.627Z,1510150951.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:31.999Z,1510150951.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:32.035Z,1510150952.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:32.387Z,1510150952.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:32.429Z,1510150952.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:32.788Z,1510150952.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:32.825Z,1510150952.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:33.217Z,1510150953.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:33.235Z,1510150953.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:33.587Z,1510150953.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:33.604Z,1510150953.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:34.001Z,1510150954.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:34.036Z,1510150954.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:34.675Z,1510150954.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:34.691Z,1510150954.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:34.803Z,1510150954.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:34.852Z,1510150954.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:35.230Z,1510150955.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:35.266Z,1510150955.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:35.624Z,1510150955.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:35.644Z,1510150955.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:36.019Z,1510150956.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:36.036Z,1510150956.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:36.399Z,1510150956.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:36.434Z,1510150956.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:36.805Z,1510150956.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:36.830Z,1510150956.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:37.230Z,1510150957.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:37.248Z,1510150957.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:37.624Z,1510150957.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:37.648Z,1510150957.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:38.293Z,1510150958.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:38.345Z,1510150958.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:38.451Z,1510150958.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:38.502Z,1510150958.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:38.872Z,1510150958.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:38.931Z,1510150958.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:39.272Z,1510150959.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:39.293Z,1510150959.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:39.667Z,1510150959.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:39.731Z,1510150959.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:40.051Z,1510150960.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:40.076Z,1510150960.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:40.447Z,1510150960.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:40.478Z,1510150960.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:40.851Z,1510150960.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:40.880Z,1510150960.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:41.251Z,1510150961.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:41.280Z,1510150961.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:41.678Z,1510150961.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:41.695Z,1510150961.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:42.072Z,1510150962.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:42.088Z,1510150962.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:42.742Z,1510150962.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:42.773Z,1510150962.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:42.886Z,1510150962.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:42.904Z,1510150962.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:43.303Z,1510150963.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:43.332Z,1510150963.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:43.707Z,1510150963.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:43.734Z,1510150963.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:44.103Z,1510150964.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:44.132Z,1510150964.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:44.497Z,1510150964.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:44.513Z,1510150964.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:44.891Z,1510150964.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:44.940Z,1510150964.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:45.318Z,1510150965.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:45.341Z,1510150965.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:45.696Z,1510150965.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:45.719Z,1510150965.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:46.097Z,1510150966.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:46.112Z,1510150966.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:46.502Z,1510150966.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:46.521Z,1510150966.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:47.214Z,1510150967.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:47.242Z,1510150967.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:47.330Z,1510150967.330 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T14:22:47.354Z,1510150967.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:47.371Z,1510150967.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:47.775Z,1510150967.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:47.834Z,1510150967.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:48.174Z,1510150968.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:48.201Z,1510150968.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:48.574Z,1510150968.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:48.603Z,1510150968.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:48.959Z,1510150968.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:48.997Z,1510150968.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:49.359Z,1510150969.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:49.376Z,1510150969.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:49.759Z,1510150969.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:49.776Z,1510150969.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:50.164Z,1510150970.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:50.181Z,1510150970.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:50.586Z,1510150970.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:50.611Z,1510150970.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:50.970Z,1510150970.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:50.986Z,1510150970.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:51.652Z,1510150971.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:51.668Z,1510150971.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:51.777Z,1510150971.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:51.805Z,1510150971.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:52.208Z,1510150972.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:52.236Z,1510150972.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:52.593Z,1510150972.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:52.627Z,1510150972.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:52.989Z,1510150972.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:53.022Z,1510150973.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:53.384Z,1510150973.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:53.399Z,1510150973.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:53.783Z,1510150973.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:53.800Z,1510150973.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:54.185Z,1510150974.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:54.201Z,1510150974.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:54.609Z,1510150974.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:54.636Z,1510150974.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:54.987Z,1510150974.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:55.004Z,1510150975.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:55.397Z,1510150975.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:55.430Z,1510150975.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:56.079Z,1510150976.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:56.095Z,1510150976.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:56.212Z,1510150976.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:56.242Z,1510150976.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:56.628Z,1510150976.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:56.645Z,1510150976.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:57.028Z,1510150977.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:57.051Z,1510150977.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:57.428Z,1510150977.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:57.445Z,1510150977.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:57.812Z,1510150977.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:57.852Z,1510150977.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:58.239Z,1510150978.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:58.259Z,1510150978.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:58.629Z,1510150978.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:58.652Z,1510150978.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:59.342Z,1510150979.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:59.358Z,1510150979.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:59.467Z,1510150979.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:59.578Z,1510150979.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:22:59.888Z,1510150979.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:22:59.905Z,1510150979.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:00.281Z,1510150980.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:00.311Z,1510150980.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:00.689Z,1510150980.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:00.747Z,1510150980.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:01.067Z,1510150981.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:01.096Z,1510150981.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:01.467Z,1510150981.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:01.512Z,1510150981.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:01.868Z,1510150981.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:01.900Z,1510150981.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:02.300Z,1510150982.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:02.316Z,1510150982.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:02.667Z,1510150982.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:02.682Z,1510150982.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:03.077Z,1510150983.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:03.110Z,1510150983.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:03.762Z,1510150983.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:03.784Z,1510150983.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:03.913Z,1510150983.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:03.956Z,1510150983.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:04.326Z,1510150984.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:04.354Z,1510150984.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:04.722Z,1510150984.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:04.738Z,1510150984.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:05.118Z,1510150985.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:05.135Z,1510150985.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:05.514Z,1510150985.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:05.530Z,1510150985.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:05.914Z,1510150985.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:05.930Z,1510150985.930 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:05.931Z,1510150985.931 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2017-11-08T14:23:05.931Z,1510150985.931 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T14:23:05.932Z,1510150985.932 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:05.933Z,1510150985.933 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2017-11-08T14:23:05.933Z,1510150985.933 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T14:23:05.934Z,1510150985.934 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:05.934Z,1510150985.934 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2017-11-08T14:23:05.935Z,1510150985.935 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T14:23:06.009Z,1510150986.009 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T14:23:06.009Z,1510150986.009 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T14:23:06.010Z,1510150986.010 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T14:23:06.329Z,1510150986.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:06.433Z,1510150986.433 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T14:23:06.433Z,1510150986.433 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2017-11-08T14:23:06.433Z,1510150986.433 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T14:23:06.433Z,1510150986.433 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2017-11-08T14:23:06.434Z,1510150986.434 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T14:23:06.434Z,1510150986.434 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2017-11-08T14:23:06.725Z,1510150986.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:06.746Z,1510150986.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T14:23:06.747Z,1510150986.747 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:23:06.747Z,1510150986.747 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:23:06.747Z,1510150986.747 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T14:23:06.748Z,1510150986.748 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:23:06.748Z,1510150986.748 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:23:06.749Z,1510150986.749 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T14:23:06.749Z,1510150986.749 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:23:06.750Z,1510150986.750 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:23:07.402Z,1510150987.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:07.422Z,1510150987.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s.
2017-11-08T14:23:07.423Z,1510150987.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:07.537Z,1510150987.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:07.587Z,1510150987.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2017-11-08T14:23:07.588Z,1510150987.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:07.966Z,1510150987.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:07.981Z,1510150987.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2017-11-08T14:23:07.982Z,1510150987.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:08.364Z,1510150988.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:08.380Z,1510150988.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2017-11-08T14:23:08.381Z,1510150988.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:08.749Z,1510150988.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:08.776Z,1510150988.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T14:23:08.777Z,1510150988.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:09.143Z,1510150989.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:09.178Z,1510150989.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T14:23:09.178Z,1510150989.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:09.539Z,1510150989.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:09.594Z,1510150989.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2017-11-08T14:23:09.595Z,1510150989.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:09.940Z,1510150989.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:09.956Z,1510150989.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T14:23:09.973Z,1510150989.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:10.376Z,1510150990.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:10.392Z,1510150990.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-08T14:23:10.393Z,1510150990.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:10.739Z,1510150990.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:10.759Z,1510150990.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T14:23:10.760Z,1510150990.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:11.153Z,1510150991.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:11.189Z,1510150991.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-08T14:23:11.190Z,1510150991.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:11.835Z,1510150991.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:11.855Z,1510150991.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2017-11-08T14:23:11.856Z,1510150991.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:11.953Z,1510150991.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:11.998Z,1510150991.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-08T14:23:11.999Z,1510150991.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:12.376Z,1510150992.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:12.392Z,1510150992.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-08T14:23:12.393Z,1510150992.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:12.777Z,1510150992.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:12.792Z,1510150992.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T14:23:12.793Z,1510150992.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:13.176Z,1510150993.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:13.192Z,1510150993.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-08T14:23:13.193Z,1510150993.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:13.559Z,1510150993.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:13.594Z,1510150993.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T14:23:13.595Z,1510150993.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:13.956Z,1510150993.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:13.991Z,1510150993.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T14:23:13.992Z,1510150993.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:14.387Z,1510150994.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:14.407Z,1510150994.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T14:23:14.408Z,1510150994.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:14.779Z,1510150994.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:14.795Z,1510150994.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T14:23:14.796Z,1510150994.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:15.486Z,1510150995.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:15.502Z,1510150995.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T14:23:15.503Z,1510150995.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:15.601Z,1510150995.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:15.651Z,1510150995.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T14:23:15.653Z,1510150995.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:16.018Z,1510150996.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:16.050Z,1510150996.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T14:23:16.051Z,1510150996.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:16.429Z,1510150996.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:16.444Z,1510150996.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T14:23:16.445Z,1510150996.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:16.826Z,1510150996.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:16.847Z,1510150996.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T14:23:16.848Z,1510150996.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:17.207Z,1510150997.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:17.235Z,1510150997.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T14:23:17.236Z,1510150997.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:17.603Z,1510150997.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:17.619Z,1510150997.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T14:23:17.620Z,1510150997.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:18.004Z,1510150998.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:18.020Z,1510150998.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T14:23:18.021Z,1510150998.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:18.440Z,1510150998.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:18.456Z,1510150998.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T14:23:18.457Z,1510150998.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:18.811Z,1510150998.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:18.827Z,1510150998.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T14:23:18.828Z,1510150998.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:19.225Z,1510150999.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:19.252Z,1510150999.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T14:23:19.253Z,1510150999.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:19.906Z,1510150999.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:19.922Z,1510150999.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T14:23:19.922Z,1510150999.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:20.057Z,1510151000.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:20.098Z,1510151000.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2017-11-08T14:23:20.100Z,1510151000.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:20.458Z,1510151000.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:20.474Z,1510151000.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T14:23:20.475Z,1510151000.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:20.861Z,1510151000.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:20.908Z,1510151000.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2017-11-08T14:23:20.909Z,1510151000.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:21.262Z,1510151001.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:21.282Z,1510151001.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2017-11-08T14:23:21.283Z,1510151001.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:21.653Z,1510151001.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:21.739Z,1510151001.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-08T14:23:21.740Z,1510151001.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:22.054Z,1510151002.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:22.070Z,1510151002.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T14:23:22.070Z,1510151002.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:22.473Z,1510151002.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:22.523Z,1510151002.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-08T14:23:22.524Z,1510151002.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:22.861Z,1510151002.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:22.881Z,1510151002.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-11-08T14:23:22.882Z,1510151002.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:23.533Z,1510151003.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:23.580Z,1510151003.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T14:23:23.581Z,1510151003.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:23.722Z,1510151003.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:23.754Z,1510151003.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-08T14:23:23.755Z,1510151003.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:24.130Z,1510151004.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:24.161Z,1510151004.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-08T14:23:24.162Z,1510151004.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:24.525Z,1510151004.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:24.562Z,1510151004.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-08T14:23:24.563Z,1510151004.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:24.926Z,1510151004.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:24.962Z,1510151004.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-08T14:23:24.963Z,1510151004.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:25.317Z,1510151005.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:25.333Z,1510151005.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-08T14:23:25.334Z,1510151005.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:25.714Z,1510151005.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:25.741Z,1510151005.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-08T14:23:25.742Z,1510151005.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:26.115Z,1510151006.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:26.132Z,1510151006.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:26.537Z,1510151006.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:26.568Z,1510151006.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:26.918Z,1510151006.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:26.934Z,1510151006.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:27.321Z,1510151007.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:27.338Z,1510151007.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:28.008Z,1510151008.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:28.024Z,1510151008.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:28.134Z,1510151008.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:28.159Z,1510151008.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:28.561Z,1510151008.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:28.578Z,1510151008.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:28.960Z,1510151008.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:28.977Z,1510151008.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:29.345Z,1510151009.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:29.385Z,1510151009.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:29.739Z,1510151009.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:29.755Z,1510151009.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:30.140Z,1510151010.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:30.183Z,1510151010.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:30.561Z,1510151010.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:30.586Z,1510151010.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:30.953Z,1510151010.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:30.985Z,1510151010.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:31.624Z,1510151011.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:31.683Z,1510151011.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:31.799Z,1510151011.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:31.828Z,1510151011.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:32.214Z,1510151012.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:32.240Z,1510151012.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:32.614Z,1510151012.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:32.652Z,1510151012.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:33.010Z,1510151013.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:33.036Z,1510151013.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:33.399Z,1510151013.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:33.415Z,1510151013.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:33.800Z,1510151013.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:33.817Z,1510151013.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:34.221Z,1510151014.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:34.247Z,1510151014.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:34.600Z,1510151014.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:34.628Z,1510151014.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:34.998Z,1510151014.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:35.018Z,1510151015.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:35.415Z,1510151015.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:35.431Z,1510151015.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:36.089Z,1510151016.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:36.119Z,1510151016.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:36.225Z,1510151016.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:36.257Z,1510151016.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:36.652Z,1510151016.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:36.669Z,1510151016.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:37.053Z,1510151017.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:37.069Z,1510151017.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:37.452Z,1510151017.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:37.468Z,1510151017.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:37.835Z,1510151017.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:37.866Z,1510151017.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:38.231Z,1510151018.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:38.267Z,1510151018.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:38.631Z,1510151018.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:38.665Z,1510151018.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:39.036Z,1510151019.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:39.066Z,1510151019.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:39.467Z,1510151019.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:39.483Z,1510151019.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:39.853Z,1510151019.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:39.875Z,1510151019.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:40.529Z,1510151020.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:40.561Z,1510151020.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:40.679Z,1510151020.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:40.723Z,1510151020.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:41.094Z,1510151021.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:41.127Z,1510151021.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:41.493Z,1510151021.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:41.526Z,1510151021.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:41.889Z,1510151021.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:41.918Z,1510151021.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:42.280Z,1510151022.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:42.296Z,1510151022.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:42.385Z,1510151022.385 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:23:42.385Z,1510151022.385 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T14:23:42.679Z,1510151022.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:42.695Z,1510151022.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:42.778Z,1510151022.778 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:23:42.780Z,1510151022.780 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:23:42.780Z,1510151022.780 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:23:42.780Z,1510151022.780 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T14:23:42.780Z,1510151022.780 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:23:42.809Z,1510151022.809 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:23:43.080Z,1510151023.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:43.096Z,1510151023.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:43.185Z,1510151023.185 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:23:43.291Z,1510151023.291 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:23:43.511Z,1510151023.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:43.524Z,1510151023.524 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-08T14:23:43.524Z,1510151023.524 [BPC1] Data Fault, FailCount= 1
2017-11-08T14:23:43.525Z,1510151023.525 [BPC1](ERROR): Data Fault
2017-11-08T14:23:43.541Z,1510151023.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:43.646Z,1510151023.646 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T14:23:43.882Z,1510151023.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:43.899Z,1510151023.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:44.289Z,1510151024.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:44.314Z,1510151024.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:44.978Z,1510151024.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:44.000Z,1510151025.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:45.104Z,1510151025.104 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:23:45.105Z,1510151025.105 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T14:23:45.105Z,1510151025.105 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T14:23:45.105Z,1510151025.105 [BPC1] No Fault, FailCount= 1
2017-11-08T14:23:45.152Z,1510151025.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:45.243Z,1510151025.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:45.310Z,1510151025.310 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:23:45.311Z,1510151025.311 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:23:45.311Z,1510151025.311 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:23:45.311Z,1510151025.311 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T14:23:45.311Z,1510151025.311 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:23:45.317Z,1510151025.317 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:23:45.550Z,1510151025.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:45.579Z,1510151025.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:45.713Z,1510151025.713 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:23:45.799Z,1510151025.799 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:23:45.951Z,1510151025.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:45.975Z,1510151025.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:46.350Z,1510151026.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:46.380Z,1510151026.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:46.736Z,1510151026.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:46.761Z,1510151026.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:47.134Z,1510151027.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:47.151Z,1510151027.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:47.237Z,1510151027.237 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:23:47.237Z,1510151027.237 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T14:23:47.413Z,1510151027.413 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:23:47.413Z,1510151027.413 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:23:47.413Z,1510151027.413 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:23:47.413Z,1510151027.413 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T14:23:47.413Z,1510151027.413 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:23:47.553Z,1510151027.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:47.579Z,1510151027.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:47.661Z,1510151027.661 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:23:47.817Z,1510151027.817 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:23:47.902Z,1510151027.902 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:23:47.962Z,1510151027.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:47.995Z,1510151027.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:48.632Z,1510151028.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:48.649Z,1510151028.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:48.761Z,1510151028.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:48.803Z,1510151028.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:49.188Z,1510151029.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:49.208Z,1510151029.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:49.282Z,1510151029.282 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:23:49.282Z,1510151029.282 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T14:23:49.517Z,1510151029.517 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:23:49.517Z,1510151029.517 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:23:49.517Z,1510151029.517 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:23:49.517Z,1510151029.517 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T14:23:49.517Z,1510151029.517 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:23:49.586Z,1510151029.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:49.607Z,1510151029.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:49.688Z,1510151029.688 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:23:49.922Z,1510151029.922 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:23:49.995Z,1510151029.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:50.030Z,1510151030.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:50.128Z,1510151030.128 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:23:50.372Z,1510151030.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:50.398Z,1510151030.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:50.767Z,1510151030.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:50.803Z,1510151030.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:51.168Z,1510151031.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:51.198Z,1510151031.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:51.599Z,1510151031.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:51.615Z,1510151031.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:51.689Z,1510151031.689 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:23:51.689Z,1510151031.689 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T14:23:51.745Z,1510151031.745 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:23:51.745Z,1510151031.745 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:23:51.745Z,1510151031.745 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:23:51.745Z,1510151031.745 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T14:23:51.746Z,1510151031.746 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:23:51.963Z,1510151031.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:51.998Z,1510151031.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:52.082Z,1510151032.082 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:23:52.082Z,1510151032.082 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:23:52.149Z,1510151032.149 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:23:52.231Z,1510151032.231 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:23:52.389Z,1510151032.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:52.407Z,1510151032.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:53.062Z,1510151033.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:53.094Z,1510151033.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:53.206Z,1510151033.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:53.264Z,1510151033.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:53.626Z,1510151033.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:53.660Z,1510151033.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:54.021Z,1510151034.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:54.055Z,1510151034.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:54.426Z,1510151034.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:54.453Z,1510151034.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:54.811Z,1510151034.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:54.848Z,1510151034.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:55.208Z,1510151035.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:55.225Z,1510151035.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:55.643Z,1510151035.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:55.661Z,1510151035.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:56.025Z,1510151036.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:56.063Z,1510151036.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:56.699Z,1510151036.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:56.719Z,1510151036.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:56.817Z,1510151036.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:56.863Z,1510151036.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:57.243Z,1510151037.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:57.278Z,1510151037.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:57.645Z,1510151037.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:57.661Z,1510151037.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:58.034Z,1510151038.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:58.059Z,1510151038.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:58.423Z,1510151038.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:58.458Z,1510151038.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:58.819Z,1510151038.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:58.835Z,1510151038.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:59.225Z,1510151039.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:59.259Z,1510151039.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:23:59.651Z,1510151039.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:23:59.668Z,1510151039.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:00.019Z,1510151040.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:00.035Z,1510151040.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:00.445Z,1510151040.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:00.461Z,1510151040.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:01.114Z,1510151041.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:01.135Z,1510151041.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:01.277Z,1510151041.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:01.314Z,1510151041.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:01.690Z,1510151041.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:01.720Z,1510151041.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:02.090Z,1510151042.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:02.118Z,1510151042.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:02.491Z,1510151042.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:02.518Z,1510151042.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:02.878Z,1510151042.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:02.895Z,1510151042.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:03.279Z,1510151043.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:03.327Z,1510151043.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:03.680Z,1510151043.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:03.717Z,1510151043.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:04.080Z,1510151044.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:04.099Z,1510151044.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:04.501Z,1510151044.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:04.517Z,1510151044.517 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T14:24:04.517Z,1510151044.517 [BPC1] Data Fault, FailCount= 2
2017-11-08T14:24:04.517Z,1510151044.517 [BPC1](ERROR): Data Fault
2017-11-08T14:24:04.530Z,1510151044.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:04.610Z,1510151044.610 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T14:24:04.891Z,1510151044.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:04.930Z,1510151044.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:05.572Z,1510151045.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:05.595Z,1510151045.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:05.711Z,1510151045.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:05.739Z,1510151045.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:05.829Z,1510151045.829 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T14:24:05.829Z,1510151045.829 [BPC1] No Fault, FailCount= 2
2017-11-08T14:24:06.117Z,1510151046.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:06.192Z,1510151046.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:06.515Z,1510151046.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:06.540Z,1510151046.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:06.914Z,1510151046.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:06.939Z,1510151046.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:07.307Z,1510151047.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:07.344Z,1510151047.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:07.707Z,1510151047.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:07.741Z,1510151047.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:08.106Z,1510151048.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:08.139Z,1510151048.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:08.533Z,1510151048.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:08.555Z,1510151048.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:08.905Z,1510151048.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:08.921Z,1510151048.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:09.317Z,1510151049.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:09.349Z,1510151049.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:10.030Z,1510151050.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:10.055Z,1510151050.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:10.173Z,1510151050.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:10.212Z,1510151050.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:10.596Z,1510151050.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:10.613Z,1510151050.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:10.996Z,1510151050.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:11.012Z,1510151051.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:11.392Z,1510151051.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:11.409Z,1510151051.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:11.780Z,1510151051.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:11.808Z,1510151051.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:12.181Z,1510151052.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:12.210Z,1510151052.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:12.608Z,1510151052.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:12.624Z,1510151052.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:12.000Z,1510151053.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:13.016Z,1510151053.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:13.659Z,1510151053.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:13.681Z,1510151053.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:13.816Z,1510151053.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:13.859Z,1510151053.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:14.226Z,1510151054.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:14.272Z,1510151054.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:14.629Z,1510151054.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:14.656Z,1510151054.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:15.030Z,1510151055.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:15.056Z,1510151055.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:15.423Z,1510151055.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:15.455Z,1510151055.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:15.820Z,1510151055.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:15.836Z,1510151055.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:16.248Z,1510151056.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:16.264Z,1510151056.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:16.619Z,1510151056.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:16.636Z,1510151056.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:17.015Z,1510151057.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:17.031Z,1510151057.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:17.433Z,1510151057.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:17.461Z,1510151057.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:18.109Z,1510151058.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:18.125Z,1510151058.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:18.225Z,1510151058.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:18.267Z,1510151058.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:18.651Z,1510151058.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:18.668Z,1510151058.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:19.048Z,1510151059.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:19.064Z,1510151059.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:19.452Z,1510151059.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:19.469Z,1510151059.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:19.832Z,1510151059.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:19.866Z,1510151059.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:20.260Z,1510151060.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:20.283Z,1510151060.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:20.649Z,1510151060.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:20.665Z,1510151060.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:21.326Z,1510151061.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:21.358Z,1510151061.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:21.475Z,1510151061.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:21.519Z,1510151061.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:21.897Z,1510151061.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:21.919Z,1510151061.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:22.296Z,1510151062.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:22.312Z,1510151062.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:22.682Z,1510151062.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:22.707Z,1510151062.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:23.076Z,1510151063.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:23.100Z,1510151063.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:23.475Z,1510151063.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:23.512Z,1510151063.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:23.876Z,1510151063.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:23.893Z,1510151063.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:24.305Z,1510151064.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:24.321Z,1510151064.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:24.675Z,1510151064.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:24.696Z,1510151064.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:25.089Z,1510151065.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:25.122Z,1510151065.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:25.767Z,1510151065.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:25.792Z,1510151065.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:25.932Z,1510151065.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:25.971Z,1510151065.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:26.342Z,1510151066.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:26.441Z,1510151066.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:26.741Z,1510151066.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:26.757Z,1510151066.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:27.138Z,1510151067.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:27.183Z,1510151067.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:27.532Z,1510151067.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:27.548Z,1510151067.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:27.930Z,1510151067.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:27.980Z,1510151067.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:28.350Z,1510151068.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:28.378Z,1510151068.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:28.737Z,1510151068.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:28.760Z,1510151068.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:29.410Z,1510151069.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:29.435Z,1510151069.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:29.546Z,1510151069.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:29.573Z,1510151069.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:29.954Z,1510151069.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:29.982Z,1510151069.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:30.361Z,1510151070.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:30.389Z,1510151070.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:30.762Z,1510151070.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:30.788Z,1510151070.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:31.147Z,1510151071.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:31.163Z,1510151071.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:31.547Z,1510151071.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:31.563Z,1510151071.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:31.948Z,1510151071.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:31.991Z,1510151071.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:32.380Z,1510151072.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:32.396Z,1510151072.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:32.747Z,1510151072.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:32.767Z,1510151072.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:33.165Z,1510151073.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:33.193Z,1510151073.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:33.842Z,1510151073.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:33.857Z,1510151073.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:33.953Z,1510151073.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:34.003Z,1510151074.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:34.380Z,1510151074.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:34.404Z,1510151074.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:34.780Z,1510151074.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:34.799Z,1510151074.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:35.169Z,1510151075.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:35.202Z,1510151075.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:35.559Z,1510151075.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:35.576Z,1510151075.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:35.960Z,1510151075.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:36.002Z,1510151076.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:36.392Z,1510151076.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:36.409Z,1510151076.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:36.773Z,1510151076.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:36.801Z,1510151076.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:37.446Z,1510151077.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:37.462Z,1510151077.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:37.561Z,1510151077.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:37.612Z,1510151077.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:37.988Z,1510151077.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:38.011Z,1510151078.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:38.377Z,1510151078.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:38.402Z,1510151078.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:38.777Z,1510151078.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:38.810Z,1510151078.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:39.167Z,1510151079.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:39.184Z,1510151079.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:39.567Z,1510151079.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:39.587Z,1510151079.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:39.972Z,1510151079.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:39.988Z,1510151079.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:40.399Z,1510151080.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:40.415Z,1510151080.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:40.769Z,1510151080.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:40.785Z,1510151080.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:41.177Z,1510151081.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:41.202Z,1510151081.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:41.864Z,1510151081.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:41.880Z,1510151081.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:41.981Z,1510151081.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:42.026Z,1510151082.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:42.407Z,1510151082.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:42.423Z,1510151082.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:42.808Z,1510151082.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:42.824Z,1510151082.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:43.194Z,1510151083.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:43.226Z,1510151083.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:43.587Z,1510151083.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:43.618Z,1510151083.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:43.988Z,1510151083.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:44.018Z,1510151084.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:44.415Z,1510151084.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:44.431Z,1510151084.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:44.808Z,1510151084.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:44.825Z,1510151084.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:45.477Z,1510151085.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:45.494Z,1510151085.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:45.631Z,1510151085.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:45.672Z,1510151085.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:46.046Z,1510151086.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:46.082Z,1510151086.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:46.445Z,1510151086.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:46.480Z,1510151086.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:46.837Z,1510151086.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:46.870Z,1510151086.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:47.231Z,1510151087.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:47.247Z,1510151087.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:47.633Z,1510151087.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:47.687Z,1510151087.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:48.033Z,1510151088.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:48.099Z,1510151088.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:48.457Z,1510151088.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:48.481Z,1510151088.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:48.834Z,1510151088.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:48.891Z,1510151088.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:49.245Z,1510151089.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:49.278Z,1510151089.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:49.938Z,1510151089.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:49.987Z,1510151089.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:50.101Z,1510151090.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:50.137Z,1510151090.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:50.519Z,1510151090.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:50.536Z,1510151090.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:50.921Z,1510151090.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:50.936Z,1510151090.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:51.321Z,1510151091.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:51.338Z,1510151091.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:51.701Z,1510151091.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:51.733Z,1510151091.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:52.102Z,1510151092.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:52.141Z,1510151092.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:52.532Z,1510151092.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:52.548Z,1510151092.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:52.915Z,1510151092.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:52.946Z,1510151092.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:53.586Z,1510151093.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:53.602Z,1510151093.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:53.708Z,1510151093.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:53.746Z,1510151093.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:54.132Z,1510151094.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:54.148Z,1510151094.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:54.526Z,1510151094.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:54.541Z,1510151094.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:54.928Z,1510151094.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:54.944Z,1510151094.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:55.311Z,1510151095.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:55.342Z,1510151095.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:55.707Z,1510151095.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:55.744Z,1510151095.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:56.110Z,1510151096.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:56.141Z,1510151096.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:56.542Z,1510151096.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:56.563Z,1510151096.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:56.907Z,1510151096.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:56.944Z,1510151096.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:57.329Z,1510151097.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:57.345Z,1510151097.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:57.993Z,1510151097.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:58.038Z,1510151098.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:58.148Z,1510151098.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:58.165Z,1510151098.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:58.570Z,1510151098.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:58.602Z,1510151098.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:58.965Z,1510151098.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:58.991Z,1510151098.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:59.370Z,1510151099.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:59.397Z,1510151099.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:24:59.755Z,1510151099.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:24:59.792Z,1510151099.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:00.152Z,1510151100.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:00.172Z,1510151100.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:00.585Z,1510151100.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:00.602Z,1510151100.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:00.970Z,1510151100.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:00.996Z,1510151100.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:01.637Z,1510151101.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:01.653Z,1510151101.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:01.765Z,1510151101.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:01.794Z,1510151101.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:02.190Z,1510151102.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:02.212Z,1510151102.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:02.588Z,1510151102.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:02.604Z,1510151102.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:02.989Z,1510151102.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:03.005Z,1510151103.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:03.372Z,1510151103.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:03.402Z,1510151103.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:03.772Z,1510151103.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:03.802Z,1510151103.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:04.168Z,1510151104.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:04.193Z,1510151104.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:04.604Z,1510151104.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:04.620Z,1510151104.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:04.967Z,1510151104.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:04.983Z,1510151104.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:05.386Z,1510151105.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:05.420Z,1510151105.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:06.063Z,1510151106.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:06.084Z,1510151106.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:06.215Z,1510151106.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:06.231Z,1510151106.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:06.625Z,1510151106.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:06.660Z,1510151106.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:07.030Z,1510151107.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:07.061Z,1510151107.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:07.424Z,1510151107.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:07.457Z,1510151107.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:07.824Z,1510151107.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:07.867Z,1510151107.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:08.238Z,1510151108.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:08.262Z,1510151108.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:08.625Z,1510151108.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:08.644Z,1510151108.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:09.305Z,1510151109.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:09.322Z,1510151109.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:09.439Z,1510151109.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:09.487Z,1510151109.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:09.855Z,1510151109.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:09.916Z,1510151109.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:10.257Z,1510151110.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:10.293Z,1510151110.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:10.660Z,1510151110.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:10.676Z,1510151110.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:11.039Z,1510151111.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:11.088Z,1510151111.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:11.435Z,1510151111.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:11.451Z,1510151111.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:11.840Z,1510151111.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:11.887Z,1510151111.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:12.267Z,1510151112.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:12.284Z,1510151112.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:12.635Z,1510151112.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:12.651Z,1510151112.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:13.061Z,1510151113.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:13.077Z,1510151113.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:13.722Z,1510151113.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:13.739Z,1510151113.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:13.845Z,1510151113.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:13.880Z,1510151113.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:14.271Z,1510151114.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:14.292Z,1510151114.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:14.667Z,1510151114.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:14.683Z,1510151114.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:15.068Z,1510151115.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:15.084Z,1510151115.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:15.451Z,1510151115.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:15.485Z,1510151115.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:15.852Z,1510151115.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:15.883Z,1510151115.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:16.275Z,1510151116.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:16.291Z,1510151116.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:16.672Z,1510151116.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:16.695Z,1510151116.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:17.326Z,1510151117.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:17.342Z,1510151117.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:17.478Z,1510151117.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:17.518Z,1510151117.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:17.890Z,1510151117.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:17.922Z,1510151117.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:18.289Z,1510151118.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:18.324Z,1510151118.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:18.689Z,1510151118.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:18.726Z,1510151118.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:19.078Z,1510151119.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:19.094Z,1510151119.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:19.478Z,1510151119.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:19.493Z,1510151119.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:19.878Z,1510151119.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:19.939Z,1510151119.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:20.302Z,1510151120.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:20.331Z,1510151120.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:20.680Z,1510151120.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:20.703Z,1510151120.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:21.089Z,1510151121.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:21.106Z,1510151121.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:21.768Z,1510151121.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:21.791Z,1510151121.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:21.893Z,1510151121.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:21.943Z,1510151121.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:22.321Z,1510151122.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:22.337Z,1510151122.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:22.720Z,1510151122.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:22.736Z,1510151122.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:23.110Z,1510151123.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:23.140Z,1510151123.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:23.500Z,1510151123.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:23.528Z,1510151123.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:23.900Z,1510151123.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:23.933Z,1510151123.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:24.328Z,1510151124.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:24.344Z,1510151124.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:24.714Z,1510151124.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:24.740Z,1510151124.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:25.440Z,1510151125.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:25.463Z,1510151125.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:25.597Z,1510151125.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:25.643Z,1510151125.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:26.017Z,1510151126.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:26.043Z,1510151126.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:26.428Z,1510151126.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:26.444Z,1510151126.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:26.809Z,1510151126.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:26.833Z,1510151126.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:27.208Z,1510151127.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:27.224Z,1510151127.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:27.605Z,1510151127.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:27.622Z,1510151127.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:28.003Z,1510151128.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:28.019Z,1510151128.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:28.438Z,1510151128.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:28.459Z,1510151128.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:28.807Z,1510151128.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:28.823Z,1510151128.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:29.218Z,1510151129.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:29.250Z,1510151129.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:29.893Z,1510151129.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:29.909Z,1510151129.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:30.016Z,1510151130.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:30.055Z,1510151130.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:30.436Z,1510151130.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:30.452Z,1510151130.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:30.837Z,1510151130.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:30.859Z,1510151130.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:31.236Z,1510151131.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:31.252Z,1510151131.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:31.615Z,1510151131.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:31.648Z,1510151131.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:32.012Z,1510151132.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:32.110Z,1510151132.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:32.446Z,1510151132.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:32.462Z,1510151132.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:32.830Z,1510151132.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:32.883Z,1510151132.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:33.492Z,1510151133.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:33.508Z,1510151133.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:33.623Z,1510151133.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:33.701Z,1510151133.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:34.044Z,1510151134.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:34.068Z,1510151134.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:34.445Z,1510151134.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:34.460Z,1510151134.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:34.844Z,1510151134.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:34.860Z,1510151134.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:35.227Z,1510151135.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:35.258Z,1510151135.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:35.627Z,1510151135.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:35.659Z,1510151135.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:36.028Z,1510151136.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:36.064Z,1510151136.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:36.455Z,1510151136.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:36.472Z,1510151136.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:36.824Z,1510151136.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:36.861Z,1510151136.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:37.249Z,1510151137.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:37.274Z,1510151137.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:37.918Z,1510151137.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:37.934Z,1510151137.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:38.066Z,1510151138.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:38.121Z,1510151138.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:38.488Z,1510151138.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:38.522Z,1510151138.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:38.883Z,1510151138.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:38.908Z,1510151138.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:39.285Z,1510151139.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:39.335Z,1510151139.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:39.671Z,1510151139.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:39.719Z,1510151139.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:40.072Z,1510151140.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:40.111Z,1510151140.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:40.501Z,1510151140.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:40.517Z,1510151140.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:40.885Z,1510151140.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:40.931Z,1510151140.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:41.554Z,1510151141.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:41.561Z,1510151141.561 [PNI_TCM](ERROR): CRC does not match. Expected:0x24031 got:0x3987
2017-11-08T14:25:41.581Z,1510151141.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:41.719Z,1510151141.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:41.765Z,1510151141.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:42.148Z,1510151142.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:42.164Z,1510151142.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:42.540Z,1510151142.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:42.574Z,1510151142.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:42.942Z,1510151142.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:42.969Z,1510151142.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:43.327Z,1510151143.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:43.348Z,1510151143.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:43.731Z,1510151143.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:43.747Z,1510151143.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:44.128Z,1510151144.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:44.145Z,1510151144.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:44.563Z,1510151144.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:44.580Z,1510151144.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:44.927Z,1510151144.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:44.947Z,1510151144.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:45.337Z,1510151145.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:45.366Z,1510151145.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:46.020Z,1510151146.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:46.036Z,1510151146.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:46.141Z,1510151146.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:46.165Z,1510151146.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:46.569Z,1510151146.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:46.585Z,1510151146.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:46.969Z,1510151146.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:46.986Z,1510151146.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:47.353Z,1510151147.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:47.387Z,1510151147.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:47.751Z,1510151147.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:47.783Z,1510151147.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:48.149Z,1510151148.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:48.185Z,1510151148.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:48.577Z,1510151148.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:48.593Z,1510151148.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:48.957Z,1510151148.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:48.986Z,1510151148.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:49.638Z,1510151149.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:49.655Z,1510151149.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:49.791Z,1510151149.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:49.808Z,1510151149.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:50.205Z,1510151150.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:50.231Z,1510151150.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:50.606Z,1510151150.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:50.629Z,1510151150.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:50.998Z,1510151150.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:51.030Z,1510151151.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:51.388Z,1510151151.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:51.404Z,1510151151.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:51.788Z,1510151151.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:51.805Z,1510151151.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:52.185Z,1510151152.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:52.214Z,1510151152.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:52.610Z,1510151152.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:52.641Z,1510151152.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:52.990Z,1510151152.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:53.007Z,1510151153.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:53.398Z,1510151153.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:53.459Z,1510151153.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:54.061Z,1510151154.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:54.124Z,1510151154.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:54.253Z,1510151154.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:54.270Z,1510151154.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:54.662Z,1510151154.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:54.719Z,1510151154.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:55.057Z,1510151155.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:55.079Z,1510151155.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:55.458Z,1510151155.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:55.504Z,1510151155.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:55.850Z,1510151155.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:55.866Z,1510151155.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:56.269Z,1510151156.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:56.293Z,1510151156.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:56.660Z,1510151156.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:56.677Z,1510151156.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:57.337Z,1510151157.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:57.356Z,1510151157.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:57.469Z,1510151157.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:57.519Z,1510151157.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:57.895Z,1510151157.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:57.912Z,1510151157.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:58.292Z,1510151158.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:58.308Z,1510151158.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:58.697Z,1510151158.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:58.713Z,1510151158.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:59.075Z,1510151159.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:59.108Z,1510151159.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:59.476Z,1510151159.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:59.511Z,1510151159.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:25:59.877Z,1510151159.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:25:59.913Z,1510151159.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:00.307Z,1510151160.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:00.327Z,1510151160.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:00.671Z,1510151160.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:00.687Z,1510151160.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:01.086Z,1510151161.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:01.124Z,1510151161.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:01.766Z,1510151161.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:01.788Z,1510151161.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:01.922Z,1510151161.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:01.967Z,1510151161.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:02.329Z,1510151162.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:02.361Z,1510151162.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:02.733Z,1510151162.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:02.758Z,1510151162.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:03.125Z,1510151163.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:03.150Z,1510151163.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:03.519Z,1510151163.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:03.570Z,1510151163.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:03.919Z,1510151163.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:03.936Z,1510151163.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:04.337Z,1510151164.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:04.363Z,1510151164.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:04.730Z,1510151164.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:04.778Z,1510151164.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:05.412Z,1510151165.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:05.435Z,1510151165.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:05.571Z,1510151165.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:05.611Z,1510151165.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:05.985Z,1510151165.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:06.017Z,1510151166.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:06.385Z,1510151166.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:06.415Z,1510151166.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:06.781Z,1510151166.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:06.806Z,1510151166.806 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:06.806Z,1510151166.806 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2017-11-08T14:26:06.806Z,1510151166.806 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T14:26:06.808Z,1510151166.808 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:06.808Z,1510151166.808 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21
2017-11-08T14:26:06.808Z,1510151166.808 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T14:26:06.814Z,1510151166.814 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:06.814Z,1510151166.814 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 21
2017-11-08T14:26:06.814Z,1510151166.814 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T14:26:06.899Z,1510151166.899 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T14:26:06.899Z,1510151166.899 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T14:26:06.899Z,1510151166.899 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T14:26:07.173Z,1510151167.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:07.273Z,1510151167.273 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T14:26:07.273Z,1510151167.273 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2017-11-08T14:26:07.273Z,1510151167.273 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T14:26:07.273Z,1510151167.273 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21
2017-11-08T14:26:07.274Z,1510151167.274 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T14:26:07.274Z,1510151167.274 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 21
2017-11-08T14:26:07.575Z,1510151167.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:07.594Z,1510151167.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T14:26:07.595Z,1510151167.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:26:07.595Z,1510151167.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:26:07.596Z,1510151167.596 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T14:26:07.596Z,1510151167.596 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:26:07.597Z,1510151167.597 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:26:07.597Z,1510151167.597 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T14:26:07.597Z,1510151167.597 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:26:07.598Z,1510151167.598 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:26:07.974Z,1510151167.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:07.990Z,1510151167.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T14:26:07.991Z,1510151167.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:08.397Z,1510151168.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:08.425Z,1510151168.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T14:26:08.426Z,1510151168.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:08.778Z,1510151168.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:08.799Z,1510151168.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T14:26:08.800Z,1510151168.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:09.187Z,1510151169.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:09.204Z,1510151169.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T14:26:09.205Z,1510151169.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:09.854Z,1510151169.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:09.882Z,1510151169.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.1 s old, using for 20.0 s.
2017-11-08T14:26:09.883Z,1510151169.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:09.999Z,1510151169.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:10.039Z,1510151170.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T14:26:10.040Z,1510151170.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:10.421Z,1510151170.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:10.437Z,1510151170.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T14:26:10.438Z,1510151170.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:10.809Z,1510151170.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:10.842Z,1510151170.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T14:26:10.843Z,1510151170.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:11.221Z,1510151171.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:11.237Z,1510151171.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T14:26:11.238Z,1510151171.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:11.600Z,1510151171.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:11.638Z,1510151171.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T14:26:11.639Z,1510151171.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:12.001Z,1510151172.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:12.035Z,1510151172.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T14:26:12.036Z,1510151172.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:12.432Z,1510151172.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:12.448Z,1510151172.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T14:26:12.449Z,1510151172.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:12.818Z,1510151172.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:12.840Z,1510151172.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T14:26:12.841Z,1510151172.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:13.483Z,1510151173.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:13.499Z,1510151173.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2017-11-08T14:26:13.500Z,1510151173.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:13.612Z,1510151173.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:13.659Z,1510151173.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T14:26:13.660Z,1510151173.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:14.029Z,1510151174.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:14.045Z,1510151174.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T14:26:14.046Z,1510151174.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:14.429Z,1510151174.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:14.451Z,1510151174.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T14:26:14.452Z,1510151174.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:14.832Z,1510151174.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:14.848Z,1510151174.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T14:26:14.849Z,1510151174.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:15.211Z,1510151175.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:15.289Z,1510151175.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T14:26:15.290Z,1510151175.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:15.607Z,1510151175.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:15.664Z,1510151175.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T14:26:15.665Z,1510151175.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:16.013Z,1510151176.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:16.043Z,1510151176.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T14:26:16.044Z,1510151176.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:16.434Z,1510151176.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:16.486Z,1510151176.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T14:26:16.487Z,1510151176.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:16.811Z,1510151176.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:16.842Z,1510151176.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T14:26:16.843Z,1510151176.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:17.231Z,1510151177.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:17.291Z,1510151177.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T14:26:17.291Z,1510151177.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:17.902Z,1510151177.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:17.917Z,1510151177.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2017-11-08T14:26:17.918Z,1510151177.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:18.048Z,1510151178.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:18.101Z,1510151178.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T14:26:18.102Z,1510151178.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:18.470Z,1510151178.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:18.501Z,1510151178.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T14:26:18.502Z,1510151178.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:18.871Z,1510151178.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:18.898Z,1510151178.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T14:26:18.899Z,1510151178.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:19.266Z,1510151179.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:19.310Z,1510151179.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T14:26:19.311Z,1510151179.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:19.655Z,1510151179.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:19.698Z,1510151179.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T14:26:19.699Z,1510151179.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:20.056Z,1510151180.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:20.071Z,1510151180.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T14:26:20.072Z,1510151180.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:20.489Z,1510151180.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:20.505Z,1510151180.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T14:26:20.506Z,1510151180.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:20.873Z,1510151180.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:20.910Z,1510151180.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T14:26:20.911Z,1510151180.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:21.543Z,1510151181.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:21.558Z,1510151181.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T14:26:21.559Z,1510151181.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:21.661Z,1510151181.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:21.714Z,1510151181.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T14:26:21.715Z,1510151181.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:22.087Z,1510151182.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:22.110Z,1510151182.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T14:26:22.111Z,1510151182.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:22.477Z,1510151182.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:22.514Z,1510151182.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T14:26:22.515Z,1510151182.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:22.890Z,1510151182.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:22.909Z,1510151182.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T14:26:22.910Z,1510151182.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:23.267Z,1510151183.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:23.309Z,1510151183.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T14:26:23.310Z,1510151183.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:23.667Z,1510151183.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:23.701Z,1510151183.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T14:26:23.702Z,1510151183.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:24.064Z,1510151184.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:24.080Z,1510151184.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T14:26:24.093Z,1510151184.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:24.503Z,1510151184.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:24.519Z,1510151184.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T14:26:24.521Z,1510151184.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:24.867Z,1510151184.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:24.902Z,1510151184.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T14:26:24.903Z,1510151184.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:25.283Z,1510151185.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:25.350Z,1510151185.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T14:26:25.351Z,1510151185.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:25.962Z,1510151185.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:25.978Z,1510151185.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T14:26:25.979Z,1510151185.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:26.115Z,1510151186.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:26.131Z,1510151186.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T14:26:26.132Z,1510151186.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:26.532Z,1510151186.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:26.559Z,1510151186.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-08T14:26:26.560Z,1510151186.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:26.926Z,1510151186.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:26.957Z,1510151186.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:27.319Z,1510151187.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:27.336Z,1510151187.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:27.714Z,1510151187.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:27.730Z,1510151187.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:28.111Z,1510151188.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:28.132Z,1510151188.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:28.533Z,1510151188.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:28.559Z,1510151188.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:28.925Z,1510151188.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:28.960Z,1510151188.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:29.600Z,1510151189.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:29.623Z,1510151189.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:29.725Z,1510151189.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:29.749Z,1510151189.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:30.154Z,1510151190.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:30.170Z,1510151190.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:30.541Z,1510151190.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:30.576Z,1510151190.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:30.941Z,1510151190.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:30.974Z,1510151190.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:31.328Z,1510151191.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:31.374Z,1510151191.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:31.727Z,1510151191.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:31.744Z,1510151191.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:32.132Z,1510151192.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:32.149Z,1510151192.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:32.570Z,1510151192.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:32.591Z,1510151192.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:32.945Z,1510151192.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:32.981Z,1510151192.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:33.619Z,1510151193.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:33.635Z,1510151193.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:33.748Z,1510151193.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:33.788Z,1510151193.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:34.164Z,1510151194.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:34.181Z,1510151194.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:34.568Z,1510151194.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:34.592Z,1510151194.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:34.966Z,1510151194.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:34.990Z,1510151194.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:35.347Z,1510151195.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:35.383Z,1510151195.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:35.747Z,1510151195.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:35.782Z,1510151195.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:36.148Z,1510151196.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:36.186Z,1510151196.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:36.577Z,1510151196.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:36.593Z,1510151196.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:36.947Z,1510151196.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:36.987Z,1510151196.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:37.347Z,1510151197.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:37.438Z,1510151197.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:37.751Z,1510151197.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:37.803Z,1510151197.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:38.148Z,1510151198.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:38.177Z,1510151198.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:38.551Z,1510151198.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:38.592Z,1510151198.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:38.954Z,1510151198.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:38.976Z,1510151198.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:39.354Z,1510151199.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:39.409Z,1510151199.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:39.755Z,1510151199.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:39.771Z,1510151199.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:40.146Z,1510151200.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:40.170Z,1510151200.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:40.553Z,1510151200.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:40.570Z,1510151200.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:40.954Z,1510151200.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:40.970Z,1510151200.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:41.347Z,1510151201.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:41.369Z,1510151201.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:41.753Z,1510151201.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:41.770Z,1510151201.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:42.154Z,1510151202.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:42.170Z,1510151202.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:42.547Z,1510151202.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:42.568Z,1510151202.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:42.953Z,1510151202.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:42.970Z,1510151202.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:43.363Z,1510151203.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:43.384Z,1510151203.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:44.044Z,1510151204.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:44.060Z,1510151204.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:44.173Z,1510151204.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:44.190Z,1510151204.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:44.594Z,1510151204.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:44.630Z,1510151204.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:44.990Z,1510151204.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:45.017Z,1510151205.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:45.388Z,1510151205.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:45.419Z,1510151205.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:45.780Z,1510151205.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:45.796Z,1510151205.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:46.177Z,1510151206.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:46.193Z,1510151206.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:46.608Z,1510151206.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:46.625Z,1510151206.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:46.980Z,1510151206.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:46.996Z,1510151206.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:47.376Z,1510151207.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:47.392Z,1510151207.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:47.793Z,1510151207.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:47.847Z,1510151207.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:48.463Z,1510151208.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:48.479Z,1510151208.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:48.585Z,1510151208.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:48.613Z,1510151208.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:48.998Z,1510151208.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:49.030Z,1510151209.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:49.393Z,1510151209.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:49.409Z,1510151209.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:49.797Z,1510151209.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:49.813Z,1510151209.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:50.187Z,1510151210.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:50.208Z,1510151210.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:50.586Z,1510151210.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:50.602Z,1510151210.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:50.987Z,1510151210.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:51.008Z,1510151211.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:51.410Z,1510151211.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:51.433Z,1510151211.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:51.786Z,1510151211.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:51.802Z,1510151211.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:52.197Z,1510151212.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:52.214Z,1510151212.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:52.880Z,1510151212.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:52.943Z,1510151212.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:53.069Z,1510151213.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:53.109Z,1510151213.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:53.489Z,1510151213.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:53.512Z,1510151213.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:53.896Z,1510151213.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:53.912Z,1510151213.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:54.292Z,1510151214.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:54.309Z,1510151214.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:54.675Z,1510151214.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:54.708Z,1510151214.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:55.076Z,1510151215.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:55.110Z,1510151215.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:55.507Z,1510151215.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:55.527Z,1510151215.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:55.875Z,1510151215.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:55.904Z,1510151215.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:56.296Z,1510151216.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:56.312Z,1510151216.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:56.958Z,1510151216.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:56.975Z,1510151216.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:57.079Z,1510151217.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:57.112Z,1510151217.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:57.496Z,1510151217.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:57.513Z,1510151217.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:57.897Z,1510151217.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:57.913Z,1510151217.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:58.300Z,1510151218.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:58.316Z,1510151218.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:58.675Z,1510151218.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:58.712Z,1510151218.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:59.080Z,1510151219.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:59.116Z,1510151219.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:59.511Z,1510151219.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:59.531Z,1510151219.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:26:59.900Z,1510151219.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:26:59.975Z,1510151219.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:00.582Z,1510151220.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:00.611Z,1510151220.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:00.723Z,1510151220.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:00.764Z,1510151220.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:01.130Z,1510151221.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:01.158Z,1510151221.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:01.529Z,1510151221.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:01.576Z,1510151221.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:01.934Z,1510151221.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:01.956Z,1510151221.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:02.326Z,1510151222.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:02.372Z,1510151222.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:02.723Z,1510151222.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:02.739Z,1510151222.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:03.124Z,1510151223.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:03.141Z,1510151223.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:03.552Z,1510151223.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:03.567Z,1510151223.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:03.937Z,1510151223.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:03.965Z,1510151223.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:04.618Z,1510151224.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:04.640Z,1510151224.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:04.774Z,1510151224.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:04.815Z,1510151224.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:05.181Z,1510151225.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:05.209Z,1510151225.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:05.577Z,1510151225.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:05.593Z,1510151225.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:05.981Z,1510151225.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:06.010Z,1510151226.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:06.370Z,1510151226.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:06.386Z,1510151226.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:06.770Z,1510151226.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:06.786Z,1510151226.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:07.171Z,1510151227.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:07.187Z,1510151227.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:07.594Z,1510151227.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:07.634Z,1510151227.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:07.984Z,1510151227.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:07.000Z,1510151228.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:08.643Z,1510151228.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:08.660Z,1510151228.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:08.771Z,1510151228.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:08.819Z,1510151228.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:09.187Z,1510151229.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:09.204Z,1510151229.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:09.591Z,1510151229.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:09.607Z,1510151229.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:09.992Z,1510151229.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:10.012Z,1510151230.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:10.367Z,1510151230.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:10.436Z,1510151230.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:10.771Z,1510151230.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:10.796Z,1510151230.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:11.171Z,1510151231.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:11.204Z,1510151231.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:11.594Z,1510151231.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:11.612Z,1510151231.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:11.971Z,1510151231.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:12.002Z,1510151232.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:12.392Z,1510151232.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:12.408Z,1510151232.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:13.066Z,1510151233.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:13.095Z,1510151233.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:13.211Z,1510151233.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:13.243Z,1510151233.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:13.632Z,1510151233.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:13.650Z,1510151233.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:14.025Z,1510151234.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:14.048Z,1510151234.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:14.428Z,1510151234.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:14.444Z,1510151234.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:14.812Z,1510151234.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:14.848Z,1510151234.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:15.234Z,1510151235.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:15.254Z,1510151235.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:15.620Z,1510151235.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:15.644Z,1510151235.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:16.293Z,1510151236.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:16.309Z,1510151236.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:16.437Z,1510151236.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:16.485Z,1510151236.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:16.846Z,1510151236.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:16.862Z,1510151236.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:17.249Z,1510151237.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:17.271Z,1510151237.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:17.646Z,1510151237.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:17.668Z,1510151237.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:18.040Z,1510151238.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:18.057Z,1510151238.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:18.442Z,1510151238.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:18.458Z,1510151238.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:18.834Z,1510151238.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:18.866Z,1510151238.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:19.261Z,1510151239.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:19.278Z,1510151239.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:19.642Z,1510151239.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:19.658Z,1510151239.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:20.051Z,1510151240.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:20.072Z,1510151240.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:20.733Z,1510151240.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:20.749Z,1510151240.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:20.861Z,1510151240.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:20.913Z,1510151240.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:21.280Z,1510151241.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:21.341Z,1510151241.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:21.688Z,1510151241.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:21.719Z,1510151241.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:22.090Z,1510151242.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:22.110Z,1510151242.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:22.467Z,1510151242.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:22.527Z,1510151242.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:22.867Z,1510151242.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:22.901Z,1510151242.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:23.268Z,1510151243.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:23.302Z,1510151243.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:23.697Z,1510151243.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:23.751Z,1510151243.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:24.083Z,1510151244.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:24.112Z,1510151244.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:24.752Z,1510151244.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:24.808Z,1510151244.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:24.921Z,1510151244.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:24.954Z,1510151244.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:25.338Z,1510151245.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:25.368Z,1510151245.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:25.729Z,1510151245.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:25.765Z,1510151245.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:26.130Z,1510151246.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:26.162Z,1510151246.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:26.527Z,1510151246.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:26.543Z,1510151246.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:26.924Z,1510151246.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:26.940Z,1510151246.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:27.345Z,1510151247.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:27.376Z,1510151247.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:27.722Z,1510151247.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:27.737Z,1510151247.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:28.122Z,1510151248.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:28.138Z,1510151248.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:28.541Z,1510151248.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:28.567Z,1510151248.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:29.233Z,1510151249.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:29.270Z,1510151249.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:29.377Z,1510151249.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:29.393Z,1510151249.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:29.798Z,1510151249.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:29.831Z,1510151249.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:30.197Z,1510151250.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:30.222Z,1510151250.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:30.593Z,1510151250.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:30.632Z,1510151250.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:30.984Z,1510151250.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:30.000Z,1510151251.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:31.383Z,1510151251.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:31.399Z,1510151251.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:31.784Z,1510151251.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:31.800Z,1510151251.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:32.185Z,1510151252.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:32.201Z,1510151252.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:32.612Z,1510151252.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:32.628Z,1510151252.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:32.993Z,1510151252.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:33.039Z,1510151253.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:33.671Z,1510151253.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:33.694Z,1510151253.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:33.826Z,1510151253.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:33.842Z,1510151253.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:34.233Z,1510151254.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:34.273Z,1510151254.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:34.630Z,1510151254.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:34.646Z,1510151254.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:35.027Z,1510151255.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:35.043Z,1510151255.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:35.422Z,1510151255.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:35.438Z,1510151255.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:35.822Z,1510151255.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:35.838Z,1510151255.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:36.237Z,1510151256.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:36.265Z,1510151256.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:36.622Z,1510151256.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:36.638Z,1510151256.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:37.030Z,1510151257.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:37.046Z,1510151257.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:37.693Z,1510151257.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:37.724Z,1510151257.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:37.839Z,1510151257.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:37.872Z,1510151257.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:38.250Z,1510151258.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:38.275Z,1510151258.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:38.664Z,1510151258.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:38.680Z,1510151258.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:39.054Z,1510151259.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:39.086Z,1510151259.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:39.439Z,1510151259.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:39.480Z,1510151259.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:39.844Z,1510151259.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:39.876Z,1510151259.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:40.272Z,1510151260.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:40.295Z,1510151260.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:40.643Z,1510151260.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:40.680Z,1510151260.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:41.043Z,1510151261.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:41.063Z,1510151261.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:41.443Z,1510151261.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:41.459Z,1510151261.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:41.840Z,1510151261.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:41.856Z,1510151261.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:42.243Z,1510151262.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:42.263Z,1510151262.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:42.639Z,1510151262.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:42.655Z,1510151262.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:43.043Z,1510151263.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:43.063Z,1510151263.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:43.443Z,1510151263.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:43.464Z,1510151263.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:43.846Z,1510151263.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:43.924Z,1510151263.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:44.240Z,1510151264.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:44.273Z,1510151264.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:44.640Z,1510151264.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:44.807Z,1510151264.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:45.043Z,1510151265.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:45.059Z,1510151265.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:45.439Z,1510151265.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:45.456Z,1510151265.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:45.839Z,1510151265.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:45.896Z,1510151265.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:46.240Z,1510151266.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:46.256Z,1510151266.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:46.636Z,1510151266.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:46.690Z,1510151266.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:47.054Z,1510151267.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:47.080Z,1510151267.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:47.734Z,1510151267.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:47.750Z,1510151267.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:47.861Z,1510151267.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:47.903Z,1510151267.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:48.287Z,1510151268.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:48.304Z,1510151268.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:48.687Z,1510151268.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:48.703Z,1510151268.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:49.084Z,1510151269.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:49.100Z,1510151269.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:49.467Z,1510151269.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:49.492Z,1510151269.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:49.868Z,1510151269.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:49.893Z,1510151269.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:50.294Z,1510151270.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:50.310Z,1510151270.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:50.667Z,1510151270.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:50.692Z,1510151270.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:51.067Z,1510151271.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:51.093Z,1510151271.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:51.487Z,1510151271.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:51.504Z,1510151271.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:52.159Z,1510151272.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:52.206Z,1510151272.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:52.340Z,1510151272.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:52.371Z,1510151272.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:52.750Z,1510151272.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:52.766Z,1510151272.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:53.149Z,1510151273.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:53.166Z,1510151273.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:53.545Z,1510151273.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:53.562Z,1510151273.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:53.942Z,1510151273.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:53.958Z,1510151273.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:54.340Z,1510151274.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:54.356Z,1510151274.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:54.741Z,1510151274.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:54.799Z,1510151274.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:55.141Z,1510151275.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:55.163Z,1510151275.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:55.558Z,1510151275.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:55.590Z,1510151275.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:55.942Z,1510151275.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:55.958Z,1510151275.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:56.341Z,1510151276.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:56.358Z,1510151276.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:56.741Z,1510151276.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:56.757Z,1510151276.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:57.138Z,1510151277.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:57.154Z,1510151277.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:57.541Z,1510151277.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:57.557Z,1510151277.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:57.941Z,1510151277.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:57.957Z,1510151277.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:58.341Z,1510151278.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:58.357Z,1510151278.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:58.741Z,1510151278.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:58.757Z,1510151278.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:59.138Z,1510151279.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:59.154Z,1510151279.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:59.538Z,1510151279.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:59.554Z,1510151279.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:27:59.950Z,1510151279.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:27:59.966Z,1510151279.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:00.625Z,1510151280.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:00.642Z,1510151280.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:00.754Z,1510151280.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:00.804Z,1510151280.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:01.170Z,1510151281.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:01.202Z,1510151281.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:01.581Z,1510151281.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:01.597Z,1510151281.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:01.969Z,1510151281.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:02.004Z,1510151282.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:02.360Z,1510151282.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:02.392Z,1510151282.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:02.760Z,1510151282.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:02.776Z,1510151282.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:03.156Z,1510151283.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:03.173Z,1510151283.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:03.588Z,1510151283.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:03.604Z,1510151283.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:03.967Z,1510151283.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:03.996Z,1510151283.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:04.378Z,1510151284.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:04.405Z,1510151284.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:05.054Z,1510151285.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:05.070Z,1510151285.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:05.180Z,1510151285.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:05.228Z,1510151285.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:05.602Z,1510151285.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:05.663Z,1510151285.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:06.001Z,1510151286.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:06.017Z,1510151286.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:06.401Z,1510151286.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:06.417Z,1510151286.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:06.780Z,1510151286.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:06.813Z,1510151286.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:07.180Z,1510151287.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:07.236Z,1510151287.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:07.607Z,1510151287.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:07.624Z,1510151287.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:07.979Z,1510151287.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:08.027Z,1510151288.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:08.379Z,1510151288.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:08.411Z,1510151288.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:08.800Z,1510151288.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:08.857Z,1510151288.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:09.466Z,1510151289.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:09.482Z,1510151289.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:09.620Z,1510151289.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:09.667Z,1510151289.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:10.030Z,1510151290.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:10.062Z,1510151290.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:10.438Z,1510151290.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:10.454Z,1510151290.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:10.826Z,1510151290.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:10.856Z,1510151290.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:11.215Z,1510151291.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:11.251Z,1510151291.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:11.611Z,1510151291.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:11.627Z,1510151291.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:12.016Z,1510151292.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:12.056Z,1510151292.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:12.442Z,1510151292.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:12.464Z,1510151292.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:12.815Z,1510151292.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:12.831Z,1510151292.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:13.224Z,1510151293.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:13.266Z,1510151293.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:13.914Z,1510151293.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:13.936Z,1510151293.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:14.065Z,1510151294.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:14.115Z,1510151294.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:14.483Z,1510151294.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:14.524Z,1510151294.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:14.891Z,1510151294.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:14.906Z,1510151294.906 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-08T14:28:14.936Z,1510151294.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:15.295Z,1510151295.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:15.312Z,1510151295.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:15.673Z,1510151295.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:15.711Z,1510151295.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:16.072Z,1510151296.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:16.112Z,1510151296.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:16.508Z,1510151296.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:16.525Z,1510151296.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:16.890Z,1510151296.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:16.950Z,1510151296.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:17.555Z,1510151297.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:17.571Z,1510151297.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:17.669Z,1510151297.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:17.723Z,1510151297.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:18.094Z,1510151298.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:18.115Z,1510151298.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:18.498Z,1510151298.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:18.515Z,1510151298.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:18.898Z,1510151298.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:18.914Z,1510151298.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:19.279Z,1510151299.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:19.323Z,1510151299.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:19.671Z,1510151299.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:19.698Z,1510151299.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:20.072Z,1510151300.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:20.109Z,1510151300.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:20.505Z,1510151300.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:20.521Z,1510151300.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:20.872Z,1510151300.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:20.917Z,1510151300.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:21.285Z,1510151301.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:21.316Z,1510151301.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:22.111Z,1510151302.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:22.128Z,1510151302.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:22.240Z,1510151302.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:22.288Z,1510151302.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:22.659Z,1510151302.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:22.680Z,1510151302.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:23.055Z,1510151303.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:23.070Z,1510151303.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:23.460Z,1510151303.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:23.476Z,1510151303.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:23.848Z,1510151303.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:23.864Z,1510151303.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:24.262Z,1510151304.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:24.278Z,1510151304.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:24.661Z,1510151304.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:24.677Z,1510151304.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:25.331Z,1510151305.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:25.359Z,1510151305.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:25.483Z,1510151305.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:25.519Z,1510151305.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:25.904Z,1510151305.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:25.920Z,1510151305.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:26.303Z,1510151306.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:26.319Z,1510151306.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:26.700Z,1510151306.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:26.717Z,1510151306.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:27.088Z,1510151307.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:27.114Z,1510151307.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:27.483Z,1510151307.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:27.559Z,1510151307.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:27.884Z,1510151307.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:27.916Z,1510151307.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:28.316Z,1510151308.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:28.332Z,1510151308.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:28.708Z,1510151308.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:28.732Z,1510151308.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:29.363Z,1510151309.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:29.439Z,1510151309.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:29.574Z,1510151309.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:29.613Z,1510151309.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:29.978Z,1510151309.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:29.994Z,1510151309.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:30.373Z,1510151310.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:30.427Z,1510151310.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:30.778Z,1510151310.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:30.794Z,1510151310.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:31.162Z,1510151311.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:31.215Z,1510151311.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:31.565Z,1510151311.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:31.587Z,1510151311.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:31.969Z,1510151311.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:31.989Z,1510151311.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:32.386Z,1510151312.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:32.410Z,1510151312.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:32.777Z,1510151312.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:32.793Z,1510151312.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:33.494Z,1510151313.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:33.515Z,1510151313.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:33.629Z,1510151313.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:33.679Z,1510151313.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:34.018Z,1510151314.018 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T14:28:34.018Z,1510151314.018 [NAL9602] Data Fault, FailCount= 2
2017-11-08T14:28:34.018Z,1510151314.018 [NAL9602](ERROR): Data Fault
2017-11-08T14:28:34.036Z,1510151314.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:34.052Z,1510151314.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:34.162Z,1510151314.162 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T14:28:34.417Z,1510151314.417 [NAL9602](INFO): Powering down
2017-11-08T14:28:34.435Z,1510151314.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:34.455Z,1510151314.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:34.833Z,1510151314.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:34.849Z,1510151314.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:35.239Z,1510151315.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:35.275Z,1510151315.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:35.352Z,1510151315.352 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T14:28:35.353Z,1510151315.353 [NAL9602] No Fault, FailCount= 2
2017-11-08T14:28:35.633Z,1510151315.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:35.649Z,1510151315.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:36.033Z,1510151316.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:36.049Z,1510151316.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:36.439Z,1510151316.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:36.479Z,1510151316.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:36.837Z,1510151316.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:36.878Z,1510151316.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:37.239Z,1510151317.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:37.255Z,1510151317.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:37.638Z,1510151317.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:37.654Z,1510151317.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:38.038Z,1510151318.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:38.054Z,1510151318.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:38.432Z,1510151318.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:38.448Z,1510151318.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:38.838Z,1510151318.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:38.854Z,1510151318.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:39.239Z,1510151319.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:39.299Z,1510151319.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:39.639Z,1510151319.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:39.655Z,1510151319.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:40.038Z,1510151320.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:40.054Z,1510151320.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:40.438Z,1510151320.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:40.454Z,1510151320.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:40.838Z,1510151320.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:40.854Z,1510151320.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:41.237Z,1510151321.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:41.253Z,1510151321.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:41.638Z,1510151321.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:41.655Z,1510151321.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:42.034Z,1510151322.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:42.050Z,1510151322.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:42.438Z,1510151322.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:42.453Z,1510151322.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:42.839Z,1510151322.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:42.859Z,1510151322.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:43.238Z,1510151323.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:43.254Z,1510151323.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:43.641Z,1510151323.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:43.660Z,1510151323.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:44.039Z,1510151324.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:44.055Z,1510151324.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:44.434Z,1510151324.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:44.450Z,1510151324.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:44.834Z,1510151324.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:44.855Z,1510151324.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:45.239Z,1510151325.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:45.255Z,1510151325.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:45.634Z,1510151325.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:45.650Z,1510151325.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:46.034Z,1510151326.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:46.052Z,1510151326.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:46.439Z,1510151326.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:46.456Z,1510151326.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:46.838Z,1510151326.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:46.855Z,1510151326.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:47.239Z,1510151327.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:47.259Z,1510151327.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:47.639Z,1510151327.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:47.655Z,1510151327.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:48.038Z,1510151328.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:48.055Z,1510151328.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:48.439Z,1510151328.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:48.455Z,1510151328.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:48.838Z,1510151328.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:48.856Z,1510151328.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:49.239Z,1510151329.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:49.257Z,1510151329.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:49.638Z,1510151329.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:49.655Z,1510151329.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:50.038Z,1510151330.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:50.109Z,1510151330.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:50.438Z,1510151330.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:50.454Z,1510151330.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:50.837Z,1510151330.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:50.853Z,1510151330.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:51.238Z,1510151331.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:51.304Z,1510151331.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:51.640Z,1510151331.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:51.657Z,1510151331.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:52.041Z,1510151332.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:52.096Z,1510151332.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:52.441Z,1510151332.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:52.457Z,1510151332.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:52.837Z,1510151332.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:52.895Z,1510151332.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:53.242Z,1510151333.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:53.263Z,1510151333.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:53.644Z,1510151333.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:53.707Z,1510151333.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:54.038Z,1510151334.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:54.154Z,1510151334.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:54.439Z,1510151334.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:54.465Z,1510151334.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:54.844Z,1510151334.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:54.860Z,1510151334.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:55.237Z,1510151335.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:55.253Z,1510151335.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:55.643Z,1510151335.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:55.669Z,1510151335.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:56.031Z,1510151336.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:56.056Z,1510151336.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:56.431Z,1510151336.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:56.447Z,1510151336.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:56.835Z,1510151336.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:56.851Z,1510151336.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:57.231Z,1510151337.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:57.248Z,1510151337.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:57.631Z,1510151337.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:57.648Z,1510151337.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:58.031Z,1510151338.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:58.047Z,1510151338.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:58.431Z,1510151338.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:58.447Z,1510151338.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:58.831Z,1510151338.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:58.847Z,1510151338.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:59.231Z,1510151339.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:59.246Z,1510151339.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:28:59.631Z,1510151339.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:28:59.651Z,1510151339.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:00.035Z,1510151340.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:00.051Z,1510151340.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:00.438Z,1510151340.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:00.454Z,1510151340.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:00.834Z,1510151340.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:00.849Z,1510151340.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:01.234Z,1510151341.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:01.298Z,1510151341.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:01.638Z,1510151341.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:01.654Z,1510151341.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:02.038Z,1510151342.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:02.054Z,1510151342.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:02.437Z,1510151342.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:02.453Z,1510151342.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:02.838Z,1510151342.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:02.854Z,1510151342.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:03.241Z,1510151343.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:03.257Z,1510151343.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:03.637Z,1510151343.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:03.654Z,1510151343.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:04.041Z,1510151344.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:04.056Z,1510151344.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:04.436Z,1510151344.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:04.452Z,1510151344.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:04.815Z,1510151344.815 [NAL9602](INFO): Powering up NAL9602
2017-11-08T14:29:04.842Z,1510151344.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:04.859Z,1510151344.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:05.237Z,1510151345.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:05.259Z,1510151345.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:05.641Z,1510151345.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:05.657Z,1510151345.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:06.037Z,1510151346.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:06.054Z,1510151346.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:06.437Z,1510151346.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:06.459Z,1510151346.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:06.837Z,1510151346.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:06.853Z,1510151346.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:07.237Z,1510151347.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:07.254Z,1510151347.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:07.640Z,1510151347.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:07.657Z,1510151347.657 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:07.657Z,1510151347.657 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2017-11-08T14:29:07.657Z,1510151347.657 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T14:29:07.659Z,1510151347.659 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:07.659Z,1510151347.659 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22
2017-11-08T14:29:07.659Z,1510151347.659 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T14:29:07.661Z,1510151347.661 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:07.661Z,1510151347.661 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 22
2017-11-08T14:29:07.661Z,1510151347.661 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T14:29:07.765Z,1510151347.765 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T14:29:07.765Z,1510151347.765 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T14:29:07.765Z,1510151347.765 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T14:29:08.037Z,1510151348.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:08.133Z,1510151348.133 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T14:29:08.133Z,1510151348.133 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2017-11-08T14:29:08.134Z,1510151348.134 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T14:29:08.134Z,1510151348.134 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22
2017-11-08T14:29:08.134Z,1510151348.134 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T14:29:08.134Z,1510151348.134 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 22
2017-11-08T14:29:08.436Z,1510151348.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:08.452Z,1510151348.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T14:29:08.453Z,1510151348.453 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:29:08.453Z,1510151348.453 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:29:08.453Z,1510151348.453 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T14:29:08.454Z,1510151348.454 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:29:08.454Z,1510151348.454 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:29:08.455Z,1510151348.455 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T14:29:08.455Z,1510151348.455 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:29:08.455Z,1510151348.455 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:29:08.831Z,1510151348.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:08.864Z,1510151348.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T14:29:08.865Z,1510151348.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:09.235Z,1510151349.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:09.264Z,1510151349.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T14:29:09.265Z,1510151349.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:09.631Z,1510151349.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:09.659Z,1510151349.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T14:29:09.660Z,1510151349.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:10.034Z,1510151350.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:10.065Z,1510151350.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T14:29:10.066Z,1510151350.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:10.434Z,1510151350.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:10.465Z,1510151350.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T14:29:10.466Z,1510151350.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:10.835Z,1510151350.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:10.865Z,1510151350.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T14:29:10.866Z,1510151350.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:11.237Z,1510151351.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:11.265Z,1510151351.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T14:29:11.266Z,1510151351.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:11.631Z,1510151351.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:11.664Z,1510151351.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T14:29:11.665Z,1510151351.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:12.031Z,1510151352.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:12.086Z,1510151352.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T14:29:12.087Z,1510151352.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:12.434Z,1510151352.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:12.470Z,1510151352.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T14:29:12.471Z,1510151352.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:12.835Z,1510151352.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:12.865Z,1510151352.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T14:29:12.866Z,1510151352.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:13.235Z,1510151353.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:13.291Z,1510151353.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T14:29:13.292Z,1510151353.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:13.634Z,1510151353.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:13.663Z,1510151353.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T14:29:13.664Z,1510151353.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:14.034Z,1510151354.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:14.065Z,1510151354.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T14:29:14.066Z,1510151354.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:14.435Z,1510151354.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:14.487Z,1510151354.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T14:29:14.488Z,1510151354.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:14.835Z,1510151354.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:14.866Z,1510151354.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T14:29:14.868Z,1510151354.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:15.252Z,1510151355.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:15.318Z,1510151355.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T14:29:15.319Z,1510151355.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:15.618Z,1510151355.618 [NAL9602](INFO): NAL9602 initialized
2017-11-08T14:29:15.635Z,1510151355.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:15.673Z,1510151355.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T14:29:15.674Z,1510151355.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:16.035Z,1510151356.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:16.069Z,1510151356.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T14:29:16.070Z,1510151356.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:16.456Z,1510151356.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:16.475Z,1510151356.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T14:29:16.476Z,1510151356.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:16.856Z,1510151356.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:16.871Z,1510151356.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T14:29:16.873Z,1510151356.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:17.250Z,1510151357.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:17.270Z,1510151357.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T14:29:17.271Z,1510151357.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:17.636Z,1510151357.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:17.655Z,1510151357.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T14:29:17.656Z,1510151357.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:18.062Z,1510151358.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:18.095Z,1510151358.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T14:29:18.096Z,1510151358.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:18.449Z,1510151358.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:18.487Z,1510151358.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T14:29:18.488Z,1510151358.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:19.116Z,1510151359.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:19.132Z,1510151359.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2017-11-08T14:29:19.133Z,1510151359.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:19.251Z,1510151359.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:19.292Z,1510151359.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T14:29:19.293Z,1510151359.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:19.662Z,1510151359.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:19.699Z,1510151359.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T14:29:19.700Z,1510151359.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:20.061Z,1510151360.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:20.096Z,1510151360.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T14:29:20.098Z,1510151360.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:20.472Z,1510151360.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:20.489Z,1510151360.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T14:29:20.490Z,1510151360.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:20.847Z,1510151360.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:20.888Z,1510151360.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T14:29:20.893Z,1510151360.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:21.247Z,1510151361.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:21.263Z,1510151361.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T14:29:21.264Z,1510151361.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:21.651Z,1510151361.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:21.671Z,1510151361.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T14:29:21.672Z,1510151361.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:22.082Z,1510151362.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:22.102Z,1510151362.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T14:29:22.103Z,1510151362.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:22.450Z,1510151362.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:22.465Z,1510151362.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T14:29:22.466Z,1510151362.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:22.864Z,1510151362.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:22.900Z,1510151362.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T14:29:22.905Z,1510151362.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:23.589Z,1510151363.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:23.629Z,1510151363.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T14:29:23.630Z,1510151363.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:23.762Z,1510151363.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:23.778Z,1510151363.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T14:29:23.779Z,1510151363.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:24.182Z,1510151364.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:24.207Z,1510151364.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-08T14:29:24.209Z,1510151364.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:24.582Z,1510151364.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:24.606Z,1510151364.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-11-08T14:29:24.607Z,1510151364.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:24.986Z,1510151364.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:25.012Z,1510151365.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-08T14:29:25.013Z,1510151365.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:25.372Z,1510151365.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:25.388Z,1510151365.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T14:29:25.405Z,1510151365.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:25.772Z,1510151365.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:25.788Z,1510151365.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T14:29:25.789Z,1510151365.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:26.189Z,1510151366.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:26.217Z,1510151366.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-08T14:29:26.218Z,1510151366.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:26.582Z,1510151366.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:26.614Z,1510151366.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-08T14:29:26.615Z,1510151366.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:27.252Z,1510151367.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:27.268Z,1510151367.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T14:29:27.269Z,1510151367.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:27.380Z,1510151367.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:27.396Z,1510151367.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-08T14:29:27.397Z,1510151367.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:27.802Z,1510151367.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:27.835Z,1510151367.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:28.201Z,1510151368.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:28.226Z,1510151368.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:28.597Z,1510151368.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:28.636Z,1510151368.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:28.988Z,1510151368.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:29.004Z,1510151369.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:29.387Z,1510151369.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:29.403Z,1510151369.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:29.789Z,1510151369.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:29.805Z,1510151369.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:30.220Z,1510151370.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:30.236Z,1510151370.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:30.587Z,1510151370.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:30.603Z,1510151370.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:31.001Z,1510151371.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:31.038Z,1510151371.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:31.684Z,1510151371.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:31.704Z,1510151371.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:31.815Z,1510151371.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:31.845Z,1510151371.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:32.236Z,1510151372.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:32.252Z,1510151372.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:32.636Z,1510151372.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:32.652Z,1510151372.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:33.031Z,1510151373.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:33.048Z,1510151373.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:33.416Z,1510151373.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:33.442Z,1510151373.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:33.816Z,1510151373.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:33.842Z,1510151373.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:34.238Z,1510151374.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:34.255Z,1510151374.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:34.637Z,1510151374.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:34.653Z,1510151374.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:35.342Z,1510151375.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:35.358Z,1510151375.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:35.494Z,1510151375.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:35.563Z,1510151375.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:35.901Z,1510151375.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:35.937Z,1510151375.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:36.301Z,1510151376.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:36.334Z,1510151376.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:36.701Z,1510151376.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:36.718Z,1510151376.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:37.090Z,1510151377.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:37.106Z,1510151377.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:37.490Z,1510151377.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:37.506Z,1510151377.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:37.890Z,1510151377.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:37.907Z,1510151377.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:38.313Z,1510151378.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:38.340Z,1510151378.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:38.690Z,1510151378.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:38.698Z,1510151378.698 [BPC1](ERROR): Failed to receive battery data
2017-11-08T14:29:38.698Z,1510151378.698 [BPC1] Communications Fault, FailCount= 1
2017-11-08T14:29:38.698Z,1510151378.698 [BPC1](ERROR): Communications Fault
2017-11-08T14:29:38.708Z,1510151378.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:38.789Z,1510151378.789 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T14:29:39.101Z,1510151379.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:39.118Z,1510151379.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:39.781Z,1510151379.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:39.803Z,1510151379.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:39.905Z,1510151379.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:39.955Z,1510151379.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:40.033Z,1510151380.033 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T14:29:40.033Z,1510151380.033 [BPC1] No Fault, FailCount= 1
2017-11-08T14:29:40.322Z,1510151380.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:40.404Z,1510151380.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:40.721Z,1510151380.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:40.749Z,1510151380.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:41.122Z,1510151381.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:41.147Z,1510151381.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:41.512Z,1510151381.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:41.536Z,1510151381.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:41.912Z,1510151381.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:41.928Z,1510151381.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:42.340Z,1510151382.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:42.363Z,1510151382.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:42.725Z,1510151382.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:42.753Z,1510151382.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:43.402Z,1510151383.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:43.418Z,1510151383.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:43.531Z,1510151383.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:43.575Z,1510151383.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:43.948Z,1510151383.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:43.964Z,1510151383.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:44.347Z,1510151384.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:44.374Z,1510151384.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:44.748Z,1510151384.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:44.764Z,1510151384.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:45.131Z,1510151385.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:45.162Z,1510151385.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:45.527Z,1510151385.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:45.557Z,1510151385.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:45.932Z,1510151385.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:45.963Z,1510151385.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:46.354Z,1510151386.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:46.375Z,1510151386.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:46.727Z,1510151386.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:46.759Z,1510151386.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:47.152Z,1510151387.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:47.175Z,1510151387.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:47.826Z,1510151387.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:47.847Z,1510151387.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:47.961Z,1510151387.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:48.009Z,1510151388.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:48.382Z,1510151388.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:48.446Z,1510151388.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:48.781Z,1510151388.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:48.805Z,1510151388.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:49.193Z,1510151389.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:49.209Z,1510151389.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:49.571Z,1510151389.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:49.605Z,1510151389.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:49.968Z,1510151389.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:50.005Z,1510151390.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:50.400Z,1510151390.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:50.416Z,1510151390.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:50.792Z,1510151390.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:50.809Z,1510151390.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:51.458Z,1510151391.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:51.474Z,1510151391.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:51.600Z,1510151391.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:51.631Z,1510151391.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:52.010Z,1510151392.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:52.026Z,1510151392.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:52.409Z,1510151392.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:52.425Z,1510151392.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:52.809Z,1510151392.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:52.826Z,1510151392.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:53.202Z,1510151393.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:53.218Z,1510151393.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:53.601Z,1510151393.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:53.617Z,1510151393.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:54.017Z,1510151394.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:54.033Z,1510151394.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:54.405Z,1510151394.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:54.421Z,1510151394.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:54.801Z,1510151394.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:54.823Z,1510151394.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:55.211Z,1510151395.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:55.228Z,1510151395.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:55.896Z,1510151395.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:55.913Z,1510151395.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:56.031Z,1510151396.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:56.082Z,1510151396.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:56.452Z,1510151396.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:56.469Z,1510151396.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:56.852Z,1510151396.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:56.868Z,1510151396.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:57.247Z,1510151397.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:57.264Z,1510151397.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:57.632Z,1510151397.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:57.661Z,1510151397.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:58.063Z,1510151398.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:58.083Z,1510151398.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:58.448Z,1510151398.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:58.465Z,1510151398.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:59.126Z,1510151399.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:59.161Z,1510151399.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:59.275Z,1510151399.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:59.305Z,1510151399.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:29:59.683Z,1510151399.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:29:59.698Z,1510151399.698 [PNI_TCM](ERROR): CRC does not match. Expected:0x20875 got:0x34685
2017-11-08T14:29:59.763Z,1510151399.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:00.077Z,1510151400.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:00.120Z,1510151400.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:00.482Z,1510151400.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:00.531Z,1510151400.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:00.871Z,1510151400.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:00.891Z,1510151400.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:01.266Z,1510151401.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:01.315Z,1510151401.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:01.672Z,1510151401.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:01.718Z,1510151401.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:02.100Z,1510151402.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:02.117Z,1510151402.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:02.478Z,1510151402.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:02.513Z,1510151402.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:03.160Z,1510151403.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:03.176Z,1510151403.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:03.287Z,1510151403.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:03.326Z,1510151403.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:03.706Z,1510151403.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:03.725Z,1510151403.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:04.108Z,1510151404.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:04.131Z,1510151404.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:04.507Z,1510151404.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:04.523Z,1510151404.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:04.883Z,1510151404.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:04.914Z,1510151404.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:05.288Z,1510151405.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:05.316Z,1510151405.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:05.690Z,1510151405.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:05.721Z,1510151405.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:06.115Z,1510151406.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:06.130Z,1510151406.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:06.487Z,1510151406.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:06.531Z,1510151406.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:06.888Z,1510151406.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:06.906Z,1510151406.906 [PNI_TCM](ERROR): CRC does not match. Expected:0x15998 got:0x1857
2017-11-08T14:30:06.935Z,1510151406.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:07.286Z,1510151407.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:07.315Z,1510151407.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:07.689Z,1510151407.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:07.723Z,1510151407.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:08.091Z,1510151408.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:08.122Z,1510151408.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:08.483Z,1510151408.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:08.513Z,1510151408.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:08.890Z,1510151408.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:08.905Z,1510151408.905 [PNI_TCM](ERROR): CRC does not match. Expected:0x52738 got:0x6977
2017-11-08T14:30:08.931Z,1510151408.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:09.289Z,1510151409.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:09.344Z,1510151409.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:09.687Z,1510151409.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:09.729Z,1510151409.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:10.088Z,1510151410.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:10.117Z,1510151410.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:10.489Z,1510151410.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:10.522Z,1510151410.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:10.885Z,1510151410.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:10.918Z,1510151410.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:11.287Z,1510151411.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:11.331Z,1510151411.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:11.702Z,1510151411.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:11.708Z,1510151411.708 [PNI_TCM](ERROR): CRC does not match. Expected:0x53444 got:0x32768
2017-11-08T14:30:11.736Z,1510151411.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:12.106Z,1510151412.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:12.122Z,1510151412.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:12.785Z,1510151412.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:12.815Z,1510151412.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:12.931Z,1510151412.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:12.971Z,1510151412.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:13.353Z,1510151413.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:13.370Z,1510151413.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:13.752Z,1510151413.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:13.768Z,1510151413.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:14.142Z,1510151414.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:14.172Z,1510151414.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:14.531Z,1510151414.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:14.563Z,1510151414.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:14.932Z,1510151414.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:14.964Z,1510151414.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:15.360Z,1510151415.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:15.377Z,1510151415.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:15.735Z,1510151415.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:15.751Z,1510151415.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:16.131Z,1510151416.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:16.148Z,1510151416.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:16.546Z,1510151416.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:16.573Z,1510151416.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:17.243Z,1510151417.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:17.274Z,1510151417.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:17.388Z,1510151417.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:17.404Z,1510151417.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:17.806Z,1510151417.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:17.836Z,1510151417.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:18.200Z,1510151418.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:18.235Z,1510151418.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:18.606Z,1510151418.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:18.637Z,1510151418.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:18.995Z,1510151418.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:19.023Z,1510151419.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:19.388Z,1510151419.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:19.403Z,1510151419.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:19.795Z,1510151419.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:19.837Z,1510151419.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:20.224Z,1510151420.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:20.280Z,1510151420.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:20.605Z,1510151420.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:20.639Z,1510151420.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:21.284Z,1510151421.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:21.351Z,1510151421.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:21.463Z,1510151421.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:21.505Z,1510151421.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:21.884Z,1510151421.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:21.900Z,1510151421.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:22.286Z,1510151422.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:22.340Z,1510151422.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:22.687Z,1510151422.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:22.711Z,1510151422.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:23.063Z,1510151423.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:23.112Z,1510151423.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:23.474Z,1510151423.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:23.490Z,1510151423.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:23.874Z,1510151423.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:23.896Z,1510151423.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:24.288Z,1510151424.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:24.304Z,1510151424.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:24.687Z,1510151424.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:24.708Z,1510151424.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:25.362Z,1510151425.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:25.383Z,1510151425.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:25.497Z,1510151425.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:25.548Z,1510151425.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:25.924Z,1510151425.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:25.940Z,1510151425.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:26.324Z,1510151426.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:26.340Z,1510151426.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:26.713Z,1510151426.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:26.741Z,1510151426.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:27.107Z,1510151427.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:27.137Z,1510151427.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:27.503Z,1510151427.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:27.540Z,1510151427.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:27.904Z,1510151427.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:27.932Z,1510151427.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:28.336Z,1510151428.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:28.352Z,1510151428.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:28.717Z,1510151428.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:28.742Z,1510151428.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:29.385Z,1510151429.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:29.407Z,1510151429.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:29.519Z,1510151429.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:29.567Z,1510151429.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:29.935Z,1510151429.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:29.952Z,1510151429.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:30.336Z,1510151430.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:30.352Z,1510151430.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:30.739Z,1510151430.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:30.763Z,1510151430.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:31.115Z,1510151431.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:31.165Z,1510151431.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:31.519Z,1510151431.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:31.545Z,1510151431.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:31.916Z,1510151431.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:31.950Z,1510151431.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:32.342Z,1510151432.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:32.358Z,1510151432.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:32.741Z,1510151432.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:32.757Z,1510151432.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:33.414Z,1510151433.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:33.436Z,1510151433.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:33.549Z,1510151433.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:33.599Z,1510151433.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:33.977Z,1510151433.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:33.993Z,1510151433.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:34.376Z,1510151434.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:34.392Z,1510151434.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:34.762Z,1510151434.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:34.787Z,1510151434.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:35.156Z,1510151435.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:35.192Z,1510151435.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:35.556Z,1510151435.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:35.588Z,1510151435.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:35.952Z,1510151435.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:35.968Z,1510151435.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:36.388Z,1510151436.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:36.404Z,1510151436.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:36.768Z,1510151436.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:36.799Z,1510151436.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:37.437Z,1510151437.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:37.453Z,1510151437.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:37.560Z,1510151437.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:37.607Z,1510151437.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:37.981Z,1510151437.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:37.997Z,1510151437.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:38.369Z,1510151438.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:38.403Z,1510151438.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:38.784Z,1510151438.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:38.801Z,1510151438.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:39.161Z,1510151439.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:39.197Z,1510151439.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:39.560Z,1510151439.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:39.576Z,1510151439.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:39.960Z,1510151439.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:39.977Z,1510151439.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:40.396Z,1510151440.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:40.413Z,1510151440.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:40.774Z,1510151440.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:40.800Z,1510151440.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:41.490Z,1510151441.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:41.506Z,1510151441.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:41.619Z,1510151441.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:41.675Z,1510151441.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:42.036Z,1510151442.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:42.053Z,1510151442.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:42.440Z,1510151442.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:42.463Z,1510151442.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:42.839Z,1510151442.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:42.904Z,1510151442.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:43.219Z,1510151443.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:43.248Z,1510151443.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:43.620Z,1510151443.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:43.636Z,1510151443.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:44.052Z,1510151444.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:44.111Z,1510151444.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:44.420Z,1510151444.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:44.436Z,1510151444.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:44.820Z,1510151444.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:44.867Z,1510151444.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:45.234Z,1510151445.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:45.267Z,1510151445.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:45.918Z,1510151445.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:45.934Z,1510151445.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:46.042Z,1510151446.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:46.080Z,1510151446.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:46.467Z,1510151446.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:46.487Z,1510151446.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:46.866Z,1510151446.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:46.882Z,1510151446.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:47.268Z,1510151447.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:47.288Z,1510151447.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:47.651Z,1510151447.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:47.679Z,1510151447.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:48.048Z,1510151448.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:48.073Z,1510151448.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:48.443Z,1510151448.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:48.479Z,1510151448.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:48.848Z,1510151448.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:48.874Z,1510151448.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:49.273Z,1510151449.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:49.290Z,1510151449.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:49.665Z,1510151449.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:49.717Z,1510151449.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:50.346Z,1510151450.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:50.375Z,1510151450.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:50.493Z,1510151450.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:50.533Z,1510151450.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:50.917Z,1510151450.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:50.933Z,1510151450.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:51.308Z,1510151451.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:51.340Z,1510151451.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:51.699Z,1510151451.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:51.731Z,1510151451.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:52.095Z,1510151452.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:52.122Z,1510151452.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:52.496Z,1510151452.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:52.512Z,1510151452.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:52.893Z,1510151452.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:52.952Z,1510151452.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:53.328Z,1510151453.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:53.335Z,1510151453.335 [PNI_TCM](ERROR): CRC does not match. Expected:0x16590 got:0x16248
2017-11-08T14:30:53.357Z,1510151453.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:53.694Z,1510151453.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:53.711Z,1510151453.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:54.110Z,1510151454.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:54.135Z,1510151454.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:54.780Z,1510151454.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:54.796Z,1510151454.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:54.910Z,1510151454.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:54.942Z,1510151454.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:55.324Z,1510151455.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:55.341Z,1510151455.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:55.726Z,1510151455.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:55.741Z,1510151455.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:56.127Z,1510151456.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:56.147Z,1510151456.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:56.506Z,1510151456.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:56.538Z,1510151456.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:56.905Z,1510151456.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:56.920Z,1510151456.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:57.336Z,1510151457.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:57.352Z,1510151457.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:57.718Z,1510151457.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:57.756Z,1510151457.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:58.425Z,1510151458.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:58.448Z,1510151458.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:58.563Z,1510151458.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:58.580Z,1510151458.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:58.974Z,1510151458.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:59.007Z,1510151459.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:59.377Z,1510151459.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:59.405Z,1510151459.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:30:59.778Z,1510151459.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:30:59.804Z,1510151459.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:00.164Z,1510151460.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:00.181Z,1510151460.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:00.562Z,1510151460.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:00.579Z,1510151460.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:00.967Z,1510151460.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:00.993Z,1510151460.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:01.393Z,1510151461.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:01.410Z,1510151461.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:01.767Z,1510151461.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:01.784Z,1510151461.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:02.174Z,1510151462.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:02.208Z,1510151462.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:02.856Z,1510151462.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:02.879Z,1510151462.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:03.010Z,1510151463.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:03.026Z,1510151463.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:03.418Z,1510151463.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:03.434Z,1510151463.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:03.817Z,1510151463.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:03.876Z,1510151463.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:04.218Z,1510151464.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:04.235Z,1510151464.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:04.611Z,1510151464.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:04.627Z,1510151464.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:05.026Z,1510151465.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:05.085Z,1510151465.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:05.418Z,1510151465.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:05.435Z,1510151465.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:06.098Z,1510151466.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:06.157Z,1510151466.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:06.279Z,1510151466.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:06.323Z,1510151466.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:06.704Z,1510151466.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:06.758Z,1510151466.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:07.100Z,1510151467.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:07.117Z,1510151467.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:07.489Z,1510151467.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:07.514Z,1510151467.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:07.883Z,1510151467.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:07.913Z,1510151467.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:08.283Z,1510151468.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:08.313Z,1510151468.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:08.680Z,1510151468.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:08.708Z,1510151468.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:09.112Z,1510151469.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:09.128Z,1510151469.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:09.480Z,1510151469.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:09.513Z,1510151469.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:09.893Z,1510151469.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:09.921Z,1510151469.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:10.568Z,1510151470.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:10.585Z,1510151470.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:10.692Z,1510151470.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:10.727Z,1510151470.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:11.116Z,1510151471.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:11.132Z,1510151471.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:11.512Z,1510151471.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:11.528Z,1510151471.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:11.916Z,1510151471.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:11.932Z,1510151471.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:12.296Z,1510151472.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:12.321Z,1510151472.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:12.696Z,1510151472.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:12.722Z,1510151472.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:13.122Z,1510151473.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:13.144Z,1510151473.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:13.515Z,1510151473.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:13.535Z,1510151473.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:14.174Z,1510151474.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:14.190Z,1510151474.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:14.326Z,1510151474.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:14.367Z,1510151474.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:14.727Z,1510151474.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:14.743Z,1510151474.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:15.126Z,1510151475.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:15.167Z,1510151475.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:15.527Z,1510151475.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:15.543Z,1510151475.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:15.921Z,1510151475.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:15.938Z,1510151475.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:16.318Z,1510151476.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:16.340Z,1510151476.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:16.722Z,1510151476.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:16.739Z,1510151476.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:17.137Z,1510151477.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:17.171Z,1510151477.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:17.522Z,1510151477.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:17.537Z,1510151477.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:17.929Z,1510151477.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:17.952Z,1510151477.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:18.617Z,1510151478.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:18.640Z,1510151478.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:18.745Z,1510151478.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:18.777Z,1510151478.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:19.173Z,1510151479.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:19.189Z,1510151479.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:19.568Z,1510151479.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:19.591Z,1510151479.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:19.973Z,1510151479.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:19.989Z,1510151479.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:20.351Z,1510151480.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:20.378Z,1510151480.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:20.752Z,1510151480.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:20.776Z,1510151480.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:21.179Z,1510151481.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:21.196Z,1510151481.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:21.569Z,1510151481.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:21.604Z,1510151481.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:22.234Z,1510151482.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:22.250Z,1510151482.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:22.388Z,1510151482.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:22.428Z,1510151482.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:22.799Z,1510151482.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:22.821Z,1510151482.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:23.196Z,1510151483.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:23.222Z,1510151483.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:23.601Z,1510151483.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:23.632Z,1510151483.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:23.986Z,1510151483.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:24.003Z,1510151484.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:24.384Z,1510151484.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:24.420Z,1510151484.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:24.786Z,1510151484.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:24.803Z,1510151484.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:25.210Z,1510151485.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:25.234Z,1510151485.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:25.586Z,1510151485.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:25.602Z,1510151485.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:25.997Z,1510151485.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:26.073Z,1510151486.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:26.721Z,1510151486.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:26.738Z,1510151486.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:26.849Z,1510151486.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:26.900Z,1510151486.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:27.268Z,1510151487.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:27.317Z,1510151487.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:27.672Z,1510151487.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:27.704Z,1510151487.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:28.066Z,1510151488.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:28.111Z,1510151488.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:28.455Z,1510151488.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:28.502Z,1510151488.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:28.856Z,1510151488.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:28.889Z,1510151488.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:29.287Z,1510151489.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:29.347Z,1510151489.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:29.674Z,1510151489.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:29.719Z,1510151489.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:30.350Z,1510151490.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:30.366Z,1510151490.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:30.469Z,1510151490.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:30.504Z,1510151490.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:30.898Z,1510151490.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:30.913Z,1510151490.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:31.298Z,1510151491.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:31.317Z,1510151491.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:31.689Z,1510151491.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:31.708Z,1510151491.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:32.071Z,1510151492.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:32.108Z,1510151492.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:32.478Z,1510151492.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:32.493Z,1510151492.493 [PNI_TCM](ERROR): CRC does not match. Expected:0x32531 got:0x49167
2017-11-08T14:31:32.519Z,1510151492.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:32.872Z,1510151492.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:32.905Z,1510151492.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:33.305Z,1510151493.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:33.321Z,1510151493.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:33.675Z,1510151493.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:33.704Z,1510151493.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:34.096Z,1510151494.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:34.113Z,1510151494.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:34.762Z,1510151494.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:34.778Z,1510151494.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:34.919Z,1510151494.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:34.955Z,1510151494.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:35.337Z,1510151495.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:35.353Z,1510151495.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:35.737Z,1510151495.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:35.753Z,1510151495.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:36.144Z,1510151496.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:36.161Z,1510151496.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:36.523Z,1510151496.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:36.552Z,1510151496.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:36.920Z,1510151496.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:36.951Z,1510151496.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:37.350Z,1510151497.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:37.407Z,1510151497.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:37.743Z,1510151497.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:37.761Z,1510151497.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:38.441Z,1510151498.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:38.457Z,1510151498.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:38.568Z,1510151498.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:38.605Z,1510151498.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:38.979Z,1510151498.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:39.005Z,1510151499.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:39.383Z,1510151499.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:39.415Z,1510151499.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:39.783Z,1510151499.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:39.817Z,1510151499.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:40.163Z,1510151500.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:40.180Z,1510151500.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:40.567Z,1510151500.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:40.584Z,1510151500.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:40.967Z,1510151500.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:41.011Z,1510151501.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:41.400Z,1510151501.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:41.417Z,1510151501.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:41.767Z,1510151501.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:41.784Z,1510151501.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:42.186Z,1510151502.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:42.213Z,1510151502.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:42.859Z,1510151502.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:42.875Z,1510151502.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:42.977Z,1510151502.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:43.002Z,1510151503.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:43.404Z,1510151503.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:43.422Z,1510151503.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:43.804Z,1510151503.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:43.820Z,1510151503.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:44.205Z,1510151504.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:44.228Z,1510151504.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:44.585Z,1510151504.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:44.609Z,1510151504.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:45.012Z,1510151505.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:45.031Z,1510151505.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:45.397Z,1510151505.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:45.436Z,1510151505.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:46.075Z,1510151506.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:46.099Z,1510151506.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:46.235Z,1510151506.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:46.272Z,1510151506.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:46.658Z,1510151506.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:46.674Z,1510151506.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:47.056Z,1510151507.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:47.073Z,1510151507.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:47.445Z,1510151507.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:47.476Z,1510151507.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:47.835Z,1510151507.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:47.891Z,1510151507.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:48.235Z,1510151508.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:48.252Z,1510151508.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:48.636Z,1510151508.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:48.655Z,1510151508.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:49.069Z,1510151509.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:49.086Z,1510151509.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:49.439Z,1510151509.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:49.510Z,1510151509.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:49.845Z,1510151509.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:49.862Z,1510151509.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:50.541Z,1510151510.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:50.596Z,1510151510.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:50.708Z,1510151510.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:50.747Z,1510151510.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:51.118Z,1510151511.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:51.181Z,1510151511.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:51.518Z,1510151511.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:51.543Z,1510151511.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:51.926Z,1510151511.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:51.948Z,1510151511.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:52.307Z,1510151512.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:52.346Z,1510151512.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:52.703Z,1510151512.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:52.719Z,1510151512.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:53.140Z,1510151513.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:53.156Z,1510151513.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:53.520Z,1510151513.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:53.552Z,1510151513.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:54.188Z,1510151514.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:54.205Z,1510151514.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:54.315Z,1510151514.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:54.363Z,1510151514.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:54.731Z,1510151514.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:54.748Z,1510151514.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:55.132Z,1510151515.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:55.149Z,1510151515.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:55.536Z,1510151515.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:55.553Z,1510151515.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:55.915Z,1510151515.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:55.952Z,1510151515.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:56.311Z,1510151516.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:56.353Z,1510151516.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:56.716Z,1510151516.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:56.752Z,1510151516.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:57.142Z,1510151517.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:57.159Z,1510151517.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:57.515Z,1510151517.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:57.531Z,1510151517.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:57.929Z,1510151517.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:57.956Z,1510151517.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:58.610Z,1510151518.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:58.625Z,1510151518.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:58.729Z,1510151518.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:58.763Z,1510151518.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:59.155Z,1510151519.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:59.211Z,1510151519.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:59.555Z,1510151519.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:59.571Z,1510151519.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:31:59.956Z,1510151519.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:31:59.973Z,1510151519.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:00.335Z,1510151520.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:00.361Z,1510151520.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:00.736Z,1510151520.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:00.760Z,1510151520.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:01.161Z,1510151521.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:01.178Z,1510151521.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:01.556Z,1510151521.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:01.573Z,1510151521.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:02.221Z,1510151522.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:02.254Z,1510151522.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:02.371Z,1510151522.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:02.419Z,1510151522.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:02.786Z,1510151522.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:02.818Z,1510151522.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:03.185Z,1510151523.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:03.210Z,1510151523.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:03.586Z,1510151523.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:03.615Z,1510151523.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:03.972Z,1510151523.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:03.988Z,1510151523.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:04.371Z,1510151524.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:04.428Z,1510151524.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:04.772Z,1510151524.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:04.789Z,1510151524.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:05.203Z,1510151525.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:05.220Z,1510151525.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:05.567Z,1510151525.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:05.583Z,1510151525.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:05.985Z,1510151525.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:06.014Z,1510151526.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:06.690Z,1510151526.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:06.719Z,1510151526.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:06.824Z,1510151526.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:06.870Z,1510151526.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:07.252Z,1510151527.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:07.268Z,1510151527.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:07.651Z,1510151527.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:07.669Z,1510151527.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:08.037Z,1510151528.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:08.070Z,1510151528.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:08.431Z,1510151528.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:08.462Z,1510151528.462 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:08.462Z,1510151528.462 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2017-11-08T14:32:08.462Z,1510151528.462 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T14:32:08.464Z,1510151528.464 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:08.464Z,1510151528.464 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23
2017-11-08T14:32:08.464Z,1510151528.464 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T14:32:08.466Z,1510151528.466 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:08.466Z,1510151528.466 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 23
2017-11-08T14:32:08.466Z,1510151528.466 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T14:32:08.549Z,1510151528.549 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T14:32:08.549Z,1510151528.549 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T14:32:08.549Z,1510151528.549 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T14:32:08.832Z,1510151528.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:08.945Z,1510151528.945 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T14:32:08.945Z,1510151528.945 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2017-11-08T14:32:08.945Z,1510151528.945 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T14:32:08.945Z,1510151528.945 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23
2017-11-08T14:32:08.946Z,1510151528.946 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T14:32:08.946Z,1510151528.946 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 23
2017-11-08T14:32:09.256Z,1510151529.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:09.275Z,1510151529.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T14:32:09.276Z,1510151529.276 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:32:09.277Z,1510151529.277 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:32:09.277Z,1510151529.277 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T14:32:09.277Z,1510151529.277 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:32:09.278Z,1510151529.278 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:32:09.278Z,1510151529.278 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T14:32:09.278Z,1510151529.278 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:32:09.279Z,1510151529.279 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:32:09.644Z,1510151529.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:09.674Z,1510151529.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T14:32:09.675Z,1510151529.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:10.334Z,1510151530.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:10.350Z,1510151530.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2017-11-08T14:32:10.351Z,1510151530.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:10.483Z,1510151530.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:10.500Z,1510151530.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T14:32:10.501Z,1510151530.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:10.897Z,1510151530.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:10.931Z,1510151530.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2017-11-08T14:32:10.932Z,1510151530.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:11.304Z,1510151531.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:11.355Z,1510151531.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2017-11-08T14:32:11.356Z,1510151531.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:11.699Z,1510151531.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:11.749Z,1510151531.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2017-11-08T14:32:11.753Z,1510151531.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:12.094Z,1510151532.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:12.134Z,1510151532.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2017-11-08T14:32:12.135Z,1510151532.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:12.493Z,1510151532.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:12.536Z,1510151532.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-08T14:32:12.537Z,1510151532.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:12.888Z,1510151532.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:12.948Z,1510151532.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-08T14:32:12.949Z,1510151532.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:13.324Z,1510151533.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:13.347Z,1510151533.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-08T14:32:13.348Z,1510151533.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:13.693Z,1510151533.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:13.708Z,1510151533.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T14:32:13.709Z,1510151533.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:14.101Z,1510151534.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:14.133Z,1510151534.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-08T14:32:14.134Z,1510151534.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:14.776Z,1510151534.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:14.791Z,1510151534.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2017-11-08T14:32:14.792Z,1510151534.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:14.906Z,1510151534.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:14.941Z,1510151534.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-08T14:32:14.942Z,1510151534.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:15.318Z,1510151535.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:15.343Z,1510151535.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T14:32:15.344Z,1510151535.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:15.717Z,1510151535.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:15.744Z,1510151535.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-08T14:32:15.745Z,1510151535.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:16.119Z,1510151536.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:16.147Z,1510151536.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T14:32:16.148Z,1510151536.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:16.506Z,1510151536.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:16.522Z,1510151536.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T14:32:16.523Z,1510151536.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:16.908Z,1510151536.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:16.924Z,1510151536.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T14:32:16.925Z,1510151536.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:17.334Z,1510151537.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:17.350Z,1510151537.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T14:32:17.351Z,1510151537.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:17.719Z,1510151537.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:17.748Z,1510151537.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T14:32:17.749Z,1510151537.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:18.396Z,1510151538.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:18.417Z,1510151538.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T14:32:18.418Z,1510151538.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:18.562Z,1510151538.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:18.578Z,1510151538.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T14:32:18.579Z,1510151538.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:18.970Z,1510151538.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:19.004Z,1510151539.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T14:32:19.005Z,1510151539.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:19.370Z,1510151539.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:19.407Z,1510151539.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T14:32:19.408Z,1510151539.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:19.770Z,1510151539.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:19.804Z,1510151539.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T14:32:19.805Z,1510151539.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:20.158Z,1510151540.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:20.175Z,1510151540.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T14:32:20.176Z,1510151540.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:20.554Z,1510151540.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:20.570Z,1510151540.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T14:32:20.571Z,1510151540.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:20.959Z,1510151540.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:21.011Z,1510151541.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T14:32:21.012Z,1510151541.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:21.382Z,1510151541.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:21.406Z,1510151541.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T14:32:21.407Z,1510151541.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:21.759Z,1510151541.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:21.775Z,1510151541.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T14:32:21.776Z,1510151541.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:22.170Z,1510151542.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:22.204Z,1510151542.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T14:32:22.205Z,1510151542.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:22.848Z,1510151542.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:22.864Z,1510151542.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T14:32:22.865Z,1510151542.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:22.972Z,1510151542.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:22.995Z,1510151542.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T14:32:22.996Z,1510151542.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:23.382Z,1510151543.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:23.398Z,1510151543.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T14:32:23.399Z,1510151543.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:23.782Z,1510151543.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:23.797Z,1510151543.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T14:32:23.798Z,1510151543.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:24.178Z,1510151544.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:24.194Z,1510151544.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T14:32:24.194Z,1510151544.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:24.572Z,1510151544.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:24.603Z,1510151544.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T14:32:24.604Z,1510151544.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:24.975Z,1510151544.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:24.990Z,1510151544.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T14:32:24.991Z,1510151544.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:25.401Z,1510151545.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:25.429Z,1510151545.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-11-08T14:32:25.430Z,1510151545.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:25.789Z,1510151545.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:25.805Z,1510151545.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T14:32:25.806Z,1510151545.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:26.449Z,1510151546.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:26.465Z,1510151546.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T14:32:26.466Z,1510151546.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:26.602Z,1510151546.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:26.626Z,1510151546.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-08T14:32:26.627Z,1510151546.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:27.018Z,1510151547.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:27.049Z,1510151547.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-08T14:32:27.050Z,1510151547.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:27.417Z,1510151547.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:27.441Z,1510151547.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-08T14:32:27.442Z,1510151547.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:27.817Z,1510151547.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:27.847Z,1510151547.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-08T14:32:27.848Z,1510151547.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:28.203Z,1510151548.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:28.243Z,1510151548.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-08T14:32:28.244Z,1510151548.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:28.608Z,1510151548.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:28.645Z,1510151548.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:29.036Z,1510151549.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:29.052Z,1510151549.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:29.403Z,1510151549.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:29.420Z,1510151549.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:29.807Z,1510151549.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:29.847Z,1510151549.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:30.219Z,1510151550.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:30.263Z,1510151550.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:30.902Z,1510151550.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:30.919Z,1510151550.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:31.017Z,1510151551.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:31.063Z,1510151551.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:31.447Z,1510151551.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:31.467Z,1510151551.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:31.844Z,1510151551.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:31.860Z,1510151551.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:32.243Z,1510151552.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:32.260Z,1510151552.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:32.625Z,1510151552.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:32.654Z,1510151552.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:33.051Z,1510151553.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:33.126Z,1510151553.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:33.444Z,1510151553.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:33.507Z,1510151553.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:34.109Z,1510151554.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:34.125Z,1510151554.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:34.225Z,1510151554.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:34.267Z,1510151554.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:34.649Z,1510151554.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:34.705Z,1510151554.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:35.054Z,1510151555.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:35.069Z,1510151555.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:35.445Z,1510151555.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:35.507Z,1510151555.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:35.831Z,1510151555.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:35.863Z,1510151555.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:36.246Z,1510151556.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:36.266Z,1510151556.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:36.632Z,1510151556.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:36.657Z,1510151556.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:37.058Z,1510151557.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:37.075Z,1510151557.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:37.431Z,1510151557.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:37.456Z,1510151557.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:37.844Z,1510151557.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:37.867Z,1510151557.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:38.526Z,1510151558.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:38.554Z,1510151558.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:38.665Z,1510151558.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:38.714Z,1510151558.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:39.087Z,1510151559.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:39.118Z,1510151559.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:39.486Z,1510151559.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:39.510Z,1510151559.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:39.886Z,1510151559.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:39.913Z,1510151559.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:40.271Z,1510151560.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:40.313Z,1510151560.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:40.672Z,1510151560.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:40.710Z,1510151560.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:41.101Z,1510151561.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:41.117Z,1510151561.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:41.486Z,1510151561.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:41.518Z,1510151561.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:42.154Z,1510151562.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:42.171Z,1510151562.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:42.269Z,1510151562.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:42.321Z,1510151562.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:42.696Z,1510151562.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:42.712Z,1510151562.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:43.096Z,1510151563.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:43.112Z,1510151563.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:43.486Z,1510151563.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:43.547Z,1510151563.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:43.876Z,1510151563.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:43.908Z,1510151563.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:44.275Z,1510151564.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:44.291Z,1510151564.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:44.676Z,1510151564.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:44.705Z,1510151564.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:45.104Z,1510151565.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:45.121Z,1510151565.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:45.475Z,1510151565.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:45.491Z,1510151565.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:45.889Z,1510151565.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:45.925Z,1510151565.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:46.574Z,1510151566.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:46.596Z,1510151566.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:46.730Z,1510151566.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:46.771Z,1510151566.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:47.137Z,1510151567.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:47.170Z,1510151567.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:47.533Z,1510151567.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:47.566Z,1510151567.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:47.657Z,1510151567.657 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T14:32:47.937Z,1510151567.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:47.966Z,1510151567.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:48.326Z,1510151568.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:48.342Z,1510151568.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:48.727Z,1510151568.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:48.748Z,1510151568.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:49.149Z,1510151569.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:49.175Z,1510151569.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:49.541Z,1510151569.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:49.577Z,1510151569.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:50.224Z,1510151570.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:50.240Z,1510151570.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:50.351Z,1510151570.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:50.403Z,1510151570.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:50.771Z,1510151570.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:50.801Z,1510151570.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:51.172Z,1510151571.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:51.195Z,1510151571.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:51.567Z,1510151571.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:51.584Z,1510151571.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:51.955Z,1510151571.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:51.981Z,1510151571.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:52.352Z,1510151572.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:52.386Z,1510151572.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:52.752Z,1510151572.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:52.791Z,1510151572.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:53.182Z,1510151573.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:53.198Z,1510151573.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:53.552Z,1510151573.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:53.577Z,1510151573.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:53.973Z,1510151573.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:53.996Z,1510151573.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:54.646Z,1510151574.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:54.674Z,1510151574.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:54.791Z,1510151574.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:54.831Z,1510151574.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:55.216Z,1510151575.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:55.276Z,1510151575.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:55.601Z,1510151575.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:55.650Z,1510151575.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:56.002Z,1510151576.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:56.034Z,1510151576.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:56.396Z,1510151576.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:56.444Z,1510151576.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:56.796Z,1510151576.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:56.812Z,1510151576.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:57.214Z,1510151577.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:57.283Z,1510151577.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:57.609Z,1510151577.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:57.643Z,1510151577.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:58.283Z,1510151578.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:58.299Z,1510151578.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:58.400Z,1510151578.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:58.447Z,1510151578.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:58.814Z,1510151578.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:58.846Z,1510151578.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:59.225Z,1510151579.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:59.241Z,1510151579.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:32:59.614Z,1510151579.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:32:59.646Z,1510151579.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:00.003Z,1510151580.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:00.036Z,1510151580.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:00.403Z,1510151580.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:00.419Z,1510151580.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:00.804Z,1510151580.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:00.853Z,1510151580.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:01.229Z,1510151581.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:01.245Z,1510151581.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:01.603Z,1510151581.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:01.628Z,1510151581.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:02.017Z,1510151582.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:02.039Z,1510151582.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:02.702Z,1510151582.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:02.724Z,1510151582.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:02.838Z,1510151582.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:02.891Z,1510151582.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:03.254Z,1510151583.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:03.284Z,1510151583.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:03.659Z,1510151583.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:03.688Z,1510151583.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:04.054Z,1510151584.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:04.081Z,1510151584.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:04.443Z,1510151584.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:04.460Z,1510151584.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:04.839Z,1510151584.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:04.859Z,1510151584.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:05.281Z,1510151585.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:05.339Z,1510151585.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:05.657Z,1510151585.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:05.691Z,1510151585.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:06.331Z,1510151586.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:06.347Z,1510151586.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:06.453Z,1510151586.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:06.499Z,1510151586.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:06.878Z,1510151586.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:06.909Z,1510151586.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:07.279Z,1510151587.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:07.308Z,1510151587.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:07.677Z,1510151587.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:07.698Z,1510151587.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:08.059Z,1510151588.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:08.098Z,1510151588.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:08.459Z,1510151588.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:08.496Z,1510151588.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:08.860Z,1510151588.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:08.891Z,1510151588.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:09.288Z,1510151589.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:09.307Z,1510151589.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:09.659Z,1510151589.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:09.697Z,1510151589.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:10.071Z,1510151590.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:10.109Z,1510151590.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:10.758Z,1510151590.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:10.782Z,1510151590.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:10.923Z,1510151590.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:10.955Z,1510151590.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:11.345Z,1510151591.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:11.361Z,1510151591.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:11.745Z,1510151591.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:11.761Z,1510151591.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:12.144Z,1510151592.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:12.160Z,1510151592.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:12.523Z,1510151592.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:12.555Z,1510151592.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:12.920Z,1510151592.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:12.953Z,1510151592.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:13.350Z,1510151593.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:13.372Z,1510151593.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:13.747Z,1510151593.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:13.764Z,1510151593.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:14.452Z,1510151594.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:14.468Z,1510151594.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:14.580Z,1510151594.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:14.611Z,1510151594.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:15.001Z,1510151595.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:15.017Z,1510151595.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:15.401Z,1510151595.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:15.417Z,1510151595.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:15.797Z,1510151595.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:15.813Z,1510151595.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:16.181Z,1510151596.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:16.207Z,1510151596.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:16.580Z,1510151596.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:16.607Z,1510151596.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:16.981Z,1510151596.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:17.055Z,1510151597.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:17.412Z,1510151597.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:17.478Z,1510151597.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:17.776Z,1510151597.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:17.811Z,1510151597.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:18.197Z,1510151598.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:18.214Z,1510151598.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:18.865Z,1510151598.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:18.908Z,1510151598.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:19.025Z,1510151599.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:19.049Z,1510151599.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:19.452Z,1510151599.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:19.510Z,1510151599.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:19.853Z,1510151599.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:19.869Z,1510151599.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:20.238Z,1510151600.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:20.275Z,1510151600.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:20.632Z,1510151600.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:20.657Z,1510151600.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:21.061Z,1510151601.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:21.077Z,1510151601.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:21.442Z,1510151601.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:21.474Z,1510151601.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:22.130Z,1510151602.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:22.146Z,1510151602.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:22.253Z,1510151602.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:22.289Z,1510151602.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:22.675Z,1510151602.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:22.699Z,1510151602.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:23.078Z,1510151603.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:23.094Z,1510151603.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:23.479Z,1510151603.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:23.495Z,1510151603.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:23.863Z,1510151603.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:23.885Z,1510151603.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:24.266Z,1510151604.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:24.282Z,1510151604.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:24.667Z,1510151604.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:24.684Z,1510151604.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:25.090Z,1510151605.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:25.118Z,1510151605.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:25.455Z,1510151605.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:25.480Z,1510151605.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:25.879Z,1510151605.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:25.896Z,1510151605.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:26.561Z,1510151606.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:26.578Z,1510151606.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:26.689Z,1510151606.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:26.742Z,1510151606.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:27.117Z,1510151607.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:27.133Z,1510151607.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:27.506Z,1510151607.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:27.566Z,1510151607.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:27.916Z,1510151607.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:27.933Z,1510151607.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:28.296Z,1510151608.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:28.332Z,1510151608.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:28.696Z,1510151608.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:28.733Z,1510151608.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:29.128Z,1510151609.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:29.145Z,1510151609.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:29.509Z,1510151609.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:29.540Z,1510151609.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:30.194Z,1510151610.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:30.233Z,1510151610.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:30.341Z,1510151610.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:30.387Z,1510151610.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:30.769Z,1510151610.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:30.785Z,1510151610.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:31.158Z,1510151611.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:31.191Z,1510151611.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:31.558Z,1510151611.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:31.590Z,1510151611.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:31.948Z,1510151611.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:31.980Z,1510151611.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:32.343Z,1510151612.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:32.360Z,1510151612.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:32.744Z,1510151612.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:32.760Z,1510151612.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:33.181Z,1510151613.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:33.197Z,1510151613.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:33.543Z,1510151613.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:33.560Z,1510151613.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:33.961Z,1510151613.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:33.990Z,1510151613.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:34.638Z,1510151614.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:34.653Z,1510151614.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:34.749Z,1510151614.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:34.799Z,1510151614.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:35.170Z,1510151615.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:35.193Z,1510151615.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:35.576Z,1510151615.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:35.599Z,1510151615.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:35.976Z,1510151615.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:35.000Z,1510151616.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:36.355Z,1510151616.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:36.388Z,1510151616.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:36.756Z,1510151616.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:36.790Z,1510151616.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:37.182Z,1510151617.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:37.210Z,1510151617.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:37.577Z,1510151617.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:37.593Z,1510151617.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:38.246Z,1510151618.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:38.267Z,1510151618.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:38.403Z,1510151618.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:38.443Z,1510151618.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:38.825Z,1510151618.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:38.841Z,1510151618.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:39.228Z,1510151619.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:39.306Z,1510151619.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:39.618Z,1510151619.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:39.667Z,1510151619.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:40.003Z,1510151620.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:40.020Z,1510151620.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:40.406Z,1510151620.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:40.453Z,1510151620.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:40.807Z,1510151620.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:40.827Z,1510151620.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:41.234Z,1510151621.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:41.300Z,1510151621.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:41.606Z,1510151621.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:41.621Z,1510151621.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:42.012Z,1510151622.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:42.029Z,1510151622.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:42.726Z,1510151622.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:42.751Z,1510151622.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:42.861Z,1510151622.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:42.914Z,1510151622.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:43.280Z,1510151623.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:43.307Z,1510151623.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:43.725Z,1510151623.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:43.784Z,1510151623.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:44.079Z,1510151624.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:44.183Z,1510151624.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:44.464Z,1510151624.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:44.507Z,1510151624.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:44.864Z,1510151624.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:44.922Z,1510151624.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:45.294Z,1510151625.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:45.310Z,1510151625.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:45.687Z,1510151625.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:45.726Z,1510151625.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:46.354Z,1510151626.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:46.382Z,1510151626.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:46.498Z,1510151626.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:46.522Z,1510151626.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:46.914Z,1510151626.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:46.947Z,1510151626.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:47.316Z,1510151627.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:47.340Z,1510151627.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:47.711Z,1510151627.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:47.748Z,1510151627.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:48.104Z,1510151628.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:48.137Z,1510151628.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:48.503Z,1510151628.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:48.519Z,1510151628.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:48.902Z,1510151628.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:48.920Z,1510151628.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:49.336Z,1510151629.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:49.391Z,1510151629.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:49.703Z,1510151629.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:49.719Z,1510151629.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:50.118Z,1510151630.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:50.145Z,1510151630.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:50.802Z,1510151630.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:50.823Z,1510151630.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:50.959Z,1510151630.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:50.996Z,1510151630.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:51.374Z,1510151631.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:51.400Z,1510151631.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:51.774Z,1510151631.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:51.800Z,1510151631.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:51.873Z,1510151631.873 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:33:51.873Z,1510151631.873 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T14:33:52.001Z,1510151632.001 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:33:52.001Z,1510151632.001 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:33:52.001Z,1510151632.001 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:33:52.001Z,1510151632.001 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T14:33:52.001Z,1510151632.001 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:33:52.170Z,1510151632.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:52.196Z,1510151632.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:52.273Z,1510151632.273 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:33:52.405Z,1510151632.405 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:33:52.493Z,1510151632.493 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:33:52.566Z,1510151632.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:52.601Z,1510151632.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:52.956Z,1510151632.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:52.974Z,1510151632.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:53.389Z,1510151633.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:53.406Z,1510151633.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:53.774Z,1510151633.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:53.811Z,1510151633.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:53.886Z,1510151633.886 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:33:53.886Z,1510151633.886 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T14:33:54.109Z,1510151634.109 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:33:54.109Z,1510151634.109 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:33:54.109Z,1510151634.109 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:33:54.109Z,1510151634.109 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T14:33:54.110Z,1510151634.110 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:33:54.466Z,1510151634.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:54.502Z,1510151634.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:54.513Z,1510151634.513 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:33:54.597Z,1510151634.597 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:33:54.625Z,1510151634.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:54.676Z,1510151634.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:54.728Z,1510151634.728 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:33:55.040Z,1510151635.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:55.077Z,1510151635.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:55.446Z,1510151635.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:55.470Z,1510151635.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:55.841Z,1510151635.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:55.873Z,1510151635.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:55.957Z,1510151635.957 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:33:55.957Z,1510151635.957 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T14:33:56.231Z,1510151636.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:56.248Z,1510151636.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:56.345Z,1510151636.345 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:33:56.345Z,1510151636.345 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:33:56.345Z,1510151636.345 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:33:56.345Z,1510151636.345 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T14:33:56.346Z,1510151636.346 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:33:56.346Z,1510151636.346 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:33:56.628Z,1510151636.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:56.645Z,1510151636.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:56.749Z,1510151636.749 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:33:56.843Z,1510151636.843 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:33:57.066Z,1510151637.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:57.086Z,1510151637.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:57.432Z,1510151637.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:57.449Z,1510151637.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:57.832Z,1510151637.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:57.849Z,1510151637.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:58.242Z,1510151638.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:58.273Z,1510151638.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:58.357Z,1510151638.357 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:33:58.357Z,1510151638.357 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T14:33:58.457Z,1510151638.457 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:33:58.457Z,1510151638.457 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:33:58.457Z,1510151638.457 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:33:58.458Z,1510151638.458 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T14:33:58.458Z,1510151638.458 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:33:58.861Z,1510151638.861 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:33:59.009Z,1510151639.009 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:33:59.118Z,1510151639.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:59.137Z,1510151639.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:59.221Z,1510151639.221 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:33:59.265Z,1510151639.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:59.300Z,1510151639.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:33:59.671Z,1510151639.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:33:59.690Z,1510151639.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:00.068Z,1510151640.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:00.121Z,1510151640.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:00.472Z,1510151640.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:00.496Z,1510151640.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:00.589Z,1510151640.589 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:34:00.589Z,1510151640.589 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T14:34:00.625Z,1510151640.625 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:34:00.625Z,1510151640.625 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:34:00.625Z,1510151640.625 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:34:00.625Z,1510151640.625 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T14:34:00.626Z,1510151640.626 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:34:00.852Z,1510151640.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:00.894Z,1510151640.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:00.977Z,1510151640.977 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:34:00.977Z,1510151640.977 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:34:01.029Z,1510151641.029 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:34:01.114Z,1510151641.114 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:34:01.252Z,1510151641.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:01.344Z,1510151641.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:01.652Z,1510151641.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:01.688Z,1510151641.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:02.079Z,1510151642.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:02.135Z,1510151642.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:02.473Z,1510151642.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:02.499Z,1510151642.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:03.150Z,1510151643.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:03.200Z,1510151643.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:03.325Z,1510151643.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:03.348Z,1510151643.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:03.732Z,1510151643.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:03.748Z,1510151643.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:04.140Z,1510151644.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:04.163Z,1510151644.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:04.530Z,1510151644.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:04.551Z,1510151644.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:04.914Z,1510151644.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:04.946Z,1510151644.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:05.316Z,1510151645.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:05.346Z,1510151645.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:05.716Z,1510151645.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:05.747Z,1510151645.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:06.144Z,1510151646.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:06.160Z,1510151646.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:06.517Z,1510151646.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:06.546Z,1510151646.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:06.937Z,1510151646.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:06.953Z,1510151646.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:07.598Z,1510151647.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:07.614Z,1510151647.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:07.723Z,1510151647.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:07.754Z,1510151647.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:08.144Z,1510151648.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:08.160Z,1510151648.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:08.539Z,1510151648.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:08.556Z,1510151648.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:08.943Z,1510151648.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:08.960Z,1510151648.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:09.323Z,1510151649.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:09.354Z,1510151649.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:09.724Z,1510151649.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:09.749Z,1510151649.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:10.150Z,1510151650.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:10.167Z,1510151650.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:10.544Z,1510151650.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:10.560Z,1510151650.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:11.241Z,1510151651.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:11.302Z,1510151651.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:11.411Z,1510151651.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:11.450Z,1510151651.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:11.832Z,1510151651.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:11.848Z,1510151651.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:12.233Z,1510151652.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:12.254Z,1510151652.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:12.636Z,1510151652.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:12.652Z,1510151652.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:13.019Z,1510151653.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:13.044Z,1510151653.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:13.412Z,1510151653.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:13.448Z,1510151653.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:13.817Z,1510151653.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:13.846Z,1510151653.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:14.243Z,1510151654.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:14.259Z,1510151654.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:14.612Z,1510151654.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:14.647Z,1510151654.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:15.036Z,1510151655.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:15.052Z,1510151655.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:15.705Z,1510151655.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:15.721Z,1510151655.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:15.853Z,1510151655.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:15.899Z,1510151655.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:16.270Z,1510151656.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:16.295Z,1510151656.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:16.673Z,1510151656.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:16.698Z,1510151656.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:17.069Z,1510151657.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:17.103Z,1510151657.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:17.463Z,1510151657.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:17.496Z,1510151657.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:17.857Z,1510151657.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:17.872Z,1510151657.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:18.293Z,1510151658.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:18.309Z,1510151658.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:18.706Z,1510151658.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:18.747Z,1510151658.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:19.963Z,1510151659.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:19.983Z,1510151659.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:20.128Z,1510151660.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:20.161Z,1510151660.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:20.534Z,1510151660.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:20.571Z,1510151660.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:20.938Z,1510151660.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:20.962Z,1510151660.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:21.334Z,1510151661.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:21.351Z,1510151661.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:21.726Z,1510151661.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:21.742Z,1510151661.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:22.121Z,1510151662.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:22.144Z,1510151662.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:22.528Z,1510151662.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:22.537Z,1510151662.537 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T14:34:22.537Z,1510151662.537 [BPC1] Data Fault, FailCount= 1
2017-11-08T14:34:22.537Z,1510151662.537 [BPC1](ERROR): Data Fault
2017-11-08T14:34:22.550Z,1510151662.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:22.645Z,1510151662.645 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T14:34:22.926Z,1510151662.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:22.944Z,1510151662.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:23.340Z,1510151663.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:23.359Z,1510151663.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:23.735Z,1510151663.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:23.753Z,1510151663.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:23.833Z,1510151663.833 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T14:34:23.833Z,1510151663.833 [BPC1] No Fault, FailCount= 1
2017-11-08T14:34:24.417Z,1510151664.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:24.480Z,1510151664.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:24.603Z,1510151664.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:24.636Z,1510151664.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:25.025Z,1510151665.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:25.041Z,1510151665.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:25.425Z,1510151665.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:25.441Z,1510151665.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:25.810Z,1510151665.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:25.842Z,1510151665.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:26.204Z,1510151666.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:26.232Z,1510151666.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:26.604Z,1510151666.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:26.620Z,1510151666.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:27.032Z,1510151667.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:27.049Z,1510151667.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:27.404Z,1510151667.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:27.421Z,1510151667.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:27.807Z,1510151667.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:27.847Z,1510151667.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:28.217Z,1510151668.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:28.251Z,1510151668.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:28.996Z,1510151668.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:29.012Z,1510151669.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:29.113Z,1510151669.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:29.159Z,1510151669.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:29.536Z,1510151669.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:29.552Z,1510151669.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:29.937Z,1510151669.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:29.952Z,1510151669.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:30.336Z,1510151670.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:30.352Z,1510151670.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:30.719Z,1510151670.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:30.749Z,1510151670.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:31.119Z,1510151671.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:31.150Z,1510151671.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:31.515Z,1510151671.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:31.549Z,1510151671.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:31.920Z,1510151671.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:31.956Z,1510151671.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:32.351Z,1510151672.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:32.367Z,1510151672.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:32.740Z,1510151672.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:32.795Z,1510151672.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:33.414Z,1510151673.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:33.450Z,1510151673.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:33.555Z,1510151673.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:33.599Z,1510151673.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:33.969Z,1510151673.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:34.011Z,1510151674.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:34.369Z,1510151674.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:34.402Z,1510151674.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:34.773Z,1510151674.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:34.798Z,1510151674.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:35.158Z,1510151675.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:35.186Z,1510151675.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:35.554Z,1510151675.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:35.570Z,1510151675.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:35.960Z,1510151675.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:35.976Z,1510151675.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:36.388Z,1510151676.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:36.405Z,1510151676.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:36.759Z,1510151676.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:36.780Z,1510151676.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:37.169Z,1510151677.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:37.202Z,1510151677.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:37.851Z,1510151677.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:37.867Z,1510151677.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:37.987Z,1510151677.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:38.035Z,1510151678.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:38.406Z,1510151678.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:38.427Z,1510151678.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:38.807Z,1510151678.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:38.828Z,1510151678.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:39.204Z,1510151679.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:39.220Z,1510151679.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:39.588Z,1510151679.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:39.622Z,1510151679.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:40.011Z,1510151680.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:40.032Z,1510151680.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:40.408Z,1510151680.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:40.424Z,1510151680.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:41.197Z,1510151681.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:41.214Z,1510151681.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:41.321Z,1510151681.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:41.346Z,1510151681.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:41.748Z,1510151681.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:41.765Z,1510151681.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:42.149Z,1510151682.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:42.165Z,1510151682.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:42.549Z,1510151682.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:42.565Z,1510151682.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:42.928Z,1510151682.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:42.960Z,1510151682.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:43.332Z,1510151683.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:43.368Z,1510151683.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:43.729Z,1510151683.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:43.757Z,1510151683.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:44.156Z,1510151684.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:44.173Z,1510151684.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:44.542Z,1510151684.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:44.576Z,1510151684.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:45.218Z,1510151685.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:45.314Z,1510151685.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:45.423Z,1510151685.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:45.452Z,1510151685.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:45.837Z,1510151685.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:45.883Z,1510151685.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:46.247Z,1510151686.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:46.274Z,1510151686.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:46.634Z,1510151686.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:46.683Z,1510151686.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:47.029Z,1510151687.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:47.045Z,1510151687.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:47.429Z,1510151687.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:47.445Z,1510151687.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:47.828Z,1510151687.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:47.848Z,1510151687.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:48.249Z,1510151688.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:48.273Z,1510151688.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:48.634Z,1510151688.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:48.655Z,1510151688.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:49.323Z,1510151689.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:49.344Z,1510151689.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:49.445Z,1510151689.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:49.487Z,1510151689.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:49.867Z,1510151689.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:49.883Z,1510151689.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:50.270Z,1510151690.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:50.291Z,1510151690.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:50.668Z,1510151690.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:50.685Z,1510151690.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:51.051Z,1510151691.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:51.076Z,1510151691.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:51.451Z,1510151691.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:51.479Z,1510151691.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:51.852Z,1510151691.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:51.878Z,1510151691.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:52.278Z,1510151692.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:52.299Z,1510151692.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:52.651Z,1510151692.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:52.675Z,1510151692.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:53.065Z,1510151693.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:53.088Z,1510151693.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:53.898Z,1510151693.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:53.913Z,1510151693.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:54.044Z,1510151694.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:54.087Z,1510151694.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:54.454Z,1510151694.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:54.470Z,1510151694.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:54.849Z,1510151694.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:54.897Z,1510151694.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:55.254Z,1510151695.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:55.285Z,1510151695.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:55.645Z,1510151695.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:55.662Z,1510151695.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:56.041Z,1510151696.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:56.063Z,1510151696.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:56.446Z,1510151696.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:56.462Z,1510151696.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:56.847Z,1510151696.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:56.867Z,1510151696.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:57.266Z,1510151697.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:57.293Z,1510151697.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:57.653Z,1510151697.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:57.691Z,1510151697.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:58.381Z,1510151698.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:58.397Z,1510151698.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:58.510Z,1510151698.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:58.535Z,1510151698.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:58.942Z,1510151698.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:58.958Z,1510151698.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:59.337Z,1510151699.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:59.353Z,1510151699.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:34:59.739Z,1510151699.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:34:59.756Z,1510151699.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:00.116Z,1510151700.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:00.153Z,1510151700.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:00.511Z,1510151700.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:00.528Z,1510151700.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:00.914Z,1510151700.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:00.931Z,1510151700.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:01.353Z,1510151701.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:01.370Z,1510151701.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:01.715Z,1510151701.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:01.735Z,1510151701.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:02.125Z,1510151702.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:02.154Z,1510151702.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:02.814Z,1510151702.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:02.830Z,1510151702.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:02.943Z,1510151702.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:02.975Z,1510151702.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:03.360Z,1510151703.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:03.377Z,1510151703.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:03.763Z,1510151703.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:03.780Z,1510151703.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:04.160Z,1510151704.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:04.177Z,1510151704.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:04.543Z,1510151704.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:04.570Z,1510151704.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:04.944Z,1510151704.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:04.976Z,1510151704.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:05.370Z,1510151705.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:05.390Z,1510151705.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:05.764Z,1510151705.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:05.781Z,1510151705.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:06.421Z,1510151706.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:06.437Z,1510151706.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:06.569Z,1510151706.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:06.625Z,1510151706.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:06.982Z,1510151706.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:07.028Z,1510151707.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:07.380Z,1510151707.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:07.403Z,1510151707.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:07.778Z,1510151707.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:07.800Z,1510151707.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:08.174Z,1510151708.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:08.231Z,1510151708.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:08.574Z,1510151708.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:08.590Z,1510151708.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:08.978Z,1510151708.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:09.028Z,1510151709.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:09.394Z,1510151709.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:09.422Z,1510151709.422 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:09.423Z,1510151709.423 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2017-11-08T14:35:09.423Z,1510151709.423 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T14:35:09.425Z,1510151709.425 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:09.425Z,1510151709.425 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24
2017-11-08T14:35:09.425Z,1510151709.425 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T14:35:09.426Z,1510151709.426 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:09.426Z,1510151709.426 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 24
2017-11-08T14:35:09.427Z,1510151709.427 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T14:35:09.506Z,1510151709.506 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T14:35:09.506Z,1510151709.506 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T14:35:09.506Z,1510151709.506 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T14:35:09.776Z,1510151709.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:09.888Z,1510151709.888 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T14:35:09.888Z,1510151709.888 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2017-11-08T14:35:09.889Z,1510151709.889 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T14:35:09.889Z,1510151709.889 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24
2017-11-08T14:35:09.889Z,1510151709.889 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T14:35:09.889Z,1510151709.889 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 24
2017-11-08T14:35:10.178Z,1510151710.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:10.204Z,1510151710.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T14:35:10.204Z,1510151710.204 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:35:10.205Z,1510151710.205 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:35:10.205Z,1510151710.205 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T14:35:10.206Z,1510151710.206 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:35:10.206Z,1510151710.206 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:35:10.206Z,1510151710.206 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T14:35:10.207Z,1510151710.207 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:35:10.207Z,1510151710.207 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:35:10.862Z,1510151710.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:10.877Z,1510151710.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s.
2017-11-08T14:35:10.878Z,1510151710.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:11.016Z,1510151711.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:11.031Z,1510151711.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T14:35:11.033Z,1510151711.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:11.426Z,1510151711.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:11.458Z,1510151711.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T14:35:11.459Z,1510151711.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:11.828Z,1510151711.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:11.843Z,1510151711.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T14:35:11.869Z,1510151711.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:12.226Z,1510151712.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:12.241Z,1510151712.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T14:35:12.242Z,1510151712.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:12.616Z,1510151712.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:12.636Z,1510151712.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T14:35:12.637Z,1510151712.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:13.029Z,1510151713.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:13.045Z,1510151713.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T14:35:13.046Z,1510151713.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:13.429Z,1510151713.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:13.445Z,1510151713.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T14:35:13.446Z,1510151713.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:14.108Z,1510151714.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:14.124Z,1510151714.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2017-11-08T14:35:14.125Z,1510151714.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:14.232Z,1510151714.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:14.282Z,1510151714.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-08T14:35:14.283Z,1510151714.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:14.661Z,1510151714.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:14.677Z,1510151714.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-08T14:35:14.678Z,1510151714.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:15.049Z,1510151715.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:15.081Z,1510151715.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-08T14:35:15.082Z,1510151715.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:15.449Z,1510151715.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:15.475Z,1510151715.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-08T14:35:15.476Z,1510151715.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:15.840Z,1510151715.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:15.864Z,1510151715.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T14:35:15.869Z,1510151715.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:16.243Z,1510151716.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:16.278Z,1510151716.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T14:35:16.279Z,1510151716.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:16.636Z,1510151716.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:16.652Z,1510151716.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T14:35:16.653Z,1510151716.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:17.073Z,1510151717.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:17.130Z,1510151717.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T14:35:17.131Z,1510151717.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:17.439Z,1510151717.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:17.455Z,1510151717.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T14:35:17.456Z,1510151717.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:17.849Z,1510151717.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:17.885Z,1510151717.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T14:35:17.886Z,1510151717.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:18.533Z,1510151718.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:18.549Z,1510151718.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2017-11-08T14:35:18.550Z,1510151718.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:18.650Z,1510151718.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:18.694Z,1510151718.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T14:35:18.695Z,1510151718.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:19.072Z,1510151719.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:19.088Z,1510151719.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T14:35:19.089Z,1510151719.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:19.476Z,1510151719.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:19.491Z,1510151719.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T14:35:19.492Z,1510151719.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:19.862Z,1510151719.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:19.895Z,1510151719.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T14:35:19.896Z,1510151719.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:20.263Z,1510151720.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:20.295Z,1510151720.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T14:35:20.296Z,1510151720.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:20.652Z,1510151720.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:20.680Z,1510151720.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T14:35:20.681Z,1510151720.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:21.078Z,1510151721.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:21.099Z,1510151721.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T14:35:21.100Z,1510151721.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:21.474Z,1510151721.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:21.495Z,1510151721.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T14:35:21.496Z,1510151721.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:22.141Z,1510151722.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:22.157Z,1510151722.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2017-11-08T14:35:22.158Z,1510151722.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:22.261Z,1510151722.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:22.295Z,1510151722.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T14:35:22.296Z,1510151722.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:22.684Z,1510151722.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:22.700Z,1510151722.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T14:35:22.701Z,1510151722.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:23.084Z,1510151723.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:23.099Z,1510151723.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T14:35:23.100Z,1510151723.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:23.483Z,1510151723.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:23.503Z,1510151723.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T14:35:23.504Z,1510151723.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:23.867Z,1510151723.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:23.898Z,1510151723.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T14:35:23.899Z,1510151723.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:24.267Z,1510151724.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:24.300Z,1510151724.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T14:35:24.301Z,1510151724.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:24.668Z,1510151724.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:24.693Z,1510151724.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T14:35:24.694Z,1510151724.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:25.090Z,1510151725.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:25.108Z,1510151725.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T14:35:25.109Z,1510151725.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:25.463Z,1510151725.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:25.494Z,1510151725.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T14:35:25.494Z,1510151725.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:25.883Z,1510151725.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:25.899Z,1510151725.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T14:35:25.900Z,1510151725.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:26.581Z,1510151726.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:26.598Z,1510151726.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T14:35:26.599Z,1510151726.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:26.702Z,1510151726.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:26.733Z,1510151726.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T14:35:26.734Z,1510151726.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:27.114Z,1510151727.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:27.140Z,1510151727.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T14:35:27.141Z,1510151727.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:27.517Z,1510151727.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:27.542Z,1510151727.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T14:35:27.543Z,1510151727.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:27.917Z,1510151727.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:27.943Z,1510151727.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T14:35:27.944Z,1510151727.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:28.304Z,1510151728.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:28.312Z,1510151728.312 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-08T14:35:28.312Z,1510151728.312 [BPC1] Data Fault, FailCount= 1
2017-11-08T14:35:28.312Z,1510151728.312 [BPC1](ERROR): Data Fault
2017-11-08T14:35:28.338Z,1510151728.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T14:35:28.338Z,1510151728.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:28.429Z,1510151728.429 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T14:35:28.701Z,1510151728.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:28.746Z,1510151728.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T14:35:28.747Z,1510151728.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:29.133Z,1510151729.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:29.149Z,1510151729.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-08T14:35:29.150Z,1510151729.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:29.516Z,1510151729.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:29.546Z,1510151729.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:29.621Z,1510151729.621 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T14:35:29.621Z,1510151729.621 [BPC1] No Fault, FailCount= 1
2017-11-08T14:35:30.192Z,1510151730.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:30.259Z,1510151730.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:30.357Z,1510151730.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:30.399Z,1510151730.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:30.778Z,1510151730.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:30.800Z,1510151730.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:31.180Z,1510151731.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:31.195Z,1510151731.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:31.581Z,1510151731.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:31.597Z,1510151731.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:31.964Z,1510151731.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:32.001Z,1510151732.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:32.359Z,1510151732.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:32.375Z,1510151732.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:32.760Z,1510151732.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:32.776Z,1510151732.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:33.187Z,1510151733.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:33.211Z,1510151733.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:33.559Z,1510151733.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:33.579Z,1510151733.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:33.973Z,1510151733.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:34.008Z,1510151734.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:34.657Z,1510151734.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:34.673Z,1510151734.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:34.808Z,1510151734.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:34.847Z,1510151734.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:35.222Z,1510151735.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:35.248Z,1510151735.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:35.626Z,1510151735.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:35.650Z,1510151735.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:36.018Z,1510151736.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:36.046Z,1510151736.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:36.412Z,1510151736.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:36.429Z,1510151736.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:36.807Z,1510151736.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:36.828Z,1510151736.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:37.238Z,1510151737.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:37.255Z,1510151737.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:37.620Z,1510151737.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:37.653Z,1510151737.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:38.303Z,1510151738.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:38.355Z,1510151738.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:38.469Z,1510151738.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:38.519Z,1510151738.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:38.894Z,1510151738.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:38.907Z,1510151738.907 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-11-08T14:35:38.935Z,1510151738.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:39.295Z,1510151739.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:39.315Z,1510151739.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:39.696Z,1510151739.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:39.720Z,1510151739.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:40.086Z,1510151740.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:40.113Z,1510151740.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:40.474Z,1510151740.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:40.490Z,1510151740.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:40.876Z,1510151740.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:40.919Z,1510151740.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:41.311Z,1510151741.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:41.332Z,1510151741.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:41.677Z,1510151741.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:41.712Z,1510151741.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:42.087Z,1510151742.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:42.112Z,1510151742.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:42.773Z,1510151742.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:42.789Z,1510151742.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:42.892Z,1510151742.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:42.936Z,1510151742.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:43.316Z,1510151743.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:43.332Z,1510151743.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:43.721Z,1510151743.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:43.736Z,1510151743.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:44.111Z,1510151744.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:44.134Z,1510151744.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:44.497Z,1510151744.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:44.527Z,1510151744.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:44.894Z,1510151744.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:44.921Z,1510151744.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:45.323Z,1510151745.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:45.344Z,1510151745.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:45.715Z,1510151745.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:45.746Z,1510151745.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:46.382Z,1510151746.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:46.398Z,1510151746.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:46.535Z,1510151746.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:46.568Z,1510151746.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:46.942Z,1510151746.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:46.974Z,1510151746.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:47.342Z,1510151747.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:47.373Z,1510151747.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:47.742Z,1510151747.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:47.776Z,1510151747.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:48.127Z,1510151748.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:48.144Z,1510151748.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:48.531Z,1510151748.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:48.548Z,1510151748.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:48.932Z,1510151748.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:48.949Z,1510151748.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:49.358Z,1510151749.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:49.375Z,1510151749.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:49.730Z,1510151749.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:49.746Z,1510151749.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:50.142Z,1510151750.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:50.251Z,1510151750.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:50.828Z,1510151750.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:50.844Z,1510151750.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:50.955Z,1510151750.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:50.988Z,1510151750.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:51.376Z,1510151751.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:51.432Z,1510151751.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:51.776Z,1510151751.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:51.792Z,1510151751.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:52.177Z,1510151752.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:52.235Z,1510151752.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:52.555Z,1510151752.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:52.590Z,1510151752.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:52.955Z,1510151752.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:52.980Z,1510151752.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:53.382Z,1510151753.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:53.399Z,1510151753.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:53.776Z,1510151753.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:53.793Z,1510151753.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:54.443Z,1510151754.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:54.475Z,1510151754.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:54.595Z,1510151754.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:54.627Z,1510151754.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:55.010Z,1510151755.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:55.036Z,1510151755.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:55.409Z,1510151755.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:55.435Z,1510151755.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:55.809Z,1510151755.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:55.837Z,1510151755.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:56.199Z,1510151756.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:56.234Z,1510151756.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:56.596Z,1510151756.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:56.611Z,1510151756.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:57.028Z,1510151757.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:57.045Z,1510151757.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:57.399Z,1510151757.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:57.434Z,1510151757.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:57.809Z,1510151757.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:57.834Z,1510151757.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:58.476Z,1510151758.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:58.492Z,1510151758.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:58.599Z,1510151758.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:58.639Z,1510151758.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:59.010Z,1510151759.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:59.040Z,1510151759.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:59.409Z,1510151759.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:59.436Z,1510151759.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:35:59.820Z,1510151759.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:35:59.843Z,1510151759.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:00.195Z,1510151760.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:00.210Z,1510151760.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:00.600Z,1510151760.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:00.647Z,1510151760.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:01.032Z,1510151761.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:01.048Z,1510151761.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:01.395Z,1510151761.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:01.436Z,1510151761.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:01.799Z,1510151761.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:01.832Z,1510151761.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:02.199Z,1510151762.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:02.241Z,1510151762.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:02.599Z,1510151762.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:02.615Z,1510151762.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:02.000Z,1510151763.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:03.016Z,1510151763.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:03.399Z,1510151763.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:03.420Z,1510151763.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:03.800Z,1510151763.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:03.894Z,1510151763.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:04.198Z,1510151764.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:04.260Z,1510151764.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:04.599Z,1510151764.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:04.630Z,1510151764.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:04.995Z,1510151764.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:05.022Z,1510151765.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:05.400Z,1510151765.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:05.432Z,1510151765.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:05.799Z,1510151765.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:05.836Z,1510151765.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:06.195Z,1510151766.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:06.210Z,1510151766.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:06.599Z,1510151766.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:06.616Z,1510151766.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:06.000Z,1510151767.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:07.032Z,1510151767.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:07.409Z,1510151767.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:07.440Z,1510151767.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:08.091Z,1510151768.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:08.111Z,1510151768.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:08.245Z,1510151768.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:08.261Z,1510151768.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:08.646Z,1510151768.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:08.662Z,1510151768.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:09.050Z,1510151769.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:09.066Z,1510151769.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:09.450Z,1510151769.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:09.466Z,1510151769.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:09.841Z,1510151769.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:09.857Z,1510151769.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:10.241Z,1510151770.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:10.271Z,1510151770.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:10.642Z,1510151770.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:10.659Z,1510151770.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:11.057Z,1510151771.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:11.097Z,1510151771.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:11.450Z,1510151771.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:11.466Z,1510151771.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:12.133Z,1510151772.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:12.149Z,1510151772.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:12.257Z,1510151772.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:12.307Z,1510151772.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:12.685Z,1510151772.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:12.764Z,1510151772.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:13.085Z,1510151773.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:13.101Z,1510151773.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:13.469Z,1510151773.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:13.502Z,1510151773.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:13.864Z,1510151773.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:13.916Z,1510151773.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:14.259Z,1510151774.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:14.275Z,1510151774.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:14.664Z,1510151774.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:14.720Z,1510151774.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:15.097Z,1510151775.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:15.113Z,1510151775.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:15.460Z,1510151775.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:15.476Z,1510151775.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:15.873Z,1510151775.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:15.907Z,1510151775.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:16.554Z,1510151776.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:16.570Z,1510151776.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:16.708Z,1510151776.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:16.755Z,1510151776.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:17.122Z,1510151777.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:17.154Z,1510151777.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:17.526Z,1510151777.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:17.555Z,1510151777.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:17.922Z,1510151777.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:17.953Z,1510151777.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:18.311Z,1510151778.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:18.332Z,1510151778.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:18.712Z,1510151778.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:18.728Z,1510151778.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:19.130Z,1510151779.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:19.153Z,1510151779.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:19.525Z,1510151779.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:19.555Z,1510151779.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:20.197Z,1510151780.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:20.213Z,1510151780.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:20.315Z,1510151780.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:20.363Z,1510151780.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:20.740Z,1510151780.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:20.757Z,1510151780.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:21.141Z,1510151781.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:21.157Z,1510151781.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:21.530Z,1510151781.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:21.598Z,1510151781.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:21.920Z,1510151781.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:21.952Z,1510151781.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:22.321Z,1510151782.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:22.353Z,1510151782.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:22.721Z,1510151782.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:22.768Z,1510151782.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:23.146Z,1510151783.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:23.167Z,1510151783.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:23.534Z,1510151783.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:23.561Z,1510151783.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:24.207Z,1510151784.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:24.224Z,1510151784.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:24.336Z,1510151784.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:24.383Z,1510151784.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:24.756Z,1510151784.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:24.780Z,1510151784.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:25.157Z,1510151785.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:25.173Z,1510151785.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:25.551Z,1510151785.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:25.572Z,1510151785.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:25.936Z,1510151785.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:25.963Z,1510151785.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:26.331Z,1510151786.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:26.363Z,1510151786.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:26.735Z,1510151786.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:26.761Z,1510151786.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:27.164Z,1510151787.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:27.180Z,1510151787.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:27.555Z,1510151787.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:27.579Z,1510151787.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:28.230Z,1510151788.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:28.258Z,1510151788.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:28.376Z,1510151788.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:28.415Z,1510151788.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:28.797Z,1510151788.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:28.813Z,1510151788.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:29.186Z,1510151789.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:29.211Z,1510151789.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:29.598Z,1510151789.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:29.614Z,1510151789.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:29.976Z,1510151789.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:30.005Z,1510151790.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:30.371Z,1510151790.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:30.388Z,1510151790.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:30.776Z,1510151790.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:30.809Z,1510151790.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:31.213Z,1510151791.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:31.229Z,1510151791.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:31.585Z,1510151791.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:31.619Z,1510151791.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:32.266Z,1510151792.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:32.282Z,1510151792.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:32.391Z,1510151792.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:32.443Z,1510151792.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:32.807Z,1510151792.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:32.829Z,1510151792.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:33.214Z,1510151793.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:33.254Z,1510151793.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:33.611Z,1510151793.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:33.628Z,1510151793.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:33.987Z,1510151793.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:34.018Z,1510151794.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:34.392Z,1510151794.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:34.418Z,1510151794.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:34.792Z,1510151794.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:34.843Z,1510151794.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:35.218Z,1510151795.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:35.234Z,1510151795.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:35.611Z,1510151795.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:35.632Z,1510151795.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:36.290Z,1510151796.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:36.312Z,1510151796.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:36.424Z,1510151796.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:36.477Z,1510151796.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:36.846Z,1510151796.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:36.876Z,1510151796.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:37.246Z,1510151797.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:37.276Z,1510151797.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:37.637Z,1510151797.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:37.671Z,1510151797.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:38.032Z,1510151798.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:38.040Z,1510151798.040 [BPC1](ERROR): Failed to receive battery data
2017-11-08T14:36:38.040Z,1510151798.040 [BPC1] Communications Fault, FailCount= 1
2017-11-08T14:36:38.040Z,1510151798.040 [BPC1](ERROR): Communications Fault
2017-11-08T14:36:38.058Z,1510151798.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:38.149Z,1510151798.149 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T14:36:38.431Z,1510151798.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:38.448Z,1510151798.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:38.832Z,1510151798.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:38.848Z,1510151798.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:39.284Z,1510151799.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:39.302Z,1510151799.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:39.401Z,1510151799.401 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T14:36:39.401Z,1510151799.401 [BPC1] No Fault, FailCount= 1
2017-11-08T14:36:39.635Z,1510151799.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:39.727Z,1510151799.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:40.049Z,1510151800.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:40.077Z,1510151800.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:40.725Z,1510151800.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:40.747Z,1510151800.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:40.894Z,1510151800.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:40.927Z,1510151800.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:41.306Z,1510151801.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:41.333Z,1510151801.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:41.707Z,1510151801.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:41.734Z,1510151801.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:42.102Z,1510151802.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:42.132Z,1510151802.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:42.494Z,1510151802.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:42.522Z,1510151802.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:42.893Z,1510151802.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:42.909Z,1510151802.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:43.323Z,1510151803.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:43.343Z,1510151803.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:43.706Z,1510151803.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:43.738Z,1510151803.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:44.405Z,1510151804.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:44.434Z,1510151804.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:44.545Z,1510151804.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:44.562Z,1510151804.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:44.966Z,1510151804.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:44.000Z,1510151805.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:45.366Z,1510151805.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:45.393Z,1510151805.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:45.762Z,1510151805.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:45.789Z,1510151805.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:46.151Z,1510151806.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:46.168Z,1510151806.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:46.552Z,1510151806.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:46.568Z,1510151806.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:46.956Z,1510151806.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:46.973Z,1510151806.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:47.382Z,1510151807.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:47.414Z,1510151807.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:47.752Z,1510151807.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:47.811Z,1510151807.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:48.170Z,1510151808.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:48.200Z,1510151808.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:48.846Z,1510151808.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:48.861Z,1510151808.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:48.958Z,1510151808.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:48.975Z,1510151808.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:49.389Z,1510151809.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:49.406Z,1510151809.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:49.788Z,1510151809.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:49.804Z,1510151809.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:50.190Z,1510151810.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:50.206Z,1510151810.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:50.567Z,1510151810.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:50.618Z,1510151810.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:50.963Z,1510151810.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:50.980Z,1510151810.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:51.400Z,1510151811.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:51.416Z,1510151811.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:51.789Z,1510151811.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:51.805Z,1510151811.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:52.447Z,1510151812.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:52.463Z,1510151812.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:52.572Z,1510151812.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:52.613Z,1510151812.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:52.990Z,1510151812.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:53.011Z,1510151813.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:53.393Z,1510151813.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:53.408Z,1510151813.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:53.794Z,1510151813.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:53.810Z,1510151813.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:54.172Z,1510151814.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:54.206Z,1510151814.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:54.572Z,1510151814.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:54.607Z,1510151814.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:54.977Z,1510151814.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:55.004Z,1510151815.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:55.403Z,1510151815.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:55.424Z,1510151815.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:55.772Z,1510151815.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:55.803Z,1510151815.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:56.194Z,1510151816.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:56.223Z,1510151816.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:56.870Z,1510151816.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:56.900Z,1510151816.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:57.019Z,1510151817.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:57.052Z,1510151817.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:57.434Z,1510151817.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:57.467Z,1510151817.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:57.833Z,1510151817.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:57.864Z,1510151817.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:58.233Z,1510151818.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:58.264Z,1510151818.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:58.620Z,1510151818.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:58.659Z,1510151818.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:59.048Z,1510151819.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:59.068Z,1510151819.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:59.418Z,1510151819.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:59.440Z,1510151819.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:36:59.823Z,1510151819.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:36:59.872Z,1510151819.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:00.233Z,1510151820.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:00.266Z,1510151820.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:00.894Z,1510151820.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:00.965Z,1510151820.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:01.083Z,1510151821.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:01.123Z,1510151821.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:01.504Z,1510151821.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:01.520Z,1510151821.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:01.893Z,1510151821.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:01.925Z,1510151821.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:02.302Z,1510151822.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:02.328Z,1510151822.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:02.687Z,1510151822.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:02.707Z,1510151822.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:03.083Z,1510151823.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:03.099Z,1510151823.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:03.487Z,1510151823.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:03.507Z,1510151823.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:03.883Z,1510151823.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:03.904Z,1510151823.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:04.305Z,1510151824.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:04.330Z,1510151824.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:04.697Z,1510151824.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:04.729Z,1510151824.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:05.373Z,1510151825.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:05.389Z,1510151825.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:05.501Z,1510151825.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:05.546Z,1510151825.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:05.924Z,1510151825.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:05.940Z,1510151825.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:06.328Z,1510151826.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:06.344Z,1510151826.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:06.713Z,1510151826.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:06.746Z,1510151826.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:07.107Z,1510151827.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:07.141Z,1510151827.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:07.507Z,1510151827.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:07.542Z,1510151827.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:07.908Z,1510151827.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:07.940Z,1510151827.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:08.344Z,1510151828.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:08.361Z,1510151828.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:08.717Z,1510151828.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:08.745Z,1510151828.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:09.394Z,1510151829.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:09.448Z,1510151829.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:09.560Z,1510151829.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:09.599Z,1510151829.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:09.980Z,1510151829.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:09.997Z,1510151829.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:10.369Z,1510151830.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:10.402Z,1510151830.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:10.780Z,1510151830.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:10.797Z,1510151830.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:11.155Z,1510151831.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:11.191Z,1510151831.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:11.555Z,1510151831.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:11.571Z,1510151831.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:11.961Z,1510151831.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:11.989Z,1510151831.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:12.388Z,1510151832.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:12.404Z,1510151832.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:12.773Z,1510151832.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:12.801Z,1510151832.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:13.495Z,1510151833.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:13.511Z,1510151833.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:13.619Z,1510151833.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:13.649Z,1510151833.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:14.025Z,1510151834.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:14.056Z,1510151834.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:14.437Z,1510151834.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:14.453Z,1510151834.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:14.826Z,1510151834.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:14.856Z,1510151834.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:15.215Z,1510151835.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:15.249Z,1510151835.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:15.616Z,1510151835.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:15.649Z,1510151835.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:16.042Z,1510151836.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:16.059Z,1510151836.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:16.415Z,1510151836.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:16.452Z,1510151836.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:16.829Z,1510151836.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:16.858Z,1510151836.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:17.510Z,1510151837.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:17.526Z,1510151837.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:17.635Z,1510151837.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:17.697Z,1510151837.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:18.056Z,1510151838.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:18.077Z,1510151838.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:18.452Z,1510151838.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:18.475Z,1510151838.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:18.853Z,1510151838.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:18.869Z,1510151838.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:19.235Z,1510151839.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:19.262Z,1510151839.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:19.631Z,1510151839.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:19.657Z,1510151839.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:20.060Z,1510151840.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:20.127Z,1510151840.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:20.447Z,1510151840.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:20.463Z,1510151840.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:20.831Z,1510151840.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:20.865Z,1510151840.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:21.236Z,1510151841.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:21.269Z,1510151841.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:21.636Z,1510151841.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:21.687Z,1510151841.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:22.032Z,1510151842.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:22.064Z,1510151842.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:22.436Z,1510151842.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:22.487Z,1510151842.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:22.831Z,1510151842.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:22.848Z,1510151842.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:23.231Z,1510151843.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:23.287Z,1510151843.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:23.635Z,1510151843.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:23.652Z,1510151843.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:24.031Z,1510151844.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:24.047Z,1510151844.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:24.431Z,1510151844.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:24.452Z,1510151844.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:24.839Z,1510151844.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:24.877Z,1510151844.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:25.238Z,1510151845.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:25.253Z,1510151845.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:25.634Z,1510151845.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:25.650Z,1510151845.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:26.038Z,1510151846.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:26.054Z,1510151846.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:26.434Z,1510151846.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:26.455Z,1510151846.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:26.838Z,1510151846.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:26.854Z,1510151846.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:27.238Z,1510151847.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:27.254Z,1510151847.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:27.634Z,1510151847.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:27.655Z,1510151847.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:28.038Z,1510151848.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:28.055Z,1510151848.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:28.449Z,1510151848.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:28.482Z,1510151848.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:29.131Z,1510151849.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:29.147Z,1510151849.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:29.253Z,1510151849.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:29.299Z,1510151849.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:29.674Z,1510151849.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:29.696Z,1510151849.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:30.077Z,1510151850.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:30.097Z,1510151850.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:30.474Z,1510151850.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:30.499Z,1510151850.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:30.859Z,1510151850.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:30.895Z,1510151850.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:31.255Z,1510151851.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:31.310Z,1510151851.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:31.656Z,1510151851.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:31.697Z,1510151851.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:32.092Z,1510151852.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:32.109Z,1510151852.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:32.459Z,1510151852.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:32.495Z,1510151852.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:32.874Z,1510151852.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:32.909Z,1510151852.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:33.553Z,1510151853.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:33.589Z,1510151853.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:33.702Z,1510151853.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:33.726Z,1510151853.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:34.128Z,1510151854.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:34.145Z,1510151854.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:34.528Z,1510151854.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:34.543Z,1510151854.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:34.932Z,1510151854.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:34.949Z,1510151854.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:35.311Z,1510151855.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:35.341Z,1510151855.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:35.708Z,1510151855.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:35.741Z,1510151855.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:36.135Z,1510151856.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:36.152Z,1510151856.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:36.512Z,1510151856.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:36.543Z,1510151856.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:36.907Z,1510151856.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:36.943Z,1510151856.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:37.307Z,1510151857.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:37.339Z,1510151857.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:37.709Z,1510151857.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:37.742Z,1510151857.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:38.112Z,1510151858.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:38.128Z,1510151858.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:38.511Z,1510151858.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:38.527Z,1510151858.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:38.911Z,1510151858.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:38.931Z,1510151858.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:39.314Z,1510151859.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:39.329Z,1510151859.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:39.715Z,1510151859.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:39.732Z,1510151859.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:40.112Z,1510151860.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:40.129Z,1510151860.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:40.510Z,1510151860.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:40.526Z,1510151860.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:40.913Z,1510151860.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:40.929Z,1510151860.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:41.314Z,1510151861.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:41.331Z,1510151861.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:41.726Z,1510151861.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:41.770Z,1510151861.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:42.400Z,1510151862.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:42.471Z,1510151862.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:42.576Z,1510151862.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:42.614Z,1510151862.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:42.999Z,1510151862.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:43.015Z,1510151863.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:43.393Z,1510151863.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:43.435Z,1510151863.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:43.796Z,1510151863.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:43.812Z,1510151863.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:44.176Z,1510151864.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:44.220Z,1510151864.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:44.576Z,1510151864.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:44.611Z,1510151864.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:44.977Z,1510151864.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:45.023Z,1510151865.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:45.404Z,1510151865.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:45.419Z,1510151865.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:45.802Z,1510151865.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:45.818Z,1510151865.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:46.466Z,1510151866.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:46.505Z,1510151866.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:46.627Z,1510151866.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:46.659Z,1510151866.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:47.041Z,1510151867.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:47.067Z,1510151867.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:47.437Z,1510151867.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:47.464Z,1510151867.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:47.833Z,1510151867.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:47.866Z,1510151867.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:48.227Z,1510151868.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:48.243Z,1510151868.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:48.628Z,1510151868.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:48.726Z,1510151868.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:49.085Z,1510151869.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:49.321Z,1510151869.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:49.439Z,1510151869.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:49.607Z,1510151869.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:49.835Z,1510151869.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:49.874Z,1510151869.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:50.256Z,1510151870.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:50.272Z,1510151870.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:50.930Z,1510151870.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:50.961Z,1510151870.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:51.077Z,1510151871.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:51.122Z,1510151871.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:51.503Z,1510151871.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:51.523Z,1510151871.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:51.900Z,1510151871.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:51.916Z,1510151871.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:52.299Z,1510151872.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:52.315Z,1510151872.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:52.683Z,1510151872.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:52.718Z,1510151872.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:53.083Z,1510151873.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:53.125Z,1510151873.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:53.480Z,1510151873.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:53.504Z,1510151873.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:53.885Z,1510151873.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:53.913Z,1510151873.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:54.315Z,1510151874.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:54.335Z,1510151874.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:54.679Z,1510151874.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:54.696Z,1510151874.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:55.083Z,1510151875.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:55.124Z,1510151875.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:55.483Z,1510151875.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:55.499Z,1510151875.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:55.883Z,1510151875.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:55.900Z,1510151875.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:56.287Z,1510151876.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:56.329Z,1510151876.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:56.684Z,1510151876.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:56.700Z,1510151876.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:57.083Z,1510151877.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:57.100Z,1510151877.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:57.484Z,1510151877.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:57.500Z,1510151877.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:57.884Z,1510151877.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:57.900Z,1510151877.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:58.284Z,1510151878.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:58.300Z,1510151878.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:58.683Z,1510151878.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:58.700Z,1510151878.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:59.079Z,1510151879.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:59.096Z,1510151879.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:59.479Z,1510151879.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:59.496Z,1510151879.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:37:59.883Z,1510151879.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:37:59.900Z,1510151879.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:00.284Z,1510151880.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:00.321Z,1510151880.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:00.686Z,1510151880.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:00.703Z,1510151880.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:01.086Z,1510151881.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:01.103Z,1510151881.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:01.485Z,1510151881.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:01.507Z,1510151881.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:01.886Z,1510151881.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:01.903Z,1510151881.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:02.286Z,1510151882.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:02.303Z,1510151882.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:02.685Z,1510151882.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:02.707Z,1510151882.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:03.097Z,1510151883.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:03.114Z,1510151883.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:03.777Z,1510151883.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:03.812Z,1510151883.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:03.956Z,1510151883.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:03.999Z,1510151883.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:04.377Z,1510151884.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:04.393Z,1510151884.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:04.776Z,1510151884.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:04.813Z,1510151884.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:05.166Z,1510151885.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:05.200Z,1510151885.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:05.556Z,1510151885.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:05.572Z,1510151885.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:05.956Z,1510151885.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:05.999Z,1510151885.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:06.388Z,1510151886.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:06.405Z,1510151886.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:06.755Z,1510151886.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:06.815Z,1510151886.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:07.155Z,1510151887.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:07.176Z,1510151887.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:07.565Z,1510151887.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:07.598Z,1510151887.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:08.258Z,1510151888.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:08.274Z,1510151888.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:08.400Z,1510151888.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:08.443Z,1510151888.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:08.809Z,1510151888.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:08.825Z,1510151888.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:09.210Z,1510151889.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:09.227Z,1510151889.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:09.606Z,1510151889.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:09.622Z,1510151889.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:10.001Z,1510151890.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:10.023Z,1510151890.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:10.400Z,1510151890.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:10.423Z,1510151890.423 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:10.424Z,1510151890.424 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2017-11-08T14:38:10.424Z,1510151890.424 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T14:38:10.426Z,1510151890.426 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:10.426Z,1510151890.426 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25
2017-11-08T14:38:10.426Z,1510151890.426 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T14:38:10.428Z,1510151890.428 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:10.428Z,1510151890.428 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 25
2017-11-08T14:38:10.428Z,1510151890.428 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T14:38:10.525Z,1510151890.525 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T14:38:10.525Z,1510151890.525 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T14:38:10.526Z,1510151890.526 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T14:38:10.798Z,1510151890.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:10.893Z,1510151890.893 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T14:38:10.893Z,1510151890.893 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2017-11-08T14:38:10.893Z,1510151890.893 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T14:38:10.893Z,1510151890.893 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25
2017-11-08T14:38:10.894Z,1510151890.894 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T14:38:10.894Z,1510151890.894 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 25
2017-11-08T14:38:11.222Z,1510151891.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:11.259Z,1510151891.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T14:38:11.260Z,1510151891.260 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:38:11.260Z,1510151891.260 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:38:11.260Z,1510151891.260 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T14:38:11.261Z,1510151891.261 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:38:11.261Z,1510151891.261 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:38:11.262Z,1510151891.262 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T14:38:11.262Z,1510151891.262 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:38:11.262Z,1510151891.262 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:38:11.612Z,1510151891.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:11.635Z,1510151891.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T14:38:11.636Z,1510151891.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:12.279Z,1510151892.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:12.313Z,1510151892.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2017-11-08T14:38:12.314Z,1510151892.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:12.428Z,1510151892.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:12.463Z,1510151892.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T14:38:12.465Z,1510151892.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:12.834Z,1510151892.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:12.855Z,1510151892.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T14:38:12.857Z,1510151892.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:13.234Z,1510151893.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:13.264Z,1510151893.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T14:38:13.265Z,1510151893.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:13.634Z,1510151893.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:13.664Z,1510151893.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T14:38:13.665Z,1510151893.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:14.022Z,1510151894.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:14.038Z,1510151894.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T14:38:14.039Z,1510151894.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:14.418Z,1510151894.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:14.433Z,1510151894.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T14:38:14.434Z,1510151894.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:14.822Z,1510151894.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:14.869Z,1510151894.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T14:38:14.870Z,1510151894.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:15.245Z,1510151895.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:15.269Z,1510151895.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T14:38:15.270Z,1510151895.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:15.629Z,1510151895.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:15.645Z,1510151895.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T14:38:15.646Z,1510151895.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:16.418Z,1510151896.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:16.439Z,1510151896.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T14:38:16.440Z,1510151896.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:16.537Z,1510151896.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:16.569Z,1510151896.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-08T14:38:16.570Z,1510151896.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:16.954Z,1510151896.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:16.979Z,1510151896.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-08T14:38:16.981Z,1510151896.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:17.365Z,1510151897.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:17.381Z,1510151897.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2017-11-08T14:38:17.382Z,1510151897.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:17.754Z,1510151897.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:17.779Z,1510151897.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2017-11-08T14:38:17.781Z,1510151897.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:18.143Z,1510151898.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:18.175Z,1510151898.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2017-11-08T14:38:18.176Z,1510151898.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:18.539Z,1510151898.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:18.555Z,1510151898.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T14:38:18.556Z,1510151898.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:18.940Z,1510151898.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:18.983Z,1510151898.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2017-11-08T14:38:18.984Z,1510151898.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:19.373Z,1510151899.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:19.389Z,1510151899.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2017-11-08T14:38:19.390Z,1510151899.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:19.753Z,1510151899.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:19.787Z,1510151899.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2017-11-08T14:38:19.788Z,1510151899.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:20.437Z,1510151900.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:20.453Z,1510151900.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T14:38:20.454Z,1510151900.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:20.588Z,1510151900.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:20.604Z,1510151900.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2017-11-08T14:38:20.605Z,1510151900.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:20.990Z,1510151900.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:21.005Z,1510151901.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2017-11-08T14:38:21.006Z,1510151901.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:21.390Z,1510151901.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:21.406Z,1510151901.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2017-11-08T14:38:21.407Z,1510151901.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:21.790Z,1510151901.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:21.806Z,1510151901.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2017-11-08T14:38:21.807Z,1510151901.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:22.183Z,1510151902.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:22.199Z,1510151902.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2017-11-08T14:38:22.200Z,1510151902.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:22.586Z,1510151902.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:22.602Z,1510151902.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2017-11-08T14:38:22.603Z,1510151902.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:23.002Z,1510151903.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:23.026Z,1510151903.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2017-11-08T14:38:23.027Z,1510151903.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:23.390Z,1510151903.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:23.405Z,1510151903.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2017-11-08T14:38:23.406Z,1510151903.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:25.258Z,1510151905.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:25.307Z,1510151905.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T14:38:25.308Z,1510151905.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:25.443Z,1510151905.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:25.458Z,1510151905.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2017-11-08T14:38:25.459Z,1510151905.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:25.846Z,1510151905.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:25.854Z,1510151905.854 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-08T14:38:25.854Z,1510151905.854 [BPC1] Data Fault, FailCount= 1
2017-11-08T14:38:25.854Z,1510151905.854 [BPC1](ERROR): Data Fault
2017-11-08T14:38:25.863Z,1510151905.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2017-11-08T14:38:25.864Z,1510151905.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:25.961Z,1510151905.961 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T14:38:26.245Z,1510151906.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:26.262Z,1510151906.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-08T14:38:26.263Z,1510151906.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:26.645Z,1510151906.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:26.667Z,1510151906.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-08T14:38:26.668Z,1510151906.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:27.030Z,1510151907.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:27.054Z,1510151907.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-08T14:38:27.055Z,1510151907.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:27.145Z,1510151907.145 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T14:38:27.145Z,1510151907.145 [BPC1] No Fault, FailCount= 1
2017-11-08T14:38:27.433Z,1510151907.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:27.499Z,1510151907.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2017-11-08T14:38:27.500Z,1510151907.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:27.839Z,1510151907.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:27.854Z,1510151907.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-08T14:38:27.855Z,1510151907.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:28.258Z,1510151908.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:28.273Z,1510151908.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2017-11-08T14:38:28.274Z,1510151908.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:28.646Z,1510151908.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:28.697Z,1510151908.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2017-11-08T14:38:28.698Z,1510151908.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:29.034Z,1510151909.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:29.062Z,1510151909.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-08T14:38:29.063Z,1510151909.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:29.437Z,1510151909.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:29.453Z,1510151909.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-08T14:38:29.454Z,1510151909.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:29.836Z,1510151909.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:29.852Z,1510151909.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-08T14:38:29.853Z,1510151909.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:30.237Z,1510151910.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:30.253Z,1510151910.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-08T14:38:30.253Z,1510151910.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:30.633Z,1510151910.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:30.653Z,1510151910.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:31.036Z,1510151911.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:31.052Z,1510151911.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:31.437Z,1510151911.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:31.452Z,1510151911.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:31.836Z,1510151911.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:31.853Z,1510151911.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:32.236Z,1510151912.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:32.253Z,1510151912.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:32.638Z,1510151912.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:32.653Z,1510151912.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:33.035Z,1510151913.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:33.055Z,1510151913.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:33.436Z,1510151913.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:33.459Z,1510151913.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:33.837Z,1510151913.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:33.853Z,1510151913.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:34.238Z,1510151914.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:34.312Z,1510151914.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:34.636Z,1510151914.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:34.652Z,1510151914.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:35.036Z,1510151915.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:35.051Z,1510151915.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:35.437Z,1510151915.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:35.453Z,1510151915.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:35.835Z,1510151915.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:35.895Z,1510151915.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:36.231Z,1510151916.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:36.266Z,1510151916.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:36.631Z,1510151916.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:36.668Z,1510151916.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:37.051Z,1510151917.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:37.067Z,1510151917.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:37.718Z,1510151917.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:37.754Z,1510151917.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:37.861Z,1510151917.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:37.903Z,1510151917.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:38.278Z,1510151918.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:38.308Z,1510151918.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:38.689Z,1510151918.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:38.705Z,1510151918.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:39.074Z,1510151919.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:39.105Z,1510151919.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:39.467Z,1510151919.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:39.500Z,1510151919.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:39.864Z,1510151919.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:39.880Z,1510151919.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:40.290Z,1510151920.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:40.311Z,1510151920.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:40.667Z,1510151920.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:40.684Z,1510151920.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:41.067Z,1510151921.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:41.084Z,1510151921.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:41.478Z,1510151921.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:41.510Z,1510151921.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:42.167Z,1510151922.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:42.184Z,1510151922.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:42.318Z,1510151922.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:42.363Z,1510151922.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:42.726Z,1510151922.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:42.748Z,1510151922.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:43.127Z,1510151923.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:43.143Z,1510151923.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:43.527Z,1510151923.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:43.548Z,1510151923.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:43.917Z,1510151923.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:43.934Z,1510151923.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:44.317Z,1510151924.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:44.333Z,1510151924.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:44.718Z,1510151924.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:44.735Z,1510151924.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:45.138Z,1510151925.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:45.154Z,1510151925.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:45.526Z,1510151925.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:45.547Z,1510151925.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:46.202Z,1510151926.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:46.232Z,1510151926.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:46.347Z,1510151926.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:46.403Z,1510151926.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:46.764Z,1510151926.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:46.781Z,1510151926.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:47.168Z,1510151927.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:47.185Z,1510151927.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:47.554Z,1510151927.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:47.582Z,1510151927.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:47.947Z,1510151927.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:48.006Z,1510151928.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:48.346Z,1510151928.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:48.362Z,1510151928.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:48.751Z,1510151928.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:48.771Z,1510151928.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:49.173Z,1510151929.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:49.224Z,1510151929.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:49.561Z,1510151929.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:49.593Z,1510151929.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:50.244Z,1510151930.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:50.303Z,1510151930.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:50.415Z,1510151930.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:50.459Z,1510151930.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:50.830Z,1510151930.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:50.867Z,1510151930.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:51.226Z,1510151931.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:51.242Z,1510151931.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:51.629Z,1510151931.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:51.666Z,1510151931.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:52.018Z,1510151932.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:52.034Z,1510151932.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:52.417Z,1510151932.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:52.433Z,1510151932.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:52.818Z,1510151932.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:52.835Z,1510151932.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:53.247Z,1510151933.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:53.271Z,1510151933.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:53.629Z,1510151933.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:53.646Z,1510151933.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:54.305Z,1510151934.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:54.321Z,1510151934.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:54.439Z,1510151934.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:54.480Z,1510151934.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:54.850Z,1510151934.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:54.880Z,1510151934.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:55.260Z,1510151935.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:55.279Z,1510151935.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:55.661Z,1510151935.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:55.683Z,1510151935.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:56.035Z,1510151936.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:56.075Z,1510151936.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:56.439Z,1510151936.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:56.463Z,1510151936.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:56.840Z,1510151936.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:56.855Z,1510151936.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:57.268Z,1510151937.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:57.290Z,1510151937.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:57.653Z,1510151937.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:57.698Z,1510151937.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:58.323Z,1510151938.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:58.375Z,1510151938.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:58.488Z,1510151938.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:58.504Z,1510151938.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:58.917Z,1510151938.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:58.934Z,1510151938.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:59.304Z,1510151939.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:59.331Z,1510151939.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:38:59.703Z,1510151939.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:38:59.728Z,1510151939.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:00.094Z,1510151940.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:00.127Z,1510151940.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:00.492Z,1510151940.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:00.507Z,1510151940.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:00.889Z,1510151940.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:00.935Z,1510151940.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:01.320Z,1510151941.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:01.326Z,1510151941.326 [PNI_TCM](ERROR): CRC does not match. Expected:0x23085 got:0x4096
2017-11-08T14:39:01.355Z,1510151941.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:01.701Z,1510151941.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:01.734Z,1510151941.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:02.390Z,1510151942.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:02.412Z,1510151942.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:02.545Z,1510151942.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:02.570Z,1510151942.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:02.953Z,1510151942.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:02.989Z,1510151942.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:03.358Z,1510151943.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:03.411Z,1510151943.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:03.754Z,1510151943.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:03.785Z,1510151943.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:04.142Z,1510151944.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:04.158Z,1510151944.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:04.538Z,1510151944.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:04.555Z,1510151944.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:04.943Z,1510151944.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:04.964Z,1510151944.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:05.364Z,1510151945.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:05.395Z,1510151945.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:05.753Z,1510151945.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:05.790Z,1510151945.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:06.432Z,1510151946.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:06.449Z,1510151946.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:06.561Z,1510151946.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:06.590Z,1510151946.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:06.985Z,1510151946.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:07.001Z,1510151947.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:07.388Z,1510151947.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:07.411Z,1510151947.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:07.785Z,1510151947.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:07.801Z,1510151947.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:08.167Z,1510151948.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:08.199Z,1510151948.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:08.567Z,1510151948.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:08.599Z,1510151948.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:08.968Z,1510151948.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:08.999Z,1510151948.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:09.399Z,1510151949.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:09.419Z,1510151949.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:09.767Z,1510151949.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:09.802Z,1510151949.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:10.189Z,1510151950.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:10.271Z,1510151950.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:10.862Z,1510151950.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:10.896Z,1510151950.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:11.015Z,1510151951.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:11.068Z,1510151951.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:11.437Z,1510151951.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:11.453Z,1510151951.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:11.836Z,1510151951.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:11.898Z,1510151951.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:12.226Z,1510151952.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:12.255Z,1510151952.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:12.616Z,1510151952.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:12.650Z,1510151952.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:13.043Z,1510151953.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:13.060Z,1510151953.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:13.425Z,1510151953.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:13.459Z,1510151953.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:14.101Z,1510151954.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:14.117Z,1510151954.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:14.217Z,1510151954.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:14.255Z,1510151954.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:14.639Z,1510151954.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:14.655Z,1510151954.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:15.043Z,1510151955.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:15.059Z,1510151955.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:15.440Z,1510151955.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:15.456Z,1510151955.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:15.823Z,1510151955.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:15.855Z,1510151955.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:16.227Z,1510151956.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:16.269Z,1510151956.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:16.620Z,1510151956.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:16.650Z,1510151956.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:17.050Z,1510151957.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:17.066Z,1510151957.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:17.423Z,1510151957.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:17.448Z,1510151957.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:17.843Z,1510151957.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:17.859Z,1510151957.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:18.515Z,1510151958.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:18.548Z,1510151958.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:18.661Z,1510151958.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:18.711Z,1510151958.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:19.050Z,1510151959.050 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T14:39:19.050Z,1510151959.050 [NAL9602] Data Fault, FailCount= 3
2017-11-08T14:39:19.050Z,1510151959.050 [NAL9602](ERROR): Data Fault
2017-11-08T14:39:19.068Z,1510151959.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:19.104Z,1510151959.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:19.190Z,1510151959.190 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T14:39:19.450Z,1510151959.450 [NAL9602](INFO): Powering down
2017-11-08T14:39:19.468Z,1510151959.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:19.484Z,1510151959.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:19.867Z,1510151959.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:19.924Z,1510151959.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:20.266Z,1510151960.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:20.283Z,1510151960.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:20.394Z,1510151960.394 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T14:39:20.394Z,1510151960.394 [NAL9602] No Fault, FailCount= 3
2017-11-08T14:39:20.663Z,1510151960.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:20.679Z,1510151960.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:21.067Z,1510151961.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:21.083Z,1510151961.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:21.466Z,1510151961.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:21.483Z,1510151961.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:21.867Z,1510151961.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:21.883Z,1510151961.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:22.267Z,1510151962.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:22.284Z,1510151962.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:22.666Z,1510151962.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:22.682Z,1510151962.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:23.067Z,1510151963.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:23.083Z,1510151963.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:23.467Z,1510151963.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:23.483Z,1510151963.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:23.863Z,1510151963.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:23.879Z,1510151963.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:24.267Z,1510151964.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:24.284Z,1510151964.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:24.663Z,1510151964.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:24.684Z,1510151964.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:25.066Z,1510151965.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:25.128Z,1510151965.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:25.466Z,1510151965.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:25.484Z,1510151965.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:25.867Z,1510151965.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:25.883Z,1510151965.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:26.263Z,1510151966.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:26.278Z,1510151966.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:26.666Z,1510151966.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:26.684Z,1510151966.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:27.067Z,1510151967.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:27.084Z,1510151967.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:27.466Z,1510151967.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:27.482Z,1510151967.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:27.867Z,1510151967.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:27.884Z,1510151967.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:28.271Z,1510151968.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:28.312Z,1510151968.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:28.671Z,1510151968.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:28.711Z,1510151968.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:29.067Z,1510151969.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:29.084Z,1510151969.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:29.471Z,1510151969.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:29.487Z,1510151969.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:29.866Z,1510151969.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:29.883Z,1510151969.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:30.267Z,1510151970.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:30.284Z,1510151970.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:30.671Z,1510151970.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:30.687Z,1510151970.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:31.069Z,1510151971.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:31.085Z,1510151971.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:31.470Z,1510151971.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:31.487Z,1510151971.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:31.871Z,1510151971.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:31.920Z,1510151971.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:32.271Z,1510151972.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:32.287Z,1510151972.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:32.667Z,1510151972.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:32.723Z,1510151972.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:33.071Z,1510151973.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:33.088Z,1510151973.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:33.471Z,1510151973.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:33.524Z,1510151973.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:33.871Z,1510151973.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:33.916Z,1510151973.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:34.270Z,1510151974.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:34.288Z,1510151974.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:34.670Z,1510151974.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:34.687Z,1510151974.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:35.071Z,1510151975.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:35.092Z,1510151975.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:35.466Z,1510151975.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:35.482Z,1510151975.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:35.870Z,1510151975.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:35.886Z,1510151975.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:36.270Z,1510151976.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:36.287Z,1510151976.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:36.666Z,1510151976.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:36.682Z,1510151976.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:37.070Z,1510151977.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:37.086Z,1510151977.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:37.470Z,1510151977.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:37.486Z,1510151977.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:37.866Z,1510151977.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:37.882Z,1510151977.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:38.270Z,1510151978.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:38.286Z,1510151978.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:38.676Z,1510151978.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:38.755Z,1510151978.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:39.066Z,1510151979.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:39.120Z,1510151979.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:39.483Z,1510151979.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:39.509Z,1510151979.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:39.863Z,1510151979.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:39.880Z,1510151979.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:40.267Z,1510151980.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:40.283Z,1510151980.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:40.667Z,1510151980.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:40.683Z,1510151980.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:41.067Z,1510151981.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:41.084Z,1510151981.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:41.470Z,1510151981.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:41.486Z,1510151981.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:41.870Z,1510151981.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:41.921Z,1510151981.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:42.270Z,1510151982.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:42.287Z,1510151982.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:42.671Z,1510151982.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:42.688Z,1510151982.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:43.066Z,1510151983.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:43.082Z,1510151983.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:43.470Z,1510151983.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:43.486Z,1510151983.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:43.866Z,1510151983.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:43.882Z,1510151983.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:44.267Z,1510151984.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:44.283Z,1510151984.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:44.664Z,1510151984.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:44.680Z,1510151984.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:45.066Z,1510151985.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:45.082Z,1510151985.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:45.467Z,1510151985.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:45.483Z,1510151985.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:45.870Z,1510151985.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:45.886Z,1510151985.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:46.271Z,1510151986.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:46.287Z,1510151986.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:46.666Z,1510151986.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:46.683Z,1510151986.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:47.067Z,1510151987.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:47.083Z,1510151987.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:47.471Z,1510151987.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:47.488Z,1510151987.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:47.867Z,1510151987.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:47.883Z,1510151987.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:48.266Z,1510151988.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:48.282Z,1510151988.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:48.671Z,1510151988.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:48.688Z,1510151988.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:49.068Z,1510151989.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:49.104Z,1510151989.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:49.453Z,1510151989.453 [NAL9602](INFO): Powering up NAL9602
2017-11-08T14:39:49.471Z,1510151989.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:49.487Z,1510151989.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:49.870Z,1510151989.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:49.887Z,1510151989.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:50.270Z,1510151990.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:50.286Z,1510151990.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:50.668Z,1510151990.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:50.685Z,1510151990.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:51.069Z,1510151991.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:51.087Z,1510151991.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:51.469Z,1510151991.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:51.486Z,1510151991.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:51.869Z,1510151991.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:51.886Z,1510151991.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:52.270Z,1510151992.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:52.286Z,1510151992.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:52.669Z,1510151992.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:52.734Z,1510151992.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:53.069Z,1510151993.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:53.085Z,1510151993.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:53.469Z,1510151993.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:53.492Z,1510151993.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:53.870Z,1510151993.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:53.935Z,1510151993.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:54.265Z,1510151994.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:54.281Z,1510151994.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:54.669Z,1510151994.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:54.727Z,1510151994.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:55.070Z,1510151995.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:55.085Z,1510151995.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:55.465Z,1510151995.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:55.516Z,1510151995.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:55.869Z,1510151995.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:55.886Z,1510151995.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:56.269Z,1510151996.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:56.285Z,1510151996.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:56.665Z,1510151996.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:56.681Z,1510151996.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:57.068Z,1510151997.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:57.085Z,1510151997.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:57.469Z,1510151997.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:57.485Z,1510151997.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:57.869Z,1510151997.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:57.885Z,1510151997.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:58.267Z,1510151998.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:58.283Z,1510151998.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:58.670Z,1510151998.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:58.686Z,1510151998.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:59.065Z,1510151999.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:59.081Z,1510151999.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:59.469Z,1510151999.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:59.486Z,1510151999.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:39:59.869Z,1510151999.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:39:59.885Z,1510151999.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:00.278Z,1510152000.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:00.293Z,1510152000.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:00.653Z,1510152000.653 [NAL9602](INFO): NAL9602 initialized
2017-11-08T14:40:00.670Z,1510152000.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:00.687Z,1510152000.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:01.070Z,1510152001.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:01.086Z,1510152001.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:01.477Z,1510152001.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:01.493Z,1510152001.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:01.882Z,1510152001.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:01.918Z,1510152001.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:02.282Z,1510152002.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:02.310Z,1510152002.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:02.670Z,1510152002.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:02.686Z,1510152002.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:03.070Z,1510152003.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:03.087Z,1510152003.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:03.466Z,1510152003.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:03.491Z,1510152003.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:03.889Z,1510152003.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:03.933Z,1510152003.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:04.282Z,1510152004.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:04.298Z,1510152004.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:04.957Z,1510152004.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:04.976Z,1510152004.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:05.089Z,1510152005.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:05.139Z,1510152005.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:05.516Z,1510152005.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:05.532Z,1510152005.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:05.912Z,1510152005.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:05.928Z,1510152005.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:06.313Z,1510152006.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:06.329Z,1510152006.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:06.695Z,1510152006.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:06.728Z,1510152006.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:07.095Z,1510152007.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:07.131Z,1510152007.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:07.496Z,1510152007.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:07.512Z,1510152007.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:07.927Z,1510152007.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:07.943Z,1510152007.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:08.291Z,1510152008.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:08.307Z,1510152008.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:08.705Z,1510152008.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:08.730Z,1510152008.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:09.428Z,1510152009.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:09.444Z,1510152009.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:09.564Z,1510152009.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:09.607Z,1510152009.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:09.991Z,1510152009.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:10.007Z,1510152010.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:10.391Z,1510152010.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:10.412Z,1510152010.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:10.783Z,1510152010.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:10.800Z,1510152010.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:11.178Z,1510152011.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:11.199Z,1510152011.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:11.578Z,1510152011.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:11.594Z,1510152011.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:11.990Z,1510152011.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:12.012Z,1510152012.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:12.391Z,1510152012.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:12.407Z,1510152012.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:13.057Z,1510152013.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:13.086Z,1510152013.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:13.207Z,1510152013.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:13.248Z,1510152013.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:13.629Z,1510152013.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:13.646Z,1510152013.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:14.028Z,1510152014.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:14.044Z,1510152014.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:14.417Z,1510152014.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:14.452Z,1510152014.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:14.808Z,1510152014.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:14.861Z,1510152014.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:15.207Z,1510152015.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:15.240Z,1510152015.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:15.608Z,1510152015.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:15.660Z,1510152015.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:16.033Z,1510152016.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:16.057Z,1510152016.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:16.410Z,1510152016.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:16.464Z,1510152016.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:16.817Z,1510152016.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:16.833Z,1510152016.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:17.486Z,1510152017.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:17.554Z,1510152017.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:17.668Z,1510152017.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:17.715Z,1510152017.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:18.078Z,1510152018.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:18.111Z,1510152018.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:18.484Z,1510152018.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:18.509Z,1510152018.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:18.880Z,1510152018.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:18.910Z,1510152018.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:19.264Z,1510152019.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:19.311Z,1510152019.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:19.702Z,1510152019.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:19.718Z,1510152019.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:20.079Z,1510152020.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:20.112Z,1510152020.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:20.754Z,1510152020.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:20.770Z,1510152020.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:20.873Z,1510152020.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:20.925Z,1510152020.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:21.302Z,1510152021.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:21.318Z,1510152021.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:21.701Z,1510152021.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:21.716Z,1510152021.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:22.097Z,1510152022.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:22.113Z,1510152022.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:22.479Z,1510152022.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:22.515Z,1510152022.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:22.875Z,1510152022.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:22.911Z,1510152022.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:23.282Z,1510152023.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:23.308Z,1510152023.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:23.710Z,1510152023.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:23.732Z,1510152023.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:24.079Z,1510152024.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:24.115Z,1510152024.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:24.503Z,1510152024.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:24.520Z,1510152024.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:25.174Z,1510152025.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:25.207Z,1510152025.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:25.323Z,1510152025.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:25.355Z,1510152025.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:25.749Z,1510152025.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:25.804Z,1510152025.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:26.137Z,1510152026.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:26.167Z,1510152026.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:26.537Z,1510152026.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:26.568Z,1510152026.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:26.926Z,1510152026.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:26.942Z,1510152026.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:27.332Z,1510152027.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:27.348Z,1510152027.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:27.745Z,1510152027.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:27.771Z,1510152027.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:28.137Z,1510152028.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:28.173Z,1510152028.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:28.815Z,1510152028.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:28.831Z,1510152028.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:28.941Z,1510152028.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:28.965Z,1510152028.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:29.365Z,1510152029.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:29.382Z,1510152029.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:29.766Z,1510152029.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:29.784Z,1510152029.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:30.156Z,1510152030.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:30.182Z,1510152030.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:30.547Z,1510152030.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:30.572Z,1510152030.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:30.947Z,1510152030.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:30.983Z,1510152030.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:31.348Z,1510152031.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:31.380Z,1510152031.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:31.781Z,1510152031.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:31.797Z,1510152031.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:32.147Z,1510152032.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:32.188Z,1510152032.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:32.561Z,1510152032.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:32.590Z,1510152032.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:33.237Z,1510152033.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:33.253Z,1510152033.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:33.363Z,1510152033.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:33.400Z,1510152033.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:33.774Z,1510152033.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:33.810Z,1510152033.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:34.178Z,1510152034.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:34.204Z,1510152034.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:34.578Z,1510152034.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:34.604Z,1510152034.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:34.967Z,1510152034.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:35.006Z,1510152035.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:35.364Z,1510152035.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:35.383Z,1510152035.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:35.800Z,1510152035.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:35.817Z,1510152035.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:36.178Z,1510152036.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:36.207Z,1510152036.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:36.845Z,1510152036.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:36.891Z,1510152036.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:37.031Z,1510152037.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:37.065Z,1510152037.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:37.434Z,1510152037.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:37.465Z,1510152037.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:37.841Z,1510152037.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:37.885Z,1510152037.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:38.248Z,1510152038.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:38.272Z,1510152038.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:38.627Z,1510152038.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:38.644Z,1510152038.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:39.027Z,1510152039.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:39.090Z,1510152039.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:39.428Z,1510152039.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:39.444Z,1510152039.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:39.854Z,1510152039.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:39.900Z,1510152039.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:40.227Z,1510152040.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:40.242Z,1510152040.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:40.645Z,1510152040.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:40.669Z,1510152040.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:41.316Z,1510152041.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:41.332Z,1510152041.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:41.434Z,1510152041.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:41.475Z,1510152041.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:41.864Z,1510152041.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:41.880Z,1510152041.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:42.259Z,1510152042.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:42.275Z,1510152042.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:42.657Z,1510152042.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:42.675Z,1510152042.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:43.040Z,1510152043.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:43.070Z,1510152043.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:43.441Z,1510152043.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:43.475Z,1510152043.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:43.871Z,1510152043.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:43.887Z,1510152043.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:44.266Z,1510152044.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:44.283Z,1510152044.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:44.920Z,1510152044.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:44.936Z,1510152044.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:45.035Z,1510152045.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:45.080Z,1510152045.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:45.460Z,1510152045.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:45.484Z,1510152045.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:45.860Z,1510152045.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:45.876Z,1510152045.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:46.257Z,1510152046.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:46.274Z,1510152046.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:46.639Z,1510152046.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:46.668Z,1510152046.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:47.039Z,1510152047.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:47.074Z,1510152047.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:47.436Z,1510152047.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:47.452Z,1510152047.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:47.871Z,1510152047.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:47.889Z,1510152047.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:48.235Z,1510152048.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:48.289Z,1510152048.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:48.655Z,1510152048.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:48.682Z,1510152048.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:49.326Z,1510152049.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:49.344Z,1510152049.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:49.455Z,1510152049.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:49.501Z,1510152049.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:49.876Z,1510152049.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:49.899Z,1510152049.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:50.275Z,1510152050.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:50.295Z,1510152050.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:50.667Z,1510152050.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:50.684Z,1510152050.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:51.055Z,1510152051.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:51.080Z,1510152051.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:51.456Z,1510152051.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:51.484Z,1510152051.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:51.878Z,1510152051.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:51.894Z,1510152051.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:52.276Z,1510152052.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:52.299Z,1510152052.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:52.942Z,1510152052.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:52.978Z,1510152052.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:53.086Z,1510152053.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:53.134Z,1510152053.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:53.513Z,1510152053.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:53.529Z,1510152053.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:53.912Z,1510152053.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:53.928Z,1510152053.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:54.297Z,1510152054.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:54.330Z,1510152054.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:54.691Z,1510152054.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:54.707Z,1510152054.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:55.096Z,1510152055.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:55.112Z,1510152055.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:55.496Z,1510152055.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:55.512Z,1510152055.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:55.921Z,1510152055.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:55.937Z,1510152055.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:56.291Z,1510152056.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:56.312Z,1510152056.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:56.705Z,1510152056.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:56.744Z,1510152056.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:57.381Z,1510152057.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:57.403Z,1510152057.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:57.515Z,1510152057.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:57.548Z,1510152057.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:57.922Z,1510152057.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:57.954Z,1510152057.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:58.333Z,1510152058.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:58.355Z,1510152058.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:58.736Z,1510152058.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:58.776Z,1510152058.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:59.111Z,1510152059.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:59.151Z,1510152059.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:59.508Z,1510152059.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:59.531Z,1510152059.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:40:59.944Z,1510152059.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:40:59.960Z,1510152059.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:00.325Z,1510152060.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:00.376Z,1510152060.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:00.992Z,1510152060.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:01.008Z,1510152061.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:01.127Z,1510152061.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:01.159Z,1510152061.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:01.534Z,1510152061.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:01.598Z,1510152061.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:01.933Z,1510152061.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:01.958Z,1510152061.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:02.344Z,1510152062.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:02.407Z,1510152062.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:02.723Z,1510152062.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:02.757Z,1510152062.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:03.119Z,1510152063.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:03.135Z,1510152063.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:03.524Z,1510152063.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:03.540Z,1510152063.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:03.955Z,1510152063.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:03.979Z,1510152063.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:04.320Z,1510152064.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:04.343Z,1510152064.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:04.733Z,1510152064.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:04.765Z,1510152064.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:05.418Z,1510152065.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:05.434Z,1510152065.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:05.534Z,1510152065.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:05.583Z,1510152065.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:05.950Z,1510152065.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:05.975Z,1510152065.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:06.353Z,1510152066.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:06.378Z,1510152066.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:06.749Z,1510152066.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:06.798Z,1510152066.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:07.140Z,1510152067.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:07.178Z,1510152067.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:07.544Z,1510152067.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:07.579Z,1510152067.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:07.969Z,1510152067.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:07.986Z,1510152067.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:08.354Z,1510152068.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:08.386Z,1510152068.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:09.023Z,1510152069.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:09.039Z,1510152069.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:09.147Z,1510152069.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:09.178Z,1510152069.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:09.565Z,1510152069.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:09.581Z,1510152069.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:09.965Z,1510152069.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:09.981Z,1510152069.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:10.353Z,1510152070.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:10.388Z,1510152070.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:10.740Z,1510152070.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:10.795Z,1510152070.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:11.144Z,1510152071.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:11.168Z,1510152071.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:11.545Z,1510152071.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:11.578Z,1510152071.578 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:11.578Z,1510152071.578 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2017-11-08T14:41:11.578Z,1510152071.578 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T14:41:11.580Z,1510152071.580 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:11.580Z,1510152071.580 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26
2017-11-08T14:41:11.580Z,1510152071.580 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T14:41:11.586Z,1510152071.586 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:11.586Z,1510152071.586 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 26
2017-11-08T14:41:11.586Z,1510152071.586 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T14:41:11.674Z,1510152071.674 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T14:41:11.674Z,1510152071.674 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T14:41:11.675Z,1510152071.675 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T14:41:11.978Z,1510152071.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:12.093Z,1510152072.093 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T14:41:12.093Z,1510152072.093 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2017-11-08T14:41:12.094Z,1510152072.094 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T14:41:12.094Z,1510152072.094 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26
2017-11-08T14:41:12.095Z,1510152072.095 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T14:41:12.095Z,1510152072.095 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 26
2017-11-08T14:41:12.343Z,1510152072.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:12.358Z,1510152072.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T14:41:12.359Z,1510152072.359 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:41:12.359Z,1510152072.359 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:41:12.359Z,1510152072.359 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T14:41:12.360Z,1510152072.360 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:41:12.360Z,1510152072.360 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:41:12.361Z,1510152072.361 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T14:41:12.361Z,1510152072.361 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:41:12.361Z,1510152072.361 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:41:12.753Z,1510152072.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:12.769Z,1510152072.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T14:41:12.770Z,1510152072.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:13.439Z,1510152073.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:13.459Z,1510152073.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2017-11-08T14:41:13.460Z,1510152073.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:13.567Z,1510152073.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:13.603Z,1510152073.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T14:41:13.604Z,1510152073.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:13.991Z,1510152073.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:14.012Z,1510152074.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2017-11-08T14:41:14.013Z,1510152074.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:14.387Z,1510152074.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:14.404Z,1510152074.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T14:41:14.405Z,1510152074.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:14.787Z,1510152074.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:14.803Z,1510152074.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T14:41:14.805Z,1510152074.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:15.172Z,1510152075.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:15.197Z,1510152075.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T14:41:15.198Z,1510152075.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:15.568Z,1510152075.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:15.602Z,1510152075.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T14:41:15.602Z,1510152075.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:15.999Z,1510152075.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:16.015Z,1510152076.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-08T14:41:16.016Z,1510152076.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:16.389Z,1510152076.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:16.411Z,1510152076.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-08T14:41:16.412Z,1510152076.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:17.066Z,1510152077.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:17.094Z,1510152077.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-08T14:41:17.095Z,1510152077.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:17.204Z,1510152077.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:17.246Z,1510152077.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-08T14:41:17.247Z,1510152077.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:17.617Z,1510152077.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:17.643Z,1510152077.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-08T14:41:17.644Z,1510152077.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:18.022Z,1510152078.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:18.046Z,1510152078.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-08T14:41:18.047Z,1510152078.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:18.410Z,1510152078.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:18.426Z,1510152078.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T14:41:18.427Z,1510152078.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:18.808Z,1510152078.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:18.828Z,1510152078.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-08T14:41:18.833Z,1510152078.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:19.209Z,1510152079.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:19.231Z,1510152079.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T14:41:19.232Z,1510152079.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:19.610Z,1510152079.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:19.626Z,1510152079.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T14:41:19.627Z,1510152079.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:20.033Z,1510152080.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:20.057Z,1510152080.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T14:41:20.058Z,1510152080.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:20.406Z,1510152080.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:20.434Z,1510152080.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T14:41:20.435Z,1510152080.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:20.821Z,1510152080.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:20.889Z,1510152080.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T14:41:20.890Z,1510152080.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:21.494Z,1510152081.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:21.519Z,1510152081.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T14:41:21.520Z,1510152081.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:21.632Z,1510152081.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:21.671Z,1510152081.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T14:41:21.672Z,1510152081.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:22.054Z,1510152082.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:22.075Z,1510152082.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T14:41:22.077Z,1510152082.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:22.445Z,1510152082.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:22.489Z,1510152082.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T14:41:22.490Z,1510152082.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:22.850Z,1510152082.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:22.878Z,1510152082.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T14:41:22.879Z,1510152082.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:23.242Z,1510152083.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:23.277Z,1510152083.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T14:41:23.278Z,1510152083.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:23.675Z,1510152083.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:23.739Z,1510152083.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2017-11-08T14:41:23.740Z,1510152083.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:24.046Z,1510152084.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:24.186Z,1510152084.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2017-11-08T14:41:24.236Z,1510152084.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:25.053Z,1510152085.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:25.092Z,1510152085.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2017-11-08T14:41:25.093Z,1510152085.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:25.228Z,1510152085.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:25.271Z,1510152085.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T14:41:25.272Z,1510152085.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:25.646Z,1510152085.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:25.678Z,1510152085.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T14:41:25.680Z,1510152085.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:26.045Z,1510152086.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:26.074Z,1510152086.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T14:41:26.075Z,1510152086.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:26.441Z,1510152086.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:26.473Z,1510152086.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T14:41:26.474Z,1510152086.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:26.834Z,1510152086.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:26.862Z,1510152086.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T14:41:26.862Z,1510152086.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:27.231Z,1510152087.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:27.251Z,1510152087.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T14:41:27.252Z,1510152087.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:27.653Z,1510152087.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:27.687Z,1510152087.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T14:41:27.688Z,1510152087.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:28.034Z,1510152088.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:28.050Z,1510152088.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T14:41:28.051Z,1510152088.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:28.445Z,1510152088.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:28.460Z,1510152088.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T14:41:28.485Z,1510152088.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:29.117Z,1510152089.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:29.139Z,1510152089.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T14:41:29.140Z,1510152089.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:29.243Z,1510152089.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:29.294Z,1510152089.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T14:41:29.295Z,1510152089.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:29.654Z,1510152089.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:29.679Z,1510152089.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T14:41:29.680Z,1510152089.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:30.057Z,1510152090.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:30.097Z,1510152090.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T14:41:30.098Z,1510152090.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:30.454Z,1510152090.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:30.484Z,1510152090.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T14:41:30.485Z,1510152090.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:30.843Z,1510152090.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:30.858Z,1510152090.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T14:41:30.859Z,1510152090.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:31.244Z,1510152091.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:31.260Z,1510152091.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-08T14:41:31.261Z,1510152091.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:31.674Z,1510152091.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:31.697Z,1510152091.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:32.057Z,1510152092.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:32.089Z,1510152092.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:32.727Z,1510152092.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:32.744Z,1510152092.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:32.863Z,1510152092.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:32.911Z,1510152092.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:33.279Z,1510152093.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:33.339Z,1510152093.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:33.687Z,1510152093.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:33.704Z,1510152093.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:34.083Z,1510152094.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:34.112Z,1510152094.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:34.463Z,1510152094.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:34.490Z,1510152094.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:34.863Z,1510152094.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:34.902Z,1510152094.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:35.265Z,1510152095.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:35.300Z,1510152095.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:35.689Z,1510152095.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:35.705Z,1510152095.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:36.063Z,1510152096.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:36.105Z,1510152096.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:36.486Z,1510152096.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:36.505Z,1510152096.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:37.146Z,1510152097.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:37.162Z,1510152097.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:37.266Z,1510152097.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:37.298Z,1510152097.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:37.691Z,1510152097.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:37.727Z,1510152097.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:38.092Z,1510152098.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:38.099Z,1510152098.099 [PNI_TCM](ERROR): CRC does not match. Expected:0x61086 got:0x11015
2017-11-08T14:41:38.121Z,1510152098.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:38.491Z,1510152098.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:38.507Z,1510152098.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:38.874Z,1510152098.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:38.902Z,1510152098.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:39.271Z,1510152099.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:39.305Z,1510152099.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:39.702Z,1510152099.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:39.722Z,1510152099.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:40.094Z,1510152100.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:40.111Z,1510152100.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:40.754Z,1510152100.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:40.769Z,1510152100.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:40.869Z,1510152100.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:40.921Z,1510152100.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:41.297Z,1510152101.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:41.318Z,1510152101.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:41.698Z,1510152101.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:41.719Z,1510152101.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:42.101Z,1510152102.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:42.117Z,1510152102.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:42.479Z,1510152102.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:42.523Z,1510152102.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:42.876Z,1510152102.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:42.905Z,1510152102.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:43.279Z,1510152103.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:43.297Z,1510152103.297 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-08T14:41:43.323Z,1510152103.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:43.707Z,1510152103.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:43.724Z,1510152103.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:44.076Z,1510152104.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:44.131Z,1510152104.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:44.501Z,1510152104.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:44.517Z,1510152104.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:45.170Z,1510152105.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:45.221Z,1510152105.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:45.321Z,1510152105.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:45.345Z,1510152105.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:45.752Z,1510152105.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:45.807Z,1510152105.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:46.149Z,1510152106.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:46.172Z,1510152106.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:46.537Z,1510152106.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:46.601Z,1510152106.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:46.924Z,1510152106.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:46.940Z,1510152106.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:47.329Z,1510152107.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:47.361Z,1510152107.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:47.757Z,1510152107.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:47.773Z,1510152107.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:48.141Z,1510152108.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:48.176Z,1510152108.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:48.837Z,1510152108.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:48.866Z,1510152108.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:48.979Z,1510152108.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:48.995Z,1510152108.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:49.397Z,1510152109.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:49.431Z,1510152109.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:49.798Z,1510152109.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:49.835Z,1510152109.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:50.194Z,1510152110.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:50.226Z,1510152110.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:50.588Z,1510152110.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:50.604Z,1510152110.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:50.988Z,1510152110.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:51.004Z,1510152111.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:51.387Z,1510152111.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:51.404Z,1510152111.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:51.819Z,1510152111.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:51.839Z,1510152111.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:52.188Z,1510152112.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:52.204Z,1510152112.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:52.593Z,1510152112.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:52.622Z,1510152112.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:53.266Z,1510152113.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:53.285Z,1510152113.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:53.396Z,1510152113.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:53.439Z,1510152113.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:53.821Z,1510152113.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:53.837Z,1510152113.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:54.223Z,1510152114.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:54.246Z,1510152114.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:54.610Z,1510152114.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:54.674Z,1510152114.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:54.000Z,1510152115.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:55.034Z,1510152115.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:55.401Z,1510152115.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:55.435Z,1510152115.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:55.829Z,1510152115.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:55.845Z,1510152115.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:56.221Z,1510152116.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:56.238Z,1510152116.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:56.879Z,1510152116.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:56.903Z,1510152116.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:57.040Z,1510152117.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:57.056Z,1510152117.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:57.450Z,1510152117.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:57.478Z,1510152117.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:57.845Z,1510152117.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:57.861Z,1510152117.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:58.246Z,1510152118.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:58.262Z,1510152118.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:58.635Z,1510152118.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:58.654Z,1510152118.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:59.034Z,1510152119.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:59.050Z,1510152119.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:59.435Z,1510152119.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:59.459Z,1510152119.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:41:59.858Z,1510152119.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:41:59.882Z,1510152119.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:00.233Z,1510152120.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:00.250Z,1510152120.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:00.641Z,1510152120.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:00.658Z,1510152120.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:01.328Z,1510152121.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:01.344Z,1510152121.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:01.442Z,1510152121.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:01.496Z,1510152121.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:01.862Z,1510152121.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:01.897Z,1510152121.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:02.261Z,1510152122.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:02.294Z,1510152122.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:02.662Z,1510152122.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:02.696Z,1510152122.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:03.047Z,1510152123.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:03.064Z,1510152123.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:03.448Z,1510152123.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:03.464Z,1510152123.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:03.878Z,1510152123.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:03.895Z,1510152123.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:04.261Z,1510152124.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:04.287Z,1510152124.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:04.933Z,1510152124.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:04.955Z,1510152124.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:05.067Z,1510152125.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:05.115Z,1510152125.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:05.487Z,1510152125.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:05.509Z,1510152125.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:05.887Z,1510152125.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:05.903Z,1510152125.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:06.283Z,1510152126.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:06.355Z,1510152126.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:06.667Z,1510152126.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:06.742Z,1510152126.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:07.067Z,1510152127.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:07.104Z,1510152127.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:07.468Z,1510152127.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:07.504Z,1510152127.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:07.899Z,1510152127.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:07.956Z,1510152127.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:08.267Z,1510152128.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:08.303Z,1510152128.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:08.677Z,1510152128.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:08.746Z,1510152128.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:09.354Z,1510152129.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:09.370Z,1510152129.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:09.499Z,1510152129.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:09.531Z,1510152129.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:09.909Z,1510152129.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:09.925Z,1510152129.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:10.310Z,1510152130.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:10.326Z,1510152130.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:10.702Z,1510152130.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:10.718Z,1510152130.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:11.101Z,1510152131.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:11.117Z,1510152131.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:11.501Z,1510152131.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:11.517Z,1510152131.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:11.913Z,1510152131.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:11.930Z,1510152131.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:12.309Z,1510152132.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:12.325Z,1510152132.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:12.989Z,1510152132.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:13.011Z,1510152133.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:13.113Z,1510152133.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:13.164Z,1510152133.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:13.541Z,1510152133.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:13.557Z,1510152133.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:13.943Z,1510152133.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:13.959Z,1510152133.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:14.329Z,1510152134.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:14.354Z,1510152134.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:14.723Z,1510152134.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:14.754Z,1510152134.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:15.119Z,1510152135.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:15.152Z,1510152135.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:15.520Z,1510152135.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:15.536Z,1510152135.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:15.952Z,1510152135.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:15.967Z,1510152135.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:16.323Z,1510152136.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:16.363Z,1510152136.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:16.733Z,1510152136.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:16.787Z,1510152136.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:17.404Z,1510152137.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:17.423Z,1510152137.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:17.522Z,1510152137.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:17.566Z,1510152137.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:17.937Z,1510152137.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:17.971Z,1510152137.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:18.349Z,1510152138.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:18.364Z,1510152138.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:18.748Z,1510152138.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:18.764Z,1510152138.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:19.127Z,1510152139.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:19.162Z,1510152139.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:19.524Z,1510152139.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:19.539Z,1510152139.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:19.959Z,1510152139.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:19.975Z,1510152139.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:20.348Z,1510152140.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:20.365Z,1510152140.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:21.010Z,1510152141.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:21.026Z,1510152141.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:21.126Z,1510152141.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:21.171Z,1510152141.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:21.548Z,1510152141.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:21.565Z,1510152141.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:21.957Z,1510152141.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:21.972Z,1510152141.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:22.348Z,1510152142.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:22.365Z,1510152142.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:22.731Z,1510152142.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:22.762Z,1510152142.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:23.132Z,1510152143.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:23.163Z,1510152143.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:23.529Z,1510152143.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:23.566Z,1510152143.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:23.960Z,1510152143.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:23.976Z,1510152143.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:24.331Z,1510152144.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:24.363Z,1510152144.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:24.753Z,1510152144.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:24.769Z,1510152144.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:25.422Z,1510152145.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:25.438Z,1510152145.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:25.569Z,1510152145.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:25.615Z,1510152145.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:25.974Z,1510152145.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:26.006Z,1510152146.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:26.373Z,1510152146.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:26.415Z,1510152146.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:26.778Z,1510152146.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:26.814Z,1510152146.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:27.163Z,1510152147.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:27.180Z,1510152147.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:27.566Z,1510152147.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:27.581Z,1510152147.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:27.986Z,1510152147.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:28.016Z,1510152148.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:28.374Z,1510152148.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:28.438Z,1510152148.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:29.037Z,1510152149.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:29.089Z,1510152149.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:29.190Z,1510152149.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:29.230Z,1510152149.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:29.616Z,1510152149.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:29.633Z,1510152149.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:30.019Z,1510152150.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:30.067Z,1510152150.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:30.418Z,1510152150.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:30.435Z,1510152150.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:30.795Z,1510152150.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:30.860Z,1510152150.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:31.195Z,1510152151.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:31.227Z,1510152151.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:31.592Z,1510152151.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:31.633Z,1510152151.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:32.025Z,1510152152.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:32.041Z,1510152152.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:32.395Z,1510152152.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:32.434Z,1510152152.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:32.805Z,1510152152.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:32.839Z,1510152152.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:33.486Z,1510152153.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:33.502Z,1510152153.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:33.634Z,1510152153.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:33.680Z,1510152153.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:34.042Z,1510152154.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:34.058Z,1510152154.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:34.438Z,1510152154.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:34.455Z,1510152154.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:34.842Z,1510152154.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:34.858Z,1510152154.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:35.232Z,1510152155.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:35.260Z,1510152155.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:35.650Z,1510152155.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:35.667Z,1510152155.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:36.043Z,1510152156.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:36.059Z,1510152156.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:36.710Z,1510152156.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:36.738Z,1510152156.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:36.850Z,1510152156.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:36.901Z,1510152156.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:37.270Z,1510152157.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:37.299Z,1510152157.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:37.670Z,1510152157.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:37.700Z,1510152157.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:38.067Z,1510152158.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:38.096Z,1510152158.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:38.455Z,1510152158.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:38.502Z,1510152158.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:38.851Z,1510152158.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:38.987Z,1510152158.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:39.257Z,1510152159.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:39.372Z,1510152159.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:39.746Z,1510152159.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:39.798Z,1510152159.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:40.055Z,1510152160.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:40.101Z,1510152160.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:40.468Z,1510152160.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:40.506Z,1510152160.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:41.146Z,1510152161.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:41.162Z,1510152161.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:41.262Z,1510152161.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:41.307Z,1510152161.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:41.692Z,1510152161.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:41.702Z,1510152161.702 [PNI_TCM](ERROR): CRC does not match. Expected:0x53264 got:0x49600
2017-11-08T14:42:41.741Z,1510152161.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:42.090Z,1510152162.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:42.107Z,1510152162.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:42.487Z,1510152162.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:42.504Z,1510152162.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:42.870Z,1510152162.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:42.896Z,1510152162.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:43.297Z,1510152163.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:43.344Z,1510152163.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:43.692Z,1510152163.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:43.717Z,1510152163.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:44.084Z,1510152164.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:44.101Z,1510152164.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:44.749Z,1510152164.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:44.772Z,1510152164.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:44.886Z,1510152164.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:44.935Z,1510152164.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:45.306Z,1510152165.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:45.322Z,1510152165.322 [PNI_TCM](ERROR): CRC does not match. Expected:0x64677 got:0x11392
2017-11-08T14:42:45.355Z,1510152165.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:45.705Z,1510152165.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:45.732Z,1510152165.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:46.109Z,1510152166.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:46.144Z,1510152166.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:46.497Z,1510152166.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:46.534Z,1510152166.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:46.893Z,1510152166.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:46.936Z,1510152166.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:47.294Z,1510152167.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:47.311Z,1510152167.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:47.725Z,1510152167.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:47.741Z,1510152167.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:47.821Z,1510152167.821 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T14:42:48.096Z,1510152168.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:48.116Z,1510152168.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:48.509Z,1510152168.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:48.544Z,1510152168.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:49.190Z,1510152169.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:49.207Z,1510152169.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:49.341Z,1510152169.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:49.357Z,1510152169.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:49.748Z,1510152169.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:49.788Z,1510152169.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:50.146Z,1510152170.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:50.163Z,1510152170.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:50.542Z,1510152170.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:50.599Z,1510152170.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:50.935Z,1510152170.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:50.963Z,1510152170.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:51.338Z,1510152171.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:51.410Z,1510152171.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:51.758Z,1510152171.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:51.783Z,1510152171.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:52.147Z,1510152172.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:52.167Z,1510152172.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:52.818Z,1510152172.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:52.872Z,1510152172.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:53.011Z,1510152173.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:53.047Z,1510152173.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:53.426Z,1510152173.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:53.487Z,1510152173.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:53.826Z,1510152173.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:53.859Z,1510152173.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:54.225Z,1510152174.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:54.258Z,1510152174.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:54.611Z,1510152174.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:54.627Z,1510152174.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:55.011Z,1510152175.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:55.031Z,1510152175.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:55.416Z,1510152175.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:55.432Z,1510152175.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:55.840Z,1510152175.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:55.864Z,1510152175.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:56.230Z,1510152176.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:56.255Z,1510152176.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:56.894Z,1510152176.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:56.910Z,1510152176.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:57.032Z,1510152177.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:57.083Z,1510152177.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:57.447Z,1510152177.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:57.464Z,1510152177.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:57.851Z,1510152177.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:57.867Z,1510152177.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:58.252Z,1510152178.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:58.275Z,1510152178.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:58.628Z,1510152178.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:58.664Z,1510152178.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:59.032Z,1510152179.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:59.057Z,1510152179.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:59.436Z,1510152179.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:59.461Z,1510152179.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:42:59.859Z,1510152179.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:42:59.880Z,1510152179.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:00.253Z,1510152180.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:00.269Z,1510152180.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:00.914Z,1510152180.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:00.930Z,1510152180.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:01.064Z,1510152181.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:01.107Z,1510152181.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:01.474Z,1510152181.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:01.520Z,1510152181.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:01.877Z,1510152181.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:01.904Z,1510152181.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:02.278Z,1510152182.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:02.302Z,1510152182.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:02.666Z,1510152182.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:02.682Z,1510152182.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:03.063Z,1510152183.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:03.079Z,1510152183.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:03.468Z,1510152183.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:03.505Z,1510152183.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:03.889Z,1510152183.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:03.905Z,1510152183.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:04.263Z,1510152184.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:04.280Z,1510152184.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:04.673Z,1510152184.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:04.702Z,1510152184.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:05.393Z,1510152185.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:05.415Z,1510152185.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:05.518Z,1510152185.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:05.570Z,1510152185.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:05.934Z,1510152185.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:05.965Z,1510152185.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:06.348Z,1510152186.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:06.363Z,1510152186.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:06.734Z,1510152186.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:06.767Z,1510152186.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:07.123Z,1510152187.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:07.148Z,1510152187.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:07.524Z,1510152187.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:07.540Z,1510152187.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:07.956Z,1510152187.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:07.972Z,1510152187.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:08.338Z,1510152188.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:08.371Z,1510152188.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:09.008Z,1510152189.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:09.031Z,1510152189.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:09.167Z,1510152189.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:09.208Z,1510152189.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:09.578Z,1510152189.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:09.610Z,1510152189.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:09.976Z,1510152189.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:10.008Z,1510152190.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:10.373Z,1510152190.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:10.410Z,1510152190.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:10.763Z,1510152190.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:10.783Z,1510152190.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:11.162Z,1510152191.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:11.178Z,1510152191.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:11.563Z,1510152191.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:11.579Z,1510152191.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:11.986Z,1510152191.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:12.030Z,1510152192.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:12.362Z,1510152192.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:12.379Z,1510152192.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:12.774Z,1510152192.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:12.816Z,1510152192.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:13.455Z,1510152193.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:13.549Z,1510152193.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:13.655Z,1510152193.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:13.699Z,1510152193.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:14.077Z,1510152194.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:14.126Z,1510152194.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:14.481Z,1510152194.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:14.498Z,1510152194.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:14.875Z,1510152194.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:14.935Z,1510152194.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:15.260Z,1510152195.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:15.305Z,1510152195.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:15.686Z,1510152195.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:15.704Z,1510152195.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:16.079Z,1510152196.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:16.097Z,1510152196.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:16.741Z,1510152196.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:16.757Z,1510152196.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:16.893Z,1510152196.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:16.921Z,1510152196.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:17.303Z,1510152197.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:17.336Z,1510152197.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:17.709Z,1510152197.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:17.738Z,1510152197.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:18.103Z,1510152198.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:18.135Z,1510152198.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:18.497Z,1510152198.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:18.515Z,1510152198.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:18.896Z,1510152198.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:18.913Z,1510152198.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:19.298Z,1510152199.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:19.319Z,1510152199.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:19.726Z,1510152199.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:19.751Z,1510152199.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:20.096Z,1510152200.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:20.114Z,1510152200.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:20.503Z,1510152200.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:20.520Z,1510152200.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:21.184Z,1510152201.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:21.208Z,1510152201.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:21.313Z,1510152201.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:21.342Z,1510152201.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:21.741Z,1510152201.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:21.757Z,1510152201.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:22.140Z,1510152202.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:22.156Z,1510152202.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:22.534Z,1510152202.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:22.558Z,1510152202.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:22.919Z,1510152202.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:22.968Z,1510152202.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:23.324Z,1510152203.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:23.349Z,1510152203.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:23.752Z,1510152203.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:23.768Z,1510152203.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:24.140Z,1510152204.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:24.157Z,1510152204.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:24.799Z,1510152204.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:24.814Z,1510152204.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:24.917Z,1510152204.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:24.946Z,1510152204.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:25.340Z,1510152205.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:25.357Z,1510152205.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:25.740Z,1510152205.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:25.756Z,1510152205.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:26.130Z,1510152206.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:26.158Z,1510152206.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:26.523Z,1510152206.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:26.556Z,1510152206.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:26.919Z,1510152206.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:26.935Z,1510152206.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:27.320Z,1510152207.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:27.337Z,1510152207.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:27.752Z,1510152207.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:27.768Z,1510152207.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:28.120Z,1510152208.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:28.136Z,1510152208.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:28.538Z,1510152208.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:28.565Z,1510152208.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:29.214Z,1510152209.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:29.236Z,1510152209.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:29.375Z,1510152209.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:29.391Z,1510152209.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:29.786Z,1510152209.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:29.811Z,1510152209.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:30.186Z,1510152210.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:30.210Z,1510152210.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:30.582Z,1510152210.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:30.613Z,1510152210.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:30.971Z,1510152210.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:30.991Z,1510152210.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:31.372Z,1510152211.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:31.388Z,1510152211.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:31.793Z,1510152211.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:31.818Z,1510152211.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:32.181Z,1510152212.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:32.217Z,1510152212.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:32.859Z,1510152212.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:32.880Z,1510152212.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:32.988Z,1510152212.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:33.027Z,1510152213.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:33.417Z,1510152213.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:33.433Z,1510152213.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:33.816Z,1510152213.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:33.832Z,1510152213.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:34.215Z,1510152214.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:34.235Z,1510152214.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:34.596Z,1510152214.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:34.622Z,1510152214.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:34.995Z,1510152214.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:35.076Z,1510152215.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:35.396Z,1510152215.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:35.422Z,1510152215.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:35.822Z,1510152215.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:35.866Z,1510152215.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:36.195Z,1510152216.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:36.227Z,1510152216.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:36.612Z,1510152216.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:36.671Z,1510152216.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:37.279Z,1510152217.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:37.295Z,1510152217.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:37.426Z,1510152217.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:37.475Z,1510152217.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:37.842Z,1510152217.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:37.868Z,1510152217.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:38.246Z,1510152218.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:38.271Z,1510152218.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:38.642Z,1510152218.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:38.675Z,1510152218.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:39.027Z,1510152219.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:39.044Z,1510152219.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:39.428Z,1510152219.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:39.444Z,1510152219.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:39.858Z,1510152219.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:39.879Z,1510152219.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:40.244Z,1510152220.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:40.273Z,1510152220.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:40.917Z,1510152220.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:40.933Z,1510152220.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:41.033Z,1510152221.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:41.075Z,1510152221.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:41.456Z,1510152221.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:41.473Z,1510152221.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:41.856Z,1510152221.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:41.879Z,1510152221.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:42.246Z,1510152222.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:42.276Z,1510152222.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:42.639Z,1510152222.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:42.676Z,1510152222.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:43.035Z,1510152223.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:43.051Z,1510152223.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:43.440Z,1510152223.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:43.477Z,1510152223.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:43.867Z,1510152223.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:43.883Z,1510152223.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:44.239Z,1510152224.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:44.255Z,1510152224.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:44.649Z,1510152224.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:44.719Z,1510152224.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:45.326Z,1510152225.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:45.348Z,1510152225.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:45.491Z,1510152225.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:45.522Z,1510152225.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:45.894Z,1510152225.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:45.925Z,1510152225.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:46.301Z,1510152226.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:46.331Z,1510152226.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:46.701Z,1510152226.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:46.726Z,1510152226.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:47.082Z,1510152227.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:47.098Z,1510152227.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:47.484Z,1510152227.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:47.500Z,1510152227.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:47.919Z,1510152227.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:47.936Z,1510152227.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:48.297Z,1510152228.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:48.320Z,1510152228.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:49.712Z,1510152229.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:49.728Z,1510152229.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:49.840Z,1510152229.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:49.883Z,1510152229.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:50.250Z,1510152230.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:50.275Z,1510152230.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:50.649Z,1510152230.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:50.676Z,1510152230.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:51.054Z,1510152231.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:51.083Z,1510152231.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:51.440Z,1510152231.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:51.456Z,1510152231.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:51.839Z,1510152231.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:51.855Z,1510152231.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:52.245Z,1510152232.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:52.277Z,1510152232.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:52.670Z,1510152232.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:52.686Z,1510152232.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:53.057Z,1510152233.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:53.088Z,1510152233.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:53.725Z,1510152233.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:53.741Z,1510152233.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:53.855Z,1510152233.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:53.899Z,1510152233.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:54.276Z,1510152234.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:54.292Z,1510152234.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:54.680Z,1510152234.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:54.696Z,1510152234.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:55.076Z,1510152235.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:55.092Z,1510152235.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:55.455Z,1510152235.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:55.483Z,1510152235.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:55.856Z,1510152235.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:55.872Z,1510152235.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:56.260Z,1510152236.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:56.293Z,1510152236.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:56.688Z,1510152236.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:56.753Z,1510152236.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:57.059Z,1510152237.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:57.076Z,1510152237.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:57.477Z,1510152237.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:57.532Z,1510152237.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:58.296Z,1510152238.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:58.312Z,1510152238.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:58.413Z,1510152238.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:58.475Z,1510152238.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:58.830Z,1510152238.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:58.862Z,1510152238.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:59.229Z,1510152239.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:59.259Z,1510152239.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:43:59.641Z,1510152239.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:43:59.657Z,1510152239.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:00.015Z,1510152240.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:00.056Z,1510152240.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:00.416Z,1510152240.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:00.431Z,1510152240.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:00.849Z,1510152240.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:00.866Z,1510152240.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:00.949Z,1510152240.949 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:44:00.950Z,1510152240.950 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T14:44:01.240Z,1510152241.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:01.256Z,1510152241.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:01.337Z,1510152241.337 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:44:01.337Z,1510152241.337 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:44:01.337Z,1510152241.337 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:44:01.337Z,1510152241.337 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T14:44:01.338Z,1510152241.338 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:44:01.340Z,1510152241.340 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:44:01.741Z,1510152241.741 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:44:01.890Z,1510152241.890 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:44:01.999Z,1510152241.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:02.018Z,1510152242.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:02.121Z,1510152242.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:02.155Z,1510152242.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:02.544Z,1510152242.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:02.561Z,1510152242.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:02.944Z,1510152242.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:02.968Z,1510152242.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:03.348Z,1510152243.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:03.365Z,1510152243.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:03.441Z,1510152243.441 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:44:03.441Z,1510152243.441 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T14:44:03.505Z,1510152243.505 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:44:03.505Z,1510152243.505 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:44:03.505Z,1510152243.505 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:44:03.505Z,1510152243.505 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T14:44:03.505Z,1510152243.505 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:44:03.727Z,1510152243.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:03.763Z,1510152243.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:03.845Z,1510152243.845 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:44:03.909Z,1510152243.909 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:44:03.993Z,1510152243.993 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:44:04.128Z,1510152244.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:04.165Z,1510152244.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:04.528Z,1510152244.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:04.565Z,1510152244.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:04.959Z,1510152244.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:04.977Z,1510152244.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:05.349Z,1510152245.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:05.365Z,1510152245.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:05.449Z,1510152245.449 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:44:05.449Z,1510152245.449 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T14:44:05.609Z,1510152245.609 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:44:05.609Z,1510152245.609 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:44:05.609Z,1510152245.609 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:44:05.609Z,1510152245.609 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T14:44:05.609Z,1510152245.609 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:44:06.003Z,1510152246.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:06.013Z,1510152246.013 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:44:06.077Z,1510152246.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:06.185Z,1510152246.185 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:44:06.204Z,1510152246.204 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:44:06.226Z,1510152246.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:06.255Z,1510152246.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:06.630Z,1510152246.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:06.684Z,1510152246.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:07.027Z,1510152247.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:07.043Z,1510152247.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:07.435Z,1510152247.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:07.469Z,1510152247.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:07.553Z,1510152247.553 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:44:07.553Z,1510152247.553 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T14:44:07.818Z,1510152247.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:07.821Z,1510152247.821 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:44:07.821Z,1510152247.821 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:44:07.821Z,1510152247.821 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:44:07.821Z,1510152247.821 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T14:44:07.822Z,1510152247.822 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:44:07.841Z,1510152247.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:07.949Z,1510152247.949 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:44:08.225Z,1510152248.225 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:44:08.243Z,1510152248.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:08.311Z,1510152248.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:08.408Z,1510152248.408 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:44:08.616Z,1510152248.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:08.657Z,1510152248.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:09.040Z,1510152249.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:09.057Z,1510152249.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:09.425Z,1510152249.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:09.465Z,1510152249.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:10.103Z,1510152250.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:10.119Z,1510152250.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:10.197Z,1510152250.197 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:44:10.197Z,1510152250.197 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T14:44:10.221Z,1510152250.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:10.269Z,1510152250.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:10.429Z,1510152250.429 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:44:10.429Z,1510152250.429 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:44:10.429Z,1510152250.429 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:44:10.429Z,1510152250.429 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T14:44:10.429Z,1510152250.429 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:44:10.648Z,1510152250.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:10.665Z,1510152250.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:10.741Z,1510152250.741 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:44:10.741Z,1510152250.741 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:44:10.833Z,1510152250.833 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:44:10.919Z,1510152250.919 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:44:11.047Z,1510152251.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:11.067Z,1510152251.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:11.440Z,1510152251.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:11.457Z,1510152251.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:11.828Z,1510152251.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:11.861Z,1510152251.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:12.228Z,1510152252.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:12.258Z,1510152252.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:12.655Z,1510152252.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:12.672Z,1510152252.672 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:12.672Z,1510152252.672 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2017-11-08T14:44:12.672Z,1510152252.672 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T14:44:12.674Z,1510152252.674 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:12.675Z,1510152252.675 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27
2017-11-08T14:44:12.675Z,1510152252.675 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T14:44:12.677Z,1510152252.677 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:12.677Z,1510152252.677 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 27
2017-11-08T14:44:12.677Z,1510152252.677 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T14:44:12.773Z,1510152252.773 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T14:44:12.773Z,1510152252.773 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T14:44:12.774Z,1510152252.774 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T14:44:13.028Z,1510152253.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:13.149Z,1510152253.149 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T14:44:13.149Z,1510152253.149 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2017-11-08T14:44:13.150Z,1510152253.150 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T14:44:13.150Z,1510152253.150 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27
2017-11-08T14:44:13.150Z,1510152253.150 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T14:44:13.150Z,1510152253.150 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 27
2017-11-08T14:44:13.423Z,1510152253.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:13.443Z,1510152253.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T14:44:13.443Z,1510152253.443 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:44:13.443Z,1510152253.443 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:44:13.444Z,1510152253.444 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T14:44:13.444Z,1510152253.444 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:44:13.461Z,1510152253.461 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:44:13.461Z,1510152253.461 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T14:44:13.462Z,1510152253.462 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:44:13.462Z,1510152253.462 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:44:13.841Z,1510152253.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:13.878Z,1510152253.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T14:44:13.879Z,1510152253.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:14.546Z,1510152254.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:14.574Z,1510152254.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2017-11-08T14:44:14.575Z,1510152254.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:14.684Z,1510152254.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:14.726Z,1510152254.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2017-11-08T14:44:14.727Z,1510152254.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:15.098Z,1510152255.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:15.131Z,1510152255.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2017-11-08T14:44:15.132Z,1510152255.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:15.501Z,1510152255.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:15.535Z,1510152255.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2017-11-08T14:44:15.536Z,1510152255.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:15.898Z,1510152255.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:15.931Z,1510152255.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2017-11-08T14:44:15.932Z,1510152255.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:16.287Z,1510152256.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:16.307Z,1510152256.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T14:44:16.325Z,1510152256.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:16.687Z,1510152256.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:16.707Z,1510152256.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T14:44:16.708Z,1510152256.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:17.087Z,1510152257.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:17.107Z,1510152257.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T14:44:17.109Z,1510152257.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:17.487Z,1510152257.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:17.503Z,1510152257.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T14:44:17.504Z,1510152257.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:17.909Z,1510152257.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:17.933Z,1510152257.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-08T14:44:17.934Z,1510152257.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:18.297Z,1510152258.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:18.329Z,1510152258.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-08T14:44:18.330Z,1510152258.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:18.976Z,1510152258.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:19.077Z,1510152259.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T14:44:19.078Z,1510152259.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:19.193Z,1510152259.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:19.233Z,1510152259.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-08T14:44:19.234Z,1510152259.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:19.610Z,1510152259.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:19.626Z,1510152259.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2017-11-08T14:44:19.627Z,1510152259.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:20.004Z,1510152260.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:20.059Z,1510152260.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2017-11-08T14:44:20.060Z,1510152260.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:20.407Z,1510152260.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:20.423Z,1510152260.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2017-11-08T14:44:20.424Z,1510152260.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:20.788Z,1510152260.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:20.845Z,1510152260.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2017-11-08T14:44:20.846Z,1510152260.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:21.187Z,1510152261.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:21.213Z,1510152261.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T14:44:21.214Z,1510152261.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:21.584Z,1510152261.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:21.619Z,1510152261.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T14:44:21.620Z,1510152261.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:22.014Z,1510152262.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:22.034Z,1510152262.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2017-11-08T14:44:22.035Z,1510152262.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:22.383Z,1510152262.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:22.408Z,1510152262.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T14:44:22.409Z,1510152262.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:22.797Z,1510152262.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:22.826Z,1510152262.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2017-11-08T14:44:22.827Z,1510152262.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:23.477Z,1510152263.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:23.493Z,1510152263.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T14:44:23.494Z,1510152263.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:23.628Z,1510152263.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:23.668Z,1510152263.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2017-11-08T14:44:23.670Z,1510152263.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:24.038Z,1510152264.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:24.073Z,1510152264.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2017-11-08T14:44:24.074Z,1510152264.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:24.434Z,1510152264.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:24.450Z,1510152264.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2017-11-08T14:44:24.451Z,1510152264.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:24.834Z,1510152264.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:24.855Z,1510152264.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2017-11-08T14:44:24.856Z,1510152264.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:25.230Z,1510152265.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:25.246Z,1510152265.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2017-11-08T14:44:25.247Z,1510152265.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:25.625Z,1510152265.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:25.645Z,1510152265.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2017-11-08T14:44:25.646Z,1510152265.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:26.042Z,1510152266.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:26.058Z,1510152266.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2017-11-08T14:44:26.059Z,1510152266.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:26.437Z,1510152266.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:26.459Z,1510152266.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2017-11-08T14:44:26.460Z,1510152266.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:27.109Z,1510152267.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:27.132Z,1510152267.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T14:44:27.133Z,1510152267.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:27.246Z,1510152267.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:27.290Z,1510152267.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2017-11-08T14:44:27.292Z,1510152267.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:27.667Z,1510152267.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:27.703Z,1510152267.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2017-11-08T14:44:27.704Z,1510152267.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:28.063Z,1510152268.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:28.098Z,1510152268.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2017-11-08T14:44:28.099Z,1510152268.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:28.458Z,1510152268.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:28.489Z,1510152268.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-08T14:44:28.490Z,1510152268.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:28.851Z,1510152268.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:28.915Z,1510152268.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-08T14:44:28.916Z,1510152268.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:29.252Z,1510152269.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:29.299Z,1510152269.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-08T14:44:29.300Z,1510152269.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:29.688Z,1510152269.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:29.704Z,1510152269.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-11-08T14:44:29.705Z,1510152269.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:30.052Z,1510152270.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:30.098Z,1510152270.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-08T14:44:30.099Z,1510152270.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:30.451Z,1510152270.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:30.488Z,1510152270.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-08T14:44:30.489Z,1510152270.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:30.865Z,1510152270.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:30.897Z,1510152270.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-08T14:44:30.898Z,1510152270.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:31.562Z,1510152271.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:31.590Z,1510152271.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T14:44:31.591Z,1510152271.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:31.703Z,1510152271.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:31.739Z,1510152271.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2017-11-08T14:44:31.740Z,1510152271.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:32.132Z,1510152272.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:32.148Z,1510152272.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2017-11-08T14:44:32.149Z,1510152272.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:32.522Z,1510152272.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:32.547Z,1510152272.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2017-11-08T14:44:32.548Z,1510152272.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:32.919Z,1510152272.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:32.945Z,1510152272.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:33.307Z,1510152273.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:33.324Z,1510152273.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:33.709Z,1510152273.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:33.725Z,1510152273.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:34.111Z,1510152274.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:34.145Z,1510152274.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:34.511Z,1510152274.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:34.532Z,1510152274.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:34.934Z,1510152274.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:34.958Z,1510152274.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:35.325Z,1510152275.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:35.358Z,1510152275.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:36.006Z,1510152276.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:36.022Z,1510152276.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:36.151Z,1510152276.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:36.168Z,1510152276.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:36.558Z,1510152276.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:36.576Z,1510152276.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:36.959Z,1510152276.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:36.976Z,1510152276.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:37.359Z,1510152277.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:37.376Z,1510152277.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:37.745Z,1510152277.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:37.763Z,1510152277.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:38.145Z,1510152278.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:38.161Z,1510152278.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:38.546Z,1510152278.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:38.566Z,1510152278.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:38.970Z,1510152278.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:39.008Z,1510152279.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:39.339Z,1510152279.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:39.364Z,1510152279.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:39.756Z,1510152279.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:39.773Z,1510152279.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:40.426Z,1510152280.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:40.478Z,1510152280.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:40.620Z,1510152280.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:40.636Z,1510152280.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:41.034Z,1510152281.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:41.083Z,1510152281.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:41.433Z,1510152281.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:41.466Z,1510152281.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:41.826Z,1510152281.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:41.842Z,1510152281.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:42.229Z,1510152282.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:42.280Z,1510152282.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:42.642Z,1510152282.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:42.671Z,1510152282.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:43.026Z,1510152283.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:43.075Z,1510152283.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:43.706Z,1510152283.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:43.722Z,1510152283.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:43.842Z,1510152283.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:43.883Z,1510152283.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:44.267Z,1510152284.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:44.288Z,1510152284.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:44.667Z,1510152284.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:44.683Z,1510152284.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:45.063Z,1510152285.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:45.084Z,1510152285.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:45.451Z,1510152285.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:45.476Z,1510152285.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:45.848Z,1510152285.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:45.873Z,1510152285.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:46.257Z,1510152286.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:46.274Z,1510152286.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:46.671Z,1510152286.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:46.688Z,1510152286.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:47.069Z,1510152287.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:47.084Z,1510152287.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:47.734Z,1510152287.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:47.766Z,1510152287.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:47.884Z,1510152287.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:47.931Z,1510152287.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:48.298Z,1510152288.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:48.330Z,1510152288.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:48.694Z,1510152288.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:48.721Z,1510152288.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:49.098Z,1510152289.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:49.127Z,1510152289.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:49.488Z,1510152289.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:49.525Z,1510152289.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:49.883Z,1510152289.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:49.923Z,1510152289.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:50.288Z,1510152290.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:50.325Z,1510152290.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:50.717Z,1510152290.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:50.733Z,1510152290.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:51.102Z,1510152291.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:51.166Z,1510152291.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:51.779Z,1510152291.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:51.799Z,1510152291.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:51.931Z,1510152291.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:51.975Z,1510152291.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:52.346Z,1510152292.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:52.368Z,1510152292.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:52.745Z,1510152292.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:52.771Z,1510152292.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:53.141Z,1510152293.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:53.173Z,1510152293.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:53.531Z,1510152293.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:53.548Z,1510152293.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:53.926Z,1510152293.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:53.943Z,1510152293.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:54.331Z,1510152294.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:54.348Z,1510152294.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:54.759Z,1510152294.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:54.779Z,1510152294.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:55.130Z,1510152295.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:55.147Z,1510152295.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:55.542Z,1510152295.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:55.574Z,1510152295.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:56.220Z,1510152296.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:56.236Z,1510152296.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:56.342Z,1510152296.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:56.369Z,1510152296.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:56.762Z,1510152296.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:56.778Z,1510152296.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:57.163Z,1510152297.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:57.179Z,1510152297.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:57.545Z,1510152297.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:57.578Z,1510152297.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:57.940Z,1510152297.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:57.972Z,1510152297.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:58.340Z,1510152298.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:58.380Z,1510152298.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:58.767Z,1510152298.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:58.785Z,1510152298.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:59.153Z,1510152299.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:59.188Z,1510152299.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:44:59.901Z,1510152299.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:44:59.927Z,1510152299.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:00.044Z,1510152300.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:00.088Z,1510152300.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:00.467Z,1510152300.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:00.486Z,1510152300.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:00.853Z,1510152300.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:00.884Z,1510152300.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:01.264Z,1510152301.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:01.293Z,1510152301.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:01.643Z,1510152301.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:01.668Z,1510152301.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:02.039Z,1510152302.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:02.059Z,1510152302.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:02.444Z,1510152302.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:02.461Z,1510152302.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:02.876Z,1510152302.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:02.953Z,1510152302.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:03.243Z,1510152303.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:03.321Z,1510152303.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:03.654Z,1510152303.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:03.690Z,1510152303.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:04.336Z,1510152304.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:04.353Z,1510152304.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:04.464Z,1510152304.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:04.520Z,1510152304.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:04.886Z,1510152304.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:04.907Z,1510152304.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:05.271Z,1510152305.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:05.339Z,1510152305.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:05.669Z,1510152305.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:05.701Z,1510152305.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:06.060Z,1510152306.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:06.103Z,1510152306.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:06.456Z,1510152306.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:06.474Z,1510152306.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:06.890Z,1510152306.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:06.906Z,1510152306.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:07.274Z,1510152307.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:07.319Z,1510152307.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:07.947Z,1510152307.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:07.953Z,1510152307.953 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-11-08T14:45:07.973Z,1510152307.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:08.111Z,1510152308.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:08.127Z,1510152308.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:08.543Z,1510152308.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:08.563Z,1510152308.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:08.940Z,1510152308.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:08.956Z,1510152308.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:09.329Z,1510152309.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:09.355Z,1510152309.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:09.723Z,1510152309.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:09.755Z,1510152309.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:10.119Z,1510152310.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:10.155Z,1510152310.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:10.520Z,1510152310.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:10.548Z,1510152310.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:10.956Z,1510152310.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:10.973Z,1510152310.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:11.320Z,1510152311.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:11.336Z,1510152311.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:11.733Z,1510152311.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:11.766Z,1510152311.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:12.408Z,1510152312.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:12.423Z,1510152312.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:12.530Z,1510152312.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:12.558Z,1510152312.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:12.957Z,1510152312.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:12.974Z,1510152312.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:13.345Z,1510152313.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:13.408Z,1510152313.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:13.746Z,1510152313.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:13.779Z,1510152313.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:14.136Z,1510152314.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:14.176Z,1510152314.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:14.537Z,1510152314.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:14.570Z,1510152314.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:14.964Z,1510152314.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:14.981Z,1510152314.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:15.350Z,1510152315.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:15.377Z,1510152315.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:16.023Z,1510152316.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:16.039Z,1510152316.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:16.137Z,1510152316.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:16.154Z,1510152316.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:16.554Z,1510152316.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:16.582Z,1510152316.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:16.953Z,1510152316.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:17.003Z,1510152317.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:17.354Z,1510152317.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:17.381Z,1510152317.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:17.743Z,1510152317.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:17.787Z,1510152317.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:18.139Z,1510152318.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:18.155Z,1510152318.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:18.540Z,1510152318.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:18.556Z,1510152318.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:18.971Z,1510152318.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:18.989Z,1510152318.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:19.343Z,1510152319.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:19.359Z,1510152319.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:19.753Z,1510152319.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:19.781Z,1510152319.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:20.430Z,1510152320.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:20.451Z,1510152320.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:20.596Z,1510152320.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:20.629Z,1510152320.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:21.002Z,1510152321.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:21.039Z,1510152321.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:21.406Z,1510152321.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:21.441Z,1510152321.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:21.801Z,1510152321.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:21.844Z,1510152321.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:22.191Z,1510152322.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:22.216Z,1510152322.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:22.592Z,1510152322.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:22.612Z,1510152322.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:23.013Z,1510152323.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:23.047Z,1510152323.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:23.402Z,1510152323.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:23.418Z,1510152323.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:24.070Z,1510152324.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:24.096Z,1510152324.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:24.211Z,1510152324.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:24.255Z,1510152324.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:24.636Z,1510152324.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:24.653Z,1510152324.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:25.036Z,1510152325.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:25.111Z,1510152325.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:25.425Z,1510152325.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:25.484Z,1510152325.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:25.816Z,1510152325.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:25.849Z,1510152325.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:26.219Z,1510152326.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:26.235Z,1510152326.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:26.641Z,1510152326.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:26.712Z,1510152326.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:27.019Z,1510152327.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:27.039Z,1510152327.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:27.418Z,1510152327.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:27.476Z,1510152327.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:27.829Z,1510152327.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:27.845Z,1510152327.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:28.553Z,1510152328.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:28.576Z,1510152328.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:28.687Z,1510152328.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:28.717Z,1510152328.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:29.094Z,1510152329.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:29.127Z,1510152329.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:29.494Z,1510152329.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:29.529Z,1510152329.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:29.898Z,1510152329.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:29.923Z,1510152329.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:30.286Z,1510152330.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:30.312Z,1510152330.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:30.685Z,1510152330.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:30.702Z,1510152330.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:31.084Z,1510152331.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:31.100Z,1510152331.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:31.487Z,1510152331.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:31.502Z,1510152331.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:31.906Z,1510152331.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:31.939Z,1510152331.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:32.297Z,1510152332.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:32.314Z,1510152332.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:32.978Z,1510152332.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:32.993Z,1510152332.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:33.113Z,1510152333.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:33.155Z,1510152333.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:33.539Z,1510152333.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:33.555Z,1510152333.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:33.936Z,1510152333.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:34.086Z,1510152334.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:34.336Z,1510152334.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:34.398Z,1510152334.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:34.719Z,1510152334.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:34.745Z,1510152334.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:35.119Z,1510152335.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:35.145Z,1510152335.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:35.517Z,1510152335.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:35.572Z,1510152335.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:35.946Z,1510152335.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:35.968Z,1510152335.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:36.319Z,1510152336.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:36.344Z,1510152336.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:36.739Z,1510152336.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:36.756Z,1510152336.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:37.406Z,1510152337.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:37.422Z,1510152337.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:37.551Z,1510152337.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:37.591Z,1510152337.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:37.961Z,1510152337.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:37.990Z,1510152337.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:38.361Z,1510152338.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:38.401Z,1510152338.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:38.757Z,1510152338.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:38.774Z,1510152338.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:39.160Z,1510152339.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:39.184Z,1510152339.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:39.544Z,1510152339.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:39.563Z,1510152339.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:39.969Z,1510152339.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:39.990Z,1510152339.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:40.362Z,1510152340.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:40.394Z,1510152340.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:41.254Z,1510152341.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:41.280Z,1510152341.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:41.396Z,1510152341.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:41.429Z,1510152341.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:41.814Z,1510152341.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:41.830Z,1510152341.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:42.213Z,1510152342.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:42.229Z,1510152342.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:42.614Z,1510152342.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:42.630Z,1510152342.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:43.006Z,1510152343.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:43.023Z,1510152343.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:43.406Z,1510152343.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:43.422Z,1510152343.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:43.826Z,1510152343.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:43.854Z,1510152343.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:44.243Z,1510152344.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:44.310Z,1510152344.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:44.613Z,1510152344.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:44.629Z,1510152344.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:45.286Z,1510152345.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:45.312Z,1510152345.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:45.424Z,1510152345.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:45.468Z,1510152345.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:45.838Z,1510152345.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:45.870Z,1510152345.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:46.238Z,1510152346.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:46.270Z,1510152346.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:46.634Z,1510152346.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:46.659Z,1510152346.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:47.023Z,1510152347.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:47.039Z,1510152347.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:47.425Z,1510152347.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:47.476Z,1510152347.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:47.854Z,1510152347.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:47.896Z,1510152347.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:48.237Z,1510152348.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:48.275Z,1510152348.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:48.911Z,1510152348.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:48.968Z,1510152348.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:49.087Z,1510152349.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:49.127Z,1510152349.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:49.494Z,1510152349.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:49.544Z,1510152349.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:49.897Z,1510152349.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:49.925Z,1510152349.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:50.294Z,1510152350.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:50.326Z,1510152350.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:50.679Z,1510152350.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:50.695Z,1510152350.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:51.083Z,1510152351.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:51.100Z,1510152351.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:51.483Z,1510152351.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:51.504Z,1510152351.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:51.910Z,1510152351.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:51.926Z,1510152351.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:52.283Z,1510152352.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:52.303Z,1510152352.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:52.693Z,1510152352.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:52.724Z,1510152352.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:53.354Z,1510152353.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:53.376Z,1510152353.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:53.491Z,1510152353.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:53.531Z,1510152353.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:53.912Z,1510152353.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:53.928Z,1510152353.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:54.301Z,1510152354.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:54.326Z,1510152354.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:54.713Z,1510152354.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:54.729Z,1510152354.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:55.091Z,1510152355.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:55.126Z,1510152355.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:55.491Z,1510152355.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:55.527Z,1510152355.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:55.924Z,1510152355.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:55.940Z,1510152355.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:56.313Z,1510152356.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:56.335Z,1510152356.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:57.002Z,1510152357.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:57.032Z,1510152357.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:57.147Z,1510152357.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:57.179Z,1510152357.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:57.567Z,1510152357.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:57.627Z,1510152357.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:57.964Z,1510152357.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:57.979Z,1510152357.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:58.368Z,1510152358.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:58.385Z,1510152358.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:58.743Z,1510152358.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:58.778Z,1510152358.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:59.147Z,1510152359.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:59.177Z,1510152359.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:59.548Z,1510152359.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:59.578Z,1510152359.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:45:59.979Z,1510152359.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:45:59.999Z,1510152359.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:00.347Z,1510152360.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:00.377Z,1510152360.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:00.768Z,1510152360.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:00.791Z,1510152360.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:01.437Z,1510152361.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:01.453Z,1510152361.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:01.584Z,1510152361.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:01.635Z,1510152361.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:02.013Z,1510152362.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:02.029Z,1510152362.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:02.401Z,1510152362.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:02.432Z,1510152362.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:02.797Z,1510152362.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:02.831Z,1510152362.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:03.191Z,1510152363.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:03.225Z,1510152363.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:03.592Z,1510152363.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:03.608Z,1510152363.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:04.020Z,1510152364.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:04.037Z,1510152364.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:04.405Z,1510152364.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:04.433Z,1510152364.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:05.081Z,1510152365.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:05.098Z,1510152365.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:05.205Z,1510152365.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:05.238Z,1510152365.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:05.632Z,1510152365.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:05.648Z,1510152365.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:06.026Z,1510152366.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:06.046Z,1510152366.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:06.423Z,1510152366.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:06.439Z,1510152366.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:06.812Z,1510152366.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:06.847Z,1510152366.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:07.208Z,1510152367.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:07.234Z,1510152367.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:07.608Z,1510152367.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:07.641Z,1510152367.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:08.039Z,1510152368.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:08.056Z,1510152368.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:08.411Z,1510152368.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:08.437Z,1510152368.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:08.827Z,1510152368.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:08.843Z,1510152368.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:09.537Z,1510152369.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:09.629Z,1510152369.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:09.741Z,1510152369.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:09.779Z,1510152369.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:10.162Z,1510152370.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:10.194Z,1510152370.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:10.556Z,1510152370.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:10.604Z,1510152370.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:10.958Z,1510152370.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:10.991Z,1510152370.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:11.346Z,1510152371.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:11.405Z,1510152371.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:11.746Z,1510152371.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:11.762Z,1510152371.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:12.145Z,1510152372.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:12.161Z,1510152372.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:12.547Z,1510152372.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:12.567Z,1510152372.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:12.970Z,1510152372.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:12.994Z,1510152372.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:13.357Z,1510152373.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:13.374Z,1510152373.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:14.032Z,1510152374.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:14.049Z,1510152374.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:14.163Z,1510152374.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:14.200Z,1510152374.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:14.574Z,1510152374.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:14.599Z,1510152374.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:14.977Z,1510152374.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:15.002Z,1510152375.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:15.378Z,1510152375.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:15.422Z,1510152375.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:15.763Z,1510152375.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:15.780Z,1510152375.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:16.163Z,1510152376.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:16.179Z,1510152376.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:16.564Z,1510152376.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:16.581Z,1510152376.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:16.993Z,1510152376.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:17.009Z,1510152377.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:17.361Z,1510152377.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:17.378Z,1510152377.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:17.774Z,1510152377.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:17.806Z,1510152377.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:18.447Z,1510152378.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:18.462Z,1510152378.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:18.575Z,1510152378.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:18.607Z,1510152378.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:18.982Z,1510152378.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:19.020Z,1510152379.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:19.382Z,1510152379.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:19.451Z,1510152379.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:19.782Z,1510152379.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:19.807Z,1510152379.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:20.172Z,1510152380.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:20.201Z,1510152380.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:20.573Z,1510152380.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:20.616Z,1510152380.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:20.993Z,1510152380.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:21.024Z,1510152381.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:21.388Z,1510152381.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:21.419Z,1510152381.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:22.061Z,1510152382.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:22.080Z,1510152382.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:22.185Z,1510152382.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:22.213Z,1510152382.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:22.617Z,1510152382.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:22.633Z,1510152382.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:23.016Z,1510152383.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:23.032Z,1510152383.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:23.409Z,1510152383.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:23.425Z,1510152383.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:23.796Z,1510152383.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:23.822Z,1510152383.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:24.188Z,1510152384.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:24.225Z,1510152384.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:24.588Z,1510152384.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:24.651Z,1510152384.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:25.025Z,1510152385.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:25.041Z,1510152385.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:25.388Z,1510152385.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:25.404Z,1510152385.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:25.801Z,1510152385.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:25.836Z,1510152385.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:26.521Z,1510152386.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:26.536Z,1510152386.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:26.641Z,1510152386.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:26.690Z,1510152386.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:27.058Z,1510152387.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:27.090Z,1510152387.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:27.468Z,1510152387.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:27.491Z,1510152387.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:27.858Z,1510152387.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:27.892Z,1510152387.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:28.248Z,1510152388.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:28.283Z,1510152388.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:28.680Z,1510152388.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:28.703Z,1510152388.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:29.060Z,1510152389.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:29.084Z,1510152389.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:29.738Z,1510152389.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:29.754Z,1510152389.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:29.887Z,1510152389.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:29.931Z,1510152389.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:30.298Z,1510152390.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:30.329Z,1510152390.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:30.693Z,1510152390.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:30.730Z,1510152390.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:31.094Z,1510152391.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:31.126Z,1510152391.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:31.483Z,1510152391.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:31.557Z,1510152391.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:31.880Z,1510152391.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:31.903Z,1510152391.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:32.283Z,1510152392.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:32.339Z,1510152392.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:32.705Z,1510152392.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:32.730Z,1510152392.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:33.082Z,1510152393.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:33.132Z,1510152393.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:33.493Z,1510152393.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:33.509Z,1510152393.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:34.174Z,1510152394.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:34.189Z,1510152394.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:34.301Z,1510152394.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:34.343Z,1510152394.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:34.729Z,1510152394.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:34.745Z,1510152394.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:35.123Z,1510152395.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:35.139Z,1510152395.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:35.520Z,1510152395.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:35.537Z,1510152395.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:35.907Z,1510152395.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:35.934Z,1510152395.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:36.308Z,1510152396.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:36.333Z,1510152396.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:36.735Z,1510152396.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:36.751Z,1510152396.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:37.133Z,1510152397.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:37.149Z,1510152397.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:37.832Z,1510152397.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:37.848Z,1510152397.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:37.949Z,1510152397.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:37.991Z,1510152397.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:38.376Z,1510152398.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:38.399Z,1510152398.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:38.776Z,1510152398.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:38.792Z,1510152398.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:39.171Z,1510152399.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:39.187Z,1510152399.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:39.555Z,1510152399.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:39.581Z,1510152399.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:39.955Z,1510152399.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:39.988Z,1510152399.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:40.356Z,1510152400.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:40.381Z,1510152400.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:40.783Z,1510152400.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:40.804Z,1510152400.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:41.175Z,1510152401.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:41.233Z,1510152401.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:41.834Z,1510152401.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:41.850Z,1510152401.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:41.987Z,1510152401.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:42.026Z,1510152402.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:42.390Z,1510152402.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:42.406Z,1510152402.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:42.789Z,1510152402.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:42.806Z,1510152402.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:43.194Z,1510152403.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:43.219Z,1510152403.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:43.582Z,1510152403.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:43.598Z,1510152403.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:43.981Z,1510152403.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:43.998Z,1510152403.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:44.381Z,1510152404.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:44.403Z,1510152404.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:44.802Z,1510152404.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:44.834Z,1510152404.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:45.191Z,1510152405.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:45.208Z,1510152405.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:45.866Z,1510152405.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:45.887Z,1510152405.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:45.999Z,1510152405.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:46.047Z,1510152406.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:46.425Z,1510152406.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:46.441Z,1510152406.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:46.825Z,1510152406.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:46.841Z,1510152406.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:47.214Z,1510152407.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:47.246Z,1510152407.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:47.604Z,1510152407.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:47.636Z,1510152407.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:48.005Z,1510152408.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:48.033Z,1510152408.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:48.403Z,1510152408.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:48.449Z,1510152408.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:48.830Z,1510152408.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:48.852Z,1510152408.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:49.204Z,1510152409.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:49.221Z,1510152409.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:49.607Z,1510152409.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:49.624Z,1510152409.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:50.007Z,1510152410.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:50.028Z,1510152410.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:50.406Z,1510152410.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:50.423Z,1510152410.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:50.806Z,1510152410.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:50.823Z,1510152410.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:51.207Z,1510152411.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:51.223Z,1510152411.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:51.606Z,1510152411.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:51.623Z,1510152411.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:52.006Z,1510152412.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:52.076Z,1510152412.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:52.408Z,1510152412.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:52.425Z,1510152412.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:52.810Z,1510152412.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:52.826Z,1510152412.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:53.210Z,1510152413.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:53.286Z,1510152413.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:53.618Z,1510152413.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:53.634Z,1510152413.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:55.161Z,1510152415.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:55.217Z,1510152415.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:55.335Z,1510152415.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:55.376Z,1510152415.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:55.742Z,1510152415.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:55.781Z,1510152415.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:56.140Z,1510152416.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:56.173Z,1510152416.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:56.542Z,1510152416.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:56.574Z,1510152416.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:56.931Z,1510152416.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:56.951Z,1510152416.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:57.331Z,1510152417.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:57.347Z,1510152417.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:57.754Z,1510152417.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:57.778Z,1510152417.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:58.146Z,1510152418.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:58.178Z,1510152418.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:58.802Z,1510152418.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:58.824Z,1510152418.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:58.943Z,1510152418.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:58.983Z,1510152418.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:59.354Z,1510152419.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:59.384Z,1510152419.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:46:59.757Z,1510152419.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:46:59.784Z,1510152419.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:00.168Z,1510152420.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:00.185Z,1510152420.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:00.548Z,1510152420.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:00.580Z,1510152420.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:00.944Z,1510152420.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:00.960Z,1510152420.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:01.345Z,1510152421.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:01.362Z,1510152421.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:01.774Z,1510152421.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:01.794Z,1510152421.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:02.142Z,1510152422.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:02.158Z,1510152422.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:02.557Z,1510152422.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:02.585Z,1510152422.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:03.232Z,1510152423.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:03.248Z,1510152423.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:03.349Z,1510152423.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:03.378Z,1510152423.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:03.774Z,1510152423.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:03.835Z,1510152423.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:04.178Z,1510152424.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:04.194Z,1510152424.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:04.579Z,1510152424.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:04.595Z,1510152424.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:04.956Z,1510152424.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:04.988Z,1510152424.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:05.356Z,1510152425.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:05.397Z,1510152425.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:05.790Z,1510152425.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:05.806Z,1510152425.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:06.155Z,1510152426.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:06.172Z,1510152426.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:06.570Z,1510152426.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:06.597Z,1510152426.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:07.237Z,1510152427.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:07.253Z,1510152427.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:07.357Z,1510152427.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:07.374Z,1510152427.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:07.774Z,1510152427.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:07.799Z,1510152427.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:08.177Z,1510152428.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:08.204Z,1510152428.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:08.578Z,1510152428.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:08.607Z,1510152428.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:08.963Z,1510152428.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:08.979Z,1510152428.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:09.364Z,1510152429.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:09.393Z,1510152429.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:09.795Z,1510152429.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:09.812Z,1510152429.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:10.181Z,1510152430.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:10.206Z,1510152430.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:10.848Z,1510152430.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:10.865Z,1510152430.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:10.972Z,1510152430.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:11.009Z,1510152431.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:11.382Z,1510152431.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:11.408Z,1510152431.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:11.786Z,1510152431.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:11.820Z,1510152431.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:12.186Z,1510152432.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:12.228Z,1510152432.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:12.572Z,1510152432.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:12.608Z,1510152432.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:12.972Z,1510152432.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:12.988Z,1510152432.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:13.375Z,1510152433.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:13.391Z,1510152433.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:13.804Z,1510152433.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:13.827Z,1510152433.827 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:13.827Z,1510152433.827 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2017-11-08T14:47:13.827Z,1510152433.827 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T14:47:13.829Z,1510152433.829 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:13.829Z,1510152433.829 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28
2017-11-08T14:47:13.830Z,1510152433.829 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T14:47:13.831Z,1510152433.831 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:13.831Z,1510152433.831 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 28
2017-11-08T14:47:13.831Z,1510152433.831 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T14:47:13.905Z,1510152433.905 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T14:47:13.905Z,1510152433.905 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T14:47:13.905Z,1510152433.905 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T14:47:14.172Z,1510152434.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:14.289Z,1510152434.289 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T14:47:14.289Z,1510152434.289 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2017-11-08T14:47:14.289Z,1510152434.289 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T14:47:14.289Z,1510152434.289 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28
2017-11-08T14:47:14.290Z,1510152434.290 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T14:47:14.290Z,1510152434.290 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 28
2017-11-08T14:47:14.586Z,1510152434.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:14.650Z,1510152434.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T14:47:14.650Z,1510152434.650 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:47:14.651Z,1510152434.651 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:47:14.651Z,1510152434.651 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T14:47:14.651Z,1510152434.651 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:47:14.652Z,1510152434.652 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:47:14.652Z,1510152434.652 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T14:47:14.657Z,1510152434.657 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:47:14.657Z,1510152434.657 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:47:15.254Z,1510152435.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:15.289Z,1510152435.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s.
2017-11-08T14:47:15.291Z,1510152435.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:15.407Z,1510152435.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:15.442Z,1510152435.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T14:47:15.443Z,1510152435.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:15.827Z,1510152435.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:15.861Z,1510152435.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T14:47:15.862Z,1510152435.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:16.217Z,1510152436.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:16.241Z,1510152436.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T14:47:16.242Z,1510152436.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:16.629Z,1510152436.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:16.645Z,1510152436.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T14:47:16.646Z,1510152436.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:17.007Z,1510152437.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:17.058Z,1510152437.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T14:47:17.059Z,1510152437.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:17.408Z,1510152437.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:17.442Z,1510152437.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T14:47:17.443Z,1510152437.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:17.836Z,1510152437.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:17.892Z,1510152437.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-08T14:47:17.893Z,1510152437.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:18.233Z,1510152438.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:18.253Z,1510152438.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T14:47:18.254Z,1510152438.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:18.890Z,1510152438.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:18.905Z,1510152438.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2017-11-08T14:47:18.906Z,1510152438.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:19.006Z,1510152439.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:19.050Z,1510152439.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T14:47:19.051Z,1510152439.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:19.432Z,1510152439.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:19.447Z,1510152439.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T14:47:19.449Z,1510152439.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:19.831Z,1510152439.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:19.851Z,1510152439.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T14:47:19.852Z,1510152439.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:20.230Z,1510152440.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:20.246Z,1510152440.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T14:47:20.247Z,1510152440.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:20.612Z,1510152440.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:20.647Z,1510152440.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T14:47:20.648Z,1510152440.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:21.011Z,1510152441.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:21.047Z,1510152441.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T14:47:21.048Z,1510152441.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:21.413Z,1510152441.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:21.449Z,1510152441.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T14:47:21.450Z,1510152441.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:21.844Z,1510152441.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:21.867Z,1510152441.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T14:47:21.868Z,1510152441.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:22.226Z,1510152442.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:22.251Z,1510152442.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T14:47:22.252Z,1510152442.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:22.889Z,1510152442.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:22.905Z,1510152442.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2017-11-08T14:47:22.906Z,1510152442.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:23.009Z,1510152443.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:23.060Z,1510152443.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T14:47:23.061Z,1510152443.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:23.426Z,1510152443.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:23.458Z,1510152443.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T14:47:23.459Z,1510152443.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:23.825Z,1510152443.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:23.853Z,1510152443.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T14:47:23.854Z,1510152443.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:24.236Z,1510152444.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:24.259Z,1510152444.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T14:47:24.260Z,1510152444.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:24.615Z,1510152444.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:24.656Z,1510152444.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T14:47:24.657Z,1510152444.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:25.011Z,1510152445.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:25.027Z,1510152445.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T14:47:25.028Z,1510152445.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:25.411Z,1510152445.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:25.431Z,1510152445.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T14:47:25.432Z,1510152445.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:25.846Z,1510152445.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:25.862Z,1510152445.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T14:47:25.863Z,1510152445.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:26.225Z,1510152446.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:26.274Z,1510152446.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T14:47:26.275Z,1510152446.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:26.902Z,1510152446.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:26.923Z,1510152446.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2017-11-08T14:47:26.924Z,1510152446.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:27.035Z,1510152447.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:27.083Z,1510152447.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T14:47:27.084Z,1510152447.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:27.457Z,1510152447.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:27.472Z,1510152447.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T14:47:27.474Z,1510152447.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:27.856Z,1510152447.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:27.871Z,1510152447.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T14:47:27.873Z,1510152447.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:28.251Z,1510152448.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:28.267Z,1510152448.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T14:47:28.268Z,1510152448.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:28.635Z,1510152448.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:28.662Z,1510152448.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T14:47:28.663Z,1510152448.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:29.046Z,1510152449.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:29.062Z,1510152449.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T14:47:29.062Z,1510152449.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:29.436Z,1510152449.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:29.470Z,1510152449.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T14:47:29.471Z,1510152449.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:29.861Z,1510152449.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:29.883Z,1510152449.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T14:47:29.884Z,1510152449.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:30.256Z,1510152450.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:30.272Z,1510152450.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T14:47:30.273Z,1510152450.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:30.916Z,1510152450.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:30.932Z,1510152450.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2017-11-08T14:47:30.933Z,1510152450.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:31.040Z,1510152451.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:31.079Z,1510152451.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T14:47:31.080Z,1510152451.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:31.450Z,1510152451.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:31.482Z,1510152451.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T14:47:31.482Z,1510152451.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:31.858Z,1510152451.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:31.879Z,1510152451.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T14:47:31.880Z,1510152451.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:32.261Z,1510152452.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:32.283Z,1510152452.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T14:47:32.284Z,1510152452.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:32.635Z,1510152452.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:32.652Z,1510152452.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T14:47:32.669Z,1510152452.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:33.039Z,1510152453.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:33.056Z,1510152453.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T14:47:33.069Z,1510152453.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:33.440Z,1510152453.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:33.459Z,1510152453.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T14:47:33.480Z,1510152453.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:33.872Z,1510152453.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:33.889Z,1510152453.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:34.254Z,1510152454.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:34.282Z,1510152454.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:34.931Z,1510152454.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:34.947Z,1510152454.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:35.049Z,1510152455.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:35.091Z,1510152455.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:35.470Z,1510152455.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:35.493Z,1510152455.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:35.876Z,1510152455.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:35.893Z,1510152455.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:36.276Z,1510152456.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:36.293Z,1510152456.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:36.651Z,1510152456.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:36.685Z,1510152456.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:37.055Z,1510152457.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:37.104Z,1510152457.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:37.456Z,1510152457.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:37.492Z,1510152457.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:37.887Z,1510152457.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:37.908Z,1510152457.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:38.276Z,1510152458.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:38.293Z,1510152458.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:38.946Z,1510152458.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:38.989Z,1510152458.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:39.103Z,1510152459.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:39.143Z,1510152459.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:39.526Z,1510152459.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:39.564Z,1510152459.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:39.925Z,1510152459.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:39.941Z,1510152459.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:40.314Z,1510152460.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:40.380Z,1510152460.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:40.699Z,1510152460.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:40.715Z,1510152460.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:41.103Z,1510152461.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:41.143Z,1510152461.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:41.504Z,1510152461.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:41.548Z,1510152461.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:41.940Z,1510152461.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:41.956Z,1510152461.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:42.313Z,1510152462.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:42.346Z,1510152462.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:43.039Z,1510152463.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:43.059Z,1510152463.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:43.169Z,1510152463.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:43.207Z,1510152463.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:43.596Z,1510152463.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:43.612Z,1510152463.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:43.995Z,1510152463.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:44.011Z,1510152464.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:44.392Z,1510152464.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:44.409Z,1510152464.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:44.776Z,1510152464.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:44.810Z,1510152464.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:45.175Z,1510152465.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:45.200Z,1510152465.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:45.572Z,1510152465.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:45.605Z,1510152465.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:46.004Z,1510152466.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:46.027Z,1510152466.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:46.396Z,1510152466.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:46.419Z,1510152466.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:47.054Z,1510152467.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:47.070Z,1510152467.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:47.175Z,1510152467.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:47.212Z,1510152467.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:47.592Z,1510152467.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:47.609Z,1510152467.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:47.996Z,1510152467.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:48.013Z,1510152468.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:48.392Z,1510152468.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:48.449Z,1510152468.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:48.775Z,1510152468.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:48.810Z,1510152468.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:49.175Z,1510152469.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:49.208Z,1510152469.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:49.576Z,1510152469.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:49.608Z,1510152469.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:50.006Z,1510152470.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:50.022Z,1510152470.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:50.396Z,1510152470.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:50.413Z,1510152470.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:51.070Z,1510152471.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:51.102Z,1510152471.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:51.219Z,1510152471.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:51.271Z,1510152471.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:51.633Z,1510152471.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:51.671Z,1510152471.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:52.034Z,1510152472.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:52.063Z,1510152472.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:52.425Z,1510152472.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:52.458Z,1510152472.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:52.819Z,1510152472.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:52.835Z,1510152472.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:53.217Z,1510152473.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:53.233Z,1510152473.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:53.650Z,1510152473.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:53.667Z,1510152473.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:54.020Z,1510152474.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:54.049Z,1510152474.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:54.422Z,1510152474.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:54.439Z,1510152474.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:54.833Z,1510152474.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:54.867Z,1510152474.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:55.509Z,1510152475.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:55.525Z,1510152475.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:55.643Z,1510152475.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:55.694Z,1510152475.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:56.064Z,1510152476.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:56.084Z,1510152476.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:56.471Z,1510152476.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:56.487Z,1510152476.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:56.864Z,1510152476.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:56.912Z,1510152476.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:57.244Z,1510152477.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:57.279Z,1510152477.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:57.672Z,1510152477.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:57.691Z,1510152477.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:58.066Z,1510152478.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:58.084Z,1510152478.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:58.734Z,1510152478.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:58.766Z,1510152478.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:58.885Z,1510152478.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:58.923Z,1510152478.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:59.298Z,1510152479.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:59.347Z,1510152479.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:47:59.701Z,1510152479.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:47:59.724Z,1510152479.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:00.100Z,1510152480.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:00.125Z,1510152480.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:00.489Z,1510152480.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:00.549Z,1510152480.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:00.886Z,1510152480.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:00.917Z,1510152480.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:01.292Z,1510152481.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:01.339Z,1510152481.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:01.711Z,1510152481.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:01.745Z,1510152481.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:02.088Z,1510152482.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:02.132Z,1510152482.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:02.497Z,1510152482.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:02.533Z,1510152482.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:03.179Z,1510152483.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:03.199Z,1510152483.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:03.325Z,1510152483.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:03.341Z,1510152483.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:03.772Z,1510152483.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:03.833Z,1510152483.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:04.126Z,1510152484.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:04.146Z,1510152484.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:04.527Z,1510152484.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:04.544Z,1510152484.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:04.923Z,1510152484.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:04.943Z,1510152484.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:05.312Z,1510152485.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:05.337Z,1510152485.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:05.734Z,1510152485.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:05.755Z,1510152485.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:06.133Z,1510152486.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:06.155Z,1510152486.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:06.891Z,1510152486.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:06.911Z,1510152486.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:07.042Z,1510152487.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:07.091Z,1510152487.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:07.458Z,1510152487.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:07.491Z,1510152487.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:07.857Z,1510152487.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:07.886Z,1510152487.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:08.262Z,1510152488.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:08.288Z,1510152488.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:08.648Z,1510152488.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:08.686Z,1510152488.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:09.047Z,1510152489.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:09.063Z,1510152489.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:09.443Z,1510152489.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:09.464Z,1510152489.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:09.874Z,1510152489.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:09.896Z,1510152489.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:10.258Z,1510152490.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:10.301Z,1510152490.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:10.928Z,1510152490.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:10.944Z,1510152490.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:11.055Z,1510152491.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:11.096Z,1510152491.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:11.466Z,1510152491.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:11.500Z,1510152491.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:11.864Z,1510152491.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:11.891Z,1510152491.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:12.277Z,1510152492.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:12.293Z,1510152492.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:12.651Z,1510152492.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:12.667Z,1510152492.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:13.051Z,1510152493.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:13.068Z,1510152493.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:13.456Z,1510152493.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:13.494Z,1510152493.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:13.883Z,1510152493.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:13.899Z,1510152493.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:14.265Z,1510152494.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:14.298Z,1510152494.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:14.945Z,1510152494.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:14.961Z,1510152494.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:15.061Z,1510152495.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:15.107Z,1510152495.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:15.488Z,1510152495.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:15.506Z,1510152495.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:15.881Z,1510152495.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:15.907Z,1510152495.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:16.273Z,1510152496.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:16.306Z,1510152496.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:16.668Z,1510152496.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:16.703Z,1510152496.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:17.063Z,1510152497.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:17.097Z,1510152497.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:17.464Z,1510152497.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:17.501Z,1510152497.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:17.900Z,1510152497.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:17.916Z,1510152497.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:18.264Z,1510152498.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:18.280Z,1510152498.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:18.679Z,1510152498.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:18.707Z,1510152498.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:19.358Z,1510152499.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:19.376Z,1510152499.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:19.519Z,1510152499.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:19.560Z,1510152499.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:19.930Z,1510152499.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:19.960Z,1510152499.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:20.341Z,1510152500.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:20.363Z,1510152500.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:20.730Z,1510152500.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:20.760Z,1510152500.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:21.119Z,1510152501.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:21.153Z,1510152501.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:21.516Z,1510152501.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:21.563Z,1510152501.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:21.950Z,1510152501.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:21.967Z,1510152501.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:22.333Z,1510152502.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:22.383Z,1510152502.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:23.004Z,1510152503.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:23.020Z,1510152503.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:23.139Z,1510152503.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:23.188Z,1510152503.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:23.555Z,1510152503.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:23.613Z,1510152503.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:23.960Z,1510152503.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:23.975Z,1510152503.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:24.353Z,1510152504.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:24.416Z,1510152504.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:24.739Z,1510152504.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:24.764Z,1510152504.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:25.136Z,1510152505.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:25.170Z,1510152505.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:25.536Z,1510152505.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:25.570Z,1510152505.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:25.966Z,1510152505.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:25.987Z,1510152505.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:26.335Z,1510152506.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:26.365Z,1510152506.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:26.756Z,1510152506.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:26.779Z,1510152506.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:27.434Z,1510152507.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:27.463Z,1510152507.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:27.573Z,1510152507.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:27.621Z,1510152507.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:27.993Z,1510152507.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:28.023Z,1510152508.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:28.389Z,1510152508.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:28.415Z,1510152508.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:28.793Z,1510152508.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:28.823Z,1510152508.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:29.183Z,1510152509.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:29.216Z,1510152509.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:29.576Z,1510152509.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:29.591Z,1510152509.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:30.012Z,1510152510.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:30.028Z,1510152510.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:30.388Z,1510152510.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:30.420Z,1510152510.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:31.068Z,1510152511.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:31.084Z,1510152511.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:31.185Z,1510152511.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:31.235Z,1510152511.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:31.612Z,1510152511.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:31.628Z,1510152511.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:32.012Z,1510152512.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:32.035Z,1510152512.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:32.413Z,1510152512.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:32.468Z,1510152512.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:32.795Z,1510152512.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:32.825Z,1510152512.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:33.195Z,1510152513.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:33.225Z,1510152513.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:33.596Z,1510152513.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:33.627Z,1510152513.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:34.023Z,1510152514.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:34.039Z,1510152514.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:34.391Z,1510152514.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:34.423Z,1510152514.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:34.816Z,1510152514.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:34.833Z,1510152514.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:35.482Z,1510152515.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:35.498Z,1510152515.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:35.634Z,1510152515.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:35.679Z,1510152515.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:36.061Z,1510152516.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:36.082Z,1510152516.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:36.461Z,1510152516.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:36.481Z,1510152516.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:36.846Z,1510152516.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:36.880Z,1510152516.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:37.240Z,1510152517.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:37.269Z,1510152517.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:37.673Z,1510152517.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:37.691Z,1510152517.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:38.049Z,1510152518.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:38.081Z,1510152518.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:38.864Z,1510152518.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:38.881Z,1510152518.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:38.987Z,1510152518.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:39.024Z,1510152519.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:39.406Z,1510152519.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:39.440Z,1510152519.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:39.805Z,1510152519.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:39.833Z,1510152519.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:40.206Z,1510152520.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:40.234Z,1510152520.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:40.596Z,1510152520.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:40.632Z,1510152520.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:40.992Z,1510152520.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:41.011Z,1510152521.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:41.397Z,1510152521.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:41.413Z,1510152521.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:41.818Z,1510152521.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:41.842Z,1510152521.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:42.210Z,1510152522.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:42.242Z,1510152522.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:42.928Z,1510152522.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:42.937Z,1510152522.937 [BPC1](ERROR): Failed to parse message.
2017-11-08T14:48:42.937Z,1510152522.937 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T14:48:42.937Z,1510152522.937 [BPC1] Data Fault, FailCount= 1
2017-11-08T14:48:42.937Z,1510152522.937 [BPC1](ERROR): Data Fault
2017-11-08T14:48:42.946Z,1510152522.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:43.029Z,1510152523.029 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T14:48:43.062Z,1510152523.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:43.092Z,1510152523.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:43.481Z,1510152523.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:43.497Z,1510152523.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:43.870Z,1510152523.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:43.905Z,1510152523.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:43.985Z,1510152523.985 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T14:48:43.985Z,1510152523.985 [BPC1] No Fault, FailCount= 1
2017-11-08T14:48:44.271Z,1510152524.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:44.351Z,1510152524.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:44.659Z,1510152524.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:44.696Z,1510152524.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:45.055Z,1510152525.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:45.089Z,1510152525.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:45.464Z,1510152525.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:45.498Z,1510152525.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:45.889Z,1510152525.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:45.911Z,1510152525.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:46.270Z,1510152526.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:46.304Z,1510152526.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:46.954Z,1510152526.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:46.972Z,1510152526.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:47.108Z,1510152527.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:47.147Z,1510152527.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:47.514Z,1510152527.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:47.545Z,1510152527.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:47.914Z,1510152527.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:47.945Z,1510152527.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:48.314Z,1510152528.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:48.346Z,1510152528.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:48.703Z,1510152528.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:48.723Z,1510152528.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:49.098Z,1510152529.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:49.115Z,1510152529.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:49.503Z,1510152529.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:49.520Z,1510152529.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:49.926Z,1510152529.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:49.960Z,1510152529.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:50.302Z,1510152530.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:50.318Z,1510152530.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:50.713Z,1510152530.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:50.746Z,1510152530.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:51.392Z,1510152531.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:51.408Z,1510152531.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:51.525Z,1510152531.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:51.559Z,1510152531.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:51.953Z,1510152531.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:51.969Z,1510152531.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:52.350Z,1510152532.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:52.404Z,1510152532.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:52.748Z,1510152532.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:52.765Z,1510152532.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:53.132Z,1510152533.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:53.167Z,1510152533.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:53.528Z,1510152533.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:53.564Z,1510152533.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:53.955Z,1510152533.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:53.972Z,1510152533.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:54.353Z,1510152534.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:54.372Z,1510152534.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:55.050Z,1510152535.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:55.071Z,1510152535.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:55.217Z,1510152535.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:55.255Z,1510152535.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:55.630Z,1510152535.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:55.670Z,1510152535.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:56.029Z,1510152536.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:56.064Z,1510152536.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:56.426Z,1510152536.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:56.458Z,1510152536.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:56.819Z,1510152536.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:56.836Z,1510152536.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:57.220Z,1510152537.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:57.279Z,1510152537.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:57.646Z,1510152537.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:57.669Z,1510152537.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:58.020Z,1510152538.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:58.048Z,1510152538.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:58.420Z,1510152538.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:58.436Z,1510152538.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:58.830Z,1510152538.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:58.846Z,1510152538.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:59.512Z,1510152539.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:59.528Z,1510152539.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:48:59.636Z,1510152539.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:48:59.680Z,1510152539.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:00.054Z,1510152540.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:00.093Z,1510152540.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:00.449Z,1510152540.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:00.491Z,1510152540.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:00.850Z,1510152540.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:00.885Z,1510152540.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:01.245Z,1510152541.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:01.277Z,1510152541.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:01.670Z,1510152541.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:01.689Z,1510152541.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:02.050Z,1510152542.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:02.087Z,1510152542.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:02.730Z,1510152542.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:02.746Z,1510152542.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:02.845Z,1510152542.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:02.895Z,1510152542.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:03.262Z,1510152543.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:03.297Z,1510152543.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:03.664Z,1510152543.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:03.700Z,1510152543.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:04.062Z,1510152544.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:04.105Z,1510152544.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:04.452Z,1510152544.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:04.508Z,1510152544.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:04.847Z,1510152544.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:04.863Z,1510152544.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:05.248Z,1510152545.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:05.269Z,1510152545.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:05.682Z,1510152545.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:05.740Z,1510152545.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:06.055Z,1510152546.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:06.071Z,1510152546.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:06.461Z,1510152546.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:06.515Z,1510152546.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:07.143Z,1510152547.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:07.159Z,1510152547.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:07.261Z,1510152547.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:07.319Z,1510152547.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:07.687Z,1510152547.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:07.713Z,1510152547.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:08.080Z,1510152548.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:08.106Z,1510152548.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:08.476Z,1510152548.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:08.516Z,1510152548.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:08.868Z,1510152548.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:08.908Z,1510152548.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:09.264Z,1510152549.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:09.310Z,1510152549.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:09.693Z,1510152549.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:09.710Z,1510152549.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:10.086Z,1510152550.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:10.109Z,1510152550.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:10.788Z,1510152550.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:10.804Z,1510152550.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:10.942Z,1510152550.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:10.959Z,1510152550.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:11.353Z,1510152551.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:11.370Z,1510152551.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:11.747Z,1510152551.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:11.765Z,1510152551.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:12.144Z,1510152552.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:12.161Z,1510152552.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:12.535Z,1510152552.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:12.564Z,1510152552.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:12.927Z,1510152552.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:12.960Z,1510152552.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:13.328Z,1510152553.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:13.354Z,1510152553.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:13.758Z,1510152553.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:13.778Z,1510152553.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:14.128Z,1510152554.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:14.224Z,1510152554.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:14.547Z,1510152554.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:14.606Z,1510152554.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:15.218Z,1510152555.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:15.252Z,1510152555.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:15.372Z,1510152555.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:15.413Z,1510152555.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:15.782Z,1510152555.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:15.809Z,1510152555.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:16.186Z,1510152556.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:16.225Z,1510152556.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:16.586Z,1510152556.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:16.618Z,1510152556.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:16.972Z,1510152556.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:17.006Z,1510152557.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:17.368Z,1510152557.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:17.397Z,1510152557.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:17.794Z,1510152557.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:17.817Z,1510152557.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:18.187Z,1510152558.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:18.219Z,1510152558.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:18.855Z,1510152558.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:18.871Z,1510152558.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:18.973Z,1510152558.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:19.006Z,1510152559.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:19.390Z,1510152559.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:19.416Z,1510152559.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:19.802Z,1510152559.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:19.817Z,1510152559.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:20.186Z,1510152560.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:20.219Z,1510152560.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:20.580Z,1510152560.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:20.604Z,1510152560.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:20.980Z,1510152560.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:20.996Z,1510152560.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:21.381Z,1510152561.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:21.413Z,1510152561.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:21.808Z,1510152561.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:21.825Z,1510152561.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:22.180Z,1510152562.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:22.196Z,1510152562.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:22.590Z,1510152562.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:22.622Z,1510152562.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:23.274Z,1510152563.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:23.294Z,1510152563.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:23.429Z,1510152563.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:23.446Z,1510152563.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:23.834Z,1510152563.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:23.851Z,1510152563.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:24.233Z,1510152564.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:24.252Z,1510152564.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:24.634Z,1510152564.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:24.650Z,1510152564.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:25.025Z,1510152565.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:25.041Z,1510152565.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:25.422Z,1510152565.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:25.491Z,1510152565.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:25.841Z,1510152565.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:25.871Z,1510152565.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:26.233Z,1510152566.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:26.250Z,1510152566.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:26.902Z,1510152566.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:26.947Z,1510152566.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:27.084Z,1510152567.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:27.127Z,1510152567.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:27.498Z,1510152567.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:27.551Z,1510152567.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:27.894Z,1510152567.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:27.925Z,1510152567.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:28.302Z,1510152568.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:28.373Z,1510152568.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:28.686Z,1510152568.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:28.702Z,1510152568.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:29.087Z,1510152569.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:29.103Z,1510152569.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:29.484Z,1510152569.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:29.500Z,1510152569.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:29.917Z,1510152569.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:29.933Z,1510152569.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:30.287Z,1510152570.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:30.303Z,1510152570.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:30.701Z,1510152570.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:30.731Z,1510152570.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:31.378Z,1510152571.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:31.394Z,1510152571.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:31.493Z,1510152571.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:31.539Z,1510152571.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:31.919Z,1510152571.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:31.940Z,1510152571.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:32.319Z,1510152572.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:32.336Z,1510152572.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:32.716Z,1510152572.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:32.732Z,1510152572.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:33.100Z,1510152573.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:33.131Z,1510152573.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:33.500Z,1510152573.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:33.529Z,1510152573.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:33.927Z,1510152573.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:33.943Z,1510152573.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:34.319Z,1510152574.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:34.339Z,1510152574.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:34.989Z,1510152574.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:35.005Z,1510152575.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:35.137Z,1510152575.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:35.179Z,1510152575.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:35.565Z,1510152575.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:35.588Z,1510152575.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:35.964Z,1510152575.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:35.981Z,1510152575.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:36.349Z,1510152576.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:36.403Z,1510152576.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:36.743Z,1510152576.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:36.776Z,1510152576.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:37.143Z,1510152577.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:37.184Z,1510152577.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:37.544Z,1510152577.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:37.560Z,1510152577.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:37.981Z,1510152577.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:37.998Z,1510152577.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:38.343Z,1510152578.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:38.364Z,1510152578.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:38.761Z,1510152578.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:38.789Z,1510152578.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:39.437Z,1510152579.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:39.453Z,1510152579.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:39.561Z,1510152579.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:39.595Z,1510152579.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:39.984Z,1510152579.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:39.000Z,1510152580.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:40.388Z,1510152580.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:40.411Z,1510152580.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:40.784Z,1510152580.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:40.800Z,1510152580.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:41.167Z,1510152581.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:41.202Z,1510152581.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:41.564Z,1510152581.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:41.595Z,1510152581.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:41.990Z,1510152581.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:42.011Z,1510152582.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:42.388Z,1510152582.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:42.404Z,1510152582.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:43.057Z,1510152583.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:43.086Z,1510152583.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:43.198Z,1510152583.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:43.246Z,1510152583.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:43.625Z,1510152583.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:43.641Z,1510152583.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:44.025Z,1510152584.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:44.041Z,1510152584.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:44.424Z,1510152584.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:44.440Z,1510152584.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:44.807Z,1510152584.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:44.838Z,1510152584.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:45.204Z,1510152585.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:45.240Z,1510152585.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:45.608Z,1510152585.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:45.640Z,1510152585.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:46.031Z,1510152586.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:46.048Z,1510152586.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:46.403Z,1510152586.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:46.423Z,1510152586.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:46.821Z,1510152586.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:46.852Z,1510152586.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:47.498Z,1510152587.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:47.567Z,1510152587.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:47.697Z,1510152587.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:47.726Z,1510152587.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:48.110Z,1510152588.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:48.128Z,1510152588.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:48.510Z,1510152588.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:48.526Z,1510152588.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:48.910Z,1510152588.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:48.964Z,1510152588.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:49.300Z,1510152589.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:49.317Z,1510152589.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:49.700Z,1510152589.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:49.740Z,1510152589.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:50.102Z,1510152590.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:50.119Z,1510152590.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:50.501Z,1510152590.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:50.559Z,1510152590.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:50.914Z,1510152590.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:50.930Z,1510152590.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:51.308Z,1510152591.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:51.324Z,1510152591.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:52.013Z,1510152592.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:52.029Z,1510152592.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:52.129Z,1510152592.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:52.153Z,1510152592.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:52.554Z,1510152592.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:52.578Z,1510152592.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:52.956Z,1510152592.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:52.973Z,1510152592.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:53.345Z,1510152593.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:53.372Z,1510152593.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:53.735Z,1510152593.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:53.772Z,1510152593.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:54.131Z,1510152594.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:54.147Z,1510152594.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:54.536Z,1510152594.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:54.552Z,1510152594.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:54.974Z,1510152594.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:54.995Z,1510152594.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:55.339Z,1510152595.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:55.360Z,1510152595.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:55.749Z,1510152595.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:55.786Z,1510152595.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:56.423Z,1510152596.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:56.439Z,1510152596.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:56.549Z,1510152596.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:56.565Z,1510152596.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:56.966Z,1510152596.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:56.999Z,1510152596.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:57.370Z,1510152597.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:57.396Z,1510152597.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:57.766Z,1510152597.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:57.792Z,1510152597.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:58.155Z,1510152598.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:58.192Z,1510152598.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:58.556Z,1510152598.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:58.599Z,1510152598.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:58.985Z,1510152598.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:59.001Z,1510152599.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:49:59.370Z,1510152599.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:49:59.403Z,1510152599.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:00.039Z,1510152600.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:00.055Z,1510152600.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:00.165Z,1510152600.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:00.201Z,1510152600.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:00.586Z,1510152600.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:00.608Z,1510152600.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:00.989Z,1510152600.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:01.005Z,1510152601.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:01.389Z,1510152601.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:01.405Z,1510152601.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:01.771Z,1510152601.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:01.802Z,1510152601.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:02.172Z,1510152602.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:02.202Z,1510152602.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:02.568Z,1510152602.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:02.607Z,1510152602.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:02.000Z,1510152603.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:03.016Z,1510152603.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:03.367Z,1510152603.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:03.403Z,1510152603.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:03.793Z,1510152603.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:03.809Z,1510152603.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:04.467Z,1510152604.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:04.484Z,1510152604.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:04.619Z,1510152604.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:04.659Z,1510152604.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:04.998Z,1510152604.998 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T14:50:04.998Z,1510152604.998 [NAL9602] Data Fault, FailCount= 4
2017-11-08T14:50:04.998Z,1510152604.998 [NAL9602](ERROR): Data Fault
2017-11-08T14:50:05.016Z,1510152605.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:05.032Z,1510152605.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:05.129Z,1510152605.129 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T14:50:05.393Z,1510152605.393 [NAL9602](INFO): Powering down
2017-11-08T14:50:05.411Z,1510152605.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:05.431Z,1510152605.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:05.814Z,1510152605.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:05.831Z,1510152605.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:06.210Z,1510152606.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:06.231Z,1510152606.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:06.333Z,1510152606.333 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T14:50:06.333Z,1510152606.333 [NAL9602] No Fault, FailCount= 4
2017-11-08T14:50:06.610Z,1510152606.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:06.626Z,1510152606.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:07.014Z,1510152607.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:07.030Z,1510152607.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:07.411Z,1510152607.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:07.443Z,1510152607.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:07.811Z,1510152607.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:07.843Z,1510152607.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:08.207Z,1510152608.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:08.231Z,1510152608.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:08.611Z,1510152608.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:08.646Z,1510152608.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:09.010Z,1510152609.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:09.057Z,1510152609.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:09.407Z,1510152609.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:09.465Z,1510152609.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:09.810Z,1510152609.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:09.841Z,1510152609.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:10.211Z,1510152610.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:10.241Z,1510152610.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:10.611Z,1510152610.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:10.665Z,1510152610.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:11.010Z,1510152611.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:11.045Z,1510152611.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:11.411Z,1510152611.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:11.441Z,1510152611.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:11.811Z,1510152611.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:11.859Z,1510152611.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:12.211Z,1510152612.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:12.248Z,1510152612.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:12.607Z,1510152612.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:12.652Z,1510152612.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:13.011Z,1510152613.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:13.046Z,1510152613.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:13.410Z,1510152613.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:13.441Z,1510152613.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:13.807Z,1510152613.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:13.844Z,1510152613.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:14.213Z,1510152614.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:14.241Z,1510152614.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:14.611Z,1510152614.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:14.641Z,1510152614.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:15.007Z,1510152615.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:15.043Z,1510152615.043 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:15.043Z,1510152615.043 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2017-11-08T14:50:15.043Z,1510152615.043 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T14:50:15.045Z,1510152615.045 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:15.045Z,1510152615.045 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29
2017-11-08T14:50:15.045Z,1510152615.045 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T14:50:15.047Z,1510152615.047 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:15.047Z,1510152615.047 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 29
2017-11-08T14:50:15.047Z,1510152615.047 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T14:50:15.125Z,1510152615.125 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T14:50:15.125Z,1510152615.125 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T14:50:15.126Z,1510152615.126 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T14:50:15.407Z,1510152615.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:15.517Z,1510152615.517 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T14:50:15.517Z,1510152615.517 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2017-11-08T14:50:15.517Z,1510152615.517 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T14:50:15.517Z,1510152615.517 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29
2017-11-08T14:50:15.518Z,1510152615.518 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T14:50:15.518Z,1510152615.518 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 29
2017-11-08T14:50:15.807Z,1510152615.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:15.840Z,1510152615.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T14:50:15.841Z,1510152615.841 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:50:15.841Z,1510152615.841 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:50:15.841Z,1510152615.841 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T14:50:15.842Z,1510152615.842 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:50:15.842Z,1510152615.842 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:50:15.843Z,1510152615.843 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T14:50:15.843Z,1510152615.843 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:50:15.843Z,1510152615.843 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:50:16.206Z,1510152616.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:16.222Z,1510152616.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T14:50:16.223Z,1510152616.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:16.610Z,1510152616.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:16.652Z,1510152616.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T14:50:16.653Z,1510152616.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:17.011Z,1510152617.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:17.051Z,1510152617.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T14:50:17.052Z,1510152617.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:17.410Z,1510152617.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:17.426Z,1510152617.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T14:50:17.427Z,1510152617.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:17.807Z,1510152617.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:17.827Z,1510152617.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T14:50:17.828Z,1510152617.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:18.211Z,1510152618.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:18.226Z,1510152618.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T14:50:18.227Z,1510152618.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:18.607Z,1510152618.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:18.622Z,1510152618.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T14:50:18.623Z,1510152618.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:19.011Z,1510152619.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:19.031Z,1510152619.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T14:50:19.032Z,1510152619.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:19.415Z,1510152619.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:19.435Z,1510152619.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T14:50:19.436Z,1510152619.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:19.808Z,1510152619.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:19.824Z,1510152619.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T14:50:19.825Z,1510152619.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:20.217Z,1510152620.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:20.233Z,1510152620.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T14:50:20.234Z,1510152620.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:20.615Z,1510152620.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:20.630Z,1510152620.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T14:50:20.631Z,1510152620.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:21.014Z,1510152621.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:21.060Z,1510152621.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T14:50:21.061Z,1510152621.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:21.415Z,1510152621.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:21.430Z,1510152621.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T14:50:21.431Z,1510152621.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:21.813Z,1510152621.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:21.829Z,1510152621.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T14:50:21.830Z,1510152621.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:22.214Z,1510152622.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:22.229Z,1510152622.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T14:50:22.230Z,1510152622.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:22.615Z,1510152622.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:22.635Z,1510152622.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T14:50:22.636Z,1510152622.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:23.015Z,1510152623.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:23.035Z,1510152623.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T14:50:23.036Z,1510152623.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:23.414Z,1510152623.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:23.429Z,1510152623.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T14:50:23.430Z,1510152623.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:23.859Z,1510152623.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:23.937Z,1510152623.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T14:50:23.938Z,1510152623.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:24.228Z,1510152624.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:24.326Z,1510152624.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T14:50:24.327Z,1510152624.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:24.610Z,1510152624.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:24.626Z,1510152624.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T14:50:24.627Z,1510152624.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:25.015Z,1510152625.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:25.031Z,1510152625.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T14:50:25.032Z,1510152625.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:25.415Z,1510152625.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:25.431Z,1510152625.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T14:50:25.432Z,1510152625.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:25.810Z,1510152625.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:25.826Z,1510152625.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T14:50:25.827Z,1510152625.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:26.218Z,1510152626.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:26.234Z,1510152626.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T14:50:26.235Z,1510152626.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:26.616Z,1510152626.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:26.633Z,1510152626.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T14:50:26.634Z,1510152626.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:27.017Z,1510152627.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:27.033Z,1510152627.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T14:50:27.034Z,1510152627.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:27.417Z,1510152627.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:27.433Z,1510152627.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T14:50:27.434Z,1510152627.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:27.817Z,1510152627.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:27.834Z,1510152627.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T14:50:27.835Z,1510152627.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:28.211Z,1510152628.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:28.236Z,1510152628.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T14:50:28.238Z,1510152628.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:28.617Z,1510152628.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:28.633Z,1510152628.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T14:50:28.634Z,1510152628.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:29.017Z,1510152629.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:29.033Z,1510152629.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T14:50:29.034Z,1510152629.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:29.418Z,1510152629.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:29.434Z,1510152629.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T14:50:29.435Z,1510152629.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:29.817Z,1510152629.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:29.833Z,1510152629.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T14:50:29.834Z,1510152629.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:30.217Z,1510152630.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:30.233Z,1510152630.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T14:50:30.234Z,1510152630.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:30.617Z,1510152630.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:30.633Z,1510152630.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T14:50:30.634Z,1510152630.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:31.017Z,1510152631.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:31.033Z,1510152631.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T14:50:31.034Z,1510152631.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:31.419Z,1510152631.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:31.435Z,1510152631.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T14:50:31.435Z,1510152631.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:31.819Z,1510152631.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:31.885Z,1510152631.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T14:50:31.886Z,1510152631.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:32.217Z,1510152632.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:32.233Z,1510152632.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T14:50:32.234Z,1510152632.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:32.618Z,1510152632.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:32.690Z,1510152632.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T14:50:32.691Z,1510152632.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:33.019Z,1510152633.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:33.034Z,1510152633.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T14:50:33.035Z,1510152633.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:33.418Z,1510152633.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:33.467Z,1510152633.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T14:50:33.468Z,1510152633.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:33.818Z,1510152633.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:33.839Z,1510152633.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T14:50:33.840Z,1510152633.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:34.218Z,1510152634.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:34.261Z,1510152634.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T14:50:34.262Z,1510152634.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:34.617Z,1510152634.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:34.634Z,1510152634.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T14:50:34.634Z,1510152634.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:35.017Z,1510152635.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:35.033Z,1510152635.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-08T14:50:35.034Z,1510152635.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:35.417Z,1510152635.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:35.433Z,1510152635.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:35.790Z,1510152635.790 [NAL9602](INFO): Powering up NAL9602
2017-11-08T14:50:35.816Z,1510152635.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:35.838Z,1510152635.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:36.218Z,1510152636.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:36.235Z,1510152636.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:36.613Z,1510152636.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:36.635Z,1510152636.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:37.014Z,1510152637.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:37.030Z,1510152637.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:37.417Z,1510152637.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:37.436Z,1510152637.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:37.817Z,1510152637.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:37.833Z,1510152637.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:38.217Z,1510152638.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:38.234Z,1510152638.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:38.617Z,1510152638.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:38.633Z,1510152638.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:39.017Z,1510152639.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:39.033Z,1510152639.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:39.417Z,1510152639.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:39.433Z,1510152639.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:39.816Z,1510152639.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:39.833Z,1510152639.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:40.217Z,1510152640.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:40.233Z,1510152640.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:40.613Z,1510152640.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:40.629Z,1510152640.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:41.016Z,1510152641.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:41.032Z,1510152641.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:41.416Z,1510152641.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:41.432Z,1510152641.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:41.813Z,1510152641.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:41.829Z,1510152641.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:42.216Z,1510152642.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:42.233Z,1510152642.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:42.617Z,1510152642.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:42.661Z,1510152642.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:43.013Z,1510152643.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:43.029Z,1510152643.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:43.417Z,1510152643.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:43.433Z,1510152643.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:43.816Z,1510152643.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:43.833Z,1510152643.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:44.217Z,1510152644.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:44.233Z,1510152644.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:44.616Z,1510152644.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:44.632Z,1510152644.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:45.016Z,1510152645.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:45.032Z,1510152645.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:45.417Z,1510152645.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:45.433Z,1510152645.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:45.816Z,1510152645.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:45.833Z,1510152645.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:46.221Z,1510152646.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:46.243Z,1510152646.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:46.590Z,1510152646.590 [NAL9602](INFO): NAL9602 initialized
2017-11-08T14:50:46.618Z,1510152646.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:46.634Z,1510152646.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:47.014Z,1510152647.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:47.042Z,1510152647.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:47.425Z,1510152647.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:47.441Z,1510152647.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:47.822Z,1510152647.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:47.838Z,1510152647.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:48.222Z,1510152648.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:48.238Z,1510152648.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:48.614Z,1510152648.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:48.635Z,1510152648.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:49.034Z,1510152649.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:49.062Z,1510152649.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:49.428Z,1510152649.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:49.445Z,1510152649.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:50.102Z,1510152650.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:50.118Z,1510152650.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:50.229Z,1510152650.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:50.279Z,1510152650.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:50.656Z,1510152650.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:50.672Z,1510152650.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:51.057Z,1510152651.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:51.073Z,1510152651.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:51.446Z,1510152651.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:51.476Z,1510152651.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:51.835Z,1510152651.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:51.869Z,1510152651.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:52.235Z,1510152652.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:52.272Z,1510152652.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:52.636Z,1510152652.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:52.668Z,1510152652.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:53.063Z,1510152653.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:53.084Z,1510152653.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:53.435Z,1510152653.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:53.492Z,1510152653.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:53.849Z,1510152653.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:53.880Z,1510152653.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:54.534Z,1510152654.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:54.584Z,1510152654.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:54.697Z,1510152654.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:54.743Z,1510152654.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:55.123Z,1510152655.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:55.183Z,1510152655.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:55.523Z,1510152655.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:55.539Z,1510152655.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:55.921Z,1510152655.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:55.976Z,1510152655.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:56.303Z,1510152656.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:56.336Z,1510152656.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:56.704Z,1510152656.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:56.731Z,1510152656.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:57.136Z,1510152657.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:57.152Z,1510152657.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:57.517Z,1510152657.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:57.550Z,1510152657.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:58.185Z,1510152658.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:58.200Z,1510152658.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:58.301Z,1510152658.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:58.353Z,1510152658.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:58.718Z,1510152658.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:58.743Z,1510152658.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:59.128Z,1510152659.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:59.143Z,1510152659.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:59.517Z,1510152659.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:59.545Z,1510152659.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:50:59.907Z,1510152659.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:50:59.940Z,1510152659.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:00.307Z,1510152660.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:00.322Z,1510152660.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:00.708Z,1510152660.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:00.724Z,1510152660.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:01.136Z,1510152661.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:01.151Z,1510152661.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:01.507Z,1510152661.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:01.523Z,1510152661.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:01.921Z,1510152661.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:01.949Z,1510152661.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:02.599Z,1510152662.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:02.619Z,1510152662.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:02.752Z,1510152662.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:02.795Z,1510152662.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:03.157Z,1510152663.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:03.173Z,1510152663.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:03.554Z,1510152663.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:03.570Z,1510152663.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:03.950Z,1510152663.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:04.003Z,1510152664.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:04.343Z,1510152664.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:04.364Z,1510152664.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:04.746Z,1510152664.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:04.762Z,1510152664.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:05.169Z,1510152665.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:05.193Z,1510152665.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:05.557Z,1510152665.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:05.573Z,1510152665.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:06.232Z,1510152666.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:06.249Z,1510152666.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:06.363Z,1510152666.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:06.403Z,1510152666.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:06.785Z,1510152666.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:06.801Z,1510152666.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:07.184Z,1510152667.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:07.201Z,1510152667.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:07.574Z,1510152667.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:07.605Z,1510152667.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:07.963Z,1510152667.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:08.000Z,1510152668.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:08.359Z,1510152668.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:08.399Z,1510152668.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:08.764Z,1510152668.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:08.780Z,1510152668.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:09.196Z,1510152669.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:09.212Z,1510152669.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:09.559Z,1510152669.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:09.580Z,1510152669.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:09.977Z,1510152669.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:10.008Z,1510152670.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:10.649Z,1510152670.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:10.665Z,1510152670.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:10.778Z,1510152670.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:10.811Z,1510152670.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:11.186Z,1510152671.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:11.217Z,1510152671.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:11.585Z,1510152671.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:11.612Z,1510152671.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:11.986Z,1510152671.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:12.012Z,1510152672.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:12.375Z,1510152672.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:12.410Z,1510152672.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:12.776Z,1510152672.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:12.810Z,1510152672.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:13.204Z,1510152673.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:13.221Z,1510152673.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:13.597Z,1510152673.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:13.613Z,1510152673.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:14.260Z,1510152674.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:14.283Z,1510152674.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:14.423Z,1510152674.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:14.468Z,1510152674.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:14.838Z,1510152674.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:14.887Z,1510152674.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:15.240Z,1510152675.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:15.267Z,1510152675.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:15.638Z,1510152675.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:15.691Z,1510152675.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:16.025Z,1510152676.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:16.042Z,1510152676.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:16.427Z,1510152676.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:16.443Z,1510152676.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:16.828Z,1510152676.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:16.887Z,1510152676.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:17.255Z,1510152677.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:17.272Z,1510152677.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:17.627Z,1510152677.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:17.683Z,1510152677.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:18.037Z,1510152678.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:18.074Z,1510152678.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:18.722Z,1510152678.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:18.738Z,1510152678.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:18.841Z,1510152678.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:18.876Z,1510152678.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:19.264Z,1510152679.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:19.284Z,1510152679.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:19.668Z,1510152679.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:19.685Z,1510152679.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:20.069Z,1510152680.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:20.110Z,1510152680.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:20.447Z,1510152680.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:20.472Z,1510152680.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:20.848Z,1510152680.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:20.880Z,1510152680.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:21.275Z,1510152681.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:21.292Z,1510152681.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:21.668Z,1510152681.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:21.716Z,1510152681.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:22.330Z,1510152682.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:22.346Z,1510152682.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:22.481Z,1510152682.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:22.497Z,1510152682.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:22.902Z,1510152682.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:22.932Z,1510152682.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:23.300Z,1510152683.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:23.324Z,1510152683.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:23.695Z,1510152683.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:23.735Z,1510152683.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:24.084Z,1510152684.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:24.101Z,1510152684.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:24.487Z,1510152684.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:24.504Z,1510152684.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:24.882Z,1510152684.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:24.925Z,1510152684.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:25.314Z,1510152685.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:25.320Z,1510152685.320 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-11-08T14:51:25.347Z,1510152685.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:25.684Z,1510152685.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:25.735Z,1510152685.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:26.105Z,1510152686.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:26.130Z,1510152686.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:26.839Z,1510152686.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:26.875Z,1510152686.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:26.988Z,1510152686.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:27.005Z,1510152687.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:27.410Z,1510152687.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:27.443Z,1510152687.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:27.802Z,1510152687.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:27.834Z,1510152687.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:28.206Z,1510152688.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:28.232Z,1510152688.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:28.596Z,1510152688.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:28.637Z,1510152688.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:29.020Z,1510152689.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:29.036Z,1510152689.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:29.409Z,1510152689.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:29.440Z,1510152689.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:30.080Z,1510152690.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:30.099Z,1510152690.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:30.205Z,1510152690.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:30.238Z,1510152690.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:30.628Z,1510152690.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:30.645Z,1510152690.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:31.032Z,1510152691.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:31.055Z,1510152691.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:31.428Z,1510152691.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:31.495Z,1510152691.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:31.815Z,1510152691.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:31.840Z,1510152691.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:32.215Z,1510152692.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:32.258Z,1510152692.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:32.612Z,1510152692.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:32.641Z,1510152692.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:33.039Z,1510152693.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:33.056Z,1510152693.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:33.407Z,1510152693.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:33.435Z,1510152693.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:33.822Z,1510152693.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:33.847Z,1510152693.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:34.943Z,1510152694.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:34.963Z,1510152694.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:35.098Z,1510152695.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:35.138Z,1510152695.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:35.502Z,1510152695.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:35.519Z,1510152695.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:35.900Z,1510152695.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:35.917Z,1510152695.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:36.302Z,1510152696.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:36.318Z,1510152696.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:36.693Z,1510152696.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:36.710Z,1510152696.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:37.091Z,1510152697.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:37.108Z,1510152697.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:37.493Z,1510152697.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:37.509Z,1510152697.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:37.893Z,1510152697.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:37.955Z,1510152697.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:38.309Z,1510152698.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:38.326Z,1510152698.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:38.701Z,1510152698.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:38.754Z,1510152698.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:39.382Z,1510152699.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:39.404Z,1510152699.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:39.523Z,1510152699.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:39.595Z,1510152699.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:39.947Z,1510152699.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:39.963Z,1510152699.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:40.344Z,1510152700.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:40.367Z,1510152700.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:40.739Z,1510152700.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:40.756Z,1510152700.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:41.124Z,1510152701.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:41.158Z,1510152701.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:41.527Z,1510152701.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:41.560Z,1510152701.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:41.924Z,1510152701.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:41.961Z,1510152701.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:42.354Z,1510152702.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:42.370Z,1510152702.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:42.727Z,1510152702.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:42.752Z,1510152702.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:43.143Z,1510152703.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:43.160Z,1510152703.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:43.815Z,1510152703.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:43.853Z,1510152703.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:43.964Z,1510152703.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:44.015Z,1510152704.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:44.382Z,1510152704.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:44.408Z,1510152704.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:44.793Z,1510152704.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:44.809Z,1510152704.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:45.182Z,1510152705.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:45.212Z,1510152705.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:45.572Z,1510152705.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:45.604Z,1510152705.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:45.000Z,1510152706.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:46.016Z,1510152706.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:46.381Z,1510152706.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:46.409Z,1510152706.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:47.057Z,1510152707.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:47.073Z,1510152707.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:47.169Z,1510152707.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:47.220Z,1510152707.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:47.596Z,1510152707.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:47.652Z,1510152707.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:47.996Z,1510152707.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:48.012Z,1510152708.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:48.397Z,1510152708.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:48.413Z,1510152708.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:48.771Z,1510152708.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:48.810Z,1510152708.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:49.175Z,1510152709.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:49.215Z,1510152709.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:49.576Z,1510152709.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:49.608Z,1510152709.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:50.008Z,1510152710.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:50.024Z,1510152710.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:50.371Z,1510152710.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:50.386Z,1510152710.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:50.785Z,1510152710.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:50.822Z,1510152710.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:51.470Z,1510152711.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:51.487Z,1510152711.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:51.615Z,1510152711.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:51.660Z,1510152711.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:52.025Z,1510152712.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:52.041Z,1510152712.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:52.426Z,1510152712.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:52.442Z,1510152712.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:52.821Z,1510152712.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:52.838Z,1510152712.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:53.218Z,1510152713.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:53.233Z,1510152713.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:53.617Z,1510152713.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:53.633Z,1510152713.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:54.033Z,1510152714.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:54.058Z,1510152714.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:54.425Z,1510152714.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:54.447Z,1510152714.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:55.142Z,1510152715.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:55.163Z,1510152715.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:55.283Z,1510152715.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:55.323Z,1510152715.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:55.706Z,1510152715.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:55.713Z,1510152715.713 [PNI_TCM](ERROR): CRC does not match. Expected:0x63539 got:0x13812
2017-11-08T14:51:55.733Z,1510152715.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:56.104Z,1510152716.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:56.124Z,1510152716.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:56.504Z,1510152716.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:56.521Z,1510152716.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:56.884Z,1510152716.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:56.915Z,1510152716.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:57.281Z,1510152717.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:57.290Z,1510152717.290 [PNI_TCM](ERROR): CRC does not match. Expected:0x47795 got:0x4017
2017-11-08T14:51:57.323Z,1510152717.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:57.686Z,1510152717.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:57.714Z,1510152717.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:58.120Z,1510152718.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:58.143Z,1510152718.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:58.483Z,1510152718.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:58.523Z,1510152718.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:58.899Z,1510152718.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:58.915Z,1510152718.915 [PNI_TCM](ERROR): CRC does not match. Expected:0x42925 got:0x6336
2017-11-08T14:51:58.943Z,1510152718.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:59.575Z,1510152719.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:59.647Z,1510152719.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:51:59.777Z,1510152719.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:51:59.843Z,1510152719.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:00.183Z,1510152720.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:00.199Z,1510152720.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:00.583Z,1510152720.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:00.634Z,1510152720.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:00.983Z,1510152720.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:01.004Z,1510152721.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:01.374Z,1510152721.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:01.430Z,1510152721.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:01.775Z,1510152721.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:01.791Z,1510152721.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:02.194Z,1510152722.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:02.210Z,1510152722.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:02.583Z,1510152722.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:02.599Z,1510152722.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:03.250Z,1510152723.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:03.278Z,1510152723.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:03.399Z,1510152723.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:03.432Z,1510152723.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:03.810Z,1510152723.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:03.835Z,1510152723.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:04.213Z,1510152724.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:04.239Z,1510152724.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:04.610Z,1510152724.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:04.642Z,1510152724.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:04.999Z,1510152724.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:05.016Z,1510152725.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:05.399Z,1510152725.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:05.415Z,1510152725.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:05.800Z,1510152725.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:05.844Z,1510152725.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:06.231Z,1510152726.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:06.293Z,1510152726.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:06.599Z,1510152726.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:06.615Z,1510152726.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:07.014Z,1510152727.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:07.040Z,1510152727.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:07.684Z,1510152727.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:07.700Z,1510152727.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:07.801Z,1510152727.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:07.852Z,1510152727.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:08.226Z,1510152728.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:08.247Z,1510152728.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:08.628Z,1510152728.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:08.645Z,1510152728.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:09.017Z,1510152729.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:09.051Z,1510152729.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:09.407Z,1510152729.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:09.455Z,1510152729.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:09.808Z,1510152729.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:09.843Z,1510152729.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:10.240Z,1510152730.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:10.256Z,1510152730.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:10.626Z,1510152730.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:10.647Z,1510152730.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:11.287Z,1510152731.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:11.307Z,1510152731.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:11.405Z,1510152731.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:11.429Z,1510152731.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:11.832Z,1510152731.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:11.848Z,1510152731.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:12.233Z,1510152732.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:12.255Z,1510152732.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:12.621Z,1510152732.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:12.657Z,1510152732.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:13.012Z,1510152733.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:13.028Z,1510152733.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:13.407Z,1510152733.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:13.423Z,1510152733.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:13.812Z,1510152733.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:13.828Z,1510152733.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:14.243Z,1510152734.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:14.259Z,1510152734.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:14.607Z,1510152734.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:14.627Z,1510152734.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:15.025Z,1510152735.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:15.055Z,1510152735.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:15.702Z,1510152735.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:15.718Z,1510152735.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:15.823Z,1510152735.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:15.859Z,1510152735.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:16.244Z,1510152736.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:16.260Z,1510152736.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:16.643Z,1510152736.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:16.660Z,1510152736.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:17.029Z,1510152737.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:17.067Z,1510152737.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:17.423Z,1510152737.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:17.452Z,1510152737.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:17.824Z,1510152737.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:17.857Z,1510152737.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:18.256Z,1510152738.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:18.273Z,1510152738.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:18.638Z,1510152738.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:18.664Z,1510152738.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:19.313Z,1510152739.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:19.335Z,1510152739.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:19.479Z,1510152739.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:19.523Z,1510152739.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:19.901Z,1510152739.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:19.917Z,1510152739.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:20.300Z,1510152740.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:20.317Z,1510152740.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:20.689Z,1510152740.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:20.722Z,1510152740.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:21.079Z,1510152741.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:21.139Z,1510152741.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:21.479Z,1510152741.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:21.535Z,1510152741.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:21.876Z,1510152741.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:21.892Z,1510152741.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:22.312Z,1510152742.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:22.360Z,1510152742.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:22.679Z,1510152742.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:22.720Z,1510152742.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:23.089Z,1510152743.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:23.135Z,1510152743.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:23.805Z,1510152743.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:23.828Z,1510152743.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:23.939Z,1510152743.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:23.971Z,1510152743.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:24.356Z,1510152744.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:24.372Z,1510152744.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:24.757Z,1510152744.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:24.772Z,1510152744.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:25.159Z,1510152745.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:25.175Z,1510152745.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:25.539Z,1510152745.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:25.569Z,1510152745.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:25.936Z,1510152745.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:25.972Z,1510152745.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:26.367Z,1510152746.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:26.383Z,1510152746.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:26.759Z,1510152746.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:26.776Z,1510152746.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:27.422Z,1510152747.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:27.444Z,1510152747.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:27.582Z,1510152747.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:27.618Z,1510152747.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:27.990Z,1510152747.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:28.022Z,1510152748.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:28.393Z,1510152748.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:28.421Z,1510152748.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:28.794Z,1510152748.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:28.820Z,1510152748.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:29.179Z,1510152749.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:29.200Z,1510152749.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:29.578Z,1510152749.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:29.594Z,1510152749.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:30.002Z,1510152750.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:30.025Z,1510152750.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:30.378Z,1510152750.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:30.394Z,1510152750.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:30.774Z,1510152750.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:30.790Z,1510152750.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:31.189Z,1510152751.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:31.243Z,1510152751.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:31.868Z,1510152751.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:31.885Z,1510152751.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:31.986Z,1510152751.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:32.031Z,1510152752.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:32.412Z,1510152752.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:32.428Z,1510152752.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:32.812Z,1510152752.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:32.828Z,1510152752.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:33.212Z,1510152753.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:33.229Z,1510152753.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:33.592Z,1510152753.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:33.627Z,1510152753.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:34.019Z,1510152754.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:34.039Z,1510152754.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:34.401Z,1510152754.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:34.430Z,1510152754.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:35.086Z,1510152755.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:35.102Z,1510152755.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:35.232Z,1510152755.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:35.279Z,1510152755.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:35.645Z,1510152755.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:35.676Z,1510152755.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:36.045Z,1510152756.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:36.086Z,1510152756.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:36.445Z,1510152756.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:36.476Z,1510152756.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:36.835Z,1510152756.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:36.851Z,1510152756.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:37.235Z,1510152757.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:37.252Z,1510152757.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:37.630Z,1510152757.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:37.647Z,1510152757.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:38.057Z,1510152758.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:38.085Z,1510152758.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:38.435Z,1510152758.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:38.476Z,1510152758.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:38.845Z,1510152758.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:38.878Z,1510152758.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:39.517Z,1510152759.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:39.533Z,1510152759.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:39.651Z,1510152759.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:39.691Z,1510152759.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:40.062Z,1510152760.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:40.094Z,1510152760.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:40.464Z,1510152760.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:40.502Z,1510152760.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:40.874Z,1510152760.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:40.892Z,1510152760.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:41.251Z,1510152761.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:41.287Z,1510152761.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:41.652Z,1510152761.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:41.688Z,1510152761.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:42.085Z,1510152762.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:42.103Z,1510152762.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:42.475Z,1510152762.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:42.492Z,1510152762.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:43.135Z,1510152763.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:43.204Z,1510152763.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:43.338Z,1510152763.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:43.354Z,1510152763.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:43.738Z,1510152763.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:43.799Z,1510152763.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:44.142Z,1510152764.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:44.158Z,1510152764.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:44.542Z,1510152764.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:44.564Z,1510152764.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:44.937Z,1510152764.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:44.954Z,1510152764.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:45.334Z,1510152765.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:45.385Z,1510152765.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:45.734Z,1510152765.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:45.750Z,1510152765.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:46.153Z,1510152766.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:46.207Z,1510152766.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:46.534Z,1510152766.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:46.550Z,1510152766.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:46.943Z,1510152766.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:46.964Z,1510152766.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:47.618Z,1510152767.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:47.639Z,1510152767.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:47.749Z,1510152767.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:47.765Z,1510152767.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:47.861Z,1510152767.861 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T14:52:48.170Z,1510152768.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:48.215Z,1510152768.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:48.570Z,1510152768.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:48.594Z,1510152768.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:48.970Z,1510152768.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:48.996Z,1510152768.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:49.355Z,1510152769.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:49.392Z,1510152769.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:49.756Z,1510152769.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:49.772Z,1510152769.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:50.185Z,1510152770.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:50.201Z,1510152770.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:50.570Z,1510152770.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:50.595Z,1510152770.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:51.240Z,1510152771.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:51.256Z,1510152771.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:51.357Z,1510152771.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:51.374Z,1510152771.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:51.778Z,1510152771.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:51.810Z,1510152771.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:52.174Z,1510152772.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:52.199Z,1510152772.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:52.574Z,1510152772.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:52.612Z,1510152772.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:52.963Z,1510152772.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:53.002Z,1510152773.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:53.363Z,1510152773.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:53.379Z,1510152773.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:53.764Z,1510152773.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:53.797Z,1510152773.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:54.195Z,1510152774.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:54.257Z,1510152774.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:54.563Z,1510152774.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:54.579Z,1510152774.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:54.978Z,1510152774.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:55.004Z,1510152775.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:55.652Z,1510152775.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:55.672Z,1510152775.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:55.783Z,1510152775.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:55.814Z,1510152775.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:56.205Z,1510152776.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:56.221Z,1510152776.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:56.603Z,1510152776.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:56.620Z,1510152776.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:56.994Z,1510152776.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:57.011Z,1510152777.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:57.384Z,1510152777.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:57.409Z,1510152777.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:57.793Z,1510152777.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:57.809Z,1510152777.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:58.207Z,1510152778.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:58.223Z,1510152778.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:58.605Z,1510152778.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:58.623Z,1510152778.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:59.273Z,1510152779.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:59.307Z,1510152779.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:59.421Z,1510152779.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:59.449Z,1510152779.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:52:59.848Z,1510152779.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:52:59.864Z,1510152779.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:00.247Z,1510152780.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:00.263Z,1510152780.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:00.633Z,1510152780.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:00.665Z,1510152780.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:01.028Z,1510152781.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:01.064Z,1510152781.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:01.427Z,1510152781.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:01.458Z,1510152781.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:01.828Z,1510152781.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:01.865Z,1510152781.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:02.263Z,1510152782.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:02.283Z,1510152782.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:02.627Z,1510152782.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:02.644Z,1510152782.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:03.037Z,1510152783.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:03.066Z,1510152783.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:03.716Z,1510152783.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:03.736Z,1510152783.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:03.847Z,1510152783.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:03.895Z,1510152783.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:04.263Z,1510152784.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:04.279Z,1510152784.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:04.661Z,1510152784.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:04.682Z,1510152784.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:05.068Z,1510152785.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:05.085Z,1510152785.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:05.447Z,1510152785.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:05.473Z,1510152785.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:05.848Z,1510152785.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:05.874Z,1510152785.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:06.275Z,1510152786.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:06.363Z,1510152786.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:06.669Z,1510152786.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:06.685Z,1510152786.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:07.366Z,1510152787.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:07.425Z,1510152787.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:07.543Z,1510152787.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:07.584Z,1510152787.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:07.954Z,1510152787.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:08.023Z,1510152788.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:08.349Z,1510152788.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:08.377Z,1510152788.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:08.746Z,1510152788.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:08.762Z,1510152788.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:09.138Z,1510152789.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:09.155Z,1510152789.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:09.534Z,1510152789.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:09.550Z,1510152789.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:09.939Z,1510152789.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:09.960Z,1510152789.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:10.362Z,1510152790.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:10.385Z,1510152790.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:10.738Z,1510152790.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:10.754Z,1510152790.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:11.149Z,1510152791.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:11.182Z,1510152791.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:11.826Z,1510152791.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:11.842Z,1510152791.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:11.953Z,1510152791.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:11.995Z,1510152791.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:12.379Z,1510152792.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:12.395Z,1510152792.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:12.779Z,1510152792.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:12.795Z,1510152792.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:13.177Z,1510152793.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:13.193Z,1510152793.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:13.560Z,1510152793.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:13.590Z,1510152793.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:13.960Z,1510152793.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:13.989Z,1510152793.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:14.388Z,1510152794.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:14.404Z,1510152794.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:14.779Z,1510152794.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:14.795Z,1510152794.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:15.438Z,1510152795.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:15.454Z,1510152795.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:15.553Z,1510152795.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:15.595Z,1510152795.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:15.979Z,1510152795.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:15.999Z,1510152795.999 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:15.999Z,1510152795.999 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2017-11-08T14:53:15.999Z,1510152795.999 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T14:53:16.001Z,1510152796.001 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:16.001Z,1510152796.001 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30
2017-11-08T14:53:16.001Z,1510152796.001 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T14:53:16.003Z,1510152796.003 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:16.003Z,1510152796.003 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 30
2017-11-08T14:53:16.003Z,1510152796.003 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T14:53:16.082Z,1510152796.082 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T14:53:16.082Z,1510152796.082 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T14:53:16.083Z,1510152796.083 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T14:53:16.369Z,1510152796.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:16.517Z,1510152796.517 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T14:53:16.517Z,1510152796.517 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2017-11-08T14:53:16.517Z,1510152796.517 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T14:53:16.517Z,1510152796.517 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30
2017-11-08T14:53:16.518Z,1510152796.518 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T14:53:16.518Z,1510152796.518 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 30
2017-11-08T14:53:16.769Z,1510152796.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:16.796Z,1510152796.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T14:53:16.796Z,1510152796.796 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:53:16.797Z,1510152796.797 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:53:16.797Z,1510152796.797 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T14:53:16.798Z,1510152796.798 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:53:16.798Z,1510152796.798 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:53:16.798Z,1510152796.798 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T14:53:16.799Z,1510152796.799 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:53:16.799Z,1510152796.799 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:53:17.167Z,1510152797.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:17.198Z,1510152797.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T14:53:17.199Z,1510152797.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:17.560Z,1510152797.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:17.583Z,1510152797.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T14:53:17.584Z,1510152797.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:17.985Z,1510152797.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:18.011Z,1510152798.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T14:53:18.012Z,1510152798.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:18.363Z,1510152798.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:18.379Z,1510152798.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T14:53:18.380Z,1510152798.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:18.766Z,1510152798.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:18.787Z,1510152798.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T14:53:18.788Z,1510152798.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:19.171Z,1510152799.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:19.304Z,1510152799.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2017-11-08T14:53:19.313Z,1510152799.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:20.197Z,1510152800.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:20.212Z,1510152800.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2017-11-08T14:53:20.213Z,1510152800.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:20.325Z,1510152800.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:20.376Z,1510152800.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T14:53:20.377Z,1510152800.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:20.751Z,1510152800.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:20.768Z,1510152800.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T14:53:20.769Z,1510152800.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:21.151Z,1510152801.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:21.167Z,1510152801.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T14:53:21.168Z,1510152801.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:21.550Z,1510152801.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:21.566Z,1510152801.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T14:53:21.567Z,1510152801.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:21.932Z,1510152801.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:21.966Z,1510152801.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T14:53:21.967Z,1510152801.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:22.331Z,1510152802.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:22.361Z,1510152802.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T14:53:22.362Z,1510152802.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:22.733Z,1510152802.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:22.763Z,1510152802.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T14:53:22.764Z,1510152802.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:23.159Z,1510152803.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:23.175Z,1510152803.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T14:53:23.176Z,1510152803.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:23.557Z,1510152803.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:23.584Z,1510152803.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T14:53:23.585Z,1510152803.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:24.225Z,1510152804.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:24.241Z,1510152804.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2017-11-08T14:53:24.242Z,1510152804.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:24.351Z,1510152804.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:24.391Z,1510152804.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T14:53:24.392Z,1510152804.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:24.772Z,1510152804.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:24.788Z,1510152804.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T14:53:24.789Z,1510152804.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:25.177Z,1510152805.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:25.193Z,1510152805.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T14:53:25.194Z,1510152805.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:25.574Z,1510152805.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:25.590Z,1510152805.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T14:53:25.591Z,1510152805.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:25.956Z,1510152805.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:25.991Z,1510152805.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T14:53:25.992Z,1510152805.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:26.351Z,1510152806.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:26.380Z,1510152806.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T14:53:26.385Z,1510152806.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:26.756Z,1510152806.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:26.789Z,1510152806.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T14:53:26.790Z,1510152806.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:27.184Z,1510152807.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:27.200Z,1510152807.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T14:53:27.201Z,1510152807.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:27.551Z,1510152807.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:27.567Z,1510152807.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T14:53:27.568Z,1510152807.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:27.961Z,1510152807.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:27.993Z,1510152807.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T14:53:27.994Z,1510152807.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:28.636Z,1510152808.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:28.703Z,1510152808.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2017-11-08T14:53:28.704Z,1510152808.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:28.840Z,1510152808.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:28.914Z,1510152808.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T14:53:28.915Z,1510152808.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:29.251Z,1510152809.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:29.272Z,1510152809.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T14:53:29.273Z,1510152809.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:29.647Z,1510152809.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:29.667Z,1510152809.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T14:53:29.668Z,1510152809.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:30.053Z,1510152810.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:30.107Z,1510152810.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T14:53:30.108Z,1510152810.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:30.428Z,1510152810.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:30.461Z,1510152810.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T14:53:30.462Z,1510152810.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:30.829Z,1510152810.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:30.876Z,1510152810.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T14:53:30.877Z,1510152810.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:31.255Z,1510152811.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:31.271Z,1510152811.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T14:53:31.272Z,1510152811.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:31.648Z,1510152811.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:31.671Z,1510152811.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T14:53:31.672Z,1510152811.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:32.317Z,1510152812.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:32.352Z,1510152812.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T14:53:32.353Z,1510152812.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:32.465Z,1510152812.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:32.490Z,1510152812.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T14:53:32.491Z,1510152812.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:32.894Z,1510152812.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:32.911Z,1510152812.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T14:53:32.912Z,1510152812.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:33.283Z,1510152813.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:33.311Z,1510152813.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T14:53:33.312Z,1510152813.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:33.687Z,1510152813.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:33.722Z,1510152813.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T14:53:33.722Z,1510152813.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:34.078Z,1510152814.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:34.094Z,1510152814.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T14:53:34.094Z,1510152814.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:34.471Z,1510152814.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:34.515Z,1510152814.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T14:53:34.516Z,1510152814.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:34.872Z,1510152814.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:34.891Z,1510152814.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T14:53:34.893Z,1510152814.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:35.295Z,1510152815.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:35.325Z,1510152815.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T14:53:35.326Z,1510152815.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:35.677Z,1510152815.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:35.692Z,1510152815.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-08T14:53:35.693Z,1510152815.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:36.085Z,1510152816.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:36.123Z,1510152816.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:36.763Z,1510152816.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:36.770Z,1510152816.770 [PNI_TCM](ERROR): CRC does not match. Expected:0x49774 got:0x49579
2017-11-08T14:53:36.795Z,1510152816.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:36.927Z,1510152816.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:36.943Z,1510152816.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:37.341Z,1510152817.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:37.368Z,1510152817.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:37.742Z,1510152817.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:37.765Z,1510152817.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:38.138Z,1510152818.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:38.168Z,1510152818.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:38.528Z,1510152818.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:38.544Z,1510152818.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:38.923Z,1510152818.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:38.975Z,1510152818.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:39.355Z,1510152819.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:39.372Z,1510152819.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:39.741Z,1510152819.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:39.776Z,1510152819.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:40.415Z,1510152820.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:40.436Z,1510152820.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:40.547Z,1510152820.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:40.578Z,1510152820.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:40.972Z,1510152820.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:40.989Z,1510152820.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:41.364Z,1510152821.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:41.381Z,1510152821.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:41.763Z,1510152821.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:41.781Z,1510152821.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:42.157Z,1510152822.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:42.174Z,1510152822.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:42.544Z,1510152822.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:42.570Z,1510152822.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:42.956Z,1510152822.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:42.973Z,1510152822.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:43.373Z,1510152823.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:43.389Z,1510152823.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:43.743Z,1510152823.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:43.777Z,1510152823.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:44.168Z,1510152824.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:44.185Z,1510152824.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:44.829Z,1510152824.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:44.846Z,1510152824.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:44.981Z,1510152824.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:44.997Z,1510152824.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:45.390Z,1510152825.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:45.422Z,1510152825.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:45.797Z,1510152825.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:45.831Z,1510152825.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:46.195Z,1510152826.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:46.227Z,1510152826.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:46.585Z,1510152826.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:46.602Z,1510152826.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:47.006Z,1510152827.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:47.035Z,1510152827.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:47.394Z,1510152827.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:47.427Z,1510152827.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:48.110Z,1510152828.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:48.136Z,1510152828.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:48.248Z,1510152828.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:48.273Z,1510152828.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:48.662Z,1510152828.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:48.695Z,1510152828.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:49.061Z,1510152829.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:49.094Z,1510152829.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:49.461Z,1510152829.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:49.487Z,1510152829.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:49.847Z,1510152829.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:49.864Z,1510152829.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:50.248Z,1510152830.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:50.264Z,1510152830.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:50.649Z,1510152830.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:50.707Z,1510152830.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:51.084Z,1510152831.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:51.152Z,1510152831.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:51.451Z,1510152831.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:51.466Z,1510152831.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:51.862Z,1510152831.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:51.916Z,1510152831.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:52.543Z,1510152832.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:52.563Z,1510152832.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:52.671Z,1510152832.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:52.740Z,1510152832.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:53.097Z,1510152833.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:53.113Z,1510152833.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:53.496Z,1510152833.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:53.512Z,1510152833.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:53.896Z,1510152833.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:53.998Z,1510152833.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:54.278Z,1510152834.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:54.413Z,1510152834.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:54.674Z,1510152834.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:54.700Z,1510152834.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:55.103Z,1510152835.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:55.119Z,1510152835.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:55.498Z,1510152835.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:55.519Z,1510152835.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:56.162Z,1510152836.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:56.201Z,1510152836.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:56.315Z,1510152836.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:56.351Z,1510152836.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:56.742Z,1510152836.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:56.757Z,1510152836.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:57.136Z,1510152837.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:57.153Z,1510152837.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:57.525Z,1510152837.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:57.557Z,1510152837.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:57.916Z,1510152837.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:57.932Z,1510152837.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:58.312Z,1510152838.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:58.328Z,1510152838.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:58.716Z,1510152838.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:58.733Z,1510152838.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:59.149Z,1510152839.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:59.165Z,1510152839.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:59.511Z,1510152839.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:59.528Z,1510152839.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:53:59.930Z,1510152839.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:53:59.962Z,1510152839.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:00.621Z,1510152840.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:00.637Z,1510152840.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:00.770Z,1510152840.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:00.836Z,1510152840.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:01.186Z,1510152841.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:01.218Z,1510152841.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:01.597Z,1510152841.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:01.613Z,1510152841.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:01.996Z,1510152841.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:02.013Z,1510152842.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:02.379Z,1510152842.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:02.410Z,1510152842.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:02.773Z,1510152842.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:02.808Z,1510152842.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:03.204Z,1510152843.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:03.221Z,1510152843.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:03.597Z,1510152843.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:03.613Z,1510152843.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:04.258Z,1510152844.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:04.274Z,1510152844.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:04.373Z,1510152844.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:04.419Z,1510152844.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:04.794Z,1510152844.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:04.816Z,1510152844.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:05.198Z,1510152845.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:05.219Z,1510152845.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:05.586Z,1510152845.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:05.618Z,1510152845.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:05.979Z,1510152845.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:06.010Z,1510152846.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:06.375Z,1510152846.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:06.407Z,1510152846.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:06.776Z,1510152846.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:06.792Z,1510152846.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:07.208Z,1510152847.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:07.225Z,1510152847.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:07.575Z,1510152847.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:07.591Z,1510152847.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:07.994Z,1510152847.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:08.027Z,1510152848.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:08.674Z,1510152848.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:08.690Z,1510152848.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:08.820Z,1510152848.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:08.862Z,1510152848.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:09.230Z,1510152849.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:09.247Z,1510152849.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:09.630Z,1510152849.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:09.646Z,1510152849.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:10.025Z,1510152850.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:10.044Z,1510152850.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:10.418Z,1510152850.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:10.441Z,1510152850.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:10.517Z,1510152850.517 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:54:10.517Z,1510152850.517 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T14:54:10.693Z,1510152850.693 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:54:10.693Z,1510152850.693 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:54:10.693Z,1510152850.693 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:54:10.693Z,1510152850.693 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T14:54:10.693Z,1510152850.693 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:54:10.817Z,1510152850.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:10.840Z,1510152850.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:10.913Z,1510152850.912 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:54:11.097Z,1510152851.097 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:54:11.181Z,1510152851.181 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:54:11.244Z,1510152851.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:11.302Z,1510152851.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:11.635Z,1510152851.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:11.653Z,1510152851.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:12.294Z,1510152852.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:12.310Z,1510152852.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:12.401Z,1510152852.401 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:54:12.401Z,1510152852.401 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T14:54:12.449Z,1510152852.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:12.491Z,1510152852.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:12.801Z,1510152852.801 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:54:12.801Z,1510152852.801 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:54:12.801Z,1510152852.801 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:54:12.801Z,1510152852.801 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T14:54:12.802Z,1510152852.802 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:54:12.852Z,1510152852.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:12.936Z,1510152852.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:13.029Z,1510152853.029 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:54:13.209Z,1510152853.209 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:54:13.269Z,1510152853.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:13.344Z,1510152853.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:13.401Z,1510152853.401 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:54:13.650Z,1510152853.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:13.669Z,1510152853.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:14.035Z,1510152854.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:14.095Z,1510152854.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:14.437Z,1510152854.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:14.460Z,1510152854.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:14.835Z,1510152854.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:14.903Z,1510152854.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:14.985Z,1510152854.985 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:54:14.985Z,1510152854.985 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T14:54:15.017Z,1510152855.017 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:54:15.017Z,1510152855.017 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:54:15.017Z,1510152855.017 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:54:15.018Z,1510152855.018 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T14:54:15.018Z,1510152855.018 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:54:15.250Z,1510152855.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:15.266Z,1510152855.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:15.357Z,1510152855.357 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:54:15.421Z,1510152855.421 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:54:15.509Z,1510152855.509 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:54:15.643Z,1510152855.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:15.664Z,1510152855.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:16.048Z,1510152856.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:16.064Z,1510152856.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:16.822Z,1510152856.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:16.844Z,1510152856.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:16.933Z,1510152856.933 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:54:16.933Z,1510152856.933 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T14:54:16.958Z,1510152856.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:16.975Z,1510152856.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:17.125Z,1510152857.125 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:54:17.125Z,1510152857.125 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:54:17.125Z,1510152857.125 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:54:17.125Z,1510152857.125 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T14:54:17.125Z,1510152857.125 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:54:17.374Z,1510152857.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:17.408Z,1510152857.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:17.486Z,1510152857.486 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:54:17.533Z,1510152857.533 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:54:17.623Z,1510152857.623 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:54:17.789Z,1510152857.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:17.808Z,1510152857.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:18.174Z,1510152858.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:18.209Z,1510152858.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:18.569Z,1510152858.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:18.602Z,1510152858.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:18.993Z,1510152858.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:19.009Z,1510152859.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:19.085Z,1510152859.085 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T14:54:19.085Z,1510152859.085 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T14:54:19.237Z,1510152859.237 [Rowe_600LCM](INFO): Initializing
2017-11-08T14:54:19.238Z,1510152859.238 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T14:54:19.238Z,1510152859.238 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T14:54:19.238Z,1510152859.238 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T14:54:19.238Z,1510152859.238 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T14:54:19.378Z,1510152859.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:19.414Z,1510152859.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:19.489Z,1510152859.489 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:54:19.489Z,1510152859.489 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T14:54:19.641Z,1510152859.641 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T14:54:19.734Z,1510152859.734 [Rowe_600LCM](INFO): Powering down
2017-11-08T14:54:20.058Z,1510152860.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:20.101Z,1510152860.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:20.216Z,1510152860.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:20.253Z,1510152860.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:20.641Z,1510152860.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:20.657Z,1510152860.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:21.030Z,1510152861.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:21.062Z,1510152861.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:21.438Z,1510152861.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:21.459Z,1510152861.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:21.820Z,1510152861.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:21.854Z,1510152861.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:22.219Z,1510152862.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:22.260Z,1510152862.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:22.620Z,1510152862.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:22.636Z,1510152862.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:23.051Z,1510152863.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:23.109Z,1510152863.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:23.419Z,1510152863.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:23.440Z,1510152863.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:23.833Z,1510152863.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:23.867Z,1510152863.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:24.511Z,1510152864.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:24.531Z,1510152864.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:24.643Z,1510152864.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:24.687Z,1510152864.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:25.060Z,1510152865.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:25.076Z,1510152865.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:25.465Z,1510152865.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:25.481Z,1510152865.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:25.858Z,1510152865.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:25.888Z,1510152865.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:26.239Z,1510152866.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:26.274Z,1510152866.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:26.644Z,1510152866.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:26.669Z,1510152866.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:27.066Z,1510152867.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:27.086Z,1510152867.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:27.459Z,1510152867.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:27.476Z,1510152867.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:28.117Z,1510152868.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:28.133Z,1510152868.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:28.266Z,1510152868.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:28.307Z,1510152868.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:28.682Z,1510152868.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:28.713Z,1510152868.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:29.081Z,1510152869.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:29.113Z,1510152869.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:29.470Z,1510152869.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:29.486Z,1510152869.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:29.867Z,1510152869.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:29.883Z,1510152869.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:30.267Z,1510152870.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:30.283Z,1510152870.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:30.665Z,1510152870.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:30.688Z,1510152870.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:31.090Z,1510152871.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:31.114Z,1510152871.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:31.466Z,1510152871.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:31.482Z,1510152871.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:31.875Z,1510152871.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:31.891Z,1510152871.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:32.566Z,1510152872.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:32.588Z,1510152872.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:32.722Z,1510152872.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:32.759Z,1510152872.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:33.130Z,1510152873.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:33.162Z,1510152873.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:33.530Z,1510152873.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:33.546Z,1510152873.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:33.926Z,1510152873.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:33.986Z,1510152873.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:34.321Z,1510152874.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:34.338Z,1510152874.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:34.718Z,1510152874.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:34.802Z,1510152874.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:35.138Z,1510152875.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:35.216Z,1510152875.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:35.530Z,1510152875.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:35.547Z,1510152875.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:36.211Z,1510152876.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:36.268Z,1510152876.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:36.379Z,1510152876.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:36.423Z,1510152876.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:36.804Z,1510152876.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:36.869Z,1510152876.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:37.193Z,1510152877.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:37.226Z,1510152877.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:37.605Z,1510152877.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:37.621Z,1510152877.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:37.984Z,1510152877.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:38.008Z,1510152878.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:38.383Z,1510152878.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:38.400Z,1510152878.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:38.788Z,1510152878.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:38.804Z,1510152878.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:39.217Z,1510152879.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:39.233Z,1510152879.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:39.588Z,1510152879.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:39.604Z,1510152879.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:40.001Z,1510152880.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:40.030Z,1510152880.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:40.880Z,1510152880.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:40.896Z,1510152880.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:41.007Z,1510152881.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:41.056Z,1510152881.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:41.428Z,1510152881.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:41.444Z,1510152881.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:41.823Z,1510152881.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:41.843Z,1510152881.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:42.228Z,1510152882.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:42.245Z,1510152882.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:42.607Z,1510152882.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:42.638Z,1510152882.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:43.030Z,1510152883.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:43.051Z,1510152883.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:43.428Z,1510152883.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:43.444Z,1510152883.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:44.097Z,1510152884.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:44.126Z,1510152884.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:44.241Z,1510152884.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:44.291Z,1510152884.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:44.667Z,1510152884.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:44.696Z,1510152884.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:45.061Z,1510152885.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:45.131Z,1510152885.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:45.457Z,1510152885.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:45.490Z,1510152885.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:45.848Z,1510152885.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:45.864Z,1510152885.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:46.247Z,1510152886.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:46.268Z,1510152886.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:46.651Z,1510152886.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:46.668Z,1510152886.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:47.074Z,1510152887.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:47.098Z,1510152887.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:47.450Z,1510152887.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:47.466Z,1510152887.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:47.857Z,1510152887.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:47.874Z,1510152887.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:48.536Z,1510152888.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:48.552Z,1510152888.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:48.673Z,1510152888.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:48.715Z,1510152888.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:49.095Z,1510152889.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:49.115Z,1510152889.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:49.499Z,1510152889.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:49.514Z,1510152889.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:49.890Z,1510152889.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:49.910Z,1510152889.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:50.285Z,1510152890.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:50.301Z,1510152890.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:50.685Z,1510152890.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:50.713Z,1510152890.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:51.102Z,1510152891.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:51.118Z,1510152891.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:51.499Z,1510152891.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:51.520Z,1510152891.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:52.201Z,1510152892.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:52.223Z,1510152892.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:52.355Z,1510152892.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:52.399Z,1510152892.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:52.766Z,1510152892.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:52.796Z,1510152892.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:53.165Z,1510152893.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:53.193Z,1510152893.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:53.566Z,1510152893.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:53.606Z,1510152893.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:53.954Z,1510152893.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:53.971Z,1510152893.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:54.354Z,1510152894.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:54.370Z,1510152894.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:54.755Z,1510152894.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:54.776Z,1510152894.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:55.182Z,1510152895.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:55.206Z,1510152895.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:55.554Z,1510152895.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:55.570Z,1510152895.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:55.966Z,1510152895.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:56.007Z,1510152896.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:56.651Z,1510152896.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:56.676Z,1510152896.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:56.810Z,1510152896.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:56.879Z,1510152896.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:57.224Z,1510152897.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:57.283Z,1510152897.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:57.613Z,1510152897.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:57.629Z,1510152897.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:58.013Z,1510152898.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:58.059Z,1510152898.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:58.405Z,1510152898.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:58.421Z,1510152898.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:58.805Z,1510152898.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:58.852Z,1510152898.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:59.225Z,1510152899.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:59.255Z,1510152899.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:54:59.613Z,1510152899.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:54:59.632Z,1510152899.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:00.293Z,1510152900.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:00.309Z,1510152900.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:00.423Z,1510152900.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:00.468Z,1510152900.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:00.844Z,1510152900.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:00.860Z,1510152900.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:01.244Z,1510152901.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:01.259Z,1510152901.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:01.645Z,1510152901.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:01.661Z,1510152901.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:02.023Z,1510152902.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:02.055Z,1510152902.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:02.423Z,1510152902.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:02.438Z,1510152902.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:02.824Z,1510152902.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:02.840Z,1510152902.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:03.254Z,1510152903.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:03.280Z,1510152903.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:03.626Z,1510152903.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:03.641Z,1510152903.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:04.033Z,1510152904.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:04.065Z,1510152904.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:04.718Z,1510152904.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:04.735Z,1510152904.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:04.833Z,1510152904.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:04.885Z,1510152904.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:05.262Z,1510152905.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:05.281Z,1510152905.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:05.649Z,1510152905.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:05.695Z,1510152905.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:06.045Z,1510152906.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:06.072Z,1510152906.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:06.440Z,1510152906.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:06.478Z,1510152906.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:06.836Z,1510152906.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:06.852Z,1510152906.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:07.257Z,1510152907.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:07.320Z,1510152907.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:07.653Z,1510152907.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:07.685Z,1510152907.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:08.327Z,1510152908.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:08.347Z,1510152908.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:08.453Z,1510152908.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:08.488Z,1510152908.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:08.880Z,1510152908.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:08.915Z,1510152908.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:09.277Z,1510152909.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:09.340Z,1510152909.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.423002 seconds old.
2017-11-08T14:55:09.341Z,1510152909.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:09.342Z,1510152909.342 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.425647 seconds old.
2017-11-08T14:55:09.343Z,1510152909.343 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.409767 seconds old.
2017-11-08T14:55:09.674Z,1510152909.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:09.693Z,1510152909.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.778558 seconds old.
2017-11-08T14:55:09.694Z,1510152909.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:09.695Z,1510152909.695 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.778893 seconds old.
2017-11-08T14:55:09.696Z,1510152909.696 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.762969 seconds old.
2017-11-08T14:55:10.061Z,1510152910.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:10.094Z,1510152910.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.178860 seconds old.
2017-11-08T14:55:10.095Z,1510152910.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:10.095Z,1510152910.095 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.179199 seconds old.
2017-11-08T14:55:10.101Z,1510152910.101 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.163271 seconds old.
2017-11-08T14:55:10.455Z,1510152910.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:10.492Z,1510152910.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.576872 seconds old.
2017-11-08T14:55:10.494Z,1510152910.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:10.495Z,1510152910.495 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.578545 seconds old.
2017-11-08T14:55:10.497Z,1510152910.497 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.563233 seconds old.
2017-11-08T14:55:10.856Z,1510152910.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:10.883Z,1510152910.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:11.294Z,1510152911.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:11.310Z,1510152911.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:11.660Z,1510152911.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:11.694Z,1510152911.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:12.080Z,1510152912.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:12.115Z,1510152912.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:12.753Z,1510152912.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:12.760Z,1510152912.760 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-08T14:55:12.790Z,1510152912.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:12.904Z,1510152912.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:12.946Z,1510152912.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:13.328Z,1510152913.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:13.344Z,1510152913.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:13.735Z,1510152913.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:13.751Z,1510152913.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:14.132Z,1510152914.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:14.148Z,1510152914.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:14.511Z,1510152914.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:14.544Z,1510152914.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:14.913Z,1510152914.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:14.949Z,1510152914.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:15.343Z,1510152915.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:15.360Z,1510152915.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:15.725Z,1510152915.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:15.763Z,1510152915.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:16.400Z,1510152916.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:16.419Z,1510152916.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:16.527Z,1510152916.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:16.557Z,1510152916.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:16.943Z,1510152916.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:16.964Z,1510152916.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:17.348Z,1510152917.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:17.372Z,1510152917.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:17.743Z,1510152917.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:17.760Z,1510152917.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:18.127Z,1510152918.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:18.160Z,1510152918.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:18.527Z,1510152918.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:18.563Z,1510152918.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:18.924Z,1510152918.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:18.954Z,1510152918.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:19.355Z,1510152919.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:19.439Z,1510152919.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:19.727Z,1510152919.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:19.763Z,1510152919.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:20.148Z,1510152920.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:20.215Z,1510152920.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:20.814Z,1510152920.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:20.830Z,1510152920.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:20.971Z,1510152920.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:21.019Z,1510152921.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:21.378Z,1510152921.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:21.407Z,1510152921.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:21.774Z,1510152921.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:21.811Z,1510152921.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:22.178Z,1510152922.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:22.204Z,1510152922.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:22.566Z,1510152922.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:22.584Z,1510152922.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:22.986Z,1510152922.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:23.009Z,1510152923.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:23.378Z,1510152923.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:23.414Z,1510152923.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:24.052Z,1510152924.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:24.069Z,1510152924.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:24.173Z,1510152924.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:24.197Z,1510152924.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:24.598Z,1510152924.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:24.620Z,1510152924.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:24.990Z,1510152924.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:25.022Z,1510152925.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:25.386Z,1510152925.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:25.419Z,1510152925.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:25.780Z,1510152925.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:25.813Z,1510152925.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:26.180Z,1510152926.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:26.233Z,1510152926.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:26.576Z,1510152926.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:26.616Z,1510152926.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:27.017Z,1510152927.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:27.033Z,1510152927.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:27.376Z,1510152927.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:27.393Z,1510152927.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:27.788Z,1510152927.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:27.817Z,1510152927.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:28.468Z,1510152928.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:28.488Z,1510152928.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:28.590Z,1510152928.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:28.615Z,1510152928.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:29.017Z,1510152929.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:29.072Z,1510152929.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:29.421Z,1510152929.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:29.437Z,1510152929.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:29.806Z,1510152929.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:29.839Z,1510152929.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:30.200Z,1510152930.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:30.237Z,1510152930.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:30.597Z,1510152930.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:30.630Z,1510152930.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:31.032Z,1510152931.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:31.049Z,1510152931.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:31.414Z,1510152931.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:31.448Z,1510152931.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:32.082Z,1510152932.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:32.098Z,1510152932.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:32.198Z,1510152932.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:32.254Z,1510152932.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:32.625Z,1510152932.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:32.641Z,1510152932.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:33.026Z,1510152933.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:33.043Z,1510152933.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:33.426Z,1510152933.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:33.442Z,1510152933.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:33.803Z,1510152933.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:33.836Z,1510152933.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:34.204Z,1510152934.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:34.220Z,1510152934.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:34.604Z,1510152934.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:34.647Z,1510152934.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:35.040Z,1510152935.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:35.056Z,1510152935.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:35.408Z,1510152935.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:35.424Z,1510152935.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:35.817Z,1510152935.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:35.854Z,1510152935.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:36.498Z,1510152936.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:36.515Z,1510152936.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:36.627Z,1510152936.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:36.675Z,1510152936.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:37.048Z,1510152937.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:37.065Z,1510152937.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:37.447Z,1510152937.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:37.463Z,1510152937.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:37.847Z,1510152937.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:37.864Z,1510152937.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:38.241Z,1510152938.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:38.260Z,1510152938.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:38.628Z,1510152938.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:38.653Z,1510152938.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:39.055Z,1510152939.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:39.076Z,1510152939.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:39.447Z,1510152939.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:39.464Z,1510152939.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:40.110Z,1510152940.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:40.127Z,1510152940.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:40.258Z,1510152940.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:40.303Z,1510152940.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:40.666Z,1510152940.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:40.721Z,1510152940.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:41.065Z,1510152941.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:41.127Z,1510152941.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:41.466Z,1510152941.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:41.482Z,1510152941.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:41.857Z,1510152941.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:41.915Z,1510152941.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:42.258Z,1510152942.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:42.273Z,1510152942.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:42.659Z,1510152942.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:42.715Z,1510152942.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:43.077Z,1510152943.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:43.106Z,1510152943.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:43.458Z,1510152943.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:43.473Z,1510152943.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:43.865Z,1510152943.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:43.887Z,1510152943.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:44.582Z,1510152944.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:44.610Z,1510152944.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:44.721Z,1510152944.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:44.771Z,1510152944.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:45.149Z,1510152945.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:45.166Z,1510152945.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:45.537Z,1510152945.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:45.571Z,1510152945.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:45.933Z,1510152945.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:45.967Z,1510152945.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:46.327Z,1510152946.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:46.360Z,1510152946.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:46.728Z,1510152946.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:46.744Z,1510152946.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:47.156Z,1510152947.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:47.173Z,1510152947.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:47.541Z,1510152947.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:47.569Z,1510152947.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:48.215Z,1510152948.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:48.231Z,1510152948.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:48.333Z,1510152948.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:48.378Z,1510152948.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:48.759Z,1510152948.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:48.779Z,1510152948.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:49.156Z,1510152949.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:49.172Z,1510152949.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:49.556Z,1510152949.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:49.572Z,1510152949.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:49.939Z,1510152949.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:49.970Z,1510152949.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:50.335Z,1510152950.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:50.376Z,1510152950.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:50.736Z,1510152950.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:50.787Z,1510152950.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:51.172Z,1510152951.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:51.188Z,1510152951.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:51.535Z,1510152951.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:51.572Z,1510152951.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:51.949Z,1510152951.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:51.977Z,1510152951.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:52.634Z,1510152952.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:52.650Z,1510152952.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:52.784Z,1510152952.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:52.823Z,1510152952.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:53.194Z,1510152953.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:53.222Z,1510152953.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:53.598Z,1510152953.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:53.623Z,1510152953.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:53.998Z,1510152953.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:54.021Z,1510152954.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:54.387Z,1510152954.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:54.424Z,1510152954.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:54.788Z,1510152954.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:54.833Z,1510152954.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:55.224Z,1510152955.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:55.246Z,1510152955.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:55.602Z,1510152955.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:55.627Z,1510152955.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:56.277Z,1510152956.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:56.293Z,1510152956.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:56.397Z,1510152956.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:56.438Z,1510152956.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:56.820Z,1510152956.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:56.836Z,1510152956.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:57.218Z,1510152957.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:57.247Z,1510152957.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:57.620Z,1510152957.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:57.636Z,1510152957.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:58.003Z,1510152958.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:58.032Z,1510152958.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:58.404Z,1510152958.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:58.435Z,1510152958.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:58.804Z,1510152958.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:58.834Z,1510152958.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:59.232Z,1510152959.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:59.248Z,1510152959.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:55:59.604Z,1510152959.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:55:59.635Z,1510152959.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:00.024Z,1510152960.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:00.041Z,1510152960.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:00.698Z,1510152960.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:00.733Z,1510152960.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:00.848Z,1510152960.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:00.888Z,1510152960.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:01.256Z,1510152961.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:01.283Z,1510152961.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:01.653Z,1510152961.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:01.688Z,1510152961.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:02.054Z,1510152962.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:02.080Z,1510152962.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:02.442Z,1510152962.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:02.490Z,1510152962.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:02.840Z,1510152962.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:02.855Z,1510152962.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:03.275Z,1510152963.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:03.295Z,1510152963.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:03.659Z,1510152963.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:03.693Z,1510152963.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:04.323Z,1510152964.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:04.339Z,1510152964.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:04.455Z,1510152964.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:04.490Z,1510152964.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:04.875Z,1510152964.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:04.907Z,1510152964.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:05.276Z,1510152965.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:05.296Z,1510152965.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:05.674Z,1510152965.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:05.696Z,1510152965.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:06.060Z,1510152966.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:06.080Z,1510152966.080 [BPC1](ERROR): Failed to receive battery data
2017-11-08T14:56:06.080Z,1510152966.080 [BPC1] Communications Fault, FailCount= 1
2017-11-08T14:56:06.080Z,1510152966.080 [BPC1](ERROR): Communications Fault
2017-11-08T14:56:06.089Z,1510152966.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:06.165Z,1510152966.165 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T14:56:06.451Z,1510152966.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:06.489Z,1510152966.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:06.853Z,1510152966.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:06.877Z,1510152966.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:07.290Z,1510152967.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:07.306Z,1510152967.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:07.381Z,1510152967.381 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T14:56:07.381Z,1510152967.381 [BPC1] No Fault, FailCount= 1
2017-11-08T14:56:07.651Z,1510152967.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:07.743Z,1510152967.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:08.070Z,1510152968.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:08.115Z,1510152968.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:08.750Z,1510152968.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:08.756Z,1510152968.756 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-11-08T14:56:08.795Z,1510152968.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:08.904Z,1510152968.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:08.929Z,1510152968.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:09.333Z,1510152969.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:09.349Z,1510152969.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:09.735Z,1510152969.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:09.751Z,1510152969.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:10.121Z,1510152970.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:10.155Z,1510152970.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:10.512Z,1510152970.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:10.536Z,1510152970.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:10.908Z,1510152970.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:10.924Z,1510152970.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:11.344Z,1510152971.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:11.361Z,1510152971.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:11.738Z,1510152971.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:11.754Z,1510152971.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:12.395Z,1510152972.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:12.411Z,1510152972.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:12.514Z,1510152972.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:12.538Z,1510152972.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:12.938Z,1510152972.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:12.960Z,1510152972.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:13.330Z,1510152973.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:13.362Z,1510152973.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:13.741Z,1510152973.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:13.758Z,1510152973.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:14.120Z,1510152974.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:14.148Z,1510152974.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:14.524Z,1510152974.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:14.561Z,1510152974.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:14.916Z,1510152974.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:14.933Z,1510152974.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:15.346Z,1510152975.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:15.371Z,1510152975.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:15.734Z,1510152975.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:15.791Z,1510152975.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:16.404Z,1510152976.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:16.421Z,1510152976.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:16.536Z,1510152976.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:16.577Z,1510152976.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:16.957Z,1510152976.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:16.974Z,1510152976.974 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:16.974Z,1510152976.974 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2017-11-08T14:56:16.974Z,1510152976.974 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T14:56:16.976Z,1510152976.976 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:16.976Z,1510152976.976 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31
2017-11-08T14:56:16.976Z,1510152976.976 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T14:56:16.978Z,1510152976.978 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:16.978Z,1510152976.978 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 31
2017-11-08T14:56:16.978Z,1510152976.978 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T14:56:17.057Z,1510152977.057 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T14:56:17.057Z,1510152977.057 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T14:56:17.058Z,1510152977.058 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T14:56:17.354Z,1510152977.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:17.454Z,1510152977.454 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T14:56:17.454Z,1510152977.454 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2017-11-08T14:56:17.454Z,1510152977.454 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T14:56:17.454Z,1510152977.454 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31
2017-11-08T14:56:17.455Z,1510152977.455 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T14:56:17.455Z,1510152977.455 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 31
2017-11-08T14:56:17.756Z,1510152977.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:17.773Z,1510152977.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T14:56:17.773Z,1510152977.773 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:56:17.773Z,1510152977.773 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:56:17.774Z,1510152977.774 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T14:56:17.774Z,1510152977.774 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:56:17.774Z,1510152977.774 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:56:17.775Z,1510152977.775 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T14:56:17.775Z,1510152977.775 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:56:17.775Z,1510152977.775 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:56:18.136Z,1510152978.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:18.152Z,1510152978.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T14:56:18.153Z,1510152978.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:18.534Z,1510152978.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:18.550Z,1510152978.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T14:56:18.551Z,1510152978.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:18.936Z,1510152978.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:18.951Z,1510152978.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T14:56:18.952Z,1510152978.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:19.369Z,1510152979.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:19.391Z,1510152979.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T14:56:19.392Z,1510152979.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:19.749Z,1510152979.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:19.778Z,1510152979.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T14:56:19.779Z,1510152979.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:20.427Z,1510152980.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:20.442Z,1510152980.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2017-11-08T14:56:20.443Z,1510152980.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:20.545Z,1510152980.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:20.560Z,1510152980.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T14:56:20.561Z,1510152980.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:20.962Z,1510152980.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:20.988Z,1510152980.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T14:56:20.990Z,1510152980.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:21.365Z,1510152981.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:21.391Z,1510152981.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T14:56:21.392Z,1510152981.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:21.762Z,1510152981.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:21.788Z,1510152981.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T14:56:21.789Z,1510152981.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:22.151Z,1510152982.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:22.191Z,1510152982.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T14:56:22.192Z,1510152982.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:22.547Z,1510152982.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:22.563Z,1510152982.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T14:56:22.564Z,1510152982.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:22.951Z,1510152982.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:22.967Z,1510152982.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T14:56:22.968Z,1510152982.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:23.374Z,1510152983.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:23.399Z,1510152983.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T14:56:23.400Z,1510152983.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:23.752Z,1510152983.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:23.767Z,1510152983.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T14:56:23.768Z,1510152983.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:24.155Z,1510152984.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:24.176Z,1510152984.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T14:56:24.193Z,1510152984.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:24.555Z,1510152984.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:24.576Z,1510152984.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T14:56:24.577Z,1510152984.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:24.954Z,1510152984.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:24.970Z,1510152984.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T14:56:24.971Z,1510152984.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:25.350Z,1510152985.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:25.375Z,1510152985.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T14:56:25.376Z,1510152985.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:25.758Z,1510152985.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:25.774Z,1510152985.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T14:56:25.775Z,1510152985.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:26.154Z,1510152986.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:26.175Z,1510152986.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T14:56:26.176Z,1510152986.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:26.551Z,1510152986.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:26.625Z,1510152986.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T14:56:26.626Z,1510152986.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:26.955Z,1510152986.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:26.977Z,1510152986.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T14:56:26.978Z,1510152986.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:27.358Z,1510152987.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:27.375Z,1510152987.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T14:56:27.376Z,1510152987.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:27.751Z,1510152987.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:27.810Z,1510152987.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T14:56:27.811Z,1510152987.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:28.166Z,1510152988.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:28.184Z,1510152988.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T14:56:28.185Z,1510152988.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:28.834Z,1510152988.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:28.879Z,1510152988.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2017-11-08T14:56:28.880Z,1510152988.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:29.019Z,1510152989.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:29.035Z,1510152989.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T14:56:29.036Z,1510152989.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:29.430Z,1510152989.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:29.465Z,1510152989.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T14:56:29.466Z,1510152989.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:29.825Z,1510152989.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:29.841Z,1510152989.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T14:56:29.842Z,1510152989.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:30.227Z,1510152990.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:30.247Z,1510152990.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T14:56:30.248Z,1510152990.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:30.619Z,1510152990.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:30.635Z,1510152990.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T14:56:30.636Z,1510152990.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:31.037Z,1510152991.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:31.068Z,1510152991.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T14:56:31.069Z,1510152991.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:31.418Z,1510152991.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:31.439Z,1510152991.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T14:56:31.440Z,1510152991.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:31.815Z,1510152991.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:31.850Z,1510152991.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T14:56:31.851Z,1510152991.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:32.214Z,1510152992.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:32.230Z,1510152992.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T14:56:32.231Z,1510152992.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:32.627Z,1510152992.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:32.643Z,1510152992.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T14:56:32.644Z,1510152992.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:33.309Z,1510152993.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:33.324Z,1510152993.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T14:56:33.325Z,1510152993.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:33.441Z,1510152993.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:33.483Z,1510152993.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T14:56:33.484Z,1510152993.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:33.867Z,1510152993.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:33.883Z,1510152993.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T14:56:33.885Z,1510152993.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:34.264Z,1510152994.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:34.279Z,1510152994.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T14:56:34.280Z,1510152994.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:34.665Z,1510152994.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:34.681Z,1510152994.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T14:56:34.682Z,1510152994.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:35.047Z,1510152995.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:35.082Z,1510152995.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T14:56:35.083Z,1510152995.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:35.447Z,1510152995.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:35.477Z,1510152995.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T14:56:35.478Z,1510152995.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:35.848Z,1510152995.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:35.876Z,1510152995.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T14:56:35.881Z,1510152995.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:36.277Z,1510152996.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:36.292Z,1510152996.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T14:56:36.293Z,1510152996.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:36.643Z,1510152996.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:36.658Z,1510152996.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-08T14:56:36.659Z,1510152996.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:37.057Z,1510152997.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:37.122Z,1510152997.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:37.738Z,1510152997.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:37.754Z,1510152997.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:37.878Z,1510152997.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:37.912Z,1510152997.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:38.287Z,1510152998.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:38.308Z,1510152998.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:38.687Z,1510152998.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:38.708Z,1510152998.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:39.084Z,1510152999.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:39.101Z,1510152999.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:39.474Z,1510152999.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:39.490Z,1510152999.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:39.864Z,1510152999.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:39.901Z,1510152999.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:40.290Z,1510153000.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:40.307Z,1510153000.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:40.667Z,1510153000.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:40.693Z,1510153000.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:41.067Z,1510153001.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:41.096Z,1510153001.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:41.484Z,1510153001.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:41.500Z,1510153001.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:42.194Z,1510153002.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:42.210Z,1510153002.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:42.342Z,1510153002.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:42.383Z,1510153002.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:42.754Z,1510153002.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:42.789Z,1510153002.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:43.154Z,1510153003.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:43.191Z,1510153003.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:43.554Z,1510153003.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:43.587Z,1510153003.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:43.942Z,1510153003.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:43.959Z,1510153003.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:44.342Z,1510153004.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:44.358Z,1510153004.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:44.743Z,1510153004.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:44.764Z,1510153004.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:45.166Z,1510153005.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:45.196Z,1510153005.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:45.553Z,1510153005.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:45.570Z,1510153005.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:46.233Z,1510153006.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:46.249Z,1510153006.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:46.363Z,1510153006.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:46.400Z,1510153006.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:46.784Z,1510153006.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:46.801Z,1510153006.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:47.180Z,1510153007.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:47.197Z,1510153007.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:47.574Z,1510153007.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:47.608Z,1510153007.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:47.963Z,1510153007.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:48.020Z,1510153008.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:48.359Z,1510153008.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:48.396Z,1510153008.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:48.764Z,1510153008.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:48.780Z,1510153008.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:49.196Z,1510153009.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:49.213Z,1510153009.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:49.577Z,1510153009.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:49.631Z,1510153009.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:50.255Z,1510153010.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:50.271Z,1510153010.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:50.369Z,1510153010.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:50.419Z,1510153010.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:50.795Z,1510153010.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:50.853Z,1510153010.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:51.195Z,1510153011.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:51.211Z,1510153011.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:51.593Z,1510153011.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:51.655Z,1510153011.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:51.975Z,1510153011.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:52.010Z,1510153012.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:52.375Z,1510153012.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:52.412Z,1510153012.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:52.772Z,1510153012.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:52.796Z,1510153012.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:53.209Z,1510153013.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:53.233Z,1510153013.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:53.575Z,1510153013.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:53.612Z,1510153013.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:53.985Z,1510153013.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:54.019Z,1510153014.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:54.675Z,1510153014.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:54.707Z,1510153014.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:54.823Z,1510153014.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:54.871Z,1510153014.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:55.252Z,1510153015.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:55.269Z,1510153015.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:55.648Z,1510153015.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:55.669Z,1510153015.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:56.033Z,1510153016.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:56.060Z,1510153016.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:56.428Z,1510153016.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:56.464Z,1510153016.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:56.828Z,1510153016.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:56.861Z,1510153016.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:57.261Z,1510153017.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:57.279Z,1510153017.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:57.641Z,1510153017.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:57.683Z,1510153017.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:58.314Z,1510153018.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:58.330Z,1510153018.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:58.429Z,1510153018.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:58.479Z,1510153018.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:58.856Z,1510153018.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:58.876Z,1510153018.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:59.254Z,1510153019.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:59.270Z,1510153019.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:56:59.652Z,1510153019.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:56:59.708Z,1510153019.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:00.039Z,1510153020.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:00.068Z,1510153020.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:00.439Z,1510153020.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:00.468Z,1510153020.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:00.836Z,1510153020.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:00.869Z,1510153020.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:01.267Z,1510153021.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:01.290Z,1510153021.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:01.659Z,1510153021.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:01.680Z,1510153021.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:02.322Z,1510153022.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:02.339Z,1510153022.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:02.470Z,1510153022.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:02.515Z,1510153022.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:02.879Z,1510153022.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:02.912Z,1510153022.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:03.276Z,1510153023.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:03.292Z,1510153023.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:03.678Z,1510153023.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:03.715Z,1510153023.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:04.064Z,1510153024.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:04.108Z,1510153024.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:04.464Z,1510153024.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:04.483Z,1510153024.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:04.866Z,1510153024.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:04.885Z,1510153024.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:05.290Z,1510153025.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:05.316Z,1510153025.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:05.673Z,1510153025.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:05.716Z,1510153025.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:06.348Z,1510153026.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:06.365Z,1510153026.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:06.481Z,1510153026.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:06.518Z,1510153026.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:06.894Z,1510153026.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:06.923Z,1510153026.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:07.291Z,1510153027.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:07.318Z,1510153027.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:07.696Z,1510153027.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:07.727Z,1510153027.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:08.081Z,1510153028.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:08.114Z,1510153028.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:08.484Z,1510153028.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:08.500Z,1510153028.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:08.880Z,1510153028.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:08.923Z,1510153028.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:09.308Z,1510153029.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:09.315Z,1510153029.315 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-11-08T14:57:09.343Z,1510153029.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:09.678Z,1510153029.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:09.694Z,1510153029.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:10.093Z,1510153030.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:10.148Z,1510153030.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:10.790Z,1510153030.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:10.818Z,1510153030.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:10.935Z,1510153030.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:10.952Z,1510153030.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:11.350Z,1510153031.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:11.376Z,1510153031.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:11.753Z,1510153031.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:11.797Z,1510153031.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:12.149Z,1510153032.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:12.175Z,1510153032.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:12.539Z,1510153032.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:12.580Z,1510153032.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:12.940Z,1510153032.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:12.995Z,1510153032.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:13.371Z,1510153033.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:13.387Z,1510153033.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:13.749Z,1510153033.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:13.803Z,1510153033.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:14.420Z,1510153034.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:14.436Z,1510153034.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:14.549Z,1510153034.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:14.581Z,1510153034.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:14.976Z,1510153034.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:14.992Z,1510153034.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:15.372Z,1510153035.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:15.387Z,1510153035.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:15.773Z,1510153035.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:15.789Z,1510153035.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:16.155Z,1510153036.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:16.181Z,1510153036.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:16.551Z,1510153036.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:16.582Z,1510153036.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:16.952Z,1510153036.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:16.985Z,1510153036.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:17.387Z,1510153037.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:17.403Z,1510153037.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:17.751Z,1510153037.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:17.783Z,1510153037.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:18.174Z,1510153038.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:18.191Z,1510153038.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:18.846Z,1510153038.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:18.862Z,1510153038.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:18.999Z,1510153038.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:19.031Z,1510153039.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:19.413Z,1510153039.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:19.439Z,1510153039.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:19.814Z,1510153039.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:19.844Z,1510153039.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:20.205Z,1510153040.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:20.230Z,1510153040.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:20.600Z,1510153040.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:20.615Z,1510153040.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:21.032Z,1510153041.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:21.048Z,1510153041.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:21.409Z,1510153041.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:21.434Z,1510153041.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:22.118Z,1510153042.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:22.190Z,1510153042.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:22.296Z,1510153042.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:22.321Z,1510153042.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:22.710Z,1510153042.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:22.742Z,1510153042.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:23.109Z,1510153043.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:23.125Z,1510153043.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:23.510Z,1510153043.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:23.526Z,1510153043.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:23.898Z,1510153043.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:23.915Z,1510153043.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:24.297Z,1510153044.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:24.313Z,1510153044.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:24.699Z,1510153044.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:24.716Z,1510153044.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:25.122Z,1510153045.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:25.146Z,1510153045.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:25.509Z,1510153045.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:25.525Z,1510153045.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:26.185Z,1510153046.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:26.202Z,1510153046.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:26.311Z,1510153046.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:26.355Z,1510153046.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:26.721Z,1510153046.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:26.755Z,1510153046.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:27.122Z,1510153047.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:27.154Z,1510153047.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:27.522Z,1510153047.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:27.547Z,1510153047.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:27.911Z,1510153047.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:27.927Z,1510153047.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:28.307Z,1510153048.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:28.324Z,1510153048.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:28.713Z,1510153048.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:28.741Z,1510153048.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:29.141Z,1510153049.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:29.157Z,1510153049.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:29.526Z,1510153049.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:29.551Z,1510153049.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:30.205Z,1510153050.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:30.227Z,1510153050.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:30.359Z,1510153050.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:30.399Z,1510153050.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:30.770Z,1510153050.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:30.800Z,1510153050.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:31.169Z,1510153051.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:31.199Z,1510153051.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:31.569Z,1510153051.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:31.601Z,1510153051.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:31.958Z,1510153051.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:31.975Z,1510153051.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:32.358Z,1510153052.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:32.374Z,1510153052.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:32.760Z,1510153052.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:32.777Z,1510153052.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:33.186Z,1510153053.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:33.227Z,1510153053.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:33.558Z,1510153053.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:33.573Z,1510153053.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:33.966Z,1510153053.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:34.119Z,1510153054.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:35.077Z,1510153055.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:35.100Z,1510153055.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:35.213Z,1510153055.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:35.264Z,1510153055.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:35.640Z,1510153055.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:35.657Z,1510153055.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:36.029Z,1510153056.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:36.080Z,1510153056.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:36.441Z,1510153056.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:36.457Z,1510153056.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:36.820Z,1510153056.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:36.869Z,1510153056.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:37.220Z,1510153057.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:37.254Z,1510153057.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:37.619Z,1510153057.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:37.651Z,1510153057.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:38.052Z,1510153058.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:38.068Z,1510153058.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:38.433Z,1510153058.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:38.458Z,1510153058.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:39.241Z,1510153059.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:39.257Z,1510153059.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:39.372Z,1510153059.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:39.404Z,1510153059.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:39.786Z,1510153059.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:39.817Z,1510153059.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:40.186Z,1510153060.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:40.213Z,1510153060.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:40.582Z,1510153060.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:40.608Z,1510153060.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:40.973Z,1510153060.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:40.988Z,1510153060.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:41.372Z,1510153061.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:41.389Z,1510153061.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:41.777Z,1510153061.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:41.793Z,1510153061.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:42.203Z,1510153062.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:42.219Z,1510153062.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:42.582Z,1510153062.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:42.606Z,1510153062.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:43.263Z,1510153063.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:43.283Z,1510153063.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:43.395Z,1510153063.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:43.426Z,1510153063.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:43.821Z,1510153063.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:43.837Z,1510153063.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:44.218Z,1510153064.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:44.253Z,1510153064.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:44.612Z,1510153064.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:44.629Z,1510153064.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:44.999Z,1510153064.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:45.049Z,1510153065.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:45.399Z,1510153065.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:45.426Z,1510153065.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:45.799Z,1510153065.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:45.826Z,1510153065.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:46.227Z,1510153066.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:46.247Z,1510153066.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:46.616Z,1510153066.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:46.636Z,1510153066.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:47.273Z,1510153067.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:47.293Z,1510153067.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:47.428Z,1510153067.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:47.445Z,1510153067.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:47.830Z,1510153067.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:47.847Z,1510153067.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:48.226Z,1510153068.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:48.243Z,1510153068.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:48.629Z,1510153068.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:48.651Z,1510153068.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:49.022Z,1510153069.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:49.038Z,1510153069.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:49.417Z,1510153069.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:49.434Z,1510153069.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:49.823Z,1510153069.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:49.838Z,1510153069.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:50.239Z,1510153070.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:50.272Z,1510153070.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:50.621Z,1510153070.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:50.638Z,1510153070.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:51.029Z,1510153071.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:51.045Z,1510153071.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:51.708Z,1510153071.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:51.725Z,1510153071.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:51.841Z,1510153071.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:51.883Z,1510153071.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:52.268Z,1510153072.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:52.285Z,1510153072.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:52.667Z,1510153072.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:52.684Z,1510153072.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:53.064Z,1510153073.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:53.081Z,1510153073.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:53.448Z,1510153073.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:53.478Z,1510153073.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:53.844Z,1510153073.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:53.877Z,1510153073.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:54.275Z,1510153074.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:54.291Z,1510153074.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:54.669Z,1510153074.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:54.685Z,1510153074.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:55.341Z,1510153075.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:55.358Z,1510153075.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:55.495Z,1510153075.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:55.531Z,1510153075.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:55.897Z,1510153075.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:55.951Z,1510153075.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:56.302Z,1510153076.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:56.326Z,1510153076.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:56.701Z,1510153076.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:56.728Z,1510153076.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:57.087Z,1510153077.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:57.103Z,1510153077.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:57.486Z,1510153077.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:57.562Z,1510153077.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:57.888Z,1510153077.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:57.904Z,1510153077.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:58.324Z,1510153078.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:58.377Z,1510153078.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:58.687Z,1510153078.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:58.707Z,1510153078.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:59.101Z,1510153079.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:59.152Z,1510153079.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:59.777Z,1510153079.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:59.793Z,1510153079.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:57:59.901Z,1510153079.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:57:59.939Z,1510153079.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:00.323Z,1510153080.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:00.347Z,1510153080.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:00.724Z,1510153080.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:00.740Z,1510153080.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:01.123Z,1510153081.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:01.139Z,1510153081.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:01.507Z,1510153081.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:01.532Z,1510153081.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:01.908Z,1510153081.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:01.933Z,1510153081.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:02.335Z,1510153082.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:02.356Z,1510153082.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:02.727Z,1510153082.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:02.744Z,1510153082.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:03.428Z,1510153083.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:03.445Z,1510153083.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:03.545Z,1510153083.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:03.595Z,1510153083.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:03.962Z,1510153083.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:03.994Z,1510153083.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:04.372Z,1510153084.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:04.388Z,1510153084.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:04.762Z,1510153084.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:04.795Z,1510153084.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:05.151Z,1510153085.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:05.185Z,1510153085.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:05.547Z,1510153085.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:05.563Z,1510153085.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:05.948Z,1510153085.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:05.964Z,1510153085.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:06.379Z,1510153086.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:06.395Z,1510153086.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:06.747Z,1510153086.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:06.763Z,1510153086.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:07.165Z,1510153087.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:07.231Z,1510153087.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:07.841Z,1510153087.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:07.857Z,1510153087.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:07.953Z,1510153087.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:07.995Z,1510153087.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:08.379Z,1510153088.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:08.395Z,1510153088.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:08.779Z,1510153088.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:08.799Z,1510153088.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:09.180Z,1510153089.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:09.197Z,1510153089.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:09.559Z,1510153089.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:09.590Z,1510153089.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:09.987Z,1510153089.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:10.007Z,1510153090.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:10.377Z,1510153090.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:10.394Z,1510153090.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:11.054Z,1510153091.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:11.086Z,1510153091.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:11.201Z,1510153091.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:11.246Z,1510153091.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:11.628Z,1510153091.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:11.644Z,1510153091.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:12.028Z,1510153092.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:12.044Z,1510153092.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:12.413Z,1510153092.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:12.446Z,1510153092.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:12.807Z,1510153092.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:12.838Z,1510153092.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:13.207Z,1510153093.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:13.238Z,1510153093.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:13.604Z,1510153093.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:13.636Z,1510153093.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:14.040Z,1510153094.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:14.057Z,1510153094.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:14.408Z,1510153094.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:14.440Z,1510153094.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:14.821Z,1510153094.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:14.855Z,1510153094.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:15.503Z,1510153095.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:15.519Z,1510153095.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:15.654Z,1510153095.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:15.695Z,1510153095.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:16.062Z,1510153096.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:16.099Z,1510153096.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:16.461Z,1510153096.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:16.505Z,1510153096.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:16.862Z,1510153096.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:16.894Z,1510153096.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:17.250Z,1510153097.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:17.271Z,1510153097.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:17.651Z,1510153097.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:17.711Z,1510153097.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:18.074Z,1510153098.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:18.107Z,1510153098.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:18.461Z,1510153098.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:18.499Z,1510153098.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:19.137Z,1510153099.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:19.143Z,1510153099.143 [PNI_TCM](ERROR): CRC does not match. Expected:0x44701 got:0x42434
2017-11-08T14:58:19.171Z,1510153099.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:19.310Z,1510153099.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:19.365Z,1510153099.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:19.718Z,1510153099.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:19.746Z,1510153099.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:20.113Z,1510153100.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:20.144Z,1510153100.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:20.514Z,1510153100.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:20.564Z,1510153100.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:20.907Z,1510153100.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:20.923Z,1510153100.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:21.307Z,1510153101.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:21.349Z,1510153101.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:21.706Z,1510153101.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:21.722Z,1510153101.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:22.121Z,1510153102.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:22.150Z,1510153102.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:22.506Z,1510153102.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:22.521Z,1510153102.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:22.917Z,1510153102.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:22.952Z,1510153102.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:23.593Z,1510153103.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:23.609Z,1510153103.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:23.721Z,1510153103.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:23.749Z,1510153103.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:24.148Z,1510153104.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:24.164Z,1510153104.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:24.544Z,1510153104.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:24.560Z,1510153104.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:24.945Z,1510153104.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:24.961Z,1510153104.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:25.327Z,1510153105.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:25.358Z,1510153105.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:25.727Z,1510153105.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:25.757Z,1510153105.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:26.159Z,1510153106.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:26.176Z,1510153106.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:26.547Z,1510153106.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:26.564Z,1510153106.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:27.210Z,1510153107.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:27.226Z,1510153107.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:27.364Z,1510153107.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:27.380Z,1510153107.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:27.782Z,1510153107.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:27.807Z,1510153107.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:28.182Z,1510153108.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:28.207Z,1510153108.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:28.574Z,1510153108.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:28.602Z,1510153108.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:28.966Z,1510153108.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:28.983Z,1510153108.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:29.365Z,1510153109.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:29.412Z,1510153109.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:29.766Z,1510153109.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:29.784Z,1510153109.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:30.190Z,1510153110.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:30.213Z,1510153110.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:30.566Z,1510153110.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:30.582Z,1510153110.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:30.978Z,1510153110.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:31.010Z,1510153111.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:31.679Z,1510153111.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:31.717Z,1510153111.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:31.831Z,1510153111.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:31.871Z,1510153111.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:32.253Z,1510153112.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:32.269Z,1510153112.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:32.642Z,1510153112.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:32.675Z,1510153112.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:33.042Z,1510153113.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:33.071Z,1510153113.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:33.431Z,1510153113.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:33.460Z,1510153113.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:33.832Z,1510153113.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:33.870Z,1510153113.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:34.259Z,1510153114.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:34.280Z,1510153114.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:34.646Z,1510153114.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:34.688Z,1510153114.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:35.321Z,1510153115.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:35.337Z,1510153115.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:35.467Z,1510153115.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:35.508Z,1510153115.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:35.877Z,1510153115.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:35.893Z,1510153115.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:36.278Z,1510153116.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:36.294Z,1510153116.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:36.673Z,1510153116.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:36.690Z,1510153116.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:37.068Z,1510153117.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:37.096Z,1510153117.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:37.469Z,1510153117.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:37.485Z,1510153117.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:37.870Z,1510153117.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:37.886Z,1510153117.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:38.289Z,1510153118.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:38.305Z,1510153118.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:38.669Z,1510153118.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:38.685Z,1510153118.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:39.079Z,1510153119.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:39.100Z,1510153119.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:39.760Z,1510153119.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:39.777Z,1510153119.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:39.889Z,1510153119.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:39.939Z,1510153119.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:40.306Z,1510153120.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:40.339Z,1510153120.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:40.705Z,1510153120.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:40.730Z,1510153120.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:41.106Z,1510153121.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:41.138Z,1510153121.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:41.491Z,1510153121.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:41.532Z,1510153121.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:41.892Z,1510153121.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:41.908Z,1510153121.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:42.322Z,1510153122.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:42.339Z,1510153122.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:42.709Z,1510153122.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:42.742Z,1510153122.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:43.425Z,1510153123.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:43.447Z,1510153123.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:43.551Z,1510153123.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:43.583Z,1510153123.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:43.971Z,1510153123.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:43.992Z,1510153123.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:44.369Z,1510153124.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:44.384Z,1510153124.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:44.768Z,1510153124.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:44.776Z,1510153124.776 [BPC1](ERROR): Failed to receive battery data
2017-11-08T14:58:44.776Z,1510153124.776 [BPC1] Communications Fault, FailCount= 1
2017-11-08T14:58:44.776Z,1510153124.776 [BPC1](ERROR): Communications Fault
2017-11-08T14:58:44.786Z,1510153124.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:44.865Z,1510153124.865 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T14:58:45.155Z,1510153125.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:45.184Z,1510153125.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:45.551Z,1510153125.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:45.567Z,1510153125.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:45.952Z,1510153125.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:45.969Z,1510153125.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:46.062Z,1510153126.062 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T14:58:46.062Z,1510153126.062 [BPC1] No Fault, FailCount= 1
2017-11-08T14:58:46.380Z,1510153126.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:46.459Z,1510153126.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:46.751Z,1510153126.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:46.767Z,1510153126.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:47.166Z,1510153127.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:47.192Z,1510153127.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:47.841Z,1510153127.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:47.857Z,1510153127.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:47.957Z,1510153127.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:48.008Z,1510153128.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:48.383Z,1510153128.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:48.400Z,1510153128.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:48.783Z,1510153128.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:48.803Z,1510153128.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:49.181Z,1510153129.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:49.203Z,1510153129.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:49.563Z,1510153129.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:49.598Z,1510153129.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:49.994Z,1510153129.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:50.010Z,1510153130.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:50.381Z,1510153130.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:50.397Z,1510153130.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:51.059Z,1510153131.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:51.090Z,1510153131.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:51.207Z,1510153131.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:51.251Z,1510153131.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:51.629Z,1510153131.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:51.645Z,1510153131.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:52.017Z,1510153132.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:52.044Z,1510153132.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:52.417Z,1510153132.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:52.443Z,1510153132.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:52.807Z,1510153132.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:52.844Z,1510153132.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:53.207Z,1510153133.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:53.242Z,1510153133.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:53.604Z,1510153133.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:53.620Z,1510153133.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:54.040Z,1510153134.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:54.055Z,1510153134.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:54.407Z,1510153134.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:54.449Z,1510153134.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:54.817Z,1510153134.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:54.872Z,1510153134.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:55.495Z,1510153135.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:55.516Z,1510153135.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:55.651Z,1510153135.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:55.695Z,1510153135.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:56.058Z,1510153136.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:56.096Z,1510153136.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:56.453Z,1510153136.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:56.496Z,1510153136.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:56.858Z,1510153136.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:56.897Z,1510153136.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:57.246Z,1510153137.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:57.267Z,1510153137.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:57.646Z,1510153137.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:57.667Z,1510153137.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:58.070Z,1510153138.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:58.097Z,1510153138.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:58.457Z,1510153138.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:58.497Z,1510153138.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:59.133Z,1510153139.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:59.149Z,1510153139.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:59.255Z,1510153139.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:59.305Z,1510153139.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:58:59.674Z,1510153139.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:58:59.702Z,1510153139.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:00.071Z,1510153140.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:00.098Z,1510153140.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:00.475Z,1510153140.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:00.514Z,1510153140.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:00.860Z,1510153140.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:00.905Z,1510153140.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:01.259Z,1510153141.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:01.275Z,1510153141.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:01.661Z,1510153141.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:01.693Z,1510153141.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:02.088Z,1510153142.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:02.105Z,1510153142.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:02.463Z,1510153142.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:02.505Z,1510153142.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:02.870Z,1510153142.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:02.906Z,1510153142.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:03.554Z,1510153143.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:03.576Z,1510153143.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:03.711Z,1510153143.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:03.727Z,1510153143.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:04.126Z,1510153144.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:04.150Z,1510153144.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:04.529Z,1510153144.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:04.559Z,1510153144.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:04.921Z,1510153144.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:04.953Z,1510153144.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:05.310Z,1510153145.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:05.327Z,1510153145.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:05.713Z,1510153145.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:05.776Z,1510153145.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:06.143Z,1510153146.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:06.159Z,1510153146.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:06.522Z,1510153146.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:06.538Z,1510153146.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:07.193Z,1510153147.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:07.240Z,1510153147.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:07.376Z,1510153147.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:07.392Z,1510153147.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:07.786Z,1510153147.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:07.835Z,1510153147.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:08.186Z,1510153148.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:08.217Z,1510153148.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:08.582Z,1510153148.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:08.598Z,1510153148.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:08.979Z,1510153148.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:08.000Z,1510153149.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:09.374Z,1510153149.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:09.395Z,1510153149.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:09.775Z,1510153149.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:09.791Z,1510153149.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:10.207Z,1510153150.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:10.223Z,1510153150.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:10.578Z,1510153150.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:10.594Z,1510153150.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:10.981Z,1510153150.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:10.998Z,1510153150.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:11.670Z,1510153151.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:11.692Z,1510153151.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:11.826Z,1510153151.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:11.865Z,1510153151.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:12.237Z,1510153152.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:12.272Z,1510153152.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:12.637Z,1510153152.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:12.674Z,1510153152.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:13.037Z,1510153153.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:13.054Z,1510153153.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:13.428Z,1510153153.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:13.448Z,1510153153.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:13.830Z,1510153153.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:13.846Z,1510153153.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:14.241Z,1510153154.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:14.258Z,1510153154.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:14.639Z,1510153154.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:14.659Z,1510153154.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:15.310Z,1510153155.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:15.331Z,1510153155.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:15.444Z,1510153155.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:15.495Z,1510153155.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:15.865Z,1510153155.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:15.913Z,1510153155.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:16.265Z,1510153156.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:16.295Z,1510153156.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:16.658Z,1510153156.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:16.690Z,1510153156.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:17.052Z,1510153157.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:17.068Z,1510153157.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:17.452Z,1510153157.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:17.468Z,1510153157.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:17.848Z,1510153157.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:17.864Z,1510153157.864 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:17.865Z,1510153157.865 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2017-11-08T14:59:17.865Z,1510153157.865 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T14:59:17.866Z,1510153157.866 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:17.866Z,1510153157.866 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32
2017-11-08T14:59:17.867Z,1510153157.867 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T14:59:17.868Z,1510153157.868 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:17.868Z,1510153157.868 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 32
2017-11-08T14:59:17.869Z,1510153157.869 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T14:59:17.957Z,1510153157.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T14:59:17.957Z,1510153157.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T14:59:17.957Z,1510153157.957 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T14:59:18.287Z,1510153158.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:18.385Z,1510153158.385 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T14:59:18.385Z,1510153158.385 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2017-11-08T14:59:18.385Z,1510153158.385 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T14:59:18.385Z,1510153158.385 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32
2017-11-08T14:59:18.386Z,1510153158.386 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T14:59:18.386Z,1510153158.386 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 32
2017-11-08T14:59:18.654Z,1510153158.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:18.670Z,1510153158.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T14:59:18.670Z,1510153158.670 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:59:18.670Z,1510153158.670 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:59:18.671Z,1510153158.671 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T14:59:18.671Z,1510153158.671 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:59:18.671Z,1510153158.671 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:59:18.672Z,1510153158.672 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T14:59:18.672Z,1510153158.672 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T14:59:18.673Z,1510153158.673 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T14:59:19.061Z,1510153159.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:19.077Z,1510153159.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T14:59:19.078Z,1510153159.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:19.741Z,1510153159.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:19.763Z,1510153159.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2017-11-08T14:59:19.764Z,1510153159.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:19.875Z,1510153159.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:19.907Z,1510153159.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T14:59:19.908Z,1510153159.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:20.292Z,1510153160.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:20.308Z,1510153160.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T14:59:20.309Z,1510153160.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:20.693Z,1510153160.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:20.708Z,1510153160.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T14:59:20.709Z,1510153160.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:21.092Z,1510153161.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:21.107Z,1510153161.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T14:59:21.108Z,1510153161.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:21.475Z,1510153161.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:21.510Z,1510153161.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T14:59:21.511Z,1510153161.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:21.872Z,1510153161.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:21.907Z,1510153161.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T14:59:21.908Z,1510153161.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:22.304Z,1510153162.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:22.319Z,1510153162.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-08T14:59:22.321Z,1510153162.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:22.696Z,1510153162.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:22.713Z,1510153162.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T14:59:22.714Z,1510153162.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:23.404Z,1510153163.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:23.420Z,1510153163.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T14:59:23.421Z,1510153163.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:23.528Z,1510153163.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:23.567Z,1510153163.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-08T14:59:23.568Z,1510153163.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:23.934Z,1510153163.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:23.966Z,1510153163.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-08T14:59:23.967Z,1510153163.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:24.337Z,1510153164.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:24.364Z,1510153164.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-08T14:59:24.365Z,1510153164.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:24.738Z,1510153164.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:24.763Z,1510153164.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T14:59:24.764Z,1510153164.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:25.123Z,1510153165.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:25.139Z,1510153165.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-08T14:59:25.140Z,1510153165.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:25.522Z,1510153165.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:25.543Z,1510153165.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T14:59:25.544Z,1510153165.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:25.923Z,1510153165.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:25.943Z,1510153165.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T14:59:25.944Z,1510153165.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:26.356Z,1510153166.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:26.371Z,1510153166.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T14:59:26.373Z,1510153166.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:26.727Z,1510153166.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:26.776Z,1510153166.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T14:59:26.777Z,1510153166.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:27.137Z,1510153167.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:27.172Z,1510153167.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T14:59:27.173Z,1510153167.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:27.816Z,1510153167.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:27.839Z,1510153167.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T14:59:27.840Z,1510153167.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:27.947Z,1510153167.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:28.034Z,1510153168.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2017-11-08T14:59:28.035Z,1510153168.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:28.367Z,1510153168.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:28.383Z,1510153168.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T14:59:28.384Z,1510153168.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:28.758Z,1510153168.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:28.824Z,1510153168.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2017-11-08T14:59:28.825Z,1510153168.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:29.157Z,1510153169.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:29.322Z,1510153169.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2017-11-08T14:59:29.362Z,1510153169.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:29.545Z,1510153169.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:29.606Z,1510153169.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T14:59:29.607Z,1510153169.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:29.950Z,1510153169.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:30.003Z,1510153170.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T14:59:30.004Z,1510153170.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:30.373Z,1510153170.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:30.389Z,1510153170.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T14:59:30.390Z,1510153170.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:30.762Z,1510153170.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:30.793Z,1510153170.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T14:59:30.794Z,1510153170.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:31.429Z,1510153171.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:31.444Z,1510153171.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T14:59:31.446Z,1510153171.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:31.545Z,1510153171.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:31.596Z,1510153171.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T14:59:31.597Z,1510153171.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:31.972Z,1510153171.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:31.988Z,1510153171.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T14:59:31.989Z,1510153171.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:32.372Z,1510153172.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:32.391Z,1510153172.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T14:59:32.392Z,1510153172.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:32.761Z,1510153172.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:32.794Z,1510153172.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T14:59:32.795Z,1510153172.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:33.155Z,1510153173.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:33.186Z,1510153173.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T14:59:33.186Z,1510153173.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:33.552Z,1510153173.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:33.587Z,1510153173.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T14:59:33.588Z,1510153173.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:33.980Z,1510153173.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:33.996Z,1510153173.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T14:59:33.997Z,1510153173.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:34.351Z,1510153174.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:34.375Z,1510153174.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T14:59:34.376Z,1510153174.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:34.751Z,1510153174.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:34.799Z,1510153174.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T14:59:34.800Z,1510153174.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:35.165Z,1510153175.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:35.191Z,1510153175.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T14:59:35.192Z,1510153175.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:35.842Z,1510153175.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:35.858Z,1510153175.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T14:59:35.859Z,1510153175.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:35.983Z,1510153175.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:36.015Z,1510153176.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-08T14:59:36.016Z,1510153176.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:36.393Z,1510153176.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:36.415Z,1510153176.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-08T14:59:36.416Z,1510153176.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:36.794Z,1510153176.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:36.809Z,1510153176.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T14:59:36.810Z,1510153176.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:37.190Z,1510153177.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:37.206Z,1510153177.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T14:59:37.207Z,1510153177.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:37.582Z,1510153177.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:37.636Z,1510153177.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-08T14:59:37.637Z,1510153177.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:38.006Z,1510153178.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:38.034Z,1510153178.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:38.393Z,1510153178.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:38.409Z,1510153178.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:39.062Z,1510153179.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:39.084Z,1510153179.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:39.203Z,1510153179.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:39.240Z,1510153179.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:39.614Z,1510153179.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:39.646Z,1510153179.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:40.013Z,1510153180.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:40.039Z,1510153180.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:40.424Z,1510153180.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:40.440Z,1510153180.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:40.803Z,1510153180.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:40.837Z,1510153180.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:41.199Z,1510153181.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:41.215Z,1510153181.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:41.604Z,1510153181.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:41.638Z,1510153181.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:42.031Z,1510153182.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:42.051Z,1510153182.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:42.403Z,1510153182.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:42.440Z,1510153182.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:42.824Z,1510153182.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:42.841Z,1510153182.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:43.494Z,1510153183.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:43.510Z,1510153183.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:43.647Z,1510153183.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:43.694Z,1510153183.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:44.066Z,1510153184.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:44.103Z,1510153184.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:44.465Z,1510153184.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:44.494Z,1510153184.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:44.866Z,1510153184.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:44.896Z,1510153184.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:45.251Z,1510153185.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:45.295Z,1510153185.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:45.652Z,1510153185.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:45.685Z,1510153185.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:46.078Z,1510153186.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:46.103Z,1510153186.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:46.466Z,1510153186.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:46.505Z,1510153186.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:47.174Z,1510153187.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:47.189Z,1510153187.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:47.309Z,1510153187.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:47.342Z,1510153187.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:47.732Z,1510153187.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:47.748Z,1510153187.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:48.127Z,1510153188.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:48.143Z,1510153188.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:48.525Z,1510153188.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:48.567Z,1510153188.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:48.909Z,1510153188.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:48.941Z,1510153188.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:49.311Z,1510153189.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:49.341Z,1510153189.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:49.708Z,1510153189.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:49.770Z,1510153189.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:50.140Z,1510153190.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:50.156Z,1510153190.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:50.506Z,1510153190.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:50.534Z,1510153190.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:50.933Z,1510153190.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:50.989Z,1510153190.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:51.598Z,1510153191.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:51.614Z,1510153191.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:51.723Z,1510153191.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:51.790Z,1510153191.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:52.147Z,1510153192.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:52.167Z,1510153192.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:52.546Z,1510153192.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:52.567Z,1510153192.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:52.935Z,1510153192.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:52.952Z,1510153192.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:53.323Z,1510153193.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:53.348Z,1510153193.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:53.724Z,1510153193.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:53.756Z,1510153193.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:54.147Z,1510153194.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:54.163Z,1510153194.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:54.545Z,1510153194.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:54.567Z,1510153194.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:55.214Z,1510153195.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:55.242Z,1510153195.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:55.354Z,1510153195.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:55.371Z,1510153195.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:55.774Z,1510153195.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:55.800Z,1510153195.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:56.174Z,1510153196.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:56.199Z,1510153196.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:56.570Z,1510153196.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:56.602Z,1510153196.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:56.959Z,1510153196.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:56.976Z,1510153196.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:57.359Z,1510153197.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:57.376Z,1510153197.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:57.759Z,1510153197.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:57.775Z,1510153197.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:58.191Z,1510153198.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:58.207Z,1510153198.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:58.562Z,1510153198.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:58.579Z,1510153198.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:58.970Z,1510153198.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:58.998Z,1510153198.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:59.637Z,1510153199.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:59.653Z,1510153199.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T14:59:59.763Z,1510153199.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T14:59:59.819Z,1510153199.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:00.182Z,1510153200.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:00.214Z,1510153200.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:00.582Z,1510153200.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:00.615Z,1510153200.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:00.993Z,1510153200.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:01.009Z,1510153201.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:01.372Z,1510153201.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:01.409Z,1510153201.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:01.770Z,1510153201.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:01.785Z,1510153201.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:02.199Z,1510153202.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:02.219Z,1510153202.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:02.582Z,1510153202.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:02.608Z,1510153202.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:03.247Z,1510153203.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:03.263Z,1510153203.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:03.380Z,1510153203.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:03.419Z,1510153203.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:03.801Z,1510153203.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:03.817Z,1510153203.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:04.197Z,1510153204.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:04.213Z,1510153204.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:04.598Z,1510153204.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:04.620Z,1510153204.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:04.980Z,1510153204.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:05.019Z,1510153205.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:05.380Z,1510153205.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:05.411Z,1510153205.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:05.785Z,1510153205.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:05.811Z,1510153205.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:06.212Z,1510153206.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:06.235Z,1510153206.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:06.580Z,1510153206.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:06.628Z,1510153206.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:07.005Z,1510153207.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:07.022Z,1510153207.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:07.679Z,1510153207.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:07.710Z,1510153207.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:07.828Z,1510153207.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:07.871Z,1510153207.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:08.248Z,1510153208.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:08.265Z,1510153208.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:08.649Z,1510153208.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:08.679Z,1510153208.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:09.049Z,1510153209.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:09.065Z,1510153209.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:09.428Z,1510153209.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:09.457Z,1510153209.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:09.828Z,1510153209.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:09.865Z,1510153209.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:10.261Z,1510153210.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:10.277Z,1510153210.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:10.638Z,1510153210.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:10.693Z,1510153210.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:11.314Z,1510153211.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:11.330Z,1510153211.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:11.433Z,1510153211.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:11.484Z,1510153211.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:11.857Z,1510153211.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:11.933Z,1510153211.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:12.256Z,1510153212.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:12.273Z,1510153212.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:12.660Z,1510153212.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:12.715Z,1510153212.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:13.035Z,1510153213.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:13.063Z,1510153213.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:13.439Z,1510153213.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:13.487Z,1510153213.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:13.840Z,1510153213.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:13.876Z,1510153213.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:14.271Z,1510153214.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:14.288Z,1510153214.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:14.639Z,1510153214.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:14.654Z,1510153214.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:15.053Z,1510153215.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:15.079Z,1510153215.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:15.734Z,1510153215.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:15.750Z,1510153215.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:15.887Z,1510153215.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:15.931Z,1510153215.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:16.298Z,1510153216.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:16.329Z,1510153216.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:16.697Z,1510153216.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:16.728Z,1510153216.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:17.093Z,1510153217.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:17.130Z,1510153217.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:17.483Z,1510153217.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:17.499Z,1510153217.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:17.883Z,1510153217.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:17.900Z,1510153217.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:18.297Z,1510153218.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:18.330Z,1510153218.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:18.697Z,1510153218.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:18.737Z,1510153218.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:19.417Z,1510153219.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:19.433Z,1510153219.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:19.540Z,1510153219.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:19.587Z,1510153219.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:19.966Z,1510153219.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:19.996Z,1510153219.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:20.362Z,1510153220.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:20.393Z,1510153220.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:20.754Z,1510153220.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:20.786Z,1510153220.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:21.147Z,1510153221.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:21.163Z,1510153221.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:21.547Z,1510153221.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:21.603Z,1510153221.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:21.944Z,1510153221.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:21.960Z,1510153221.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:22.377Z,1510153222.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:22.399Z,1510153222.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:22.747Z,1510153222.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:22.768Z,1510153222.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:23.165Z,1510153223.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:23.194Z,1510153223.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:23.835Z,1510153223.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:23.851Z,1510153223.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:23.958Z,1510153223.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:24.003Z,1510153224.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:24.384Z,1510153224.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:24.402Z,1510153224.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:24.772Z,1510153224.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:24.808Z,1510153224.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:25.184Z,1510153225.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:25.200Z,1510153225.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:25.565Z,1510153225.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:25.600Z,1510153225.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:25.993Z,1510153225.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:26.010Z,1510153226.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:26.374Z,1510153226.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:26.406Z,1510153226.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:27.058Z,1510153227.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:27.074Z,1510153227.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:27.207Z,1510153227.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:27.251Z,1510153227.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:27.626Z,1510153227.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:27.659Z,1510153227.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:28.025Z,1510153228.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:28.055Z,1510153228.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:28.425Z,1510153228.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:28.454Z,1510153228.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:28.811Z,1510153228.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:28.828Z,1510153228.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:29.208Z,1510153229.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:29.223Z,1510153229.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:29.613Z,1510153229.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:29.629Z,1510153229.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:30.047Z,1510153230.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:30.069Z,1510153230.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:30.415Z,1510153230.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:30.431Z,1510153230.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:30.829Z,1510153230.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:30.860Z,1510153230.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:31.510Z,1510153231.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:31.532Z,1510153231.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:31.670Z,1510153231.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:31.706Z,1510153231.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:32.078Z,1510153232.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:32.111Z,1510153232.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:32.475Z,1510153232.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:32.485Z,1510153232.485 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-08T15:00:32.535Z,1510153232.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:32.876Z,1510153232.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:32.909Z,1510153232.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:33.269Z,1510153233.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:33.285Z,1510153233.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:33.661Z,1510153233.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:33.731Z,1510153233.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:34.079Z,1510153234.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:34.113Z,1510153234.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:34.476Z,1510153234.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:34.520Z,1510153234.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:35.152Z,1510153235.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:35.169Z,1510153235.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:35.276Z,1510153235.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:35.339Z,1510153235.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:35.699Z,1510153235.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:35.722Z,1510153235.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:36.100Z,1510153236.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:36.117Z,1510153236.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:36.493Z,1510153236.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:36.517Z,1510153236.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:36.882Z,1510153236.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:36.918Z,1510153236.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:37.280Z,1510153237.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:37.289Z,1510153237.289 [PNI_TCM](ERROR): CRC does not match. Expected:0x54355 got:0x976
2017-11-08T15:00:37.331Z,1510153237.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:37.683Z,1510153237.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:37.707Z,1510153237.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:38.105Z,1510153238.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:38.133Z,1510153238.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:38.479Z,1510153238.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:38.519Z,1510153238.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:38.896Z,1510153238.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:38.902Z,1510153238.902 [PNI_TCM](ERROR): CRC does not match. Expected:0x56915 got:0x7361
2017-11-08T15:00:38.943Z,1510153238.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:39.565Z,1510153239.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:39.586Z,1510153239.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:39.700Z,1510153239.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:39.717Z,1510153239.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:40.114Z,1510153240.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:40.145Z,1510153240.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:40.518Z,1510153240.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:40.543Z,1510153240.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:40.910Z,1510153240.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:40.942Z,1510153240.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:41.303Z,1510153241.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:41.319Z,1510153241.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:41.701Z,1510153241.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:41.717Z,1510153241.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:42.130Z,1510153242.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:42.146Z,1510153242.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:42.513Z,1510153242.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:42.545Z,1510153242.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:43.184Z,1510153243.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:43.200Z,1510153243.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:43.322Z,1510153243.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:43.386Z,1510153243.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:43.743Z,1510153243.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:43.760Z,1510153243.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:44.147Z,1510153244.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:44.167Z,1510153244.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:44.543Z,1510153244.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:44.561Z,1510153244.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:44.931Z,1510153244.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:44.952Z,1510153244.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:45.334Z,1510153245.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:45.349Z,1510153245.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:45.734Z,1510153245.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:45.750Z,1510153245.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:46.150Z,1510153246.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:46.166Z,1510153246.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:46.523Z,1510153246.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:46.549Z,1510153246.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:46.944Z,1510153246.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:46.960Z,1510153246.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:47.622Z,1510153247.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:47.647Z,1510153247.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:47.757Z,1510153247.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:47.774Z,1510153247.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:48.142Z,1510153248.142 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T15:00:48.142Z,1510153248.142 [NAL9602] Data Fault, FailCount= 5
2017-11-08T15:00:48.142Z,1510153248.142 [NAL9602](ERROR): Data Fault
2017-11-08T15:00:48.160Z,1510153248.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:48.177Z,1510153248.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:48.273Z,1510153248.273 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T15:00:48.273Z,1510153248.273 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-11-08T15:00:48.546Z,1510153248.546 [NAL9602](INFO): Powering down
2017-11-08T15:00:48.564Z,1510153248.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:48.611Z,1510153248.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:48.695Z,1510153248.695 [CBIT](INFO): Critical error at 20171108T150048
2017-11-08T15:00:48.960Z,1510153248.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:48.977Z,1510153248.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:49.366Z,1510153249.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:49.382Z,1510153249.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:49.761Z,1510153249.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:49.778Z,1510153249.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:50.163Z,1510153250.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:50.179Z,1510153250.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:50.566Z,1510153250.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:50.583Z,1510153250.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:50.965Z,1510153250.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:50.982Z,1510153250.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:51.366Z,1510153251.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:51.383Z,1510153251.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:51.765Z,1510153251.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:51.782Z,1510153251.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:52.161Z,1510153252.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:52.178Z,1510153252.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:52.566Z,1510153252.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:52.584Z,1510153252.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:52.961Z,1510153252.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:52.978Z,1510153252.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:53.362Z,1510153253.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:53.378Z,1510153253.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:53.766Z,1510153253.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:53.783Z,1510153253.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:54.166Z,1510153254.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:54.231Z,1510153254.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:54.566Z,1510153254.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:54.582Z,1510153254.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:54.965Z,1510153254.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:54.983Z,1510153254.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:55.365Z,1510153255.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:55.433Z,1510153255.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:55.761Z,1510153255.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:55.778Z,1510153255.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:56.165Z,1510153256.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:56.183Z,1510153256.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:56.565Z,1510153256.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:56.612Z,1510153256.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:56.965Z,1510153256.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:56.981Z,1510153256.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:57.365Z,1510153257.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:57.419Z,1510153257.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:57.765Z,1510153257.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:57.782Z,1510153257.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:58.161Z,1510153258.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:58.177Z,1510153258.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:58.563Z,1510153258.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:58.580Z,1510153258.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:58.965Z,1510153258.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:58.981Z,1510153258.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:59.363Z,1510153259.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:59.383Z,1510153259.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:00:59.765Z,1510153259.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:00:59.782Z,1510153259.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:00.165Z,1510153260.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:00.181Z,1510153260.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:00.565Z,1510153260.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:00.581Z,1510153260.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:00.963Z,1510153260.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:00.980Z,1510153260.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:01.365Z,1510153261.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:01.381Z,1510153261.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:01.765Z,1510153261.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:01.781Z,1510153261.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:02.165Z,1510153262.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:02.182Z,1510153262.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:02.565Z,1510153262.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:02.581Z,1510153262.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:02.965Z,1510153262.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:02.981Z,1510153262.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:03.363Z,1510153263.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:03.381Z,1510153263.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:03.765Z,1510153263.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:03.782Z,1510153263.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:04.165Z,1510153264.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:04.182Z,1510153264.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:04.563Z,1510153264.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:04.581Z,1510153264.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:04.968Z,1510153264.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:04.984Z,1510153264.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:05.368Z,1510153265.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:05.384Z,1510153265.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:05.763Z,1510153265.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:05.819Z,1510153265.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:06.168Z,1510153266.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:06.184Z,1510153266.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:06.568Z,1510153266.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:06.585Z,1510153266.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:06.964Z,1510153266.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:06.981Z,1510153266.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:07.367Z,1510153267.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:07.387Z,1510153267.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:07.768Z,1510153267.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:07.784Z,1510153267.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:08.168Z,1510153268.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:08.185Z,1510153268.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:08.568Z,1510153268.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:08.584Z,1510153268.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:08.967Z,1510153268.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:08.984Z,1510153268.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:09.361Z,1510153269.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:09.386Z,1510153269.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:09.769Z,1510153269.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:09.785Z,1510153269.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:10.172Z,1510153270.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:10.189Z,1510153270.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:10.568Z,1510153270.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:10.585Z,1510153270.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:10.967Z,1510153270.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:11.000Z,1510153271.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:11.368Z,1510153271.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:11.385Z,1510153271.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:11.769Z,1510153271.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:11.822Z,1510153271.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:12.168Z,1510153272.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:12.184Z,1510153272.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:12.568Z,1510153272.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:12.585Z,1510153272.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:12.962Z,1510153272.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:12.994Z,1510153272.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:13.368Z,1510153273.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:13.384Z,1510153273.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:13.768Z,1510153273.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:13.785Z,1510153273.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:14.169Z,1510153274.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:14.186Z,1510153274.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:14.568Z,1510153274.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:14.585Z,1510153274.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:14.968Z,1510153274.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:14.986Z,1510153274.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:15.368Z,1510153275.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:15.386Z,1510153275.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:15.766Z,1510153275.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:15.794Z,1510153275.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:16.168Z,1510153276.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:16.185Z,1510153276.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:16.562Z,1510153276.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:16.593Z,1510153276.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:16.972Z,1510153276.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:16.988Z,1510153276.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:17.370Z,1510153277.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:17.391Z,1510153277.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:17.770Z,1510153277.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:17.839Z,1510153277.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:18.159Z,1510153278.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:18.191Z,1510153278.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:18.563Z,1510153278.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:18.590Z,1510153278.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:18.959Z,1510153278.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:19.100Z,1510153279.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:19.358Z,1510153279.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:19.376Z,1510153279.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:19.759Z,1510153279.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:19.885Z,1510153279.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:20.159Z,1510153280.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:20.205Z,1510153280.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:20.562Z,1510153280.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:20.595Z,1510153280.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:20.963Z,1510153280.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:20.989Z,1510153280.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:21.361Z,1510153281.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:21.389Z,1510153281.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:21.762Z,1510153281.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:21.788Z,1510153281.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:22.162Z,1510153282.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:22.189Z,1510153282.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:22.562Z,1510153282.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:22.589Z,1510153282.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:22.962Z,1510153282.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:22.996Z,1510153282.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:23.367Z,1510153283.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:23.399Z,1510153283.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:23.759Z,1510153283.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:23.795Z,1510153283.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:24.163Z,1510153284.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:24.189Z,1510153284.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:24.559Z,1510153284.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:24.587Z,1510153284.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:24.959Z,1510153284.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:24.984Z,1510153284.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:25.358Z,1510153285.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:25.376Z,1510153285.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:25.758Z,1510153285.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:25.776Z,1510153285.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:26.158Z,1510153286.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:26.176Z,1510153286.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:26.562Z,1510153286.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:26.579Z,1510153286.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:26.958Z,1510153286.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:26.975Z,1510153286.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:27.358Z,1510153287.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:27.375Z,1510153287.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:27.758Z,1510153287.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:27.775Z,1510153287.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:28.162Z,1510153288.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:28.220Z,1510153288.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:28.559Z,1510153288.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:28.576Z,1510153288.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:28.958Z,1510153288.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:28.975Z,1510153288.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:29.362Z,1510153289.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:29.379Z,1510153289.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:29.762Z,1510153289.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:29.780Z,1510153289.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:30.162Z,1510153290.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:30.179Z,1510153290.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:30.558Z,1510153290.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:30.575Z,1510153290.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:30.962Z,1510153290.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:30.980Z,1510153290.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:31.364Z,1510153291.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:31.381Z,1510153291.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:31.763Z,1510153291.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:31.780Z,1510153291.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:32.162Z,1510153292.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:32.179Z,1510153292.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:32.567Z,1510153292.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:32.583Z,1510153292.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:32.960Z,1510153292.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:32.976Z,1510153292.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:33.363Z,1510153293.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:33.380Z,1510153293.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:33.762Z,1510153293.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:33.783Z,1510153293.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:34.166Z,1510153294.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:34.183Z,1510153294.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:34.566Z,1510153294.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:34.584Z,1510153294.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:34.965Z,1510153294.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:34.982Z,1510153294.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:35.365Z,1510153295.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:35.382Z,1510153295.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:35.765Z,1510153295.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:35.788Z,1510153295.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:36.165Z,1510153296.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:36.181Z,1510153296.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:36.565Z,1510153296.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:36.582Z,1510153296.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:36.965Z,1510153296.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:36.983Z,1510153296.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:37.365Z,1510153297.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:37.381Z,1510153297.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:37.765Z,1510153297.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:37.782Z,1510153297.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:38.165Z,1510153298.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:38.182Z,1510153298.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:38.565Z,1510153298.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:38.581Z,1510153298.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:38.965Z,1510153298.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:38.982Z,1510153298.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:39.365Z,1510153299.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:39.382Z,1510153299.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:39.765Z,1510153299.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:39.831Z,1510153299.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:40.165Z,1510153300.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:40.217Z,1510153300.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:40.565Z,1510153300.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:40.582Z,1510153300.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:40.965Z,1510153300.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:41.017Z,1510153301.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:41.365Z,1510153301.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:41.381Z,1510153301.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:41.765Z,1510153301.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:41.824Z,1510153301.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:42.165Z,1510153302.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:42.182Z,1510153302.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:42.563Z,1510153302.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:42.580Z,1510153302.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:42.965Z,1510153302.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:42.982Z,1510153302.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:43.365Z,1510153303.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:43.381Z,1510153303.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:43.763Z,1510153303.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:43.779Z,1510153303.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:44.165Z,1510153304.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:44.182Z,1510153304.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:44.565Z,1510153304.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:44.581Z,1510153304.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:44.963Z,1510153304.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:44.979Z,1510153304.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:45.366Z,1510153305.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:45.383Z,1510153305.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:45.765Z,1510153305.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:45.781Z,1510153305.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:46.165Z,1510153306.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:46.181Z,1510153306.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:46.566Z,1510153306.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:46.587Z,1510153306.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:46.965Z,1510153306.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:46.981Z,1510153306.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:47.365Z,1510153307.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:47.381Z,1510153307.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:47.766Z,1510153307.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:47.787Z,1510153307.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:48.166Z,1510153308.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:48.187Z,1510153308.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:48.563Z,1510153308.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:48.579Z,1510153308.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:48.965Z,1510153308.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:48.987Z,1510153308.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:49.365Z,1510153309.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:49.387Z,1510153309.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:49.763Z,1510153309.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:49.779Z,1510153309.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:50.170Z,1510153310.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:50.224Z,1510153310.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:50.566Z,1510153310.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:50.583Z,1510153310.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:50.965Z,1510153310.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:50.982Z,1510153310.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:51.366Z,1510153311.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:51.383Z,1510153311.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:51.766Z,1510153311.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:51.783Z,1510153311.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:52.165Z,1510153312.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:52.182Z,1510153312.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:52.565Z,1510153312.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:52.584Z,1510153312.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:52.966Z,1510153312.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:52.983Z,1510153312.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:53.365Z,1510153313.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:53.382Z,1510153313.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:53.766Z,1510153313.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:53.783Z,1510153313.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:54.166Z,1510153314.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:54.183Z,1510153314.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:54.563Z,1510153314.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:54.580Z,1510153314.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:54.966Z,1510153314.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:54.983Z,1510153314.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:55.366Z,1510153315.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:55.383Z,1510153315.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:55.764Z,1510153315.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:55.781Z,1510153315.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:56.169Z,1510153316.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:56.186Z,1510153316.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:56.571Z,1510153316.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:56.587Z,1510153316.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:56.965Z,1510153316.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:56.982Z,1510153316.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:57.370Z,1510153317.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:57.391Z,1510153317.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:57.767Z,1510153317.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:57.788Z,1510153317.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:58.170Z,1510153318.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:58.186Z,1510153318.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:58.570Z,1510153318.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:58.586Z,1510153318.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:58.970Z,1510153318.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:58.987Z,1510153318.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:59.371Z,1510153319.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:59.387Z,1510153319.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:01:59.769Z,1510153319.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:01:59.787Z,1510153319.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:00.173Z,1510153320.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:00.191Z,1510153320.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:00.569Z,1510153320.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:00.586Z,1510153320.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:00.969Z,1510153320.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:00.987Z,1510153320.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:01.369Z,1510153321.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:01.386Z,1510153321.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:01.770Z,1510153321.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:01.786Z,1510153321.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:02.173Z,1510153322.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:02.250Z,1510153322.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:02.567Z,1510153322.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:02.628Z,1510153322.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:02.970Z,1510153322.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:02.986Z,1510153322.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:03.359Z,1510153323.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:03.397Z,1510153323.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:03.774Z,1510153323.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:03.830Z,1510153323.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:04.158Z,1510153324.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:04.185Z,1510153324.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:04.558Z,1510153324.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:04.611Z,1510153324.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:04.963Z,1510153324.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:04.989Z,1510153324.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:05.362Z,1510153325.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:05.389Z,1510153325.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:05.758Z,1510153325.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:05.799Z,1510153325.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:06.162Z,1510153326.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:06.189Z,1510153326.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:06.558Z,1510153326.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:06.591Z,1510153326.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:06.958Z,1510153326.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:06.991Z,1510153326.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:07.363Z,1510153327.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:07.394Z,1510153327.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:07.762Z,1510153327.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:07.794Z,1510153327.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:08.162Z,1510153328.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:08.195Z,1510153328.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:08.562Z,1510153328.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:08.594Z,1510153328.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:08.966Z,1510153328.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:08.992Z,1510153328.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:09.362Z,1510153329.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:09.399Z,1510153329.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:09.763Z,1510153329.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:09.796Z,1510153329.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:10.159Z,1510153330.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:10.175Z,1510153330.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:10.559Z,1510153330.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:10.576Z,1510153330.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:10.963Z,1510153330.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:11.002Z,1510153331.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:11.363Z,1510153331.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:11.379Z,1510153331.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:11.758Z,1510153331.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:11.776Z,1510153331.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:12.163Z,1510153332.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:12.180Z,1510153332.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:12.558Z,1510153332.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:12.576Z,1510153332.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:12.958Z,1510153332.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:13.014Z,1510153333.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:13.362Z,1510153333.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:13.378Z,1510153333.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:13.758Z,1510153333.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:13.776Z,1510153333.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:14.162Z,1510153334.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:14.179Z,1510153334.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:14.562Z,1510153334.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:14.578Z,1510153334.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:14.958Z,1510153334.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:14.976Z,1510153334.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:15.362Z,1510153335.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:15.379Z,1510153335.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:15.763Z,1510153335.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:15.784Z,1510153335.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:16.162Z,1510153336.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:16.179Z,1510153336.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:16.559Z,1510153336.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:16.576Z,1510153336.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:16.965Z,1510153336.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:16.987Z,1510153336.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:17.365Z,1510153337.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:17.381Z,1510153337.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:17.761Z,1510153337.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:17.778Z,1510153337.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:18.165Z,1510153338.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:18.187Z,1510153338.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:18.565Z,1510153338.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:18.581Z,1510153338.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:18.961Z,1510153338.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:18.978Z,1510153338.978 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:18.978Z,1510153338.978 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2017-11-08T15:02:18.978Z,1510153338.978 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T15:02:18.980Z,1510153338.980 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:18.980Z,1510153338.980 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33
2017-11-08T15:02:18.980Z,1510153338.980 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T15:02:18.982Z,1510153338.982 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:18.982Z,1510153338.982 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 33
2017-11-08T15:02:18.982Z,1510153338.982 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T15:02:19.069Z,1510153339.069 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T15:02:19.069Z,1510153339.069 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T15:02:19.070Z,1510153339.070 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T15:02:19.367Z,1510153339.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:19.465Z,1510153339.465 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T15:02:19.465Z,1510153339.465 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2017-11-08T15:02:19.466Z,1510153339.466 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T15:02:19.466Z,1510153339.466 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33
2017-11-08T15:02:19.466Z,1510153339.466 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T15:02:19.466Z,1510153339.466 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 33
2017-11-08T15:02:19.763Z,1510153339.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:19.786Z,1510153339.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T15:02:19.787Z,1510153339.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:02:19.787Z,1510153339.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:02:19.787Z,1510153339.787 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T15:02:19.788Z,1510153339.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:02:19.788Z,1510153339.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:02:19.788Z,1510153339.788 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T15:02:19.789Z,1510153339.789 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:02:19.789Z,1510153339.789 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:02:20.166Z,1510153340.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:20.182Z,1510153340.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T15:02:20.183Z,1510153340.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:20.567Z,1510153340.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:20.584Z,1510153340.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T15:02:20.585Z,1510153340.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:20.962Z,1510153340.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:20.989Z,1510153340.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T15:02:20.990Z,1510153340.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:21.368Z,1510153341.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:21.391Z,1510153341.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T15:02:21.392Z,1510153341.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:21.768Z,1510153341.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:21.785Z,1510153341.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T15:02:21.786Z,1510153341.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:22.164Z,1510153342.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:22.187Z,1510153342.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T15:02:22.188Z,1510153342.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:22.568Z,1510153342.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:22.585Z,1510153342.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T15:02:22.586Z,1510153342.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:22.967Z,1510153342.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:22.991Z,1510153342.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T15:02:22.992Z,1510153342.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:23.364Z,1510153343.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:23.380Z,1510153343.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T15:02:23.381Z,1510153343.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:23.763Z,1510153343.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:23.779Z,1510153343.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T15:02:23.780Z,1510153343.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:24.168Z,1510153344.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:24.177Z,1510153344.177 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-08T15:02:24.177Z,1510153344.177 [BPC1] Data Fault, FailCount= 1
2017-11-08T15:02:24.177Z,1510153344.177 [BPC1](ERROR): Data Fault
2017-11-08T15:02:24.186Z,1510153344.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T15:02:24.187Z,1510153344.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:24.261Z,1510153344.261 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T15:02:24.565Z,1510153344.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:24.587Z,1510153344.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T15:02:24.588Z,1510153344.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:24.965Z,1510153344.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:24.981Z,1510153344.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T15:02:24.982Z,1510153344.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:25.368Z,1510153345.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:25.384Z,1510153345.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T15:02:25.385Z,1510153345.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:25.465Z,1510153345.465 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T15:02:25.465Z,1510153345.465 [BPC1] No Fault, FailCount= 1
2017-11-08T15:02:25.764Z,1510153345.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:25.824Z,1510153345.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T15:02:25.825Z,1510153345.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:26.168Z,1510153346.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:26.184Z,1510153346.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T15:02:26.185Z,1510153346.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:26.566Z,1510153346.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:26.587Z,1510153346.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T15:02:26.588Z,1510153346.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:26.964Z,1510153346.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:26.979Z,1510153346.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T15:02:26.980Z,1510153346.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:27.368Z,1510153347.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:27.384Z,1510153347.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T15:02:27.385Z,1510153347.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:27.768Z,1510153347.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:27.784Z,1510153347.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T15:02:27.785Z,1510153347.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:28.168Z,1510153348.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:28.184Z,1510153348.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T15:02:28.185Z,1510153348.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:28.565Z,1510153348.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:28.581Z,1510153348.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T15:02:28.582Z,1510153348.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:28.968Z,1510153348.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:28.991Z,1510153348.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T15:02:28.992Z,1510153348.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:29.364Z,1510153349.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:29.387Z,1510153349.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T15:02:29.388Z,1510153349.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:29.768Z,1510153349.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:29.784Z,1510153349.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T15:02:29.785Z,1510153349.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:30.173Z,1510153350.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:30.188Z,1510153350.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T15:02:30.189Z,1510153350.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:30.564Z,1510153350.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:30.580Z,1510153350.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T15:02:30.581Z,1510153350.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:30.965Z,1510153350.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:30.981Z,1510153350.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T15:02:30.982Z,1510153350.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:31.368Z,1510153351.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:31.391Z,1510153351.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T15:02:31.392Z,1510153351.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:31.763Z,1510153351.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:31.780Z,1510153351.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T15:02:31.781Z,1510153351.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:32.165Z,1510153352.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:32.181Z,1510153352.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T15:02:32.182Z,1510153352.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:32.568Z,1510153352.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:32.584Z,1510153352.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T15:02:32.585Z,1510153352.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:32.964Z,1510153352.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:32.979Z,1510153352.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T15:02:32.980Z,1510153352.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:33.368Z,1510153353.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:33.385Z,1510153353.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T15:02:33.386Z,1510153353.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:33.773Z,1510153353.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:33.789Z,1510153353.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T15:02:33.790Z,1510153353.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:34.164Z,1510153354.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:34.227Z,1510153354.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T15:02:34.228Z,1510153354.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:34.564Z,1510153354.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:34.581Z,1510153354.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T15:02:34.582Z,1510153354.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:34.968Z,1510153354.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:34.985Z,1510153354.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T15:02:34.986Z,1510153354.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:35.368Z,1510153355.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:35.384Z,1510153355.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T15:02:35.385Z,1510153355.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:35.773Z,1510153355.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:35.789Z,1510153355.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T15:02:35.790Z,1510153355.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:36.167Z,1510153356.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:36.197Z,1510153356.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T15:02:36.198Z,1510153356.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:36.565Z,1510153356.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:36.587Z,1510153356.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T15:02:36.588Z,1510153356.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:36.965Z,1510153356.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:36.981Z,1510153356.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T15:02:36.982Z,1510153356.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:37.365Z,1510153357.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:37.391Z,1510153357.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T15:02:37.392Z,1510153357.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:37.766Z,1510153357.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:37.782Z,1510153357.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T15:02:37.783Z,1510153357.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:38.170Z,1510153358.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:38.186Z,1510153358.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T15:02:38.187Z,1510153358.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:38.566Z,1510153358.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:38.589Z,1510153358.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T15:02:38.590Z,1510153358.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:38.964Z,1510153358.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:38.981Z,1510153358.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:39.369Z,1510153359.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:39.387Z,1510153359.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:39.766Z,1510153359.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:39.788Z,1510153359.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:40.168Z,1510153360.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:40.185Z,1510153360.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:40.565Z,1510153360.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:40.582Z,1510153360.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:40.967Z,1510153360.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:40.999Z,1510153360.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:41.369Z,1510153361.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:41.385Z,1510153361.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:41.770Z,1510153361.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:41.787Z,1510153361.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:42.166Z,1510153362.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:42.187Z,1510153362.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:42.566Z,1510153362.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:42.597Z,1510153362.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:42.962Z,1510153362.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:42.999Z,1510153362.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:43.361Z,1510153363.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:43.394Z,1510153363.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:43.762Z,1510153363.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:43.795Z,1510153363.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:44.162Z,1510153364.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:44.192Z,1510153364.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:44.562Z,1510153364.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:44.591Z,1510153364.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:44.962Z,1510153364.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:44.979Z,1510153364.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:45.363Z,1510153365.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:45.371Z,1510153365.371 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T15:02:45.372Z,1510153365.372 [BPC1] Data Fault, FailCount= 2
2017-11-08T15:02:45.372Z,1510153365.372 [BPC1](ERROR): Data Fault
2017-11-08T15:02:45.393Z,1510153365.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:45.473Z,1510153365.473 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T15:02:45.762Z,1510153365.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:45.783Z,1510153365.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:46.161Z,1510153366.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:46.178Z,1510153366.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:46.561Z,1510153366.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:46.578Z,1510153366.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:46.665Z,1510153366.665 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T15:02:46.665Z,1510153366.665 [BPC1] No Fault, FailCount= 2
2017-11-08T15:02:46.967Z,1510153366.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:47.046Z,1510153367.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:47.361Z,1510153367.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:47.378Z,1510153367.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:47.767Z,1510153367.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:47.783Z,1510153367.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:47.889Z,1510153367.889 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T15:02:48.163Z,1510153368.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:48.179Z,1510153368.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:48.277Z,1510153368.277 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T15:02:48.278Z,1510153368.278 [NAL9602] No Fault, FailCount= 5
2017-11-08T15:02:48.550Z,1510153368.550 [NAL9602](INFO): Powering up NAL9602
2017-11-08T15:02:48.568Z,1510153368.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:48.584Z,1510153368.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:48.960Z,1510153368.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:48.977Z,1510153368.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:49.366Z,1510153369.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:49.382Z,1510153369.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:49.766Z,1510153369.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:49.788Z,1510153369.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:50.163Z,1510153370.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:50.180Z,1510153370.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:50.566Z,1510153370.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:50.582Z,1510153370.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:50.965Z,1510153370.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:50.982Z,1510153370.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:51.365Z,1510153371.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:51.383Z,1510153371.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:51.765Z,1510153371.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:51.782Z,1510153371.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:52.164Z,1510153372.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:52.181Z,1510153372.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:52.562Z,1510153372.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:52.579Z,1510153372.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:52.965Z,1510153372.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:52.981Z,1510153372.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:53.365Z,1510153373.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:53.382Z,1510153373.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:53.761Z,1510153373.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:53.778Z,1510153373.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:54.165Z,1510153374.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:54.181Z,1510153374.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:54.565Z,1510153374.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:54.582Z,1510153374.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:54.961Z,1510153374.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:54.978Z,1510153374.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:55.364Z,1510153375.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:55.408Z,1510153375.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:55.765Z,1510153375.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:55.782Z,1510153375.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:56.165Z,1510153376.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:56.182Z,1510153376.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:56.565Z,1510153376.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:56.582Z,1510153376.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:56.965Z,1510153376.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:56.982Z,1510153376.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:57.365Z,1510153377.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:57.382Z,1510153377.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:57.765Z,1510153377.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:57.782Z,1510153377.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:58.165Z,1510153378.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:58.182Z,1510153378.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:58.562Z,1510153378.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:58.578Z,1510153378.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:58.965Z,1510153378.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:58.982Z,1510153378.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:59.377Z,1510153379.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:59.408Z,1510153379.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:02:59.749Z,1510153379.749 [NAL9602](INFO): NAL9602 initialized
2017-11-08T15:02:59.766Z,1510153379.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:02:59.783Z,1510153379.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:00.166Z,1510153380.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:00.183Z,1510153380.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:00.577Z,1510153380.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:00.616Z,1510153380.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:00.973Z,1510153380.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:00.989Z,1510153380.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:01.378Z,1510153381.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:01.410Z,1510153381.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:01.766Z,1510153381.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:01.782Z,1510153381.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:02.166Z,1510153382.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:02.183Z,1510153382.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:02.567Z,1510153382.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:02.587Z,1510153382.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:02.989Z,1510153382.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:03.019Z,1510153383.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:03.378Z,1510153383.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:03.394Z,1510153383.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:04.063Z,1510153384.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:04.084Z,1510153384.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:04.222Z,1510153384.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:04.238Z,1510153384.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:04.622Z,1510153384.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:04.644Z,1510153384.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:05.021Z,1510153385.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:05.043Z,1510153385.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:05.426Z,1510153385.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:05.442Z,1510153385.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:05.817Z,1510153385.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:05.833Z,1510153385.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:06.213Z,1510153386.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:06.235Z,1510153386.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:06.618Z,1510153386.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:06.635Z,1510153386.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:07.034Z,1510153387.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:07.062Z,1510153387.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:07.416Z,1510153387.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:07.502Z,1510153387.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:07.832Z,1510153387.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:07.848Z,1510153387.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:08.506Z,1510153388.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:08.552Z,1510153388.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:08.683Z,1510153388.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:08.726Z,1510153388.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:09.101Z,1510153389.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:09.174Z,1510153389.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:09.501Z,1510153389.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:09.532Z,1510153389.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:09.893Z,1510153389.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:09.910Z,1510153389.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:10.286Z,1510153390.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:10.303Z,1510153390.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:10.682Z,1510153390.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:10.698Z,1510153390.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:11.105Z,1510153391.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:11.130Z,1510153391.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:11.497Z,1510153391.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:11.530Z,1510153391.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:12.176Z,1510153392.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:12.192Z,1510153392.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:12.309Z,1510153392.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:12.343Z,1510153392.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:12.736Z,1510153392.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:12.752Z,1510153392.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:13.130Z,1510153393.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:13.150Z,1510153393.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:13.527Z,1510153393.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:13.543Z,1510153393.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:13.916Z,1510153393.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:13.948Z,1510153393.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:14.312Z,1510153394.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:14.345Z,1510153394.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:14.712Z,1510153394.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:14.742Z,1510153394.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:15.143Z,1510153395.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:15.163Z,1510153395.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:15.511Z,1510153395.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:15.556Z,1510153395.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:15.933Z,1510153395.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:15.955Z,1510153395.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:16.609Z,1510153396.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:16.644Z,1510153396.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:16.757Z,1510153396.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:16.807Z,1510153396.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:17.174Z,1510153397.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:17.236Z,1510153397.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:17.585Z,1510153397.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:17.600Z,1510153397.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:17.974Z,1510153397.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:18.004Z,1510153398.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:18.363Z,1510153398.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:18.396Z,1510153398.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:18.796Z,1510153398.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:18.812Z,1510153398.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:19.177Z,1510153399.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:19.204Z,1510153399.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:19.858Z,1510153399.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:19.874Z,1510153399.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:20.007Z,1510153400.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:20.051Z,1510153400.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:20.414Z,1510153400.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:20.446Z,1510153400.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:20.809Z,1510153400.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:20.825Z,1510153400.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:21.219Z,1510153401.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:21.259Z,1510153401.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:21.605Z,1510153401.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:21.621Z,1510153401.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:22.001Z,1510153402.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:22.017Z,1510153402.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:22.402Z,1510153402.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:22.419Z,1510153402.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:22.822Z,1510153402.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:22.850Z,1510153402.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:23.214Z,1510153403.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:23.235Z,1510153403.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:23.885Z,1510153403.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:23.907Z,1510153403.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:24.023Z,1510153404.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:24.074Z,1510153404.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:24.448Z,1510153404.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:24.468Z,1510153404.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:24.849Z,1510153404.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:24.866Z,1510153404.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:25.252Z,1510153405.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:25.268Z,1510153405.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:25.623Z,1510153405.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:25.663Z,1510153405.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:26.023Z,1510153406.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:26.040Z,1510153406.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:26.428Z,1510153406.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:26.466Z,1510153406.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:26.855Z,1510153406.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:26.871Z,1510153406.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:27.236Z,1510153407.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:27.275Z,1510153407.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:27.630Z,1510153407.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:27.647Z,1510153407.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:28.026Z,1510153408.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:28.047Z,1510153408.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:28.432Z,1510153408.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:28.448Z,1510153408.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:28.830Z,1510153408.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:28.847Z,1510153408.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:29.227Z,1510153409.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:29.298Z,1510153409.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:29.631Z,1510153409.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:29.700Z,1510153409.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:30.031Z,1510153410.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:30.052Z,1510153410.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:30.429Z,1510153410.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:30.481Z,1510153410.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:30.834Z,1510153410.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:30.851Z,1510153410.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:31.237Z,1510153411.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:31.294Z,1510153411.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:31.629Z,1510153411.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:31.651Z,1510153411.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:32.034Z,1510153412.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:32.050Z,1510153412.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:32.433Z,1510153412.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:32.449Z,1510153412.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:32.829Z,1510153412.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:32.851Z,1510153412.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:33.238Z,1510153413.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:33.254Z,1510153413.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:33.633Z,1510153413.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:33.650Z,1510153413.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:34.033Z,1510153414.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:34.048Z,1510153414.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:34.436Z,1510153414.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:34.458Z,1510153414.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:34.833Z,1510153414.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:34.850Z,1510153414.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:35.233Z,1510153415.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:35.249Z,1510153415.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:35.642Z,1510153415.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:35.661Z,1510153415.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:36.326Z,1510153416.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:36.342Z,1510153416.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:36.449Z,1510153416.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:36.499Z,1510153416.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:36.880Z,1510153416.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:36.896Z,1510153416.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:37.273Z,1510153417.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:37.290Z,1510153417.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:37.661Z,1510153417.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:37.703Z,1510153417.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:38.055Z,1510153418.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:38.094Z,1510153418.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:38.452Z,1510153418.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:38.492Z,1510153418.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:38.881Z,1510153418.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:38.897Z,1510153418.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:39.255Z,1510153419.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:39.316Z,1510153419.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:39.678Z,1510153419.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:39.699Z,1510153419.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:40.373Z,1510153420.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:40.391Z,1510153420.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:40.503Z,1510153420.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:40.536Z,1510153420.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:40.918Z,1510153420.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:40.948Z,1510153420.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:41.318Z,1510153421.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:41.347Z,1510153421.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:41.718Z,1510153421.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:41.750Z,1510153421.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:42.099Z,1510153422.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:42.120Z,1510153422.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:42.506Z,1510153422.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:42.523Z,1510153422.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:42.936Z,1510153422.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:42.952Z,1510153422.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:43.307Z,1510153423.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:43.324Z,1510153423.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:43.703Z,1510153423.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:43.720Z,1510153423.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:44.122Z,1510153424.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:44.148Z,1510153424.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:44.791Z,1510153424.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:44.808Z,1510153424.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:44.913Z,1510153424.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:44.937Z,1510153424.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:45.341Z,1510153425.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:45.357Z,1510153425.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:45.743Z,1510153425.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:45.759Z,1510153425.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:46.125Z,1510153426.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:46.158Z,1510153426.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:46.520Z,1510153426.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:46.545Z,1510153426.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:46.915Z,1510153426.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:46.936Z,1510153426.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:47.319Z,1510153427.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:47.340Z,1510153427.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:47.725Z,1510153427.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:47.741Z,1510153427.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:48.145Z,1510153428.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:48.176Z,1510153428.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:48.533Z,1510153428.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:48.566Z,1510153428.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:49.213Z,1510153429.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:49.229Z,1510153429.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:49.333Z,1510153429.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:49.349Z,1510153429.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:49.754Z,1510153429.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:49.784Z,1510153429.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:50.153Z,1510153430.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:50.188Z,1510153430.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:50.554Z,1510153430.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:50.584Z,1510153430.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:50.943Z,1510153430.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:50.979Z,1510153430.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:51.340Z,1510153431.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:51.412Z,1510153431.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:51.768Z,1510153431.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:51.785Z,1510153431.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:52.143Z,1510153432.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:52.180Z,1510153432.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:52.557Z,1510153432.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:52.627Z,1510153432.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:53.228Z,1510153433.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:53.244Z,1510153433.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:53.348Z,1510153433.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:53.404Z,1510153433.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:53.774Z,1510153433.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:53.790Z,1510153433.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:54.161Z,1510153434.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:54.191Z,1510153434.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:54.562Z,1510153434.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:54.595Z,1510153434.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:54.953Z,1510153434.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:54.989Z,1510153434.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:55.352Z,1510153435.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:55.368Z,1510153435.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:55.781Z,1510153435.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:55.798Z,1510153435.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:56.166Z,1510153436.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:56.199Z,1510153436.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:56.877Z,1510153436.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:56.897Z,1510153436.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:57.005Z,1510153437.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:57.038Z,1510153437.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:57.433Z,1510153437.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:57.449Z,1510153437.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:57.832Z,1510153437.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:57.847Z,1510153437.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:58.232Z,1510153438.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:58.248Z,1510153438.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:58.612Z,1510153438.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:58.648Z,1510153438.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:59.015Z,1510153439.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:59.050Z,1510153439.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:59.413Z,1510153439.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:59.450Z,1510153439.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:03:59.845Z,1510153439.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:03:59.861Z,1510153439.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:00.226Z,1510153440.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:00.260Z,1510153440.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:00.894Z,1510153440.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:00.911Z,1510153440.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:01.017Z,1510153441.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:01.055Z,1510153441.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:01.434Z,1510153441.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:01.495Z,1510153441.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:01.836Z,1510153441.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:01.852Z,1510153441.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:02.239Z,1510153442.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:02.260Z,1510153442.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:02.616Z,1510153442.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:02.645Z,1510153442.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:03.015Z,1510153443.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:03.031Z,1510153443.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:03.417Z,1510153443.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:03.434Z,1510153443.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:03.848Z,1510153443.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:03.865Z,1510153443.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:04.233Z,1510153444.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:04.261Z,1510153444.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:04.903Z,1510153444.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:04.919Z,1510153444.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:05.031Z,1510153445.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:05.064Z,1510153445.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:05.458Z,1510153445.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:05.474Z,1510153445.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:05.849Z,1510153445.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:05.866Z,1510153445.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:06.252Z,1510153446.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:06.269Z,1510153446.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:06.628Z,1510153446.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:06.656Z,1510153446.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:07.028Z,1510153447.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:07.044Z,1510153447.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:07.433Z,1510153447.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:07.461Z,1510153447.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:07.850Z,1510153447.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:07.875Z,1510153447.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:08.227Z,1510153448.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:08.244Z,1510153448.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:08.646Z,1510153448.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:08.673Z,1510153448.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:09.315Z,1510153449.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:09.335Z,1510153449.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:09.452Z,1510153449.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:09.500Z,1510153449.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:09.871Z,1510153449.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:09.892Z,1510153449.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:10.273Z,1510153450.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:10.289Z,1510153450.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:10.673Z,1510153450.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:10.689Z,1510153450.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:11.051Z,1510153451.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:11.085Z,1510153451.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:11.451Z,1510153451.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:11.483Z,1510153451.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:11.884Z,1510153451.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:11.901Z,1510153451.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:12.272Z,1510153452.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:12.289Z,1510153452.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:12.938Z,1510153452.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:12.954Z,1510153452.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:13.091Z,1510153453.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:13.131Z,1510153453.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:13.498Z,1510153453.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:13.588Z,1510153453.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:13.898Z,1510153453.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:13.958Z,1510153453.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:14.301Z,1510153454.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:14.396Z,1510153454.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:14.680Z,1510153454.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:14.696Z,1510153454.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:15.079Z,1510153455.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:15.143Z,1510153455.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:15.480Z,1510153455.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:15.515Z,1510153455.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:15.914Z,1510153455.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:15.951Z,1510153455.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:16.283Z,1510153456.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:16.307Z,1510153456.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:16.701Z,1510153456.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:16.717Z,1510153456.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:17.382Z,1510153457.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:17.408Z,1510153457.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:17.521Z,1510153457.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:17.571Z,1510153457.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:17.942Z,1510153457.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:17.965Z,1510153457.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:18.345Z,1510153458.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:18.361Z,1510153458.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:18.734Z,1510153458.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:18.767Z,1510153458.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:19.127Z,1510153459.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:19.159Z,1510153459.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:19.246Z,1510153459.246 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:04:19.246Z,1510153459.246 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T15:04:19.508Z,1510153459.508 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:04:19.509Z,1510153459.509 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:04:19.509Z,1510153459.509 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:04:19.509Z,1510153459.509 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T15:04:19.509Z,1510153459.509 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:04:19.525Z,1510153459.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:19.562Z,1510153459.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:19.637Z,1510153459.637 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:04:19.913Z,1510153459.913 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:04:19.962Z,1510153459.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:20.015Z,1510153460.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:20.111Z,1510153460.111 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:04:20.335Z,1510153460.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:20.356Z,1510153460.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:20.738Z,1510153460.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:20.754Z,1510153460.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:21.413Z,1510153461.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:21.430Z,1510153461.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:21.517Z,1510153461.517 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:04:21.517Z,1510153461.517 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T15:04:21.544Z,1510153461.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:21.599Z,1510153461.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:21.725Z,1510153461.725 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:04:21.725Z,1510153461.725 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:04:21.726Z,1510153461.726 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:04:21.726Z,1510153461.726 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T15:04:21.726Z,1510153461.726 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:04:21.968Z,1510153461.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:21.985Z,1510153461.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:22.067Z,1510153462.067 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:04:22.129Z,1510153462.129 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:04:22.214Z,1510153462.214 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:04:22.373Z,1510153462.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:22.392Z,1510153462.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:22.772Z,1510153462.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:22.797Z,1510153462.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:23.148Z,1510153463.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:23.200Z,1510153463.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:23.544Z,1510153463.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:23.569Z,1510153463.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:23.658Z,1510153463.658 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:04:23.658Z,1510153463.658 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T15:04:23.829Z,1510153463.829 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:04:23.829Z,1510153463.829 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:04:23.829Z,1510153463.829 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:04:23.829Z,1510153463.829 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T15:04:23.829Z,1510153463.829 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:04:23.976Z,1510153463.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:23.000Z,1510153464.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:24.081Z,1510153464.081 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:04:24.233Z,1510153464.233 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:04:24.314Z,1510153464.314 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:04:24.349Z,1510153464.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:24.389Z,1510153464.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:24.748Z,1510153464.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:24.765Z,1510153464.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:25.152Z,1510153465.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:25.169Z,1510153465.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:25.547Z,1510153465.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:25.564Z,1510153465.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:25.645Z,1510153465.645 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:04:25.645Z,1510153465.645 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T15:04:25.933Z,1510153465.933 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:04:25.933Z,1510153465.933 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:04:25.934Z,1510153465.934 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:04:25.934Z,1510153465.934 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T15:04:25.934Z,1510153465.934 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:04:25.952Z,1510153465.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:25.969Z,1510153465.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:26.069Z,1510153466.069 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:04:26.338Z,1510153466.338 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:04:26.396Z,1510153466.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:26.428Z,1510153466.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:26.529Z,1510153466.529 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:04:26.752Z,1510153466.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:26.769Z,1510153466.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:27.149Z,1510153467.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:27.166Z,1510153467.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:27.550Z,1510153467.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:27.566Z,1510153467.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:27.949Z,1510153467.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:27.966Z,1510153467.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:28.049Z,1510153468.049 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:04:28.049Z,1510153468.049 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T15:04:28.145Z,1510153468.145 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:04:28.145Z,1510153468.145 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:04:28.145Z,1510153468.145 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:04:28.145Z,1510153468.145 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T15:04:28.145Z,1510153468.145 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:04:28.352Z,1510153468.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:28.368Z,1510153468.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:28.446Z,1510153468.446 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:04:28.446Z,1510153468.446 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:04:28.549Z,1510153468.549 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:04:28.634Z,1510153468.634 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:04:28.756Z,1510153468.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:28.774Z,1510153468.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:29.158Z,1510153469.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:29.174Z,1510153469.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:29.830Z,1510153469.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:29.853Z,1510153469.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:29.968Z,1510153469.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:30.008Z,1510153470.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:30.388Z,1510153470.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:30.405Z,1510153470.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:30.777Z,1510153470.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:30.810Z,1510153470.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:31.189Z,1510153471.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:31.208Z,1510153471.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:31.564Z,1510153471.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:31.580Z,1510153471.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:31.963Z,1510153471.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:31.980Z,1510153471.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:32.368Z,1510153472.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:32.384Z,1510153472.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:32.800Z,1510153472.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:32.817Z,1510153472.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:33.167Z,1510153473.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:33.184Z,1510153473.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:33.577Z,1510153473.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:33.611Z,1510153473.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:34.262Z,1510153474.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:34.278Z,1510153474.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:34.387Z,1510153474.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:34.436Z,1510153474.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:34.808Z,1510153474.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:34.878Z,1510153474.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:35.203Z,1510153475.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:35.272Z,1510153475.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:35.603Z,1510153475.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:35.620Z,1510153475.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:35.983Z,1510153475.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:36.036Z,1510153476.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:36.388Z,1510153476.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:36.423Z,1510153476.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:36.815Z,1510153476.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:36.872Z,1510153476.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:37.187Z,1510153477.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:37.235Z,1510153477.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:37.583Z,1510153477.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:37.618Z,1510153477.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:38.007Z,1510153478.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:38.024Z,1510153478.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:38.674Z,1510153478.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:38.690Z,1510153478.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:38.815Z,1510153478.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:38.848Z,1510153478.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:39.222Z,1510153479.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:39.238Z,1510153479.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:39.621Z,1510153479.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:39.637Z,1510153479.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:40.022Z,1510153480.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:40.038Z,1510153480.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:40.416Z,1510153480.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:40.440Z,1510153480.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:40.814Z,1510153480.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:40.829Z,1510153480.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:41.216Z,1510153481.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:41.240Z,1510153481.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:41.616Z,1510153481.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:41.632Z,1510153481.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:42.033Z,1510153482.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:42.068Z,1510153482.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:42.424Z,1510153482.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:42.441Z,1510153482.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:43.246Z,1510153483.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:43.267Z,1510153483.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:43.379Z,1510153483.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:43.395Z,1510153483.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:43.798Z,1510153483.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:43.831Z,1510153483.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:44.193Z,1510153484.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:44.223Z,1510153484.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:44.593Z,1510153484.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:44.622Z,1510153484.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:44.983Z,1510153484.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:45.031Z,1510153485.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:45.384Z,1510153485.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:45.400Z,1510153485.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:45.817Z,1510153485.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:45.840Z,1510153485.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:46.183Z,1510153486.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:46.201Z,1510153486.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:46.598Z,1510153486.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:46.623Z,1510153486.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:47.274Z,1510153487.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:47.290Z,1510153487.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:47.395Z,1510153487.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:47.431Z,1510153487.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:47.816Z,1510153487.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:47.840Z,1510153487.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:48.225Z,1510153488.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:48.246Z,1510153488.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:48.615Z,1510153488.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:48.632Z,1510153488.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:48.999Z,1510153488.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:49.032Z,1510153489.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:49.400Z,1510153489.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:49.426Z,1510153489.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:49.827Z,1510153489.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:49.848Z,1510153489.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:50.220Z,1510153490.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:50.235Z,1510153490.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:50.882Z,1510153490.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:50.898Z,1510153490.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:51.038Z,1510153491.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:51.075Z,1510153491.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:51.446Z,1510153491.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:51.478Z,1510153491.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:51.841Z,1510153491.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:51.871Z,1510153491.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:52.246Z,1510153492.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:52.279Z,1510153492.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:52.634Z,1510153492.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:52.650Z,1510153492.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:53.035Z,1510153493.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:53.051Z,1510153493.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:53.440Z,1510153493.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:53.456Z,1510153493.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:53.857Z,1510153493.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:53.882Z,1510153493.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:54.244Z,1510153494.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:54.263Z,1510153494.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:54.927Z,1510153494.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:54.944Z,1510153494.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:55.047Z,1510153495.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:55.092Z,1510153495.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:55.461Z,1510153495.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:55.487Z,1510153495.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:55.862Z,1510153495.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:55.893Z,1510153495.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:56.257Z,1510153496.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:56.284Z,1510153496.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:56.648Z,1510153496.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:56.700Z,1510153496.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:57.046Z,1510153497.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:57.107Z,1510153497.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:57.453Z,1510153497.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:57.469Z,1510153497.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:57.873Z,1510153497.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:57.920Z,1510153497.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:58.258Z,1510153498.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:58.273Z,1510153498.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:58.925Z,1510153498.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:58.997Z,1510153498.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:59.115Z,1510153499.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:59.155Z,1510153499.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:59.526Z,1510153499.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:59.553Z,1510153499.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:04:59.921Z,1510153499.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:04:59.954Z,1510153499.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:00.321Z,1510153500.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:00.359Z,1510153500.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:00.706Z,1510153500.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:00.722Z,1510153500.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:01.110Z,1510153501.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:01.126Z,1510153501.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:01.510Z,1510153501.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:01.526Z,1510153501.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:01.930Z,1510153501.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:01.960Z,1510153501.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:02.306Z,1510153502.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:02.322Z,1510153502.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:02.721Z,1510153502.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:02.759Z,1510153502.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:03.403Z,1510153503.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:03.419Z,1510153503.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:03.517Z,1510153503.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:03.567Z,1510153503.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:03.945Z,1510153503.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:03.961Z,1510153503.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:04.334Z,1510153504.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:04.366Z,1510153504.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:04.734Z,1510153504.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:04.758Z,1510153504.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:05.123Z,1510153505.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:05.160Z,1510153505.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:05.524Z,1510153505.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:05.557Z,1510153505.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:05.946Z,1510153505.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:05.962Z,1510153505.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:06.345Z,1510153506.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:06.367Z,1510153506.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:07.009Z,1510153507.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:07.054Z,1510153507.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:07.171Z,1510153507.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:07.212Z,1510153507.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:07.593Z,1510153507.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:07.609Z,1510153507.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:07.981Z,1510153507.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:08.012Z,1510153508.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:08.381Z,1510153508.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:08.412Z,1510153508.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:08.772Z,1510153508.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:08.800Z,1510153508.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:09.171Z,1510153509.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:09.213Z,1510153509.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:09.568Z,1510153509.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:09.584Z,1510153509.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:10.003Z,1510153510.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:10.019Z,1510153510.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:10.367Z,1510153510.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:10.388Z,1510153510.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:10.781Z,1510153510.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:10.814Z,1510153510.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:11.500Z,1510153511.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:11.519Z,1510153511.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:11.629Z,1510153511.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:11.677Z,1510153511.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:12.050Z,1510153512.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:12.072Z,1510153512.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:12.456Z,1510153512.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:12.471Z,1510153512.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:12.850Z,1510153512.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:12.875Z,1510153512.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:13.235Z,1510153513.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:13.273Z,1510153513.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:13.632Z,1510153513.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:13.669Z,1510153513.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:14.063Z,1510153514.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:14.084Z,1510153514.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:14.456Z,1510153514.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:14.477Z,1510153514.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:15.122Z,1510153515.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:15.139Z,1510153515.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:15.279Z,1510153515.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:15.319Z,1510153515.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:15.687Z,1510153515.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:15.694Z,1510153515.694 [PNI_TCM](ERROR): CRC does not match. Expected:0x18318 got:0x49741
2017-11-08T15:05:15.717Z,1510153515.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:16.086Z,1510153516.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:16.116Z,1510153516.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:16.490Z,1510153516.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:16.513Z,1510153516.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:16.874Z,1510153516.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:16.919Z,1510153516.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:17.272Z,1510153517.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:17.299Z,1510153517.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:17.677Z,1510153517.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:17.694Z,1510153517.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:18.102Z,1510153518.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:18.125Z,1510153518.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:18.474Z,1510153518.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:18.523Z,1510153518.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:18.884Z,1510153518.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:18.900Z,1510153518.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:19.564Z,1510153519.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:19.667Z,1510153519.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:19.781Z,1510153519.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:19.798Z,1510153519.798 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:19.798Z,1510153519.798 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2017-11-08T15:05:19.798Z,1510153519.798 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T15:05:19.800Z,1510153519.800 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:19.800Z,1510153519.800 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34
2017-11-08T15:05:19.800Z,1510153519.800 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T15:05:19.802Z,1510153519.802 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:19.802Z,1510153519.802 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 34
2017-11-08T15:05:19.802Z,1510153519.802 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T15:05:19.885Z,1510153519.885 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T15:05:19.885Z,1510153519.885 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T15:05:19.886Z,1510153519.886 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T15:05:20.190Z,1510153520.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:20.321Z,1510153520.321 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T15:05:20.321Z,1510153520.321 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2017-11-08T15:05:20.321Z,1510153520.321 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T15:05:20.321Z,1510153520.321 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34
2017-11-08T15:05:20.322Z,1510153520.322 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T15:05:20.322Z,1510153520.322 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 34
2017-11-08T15:05:20.591Z,1510153520.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:20.614Z,1510153520.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T15:05:20.615Z,1510153520.615 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:05:20.615Z,1510153520.615 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:05:20.615Z,1510153520.615 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T15:05:20.616Z,1510153520.616 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:05:20.616Z,1510153520.616 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:05:20.637Z,1510153520.637 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T15:05:20.637Z,1510153520.637 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:05:20.637Z,1510153520.637 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:05:20.992Z,1510153520.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:21.047Z,1510153521.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T15:05:21.048Z,1510153521.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:21.379Z,1510153521.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:21.402Z,1510153521.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T15:05:21.403Z,1510153521.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:21.801Z,1510153521.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:21.841Z,1510153521.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T15:05:21.842Z,1510153521.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:22.191Z,1510153522.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:22.218Z,1510153522.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T15:05:22.219Z,1510153522.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:22.868Z,1510153522.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:22.888Z,1510153522.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.1 s old, using for 20.0 s.
2017-11-08T15:05:22.889Z,1510153522.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:22.000Z,1510153523.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:23.042Z,1510153523.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T15:05:23.043Z,1510153523.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:23.417Z,1510153523.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:23.445Z,1510153523.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T15:05:23.446Z,1510153523.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:23.817Z,1510153523.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:23.845Z,1510153523.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T15:05:23.846Z,1510153523.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:24.213Z,1510153524.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:24.248Z,1510153524.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-08T15:05:24.249Z,1510153524.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:24.600Z,1510153524.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:24.619Z,1510153524.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T15:05:24.620Z,1510153524.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:25.002Z,1510153525.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:25.018Z,1510153525.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T15:05:25.019Z,1510153525.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:25.399Z,1510153525.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:25.415Z,1510153525.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T15:05:25.416Z,1510153525.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:25.831Z,1510153525.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:25.847Z,1510153525.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T15:05:25.848Z,1510153525.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:26.198Z,1510153526.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:26.214Z,1510153526.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T15:05:26.215Z,1510153526.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:26.613Z,1510153526.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:26.645Z,1510153526.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T15:05:26.646Z,1510153526.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:27.291Z,1510153527.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:27.307Z,1510153527.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2017-11-08T15:05:27.308Z,1510153527.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:27.413Z,1510153527.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:27.458Z,1510153527.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T15:05:27.459Z,1510153527.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:27.836Z,1510153527.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:27.852Z,1510153527.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T15:05:27.853Z,1510153527.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:28.248Z,1510153528.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:28.264Z,1510153528.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T15:05:28.265Z,1510153528.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:28.636Z,1510153528.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:28.742Z,1510153528.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T15:05:28.743Z,1510153528.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:29.015Z,1510153529.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:29.194Z,1510153529.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2017-11-08T15:05:29.195Z,1510153529.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:29.417Z,1510153529.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:29.451Z,1510153529.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T15:05:29.453Z,1510153529.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:29.842Z,1510153529.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:29.882Z,1510153529.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T15:05:29.883Z,1510153529.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:30.233Z,1510153530.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:30.265Z,1510153530.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T15:05:30.266Z,1510153530.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:30.914Z,1510153530.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:30.935Z,1510153530.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2017-11-08T15:05:30.936Z,1510153530.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:31.079Z,1510153531.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:31.119Z,1510153531.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T15:05:31.120Z,1510153531.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:31.490Z,1510153531.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:31.519Z,1510153531.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T15:05:31.520Z,1510153531.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:31.889Z,1510153531.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:31.914Z,1510153531.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T15:05:31.915Z,1510153531.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:32.300Z,1510153532.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:32.316Z,1510153532.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T15:05:32.317Z,1510153532.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:32.679Z,1510153532.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:32.714Z,1510153532.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T15:05:32.715Z,1510153532.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:33.075Z,1510153533.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:33.090Z,1510153533.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T15:05:33.091Z,1510153533.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:33.480Z,1510153533.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:33.496Z,1510153533.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T15:05:33.513Z,1510153533.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:33.908Z,1510153533.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:33.927Z,1510153533.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T15:05:33.928Z,1510153533.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:34.275Z,1510153534.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:34.290Z,1510153534.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T15:05:34.291Z,1510153534.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:34.693Z,1510153534.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:34.721Z,1510153534.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T15:05:34.722Z,1510153534.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:35.367Z,1510153535.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:35.383Z,1510153535.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T15:05:35.384Z,1510153535.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:35.505Z,1510153535.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:35.548Z,1510153535.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T15:05:35.549Z,1510153535.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:35.930Z,1510153535.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:35.946Z,1510153535.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T15:05:35.947Z,1510153535.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:36.330Z,1510153536.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:36.347Z,1510153536.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T15:05:36.348Z,1510153536.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:36.731Z,1510153536.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:36.747Z,1510153536.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T15:05:36.748Z,1510153536.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:37.121Z,1510153537.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:37.137Z,1510153537.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T15:05:37.138Z,1510153537.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:37.518Z,1510153537.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:37.534Z,1510153537.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T15:05:37.535Z,1510153537.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:37.933Z,1510153537.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:37.949Z,1510153537.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-08T15:05:37.950Z,1510153537.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:38.330Z,1510153538.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:38.347Z,1510153538.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T15:05:38.349Z,1510153538.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:39.002Z,1510153539.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:39.031Z,1510153539.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T15:05:39.032Z,1510153539.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:39.147Z,1510153539.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:39.183Z,1510153539.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-08T15:05:39.184Z,1510153539.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:39.568Z,1510153539.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:39.584Z,1510153539.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-08T15:05:39.585Z,1510153539.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:39.967Z,1510153539.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:39.983Z,1510153539.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:40.367Z,1510153540.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:40.383Z,1510153540.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:40.748Z,1510153540.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:40.777Z,1510153540.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:41.143Z,1510153541.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:41.202Z,1510153541.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:41.548Z,1510153541.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:41.581Z,1510153541.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:41.980Z,1510153541.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:41.996Z,1510153541.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:42.347Z,1510153542.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:42.363Z,1510153542.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:42.757Z,1510153542.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:42.792Z,1510153542.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:43.442Z,1510153543.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:43.458Z,1510153543.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:43.594Z,1510153543.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:43.635Z,1510153543.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:44.001Z,1510153544.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:44.032Z,1510153544.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:44.401Z,1510153544.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:44.410Z,1510153544.410 [BPC1](ERROR): Failed to receive battery data
2017-11-08T15:05:44.410Z,1510153544.410 [BPC1] Communications Fault, FailCount= 1
2017-11-08T15:05:44.410Z,1510153544.410 [BPC1](ERROR): Communications Fault
2017-11-08T15:05:44.443Z,1510153544.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:44.525Z,1510153544.525 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T15:05:44.797Z,1510153544.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:44.830Z,1510153544.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:45.190Z,1510153545.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:45.206Z,1510153545.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:45.587Z,1510153545.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:45.608Z,1510153545.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:45.701Z,1510153545.701 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T15:05:45.701Z,1510153545.701 [BPC1] No Fault, FailCount= 1
2017-11-08T15:05:46.013Z,1510153546.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:46.089Z,1510153546.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:46.401Z,1510153546.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:46.440Z,1510153546.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:47.082Z,1510153547.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:47.103Z,1510153547.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:47.215Z,1510153547.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:47.263Z,1510153547.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:47.636Z,1510153547.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:47.652Z,1510153547.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:48.035Z,1510153548.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:48.051Z,1510153548.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:48.431Z,1510153548.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:48.447Z,1510153548.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:48.815Z,1510153548.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:48.841Z,1510153548.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:49.215Z,1510153549.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:49.248Z,1510153549.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:49.612Z,1510153549.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:49.645Z,1510153549.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:50.040Z,1510153550.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:50.059Z,1510153550.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:50.415Z,1510153550.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:50.448Z,1510153550.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:50.831Z,1510153550.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:50.848Z,1510153550.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:51.510Z,1510153551.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:51.539Z,1510153551.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:51.659Z,1510153551.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:51.689Z,1510153551.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:52.084Z,1510153552.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:52.103Z,1510153552.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:52.483Z,1510153552.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:52.499Z,1510153552.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:52.879Z,1510153552.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:52.909Z,1510153552.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:53.261Z,1510153553.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:53.294Z,1510153553.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:53.664Z,1510153553.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:53.701Z,1510153553.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:54.092Z,1510153554.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:54.139Z,1510153554.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:54.486Z,1510153554.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:54.502Z,1510153554.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:55.154Z,1510153555.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:55.185Z,1510153555.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:55.305Z,1510153555.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:55.342Z,1510153555.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:55.718Z,1510153555.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:55.748Z,1510153555.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:56.117Z,1510153556.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:56.147Z,1510153556.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:56.514Z,1510153556.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:56.547Z,1510153556.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:56.904Z,1510153556.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:56.933Z,1510153556.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:57.307Z,1510153557.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:57.323Z,1510153557.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:57.704Z,1510153557.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:57.720Z,1510153557.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:58.135Z,1510153558.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:58.151Z,1510153558.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:58.500Z,1510153558.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:58.516Z,1510153558.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:58.918Z,1510153558.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:58.944Z,1510153558.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:59.593Z,1510153559.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:59.609Z,1510153559.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:05:59.709Z,1510153559.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:05:59.737Z,1510153559.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:00.140Z,1510153560.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:00.163Z,1510153560.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:00.536Z,1510153560.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:00.559Z,1510153560.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:00.937Z,1510153560.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:00.953Z,1510153560.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:01.315Z,1510153561.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:01.340Z,1510153561.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:01.720Z,1510153561.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:01.756Z,1510153561.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:02.147Z,1510153562.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:02.168Z,1510153562.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:02.529Z,1510153562.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:02.564Z,1510153562.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:03.202Z,1510153563.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:03.218Z,1510153563.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:03.325Z,1510153563.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:03.357Z,1510153563.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:03.752Z,1510153563.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:03.768Z,1510153563.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:04.151Z,1510153564.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:04.167Z,1510153564.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:04.551Z,1510153564.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:04.623Z,1510153564.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:04.931Z,1510153564.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:04.960Z,1510153564.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:05.332Z,1510153565.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:05.357Z,1510153565.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:05.759Z,1510153565.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:05.784Z,1510153565.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:06.131Z,1510153566.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:06.188Z,1510153566.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:06.531Z,1510153566.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:06.555Z,1510153566.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:06.952Z,1510153566.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:07.011Z,1510153567.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:07.626Z,1510153567.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:07.654Z,1510153567.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:07.769Z,1510153567.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:07.785Z,1510153567.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:08.186Z,1510153568.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:08.218Z,1510153568.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:08.586Z,1510153568.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:08.612Z,1510153568.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:08.986Z,1510153568.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:09.011Z,1510153569.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:09.377Z,1510153569.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:09.392Z,1510153569.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:09.803Z,1510153569.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:09.820Z,1510153569.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:10.186Z,1510153570.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:10.212Z,1510153570.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:10.861Z,1510153570.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:10.883Z,1510153570.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:11.011Z,1510153571.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:11.056Z,1510153571.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:11.418Z,1510153571.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:11.434Z,1510153571.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:11.817Z,1510153571.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:11.839Z,1510153571.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:12.218Z,1510153572.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:12.234Z,1510153572.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:12.613Z,1510153572.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:12.629Z,1510153572.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:13.010Z,1510153573.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:13.026Z,1510153573.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:13.414Z,1510153573.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:13.430Z,1510153573.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:13.829Z,1510153573.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:13.859Z,1510153573.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:14.213Z,1510153574.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:14.229Z,1510153574.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:14.622Z,1510153574.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:14.661Z,1510153574.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:15.337Z,1510153575.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:15.385Z,1510153575.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:15.520Z,1510153575.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:15.561Z,1510153575.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:15.930Z,1510153575.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:15.960Z,1510153575.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:16.329Z,1510153576.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:16.361Z,1510153576.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:16.729Z,1510153576.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:16.761Z,1510153576.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:17.122Z,1510153577.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:17.139Z,1510153577.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:17.522Z,1510153577.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:17.538Z,1510153577.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:17.948Z,1510153577.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:17.965Z,1510153577.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:18.329Z,1510153578.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:18.361Z,1510153578.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:19.007Z,1510153579.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:19.023Z,1510153579.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:19.128Z,1510153579.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:19.163Z,1510153579.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:19.542Z,1510153579.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:19.576Z,1510153579.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:19.941Z,1510153579.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:19.966Z,1510153579.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:20.337Z,1510153580.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:20.365Z,1510153580.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:20.727Z,1510153580.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:20.744Z,1510153580.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:21.123Z,1510153581.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:21.138Z,1510153581.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:21.523Z,1510153581.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:21.539Z,1510153581.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:21.959Z,1510153581.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:21.976Z,1510153581.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:22.323Z,1510153582.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:22.339Z,1510153582.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:22.741Z,1510153582.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:22.770Z,1510153582.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:23.418Z,1510153583.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:23.434Z,1510153583.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:23.547Z,1510153583.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:23.595Z,1510153583.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:23.968Z,1510153583.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:23.984Z,1510153583.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:24.364Z,1510153584.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:24.380Z,1510153584.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:24.759Z,1510153584.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:24.776Z,1510153584.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:25.148Z,1510153585.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:25.185Z,1510153585.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:25.544Z,1510153585.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:25.577Z,1510153585.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:25.970Z,1510153585.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:25.986Z,1510153585.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:26.367Z,1510153586.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:26.434Z,1510153586.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:27.090Z,1510153587.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:27.115Z,1510153587.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:27.229Z,1510153587.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:27.279Z,1510153587.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:27.657Z,1510153587.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:27.693Z,1510153587.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:28.056Z,1510153588.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:28.077Z,1510153588.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:28.441Z,1510153588.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:28.483Z,1510153588.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:28.835Z,1510153588.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:28.876Z,1510153588.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:29.231Z,1510153589.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:29.271Z,1510153589.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:29.632Z,1510153589.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:29.678Z,1510153589.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:30.071Z,1510153590.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:30.087Z,1510153590.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:30.445Z,1510153590.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:30.473Z,1510153590.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:31.115Z,1510153591.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:31.131Z,1510153591.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:31.235Z,1510153591.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:31.287Z,1510153591.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:31.650Z,1510153591.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:31.689Z,1510153591.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:32.045Z,1510153592.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:32.073Z,1510153592.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:32.449Z,1510153592.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:32.484Z,1510153592.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:32.831Z,1510153592.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:32.851Z,1510153592.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:33.231Z,1510153593.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:33.247Z,1510153593.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:33.632Z,1510153593.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:33.650Z,1510153593.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:34.066Z,1510153594.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:34.087Z,1510153594.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:34.445Z,1510153594.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:34.476Z,1510153594.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:35.130Z,1510153595.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:35.151Z,1510153595.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:35.288Z,1510153595.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:35.306Z,1510153595.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:35.695Z,1510153595.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:35.728Z,1510153595.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:36.097Z,1510153596.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:36.128Z,1510153596.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:36.494Z,1510153596.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:36.526Z,1510153596.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:36.883Z,1510153596.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:36.927Z,1510153596.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:37.284Z,1510153597.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:37.291Z,1510153597.291 [PNI_TCM](ERROR): CRC does not match. Expected:0x43702 got:0x49600
2017-11-08T15:06:37.332Z,1510153597.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:37.682Z,1510153597.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:37.732Z,1510153597.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:38.106Z,1510153598.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:38.130Z,1510153598.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:38.482Z,1510153598.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:38.531Z,1510153598.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:38.891Z,1510153598.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:38.898Z,1510153598.898 [PNI_TCM](ERROR): CRC does not match. Expected:0x61735 got:0x38407
2017-11-08T15:06:38.935Z,1510153598.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:39.575Z,1510153599.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:39.591Z,1510153599.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:39.697Z,1510153599.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:39.725Z,1510153599.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:40.124Z,1510153600.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:40.148Z,1510153600.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:40.524Z,1510153600.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:40.540Z,1510153600.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:40.913Z,1510153600.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:40.941Z,1510153600.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:41.303Z,1510153601.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:41.337Z,1510153601.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:41.706Z,1510153601.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:41.737Z,1510153601.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:42.132Z,1510153602.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:42.148Z,1510153602.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:42.524Z,1510153602.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:42.541Z,1510153602.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:43.186Z,1510153603.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:43.202Z,1510153603.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:43.304Z,1510153603.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:43.332Z,1510153603.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:43.731Z,1510153603.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:43.747Z,1510153603.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:44.128Z,1510153604.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:44.147Z,1510153604.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:44.517Z,1510153604.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:44.551Z,1510153604.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:44.912Z,1510153604.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:44.946Z,1510153604.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:45.311Z,1510153605.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:45.341Z,1510153605.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:45.708Z,1510153605.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:45.740Z,1510153605.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:46.140Z,1510153606.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:46.156Z,1510153606.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:46.509Z,1510153606.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:46.541Z,1510153606.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:46.925Z,1510153606.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:46.951Z,1510153606.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:47.602Z,1510153607.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:47.620Z,1510153607.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:47.752Z,1510153607.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:47.770Z,1510153607.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:48.157Z,1510153608.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:48.208Z,1510153608.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:48.558Z,1510153608.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:48.575Z,1510153608.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:48.954Z,1510153608.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:48.971Z,1510153608.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:49.350Z,1510153609.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:49.409Z,1510153609.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:49.770Z,1510153609.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:49.799Z,1510153609.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:50.159Z,1510153610.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:50.176Z,1510153610.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:50.830Z,1510153610.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:50.883Z,1510153610.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:51.019Z,1510153611.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:51.058Z,1510153611.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:51.426Z,1510153611.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:51.472Z,1510153611.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:51.821Z,1510153611.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:51.853Z,1510153611.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:52.226Z,1510153612.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:52.256Z,1510153612.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:52.615Z,1510153612.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:52.635Z,1510153612.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:53.014Z,1510153613.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:53.030Z,1510153613.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:53.414Z,1510153613.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:53.435Z,1510153613.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:53.842Z,1510153613.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:53.859Z,1510153613.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:54.210Z,1510153614.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:54.226Z,1510153614.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:54.625Z,1510153614.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:54.657Z,1510153614.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:55.341Z,1510153615.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:55.356Z,1510153615.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:55.469Z,1510153615.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:55.519Z,1510153615.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:55.896Z,1510153615.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:55.913Z,1510153615.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:56.296Z,1510153616.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:56.312Z,1510153616.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:56.685Z,1510153616.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:56.717Z,1510153616.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:57.076Z,1510153617.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:57.092Z,1510153617.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:57.476Z,1510153617.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:57.491Z,1510153617.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:57.905Z,1510153617.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:57.921Z,1510153617.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:58.288Z,1510153618.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:58.318Z,1510153618.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:58.963Z,1510153618.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:58.979Z,1510153618.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:59.077Z,1510153619.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:59.128Z,1510153619.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:59.504Z,1510153619.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:59.560Z,1510153619.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:06:59.904Z,1510153619.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:06:59.919Z,1510153619.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:00.305Z,1510153620.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:00.321Z,1510153620.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:00.683Z,1510153620.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:00.716Z,1510153620.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:01.083Z,1510153621.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:01.099Z,1510153621.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:01.484Z,1510153621.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:01.500Z,1510153621.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:01.915Z,1510153621.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:01.931Z,1510153621.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:02.283Z,1510153622.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:02.299Z,1510153622.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:02.693Z,1510153622.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:02.717Z,1510153622.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:03.382Z,1510153623.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:03.403Z,1510153623.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:03.534Z,1510153623.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:03.573Z,1510153623.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:03.945Z,1510153623.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:03.977Z,1510153623.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:04.345Z,1510153624.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:04.376Z,1510153624.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:04.745Z,1510153624.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:04.776Z,1510153624.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:05.132Z,1510153625.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:05.148Z,1510153625.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:05.535Z,1510153625.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:05.556Z,1510153625.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:05.962Z,1510153625.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:05.979Z,1510153625.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:06.345Z,1510153626.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:06.377Z,1510153626.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:07.027Z,1510153627.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:07.047Z,1510153627.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:07.187Z,1510153627.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:07.231Z,1510153627.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:07.605Z,1510153627.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:07.635Z,1510153627.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:08.002Z,1510153628.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:08.028Z,1510153628.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:08.401Z,1510153628.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:08.428Z,1510153628.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:08.788Z,1510153628.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:08.804Z,1510153628.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:09.192Z,1510153629.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:09.221Z,1510153629.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:09.592Z,1510153629.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:09.655Z,1510153629.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:10.013Z,1510153630.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:10.037Z,1510153630.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:10.390Z,1510153630.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:10.407Z,1510153630.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:10.801Z,1510153630.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:10.833Z,1510153630.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:11.487Z,1510153631.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:11.554Z,1510153631.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:11.658Z,1510153631.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:11.699Z,1510153631.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:12.080Z,1510153632.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:12.115Z,1510153632.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:12.487Z,1510153632.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:12.494Z,1510153632.494 [PNI_TCM](ERROR): CRC does not match. Expected:0x21774 got:0x986
2017-11-08T15:07:12.536Z,1510153632.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:12.882Z,1510153632.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:12.898Z,1510153632.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:13.265Z,1510153633.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:13.319Z,1510153633.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:13.664Z,1510153633.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:13.707Z,1510153633.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:14.093Z,1510153634.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:14.109Z,1510153634.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:14.482Z,1510153634.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:14.516Z,1510153634.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:15.150Z,1510153635.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:15.189Z,1510153635.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:15.309Z,1510153635.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:15.345Z,1510153635.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:15.722Z,1510153635.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:15.751Z,1510153635.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:16.117Z,1510153636.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:16.144Z,1510153636.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:16.518Z,1510153636.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:16.543Z,1510153636.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:16.909Z,1510153636.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:16.933Z,1510153636.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:17.307Z,1510153637.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:17.327Z,1510153637.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:17.704Z,1510153637.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:17.720Z,1510153637.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:18.136Z,1510153638.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:18.152Z,1510153638.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:18.511Z,1510153638.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:18.527Z,1510153638.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:18.921Z,1510153638.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:18.949Z,1510153638.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:19.635Z,1510153639.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:19.651Z,1510153639.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:19.758Z,1510153639.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:19.774Z,1510153639.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:20.178Z,1510153640.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:20.215Z,1510153640.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:20.574Z,1510153640.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:20.598Z,1510153640.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:20.974Z,1510153640.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:21.007Z,1510153641.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:21.367Z,1510153641.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:21.419Z,1510153641.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:21.794Z,1510153641.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:21.810Z,1510153641.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:22.174Z,1510153642.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:22.206Z,1510153642.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:22.860Z,1510153642.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:22.877Z,1510153642.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:23.010Z,1510153643.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:23.051Z,1510153643.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:23.421Z,1510153643.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:23.459Z,1510153643.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:23.817Z,1510153643.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:23.858Z,1510153643.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:24.217Z,1510153644.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:24.234Z,1510153644.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:24.610Z,1510153644.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:24.626Z,1510153644.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:25.006Z,1510153645.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:25.023Z,1510153645.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:25.407Z,1510153645.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:25.423Z,1510153645.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:25.829Z,1510153645.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:25.856Z,1510153645.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:26.206Z,1510153646.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:26.223Z,1510153646.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:26.614Z,1510153646.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:26.630Z,1510153646.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:27.296Z,1510153647.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:27.313Z,1510153647.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:27.430Z,1510153647.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:27.457Z,1510153647.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:27.834Z,1510153647.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:27.859Z,1510153647.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:28.237Z,1510153648.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:28.267Z,1510153648.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:28.646Z,1510153648.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:28.667Z,1510153648.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:29.023Z,1510153649.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:29.060Z,1510153649.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:29.424Z,1510153649.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:29.467Z,1510153649.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:29.855Z,1510153649.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:29.872Z,1510153649.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:30.242Z,1510153650.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:30.274Z,1510153650.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:30.918Z,1510153650.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:30.934Z,1510153650.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:31.053Z,1510153651.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:31.105Z,1510153651.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:31.466Z,1510153651.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:31.484Z,1510153651.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:31.869Z,1510153651.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:31.891Z,1510153651.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:32.270Z,1510153652.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:32.335Z,1510153652.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:32.659Z,1510153652.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:32.681Z,1510153652.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:33.058Z,1510153653.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:33.080Z,1510153653.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:33.462Z,1510153653.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:33.533Z,1510153653.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:33.882Z,1510153653.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:33.914Z,1510153653.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:34.258Z,1510153654.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:34.274Z,1510153654.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:34.671Z,1510153654.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:34.720Z,1510153654.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:35.353Z,1510153655.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:35.368Z,1510153655.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:35.481Z,1510153655.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:35.547Z,1510153655.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:35.907Z,1510153655.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:35.924Z,1510153655.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:36.307Z,1510153656.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:36.323Z,1510153656.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:36.705Z,1510153656.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:36.723Z,1510153656.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:37.088Z,1510153657.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:37.118Z,1510153657.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:37.488Z,1510153657.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:37.517Z,1510153657.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:37.916Z,1510153657.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:37.932Z,1510153657.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:38.307Z,1510153658.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:38.331Z,1510153658.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:38.970Z,1510153658.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:38.986Z,1510153658.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:39.109Z,1510153659.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:39.143Z,1510153659.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:39.518Z,1510153659.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:39.540Z,1510153659.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:39.921Z,1510153659.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:39.937Z,1510153659.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:40.319Z,1510153660.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:40.335Z,1510153660.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:40.709Z,1510153660.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:40.725Z,1510153660.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:41.113Z,1510153661.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:41.128Z,1510153661.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:41.514Z,1510153661.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:41.530Z,1510153661.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:41.929Z,1510153661.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:41.946Z,1510153661.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:42.313Z,1510153662.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:42.328Z,1510153662.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:42.719Z,1510153662.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:42.735Z,1510153662.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:43.408Z,1510153663.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:43.432Z,1510153663.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:43.537Z,1510153663.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:43.595Z,1510153663.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:43.963Z,1510153663.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:43.980Z,1510153663.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:44.363Z,1510153664.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:44.380Z,1510153664.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:44.759Z,1510153664.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:44.775Z,1510153664.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:45.144Z,1510153665.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:45.175Z,1510153665.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:45.544Z,1510153665.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:45.577Z,1510153665.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:45.967Z,1510153665.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:45.984Z,1510153665.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:46.364Z,1510153666.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:46.383Z,1510153666.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:47.037Z,1510153667.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:47.066Z,1510153667.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:47.181Z,1510153667.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:47.226Z,1510153667.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:47.608Z,1510153667.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:47.624Z,1510153667.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:48.004Z,1510153668.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:48.027Z,1510153668.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:48.393Z,1510153668.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:48.420Z,1510153668.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:48.787Z,1510153668.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:48.823Z,1510153668.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:49.187Z,1510153669.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:49.218Z,1510153669.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:49.588Z,1510153669.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:49.618Z,1510153669.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:50.018Z,1510153670.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:50.039Z,1510153670.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:50.387Z,1510153670.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:50.417Z,1510153670.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:50.807Z,1510153670.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:50.824Z,1510153670.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:51.474Z,1510153671.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:51.496Z,1510153671.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:51.628Z,1510153671.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:51.679Z,1510153671.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:52.038Z,1510153672.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:52.069Z,1510153672.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:52.441Z,1510153672.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:52.469Z,1510153672.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:52.838Z,1510153672.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:52.876Z,1510153672.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:53.226Z,1510153673.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:53.243Z,1510153673.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:53.627Z,1510153673.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:53.645Z,1510153673.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:54.050Z,1510153674.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:54.074Z,1510153674.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:54.437Z,1510153674.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:54.480Z,1510153674.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:55.112Z,1510153675.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:55.129Z,1510153675.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:55.243Z,1510153675.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:55.284Z,1510153675.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:55.654Z,1510153675.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:55.716Z,1510153675.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:56.053Z,1510153676.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:56.089Z,1510153676.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:56.460Z,1510153676.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:56.486Z,1510153676.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:56.843Z,1510153676.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:56.899Z,1510153676.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:57.243Z,1510153677.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:57.259Z,1510153677.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:57.646Z,1510153677.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:57.699Z,1510153677.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:58.070Z,1510153678.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:58.086Z,1510153678.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:58.442Z,1510153678.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:58.481Z,1510153678.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:58.853Z,1510153678.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:58.889Z,1510153678.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:59.538Z,1510153679.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:59.553Z,1510153679.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:07:59.691Z,1510153679.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:07:59.707Z,1510153679.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:00.099Z,1510153680.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:00.116Z,1510153680.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:00.498Z,1510153680.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:00.513Z,1510153680.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:00.894Z,1510153680.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:00.910Z,1510153680.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:01.288Z,1510153681.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:01.312Z,1510153681.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:01.691Z,1510153681.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:01.707Z,1510153681.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:02.105Z,1510153682.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:02.130Z,1510153682.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:02.498Z,1510153682.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:02.514Z,1510153682.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:03.172Z,1510153683.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:03.188Z,1510153683.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:03.304Z,1510153683.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:03.329Z,1510153683.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:03.732Z,1510153683.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:03.748Z,1510153683.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:04.121Z,1510153684.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:04.146Z,1510153684.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:04.517Z,1510153684.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:04.555Z,1510153684.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:04.909Z,1510153684.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:04.945Z,1510153684.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:05.311Z,1510153685.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:05.345Z,1510153685.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:05.704Z,1510153685.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:05.749Z,1510153685.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:06.139Z,1510153686.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:06.156Z,1510153686.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:06.508Z,1510153686.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:06.524Z,1510153686.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:06.933Z,1510153686.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:06.949Z,1510153686.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:07.598Z,1510153687.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:07.615Z,1510153687.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:07.745Z,1510153687.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:07.762Z,1510153687.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:08.149Z,1510153688.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:08.172Z,1510153688.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:08.550Z,1510153688.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:08.566Z,1510153688.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:08.946Z,1510153688.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:08.962Z,1510153688.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:09.342Z,1510153689.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:09.358Z,1510153689.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:09.762Z,1510153689.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:09.791Z,1510153689.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:10.149Z,1510153690.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:10.166Z,1510153690.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:10.814Z,1510153690.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:10.843Z,1510153690.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:10.959Z,1510153690.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:10.992Z,1510153690.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:11.370Z,1510153691.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:11.403Z,1510153691.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:11.770Z,1510153691.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:11.796Z,1510153691.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:12.174Z,1510153692.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:12.204Z,1510153692.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:12.559Z,1510153692.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:12.576Z,1510153692.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:12.958Z,1510153692.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:12.974Z,1510153692.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:13.359Z,1510153693.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:13.376Z,1510153693.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:13.785Z,1510153693.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:13.808Z,1510153693.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:14.158Z,1510153694.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:14.176Z,1510153694.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:14.574Z,1510153694.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:14.598Z,1510153694.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:15.251Z,1510153695.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:15.275Z,1510153695.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:15.415Z,1510153695.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:15.432Z,1510153695.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:15.830Z,1510153695.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:15.856Z,1510153695.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:16.228Z,1510153696.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:16.249Z,1510153696.249 [BPC1](ERROR): Failed to parse message.
2017-11-08T15:08:16.249Z,1510153696.249 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T15:08:16.249Z,1510153696.249 [BPC1] Data Fault, FailCount= 1
2017-11-08T15:08:16.250Z,1510153696.250 [BPC1](ERROR): Data Fault
2017-11-08T15:08:16.259Z,1510153696.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:16.341Z,1510153696.341 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T15:08:16.628Z,1510153696.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:16.665Z,1510153696.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:17.019Z,1510153697.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:17.039Z,1510153697.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:17.419Z,1510153697.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:17.435Z,1510153697.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:17.533Z,1510153697.533 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T15:08:17.533Z,1510153697.533 [BPC1] No Fault, FailCount= 1
2017-11-08T15:08:17.837Z,1510153697.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:17.919Z,1510153697.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:18.229Z,1510153698.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:18.262Z,1510153698.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:18.945Z,1510153698.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:18.966Z,1510153698.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:19.078Z,1510153699.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:19.128Z,1510153699.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:19.502Z,1510153699.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:19.523Z,1510153699.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:19.904Z,1510153699.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:19.919Z,1510153699.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:20.305Z,1510153700.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:20.321Z,1510153700.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:20.679Z,1510153700.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:20.718Z,1510153700.718 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:20.718Z,1510153700.718 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2017-11-08T15:08:20.718Z,1510153700.718 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T15:08:20.720Z,1510153700.720 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:20.720Z,1510153700.720 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35
2017-11-08T15:08:20.720Z,1510153700.720 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T15:08:20.722Z,1510153700.722 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:20.722Z,1510153700.722 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 35
2017-11-08T15:08:20.722Z,1510153700.722 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T15:08:20.797Z,1510153700.797 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T15:08:20.797Z,1510153700.797 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T15:08:20.798Z,1510153700.798 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T15:08:21.083Z,1510153701.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:21.206Z,1510153701.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T15:08:21.206Z,1510153701.206 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2017-11-08T15:08:21.207Z,1510153701.207 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T15:08:21.207Z,1510153701.207 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35
2017-11-08T15:08:21.207Z,1510153701.207 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T15:08:21.207Z,1510153701.207 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 35
2017-11-08T15:08:21.480Z,1510153701.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:21.495Z,1510153701.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T15:08:21.496Z,1510153701.496 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:08:21.496Z,1510153701.496 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:08:21.497Z,1510153701.497 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T15:08:21.497Z,1510153701.497 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:08:21.497Z,1510153701.497 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:08:21.498Z,1510153701.498 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T15:08:21.498Z,1510153701.498 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:08:21.498Z,1510153701.498 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:08:21.909Z,1510153701.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:21.932Z,1510153701.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T15:08:21.933Z,1510153701.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:22.293Z,1510153702.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:22.325Z,1510153702.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T15:08:22.326Z,1510153702.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:22.965Z,1510153702.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:22.987Z,1510153702.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s.
2017-11-08T15:08:22.988Z,1510153702.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:23.099Z,1510153703.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:23.147Z,1510153703.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T15:08:23.148Z,1510153703.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:23.514Z,1510153703.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:23.534Z,1510153703.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T15:08:23.535Z,1510153703.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:23.916Z,1510153703.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:23.932Z,1510153703.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T15:08:23.933Z,1510153703.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:24.320Z,1510153704.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:24.335Z,1510153704.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T15:08:24.336Z,1510153704.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:24.699Z,1510153704.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:24.727Z,1510153704.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T15:08:24.728Z,1510153704.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:25.095Z,1510153705.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:25.123Z,1510153705.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T15:08:25.124Z,1510153705.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:25.500Z,1510153705.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:25.533Z,1510153705.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T15:08:25.534Z,1510153705.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:25.923Z,1510153705.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:25.979Z,1510153705.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-08T15:08:25.980Z,1510153705.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:26.320Z,1510153706.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:26.336Z,1510153706.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T15:08:26.337Z,1510153706.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:26.998Z,1510153706.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:27.026Z,1510153707.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2017-11-08T15:08:27.027Z,1510153707.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:27.143Z,1510153707.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:27.186Z,1510153707.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-08T15:08:27.187Z,1510153707.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:27.556Z,1510153707.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:27.590Z,1510153707.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T15:08:27.591Z,1510153707.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:27.964Z,1510153707.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:27.980Z,1510153707.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-08T15:08:27.981Z,1510153707.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:28.353Z,1510153708.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:28.379Z,1510153708.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T15:08:28.380Z,1510153708.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:28.743Z,1510153708.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:28.780Z,1510153708.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T15:08:28.781Z,1510153708.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:29.143Z,1510153709.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:29.175Z,1510153709.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T15:08:29.176Z,1510153709.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:29.544Z,1510153709.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:29.560Z,1510153709.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T15:08:29.561Z,1510153709.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:29.971Z,1510153709.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:29.991Z,1510153709.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T15:08:29.991Z,1510153709.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:30.345Z,1510153710.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:30.361Z,1510153710.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T15:08:30.362Z,1510153710.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:30.761Z,1510153710.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:30.811Z,1510153710.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T15:08:30.812Z,1510153710.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:31.428Z,1510153711.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:31.444Z,1510153711.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2017-11-08T15:08:31.445Z,1510153711.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:31.563Z,1510153711.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:31.611Z,1510153711.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T15:08:31.612Z,1510153711.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:31.979Z,1510153711.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:31.995Z,1510153711.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T15:08:31.996Z,1510153711.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:32.380Z,1510153712.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:32.395Z,1510153712.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T15:08:32.396Z,1510153712.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:32.784Z,1510153712.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:32.800Z,1510153712.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T15:08:32.801Z,1510153712.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:33.163Z,1510153713.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:33.187Z,1510153713.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T15:08:33.189Z,1510153713.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:33.564Z,1510153713.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:33.588Z,1510153713.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T15:08:33.589Z,1510153713.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:33.990Z,1510153713.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:34.011Z,1510153714.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T15:08:34.012Z,1510153714.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:34.383Z,1510153714.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:34.400Z,1510153714.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T15:08:34.401Z,1510153714.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:35.044Z,1510153715.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:35.060Z,1510153715.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2017-11-08T15:08:35.061Z,1510153715.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:35.195Z,1510153715.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:35.235Z,1510153715.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T15:08:35.236Z,1510153715.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:35.606Z,1510153715.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:35.638Z,1510153715.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T15:08:35.639Z,1510153715.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:36.000Z,1510153716.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:36.016Z,1510153716.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T15:08:36.017Z,1510153716.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:36.402Z,1510153716.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:36.418Z,1510153716.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T15:08:36.419Z,1510153716.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:36.793Z,1510153716.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:36.809Z,1510153716.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T15:08:36.810Z,1510153716.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:37.190Z,1510153717.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:37.206Z,1510153717.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T15:08:37.207Z,1510153717.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:37.594Z,1510153717.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:37.611Z,1510153717.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T15:08:37.611Z,1510153717.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:38.010Z,1510153718.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:38.047Z,1510153718.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T15:08:38.048Z,1510153718.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:38.383Z,1510153718.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:38.432Z,1510153718.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T15:08:38.445Z,1510153718.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:38.807Z,1510153718.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:38.827Z,1510153718.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T15:08:38.828Z,1510153718.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:39.484Z,1510153719.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:39.532Z,1510153719.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T15:08:39.533Z,1510153719.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:39.668Z,1510153719.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:39.684Z,1510153719.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-08T15:08:39.693Z,1510153719.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:40.087Z,1510153720.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:40.145Z,1510153720.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-08T15:08:40.146Z,1510153720.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:40.487Z,1510153720.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:40.511Z,1510153720.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-08T15:08:40.512Z,1510153720.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:40.883Z,1510153720.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:40.919Z,1510153720.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:41.274Z,1510153721.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:41.306Z,1510153721.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:41.671Z,1510153721.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:41.710Z,1510153721.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:42.101Z,1510153722.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:42.118Z,1510153722.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:42.486Z,1510153722.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:42.520Z,1510153722.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:43.157Z,1510153723.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:43.173Z,1510153723.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:43.273Z,1510153723.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:43.324Z,1510153723.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:43.698Z,1510153723.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:43.728Z,1510153723.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:44.093Z,1510153724.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:44.118Z,1510153724.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:44.489Z,1510153724.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:44.523Z,1510153724.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:44.879Z,1510153724.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:44.919Z,1510153724.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:45.281Z,1510153725.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:45.288Z,1510153725.288 [PNI_TCM](ERROR): CRC does not match. Expected:0x39945 got:0x988
2017-11-08T15:08:45.321Z,1510153725.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:45.678Z,1510153725.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:45.694Z,1510153725.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:46.110Z,1510153726.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:46.126Z,1510153726.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:46.475Z,1510153726.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:46.517Z,1510153726.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:46.894Z,1510153726.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:46.927Z,1510153726.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:47.574Z,1510153727.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:47.595Z,1510153727.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:47.730Z,1510153727.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:47.747Z,1510153727.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:48.136Z,1510153728.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:48.191Z,1510153728.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:48.537Z,1510153728.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:48.570Z,1510153728.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:48.937Z,1510153728.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:48.954Z,1510153728.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:49.327Z,1510153729.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:49.347Z,1510153729.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:49.750Z,1510153729.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:49.774Z,1510153729.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:50.138Z,1510153730.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:50.154Z,1510153730.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:50.803Z,1510153730.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:50.826Z,1510153730.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:50.939Z,1510153730.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:50.987Z,1510153730.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:51.350Z,1510153731.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:51.376Z,1510153731.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:51.753Z,1510153731.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:51.779Z,1510153731.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:52.154Z,1510153732.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:52.184Z,1510153732.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:52.539Z,1510153732.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:52.579Z,1510153732.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:52.939Z,1510153732.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:52.955Z,1510153732.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:53.343Z,1510153733.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:53.363Z,1510153733.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:53.771Z,1510153733.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:53.787Z,1510153733.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:54.142Z,1510153734.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:54.158Z,1510153734.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:54.552Z,1510153734.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:54.587Z,1510153734.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:55.233Z,1510153735.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:55.255Z,1510153735.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:55.390Z,1510153735.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:55.406Z,1510153735.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:55.801Z,1510153735.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:55.817Z,1510153735.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:56.200Z,1510153736.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:56.217Z,1510153736.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:56.600Z,1510153736.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:56.624Z,1510153736.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:56.980Z,1510153736.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:57.011Z,1510153737.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:57.380Z,1510153737.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:57.410Z,1510153737.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:57.812Z,1510153737.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:57.832Z,1510153737.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:58.199Z,1510153738.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:58.215Z,1510153738.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:58.902Z,1510153738.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:58.936Z,1510153738.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:59.070Z,1510153739.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:59.120Z,1510153739.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:59.496Z,1510153739.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:59.513Z,1510153739.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:08:59.896Z,1510153739.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:08:59.912Z,1510153739.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:00.297Z,1510153740.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:00.339Z,1510153740.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:00.675Z,1510153740.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:00.692Z,1510153740.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:01.075Z,1510153741.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:01.124Z,1510153741.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:01.476Z,1510153741.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:01.492Z,1510153741.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:01.907Z,1510153741.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:01.967Z,1510153741.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:02.275Z,1510153742.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:02.295Z,1510153742.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:02.685Z,1510153742.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:02.714Z,1510153742.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:03.374Z,1510153743.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:03.396Z,1510153743.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:03.523Z,1510153743.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:03.561Z,1510153743.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:03.933Z,1510153743.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:03.971Z,1510153743.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:04.330Z,1510153744.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:04.346Z,1510153744.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:04.726Z,1510153744.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:04.742Z,1510153744.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:05.122Z,1510153745.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:05.138Z,1510153745.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:05.526Z,1510153745.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:05.548Z,1510153745.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:05.937Z,1510153745.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:05.962Z,1510153745.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:06.333Z,1510153746.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:06.349Z,1510153746.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:07.017Z,1510153747.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:07.033Z,1510153747.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:07.134Z,1510153747.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:07.179Z,1510153747.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:07.561Z,1510153747.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:07.577Z,1510153747.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:07.960Z,1510153747.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:07.976Z,1510153747.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:08.345Z,1510153748.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:08.372Z,1510153748.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:08.739Z,1510153748.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:08.775Z,1510153748.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:09.139Z,1510153749.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:09.173Z,1510153749.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:09.536Z,1510153749.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:09.552Z,1510153749.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:09.972Z,1510153749.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:10.021Z,1510153750.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:10.339Z,1510153750.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:10.379Z,1510153750.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:10.749Z,1510153750.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:10.777Z,1510153750.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:11.464Z,1510153751.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:11.481Z,1510153751.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:11.595Z,1510153751.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:11.631Z,1510153751.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:12.012Z,1510153752.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:12.029Z,1510153752.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:12.413Z,1510153752.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:12.428Z,1510153752.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:12.815Z,1510153752.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:12.831Z,1510153752.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:13.195Z,1510153753.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:13.226Z,1510153753.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:13.596Z,1510153753.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:13.626Z,1510153753.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:14.026Z,1510153754.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:14.047Z,1510153754.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:14.414Z,1510153754.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:14.435Z,1510153754.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:15.076Z,1510153755.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:15.099Z,1510153755.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:15.238Z,1510153755.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:15.279Z,1510153755.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:15.642Z,1510153755.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:15.675Z,1510153755.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:16.045Z,1510153756.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:16.087Z,1510153756.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:16.446Z,1510153756.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:16.481Z,1510153756.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:16.834Z,1510153756.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:16.851Z,1510153756.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:17.230Z,1510153757.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:17.251Z,1510153757.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:17.635Z,1510153757.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:17.656Z,1510153757.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:18.059Z,1510153758.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:18.084Z,1510153758.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:18.434Z,1510153758.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:18.477Z,1510153758.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:18.844Z,1510153758.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:18.877Z,1510153758.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:19.529Z,1510153759.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:19.545Z,1510153759.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:19.645Z,1510153759.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:19.691Z,1510153759.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:20.072Z,1510153760.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:20.108Z,1510153760.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:20.461Z,1510153760.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:20.494Z,1510153760.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:20.875Z,1510153760.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:20.892Z,1510153760.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:21.251Z,1510153761.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:21.307Z,1510153761.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:21.652Z,1510153761.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:21.692Z,1510153761.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:22.081Z,1510153762.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:22.147Z,1510153762.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:22.467Z,1510153762.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:22.503Z,1510153762.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:23.137Z,1510153763.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:23.186Z,1510153763.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:23.304Z,1510153763.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:23.332Z,1510153763.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:23.728Z,1510153763.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:23.785Z,1510153763.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:24.128Z,1510153764.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:24.144Z,1510153764.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:24.517Z,1510153764.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:24.552Z,1510153764.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:24.911Z,1510153764.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:24.942Z,1510153764.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:25.311Z,1510153765.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:25.342Z,1510153765.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:25.704Z,1510153765.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:25.720Z,1510153765.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:26.139Z,1510153766.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:26.156Z,1510153766.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:26.508Z,1510153766.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:26.524Z,1510153766.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:26.917Z,1510153766.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:26.950Z,1510153766.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:27.598Z,1510153767.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:27.614Z,1510153767.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:27.712Z,1510153767.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:27.741Z,1510153767.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:28.141Z,1510153768.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:28.156Z,1510153768.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:28.540Z,1510153768.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:28.556Z,1510153768.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:28.929Z,1510153768.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:28.959Z,1510153768.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:29.326Z,1510153769.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:29.360Z,1510153769.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:29.750Z,1510153769.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:29.766Z,1510153769.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:30.134Z,1510153770.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:30.157Z,1510153770.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:30.803Z,1510153770.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:30.824Z,1510153770.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:30.936Z,1510153770.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:30.965Z,1510153770.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:31.351Z,1510153771.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:31.368Z,1510153771.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:31.755Z,1510153771.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:31.810Z,1510153771.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:32.156Z,1510153772.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:32.173Z,1510153772.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:32.535Z,1510153772.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:32.561Z,1510153772.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:32.935Z,1510153772.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:32.960Z,1510153772.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:33.336Z,1510153773.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:33.361Z,1510153773.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:33.762Z,1510153773.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:33.779Z,1510153773.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:34.131Z,1510153774.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:34.163Z,1510153774.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:34.555Z,1510153774.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:34.572Z,1510153774.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:35.222Z,1510153775.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:35.239Z,1510153775.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:35.371Z,1510153775.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:35.387Z,1510153775.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:35.790Z,1510153775.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:35.816Z,1510153775.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:36.189Z,1510153776.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:36.216Z,1510153776.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:36.586Z,1510153776.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:36.618Z,1510153776.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:36.980Z,1510153776.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:37.025Z,1510153777.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:37.380Z,1510153777.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:37.396Z,1510153777.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:37.797Z,1510153777.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:37.830Z,1510153777.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:38.188Z,1510153778.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:38.221Z,1510153778.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:38.855Z,1510153778.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:38.881Z,1510153778.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:38.987Z,1510153778.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:39.039Z,1510153779.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:39.409Z,1510153779.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:39.440Z,1510153779.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:39.809Z,1510153779.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:39.839Z,1510153779.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:40.210Z,1510153780.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:40.283Z,1510153780.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:40.595Z,1510153780.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:40.635Z,1510153780.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:40.995Z,1510153780.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:41.015Z,1510153781.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:41.392Z,1510153781.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:41.408Z,1510153781.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:41.827Z,1510153781.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:41.844Z,1510153781.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:42.195Z,1510153782.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:42.211Z,1510153782.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:42.609Z,1510153782.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:42.663Z,1510153782.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:43.285Z,1510153783.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:43.301Z,1510153783.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:43.411Z,1510153783.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:43.460Z,1510153783.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:43.832Z,1510153783.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:43.893Z,1510153783.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:44.231Z,1510153784.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:44.247Z,1510153784.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:44.628Z,1510153784.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:44.651Z,1510153784.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:45.012Z,1510153785.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:45.052Z,1510153785.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:45.412Z,1510153785.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:45.444Z,1510153785.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:45.836Z,1510153785.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:45.895Z,1510153785.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:46.232Z,1510153786.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:46.251Z,1510153786.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:46.942Z,1510153786.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:46.963Z,1510153786.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:47.098Z,1510153787.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:47.138Z,1510153787.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:47.509Z,1510153787.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:47.541Z,1510153787.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:47.909Z,1510153787.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:47.941Z,1510153787.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:48.309Z,1510153788.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:48.340Z,1510153788.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:48.698Z,1510153788.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:48.714Z,1510153788.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:49.098Z,1510153789.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:49.114Z,1510153789.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:49.498Z,1510153789.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:49.515Z,1510153789.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:49.927Z,1510153789.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:49.943Z,1510153789.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:50.309Z,1510153790.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:50.340Z,1510153790.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:50.977Z,1510153790.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:50.994Z,1510153790.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:51.107Z,1510153791.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:51.141Z,1510153791.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:51.528Z,1510153791.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:51.545Z,1510153791.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:51.928Z,1510153791.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:51.944Z,1510153791.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:52.325Z,1510153792.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:52.355Z,1510153792.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:52.710Z,1510153792.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:52.726Z,1510153792.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:53.106Z,1510153793.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:53.122Z,1510153793.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:53.508Z,1510153793.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:53.536Z,1510153793.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:53.934Z,1510153793.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:53.987Z,1510153793.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:54.323Z,1510153794.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:54.339Z,1510153794.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:54.990Z,1510153794.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:55.018Z,1510153795.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:55.136Z,1510153795.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:55.179Z,1510153795.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:55.546Z,1510153795.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:55.571Z,1510153795.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:55.949Z,1510153795.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:55.974Z,1510153795.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:56.350Z,1510153796.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:56.384Z,1510153796.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:56.735Z,1510153796.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:56.767Z,1510153796.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:57.135Z,1510153797.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:57.151Z,1510153797.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:57.535Z,1510153797.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:57.556Z,1510153797.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:57.958Z,1510153797.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:57.981Z,1510153797.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:58.339Z,1510153798.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:58.355Z,1510153798.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:58.750Z,1510153798.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:58.780Z,1510153798.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:59.427Z,1510153799.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:59.443Z,1510153799.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:59.553Z,1510153799.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:59.591Z,1510153799.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:09:59.979Z,1510153799.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:09:59.996Z,1510153799.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:00.379Z,1510153800.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:00.395Z,1510153800.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:00.779Z,1510153800.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:00.796Z,1510153800.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:01.160Z,1510153801.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:01.193Z,1510153801.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:01.560Z,1510153801.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:01.591Z,1510153801.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:01.992Z,1510153801.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:02.008Z,1510153802.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:02.384Z,1510153802.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:02.400Z,1510153802.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:03.042Z,1510153803.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:03.058Z,1510153803.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:03.195Z,1510153803.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:03.243Z,1510153803.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:03.606Z,1510153803.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:03.636Z,1510153803.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:04.005Z,1510153804.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:04.036Z,1510153804.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:04.410Z,1510153804.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:04.435Z,1510153804.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:04.795Z,1510153804.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:04.845Z,1510153804.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:05.197Z,1510153805.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:05.214Z,1510153805.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:05.600Z,1510153805.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:05.616Z,1510153805.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:06.017Z,1510153806.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:06.083Z,1510153806.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:06.397Z,1510153806.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:06.413Z,1510153806.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:06.806Z,1510153806.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:06.867Z,1510153806.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:07.491Z,1510153807.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:07.512Z,1510153807.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:07.623Z,1510153807.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:07.695Z,1510153807.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:08.049Z,1510153808.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:08.065Z,1510153808.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:08.444Z,1510153808.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:08.461Z,1510153808.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:08.837Z,1510153808.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:08.853Z,1510153808.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:09.225Z,1510153809.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:09.251Z,1510153809.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:09.625Z,1510153809.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:09.651Z,1510153809.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:10.050Z,1510153810.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:10.066Z,1510153810.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:10.446Z,1510153810.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:10.472Z,1510153810.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:11.118Z,1510153811.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:11.146Z,1510153811.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:11.259Z,1510153811.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:11.310Z,1510153811.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:11.692Z,1510153811.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:11.707Z,1510153811.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:12.085Z,1510153812.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:12.107Z,1510153812.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:12.471Z,1510153812.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:12.500Z,1510153812.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:12.864Z,1510153812.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:12.902Z,1510153812.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:13.264Z,1510153813.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:13.304Z,1510153813.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:13.671Z,1510153813.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:13.700Z,1510153813.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:14.093Z,1510153814.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:14.109Z,1510153814.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:14.467Z,1510153814.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:14.507Z,1510153814.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:14.884Z,1510153814.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:14.909Z,1510153814.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:15.548Z,1510153815.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:15.564Z,1510153815.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:15.697Z,1510153815.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:15.746Z,1510153815.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:16.112Z,1510153816.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:16.136Z,1510153816.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:16.513Z,1510153816.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:16.529Z,1510153816.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:16.914Z,1510153816.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:16.930Z,1510153816.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:17.300Z,1510153817.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:17.323Z,1510153817.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:17.702Z,1510153817.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:17.718Z,1510153817.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:18.126Z,1510153818.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:18.155Z,1510153818.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:18.514Z,1510153818.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:18.530Z,1510153818.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:19.173Z,1510153819.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:19.209Z,1510153819.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:19.328Z,1510153819.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:19.367Z,1510153819.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:19.750Z,1510153819.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:19.766Z,1510153819.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:20.146Z,1510153820.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:20.162Z,1510153820.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:20.550Z,1510153820.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:20.566Z,1510153820.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:20.927Z,1510153820.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:20.963Z,1510153820.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:21.328Z,1510153821.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:21.360Z,1510153821.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:21.760Z,1510153821.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:21.784Z,1510153821.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:22.127Z,1510153822.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:22.164Z,1510153822.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:22.523Z,1510153822.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:22.548Z,1510153822.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:22.953Z,1510153822.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:22.971Z,1510153822.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:23.654Z,1510153823.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:23.673Z,1510153823.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:23.781Z,1510153823.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:23.812Z,1510153823.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:24.201Z,1510153824.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:24.217Z,1510153824.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:24.604Z,1510153824.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:24.620Z,1510153824.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:25.002Z,1510153825.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:25.018Z,1510153825.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:25.380Z,1510153825.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:25.410Z,1510153825.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:25.780Z,1510153825.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:25.814Z,1510153825.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:26.180Z,1510153826.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:26.237Z,1510153826.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:26.581Z,1510153826.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:26.610Z,1510153826.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:27.008Z,1510153827.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:27.025Z,1510153827.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:27.390Z,1510153827.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:27.448Z,1510153827.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:28.074Z,1510153828.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:28.090Z,1510153828.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:28.200Z,1510153828.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:28.247Z,1510153828.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:28.622Z,1510153828.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:28.670Z,1510153828.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:29.021Z,1510153829.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:29.038Z,1510153829.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:29.413Z,1510153829.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:29.475Z,1510153829.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:29.799Z,1510153829.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:29.832Z,1510153829.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:30.203Z,1510153830.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:30.235Z,1510153830.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:30.600Z,1510153830.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:30.627Z,1510153830.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:31.028Z,1510153831.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:31.044Z,1510153831.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:31.400Z,1510153831.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:31.426Z,1510153831.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:31.820Z,1510153831.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:31.837Z,1510153831.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:32.483Z,1510153832.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:32.499Z,1510153832.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:32.638Z,1510153832.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:32.679Z,1510153832.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:33.050Z,1510153833.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:33.083Z,1510153833.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:33.450Z,1510153833.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:33.478Z,1510153833.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:33.850Z,1510153833.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:33.883Z,1510153833.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:34.238Z,1510153834.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:34.266Z,1510153834.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:34.636Z,1510153834.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:34.652Z,1510153834.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:35.058Z,1510153835.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:35.091Z,1510153835.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:35.457Z,1510153835.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:35.484Z,1510153835.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:36.123Z,1510153836.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:36.139Z,1510153836.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:36.249Z,1510153836.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:36.291Z,1510153836.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:36.672Z,1510153836.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:36.689Z,1510153836.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:37.077Z,1510153837.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:37.093Z,1510153837.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:37.470Z,1510153837.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:37.523Z,1510153837.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:37.855Z,1510153837.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:37.894Z,1510153837.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:38.251Z,1510153838.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:38.288Z,1510153838.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:38.657Z,1510153838.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:38.688Z,1510153838.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:39.082Z,1510153839.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:39.099Z,1510153839.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:39.451Z,1510153839.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:39.484Z,1510153839.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:39.864Z,1510153839.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:39.889Z,1510153839.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:40.590Z,1510153840.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:40.606Z,1510153840.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:40.744Z,1510153840.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:40.791Z,1510153840.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:41.154Z,1510153841.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:41.187Z,1510153841.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:41.558Z,1510153841.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:41.591Z,1510153841.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:41.950Z,1510153841.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:41.978Z,1510153841.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:42.343Z,1510153842.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:42.360Z,1510153842.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:42.766Z,1510153842.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:42.790Z,1510153842.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:43.149Z,1510153843.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:43.166Z,1510153843.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:43.832Z,1510153843.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:43.848Z,1510153843.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:43.950Z,1510153843.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:44.001Z,1510153844.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:44.382Z,1510153844.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:44.399Z,1510153844.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:44.766Z,1510153844.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:44.800Z,1510153844.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:45.182Z,1510153845.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:45.198Z,1510153845.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:45.557Z,1510153845.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:45.593Z,1510153845.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:45.957Z,1510153845.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:45.973Z,1510153845.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:46.357Z,1510153846.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:46.373Z,1510153846.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:46.781Z,1510153846.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:46.811Z,1510153846.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:47.159Z,1510153847.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:47.176Z,1510153847.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:47.570Z,1510153847.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:47.598Z,1510153847.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:48.248Z,1510153848.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:48.264Z,1510153848.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:48.369Z,1510153848.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:48.420Z,1510153848.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:48.794Z,1510153848.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:48.877Z,1510153848.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:49.198Z,1510153849.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:49.214Z,1510153849.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:49.586Z,1510153849.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:49.651Z,1510153849.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:49.975Z,1510153849.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:49.992Z,1510153849.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:50.376Z,1510153850.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:50.420Z,1510153850.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:50.807Z,1510153850.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:50.824Z,1510153850.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:51.189Z,1510153851.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:51.258Z,1510153851.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:51.901Z,1510153851.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:51.916Z,1510153851.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:52.029Z,1510153852.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:52.079Z,1510153852.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:52.455Z,1510153852.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:52.474Z,1510153852.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:52.855Z,1510153852.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:52.881Z,1510153852.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:53.253Z,1510153853.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:53.279Z,1510153853.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:53.636Z,1510153853.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:53.681Z,1510153853.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:54.031Z,1510153854.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:54.048Z,1510153854.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:54.436Z,1510153854.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:54.469Z,1510153854.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:54.862Z,1510153854.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:54.889Z,1510153854.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:55.235Z,1510153855.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:55.252Z,1510153855.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:55.645Z,1510153855.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:55.682Z,1510153855.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:56.331Z,1510153856.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:56.351Z,1510153856.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:56.449Z,1510153856.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:56.499Z,1510153856.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:56.877Z,1510153856.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:56.900Z,1510153856.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:57.278Z,1510153857.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:57.294Z,1510153857.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:57.666Z,1510153857.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:57.708Z,1510153857.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:58.055Z,1510153858.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:58.094Z,1510153858.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:58.456Z,1510153858.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:58.495Z,1510153858.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:58.885Z,1510153858.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:58.902Z,1510153858.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:59.277Z,1510153859.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:59.335Z,1510153859.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:10:59.941Z,1510153859.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:10:59.948Z,1510153859.948 [PNI_TCM](ERROR): CRC does not match. Expected:0x32091 got:0x3863
2017-11-08T15:10:59.985Z,1510153859.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:00.100Z,1510153860.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:00.116Z,1510153860.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:00.518Z,1510153860.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:00.551Z,1510153860.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:00.918Z,1510153860.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:00.943Z,1510153860.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:01.330Z,1510153861.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:01.347Z,1510153861.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:01.703Z,1510153861.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:01.720Z,1510153861.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:02.103Z,1510153862.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:02.124Z,1510153862.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:02.506Z,1510153862.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:02.523Z,1510153862.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:02.935Z,1510153862.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:02.951Z,1510153862.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:03.307Z,1510153863.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:03.327Z,1510153863.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:03.713Z,1510153863.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:03.742Z,1510153863.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:04.399Z,1510153864.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:04.419Z,1510153864.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:04.547Z,1510153864.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:04.563Z,1510153864.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:04.956Z,1510153864.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:04.976Z,1510153864.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:05.355Z,1510153865.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:05.376Z,1510153865.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:05.755Z,1510153865.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:05.772Z,1510153865.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:06.139Z,1510153866.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:06.168Z,1510153866.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:06.542Z,1510153866.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:06.558Z,1510153866.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:06.957Z,1510153866.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:06.975Z,1510153866.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:07.355Z,1510153867.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:07.377Z,1510153867.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:08.030Z,1510153868.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:08.055Z,1510153868.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:08.162Z,1510153868.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:08.179Z,1510153868.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:08.583Z,1510153868.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:08.624Z,1510153868.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:08.982Z,1510153868.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:09.009Z,1510153869.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:09.378Z,1510153869.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:09.405Z,1510153869.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:09.768Z,1510153869.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:09.784Z,1510153869.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:10.167Z,1510153870.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:10.211Z,1510153870.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:10.573Z,1510153870.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:10.589Z,1510153870.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:10.993Z,1510153870.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:11.018Z,1510153871.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:11.371Z,1510153871.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:11.448Z,1510153871.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:11.781Z,1510153871.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:11.798Z,1510153871.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:12.457Z,1510153872.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:12.496Z,1510153872.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:12.636Z,1510153872.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:12.665Z,1510153872.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:13.046Z,1510153873.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:13.095Z,1510153873.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:13.449Z,1510153873.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:13.479Z,1510153873.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:13.842Z,1510153873.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:13.874Z,1510153873.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:14.240Z,1510153874.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:14.282Z,1510153874.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:14.634Z,1510153874.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:14.650Z,1510153874.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:15.050Z,1510153875.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:15.078Z,1510153875.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:15.444Z,1510153875.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:15.461Z,1510153875.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:16.113Z,1510153876.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:16.134Z,1510153876.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:16.249Z,1510153876.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:16.295Z,1510153876.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:16.670Z,1510153876.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:16.691Z,1510153876.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:17.078Z,1510153877.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:17.094Z,1510153877.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:17.474Z,1510153877.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:17.490Z,1510153877.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:17.855Z,1510153877.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:17.887Z,1510153877.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:18.251Z,1510153878.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:18.290Z,1510153878.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:18.652Z,1510153878.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:18.689Z,1510153878.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:19.084Z,1510153879.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:19.100Z,1510153879.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:19.451Z,1510153879.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:19.467Z,1510153879.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:19.866Z,1510153879.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:19.892Z,1510153879.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:20.554Z,1510153880.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:20.570Z,1510153880.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:20.702Z,1510153880.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:20.751Z,1510153880.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:21.126Z,1510153881.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:21.183Z,1510153881.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:21.528Z,1510153881.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:21.551Z,1510153881.551 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:21.551Z,1510153881.551 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2017-11-08T15:11:21.551Z,1510153881.551 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T15:11:21.553Z,1510153881.553 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:21.553Z,1510153881.553 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36
2017-11-08T15:11:21.553Z,1510153881.553 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T15:11:21.555Z,1510153881.555 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:21.555Z,1510153881.555 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 36
2017-11-08T15:11:21.555Z,1510153881.555 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T15:11:21.633Z,1510153881.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T15:11:21.633Z,1510153881.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T15:11:21.633Z,1510153881.633 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T15:11:21.918Z,1510153881.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:22.025Z,1510153882.025 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T15:11:22.025Z,1510153882.025 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2017-11-08T15:11:22.025Z,1510153882.025 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T15:11:22.026Z,1510153882.026 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36
2017-11-08T15:11:22.026Z,1510153882.026 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T15:11:22.026Z,1510153882.026 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 36
2017-11-08T15:11:22.306Z,1510153882.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:22.322Z,1510153882.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T15:11:22.323Z,1510153882.323 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:11:22.323Z,1510153882.323 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:11:22.323Z,1510153882.323 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T15:11:22.324Z,1510153882.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:11:22.324Z,1510153882.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:11:22.325Z,1510153882.325 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T15:11:22.325Z,1510153882.325 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:11:22.325Z,1510153882.325 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:11:22.710Z,1510153882.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:22.727Z,1510153882.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T15:11:22.728Z,1510153882.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:23.140Z,1510153883.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:23.156Z,1510153883.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T15:11:23.157Z,1510153883.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:23.521Z,1510153883.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:23.552Z,1510153883.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T15:11:23.553Z,1510153883.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:24.192Z,1510153884.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:24.207Z,1510153884.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.7 s old, using for 20.0 s.
2017-11-08T15:11:24.208Z,1510153884.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:24.325Z,1510153884.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:24.359Z,1510153884.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T15:11:24.360Z,1510153884.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:24.750Z,1510153884.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:24.766Z,1510153884.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T15:11:24.766Z,1510153884.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:25.150Z,1510153885.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:25.178Z,1510153885.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T15:11:25.179Z,1510153885.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:25.550Z,1510153885.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:25.566Z,1510153885.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T15:11:25.566Z,1510153885.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:25.931Z,1510153885.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:25.966Z,1510153885.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T15:11:25.967Z,1510153885.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:26.332Z,1510153886.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:26.367Z,1510153886.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T15:11:26.368Z,1510153886.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:26.760Z,1510153886.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:26.777Z,1510153886.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T15:11:26.778Z,1510153886.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:27.127Z,1510153887.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:27.151Z,1510153887.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T15:11:27.152Z,1510153887.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:27.531Z,1510153887.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:27.567Z,1510153887.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T15:11:27.568Z,1510153887.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:27.953Z,1510153887.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:27.969Z,1510153887.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T15:11:27.970Z,1510153887.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:28.626Z,1510153888.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:28.642Z,1510153888.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2017-11-08T15:11:28.643Z,1510153888.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:28.775Z,1510153888.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:28.822Z,1510153888.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-08T15:11:28.823Z,1510153888.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:29.190Z,1510153889.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:29.223Z,1510153889.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T15:11:29.224Z,1510153889.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:29.586Z,1510153889.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:29.622Z,1510153889.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T15:11:29.623Z,1510153889.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:29.985Z,1510153889.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:30.018Z,1510153890.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T15:11:30.019Z,1510153890.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:30.375Z,1510153890.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:30.391Z,1510153890.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T15:11:30.392Z,1510153890.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:30.774Z,1510153890.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:30.790Z,1510153890.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T15:11:30.791Z,1510153890.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:31.174Z,1510153891.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:31.190Z,1510153891.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T15:11:31.191Z,1510153891.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:31.575Z,1510153891.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:31.590Z,1510153891.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T15:11:31.591Z,1510153891.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:31.994Z,1510153891.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:32.018Z,1510153892.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T15:11:32.019Z,1510153892.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:32.385Z,1510153892.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:32.421Z,1510153892.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T15:11:32.422Z,1510153892.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:33.063Z,1510153893.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:33.133Z,1510153893.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T15:11:33.134Z,1510153893.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:33.244Z,1510153893.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:33.294Z,1510153893.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T15:11:33.295Z,1510153893.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:33.673Z,1510153893.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:33.689Z,1510153893.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T15:11:33.690Z,1510153893.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:34.075Z,1510153894.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:34.128Z,1510153894.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2017-11-08T15:11:34.130Z,1510153894.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:34.469Z,1510153894.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:34.503Z,1510153894.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2017-11-08T15:11:34.504Z,1510153894.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:34.852Z,1510153894.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:34.899Z,1510153894.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T15:11:34.900Z,1510153894.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:35.251Z,1510153895.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:35.291Z,1510153895.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T15:11:35.292Z,1510153895.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:35.649Z,1510153895.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:35.677Z,1510153895.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T15:11:35.678Z,1510153895.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:36.081Z,1510153896.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:36.100Z,1510153896.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T15:11:36.101Z,1510153896.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:36.447Z,1510153896.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:36.468Z,1510153896.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T15:11:36.469Z,1510153896.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:36.862Z,1510153896.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:36.899Z,1510153896.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T15:11:36.900Z,1510153896.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:37.578Z,1510153897.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:37.603Z,1510153897.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T15:11:37.604Z,1510153897.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:37.725Z,1510153897.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:37.757Z,1510153897.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-08T15:11:37.758Z,1510153897.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:38.151Z,1510153898.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:38.168Z,1510153898.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-08T15:11:38.170Z,1510153898.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:38.547Z,1510153898.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:38.562Z,1510153898.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-11-08T15:11:38.563Z,1510153898.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:38.949Z,1510153898.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:38.966Z,1510153898.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-08T15:11:38.967Z,1510153898.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:39.332Z,1510153899.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:39.365Z,1510153899.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-08T15:11:39.366Z,1510153899.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:39.754Z,1510153899.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:39.770Z,1510153899.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-08T15:11:39.771Z,1510153899.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:40.150Z,1510153900.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:40.166Z,1510153900.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-08T15:11:40.167Z,1510153900.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:40.826Z,1510153900.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:40.847Z,1510153900.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T15:11:40.848Z,1510153900.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:40.964Z,1510153900.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:40.981Z,1510153900.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-08T15:11:40.982Z,1510153900.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:41.373Z,1510153901.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:41.389Z,1510153901.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-08T15:11:41.390Z,1510153901.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:41.774Z,1510153901.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:41.790Z,1510153901.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:42.170Z,1510153902.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:42.186Z,1510153902.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:42.564Z,1510153902.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:42.592Z,1510153902.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:42.956Z,1510153902.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:43.019Z,1510153903.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:43.366Z,1510153903.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:43.383Z,1510153903.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:43.793Z,1510153903.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:43.828Z,1510153903.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:44.166Z,1510153904.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:44.187Z,1510153904.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:44.579Z,1510153904.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:44.599Z,1510153904.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:45.241Z,1510153905.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:45.277Z,1510153905.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:45.391Z,1510153905.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:45.432Z,1510153905.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:45.809Z,1510153905.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:45.840Z,1510153905.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:46.209Z,1510153906.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:46.236Z,1510153906.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:46.606Z,1510153906.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:46.632Z,1510153906.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:46.999Z,1510153906.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:47.032Z,1510153907.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:47.400Z,1510153907.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:47.416Z,1510153907.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:47.825Z,1510153907.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:47.841Z,1510153907.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:48.214Z,1510153908.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:48.247Z,1510153908.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:48.876Z,1510153908.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:48.896Z,1510153908.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:48.998Z,1510153908.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:49.015Z,1510153909.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:49.414Z,1510153909.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:49.447Z,1510153909.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:49.818Z,1510153909.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:49.845Z,1510153909.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:50.219Z,1510153910.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:50.257Z,1510153910.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:50.603Z,1510153910.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:50.644Z,1510153910.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:51.003Z,1510153911.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:51.019Z,1510153911.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:51.407Z,1510153911.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:51.423Z,1510153911.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:51.826Z,1510153911.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:51.848Z,1510153911.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:52.205Z,1510153912.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:52.221Z,1510153912.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:52.622Z,1510153912.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:52.647Z,1510153912.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:53.298Z,1510153913.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:53.314Z,1510153913.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:53.419Z,1510153913.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:53.451Z,1510153913.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:53.840Z,1510153913.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:53.856Z,1510153913.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:54.236Z,1510153914.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:54.259Z,1510153914.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:54.640Z,1510153914.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:54.700Z,1510153914.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:55.019Z,1510153915.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:55.080Z,1510153915.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:55.420Z,1510153915.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:55.456Z,1510153915.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:55.852Z,1510153915.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:55.911Z,1510153915.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:56.246Z,1510153916.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:56.262Z,1510153916.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:56.904Z,1510153916.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:56.950Z,1510153916.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:57.067Z,1510153917.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:57.111Z,1510153917.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:57.482Z,1510153917.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:57.515Z,1510153917.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:57.881Z,1510153917.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:57.908Z,1510153917.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:58.282Z,1510153918.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:58.312Z,1510153918.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:58.679Z,1510153918.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:58.704Z,1510153918.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:59.067Z,1510153919.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:59.108Z,1510153919.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:59.468Z,1510153919.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:59.484Z,1510153919.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:11:59.899Z,1510153919.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:11:59.915Z,1510153919.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:00.263Z,1510153920.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:00.283Z,1510153920.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:00.677Z,1510153920.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:00.702Z,1510153920.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:01.362Z,1510153921.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:01.379Z,1510153921.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:01.477Z,1510153921.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:01.522Z,1510153921.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:01.904Z,1510153921.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:01.920Z,1510153921.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:02.298Z,1510153922.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:02.328Z,1510153922.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:02.700Z,1510153922.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:02.716Z,1510153922.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:03.084Z,1510153923.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:03.114Z,1510153923.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:03.484Z,1510153923.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:03.514Z,1510153923.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:03.911Z,1510153923.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:03.927Z,1510153923.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:04.304Z,1510153924.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:04.323Z,1510153924.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:04.978Z,1510153924.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:05.027Z,1510153925.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:05.133Z,1510153925.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:05.167Z,1510153925.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:05.556Z,1510153925.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:05.572Z,1510153925.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:05.962Z,1510153925.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:05.984Z,1510153925.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:06.355Z,1510153926.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:06.371Z,1510153926.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:06.739Z,1510153926.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:06.765Z,1510153926.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:07.135Z,1510153927.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:07.167Z,1510153927.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:07.540Z,1510153927.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:07.565Z,1510153927.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:07.965Z,1510153927.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:07.987Z,1510153927.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:08.360Z,1510153928.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:08.376Z,1510153928.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:09.022Z,1510153929.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:09.038Z,1510153929.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:09.171Z,1510153929.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:09.215Z,1510153929.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:09.578Z,1510153929.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:09.610Z,1510153929.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:09.977Z,1510153929.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:09.994Z,1510153929.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:10.377Z,1510153930.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:10.419Z,1510153930.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:10.765Z,1510153930.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:10.781Z,1510153930.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:11.164Z,1510153931.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:11.180Z,1510153931.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:11.566Z,1510153931.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:11.582Z,1510153931.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:11.990Z,1510153931.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:12.014Z,1510153932.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:12.377Z,1510153932.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:12.415Z,1510153932.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:13.055Z,1510153933.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:13.075Z,1510153933.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:13.188Z,1510153933.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:13.228Z,1510153933.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:13.608Z,1510153933.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:13.624Z,1510153933.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:14.000Z,1510153934.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:14.026Z,1510153934.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:14.418Z,1510153934.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:14.435Z,1510153934.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:14.786Z,1510153934.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:14.803Z,1510153934.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:15.188Z,1510153935.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:15.221Z,1510153935.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:15.591Z,1510153935.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:15.612Z,1510153935.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:16.014Z,1510153936.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:16.037Z,1510153936.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:16.389Z,1510153936.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:16.405Z,1510153936.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:16.788Z,1510153936.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:16.863Z,1510153936.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:17.190Z,1510153937.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:17.264Z,1510153937.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:17.592Z,1510153937.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:17.608Z,1510153937.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:17.993Z,1510153937.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:18.009Z,1510153938.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:18.391Z,1510153938.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:18.447Z,1510153938.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:18.790Z,1510153938.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:18.811Z,1510153938.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:19.192Z,1510153939.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:19.247Z,1510153939.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:19.593Z,1510153939.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:19.609Z,1510153939.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:19.992Z,1510153939.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:20.008Z,1510153940.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:20.392Z,1510153940.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:20.415Z,1510153940.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:20.800Z,1510153940.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:20.817Z,1510153940.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:21.485Z,1510153941.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:21.500Z,1510153941.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:21.602Z,1510153941.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:21.650Z,1510153941.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:22.018Z,1510153942.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:22.050Z,1510153942.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:22.417Z,1510153942.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:22.443Z,1510153942.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:22.814Z,1510153942.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:22.839Z,1510153942.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:23.207Z,1510153943.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:23.241Z,1510153943.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:23.604Z,1510153943.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:23.619Z,1510153943.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:24.030Z,1510153944.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:24.052Z,1510153944.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:24.407Z,1510153944.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:24.444Z,1510153944.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:24.807Z,1510153944.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:24.823Z,1510153944.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:25.220Z,1510153945.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:25.250Z,1510153945.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:25.898Z,1510153945.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:25.914Z,1510153945.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:26.013Z,1510153946.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:26.062Z,1510153946.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:26.439Z,1510153946.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:26.455Z,1510153946.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:26.839Z,1510153946.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:26.858Z,1510153946.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:27.240Z,1510153947.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:27.303Z,1510153947.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:27.619Z,1510153947.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:27.650Z,1510153947.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:28.019Z,1510153948.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:28.049Z,1510153948.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:28.420Z,1510153948.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:28.451Z,1510153948.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:28.850Z,1510153948.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:28.866Z,1510153948.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:29.220Z,1510153949.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:29.250Z,1510153949.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:29.637Z,1510153949.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:29.654Z,1510153949.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:30.311Z,1510153950.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:30.328Z,1510153950.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:30.463Z,1510153950.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:30.503Z,1510153950.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:30.888Z,1510153950.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:30.904Z,1510153950.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:31.286Z,1510153951.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:31.302Z,1510153951.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:31.674Z,1510153951.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:31.703Z,1510153951.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:32.063Z,1510153952.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:32.099Z,1510153952.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:32.460Z,1510153952.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:32.501Z,1510153952.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:32.892Z,1510153952.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:32.909Z,1510153952.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:33.278Z,1510153953.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:33.307Z,1510153953.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:35.047Z,1510153955.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:35.067Z,1510153955.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:35.177Z,1510153955.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:35.227Z,1510153955.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:35.594Z,1510153955.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:35.623Z,1510153955.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:35.996Z,1510153955.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:36.012Z,1510153956.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:36.398Z,1510153956.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:36.414Z,1510153956.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:36.777Z,1510153956.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:36.808Z,1510153956.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:37.176Z,1510153957.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:37.208Z,1510153957.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:37.577Z,1510153957.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:37.613Z,1510153957.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:38.006Z,1510153958.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:38.039Z,1510153958.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:38.394Z,1510153958.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:38.425Z,1510153958.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:39.075Z,1510153959.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:39.167Z,1510153959.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:39.290Z,1510153959.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:39.307Z,1510153959.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:39.697Z,1510153959.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:39.728Z,1510153959.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:40.095Z,1510153960.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:40.148Z,1510153960.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:40.494Z,1510153960.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:40.528Z,1510153960.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:40.886Z,1510153960.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:40.927Z,1510153960.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:41.285Z,1510153961.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:41.301Z,1510153961.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:41.686Z,1510153961.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:41.703Z,1510153961.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:42.101Z,1510153962.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:42.126Z,1510153962.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:42.498Z,1510153962.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:42.529Z,1510153962.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:43.213Z,1510153963.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:43.229Z,1510153963.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:43.346Z,1510153963.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:43.382Z,1510153963.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:43.765Z,1510153963.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:43.782Z,1510153963.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:44.164Z,1510153964.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:44.181Z,1510153964.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:44.549Z,1510153964.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:44.583Z,1510153964.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:44.943Z,1510153964.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:44.980Z,1510153964.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:45.340Z,1510153965.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:45.356Z,1510153965.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:45.772Z,1510153965.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:45.788Z,1510153965.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:46.157Z,1510153966.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:46.191Z,1510153966.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:46.828Z,1510153966.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:46.844Z,1510153966.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:46.950Z,1510153966.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:46.979Z,1510153966.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:47.362Z,1510153967.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:47.395Z,1510153967.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:47.761Z,1510153967.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:47.795Z,1510153967.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:48.153Z,1510153968.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:48.187Z,1510153968.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:48.261Z,1510153968.261 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T15:12:48.547Z,1510153968.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:48.564Z,1510153968.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:48.947Z,1510153968.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:49.003Z,1510153969.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:49.344Z,1510153969.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:49.360Z,1510153969.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:49.781Z,1510153969.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:49.798Z,1510153969.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:50.147Z,1510153970.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:50.164Z,1510153970.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:50.557Z,1510153970.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:50.594Z,1510153970.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:51.235Z,1510153971.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:51.251Z,1510153971.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:51.363Z,1510153971.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:51.404Z,1510153971.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:51.789Z,1510153971.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:51.805Z,1510153971.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:52.189Z,1510153972.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:52.206Z,1510153972.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:52.586Z,1510153972.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:52.602Z,1510153972.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:52.967Z,1510153972.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:53.004Z,1510153973.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:53.365Z,1510153973.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:53.404Z,1510153973.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:53.799Z,1510153973.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:53.816Z,1510153973.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:54.190Z,1510153974.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:54.206Z,1510153974.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:54.849Z,1510153974.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:54.865Z,1510153974.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:55.005Z,1510153975.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:55.021Z,1510153975.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:55.422Z,1510153975.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:55.448Z,1510153975.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:55.821Z,1510153975.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:55.849Z,1510153975.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:56.218Z,1510153976.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:56.249Z,1510153976.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:56.605Z,1510153976.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:56.621Z,1510153976.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:57.005Z,1510153977.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:57.021Z,1510153977.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:57.406Z,1510153977.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:57.422Z,1510153977.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:57.832Z,1510153977.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:57.849Z,1510153977.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:58.205Z,1510153978.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:58.222Z,1510153978.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:58.619Z,1510153978.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:58.651Z,1510153978.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:59.332Z,1510153979.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:59.348Z,1510153979.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:59.458Z,1510153979.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:59.500Z,1510153979.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:12:59.884Z,1510153979.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:12:59.900Z,1510153979.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:00.273Z,1510153980.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:00.303Z,1510153980.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:00.685Z,1510153980.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:00.727Z,1510153980.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:01.063Z,1510153981.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:01.109Z,1510153981.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:01.464Z,1510153981.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:01.479Z,1510153981.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:01.901Z,1510153981.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:01.955Z,1510153981.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:02.281Z,1510153982.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:02.311Z,1510153982.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:02.939Z,1510153982.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:02.980Z,1510153982.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:03.112Z,1510153983.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:03.155Z,1510153983.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:03.490Z,1510153983.490 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T15:13:03.490Z,1510153983.490 [NAL9602] Data Fault, FailCount= 1
2017-11-08T15:13:03.490Z,1510153983.490 [NAL9602](ERROR): Data Fault
2017-11-08T15:13:03.508Z,1510153983.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:03.524Z,1510153983.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:03.617Z,1510153983.617 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T15:13:03.890Z,1510153983.890 [NAL9602](INFO): Powering down
2017-11-08T15:13:03.908Z,1510153983.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:03.923Z,1510153983.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:04.309Z,1510153984.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:04.325Z,1510153984.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:04.710Z,1510153984.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:04.726Z,1510153984.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:04.801Z,1510153984.801 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T15:13:04.801Z,1510153984.801 [NAL9602] No Fault, FailCount= 1
2017-11-08T15:13:05.109Z,1510153985.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:05.125Z,1510153985.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:05.509Z,1510153985.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:05.525Z,1510153985.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:05.910Z,1510153985.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:05.932Z,1510153985.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:06.309Z,1510153986.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:06.325Z,1510153986.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:06.709Z,1510153986.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:06.729Z,1510153986.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:07.109Z,1510153987.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:07.126Z,1510153987.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:07.511Z,1510153987.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:07.526Z,1510153987.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:07.911Z,1510153987.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:07.928Z,1510153987.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:08.310Z,1510153988.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:08.332Z,1510153988.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:08.706Z,1510153988.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:08.730Z,1510153988.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:09.106Z,1510153989.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:09.227Z,1510153989.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:09.507Z,1510153989.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:09.559Z,1510153989.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:09.907Z,1510153989.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:09.936Z,1510153989.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:10.313Z,1510153990.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:10.403Z,1510153990.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:10.702Z,1510153990.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:10.731Z,1510153990.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:11.109Z,1510153991.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:11.154Z,1510153991.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:11.509Z,1510153991.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:11.526Z,1510153991.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:11.909Z,1510153991.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:11.926Z,1510153991.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:12.306Z,1510153992.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:12.328Z,1510153992.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:12.710Z,1510153992.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:12.726Z,1510153992.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:13.109Z,1510153993.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:13.125Z,1510153993.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:13.506Z,1510153993.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:13.522Z,1510153993.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:13.905Z,1510153993.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:13.921Z,1510153993.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:14.309Z,1510153994.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:14.325Z,1510153994.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:14.706Z,1510153994.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:14.721Z,1510153994.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:15.105Z,1510153995.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:15.122Z,1510153995.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:15.508Z,1510153995.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:15.525Z,1510153995.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:15.904Z,1510153995.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:15.921Z,1510153995.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:16.308Z,1510153996.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:16.325Z,1510153996.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:16.708Z,1510153996.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:16.724Z,1510153996.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:17.104Z,1510153997.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:17.120Z,1510153997.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:17.508Z,1510153997.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:17.525Z,1510153997.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:17.908Z,1510153997.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:17.924Z,1510153997.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:18.303Z,1510153998.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:18.328Z,1510153998.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:18.709Z,1510153998.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:18.725Z,1510153998.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:19.109Z,1510153999.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:19.125Z,1510153999.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:19.505Z,1510153999.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:19.527Z,1510153999.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:19.909Z,1510153999.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:19.925Z,1510153999.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:20.308Z,1510154000.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:20.332Z,1510154000.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:20.704Z,1510154000.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:20.727Z,1510154000.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:21.105Z,1510154001.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:21.121Z,1510154001.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:21.506Z,1510154001.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:21.527Z,1510154001.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:21.905Z,1510154001.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:21.927Z,1510154001.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:22.309Z,1510154002.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:22.325Z,1510154002.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:22.709Z,1510154002.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:22.725Z,1510154002.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:23.105Z,1510154003.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:23.196Z,1510154003.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:23.504Z,1510154003.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:23.521Z,1510154003.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:23.908Z,1510154003.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:23.963Z,1510154003.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:24.308Z,1510154004.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:24.324Z,1510154004.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:24.704Z,1510154004.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:24.763Z,1510154004.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:25.107Z,1510154005.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:25.123Z,1510154005.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:25.505Z,1510154005.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:25.520Z,1510154005.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:25.904Z,1510154005.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:25.921Z,1510154005.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:26.308Z,1510154006.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:26.324Z,1510154006.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:26.705Z,1510154006.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:26.720Z,1510154006.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:27.104Z,1510154007.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:27.121Z,1510154007.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:27.508Z,1510154007.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:27.524Z,1510154007.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:27.905Z,1510154007.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:27.920Z,1510154007.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:28.309Z,1510154008.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:28.325Z,1510154008.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:28.708Z,1510154008.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:28.724Z,1510154008.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:29.105Z,1510154009.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:29.127Z,1510154009.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:29.504Z,1510154009.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:29.520Z,1510154009.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:29.908Z,1510154009.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:29.924Z,1510154009.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:30.305Z,1510154010.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:30.327Z,1510154010.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:30.704Z,1510154010.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:30.721Z,1510154010.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:31.106Z,1510154011.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:31.128Z,1510154011.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:31.505Z,1510154011.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:31.520Z,1510154011.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:31.904Z,1510154011.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:31.921Z,1510154011.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:32.308Z,1510154012.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:32.324Z,1510154012.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:32.705Z,1510154012.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:32.720Z,1510154012.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:33.104Z,1510154013.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:33.163Z,1510154013.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:33.509Z,1510154013.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:33.525Z,1510154013.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:33.905Z,1510154013.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:33.927Z,1510154013.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:34.286Z,1510154014.286 [NAL9602](INFO): Powering up NAL9602
2017-11-08T15:13:34.313Z,1510154014.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:34.335Z,1510154014.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:34.707Z,1510154014.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:34.728Z,1510154014.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:35.105Z,1510154015.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:35.120Z,1510154015.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:35.505Z,1510154015.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:35.521Z,1510154015.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:35.908Z,1510154015.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:35.924Z,1510154015.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:36.308Z,1510154016.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:36.324Z,1510154016.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:36.709Z,1510154016.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:36.725Z,1510154016.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:37.108Z,1510154017.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:37.124Z,1510154017.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:37.508Z,1510154017.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:37.524Z,1510154017.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:37.904Z,1510154017.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:37.921Z,1510154017.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:38.308Z,1510154018.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:38.324Z,1510154018.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:38.708Z,1510154018.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:38.724Z,1510154018.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:39.105Z,1510154019.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:39.121Z,1510154019.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:39.508Z,1510154019.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:39.532Z,1510154019.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:39.909Z,1510154019.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:39.925Z,1510154019.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:40.309Z,1510154020.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:40.325Z,1510154020.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:40.709Z,1510154020.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:40.726Z,1510154020.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:41.105Z,1510154021.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:41.127Z,1510154021.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:41.509Z,1510154021.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:41.525Z,1510154021.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:41.911Z,1510154021.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:41.927Z,1510154021.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:42.309Z,1510154022.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:42.325Z,1510154022.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:42.709Z,1510154022.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:42.725Z,1510154022.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:43.107Z,1510154023.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:43.129Z,1510154023.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:43.510Z,1510154023.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:43.531Z,1510154023.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:43.908Z,1510154023.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:43.925Z,1510154023.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:44.314Z,1510154024.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:44.331Z,1510154024.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:44.715Z,1510154024.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:44.778Z,1510154024.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:45.086Z,1510154025.086 [NAL9602](INFO): NAL9602 initialized
2017-11-08T15:13:45.117Z,1510154025.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:45.180Z,1510154025.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:45.515Z,1510154025.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:45.531Z,1510154025.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:45.925Z,1510154025.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:45.941Z,1510154025.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:46.325Z,1510154026.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:46.383Z,1510154026.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:46.721Z,1510154026.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:46.743Z,1510154026.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:47.114Z,1510154027.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:47.152Z,1510154027.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:47.527Z,1510154027.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:47.544Z,1510154027.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:47.925Z,1510154027.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:47.942Z,1510154027.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:48.586Z,1510154028.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:48.602Z,1510154028.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:48.735Z,1510154028.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:48.786Z,1510154028.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:49.154Z,1510154029.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:49.187Z,1510154029.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:49.550Z,1510154029.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:49.576Z,1510154029.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:49.951Z,1510154029.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:49.977Z,1510154029.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:50.340Z,1510154030.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:50.379Z,1510154030.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:50.740Z,1510154030.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:50.756Z,1510154030.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:51.141Z,1510154031.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:51.174Z,1510154031.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:51.566Z,1510154031.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:51.589Z,1510154031.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:51.939Z,1510154031.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:51.955Z,1510154031.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:52.354Z,1510154032.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:52.381Z,1510154032.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:53.034Z,1510154033.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:53.050Z,1510154033.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:53.153Z,1510154033.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:53.190Z,1510154033.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:53.577Z,1510154033.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:53.593Z,1510154033.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:53.976Z,1510154033.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:53.993Z,1510154033.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:54.382Z,1510154034.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:54.398Z,1510154034.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:54.759Z,1510154034.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:54.787Z,1510154034.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:55.160Z,1510154035.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:55.218Z,1510154035.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:55.586Z,1510154035.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:55.603Z,1510154035.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:55.970Z,1510154035.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:55.987Z,1510154035.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:56.380Z,1510154036.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:56.397Z,1510154036.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:57.041Z,1510154037.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:57.058Z,1510154037.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:57.194Z,1510154037.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:57.227Z,1510154037.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:57.602Z,1510154037.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:57.627Z,1510154037.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:58.001Z,1510154038.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:58.036Z,1510154038.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:58.406Z,1510154038.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:58.437Z,1510154038.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:58.788Z,1510154038.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:58.805Z,1510154038.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:59.191Z,1510154039.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:59.216Z,1510154039.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:59.610Z,1510154039.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:13:59.641Z,1510154039.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:13:59.992Z,1510154039.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:00.009Z,1510154040.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:00.390Z,1510154040.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:00.407Z,1510154040.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:00.792Z,1510154040.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:00.809Z,1510154040.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:01.187Z,1510154041.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:01.212Z,1510154041.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:01.590Z,1510154041.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:01.607Z,1510154041.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:01.993Z,1510154041.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:02.016Z,1510154042.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:02.393Z,1510154042.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:02.409Z,1510154042.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:02.790Z,1510154042.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:02.806Z,1510154042.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:03.191Z,1510154043.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:03.212Z,1510154043.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:03.593Z,1510154043.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:03.609Z,1510154043.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:03.990Z,1510154043.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:04.006Z,1510154044.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:04.386Z,1510154044.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:04.415Z,1510154044.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:04.793Z,1510154044.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:04.809Z,1510154044.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:05.202Z,1510154045.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:05.222Z,1510154045.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:05.887Z,1510154045.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:05.904Z,1510154045.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:06.018Z,1510154046.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:06.060Z,1510154046.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:06.441Z,1510154046.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:06.457Z,1510154046.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:06.826Z,1510154046.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:06.852Z,1510154046.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:07.224Z,1510154047.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:07.323Z,1510154047.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:07.616Z,1510154047.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:07.632Z,1510154047.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:08.015Z,1510154048.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:08.067Z,1510154048.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:08.420Z,1510154048.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:08.436Z,1510154048.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:08.841Z,1510154048.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:08.909Z,1510154048.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:09.229Z,1510154049.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:09.261Z,1510154049.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:09.900Z,1510154049.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:09.923Z,1510154049.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:10.039Z,1510154050.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:10.073Z,1510154050.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:10.456Z,1510154050.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:10.476Z,1510154050.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:10.860Z,1510154050.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:10.877Z,1510154050.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:11.262Z,1510154051.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:11.296Z,1510154051.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:11.635Z,1510154051.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:11.670Z,1510154051.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:12.035Z,1510154052.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:12.073Z,1510154052.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:12.440Z,1510154052.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:12.481Z,1510154052.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:12.867Z,1510154052.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:12.886Z,1510154052.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:13.235Z,1510154053.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:13.251Z,1510154053.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:13.653Z,1510154053.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:13.687Z,1510154053.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:14.329Z,1510154054.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:14.345Z,1510154054.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:14.440Z,1510154054.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:14.490Z,1510154054.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:14.867Z,1510154054.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:14.891Z,1510154054.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:15.266Z,1510154055.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:15.284Z,1510154055.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:15.655Z,1510154055.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:15.690Z,1510154055.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:16.048Z,1510154056.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:16.078Z,1510154056.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:16.444Z,1510154056.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:16.478Z,1510154056.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:16.875Z,1510154056.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:16.935Z,1510154056.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:17.247Z,1510154057.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:17.285Z,1510154057.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:17.643Z,1510154057.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:17.690Z,1510154057.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:18.043Z,1510154058.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:18.059Z,1510154058.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:18.447Z,1510154058.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:18.467Z,1510154058.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:18.848Z,1510154058.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:18.891Z,1510154058.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:19.250Z,1510154059.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:19.293Z,1510154059.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:19.668Z,1510154059.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:19.704Z,1510154059.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:20.043Z,1510154060.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:20.070Z,1510154060.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:20.453Z,1510154060.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:20.472Z,1510154060.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:20.852Z,1510154060.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:20.897Z,1510154060.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:21.252Z,1510154061.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:21.268Z,1510154061.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:21.649Z,1510154061.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:21.669Z,1510154061.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:22.053Z,1510154062.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:22.075Z,1510154062.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:22.458Z,1510154062.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:22.500Z,1510154062.500 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:22.500Z,1510154062.500 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2017-11-08T15:14:22.500Z,1510154062.500 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T15:14:22.502Z,1510154062.502 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:22.502Z,1510154062.502 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37
2017-11-08T15:14:22.502Z,1510154062.502 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T15:14:22.504Z,1510154062.504 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:22.504Z,1510154062.504 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 37
2017-11-08T15:14:22.504Z,1510154062.504 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T15:14:22.589Z,1510154062.589 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T15:14:22.589Z,1510154062.589 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T15:14:22.590Z,1510154062.590 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T15:14:23.138Z,1510154063.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:23.250Z,1510154063.250 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T15:14:23.250Z,1510154063.250 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2017-11-08T15:14:23.250Z,1510154063.250 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T15:14:23.250Z,1510154063.250 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37
2017-11-08T15:14:23.251Z,1510154063.251 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T15:14:23.251Z,1510154063.251 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 37
2017-11-08T15:14:23.285Z,1510154063.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:23.335Z,1510154063.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T15:14:23.335Z,1510154063.335 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:14:23.335Z,1510154063.335 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:14:23.336Z,1510154063.336 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T15:14:23.336Z,1510154063.336 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:14:23.341Z,1510154063.341 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:14:23.341Z,1510154063.341 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T15:14:23.342Z,1510154063.342 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:14:23.342Z,1510154063.342 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:14:23.694Z,1510154063.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:23.722Z,1510154063.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T15:14:23.723Z,1510154063.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:24.099Z,1510154064.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:24.133Z,1510154064.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T15:14:24.134Z,1510154064.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:24.502Z,1510154064.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:24.527Z,1510154064.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T15:14:24.528Z,1510154064.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:24.888Z,1510154064.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:24.904Z,1510154064.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T15:14:24.905Z,1510154064.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:25.288Z,1510154065.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:25.304Z,1510154065.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T15:14:25.305Z,1510154065.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:25.710Z,1510154065.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:25.734Z,1510154065.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T15:14:25.735Z,1510154065.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:26.088Z,1510154066.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:26.107Z,1510154066.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T15:14:26.108Z,1510154066.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:26.501Z,1510154066.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:26.533Z,1510154066.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T15:14:26.534Z,1510154066.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:27.180Z,1510154067.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:27.195Z,1510154067.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2017-11-08T15:14:27.197Z,1510154067.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:27.299Z,1510154067.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:27.316Z,1510154067.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T15:14:27.329Z,1510154067.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:27.718Z,1510154067.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:27.747Z,1510154067.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T15:14:27.748Z,1510154067.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:28.117Z,1510154068.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:28.153Z,1510154068.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-08T15:14:28.154Z,1510154068.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:28.253Z,1510154068.253 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:14:28.253Z,1510154068.253 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T15:14:28.361Z,1510154068.361 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:14:28.361Z,1510154068.361 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:14:28.361Z,1510154068.361 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:14:28.361Z,1510154068.361 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T15:14:28.361Z,1510154068.361 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:14:28.518Z,1510154068.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:28.549Z,1510154068.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T15:14:28.550Z,1510154068.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:28.629Z,1510154068.629 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:14:28.765Z,1510154068.765 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:14:28.851Z,1510154068.851 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:14:28.909Z,1510154068.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:28.994Z,1510154068.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-08T15:14:28.996Z,1510154068.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:29.308Z,1510154069.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:29.343Z,1510154069.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T15:14:29.344Z,1510154069.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:29.732Z,1510154069.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:29.789Z,1510154069.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-08T15:14:29.790Z,1510154069.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:30.104Z,1510154070.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:30.120Z,1510154070.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T15:14:30.137Z,1510154070.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:30.228Z,1510154070.228 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:14:30.229Z,1510154070.229 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T15:14:30.465Z,1510154070.465 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:14:30.465Z,1510154070.465 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:14:30.465Z,1510154070.465 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:14:30.465Z,1510154070.465 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T15:14:30.466Z,1510154070.466 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:14:30.514Z,1510154070.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:30.552Z,1510154070.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T15:14:30.553Z,1510154070.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:30.634Z,1510154070.634 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:14:30.869Z,1510154070.869 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:14:30.952Z,1510154070.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:30.980Z,1510154070.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T15:14:31.002Z,1510154071.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:31.070Z,1510154071.070 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:14:31.597Z,1510154071.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:31.620Z,1510154071.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2017-11-08T15:14:31.621Z,1510154071.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:31.731Z,1510154071.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:31.762Z,1510154071.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T15:14:31.763Z,1510154071.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:32.152Z,1510154072.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:32.168Z,1510154072.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T15:14:32.170Z,1510154072.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:32.548Z,1510154072.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:32.563Z,1510154072.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T15:14:32.565Z,1510154072.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:32.649Z,1510154072.649 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:14:32.649Z,1510154072.649 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T15:14:32.685Z,1510154072.685 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:14:32.685Z,1510154072.685 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:14:32.685Z,1510154072.685 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:14:32.685Z,1510154072.685 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T15:14:32.685Z,1510154072.685 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:14:32.949Z,1510154072.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:32.965Z,1510154072.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T15:14:32.966Z,1510154072.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:33.045Z,1510154073.045 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:14:33.089Z,1510154073.089 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:14:33.180Z,1510154073.180 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:14:33.332Z,1510154073.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:33.363Z,1510154073.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T15:14:33.365Z,1510154073.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:33.731Z,1510154073.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:33.761Z,1510154073.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T15:14:33.762Z,1510154073.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:34.132Z,1510154074.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:34.162Z,1510154074.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T15:14:34.163Z,1510154074.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:34.563Z,1510154074.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:34.583Z,1510154074.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T15:14:34.585Z,1510154074.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:34.681Z,1510154074.681 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:14:34.681Z,1510154074.681 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T15:14:34.797Z,1510154074.797 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:14:34.797Z,1510154074.797 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:14:34.797Z,1510154074.797 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:14:34.797Z,1510154074.797 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T15:14:34.797Z,1510154074.797 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:14:34.923Z,1510154074.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:34.938Z,1510154074.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T15:14:34.939Z,1510154074.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:35.037Z,1510154075.037 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:14:35.201Z,1510154075.201 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:14:35.289Z,1510154075.289 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:14:35.328Z,1510154075.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:35.363Z,1510154075.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T15:14:35.364Z,1510154075.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:35.727Z,1510154075.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:35.747Z,1510154075.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T15:14:35.765Z,1510154075.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:36.131Z,1510154076.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:36.147Z,1510154076.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T15:14:36.148Z,1510154076.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:36.536Z,1510154076.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:36.552Z,1510154076.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T15:14:36.570Z,1510154076.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:36.660Z,1510154076.660 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:14:36.661Z,1510154076.661 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T15:14:36.909Z,1510154076.909 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:14:36.909Z,1510154076.909 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:14:36.909Z,1510154076.909 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:14:36.909Z,1510154076.909 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T15:14:36.909Z,1510154076.909 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:14:36.933Z,1510154076.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:36.966Z,1510154076.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T15:14:36.967Z,1510154076.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:37.053Z,1510154077.053 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:14:37.053Z,1510154077.053 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:14:37.313Z,1510154077.313 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:14:37.352Z,1510154077.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:37.392Z,1510154077.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T15:14:37.393Z,1510154077.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:37.509Z,1510154077.509 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:14:37.730Z,1510154077.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:37.758Z,1510154077.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T15:14:37.759Z,1510154077.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:38.133Z,1510154078.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:38.149Z,1510154078.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T15:14:38.150Z,1510154078.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:38.533Z,1510154078.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:38.548Z,1510154078.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T15:14:38.549Z,1510154078.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:38.938Z,1510154078.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:38.995Z,1510154078.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T15:14:38.997Z,1510154078.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:39.349Z,1510154079.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:39.366Z,1510154079.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T15:14:39.367Z,1510154079.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:39.747Z,1510154079.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:39.767Z,1510154079.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T15:14:39.768Z,1510154079.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:40.414Z,1510154080.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:40.431Z,1510154080.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2017-11-08T15:14:40.449Z,1510154080.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:40.567Z,1510154080.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:40.601Z,1510154080.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T15:14:40.602Z,1510154080.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:40.982Z,1510154080.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:41.014Z,1510154081.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T15:14:41.015Z,1510154081.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:41.397Z,1510154081.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:41.419Z,1510154081.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T15:14:41.420Z,1510154081.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:41.786Z,1510154081.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:41.815Z,1510154081.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T15:14:41.816Z,1510154081.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:42.167Z,1510154082.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:42.183Z,1510154082.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-08T15:14:42.184Z,1510154082.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:42.572Z,1510154082.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:42.601Z,1510154082.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:42.976Z,1510154082.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:42.992Z,1510154082.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:43.372Z,1510154083.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:43.388Z,1510154083.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:43.809Z,1510154083.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:43.825Z,1510154083.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:44.176Z,1510154084.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:44.192Z,1510154084.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:44.586Z,1510154084.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:44.622Z,1510154084.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:45.257Z,1510154085.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:45.276Z,1510154085.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:45.388Z,1510154085.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:45.404Z,1510154085.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:45.802Z,1510154085.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:45.827Z,1510154085.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:46.202Z,1510154086.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:46.229Z,1510154086.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:46.602Z,1510154086.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:46.629Z,1510154086.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:46.988Z,1510154086.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:47.004Z,1510154087.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:47.389Z,1510154087.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:47.405Z,1510154087.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:47.818Z,1510154087.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:47.834Z,1510154087.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:48.186Z,1510154088.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:48.208Z,1510154088.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:48.602Z,1510154088.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:48.628Z,1510154088.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:49.279Z,1510154089.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:49.300Z,1510154089.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:49.447Z,1510154089.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:49.488Z,1510154089.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:49.868Z,1510154089.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:49.885Z,1510154089.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:50.268Z,1510154090.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:50.285Z,1510154090.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:50.653Z,1510154090.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:50.681Z,1510154090.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:51.048Z,1510154091.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:51.120Z,1510154091.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:51.451Z,1510154091.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:51.472Z,1510154091.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:51.878Z,1510154091.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:51.942Z,1510154091.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:52.261Z,1510154092.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:52.293Z,1510154092.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:52.936Z,1510154092.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:52.992Z,1510154092.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:53.109Z,1510154093.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:53.155Z,1510154093.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:53.536Z,1510154093.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:53.553Z,1510154093.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:53.929Z,1510154093.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:53.952Z,1510154093.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:54.332Z,1510154094.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:54.349Z,1510154094.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:54.720Z,1510154094.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:54.746Z,1510154094.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:55.116Z,1510154095.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:55.146Z,1510154095.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:55.543Z,1510154095.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:55.559Z,1510154095.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:55.916Z,1510154095.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:55.950Z,1510154095.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:56.335Z,1510154096.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:56.352Z,1510154096.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:56.992Z,1510154096.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:57.009Z,1510154097.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:57.120Z,1510154097.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:57.167Z,1510154097.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:57.540Z,1510154097.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:57.556Z,1510154097.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:57.935Z,1510154097.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:57.952Z,1510154097.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:58.340Z,1510154098.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:58.356Z,1510154098.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:58.716Z,1510154098.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:58.744Z,1510154098.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:59.116Z,1510154099.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:59.144Z,1510154099.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:59.552Z,1510154099.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:59.568Z,1510154099.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:14:59.932Z,1510154099.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:14:59.957Z,1510154099.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:00.599Z,1510154100.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:00.616Z,1510154100.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:00.724Z,1510154100.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:00.755Z,1510154100.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:01.143Z,1510154101.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:01.203Z,1510154101.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:01.544Z,1510154101.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:01.560Z,1510154101.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:01.942Z,1510154101.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:01.996Z,1510154101.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:02.323Z,1510154102.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:02.355Z,1510154102.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:02.727Z,1510154102.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:02.762Z,1510154102.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:03.125Z,1510154103.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:03.157Z,1510154103.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:03.552Z,1510154103.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:03.569Z,1510154103.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:03.924Z,1510154103.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:03.940Z,1510154103.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:04.338Z,1510154104.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:04.360Z,1510154104.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:05.012Z,1510154105.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:05.027Z,1510154105.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:05.130Z,1510154105.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:05.175Z,1510154105.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:05.550Z,1510154105.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:05.573Z,1510154105.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:05.956Z,1510154105.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:05.973Z,1510154105.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:06.341Z,1510154106.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:06.374Z,1510154106.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:06.740Z,1510154106.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:06.771Z,1510154106.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:07.132Z,1510154107.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:07.171Z,1510154107.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:07.560Z,1510154107.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:07.576Z,1510154107.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:07.957Z,1510154107.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:07.980Z,1510154107.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:08.622Z,1510154108.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:08.638Z,1510154108.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:08.779Z,1510154108.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:08.823Z,1510154108.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:09.187Z,1510154109.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:09.223Z,1510154109.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:09.587Z,1510154109.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:09.603Z,1510154109.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:09.982Z,1510154109.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:10.004Z,1510154110.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:10.376Z,1510154110.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:10.394Z,1510154110.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:10.773Z,1510154110.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:10.790Z,1510154110.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:11.175Z,1510154111.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:11.191Z,1510154111.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:11.598Z,1510154111.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:11.621Z,1510154111.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:11.977Z,1510154111.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:11.993Z,1510154111.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:12.381Z,1510154112.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:12.398Z,1510154112.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:13.071Z,1510154113.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:13.165Z,1510154113.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:13.287Z,1510154113.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:13.308Z,1510154113.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:13.691Z,1510154113.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:13.708Z,1510154113.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:14.095Z,1510154114.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:14.147Z,1510154114.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:14.491Z,1510154114.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:14.507Z,1510154114.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:14.884Z,1510154114.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:14.939Z,1510154114.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:15.285Z,1510154115.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:15.303Z,1510154115.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:15.702Z,1510154115.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:15.737Z,1510154115.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:16.091Z,1510154116.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:16.112Z,1510154116.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:16.757Z,1510154116.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:16.787Z,1510154116.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:16.904Z,1510154116.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:16.934Z,1510154116.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:17.318Z,1510154117.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:17.347Z,1510154117.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:17.729Z,1510154117.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:17.748Z,1510154117.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:18.114Z,1510154118.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:18.140Z,1510154118.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:18.511Z,1510154118.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:18.542Z,1510154118.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:18.908Z,1510154118.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:18.940Z,1510154118.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:19.309Z,1510154119.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:19.341Z,1510154119.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:19.736Z,1510154119.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:19.752Z,1510154119.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:20.112Z,1510154120.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:20.145Z,1510154120.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:20.526Z,1510154120.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:20.551Z,1510154120.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:21.198Z,1510154121.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:21.216Z,1510154121.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:21.329Z,1510154121.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:21.359Z,1510154121.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:21.748Z,1510154121.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:21.764Z,1510154121.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:22.144Z,1510154122.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:22.160Z,1510154122.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:22.549Z,1510154122.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:22.566Z,1510154122.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:22.927Z,1510154122.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:22.992Z,1510154122.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:23.324Z,1510154123.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:23.357Z,1510154123.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:23.756Z,1510154123.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:23.776Z,1510154123.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:24.147Z,1510154124.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:24.165Z,1510154124.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:24.798Z,1510154124.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:24.814Z,1510154124.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:24.928Z,1510154124.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:24.968Z,1510154124.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:25.347Z,1510154125.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:25.365Z,1510154125.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:25.743Z,1510154125.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:25.759Z,1510154125.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:26.149Z,1510154126.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:26.165Z,1510154126.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:26.524Z,1510154126.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:26.559Z,1510154126.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:26.927Z,1510154126.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:26.952Z,1510154126.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:27.329Z,1510154127.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:27.359Z,1510154127.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:27.755Z,1510154127.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:27.776Z,1510154127.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:28.123Z,1510154128.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:28.160Z,1510154128.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:28.547Z,1510154128.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:28.568Z,1510154128.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:30.265Z,1510154130.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:30.281Z,1510154130.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:30.413Z,1510154130.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:30.459Z,1510154130.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:30.840Z,1510154130.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:30.865Z,1510154130.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:31.240Z,1510154131.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:31.263Z,1510154131.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:31.630Z,1510154131.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:31.659Z,1510154131.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:32.019Z,1510154132.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:32.036Z,1510154132.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:32.422Z,1510154132.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:32.439Z,1510154132.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:32.845Z,1510154132.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:32.870Z,1510154132.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:33.234Z,1510154133.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:33.278Z,1510154133.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:33.912Z,1510154133.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:33.935Z,1510154133.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:34.037Z,1510154134.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:34.089Z,1510154134.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:34.464Z,1510154134.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:34.482Z,1510154134.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:34.864Z,1510154134.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:34.904Z,1510154134.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:35.268Z,1510154135.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:35.285Z,1510154135.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:35.643Z,1510154135.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:35.682Z,1510154135.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:36.043Z,1510154136.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:36.079Z,1510154136.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:36.440Z,1510154136.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:36.456Z,1510154136.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:36.879Z,1510154136.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:36.899Z,1510154136.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:37.246Z,1510154137.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:37.277Z,1510154137.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:37.653Z,1510154137.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:37.683Z,1510154137.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:38.338Z,1510154138.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:38.346Z,1510154138.346 [BPC1](ERROR): Failed to receive battery data
2017-11-08T15:15:38.346Z,1510154138.346 [BPC1] Communications Fault, FailCount= 1
2017-11-08T15:15:38.346Z,1510154138.346 [BPC1](ERROR): Communications Fault
2017-11-08T15:15:38.356Z,1510154138.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:38.457Z,1510154138.457 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T15:15:38.496Z,1510154138.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:38.521Z,1510154138.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:38.901Z,1510154138.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:38.939Z,1510154138.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:39.303Z,1510154139.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:39.336Z,1510154139.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:39.421Z,1510154139.421 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T15:15:39.421Z,1510154139.421 [BPC1] No Fault, FailCount= 1
2017-11-08T15:15:39.705Z,1510154139.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:39.784Z,1510154139.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:40.091Z,1510154140.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:40.107Z,1510154140.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:40.513Z,1510154140.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:40.544Z,1510154140.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:40.902Z,1510154140.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:40.937Z,1510154140.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:41.576Z,1510154141.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:41.592Z,1510154141.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:41.713Z,1510154141.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:41.751Z,1510154141.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:42.135Z,1510154142.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:42.152Z,1510154142.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:42.539Z,1510154142.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:42.554Z,1510154142.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:42.936Z,1510154142.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:42.959Z,1510154142.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:43.325Z,1510154143.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:43.341Z,1510154143.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:43.726Z,1510154143.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:43.741Z,1510154143.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:44.126Z,1510154144.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:44.142Z,1510154144.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:44.542Z,1510154144.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:44.558Z,1510154144.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:44.926Z,1510154144.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:44.941Z,1510154144.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:45.336Z,1510154145.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:45.352Z,1510154145.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:46.002Z,1510154146.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:46.038Z,1510154146.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:46.155Z,1510154146.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:46.197Z,1510154146.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:46.576Z,1510154146.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:46.593Z,1510154146.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:46.976Z,1510154146.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:46.992Z,1510154146.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:47.377Z,1510154147.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:47.393Z,1510154147.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:47.755Z,1510154147.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:47.791Z,1510154147.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:48.156Z,1510154148.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:48.203Z,1510154148.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:48.585Z,1510154148.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:48.601Z,1510154148.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:48.975Z,1510154148.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:48.992Z,1510154148.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:49.635Z,1510154149.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:49.651Z,1510154149.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:49.751Z,1510154149.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:49.783Z,1510154149.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:50.166Z,1510154150.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:50.200Z,1510154150.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:50.577Z,1510154150.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:50.592Z,1510154150.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:50.965Z,1510154150.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:50.994Z,1510154150.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:51.355Z,1510154151.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:51.390Z,1510154151.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:51.755Z,1510154151.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:51.792Z,1510154151.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:52.156Z,1510154152.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:52.188Z,1510154152.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:52.585Z,1510154152.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:52.601Z,1510154152.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:52.955Z,1510154152.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:52.971Z,1510154152.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:53.370Z,1510154153.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:53.397Z,1510154153.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:54.046Z,1510154154.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:54.063Z,1510154154.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:54.203Z,1510154154.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:54.219Z,1510154154.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:54.609Z,1510154154.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:54.641Z,1510154154.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:55.013Z,1510154155.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:55.038Z,1510154155.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:55.413Z,1510154155.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:55.439Z,1510154155.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:55.799Z,1510154155.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:55.819Z,1510154155.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:56.199Z,1510154156.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:56.246Z,1510154156.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:56.626Z,1510154156.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:56.643Z,1510154156.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:57.013Z,1510154157.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:57.040Z,1510154157.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:57.688Z,1510154157.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:57.705Z,1510154157.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:57.815Z,1510154157.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:57.863Z,1510154157.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:58.237Z,1510154158.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:58.253Z,1510154158.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:58.630Z,1510154158.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:58.672Z,1510154158.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:59.032Z,1510154159.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:59.049Z,1510154159.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:59.416Z,1510154159.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:59.446Z,1510154159.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:15:59.815Z,1510154159.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:15:59.863Z,1510154159.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:00.216Z,1510154160.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:00.249Z,1510154160.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:00.647Z,1510154160.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:00.694Z,1510154160.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:01.015Z,1510154161.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:01.046Z,1510154161.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:01.436Z,1510154161.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:01.459Z,1510154161.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:02.097Z,1510154162.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:02.113Z,1510154162.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:02.213Z,1510154162.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:02.252Z,1510154162.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:02.635Z,1510154162.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:02.651Z,1510154162.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:03.039Z,1510154163.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:03.055Z,1510154163.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:03.435Z,1510154163.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:03.451Z,1510154163.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:03.819Z,1510154163.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:03.867Z,1510154163.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:04.220Z,1510154164.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:04.255Z,1510154164.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:04.647Z,1510154164.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:04.664Z,1510154164.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:05.033Z,1510154165.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:05.066Z,1510154165.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:05.694Z,1510154165.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:05.710Z,1510154165.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:05.821Z,1510154165.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:05.867Z,1510154165.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:06.244Z,1510154166.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:06.260Z,1510154166.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:06.647Z,1510154166.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:06.662Z,1510154166.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:07.044Z,1510154167.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:07.060Z,1510154167.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:07.427Z,1510154167.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:07.458Z,1510154167.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:07.827Z,1510154167.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:07.858Z,1510154167.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:08.225Z,1510154168.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:08.258Z,1510154168.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:08.659Z,1510154168.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:08.680Z,1510154168.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:09.024Z,1510154169.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:09.069Z,1510154169.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:09.448Z,1510154169.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:09.464Z,1510154169.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:10.150Z,1510154170.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:10.166Z,1510154170.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:10.275Z,1510154170.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:10.301Z,1510154170.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:10.692Z,1510154170.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:10.708Z,1510154170.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:11.092Z,1510154171.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:11.115Z,1510154171.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:11.493Z,1510154171.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:11.509Z,1510154171.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:11.871Z,1510154171.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:11.906Z,1510154171.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:12.276Z,1510154172.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:12.307Z,1510154172.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:12.705Z,1510154172.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:12.721Z,1510154172.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:13.093Z,1510154173.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:13.109Z,1510154173.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:13.754Z,1510154173.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:13.771Z,1510154173.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:13.869Z,1510154173.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:13.911Z,1510154173.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:14.293Z,1510154174.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:14.309Z,1510154174.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:14.690Z,1510154174.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:14.716Z,1510154174.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:15.086Z,1510154175.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:15.121Z,1510154175.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:15.475Z,1510154175.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:15.505Z,1510154175.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:15.875Z,1510154175.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:15.892Z,1510154175.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:16.276Z,1510154176.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:16.293Z,1510154176.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:16.713Z,1510154176.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:16.729Z,1510154176.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:17.075Z,1510154177.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:17.096Z,1510154177.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:17.489Z,1510154177.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:17.521Z,1510154177.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:18.167Z,1510154178.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:18.191Z,1510154178.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:18.303Z,1510154178.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:18.351Z,1510154178.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:18.725Z,1510154178.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:18.741Z,1510154178.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:19.119Z,1510154179.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:19.137Z,1510154179.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:19.520Z,1510154179.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:19.594Z,1510154179.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:19.903Z,1510154179.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:19.932Z,1510154179.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:20.300Z,1510154180.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:20.333Z,1510154180.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:20.726Z,1510154180.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:20.747Z,1510154180.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:21.124Z,1510154181.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:21.184Z,1510154181.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:21.786Z,1510154181.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:21.802Z,1510154181.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:21.907Z,1510154181.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:21.940Z,1510154181.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:22.328Z,1510154182.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:22.387Z,1510154182.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:22.726Z,1510154182.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:22.742Z,1510154182.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:23.114Z,1510154183.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:23.176Z,1510154183.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:23.508Z,1510154183.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:23.539Z,1510154183.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:23.907Z,1510154183.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:23.938Z,1510154183.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:24.312Z,1510154184.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:24.337Z,1510154184.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:24.739Z,1510154184.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:24.760Z,1510154184.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:25.107Z,1510154185.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:25.140Z,1510154185.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:25.529Z,1510154185.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:25.545Z,1510154185.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:26.193Z,1510154186.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:26.209Z,1510154186.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:26.348Z,1510154186.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:26.387Z,1510154186.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:26.754Z,1510154186.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:26.786Z,1510154186.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:27.161Z,1510154187.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:27.185Z,1510154187.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:27.558Z,1510154187.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:27.582Z,1510154187.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:27.947Z,1510154187.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:27.987Z,1510154187.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:28.348Z,1510154188.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:28.364Z,1510154188.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:28.771Z,1510154188.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:28.787Z,1510154188.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:29.157Z,1510154189.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:29.181Z,1510154189.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:29.828Z,1510154189.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:29.844Z,1510154189.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:29.958Z,1510154189.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:29.992Z,1510154189.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:30.380Z,1510154190.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:30.396Z,1510154190.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:30.779Z,1510154190.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:30.804Z,1510154190.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:31.178Z,1510154191.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:31.233Z,1510154191.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:31.563Z,1510154191.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:31.596Z,1510154191.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:31.960Z,1510154191.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:31.991Z,1510154191.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:32.361Z,1510154192.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:32.391Z,1510154192.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:32.791Z,1510154192.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:32.807Z,1510154192.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:33.160Z,1510154193.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:33.192Z,1510154193.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:33.577Z,1510154193.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:33.609Z,1510154193.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:34.258Z,1510154194.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:34.274Z,1510154194.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:34.399Z,1510154194.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:34.439Z,1510154194.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:34.814Z,1510154194.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:34.851Z,1510154194.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:35.218Z,1510154195.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:35.252Z,1510154195.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:35.618Z,1510154195.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:35.650Z,1510154195.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:36.003Z,1510154196.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:36.045Z,1510154196.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:36.405Z,1510154196.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:36.427Z,1510154196.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:36.822Z,1510154196.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:36.854Z,1510154196.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:37.219Z,1510154197.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:37.240Z,1510154197.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:37.917Z,1510154197.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:37.933Z,1510154197.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:38.042Z,1510154198.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:38.076Z,1510154198.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:38.469Z,1510154198.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:38.516Z,1510154198.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:38.869Z,1510154198.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:38.889Z,1510154198.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:39.263Z,1510154199.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:39.319Z,1510154199.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:39.650Z,1510154199.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:39.719Z,1510154199.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:40.044Z,1510154200.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:40.158Z,1510154200.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:40.449Z,1510154200.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:40.479Z,1510154200.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:40.883Z,1510154200.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:40.903Z,1510154200.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:41.248Z,1510154201.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:41.291Z,1510154201.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:41.663Z,1510154201.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:41.707Z,1510154201.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:42.342Z,1510154202.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:42.348Z,1510154202.348 [PNI_TCM](ERROR): CRC does not match. Expected:0x43647 got:0x17048
2017-11-08T15:16:42.400Z,1510154202.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:42.511Z,1510154202.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:42.541Z,1510154202.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:42.933Z,1510154202.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:43.007Z,1510154203.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:43.337Z,1510154203.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:43.358Z,1510154203.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:43.728Z,1510154203.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:43.745Z,1510154203.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:44.116Z,1510154204.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:44.190Z,1510154204.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:44.544Z,1510154204.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:44.560Z,1510154204.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:44.933Z,1510154204.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:44.989Z,1510154204.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:45.593Z,1510154205.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:45.609Z,1510154205.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:45.708Z,1510154205.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:45.755Z,1510154205.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:46.126Z,1510154206.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:46.159Z,1510154206.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:46.526Z,1510154206.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:46.552Z,1510154206.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:46.922Z,1510154206.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:46.949Z,1510154206.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:47.312Z,1510154207.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:47.328Z,1510154207.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:47.712Z,1510154207.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:47.728Z,1510154207.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:48.112Z,1510154208.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:48.130Z,1510154208.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:48.549Z,1510154208.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:48.565Z,1510154208.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:48.915Z,1510154208.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:48.931Z,1510154208.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:49.326Z,1510154209.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:49.359Z,1510154209.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:50.007Z,1510154210.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:50.024Z,1510154210.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:50.125Z,1510154210.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:50.155Z,1510154210.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:50.550Z,1510154210.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:50.566Z,1510154210.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:50.953Z,1510154210.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:50.970Z,1510154210.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:51.350Z,1510154211.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:51.367Z,1510154211.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:51.731Z,1510154211.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:51.764Z,1510154211.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:52.131Z,1510154212.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:52.163Z,1510154212.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:52.563Z,1510154212.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:52.581Z,1510154212.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:52.952Z,1510154212.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:52.969Z,1510154212.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:53.617Z,1510154213.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:53.670Z,1510154213.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:53.778Z,1510154213.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:53.803Z,1510154213.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:54.194Z,1510154214.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:54.222Z,1510154214.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:54.594Z,1510154214.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:54.628Z,1510154214.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:55.006Z,1510154215.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:55.022Z,1510154215.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:55.384Z,1510154215.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:55.417Z,1510154215.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:55.780Z,1510154215.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:55.796Z,1510154215.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:56.185Z,1510154216.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:56.201Z,1510154216.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:56.614Z,1510154216.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:56.644Z,1510154216.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:56.983Z,1510154216.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:56.999Z,1510154216.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:57.397Z,1510154217.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:57.439Z,1510154217.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:58.077Z,1510154218.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:58.093Z,1510154218.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:58.193Z,1510154218.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:58.235Z,1510154218.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:58.622Z,1510154218.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:58.639Z,1510154218.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:59.020Z,1510154219.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:59.037Z,1510154219.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:59.406Z,1510154219.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:59.439Z,1510154219.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:16:59.799Z,1510154219.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:16:59.832Z,1510154219.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:00.200Z,1510154220.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:00.233Z,1510154220.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:00.627Z,1510154220.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:00.645Z,1510154220.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:01.013Z,1510154221.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:01.062Z,1510154221.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:01.689Z,1510154221.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:01.705Z,1510154221.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:01.805Z,1510154221.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:01.847Z,1510154221.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:02.233Z,1510154222.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:02.250Z,1510154222.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:02.627Z,1510154222.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:02.644Z,1510154222.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:03.024Z,1510154223.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:03.041Z,1510154223.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:03.412Z,1510154223.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:03.446Z,1510154223.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:03.811Z,1510154223.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:03.844Z,1510154223.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:04.208Z,1510154224.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:04.242Z,1510154224.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:04.639Z,1510154224.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:04.700Z,1510154224.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:05.011Z,1510154225.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:05.042Z,1510154225.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:05.431Z,1510154225.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:05.508Z,1510154225.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:06.094Z,1510154226.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:06.110Z,1510154226.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:06.217Z,1510154226.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:06.259Z,1510154226.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:06.639Z,1510154226.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:06.660Z,1510154226.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:07.043Z,1510154227.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:07.094Z,1510154227.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:07.439Z,1510154227.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:07.459Z,1510154227.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:07.827Z,1510154227.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:07.886Z,1510154227.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:08.219Z,1510154228.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:08.252Z,1510154228.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:08.642Z,1510154228.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:08.664Z,1510154228.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:09.043Z,1510154229.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:09.059Z,1510154229.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:09.705Z,1510154229.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:09.741Z,1510154229.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:09.853Z,1510154229.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:09.903Z,1510154229.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:10.280Z,1510154230.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:10.296Z,1510154230.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:10.669Z,1510154230.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:10.699Z,1510154230.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:11.070Z,1510154231.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:11.101Z,1510154231.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:11.460Z,1510154231.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:11.484Z,1510154231.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:11.859Z,1510154231.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:11.875Z,1510154231.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:12.256Z,1510154232.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:12.273Z,1510154232.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:12.691Z,1510154232.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:12.707Z,1510154232.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:13.055Z,1510154233.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:13.071Z,1510154233.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:13.473Z,1510154233.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:13.500Z,1510154233.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:15.165Z,1510154235.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:15.202Z,1510154235.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:15.320Z,1510154235.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:15.356Z,1510154235.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:15.740Z,1510154235.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:15.763Z,1510154235.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:16.136Z,1510154236.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:16.177Z,1510154236.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:16.541Z,1510154236.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:16.558Z,1510154236.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:16.920Z,1510154236.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:16.953Z,1510154236.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:17.316Z,1510154237.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:17.353Z,1510154237.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:17.752Z,1510154237.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:17.776Z,1510154237.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:18.141Z,1510154238.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:18.157Z,1510154238.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:18.796Z,1510154238.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:18.812Z,1510154238.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:18.918Z,1510154238.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:18.934Z,1510154238.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:19.337Z,1510154239.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:19.371Z,1510154239.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:19.733Z,1510154239.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:19.761Z,1510154239.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:20.138Z,1510154240.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:20.168Z,1510154240.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:20.523Z,1510154240.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:20.559Z,1510154240.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:20.919Z,1510154240.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:20.934Z,1510154240.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:21.324Z,1510154241.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:21.341Z,1510154241.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:21.756Z,1510154241.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:21.773Z,1510154241.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:22.123Z,1510154242.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:22.138Z,1510154242.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:22.540Z,1510154242.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:22.576Z,1510154242.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:23.218Z,1510154243.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:23.240Z,1510154243.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:23.375Z,1510154243.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:23.391Z,1510154243.391 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:23.392Z,1510154243.392 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2017-11-08T15:17:23.392Z,1510154243.392 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T15:17:23.394Z,1510154243.394 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:23.394Z,1510154243.394 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38
2017-11-08T15:17:23.395Z,1510154243.395 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T15:17:23.396Z,1510154243.396 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:23.396Z,1510154243.396 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 38
2017-11-08T15:17:23.405Z,1510154243.405 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T15:17:23.485Z,1510154243.485 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T15:17:23.485Z,1510154243.485 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T15:17:23.485Z,1510154243.485 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T15:17:23.786Z,1510154243.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:23.893Z,1510154243.893 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T15:17:23.893Z,1510154243.893 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2017-11-08T15:17:23.893Z,1510154243.893 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T15:17:23.893Z,1510154243.893 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38
2017-11-08T15:17:23.894Z,1510154243.894 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T15:17:23.894Z,1510154243.894 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 38
2017-11-08T15:17:24.182Z,1510154244.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:24.198Z,1510154244.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T15:17:24.198Z,1510154244.198 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:17:24.198Z,1510154244.198 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:17:24.199Z,1510154244.199 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T15:17:24.199Z,1510154244.199 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:17:24.200Z,1510154244.200 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:17:24.200Z,1510154244.200 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T15:17:24.201Z,1510154244.201 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:17:24.202Z,1510154244.202 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:17:24.578Z,1510154244.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:24.594Z,1510154244.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T15:17:24.595Z,1510154244.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:24.977Z,1510154244.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:24.997Z,1510154244.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T15:17:24.998Z,1510154244.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:25.378Z,1510154245.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:25.394Z,1510154245.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T15:17:25.395Z,1510154245.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:25.792Z,1510154245.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:25.808Z,1510154245.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T15:17:25.817Z,1510154245.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:26.186Z,1510154246.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:26.202Z,1510154246.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T15:17:26.203Z,1510154246.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:26.854Z,1510154246.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:26.906Z,1510154246.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2017-11-08T15:17:26.907Z,1510154246.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:27.043Z,1510154247.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:27.059Z,1510154247.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2017-11-08T15:17:27.060Z,1510154247.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:27.451Z,1510154247.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:27.483Z,1510154247.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-08T15:17:27.484Z,1510154247.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:27.851Z,1510154247.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:27.895Z,1510154247.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-08T15:17:27.896Z,1510154247.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:28.243Z,1510154248.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:28.259Z,1510154248.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-08T15:17:28.261Z,1510154248.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:28.640Z,1510154248.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:28.687Z,1510154248.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-08T15:17:28.688Z,1510154248.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:29.040Z,1510154249.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:29.064Z,1510154249.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-08T15:17:29.065Z,1510154249.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:29.438Z,1510154249.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:29.490Z,1510154249.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-08T15:17:29.491Z,1510154249.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:29.862Z,1510154249.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:29.890Z,1510154249.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-08T15:17:29.891Z,1510154249.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:30.240Z,1510154250.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:30.256Z,1510154250.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T15:17:30.257Z,1510154250.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:30.645Z,1510154250.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:30.661Z,1510154250.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-08T15:17:30.662Z,1510154250.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:31.327Z,1510154251.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:31.343Z,1510154251.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T15:17:31.344Z,1510154251.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:31.457Z,1510154251.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:31.502Z,1510154251.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T15:17:31.503Z,1510154251.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:31.883Z,1510154251.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:31.900Z,1510154251.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T15:17:31.901Z,1510154251.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:32.284Z,1510154252.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:32.307Z,1510154252.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T15:17:32.308Z,1510154252.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:32.670Z,1510154252.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:32.697Z,1510154252.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T15:17:32.698Z,1510154252.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:33.064Z,1510154253.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:33.092Z,1510154253.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T15:17:33.098Z,1510154253.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:33.495Z,1510154253.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:33.511Z,1510154253.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T15:17:33.513Z,1510154253.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:33.885Z,1510154253.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:33.900Z,1510154253.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T15:17:33.901Z,1510154253.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:34.549Z,1510154254.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:34.565Z,1510154254.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T15:17:34.566Z,1510154254.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:34.703Z,1510154254.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:34.746Z,1510154254.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2017-11-08T15:17:34.747Z,1510154254.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:35.110Z,1510154255.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:35.142Z,1510154255.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2017-11-08T15:17:35.143Z,1510154255.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:35.509Z,1510154255.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:35.525Z,1510154255.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T15:17:35.526Z,1510154255.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:35.910Z,1510154255.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:35.926Z,1510154255.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T15:17:35.927Z,1510154255.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:36.300Z,1510154256.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:36.315Z,1510154256.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T15:17:36.316Z,1510154256.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:36.697Z,1510154256.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:36.712Z,1510154256.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T15:17:36.713Z,1510154256.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:37.102Z,1510154257.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:37.118Z,1510154257.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T15:17:37.119Z,1510154257.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:37.525Z,1510154257.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:37.595Z,1510154257.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2017-11-08T15:17:37.596Z,1510154257.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:37.900Z,1510154257.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:37.923Z,1510154257.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T15:17:37.924Z,1510154257.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:38.309Z,1510154258.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:38.325Z,1510154258.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T15:17:38.326Z,1510154258.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:38.992Z,1510154258.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:39.015Z,1510154259.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T15:17:39.016Z,1510154259.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:39.117Z,1510154259.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:39.163Z,1510154259.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-08T15:17:39.163Z,1510154259.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:39.537Z,1510154259.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:39.560Z,1510154259.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-08T15:17:39.562Z,1510154259.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:39.940Z,1510154259.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:39.956Z,1510154259.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-08T15:17:39.957Z,1510154259.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:40.340Z,1510154260.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:40.361Z,1510154260.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-11-08T15:17:40.362Z,1510154260.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:40.724Z,1510154260.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:40.758Z,1510154260.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-08T15:17:40.759Z,1510154260.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:41.120Z,1510154261.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:41.148Z,1510154261.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-08T15:17:41.153Z,1510154261.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:41.551Z,1510154261.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:41.567Z,1510154261.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-08T15:17:41.568Z,1510154261.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:41.945Z,1510154261.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:41.961Z,1510154261.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-08T15:17:41.962Z,1510154261.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:42.605Z,1510154262.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:42.621Z,1510154262.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T15:17:42.622Z,1510154262.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:42.721Z,1510154262.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:42.766Z,1510154262.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-08T15:17:42.767Z,1510154262.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:43.147Z,1510154263.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:43.167Z,1510154263.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-08T15:17:43.168Z,1510154263.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:43.545Z,1510154263.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:43.561Z,1510154263.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:43.948Z,1510154263.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:43.964Z,1510154263.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:44.328Z,1510154264.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:44.363Z,1510154264.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:44.728Z,1510154264.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:44.760Z,1510154264.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:45.129Z,1510154265.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:45.161Z,1510154265.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:45.561Z,1510154265.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:45.578Z,1510154265.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:45.928Z,1510154265.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:45.960Z,1510154265.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:46.338Z,1510154266.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:46.366Z,1510154266.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:47.018Z,1510154267.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:47.039Z,1510154267.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:47.178Z,1510154267.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:47.223Z,1510154267.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:47.586Z,1510154267.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:47.602Z,1510154267.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:47.986Z,1510154267.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:48.051Z,1510154268.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:48.388Z,1510154268.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:48.408Z,1510154268.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:48.783Z,1510154268.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:48.799Z,1510154268.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:49.194Z,1510154269.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:49.260Z,1510154269.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:49.599Z,1510154269.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:49.653Z,1510154269.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:49.988Z,1510154269.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:50.011Z,1510154270.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:50.668Z,1510154270.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:50.708Z,1510154270.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:50.842Z,1510154270.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:50.891Z,1510154270.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:51.258Z,1510154271.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:51.315Z,1510154271.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:51.664Z,1510154271.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:51.696Z,1510154271.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:52.058Z,1510154272.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:52.093Z,1510154272.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:52.460Z,1510154272.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:52.505Z,1510154272.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:52.847Z,1510154272.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:52.868Z,1510154272.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:53.254Z,1510154273.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:53.295Z,1510154273.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:53.674Z,1510154273.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:53.699Z,1510154273.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:54.065Z,1510154274.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:54.094Z,1510154274.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:54.736Z,1510154274.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:54.743Z,1510154274.743 [PNI_TCM](ERROR): CRC does not match. Expected:0x2373 got:0x16644
2017-11-08T15:17:54.772Z,1510154274.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:54.902Z,1510154274.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:54.923Z,1510154274.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:55.318Z,1510154275.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:55.353Z,1510154275.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:55.717Z,1510154275.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:55.754Z,1510154275.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:56.110Z,1510154276.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:56.126Z,1510154276.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:56.505Z,1510154276.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:56.527Z,1510154276.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:56.906Z,1510154276.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:56.926Z,1510154276.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:57.307Z,1510154277.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:57.327Z,1510154277.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:57.726Z,1510154277.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:57.754Z,1510154277.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:58.113Z,1510154278.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:58.135Z,1510154278.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:58.793Z,1510154278.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:58.808Z,1510154278.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:58.914Z,1510154278.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:58.938Z,1510154278.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:59.330Z,1510154279.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:59.376Z,1510154279.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:17:59.725Z,1510154279.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:17:59.741Z,1510154279.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:00.130Z,1510154280.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:00.147Z,1510154280.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:00.522Z,1510154280.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:00.538Z,1510154280.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:00.922Z,1510154280.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:00.938Z,1510154280.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:01.323Z,1510154281.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:01.339Z,1510154281.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:01.746Z,1510154281.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:01.776Z,1510154281.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:02.121Z,1510154282.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:02.137Z,1510154282.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:02.530Z,1510154282.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:02.546Z,1510154282.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:03.208Z,1510154283.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:03.224Z,1510154283.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:03.347Z,1510154283.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:03.378Z,1510154283.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:03.768Z,1510154283.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:03.785Z,1510154283.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:04.164Z,1510154284.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:04.231Z,1510154284.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:04.564Z,1510154284.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:04.581Z,1510154284.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:04.948Z,1510154284.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:04.000Z,1510154285.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:05.344Z,1510154285.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:05.387Z,1510154285.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:05.773Z,1510154285.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:05.789Z,1510154285.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:06.166Z,1510154286.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:06.223Z,1510154286.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:06.833Z,1510154286.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:06.849Z,1510154286.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:06.953Z,1510154286.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:07.020Z,1510154287.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:07.382Z,1510154287.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:07.399Z,1510154287.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:07.780Z,1510154287.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:07.797Z,1510154287.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:08.173Z,1510154288.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:08.190Z,1510154288.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:08.555Z,1510154288.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:08.592Z,1510154288.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:08.956Z,1510154288.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:08.991Z,1510154288.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:09.357Z,1510154289.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:09.388Z,1510154289.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:09.788Z,1510154289.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:09.805Z,1510154289.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:10.160Z,1510154290.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:10.192Z,1510154290.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:10.578Z,1510154290.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:10.595Z,1510154290.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:11.246Z,1510154291.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:11.261Z,1510154291.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:11.394Z,1510154291.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:11.411Z,1510154291.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:11.810Z,1510154291.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:11.843Z,1510154291.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:12.213Z,1510154292.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:12.241Z,1510154292.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:12.614Z,1510154292.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:12.640Z,1510154292.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:12.000Z,1510154293.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:13.016Z,1510154293.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:13.396Z,1510154293.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:13.413Z,1510154293.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:13.828Z,1510154293.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:13.845Z,1510154293.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:14.213Z,1510154294.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:14.242Z,1510154294.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:14.917Z,1510154294.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:14.938Z,1510154294.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:15.050Z,1510154295.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:15.111Z,1510154295.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:15.466Z,1510154295.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:15.503Z,1510154295.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:15.878Z,1510154295.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:15.899Z,1510154295.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:16.266Z,1510154296.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:16.299Z,1510154296.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:16.655Z,1510154296.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:16.688Z,1510154296.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:17.056Z,1510154297.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:17.089Z,1510154297.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:17.452Z,1510154297.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:17.469Z,1510154297.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:17.890Z,1510154297.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:17.906Z,1510154297.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:18.256Z,1510154298.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:18.300Z,1510154298.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:18.669Z,1510154298.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:18.702Z,1510154298.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:19.347Z,1510154299.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:19.363Z,1510154299.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:19.466Z,1510154299.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:19.517Z,1510154299.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:19.891Z,1510154299.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:19.927Z,1510154299.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:20.281Z,1510154300.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:20.307Z,1510154300.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:20.682Z,1510154300.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:20.708Z,1510154300.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:21.073Z,1510154301.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:21.098Z,1510154301.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:21.500Z,1510154301.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:21.516Z,1510154301.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:21.882Z,1510154301.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:21.916Z,1510154301.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:22.570Z,1510154302.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:22.607Z,1510154302.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:22.723Z,1510154302.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:22.760Z,1510154302.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:23.130Z,1510154303.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:23.160Z,1510154303.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:23.530Z,1510154303.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:23.555Z,1510154303.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:23.924Z,1510154303.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:23.961Z,1510154303.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:24.317Z,1510154304.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:24.342Z,1510154304.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:24.714Z,1510154304.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:24.742Z,1510154304.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:25.118Z,1510154305.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:25.135Z,1510154305.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:25.538Z,1510154305.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:25.563Z,1510154305.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:25.920Z,1510154305.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:25.980Z,1510154305.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:26.327Z,1510154306.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:26.343Z,1510154306.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:27.265Z,1510154307.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:27.301Z,1510154307.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:27.437Z,1510154307.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:27.453Z,1510154307.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:27.854Z,1510154307.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:27.923Z,1510154307.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:28.257Z,1510154308.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:28.282Z,1510154308.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:28.651Z,1510154308.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:28.700Z,1510154308.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:29.039Z,1510154309.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:29.059Z,1510154309.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:29.444Z,1510154309.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:29.460Z,1510154309.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:29.872Z,1510154309.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:29.895Z,1510154309.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:30.258Z,1510154310.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:30.284Z,1510154310.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:30.924Z,1510154310.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:30.940Z,1510154310.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:31.053Z,1510154311.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:31.091Z,1510154311.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:31.475Z,1510154311.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:31.495Z,1510154311.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:31.879Z,1510154311.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:31.895Z,1510154311.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:32.276Z,1510154312.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:32.292Z,1510154312.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:32.659Z,1510154312.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:32.693Z,1510154312.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:33.056Z,1510154313.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:33.088Z,1510154313.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:33.487Z,1510154313.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:33.507Z,1510154313.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:33.855Z,1510154313.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:33.886Z,1510154313.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:34.259Z,1510154314.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:34.291Z,1510154314.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:34.673Z,1510154314.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:34.695Z,1510154314.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:35.351Z,1510154315.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:35.383Z,1510154315.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:35.497Z,1510154315.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:35.547Z,1510154315.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:35.923Z,1510154315.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:35.939Z,1510154315.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:36.323Z,1510154316.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:36.338Z,1510154316.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:36.724Z,1510154316.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:36.781Z,1510154316.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:37.108Z,1510154317.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:37.133Z,1510154317.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:37.531Z,1510154317.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:37.551Z,1510154317.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:37.924Z,1510154317.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:37.941Z,1510154317.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:38.597Z,1510154318.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:38.633Z,1510154318.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:38.741Z,1510154318.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:38.790Z,1510154318.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:39.162Z,1510154319.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:39.195Z,1510154319.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:39.557Z,1510154319.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:39.591Z,1510154319.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:39.953Z,1510154319.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:39.986Z,1510154319.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:40.348Z,1510154320.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:40.364Z,1510154320.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:40.752Z,1510154320.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:40.768Z,1510154320.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:41.150Z,1510154321.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:41.167Z,1510154321.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:41.578Z,1510154321.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:41.594Z,1510154321.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:41.951Z,1510154321.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:41.968Z,1510154321.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:42.361Z,1510154322.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:42.385Z,1510154322.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:43.039Z,1510154323.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:43.055Z,1510154323.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:43.161Z,1510154323.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:43.195Z,1510154323.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:43.584Z,1510154323.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:43.600Z,1510154323.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:43.988Z,1510154323.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:44.004Z,1510154324.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:44.384Z,1510154324.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:44.400Z,1510154324.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:44.767Z,1510154324.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:44.806Z,1510154324.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:45.168Z,1510154325.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:45.200Z,1510154325.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:45.590Z,1510154325.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:45.612Z,1510154325.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:45.988Z,1510154325.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:46.012Z,1510154326.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:46.650Z,1510154326.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:46.689Z,1510154326.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:46.800Z,1510154326.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:46.843Z,1510154326.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:47.218Z,1510154327.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:47.248Z,1510154327.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:47.617Z,1510154327.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:47.636Z,1510154327.636 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T15:18:47.636Z,1510154327.636 [BPC1] Data Fault, FailCount= 1
2017-11-08T15:18:47.636Z,1510154327.636 [BPC1](ERROR): Data Fault
2017-11-08T15:18:47.645Z,1510154327.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:47.729Z,1510154327.729 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T15:18:48.018Z,1510154328.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:48.047Z,1510154328.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:48.407Z,1510154328.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:48.442Z,1510154328.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:48.807Z,1510154328.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:48.844Z,1510154328.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:48.929Z,1510154328.929 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T15:18:48.929Z,1510154328.929 [BPC1] No Fault, FailCount= 1
2017-11-08T15:18:49.204Z,1510154329.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:49.284Z,1510154329.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:49.636Z,1510154329.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:49.652Z,1510154329.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:50.003Z,1510154330.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:50.019Z,1510154330.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:50.417Z,1510154330.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:50.452Z,1510154330.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:51.094Z,1510154331.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:51.111Z,1510154331.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:51.245Z,1510154331.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:51.290Z,1510154331.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:51.650Z,1510154331.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:51.666Z,1510154331.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:52.049Z,1510154332.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:52.088Z,1510154332.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:52.450Z,1510154332.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:52.485Z,1510154332.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:52.841Z,1510154332.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:52.885Z,1510154332.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:53.241Z,1510154333.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:53.256Z,1510154333.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:53.663Z,1510154333.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:53.686Z,1510154333.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:54.050Z,1510154334.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:54.085Z,1510154334.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:54.724Z,1510154334.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:54.741Z,1510154334.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:54.848Z,1510154334.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:54.899Z,1510154334.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:55.267Z,1510154335.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:55.302Z,1510154335.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:55.666Z,1510154335.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:55.696Z,1510154335.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:56.065Z,1510154336.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:56.108Z,1510154336.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:56.455Z,1510154336.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:56.499Z,1510154336.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:56.851Z,1510154336.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:56.892Z,1510154336.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:57.258Z,1510154337.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:57.291Z,1510154337.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:57.690Z,1510154337.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:57.744Z,1510154337.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:58.055Z,1510154338.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:58.089Z,1510154338.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:58.478Z,1510154338.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:58.499Z,1510154338.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:59.809Z,1510154339.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:59.837Z,1510154339.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:18:59.953Z,1510154339.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:18:59.000Z,1510154340.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:00.379Z,1510154340.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:00.397Z,1510154340.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:00.776Z,1510154340.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:00.794Z,1510154340.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:01.180Z,1510154341.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:01.198Z,1510154341.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:01.559Z,1510154341.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:01.588Z,1510154341.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:01.959Z,1510154341.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:01.994Z,1510154341.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:02.360Z,1510154342.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:02.396Z,1510154342.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:02.787Z,1510154342.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:02.803Z,1510154342.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:03.185Z,1510154343.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:03.203Z,1510154343.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:03.844Z,1510154343.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:03.860Z,1510154343.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:03.972Z,1510154343.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:04.016Z,1510154344.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:04.386Z,1510154344.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:04.418Z,1510154344.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:04.785Z,1510154344.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:04.813Z,1510154344.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:05.186Z,1510154345.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:05.220Z,1510154345.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:05.572Z,1510154345.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:05.588Z,1510154345.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:05.971Z,1510154345.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:05.989Z,1510154345.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:06.373Z,1510154346.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:06.406Z,1510154346.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:06.798Z,1510154346.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:06.822Z,1510154346.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:07.174Z,1510154347.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:07.191Z,1510154347.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:07.594Z,1510154347.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:07.619Z,1510154347.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:08.263Z,1510154348.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:08.279Z,1510154348.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:08.381Z,1510154348.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:08.436Z,1510154348.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:08.798Z,1510154348.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:08.830Z,1510154348.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:09.216Z,1510154349.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:09.239Z,1510154349.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:09.598Z,1510154349.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:09.651Z,1510154349.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:09.989Z,1510154349.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:10.024Z,1510154350.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:10.388Z,1510154350.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:10.439Z,1510154350.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:10.809Z,1510154350.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:10.834Z,1510154350.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:11.202Z,1510154351.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:11.248Z,1510154351.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:11.875Z,1510154351.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:11.891Z,1510154351.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:12.010Z,1510154352.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:12.045Z,1510154352.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:12.432Z,1510154352.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:12.449Z,1510154352.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:12.832Z,1510154352.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:12.848Z,1510154352.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:13.232Z,1510154353.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:13.249Z,1510154353.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:13.624Z,1510154353.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:13.640Z,1510154353.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:14.022Z,1510154354.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:14.038Z,1510154354.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:14.412Z,1510154354.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:14.441Z,1510154354.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:14.841Z,1510154354.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:14.862Z,1510154354.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:15.211Z,1510154355.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:15.237Z,1510154355.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:15.637Z,1510154355.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:15.653Z,1510154355.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:16.309Z,1510154356.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:16.332Z,1510154356.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:16.445Z,1510154356.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:16.491Z,1510154356.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:16.866Z,1510154356.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:16.886Z,1510154356.886 [PNI_TCM](ERROR): CRC does not match. Expected:0x7704 got:0x40220
2017-11-08T15:19:16.915Z,1510154356.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:17.262Z,1510154357.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:17.282Z,1510154357.282 [PNI_TCM](ERROR): CRC does not match. Expected:0x11434 got:0x1857
2017-11-08T15:19:17.301Z,1510154357.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:17.659Z,1510154357.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:17.690Z,1510154357.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:18.055Z,1510154358.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:18.089Z,1510154358.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:18.489Z,1510154358.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:18.506Z,1510154358.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:18.872Z,1510154358.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:18.900Z,1510154358.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:19.545Z,1510154359.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:19.595Z,1510154359.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:19.707Z,1510154359.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:19.724Z,1510154359.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:20.127Z,1510154360.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:20.158Z,1510154360.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:20.537Z,1510154360.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:20.553Z,1510154360.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:20.926Z,1510154360.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:20.959Z,1510154360.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:21.311Z,1510154361.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:21.344Z,1510154361.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:21.715Z,1510154361.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:21.731Z,1510154361.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:22.113Z,1510154362.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:22.129Z,1510154362.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:22.544Z,1510154362.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:22.568Z,1510154362.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:22.912Z,1510154362.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:22.928Z,1510154362.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:23.330Z,1510154363.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:23.358Z,1510154363.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:24.006Z,1510154364.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:24.022Z,1510154364.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:24.121Z,1510154364.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:24.146Z,1510154364.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:24.538Z,1510154364.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:24.570Z,1510154364.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:24.938Z,1510154364.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:24.970Z,1510154364.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:25.338Z,1510154365.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:25.372Z,1510154365.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:25.727Z,1510154365.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:25.757Z,1510154365.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:26.127Z,1510154366.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:26.160Z,1510154366.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:26.561Z,1510154366.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:26.578Z,1510154366.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:26.942Z,1510154366.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:26.970Z,1510154366.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:27.611Z,1510154367.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:27.627Z,1510154367.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:27.729Z,1510154367.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:27.746Z,1510154367.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:28.146Z,1510154368.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:28.175Z,1510154368.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:28.549Z,1510154368.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:28.577Z,1510154368.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:28.950Z,1510154368.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:28.980Z,1510154368.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:29.335Z,1510154369.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:29.351Z,1510154369.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:29.735Z,1510154369.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:29.755Z,1510154369.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:30.140Z,1510154370.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:30.157Z,1510154370.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:30.561Z,1510154370.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:30.612Z,1510154370.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:30.937Z,1510154370.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:30.953Z,1510154370.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:31.345Z,1510154371.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:31.411Z,1510154371.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:32.028Z,1510154372.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:32.044Z,1510154372.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:32.161Z,1510154372.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:32.200Z,1510154372.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:32.589Z,1510154372.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:32.651Z,1510154372.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:32.989Z,1510154372.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:33.006Z,1510154373.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:33.373Z,1510154373.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:33.441Z,1510154373.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:33.767Z,1510154373.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:33.805Z,1510154373.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:34.164Z,1510154374.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:34.193Z,1510154374.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:34.592Z,1510154374.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:34.609Z,1510154374.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:34.982Z,1510154374.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:35.015Z,1510154375.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:35.656Z,1510154375.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:35.672Z,1510154375.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:35.773Z,1510154375.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:35.815Z,1510154375.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:36.201Z,1510154376.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:36.217Z,1510154376.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:36.595Z,1510154376.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:36.612Z,1510154376.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:36.992Z,1510154376.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:37.009Z,1510154377.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:37.380Z,1510154377.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:37.406Z,1510154377.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:37.783Z,1510154377.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:37.809Z,1510154377.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:38.180Z,1510154378.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:38.206Z,1510154378.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:38.607Z,1510154378.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:38.628Z,1510154378.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:38.980Z,1510154378.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:39.016Z,1510154379.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:39.393Z,1510154379.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:39.430Z,1510154379.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:40.073Z,1510154380.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:40.089Z,1510154380.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:40.189Z,1510154380.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:40.235Z,1510154380.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:40.616Z,1510154380.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:40.632Z,1510154380.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:41.016Z,1510154381.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:41.032Z,1510154381.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:41.416Z,1510154381.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:41.475Z,1510154381.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:41.799Z,1510154381.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:41.825Z,1510154381.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:42.197Z,1510154382.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:42.226Z,1510154382.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:42.627Z,1510154382.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:42.647Z,1510154382.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:43.020Z,1510154383.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:43.036Z,1510154383.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:43.674Z,1510154383.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:43.690Z,1510154383.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:43.790Z,1510154383.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:43.835Z,1510154383.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:44.224Z,1510154384.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:44.249Z,1510154384.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:44.620Z,1510154384.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:44.636Z,1510154384.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:45.010Z,1510154385.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:45.031Z,1510154385.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:45.399Z,1510154385.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:45.424Z,1510154385.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:45.799Z,1510154385.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:45.825Z,1510154385.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:46.200Z,1510154386.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:46.225Z,1510154386.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:46.627Z,1510154386.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:46.647Z,1510154386.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:46.999Z,1510154386.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:47.025Z,1510154387.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:47.420Z,1510154387.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:47.436Z,1510154387.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:48.082Z,1510154388.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:48.100Z,1510154388.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:48.236Z,1510154388.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:48.279Z,1510154388.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:48.650Z,1510154388.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:48.674Z,1510154388.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:49.041Z,1510154389.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:49.072Z,1510154389.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:49.449Z,1510154389.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:49.479Z,1510154389.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:49.834Z,1510154389.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:49.862Z,1510154389.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:50.243Z,1510154390.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:50.273Z,1510154390.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:50.660Z,1510154390.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:50.677Z,1510154390.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:51.049Z,1510154391.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:51.073Z,1510154391.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:51.716Z,1510154391.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:51.733Z,1510154391.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:51.840Z,1510154391.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:51.875Z,1510154391.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:52.254Z,1510154392.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:52.323Z,1510154392.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:52.653Z,1510154392.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:52.677Z,1510154392.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:53.052Z,1510154393.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:53.078Z,1510154393.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:53.439Z,1510154393.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:53.484Z,1510154393.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:53.839Z,1510154393.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:53.855Z,1510154393.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:54.240Z,1510154394.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:54.256Z,1510154394.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:54.670Z,1510154394.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:54.729Z,1510154394.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:55.043Z,1510154395.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:55.058Z,1510154395.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:55.457Z,1510154395.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:55.511Z,1510154395.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:56.131Z,1510154396.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:56.146Z,1510154396.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:56.253Z,1510154396.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:56.286Z,1510154396.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:56.680Z,1510154396.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:56.700Z,1510154396.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:57.075Z,1510154397.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:57.092Z,1510154397.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:57.471Z,1510154397.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:57.487Z,1510154397.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:57.859Z,1510154397.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:57.896Z,1510154397.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:58.260Z,1510154398.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:58.303Z,1510154398.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:58.688Z,1510154398.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:58.705Z,1510154398.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:59.073Z,1510154399.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:59.108Z,1510154399.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:59.747Z,1510154399.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:59.763Z,1510154399.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:19:59.865Z,1510154399.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:19:59.911Z,1510154399.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:00.291Z,1510154400.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:00.312Z,1510154400.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:00.692Z,1510154400.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:00.716Z,1510154400.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:01.077Z,1510154401.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:01.109Z,1510154401.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:01.471Z,1510154401.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:01.504Z,1510154401.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:01.871Z,1510154401.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:01.908Z,1510154401.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:02.272Z,1510154402.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:02.288Z,1510154402.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:02.703Z,1510154402.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:02.723Z,1510154402.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:03.071Z,1510154403.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:03.092Z,1510154403.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:03.485Z,1510154403.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:03.517Z,1510154403.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:04.163Z,1510154404.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:04.220Z,1510154404.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:04.333Z,1510154404.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:04.379Z,1510154404.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:04.756Z,1510154404.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:04.772Z,1510154404.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:05.160Z,1510154405.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:05.176Z,1510154405.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:05.556Z,1510154405.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:05.572Z,1510154405.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:05.939Z,1510154405.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:05.970Z,1510154405.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:06.340Z,1510154406.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:06.375Z,1510154406.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:06.767Z,1510154406.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:06.784Z,1510154406.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:07.159Z,1510154407.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:07.183Z,1510154407.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:07.820Z,1510154407.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:07.836Z,1510154407.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:07.937Z,1510154407.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:07.979Z,1510154407.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:08.359Z,1510154408.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:08.379Z,1510154408.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:08.764Z,1510154408.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:08.787Z,1510154408.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:09.156Z,1510154409.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:09.172Z,1510154409.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:09.539Z,1510154409.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:09.559Z,1510154409.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:09.944Z,1510154409.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:09.960Z,1510154409.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:10.343Z,1510154410.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:10.363Z,1510154410.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:10.776Z,1510154410.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:10.792Z,1510154410.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:11.144Z,1510154411.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:11.160Z,1510154411.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:11.557Z,1510154411.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:11.590Z,1510154411.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:12.238Z,1510154412.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:12.260Z,1510154412.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:12.395Z,1510154412.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:12.435Z,1510154412.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:12.798Z,1510154412.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:12.814Z,1510154412.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:13.193Z,1510154413.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:13.211Z,1510154413.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:13.598Z,1510154413.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:13.614Z,1510154413.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:13.989Z,1510154413.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:14.006Z,1510154414.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:14.389Z,1510154414.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:14.405Z,1510154414.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:14.814Z,1510154414.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:14.838Z,1510154414.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:15.198Z,1510154415.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:15.220Z,1510154415.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:15.902Z,1510154415.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:15.970Z,1510154415.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:16.101Z,1510154416.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:16.159Z,1510154416.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:16.502Z,1510154416.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:16.524Z,1510154416.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:16.902Z,1510154416.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:16.918Z,1510154416.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:17.303Z,1510154417.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:17.351Z,1510154417.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:17.694Z,1510154417.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:17.714Z,1510154417.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:18.091Z,1510154418.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:18.144Z,1510154418.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:18.518Z,1510154418.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:18.546Z,1510154418.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:18.893Z,1510154418.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:18.909Z,1510154418.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:19.288Z,1510154419.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:19.318Z,1510154419.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:19.703Z,1510154419.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:19.719Z,1510154419.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:20.377Z,1510154420.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:20.398Z,1510154420.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:20.518Z,1510154420.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:20.558Z,1510154420.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:20.930Z,1510154420.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:20.963Z,1510154420.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:21.325Z,1510154421.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:21.352Z,1510154421.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:21.725Z,1510154421.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:21.754Z,1510154421.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:22.116Z,1510154422.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:22.132Z,1510154422.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:22.511Z,1510154422.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:22.531Z,1510154422.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:22.914Z,1510154422.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:22.930Z,1510154422.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:23.317Z,1510154423.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:23.349Z,1510154423.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:23.738Z,1510154423.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:23.762Z,1510154423.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:24.129Z,1510154424.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:24.161Z,1510154424.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:24.808Z,1510154424.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:24.824Z,1510154424.824 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:24.824Z,1510154424.824 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2017-11-08T15:20:24.824Z,1510154424.824 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T15:20:24.826Z,1510154424.826 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:24.826Z,1510154424.826 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39
2017-11-08T15:20:24.826Z,1510154424.826 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T15:20:24.828Z,1510154424.828 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:24.828Z,1510154424.828 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 39
2017-11-08T15:20:24.828Z,1510154424.828 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T15:20:24.909Z,1510154424.909 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T15:20:24.909Z,1510154424.909 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T15:20:24.909Z,1510154424.909 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T15:20:24.954Z,1510154424.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:25.061Z,1510154425.061 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T15:20:25.061Z,1510154425.061 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2017-11-08T15:20:25.061Z,1510154425.061 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T15:20:25.061Z,1510154425.061 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39
2017-11-08T15:20:25.062Z,1510154425.062 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T15:20:25.062Z,1510154425.062 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 39
2017-11-08T15:20:25.354Z,1510154425.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:25.385Z,1510154425.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T15:20:25.385Z,1510154425.385 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:20:25.385Z,1510154425.385 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:20:25.386Z,1510154425.386 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T15:20:25.386Z,1510154425.386 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:20:25.387Z,1510154425.387 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:20:25.387Z,1510154425.387 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T15:20:25.387Z,1510154425.387 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:20:25.388Z,1510154425.388 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:20:25.753Z,1510154425.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:25.769Z,1510154425.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-08T15:20:25.770Z,1510154425.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:26.147Z,1510154426.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:26.209Z,1510154426.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2017-11-08T15:20:26.210Z,1510154426.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:26.544Z,1510154426.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:26.560Z,1510154426.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2017-11-08T15:20:26.561Z,1510154426.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:26.945Z,1510154426.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:26.961Z,1510154426.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2017-11-08T15:20:26.962Z,1510154426.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:27.341Z,1510154427.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:27.360Z,1510154427.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2017-11-08T15:20:27.361Z,1510154427.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:27.762Z,1510154427.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:27.794Z,1510154427.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2017-11-08T15:20:27.795Z,1510154427.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:28.147Z,1510154428.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:28.167Z,1510154428.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2017-11-08T15:20:28.168Z,1510154428.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:28.554Z,1510154428.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:28.570Z,1510154428.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2017-11-08T15:20:28.571Z,1510154428.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:29.222Z,1510154429.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:29.251Z,1510154429.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T15:20:29.252Z,1510154429.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:29.363Z,1510154429.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:29.380Z,1510154429.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2017-11-08T15:20:29.397Z,1510154429.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:29.774Z,1510154429.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:29.806Z,1510154429.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2017-11-08T15:20:29.806Z,1510154429.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:30.177Z,1510154430.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:30.211Z,1510154430.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2017-11-08T15:20:30.212Z,1510154430.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:30.578Z,1510154430.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:30.604Z,1510154430.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2017-11-08T15:20:30.605Z,1510154430.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:30.964Z,1510154430.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:30.980Z,1510154430.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-11-08T15:20:30.981Z,1510154430.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:31.363Z,1510154431.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:31.423Z,1510154431.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-08T15:20:31.424Z,1510154431.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:31.799Z,1510154431.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:31.815Z,1510154431.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2017-11-08T15:20:31.817Z,1510154431.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:32.182Z,1510154432.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:32.223Z,1510154432.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2017-11-08T15:20:32.224Z,1510154432.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:32.838Z,1510154432.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:32.862Z,1510154432.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T15:20:32.864Z,1510154432.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:32.980Z,1510154432.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:33.012Z,1510154433.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2017-11-08T15:20:33.017Z,1510154433.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:33.405Z,1510154433.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:33.421Z,1510154433.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2017-11-08T15:20:33.422Z,1510154433.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:33.789Z,1510154433.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:33.822Z,1510154433.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2017-11-08T15:20:33.823Z,1510154433.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:34.194Z,1510154434.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:34.221Z,1510154434.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2017-11-08T15:20:34.222Z,1510154434.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:34.580Z,1510154434.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:34.618Z,1510154434.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2017-11-08T15:20:34.619Z,1510154434.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:34.980Z,1510154434.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:34.995Z,1510154434.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2017-11-08T15:20:35.022Z,1510154435.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:35.382Z,1510154435.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:35.418Z,1510154435.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2017-11-08T15:20:35.419Z,1510154435.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:35.813Z,1510154435.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:35.828Z,1510154435.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2017-11-08T15:20:35.829Z,1510154435.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:36.179Z,1510154436.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:36.196Z,1510154436.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2017-11-08T15:20:36.197Z,1510154436.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:36.598Z,1510154436.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:36.625Z,1510154436.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2017-11-08T15:20:36.626Z,1510154436.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:37.276Z,1510154437.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:37.292Z,1510154437.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T15:20:37.294Z,1510154437.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:37.393Z,1510154437.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:37.434Z,1510154437.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2017-11-08T15:20:37.435Z,1510154437.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:37.826Z,1510154437.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:37.842Z,1510154437.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2017-11-08T15:20:37.843Z,1510154437.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:38.220Z,1510154438.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:38.286Z,1510154438.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2017-11-08T15:20:38.287Z,1510154438.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:38.614Z,1510154438.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:38.645Z,1510154438.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2017-11-08T15:20:38.646Z,1510154438.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:39.002Z,1510154439.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:39.048Z,1510154439.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2017-11-08T15:20:39.049Z,1510154439.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:39.399Z,1510154439.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:39.415Z,1510154439.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2017-11-08T15:20:39.416Z,1510154439.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:39.822Z,1510154439.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:39.888Z,1510154439.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2017-11-08T15:20:39.889Z,1510154439.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:40.213Z,1510154440.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:40.245Z,1510154440.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2017-11-08T15:20:40.246Z,1510154440.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:40.888Z,1510154440.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:40.903Z,1510154440.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T15:20:40.904Z,1510154440.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:41.013Z,1510154441.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:41.054Z,1510154441.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-08T15:20:41.055Z,1510154441.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:41.441Z,1510154441.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:41.457Z,1510154441.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-08T15:20:41.458Z,1510154441.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:41.835Z,1510154441.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:41.852Z,1510154441.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-11-08T15:20:41.853Z,1510154441.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:42.232Z,1510154442.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:42.249Z,1510154442.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-08T15:20:42.250Z,1510154442.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:42.620Z,1510154442.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:42.648Z,1510154442.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-08T15:20:42.653Z,1510154442.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:43.016Z,1510154443.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:43.040Z,1510154443.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-08T15:20:43.045Z,1510154443.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:43.420Z,1510154443.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:43.455Z,1510154443.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-08T15:20:43.456Z,1510154443.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:43.852Z,1510154443.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:43.869Z,1510154443.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-08T15:20:43.870Z,1510154443.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:44.219Z,1510154444.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:44.255Z,1510154444.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-08T15:20:44.256Z,1510154444.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:44.633Z,1510154444.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:44.660Z,1510154444.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-08T15:20:44.661Z,1510154444.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:45.465Z,1510154445.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:45.482Z,1510154445.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:45.616Z,1510154445.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:45.656Z,1510154445.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:46.030Z,1510154446.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:46.066Z,1510154446.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:46.433Z,1510154446.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:46.461Z,1510154446.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:46.826Z,1510154446.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:46.858Z,1510154446.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:47.219Z,1510154447.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:47.239Z,1510154447.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:47.618Z,1510154447.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:47.634Z,1510154447.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:48.017Z,1510154448.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:48.067Z,1510154448.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:48.419Z,1510154448.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:48.439Z,1510154448.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:48.837Z,1510154448.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:48.863Z,1510154448.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:49.229Z,1510154449.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:49.268Z,1510154449.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:49.911Z,1510154449.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:49.929Z,1510154449.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:50.035Z,1510154450.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:50.068Z,1510154450.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:50.452Z,1510154450.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:50.472Z,1510154450.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:50.841Z,1510154450.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:50.869Z,1510154450.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:51.253Z,1510154451.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:51.290Z,1510154451.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:51.631Z,1510154451.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:51.664Z,1510154451.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:52.027Z,1510154452.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:52.047Z,1510154452.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:52.428Z,1510154452.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:52.445Z,1510154452.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:52.863Z,1510154452.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:52.881Z,1510154452.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:53.231Z,1510154453.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:53.247Z,1510154453.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:53.649Z,1510154453.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:53.681Z,1510154453.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:54.323Z,1510154454.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:54.339Z,1510154454.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:54.437Z,1510154454.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:54.491Z,1510154454.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:54.868Z,1510154454.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:54.892Z,1510154454.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:55.267Z,1510154455.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:55.287Z,1510154455.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:55.655Z,1510154455.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:55.682Z,1510154455.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:56.048Z,1510154456.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:56.075Z,1510154456.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:56.444Z,1510154456.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:56.484Z,1510154456.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:56.874Z,1510154456.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:56.891Z,1510154456.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:57.270Z,1510154457.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:57.287Z,1510154457.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:57.934Z,1510154457.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:57.950Z,1510154457.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:58.093Z,1510154458.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:58.125Z,1510154458.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:58.511Z,1510154458.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:58.528Z,1510154458.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:58.898Z,1510154458.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:58.922Z,1510154458.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:59.299Z,1510154459.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:59.323Z,1510154459.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:20:59.689Z,1510154459.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:20:59.762Z,1510154459.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:00.088Z,1510154460.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:00.104Z,1510154460.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:00.514Z,1510154460.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:00.535Z,1510154460.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:00.889Z,1510154460.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:00.947Z,1510154460.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:01.284Z,1510154461.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:01.308Z,1510154461.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:01.701Z,1510154461.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:01.759Z,1510154461.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:02.413Z,1510154462.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:02.429Z,1510154462.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:02.541Z,1510154462.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:02.558Z,1510154462.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:02.958Z,1510154462.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:02.985Z,1510154462.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:03.361Z,1510154463.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:03.387Z,1510154463.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:03.758Z,1510154463.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:03.785Z,1510154463.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:04.147Z,1510154464.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:04.189Z,1510154464.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:04.547Z,1510154464.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:04.563Z,1510154464.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:04.943Z,1510154464.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:04.963Z,1510154464.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:05.348Z,1510154465.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:05.364Z,1510154465.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:05.781Z,1510154465.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:05.797Z,1510154465.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:06.157Z,1510154466.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:06.193Z,1510154466.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:06.836Z,1510154466.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:06.861Z,1510154466.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:06.972Z,1510154466.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:07.003Z,1510154467.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:07.390Z,1510154467.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:07.410Z,1510154467.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:07.788Z,1510154467.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:07.811Z,1510154467.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:08.192Z,1510154468.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:08.208Z,1510154468.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:08.572Z,1510154468.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:08.606Z,1510154468.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:08.967Z,1510154468.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:08.993Z,1510154468.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:09.381Z,1510154469.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:09.397Z,1510154469.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:09.798Z,1510154469.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:09.843Z,1510154469.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:10.171Z,1510154470.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:10.196Z,1510154470.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:10.593Z,1510154470.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:10.615Z,1510154470.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:11.263Z,1510154471.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:11.290Z,1510154471.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:11.405Z,1510154471.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:11.450Z,1510154471.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:11.833Z,1510154471.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:11.849Z,1510154471.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:12.235Z,1510154472.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:12.254Z,1510154472.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:12.618Z,1510154472.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:12.646Z,1510154472.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:13.011Z,1510154473.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:13.036Z,1510154473.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:13.407Z,1510154473.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:13.424Z,1510154473.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:13.836Z,1510154473.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:13.853Z,1510154473.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:14.225Z,1510154474.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:14.259Z,1510154474.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:14.899Z,1510154474.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:14.915Z,1510154474.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:15.012Z,1510154475.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:15.058Z,1510154475.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:15.438Z,1510154475.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:15.459Z,1510154475.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:15.834Z,1510154475.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:15.855Z,1510154475.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:16.236Z,1510154476.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:16.252Z,1510154476.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:16.620Z,1510154476.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:16.655Z,1510154476.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:17.019Z,1510154477.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:17.050Z,1510154477.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:17.417Z,1510154477.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:17.453Z,1510154477.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:17.852Z,1510154477.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:17.875Z,1510154477.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:18.220Z,1510154478.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:18.256Z,1510154478.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:18.630Z,1510154478.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:18.657Z,1510154478.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:19.310Z,1510154479.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:19.326Z,1510154479.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:19.458Z,1510154479.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:19.497Z,1510154479.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:19.862Z,1510154479.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:19.878Z,1510154479.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:20.262Z,1510154480.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:20.278Z,1510154480.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:20.659Z,1510154480.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:20.680Z,1510154480.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:21.054Z,1510154481.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:21.071Z,1510154481.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:21.455Z,1510154481.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:21.472Z,1510154481.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:21.870Z,1510154481.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:21.974Z,1510154481.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:22.263Z,1510154482.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:22.283Z,1510154482.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:22.962Z,1510154482.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:23.006Z,1510154483.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:23.118Z,1510154483.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:23.167Z,1510154483.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:23.534Z,1510154483.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:23.603Z,1510154483.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:23.933Z,1510154483.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:23.962Z,1510154483.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:24.334Z,1510154484.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:24.374Z,1510154484.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:24.720Z,1510154484.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:24.765Z,1510154484.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:25.125Z,1510154485.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:25.186Z,1510154485.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:25.550Z,1510154485.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:25.579Z,1510154485.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:25.927Z,1510154485.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:25.943Z,1510154485.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:26.327Z,1510154486.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:26.343Z,1510154486.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:26.734Z,1510154486.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:26.750Z,1510154486.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:27.420Z,1510154487.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:27.437Z,1510154487.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:27.548Z,1510154487.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:27.595Z,1510154487.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:27.968Z,1510154487.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:27.984Z,1510154487.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:28.363Z,1510154488.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:28.395Z,1510154488.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:28.769Z,1510154488.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:28.785Z,1510154488.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:29.152Z,1510154489.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:29.184Z,1510154489.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:29.544Z,1510154489.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:29.572Z,1510154489.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:29.949Z,1510154489.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:29.981Z,1510154489.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:30.349Z,1510154490.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:30.386Z,1510154490.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:30.772Z,1510154490.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:30.788Z,1510154490.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:31.162Z,1510154491.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:31.200Z,1510154491.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:31.838Z,1510154491.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:31.883Z,1510154491.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:31.997Z,1510154491.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:32.043Z,1510154492.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:32.423Z,1510154492.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:32.453Z,1510154492.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:32.824Z,1510154492.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:32.841Z,1510154492.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:33.210Z,1510154493.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:33.236Z,1510154493.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:33.601Z,1510154493.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:33.633Z,1510154493.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:34.004Z,1510154494.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:34.020Z,1510154494.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:34.401Z,1510154494.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:34.417Z,1510154494.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:34.846Z,1510154494.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:34.889Z,1510154494.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:35.200Z,1510154495.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:35.216Z,1510154495.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:35.614Z,1510154495.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:35.638Z,1510154495.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:36.297Z,1510154496.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:36.313Z,1510154496.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:36.414Z,1510154496.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:36.459Z,1510154496.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:36.834Z,1510154496.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:36.856Z,1510154496.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:37.241Z,1510154497.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:37.263Z,1510154497.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:37.626Z,1510154497.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:37.660Z,1510154497.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:38.023Z,1510154498.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:38.055Z,1510154498.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:38.420Z,1510154498.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:38.452Z,1510154498.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:38.850Z,1510154498.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:38.869Z,1510154498.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:39.241Z,1510154499.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:39.275Z,1510154499.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:39.950Z,1510154499.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:39.966Z,1510154499.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:40.068Z,1510154500.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:40.101Z,1510154500.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:40.496Z,1510154500.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:40.513Z,1510154500.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:40.896Z,1510154500.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:40.919Z,1510154500.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:41.290Z,1510154501.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:41.306Z,1510154501.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:41.674Z,1510154501.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:41.704Z,1510154501.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:42.077Z,1510154502.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:42.107Z,1510154502.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:42.503Z,1510154502.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:42.523Z,1510154502.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:42.874Z,1510154502.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:42.900Z,1510154502.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:43.273Z,1510154503.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:43.307Z,1510154503.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:43.693Z,1510154503.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:43.756Z,1510154503.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:44.358Z,1510154504.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:44.374Z,1510154504.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:44.509Z,1510154504.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:44.525Z,1510154504.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:44.914Z,1510154504.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:44.967Z,1510154504.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:45.315Z,1510154505.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:45.331Z,1510154505.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:45.715Z,1510154505.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:45.767Z,1510154505.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:46.100Z,1510154506.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:46.126Z,1510154506.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:46.523Z,1510154506.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:46.539Z,1510154506.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:46.915Z,1510154506.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:46.936Z,1510154506.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:47.590Z,1510154507.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:47.619Z,1510154507.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:47.733Z,1510154507.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:47.758Z,1510154507.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:48.158Z,1510154508.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:48.182Z,1510154508.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:48.550Z,1510154508.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:48.583Z,1510154508.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:48.945Z,1510154508.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:48.978Z,1510154508.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:49.340Z,1510154509.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:49.365Z,1510154509.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:49.739Z,1510154509.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:49.756Z,1510154509.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:50.140Z,1510154510.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:50.157Z,1510154510.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:50.566Z,1510154510.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:50.595Z,1510154510.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:50.942Z,1510154510.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:50.958Z,1510154510.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:51.349Z,1510154511.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:51.365Z,1510154511.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:52.029Z,1510154512.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:52.045Z,1510154512.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:52.165Z,1510154512.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:52.209Z,1510154512.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:52.588Z,1510154512.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:52.605Z,1510154512.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:52.991Z,1510154512.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:53.015Z,1510154513.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:53.388Z,1510154513.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:53.405Z,1510154513.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:53.778Z,1510154513.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:53.840Z,1510154513.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:54.179Z,1510154514.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:54.196Z,1510154514.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:54.594Z,1510154514.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:54.611Z,1510154514.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:54.991Z,1510154514.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:55.008Z,1510154515.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:55.650Z,1510154515.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:55.666Z,1510154515.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:55.797Z,1510154515.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:55.813Z,1510154515.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:56.214Z,1510154516.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:56.241Z,1510154516.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:56.613Z,1510154516.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:56.645Z,1510154516.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:57.010Z,1510154517.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:57.042Z,1510154517.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:57.403Z,1510154517.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:57.444Z,1510154517.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:57.803Z,1510154517.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:57.820Z,1510154517.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:58.208Z,1510154518.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:58.224Z,1510154518.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:58.634Z,1510154518.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:58.697Z,1510154518.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:59.012Z,1510154519.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:59.028Z,1510154519.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:21:59.417Z,1510154519.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:21:59.448Z,1510154519.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:00.333Z,1510154520.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:00.349Z,1510154520.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:00.483Z,1510154520.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:00.500Z,1510154520.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:00.903Z,1510154520.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:00.929Z,1510154520.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:01.302Z,1510154521.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:01.336Z,1510154521.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:01.699Z,1510154521.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:01.725Z,1510154521.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:02.091Z,1510154522.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:02.124Z,1510154522.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:02.521Z,1510154522.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:02.538Z,1510154522.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:02.901Z,1510154522.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:02.936Z,1510154522.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:03.728Z,1510154523.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:03.752Z,1510154523.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:03.887Z,1510154523.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:03.931Z,1510154523.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:04.294Z,1510154524.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:04.326Z,1510154524.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:04.693Z,1510154524.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:04.735Z,1510154524.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:05.094Z,1510154525.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:05.110Z,1510154525.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:05.482Z,1510154525.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:05.558Z,1510154525.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:05.884Z,1510154525.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:05.941Z,1510154525.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:06.287Z,1510154526.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:06.307Z,1510154526.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:06.705Z,1510154526.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:06.730Z,1510154526.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:07.094Z,1510154527.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:07.146Z,1510154527.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:07.762Z,1510154527.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:07.791Z,1510154527.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:07.907Z,1510154527.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:07.985Z,1510154527.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:08.310Z,1510154528.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:08.342Z,1510154528.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:08.720Z,1510154528.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:08.736Z,1510154528.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:09.113Z,1510154529.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:09.136Z,1510154529.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:09.495Z,1510154529.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:09.530Z,1510154529.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:09.900Z,1510154529.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:09.932Z,1510154529.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:10.300Z,1510154530.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:10.338Z,1510154530.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:10.724Z,1510154530.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:10.740Z,1510154530.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:11.113Z,1510154531.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:11.147Z,1510154531.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:11.789Z,1510154531.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:11.806Z,1510154531.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:11.912Z,1510154531.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:11.955Z,1510154531.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:12.340Z,1510154532.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:12.356Z,1510154532.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:12.735Z,1510154532.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:12.751Z,1510154532.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:13.131Z,1510154533.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:13.148Z,1510154533.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:13.526Z,1510154533.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:13.550Z,1510154533.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:13.915Z,1510154533.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:13.946Z,1510154533.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:14.319Z,1510154534.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:14.345Z,1510154534.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:14.746Z,1510154534.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:14.762Z,1510154534.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:15.115Z,1510154535.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:15.149Z,1510154535.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:15.536Z,1510154535.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:15.552Z,1510154535.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:16.209Z,1510154536.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:16.250Z,1510154536.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:16.359Z,1510154536.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:16.399Z,1510154536.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:16.780Z,1510154536.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:16.796Z,1510154536.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:17.169Z,1510154537.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:17.203Z,1510154537.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:17.570Z,1510154537.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:17.599Z,1510154537.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:17.959Z,1510154537.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:17.993Z,1510154537.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:18.360Z,1510154538.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:18.395Z,1510154538.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:18.788Z,1510154538.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:18.804Z,1510154538.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:19.189Z,1510154539.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:19.213Z,1510154539.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:19.846Z,1510154539.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:19.861Z,1510154539.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:19.980Z,1510154539.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:20.031Z,1510154540.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:20.394Z,1510154540.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:20.415Z,1510154540.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:20.798Z,1510154540.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:20.814Z,1510154540.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:21.198Z,1510154541.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:21.214Z,1510154541.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:21.587Z,1510154541.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:21.618Z,1510154541.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:21.991Z,1510154541.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:22.007Z,1510154542.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:22.392Z,1510154542.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:22.408Z,1510154542.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:22.806Z,1510154542.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:22.834Z,1510154542.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:23.191Z,1510154543.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:23.207Z,1510154543.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:23.598Z,1510154543.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:23.614Z,1510154543.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:24.269Z,1510154544.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:24.290Z,1510154544.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:24.412Z,1510154544.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:24.444Z,1510154544.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:24.832Z,1510154544.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:24.848Z,1510154544.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:25.230Z,1510154545.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:25.267Z,1510154545.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:25.633Z,1510154545.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:25.650Z,1510154545.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:26.012Z,1510154546.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:26.046Z,1510154546.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:26.411Z,1510154546.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:26.444Z,1510154546.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:26.844Z,1510154546.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:26.864Z,1510154546.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:27.227Z,1510154547.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:27.256Z,1510154547.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:27.898Z,1510154547.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:27.962Z,1510154547.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:28.090Z,1510154548.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:28.155Z,1510154548.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:28.495Z,1510154548.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:28.512Z,1510154548.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:28.895Z,1510154548.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:28.944Z,1510154548.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:29.298Z,1510154549.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:29.314Z,1510154549.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:29.687Z,1510154549.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:29.745Z,1510154549.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:30.076Z,1510154550.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:30.105Z,1510154550.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:30.502Z,1510154550.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:30.519Z,1510154550.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:30.884Z,1510154550.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:30.901Z,1510154550.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:31.273Z,1510154551.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:31.303Z,1510154551.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:31.709Z,1510154551.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:31.747Z,1510154551.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:32.370Z,1510154552.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:32.398Z,1510154552.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:32.509Z,1510154552.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:32.525Z,1510154552.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:32.930Z,1510154552.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:32.963Z,1510154552.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:33.340Z,1510154553.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:33.357Z,1510154553.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:33.721Z,1510154553.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:33.754Z,1510154553.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:34.116Z,1510154554.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:34.136Z,1510154554.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:34.516Z,1510154554.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:34.532Z,1510154554.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:34.915Z,1510154554.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:34.932Z,1510154554.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:35.321Z,1510154555.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:35.337Z,1510154555.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:35.738Z,1510154555.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:35.762Z,1510154555.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:36.130Z,1510154556.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:36.158Z,1510154556.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:36.803Z,1510154556.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:36.819Z,1510154556.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:36.929Z,1510154556.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:36.946Z,1510154556.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:37.346Z,1510154557.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:37.376Z,1510154557.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:37.750Z,1510154557.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:37.815Z,1510154557.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:38.150Z,1510154558.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:38.183Z,1510154558.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:38.535Z,1510154558.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:38.552Z,1510154558.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:38.936Z,1510154558.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:38.953Z,1510154558.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:39.337Z,1510154559.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:39.354Z,1510154559.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:39.768Z,1510154559.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:39.791Z,1510154559.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:40.140Z,1510154560.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:40.156Z,1510154560.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:40.546Z,1510154560.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:40.562Z,1510154560.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:41.228Z,1510154561.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:41.244Z,1510154561.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:41.363Z,1510154561.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:41.397Z,1510154561.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:41.786Z,1510154561.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:41.802Z,1510154561.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:42.181Z,1510154562.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:42.203Z,1510154562.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:42.585Z,1510154562.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:42.607Z,1510154562.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:42.960Z,1510154562.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:42.986Z,1510154562.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:43.374Z,1510154563.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:43.390Z,1510154563.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:43.787Z,1510154563.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:43.808Z,1510154563.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:44.185Z,1510154564.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:44.201Z,1510154564.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:44.842Z,1510154564.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:44.858Z,1510154564.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:44.000Z,1510154565.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:45.016Z,1510154565.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:45.406Z,1510154565.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:45.434Z,1510154565.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:45.813Z,1510154565.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:45.844Z,1510154565.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:46.206Z,1510154566.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:46.222Z,1510154566.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:46.597Z,1510154566.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:46.614Z,1510154566.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:46.997Z,1510154566.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:47.013Z,1510154567.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:47.399Z,1510154567.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:47.415Z,1510154567.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:47.814Z,1510154567.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:47.844Z,1510154567.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:48.197Z,1510154568.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:48.214Z,1510154568.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:48.293Z,1510154568.293 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T15:22:48.610Z,1510154568.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:48.618Z,1510154568.618 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T15:22:48.618Z,1510154568.618 [BPC1] Data Fault, FailCount= 1
2017-11-08T15:22:48.619Z,1510154568.619 [BPC1](ERROR): Data Fault
2017-11-08T15:22:48.660Z,1510154568.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:48.745Z,1510154568.745 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T15:22:49.322Z,1510154569.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:49.355Z,1510154569.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:49.473Z,1510154569.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:49.515Z,1510154569.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:49.901Z,1510154569.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:49.917Z,1510154569.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:49.997Z,1510154569.997 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T15:22:49.997Z,1510154569.997 [BPC1] No Fault, FailCount= 1
2017-11-08T15:22:50.294Z,1510154570.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:50.367Z,1510154570.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:50.692Z,1510154570.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:50.708Z,1510154570.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:51.081Z,1510154571.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:51.114Z,1510154571.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:51.506Z,1510154571.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:51.532Z,1510154571.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:51.900Z,1510154571.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:51.917Z,1510154571.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:52.570Z,1510154572.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:52.586Z,1510154572.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:52.720Z,1510154572.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:52.763Z,1510154572.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:53.138Z,1510154573.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:53.167Z,1510154573.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:53.538Z,1510154573.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:53.565Z,1510154573.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:53.938Z,1510154573.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:53.964Z,1510154573.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:54.323Z,1510154574.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:54.339Z,1510154574.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:54.720Z,1510154574.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:54.737Z,1510154574.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:55.120Z,1510154575.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:55.137Z,1510154575.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:55.553Z,1510154575.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:55.569Z,1510154575.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:55.938Z,1510154575.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:55.964Z,1510154575.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:56.613Z,1510154576.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:56.630Z,1510154576.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:56.735Z,1510154576.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:56.771Z,1510154576.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:57.157Z,1510154577.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:57.173Z,1510154577.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:57.550Z,1510154577.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:57.571Z,1510154577.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:57.950Z,1510154577.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:57.976Z,1510154577.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:58.336Z,1510154578.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:58.368Z,1510154578.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:58.735Z,1510154578.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:58.791Z,1510154578.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:59.139Z,1510154579.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:59.175Z,1510154579.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:59.570Z,1510154579.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:59.586Z,1510154579.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:22:59.946Z,1510154579.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:22:59.972Z,1510154579.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:00.625Z,1510154580.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:00.641Z,1510154580.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:00.770Z,1510154580.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:00.811Z,1510154580.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:01.182Z,1510154581.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:01.223Z,1510154581.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:01.581Z,1510154581.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:01.597Z,1510154581.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:01.978Z,1510154581.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:01.994Z,1510154581.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:02.372Z,1510154582.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:02.392Z,1510154582.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:02.772Z,1510154582.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:02.788Z,1510154582.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:03.174Z,1510154583.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:03.191Z,1510154583.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:03.594Z,1510154583.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:03.617Z,1510154583.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:03.972Z,1510154583.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:03.995Z,1510154583.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:04.382Z,1510154584.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:04.398Z,1510154584.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:05.064Z,1510154585.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:05.087Z,1510154585.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:05.193Z,1510154585.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:05.228Z,1510154585.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:05.614Z,1510154585.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:05.643Z,1510154585.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:06.019Z,1510154586.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:06.036Z,1510154586.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:06.417Z,1510154586.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:06.434Z,1510154586.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:06.799Z,1510154586.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:06.832Z,1510154586.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:07.199Z,1510154587.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:07.225Z,1510154587.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:07.627Z,1510154587.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:07.651Z,1510154587.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:08.020Z,1510154588.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:08.037Z,1510154588.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:08.698Z,1510154588.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:08.719Z,1510154588.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:08.833Z,1510154588.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:08.886Z,1510154588.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:09.254Z,1510154589.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:09.284Z,1510154589.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:09.650Z,1510154589.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:09.684Z,1510154589.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:10.052Z,1510154590.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:10.079Z,1510154590.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:10.442Z,1510154590.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:10.488Z,1510154590.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:10.838Z,1510154590.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:10.908Z,1510154590.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:11.240Z,1510154591.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:11.258Z,1510154591.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:11.664Z,1510154591.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:11.731Z,1510154591.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:12.053Z,1510154592.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:12.090Z,1510154592.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:12.727Z,1510154592.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:12.787Z,1510154592.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:12.903Z,1510154592.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:12.936Z,1510154592.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:13.318Z,1510154593.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:13.351Z,1510154593.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:13.717Z,1510154593.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:13.744Z,1510154593.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:14.129Z,1510154594.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:14.152Z,1510154594.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:14.500Z,1510154594.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:14.543Z,1510154594.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:14.904Z,1510154594.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:14.920Z,1510154594.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:15.306Z,1510154595.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:15.322Z,1510154595.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:15.735Z,1510154595.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:15.755Z,1510154595.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:16.114Z,1510154596.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:16.138Z,1510154596.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:16.795Z,1510154596.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:16.811Z,1510154596.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:16.921Z,1510154596.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:16.957Z,1510154596.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:17.342Z,1510154597.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:17.365Z,1510154597.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:17.745Z,1510154597.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:17.762Z,1510154597.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:18.142Z,1510154598.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:18.164Z,1510154598.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:18.527Z,1510154598.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:18.560Z,1510154598.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:18.927Z,1510154598.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:18.963Z,1510154598.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:19.324Z,1510154599.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:19.360Z,1510154599.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:19.757Z,1510154599.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:19.773Z,1510154599.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:20.127Z,1510154600.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:20.143Z,1510154600.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:20.538Z,1510154600.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:20.574Z,1510154600.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:21.215Z,1510154601.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:21.271Z,1510154601.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:21.383Z,1510154601.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:21.399Z,1510154601.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:21.802Z,1510154601.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:21.835Z,1510154601.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:22.197Z,1510154602.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:22.232Z,1510154602.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:22.602Z,1510154602.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:22.629Z,1510154602.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:22.988Z,1510154602.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:23.021Z,1510154603.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:23.384Z,1510154603.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:23.401Z,1510154603.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:23.814Z,1510154603.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:23.838Z,1510154603.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:24.202Z,1510154604.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:24.229Z,1510154604.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:24.871Z,1510154604.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:24.891Z,1510154604.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:24.989Z,1510154604.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:25.006Z,1510154605.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:25.410Z,1510154605.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:25.444Z,1510154605.444 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:25.444Z,1510154605.444 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2017-11-08T15:23:25.444Z,1510154605.444 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T15:23:25.446Z,1510154605.446 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:25.446Z,1510154605.446 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40
2017-11-08T15:23:25.446Z,1510154605.446 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T15:23:25.448Z,1510154605.448 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:25.448Z,1510154605.448 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 40
2017-11-08T15:23:25.448Z,1510154605.448 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T15:23:25.521Z,1510154605.521 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T15:23:25.521Z,1510154605.521 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T15:23:25.522Z,1510154605.522 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T15:23:25.809Z,1510154605.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:25.933Z,1510154605.933 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T15:23:25.933Z,1510154605.933 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2017-11-08T15:23:25.933Z,1510154605.933 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T15:23:25.933Z,1510154605.933 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40
2017-11-08T15:23:25.934Z,1510154605.934 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T15:23:25.934Z,1510154605.934 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 40
2017-11-08T15:23:26.209Z,1510154606.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:26.243Z,1510154606.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T15:23:26.244Z,1510154606.244 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:23:26.244Z,1510154606.244 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:23:26.244Z,1510154606.244 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T15:23:26.245Z,1510154606.245 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:23:26.245Z,1510154606.245 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:23:26.246Z,1510154606.246 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T15:23:26.246Z,1510154606.246 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:23:26.246Z,1510154606.246 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:23:26.603Z,1510154606.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:26.630Z,1510154606.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T15:23:26.631Z,1510154606.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:26.995Z,1510154606.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:27.027Z,1510154607.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T15:23:27.028Z,1510154607.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:27.396Z,1510154607.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:27.412Z,1510154607.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T15:23:27.413Z,1510154607.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:27.831Z,1510154607.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:27.851Z,1510154607.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T15:23:27.852Z,1510154607.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:28.199Z,1510154608.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:28.214Z,1510154608.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T15:23:28.215Z,1510154608.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:28.613Z,1510154608.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:28.646Z,1510154608.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T15:23:28.647Z,1510154608.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:29.314Z,1510154609.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:29.342Z,1510154609.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-11-08T15:23:29.343Z,1510154609.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:29.460Z,1510154609.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:29.499Z,1510154609.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-08T15:23:29.500Z,1510154609.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:29.881Z,1510154609.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:29.897Z,1510154609.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-08T15:23:29.898Z,1510154609.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:30.278Z,1510154610.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:30.299Z,1510154610.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-08T15:23:30.300Z,1510154610.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:30.666Z,1510154610.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:30.692Z,1510154610.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T15:23:30.693Z,1510154610.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:31.060Z,1510154611.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:31.097Z,1510154611.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T15:23:31.098Z,1510154611.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:31.489Z,1510154611.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:31.505Z,1510154611.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-08T15:23:31.506Z,1510154611.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:31.874Z,1510154611.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:31.907Z,1510154611.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-08T15:23:31.908Z,1510154611.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:32.550Z,1510154612.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:32.565Z,1510154612.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2017-11-08T15:23:32.566Z,1510154612.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:32.701Z,1510154612.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:32.742Z,1510154612.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-08T15:23:32.743Z,1510154612.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:33.099Z,1510154613.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:33.182Z,1510154613.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T15:23:33.183Z,1510154613.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:33.506Z,1510154613.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:33.522Z,1510154613.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T15:23:33.523Z,1510154613.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:33.903Z,1510154613.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:33.923Z,1510154613.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T15:23:33.924Z,1510154613.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:34.296Z,1510154614.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:34.354Z,1510154614.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T15:23:34.355Z,1510154614.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:34.694Z,1510154614.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:34.712Z,1510154614.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T15:23:34.713Z,1510154614.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:35.091Z,1510154615.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:35.143Z,1510154615.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T15:23:35.144Z,1510154615.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:35.514Z,1510154615.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:35.546Z,1510154615.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T15:23:35.547Z,1510154615.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:35.898Z,1510154615.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:35.913Z,1510154615.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T15:23:35.914Z,1510154615.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:36.307Z,1510154616.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:36.327Z,1510154616.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T15:23:36.328Z,1510154616.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:36.982Z,1510154616.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:37.003Z,1510154617.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T15:23:37.004Z,1510154617.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:37.121Z,1510154617.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:37.168Z,1510154617.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T15:23:37.169Z,1510154617.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:37.549Z,1510154617.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:37.565Z,1510154617.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T15:23:37.565Z,1510154617.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:37.949Z,1510154617.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:37.965Z,1510154617.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T15:23:37.965Z,1510154617.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:38.347Z,1510154618.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:38.368Z,1510154618.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T15:23:38.369Z,1510154618.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:38.727Z,1510154618.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:38.758Z,1510154618.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T15:23:38.759Z,1510154618.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:39.127Z,1510154619.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:39.159Z,1510154619.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T15:23:39.159Z,1510154619.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:39.560Z,1510154619.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:39.576Z,1510154619.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T15:23:39.577Z,1510154619.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:39.947Z,1510154619.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:39.964Z,1510154619.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T15:23:39.965Z,1510154619.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:40.648Z,1510154620.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:40.663Z,1510154620.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T15:23:40.664Z,1510154620.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:40.775Z,1510154620.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:40.801Z,1510154620.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2017-11-08T15:23:40.802Z,1510154620.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:41.192Z,1510154621.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:41.215Z,1510154621.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-08T15:23:41.216Z,1510154621.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:41.593Z,1510154621.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:41.615Z,1510154621.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-08T15:23:41.616Z,1510154621.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:41.982Z,1510154621.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:42.016Z,1510154622.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-08T15:23:42.017Z,1510154622.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:42.368Z,1510154622.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:42.384Z,1510154622.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T15:23:42.401Z,1510154622.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:42.771Z,1510154622.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:42.787Z,1510154622.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T15:23:42.788Z,1510154622.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:43.172Z,1510154623.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:43.223Z,1510154623.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-08T15:23:43.224Z,1510154623.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:43.604Z,1510154623.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:43.620Z,1510154623.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-08T15:23:43.621Z,1510154623.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:43.975Z,1510154623.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:43.991Z,1510154623.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T15:23:43.992Z,1510154623.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:44.407Z,1510154624.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:44.501Z,1510154624.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2017-11-08T15:23:44.502Z,1510154624.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:45.078Z,1510154625.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:45.094Z,1510154625.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-08T15:23:45.094Z,1510154625.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:45.231Z,1510154625.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:45.279Z,1510154625.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-08T15:23:45.280Z,1510154625.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:45.642Z,1510154625.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:45.740Z,1510154625.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:46.002Z,1510154626.002 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T15:23:46.002Z,1510154626.002 [NAL9602] Data Fault, FailCount= 2
2017-11-08T15:23:46.002Z,1510154626.002 [NAL9602](ERROR): Data Fault
2017-11-08T15:23:46.020Z,1510154626.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:46.049Z,1510154626.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:46.144Z,1510154626.144 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T15:23:46.402Z,1510154626.402 [NAL9602](INFO): Powering down
2017-11-08T15:23:46.420Z,1510154626.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:46.437Z,1510154626.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:46.822Z,1510154626.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:46.839Z,1510154626.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:47.223Z,1510154627.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:47.239Z,1510154627.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:47.344Z,1510154627.344 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T15:23:47.344Z,1510154627.344 [NAL9602] No Fault, FailCount= 2
2017-11-08T15:23:47.620Z,1510154627.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:47.636Z,1510154627.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:48.024Z,1510154628.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:48.040Z,1510154628.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:48.425Z,1510154628.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:48.441Z,1510154628.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:48.824Z,1510154628.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:48.840Z,1510154628.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:49.229Z,1510154629.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:49.245Z,1510154629.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:49.625Z,1510154629.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:49.641Z,1510154629.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:50.026Z,1510154630.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:50.042Z,1510154630.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:50.425Z,1510154630.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:50.441Z,1510154630.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:50.826Z,1510154630.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:50.842Z,1510154630.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:51.226Z,1510154631.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:51.290Z,1510154631.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:51.626Z,1510154631.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:51.669Z,1510154631.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:52.026Z,1510154632.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:52.042Z,1510154632.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:52.426Z,1510154632.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:52.442Z,1510154632.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:52.828Z,1510154632.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:52.844Z,1510154632.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:53.225Z,1510154633.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:53.249Z,1510154633.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:53.629Z,1510154633.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:53.645Z,1510154633.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:54.028Z,1510154634.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:54.044Z,1510154634.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:54.428Z,1510154634.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:54.444Z,1510154634.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:54.829Z,1510154634.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:54.895Z,1510154634.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:55.227Z,1510154635.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:55.277Z,1510154635.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:55.628Z,1510154635.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:55.644Z,1510154635.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:56.028Z,1510154636.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:56.045Z,1510154636.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:56.428Z,1510154636.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:56.481Z,1510154636.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:56.824Z,1510154636.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:56.840Z,1510154636.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:57.230Z,1510154637.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:57.289Z,1510154637.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:57.629Z,1510154637.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:57.651Z,1510154637.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:58.028Z,1510154638.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:58.043Z,1510154638.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:58.428Z,1510154638.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:58.444Z,1510154638.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:58.828Z,1510154638.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:58.844Z,1510154638.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:59.229Z,1510154639.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:59.244Z,1510154639.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:23:59.624Z,1510154639.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:23:59.641Z,1510154639.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:00.028Z,1510154640.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:00.043Z,1510154640.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:00.427Z,1510154640.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:00.442Z,1510154640.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:00.825Z,1510154640.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:00.841Z,1510154640.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:01.225Z,1510154641.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:01.248Z,1510154641.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:01.628Z,1510154641.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:01.643Z,1510154641.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:02.025Z,1510154642.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:02.041Z,1510154642.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:02.429Z,1510154642.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:02.444Z,1510154642.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:02.828Z,1510154642.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:02.844Z,1510154642.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:03.229Z,1510154643.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:03.246Z,1510154643.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:03.628Z,1510154643.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:03.644Z,1510154643.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:04.029Z,1510154644.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:04.051Z,1510154644.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:04.428Z,1510154644.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:04.445Z,1510154644.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:04.828Z,1510154644.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:04.844Z,1510154644.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:05.229Z,1510154645.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:05.245Z,1510154645.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:05.625Z,1510154645.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:05.682Z,1510154645.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:06.029Z,1510154646.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:06.045Z,1510154646.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:06.429Z,1510154646.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:06.445Z,1510154646.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:06.829Z,1510154646.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:06.845Z,1510154646.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:07.229Z,1510154647.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:07.251Z,1510154647.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:07.629Z,1510154647.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:07.655Z,1510154647.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:08.025Z,1510154648.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:08.041Z,1510154648.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:08.433Z,1510154648.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:08.448Z,1510154648.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:08.830Z,1510154648.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:08.846Z,1510154648.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:09.226Z,1510154649.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:09.242Z,1510154649.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:09.625Z,1510154649.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:09.641Z,1510154649.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:10.029Z,1510154650.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:10.051Z,1510154650.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:10.424Z,1510154650.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:10.441Z,1510154650.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:10.828Z,1510154650.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:10.844Z,1510154650.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:11.229Z,1510154651.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:11.251Z,1510154651.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:11.625Z,1510154651.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:11.642Z,1510154651.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:12.024Z,1510154652.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:12.048Z,1510154652.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:12.429Z,1510154652.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:12.457Z,1510154652.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:12.828Z,1510154652.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:12.845Z,1510154652.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:13.229Z,1510154653.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:13.245Z,1510154653.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:13.629Z,1510154653.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:13.650Z,1510154653.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:14.029Z,1510154654.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:14.045Z,1510154654.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:14.424Z,1510154654.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:14.440Z,1510154654.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:14.829Z,1510154654.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:14.846Z,1510154654.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:15.229Z,1510154655.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:15.246Z,1510154655.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:15.629Z,1510154655.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:15.645Z,1510154655.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:16.029Z,1510154656.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:16.045Z,1510154656.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:16.406Z,1510154656.406 [NAL9602](INFO): Powering up NAL9602
2017-11-08T15:24:16.434Z,1510154656.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:16.451Z,1510154656.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:16.829Z,1510154656.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:16.851Z,1510154656.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:17.229Z,1510154657.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:17.299Z,1510154657.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:17.633Z,1510154657.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:17.696Z,1510154657.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:18.023Z,1510154658.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:18.048Z,1510154658.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:18.423Z,1510154658.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:18.493Z,1510154658.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:18.819Z,1510154658.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:18.845Z,1510154658.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:19.220Z,1510154659.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:19.369Z,1510154659.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:19.640Z,1510154659.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:19.725Z,1510154659.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:20.077Z,1510154660.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:20.105Z,1510154660.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:20.423Z,1510154660.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:20.467Z,1510154660.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:20.823Z,1510154660.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:20.840Z,1510154660.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:21.219Z,1510154661.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:21.235Z,1510154661.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:21.619Z,1510154661.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:21.634Z,1510154661.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:22.019Z,1510154662.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:22.039Z,1510154662.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:22.423Z,1510154662.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:22.443Z,1510154662.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:22.823Z,1510154662.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:22.839Z,1510154662.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:23.223Z,1510154663.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:23.243Z,1510154663.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:23.622Z,1510154663.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:23.638Z,1510154663.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:24.022Z,1510154664.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:24.038Z,1510154664.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:24.426Z,1510154664.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:24.442Z,1510154664.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:24.826Z,1510154664.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:24.842Z,1510154664.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:25.223Z,1510154665.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:25.240Z,1510154665.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:25.623Z,1510154665.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:25.640Z,1510154665.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:26.026Z,1510154666.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:26.042Z,1510154666.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:26.423Z,1510154666.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:26.444Z,1510154666.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:26.823Z,1510154666.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:26.839Z,1510154666.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:27.237Z,1510154667.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:27.273Z,1510154667.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:27.602Z,1510154667.602 [NAL9602](INFO): NAL9602 initialized
2017-11-08T15:24:27.628Z,1510154667.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:27.682Z,1510154667.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:28.025Z,1510154668.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:28.041Z,1510154668.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:28.442Z,1510154668.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:28.474Z,1510154668.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:28.834Z,1510154668.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:28.850Z,1510154668.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:29.225Z,1510154669.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:29.241Z,1510154669.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:29.649Z,1510154669.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:29.678Z,1510154669.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:30.038Z,1510154670.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:30.074Z,1510154670.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:30.715Z,1510154670.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:30.735Z,1510154670.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:30.844Z,1510154670.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:30.899Z,1510154670.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:31.254Z,1510154671.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:31.283Z,1510154671.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:31.659Z,1510154671.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:31.684Z,1510154671.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:32.058Z,1510154672.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:32.099Z,1510154672.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:32.439Z,1510154672.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:32.456Z,1510154672.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:32.839Z,1510154672.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:32.855Z,1510154672.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:33.244Z,1510154673.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:33.264Z,1510154673.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:33.676Z,1510154673.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:33.696Z,1510154673.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:34.043Z,1510154674.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:34.063Z,1510154674.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:34.463Z,1510154674.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:34.495Z,1510154674.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:35.172Z,1510154675.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:35.195Z,1510154675.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:35.308Z,1510154675.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:35.345Z,1510154675.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:35.729Z,1510154675.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:35.745Z,1510154675.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:36.118Z,1510154676.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:36.148Z,1510154676.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:36.513Z,1510154676.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:36.540Z,1510154676.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:36.908Z,1510154676.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:36.944Z,1510154676.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:37.029Z,1510154677.029 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:24:37.029Z,1510154677.029 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T15:24:37.299Z,1510154677.299 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:24:37.299Z,1510154677.299 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:24:37.299Z,1510154677.299 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:24:37.299Z,1510154677.299 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T15:24:37.300Z,1510154677.300 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:24:37.304Z,1510154677.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:37.356Z,1510154677.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:37.441Z,1510154677.441 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:24:37.701Z,1510154677.701 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:24:37.753Z,1510154677.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:37.802Z,1510154677.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:37.904Z,1510154677.904 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:24:38.122Z,1510154678.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:38.139Z,1510154678.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:38.796Z,1510154678.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:38.813Z,1510154678.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:38.925Z,1510154678.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:38.933Z,1510154678.933 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T15:24:38.934Z,1510154678.934 [BPC1] Data Fault, FailCount= 1
2017-11-08T15:24:38.934Z,1510154678.934 [BPC1](ERROR): Data Fault
2017-11-08T15:24:38.955Z,1510154678.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:39.053Z,1510154679.053 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T15:24:39.346Z,1510154679.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:39.380Z,1510154679.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:39.457Z,1510154679.457 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:24:39.457Z,1510154679.457 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T15:24:39.521Z,1510154679.521 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:24:39.521Z,1510154679.521 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:24:39.521Z,1510154679.521 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:24:39.521Z,1510154679.521 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T15:24:39.521Z,1510154679.521 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:24:39.742Z,1510154679.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:39.768Z,1510154679.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:39.845Z,1510154679.845 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:24:39.925Z,1510154679.925 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:24:40.007Z,1510154680.007 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:24:40.146Z,1510154680.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:40.175Z,1510154680.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:40.257Z,1510154680.257 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T15:24:40.257Z,1510154680.257 [BPC1] No Fault, FailCount= 1
2017-11-08T15:24:40.532Z,1510154680.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:40.617Z,1510154680.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:40.931Z,1510154680.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:40.968Z,1510154680.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:41.332Z,1510154681.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:41.348Z,1510154681.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:41.441Z,1510154681.441 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:24:41.441Z,1510154681.441 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T15:24:41.621Z,1510154681.621 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:24:41.621Z,1510154681.621 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:24:41.621Z,1510154681.621 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:24:41.621Z,1510154681.621 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T15:24:41.622Z,1510154681.622 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:24:41.767Z,1510154681.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:41.792Z,1510154681.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:41.873Z,1510154681.873 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:24:42.025Z,1510154682.025 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:24:42.137Z,1510154682.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:42.152Z,1510154682.152 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:24:42.182Z,1510154682.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:42.545Z,1510154682.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:42.573Z,1510154682.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:43.220Z,1510154683.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:43.236Z,1510154683.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:43.337Z,1510154683.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:43.366Z,1510154683.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:43.449Z,1510154683.449 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:24:43.449Z,1510154683.449 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T15:24:43.754Z,1510154683.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:43.765Z,1510154683.765 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:24:43.765Z,1510154683.765 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:24:43.765Z,1510154683.765 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:24:43.765Z,1510154683.765 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T15:24:43.765Z,1510154683.765 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:24:43.814Z,1510154683.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:43.893Z,1510154683.893 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:24:44.153Z,1510154684.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:44.169Z,1510154684.169 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:24:44.222Z,1510154684.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:44.333Z,1510154684.333 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:24:44.558Z,1510154684.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:44.585Z,1510154684.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:44.947Z,1510154684.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:44.983Z,1510154684.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:45.343Z,1510154685.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:45.359Z,1510154685.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:45.768Z,1510154685.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:45.785Z,1510154685.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:45.866Z,1510154685.866 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:24:45.866Z,1510154685.866 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T15:24:45.949Z,1510154685.949 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:24:45.949Z,1510154685.949 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:24:45.949Z,1510154685.949 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:24:45.949Z,1510154685.949 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T15:24:45.950Z,1510154685.950 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:24:46.157Z,1510154686.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:46.191Z,1510154686.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:46.266Z,1510154686.266 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:24:46.266Z,1510154686.266 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:24:46.353Z,1510154686.353 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:24:46.441Z,1510154686.441 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:24:46.846Z,1510154686.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:46.886Z,1510154686.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:46.991Z,1510154686.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:47.028Z,1510154687.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:47.410Z,1510154687.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:47.440Z,1510154687.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:47.809Z,1510154687.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:47.835Z,1510154687.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:48.206Z,1510154688.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:48.231Z,1510154688.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:48.599Z,1510154688.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:48.652Z,1510154688.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:48.995Z,1510154688.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:49.011Z,1510154689.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:49.400Z,1510154689.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:49.433Z,1510154689.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:49.828Z,1510154689.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:49.844Z,1510154689.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:50.199Z,1510154690.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:50.215Z,1510154690.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:50.613Z,1510154690.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:50.644Z,1510154690.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:51.292Z,1510154691.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:51.309Z,1510154691.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:51.413Z,1510154691.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:51.447Z,1510154691.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:51.839Z,1510154691.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:51.860Z,1510154691.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:52.239Z,1510154692.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:52.254Z,1510154692.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:52.640Z,1510154692.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:52.657Z,1510154692.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:53.029Z,1510154693.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:53.045Z,1510154693.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:53.419Z,1510154693.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:53.444Z,1510154693.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:53.843Z,1510154693.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:53.860Z,1510154693.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:54.234Z,1510154694.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:54.325Z,1510154694.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:55.394Z,1510154695.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:55.410Z,1510154695.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:55.551Z,1510154695.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:55.599Z,1510154695.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:55.966Z,1510154695.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:55.998Z,1510154695.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:56.365Z,1510154696.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:56.399Z,1510154696.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:56.765Z,1510154696.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:56.799Z,1510154696.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:57.155Z,1510154697.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:57.190Z,1510154697.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:57.552Z,1510154697.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:57.590Z,1510154697.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:57.984Z,1510154697.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:58.001Z,1510154698.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:58.366Z,1510154698.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:58.413Z,1510154698.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:59.038Z,1510154699.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:59.059Z,1510154699.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:59.195Z,1510154699.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:59.239Z,1510154699.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:24:59.602Z,1510154699.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:24:59.635Z,1510154699.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:00.001Z,1510154700.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:00.018Z,1510154700.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:00.402Z,1510154700.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:00.491Z,1510154700.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:00.794Z,1510154700.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:00.810Z,1510154700.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:01.194Z,1510154701.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:01.215Z,1510154701.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:01.613Z,1510154701.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:01.667Z,1510154701.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:02.003Z,1510154702.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:02.020Z,1510154702.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:02.673Z,1510154702.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:02.720Z,1510154702.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:02.856Z,1510154702.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:02.903Z,1510154702.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:03.275Z,1510154703.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:03.302Z,1510154703.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:03.670Z,1510154703.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:03.702Z,1510154703.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:04.065Z,1510154704.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:04.111Z,1510154704.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:04.459Z,1510154704.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:04.502Z,1510154704.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:04.860Z,1510154704.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:04.879Z,1510154704.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:05.262Z,1510154705.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:05.279Z,1510154705.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:05.691Z,1510154705.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:05.708Z,1510154705.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:06.062Z,1510154706.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:06.101Z,1510154706.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:06.471Z,1510154706.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:06.478Z,1510154706.478 [PNI_TCM](ERROR): CRC does not match. Expected:0x15438 got:0x29638
2017-11-08T15:25:06.512Z,1510154706.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:07.151Z,1510154707.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:07.172Z,1510154707.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:07.297Z,1510154707.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:07.314Z,1510154707.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:07.703Z,1510154707.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:07.719Z,1510154707.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:08.100Z,1510154708.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:08.117Z,1510154708.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:08.499Z,1510154708.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:08.515Z,1510154708.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:08.893Z,1510154708.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:08.909Z,1510154708.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:09.293Z,1510154709.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:09.309Z,1510154709.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:09.710Z,1510154709.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:09.726Z,1510154709.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:10.105Z,1510154710.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:10.128Z,1510154710.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:10.778Z,1510154710.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:10.832Z,1510154710.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:10.965Z,1510154710.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:10.982Z,1510154710.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:11.382Z,1510154711.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:11.421Z,1510154711.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:11.786Z,1510154711.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:11.820Z,1510154711.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:12.182Z,1510154712.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:12.208Z,1510154712.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:12.573Z,1510154712.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:12.609Z,1510154712.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:12.972Z,1510154712.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:13.016Z,1510154713.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:13.377Z,1510154713.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:13.393Z,1510154713.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:13.794Z,1510154713.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:13.824Z,1510154713.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:14.175Z,1510154714.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:14.192Z,1510154714.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:14.586Z,1510154714.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:14.618Z,1510154714.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:15.288Z,1510154715.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:15.314Z,1510154715.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:15.433Z,1510154715.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:15.475Z,1510154715.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:15.846Z,1510154715.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:15.895Z,1510154715.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:16.245Z,1510154716.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:16.272Z,1510154716.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:16.642Z,1510154716.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:16.668Z,1510154716.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:17.032Z,1510154717.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:17.048Z,1510154717.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:17.433Z,1510154717.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:17.448Z,1510154717.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:17.850Z,1510154717.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:17.882Z,1510154717.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:18.246Z,1510154718.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:18.272Z,1510154718.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:18.911Z,1510154718.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:18.927Z,1510154718.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:19.030Z,1510154719.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:19.079Z,1510154719.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:19.446Z,1510154719.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:19.472Z,1510154719.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:19.845Z,1510154719.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:19.873Z,1510154719.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:20.251Z,1510154720.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:20.288Z,1510154720.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:20.636Z,1510154720.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:20.664Z,1510154720.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:21.038Z,1510154721.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:21.054Z,1510154721.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:21.439Z,1510154721.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:21.460Z,1510154721.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:21.862Z,1510154721.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:21.887Z,1510154721.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:22.238Z,1510154722.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:22.254Z,1510154722.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:22.650Z,1510154722.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:22.666Z,1510154722.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:23.331Z,1510154723.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:23.402Z,1510154723.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:23.501Z,1510154723.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:23.550Z,1510154723.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:23.928Z,1510154723.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:23.945Z,1510154723.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:24.327Z,1510154724.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:24.385Z,1510154724.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:24.729Z,1510154724.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:24.746Z,1510154724.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:25.108Z,1510154725.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:25.160Z,1510154725.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:25.508Z,1510154725.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:25.537Z,1510154725.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:25.937Z,1510154725.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:25.953Z,1510154725.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:26.329Z,1510154726.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:26.345Z,1510154726.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:26.989Z,1510154726.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:27.005Z,1510154727.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:27.105Z,1510154727.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:27.151Z,1510154727.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:27.528Z,1510154727.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:27.545Z,1510154727.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:27.931Z,1510154727.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:27.948Z,1510154727.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:28.329Z,1510154728.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:28.346Z,1510154728.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:28.711Z,1510154728.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:28.747Z,1510154728.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:29.111Z,1510154729.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:29.146Z,1510154729.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:29.508Z,1510154729.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:29.524Z,1510154729.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:29.940Z,1510154729.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:29.956Z,1510154729.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:30.307Z,1510154730.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:30.327Z,1510154730.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:30.721Z,1510154730.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:30.760Z,1510154730.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:31.406Z,1510154731.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:31.422Z,1510154731.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:31.558Z,1510154731.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:31.599Z,1510154731.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:31.965Z,1510154731.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:31.997Z,1510154731.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:32.365Z,1510154732.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:32.397Z,1510154732.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:32.765Z,1510154732.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:32.794Z,1510154732.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:33.154Z,1510154733.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:33.202Z,1510154733.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:33.555Z,1510154733.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:33.574Z,1510154733.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:33.977Z,1510154733.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:34.001Z,1510154734.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:34.365Z,1510154734.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:34.401Z,1510154734.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:35.047Z,1510154735.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:35.067Z,1510154735.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:35.179Z,1510154735.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:35.241Z,1510154735.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:35.600Z,1510154735.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:35.616Z,1510154735.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:35.995Z,1510154735.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:36.011Z,1510154736.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:36.391Z,1510154736.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:36.407Z,1510154736.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:36.775Z,1510154736.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:36.807Z,1510154736.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:37.176Z,1510154737.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:37.201Z,1510154737.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:37.602Z,1510154737.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:37.618Z,1510154737.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:37.980Z,1510154737.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:38.005Z,1510154738.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:38.379Z,1510154738.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:38.411Z,1510154738.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:38.799Z,1510154738.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:38.815Z,1510154738.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:39.466Z,1510154739.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:39.504Z,1510154739.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:39.615Z,1510154739.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:39.656Z,1510154739.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:40.022Z,1510154740.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:40.055Z,1510154740.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:40.421Z,1510154740.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:40.456Z,1510154740.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:40.826Z,1510154740.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:40.849Z,1510154740.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:41.215Z,1510154741.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:41.232Z,1510154741.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:41.648Z,1510154741.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:41.672Z,1510154741.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:42.026Z,1510154742.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:42.069Z,1510154742.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:42.707Z,1510154742.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:42.724Z,1510154742.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:42.831Z,1510154742.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:42.876Z,1510154742.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:43.252Z,1510154743.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:43.272Z,1510154743.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:43.657Z,1510154743.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:43.727Z,1510154743.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:44.053Z,1510154744.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:44.090Z,1510154744.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:44.431Z,1510154744.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:44.467Z,1510154744.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:44.831Z,1510154744.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:44.869Z,1510154744.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:45.232Z,1510154745.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:45.299Z,1510154745.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:45.658Z,1510154745.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:45.680Z,1510154745.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:46.031Z,1510154746.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:46.079Z,1510154746.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:46.453Z,1510154746.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:46.473Z,1510154746.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:47.122Z,1510154747.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:47.167Z,1510154747.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:47.280Z,1510154747.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:47.319Z,1510154747.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:47.693Z,1510154747.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:47.723Z,1510154747.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:48.089Z,1510154748.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:48.116Z,1510154748.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:48.493Z,1510154748.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:48.518Z,1510154748.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:48.881Z,1510154748.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:48.920Z,1510154748.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:49.282Z,1510154749.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:49.314Z,1510154749.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:49.715Z,1510154749.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:49.731Z,1510154749.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:50.097Z,1510154750.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:50.128Z,1510154750.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:50.770Z,1510154750.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:50.786Z,1510154750.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:50.888Z,1510154750.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:50.912Z,1510154750.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:51.316Z,1510154751.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:51.332Z,1510154751.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:51.701Z,1510154751.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:51.734Z,1510154751.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:52.102Z,1510154752.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:52.134Z,1510154752.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:52.495Z,1510154752.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:52.526Z,1510154752.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:52.888Z,1510154752.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:52.904Z,1510154752.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:53.288Z,1510154753.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:53.304Z,1510154753.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:53.724Z,1510154753.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:53.740Z,1510154753.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:54.091Z,1510154754.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:54.132Z,1510154754.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:54.505Z,1510154754.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:54.538Z,1510154754.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:55.210Z,1510154755.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:55.257Z,1510154755.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:55.399Z,1510154755.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:55.436Z,1510154755.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:55.806Z,1510154755.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:55.838Z,1510154755.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:56.209Z,1510154756.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:56.244Z,1510154756.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:56.610Z,1510154756.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:56.642Z,1510154756.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:56.996Z,1510154756.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:57.013Z,1510154757.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:57.398Z,1510154757.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:57.414Z,1510154757.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:57.814Z,1510154757.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:57.842Z,1510154757.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:58.210Z,1510154758.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:58.226Z,1510154758.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:58.880Z,1510154758.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:58.900Z,1510154758.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:59.013Z,1510154759.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:59.063Z,1510154759.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:59.430Z,1510154759.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:59.462Z,1510154759.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:25:59.829Z,1510154759.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:25:59.855Z,1510154759.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:00.226Z,1510154760.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:00.258Z,1510154760.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:00.619Z,1510154760.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:00.656Z,1510154760.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:01.019Z,1510154761.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:01.035Z,1510154761.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:01.420Z,1510154761.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:01.436Z,1510154761.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:01.848Z,1510154761.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:01.864Z,1510154761.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:02.219Z,1510154762.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:02.235Z,1510154762.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:02.634Z,1510154762.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:02.661Z,1510154762.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:03.314Z,1510154763.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:03.336Z,1510154763.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:03.470Z,1510154763.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:03.515Z,1510154763.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:03.878Z,1510154763.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:03.908Z,1510154763.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:04.277Z,1510154764.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:04.307Z,1510154764.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:04.677Z,1510154764.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:04.709Z,1510154764.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:05.066Z,1510154765.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:05.083Z,1510154765.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:05.466Z,1510154765.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:05.487Z,1510154765.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:05.895Z,1510154765.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:05.936Z,1510154765.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:06.281Z,1510154766.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:06.313Z,1510154766.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:06.986Z,1510154766.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:07.015Z,1510154767.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:07.125Z,1510154767.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:07.180Z,1510154767.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:07.542Z,1510154767.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:07.567Z,1510154767.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:07.945Z,1510154767.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:07.975Z,1510154767.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:08.346Z,1510154768.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:08.412Z,1510154768.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:08.731Z,1510154768.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:08.748Z,1510154768.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:09.135Z,1510154769.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:09.184Z,1510154769.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:09.532Z,1510154769.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:09.571Z,1510154769.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:09.964Z,1510154769.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:09.980Z,1510154769.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:10.339Z,1510154770.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:10.380Z,1510154770.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:10.741Z,1510154770.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:10.770Z,1510154770.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:11.427Z,1510154771.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:11.451Z,1510154771.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:11.583Z,1510154771.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:11.621Z,1510154771.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:11.989Z,1510154771.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:12.028Z,1510154772.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:12.386Z,1510154772.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:12.402Z,1510154772.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:12.785Z,1510154772.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:12.802Z,1510154772.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:13.180Z,1510154773.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:13.195Z,1510154773.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:13.598Z,1510154773.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:13.614Z,1510154773.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:13.990Z,1510154773.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:14.037Z,1510154774.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:14.661Z,1510154774.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:14.684Z,1510154774.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:14.798Z,1510154774.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:14.846Z,1510154774.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:15.214Z,1510154775.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:15.239Z,1510154775.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:15.617Z,1510154775.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:15.642Z,1510154775.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:16.010Z,1510154776.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:16.042Z,1510154776.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:16.403Z,1510154776.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:16.423Z,1510154776.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:16.807Z,1510154776.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:16.823Z,1510154776.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:17.207Z,1510154777.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:17.267Z,1510154777.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:17.636Z,1510154777.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:17.652Z,1510154777.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:18.003Z,1510154778.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:18.019Z,1510154778.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:18.421Z,1510154778.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:18.456Z,1510154778.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:19.095Z,1510154779.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:19.115Z,1510154779.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:19.223Z,1510154779.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:19.271Z,1510154779.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:19.639Z,1510154779.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:19.663Z,1510154779.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:20.043Z,1510154780.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:20.062Z,1510154780.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:20.444Z,1510154780.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:20.464Z,1510154780.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:20.819Z,1510154780.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:20.854Z,1510154780.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:21.224Z,1510154781.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:21.249Z,1510154781.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:21.651Z,1510154781.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:21.671Z,1510154781.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:22.044Z,1510154782.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:22.064Z,1510154782.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:22.705Z,1510154782.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:22.721Z,1510154782.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:22.855Z,1510154782.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:22.899Z,1510154782.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:23.271Z,1510154783.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:23.301Z,1510154783.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:23.667Z,1510154783.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:23.696Z,1510154783.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:24.073Z,1510154784.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:24.102Z,1510154784.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:24.462Z,1510154784.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:24.500Z,1510154784.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:24.857Z,1510154784.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:24.872Z,1510154784.872 [PNI_TCM](ERROR): CRC does not match. Expected:0x18498 got:0x1007
2017-11-08T15:26:24.893Z,1510154784.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:25.262Z,1510154785.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:25.295Z,1510154785.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:25.694Z,1510154785.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:25.710Z,1510154785.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:26.055Z,1510154786.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:26.097Z,1510154786.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:26.475Z,1510154786.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:26.501Z,1510154786.501 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:26.501Z,1510154786.501 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2017-11-08T15:26:26.502Z,1510154786.502 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T15:26:26.503Z,1510154786.503 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:26.503Z,1510154786.503 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41
2017-11-08T15:26:26.503Z,1510154786.503 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T15:26:26.505Z,1510154786.505 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:26.505Z,1510154786.505 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 41
2017-11-08T15:26:26.505Z,1510154786.505 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T15:26:26.581Z,1510154786.581 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T15:26:26.582Z,1510154786.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T15:26:26.582Z,1510154786.582 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T15:26:27.155Z,1510154787.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:27.245Z,1510154787.245 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T15:26:27.245Z,1510154787.245 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2017-11-08T15:26:27.245Z,1510154787.245 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T15:26:27.245Z,1510154787.245 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41
2017-11-08T15:26:27.246Z,1510154787.246 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T15:26:27.246Z,1510154787.246 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 41
2017-11-08T15:26:27.275Z,1510154787.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:27.320Z,1510154787.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T15:26:27.325Z,1510154787.325 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:26:27.325Z,1510154787.325 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:26:27.326Z,1510154787.326 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T15:26:27.326Z,1510154787.326 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:26:27.326Z,1510154787.326 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:26:27.327Z,1510154787.327 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T15:26:27.327Z,1510154787.327 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:26:27.327Z,1510154787.327 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:26:27.683Z,1510154787.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:27.690Z,1510154787.690 [PNI_TCM](ERROR): CRC does not match. Expected:0x18657 got:0x16834
2017-11-08T15:26:27.723Z,1510154787.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T15:26:27.724Z,1510154787.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:28.093Z,1510154788.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:28.123Z,1510154788.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T15:26:28.124Z,1510154788.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:28.489Z,1510154788.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:28.539Z,1510154788.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T15:26:28.540Z,1510154788.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:28.880Z,1510154788.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:28.897Z,1510154788.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T15:26:28.898Z,1510154788.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:29.281Z,1510154789.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:29.297Z,1510154789.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T15:26:29.298Z,1510154789.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:29.706Z,1510154789.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:29.747Z,1510154789.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T15:26:29.748Z,1510154789.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:30.089Z,1510154790.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:30.124Z,1510154790.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T15:26:30.125Z,1510154790.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:30.768Z,1510154790.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:30.784Z,1510154790.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2017-11-08T15:26:30.785Z,1510154790.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:30.897Z,1510154790.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:30.954Z,1510154790.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-08T15:26:30.955Z,1510154790.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:31.316Z,1510154791.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:31.331Z,1510154791.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T15:26:31.332Z,1510154791.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:31.702Z,1510154791.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:31.755Z,1510154791.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-08T15:26:31.756Z,1510154791.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:32.102Z,1510154792.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:32.126Z,1510154792.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T15:26:32.127Z,1510154792.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:32.495Z,1510154792.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:32.525Z,1510154792.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T15:26:32.526Z,1510154792.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:32.888Z,1510154792.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:32.903Z,1510154792.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T15:26:32.913Z,1510154792.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:33.288Z,1510154793.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:33.303Z,1510154793.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T15:26:33.304Z,1510154793.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:33.720Z,1510154793.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:33.735Z,1510154793.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T15:26:33.736Z,1510154793.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:34.091Z,1510154794.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:34.127Z,1510154794.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T15:26:34.128Z,1510154794.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:34.509Z,1510154794.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:34.539Z,1510154794.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T15:26:34.540Z,1510154794.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:35.175Z,1510154795.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:35.191Z,1510154795.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2017-11-08T15:26:35.192Z,1510154795.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:35.295Z,1510154795.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:35.311Z,1510154795.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T15:26:35.312Z,1510154795.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:35.714Z,1510154795.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:35.743Z,1510154795.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T15:26:35.744Z,1510154795.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:36.113Z,1510154796.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:36.138Z,1510154796.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T15:26:36.139Z,1510154796.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:36.510Z,1510154796.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:36.535Z,1510154796.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T15:26:36.536Z,1510154796.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:36.903Z,1510154796.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:36.935Z,1510154796.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T15:26:36.936Z,1510154796.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:37.304Z,1510154797.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:37.319Z,1510154797.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T15:26:37.320Z,1510154797.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:37.717Z,1510154797.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:37.749Z,1510154797.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T15:26:37.750Z,1510154797.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:38.113Z,1510154798.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:38.147Z,1510154798.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T15:26:38.148Z,1510154798.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:39.038Z,1510154799.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:39.054Z,1510154799.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2017-11-08T15:26:39.055Z,1510154799.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:39.154Z,1510154799.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:39.200Z,1510154799.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2017-11-08T15:26:39.201Z,1510154799.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:39.577Z,1510154799.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:39.604Z,1510154799.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2017-11-08T15:26:39.605Z,1510154799.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:39.980Z,1510154799.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:40.033Z,1510154800.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2017-11-08T15:26:40.033Z,1510154800.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:40.380Z,1510154800.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:40.397Z,1510154800.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2017-11-08T15:26:40.398Z,1510154800.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:40.764Z,1510154800.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:40.791Z,1510154800.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2017-11-08T15:26:40.792Z,1510154800.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:41.161Z,1510154801.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:41.196Z,1510154801.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2017-11-08T15:26:41.197Z,1510154801.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:41.561Z,1510154801.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:41.588Z,1510154801.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2017-11-08T15:26:41.589Z,1510154801.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:41.986Z,1510154801.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:42.007Z,1510154802.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2017-11-08T15:26:42.009Z,1510154802.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:42.378Z,1510154802.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:42.393Z,1510154802.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2017-11-08T15:26:42.394Z,1510154802.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:43.051Z,1510154803.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:43.067Z,1510154803.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-08T15:26:43.068Z,1510154803.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:43.180Z,1510154803.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:43.227Z,1510154803.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2017-11-08T15:26:43.228Z,1510154803.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:43.601Z,1510154803.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:43.617Z,1510154803.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2017-11-08T15:26:43.618Z,1510154803.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:43.995Z,1510154803.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:44.012Z,1510154804.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2017-11-08T15:26:44.013Z,1510154804.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:44.396Z,1510154804.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:44.413Z,1510154804.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2017-11-08T15:26:44.414Z,1510154804.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:44.779Z,1510154804.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:44.805Z,1510154804.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2017-11-08T15:26:44.806Z,1510154804.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:45.180Z,1510154805.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:45.211Z,1510154805.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2017-11-08T15:26:45.213Z,1510154805.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:45.607Z,1510154805.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:45.623Z,1510154805.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2017-11-08T15:26:45.624Z,1510154805.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:46.001Z,1510154806.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:46.016Z,1510154806.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2017-11-08T15:26:46.017Z,1510154806.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:46.678Z,1510154806.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:46.699Z,1510154806.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:46.809Z,1510154806.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:46.851Z,1510154806.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:47.222Z,1510154807.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:47.239Z,1510154807.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:47.623Z,1510154807.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:47.640Z,1510154807.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:48.019Z,1510154808.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:48.040Z,1510154808.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:48.414Z,1510154808.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:48.430Z,1510154808.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:48.813Z,1510154808.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:48.830Z,1510154808.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:49.214Z,1510154809.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:49.231Z,1510154809.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:49.634Z,1510154809.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:49.662Z,1510154809.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:50.013Z,1510154810.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:50.036Z,1510154810.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:50.421Z,1510154810.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:50.438Z,1510154810.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:51.094Z,1510154811.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:51.139Z,1510154811.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:51.275Z,1510154811.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:51.296Z,1510154811.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:51.691Z,1510154811.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:51.722Z,1510154811.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:52.089Z,1510154812.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:52.123Z,1510154812.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:52.486Z,1510154812.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:52.544Z,1510154812.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:52.874Z,1510154812.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:52.923Z,1510154812.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:53.276Z,1510154813.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:53.283Z,1510154813.283 [PNI_TCM](ERROR): CRC does not match. Expected:0x62811 got:0x17031
2017-11-08T15:26:53.333Z,1510154813.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:53.707Z,1510154813.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:53.727Z,1510154813.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:54.090Z,1510154814.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:54.135Z,1510154814.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:54.760Z,1510154814.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:54.776Z,1510154814.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:54.900Z,1510154814.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:54.936Z,1510154814.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:55.324Z,1510154815.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:55.347Z,1510154815.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:55.724Z,1510154815.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:55.741Z,1510154815.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:56.120Z,1510154816.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:56.137Z,1510154816.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:56.504Z,1510154816.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:56.536Z,1510154816.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:56.904Z,1510154816.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:56.929Z,1510154816.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:57.304Z,1510154817.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:57.338Z,1510154817.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:57.730Z,1510154817.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:57.746Z,1510154817.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:58.103Z,1510154818.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:58.129Z,1510154818.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:58.520Z,1510154818.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:26:58.536Z,1510154818.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:59.222Z,1510154819.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:59.372Z,1510154819.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:26:59.776Z,1510154819.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:00.177Z,1510154820.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:00.582Z,1510154820.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:00.959Z,1510154820.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:01.363Z,1510154821.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:01.786Z,1510154821.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:02.207Z,1510154822.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:02.839Z,1510154822.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:02.966Z,1510154822.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:03.399Z,1510154823.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:03.799Z,1510154823.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:04.194Z,1510154824.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:04.572Z,1510154824.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:04.971Z,1510154824.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:05.373Z,1510154825.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:05.804Z,1510154825.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:06.174Z,1510154826.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:06.597Z,1510154826.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:07.307Z,1510154827.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:07.457Z,1510154827.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:07.854Z,1510154827.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:08.249Z,1510154828.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:08.650Z,1510154828.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:09.051Z,1510154829.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:09.451Z,1510154829.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:09.859Z,1510154829.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:10.259Z,1510154830.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:10.946Z,1510154830.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:11.105Z,1510154831.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:11.502Z,1510154831.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:11.902Z,1510154831.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:12.298Z,1510154832.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:12.680Z,1510154832.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:13.108Z,1510154833.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:13.480Z,1510154833.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:13.919Z,1510154833.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:14.427Z,1510154834.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:14.751Z,1510154834.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:15.388Z,1510154835.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:15.547Z,1510154835.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:15.985Z,1510154835.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:16.351Z,1510154836.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:16.746Z,1510154836.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:17.127Z,1510154837.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:17.524Z,1510154837.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:17.954Z,1510154837.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:18.369Z,1510154838.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:19.008Z,1510154839.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:19.158Z,1510154839.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:19.555Z,1510154839.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:19.949Z,1510154839.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:20.352Z,1510154840.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:20.739Z,1510154840.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:21.131Z,1510154841.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:21.560Z,1510154841.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:21.963Z,1510154841.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:22.326Z,1510154842.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:22.757Z,1510154842.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:23.429Z,1510154843.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:23.580Z,1510154843.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:24.011Z,1510154844.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:24.377Z,1510154844.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:24.784Z,1510154844.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:25.168Z,1510154845.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:25.565Z,1510154845.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:25.981Z,1510154845.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:26.376Z,1510154846.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:27.057Z,1510154847.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:27.218Z,1510154847.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:27.615Z,1510154847.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:28.019Z,1510154848.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:28.413Z,1510154848.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:28.808Z,1510154848.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:29.210Z,1510154849.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:29.620Z,1510154849.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:30.008Z,1510154850.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:30.408Z,1510154850.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:30.810Z,1510154850.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:31.523Z,1510154851.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:31.670Z,1510154851.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:32.075Z,1510154852.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:32.473Z,1510154852.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:32.887Z,1510154852.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:33.259Z,1510154853.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:33.662Z,1510154853.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:34.062Z,1510154854.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:34.478Z,1510154854.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:34.906Z,1510154854.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:35.275Z,1510154855.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:35.937Z,1510154855.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:36.107Z,1510154856.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:36.507Z,1510154856.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:36.906Z,1510154856.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:37.307Z,1510154857.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:37.711Z,1510154857.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:38.080Z,1510154858.080 [PNI_TCM](ERROR): CRC does not match. Expected:0x36114 got:0x29865
2017-11-08T15:27:38.108Z,1510154858.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:38.508Z,1510154858.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:38.915Z,1510154858.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:39.297Z,1510154859.297 [BPC1](ERROR): Failed to receive battery data
2017-11-08T15:27:39.297Z,1510154859.297 [BPC1] Communications Fault, FailCount= 1
2017-11-08T15:27:39.297Z,1510154859.297 [BPC1](ERROR): Communications Fault
2017-11-08T15:27:39.306Z,1510154859.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:39.385Z,1510154859.385 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T15:27:39.690Z,1510154859.690 [PNI_TCM](ERROR): CRC does not match. Expected:0x11321 got:0x16243
2017-11-08T15:27:39.715Z,1510154859.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:40.382Z,1510154860.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:40.520Z,1510154860.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:40.609Z,1510154860.609 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T15:27:40.609Z,1510154860.609 [BPC1] No Fault, FailCount= 1
2017-11-08T15:27:40.983Z,1510154860.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:41.335Z,1510154861.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:41.732Z,1510154861.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:42.115Z,1510154862.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:42.519Z,1510154862.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:42.937Z,1510154862.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:43.332Z,1510154863.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:43.994Z,1510154863.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:44.147Z,1510154864.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:44.571Z,1510154864.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:44.972Z,1510154864.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:45.375Z,1510154865.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:45.747Z,1510154865.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:46.146Z,1510154866.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:46.548Z,1510154866.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:46.977Z,1510154866.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:47.351Z,1510154867.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:47.774Z,1510154867.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:48.438Z,1510154868.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:48.579Z,1510154868.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:49.016Z,1510154869.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:49.391Z,1510154869.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:49.791Z,1510154869.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:50.176Z,1510154870.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:50.576Z,1510154870.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:50.994Z,1510154870.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:51.395Z,1510154871.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:52.049Z,1510154872.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:52.199Z,1510154872.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:52.629Z,1510154872.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:53.023Z,1510154873.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:53.425Z,1510154873.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:53.803Z,1510154873.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:54.201Z,1510154874.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:54.635Z,1510154874.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:55.025Z,1510154875.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:55.399Z,1510154875.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:55.825Z,1510154875.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:56.535Z,1510154876.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:56.665Z,1510154876.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:57.082Z,1510154877.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:57.483Z,1510154877.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:57.876Z,1510154877.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:58.272Z,1510154878.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:58.675Z,1510154878.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:59.072Z,1510154879.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:59.468Z,1510154879.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:27:59.925Z,1510154879.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:00.277Z,1510154880.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:00.983Z,1510154880.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:01.139Z,1510154881.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:01.575Z,1510154881.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:01.939Z,1510154881.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:02.333Z,1510154882.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:02.729Z,1510154882.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:03.128Z,1510154883.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:03.532Z,1510154883.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:03.943Z,1510154883.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:04.331Z,1510154884.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:04.737Z,1510154884.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:05.409Z,1510154885.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:05.583Z,1510154885.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:05.976Z,1510154885.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:06.378Z,1510154886.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:06.778Z,1510154886.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:07.154Z,1510154887.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:07.582Z,1510154887.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:07.986Z,1510154887.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:08.379Z,1510154888.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:09.047Z,1510154889.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:09.204Z,1510154889.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:09.635Z,1510154889.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:09.995Z,1510154889.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:10.391Z,1510154890.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:10.783Z,1510154890.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:11.183Z,1510154891.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:11.584Z,1510154891.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:12.007Z,1510154892.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:12.379Z,1510154892.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:12.796Z,1510154892.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:13.497Z,1510154893.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:13.643Z,1510154893.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:14.035Z,1510154894.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:14.439Z,1510154894.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:14.839Z,1510154894.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:15.232Z,1510154895.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:15.655Z,1510154895.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:16.036Z,1510154896.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:16.732Z,1510154896.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:16.887Z,1510154896.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:17.287Z,1510154897.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:17.699Z,1510154897.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:18.084Z,1510154898.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.385511 seconds old.
2017-11-08T15:28:18.085Z,1510154898.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:18.086Z,1510154898.086 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.386204 seconds old.
2017-11-08T15:28:18.087Z,1510154898.087 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.386488 seconds old.
2017-11-08T15:28:18.485Z,1510154898.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.786965 seconds old.
2017-11-08T15:28:18.486Z,1510154898.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:18.487Z,1510154898.487 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.787307 seconds old.
2017-11-08T15:28:18.489Z,1510154898.489 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.787561 seconds old.
2017-11-08T15:28:18.884Z,1510154898.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:19.288Z,1510154899.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:19.697Z,1510154899.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:20.103Z,1510154900.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:20.492Z,1510154900.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:21.160Z,1510154901.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:21.337Z,1510154901.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:21.757Z,1510154901.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:22.110Z,1510154902.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:22.140Z,1510154902.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:22.520Z,1510154902.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:22.584Z,1510154902.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:22.900Z,1510154902.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:22.936Z,1510154902.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:23.300Z,1510154903.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:23.351Z,1510154903.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:23.731Z,1510154903.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:23.747Z,1510154903.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:24.124Z,1510154904.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:24.147Z,1510154904.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:24.790Z,1510154904.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:24.811Z,1510154904.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:24.947Z,1510154904.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:24.963Z,1510154904.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:25.357Z,1510154905.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:25.391Z,1510154905.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:25.757Z,1510154905.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:25.786Z,1510154905.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:26.161Z,1510154906.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:26.194Z,1510154906.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:26.551Z,1510154906.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:26.567Z,1510154906.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:26.944Z,1510154906.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:26.961Z,1510154906.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:27.348Z,1510154907.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:27.364Z,1510154907.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:27.784Z,1510154907.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:27.800Z,1510154907.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:28.144Z,1510154908.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:28.161Z,1510154908.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:28.561Z,1510154908.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:28.593Z,1510154908.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:29.235Z,1510154909.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:29.250Z,1510154909.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:29.361Z,1510154909.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:29.386Z,1510154909.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:29.782Z,1510154909.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:29.804Z,1510154909.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:30.185Z,1510154910.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:30.207Z,1510154910.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:30.589Z,1510154910.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:30.605Z,1510154910.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:30.967Z,1510154910.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:31.002Z,1510154911.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:31.368Z,1510154911.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:31.425Z,1510154911.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:31.795Z,1510154911.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:31.812Z,1510154911.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:32.189Z,1510154912.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:32.205Z,1510154912.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:32.844Z,1510154912.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:32.864Z,1510154912.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:32.965Z,1510154912.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:32.994Z,1510154912.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:33.389Z,1510154913.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:33.405Z,1510154913.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:33.793Z,1510154913.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:33.809Z,1510154913.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:34.178Z,1510154914.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:34.214Z,1510154914.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:34.571Z,1510154914.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:34.606Z,1510154914.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:34.967Z,1510154914.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:35.004Z,1510154915.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:35.368Z,1510154915.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:35.406Z,1510154915.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:35.800Z,1510154915.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:35.816Z,1510154915.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:36.167Z,1510154916.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:36.183Z,1510154916.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:36.582Z,1510154916.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:36.615Z,1510154916.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:37.258Z,1510154917.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:37.278Z,1510154917.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:37.423Z,1510154917.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:37.459Z,1510154917.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:37.830Z,1510154917.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:37.861Z,1510154917.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:38.233Z,1510154918.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:38.260Z,1510154918.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:38.633Z,1510154918.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:38.661Z,1510154918.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:39.019Z,1510154919.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:39.040Z,1510154919.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:39.420Z,1510154919.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:39.436Z,1510154919.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:39.841Z,1510154919.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:39.866Z,1510154919.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:40.232Z,1510154920.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:40.266Z,1510154920.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:40.908Z,1510154920.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:40.931Z,1510154920.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:41.029Z,1510154921.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:41.079Z,1510154921.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:41.456Z,1510154921.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:41.472Z,1510154921.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:41.855Z,1510154921.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:41.925Z,1510154921.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:42.256Z,1510154922.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:42.272Z,1510154922.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:42.639Z,1510154922.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:42.664Z,1510154922.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:43.035Z,1510154923.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:43.065Z,1510154923.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:43.436Z,1510154923.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:43.471Z,1510154923.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:43.866Z,1510154923.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:43.938Z,1510154923.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:44.235Z,1510154924.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:44.265Z,1510154924.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:44.657Z,1510154924.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:44.715Z,1510154924.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:45.322Z,1510154925.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:45.338Z,1510154925.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:45.471Z,1510154925.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:45.527Z,1510154925.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:45.878Z,1510154925.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:45.910Z,1510154925.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:46.273Z,1510154926.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:46.290Z,1510154926.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:46.678Z,1510154926.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:46.694Z,1510154926.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:47.066Z,1510154927.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:47.083Z,1510154927.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:47.467Z,1510154927.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:47.488Z,1510154927.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:47.890Z,1510154927.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:47.913Z,1510154927.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:48.277Z,1510154928.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:48.294Z,1510154928.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:48.950Z,1510154928.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:48.967Z,1510154928.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:49.079Z,1510154929.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:49.123Z,1510154929.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:49.494Z,1510154929.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:49.524Z,1510154929.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:49.890Z,1510154929.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:49.915Z,1510154929.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:50.290Z,1510154930.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:50.314Z,1510154930.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:50.679Z,1510154930.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:50.696Z,1510154930.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:51.079Z,1510154931.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:51.096Z,1510154931.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:51.480Z,1510154931.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:51.523Z,1510154931.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:51.912Z,1510154931.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:51.928Z,1510154931.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:52.275Z,1510154932.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:52.296Z,1510154932.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:52.694Z,1510154932.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:52.720Z,1510154932.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:53.481Z,1510154933.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:53.497Z,1510154933.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:53.629Z,1510154933.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:53.692Z,1510154933.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:54.047Z,1510154934.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:54.084Z,1510154934.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:54.445Z,1510154934.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:54.489Z,1510154934.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:54.846Z,1510154934.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:54.878Z,1510154934.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:55.235Z,1510154935.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:55.274Z,1510154935.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:55.635Z,1510154935.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:55.673Z,1510154935.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:56.031Z,1510154936.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:56.067Z,1510154936.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:56.436Z,1510154936.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:56.452Z,1510154936.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:56.871Z,1510154936.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:56.887Z,1510154936.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:57.251Z,1510154937.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:57.277Z,1510154937.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:57.930Z,1510154937.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:57.951Z,1510154937.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:58.085Z,1510154938.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:58.102Z,1510154938.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:58.498Z,1510154938.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:58.522Z,1510154938.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:58.894Z,1510154938.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:58.919Z,1510154938.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:59.292Z,1510154939.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:59.323Z,1510154939.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:28:59.682Z,1510154939.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:28:59.770Z,1510154939.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:00.081Z,1510154940.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:00.142Z,1510154940.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:00.490Z,1510154940.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:00.507Z,1510154940.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:00.910Z,1510154940.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:00.938Z,1510154940.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:01.287Z,1510154941.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:01.303Z,1510154941.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:01.700Z,1510154941.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:01.716Z,1510154941.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:02.374Z,1510154942.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:02.396Z,1510154942.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:02.515Z,1510154942.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:02.547Z,1510154942.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:02.940Z,1510154942.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:02.957Z,1510154942.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:03.334Z,1510154943.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:03.351Z,1510154943.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:03.733Z,1510154943.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:03.749Z,1510154943.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:04.120Z,1510154944.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:04.145Z,1510154944.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:04.516Z,1510154944.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:04.572Z,1510154944.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:04.947Z,1510154944.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:04.964Z,1510154944.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:05.340Z,1510154945.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:05.356Z,1510154945.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:06.014Z,1510154946.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:06.066Z,1510154946.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:06.171Z,1510154946.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:06.207Z,1510154946.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:06.593Z,1510154946.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:06.610Z,1510154946.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:06.986Z,1510154946.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:07.046Z,1510154947.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:07.392Z,1510154947.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:07.409Z,1510154947.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:07.772Z,1510154947.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:07.816Z,1510154947.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:08.172Z,1510154948.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:08.202Z,1510154948.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:08.572Z,1510154948.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:08.602Z,1510154948.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:09.003Z,1510154949.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:09.019Z,1510154949.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:09.372Z,1510154949.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:09.408Z,1510154949.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:09.796Z,1510154949.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:09.819Z,1510154949.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:10.539Z,1510154950.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:10.555Z,1510154950.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:10.665Z,1510154950.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:10.711Z,1510154950.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:11.088Z,1510154951.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:11.111Z,1510154951.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:11.489Z,1510154951.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:11.504Z,1510154951.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:11.878Z,1510154951.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:11.910Z,1510154951.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:12.271Z,1510154952.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:12.302Z,1510154952.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:12.671Z,1510154952.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:12.702Z,1510154952.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:13.067Z,1510154953.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:13.102Z,1510154953.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:13.472Z,1510154953.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:13.505Z,1510154953.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:13.903Z,1510154953.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:13.918Z,1510154953.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:14.288Z,1510154954.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:14.305Z,1510154954.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:14.966Z,1510154954.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:14.998Z,1510154954.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:15.109Z,1510154955.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:15.157Z,1510154955.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:15.530Z,1510154955.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:15.559Z,1510154955.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:15.929Z,1510154955.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:15.977Z,1510154955.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:16.326Z,1510154956.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:16.358Z,1510154956.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:16.716Z,1510154956.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:16.747Z,1510154956.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:17.118Z,1510154957.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:17.134Z,1510154957.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:17.514Z,1510154957.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:17.530Z,1510154957.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:17.947Z,1510154957.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:17.963Z,1510154957.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:18.318Z,1510154958.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:18.334Z,1510154958.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:18.725Z,1510154958.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:18.753Z,1510154958.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:19.414Z,1510154959.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:19.435Z,1510154959.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:19.567Z,1510154959.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:19.606Z,1510154959.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:19.969Z,1510154959.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:19.991Z,1510154959.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:20.370Z,1510154960.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:20.386Z,1510154960.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:20.766Z,1510154960.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:20.782Z,1510154960.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:21.165Z,1510154961.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:21.181Z,1510154961.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:21.565Z,1510154961.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:21.582Z,1510154961.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:21.981Z,1510154961.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:22.010Z,1510154962.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:22.373Z,1510154962.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:22.412Z,1510154962.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:23.056Z,1510154963.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:23.072Z,1510154963.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:23.172Z,1510154963.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:23.223Z,1510154963.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:23.601Z,1510154963.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:23.617Z,1510154963.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:24.000Z,1510154964.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:24.017Z,1510154964.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:24.385Z,1510154964.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:24.415Z,1510154964.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:24.779Z,1510154964.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:24.804Z,1510154964.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:25.180Z,1510154965.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:25.196Z,1510154965.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:25.597Z,1510154965.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:25.630Z,1510154965.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:25.983Z,1510154965.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:25.999Z,1510154965.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:26.378Z,1510154966.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:26.395Z,1510154966.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:26.793Z,1510154966.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:26.847Z,1510154966.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:27.471Z,1510154967.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:27.487Z,1510154967.487 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:27.487Z,1510154967.487 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2017-11-08T15:29:27.487Z,1510154967.487 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T15:29:27.489Z,1510154967.489 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:27.489Z,1510154967.489 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42
2017-11-08T15:29:27.489Z,1510154967.489 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T15:29:27.491Z,1510154967.491 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:27.491Z,1510154967.491 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 42
2017-11-08T15:29:27.491Z,1510154967.491 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T15:29:27.570Z,1510154967.570 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T15:29:27.570Z,1510154967.570 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T15:29:27.570Z,1510154967.570 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T15:29:27.608Z,1510154967.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:27.739Z,1510154967.739 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T15:29:27.739Z,1510154967.739 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2017-11-08T15:29:27.739Z,1510154967.739 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T15:29:27.739Z,1510154967.739 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42
2017-11-08T15:29:27.740Z,1510154967.740 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T15:29:27.740Z,1510154967.740 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 42
2017-11-08T15:29:28.006Z,1510154968.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:28.079Z,1510154968.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T15:29:28.080Z,1510154968.080 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:29:28.085Z,1510154968.085 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:29:28.085Z,1510154968.085 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T15:29:28.086Z,1510154968.086 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:29:28.086Z,1510154968.086 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:29:28.086Z,1510154968.086 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T15:29:28.087Z,1510154968.087 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:29:28.087Z,1510154968.087 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:29:28.416Z,1510154968.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:28.439Z,1510154968.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2017-11-08T15:29:28.440Z,1510154968.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:28.815Z,1510154968.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:28.832Z,1510154968.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2017-11-08T15:29:28.833Z,1510154968.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:29.200Z,1510154969.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:29.259Z,1510154969.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2017-11-08T15:29:29.260Z,1510154969.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:29.625Z,1510154969.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:29.641Z,1510154969.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2017-11-08T15:29:29.642Z,1510154969.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:30.020Z,1510154970.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:30.075Z,1510154970.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2017-11-08T15:29:30.076Z,1510154970.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:30.694Z,1510154970.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:30.714Z,1510154970.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T15:29:30.715Z,1510154970.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:30.830Z,1510154970.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:30.881Z,1510154970.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2017-11-08T15:29:30.882Z,1510154970.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:31.256Z,1510154971.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:31.272Z,1510154971.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2017-11-08T15:29:31.273Z,1510154971.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:31.656Z,1510154971.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:31.676Z,1510154971.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2017-11-08T15:29:31.677Z,1510154971.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:32.045Z,1510154972.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:32.075Z,1510154972.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2017-11-08T15:29:32.076Z,1510154972.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:32.436Z,1510154972.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:32.471Z,1510154972.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2017-11-08T15:29:32.472Z,1510154972.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:32.835Z,1510154972.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:32.870Z,1510154972.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2017-11-08T15:29:32.871Z,1510154972.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:33.239Z,1510154973.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:33.278Z,1510154973.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2017-11-08T15:29:33.279Z,1510154973.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:33.671Z,1510154973.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:33.691Z,1510154973.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-11-08T15:29:33.692Z,1510154973.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:34.035Z,1510154974.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:34.075Z,1510154974.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-08T15:29:34.076Z,1510154974.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:34.445Z,1510154974.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:34.478Z,1510154974.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2017-11-08T15:29:34.479Z,1510154974.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:35.130Z,1510154975.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:35.151Z,1510154975.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T15:29:35.152Z,1510154975.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:35.285Z,1510154975.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:35.301Z,1510154975.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2017-11-08T15:29:35.302Z,1510154975.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:35.693Z,1510154975.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:35.725Z,1510154975.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2017-11-08T15:29:35.725Z,1510154975.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:36.087Z,1510154976.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:36.124Z,1510154976.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2017-11-08T15:29:36.125Z,1510154976.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:36.490Z,1510154976.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:36.522Z,1510154976.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2017-11-08T15:29:36.523Z,1510154976.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:36.881Z,1510154976.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:36.896Z,1510154976.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2017-11-08T15:29:36.897Z,1510154976.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:37.282Z,1510154977.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:37.297Z,1510154977.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2017-11-08T15:29:37.298Z,1510154977.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:37.701Z,1510154977.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:37.726Z,1510154977.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2017-11-08T15:29:37.727Z,1510154977.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:38.090Z,1510154978.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:38.131Z,1510154978.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2017-11-08T15:29:38.132Z,1510154978.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:39.190Z,1510154979.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:39.206Z,1510154979.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T15:29:39.207Z,1510154979.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:39.339Z,1510154979.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:39.355Z,1510154979.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2017-11-08T15:29:39.377Z,1510154979.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:39.758Z,1510154979.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:39.788Z,1510154979.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2017-11-08T15:29:39.789Z,1510154979.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:40.157Z,1510154980.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:40.182Z,1510154980.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2017-11-08T15:29:40.183Z,1510154980.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:40.553Z,1510154980.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:40.588Z,1510154980.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2017-11-08T15:29:40.589Z,1510154980.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:40.944Z,1510154980.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:40.959Z,1510154980.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2017-11-08T15:29:40.960Z,1510154980.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:41.344Z,1510154981.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:41.359Z,1510154981.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2017-11-08T15:29:41.360Z,1510154981.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:41.773Z,1510154981.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:41.790Z,1510154981.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2017-11-08T15:29:41.791Z,1510154981.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:42.144Z,1510154982.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:42.177Z,1510154982.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2017-11-08T15:29:42.178Z,1510154982.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:42.557Z,1510154982.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:42.574Z,1510154982.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2017-11-08T15:29:42.575Z,1510154982.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:43.218Z,1510154983.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:43.239Z,1510154983.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-08T15:29:43.240Z,1510154983.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:43.352Z,1510154983.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:43.376Z,1510154983.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2017-11-08T15:29:43.393Z,1510154983.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:43.766Z,1510154983.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:43.800Z,1510154983.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2017-11-08T15:29:43.801Z,1510154983.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:44.165Z,1510154984.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:44.198Z,1510154984.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2017-11-08T15:29:44.199Z,1510154984.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:44.566Z,1510154984.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:44.587Z,1510154984.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2017-11-08T15:29:44.588Z,1510154984.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:44.961Z,1510154984.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:44.977Z,1510154984.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2017-11-08T15:29:44.978Z,1510154984.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:45.358Z,1510154985.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:45.375Z,1510154985.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2017-11-08T15:29:45.376Z,1510154985.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:45.778Z,1510154985.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:45.810Z,1510154985.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2017-11-08T15:29:45.811Z,1510154985.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:46.170Z,1510154986.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:46.191Z,1510154986.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2017-11-08T15:29:46.192Z,1510154986.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:46.842Z,1510154986.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:46.875Z,1510154986.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-08T15:29:46.876Z,1510154986.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:46.983Z,1510154986.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:47.023Z,1510154987.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2017-11-08T15:29:47.024Z,1510154987.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:47.407Z,1510154987.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:47.424Z,1510154987.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2017-11-08T15:29:47.425Z,1510154987.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:47.793Z,1510154987.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:47.828Z,1510154987.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:48.204Z,1510154988.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:48.220Z,1510154988.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:48.583Z,1510154988.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:48.616Z,1510154988.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:48.983Z,1510154988.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:49.025Z,1510154989.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:49.389Z,1510154989.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:49.421Z,1510154989.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:49.820Z,1510154989.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:49.836Z,1510154989.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:50.184Z,1510154990.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:50.200Z,1510154990.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:50.597Z,1510154990.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:50.652Z,1510154990.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:51.264Z,1510154991.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:51.285Z,1510154991.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:51.397Z,1510154991.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:51.448Z,1510154991.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:51.825Z,1510154991.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:51.841Z,1510154991.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:52.224Z,1510154992.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:52.282Z,1510154992.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:52.613Z,1510154992.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:52.640Z,1510154992.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:53.003Z,1510154993.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:53.055Z,1510154993.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:53.404Z,1510154993.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:53.437Z,1510154993.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:53.832Z,1510154993.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:53.849Z,1510154993.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:54.216Z,1510154994.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:54.250Z,1510154994.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:54.883Z,1510154994.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:54.899Z,1510154994.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:54.997Z,1510154994.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:55.043Z,1510154995.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:55.414Z,1510154995.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:55.446Z,1510154995.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:55.825Z,1510154995.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:55.841Z,1510154995.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:56.213Z,1510154996.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:56.230Z,1510154996.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:56.606Z,1510154996.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:56.623Z,1510154996.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:57.006Z,1510154997.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:57.023Z,1510154997.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:57.406Z,1510154997.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:57.422Z,1510154997.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:57.830Z,1510154997.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:57.859Z,1510154997.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:58.204Z,1510154998.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:58.221Z,1510154998.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:58.617Z,1510154998.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:58.649Z,1510154998.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:59.298Z,1510154999.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:59.314Z,1510154999.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:59.423Z,1510154999.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:59.463Z,1510154999.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:29:59.842Z,1510154999.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:29:59.864Z,1510154999.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:00.234Z,1510155000.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:00.264Z,1510155000.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:00.634Z,1510155000.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:00.664Z,1510155000.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:01.023Z,1510155001.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:01.048Z,1510155001.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:01.424Z,1510155001.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:01.476Z,1510155001.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:01.851Z,1510155001.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:01.867Z,1510155001.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:02.253Z,1510155002.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:02.283Z,1510155002.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:02.913Z,1510155002.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:02.929Z,1510155002.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:03.035Z,1510155003.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:03.071Z,1510155003.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:03.456Z,1510155003.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:03.473Z,1510155003.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:03.856Z,1510155003.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:03.872Z,1510155003.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:04.252Z,1510155004.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:04.268Z,1510155004.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:04.636Z,1510155004.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:04.670Z,1510155004.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:05.035Z,1510155005.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:05.065Z,1510155005.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:05.436Z,1510155005.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:05.472Z,1510155005.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:05.867Z,1510155005.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:05.883Z,1510155005.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:06.235Z,1510155006.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:06.266Z,1510155006.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:06.654Z,1510155006.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:06.676Z,1510155006.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:07.313Z,1510155007.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:07.382Z,1510155007.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:07.481Z,1510155007.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:07.519Z,1510155007.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:07.903Z,1510155007.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:07.919Z,1510155007.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:08.308Z,1510155008.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:08.323Z,1510155008.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:08.704Z,1510155008.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:08.720Z,1510155008.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:09.087Z,1510155009.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:09.119Z,1510155009.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:09.484Z,1510155009.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:09.518Z,1510155009.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:09.915Z,1510155009.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:09.932Z,1510155009.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:10.308Z,1510155010.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:10.324Z,1510155010.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:10.962Z,1510155010.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:10.980Z,1510155010.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:11.083Z,1510155011.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:11.118Z,1510155011.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:11.507Z,1510155011.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:11.524Z,1510155011.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:11.907Z,1510155011.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:11.923Z,1510155011.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:12.308Z,1510155012.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:12.324Z,1510155012.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:12.683Z,1510155012.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:12.713Z,1510155012.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:13.087Z,1510155013.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:13.112Z,1510155013.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:13.488Z,1510155013.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:13.539Z,1510155013.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:13.915Z,1510155013.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:13.939Z,1510155013.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:14.283Z,1510155014.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:14.315Z,1510155014.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:14.708Z,1510155014.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:14.763Z,1510155014.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:15.416Z,1510155015.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:15.434Z,1510155015.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:15.533Z,1510155015.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:15.595Z,1510155015.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:15.960Z,1510155015.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:15.976Z,1510155015.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:16.359Z,1510155016.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:16.375Z,1510155016.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:16.760Z,1510155016.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:16.776Z,1510155016.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:17.139Z,1510155017.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:17.174Z,1510155017.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:17.540Z,1510155017.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:17.569Z,1510155017.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:17.971Z,1510155017.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:17.987Z,1510155017.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:18.359Z,1510155018.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:18.375Z,1510155018.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:19.021Z,1510155019.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:19.037Z,1510155019.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:19.168Z,1510155019.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:19.199Z,1510155019.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:19.574Z,1510155019.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:19.590Z,1510155019.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:19.978Z,1510155019.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:19.994Z,1510155019.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:20.373Z,1510155020.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:20.389Z,1510155020.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:20.768Z,1510155020.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:20.784Z,1510155020.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:21.168Z,1510155021.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:21.184Z,1510155021.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:21.570Z,1510155021.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:21.586Z,1510155021.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:21.986Z,1510155021.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:22.018Z,1510155022.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:22.369Z,1510155022.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:22.391Z,1510155022.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:22.775Z,1510155022.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:22.791Z,1510155022.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:23.457Z,1510155023.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:23.472Z,1510155023.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:23.591Z,1510155023.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:23.663Z,1510155023.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:24.013Z,1510155024.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:24.029Z,1510155024.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:24.412Z,1510155024.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:24.429Z,1510155024.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:24.798Z,1510155024.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:24.831Z,1510155024.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:25.192Z,1510155025.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:25.229Z,1510155025.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:25.619Z,1510155025.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:25.635Z,1510155025.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:26.005Z,1510155026.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:26.039Z,1510155026.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:26.678Z,1510155026.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:26.694Z,1510155026.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:26.801Z,1510155026.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:26.831Z,1510155026.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:27.254Z,1510155027.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:27.275Z,1510155027.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:27.628Z,1510155027.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:27.651Z,1510155027.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:28.019Z,1510155028.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:28.036Z,1510155028.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:28.407Z,1510155028.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:28.432Z,1510155028.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:28.807Z,1510155028.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:28.833Z,1510155028.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:29.208Z,1510155029.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:29.234Z,1510155029.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:29.630Z,1510155029.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:29.651Z,1510155029.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:30.007Z,1510155030.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:30.034Z,1510155030.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:30.433Z,1510155030.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:30.455Z,1510155030.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:31.102Z,1510155031.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:31.124Z,1510155031.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:31.236Z,1510155031.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:31.268Z,1510155031.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:31.656Z,1510155031.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:31.681Z,1510155031.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:32.054Z,1510155032.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:32.089Z,1510155032.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:32.449Z,1510155032.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:32.478Z,1510155032.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:32.844Z,1510155032.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:32.864Z,1510155032.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:33.241Z,1510155033.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:33.261Z,1510155033.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:33.664Z,1510155033.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:33.691Z,1510155033.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:34.049Z,1510155034.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:34.082Z,1510155034.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:34.732Z,1510155034.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:34.748Z,1510155034.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:34.852Z,1510155034.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:34.877Z,1510155034.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:35.270Z,1510155035.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:35.300Z,1510155035.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:35.667Z,1510155035.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:35.752Z,1510155035.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:36.071Z,1510155036.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:36.098Z,1510155036.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:36.456Z,1510155036.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:36.515Z,1510155036.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:36.857Z,1510155036.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:36.902Z,1510155036.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:37.253Z,1510155037.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:37.297Z,1510155037.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:37.687Z,1510155037.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:37.704Z,1510155037.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:38.055Z,1510155038.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:38.072Z,1510155038.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:38.466Z,1510155038.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:38.508Z,1510155038.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:39.143Z,1510155039.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:39.149Z,1510155039.149 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-08T15:30:39.169Z,1510155039.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:39.308Z,1510155039.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:39.324Z,1510155039.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:39.737Z,1510155039.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:39.753Z,1510155039.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:40.141Z,1510155040.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:40.157Z,1510155040.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:40.536Z,1510155040.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:40.552Z,1510155040.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:40.916Z,1510155040.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:40.948Z,1510155040.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:41.313Z,1510155041.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:41.329Z,1510155041.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:41.742Z,1510155041.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:41.762Z,1510155041.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:42.130Z,1510155042.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:42.152Z,1510155042.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:42.803Z,1510155042.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:42.819Z,1510155042.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:42.929Z,1510155042.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:42.962Z,1510155042.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:43.346Z,1510155043.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:43.362Z,1510155043.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:43.746Z,1510155043.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:43.766Z,1510155043.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:44.131Z,1510155044.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:44.172Z,1510155044.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:44.525Z,1510155044.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:44.570Z,1510155044.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:44.924Z,1510155044.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:44.960Z,1510155044.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:45.323Z,1510155045.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:45.372Z,1510155045.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:45.759Z,1510155045.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:45.776Z,1510155045.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:46.123Z,1510155046.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:46.168Z,1510155046.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:46.538Z,1510155046.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:46.577Z,1510155046.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:47.257Z,1510155047.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:47.275Z,1510155047.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:47.383Z,1510155047.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:47.431Z,1510155047.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:47.806Z,1510155047.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:47.828Z,1510155047.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:48.210Z,1510155048.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:48.226Z,1510155048.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:48.611Z,1510155048.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:48.627Z,1510155048.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:48.989Z,1510155048.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:49.022Z,1510155049.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:49.390Z,1510155049.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:49.431Z,1510155049.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:49.815Z,1510155049.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:49.846Z,1510155049.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:50.203Z,1510155050.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:50.236Z,1510155050.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:50.868Z,1510155050.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:50.884Z,1510155050.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:50.986Z,1510155050.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:51.037Z,1510155051.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:51.415Z,1510155051.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:51.432Z,1510155051.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:51.819Z,1510155051.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:51.835Z,1510155051.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:52.214Z,1510155052.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:52.263Z,1510155052.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:52.595Z,1510155052.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:52.629Z,1510155052.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:52.995Z,1510155052.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:53.030Z,1510155053.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:53.388Z,1510155053.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:53.421Z,1510155053.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:53.826Z,1510155053.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:53.897Z,1510155053.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:54.188Z,1510155054.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:54.212Z,1510155054.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:54.602Z,1510155054.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:54.624Z,1510155054.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:55.462Z,1510155055.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:55.491Z,1510155055.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:55.603Z,1510155055.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:55.655Z,1510155055.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:56.018Z,1510155056.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:56.050Z,1510155056.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:56.418Z,1510155056.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:56.448Z,1510155056.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:56.817Z,1510155056.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:56.848Z,1510155056.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:57.200Z,1510155057.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:57.275Z,1510155057.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:57.632Z,1510155057.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:57.649Z,1510155057.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:58.017Z,1510155058.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:58.051Z,1510155058.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:58.692Z,1510155058.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:58.748Z,1510155058.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:58.861Z,1510155058.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:58.901Z,1510155058.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:59.286Z,1510155059.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:59.338Z,1510155059.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:30:59.671Z,1510155059.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:30:59.697Z,1510155059.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:00.075Z,1510155060.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:00.103Z,1510155060.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:00.461Z,1510155060.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:00.501Z,1510155060.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:00.855Z,1510155060.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:00.899Z,1510155060.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:01.260Z,1510155061.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:01.300Z,1510155061.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:01.692Z,1510155061.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:01.708Z,1510155061.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:02.057Z,1510155062.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:02.074Z,1510155062.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:02.474Z,1510155062.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:02.502Z,1510155062.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:03.146Z,1510155063.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:03.162Z,1510155063.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:03.265Z,1510155063.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:03.299Z,1510155063.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:03.692Z,1510155063.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:03.708Z,1510155063.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:04.091Z,1510155064.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:04.107Z,1510155064.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:04.485Z,1510155064.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:04.502Z,1510155064.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:04.874Z,1510155064.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:04.904Z,1510155064.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:05.270Z,1510155065.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:05.295Z,1510155065.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:05.695Z,1510155065.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:05.722Z,1510155065.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:06.092Z,1510155066.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:06.108Z,1510155066.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:06.748Z,1510155066.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:06.765Z,1510155066.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:06.869Z,1510155066.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:06.901Z,1510155066.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:07.290Z,1510155067.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:07.306Z,1510155067.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:07.693Z,1510155067.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:07.745Z,1510155067.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:08.092Z,1510155068.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:08.108Z,1510155068.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:08.475Z,1510155068.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:08.500Z,1510155068.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:08.871Z,1510155068.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:08.901Z,1510155068.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:09.274Z,1510155069.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:09.290Z,1510155069.290 [PNI_TCM](ERROR): CRC does not match. Expected:0x9375 got:0x7361
2017-11-08T15:31:09.315Z,1510155069.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:09.702Z,1510155069.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:09.718Z,1510155069.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:10.072Z,1510155070.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:10.102Z,1510155070.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:10.494Z,1510155070.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:10.510Z,1510155070.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:11.162Z,1510155071.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:11.178Z,1510155071.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:11.310Z,1510155071.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:11.326Z,1510155071.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:11.726Z,1510155071.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:11.758Z,1510155071.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:12.129Z,1510155072.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:12.156Z,1510155072.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:12.529Z,1510155072.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:12.557Z,1510155072.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:12.915Z,1510155072.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:12.932Z,1510155072.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:13.316Z,1510155073.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:13.332Z,1510155073.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:13.751Z,1510155073.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:13.768Z,1510155073.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:14.129Z,1510155074.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:14.153Z,1510155074.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:14.799Z,1510155074.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:14.814Z,1510155074.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:14.926Z,1510155074.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:14.955Z,1510155074.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:15.338Z,1510155075.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:15.368Z,1510155075.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:15.738Z,1510155075.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:15.768Z,1510155075.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:16.137Z,1510155076.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:16.163Z,1510155076.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:16.531Z,1510155076.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:16.564Z,1510155076.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:16.923Z,1510155076.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:16.944Z,1510155076.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:17.328Z,1510155077.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:17.375Z,1510155077.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:17.756Z,1510155077.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:17.773Z,1510155077.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:18.123Z,1510155078.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:18.144Z,1510155078.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:18.537Z,1510155078.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:18.573Z,1510155078.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:19.212Z,1510155079.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:19.235Z,1510155079.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:19.343Z,1510155079.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:19.379Z,1510155079.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:19.764Z,1510155079.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:19.839Z,1510155079.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:20.164Z,1510155080.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:20.227Z,1510155080.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:20.554Z,1510155080.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:20.583Z,1510155080.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:20.943Z,1510155080.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:20.991Z,1510155080.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:21.344Z,1510155081.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:21.377Z,1510155081.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:21.772Z,1510155081.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:21.829Z,1510155081.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:22.157Z,1510155082.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:22.191Z,1510155082.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:22.833Z,1510155082.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:22.854Z,1510155082.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:22.995Z,1510155082.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:23.035Z,1510155083.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:23.414Z,1510155083.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:23.443Z,1510155083.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:23.813Z,1510155083.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:23.843Z,1510155083.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:24.206Z,1510155084.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:24.238Z,1510155084.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:24.599Z,1510155084.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:24.616Z,1510155084.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:24.999Z,1510155084.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:25.019Z,1510155085.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:25.401Z,1510155085.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:25.423Z,1510155085.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:25.834Z,1510155085.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:25.850Z,1510155085.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:26.205Z,1510155086.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:26.221Z,1510155086.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:26.617Z,1510155086.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:26.643Z,1510155086.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:27.321Z,1510155087.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:27.342Z,1510155087.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:27.457Z,1510155087.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:27.507Z,1510155087.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:27.874Z,1510155087.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:27.906Z,1510155087.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:28.273Z,1510155088.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:28.298Z,1510155088.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:28.683Z,1510155088.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:28.700Z,1510155088.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:29.063Z,1510155089.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:29.088Z,1510155089.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:29.460Z,1510155089.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:29.476Z,1510155089.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:29.892Z,1510155089.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:29.949Z,1510155089.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:30.277Z,1510155090.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:30.310Z,1510155090.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:30.939Z,1510155090.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:30.955Z,1510155090.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:31.058Z,1510155091.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:31.110Z,1510155091.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:31.474Z,1510155091.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:31.500Z,1510155091.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:31.877Z,1510155091.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:31.902Z,1510155091.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:32.274Z,1510155092.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:32.299Z,1510155092.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:32.663Z,1510155092.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:32.679Z,1510155092.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:33.059Z,1510155093.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:33.075Z,1510155093.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:33.464Z,1510155093.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:33.508Z,1510155093.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:33.892Z,1510155093.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:33.908Z,1510155093.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:34.267Z,1510155094.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:34.283Z,1510155094.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:34.673Z,1510155094.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:34.712Z,1510155094.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:35.354Z,1510155095.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:35.376Z,1510155095.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:35.512Z,1510155095.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:35.555Z,1510155095.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:35.926Z,1510155095.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:35.950Z,1510155095.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:36.325Z,1510155096.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:36.351Z,1510155096.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:36.729Z,1510155096.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:36.754Z,1510155096.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:37.114Z,1510155097.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:37.147Z,1510155097.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:37.516Z,1510155097.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:37.532Z,1510155097.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:37.933Z,1510155097.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:37.957Z,1510155097.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:38.329Z,1510155098.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:38.360Z,1510155098.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:39.034Z,1510155099.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:39.056Z,1510155099.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:39.168Z,1510155099.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:39.210Z,1510155099.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:39.586Z,1510155099.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:39.611Z,1510155099.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:39.986Z,1510155099.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:40.011Z,1510155100.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:40.385Z,1510155100.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:40.420Z,1510155100.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:40.771Z,1510155100.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:40.788Z,1510155100.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:41.168Z,1510155101.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:41.184Z,1510155101.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:41.568Z,1510155101.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:41.585Z,1510155101.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:42.003Z,1510155102.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:42.072Z,1510155102.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:42.371Z,1510155102.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:42.388Z,1510155102.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:42.781Z,1510155102.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:42.828Z,1510155102.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:43.459Z,1510155103.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:43.475Z,1510155103.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:43.583Z,1510155103.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:43.639Z,1510155103.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:44.004Z,1510155104.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:44.020Z,1510155104.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:44.400Z,1510155104.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:44.416Z,1510155104.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:44.790Z,1510155104.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:44.822Z,1510155104.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:45.184Z,1510155105.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:45.216Z,1510155105.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:45.611Z,1510155105.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:45.631Z,1510155105.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:45.989Z,1510155105.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:46.019Z,1510155106.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:46.670Z,1510155106.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:46.685Z,1510155106.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:46.821Z,1510155106.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:46.867Z,1510155106.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:47.238Z,1510155107.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:47.263Z,1510155107.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:47.637Z,1510155107.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:47.666Z,1510155107.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:48.030Z,1510155108.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:48.063Z,1510155108.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:48.423Z,1510155108.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:48.444Z,1510155108.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:48.823Z,1510155108.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:48.838Z,1510155108.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:49.225Z,1510155109.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:49.241Z,1510155109.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:49.655Z,1510155109.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:49.675Z,1510155109.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:50.024Z,1510155110.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:50.063Z,1510155110.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:50.429Z,1510155110.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:50.445Z,1510155110.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:51.115Z,1510155111.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:51.135Z,1510155111.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:51.233Z,1510155111.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:51.287Z,1510155111.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:51.656Z,1510155111.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:51.725Z,1510155111.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:52.053Z,1510155112.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:52.095Z,1510155112.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:52.452Z,1510155112.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:52.483Z,1510155112.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:52.844Z,1510155112.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:52.881Z,1510155112.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:53.240Z,1510155113.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:53.277Z,1510155113.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:53.672Z,1510155113.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:53.692Z,1510155113.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:54.057Z,1510155114.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:54.086Z,1510155114.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:54.733Z,1510155114.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:54.749Z,1510155114.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:54.752Z,1510155114.752 [Default:CheckIn:Read_Iridium](INFO): Timed out from 2017-11-08T13:31:54.6Z
2017-11-08T15:31:54.753Z,1510155114.753 [Default:CheckIn:Read_Iridium:A_Timeout] Running Loop=1
2017-11-08T15:31:54.753Z,1510155114.753 [Default:CheckIn:Read_Iridium:A_Timeout](DEBUG): Aggregate::initialize Default:CheckIn:Read_Iridium:A_Timeout
2017-11-08T15:31:54.753Z,1510155114.753 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute] Running Loop=1
2017-11-08T15:31:54.753Z,1510155114.753 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](INFO): Executing command Burn 300
2017-11-08T15:31:54.759Z,1510155114.759 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute] Stopped
2017-11-08T15:31:54.759Z,1510155114.759 [Default:CheckIn:Read_Iridium:A_Timeout:B] Running Loop=1
2017-11-08T15:31:54.774Z,1510155114.774 [CommandLine](IMPORTANT): got command burn 300.000000
2017-11-08T15:31:54.897Z,1510155114.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:54.913Z,1510155114.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:54.916Z,1510155114.916 [Default:CheckIn:Read_Iridium:A_Timeout:B](CRITICAL): Dropped weight due to communications timeout.
2017-11-08T15:31:54.918Z,1510155114.918 [Default:CheckIn:Read_Iridium:A_Timeout:B] Stopped
2017-11-08T15:31:54.918Z,1510155114.918 [Default:CheckIn:Read_Iridium:A_Timeout](INFO): Completed Default:CheckIn:Read_Iridium:A_Timeout
2017-11-08T15:31:54.918Z,1510155114.918 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T15:31:54.918Z,1510155114.918 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T15:31:54.918Z,1510155114.918 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T15:31:55.003Z,1510155115.003 [CBIT](INFO): Critical error at 20171108T153154
2017-11-08T15:31:55.314Z,1510155115.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:55.346Z,1510155115.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:55.717Z,1510155115.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:55.744Z,1510155115.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:56.117Z,1510155116.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:56.145Z,1510155116.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:56.507Z,1510155116.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:56.547Z,1510155116.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:56.907Z,1510155116.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:56.923Z,1510155116.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:57.308Z,1510155117.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:57.324Z,1510155117.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:57.711Z,1510155117.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:57.728Z,1510155117.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:58.114Z,1510155118.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:58.130Z,1510155118.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:58.521Z,1510155118.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:58.553Z,1510155118.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:58.922Z,1510155118.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:58.954Z,1510155118.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:59.311Z,1510155119.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:59.327Z,1510155119.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:31:59.709Z,1510155119.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:31:59.725Z,1510155119.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:00.108Z,1510155120.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:00.126Z,1510155120.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:00.509Z,1510155120.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:00.525Z,1510155120.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:00.908Z,1510155120.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:00.925Z,1510155120.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:01.319Z,1510155121.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:01.358Z,1510155121.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:01.722Z,1510155121.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:01.753Z,1510155121.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:02.119Z,1510155122.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:02.156Z,1510155122.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:02.507Z,1510155122.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:02.524Z,1510155122.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:02.908Z,1510155122.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:02.925Z,1510155122.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:03.310Z,1510155123.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:03.328Z,1510155123.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:03.736Z,1510155123.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:03.840Z,1510155123.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:04.110Z,1510155124.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:04.135Z,1510155124.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:04.546Z,1510155124.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:04.661Z,1510155124.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:04.915Z,1510155124.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:04.975Z,1510155124.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:05.310Z,1510155125.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:05.326Z,1510155125.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:05.709Z,1510155125.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:05.759Z,1510155125.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:06.108Z,1510155126.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:06.124Z,1510155126.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:06.509Z,1510155126.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:06.525Z,1510155126.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:06.910Z,1510155126.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:06.926Z,1510155126.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:07.318Z,1510155127.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:07.334Z,1510155127.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:07.717Z,1510155127.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:07.733Z,1510155127.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:08.117Z,1510155128.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:08.134Z,1510155128.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:08.505Z,1510155128.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:08.522Z,1510155128.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:08.908Z,1510155128.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:08.923Z,1510155128.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:09.311Z,1510155129.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:09.327Z,1510155129.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:09.708Z,1510155129.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:09.724Z,1510155129.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:10.117Z,1510155130.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:10.134Z,1510155130.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:10.521Z,1510155130.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:10.553Z,1510155130.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:10.914Z,1510155130.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:10.935Z,1510155130.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:11.310Z,1510155131.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:11.325Z,1510155131.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:11.707Z,1510155131.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:11.723Z,1510155131.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:12.105Z,1510155132.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:12.121Z,1510155132.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:12.508Z,1510155132.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:12.528Z,1510155132.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:12.910Z,1510155132.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:12.926Z,1510155132.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:13.314Z,1510155133.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:13.330Z,1510155133.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:13.717Z,1510155133.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:13.733Z,1510155133.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:14.117Z,1510155134.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:14.163Z,1510155134.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:14.510Z,1510155134.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:14.526Z,1510155134.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:14.908Z,1510155134.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:14.924Z,1510155134.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:15.310Z,1510155135.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:15.326Z,1510155135.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:15.703Z,1510155135.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:15.724Z,1510155135.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:16.117Z,1510155136.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:16.133Z,1510155136.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:16.517Z,1510155136.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:16.534Z,1510155136.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:16.914Z,1510155136.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:16.935Z,1510155136.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:17.307Z,1510155137.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:17.333Z,1510155137.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:17.713Z,1510155137.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:17.729Z,1510155137.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:18.106Z,1510155138.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:18.122Z,1510155138.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:18.510Z,1510155138.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:18.525Z,1510155138.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:18.911Z,1510155138.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:18.927Z,1510155138.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:19.318Z,1510155139.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:19.334Z,1510155139.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:19.717Z,1510155139.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:19.733Z,1510155139.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:20.117Z,1510155140.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:20.134Z,1510155140.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:20.503Z,1510155140.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:20.524Z,1510155140.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:20.912Z,1510155140.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:20.928Z,1510155140.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:21.312Z,1510155141.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:21.328Z,1510155141.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:21.705Z,1510155141.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:21.722Z,1510155141.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:22.119Z,1510155142.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:22.135Z,1510155142.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:22.527Z,1510155142.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:22.544Z,1510155142.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:22.918Z,1510155142.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T15:32:22.939Z,1510155142.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:23.327Z,1510155143.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:23.728Z,1510155143.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:24.129Z,1510155144.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:24.529Z,1510155144.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:24.928Z,1510155144.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:25.339Z,1510155145.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:25.734Z,1510155145.734 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T15:32:25.734Z,1510155145.734 [BPC1] Data Fault, FailCount= 1
2017-11-08T15:32:25.734Z,1510155145.734 [BPC1](ERROR): Data Fault
2017-11-08T15:32:25.743Z,1510155145.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:25.837Z,1510155145.837 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T15:32:26.147Z,1510155146.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:26.522Z,1510155146.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:26.931Z,1510155146.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:27.017Z,1510155147.017 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T15:32:27.017Z,1510155147.017 [BPC1] No Fault, FailCount= 1
2017-11-08T15:32:27.387Z,1510155147.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:27.723Z,1510155147.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:28.135Z,1510155148.135 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:28.135Z,1510155148.135 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43
2017-11-08T15:32:28.135Z,1510155148.135 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T15:32:28.137Z,1510155148.137 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:28.137Z,1510155148.137 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43
2017-11-08T15:32:28.137Z,1510155148.137 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T15:32:28.139Z,1510155148.139 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:28.139Z,1510155148.139 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 43
2017-11-08T15:32:28.139Z,1510155148.139 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T15:32:28.221Z,1510155148.221 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T15:32:28.221Z,1510155148.221 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T15:32:28.222Z,1510155148.222 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T15:32:28.617Z,1510155148.617 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T15:32:28.617Z,1510155148.617 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43
2017-11-08T15:32:28.617Z,1510155148.617 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T15:32:28.617Z,1510155148.617 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43
2017-11-08T15:32:28.618Z,1510155148.618 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T15:32:28.618Z,1510155148.618 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 43
2017-11-08T15:32:28.938Z,1510155148.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T15:32:28.939Z,1510155148.939 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:32:28.939Z,1510155148.939 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:32:28.939Z,1510155148.939 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T15:32:28.940Z,1510155148.940 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:32:28.940Z,1510155148.940 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:32:28.940Z,1510155148.940 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T15:32:28.941Z,1510155148.941 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:32:28.941Z,1510155148.941 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:32:29.332Z,1510155149.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T15:32:29.333Z,1510155149.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:29.735Z,1510155149.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T15:32:29.741Z,1510155149.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:30.115Z,1510155150.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T15:32:30.116Z,1510155150.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:30.519Z,1510155150.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T15:32:30.520Z,1510155150.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:30.919Z,1510155150.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T15:32:30.920Z,1510155150.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:31.345Z,1510155151.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T15:32:31.346Z,1510155151.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:31.743Z,1510155151.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T15:32:31.744Z,1510155151.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:32.151Z,1510155152.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T15:32:32.152Z,1510155152.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:32.515Z,1510155152.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T15:32:32.516Z,1510155152.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:32.914Z,1510155152.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T15:32:32.915Z,1510155152.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:33.347Z,1510155153.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T15:32:33.348Z,1510155153.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:33.723Z,1510155153.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T15:32:33.724Z,1510155153.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:34.151Z,1510155154.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T15:32:34.152Z,1510155154.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:34.545Z,1510155154.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T15:32:34.546Z,1510155154.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:34.946Z,1510155154.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T15:32:34.947Z,1510155154.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:35.326Z,1510155155.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T15:32:35.327Z,1510155155.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:35.767Z,1510155155.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T15:32:35.768Z,1510155155.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:36.127Z,1510155156.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T15:32:36.128Z,1510155156.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:36.527Z,1510155156.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T15:32:36.528Z,1510155156.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:36.931Z,1510155156.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T15:32:36.932Z,1510155156.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:37.333Z,1510155157.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T15:32:37.334Z,1510155157.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:37.735Z,1510155157.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T15:32:37.736Z,1510155157.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:38.130Z,1510155158.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T15:32:38.131Z,1510155158.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:38.523Z,1510155158.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T15:32:38.524Z,1510155158.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:38.924Z,1510155158.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T15:32:38.925Z,1510155158.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:39.323Z,1510155159.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T15:32:39.325Z,1510155159.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:39.724Z,1510155159.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T15:32:39.725Z,1510155159.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:40.159Z,1510155160.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T15:32:40.160Z,1510155160.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:40.557Z,1510155160.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T15:32:40.558Z,1510155160.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:40.936Z,1510155160.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T15:32:40.953Z,1510155160.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:41.325Z,1510155161.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T15:32:41.326Z,1510155161.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:41.725Z,1510155161.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T15:32:41.726Z,1510155161.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:42.125Z,1510155162.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T15:32:42.126Z,1510155162.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:42.525Z,1510155162.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T15:32:42.526Z,1510155162.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:42.926Z,1510155162.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T15:32:42.927Z,1510155162.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:43.339Z,1510155163.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T15:32:43.340Z,1510155163.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:43.739Z,1510155163.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T15:32:43.740Z,1510155163.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:44.134Z,1510155164.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T15:32:44.135Z,1510155164.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:44.525Z,1510155164.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T15:32:44.526Z,1510155164.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:44.927Z,1510155164.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T15:32:44.928Z,1510155164.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:45.324Z,1510155165.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T15:32:45.325Z,1510155165.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:45.731Z,1510155165.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T15:32:45.732Z,1510155165.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:46.135Z,1510155166.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T15:32:46.136Z,1510155166.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:46.537Z,1510155166.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T15:32:46.538Z,1510155166.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:46.937Z,1510155166.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T15:32:46.938Z,1510155166.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:47.324Z,1510155167.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T15:32:47.325Z,1510155167.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:47.772Z,1510155167.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T15:32:47.777Z,1510155167.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:48.135Z,1510155168.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:48.530Z,1510155168.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:48.610Z,1510155168.610 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T15:32:48.971Z,1510155168.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:49.338Z,1510155169.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:49.770Z,1510155169.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:50.140Z,1510155170.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:50.525Z,1510155170.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:50.931Z,1510155170.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:51.332Z,1510155171.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:51.727Z,1510155171.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:52.140Z,1510155172.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:52.540Z,1510155172.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:52.939Z,1510155172.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:53.334Z,1510155173.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:53.723Z,1510155173.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:54.136Z,1510155174.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:54.536Z,1510155174.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:54.915Z,1510155174.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:55.339Z,1510155175.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:55.747Z,1510155175.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:56.146Z,1510155176.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:56.519Z,1510155176.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:56.918Z,1510155176.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:57.320Z,1510155177.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:57.744Z,1510155177.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:58.167Z,1510155178.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:58.549Z,1510155178.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:58.948Z,1510155178.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:59.323Z,1510155179.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:32:59.720Z,1510155179.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:00.124Z,1510155180.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:00.551Z,1510155180.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:00.919Z,1510155180.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:01.347Z,1510155181.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:01.751Z,1510155181.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:02.141Z,1510155182.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:02.531Z,1510155182.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:02.923Z,1510155182.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:03.323Z,1510155183.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:03.722Z,1510155183.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:04.150Z,1510155184.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:04.529Z,1510155184.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:04.950Z,1510155184.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:05.322Z,1510155185.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:05.726Z,1510155185.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:06.123Z,1510155186.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:06.527Z,1510155186.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:06.922Z,1510155186.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:07.354Z,1510155187.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:07.738Z,1510155187.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:08.133Z,1510155188.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:08.531Z,1510155188.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:08.925Z,1510155188.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:09.327Z,1510155189.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:09.725Z,1510155189.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:10.175Z,1510155190.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:10.587Z,1510155190.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:10.940Z,1510155190.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:11.332Z,1510155191.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:11.771Z,1510155191.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:12.127Z,1510155192.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:12.574Z,1510155192.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:12.923Z,1510155192.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:13.339Z,1510155193.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:13.779Z,1510155193.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:14.137Z,1510155194.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:14.527Z,1510155194.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:14.931Z,1510155194.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:15.337Z,1510155195.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:15.736Z,1510155195.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:16.140Z,1510155196.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:16.542Z,1510155196.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:16.944Z,1510155196.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:17.341Z,1510155197.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:17.737Z,1510155197.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:18.141Z,1510155198.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:18.522Z,1510155198.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:18.922Z,1510155198.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:19.348Z,1510155199.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:19.749Z,1510155199.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:20.153Z,1510155200.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:20.520Z,1510155200.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:20.963Z,1510155200.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:21.323Z,1510155201.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:21.748Z,1510155201.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:22.148Z,1510155202.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:22.542Z,1510155202.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:22.954Z,1510155202.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:23.331Z,1510155203.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:23.722Z,1510155203.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:24.121Z,1510155204.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:24.524Z,1510155204.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:24.925Z,1510155204.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:25.330Z,1510155205.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:25.733Z,1510155205.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:26.129Z,1510155206.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:26.531Z,1510155206.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:26.925Z,1510155206.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:27.322Z,1510155207.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:27.721Z,1510155207.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:28.154Z,1510155208.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:28.530Z,1510155208.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:28.930Z,1510155208.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:29.328Z,1510155209.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:29.728Z,1510155209.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:30.123Z,1510155210.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:30.525Z,1510155210.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:30.922Z,1510155210.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:31.334Z,1510155211.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:31.734Z,1510155211.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:32.130Z,1510155212.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:32.527Z,1510155212.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:32.999Z,1510155212.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:33.326Z,1510155213.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:33.763Z,1510155213.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:34.130Z,1510155214.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:34.563Z,1510155214.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:34.936Z,1510155214.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:35.325Z,1510155215.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:35.722Z,1510155215.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:36.131Z,1510155216.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:36.526Z,1510155216.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:36.922Z,1510155216.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:37.335Z,1510155217.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:37.737Z,1510155217.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:38.132Z,1510155218.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:38.533Z,1510155218.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:38.931Z,1510155218.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:39.326Z,1510155219.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:39.722Z,1510155219.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:40.132Z,1510155220.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:40.530Z,1510155220.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:40.934Z,1510155220.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:41.325Z,1510155221.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:41.726Z,1510155221.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:42.131Z,1510155222.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:42.529Z,1510155222.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:42.967Z,1510155222.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:43.335Z,1510155223.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:43.733Z,1510155223.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:44.133Z,1510155224.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:44.526Z,1510155224.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:44.925Z,1510155224.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:45.326Z,1510155225.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:45.731Z,1510155225.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:46.134Z,1510155226.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:46.533Z,1510155226.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:46.934Z,1510155226.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:47.335Z,1510155227.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:47.727Z,1510155227.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:48.131Z,1510155228.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:48.526Z,1510155228.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:48.926Z,1510155228.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:49.339Z,1510155229.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:49.734Z,1510155229.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:50.134Z,1510155230.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:50.531Z,1510155230.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:50.926Z,1510155230.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:51.332Z,1510155231.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:51.731Z,1510155231.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:52.134Z,1510155232.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:52.534Z,1510155232.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:52.934Z,1510155232.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:53.326Z,1510155233.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:53.727Z,1510155233.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:54.118Z,1510155234.118 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-08T15:33:54.118Z,1510155234.118 [BPC1] Data Fault, FailCount= 1
2017-11-08T15:33:54.118Z,1510155234.118 [BPC1](ERROR): Data Fault
2017-11-08T15:33:54.128Z,1510155234.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:54.205Z,1510155234.205 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T15:33:54.528Z,1510155234.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:54.926Z,1510155234.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:55.334Z,1510155235.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:55.409Z,1510155235.409 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T15:33:55.409Z,1510155235.409 [BPC1] No Fault, FailCount= 1
2017-11-08T15:33:55.783Z,1510155235.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:56.139Z,1510155236.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:56.525Z,1510155236.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:56.930Z,1510155236.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:57.325Z,1510155237.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:57.728Z,1510155237.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:58.133Z,1510155238.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:58.539Z,1510155238.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:58.940Z,1510155238.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:59.326Z,1510155239.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:33:59.726Z,1510155239.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:00.128Z,1510155240.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:00.526Z,1510155240.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:00.926Z,1510155240.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:01.334Z,1510155241.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:01.737Z,1510155241.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:02.133Z,1510155242.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:02.531Z,1510155242.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:02.924Z,1510155242.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:03.326Z,1510155243.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:03.727Z,1510155243.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:04.167Z,1510155244.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:04.533Z,1510155244.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:04.934Z,1510155244.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:05.324Z,1510155245.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:05.726Z,1510155245.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:06.131Z,1510155246.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:06.528Z,1510155246.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:06.923Z,1510155246.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:07.334Z,1510155247.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:07.739Z,1510155247.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:08.138Z,1510155248.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:08.526Z,1510155248.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:08.924Z,1510155248.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:09.326Z,1510155249.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:09.732Z,1510155249.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:10.139Z,1510155250.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:10.533Z,1510155250.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:10.934Z,1510155250.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:11.325Z,1510155251.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:11.726Z,1510155251.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:12.122Z,1510155252.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:12.525Z,1510155252.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:12.929Z,1510155252.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:13.334Z,1510155253.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:13.733Z,1510155253.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:14.133Z,1510155254.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:14.531Z,1510155254.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:14.926Z,1510155254.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:15.332Z,1510155255.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:15.763Z,1510155255.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:16.173Z,1510155256.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:16.539Z,1510155256.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:16.935Z,1510155256.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:17.370Z,1510155257.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:17.728Z,1510155257.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:18.169Z,1510155258.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:18.525Z,1510155258.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:18.926Z,1510155258.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:19.340Z,1510155259.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:19.743Z,1510155259.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:20.147Z,1510155260.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:20.522Z,1510155260.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:20.929Z,1510155260.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:21.328Z,1510155261.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:21.725Z,1510155261.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:22.134Z,1510155262.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:22.543Z,1510155262.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:22.936Z,1510155262.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:23.325Z,1510155263.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:23.726Z,1510155263.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:24.135Z,1510155264.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:24.527Z,1510155264.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:24.928Z,1510155264.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:25.335Z,1510155265.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:25.743Z,1510155265.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:26.139Z,1510155266.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:26.569Z,1510155266.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:26.924Z,1510155266.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:27.331Z,1510155267.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:27.723Z,1510155267.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:28.131Z,1510155268.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:28.486Z,1510155268.486 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T15:34:28.487Z,1510155268.487 [NAL9602] Data Fault, FailCount= 3
2017-11-08T15:34:28.487Z,1510155268.487 [NAL9602](ERROR): Data Fault
2017-11-08T15:34:28.552Z,1510155268.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:28.641Z,1510155268.641 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T15:34:28.886Z,1510155268.886 [NAL9602](INFO): Powering down
2017-11-08T15:34:28.935Z,1510155268.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:29.322Z,1510155269.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:29.726Z,1510155269.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:29.804Z,1510155269.804 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T15:34:29.804Z,1510155269.804 [NAL9602] No Fault, FailCount= 3
2017-11-08T15:34:30.123Z,1510155270.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:30.528Z,1510155270.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:30.931Z,1510155270.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:31.321Z,1510155271.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:31.725Z,1510155271.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:32.129Z,1510155272.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:32.525Z,1510155272.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:32.923Z,1510155272.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:33.331Z,1510155273.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:33.730Z,1510155273.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:34.125Z,1510155274.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:34.536Z,1510155274.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:34.927Z,1510155274.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:35.332Z,1510155275.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:35.731Z,1510155275.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:36.149Z,1510155276.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:36.516Z,1510155276.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:36.945Z,1510155276.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:37.324Z,1510155277.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:37.720Z,1510155277.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:38.124Z,1510155278.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:38.572Z,1510155278.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:38.957Z,1510155278.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:39.322Z,1510155279.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:39.721Z,1510155279.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:40.157Z,1510155280.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:40.522Z,1510155280.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:40.952Z,1510155280.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:41.325Z,1510155281.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:41.725Z,1510155281.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:42.123Z,1510155282.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:42.524Z,1510155282.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:42.921Z,1510155282.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:43.325Z,1510155283.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:43.724Z,1510155283.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:44.121Z,1510155284.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:44.523Z,1510155284.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:44.924Z,1510155284.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:45.324Z,1510155285.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:45.723Z,1510155285.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:46.124Z,1510155286.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:46.201Z,1510155286.201 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:34:46.201Z,1510155286.201 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T15:34:46.225Z,1510155286.225 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:34:46.226Z,1510155286.226 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:34:46.226Z,1510155286.226 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:34:46.226Z,1510155286.226 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T15:34:46.226Z,1510155286.226 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:34:46.524Z,1510155286.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:46.601Z,1510155286.601 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:34:46.629Z,1510155286.629 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:34:46.727Z,1510155286.727 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:34:46.933Z,1510155286.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:47.324Z,1510155287.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:47.721Z,1510155287.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:48.125Z,1510155288.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:48.210Z,1510155288.210 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:34:48.210Z,1510155288.210 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T15:34:48.341Z,1510155288.341 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:34:48.341Z,1510155288.341 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:34:48.341Z,1510155288.341 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:34:48.342Z,1510155288.342 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T15:34:48.342Z,1510155288.342 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:34:48.524Z,1510155288.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:48.601Z,1510155288.601 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:34:48.745Z,1510155288.745 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:34:48.824Z,1510155288.824 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:34:48.927Z,1510155288.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:49.355Z,1510155289.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:49.724Z,1510155289.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:50.126Z,1510155290.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:50.221Z,1510155290.221 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:34:50.221Z,1510155290.221 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T15:34:50.441Z,1510155290.441 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:34:50.441Z,1510155290.441 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:34:50.441Z,1510155290.441 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:34:50.442Z,1510155290.442 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T15:34:50.442Z,1510155290.442 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:34:50.553Z,1510155290.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:50.633Z,1510155290.633 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:34:50.845Z,1510155290.845 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:34:50.976Z,1510155290.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:51.018Z,1510155291.018 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:34:51.329Z,1510155291.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:51.731Z,1510155291.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:52.124Z,1510155292.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:52.525Z,1510155292.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:52.605Z,1510155292.605 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:34:52.605Z,1510155292.605 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T15:34:52.633Z,1510155292.633 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:34:52.633Z,1510155292.633 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:34:52.633Z,1510155292.633 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:34:52.634Z,1510155292.634 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T15:34:52.634Z,1510155292.634 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:34:52.931Z,1510155292.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:53.013Z,1510155293.013 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:34:53.037Z,1510155293.037 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:34:53.135Z,1510155293.135 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:34:53.333Z,1510155293.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:53.725Z,1510155293.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:54.128Z,1510155294.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:54.524Z,1510155294.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:54.602Z,1510155294.602 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:34:54.602Z,1510155294.602 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T15:34:54.749Z,1510155294.749 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:34:54.749Z,1510155294.749 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:34:54.749Z,1510155294.749 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:34:54.749Z,1510155294.749 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T15:34:54.750Z,1510155294.750 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:34:54.922Z,1510155294.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:55.000Z,1510155295.000 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:34:55.001Z,1510155295.001 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:34:55.153Z,1510155295.153 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:34:55.236Z,1510155295.236 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:34:55.337Z,1510155295.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:55.724Z,1510155295.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:56.124Z,1510155296.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:56.536Z,1510155296.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:56.925Z,1510155296.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:57.325Z,1510155297.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:57.736Z,1510155297.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:58.125Z,1510155298.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:58.525Z,1510155298.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:58.925Z,1510155298.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:59.290Z,1510155299.290 [NAL9602](INFO): Powering up NAL9602
2017-11-08T15:34:59.334Z,1510155299.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:34:59.726Z,1510155299.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:00.132Z,1510155300.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:00.524Z,1510155300.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:00.925Z,1510155300.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:01.332Z,1510155301.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:01.744Z,1510155301.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:02.123Z,1510155302.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:02.536Z,1510155302.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:02.925Z,1510155302.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:03.322Z,1510155303.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:03.726Z,1510155303.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:04.124Z,1510155304.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:04.517Z,1510155304.517 [BPC1](ERROR): Failed to receive battery data
2017-11-08T15:35:04.517Z,1510155304.517 [BPC1] Communications Fault, FailCount= 1
2017-11-08T15:35:04.517Z,1510155304.517 [BPC1](ERROR): Communications Fault
2017-11-08T15:35:04.530Z,1510155304.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:04.613Z,1510155304.613 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T15:35:04.934Z,1510155304.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:05.325Z,1510155305.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:05.724Z,1510155305.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:05.809Z,1510155305.809 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T15:35:05.809Z,1510155305.809 [BPC1] No Fault, FailCount= 1
2017-11-08T15:35:06.183Z,1510155306.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:06.532Z,1510155306.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:06.937Z,1510155306.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:07.332Z,1510155307.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:07.739Z,1510155307.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:08.130Z,1510155308.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:08.540Z,1510155308.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:08.922Z,1510155308.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:09.319Z,1510155309.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:09.719Z,1510155309.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:10.144Z,1510155310.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:10.490Z,1510155310.490 [NAL9602](INFO): NAL9602 initialized
2017-11-08T15:35:10.524Z,1510155310.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:10.928Z,1510155310.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:11.350Z,1510155311.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:11.746Z,1510155311.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:12.129Z,1510155312.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:12.526Z,1510155312.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:12.928Z,1510155312.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:13.334Z,1510155313.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:13.738Z,1510155313.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:14.124Z,1510155314.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:14.559Z,1510155314.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:14.938Z,1510155314.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:15.333Z,1510155315.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:15.730Z,1510155315.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:16.131Z,1510155316.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:16.523Z,1510155316.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:16.935Z,1510155316.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:17.338Z,1510155317.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:17.731Z,1510155317.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:18.124Z,1510155318.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:18.527Z,1510155318.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:18.930Z,1510155318.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:19.336Z,1510155319.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:19.734Z,1510155319.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:20.125Z,1510155320.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:20.522Z,1510155320.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:20.934Z,1510155320.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:21.329Z,1510155321.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:21.739Z,1510155321.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:22.125Z,1510155322.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:22.521Z,1510155322.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:22.929Z,1510155322.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:23.334Z,1510155323.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:23.736Z,1510155323.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:24.122Z,1510155324.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:24.517Z,1510155324.517 [BPC1](ERROR): Failed to parse message.
2017-11-08T15:35:24.517Z,1510155324.517 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T15:35:24.517Z,1510155324.517 [BPC1] Data Fault, FailCount= 2
2017-11-08T15:35:24.517Z,1510155324.517 [BPC1](ERROR): Data Fault
2017-11-08T15:35:24.527Z,1510155324.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:24.601Z,1510155324.601 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T15:35:24.935Z,1510155324.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:25.339Z,1510155325.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:25.740Z,1510155325.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:25.829Z,1510155325.829 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T15:35:25.829Z,1510155325.829 [BPC1] No Fault, FailCount= 2
2017-11-08T15:35:26.172Z,1510155326.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:26.529Z,1510155326.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:26.936Z,1510155326.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:27.334Z,1510155327.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:27.734Z,1510155327.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:28.130Z,1510155328.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:28.525Z,1510155328.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:28.934Z,1510155328.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:29.340Z,1510155329.340 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:29.340Z,1510155329.340 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44
2017-11-08T15:35:29.340Z,1510155329.340 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T15:35:29.342Z,1510155329.342 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:29.342Z,1510155329.342 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44
2017-11-08T15:35:29.342Z,1510155329.342 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T15:35:29.344Z,1510155329.344 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:29.344Z,1510155329.344 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 44
2017-11-08T15:35:29.344Z,1510155329.344 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T15:35:29.437Z,1510155329.437 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T15:35:29.437Z,1510155329.437 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T15:35:29.438Z,1510155329.438 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T15:35:29.809Z,1510155329.809 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T15:35:29.809Z,1510155329.809 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44
2017-11-08T15:35:29.809Z,1510155329.809 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T15:35:29.809Z,1510155329.809 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44
2017-11-08T15:35:29.810Z,1510155329.810 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T15:35:29.810Z,1510155329.810 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 44
2017-11-08T15:35:30.131Z,1510155330.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T15:35:30.131Z,1510155330.131 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:35:30.132Z,1510155330.132 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:35:30.132Z,1510155330.132 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T15:35:30.132Z,1510155330.132 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:35:30.133Z,1510155330.133 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:35:30.133Z,1510155330.133 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T15:35:30.133Z,1510155330.133 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:35:30.134Z,1510155330.134 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:35:30.521Z,1510155330.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T15:35:30.522Z,1510155330.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:30.934Z,1510155330.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T15:35:30.935Z,1510155330.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:31.339Z,1510155331.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T15:35:31.339Z,1510155331.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:31.739Z,1510155331.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T15:35:31.740Z,1510155331.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:32.122Z,1510155332.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T15:35:32.123Z,1510155332.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:32.522Z,1510155332.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T15:35:32.523Z,1510155332.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:32.939Z,1510155332.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T15:35:32.940Z,1510155332.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:33.334Z,1510155333.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T15:35:33.335Z,1510155333.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:33.735Z,1510155333.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T15:35:33.736Z,1510155333.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:34.127Z,1510155334.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T15:35:34.128Z,1510155334.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:34.573Z,1510155334.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T15:35:34.574Z,1510155334.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:34.939Z,1510155334.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T15:35:34.940Z,1510155334.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:35.339Z,1510155335.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T15:35:35.340Z,1510155335.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:35.732Z,1510155335.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T15:35:35.733Z,1510155335.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:36.127Z,1510155336.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T15:35:36.127Z,1510155336.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:36.527Z,1510155336.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T15:35:36.528Z,1510155336.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:36.935Z,1510155336.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T15:35:36.936Z,1510155336.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:37.339Z,1510155337.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T15:35:37.340Z,1510155337.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:37.739Z,1510155337.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T15:35:37.740Z,1510155337.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:38.133Z,1510155338.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T15:35:38.134Z,1510155338.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:38.526Z,1510155338.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T15:35:38.527Z,1510155338.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:38.943Z,1510155338.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T15:35:38.944Z,1510155338.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:39.339Z,1510155339.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T15:35:39.340Z,1510155339.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:39.739Z,1510155339.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T15:35:39.740Z,1510155339.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:40.132Z,1510155340.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T15:35:40.133Z,1510155340.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:40.530Z,1510155340.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T15:35:40.531Z,1510155340.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:40.939Z,1510155340.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T15:35:40.940Z,1510155340.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:41.344Z,1510155341.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T15:35:41.345Z,1510155341.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:41.736Z,1510155341.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T15:35:41.737Z,1510155341.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:42.139Z,1510155342.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T15:35:42.140Z,1510155342.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:42.536Z,1510155342.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T15:35:42.537Z,1510155342.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:42.937Z,1510155342.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T15:35:42.938Z,1510155342.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:43.347Z,1510155343.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T15:35:43.348Z,1510155343.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:43.739Z,1510155343.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T15:35:43.740Z,1510155343.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:44.135Z,1510155344.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T15:35:44.137Z,1510155344.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:44.539Z,1510155344.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T15:35:44.540Z,1510155344.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:44.939Z,1510155344.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T15:35:44.940Z,1510155344.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:45.386Z,1510155345.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T15:35:45.387Z,1510155345.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:45.747Z,1510155345.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T15:35:45.748Z,1510155345.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:46.132Z,1510155346.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T15:35:46.137Z,1510155346.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:46.555Z,1510155346.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T15:35:46.556Z,1510155346.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:46.941Z,1510155346.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T15:35:46.942Z,1510155346.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:47.383Z,1510155347.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T15:35:47.383Z,1510155347.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:47.741Z,1510155347.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T15:35:47.742Z,1510155347.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:48.119Z,1510155348.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T15:35:48.120Z,1510155348.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:48.519Z,1510155348.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T15:35:48.520Z,1510155348.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:48.936Z,1510155348.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T15:35:48.937Z,1510155348.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:49.351Z,1510155349.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:49.749Z,1510155349.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:50.124Z,1510155350.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:50.527Z,1510155350.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:50.954Z,1510155350.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:51.346Z,1510155351.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:51.753Z,1510155351.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:52.128Z,1510155352.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:52.526Z,1510155352.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:52.934Z,1510155352.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:53.333Z,1510155353.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:53.730Z,1510155353.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:54.131Z,1510155354.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:54.526Z,1510155354.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:54.929Z,1510155354.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:55.334Z,1510155355.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:55.773Z,1510155355.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:56.124Z,1510155356.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:56.525Z,1510155356.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:56.935Z,1510155356.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:57.332Z,1510155357.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:57.733Z,1510155357.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:58.125Z,1510155358.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:58.525Z,1510155358.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:58.933Z,1510155358.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:59.333Z,1510155359.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:35:59.729Z,1510155359.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:00.129Z,1510155360.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:00.525Z,1510155360.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:00.930Z,1510155360.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:01.333Z,1510155361.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:01.733Z,1510155361.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:02.126Z,1510155362.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:02.524Z,1510155362.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:02.926Z,1510155362.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:03.353Z,1510155363.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:03.755Z,1510155363.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:04.125Z,1510155364.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:04.524Z,1510155364.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:04.933Z,1510155364.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:05.334Z,1510155365.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:05.729Z,1510155365.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:06.131Z,1510155366.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:06.567Z,1510155366.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:06.934Z,1510155366.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:07.333Z,1510155367.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:07.736Z,1510155367.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:08.171Z,1510155368.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:08.526Z,1510155368.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:08.971Z,1510155368.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:09.333Z,1510155369.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:09.763Z,1510155369.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:10.127Z,1510155370.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:10.525Z,1510155370.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:10.933Z,1510155370.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:11.333Z,1510155371.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:11.733Z,1510155371.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:12.127Z,1510155372.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:12.522Z,1510155372.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:12.933Z,1510155372.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:13.335Z,1510155373.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:13.735Z,1510155373.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:14.124Z,1510155374.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:14.521Z,1510155374.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:14.945Z,1510155374.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:15.349Z,1510155375.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:15.733Z,1510155375.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:16.127Z,1510155376.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:16.522Z,1510155376.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:16.929Z,1510155376.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:17.333Z,1510155377.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:17.753Z,1510155377.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:18.151Z,1510155378.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:18.531Z,1510155378.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:18.930Z,1510155378.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:19.333Z,1510155379.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:19.734Z,1510155379.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:20.125Z,1510155380.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:20.523Z,1510155380.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:20.955Z,1510155380.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:21.333Z,1510155381.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:21.733Z,1510155381.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:22.125Z,1510155382.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:22.526Z,1510155382.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:22.935Z,1510155382.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:23.334Z,1510155383.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:23.730Z,1510155383.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:24.125Z,1510155384.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:24.523Z,1510155384.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:24.930Z,1510155384.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:25.335Z,1510155385.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:25.754Z,1510155385.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:26.127Z,1510155386.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:26.530Z,1510155386.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:26.936Z,1510155386.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:27.334Z,1510155387.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:27.739Z,1510155387.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:28.136Z,1510155388.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:28.532Z,1510155388.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:28.973Z,1510155388.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:29.337Z,1510155389.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:29.736Z,1510155389.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:30.141Z,1510155390.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:30.532Z,1510155390.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:30.976Z,1510155390.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:31.340Z,1510155391.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:31.776Z,1510155391.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:32.131Z,1510155392.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:32.531Z,1510155392.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:32.938Z,1510155392.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:33.337Z,1510155393.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:33.739Z,1510155393.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:34.132Z,1510155394.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:34.523Z,1510155394.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:34.939Z,1510155394.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:35.339Z,1510155395.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:35.737Z,1510155395.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:36.127Z,1510155396.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:36.532Z,1510155396.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:36.936Z,1510155396.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:37.340Z,1510155397.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:37.741Z,1510155397.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:38.123Z,1510155398.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:38.529Z,1510155398.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:38.943Z,1510155398.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:39.335Z,1510155399.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:39.738Z,1510155399.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:40.172Z,1510155400.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:40.527Z,1510155400.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:40.939Z,1510155400.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:41.335Z,1510155401.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:41.735Z,1510155401.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:42.128Z,1510155402.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:42.526Z,1510155402.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:42.931Z,1510155402.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:43.343Z,1510155403.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:43.740Z,1510155403.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:44.123Z,1510155404.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:44.526Z,1510155404.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:44.939Z,1510155404.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:45.340Z,1510155405.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:45.743Z,1510155405.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:46.123Z,1510155406.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:46.526Z,1510155406.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:46.940Z,1510155406.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:47.339Z,1510155407.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:47.735Z,1510155407.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:48.128Z,1510155408.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:48.528Z,1510155408.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:48.935Z,1510155408.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:49.339Z,1510155409.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:49.739Z,1510155409.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:50.128Z,1510155410.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:50.527Z,1510155410.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:50.980Z,1510155410.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:51.343Z,1510155411.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:51.740Z,1510155411.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:52.127Z,1510155412.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:52.554Z,1510155412.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:52.944Z,1510155412.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:53.383Z,1510155413.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:53.735Z,1510155413.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:54.152Z,1510155414.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:54.530Z,1510155414.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:54.852Z,1510155414.852 [CommandLine](IMPORTANT): Deactivating dropweight wire
2017-11-08T15:36:54.932Z,1510155414.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:55.343Z,1510155415.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:55.739Z,1510155415.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:55.742Z,1510155415.742 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T15:36:55.742Z,1510155415.742 [Default:CheckIn:C.Wait] Stopped
2017-11-08T15:36:55.742Z,1510155415.742 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T15:36:55.743Z,1510155415.743 [Default:CheckIn:D] Running Loop=1
2017-11-08T15:36:56.132Z,1510155416.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:56.138Z,1510155416.138 [Default:CheckIn:D] Stopped
2017-11-08T15:36:56.138Z,1510155416.138 [Default:CheckIn:E] Running Loop=1
2017-11-08T15:36:56.532Z,1510155416.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:56.536Z,1510155416.536 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 130.252596 min 
2017-11-08T15:36:56.538Z,1510155416.538 [Default:CheckIn:E] Stopped
2017-11-08T15:36:56.538Z,1510155416.538 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T15:36:56.538Z,1510155416.538 [Default:CheckIn] Stopped
2017-11-08T15:36:56.538Z,1510155416.538 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T15:36:56.538Z,1510155416.538 [Default:CheckIn](INFO): Running loop #2
2017-11-08T15:36:56.538Z,1510155416.538 [Default:CheckIn] Running Loop=2
2017-11-08T15:36:56.538Z,1510155416.538 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T15:36:56.538Z,1510155416.538 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T15:36:56.943Z,1510155416.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:57.337Z,1510155417.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:57.740Z,1510155417.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:58.139Z,1510155418.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:58.535Z,1510155418.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:58.947Z,1510155418.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:59.347Z,1510155419.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:36:59.745Z,1510155419.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:00.120Z,1510155420.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:00.523Z,1510155420.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:00.942Z,1510155420.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:01.353Z,1510155421.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:01.750Z,1510155421.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:02.122Z,1510155422.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:02.572Z,1510155422.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:02.953Z,1510155422.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:03.349Z,1510155423.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:03.733Z,1510155423.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:04.131Z,1510155424.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:04.522Z,1510155424.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:04.933Z,1510155424.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:05.333Z,1510155425.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:05.753Z,1510155425.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:06.127Z,1510155426.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:06.526Z,1510155426.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:06.930Z,1510155426.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:07.355Z,1510155427.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:07.731Z,1510155427.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:08.127Z,1510155428.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:08.526Z,1510155428.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:08.935Z,1510155428.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:09.330Z,1510155429.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:09.734Z,1510155429.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:10.129Z,1510155430.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:10.527Z,1510155430.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:10.934Z,1510155430.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:11.334Z,1510155431.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:11.732Z,1510155431.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:12.128Z,1510155432.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:12.535Z,1510155432.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:12.976Z,1510155432.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:13.330Z,1510155433.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:13.739Z,1510155433.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:14.127Z,1510155434.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:14.549Z,1510155434.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:14.935Z,1510155434.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:15.334Z,1510155435.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:15.770Z,1510155435.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:16.126Z,1510155436.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:16.562Z,1510155436.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:16.932Z,1510155436.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:17.333Z,1510155437.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:17.730Z,1510155437.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:18.127Z,1510155438.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:18.531Z,1510155438.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:18.930Z,1510155438.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:19.335Z,1510155439.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:19.734Z,1510155439.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:20.126Z,1510155440.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:20.527Z,1510155440.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:20.934Z,1510155440.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:21.330Z,1510155441.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:21.733Z,1510155441.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:22.126Z,1510155442.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:22.527Z,1510155442.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:22.930Z,1510155442.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:23.337Z,1510155443.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:23.730Z,1510155443.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:24.127Z,1510155444.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:24.525Z,1510155444.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:24.971Z,1510155444.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:25.330Z,1510155445.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:25.734Z,1510155445.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:26.122Z,1510155446.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:26.526Z,1510155446.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:26.934Z,1510155446.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:27.335Z,1510155447.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:27.735Z,1510155447.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:28.129Z,1510155448.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:28.527Z,1510155448.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:28.935Z,1510155448.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:29.334Z,1510155449.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:29.784Z,1510155449.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:30.123Z,1510155450.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:30.583Z,1510155450.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:30.932Z,1510155450.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:31.339Z,1510155451.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:31.772Z,1510155451.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:32.121Z,1510155452.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:32.544Z,1510155452.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:32.939Z,1510155452.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:33.334Z,1510155453.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:33.734Z,1510155453.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:34.127Z,1510155454.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:34.525Z,1510155454.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:34.934Z,1510155454.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:35.339Z,1510155455.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:35.736Z,1510155455.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:36.126Z,1510155456.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:36.526Z,1510155456.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:36.931Z,1510155456.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:37.339Z,1510155457.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:37.740Z,1510155457.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:38.121Z,1510155458.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:38.521Z,1510155458.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:38.939Z,1510155458.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:39.334Z,1510155459.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:39.734Z,1510155459.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:40.125Z,1510155460.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:40.525Z,1510155460.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:40.965Z,1510155460.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:41.339Z,1510155461.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:41.732Z,1510155461.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:42.126Z,1510155462.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:42.526Z,1510155462.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:42.935Z,1510155462.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:43.339Z,1510155463.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:43.739Z,1510155463.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:44.126Z,1510155464.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:44.526Z,1510155464.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:44.936Z,1510155464.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:45.335Z,1510155465.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:45.739Z,1510155465.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:46.131Z,1510155466.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:46.526Z,1510155466.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:46.943Z,1510155466.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:47.343Z,1510155467.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:47.736Z,1510155467.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:48.128Z,1510155468.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:48.527Z,1510155468.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:48.936Z,1510155468.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:49.336Z,1510155469.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:49.736Z,1510155469.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:50.129Z,1510155470.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:50.527Z,1510155470.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:50.939Z,1510155470.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:51.340Z,1510155471.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:51.773Z,1510155471.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:52.131Z,1510155472.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:52.525Z,1510155472.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:52.985Z,1510155472.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:53.341Z,1510155473.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:53.740Z,1510155473.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:54.152Z,1510155474.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:54.526Z,1510155474.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:54.976Z,1510155474.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:55.339Z,1510155475.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:55.739Z,1510155475.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:56.127Z,1510155476.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:56.526Z,1510155476.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:56.939Z,1510155476.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:57.338Z,1510155477.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:57.739Z,1510155477.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:58.132Z,1510155478.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:58.539Z,1510155478.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:58.939Z,1510155478.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:59.339Z,1510155479.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:37:59.735Z,1510155479.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:00.127Z,1510155480.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:00.528Z,1510155480.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:00.935Z,1510155480.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:01.339Z,1510155481.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:01.739Z,1510155481.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:02.127Z,1510155482.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:02.526Z,1510155482.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:02.935Z,1510155482.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:03.383Z,1510155483.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:03.739Z,1510155483.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:04.127Z,1510155484.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:04.526Z,1510155484.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:04.943Z,1510155484.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:05.339Z,1510155485.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:05.735Z,1510155485.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:06.127Z,1510155486.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:06.530Z,1510155486.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:06.935Z,1510155486.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:07.339Z,1510155487.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:07.739Z,1510155487.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:08.130Z,1510155488.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:08.526Z,1510155488.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:08.935Z,1510155488.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:09.339Z,1510155489.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:09.740Z,1510155489.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:10.127Z,1510155490.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:10.526Z,1510155490.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:10.939Z,1510155490.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:11.339Z,1510155491.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:11.735Z,1510155491.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:12.127Z,1510155492.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:12.526Z,1510155492.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:12.947Z,1510155492.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:13.339Z,1510155493.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:13.739Z,1510155493.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:14.152Z,1510155494.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:14.527Z,1510155494.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:14.940Z,1510155494.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:15.379Z,1510155495.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:15.739Z,1510155495.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:16.132Z,1510155496.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:16.551Z,1510155496.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:16.936Z,1510155496.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:17.382Z,1510155497.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:17.743Z,1510155497.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:18.132Z,1510155498.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:18.532Z,1510155498.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:18.936Z,1510155498.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:19.338Z,1510155499.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:19.743Z,1510155499.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:20.132Z,1510155500.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:20.535Z,1510155500.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:20.939Z,1510155500.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:21.343Z,1510155501.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:21.736Z,1510155501.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:22.132Z,1510155502.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:22.536Z,1510155502.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:22.940Z,1510155502.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:23.340Z,1510155503.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:23.738Z,1510155503.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:24.137Z,1510155504.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:24.536Z,1510155504.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:24.943Z,1510155504.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:25.347Z,1510155505.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:25.783Z,1510155505.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:26.137Z,1510155506.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:26.519Z,1510155506.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:26.947Z,1510155506.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:27.346Z,1510155507.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:27.747Z,1510155507.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:28.121Z,1510155508.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:28.520Z,1510155508.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:28.948Z,1510155508.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:29.347Z,1510155509.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:29.749Z,1510155509.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:30.124Z,1510155510.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:30.520Z,1510155510.520 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:30.520Z,1510155510.520 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45
2017-11-08T15:38:30.520Z,1510155510.520 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T15:38:30.522Z,1510155510.522 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:30.522Z,1510155510.522 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45
2017-11-08T15:38:30.522Z,1510155510.522 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T15:38:30.523Z,1510155510.523 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:30.524Z,1510155510.524 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 45
2017-11-08T15:38:30.524Z,1510155510.524 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T15:38:30.617Z,1510155510.617 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T15:38:30.617Z,1510155510.617 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T15:38:30.617Z,1510155510.617 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T15:38:31.005Z,1510155511.005 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T15:38:31.005Z,1510155511.005 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45
2017-11-08T15:38:31.005Z,1510155511.005 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T15:38:31.005Z,1510155511.005 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45
2017-11-08T15:38:31.006Z,1510155511.006 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T15:38:31.006Z,1510155511.006 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 45
2017-11-08T15:38:31.332Z,1510155511.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T15:38:31.332Z,1510155511.332 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:38:31.333Z,1510155511.333 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:38:31.333Z,1510155511.333 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T15:38:31.334Z,1510155511.334 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:38:31.334Z,1510155511.334 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:38:31.334Z,1510155511.334 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T15:38:31.335Z,1510155511.335 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:38:31.335Z,1510155511.335 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:38:31.735Z,1510155511.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T15:38:31.736Z,1510155511.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:32.125Z,1510155512.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T15:38:32.126Z,1510155512.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:32.525Z,1510155512.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T15:38:32.526Z,1510155512.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:32.936Z,1510155512.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T15:38:32.937Z,1510155512.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:33.335Z,1510155513.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T15:38:33.336Z,1510155513.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:33.743Z,1510155513.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T15:38:33.765Z,1510155513.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:34.121Z,1510155514.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T15:38:34.122Z,1510155514.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:34.524Z,1510155514.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T15:38:34.525Z,1510155514.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:34.933Z,1510155514.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T15:38:34.934Z,1510155514.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:35.333Z,1510155515.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T15:38:35.334Z,1510155515.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:35.729Z,1510155515.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T15:38:35.730Z,1510155515.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:36.125Z,1510155516.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T15:38:36.126Z,1510155516.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:36.563Z,1510155516.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T15:38:36.564Z,1510155516.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:36.934Z,1510155516.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T15:38:36.935Z,1510155516.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:37.339Z,1510155517.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T15:38:37.339Z,1510155517.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:37.783Z,1510155517.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-08T15:38:37.784Z,1510155517.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:38.123Z,1510155518.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T15:38:38.123Z,1510155518.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:38.552Z,1510155518.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T15:38:38.573Z,1510155518.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:38.935Z,1510155518.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T15:38:38.936Z,1510155518.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:39.371Z,1510155519.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T15:38:39.372Z,1510155519.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:39.743Z,1510155519.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T15:38:39.744Z,1510155519.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:40.126Z,1510155520.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T15:38:40.127Z,1510155520.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:40.525Z,1510155520.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T15:38:40.526Z,1510155520.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:40.938Z,1510155520.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T15:38:40.939Z,1510155520.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:41.334Z,1510155521.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T15:38:41.335Z,1510155521.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:41.735Z,1510155521.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T15:38:41.736Z,1510155521.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:42.126Z,1510155522.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T15:38:42.127Z,1510155522.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:42.524Z,1510155522.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T15:38:42.525Z,1510155522.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:42.935Z,1510155522.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T15:38:42.936Z,1510155522.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:43.343Z,1510155523.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T15:38:43.344Z,1510155523.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:43.739Z,1510155523.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T15:38:43.740Z,1510155523.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:44.125Z,1510155524.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T15:38:44.126Z,1510155524.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:44.524Z,1510155524.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T15:38:44.525Z,1510155524.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:44.943Z,1510155524.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T15:38:44.944Z,1510155524.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:45.337Z,1510155525.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T15:38:45.338Z,1510155525.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:45.743Z,1510155525.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T15:38:45.744Z,1510155525.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:46.125Z,1510155526.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T15:38:46.126Z,1510155526.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:46.528Z,1510155526.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T15:38:46.529Z,1510155526.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:46.938Z,1510155526.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T15:38:46.939Z,1510155526.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:47.337Z,1510155527.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T15:38:47.338Z,1510155527.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:47.771Z,1510155527.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T15:38:47.772Z,1510155527.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:48.129Z,1510155528.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T15:38:48.130Z,1510155528.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:48.525Z,1510155528.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T15:38:48.526Z,1510155528.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:48.935Z,1510155528.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T15:38:48.936Z,1510155528.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:49.343Z,1510155529.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T15:38:49.344Z,1510155529.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:49.738Z,1510155529.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T15:38:49.739Z,1510155529.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:50.125Z,1510155530.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T15:38:50.126Z,1510155530.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:50.525Z,1510155530.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:50.939Z,1510155530.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:51.338Z,1510155531.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:51.743Z,1510155531.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:52.123Z,1510155532.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:52.525Z,1510155532.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:52.943Z,1510155532.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:53.338Z,1510155533.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:53.734Z,1510155533.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:54.129Z,1510155534.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:54.525Z,1510155534.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:54.935Z,1510155534.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:55.340Z,1510155535.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:55.735Z,1510155535.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:56.126Z,1510155536.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:56.530Z,1510155536.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:56.939Z,1510155536.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:57.338Z,1510155537.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:57.744Z,1510155537.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:58.152Z,1510155538.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:58.526Z,1510155538.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:58.940Z,1510155538.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:59.339Z,1510155539.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:38:59.780Z,1510155539.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:00.129Z,1510155540.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:00.559Z,1510155540.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:00.939Z,1510155540.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:01.383Z,1510155541.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:01.736Z,1510155541.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:02.127Z,1510155542.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:02.533Z,1510155542.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:02.937Z,1510155542.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:03.341Z,1510155543.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:03.742Z,1510155543.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:04.129Z,1510155544.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:04.528Z,1510155544.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:04.942Z,1510155544.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:05.339Z,1510155545.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:05.738Z,1510155545.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:06.142Z,1510155546.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:06.532Z,1510155546.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:06.939Z,1510155546.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:07.345Z,1510155547.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:07.741Z,1510155547.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:08.137Z,1510155548.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:08.520Z,1510155548.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:08.943Z,1510155548.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:09.342Z,1510155549.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:09.788Z,1510155549.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:10.121Z,1510155550.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:10.523Z,1510155550.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:10.950Z,1510155550.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:11.351Z,1510155551.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:11.746Z,1510155551.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:12.122Z,1510155552.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:12.522Z,1510155552.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:12.926Z,1510155552.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:13.329Z,1510155553.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:13.733Z,1510155553.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:14.122Z,1510155554.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:14.527Z,1510155554.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:14.933Z,1510155554.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:15.333Z,1510155555.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:15.735Z,1510155555.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:16.125Z,1510155556.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:16.527Z,1510155556.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:16.955Z,1510155556.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:17.334Z,1510155557.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:17.729Z,1510155557.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:18.125Z,1510155558.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:18.528Z,1510155558.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:18.930Z,1510155558.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:19.355Z,1510155559.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:19.734Z,1510155559.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:20.125Z,1510155560.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:20.564Z,1510155560.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:20.934Z,1510155560.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:21.330Z,1510155561.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:21.781Z,1510155561.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:22.126Z,1510155562.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:22.527Z,1510155562.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:22.963Z,1510155562.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:23.337Z,1510155563.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:23.764Z,1510155563.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:24.127Z,1510155564.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:24.524Z,1510155564.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:24.930Z,1510155564.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:25.335Z,1510155565.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:25.734Z,1510155565.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:26.121Z,1510155566.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:26.525Z,1510155566.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:26.934Z,1510155566.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:27.330Z,1510155567.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:27.731Z,1510155567.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:28.129Z,1510155568.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:28.527Z,1510155568.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:28.935Z,1510155568.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:29.333Z,1510155569.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:29.730Z,1510155569.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:30.128Z,1510155570.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:30.526Z,1510155570.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:30.930Z,1510155570.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:31.333Z,1510155571.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:31.734Z,1510155571.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:32.163Z,1510155572.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:32.521Z,1510155572.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:32.934Z,1510155572.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:33.330Z,1510155573.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:33.735Z,1510155573.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:34.126Z,1510155574.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:34.525Z,1510155574.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:34.930Z,1510155574.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:35.333Z,1510155575.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:35.730Z,1510155575.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:36.126Z,1510155576.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:36.531Z,1510155576.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:36.931Z,1510155576.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:37.335Z,1510155577.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:37.734Z,1510155577.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:38.122Z,1510155578.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:38.522Z,1510155578.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:38.934Z,1510155578.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:39.333Z,1510155579.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:39.733Z,1510155579.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:40.123Z,1510155580.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:40.523Z,1510155580.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:40.933Z,1510155580.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:41.333Z,1510155581.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:41.732Z,1510155581.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:42.129Z,1510155582.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:42.571Z,1510155582.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:42.931Z,1510155582.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:43.334Z,1510155583.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:43.739Z,1510155583.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:44.127Z,1510155584.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:44.569Z,1510155584.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:44.940Z,1510155584.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:45.375Z,1510155585.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:45.736Z,1510155585.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:46.171Z,1510155586.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:46.525Z,1510155586.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:46.937Z,1510155586.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:47.344Z,1510155587.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:47.740Z,1510155587.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:48.128Z,1510155588.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:48.523Z,1510155588.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:48.939Z,1510155588.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:49.340Z,1510155589.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:49.743Z,1510155589.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:50.126Z,1510155590.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:50.531Z,1510155590.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:50.939Z,1510155590.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:51.339Z,1510155591.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:51.739Z,1510155591.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:52.126Z,1510155592.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:52.525Z,1510155592.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:52.944Z,1510155592.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:53.337Z,1510155593.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:53.735Z,1510155593.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:54.126Z,1510155594.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:54.563Z,1510155594.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:54.938Z,1510155594.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:55.346Z,1510155595.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:55.735Z,1510155595.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:56.126Z,1510155596.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:56.530Z,1510155596.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:56.944Z,1510155596.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:57.338Z,1510155597.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:57.737Z,1510155597.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:58.123Z,1510155598.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:58.529Z,1510155598.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:58.935Z,1510155598.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:59.338Z,1510155599.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:39:59.787Z,1510155599.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:00.132Z,1510155600.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:00.525Z,1510155600.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:00.939Z,1510155600.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:01.346Z,1510155601.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:01.738Z,1510155601.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:02.127Z,1510155602.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:02.525Z,1510155602.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:02.935Z,1510155602.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:03.338Z,1510155603.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:03.738Z,1510155603.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:04.123Z,1510155604.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:04.526Z,1510155604.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:04.943Z,1510155604.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:05.344Z,1510155605.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:05.735Z,1510155605.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:06.145Z,1510155606.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:06.525Z,1510155606.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:06.935Z,1510155606.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:07.368Z,1510155607.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:07.744Z,1510155607.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:08.167Z,1510155608.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:08.525Z,1510155608.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:08.938Z,1510155608.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:09.338Z,1510155609.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:09.738Z,1510155609.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:10.126Z,1510155610.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:10.525Z,1510155610.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:10.943Z,1510155610.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:11.338Z,1510155611.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:11.735Z,1510155611.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:12.126Z,1510155612.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:12.525Z,1510155612.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:12.939Z,1510155612.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:13.336Z,1510155613.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:13.735Z,1510155613.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:14.126Z,1510155614.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:14.525Z,1510155614.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:14.935Z,1510155614.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:15.343Z,1510155615.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:15.739Z,1510155615.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:16.126Z,1510155616.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:16.571Z,1510155616.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:16.943Z,1510155616.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:17.336Z,1510155617.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:17.743Z,1510155617.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:18.131Z,1510155618.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:18.523Z,1510155618.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:18.944Z,1510155618.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:19.339Z,1510155619.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:19.736Z,1510155619.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:20.128Z,1510155620.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:20.531Z,1510155620.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:20.940Z,1510155620.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:21.339Z,1510155621.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:21.736Z,1510155621.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:22.125Z,1510155622.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:22.527Z,1510155622.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:22.937Z,1510155622.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:23.337Z,1510155623.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:23.737Z,1510155623.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:24.130Z,1510155624.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:24.525Z,1510155624.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:24.943Z,1510155624.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:25.340Z,1510155625.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:25.740Z,1510155625.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:26.125Z,1510155626.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:26.528Z,1510155626.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:26.937Z,1510155626.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:27.339Z,1510155627.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:27.747Z,1510155627.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:28.151Z,1510155628.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:28.532Z,1510155628.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:28.991Z,1510155628.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:29.339Z,1510155629.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:29.733Z,1510155629.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:30.152Z,1510155630.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:30.530Z,1510155630.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:30.979Z,1510155630.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:31.344Z,1510155631.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:31.735Z,1510155631.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:32.127Z,1510155632.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:32.533Z,1510155632.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:32.936Z,1510155632.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:33.336Z,1510155633.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:33.747Z,1510155633.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:34.132Z,1510155634.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:34.532Z,1510155634.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:34.936Z,1510155634.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:35.338Z,1510155635.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:35.739Z,1510155635.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:36.139Z,1510155636.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:36.532Z,1510155636.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:36.936Z,1510155636.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:37.339Z,1510155637.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:37.739Z,1510155637.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:38.131Z,1510155638.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:38.538Z,1510155638.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:38.943Z,1510155638.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:39.382Z,1510155639.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:39.740Z,1510155639.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:40.137Z,1510155640.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:40.515Z,1510155640.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:40.940Z,1510155640.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:41.338Z,1510155641.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:41.737Z,1510155641.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:42.138Z,1510155642.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:42.538Z,1510155642.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:42.937Z,1510155642.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:43.347Z,1510155643.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:43.743Z,1510155643.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:44.116Z,1510155644.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:44.515Z,1510155644.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:44.944Z,1510155644.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:45.340Z,1510155645.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:45.747Z,1510155645.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:46.119Z,1510155646.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:46.539Z,1510155646.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:46.951Z,1510155646.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:47.343Z,1510155647.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:47.744Z,1510155647.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:48.153Z,1510155648.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:48.523Z,1510155648.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:48.950Z,1510155648.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:49.333Z,1510155649.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:49.758Z,1510155649.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:50.122Z,1510155650.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:50.523Z,1510155650.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:50.934Z,1510155650.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:51.380Z,1510155651.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:51.734Z,1510155651.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:52.124Z,1510155652.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:52.559Z,1510155652.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:52.938Z,1510155652.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:53.363Z,1510155653.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:53.730Z,1510155653.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:54.127Z,1510155654.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:54.525Z,1510155654.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:54.930Z,1510155654.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:55.333Z,1510155655.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:55.735Z,1510155655.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:56.126Z,1510155656.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:56.529Z,1510155656.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:56.934Z,1510155656.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:57.330Z,1510155657.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:57.738Z,1510155657.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:58.127Z,1510155658.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:58.526Z,1510155658.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:58.933Z,1510155658.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:59.339Z,1510155659.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:40:59.731Z,1510155659.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:00.128Z,1510155660.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:00.531Z,1510155660.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:00.931Z,1510155660.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:01.339Z,1510155661.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:01.767Z,1510155661.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:02.127Z,1510155662.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:02.526Z,1510155662.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:02.936Z,1510155662.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:03.334Z,1510155663.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:03.734Z,1510155663.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:04.126Z,1510155664.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:04.526Z,1510155664.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:04.934Z,1510155664.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:05.337Z,1510155665.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:05.733Z,1510155665.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:06.127Z,1510155666.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:06.527Z,1510155666.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:06.933Z,1510155666.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:07.339Z,1510155667.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:07.734Z,1510155667.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:08.125Z,1510155668.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:08.526Z,1510155668.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:08.935Z,1510155668.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:09.334Z,1510155669.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:09.734Z,1510155669.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:10.127Z,1510155670.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:10.525Z,1510155670.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:10.932Z,1510155670.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:11.334Z,1510155671.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:11.730Z,1510155671.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:12.127Z,1510155672.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:12.526Z,1510155672.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:12.922Z,1510155672.922 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-08T15:41:12.922Z,1510155672.922 [BPC1] Data Fault, FailCount= 1
2017-11-08T15:41:12.922Z,1510155672.922 [BPC1](ERROR): Data Fault
2017-11-08T15:41:12.932Z,1510155672.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:13.029Z,1510155673.029 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T15:41:13.335Z,1510155673.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:13.734Z,1510155673.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:14.121Z,1510155674.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:14.202Z,1510155674.202 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T15:41:14.202Z,1510155674.202 [BPC1] No Fault, FailCount= 1
2017-11-08T15:41:14.564Z,1510155674.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:14.939Z,1510155674.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:15.334Z,1510155675.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:15.734Z,1510155675.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:16.123Z,1510155676.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:16.521Z,1510155676.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:16.934Z,1510155676.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:17.334Z,1510155677.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:17.731Z,1510155677.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:18.127Z,1510155678.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:18.529Z,1510155678.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:18.931Z,1510155678.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:19.334Z,1510155679.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:19.740Z,1510155679.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:20.126Z,1510155680.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:20.522Z,1510155680.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:20.939Z,1510155680.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:21.334Z,1510155681.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:21.734Z,1510155681.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:22.126Z,1510155682.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:22.521Z,1510155682.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:22.972Z,1510155682.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:23.343Z,1510155683.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:23.731Z,1510155683.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:24.126Z,1510155684.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:24.527Z,1510155684.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:24.935Z,1510155684.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:25.339Z,1510155685.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:25.739Z,1510155685.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:26.121Z,1510155686.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:26.529Z,1510155686.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:26.939Z,1510155686.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:27.333Z,1510155687.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:27.734Z,1510155687.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:28.130Z,1510155688.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:28.527Z,1510155688.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:28.939Z,1510155688.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:29.339Z,1510155689.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:29.734Z,1510155689.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:30.132Z,1510155690.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:30.526Z,1510155690.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:30.935Z,1510155690.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:31.343Z,1510155691.343 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:31.343Z,1510155691.343 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46
2017-11-08T15:41:31.343Z,1510155691.343 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T15:41:31.345Z,1510155691.345 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:31.345Z,1510155691.345 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46
2017-11-08T15:41:31.345Z,1510155691.345 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T15:41:31.347Z,1510155691.347 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:31.347Z,1510155691.347 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 46
2017-11-08T15:41:31.347Z,1510155691.347 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T15:41:31.481Z,1510155691.481 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T15:41:31.481Z,1510155691.481 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T15:41:31.481Z,1510155691.481 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T15:41:31.814Z,1510155691.814 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T15:41:31.814Z,1510155691.814 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46
2017-11-08T15:41:31.814Z,1510155691.814 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T15:41:31.815Z,1510155691.815 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46
2017-11-08T15:41:31.815Z,1510155691.815 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T15:41:31.815Z,1510155691.815 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 46
2017-11-08T15:41:32.131Z,1510155692.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T15:41:32.131Z,1510155692.131 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:41:32.132Z,1510155692.132 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:41:32.132Z,1510155692.132 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T15:41:32.133Z,1510155692.133 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:41:32.133Z,1510155692.133 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:41:32.134Z,1510155692.134 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T15:41:32.134Z,1510155692.134 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:41:32.134Z,1510155692.134 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:41:32.536Z,1510155692.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T15:41:32.537Z,1510155692.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:32.947Z,1510155692.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T15:41:32.948Z,1510155692.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:33.340Z,1510155693.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T15:41:33.341Z,1510155693.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:33.740Z,1510155693.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T15:41:33.741Z,1510155693.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:34.136Z,1510155694.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T15:41:34.137Z,1510155694.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:34.539Z,1510155694.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T15:41:34.540Z,1510155694.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:34.993Z,1510155694.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T15:41:34.993Z,1510155694.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:35.347Z,1510155695.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T15:41:35.348Z,1510155695.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:35.755Z,1510155695.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T15:41:35.756Z,1510155695.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:36.142Z,1510155696.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T15:41:36.143Z,1510155696.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:36.559Z,1510155696.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T15:41:36.560Z,1510155696.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:36.945Z,1510155696.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T15:41:36.946Z,1510155696.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:37.345Z,1510155697.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T15:41:37.346Z,1510155697.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:37.742Z,1510155697.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T15:41:37.743Z,1510155697.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:38.120Z,1510155698.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T15:41:38.121Z,1510155698.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:38.527Z,1510155698.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T15:41:38.528Z,1510155698.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:38.947Z,1510155698.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T15:41:38.948Z,1510155698.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:39.348Z,1510155699.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T15:41:39.349Z,1510155699.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:39.746Z,1510155699.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T15:41:39.747Z,1510155699.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:40.121Z,1510155700.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T15:41:40.122Z,1510155700.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:40.520Z,1510155700.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T15:41:40.521Z,1510155700.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:40.949Z,1510155700.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T15:41:40.950Z,1510155700.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:41.346Z,1510155701.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T15:41:41.347Z,1510155701.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:41.749Z,1510155701.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T15:41:41.750Z,1510155701.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:42.123Z,1510155702.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T15:41:42.124Z,1510155702.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:42.519Z,1510155702.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T15:41:42.520Z,1510155702.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:42.942Z,1510155702.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T15:41:42.943Z,1510155702.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:43.352Z,1510155703.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T15:41:43.353Z,1510155703.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:43.750Z,1510155703.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T15:41:43.751Z,1510155703.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:44.126Z,1510155704.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T15:41:44.127Z,1510155704.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:44.531Z,1510155704.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T15:41:44.532Z,1510155704.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:44.973Z,1510155704.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T15:41:44.974Z,1510155704.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:45.343Z,1510155705.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T15:41:45.344Z,1510155705.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:45.743Z,1510155705.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T15:41:45.744Z,1510155705.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:46.131Z,1510155706.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T15:41:46.132Z,1510155706.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:46.527Z,1510155706.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T15:41:46.528Z,1510155706.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:46.932Z,1510155706.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T15:41:46.933Z,1510155706.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:47.335Z,1510155707.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T15:41:47.336Z,1510155707.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:47.727Z,1510155707.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T15:41:47.728Z,1510155707.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:48.140Z,1510155708.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T15:41:48.141Z,1510155708.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:48.536Z,1510155708.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T15:41:48.537Z,1510155708.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:48.939Z,1510155708.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T15:41:48.940Z,1510155708.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:49.327Z,1510155709.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T15:41:49.328Z,1510155709.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:49.726Z,1510155709.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T15:41:49.727Z,1510155709.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:50.127Z,1510155710.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T15:41:50.128Z,1510155710.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:50.526Z,1510155710.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T15:41:50.527Z,1510155710.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:50.939Z,1510155710.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T15:41:50.940Z,1510155710.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:51.339Z,1510155711.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-08T15:41:51.340Z,1510155711.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:51.743Z,1510155711.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:52.127Z,1510155712.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:52.526Z,1510155712.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:52.940Z,1510155712.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:53.339Z,1510155713.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:53.743Z,1510155713.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:54.126Z,1510155714.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:54.526Z,1510155714.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:54.935Z,1510155714.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:55.339Z,1510155715.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:55.739Z,1510155715.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:56.127Z,1510155716.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:56.526Z,1510155716.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:56.992Z,1510155716.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:56.999Z,1510155716.999 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T15:36:56.5Z
2017-11-08T15:41:56.999Z,1510155716.999 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T15:41:56.999Z,1510155716.999 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T15:41:57.339Z,1510155717.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:57.736Z,1510155717.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:58.151Z,1510155718.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:58.555Z,1510155718.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:58.964Z,1510155718.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:59.630Z,1510155719.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:41:59.758Z,1510155719.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:00.185Z,1510155720.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:00.584Z,1510155720.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:00.985Z,1510155720.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:01.357Z,1510155721.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:01.754Z,1510155721.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:02.158Z,1510155722.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:02.588Z,1510155722.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:02.954Z,1510155722.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:03.381Z,1510155723.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:04.061Z,1510155724.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:04.212Z,1510155724.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:04.619Z,1510155724.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:05.016Z,1510155725.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:05.417Z,1510155725.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:05.795Z,1510155725.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:06.196Z,1510155726.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:06.623Z,1510155726.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:07.061Z,1510155727.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:07.678Z,1510155727.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:07.826Z,1510155727.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:08.218Z,1510155728.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:08.621Z,1510155728.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:09.017Z,1510155729.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:09.408Z,1510155729.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:09.799Z,1510155729.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:10.217Z,1510155730.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:10.627Z,1510155730.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:10.999Z,1510155730.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:11.427Z,1510155731.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:12.095Z,1510155732.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:12.264Z,1510155732.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:12.670Z,1510155732.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:13.070Z,1510155733.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:13.469Z,1510155733.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:13.841Z,1510155733.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:14.248Z,1510155734.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:14.680Z,1510155734.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:15.070Z,1510155735.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:15.727Z,1510155735.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:15.875Z,1510155735.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:16.277Z,1510155736.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:16.683Z,1510155736.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:17.081Z,1510155737.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:17.480Z,1510155737.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:17.879Z,1510155737.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:18.256Z,1510155738.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:18.688Z,1510155738.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:19.130Z,1510155739.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:19.477Z,1510155739.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:20.291Z,1510155740.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:20.459Z,1510155740.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:20.891Z,1510155740.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:21.256Z,1510155741.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:21.647Z,1510155741.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:22.039Z,1510155742.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:22.434Z,1510155742.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:22.868Z,1510155742.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:23.253Z,1510155743.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:23.917Z,1510155743.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:24.099Z,1510155744.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:24.496Z,1510155744.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:24.896Z,1510155744.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:25.300Z,1510155745.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:25.696Z,1510155745.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:26.073Z,1510155746.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:26.494Z,1510155746.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:26.909Z,1510155746.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:27.296Z,1510155747.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:27.700Z,1510155747.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:28.365Z,1510155748.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:28.480Z,1510155748.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:28.946Z,1510155748.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:29.306Z,1510155749.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:29.705Z,1510155749.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:30.105Z,1510155750.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:30.519Z,1510155750.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:30.903Z,1510155750.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:31.573Z,1510155751.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:31.713Z,1510155751.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:32.114Z,1510155752.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:32.515Z,1510155752.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:32.910Z,1510155752.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:33.302Z,1510155753.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:33.705Z,1510155753.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:34.107Z,1510155754.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:34.527Z,1510155754.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:34.903Z,1510155754.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:35.317Z,1510155755.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:35.000Z,1510155756.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:36.155Z,1510155756.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:36.560Z,1510155756.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:36.959Z,1510155756.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:37.359Z,1510155757.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:37.739Z,1510155757.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:38.139Z,1510155758.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:38.571Z,1510155758.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:38.957Z,1510155758.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:39.627Z,1510155759.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:39.768Z,1510155759.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:40.173Z,1510155760.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:40.576Z,1510155760.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:41.028Z,1510155761.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:41.391Z,1510155761.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:41.771Z,1510155761.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:42.160Z,1510155762.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:42.627Z,1510155762.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:42.972Z,1510155762.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:43.415Z,1510155763.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:44.050Z,1510155764.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:44.197Z,1510155764.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:44.625Z,1510155764.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:45.025Z,1510155765.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:45.425Z,1510155765.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:45.824Z,1510155765.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:46.201Z,1510155766.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:46.635Z,1510155766.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:47.034Z,1510155767.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:47.683Z,1510155767.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:47.827Z,1510155767.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:48.231Z,1510155768.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:48.631Z,1510155768.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:48.710Z,1510155768.710 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T15:42:49.025Z,1510155769.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:49.427Z,1510155769.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:49.804Z,1510155769.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:50.204Z,1510155770.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:50.637Z,1510155770.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:51.004Z,1510155771.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:51.451Z,1510155771.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:52.099Z,1510155772.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:52.236Z,1510155772.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:52.651Z,1510155772.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:53.048Z,1510155773.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:53.452Z,1510155773.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:53.840Z,1510155773.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:54.236Z,1510155774.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:54.656Z,1510155774.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:55.048Z,1510155775.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:55.747Z,1510155775.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:55.881Z,1510155775.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:56.292Z,1510155776.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:56.695Z,1510155776.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:57.101Z,1510155777.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:57.482Z,1510155777.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:57.884Z,1510155777.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:58.298Z,1510155778.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:58.683Z,1510155778.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:59.083Z,1510155779.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:42:59.496Z,1510155779.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:00.176Z,1510155780.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:00.328Z,1510155780.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:00.714Z,1510155780.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:01.113Z,1510155781.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:01.513Z,1510155781.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:01.906Z,1510155781.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:02.304Z,1510155782.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:02.706Z,1510155782.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:03.106Z,1510155783.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:03.563Z,1510155783.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:03.967Z,1510155783.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:04.595Z,1510155784.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:04.752Z,1510155784.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:05.164Z,1510155785.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:05.603Z,1510155785.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:05.955Z,1510155785.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:06.397Z,1510155786.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:06.751Z,1510155786.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:07.147Z,1510155787.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:07.570Z,1510155787.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:07.950Z,1510155787.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:08.363Z,1510155788.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:09.052Z,1510155789.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:09.203Z,1510155789.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:09.602Z,1510155789.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:10.004Z,1510155790.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:10.409Z,1510155790.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:10.807Z,1510155790.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:11.184Z,1510155791.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:11.611Z,1510155791.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:12.005Z,1510155792.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:12.665Z,1510155792.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:12.813Z,1510155792.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:13.219Z,1510155793.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:13.615Z,1510155793.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:14.003Z,1510155794.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:14.423Z,1510155794.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:14.807Z,1510155794.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:15.216Z,1510155795.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:15.604Z,1510155795.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:16.004Z,1510155796.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:16.409Z,1510155796.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:17.074Z,1510155797.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:17.210Z,1510155797.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:17.616Z,1510155797.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:18.011Z,1510155798.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:18.416Z,1510155798.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:18.808Z,1510155798.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:19.223Z,1510155799.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:19.623Z,1510155799.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:20.320Z,1510155800.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:20.469Z,1510155800.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:20.869Z,1510155800.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:21.268Z,1510155801.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:21.680Z,1510155801.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:22.065Z,1510155802.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:22.461Z,1510155802.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:22.865Z,1510155802.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:23.265Z,1510155803.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:23.683Z,1510155803.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:24.076Z,1510155804.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:24.734Z,1510155804.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:24.888Z,1510155804.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:25.284Z,1510155805.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:25.684Z,1510155805.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:26.079Z,1510155806.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:26.547Z,1510155806.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:26.881Z,1510155806.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:27.323Z,1510155807.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:27.683Z,1510155807.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:28.370Z,1510155808.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:28.513Z,1510155808.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:28.925Z,1510155808.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:29.329Z,1510155809.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:29.728Z,1510155809.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:30.124Z,1510155810.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:30.524Z,1510155810.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:30.905Z,1510155810.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:31.347Z,1510155811.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:31.731Z,1510155811.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:32.133Z,1510155812.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:32.795Z,1510155812.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:32.935Z,1510155812.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:33.345Z,1510155813.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:33.740Z,1510155813.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:34.147Z,1510155814.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:34.535Z,1510155814.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:34.920Z,1510155814.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:35.354Z,1510155815.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:35.742Z,1510155815.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:36.441Z,1510155816.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:36.592Z,1510155816.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:36.995Z,1510155816.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:37.397Z,1510155817.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:37.800Z,1510155817.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:38.176Z,1510155818.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:38.579Z,1510155818.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:38.978Z,1510155818.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:39.412Z,1510155819.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:39.775Z,1510155819.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:40.199Z,1510155820.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:40.868Z,1510155820.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:41.026Z,1510155821.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:41.459Z,1510155821.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:41.853Z,1510155821.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:42.251Z,1510155822.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:42.631Z,1510155822.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:43.032Z,1510155823.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:43.468Z,1510155823.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:43.858Z,1510155823.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:44.558Z,1510155824.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:44.728Z,1510155824.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:45.120Z,1510155825.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:45.519Z,1510155825.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:45.916Z,1510155825.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:46.308Z,1510155826.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:46.707Z,1510155826.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:47.107Z,1510155827.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:47.526Z,1510155827.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:47.903Z,1510155827.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:48.371Z,1510155828.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:49.030Z,1510155829.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:49.175Z,1510155829.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:49.576Z,1510155829.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:50.011Z,1510155830.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:50.372Z,1510155830.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:50.795Z,1510155830.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:51.187Z,1510155831.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:51.583Z,1510155831.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:52.265Z,1510155832.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:52.419Z,1510155832.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:52.817Z,1510155832.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:53.216Z,1510155833.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:53.627Z,1510155833.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:53.995Z,1510155833.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:54.394Z,1510155834.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:54.809Z,1510155834.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:55.265Z,1510155835.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:55.594Z,1510155835.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:56.019Z,1510155836.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:56.686Z,1510155836.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:56.829Z,1510155836.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:57.229Z,1510155837.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:57.623Z,1510155837.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:58.024Z,1510155838.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:58.421Z,1510155838.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:58.839Z,1510155838.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:59.220Z,1510155839.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:43:59.642Z,1510155839.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:00.032Z,1510155840.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:00.684Z,1510155840.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:00.835Z,1510155840.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:01.231Z,1510155841.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:01.626Z,1510155841.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:02.035Z,1510155842.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:02.424Z,1510155842.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:02.829Z,1510155842.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:03.251Z,1510155843.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:03.628Z,1510155843.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:04.011Z,1510155844.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:04.435Z,1510155844.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:05.106Z,1510155845.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:05.270Z,1510155845.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:05.672Z,1510155845.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:06.075Z,1510155846.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:06.467Z,1510155846.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:06.840Z,1510155846.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:07.240Z,1510155847.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:07.640Z,1510155847.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:08.045Z,1510155848.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:08.484Z,1510155848.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:08.850Z,1510155848.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:09.570Z,1510155849.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:09.699Z,1510155849.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:10.123Z,1510155850.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:10.551Z,1510155850.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:10.951Z,1510155850.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:11.302Z,1510155851.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:11.744Z,1510155851.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:12.124Z,1510155852.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:12.570Z,1510155852.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:12.898Z,1510155852.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:13.327Z,1510155853.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:13.987Z,1510155853.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:14.129Z,1510155854.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:14.537Z,1510155854.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:14.931Z,1510155854.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:15.337Z,1510155855.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:15.723Z,1510155855.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:16.126Z,1510155856.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:16.566Z,1510155856.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:16.936Z,1510155856.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:17.587Z,1510155857.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:17.732Z,1510155857.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:18.139Z,1510155858.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:18.538Z,1510155858.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:18.944Z,1510155858.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:19.327Z,1510155859.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:19.726Z,1510155859.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:20.130Z,1510155860.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:20.552Z,1510155860.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:20.953Z,1510155860.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:21.342Z,1510155861.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:22.026Z,1510155862.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:22.183Z,1510155862.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:22.591Z,1510155862.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:22.993Z,1510155862.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:23.390Z,1510155863.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:23.789Z,1510155863.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:24.197Z,1510155864.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:24.594Z,1510155864.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:25.257Z,1510155865.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:25.396Z,1510155865.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:25.799Z,1510155865.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:26.202Z,1510155866.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:26.595Z,1510155866.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:26.992Z,1510155866.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:27.389Z,1510155867.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:27.778Z,1510155867.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:28.203Z,1510155868.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:28.579Z,1510155868.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:28.000Z,1510155869.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:29.670Z,1510155869.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:29.844Z,1510155869.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:30.256Z,1510155870.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:30.653Z,1510155870.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:31.030Z,1510155871.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:31.424Z,1510155871.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:31.820Z,1510155871.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:32.250Z,1510155872.250 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:32.250Z,1510155872.250 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47
2017-11-08T15:44:32.250Z,1510155872.250 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T15:44:32.252Z,1510155872.252 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:32.252Z,1510155872.252 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47
2017-11-08T15:44:32.252Z,1510155872.252 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T15:44:32.254Z,1510155872.254 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:32.254Z,1510155872.254 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 47
2017-11-08T15:44:32.254Z,1510155872.254 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T15:44:32.333Z,1510155872.333 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T15:44:32.333Z,1510155872.333 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T15:44:32.334Z,1510155872.334 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T15:44:32.765Z,1510155872.765 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T15:44:32.765Z,1510155872.765 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47
2017-11-08T15:44:32.766Z,1510155872.766 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T15:44:32.766Z,1510155872.766 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47
2017-11-08T15:44:32.766Z,1510155872.766 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T15:44:32.766Z,1510155872.766 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 47
2017-11-08T15:44:33.320Z,1510155873.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T15:44:33.320Z,1510155873.320 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:44:33.321Z,1510155873.321 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:44:33.333Z,1510155873.333 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T15:44:33.333Z,1510155873.333 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:44:33.333Z,1510155873.333 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:44:33.334Z,1510155873.334 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T15:44:33.334Z,1510155873.334 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:44:33.334Z,1510155873.334 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:44:33.479Z,1510155873.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T15:44:33.480Z,1510155873.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:33.876Z,1510155873.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T15:44:33.877Z,1510155873.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:34.321Z,1510155874.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2017-11-08T15:44:34.322Z,1510155874.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:34.678Z,1510155874.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T15:44:34.679Z,1510155874.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:35.091Z,1510155875.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T15:44:35.092Z,1510155875.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:35.451Z,1510155875.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T15:44:35.452Z,1510155875.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:35.853Z,1510155875.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T15:44:35.854Z,1510155875.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:36.289Z,1510155876.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T15:44:36.289Z,1510155876.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:36.650Z,1510155876.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T15:44:36.651Z,1510155876.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:37.080Z,1510155877.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T15:44:37.081Z,1510155877.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:37.749Z,1510155877.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-08T15:44:37.750Z,1510155877.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:37.919Z,1510155877.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-08T15:44:37.920Z,1510155877.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:38.307Z,1510155878.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-08T15:44:38.308Z,1510155878.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:38.702Z,1510155878.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-08T15:44:38.703Z,1510155878.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:39.100Z,1510155879.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T15:44:39.101Z,1510155879.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:39.497Z,1510155879.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T15:44:39.498Z,1510155879.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:39.895Z,1510155879.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T15:44:39.896Z,1510155879.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:40.318Z,1510155880.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T15:44:40.318Z,1510155880.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:40.702Z,1510155880.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T15:44:40.703Z,1510155880.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:41.377Z,1510155881.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2017-11-08T15:44:41.378Z,1510155881.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:41.538Z,1510155881.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T15:44:41.539Z,1510155881.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:41.932Z,1510155881.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T15:44:41.933Z,1510155881.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:42.335Z,1510155882.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T15:44:42.336Z,1510155882.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:42.731Z,1510155882.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T15:44:42.732Z,1510155882.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:43.151Z,1510155883.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T15:44:43.152Z,1510155883.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:43.511Z,1510155883.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T15:44:43.512Z,1510155883.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:43.910Z,1510155883.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T15:44:43.911Z,1510155883.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:44.341Z,1510155884.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T15:44:44.342Z,1510155884.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:44.710Z,1510155884.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T15:44:44.711Z,1510155884.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:45.132Z,1510155885.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T15:44:45.137Z,1510155885.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:45.809Z,1510155885.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T15:44:45.810Z,1510155885.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:45.967Z,1510155885.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T15:44:45.968Z,1510155885.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:46.360Z,1510155886.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T15:44:46.361Z,1510155886.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:46.756Z,1510155886.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T15:44:46.757Z,1510155886.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:47.159Z,1510155887.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T15:44:47.160Z,1510155887.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:47.546Z,1510155887.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T15:44:47.547Z,1510155887.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:47.991Z,1510155887.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T15:44:47.992Z,1510155887.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:48.362Z,1510155888.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T15:44:48.363Z,1510155888.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:48.764Z,1510155888.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T15:44:48.765Z,1510155888.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:49.461Z,1510155889.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T15:44:49.462Z,1510155889.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:49.614Z,1510155889.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-08T15:44:49.615Z,1510155889.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:50.011Z,1510155890.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-08T15:44:50.011Z,1510155890.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:50.412Z,1510155890.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-08T15:44:50.413Z,1510155890.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:50.811Z,1510155890.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-08T15:44:50.812Z,1510155890.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:51.207Z,1510155891.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-08T15:44:51.208Z,1510155891.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:51.596Z,1510155891.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T15:44:51.597Z,1510155891.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:51.000Z,1510155892.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-08T15:44:52.001Z,1510155892.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:52.415Z,1510155892.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:52.795Z,1510155892.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:53.209Z,1510155893.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:53.892Z,1510155893.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:54.051Z,1510155894.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:54.446Z,1510155894.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:54.849Z,1510155894.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:54.937Z,1510155894.937 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:44:54.937Z,1510155894.937 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T15:44:54.989Z,1510155894.989 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:44:54.989Z,1510155894.989 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:44:54.989Z,1510155894.989 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:44:54.989Z,1510155894.989 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T15:44:54.989Z,1510155894.989 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:44:55.272Z,1510155895.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:55.365Z,1510155895.365 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:44:55.393Z,1510155895.393 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:44:55.476Z,1510155895.476 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:44:55.657Z,1510155895.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:56.064Z,1510155896.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:56.463Z,1510155896.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:56.899Z,1510155896.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:56.986Z,1510155896.986 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:44:56.987Z,1510155896.987 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T15:44:57.093Z,1510155897.093 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:44:57.093Z,1510155897.093 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:44:57.093Z,1510155897.093 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:44:57.093Z,1510155897.093 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T15:44:57.093Z,1510155897.093 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:44:57.497Z,1510155897.497 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:44:57.611Z,1510155897.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:57.621Z,1510155897.621 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:44:57.725Z,1510155897.725 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:44:57.805Z,1510155897.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:58.199Z,1510155898.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:58.600Z,1510155898.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:58.998Z,1510155898.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:59.086Z,1510155899.086 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:44:59.086Z,1510155899.086 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T15:44:59.237Z,1510155899.237 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:44:59.237Z,1510155899.237 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:44:59.237Z,1510155899.237 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:44:59.237Z,1510155899.237 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T15:44:59.237Z,1510155899.237 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:44:59.377Z,1510155899.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:59.477Z,1510155899.477 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:44:59.641Z,1510155899.641 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:44:59.787Z,1510155899.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:44:59.790Z,1510155899.790 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:45:00.215Z,1510155900.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:00.579Z,1510155900.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:00.987Z,1510155900.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:01.089Z,1510155901.089 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:45:01.089Z,1510155901.089 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T15:45:01.413Z,1510155901.413 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:45:01.413Z,1510155901.413 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:45:01.413Z,1510155901.413 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:45:01.414Z,1510155901.414 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T15:45:01.414Z,1510155901.414 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:45:01.691Z,1510155901.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:01.789Z,1510155901.789 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:45:01.818Z,1510155901.818 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:45:01.910Z,1510155901.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:02.002Z,1510155902.002 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:45:02.255Z,1510155902.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:02.656Z,1510155902.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:03.051Z,1510155903.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:03.440Z,1510155903.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:03.521Z,1510155903.521 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:45:03.521Z,1510155903.521 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T15:45:03.621Z,1510155903.621 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:45:03.621Z,1510155903.621 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:45:03.621Z,1510155903.621 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:45:03.621Z,1510155903.621 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T15:45:03.621Z,1510155903.621 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:45:03.849Z,1510155903.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:03.933Z,1510155903.933 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:45:03.933Z,1510155903.933 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:45:04.025Z,1510155904.025 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:45:04.114Z,1510155904.114 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:45:04.281Z,1510155904.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:04.649Z,1510155904.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:05.376Z,1510155905.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:05.536Z,1510155905.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:05.933Z,1510155905.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:06.334Z,1510155906.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:06.736Z,1510155906.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:07.130Z,1510155907.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:07.533Z,1510155907.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:07.910Z,1510155907.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:08.340Z,1510155908.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:08.781Z,1510155908.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:09.230Z,1510155909.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:10.375Z,1510155910.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:10.511Z,1510155910.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:10.914Z,1510155910.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:11.315Z,1510155911.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:11.717Z,1510155911.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:12.109Z,1510155912.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:12.512Z,1510155912.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:12.914Z,1510155912.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:13.326Z,1510155913.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:13.719Z,1510155913.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:14.380Z,1510155914.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:14.520Z,1510155914.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:14.874Z,1510155914.874 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T15:45:14.874Z,1510155914.874 [NAL9602] Data Fault, FailCount= 4
2017-11-08T15:45:14.874Z,1510155914.874 [NAL9602](ERROR): Data Fault
2017-11-08T15:45:14.939Z,1510155914.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:15.025Z,1510155915.025 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T15:45:15.275Z,1510155915.275 [NAL9602](INFO): Powering down
2017-11-08T15:45:15.322Z,1510155915.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:15.739Z,1510155915.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:16.114Z,1510155916.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:16.200Z,1510155916.200 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T15:45:16.200Z,1510155916.200 [NAL9602] No Fault, FailCount= 4
2017-11-08T15:45:16.519Z,1510155916.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:16.920Z,1510155916.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:17.343Z,1510155917.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:17.725Z,1510155917.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:18.120Z,1510155918.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:18.551Z,1510155918.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:18.918Z,1510155918.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:19.333Z,1510155919.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:19.724Z,1510155919.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:20.118Z,1510155920.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:20.524Z,1510155920.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:20.926Z,1510155920.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:21.323Z,1510155921.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:21.730Z,1510155921.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:22.127Z,1510155922.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:22.506Z,1510155922.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:22.906Z,1510155922.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:23.330Z,1510155923.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:23.730Z,1510155923.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:24.101Z,1510155924.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:24.511Z,1510155924.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:24.910Z,1510155924.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:25.310Z,1510155925.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:25.721Z,1510155925.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:26.106Z,1510155926.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:26.519Z,1510155926.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:26.912Z,1510155926.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:27.310Z,1510155927.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:27.739Z,1510155927.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:28.113Z,1510155928.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:28.511Z,1510155928.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:28.905Z,1510155928.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:29.310Z,1510155929.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:29.720Z,1510155929.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:30.110Z,1510155930.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:30.510Z,1510155930.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:30.910Z,1510155930.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:31.315Z,1510155931.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:31.711Z,1510155931.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:32.110Z,1510155932.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:32.511Z,1510155932.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:32.914Z,1510155932.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:33.311Z,1510155933.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:33.706Z,1510155933.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:34.115Z,1510155934.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:34.513Z,1510155934.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:34.911Z,1510155934.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:35.316Z,1510155935.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:35.711Z,1510155935.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:36.113Z,1510155936.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:36.512Z,1510155936.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:36.911Z,1510155936.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:37.308Z,1510155937.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:37.720Z,1510155937.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:38.116Z,1510155938.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:38.548Z,1510155938.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:38.911Z,1510155938.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:39.313Z,1510155939.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:39.749Z,1510155939.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:40.110Z,1510155940.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:40.547Z,1510155940.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:40.915Z,1510155940.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:41.347Z,1510155941.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:41.713Z,1510155941.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:42.108Z,1510155942.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:42.514Z,1510155942.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:42.913Z,1510155942.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:43.312Z,1510155943.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:43.712Z,1510155943.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:44.114Z,1510155944.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:44.512Z,1510155944.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:44.911Z,1510155944.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:45.312Z,1510155945.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:45.675Z,1510155945.675 [NAL9602](INFO): Powering up NAL9602
2017-11-08T15:45:45.718Z,1510155945.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:46.112Z,1510155946.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:46.513Z,1510155946.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:46.911Z,1510155946.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:47.314Z,1510155947.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:47.719Z,1510155947.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:48.111Z,1510155948.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:48.511Z,1510155948.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:48.953Z,1510155948.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:49.401Z,1510155949.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:49.770Z,1510155949.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:50.113Z,1510155950.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:50.514Z,1510155950.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:50.912Z,1510155950.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:51.312Z,1510155951.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:51.712Z,1510155951.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:52.114Z,1510155952.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:52.513Z,1510155952.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:52.913Z,1510155952.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:53.311Z,1510155953.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:53.717Z,1510155953.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:54.112Z,1510155954.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:54.512Z,1510155954.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:54.912Z,1510155954.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:55.319Z,1510155955.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:55.712Z,1510155955.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:56.119Z,1510155956.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:56.523Z,1510155956.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:56.879Z,1510155956.879 [NAL9602](INFO): NAL9602 initialized
2017-11-08T15:45:56.922Z,1510155956.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:57.316Z,1510155957.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:57.727Z,1510155957.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:58.122Z,1510155958.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:58.547Z,1510155958.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:58.923Z,1510155958.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:59.313Z,1510155959.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:45:59.714Z,1510155959.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:00.144Z,1510155960.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:00.572Z,1510155960.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:01.196Z,1510155961.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:01.347Z,1510155961.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:01.799Z,1510155961.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:02.156Z,1510155962.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:02.564Z,1510155962.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:02.939Z,1510155962.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:03.383Z,1510155963.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:03.734Z,1510155963.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:04.195Z,1510155964.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:04.539Z,1510155964.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:04.965Z,1510155964.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:05.631Z,1510155965.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:05.776Z,1510155965.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:06.180Z,1510155966.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:06.580Z,1510155966.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:06.975Z,1510155966.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:07.368Z,1510155967.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:07.776Z,1510155967.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:08.186Z,1510155968.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:08.587Z,1510155968.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:09.358Z,1510155969.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:09.519Z,1510155969.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:09.917Z,1510155969.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:10.315Z,1510155970.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:10.722Z,1510155970.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:11.096Z,1510155971.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:11.495Z,1510155971.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:11.928Z,1510155971.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:12.331Z,1510155972.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:12.716Z,1510155972.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:13.381Z,1510155973.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:13.535Z,1510155973.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:13.926Z,1510155973.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:14.325Z,1510155974.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:14.735Z,1510155974.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:15.120Z,1510155975.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:15.520Z,1510155975.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:15.935Z,1510155975.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:16.324Z,1510155976.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:16.990Z,1510155976.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:17.147Z,1510155977.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:17.535Z,1510155977.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:17.939Z,1510155977.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:18.338Z,1510155978.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:18.722Z,1510155978.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:19.126Z,1510155979.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:19.527Z,1510155979.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:19.943Z,1510155979.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:20.335Z,1510155980.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:20.739Z,1510155980.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:21.407Z,1510155981.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:21.579Z,1510155981.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:21.978Z,1510155981.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:22.378Z,1510155982.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:22.801Z,1510155982.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:23.160Z,1510155983.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:23.555Z,1510155983.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:24.007Z,1510155984.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:24.381Z,1510155984.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:25.080Z,1510155985.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:25.231Z,1510155985.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:25.651Z,1510155985.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:26.019Z,1510155986.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:26.417Z,1510155986.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:26.808Z,1510155986.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:27.205Z,1510155987.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:27.609Z,1510155987.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:28.038Z,1510155988.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:28.407Z,1510155988.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:28.817Z,1510155988.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:29.495Z,1510155989.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:29.644Z,1510155989.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:30.059Z,1510155990.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:30.468Z,1510155990.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:30.851Z,1510155990.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:31.262Z,1510155991.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:31.638Z,1510155991.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:32.058Z,1510155992.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:32.457Z,1510155992.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:33.117Z,1510155993.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:33.289Z,1510155993.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:33.741Z,1510155993.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:34.095Z,1510155994.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:34.496Z,1510155994.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:34.900Z,1510155994.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:35.295Z,1510155995.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:35.672Z,1510155995.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:36.111Z,1510155996.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:36.474Z,1510155996.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:36.897Z,1510155996.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:37.593Z,1510155997.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:37.733Z,1510155997.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:38.152Z,1510155998.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:38.552Z,1510155998.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:38.949Z,1510155998.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:39.348Z,1510155999.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:39.748Z,1510155999.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:40.160Z,1510156000.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:40.555Z,1510156000.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:41.214Z,1510156001.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:41.341Z,1510156001.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:41.753Z,1510156001.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:42.163Z,1510156002.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:42.556Z,1510156002.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:42.952Z,1510156002.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:43.352Z,1510156003.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:43.752Z,1510156003.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:44.163Z,1510156004.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:44.575Z,1510156004.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:44.964Z,1510156004.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:45.632Z,1510156005.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:45.825Z,1510156005.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:46.203Z,1510156006.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:46.604Z,1510156006.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:47.027Z,1510156007.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:47.396Z,1510156007.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:47.819Z,1510156007.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:48.211Z,1510156008.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:48.599Z,1510156008.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:49.302Z,1510156009.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:49.463Z,1510156009.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:49.860Z,1510156009.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:50.259Z,1510156010.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:50.661Z,1510156010.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:51.056Z,1510156011.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:51.455Z,1510156011.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:51.856Z,1510156011.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:52.267Z,1510156012.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:52.638Z,1510156012.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:53.067Z,1510156013.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:53.729Z,1510156013.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:53.871Z,1510156013.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:54.271Z,1510156014.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:54.665Z,1510156014.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:55.064Z,1510156015.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:55.462Z,1510156015.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:55.887Z,1510156015.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:56.275Z,1510156016.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:56.670Z,1510156016.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:57.359Z,1510156017.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:57.517Z,1510156017.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:57.917Z,1510156017.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:58.316Z,1510156018.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:58.713Z,1510156018.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:59.114Z,1510156019.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:59.509Z,1510156019.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:46:59.924Z,1510156019.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:00.313Z,1510156020.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:00.708Z,1510156020.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:01.116Z,1510156021.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:01.782Z,1510156021.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:01.956Z,1510156021.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:02.362Z,1510156022.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:02.763Z,1510156022.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:03.162Z,1510156023.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:03.535Z,1510156023.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:03.939Z,1510156023.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:04.337Z,1510156024.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:04.737Z,1510156024.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:05.173Z,1510156025.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:05.547Z,1510156025.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:06.315Z,1510156026.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:06.483Z,1510156026.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:06.858Z,1510156026.858 [PNI_TCM](ERROR): CRC does not match. Expected:0x24010 got:0x22296
2017-11-08T15:47:06.879Z,1510156026.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:07.300Z,1510156027.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:07.682Z,1510156027.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:08.083Z,1510156028.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:08.457Z,1510156028.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:08.879Z,1510156028.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:09.285Z,1510156029.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:09.674Z,1510156029.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:10.080Z,1510156030.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:10.743Z,1510156030.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:10.883Z,1510156030.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:11.291Z,1510156031.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:11.682Z,1510156031.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:12.087Z,1510156032.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:12.485Z,1510156032.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:12.895Z,1510156032.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:13.282Z,1510156033.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:13.961Z,1510156033.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:14.112Z,1510156034.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:14.537Z,1510156034.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:14.939Z,1510156034.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:15.339Z,1510156035.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:15.736Z,1510156035.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:16.149Z,1510156036.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:16.536Z,1510156036.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:16.951Z,1510156036.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:17.339Z,1510156037.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:17.741Z,1510156037.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:18.444Z,1510156038.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:18.572Z,1510156038.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:19.005Z,1510156039.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:19.381Z,1510156039.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:19.804Z,1510156039.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:20.174Z,1510156040.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:20.575Z,1510156040.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:21.005Z,1510156041.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:21.387Z,1510156041.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:22.079Z,1510156042.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:22.225Z,1510156042.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:22.634Z,1510156042.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:23.030Z,1510156043.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:23.431Z,1510156043.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:23.826Z,1510156043.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:24.221Z,1510156044.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:24.627Z,1510156044.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:25.049Z,1510156045.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:25.427Z,1510156045.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:25.833Z,1510156045.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:26.529Z,1510156046.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:26.667Z,1510156046.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:27.069Z,1510156047.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:27.472Z,1510156047.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:27.868Z,1510156047.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:28.280Z,1510156048.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:28.644Z,1510156048.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:29.110Z,1510156049.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:29.469Z,1510156049.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:30.138Z,1510156050.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:30.287Z,1510156050.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:30.688Z,1510156050.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:31.083Z,1510156051.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:31.479Z,1510156051.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:31.879Z,1510156051.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:32.271Z,1510156052.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:32.678Z,1510156052.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:33.093Z,1510156053.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:33.472Z,1510156053.472 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:33.472Z,1510156053.472 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48
2017-11-08T15:47:33.472Z,1510156053.472 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T15:47:33.474Z,1510156053.474 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:33.474Z,1510156053.474 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48
2017-11-08T15:47:33.474Z,1510156053.474 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T15:47:33.475Z,1510156053.475 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:33.476Z,1510156053.476 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 48
2017-11-08T15:47:33.476Z,1510156053.476 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T15:47:33.553Z,1510156053.553 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T15:47:33.553Z,1510156053.553 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T15:47:33.553Z,1510156053.553 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T15:47:33.965Z,1510156053.965 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T15:47:33.965Z,1510156053.965 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48
2017-11-08T15:47:33.965Z,1510156053.965 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T15:47:33.965Z,1510156053.965 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48
2017-11-08T15:47:33.966Z,1510156053.966 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T15:47:33.966Z,1510156053.966 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 48
2017-11-08T15:47:34.556Z,1510156054.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T15:47:34.556Z,1510156054.556 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:47:34.557Z,1510156054.557 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:47:34.557Z,1510156054.557 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T15:47:34.557Z,1510156054.557 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:47:34.558Z,1510156054.558 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:47:34.558Z,1510156054.558 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T15:47:34.558Z,1510156054.558 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:47:34.559Z,1510156054.559 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:47:34.741Z,1510156054.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2017-11-08T15:47:34.742Z,1510156054.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:35.135Z,1510156055.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2017-11-08T15:47:35.136Z,1510156055.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:35.536Z,1510156055.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2017-11-08T15:47:35.537Z,1510156055.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:35.936Z,1510156055.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2017-11-08T15:47:35.937Z,1510156055.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:36.338Z,1510156056.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2017-11-08T15:47:36.339Z,1510156056.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:36.715Z,1510156056.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T15:47:36.716Z,1510156056.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:37.182Z,1510156057.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2017-11-08T15:47:37.183Z,1510156057.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:37.543Z,1510156057.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-08T15:47:37.544Z,1510156057.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:38.201Z,1510156058.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2017-11-08T15:47:38.202Z,1510156058.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:38.341Z,1510156058.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-08T15:47:38.342Z,1510156058.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:38.748Z,1510156058.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-08T15:47:38.749Z,1510156058.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:39.147Z,1510156059.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-08T15:47:39.148Z,1510156059.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:39.544Z,1510156059.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-08T15:47:39.545Z,1510156059.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:39.942Z,1510156059.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-08T15:47:39.943Z,1510156059.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:40.337Z,1510156060.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T15:47:40.337Z,1510156060.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:40.743Z,1510156060.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-08T15:47:40.744Z,1510156060.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:41.155Z,1510156061.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T15:47:41.156Z,1510156061.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:41.536Z,1510156061.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T15:47:41.537Z,1510156061.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:41.949Z,1510156061.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T15:47:41.950Z,1510156061.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:42.633Z,1510156062.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T15:47:42.633Z,1510156062.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:42.791Z,1510156062.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T15:47:42.792Z,1510156062.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:43.188Z,1510156063.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T15:47:43.189Z,1510156063.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:43.587Z,1510156063.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T15:47:43.588Z,1510156063.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:43.986Z,1510156063.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T15:47:43.987Z,1510156063.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:44.360Z,1510156064.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T15:47:44.361Z,1510156064.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:44.759Z,1510156064.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T15:47:44.760Z,1510156064.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:45.193Z,1510156065.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T15:47:45.194Z,1510156065.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:45.583Z,1510156065.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T15:47:45.584Z,1510156065.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:46.244Z,1510156066.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T15:47:46.245Z,1510156066.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:46.398Z,1510156066.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T15:47:46.399Z,1510156066.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:46.796Z,1510156066.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T15:47:46.797Z,1510156066.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:47.199Z,1510156067.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T15:47:47.200Z,1510156067.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:47.597Z,1510156067.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T15:47:47.598Z,1510156067.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:47.992Z,1510156067.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T15:47:47.997Z,1510156067.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:48.400Z,1510156068.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T15:47:48.401Z,1510156068.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:48.772Z,1510156068.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T15:47:48.773Z,1510156068.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:49.246Z,1510156069.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-08T15:47:49.247Z,1510156069.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:49.573Z,1510156069.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T15:47:49.574Z,1510156069.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:49.999Z,1510156069.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T15:47:49.000Z,1510156070.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:50.696Z,1510156070.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T15:47:50.697Z,1510156070.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:50.854Z,1510156070.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-08T15:47:50.855Z,1510156070.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:51.289Z,1510156071.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-08T15:47:51.290Z,1510156071.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:51.661Z,1510156071.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-08T15:47:51.662Z,1510156071.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:52.049Z,1510156072.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-08T15:47:52.050Z,1510156072.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:52.433Z,1510156072.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-08T15:47:52.434Z,1510156072.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:52.836Z,1510156072.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-08T15:47:52.837Z,1510156072.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:53.264Z,1510156073.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-08T15:47:53.265Z,1510156073.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:53.668Z,1510156073.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:54.381Z,1510156074.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:54.504Z,1510156074.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:54.927Z,1510156074.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:55.323Z,1510156075.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:55.721Z,1510156075.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:56.117Z,1510156076.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:56.517Z,1510156076.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:56.935Z,1510156076.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:57.317Z,1510156077.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:57.717Z,1510156077.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:58.125Z,1510156078.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:58.793Z,1510156078.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:58.942Z,1510156078.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:59.413Z,1510156079.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:47:59.770Z,1510156079.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:00.170Z,1510156080.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:00.548Z,1510156080.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:00.948Z,1510156080.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:01.348Z,1510156081.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:01.772Z,1510156081.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:02.191Z,1510156082.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:02.577Z,1510156082.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:03.240Z,1510156083.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:03.380Z,1510156083.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:03.783Z,1510156083.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:04.186Z,1510156084.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:04.595Z,1510156084.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:04.963Z,1510156084.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:05.362Z,1510156085.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:05.764Z,1510156085.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:06.203Z,1510156086.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:06.561Z,1510156086.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:06.989Z,1510156086.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:07.659Z,1510156087.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:07.812Z,1510156087.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:08.206Z,1510156088.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:08.606Z,1510156088.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:08.000Z,1510156089.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:09.393Z,1510156089.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:09.799Z,1510156089.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:10.254Z,1510156090.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:10.598Z,1510156090.598 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T15:48:10.598Z,1510156090.598 [BPC1] Data Fault, FailCount= 1
2017-11-08T15:48:10.598Z,1510156090.598 [BPC1](ERROR): Data Fault
2017-11-08T15:48:10.607Z,1510156090.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:10.689Z,1510156090.689 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T15:48:11.306Z,1510156091.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:11.457Z,1510156091.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:11.860Z,1510156091.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:11.941Z,1510156091.941 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T15:48:11.941Z,1510156091.941 [BPC1] No Fault, FailCount= 1
2017-11-08T15:48:12.311Z,1510156092.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:12.656Z,1510156092.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:13.053Z,1510156093.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:13.450Z,1510156093.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:13.848Z,1510156093.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:14.268Z,1510156094.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:14.651Z,1510156094.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:15.056Z,1510156095.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:15.722Z,1510156095.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:15.867Z,1510156095.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:16.269Z,1510156096.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:16.665Z,1510156096.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:17.057Z,1510156097.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:17.456Z,1510156097.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:17.857Z,1510156097.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:18.267Z,1510156098.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:18.664Z,1510156098.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:19.322Z,1510156099.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:19.467Z,1510156099.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:19.860Z,1510156099.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:20.265Z,1510156100.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:20.699Z,1510156100.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:21.056Z,1510156101.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:21.461Z,1510156101.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:21.856Z,1510156101.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:22.278Z,1510156102.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:22.656Z,1510156102.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:23.065Z,1510156103.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:23.729Z,1510156103.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:23.891Z,1510156103.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:24.288Z,1510156104.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:24.679Z,1510156104.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:25.087Z,1510156105.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:25.467Z,1510156105.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:25.866Z,1510156105.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:26.311Z,1510156106.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:26.687Z,1510156106.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:27.362Z,1510156107.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:27.520Z,1510156107.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:27.916Z,1510156107.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:28.319Z,1510156108.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:28.717Z,1510156108.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:29.107Z,1510156109.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:29.495Z,1510156109.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:29.929Z,1510156109.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:30.295Z,1510156110.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:30.715Z,1510156110.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:31.124Z,1510156111.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:31.835Z,1510156111.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:31.977Z,1510156111.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:32.377Z,1510156112.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:32.799Z,1510156112.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:33.176Z,1510156113.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:33.564Z,1510156113.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:33.983Z,1510156113.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:34.351Z,1510156114.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:34.791Z,1510156114.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:35.184Z,1510156115.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:35.585Z,1510156115.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:36.243Z,1510156116.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:36.387Z,1510156116.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:36.793Z,1510156116.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:37.196Z,1510156117.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:37.592Z,1510156117.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:37.990Z,1510156117.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:38.385Z,1510156118.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:38.789Z,1510156118.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:39.205Z,1510156119.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:39.590Z,1510156119.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:40.007Z,1510156120.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:40.687Z,1510156120.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:40.838Z,1510156120.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:41.248Z,1510156121.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:41.643Z,1510156121.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:42.046Z,1510156122.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:42.438Z,1510156122.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:42.851Z,1510156122.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:43.256Z,1510156123.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:43.650Z,1510156123.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:44.302Z,1510156124.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:44.453Z,1510156124.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:44.847Z,1510156124.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:45.257Z,1510156125.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:45.642Z,1510156125.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:46.045Z,1510156126.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:46.445Z,1510156126.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:46.830Z,1510156126.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:47.264Z,1510156127.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:47.619Z,1510156127.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:48.044Z,1510156128.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:48.722Z,1510156128.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:48.872Z,1510156128.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:49.295Z,1510156129.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:49.696Z,1510156129.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:50.099Z,1510156130.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:50.476Z,1510156130.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:50.901Z,1510156130.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:51.303Z,1510156131.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:51.953Z,1510156131.953 [PNI_TCM](ERROR): CRC does not match. Expected:0x7616 got:0x49600
2017-11-08T15:48:51.979Z,1510156131.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:52.139Z,1510156132.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:52.559Z,1510156132.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:52.963Z,1510156132.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:53.383Z,1510156133.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:53.736Z,1510156133.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:54.132Z,1510156134.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:54.533Z,1510156134.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:55.022Z,1510156135.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:55.337Z,1510156135.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:55.783Z,1510156135.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:56.422Z,1510156136.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:56.583Z,1510156136.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:56.966Z,1510156136.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:57.365Z,1510156137.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:57.766Z,1510156137.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:58.163Z,1510156138.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:58.563Z,1510156138.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:58.974Z,1510156138.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:48:59.368Z,1510156139.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:00.023Z,1510156140.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:00.164Z,1510156140.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:00.572Z,1510156140.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:00.963Z,1510156140.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:01.368Z,1510156141.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:01.767Z,1510156141.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:02.166Z,1510156142.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:02.544Z,1510156142.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:02.975Z,1510156142.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:03.342Z,1510156143.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:03.765Z,1510156143.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:04.438Z,1510156144.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:04.561Z,1510156144.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:05.001Z,1510156145.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:05.380Z,1510156145.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:05.777Z,1510156145.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:06.179Z,1510156146.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:06.577Z,1510156146.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:06.989Z,1510156146.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:07.391Z,1510156147.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:08.044Z,1510156148.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:08.177Z,1510156148.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:08.594Z,1510156148.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:08.993Z,1510156148.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:09.393Z,1510156149.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:09.791Z,1510156149.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:10.172Z,1510156150.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:10.568Z,1510156150.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:11.004Z,1510156151.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:11.372Z,1510156151.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:11.795Z,1510156151.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:12.467Z,1510156152.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:12.645Z,1510156152.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:13.043Z,1510156153.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:13.443Z,1510156153.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:13.842Z,1510156153.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:14.218Z,1510156154.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:14.619Z,1510156154.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:15.046Z,1510156155.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:15.444Z,1510156155.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:16.151Z,1510156156.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:16.307Z,1510156156.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:16.701Z,1510156156.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:17.121Z,1510156157.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:17.501Z,1510156157.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:17.919Z,1510156157.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:18.302Z,1510156158.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:18.731Z,1510156158.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:19.111Z,1510156159.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:19.503Z,1510156159.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:19.901Z,1510156159.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:20.570Z,1510156160.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:20.748Z,1510156160.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:21.150Z,1510156161.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:21.552Z,1510156161.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:21.945Z,1510156161.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:22.326Z,1510156162.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:22.727Z,1510156162.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:23.159Z,1510156163.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:23.553Z,1510156163.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:24.210Z,1510156164.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:24.359Z,1510156164.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:24.767Z,1510156164.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:25.159Z,1510156165.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:25.561Z,1510156165.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:25.956Z,1510156165.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:26.355Z,1510156166.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:26.771Z,1510156166.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:27.171Z,1510156167.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:27.542Z,1510156167.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:27.949Z,1510156167.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:28.640Z,1510156168.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:28.776Z,1510156168.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:29.184Z,1510156169.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:29.585Z,1510156169.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:29.979Z,1510156169.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:30.375Z,1510156170.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:30.772Z,1510156170.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:31.190Z,1510156171.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:31.591Z,1510156171.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:32.269Z,1510156172.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:32.450Z,1510156172.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:32.828Z,1510156172.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:33.223Z,1510156173.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:33.623Z,1510156173.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:34.030Z,1510156174.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:34.405Z,1510156174.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:34.808Z,1510156174.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:35.239Z,1510156175.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:35.629Z,1510156175.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:36.031Z,1510156176.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:36.700Z,1510156176.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:36.874Z,1510156176.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:37.280Z,1510156177.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:37.676Z,1510156177.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:38.054Z,1510156178.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:38.447Z,1510156178.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:38.899Z,1510156178.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:39.284Z,1510156179.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:39.685Z,1510156179.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:40.363Z,1510156180.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:40.512Z,1510156180.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:40.963Z,1510156180.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:41.331Z,1510156181.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:41.731Z,1510156181.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:42.109Z,1510156182.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:42.511Z,1510156182.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:42.937Z,1510156182.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:43.333Z,1510156183.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:43.711Z,1510156183.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:44.139Z,1510156184.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:44.795Z,1510156184.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:44.926Z,1510156184.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:45.337Z,1510156185.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:45.739Z,1510156185.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:46.142Z,1510156186.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:46.538Z,1510156186.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:46.942Z,1510156186.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:47.341Z,1510156187.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:48.002Z,1510156188.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:48.143Z,1510156188.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:48.552Z,1510156188.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:48.951Z,1510156188.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:49.387Z,1510156189.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:49.739Z,1510156189.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:50.143Z,1510156190.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:50.539Z,1510156190.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:50.957Z,1510156190.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:51.338Z,1510156191.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:51.751Z,1510156191.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:52.485Z,1510156192.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:52.615Z,1510156192.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:53.035Z,1510156193.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:53.437Z,1510156193.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:53.836Z,1510156193.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:54.239Z,1510156194.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:54.615Z,1510156194.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:55.048Z,1510156195.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:55.443Z,1510156195.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:56.103Z,1510156196.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:56.259Z,1510156196.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:56.651Z,1510156196.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:57.047Z,1510156197.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:57.452Z,1510156197.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:57.839Z,1510156197.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:58.243Z,1510156198.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:58.639Z,1510156198.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:59.060Z,1510156199.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:59.439Z,1510156199.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:49:59.860Z,1510156199.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:00.535Z,1510156200.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:00.687Z,1510156200.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:01.088Z,1510156201.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:01.515Z,1510156201.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:01.911Z,1510156201.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:02.268Z,1510156202.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:02.667Z,1510156202.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:03.101Z,1510156203.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:03.537Z,1510156203.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:04.151Z,1510156204.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:04.319Z,1510156204.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:04.707Z,1510156204.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:05.109Z,1510156205.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:08.195Z,1510156208.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:08.363Z,1510156208.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:08.738Z,1510156208.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:09.092Z,1510156209.092 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003423
2017-11-08T15:50:09.158Z,1510156209.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:09.802Z,1510156209.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:09.952Z,1510156209.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:13.064Z,1510156213.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:13.165Z,1510156213.165 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20171108T091248/Courier0096.lzma
2017-11-08T15:50:13.247Z,1510156213.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:13.622Z,1510156213.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:13.966Z,1510156213.966 [DataOverHttps](INFO): Moved sent file to Logs/20171108T091248/Courier0096.lzma.bak
2017-11-08T15:50:13.966Z,1510156213.966 [DataOverHttps](INFO): SBD MOMSN=5222775
2017-11-08T15:50:14.019Z,1510156214.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:14.762Z,1510156214.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:14.899Z,1510156214.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:17.993Z,1510156217.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:18.156Z,1510156218.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:18.548Z,1510156218.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:18.945Z,1510156218.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:19.344Z,1510156219.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:19.744Z,1510156219.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:22.867Z,1510156222.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:23.042Z,1510156223.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:23.379Z,1510156223.379 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20171108T132044/Courier0000.lzma
2017-11-08T15:50:23.449Z,1510156223.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:23.844Z,1510156223.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:24.177Z,1510156224.177 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132044/Courier0000.lzma.bak
2017-11-08T15:50:24.177Z,1510156224.177 [DataOverHttps](INFO): SBD MOMSN=5222777
2017-11-08T15:50:24.247Z,1510156224.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:24.920Z,1510156224.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:25.116Z,1510156225.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:28.170Z,1510156228.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:28.363Z,1510156228.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:28.754Z,1510156228.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:29.155Z,1510156229.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:29.530Z,1510156229.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:29.964Z,1510156229.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:33.022Z,1510156233.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:33.105Z,1510156233.105 [DataOverHttps](INFO): Sending 196 bytes from file Logs/20171108T132236/Courier0004.lzma
2017-11-08T15:50:33.180Z,1510156233.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:33.566Z,1510156233.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:35.139Z,1510156235.139 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0004.lzma.bak
2017-11-08T15:50:35.139Z,1510156235.139 [DataOverHttps](INFO): SBD MOMSN=5222780
2017-11-08T15:50:35.215Z,1510156235.215 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:35.215Z,1510156235.215 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49
2017-11-08T15:50:35.216Z,1510156235.216 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T15:50:35.261Z,1510156235.261 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:35.262Z,1510156235.262 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49
2017-11-08T15:50:35.262Z,1510156235.262 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T15:50:35.263Z,1510156235.263 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:35.264Z,1510156235.264 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 49
2017-11-08T15:50:35.264Z,1510156235.264 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T15:50:35.353Z,1510156235.353 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T15:50:35.353Z,1510156235.353 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T15:50:35.353Z,1510156235.353 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T15:50:35.850Z,1510156235.850 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T15:50:35.850Z,1510156235.850 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49
2017-11-08T15:50:35.850Z,1510156235.850 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T15:50:35.851Z,1510156235.851 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49
2017-11-08T15:50:35.851Z,1510156235.851 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T15:50:35.851Z,1510156235.851 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 49
2017-11-08T15:50:35.953Z,1510156235.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T15:50:35.953Z,1510156235.953 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:50:35.954Z,1510156235.954 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:50:35.954Z,1510156235.954 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T15:50:35.955Z,1510156235.955 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:50:35.955Z,1510156235.955 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:50:35.955Z,1510156235.955 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T15:50:35.956Z,1510156235.956 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:50:35.956Z,1510156235.956 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:50:36.327Z,1510156236.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.1 s old, using for 20.0 s.
2017-11-08T15:50:36.328Z,1510156236.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:39.439Z,1510156239.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2017-11-08T15:50:39.440Z,1510156239.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:39.616Z,1510156239.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T15:50:39.617Z,1510156239.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:39.986Z,1510156239.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T15:50:39.987Z,1510156239.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:40.384Z,1510156240.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T15:50:40.385Z,1510156240.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:40.791Z,1510156240.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T15:50:40.792Z,1510156240.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:41.185Z,1510156241.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T15:50:41.186Z,1510156241.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:44.283Z,1510156244.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2017-11-08T15:50:44.284Z,1510156244.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:44.370Z,1510156244.370 [DataOverHttps](INFO): Sending 205 bytes from file Logs/20171108T132236/Courier0008.lzma
2017-11-08T15:50:44.466Z,1510156244.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T15:50:44.467Z,1510156244.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:44.831Z,1510156244.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T15:50:44.832Z,1510156244.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:45.169Z,1510156245.169 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0008.lzma.bak
2017-11-08T15:50:45.169Z,1510156245.169 [DataOverHttps](INFO): SBD MOMSN=5222783
2017-11-08T15:50:45.224Z,1510156245.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T15:50:45.225Z,1510156245.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:46.239Z,1510156246.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2017-11-08T15:50:46.240Z,1510156246.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:46.383Z,1510156246.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T15:50:46.384Z,1510156246.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:49.499Z,1510156249.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2017-11-08T15:50:49.500Z,1510156249.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:49.683Z,1510156249.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T15:50:49.684Z,1510156249.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:50.074Z,1510156250.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T15:50:50.075Z,1510156250.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:50.454Z,1510156250.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T15:50:50.456Z,1510156250.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:50.859Z,1510156250.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T15:50:50.860Z,1510156250.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:51.387Z,1510156251.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-08T15:50:51.388Z,1510156251.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:51.699Z,1510156251.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T15:50:51.700Z,1510156251.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:54.750Z,1510156254.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2017-11-08T15:50:54.751Z,1510156254.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:54.902Z,1510156254.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-08T15:50:54.903Z,1510156254.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:55.243Z,1510156255.243 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20171108T091248/Express0097.lzma
2017-11-08T15:50:55.335Z,1510156255.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:55.688Z,1510156255.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:56.041Z,1510156256.041 [DataOverHttps](INFO): Moved sent file to Logs/20171108T091248/Express0097.lzma.bak
2017-11-08T15:50:56.042Z,1510156256.042 [DataOverHttps](INFO): SBD MOMSN=5222788
2017-11-08T15:50:56.130Z,1510156256.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:57.137Z,1510156257.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:50:57.295Z,1510156257.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:00.382Z,1510156260.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:00.512Z,1510156260.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:00.936Z,1510156260.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:01.339Z,1510156261.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:01.736Z,1510156261.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:02.140Z,1510156262.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:05.250Z,1510156265.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:05.349Z,1510156265.349 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20171108T132044/Express0001.lzma
2017-11-08T15:51:05.420Z,1510156265.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:05.808Z,1510156265.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:06.149Z,1510156266.149 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132044/Express0001.lzma.bak
2017-11-08T15:51:06.149Z,1510156266.149 [DataOverHttps](INFO): SBD MOMSN=5222790
2017-11-08T15:51:06.204Z,1510156266.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:07.124Z,1510156267.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:07.300Z,1510156267.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:10.420Z,1510156270.420 [PNI_TCM](ERROR): CRC does not match. Expected:0x5760 got:0x1048
2017-11-08T15:51:10.420Z,1510156270.420 [PNI_TCM](ERROR): CRC does not match. Expected:0x778 got:0x996
2017-11-08T15:51:10.420Z,1510156270.420 [PNI_TCM](ERROR): CRC does not match. Expected:0x41671 got:0x897
2017-11-08T15:51:10.421Z,1510156270.421 [PNI_TCM](ERROR): CRC does not match. Expected:0x57588 got:0x1011
2017-11-08T15:51:10.421Z,1510156270.421 [PNI_TCM](ERROR): CRC does not match. Expected:0x10744 got:0x1023
2017-11-08T15:51:10.422Z,1510156270.422 [PNI_TCM](ERROR): CRC does not match. Expected:0x46950 got:0x1051
2017-11-08T15:51:10.422Z,1510156270.422 [PNI_TCM](ERROR): CRC does not match. Expected:0x39023 got:0x1096
2017-11-08T15:51:10.486Z,1510156270.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:10.622Z,1510156270.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:11.026Z,1510156271.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:11.418Z,1510156271.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:11.823Z,1510156271.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:12.219Z,1510156272.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:15.348Z,1510156275.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:15.442Z,1510156275.442 [DataOverHttps](INFO): Sending 674 bytes from file Logs/20171108T132236/Express0001.lzma
2017-11-08T15:51:15.542Z,1510156275.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:15.900Z,1510156275.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:16.241Z,1510156276.241 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0001.lzma.bak
2017-11-08T15:51:16.242Z,1510156276.242 [DataOverHttps](INFO): SBD MOMSN=5222792
2017-11-08T15:51:16.313Z,1510156276.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:17.272Z,1510156277.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:17.424Z,1510156277.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:20.533Z,1510156280.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:20.716Z,1510156280.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:21.106Z,1510156281.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:21.520Z,1510156281.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:21.888Z,1510156281.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:22.327Z,1510156282.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:25.407Z,1510156285.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:25.567Z,1510156285.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:25.908Z,1510156285.908 [DataOverHttps](INFO): Sending 176 bytes from file Logs/20171108T132236/Express0005.lzma
2017-11-08T15:51:25.963Z,1510156285.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:26.361Z,1510156286.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:26.705Z,1510156286.705 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0005.lzma.bak
2017-11-08T15:51:26.705Z,1510156286.705 [DataOverHttps](INFO): SBD MOMSN=5222810
2017-11-08T15:51:26.768Z,1510156286.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:27.713Z,1510156287.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:27.879Z,1510156287.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:31.004Z,1510156291.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:31.167Z,1510156291.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:31.560Z,1510156291.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:31.963Z,1510156291.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:32.360Z,1510156292.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:32.760Z,1510156292.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:35.830Z,1510156295.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:35.915Z,1510156295.915 [DataOverHttps](INFO): Sending 688 bytes from file Logs/20171108T132236/Express0009.lzma
2017-11-08T15:51:36.005Z,1510156296.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:36.371Z,1510156296.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:36.713Z,1510156296.713 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0009.lzma.bak
2017-11-08T15:51:36.713Z,1510156296.713 [DataOverHttps](INFO): SBD MOMSN=5222814
2017-11-08T15:51:36.787Z,1510156296.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:37.690Z,1510156297.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:37.709Z,1510156297.709 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T15:51:37.709Z,1510156297.709 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T15:51:37.709Z,1510156297.709 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T15:51:37.860Z,1510156297.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:40.971Z,1510156300.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:41.140Z,1510156301.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:41.528Z,1510156301.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:41.921Z,1510156301.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:42.323Z,1510156302.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:42.721Z,1510156302.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:43.177Z,1510156303.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:43.528Z,1510156303.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:44.059Z,1510156304.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:44.366Z,1510156304.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:44.844Z,1510156304.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:45.120Z,1510156305.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:45.525Z,1510156305.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:45.924Z,1510156305.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:46.330Z,1510156306.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:46.732Z,1510156306.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:47.135Z,1510156307.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:47.508Z,1510156307.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:47.908Z,1510156307.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:48.377Z,1510156308.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:48.730Z,1510156308.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:49.132Z,1510156309.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:49.509Z,1510156309.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:49.910Z,1510156309.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:50.336Z,1510156310.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:50.738Z,1510156310.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:51.136Z,1510156311.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:51.513Z,1510156311.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:51.904Z,1510156311.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:52.325Z,1510156312.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:52.741Z,1510156312.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:53.144Z,1510156313.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:53.510Z,1510156313.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:53.910Z,1510156313.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:54.314Z,1510156314.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:54.727Z,1510156314.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:55.122Z,1510156315.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:55.514Z,1510156315.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:55.911Z,1510156315.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:56.327Z,1510156316.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:56.718Z,1510156316.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:57.119Z,1510156317.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:57.515Z,1510156317.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:57.910Z,1510156317.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:58.317Z,1510156318.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:58.727Z,1510156318.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:59.119Z,1510156319.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:59.513Z,1510156319.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:51:59.915Z,1510156319.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:00.318Z,1510156320.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:00.721Z,1510156320.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:01.122Z,1510156321.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:01.514Z,1510156321.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:01.912Z,1510156321.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:02.322Z,1510156322.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:02.722Z,1510156322.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:03.123Z,1510156323.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:03.515Z,1510156323.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:03.910Z,1510156323.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:04.317Z,1510156324.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:04.722Z,1510156324.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:05.171Z,1510156325.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:05.557Z,1510156325.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:05.914Z,1510156325.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:06.359Z,1510156326.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:06.727Z,1510156326.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:07.163Z,1510156327.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:07.514Z,1510156327.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:07.915Z,1510156327.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:08.324Z,1510156328.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:08.727Z,1510156328.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:09.122Z,1510156329.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:09.515Z,1510156329.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:09.912Z,1510156329.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:10.322Z,1510156330.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:10.724Z,1510156330.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:11.121Z,1510156331.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:11.514Z,1510156331.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:11.917Z,1510156331.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:12.331Z,1510156332.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:12.727Z,1510156332.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:13.127Z,1510156333.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:13.515Z,1510156333.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:13.913Z,1510156333.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:14.324Z,1510156334.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:14.727Z,1510156334.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:15.123Z,1510156335.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:15.559Z,1510156335.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:15.909Z,1510156335.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:16.318Z,1510156336.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:16.723Z,1510156336.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:17.122Z,1510156337.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:17.515Z,1510156337.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:17.917Z,1510156337.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:18.323Z,1510156338.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:18.722Z,1510156338.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:19.123Z,1510156339.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:19.512Z,1510156339.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:19.914Z,1510156339.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:20.328Z,1510156340.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:20.727Z,1510156340.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:21.123Z,1510156341.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:21.513Z,1510156341.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:21.919Z,1510156341.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:22.319Z,1510156342.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:22.725Z,1510156342.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:23.123Z,1510156343.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:23.511Z,1510156343.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:23.912Z,1510156343.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:24.331Z,1510156344.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:24.726Z,1510156344.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:25.124Z,1510156345.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:25.521Z,1510156345.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:25.913Z,1510156345.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:26.324Z,1510156346.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:26.723Z,1510156346.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:27.123Z,1510156347.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:27.535Z,1510156347.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:27.939Z,1510156347.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:28.319Z,1510156348.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:28.760Z,1510156348.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:29.124Z,1510156349.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:29.536Z,1510156349.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:29.911Z,1510156349.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:30.324Z,1510156350.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:30.725Z,1510156350.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:31.132Z,1510156351.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:31.519Z,1510156351.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:31.913Z,1510156351.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:32.327Z,1510156352.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:32.723Z,1510156352.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:33.123Z,1510156353.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:33.520Z,1510156353.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:33.916Z,1510156353.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:34.323Z,1510156354.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:34.727Z,1510156354.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:35.123Z,1510156355.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:35.519Z,1510156355.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:35.923Z,1510156355.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:36.324Z,1510156356.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:36.726Z,1510156356.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:37.124Z,1510156357.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:37.527Z,1510156357.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:37.939Z,1510156357.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:38.328Z,1510156358.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:41.420Z,1510156361.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:41.595Z,1510156361.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:41.971Z,1510156361.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:42.368Z,1510156362.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:42.770Z,1510156362.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:43.171Z,1510156363.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:43.569Z,1510156363.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:43.968Z,1510156363.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:44.369Z,1510156364.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:44.768Z,1510156364.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:45.159Z,1510156365.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:45.548Z,1510156365.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:45.975Z,1510156365.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:46.371Z,1510156366.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:46.772Z,1510156366.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:47.173Z,1510156367.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:47.574Z,1510156367.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:47.951Z,1510156367.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:48.352Z,1510156368.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:48.748Z,1510156368.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:48.851Z,1510156368.851 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T15:52:49.151Z,1510156369.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:49.574Z,1510156369.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:50.039Z,1510156370.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:50.365Z,1510156370.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:50.795Z,1510156370.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:51.159Z,1510156371.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:51.587Z,1510156371.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:51.955Z,1510156371.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:52.365Z,1510156372.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:52.765Z,1510156372.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:53.166Z,1510156373.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:53.558Z,1510156373.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:53.953Z,1510156373.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:54.359Z,1510156374.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:54.755Z,1510156374.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:55.154Z,1510156375.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:55.590Z,1510156375.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:55.966Z,1510156375.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:56.367Z,1510156376.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:56.755Z,1510156376.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:57.155Z,1510156377.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:57.560Z,1510156377.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:57.954Z,1510156377.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:58.366Z,1510156378.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:58.768Z,1510156378.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:59.165Z,1510156379.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:59.559Z,1510156379.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:52:59.984Z,1510156379.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:00.353Z,1510156380.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:00.759Z,1510156380.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:01.159Z,1510156381.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:01.566Z,1510156381.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:01.966Z,1510156381.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:02.360Z,1510156382.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:02.760Z,1510156382.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:03.159Z,1510156383.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:03.555Z,1510156383.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:03.954Z,1510156383.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:04.366Z,1510156384.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:04.766Z,1510156384.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:05.159Z,1510156385.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:05.555Z,1510156385.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:05.955Z,1510156385.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:06.354Z,1510156386.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:06.760Z,1510156386.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:07.159Z,1510156387.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:07.563Z,1510156387.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:07.966Z,1510156387.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:08.365Z,1510156388.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:08.755Z,1510156388.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:09.155Z,1510156389.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:09.559Z,1510156389.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:09.955Z,1510156389.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:10.366Z,1510156390.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:10.790Z,1510156390.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:11.166Z,1510156391.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:11.603Z,1510156391.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:12.005Z,1510156392.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:12.355Z,1510156392.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:12.795Z,1510156392.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:13.157Z,1510156393.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:13.603Z,1510156393.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:13.966Z,1510156393.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:14.366Z,1510156394.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:14.763Z,1510156394.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:15.158Z,1510156395.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:15.558Z,1510156395.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:15.962Z,1510156395.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:16.366Z,1510156396.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:16.766Z,1510156396.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:17.163Z,1510156397.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:17.556Z,1510156397.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:17.957Z,1510156397.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:18.362Z,1510156398.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:18.757Z,1510156398.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:19.159Z,1510156399.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:19.571Z,1510156399.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:19.971Z,1510156399.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:20.366Z,1510156400.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:20.763Z,1510156400.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:21.163Z,1510156401.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:21.558Z,1510156401.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:21.990Z,1510156401.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:22.366Z,1510156402.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:22.766Z,1510156402.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:23.166Z,1510156403.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:23.558Z,1510156403.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:23.957Z,1510156403.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:24.360Z,1510156404.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:24.758Z,1510156404.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:25.158Z,1510156405.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:25.571Z,1510156405.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:25.971Z,1510156405.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:26.366Z,1510156406.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:26.760Z,1510156406.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:27.158Z,1510156407.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:27.558Z,1510156407.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:27.954Z,1510156407.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:28.366Z,1510156408.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:28.771Z,1510156408.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:29.166Z,1510156409.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:29.558Z,1510156409.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:29.959Z,1510156409.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:30.358Z,1510156410.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:30.759Z,1510156410.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:31.159Z,1510156411.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:31.567Z,1510156411.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:31.972Z,1510156411.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:32.371Z,1510156412.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:32.758Z,1510156412.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:33.159Z,1510156413.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:33.613Z,1510156413.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:33.984Z,1510156413.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:34.369Z,1510156414.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:34.797Z,1510156414.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:35.168Z,1510156415.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:35.588Z,1510156415.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:35.959Z,1510156415.959 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:35.959Z,1510156415.959 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50
2017-11-08T15:53:35.959Z,1510156415.959 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T15:53:35.961Z,1510156415.961 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:35.961Z,1510156415.961 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50
2017-11-08T15:53:35.961Z,1510156415.961 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T15:53:35.963Z,1510156415.963 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:35.963Z,1510156415.963 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 50
2017-11-08T15:53:35.963Z,1510156415.963 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T15:53:36.049Z,1510156416.049 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T15:53:36.049Z,1510156416.049 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T15:53:36.049Z,1510156416.049 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T15:53:36.441Z,1510156416.441 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T15:53:36.441Z,1510156416.441 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50
2017-11-08T15:53:36.441Z,1510156416.441 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T15:53:36.441Z,1510156416.441 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50
2017-11-08T15:53:36.442Z,1510156416.442 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T15:53:36.442Z,1510156416.442 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 50
2017-11-08T15:53:36.763Z,1510156416.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T15:53:36.763Z,1510156416.763 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:53:36.764Z,1510156416.764 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:53:36.764Z,1510156416.764 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T15:53:36.765Z,1510156416.765 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:53:36.766Z,1510156416.766 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:53:36.766Z,1510156416.766 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T15:53:36.766Z,1510156416.766 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:53:36.767Z,1510156416.767 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:53:37.155Z,1510156417.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T15:53:37.156Z,1510156417.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:37.577Z,1510156417.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T15:53:37.578Z,1510156417.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:37.984Z,1510156417.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T15:53:37.985Z,1510156417.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:38.376Z,1510156418.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T15:53:38.377Z,1510156418.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:41.442Z,1510156421.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-08T15:53:41.442Z,1510156421.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:41.586Z,1510156421.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T15:53:41.587Z,1510156421.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:41.989Z,1510156421.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T15:53:41.990Z,1510156421.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:42.386Z,1510156422.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T15:53:42.386Z,1510156422.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:42.787Z,1510156422.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T15:53:42.788Z,1510156422.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:43.183Z,1510156423.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T15:53:43.184Z,1510156423.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:43.577Z,1510156423.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T15:53:43.578Z,1510156423.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:43.998Z,1510156423.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T15:53:43.999Z,1510156423.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:44.385Z,1510156424.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T15:53:44.386Z,1510156424.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:44.785Z,1510156424.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T15:53:44.786Z,1510156424.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:45.182Z,1510156425.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T15:53:45.182Z,1510156425.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:45.575Z,1510156425.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T15:53:45.576Z,1510156425.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:45.960Z,1510156425.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T15:53:45.961Z,1510156425.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:46.363Z,1510156426.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T15:53:46.363Z,1510156426.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:46.760Z,1510156426.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T15:53:46.761Z,1510156426.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:47.159Z,1510156427.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T15:53:47.160Z,1510156427.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:47.593Z,1510156427.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T15:53:47.594Z,1510156427.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:47.992Z,1510156427.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T15:53:47.993Z,1510156427.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:48.391Z,1510156428.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T15:53:48.393Z,1510156428.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:48.765Z,1510156428.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T15:53:48.766Z,1510156428.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:49.167Z,1510156429.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T15:53:49.167Z,1510156429.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:49.571Z,1510156429.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T15:53:49.572Z,1510156429.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:49.965Z,1510156429.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T15:53:49.966Z,1510156429.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:50.395Z,1510156430.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T15:53:50.396Z,1510156430.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:50.795Z,1510156430.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T15:53:50.796Z,1510156430.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:51.177Z,1510156431.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T15:53:51.178Z,1510156431.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:51.566Z,1510156431.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T15:53:51.567Z,1510156431.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:51.971Z,1510156431.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T15:53:51.972Z,1510156431.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:52.365Z,1510156432.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T15:53:52.366Z,1510156432.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:52.766Z,1510156432.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T15:53:52.767Z,1510156432.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:53.175Z,1510156433.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T15:53:53.176Z,1510156433.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:53.573Z,1510156433.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T15:53:53.574Z,1510156433.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:53.977Z,1510156433.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T15:53:53.978Z,1510156433.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:54.373Z,1510156434.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T15:53:54.374Z,1510156434.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:54.767Z,1510156434.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T15:53:54.768Z,1510156434.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:55.170Z,1510156435.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T15:53:55.171Z,1510156435.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:55.600Z,1510156435.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T15:53:55.601Z,1510156435.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:56.022Z,1510156436.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:56.426Z,1510156436.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:56.784Z,1510156436.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:57.183Z,1510156437.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:57.611Z,1510156437.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:57.969Z,1510156437.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:58.403Z,1510156438.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:58.771Z,1510156438.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:59.174Z,1510156439.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:59.578Z,1510156439.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:53:59.978Z,1510156439.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:00.375Z,1510156440.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:00.768Z,1510156440.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:01.171Z,1510156441.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:01.570Z,1510156441.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:01.968Z,1510156441.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:02.383Z,1510156442.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:02.777Z,1510156442.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:03.178Z,1510156443.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:03.571Z,1510156443.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:03.974Z,1510156443.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:04.368Z,1510156444.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:04.771Z,1510156444.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:05.166Z,1510156445.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:05.578Z,1510156445.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:05.983Z,1510156445.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:06.375Z,1510156446.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:06.804Z,1510156446.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:07.170Z,1510156447.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:07.570Z,1510156447.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:07.968Z,1510156447.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:08.383Z,1510156448.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:08.783Z,1510156448.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:09.178Z,1510156449.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:09.571Z,1510156449.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:09.970Z,1510156449.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:10.369Z,1510156450.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:10.771Z,1510156450.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:11.182Z,1510156451.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:11.578Z,1510156451.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:11.984Z,1510156451.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:12.376Z,1510156452.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:12.773Z,1510156452.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:13.171Z,1510156453.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:13.571Z,1510156453.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:13.969Z,1510156453.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:14.381Z,1510156454.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:14.779Z,1510156454.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:15.178Z,1510156455.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:15.575Z,1510156455.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:15.967Z,1510156455.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:16.372Z,1510156456.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:16.772Z,1510156456.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:17.169Z,1510156457.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:17.579Z,1510156457.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:17.988Z,1510156457.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:18.419Z,1510156458.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:18.790Z,1510156458.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:19.172Z,1510156459.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:19.604Z,1510156459.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:19.970Z,1510156459.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:20.427Z,1510156460.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:20.784Z,1510156460.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:21.189Z,1510156461.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:21.560Z,1510156461.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:21.959Z,1510156461.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:22.363Z,1510156462.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:22.761Z,1510156462.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:23.161Z,1510156463.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:23.590Z,1510156463.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:23.986Z,1510156463.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:24.393Z,1510156464.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:24.768Z,1510156464.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:25.164Z,1510156465.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:25.568Z,1510156465.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:25.967Z,1510156465.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:26.386Z,1510156466.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:26.799Z,1510156466.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:27.199Z,1510156467.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:27.567Z,1510156467.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:27.966Z,1510156467.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:28.365Z,1510156468.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:28.792Z,1510156468.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:29.166Z,1510156469.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:29.589Z,1510156469.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:29.973Z,1510156469.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:30.398Z,1510156470.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:30.763Z,1510156470.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:31.171Z,1510156471.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:31.571Z,1510156471.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:31.967Z,1510156471.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:32.373Z,1510156472.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:32.778Z,1510156472.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:33.175Z,1510156473.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:33.571Z,1510156473.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:34.019Z,1510156474.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:34.367Z,1510156474.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:34.771Z,1510156474.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:35.166Z,1510156475.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:35.575Z,1510156475.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:35.976Z,1510156475.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:36.374Z,1510156476.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:36.765Z,1510156476.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:37.171Z,1510156477.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:37.569Z,1510156477.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:37.969Z,1510156477.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:38.377Z,1510156478.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:41.512Z,1510156481.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:41.687Z,1510156481.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:42.062Z,1510156482.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:42.483Z,1510156482.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:42.859Z,1510156482.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:43.280Z,1510156483.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:43.669Z,1510156483.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:44.067Z,1510156484.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:44.466Z,1510156484.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:44.863Z,1510156484.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:45.264Z,1510156485.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:45.664Z,1510156485.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:46.061Z,1510156486.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:46.463Z,1510156486.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:46.871Z,1510156486.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:47.271Z,1510156487.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:47.663Z,1510156487.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:48.060Z,1510156488.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:48.464Z,1510156488.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:48.863Z,1510156488.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:49.261Z,1510156489.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:49.670Z,1510156489.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:50.070Z,1510156490.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:50.469Z,1510156490.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:50.867Z,1510156490.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:51.257Z,1510156491.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:51.673Z,1510156491.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:52.064Z,1510156492.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:52.471Z,1510156492.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:52.886Z,1510156492.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:53.272Z,1510156493.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:53.670Z,1510156493.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:54.067Z,1510156494.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:54.464Z,1510156494.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:54.868Z,1510156494.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:55.270Z,1510156495.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:55.670Z,1510156495.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:56.083Z,1510156496.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:56.472Z,1510156496.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:56.867Z,1510156496.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:57.265Z,1510156497.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:57.669Z,1510156497.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:58.068Z,1510156498.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:58.476Z,1510156498.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:58.875Z,1510156498.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:59.283Z,1510156499.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:54:59.668Z,1510156499.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:00.068Z,1510156500.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:00.465Z,1510156500.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:00.869Z,1510156500.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:01.271Z,1510156501.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:01.673Z,1510156501.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:02.095Z,1510156502.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:02.491Z,1510156502.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:02.847Z,1510156502.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:03.291Z,1510156503.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:03.657Z,1510156503.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:03.757Z,1510156503.757 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:55:03.757Z,1510156503.757 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T15:55:03.961Z,1510156503.961 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:55:03.961Z,1510156503.961 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:55:03.961Z,1510156503.961 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:55:03.961Z,1510156503.961 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T15:55:03.961Z,1510156503.961 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:55:04.051Z,1510156504.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:04.133Z,1510156504.133 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:55:04.365Z,1510156504.365 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:55:04.524Z,1510156504.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:04.528Z,1510156504.528 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:55:04.885Z,1510156504.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:05.304Z,1510156505.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:05.684Z,1510156505.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:05.774Z,1510156505.774 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:55:05.774Z,1510156505.774 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T15:55:06.051Z,1510156506.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:06.141Z,1510156506.141 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:55:06.141Z,1510156506.141 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:55:06.141Z,1510156506.141 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:55:06.141Z,1510156506.141 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T15:55:06.141Z,1510156506.141 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:55:06.459Z,1510156506.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:06.545Z,1510156506.545 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:55:06.558Z,1510156506.558 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:55:06.644Z,1510156506.644 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:55:06.863Z,1510156506.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:07.284Z,1510156507.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:07.667Z,1510156507.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:08.066Z,1510156508.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:08.165Z,1510156508.165 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:55:08.165Z,1510156508.165 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T15:55:08.261Z,1510156508.261 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:55:08.261Z,1510156508.261 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:55:08.261Z,1510156508.261 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:55:08.261Z,1510156508.261 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T15:55:08.262Z,1510156508.262 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:55:08.478Z,1510156508.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:08.557Z,1510156508.557 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:55:08.665Z,1510156508.665 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:55:08.747Z,1510156508.747 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:55:08.883Z,1510156508.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:09.267Z,1510156509.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:09.661Z,1510156509.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:10.057Z,1510156510.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:10.141Z,1510156510.141 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:55:10.141Z,1510156510.141 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T15:55:10.361Z,1510156510.361 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:55:10.361Z,1510156510.361 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:55:10.361Z,1510156510.361 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:55:10.361Z,1510156510.361 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T15:55:10.361Z,1510156510.361 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:55:10.491Z,1510156510.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:10.577Z,1510156510.577 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:55:10.765Z,1510156510.765 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:55:10.904Z,1510156510.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:10.952Z,1510156510.952 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:55:11.268Z,1510156511.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:11.664Z,1510156511.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:12.065Z,1510156512.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:12.450Z,1510156512.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:12.537Z,1510156512.537 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T15:55:12.537Z,1510156512.537 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T15:55:12.573Z,1510156512.573 [Rowe_600LCM](INFO): Initializing
2017-11-08T15:55:12.573Z,1510156512.573 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T15:55:12.573Z,1510156512.573 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T15:55:12.574Z,1510156512.574 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T15:55:12.574Z,1510156512.574 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T15:55:12.865Z,1510156512.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:12.949Z,1510156512.949 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:55:12.949Z,1510156512.949 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T15:55:12.977Z,1510156512.977 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T15:55:13.072Z,1510156513.072 [Rowe_600LCM](INFO): Powering down
2017-11-08T15:55:13.306Z,1510156513.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:13.712Z,1510156513.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:14.072Z,1510156514.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:14.476Z,1510156514.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:14.864Z,1510156514.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:15.276Z,1510156515.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:15.657Z,1510156515.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:16.055Z,1510156516.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:16.467Z,1510156516.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:16.879Z,1510156516.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:17.268Z,1510156517.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:17.659Z,1510156517.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:18.059Z,1510156518.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:18.470Z,1510156518.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:18.856Z,1510156518.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:19.257Z,1510156519.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:19.667Z,1510156519.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:20.094Z,1510156520.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:20.475Z,1510156520.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:20.859Z,1510156520.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:21.261Z,1510156521.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:21.675Z,1510156521.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:22.056Z,1510156522.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:22.467Z,1510156522.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:22.873Z,1510156522.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:23.295Z,1510156523.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:23.655Z,1510156523.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:24.059Z,1510156524.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:24.508Z,1510156524.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:24.875Z,1510156524.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:25.256Z,1510156525.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:25.724Z,1510156525.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:26.078Z,1510156526.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:26.480Z,1510156526.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:26.888Z,1510156526.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:27.262Z,1510156527.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:27.681Z,1510156527.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:28.055Z,1510156528.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:28.468Z,1510156528.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:28.870Z,1510156528.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:29.267Z,1510156529.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:29.675Z,1510156529.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:30.061Z,1510156530.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:30.460Z,1510156530.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:30.859Z,1510156530.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:31.265Z,1510156531.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:31.667Z,1510156531.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:32.070Z,1510156532.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:32.466Z,1510156532.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:32.859Z,1510156532.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:33.254Z,1510156533.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:33.660Z,1510156533.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:34.063Z,1510156534.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:34.463Z,1510156534.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:34.868Z,1510156534.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:35.267Z,1510156535.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:35.658Z,1510156535.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:36.101Z,1510156536.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:36.455Z,1510156536.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:36.867Z,1510156536.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:37.262Z,1510156537.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:37.665Z,1510156537.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:38.075Z,1510156538.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:38.476Z,1510156538.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:41.530Z,1510156541.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:41.698Z,1510156541.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:42.103Z,1510156542.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:42.505Z,1510156542.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:42.905Z,1510156542.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:43.298Z,1510156543.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:43.688Z,1510156543.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:44.087Z,1510156544.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:44.492Z,1510156544.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:44.911Z,1510156544.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:45.311Z,1510156545.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:45.687Z,1510156545.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:46.082Z,1510156546.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:46.512Z,1510156546.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:46.920Z,1510156546.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:47.293Z,1510156547.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:47.697Z,1510156547.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:48.096Z,1510156548.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:48.543Z,1510156548.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:48.888Z,1510156548.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:49.295Z,1510156549.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:49.735Z,1510156549.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:50.117Z,1510156550.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:50.520Z,1510156550.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:50.892Z,1510156550.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:51.294Z,1510156551.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:51.697Z,1510156551.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:52.094Z,1510156552.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:52.491Z,1510156552.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:52.889Z,1510156552.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:53.292Z,1510156553.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:53.697Z,1510156553.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:54.096Z,1510156554.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:54.485Z,1510156554.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:54.887Z,1510156554.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:55.296Z,1510156555.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:55.693Z,1510156555.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:56.099Z,1510156556.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:56.490Z,1510156556.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:56.896Z,1510156556.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:57.293Z,1510156557.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:57.694Z,1510156557.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:58.095Z,1510156558.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:58.491Z,1510156558.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:58.914Z,1510156558.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:59.247Z,1510156559.247 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T15:55:59.248Z,1510156559.248 [NAL9602] Data Fault, FailCount= 5
2017-11-08T15:55:59.248Z,1510156559.248 [NAL9602](ERROR): Data Fault
2017-11-08T15:55:59.299Z,1510156559.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:59.389Z,1510156559.389 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T15:55:59.389Z,1510156559.389 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-11-08T15:55:59.646Z,1510156559.646 [NAL9602](INFO): Powering down
2017-11-08T15:55:59.695Z,1510156559.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:55:59.799Z,1510156559.799 [CBIT](INFO): Critical error at 20171108T155559
2017-11-08T15:56:00.088Z,1510156560.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:00.488Z,1510156560.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:00.887Z,1510156560.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:01.287Z,1510156561.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:01.687Z,1510156561.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:02.083Z,1510156562.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:02.487Z,1510156562.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:02.883Z,1510156562.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:03.299Z,1510156563.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:03.679Z,1510156563.679 [PNI_TCM](ERROR): CRC does not match. Expected:0x9567 got:0x49536
2017-11-08T15:56:03.722Z,1510156563.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:04.081Z,1510156564.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:04.483Z,1510156564.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:04.887Z,1510156564.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:05.288Z,1510156565.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:05.687Z,1510156565.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:06.084Z,1510156566.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:06.487Z,1510156566.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:06.883Z,1510156566.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:07.287Z,1510156567.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:07.684Z,1510156567.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:08.099Z,1510156568.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:08.478Z,1510156568.478 [PNI_TCM](ERROR): CRC does not match. Expected:0x1896 got:0x77
2017-11-08T15:56:08.521Z,1510156568.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:08.887Z,1510156568.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:09.284Z,1510156569.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:09.739Z,1510156569.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:10.088Z,1510156570.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:10.482Z,1510156570.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:10.937Z,1510156570.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:11.299Z,1510156571.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:11.672Z,1510156571.672 [PNI_TCM](ERROR): CRC does not match. Expected:0x39318 got:0x49408
2017-11-08T15:56:11.699Z,1510156571.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:12.123Z,1510156572.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:12.488Z,1510156572.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:12.919Z,1510156572.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:13.274Z,1510156573.274 [PNI_TCM](ERROR): CRC does not match. Expected:0x15019 got:0x49472
2017-11-08T15:56:13.300Z,1510156573.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:13.687Z,1510156573.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:14.083Z,1510156574.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:14.488Z,1510156574.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:14.883Z,1510156574.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:15.285Z,1510156575.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:15.688Z,1510156575.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:16.091Z,1510156576.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:16.482Z,1510156576.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:16.886Z,1510156576.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:17.288Z,1510156577.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:17.699Z,1510156577.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:18.077Z,1510156578.077 [PNI_TCM](ERROR): CRC does not match. Expected:0x48648 got:0x16833
2017-11-08T15:56:18.103Z,1510156578.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:18.481Z,1510156578.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:18.887Z,1510156578.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:19.288Z,1510156579.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:19.687Z,1510156579.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:20.087Z,1510156580.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:20.484Z,1510156580.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:20.887Z,1510156580.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:21.317Z,1510156581.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:21.688Z,1510156581.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:22.089Z,1510156582.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:22.491Z,1510156582.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:22.888Z,1510156582.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:23.287Z,1510156583.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:23.684Z,1510156583.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:24.088Z,1510156584.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:24.488Z,1510156584.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:24.884Z,1510156584.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:25.289Z,1510156585.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:25.688Z,1510156585.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:26.082Z,1510156586.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:26.491Z,1510156586.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:26.885Z,1510156586.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:27.285Z,1510156587.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:27.687Z,1510156587.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:28.083Z,1510156588.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:28.485Z,1510156588.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:28.891Z,1510156588.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:29.285Z,1510156589.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:29.685Z,1510156589.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:30.086Z,1510156590.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:30.485Z,1510156590.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:30.887Z,1510156590.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:31.283Z,1510156591.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:31.689Z,1510156591.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:32.140Z,1510156592.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:32.484Z,1510156592.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:32.883Z,1510156592.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:33.305Z,1510156593.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:33.686Z,1510156593.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:34.085Z,1510156594.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:34.530Z,1510156594.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:34.887Z,1510156594.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:35.323Z,1510156595.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:35.683Z,1510156595.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:36.082Z,1510156596.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:36.484Z,1510156596.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:36.884Z,1510156596.884 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:36.884Z,1510156596.884 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51
2017-11-08T15:56:36.884Z,1510156596.884 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T15:56:36.886Z,1510156596.886 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:36.886Z,1510156596.886 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51
2017-11-08T15:56:36.886Z,1510156596.886 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T15:56:36.888Z,1510156596.888 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:36.888Z,1510156596.888 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 51
2017-11-08T15:56:36.888Z,1510156596.888 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T15:56:36.961Z,1510156596.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T15:56:36.961Z,1510156596.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T15:56:36.962Z,1510156596.962 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T15:56:37.371Z,1510156597.371 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T15:56:37.371Z,1510156597.371 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51
2017-11-08T15:56:37.371Z,1510156597.371 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T15:56:37.371Z,1510156597.371 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51
2017-11-08T15:56:37.372Z,1510156597.372 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T15:56:37.372Z,1510156597.372 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 51
2017-11-08T15:56:37.682Z,1510156597.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T15:56:37.682Z,1510156597.682 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:56:37.682Z,1510156597.682 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:56:37.683Z,1510156597.683 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T15:56:37.683Z,1510156597.683 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:56:37.684Z,1510156597.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:56:37.684Z,1510156597.684 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T15:56:37.685Z,1510156597.685 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:56:37.685Z,1510156597.685 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:56:38.093Z,1510156598.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T15:56:38.094Z,1510156598.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:38.097Z,1510156598.097 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T15:56:38.097Z,1510156598.097 [Default:CheckIn:C.Wait] Stopped
2017-11-08T15:56:38.097Z,1510156598.097 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T15:56:38.097Z,1510156598.097 [Default:CheckIn:D] Running Loop=1
2017-11-08T15:56:38.488Z,1510156598.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T15:56:38.489Z,1510156598.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:38.492Z,1510156598.492 [Default:CheckIn:D] Stopped
2017-11-08T15:56:38.493Z,1510156598.493 [Default:CheckIn:E] Running Loop=1
2017-11-08T15:56:41.696Z,1510156601.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T15:56:41.697Z,1510156601.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:41.701Z,1510156601.701 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 149.958545 min 
2017-11-08T15:56:41.701Z,1510156601.701 [Default:CheckIn:E] Stopped
2017-11-08T15:56:41.701Z,1510156601.701 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T15:56:41.701Z,1510156601.701 [Default:CheckIn] Stopped
2017-11-08T15:56:41.701Z,1510156601.701 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T15:56:41.701Z,1510156601.701 [Default:CheckIn](INFO): Running loop #3
2017-11-08T15:56:41.702Z,1510156601.702 [Default:CheckIn] Running Loop=3
2017-11-08T15:56:41.702Z,1510156601.702 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T15:56:41.702Z,1510156601.702 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T15:56:41.851Z,1510156601.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2017-11-08T15:56:41.857Z,1510156601.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:42.231Z,1510156602.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-08T15:56:42.232Z,1510156602.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:42.631Z,1510156602.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-08T15:56:42.632Z,1510156602.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:43.025Z,1510156603.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-08T15:56:43.026Z,1510156603.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:43.462Z,1510156603.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-08T15:56:43.463Z,1510156603.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:43.822Z,1510156603.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T15:56:43.823Z,1510156603.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:44.226Z,1510156604.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-08T15:56:44.227Z,1510156604.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:44.622Z,1510156604.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T15:56:44.623Z,1510156604.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:45.022Z,1510156605.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T15:56:45.023Z,1510156605.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:45.421Z,1510156605.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T15:56:45.422Z,1510156605.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:45.820Z,1510156605.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T15:56:45.821Z,1510156605.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:46.221Z,1510156606.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T15:56:46.222Z,1510156606.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:46.620Z,1510156606.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T15:56:46.621Z,1510156606.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:47.021Z,1510156607.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T15:56:47.022Z,1510156607.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:47.426Z,1510156607.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T15:56:47.427Z,1510156607.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:47.826Z,1510156607.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T15:56:47.827Z,1510156607.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:48.221Z,1510156608.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T15:56:48.222Z,1510156608.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:48.667Z,1510156608.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2017-11-08T15:56:48.668Z,1510156608.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:49.022Z,1510156609.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T15:56:49.023Z,1510156609.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:49.422Z,1510156609.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T15:56:49.423Z,1510156609.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:49.823Z,1510156609.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T15:56:49.824Z,1510156609.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:50.224Z,1510156610.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T15:56:50.225Z,1510156610.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:50.624Z,1510156610.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T15:56:50.625Z,1510156610.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:51.023Z,1510156611.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T15:56:51.024Z,1510156611.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:51.427Z,1510156611.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T15:56:51.428Z,1510156611.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:51.827Z,1510156611.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T15:56:51.828Z,1510156611.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:52.223Z,1510156612.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T15:56:52.224Z,1510156612.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:52.627Z,1510156612.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T15:56:52.628Z,1510156612.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:53.023Z,1510156613.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T15:56:53.024Z,1510156613.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:53.423Z,1510156613.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T15:56:53.424Z,1510156613.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:53.825Z,1510156613.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T15:56:53.826Z,1510156613.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:54.240Z,1510156614.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-08T15:56:54.253Z,1510156614.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:54.627Z,1510156614.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T15:56:54.628Z,1510156614.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:55.058Z,1510156615.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-08T15:56:55.059Z,1510156615.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:55.426Z,1510156615.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T15:56:55.427Z,1510156615.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:55.866Z,1510156615.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-08T15:56:55.867Z,1510156615.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:56.223Z,1510156616.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T15:56:56.224Z,1510156616.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:56.631Z,1510156616.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-08T15:56:56.632Z,1510156616.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:57.028Z,1510156617.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:57.431Z,1510156617.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:57.827Z,1510156617.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:58.227Z,1510156618.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:58.624Z,1510156618.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:59.023Z,1510156619.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:59.427Z,1510156619.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:56:59.823Z,1510156619.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:00.223Z,1510156620.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:00.628Z,1510156620.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:01.023Z,1510156621.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:01.423Z,1510156621.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:01.828Z,1510156621.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:02.223Z,1510156622.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:02.631Z,1510156622.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:03.029Z,1510156623.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:03.423Z,1510156623.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:03.824Z,1510156623.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:04.263Z,1510156624.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:04.627Z,1510156624.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:05.024Z,1510156625.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:05.429Z,1510156625.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:05.826Z,1510156625.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:06.232Z,1510156626.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:06.632Z,1510156626.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:07.029Z,1510156627.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:07.424Z,1510156627.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:07.829Z,1510156627.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:08.224Z,1510156628.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:08.624Z,1510156628.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:09.029Z,1510156629.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:09.435Z,1510156629.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:09.840Z,1510156629.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:10.229Z,1510156630.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:10.627Z,1510156630.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:11.032Z,1510156631.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:11.429Z,1510156631.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:11.827Z,1510156631.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:12.291Z,1510156632.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:12.629Z,1510156632.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:13.031Z,1510156633.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:13.424Z,1510156633.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:13.829Z,1510156633.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:14.226Z,1510156634.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:14.631Z,1510156634.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:15.030Z,1510156635.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:15.445Z,1510156635.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:15.831Z,1510156635.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:16.230Z,1510156636.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:16.669Z,1510156636.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:17.031Z,1510156637.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:17.467Z,1510156637.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:17.829Z,1510156637.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:18.226Z,1510156638.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:18.628Z,1510156638.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:19.024Z,1510156639.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:19.429Z,1510156639.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:19.829Z,1510156639.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:20.229Z,1510156640.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:20.631Z,1510156640.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:21.026Z,1510156641.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:21.425Z,1510156641.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:21.827Z,1510156641.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:22.226Z,1510156642.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:22.629Z,1510156642.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:23.025Z,1510156643.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:23.427Z,1510156643.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:23.829Z,1510156643.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:24.224Z,1510156644.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:24.625Z,1510156644.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:25.039Z,1510156645.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:25.428Z,1510156645.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:25.868Z,1510156645.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:26.228Z,1510156646.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:26.631Z,1510156646.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:27.029Z,1510156647.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:27.428Z,1510156647.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:27.823Z,1510156647.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:28.224Z,1510156648.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:28.628Z,1510156648.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:29.024Z,1510156649.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:29.424Z,1510156649.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:29.831Z,1510156649.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:30.223Z,1510156650.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:30.624Z,1510156650.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:31.028Z,1510156651.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:31.428Z,1510156651.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:31.824Z,1510156651.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:32.243Z,1510156652.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:32.627Z,1510156652.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:33.024Z,1510156653.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:33.431Z,1510156653.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:33.827Z,1510156653.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:34.229Z,1510156654.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:34.637Z,1510156654.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:35.031Z,1510156655.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:35.424Z,1510156655.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:35.830Z,1510156655.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:36.227Z,1510156656.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:36.655Z,1510156656.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:37.032Z,1510156657.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:37.425Z,1510156657.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:37.830Z,1510156657.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:38.253Z,1510156658.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:38.633Z,1510156658.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:41.751Z,1510156661.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:41.907Z,1510156661.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:42.308Z,1510156662.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:42.685Z,1510156662.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:43.080Z,1510156663.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:43.480Z,1510156663.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:43.882Z,1510156663.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:44.287Z,1510156664.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:44.687Z,1510156664.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:45.078Z,1510156665.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:45.491Z,1510156665.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:45.894Z,1510156665.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:46.270Z,1510156666.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:46.689Z,1510156666.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:47.070Z,1510156667.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:47.471Z,1510156667.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:47.894Z,1510156667.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:48.294Z,1510156668.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:48.691Z,1510156668.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:49.095Z,1510156669.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:49.470Z,1510156669.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:49.874Z,1510156669.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:50.280Z,1510156670.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:50.700Z,1510156670.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:51.074Z,1510156671.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:51.479Z,1510156671.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:51.898Z,1510156671.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:52.273Z,1510156672.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:52.679Z,1510156672.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:53.078Z,1510156673.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:53.473Z,1510156673.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:53.874Z,1510156673.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:54.273Z,1510156674.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:54.673Z,1510156674.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:55.074Z,1510156675.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:55.473Z,1510156675.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:55.874Z,1510156675.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:56.274Z,1510156676.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:56.673Z,1510156676.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:57.078Z,1510156677.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:57.474Z,1510156677.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:57.873Z,1510156677.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:58.279Z,1510156678.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:58.675Z,1510156678.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:59.077Z,1510156679.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:59.479Z,1510156679.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:57:59.581Z,1510156679.581 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T15:57:59.581Z,1510156679.581 [NAL9602] No Fault, FailCount= 5
2017-11-08T15:57:59.845Z,1510156679.845 [NAL9602](INFO): Powering up NAL9602
2017-11-08T15:57:59.880Z,1510156679.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:00.283Z,1510156680.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:00.680Z,1510156680.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:01.083Z,1510156681.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:01.520Z,1510156681.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:01.880Z,1510156681.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:02.275Z,1510156682.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:02.722Z,1510156682.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:03.075Z,1510156683.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:03.479Z,1510156683.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:03.916Z,1510156683.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:04.278Z,1510156684.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:04.707Z,1510156684.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:05.078Z,1510156685.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:05.474Z,1510156685.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:05.873Z,1510156685.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:06.283Z,1510156686.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:06.678Z,1510156686.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:07.073Z,1510156687.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:07.478Z,1510156687.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:07.874Z,1510156687.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:08.277Z,1510156688.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:08.679Z,1510156688.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:09.074Z,1510156689.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:09.473Z,1510156689.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:09.878Z,1510156689.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:10.274Z,1510156690.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:10.705Z,1510156690.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:11.045Z,1510156691.045 [NAL9602](INFO): NAL9602 initialized
2017-11-08T15:58:11.078Z,1510156691.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:11.474Z,1510156691.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:11.906Z,1510156691.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:12.303Z,1510156692.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:12.703Z,1510156692.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:13.104Z,1510156693.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:13.478Z,1510156693.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:13.874Z,1510156693.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:14.273Z,1510156694.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:14.702Z,1510156694.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:15.101Z,1510156695.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:15.485Z,1510156695.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:15.878Z,1510156695.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:16.274Z,1510156696.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:16.679Z,1510156696.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:17.078Z,1510156697.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:17.482Z,1510156697.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:17.885Z,1510156697.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:18.289Z,1510156698.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:18.679Z,1510156698.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:19.076Z,1510156699.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:19.513Z,1510156699.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:19.889Z,1510156699.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:20.313Z,1510156700.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:20.683Z,1510156700.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:21.078Z,1510156701.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:21.485Z,1510156701.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:21.889Z,1510156701.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:22.290Z,1510156702.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:22.678Z,1510156702.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:23.078Z,1510156703.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:23.490Z,1510156703.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:23.935Z,1510156703.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:24.290Z,1510156704.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:24.677Z,1510156704.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:25.121Z,1510156705.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:25.490Z,1510156705.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:25.886Z,1510156705.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:26.291Z,1510156706.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:26.723Z,1510156706.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:27.081Z,1510156707.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:27.523Z,1510156707.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:27.895Z,1510156707.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:28.286Z,1510156708.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:28.683Z,1510156708.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:29.088Z,1510156709.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:29.486Z,1510156709.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:29.886Z,1510156709.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:30.290Z,1510156710.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:30.677Z,1510156710.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:31.077Z,1510156711.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:31.490Z,1510156711.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:31.886Z,1510156711.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:32.286Z,1510156712.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:32.681Z,1510156712.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:33.077Z,1510156713.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:33.486Z,1510156713.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:33.889Z,1510156713.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:34.286Z,1510156714.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:34.683Z,1510156714.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:35.081Z,1510156715.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:35.486Z,1510156715.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:35.917Z,1510156715.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:36.290Z,1510156716.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:36.680Z,1510156716.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:37.083Z,1510156717.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:37.490Z,1510156717.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:37.894Z,1510156717.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:38.295Z,1510156718.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:38.694Z,1510156718.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:41.777Z,1510156721.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:41.959Z,1510156721.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:42.336Z,1510156722.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:42.736Z,1510156722.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:43.130Z,1510156723.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:43.528Z,1510156723.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:43.933Z,1510156723.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:44.329Z,1510156724.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:44.735Z,1510156724.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:45.136Z,1510156725.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:45.544Z,1510156725.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:45.915Z,1510156725.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:46.363Z,1510156726.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:46.719Z,1510156726.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:47.119Z,1510156727.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:47.544Z,1510156727.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:47.966Z,1510156727.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:48.344Z,1510156728.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:48.719Z,1510156728.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:49.164Z,1510156729.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:49.514Z,1510156729.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:49.947Z,1510156729.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:50.318Z,1510156730.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:50.743Z,1510156730.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:51.145Z,1510156731.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:51.543Z,1510156731.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:51.917Z,1510156731.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:52.314Z,1510156732.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:52.723Z,1510156732.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:53.118Z,1510156733.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:53.538Z,1510156733.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:53.926Z,1510156733.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:54.325Z,1510156734.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:54.718Z,1510156734.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:55.114Z,1510156735.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:55.517Z,1510156735.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:55.914Z,1510156735.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:56.314Z,1510156736.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:56.749Z,1510156736.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:57.145Z,1510156737.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:57.529Z,1510156737.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:57.917Z,1510156737.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:58.359Z,1510156738.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:58.717Z,1510156738.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:59.119Z,1510156739.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:59.530Z,1510156739.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:58:59.926Z,1510156739.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:00.329Z,1510156740.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:00.717Z,1510156740.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:01.116Z,1510156741.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:01.517Z,1510156741.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:01.918Z,1510156741.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:02.322Z,1510156742.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:02.724Z,1510156742.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:03.129Z,1510156743.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:03.526Z,1510156743.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:03.923Z,1510156743.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:04.321Z,1510156744.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:04.720Z,1510156744.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:05.123Z,1510156745.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:05.545Z,1510156745.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:05.943Z,1510156745.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:06.345Z,1510156746.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:06.720Z,1510156746.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:07.116Z,1510156747.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:07.514Z,1510156747.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:07.917Z,1510156747.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:08.315Z,1510156748.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:08.744Z,1510156748.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:09.167Z,1510156749.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:09.542Z,1510156749.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:09.917Z,1510156749.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:10.319Z,1510156750.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:10.767Z,1510156750.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:11.117Z,1510156751.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:11.568Z,1510156751.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:11.925Z,1510156751.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:12.356Z,1510156752.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:12.718Z,1510156752.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:13.117Z,1510156753.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:13.517Z,1510156753.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:13.923Z,1510156753.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:14.316Z,1510156754.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:14.749Z,1510156754.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:15.150Z,1510156755.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:15.529Z,1510156755.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:15.917Z,1510156755.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:16.318Z,1510156756.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:16.718Z,1510156756.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:17.117Z,1510156757.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:17.530Z,1510156757.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:17.931Z,1510156757.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:18.327Z,1510156758.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:18.723Z,1510156758.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:19.117Z,1510156759.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:19.518Z,1510156759.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:19.920Z,1510156759.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:20.324Z,1510156760.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:20.755Z,1510156760.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:21.151Z,1510156761.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:21.530Z,1510156761.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:21.919Z,1510156761.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:22.320Z,1510156762.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:22.720Z,1510156762.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:23.123Z,1510156763.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:23.527Z,1510156763.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:23.930Z,1510156763.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:24.354Z,1510156764.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:24.719Z,1510156764.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:25.119Z,1510156765.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:25.518Z,1510156765.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:25.920Z,1510156765.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:26.320Z,1510156766.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:26.755Z,1510156766.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:27.126Z,1510156767.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:27.530Z,1510156767.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:27.916Z,1510156767.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:28.317Z,1510156768.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:28.728Z,1510156768.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:29.122Z,1510156769.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:29.530Z,1510156769.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:29.930Z,1510156769.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:30.327Z,1510156770.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:30.722Z,1510156770.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:31.122Z,1510156771.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:31.520Z,1510156771.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:31.919Z,1510156771.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:32.321Z,1510156772.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:32.798Z,1510156772.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:33.128Z,1510156773.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:33.564Z,1510156773.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:33.921Z,1510156773.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:34.356Z,1510156774.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:34.721Z,1510156774.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:35.120Z,1510156775.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:35.527Z,1510156775.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:35.929Z,1510156775.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:36.331Z,1510156776.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:36.722Z,1510156776.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:37.121Z,1510156777.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:37.520Z,1510156777.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:37.918Z,1510156777.918 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:37.918Z,1510156777.918 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52
2017-11-08T15:59:37.918Z,1510156777.918 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T15:59:37.920Z,1510156777.920 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:37.920Z,1510156777.920 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52
2017-11-08T15:59:37.920Z,1510156777.920 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T15:59:37.922Z,1510156777.922 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:37.922Z,1510156777.922 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 52
2017-11-08T15:59:37.922Z,1510156777.922 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T15:59:38.001Z,1510156778.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T15:59:38.001Z,1510156778.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T15:59:38.002Z,1510156778.002 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T15:59:38.413Z,1510156778.413 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T15:59:38.413Z,1510156778.413 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52
2017-11-08T15:59:38.413Z,1510156778.413 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T15:59:38.413Z,1510156778.413 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52
2017-11-08T15:59:38.414Z,1510156778.414 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T15:59:38.414Z,1510156778.414 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 52
2017-11-08T15:59:38.734Z,1510156778.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T15:59:38.735Z,1510156778.735 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:59:38.735Z,1510156778.735 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:59:38.736Z,1510156778.736 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T15:59:38.736Z,1510156778.736 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:59:38.736Z,1510156778.736 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:59:38.737Z,1510156778.737 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T15:59:38.737Z,1510156778.737 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T15:59:38.737Z,1510156778.737 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T15:59:41.827Z,1510156781.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-11-08T15:59:41.829Z,1510156781.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:41.995Z,1510156781.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-08T15:59:41.996Z,1510156781.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:42.391Z,1510156782.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-08T15:59:42.392Z,1510156782.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:42.773Z,1510156782.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-08T15:59:42.774Z,1510156782.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:43.172Z,1510156783.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-08T15:59:43.173Z,1510156783.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:43.579Z,1510156783.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-08T15:59:43.580Z,1510156783.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:43.977Z,1510156783.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-08T15:59:43.978Z,1510156783.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:44.376Z,1510156784.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-08T15:59:44.377Z,1510156784.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:44.766Z,1510156784.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T15:59:44.767Z,1510156784.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:45.151Z,1510156785.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T15:59:45.152Z,1510156785.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:45.555Z,1510156785.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T15:59:45.556Z,1510156785.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:45.959Z,1510156785.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T15:59:45.960Z,1510156785.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:46.351Z,1510156786.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T15:59:46.352Z,1510156786.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:46.782Z,1510156786.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T15:59:46.783Z,1510156786.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:47.178Z,1510156787.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T15:59:47.179Z,1510156787.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:47.573Z,1510156787.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T15:59:47.574Z,1510156787.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:47.959Z,1510156787.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T15:59:47.960Z,1510156787.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:48.359Z,1510156788.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T15:59:48.360Z,1510156788.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:48.760Z,1510156788.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T15:59:48.761Z,1510156788.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:49.158Z,1510156789.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T15:59:49.159Z,1510156789.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:49.589Z,1510156789.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T15:59:49.590Z,1510156789.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:49.985Z,1510156789.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T15:59:49.986Z,1510156789.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:50.390Z,1510156790.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T15:59:50.390Z,1510156790.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:50.760Z,1510156790.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T15:59:50.761Z,1510156790.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:51.158Z,1510156791.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T15:59:51.159Z,1510156791.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:51.567Z,1510156791.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T15:59:51.568Z,1510156791.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:51.960Z,1510156791.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T15:59:51.961Z,1510156791.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:52.361Z,1510156792.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T15:59:52.362Z,1510156792.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:52.770Z,1510156792.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T15:59:52.771Z,1510156792.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:53.170Z,1510156793.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T15:59:53.171Z,1510156793.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:53.570Z,1510156793.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T15:59:53.571Z,1510156793.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:54.018Z,1510156794.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T15:59:54.019Z,1510156794.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:54.380Z,1510156794.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T15:59:54.381Z,1510156794.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:54.762Z,1510156794.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T15:59:54.763Z,1510156794.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:55.206Z,1510156795.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T15:59:55.206Z,1510156795.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:55.575Z,1510156795.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T15:59:55.576Z,1510156795.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:56.007Z,1510156796.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T15:59:56.008Z,1510156796.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:56.379Z,1510156796.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T15:59:56.380Z,1510156796.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:56.762Z,1510156796.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T15:59:56.763Z,1510156796.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:57.159Z,1510156797.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T15:59:57.160Z,1510156797.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:57.567Z,1510156797.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T15:59:57.568Z,1510156797.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:57.963Z,1510156797.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:58.362Z,1510156798.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:58.774Z,1510156798.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:59.174Z,1510156799.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:59.572Z,1510156799.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T15:59:59.962Z,1510156799.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:00.361Z,1510156800.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:00.763Z,1510156800.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:01.159Z,1510156801.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:01.572Z,1510156801.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:01.972Z,1510156801.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:02.379Z,1510156802.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:02.771Z,1510156802.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:03.164Z,1510156803.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:03.564Z,1510156803.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:03.964Z,1510156803.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:04.409Z,1510156804.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:04.778Z,1510156804.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:05.177Z,1510156805.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:05.576Z,1510156805.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:05.964Z,1510156805.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:06.371Z,1510156806.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:06.771Z,1510156806.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:07.169Z,1510156807.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:07.577Z,1510156807.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:07.975Z,1510156807.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:08.375Z,1510156808.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:08.771Z,1510156808.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:09.167Z,1510156809.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:09.568Z,1510156809.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:09.968Z,1510156809.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:10.365Z,1510156810.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:10.773Z,1510156810.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:11.171Z,1510156811.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:11.576Z,1510156811.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:11.965Z,1510156811.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:12.373Z,1510156812.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:12.769Z,1510156812.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:13.172Z,1510156813.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:13.580Z,1510156813.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:13.980Z,1510156813.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:14.380Z,1510156814.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:14.776Z,1510156814.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:15.152Z,1510156815.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:15.551Z,1510156815.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:15.960Z,1510156815.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:16.403Z,1510156816.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:16.804Z,1510156816.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:17.182Z,1510156817.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:17.583Z,1510156817.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:17.991Z,1510156817.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:18.358Z,1510156818.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:18.787Z,1510156818.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:19.154Z,1510156819.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:19.583Z,1510156819.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:19.984Z,1510156819.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:20.382Z,1510156820.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:20.758Z,1510156820.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:21.158Z,1510156821.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:21.554Z,1510156821.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:21.960Z,1510156821.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:22.354Z,1510156822.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:22.782Z,1510156822.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:23.183Z,1510156823.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:23.577Z,1510156823.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:23.958Z,1510156823.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:24.358Z,1510156824.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:24.754Z,1510156824.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:25.154Z,1510156825.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:25.586Z,1510156825.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:25.985Z,1510156825.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:26.365Z,1510156826.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:26.758Z,1510156826.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:27.191Z,1510156827.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:27.564Z,1510156827.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:27.964Z,1510156827.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:28.357Z,1510156828.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:28.766Z,1510156828.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:29.186Z,1510156829.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:29.590Z,1510156829.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:29.958Z,1510156829.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:30.359Z,1510156830.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:30.758Z,1510156830.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:31.160Z,1510156831.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:31.592Z,1510156831.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:31.966Z,1510156831.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:32.371Z,1510156832.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:32.764Z,1510156832.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:33.158Z,1510156833.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:33.557Z,1510156833.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:33.960Z,1510156833.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:34.359Z,1510156834.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:34.766Z,1510156834.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:35.176Z,1510156835.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:35.576Z,1510156835.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:35.958Z,1510156835.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:36.361Z,1510156836.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:36.759Z,1510156836.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:37.158Z,1510156837.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:37.571Z,1510156837.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:37.967Z,1510156837.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:38.375Z,1510156838.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:38.765Z,1510156838.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:41.912Z,1510156841.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:42.099Z,1510156842.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:42.464Z,1510156842.464 [PNI_TCM](ERROR): CRC does not match. Expected:0x42172 got:0x14621
2017-11-08T16:00:42.500Z,1510156842.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:42.907Z,1510156842.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:43.299Z,1510156843.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:43.699Z,1510156843.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:44.063Z,1510156844.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:44.479Z,1510156844.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:44.898Z,1510156844.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:45.275Z,1510156845.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:45.675Z,1510156845.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:46.051Z,1510156846.051 [PNI_TCM](ERROR): CRC does not match. Expected:0x3260 got:0x16644
2017-11-08T16:00:46.079Z,1510156846.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:46.483Z,1510156846.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:46.871Z,1510156846.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:47.270Z,1510156847.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:47.663Z,1510156847.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:48.075Z,1510156848.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:48.468Z,1510156848.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:48.881Z,1510156848.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:49.279Z,1510156849.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:49.677Z,1510156849.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:50.064Z,1510156850.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:50.472Z,1510156850.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:50.884Z,1510156850.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:51.287Z,1510156851.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:51.664Z,1510156851.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:52.102Z,1510156852.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:52.479Z,1510156852.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:52.887Z,1510156852.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:53.273Z,1510156853.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:53.668Z,1510156853.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:54.061Z,1510156854.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:54.477Z,1510156854.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:54.873Z,1510156854.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:55.277Z,1510156855.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:55.666Z,1510156855.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:56.062Z,1510156856.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:56.477Z,1510156856.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:56.874Z,1510156856.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:57.271Z,1510156857.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:57.669Z,1510156857.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:58.067Z,1510156858.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:58.477Z,1510156858.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:58.873Z,1510156858.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:59.283Z,1510156859.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:00:59.669Z,1510156859.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:00.073Z,1510156860.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:00.480Z,1510156860.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:00.876Z,1510156860.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:01.274Z,1510156861.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:01.669Z,1510156861.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:02.041Z,1510156862.041 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-08T16:01:02.079Z,1510156862.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:02.479Z,1510156862.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:02.883Z,1510156862.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:03.277Z,1510156863.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:03.675Z,1510156863.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:04.141Z,1510156864.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:04.477Z,1510156864.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:04.907Z,1510156864.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:05.285Z,1510156865.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:05.699Z,1510156865.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:06.050Z,1510156866.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:06.485Z,1510156866.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:06.862Z,1510156866.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:07.287Z,1510156867.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:07.663Z,1510156867.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:08.058Z,1510156868.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:08.484Z,1510156868.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:08.883Z,1510156868.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:09.266Z,1510156869.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:09.656Z,1510156869.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:10.059Z,1510156870.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:10.491Z,1510156870.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:10.866Z,1510156870.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:11.267Z,1510156871.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:11.657Z,1510156871.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:12.084Z,1510156872.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:12.488Z,1510156872.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:12.865Z,1510156872.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:13.268Z,1510156873.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:13.667Z,1510156873.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:14.096Z,1510156874.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:14.465Z,1510156874.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:14.867Z,1510156874.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:15.291Z,1510156875.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:15.653Z,1510156875.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:16.057Z,1510156876.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:16.468Z,1510156876.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:16.887Z,1510156876.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:17.268Z,1510156877.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:17.663Z,1510156877.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:18.057Z,1510156878.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:18.486Z,1510156878.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:18.886Z,1510156878.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:19.265Z,1510156879.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:19.658Z,1510156879.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:20.081Z,1510156880.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:20.468Z,1510156880.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:20.868Z,1510156880.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:21.287Z,1510156881.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:21.680Z,1510156881.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:22.059Z,1510156882.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:22.488Z,1510156882.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:22.864Z,1510156882.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:23.282Z,1510156883.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:23.664Z,1510156883.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:24.057Z,1510156884.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:24.463Z,1510156884.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:24.888Z,1510156884.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:25.266Z,1510156885.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:25.661Z,1510156885.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:26.111Z,1510156886.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:26.516Z,1510156886.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:26.897Z,1510156886.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:27.269Z,1510156887.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:27.691Z,1510156887.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:28.086Z,1510156888.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:28.499Z,1510156888.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:28.865Z,1510156888.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:29.267Z,1510156889.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:29.683Z,1510156889.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:30.066Z,1510156890.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:30.467Z,1510156890.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:30.891Z,1510156890.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:31.285Z,1510156891.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:31.663Z,1510156891.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:32.063Z,1510156892.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:32.466Z,1510156892.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:32.885Z,1510156892.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:33.289Z,1510156893.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:33.664Z,1510156893.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:34.060Z,1510156894.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:34.491Z,1510156894.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:34.869Z,1510156894.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:35.266Z,1510156895.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:35.662Z,1510156895.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:36.084Z,1510156896.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:36.493Z,1510156896.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:36.908Z,1510156896.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:37.268Z,1510156897.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:37.669Z,1510156897.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:38.062Z,1510156898.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:38.470Z,1510156898.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:38.870Z,1510156898.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:41.959Z,1510156901.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:41.963Z,1510156901.963 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T15:56:41.7Z
2017-11-08T16:01:41.963Z,1510156901.963 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T16:01:41.963Z,1510156901.963 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T16:01:42.103Z,1510156902.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:42.761Z,1510156902.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:42.915Z,1510156902.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:43.346Z,1510156903.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:43.746Z,1510156903.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:46.845Z,1510156906.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:46.938Z,1510156906.938 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171108T132236/Courier0012.lzma
2017-11-08T16:01:47.004Z,1510156907.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:47.393Z,1510156907.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:47.737Z,1510156907.737 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0012.lzma.bak
2017-11-08T16:01:47.737Z,1510156907.737 [DataOverHttps](INFO): SBD MOMSN=5222917
2017-11-08T16:01:47.794Z,1510156907.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:48.753Z,1510156908.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:48.936Z,1510156908.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:51.997Z,1510156911.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:52.160Z,1510156912.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:52.577Z,1510156912.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:52.931Z,1510156912.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:53.376Z,1510156913.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:53.754Z,1510156913.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:56.825Z,1510156916.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:56.974Z,1510156916.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:57.308Z,1510156917.308 [DataOverHttps](INFO): Sending 256 bytes from file Logs/20171108T132236/Express0013.lzma
2017-11-08T16:01:57.362Z,1510156917.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:57.756Z,1510156917.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:58.106Z,1510156918.106 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0013.lzma.bak
2017-11-08T16:01:58.107Z,1510156918.107 [DataOverHttps](INFO): SBD MOMSN=5222920
2017-11-08T16:01:58.165Z,1510156918.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:59.112Z,1510156919.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:01:59.115Z,1510156919.115 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T16:01:59.115Z,1510156919.115 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T16:01:59.115Z,1510156919.115 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T16:01:59.269Z,1510156919.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:02.371Z,1510156922.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:02.520Z,1510156922.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:02.909Z,1510156922.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:03.312Z,1510156923.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:03.714Z,1510156923.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:04.107Z,1510156924.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:04.520Z,1510156924.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:04.919Z,1510156924.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:05.324Z,1510156925.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:05.707Z,1510156925.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:06.107Z,1510156926.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:06.508Z,1510156926.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:06.908Z,1510156926.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:07.307Z,1510156927.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:07.716Z,1510156927.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:08.115Z,1510156928.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:08.527Z,1510156928.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:08.906Z,1510156928.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:09.311Z,1510156929.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:09.710Z,1510156929.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:10.110Z,1510156930.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:10.516Z,1510156930.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:10.920Z,1510156930.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:11.320Z,1510156931.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:11.711Z,1510156931.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:12.108Z,1510156932.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:12.508Z,1510156932.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:12.912Z,1510156932.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:13.309Z,1510156933.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:13.717Z,1510156933.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:14.187Z,1510156934.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:14.531Z,1510156934.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:14.921Z,1510156934.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:15.336Z,1510156935.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:15.702Z,1510156935.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:16.135Z,1510156936.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:16.531Z,1510156936.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:16.922Z,1510156936.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:17.322Z,1510156937.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:17.727Z,1510156937.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:18.101Z,1510156938.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:18.498Z,1510156938.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:18.904Z,1510156938.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:19.321Z,1510156939.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:19.721Z,1510156939.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:20.126Z,1510156940.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:20.526Z,1510156940.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:20.905Z,1510156940.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:21.307Z,1510156941.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:21.704Z,1510156941.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:22.107Z,1510156942.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:22.534Z,1510156942.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:22.932Z,1510156942.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:23.330Z,1510156943.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:23.698Z,1510156943.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:24.101Z,1510156944.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:24.543Z,1510156944.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:24.905Z,1510156944.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:25.303Z,1510156945.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:25.730Z,1510156945.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:26.135Z,1510156946.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:26.514Z,1510156946.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:26.902Z,1510156946.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:27.303Z,1510156947.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:27.711Z,1510156947.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:28.102Z,1510156948.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:28.513Z,1510156948.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:28.910Z,1510156948.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:29.333Z,1510156949.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:29.701Z,1510156949.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:30.104Z,1510156950.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:30.506Z,1510156950.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:30.906Z,1510156950.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:31.305Z,1510156951.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:31.710Z,1510156951.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:32.109Z,1510156952.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:32.535Z,1510156952.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:32.905Z,1510156952.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:33.305Z,1510156953.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:33.708Z,1510156953.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:34.106Z,1510156954.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:34.513Z,1510156954.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:34.910Z,1510156954.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:35.314Z,1510156955.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:35.711Z,1510156955.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:36.102Z,1510156956.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:36.575Z,1510156956.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:36.905Z,1510156956.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:37.339Z,1510156957.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:37.715Z,1510156957.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:38.143Z,1510156958.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:38.514Z,1510156958.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:38.948Z,1510156958.948 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:38.948Z,1510156958.948 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53
2017-11-08T16:02:38.948Z,1510156958.948 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T16:02:38.987Z,1510156958.987 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:38.988Z,1510156958.988 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53
2017-11-08T16:02:38.988Z,1510156958.988 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T16:02:38.989Z,1510156958.989 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:38.990Z,1510156958.990 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 53
2017-11-08T16:02:38.990Z,1510156958.990 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T16:02:39.065Z,1510156959.065 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T16:02:39.065Z,1510156959.065 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T16:02:39.065Z,1510156959.065 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T16:02:39.441Z,1510156959.441 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T16:02:39.441Z,1510156959.441 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53
2017-11-08T16:02:39.441Z,1510156959.441 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T16:02:39.441Z,1510156959.441 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53
2017-11-08T16:02:39.442Z,1510156959.442 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T16:02:39.442Z,1510156959.442 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 53
2017-11-08T16:02:39.738Z,1510156959.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T16:02:39.739Z,1510156959.739 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:02:39.739Z,1510156959.739 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:02:39.740Z,1510156959.740 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T16:02:39.740Z,1510156959.740 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:02:39.751Z,1510156959.751 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:02:39.752Z,1510156959.752 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T16:02:39.754Z,1510156959.754 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:02:39.755Z,1510156959.755 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:02:40.227Z,1510156960.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2017-11-08T16:02:40.228Z,1510156960.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:40.525Z,1510156960.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T16:02:40.526Z,1510156960.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:40.929Z,1510156960.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T16:02:40.930Z,1510156960.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:41.330Z,1510156961.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T16:02:41.331Z,1510156961.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:41.704Z,1510156961.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T16:02:41.705Z,1510156961.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:42.103Z,1510156962.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T16:02:42.104Z,1510156962.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:42.502Z,1510156962.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T16:02:42.503Z,1510156962.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:42.901Z,1510156962.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T16:02:42.902Z,1510156962.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:43.304Z,1510156963.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T16:02:43.305Z,1510156963.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:43.729Z,1510156963.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T16:02:43.730Z,1510156963.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:44.112Z,1510156964.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T16:02:44.135Z,1510156964.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:44.509Z,1510156964.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T16:02:44.510Z,1510156964.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:44.904Z,1510156964.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T16:02:44.905Z,1510156964.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:45.298Z,1510156965.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T16:02:45.299Z,1510156965.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:45.707Z,1510156965.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T16:02:45.708Z,1510156965.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:46.102Z,1510156966.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T16:02:46.103Z,1510156966.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:46.547Z,1510156966.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T16:02:46.548Z,1510156966.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:46.929Z,1510156966.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T16:02:46.930Z,1510156966.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:47.313Z,1510156967.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T16:02:47.314Z,1510156967.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:47.701Z,1510156967.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T16:02:47.702Z,1510156967.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:48.105Z,1510156968.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T16:02:48.106Z,1510156968.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:48.505Z,1510156968.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T16:02:48.506Z,1510156968.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:48.901Z,1510156968.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T16:02:48.902Z,1510156968.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:48.981Z,1510156968.981 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T16:02:49.302Z,1510156969.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T16:02:49.303Z,1510156969.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:49.709Z,1510156969.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T16:02:49.710Z,1510156969.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:50.135Z,1510156970.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T16:02:50.136Z,1510156970.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:50.510Z,1510156970.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T16:02:50.510Z,1510156970.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:50.907Z,1510156970.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T16:02:50.908Z,1510156970.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:51.306Z,1510156971.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T16:02:51.307Z,1510156971.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:51.711Z,1510156971.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T16:02:51.712Z,1510156971.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:52.107Z,1510156972.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T16:02:52.108Z,1510156972.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:52.520Z,1510156972.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T16:02:52.521Z,1510156972.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:52.917Z,1510156972.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T16:02:52.918Z,1510156972.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:53.320Z,1510156973.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T16:02:53.321Z,1510156973.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:53.703Z,1510156973.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T16:02:53.704Z,1510156973.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:54.115Z,1510156974.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T16:02:54.116Z,1510156974.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:54.509Z,1510156974.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T16:02:54.510Z,1510156974.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:54.912Z,1510156974.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T16:02:54.913Z,1510156974.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:55.316Z,1510156975.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T16:02:55.317Z,1510156975.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:55.720Z,1510156975.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T16:02:55.721Z,1510156975.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:56.116Z,1510156976.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T16:02:56.118Z,1510156976.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:56.524Z,1510156976.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T16:02:56.525Z,1510156976.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:56.907Z,1510156976.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T16:02:56.908Z,1510156976.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:57.308Z,1510156977.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T16:02:57.309Z,1510156977.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:57.715Z,1510156977.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T16:02:57.716Z,1510156977.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:58.135Z,1510156978.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T16:02:58.136Z,1510156978.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:58.520Z,1510156978.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T16:02:58.521Z,1510156978.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:58.982Z,1510156978.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:59.325Z,1510156979.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:02:59.714Z,1510156979.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:02.820Z,1510156982.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:02.965Z,1510156982.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:03.408Z,1510156983.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:03.765Z,1510156983.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:04.162Z,1510156984.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:04.565Z,1510156984.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:04.940Z,1510156984.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:05.364Z,1510156985.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:05.770Z,1510156985.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:06.169Z,1510156986.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:06.569Z,1510156986.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:06.938Z,1510156986.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:07.348Z,1510156987.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:07.746Z,1510156987.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:08.145Z,1510156988.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:08.566Z,1510156988.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:08.976Z,1510156988.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:09.380Z,1510156989.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:09.746Z,1510156989.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:10.151Z,1510156990.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:10.550Z,1510156990.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:10.956Z,1510156990.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:11.352Z,1510156991.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:11.802Z,1510156991.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:12.163Z,1510156992.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:12.559Z,1510156992.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:12.955Z,1510156992.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:13.350Z,1510156993.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:13.751Z,1510156993.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:14.153Z,1510156994.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:14.559Z,1510156994.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:14.963Z,1510156994.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:15.359Z,1510156995.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:15.750Z,1510156995.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:16.150Z,1510156996.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:16.551Z,1510156996.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:16.956Z,1510156996.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:17.350Z,1510156997.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:17.763Z,1510156997.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:18.159Z,1510156998.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:18.563Z,1510156998.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:18.951Z,1510156998.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:19.355Z,1510156999.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:19.751Z,1510156999.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:20.151Z,1510157000.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:20.564Z,1510157000.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:20.964Z,1510157000.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:21.364Z,1510157001.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:21.751Z,1510157001.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:22.151Z,1510157002.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:22.556Z,1510157002.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:22.956Z,1510157002.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:23.360Z,1510157003.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:23.851Z,1510157003.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:24.163Z,1510157004.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:24.563Z,1510157004.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:24.986Z,1510157004.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:25.367Z,1510157005.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:25.787Z,1510157005.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:26.143Z,1510157006.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:26.562Z,1510157006.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:26.971Z,1510157006.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:27.374Z,1510157007.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:27.746Z,1510157007.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:28.146Z,1510157008.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:28.551Z,1510157008.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:28.951Z,1510157008.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:29.346Z,1510157009.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:29.778Z,1510157009.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:30.154Z,1510157010.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:30.557Z,1510157010.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:30.951Z,1510157010.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:31.346Z,1510157011.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:31.751Z,1510157011.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:32.147Z,1510157012.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:32.558Z,1510157012.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:32.981Z,1510157012.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:33.357Z,1510157013.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:33.749Z,1510157013.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:34.191Z,1510157014.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:34.550Z,1510157014.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:34.951Z,1510157014.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:35.350Z,1510157015.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:35.764Z,1510157015.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:36.158Z,1510157016.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:36.554Z,1510157016.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:36.949Z,1510157016.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:37.345Z,1510157017.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:37.751Z,1510157017.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:38.148Z,1510157018.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:38.554Z,1510157018.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:38.957Z,1510157018.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:39.354Z,1510157019.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:39.746Z,1510157019.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:40.150Z,1510157020.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:40.547Z,1510157020.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:40.948Z,1510157020.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:41.364Z,1510157021.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:41.764Z,1510157021.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:42.156Z,1510157022.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:42.561Z,1510157022.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:42.950Z,1510157022.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:43.347Z,1510157023.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:43.750Z,1510157023.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:44.146Z,1510157024.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:44.554Z,1510157024.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:44.960Z,1510157024.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:45.364Z,1510157025.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:45.746Z,1510157025.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:46.199Z,1510157026.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:46.593Z,1510157026.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:46.947Z,1510157026.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:47.349Z,1510157027.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:47.798Z,1510157027.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:48.158Z,1510157028.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:48.596Z,1510157028.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:48.951Z,1510157028.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:49.346Z,1510157029.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:49.749Z,1510157029.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:50.146Z,1510157030.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:50.558Z,1510157030.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:50.963Z,1510157030.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:51.363Z,1510157031.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:51.749Z,1510157031.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:52.149Z,1510157032.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:52.554Z,1510157032.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:52.947Z,1510157032.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:53.350Z,1510157033.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:53.759Z,1510157033.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:54.159Z,1510157034.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:54.559Z,1510157034.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:54.946Z,1510157034.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:55.349Z,1510157035.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:55.751Z,1510157035.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:56.146Z,1510157036.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:56.563Z,1510157036.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:56.000Z,1510157037.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:57.363Z,1510157037.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:57.749Z,1510157037.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:58.150Z,1510157038.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:58.559Z,1510157038.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:58.950Z,1510157038.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:59.353Z,1510157039.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:03:59.763Z,1510157039.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:02.849Z,1510157042.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:03.007Z,1510157043.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:03.398Z,1510157043.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:03.801Z,1510157043.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:04.176Z,1510157044.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:04.603Z,1510157044.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:05.003Z,1510157045.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:05.407Z,1510157045.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:05.776Z,1510157045.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:06.179Z,1510157046.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:06.580Z,1510157046.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:06.976Z,1510157046.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:07.379Z,1510157047.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:07.807Z,1510157047.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:08.210Z,1510157048.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:08.607Z,1510157048.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:09.062Z,1510157049.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:09.382Z,1510157049.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:09.823Z,1510157049.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:10.191Z,1510157050.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:10.619Z,1510157050.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:10.990Z,1510157050.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:11.390Z,1510157051.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:11.778Z,1510157051.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:12.187Z,1510157052.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:12.582Z,1510157052.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:12.979Z,1510157052.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:13.388Z,1510157053.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:13.792Z,1510157053.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:14.187Z,1510157054.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:14.591Z,1510157054.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:14.983Z,1510157054.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:15.379Z,1510157055.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:15.784Z,1510157055.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:16.184Z,1510157056.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:16.595Z,1510157056.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:16.991Z,1510157056.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:17.395Z,1510157057.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:17.784Z,1510157057.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:18.187Z,1510157058.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:18.583Z,1510157058.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:19.017Z,1510157059.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:19.392Z,1510157059.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:19.796Z,1510157059.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:20.200Z,1510157060.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:20.593Z,1510157060.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:20.983Z,1510157060.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:21.385Z,1510157061.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:21.791Z,1510157061.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:22.183Z,1510157062.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:22.594Z,1510157062.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:22.999Z,1510157062.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:23.393Z,1510157063.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:23.800Z,1510157063.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:24.180Z,1510157064.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:24.584Z,1510157064.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:24.983Z,1510157064.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:25.387Z,1510157065.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:25.791Z,1510157065.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:26.199Z,1510157066.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:26.593Z,1510157066.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:26.987Z,1510157066.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:27.380Z,1510157067.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:27.788Z,1510157067.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:28.187Z,1510157068.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:28.596Z,1510157068.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:28.996Z,1510157068.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:29.392Z,1510157069.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:29.784Z,1510157069.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:30.187Z,1510157070.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:30.588Z,1510157070.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:31.005Z,1510157071.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:31.385Z,1510157071.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:31.831Z,1510157071.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:32.196Z,1510157072.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:32.634Z,1510157072.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:32.984Z,1510157072.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:33.385Z,1510157073.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:33.784Z,1510157073.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:34.184Z,1510157074.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:34.593Z,1510157074.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:34.995Z,1510157074.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:35.393Z,1510157075.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:35.792Z,1510157075.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:36.190Z,1510157076.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:36.584Z,1510157076.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:36.991Z,1510157076.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:37.385Z,1510157077.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:37.799Z,1510157077.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:38.196Z,1510157078.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:38.589Z,1510157078.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:38.984Z,1510157078.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:39.390Z,1510157079.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:39.785Z,1510157079.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:40.183Z,1510157080.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:40.597Z,1510157080.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:41.031Z,1510157081.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:41.394Z,1510157081.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:41.785Z,1510157081.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:42.188Z,1510157082.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:42.584Z,1510157082.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:42.984Z,1510157082.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:43.388Z,1510157083.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:43.793Z,1510157083.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:44.197Z,1510157084.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:44.596Z,1510157084.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:44.992Z,1510157084.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:45.395Z,1510157085.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:45.792Z,1510157085.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:46.176Z,1510157086.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:46.601Z,1510157086.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:46.994Z,1510157086.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:47.394Z,1510157087.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:47.775Z,1510157087.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:48.176Z,1510157088.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:48.576Z,1510157088.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:48.976Z,1510157088.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:49.376Z,1510157089.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:49.805Z,1510157089.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:50.203Z,1510157090.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:50.601Z,1510157090.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:50.976Z,1510157090.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:51.423Z,1510157091.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:51.777Z,1510157091.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:52.167Z,1510157092.167 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-08T16:04:52.167Z,1510157092.167 [BPC1] Data Fault, FailCount= 1
2017-11-08T16:04:52.167Z,1510157092.167 [BPC1](ERROR): Data Fault
2017-11-08T16:04:52.177Z,1510157092.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:52.281Z,1510157092.281 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T16:04:52.601Z,1510157092.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:53.005Z,1510157093.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:53.406Z,1510157093.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:53.493Z,1510157093.493 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T16:04:53.493Z,1510157093.493 [BPC1] No Fault, FailCount= 1
2017-11-08T16:04:53.832Z,1510157093.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:54.180Z,1510157094.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:54.587Z,1510157094.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:54.983Z,1510157094.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:55.380Z,1510157095.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:55.806Z,1510157095.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:56.211Z,1510157096.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:56.587Z,1510157096.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:56.980Z,1510157096.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:57.383Z,1510157097.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:57.782Z,1510157097.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:58.180Z,1510157098.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:58.611Z,1510157098.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:58.988Z,1510157098.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:59.411Z,1510157099.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:04:59.783Z,1510157099.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:02.912Z,1510157102.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:03.067Z,1510157103.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:03.466Z,1510157103.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:03.867Z,1510157103.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:04.265Z,1510157104.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:04.662Z,1510157104.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:05.040Z,1510157105.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:05.462Z,1510157105.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:05.863Z,1510157105.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:06.266Z,1510157106.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:06.661Z,1510157106.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:07.043Z,1510157107.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:07.468Z,1510157107.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:07.866Z,1510157107.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:08.271Z,1510157108.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:08.643Z,1510157108.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:09.055Z,1510157109.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:09.473Z,1510157109.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:09.866Z,1510157109.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:10.267Z,1510157110.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:10.639Z,1510157110.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:11.039Z,1510157111.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:11.467Z,1510157111.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:11.867Z,1510157111.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:12.269Z,1510157112.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:12.648Z,1510157112.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:12.753Z,1510157112.753 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:05:12.753Z,1510157112.753 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T16:05:12.877Z,1510157112.877 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:05:12.877Z,1510157112.877 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:05:12.877Z,1510157112.877 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:05:12.877Z,1510157112.877 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T16:05:12.877Z,1510157112.877 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:05:13.043Z,1510157113.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:13.153Z,1510157113.153 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:05:13.281Z,1510157113.281 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:05:13.363Z,1510157113.363 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:05:13.497Z,1510157113.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:13.871Z,1510157113.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:14.250Z,1510157114.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:14.691Z,1510157114.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:14.769Z,1510157114.769 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:05:14.769Z,1510157114.769 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T16:05:14.977Z,1510157114.977 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:05:14.977Z,1510157114.977 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:05:14.977Z,1510157114.977 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:05:14.978Z,1510157114.978 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T16:05:14.978Z,1510157114.978 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:05:15.069Z,1510157115.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:15.157Z,1510157115.157 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:05:15.381Z,1510157115.381 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:05:15.494Z,1510157115.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:15.572Z,1510157115.572 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:05:15.884Z,1510157115.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:16.254Z,1510157116.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:16.675Z,1510157116.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:17.047Z,1510157117.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:17.121Z,1510157117.121 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:05:17.121Z,1510157117.121 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T16:05:17.189Z,1510157117.189 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:05:17.189Z,1510157117.189 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:05:17.189Z,1510157117.189 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:05:17.189Z,1510157117.189 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T16:05:17.189Z,1510157117.189 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:05:17.454Z,1510157117.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:17.541Z,1510157117.541 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:05:17.593Z,1510157117.593 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:05:17.682Z,1510157117.682 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:05:17.859Z,1510157117.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:18.260Z,1510157118.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:18.648Z,1510157118.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:19.046Z,1510157119.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:19.122Z,1510157119.122 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:05:19.122Z,1510157119.122 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T16:05:19.297Z,1510157119.297 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:05:19.297Z,1510157119.297 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:05:19.297Z,1510157119.297 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:05:19.297Z,1510157119.297 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T16:05:19.298Z,1510157119.298 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:05:19.454Z,1510157119.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:19.537Z,1510157119.537 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:05:19.701Z,1510157119.701 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:05:19.786Z,1510157119.786 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:05:19.883Z,1510157119.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:20.256Z,1510157120.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:20.647Z,1510157120.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:21.050Z,1510157121.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:21.125Z,1510157121.125 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:05:21.125Z,1510157121.125 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T16:05:21.405Z,1510157121.405 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:05:21.405Z,1510157121.405 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:05:21.405Z,1510157121.405 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:05:21.405Z,1510157121.405 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T16:05:21.406Z,1510157121.406 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:05:21.480Z,1510157121.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:21.561Z,1510157121.561 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:05:21.561Z,1510157121.561 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:05:21.809Z,1510157121.809 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:05:21.899Z,1510157121.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:22.013Z,1510157122.013 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:05:22.262Z,1510157122.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:22.648Z,1510157122.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:23.052Z,1510157123.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:23.456Z,1510157123.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:23.860Z,1510157123.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:24.255Z,1510157124.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:24.655Z,1510157124.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:25.077Z,1510157125.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:25.456Z,1510157125.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:25.859Z,1510157125.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:26.260Z,1510157126.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:26.648Z,1510157126.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:27.047Z,1510157127.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:27.468Z,1510157127.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:27.867Z,1510157127.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:28.258Z,1510157128.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:28.649Z,1510157128.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:29.048Z,1510157129.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:29.460Z,1510157129.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:29.861Z,1510157129.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:30.252Z,1510157130.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:30.648Z,1510157130.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:31.048Z,1510157131.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:31.460Z,1510157131.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:31.860Z,1510157131.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:32.268Z,1510157132.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:32.647Z,1510157132.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:33.048Z,1510157133.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:33.468Z,1510157133.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:33.856Z,1510157133.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:34.260Z,1510157134.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:34.649Z,1510157134.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:35.047Z,1510157135.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:35.460Z,1510157135.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:35.900Z,1510157135.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:36.260Z,1510157136.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:36.660Z,1510157136.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:37.080Z,1510157137.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:37.457Z,1510157137.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:37.860Z,1510157137.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:38.306Z,1510157138.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:38.703Z,1510157138.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:39.075Z,1510157139.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:39.461Z,1510157139.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:39.860Z,1510157139.860 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:39.860Z,1510157139.860 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54
2017-11-08T16:05:39.860Z,1510157139.860 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T16:05:39.862Z,1510157139.862 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:39.862Z,1510157139.862 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54
2017-11-08T16:05:39.862Z,1510157139.862 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T16:05:39.864Z,1510157139.864 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:39.864Z,1510157139.864 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 54
2017-11-08T16:05:39.864Z,1510157139.864 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T16:05:39.941Z,1510157139.941 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T16:05:39.941Z,1510157139.941 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T16:05:39.942Z,1510157139.942 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T16:05:40.333Z,1510157140.333 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T16:05:40.333Z,1510157140.333 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54
2017-11-08T16:05:40.333Z,1510157140.333 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T16:05:40.333Z,1510157140.333 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54
2017-11-08T16:05:40.334Z,1510157140.334 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T16:05:40.334Z,1510157140.334 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 54
2017-11-08T16:05:40.644Z,1510157140.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T16:05:40.645Z,1510157140.645 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:05:40.645Z,1510157140.645 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:05:40.646Z,1510157140.646 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T16:05:40.646Z,1510157140.646 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:05:40.646Z,1510157140.646 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:05:40.647Z,1510157140.647 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T16:05:40.647Z,1510157140.647 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:05:40.647Z,1510157140.647 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:05:41.042Z,1510157141.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T16:05:41.043Z,1510157141.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:41.475Z,1510157141.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T16:05:41.476Z,1510157141.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:41.869Z,1510157141.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T16:05:41.870Z,1510157141.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:42.270Z,1510157142.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T16:05:42.271Z,1510157142.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:42.645Z,1510157142.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T16:05:42.646Z,1510157142.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:43.048Z,1510157143.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T16:05:43.049Z,1510157143.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:43.470Z,1510157143.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T16:05:43.471Z,1510157143.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:43.873Z,1510157143.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T16:05:43.874Z,1510157143.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:44.275Z,1510157144.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T16:05:44.276Z,1510157144.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:44.644Z,1510157144.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T16:05:44.645Z,1510157144.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:45.043Z,1510157145.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T16:05:45.044Z,1510157145.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:45.467Z,1510157145.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T16:05:45.468Z,1510157145.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:45.878Z,1510157145.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T16:05:45.879Z,1510157145.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:46.250Z,1510157146.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T16:05:46.251Z,1510157146.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:46.642Z,1510157146.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T16:05:46.643Z,1510157146.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:47.047Z,1510157147.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T16:05:47.048Z,1510157147.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:47.482Z,1510157147.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T16:05:47.483Z,1510157147.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:47.852Z,1510157147.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T16:05:47.853Z,1510157147.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:48.255Z,1510157148.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T16:05:48.256Z,1510157148.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:48.647Z,1510157148.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T16:05:48.648Z,1510157148.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:49.047Z,1510157149.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T16:05:49.048Z,1510157149.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:49.455Z,1510157149.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T16:05:49.456Z,1510157149.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:49.854Z,1510157149.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T16:05:49.855Z,1510157149.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:50.255Z,1510157150.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T16:05:50.256Z,1510157150.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:50.646Z,1510157150.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T16:05:50.647Z,1510157150.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:51.046Z,1510157151.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T16:05:51.047Z,1510157151.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:51.451Z,1510157151.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T16:05:51.452Z,1510157151.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:51.856Z,1510157151.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T16:05:51.857Z,1510157151.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:52.251Z,1510157152.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T16:05:52.251Z,1510157152.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:52.647Z,1510157152.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T16:05:52.648Z,1510157152.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:53.043Z,1510157153.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T16:05:53.044Z,1510157153.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:53.455Z,1510157153.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T16:05:53.456Z,1510157153.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:53.853Z,1510157153.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T16:05:53.854Z,1510157153.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:54.255Z,1510157154.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T16:05:54.256Z,1510157154.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:54.646Z,1510157154.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T16:05:54.647Z,1510157154.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:55.042Z,1510157155.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T16:05:55.043Z,1510157155.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:55.461Z,1510157155.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T16:05:55.462Z,1510157155.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:55.859Z,1510157155.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T16:05:55.860Z,1510157155.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:56.259Z,1510157156.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T16:05:56.260Z,1510157156.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:56.652Z,1510157156.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T16:05:56.653Z,1510157156.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:57.051Z,1510157157.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T16:05:57.052Z,1510157157.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:57.459Z,1510157157.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T16:05:57.460Z,1510157157.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:57.858Z,1510157157.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T16:05:57.859Z,1510157157.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:58.295Z,1510157158.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T16:05:58.296Z,1510157158.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:58.652Z,1510157158.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T16:05:58.653Z,1510157158.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:59.051Z,1510157159.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T16:05:59.053Z,1510157159.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:59.507Z,1510157159.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T16:05:59.508Z,1510157159.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:05:59.864Z,1510157159.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:02.983Z,1510157162.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:03.154Z,1510157163.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:03.559Z,1510157163.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:03.935Z,1510157163.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:04.326Z,1510157164.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:04.733Z,1510157164.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:05.162Z,1510157165.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:05.538Z,1510157165.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:05.927Z,1510157165.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:06.326Z,1510157166.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:06.728Z,1510157166.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:07.125Z,1510157167.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:07.538Z,1510157167.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:07.938Z,1510157167.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:08.333Z,1510157168.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:08.726Z,1510157168.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:09.126Z,1510157169.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:09.525Z,1510157169.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:09.926Z,1510157169.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:10.328Z,1510157170.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:10.733Z,1510157170.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:11.137Z,1510157171.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:11.534Z,1510157171.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:11.955Z,1510157171.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:12.329Z,1510157172.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:12.728Z,1510157172.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:13.128Z,1510157173.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:13.538Z,1510157173.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:13.938Z,1510157173.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:14.337Z,1510157174.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:14.735Z,1510157174.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:15.129Z,1510157175.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:15.527Z,1510157175.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:15.929Z,1510157175.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:16.336Z,1510157176.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:16.732Z,1510157176.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:17.138Z,1510157177.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:17.534Z,1510157177.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:17.926Z,1510157177.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:18.328Z,1510157178.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:18.727Z,1510157178.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:19.127Z,1510157179.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:19.538Z,1510157179.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:19.938Z,1510157179.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:20.339Z,1510157180.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:20.729Z,1510157180.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:21.128Z,1510157181.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:21.535Z,1510157181.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:21.929Z,1510157181.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:22.329Z,1510157182.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:22.771Z,1510157182.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:23.144Z,1510157183.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:23.539Z,1510157183.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:23.927Z,1510157183.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:24.329Z,1510157184.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:24.731Z,1510157184.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:25.126Z,1510157185.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:25.543Z,1510157185.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:25.942Z,1510157185.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:26.347Z,1510157186.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:26.731Z,1510157186.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:27.124Z,1510157187.124 [BPC1](ERROR): Failed to receive battery data
2017-11-08T16:06:27.124Z,1510157187.124 [BPC1] Communications Fault, FailCount= 1
2017-11-08T16:06:27.124Z,1510157187.124 [BPC1](ERROR): Communications Fault
2017-11-08T16:06:27.133Z,1510157187.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:27.209Z,1510157187.209 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T16:06:27.528Z,1510157187.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:27.936Z,1510157187.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:28.330Z,1510157188.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:28.413Z,1510157188.413 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T16:06:28.413Z,1510157188.413 [BPC1] No Fault, FailCount= 1
2017-11-08T16:06:28.792Z,1510157188.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:29.143Z,1510157189.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:29.543Z,1510157189.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:29.938Z,1510157189.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:30.337Z,1510157190.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:30.742Z,1510157190.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:31.132Z,1510157191.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:31.537Z,1510157191.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:31.943Z,1510157191.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:32.340Z,1510157192.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:32.728Z,1510157192.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:33.130Z,1510157193.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:33.532Z,1510157193.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:33.931Z,1510157193.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:34.330Z,1510157194.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:34.739Z,1510157194.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:35.139Z,1510157195.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:35.543Z,1510157195.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:35.931Z,1510157195.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:36.335Z,1510157196.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:36.731Z,1510157196.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:37.161Z,1510157197.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:37.544Z,1510157197.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:37.940Z,1510157197.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:38.344Z,1510157198.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:38.726Z,1510157198.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:39.135Z,1510157199.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:39.531Z,1510157199.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:39.926Z,1510157199.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:40.330Z,1510157200.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:40.739Z,1510157200.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:41.138Z,1510157201.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:41.538Z,1510157201.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:41.931Z,1510157201.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:42.367Z,1510157202.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:42.730Z,1510157202.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:43.129Z,1510157203.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:43.536Z,1510157203.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:43.938Z,1510157203.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:44.343Z,1510157204.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:44.730Z,1510157204.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:45.131Z,1510157205.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:45.530Z,1510157205.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:45.931Z,1510157205.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:46.330Z,1510157206.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:46.743Z,1510157206.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:47.139Z,1510157207.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:47.543Z,1510157207.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:47.949Z,1510157207.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:48.329Z,1510157208.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:48.731Z,1510157208.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:49.129Z,1510157209.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:49.579Z,1510157209.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:49.947Z,1510157209.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:50.379Z,1510157210.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:50.730Z,1510157210.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:51.131Z,1510157211.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:51.526Z,1510157211.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:51.930Z,1510157211.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:52.330Z,1510157212.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:52.747Z,1510157212.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:53.139Z,1510157213.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:53.543Z,1510157213.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:53.927Z,1510157213.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:54.326Z,1510157214.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:54.731Z,1510157214.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:55.131Z,1510157215.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:55.537Z,1510157215.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:55.947Z,1510157215.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:56.340Z,1510157216.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:56.726Z,1510157216.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:57.136Z,1510157217.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:57.529Z,1510157217.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:57.930Z,1510157217.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:58.330Z,1510157218.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:58.772Z,1510157218.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:59.148Z,1510157219.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:59.547Z,1510157219.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:59.551Z,1510157219.551 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T16:06:59.551Z,1510157219.551 [Default:CheckIn:C.Wait] Stopped
2017-11-08T16:06:59.551Z,1510157219.551 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T16:06:59.551Z,1510157219.551 [Default:CheckIn:D] Running Loop=1
2017-11-08T16:06:59.934Z,1510157219.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:06:59.937Z,1510157219.937 [Default:CheckIn:D] Stopped
2017-11-08T16:06:59.937Z,1510157219.937 [Default:CheckIn:E] Running Loop=1
2017-11-08T16:07:03.026Z,1510157223.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:03.029Z,1510157223.029 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 160.315951 min 
2017-11-08T16:07:03.030Z,1510157223.030 [Default:CheckIn:E] Stopped
2017-11-08T16:07:03.030Z,1510157223.030 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T16:07:03.030Z,1510157223.030 [Default:CheckIn] Stopped
2017-11-08T16:07:03.030Z,1510157223.030 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T16:07:03.030Z,1510157223.030 [Default:CheckIn](INFO): Running loop #4
2017-11-08T16:07:03.030Z,1510157223.030 [Default:CheckIn] Running Loop=4
2017-11-08T16:07:03.030Z,1510157223.030 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T16:07:03.030Z,1510157223.030 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T16:07:03.180Z,1510157223.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:03.575Z,1510157223.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:03.983Z,1510157223.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:04.374Z,1510157224.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:04.759Z,1510157224.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:05.187Z,1510157225.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:05.559Z,1510157225.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:05.964Z,1510157225.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:06.359Z,1510157226.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:06.784Z,1510157226.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:07.184Z,1510157227.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:07.584Z,1510157227.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:07.964Z,1510157227.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:08.358Z,1510157228.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:08.762Z,1510157228.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:09.164Z,1510157229.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:09.605Z,1510157229.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:09.987Z,1510157229.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:10.390Z,1510157230.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:10.799Z,1510157230.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:11.173Z,1510157231.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:11.567Z,1510157231.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:11.995Z,1510157231.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:12.368Z,1510157232.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:12.799Z,1510157232.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:13.174Z,1510157233.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:13.570Z,1510157233.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:13.968Z,1510157233.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:14.362Z,1510157234.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:14.764Z,1510157234.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:15.164Z,1510157235.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:15.572Z,1510157235.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:15.972Z,1510157235.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:16.371Z,1510157236.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:16.762Z,1510157236.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:17.159Z,1510157237.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:17.562Z,1510157237.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:17.957Z,1510157237.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:18.367Z,1510157238.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:18.770Z,1510157238.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:19.170Z,1510157239.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:19.568Z,1510157239.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:19.962Z,1510157239.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:20.357Z,1510157240.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:20.762Z,1510157240.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:21.203Z,1510157241.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:21.570Z,1510157241.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:21.976Z,1510157241.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:22.370Z,1510157242.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:22.758Z,1510157242.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:23.157Z,1510157243.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:23.567Z,1510157243.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:23.962Z,1510157243.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:24.367Z,1510157244.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:24.775Z,1510157244.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:25.175Z,1510157245.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:25.567Z,1510157245.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:25.968Z,1510157245.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:26.362Z,1510157246.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:26.757Z,1510157246.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:27.161Z,1510157247.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:27.570Z,1510157247.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:27.976Z,1510157247.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:28.376Z,1510157248.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:28.759Z,1510157248.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:29.158Z,1510157249.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:29.562Z,1510157249.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:29.962Z,1510157249.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:30.357Z,1510157250.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:30.771Z,1510157250.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:31.175Z,1510157251.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:31.626Z,1510157251.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:31.962Z,1510157251.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:32.362Z,1510157252.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:32.758Z,1510157252.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:33.207Z,1510157253.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:33.579Z,1510157253.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:33.979Z,1510157253.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:34.408Z,1510157254.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:34.764Z,1510157254.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:35.198Z,1510157255.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:35.563Z,1510157255.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:35.961Z,1510157255.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:36.367Z,1510157256.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:36.775Z,1510157256.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:37.176Z,1510157257.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:37.568Z,1510157257.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:37.962Z,1510157257.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:38.360Z,1510157258.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:38.761Z,1510157258.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:39.162Z,1510157259.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:39.580Z,1510157259.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:39.979Z,1510157259.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:40.371Z,1510157260.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:40.767Z,1510157260.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:41.161Z,1510157261.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:41.561Z,1510157261.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:41.963Z,1510157261.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:42.367Z,1510157262.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:42.771Z,1510157262.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:43.172Z,1510157263.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:43.608Z,1510157263.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:43.963Z,1510157263.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:44.365Z,1510157264.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:44.767Z,1510157264.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:45.167Z,1510157265.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:45.576Z,1510157265.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:45.975Z,1510157265.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:46.372Z,1510157266.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:46.766Z,1510157266.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:47.166Z,1510157267.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:47.565Z,1510157267.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:47.965Z,1510157267.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:48.360Z,1510157268.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:48.776Z,1510157268.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:49.177Z,1510157269.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:49.573Z,1510157269.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:49.971Z,1510157269.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:50.371Z,1510157270.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:50.761Z,1510157270.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:51.165Z,1510157271.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:51.573Z,1510157271.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:51.973Z,1510157271.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:52.373Z,1510157272.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:52.768Z,1510157272.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:53.160Z,1510157273.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:53.571Z,1510157273.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:53.961Z,1510157273.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:54.384Z,1510157274.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:54.774Z,1510157274.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:55.194Z,1510157275.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:55.579Z,1510157275.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:55.969Z,1510157275.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:56.387Z,1510157276.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:56.768Z,1510157276.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:57.188Z,1510157277.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:57.572Z,1510157277.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:57.972Z,1510157277.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:58.371Z,1510157278.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:58.769Z,1510157278.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:59.167Z,1510157279.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:59.566Z,1510157279.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:07:59.973Z,1510157279.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:03.068Z,1510157283.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:03.243Z,1510157283.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:03.631Z,1510157283.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:04.032Z,1510157284.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:04.425Z,1510157284.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:04.803Z,1510157284.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:05.243Z,1510157285.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:05.623Z,1510157285.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:06.023Z,1510157286.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:06.422Z,1510157286.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:06.803Z,1510157286.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:07.203Z,1510157287.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:07.603Z,1510157287.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:08.004Z,1510157288.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:08.399Z,1510157288.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:08.829Z,1510157288.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:09.226Z,1510157289.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:09.629Z,1510157289.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:10.007Z,1510157290.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:10.411Z,1510157290.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:10.806Z,1510157290.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:11.208Z,1510157291.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:11.614Z,1510157291.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:11.966Z,1510157291.966 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T16:08:11.967Z,1510157291.967 [NAL9602] Data Fault, FailCount= 1
2017-11-08T16:08:11.967Z,1510157291.967 [NAL9602](ERROR): Data Fault
2017-11-08T16:08:12.020Z,1510157292.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:12.097Z,1510157292.097 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T16:08:12.370Z,1510157292.370 [NAL9602](INFO): Powering down
2017-11-08T16:08:12.420Z,1510157292.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:12.808Z,1510157292.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:13.207Z,1510157293.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:13.289Z,1510157293.289 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T16:08:13.289Z,1510157293.289 [NAL9602] No Fault, FailCount= 1
2017-11-08T16:08:13.609Z,1510157293.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:14.013Z,1510157294.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:14.415Z,1510157294.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:14.809Z,1510157294.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:15.215Z,1510157295.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:15.608Z,1510157295.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:16.036Z,1510157296.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:16.409Z,1510157296.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:16.829Z,1510157296.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:17.211Z,1510157297.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:17.639Z,1510157297.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:18.019Z,1510157298.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:18.440Z,1510157298.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:18.820Z,1510157298.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:19.198Z,1510157299.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:19.620Z,1510157299.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:20.020Z,1510157300.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:20.422Z,1510157300.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:20.819Z,1510157300.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:21.226Z,1510157301.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:21.623Z,1510157301.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:22.020Z,1510157302.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:22.420Z,1510157302.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:22.798Z,1510157302.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:23.220Z,1510157303.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:23.620Z,1510157303.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:24.023Z,1510157304.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:24.420Z,1510157304.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:24.820Z,1510157304.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:25.222Z,1510157305.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:25.620Z,1510157305.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:26.020Z,1510157306.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:26.422Z,1510157306.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:26.842Z,1510157306.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:27.231Z,1510157307.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:27.619Z,1510157307.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:28.021Z,1510157308.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:28.421Z,1510157308.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:28.821Z,1510157308.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:29.216Z,1510157309.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:29.604Z,1510157309.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:30.003Z,1510157310.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:30.400Z,1510157310.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:30.804Z,1510157310.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:31.229Z,1510157311.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:31.604Z,1510157311.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:32.019Z,1510157312.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:32.408Z,1510157312.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:32.803Z,1510157312.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:33.208Z,1510157313.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:33.606Z,1510157313.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:34.003Z,1510157314.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:34.412Z,1510157314.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:34.807Z,1510157314.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:35.207Z,1510157315.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:35.607Z,1510157315.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:36.007Z,1510157316.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:36.406Z,1510157316.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:36.799Z,1510157316.799 [BPC1](ERROR): Failed to parse message.
2017-11-08T16:08:36.799Z,1510157316.799 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-08T16:08:36.799Z,1510157316.799 [BPC1] Data Fault, FailCount= 1
2017-11-08T16:08:36.799Z,1510157316.799 [BPC1](ERROR): Data Fault
2017-11-08T16:08:36.809Z,1510157316.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:36.893Z,1510157316.893 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T16:08:37.212Z,1510157317.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:37.605Z,1510157317.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:38.009Z,1510157318.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:38.089Z,1510157318.089 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T16:08:38.089Z,1510157318.089 [BPC1] No Fault, FailCount= 1
2017-11-08T16:08:38.449Z,1510157318.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:38.808Z,1510157318.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:39.208Z,1510157319.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:39.589Z,1510157319.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:39.611Z,1510157319.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:39.989Z,1510157319.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:40.005Z,1510157320.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:40.392Z,1510157320.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:40.408Z,1510157320.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:40.788Z,1510157320.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:40.811Z,1510157320.811 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:40.811Z,1510157320.811 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55
2017-11-08T16:08:40.811Z,1510157320.811 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T16:08:40.813Z,1510157320.813 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:40.813Z,1510157320.813 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55
2017-11-08T16:08:40.813Z,1510157320.813 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T16:08:40.815Z,1510157320.815 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:40.815Z,1510157320.815 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 55
2017-11-08T16:08:40.815Z,1510157320.815 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T16:08:40.897Z,1510157320.897 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T16:08:40.897Z,1510157320.897 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T16:08:40.897Z,1510157320.897 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T16:08:41.190Z,1510157321.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:41.285Z,1510157321.285 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T16:08:41.285Z,1510157321.285 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55
2017-11-08T16:08:41.285Z,1510157321.285 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T16:08:41.286Z,1510157321.286 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55
2017-11-08T16:08:41.286Z,1510157321.286 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T16:08:41.286Z,1510157321.286 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 55
2017-11-08T16:08:41.590Z,1510157321.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:41.618Z,1510157321.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T16:08:41.619Z,1510157321.619 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:08:41.619Z,1510157321.619 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:08:41.620Z,1510157321.620 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T16:08:41.620Z,1510157321.620 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:08:41.621Z,1510157321.621 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:08:41.621Z,1510157321.621 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T16:08:41.621Z,1510157321.621 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:08:41.622Z,1510157321.622 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:08:41.983Z,1510157321.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:42.014Z,1510157322.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T16:08:42.015Z,1510157322.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:42.383Z,1510157322.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:42.408Z,1510157322.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T16:08:42.409Z,1510157322.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:42.770Z,1510157322.770 [NAL9602](INFO): Powering up NAL9602
2017-11-08T16:08:42.788Z,1510157322.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:42.819Z,1510157322.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T16:08:42.820Z,1510157322.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:43.183Z,1510157323.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:43.213Z,1510157323.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T16:08:43.214Z,1510157323.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:43.583Z,1510157323.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:43.613Z,1510157323.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T16:08:43.614Z,1510157323.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:43.986Z,1510157323.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:44.015Z,1510157324.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T16:08:44.016Z,1510157324.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:44.383Z,1510157324.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:44.412Z,1510157324.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T16:08:44.413Z,1510157324.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:44.787Z,1510157324.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:44.811Z,1510157324.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T16:08:44.812Z,1510157324.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:45.187Z,1510157325.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:45.219Z,1510157325.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T16:08:45.220Z,1510157325.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:45.583Z,1510157325.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:45.617Z,1510157325.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T16:08:45.618Z,1510157325.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:45.987Z,1510157325.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:46.011Z,1510157326.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T16:08:46.012Z,1510157326.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:46.386Z,1510157326.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:46.415Z,1510157326.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T16:08:46.416Z,1510157326.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:46.786Z,1510157326.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:46.837Z,1510157326.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T16:08:46.838Z,1510157326.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:47.183Z,1510157327.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:47.211Z,1510157327.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T16:08:47.212Z,1510157327.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:47.587Z,1510157327.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:47.619Z,1510157327.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T16:08:47.620Z,1510157327.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:47.983Z,1510157327.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:48.023Z,1510157328.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T16:08:48.024Z,1510157328.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:48.387Z,1510157328.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:48.419Z,1510157328.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T16:08:48.419Z,1510157328.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:48.787Z,1510157328.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:48.823Z,1510157328.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T16:08:48.824Z,1510157328.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:49.186Z,1510157329.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:49.202Z,1510157329.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T16:08:49.203Z,1510157329.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:49.591Z,1510157329.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:49.611Z,1510157329.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T16:08:49.612Z,1510157329.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:49.990Z,1510157329.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:50.006Z,1510157330.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T16:08:50.007Z,1510157330.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:50.385Z,1510157330.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:50.401Z,1510157330.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T16:08:50.402Z,1510157330.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:50.788Z,1510157330.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:50.803Z,1510157330.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T16:08:50.805Z,1510157330.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:51.190Z,1510157331.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:51.206Z,1510157331.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T16:08:51.207Z,1510157331.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:51.587Z,1510157331.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:51.640Z,1510157331.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T16:08:51.641Z,1510157331.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:51.990Z,1510157331.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:52.006Z,1510157332.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T16:08:52.006Z,1510157332.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:52.393Z,1510157332.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:52.409Z,1510157332.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T16:08:52.409Z,1510157332.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:52.788Z,1510157332.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:52.811Z,1510157332.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T16:08:52.812Z,1510157332.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:53.188Z,1510157333.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:53.205Z,1510157333.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T16:08:53.206Z,1510157333.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:53.602Z,1510157333.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:53.618Z,1510157333.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T16:08:53.619Z,1510157333.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:53.970Z,1510157333.970 [NAL9602](INFO): NAL9602 initialized
2017-11-08T16:08:53.996Z,1510157333.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:54.011Z,1510157334.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T16:08:54.012Z,1510157334.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:54.393Z,1510157334.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:54.409Z,1510157334.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T16:08:54.410Z,1510157334.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:54.801Z,1510157334.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:54.817Z,1510157334.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T16:08:54.818Z,1510157334.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:55.197Z,1510157335.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:55.213Z,1510157335.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T16:08:55.214Z,1510157335.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:55.594Z,1510157335.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:55.610Z,1510157335.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T16:08:55.611Z,1510157335.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:55.992Z,1510157335.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:56.008Z,1510157336.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T16:08:56.009Z,1510157336.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:56.396Z,1510157336.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:56.419Z,1510157336.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T16:08:56.420Z,1510157336.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:56.801Z,1510157336.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:56.817Z,1510157336.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T16:08:56.818Z,1510157336.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:57.202Z,1510157337.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:57.218Z,1510157337.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T16:08:57.219Z,1510157337.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:57.593Z,1510157337.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:57.608Z,1510157337.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T16:08:57.609Z,1510157337.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:57.990Z,1510157337.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:58.006Z,1510157338.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T16:08:58.007Z,1510157338.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:58.402Z,1510157338.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:58.418Z,1510157338.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T16:08:58.418Z,1510157338.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:58.801Z,1510157338.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:58.859Z,1510157338.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T16:08:58.860Z,1510157338.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:59.204Z,1510157339.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:59.220Z,1510157339.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T16:08:59.221Z,1510157339.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:59.594Z,1510157339.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:08:59.658Z,1510157339.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T16:08:59.659Z,1510157339.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:08:59.997Z,1510157339.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:00.019Z,1510157340.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T16:09:00.020Z,1510157340.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:03.078Z,1510157343.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:03.150Z,1510157343.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:03.291Z,1510157343.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:03.308Z,1510157343.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:03.678Z,1510157343.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:03.703Z,1510157343.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:04.065Z,1510157344.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:04.083Z,1510157344.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:04.465Z,1510157344.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:04.481Z,1510157344.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:04.866Z,1510157344.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:04.881Z,1510157344.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:05.267Z,1510157345.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:05.283Z,1510157345.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:05.675Z,1510157345.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:05.708Z,1510157345.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:06.071Z,1510157346.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:06.086Z,1510157346.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:06.473Z,1510157346.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:06.502Z,1510157346.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:06.862Z,1510157346.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:06.879Z,1510157346.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:07.263Z,1510157347.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:07.281Z,1510157347.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:07.665Z,1510157347.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:07.681Z,1510157347.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:08.065Z,1510157348.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:08.082Z,1510157348.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:08.473Z,1510157348.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:08.489Z,1510157348.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:08.875Z,1510157348.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:08.891Z,1510157348.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:09.274Z,1510157349.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:09.312Z,1510157349.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:09.668Z,1510157349.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:09.683Z,1510157349.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:10.063Z,1510157350.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:10.080Z,1510157350.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:10.466Z,1510157350.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:10.488Z,1510157350.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:10.867Z,1510157350.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:10.883Z,1510157350.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:11.265Z,1510157351.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:11.323Z,1510157351.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:11.678Z,1510157351.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:11.694Z,1510157351.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:12.075Z,1510157352.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:12.095Z,1510157352.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:12.474Z,1510157352.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:12.491Z,1510157352.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:12.866Z,1510157352.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:12.883Z,1510157352.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:13.266Z,1510157353.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:13.282Z,1510157353.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:13.670Z,1510157353.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:13.686Z,1510157353.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:14.067Z,1510157354.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:14.087Z,1510157354.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:14.481Z,1510157354.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:14.518Z,1510157354.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:14.873Z,1510157354.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:14.890Z,1510157354.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:15.274Z,1510157355.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:15.295Z,1510157355.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:15.668Z,1510157355.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:15.684Z,1510157355.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:16.067Z,1510157356.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:16.083Z,1510157356.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:16.466Z,1510157356.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:16.482Z,1510157356.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:16.869Z,1510157356.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:16.885Z,1510157356.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:17.271Z,1510157357.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:17.287Z,1510157357.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:17.682Z,1510157357.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:17.715Z,1510157357.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:18.074Z,1510157358.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:18.090Z,1510157358.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:18.475Z,1510157358.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:18.492Z,1510157358.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:18.869Z,1510157358.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:18.890Z,1510157358.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:19.267Z,1510157359.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:19.287Z,1510157359.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:19.671Z,1510157359.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:19.688Z,1510157359.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:20.072Z,1510157360.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:20.089Z,1510157360.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:20.474Z,1510157360.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:20.492Z,1510157360.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:20.874Z,1510157360.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:20.890Z,1510157360.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:21.278Z,1510157361.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:21.295Z,1510157361.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:21.668Z,1510157361.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:21.685Z,1510157361.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:22.071Z,1510157362.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:22.089Z,1510157362.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:22.468Z,1510157362.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:22.485Z,1510157362.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:22.869Z,1510157362.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:22.885Z,1510157362.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:23.268Z,1510157363.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:23.344Z,1510157363.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:23.679Z,1510157363.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:23.696Z,1510157363.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:24.078Z,1510157364.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:24.122Z,1510157364.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:24.479Z,1510157364.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:24.496Z,1510157364.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:24.856Z,1510157364.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:24.923Z,1510157364.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:25.267Z,1510157365.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:25.283Z,1510157365.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:25.665Z,1510157365.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:25.681Z,1510157365.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:26.069Z,1510157366.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:26.086Z,1510157366.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:26.475Z,1510157366.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:26.490Z,1510157366.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:26.880Z,1510157366.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:26.896Z,1510157366.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:27.278Z,1510157367.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:27.294Z,1510157367.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:27.669Z,1510157367.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:27.685Z,1510157367.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:28.055Z,1510157368.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:28.094Z,1510157368.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:28.468Z,1510157368.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:28.484Z,1510157368.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:28.868Z,1510157368.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:28.884Z,1510157368.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:29.270Z,1510157369.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:29.286Z,1510157369.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:29.678Z,1510157369.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:29.708Z,1510157369.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:30.080Z,1510157370.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:30.096Z,1510157370.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:30.476Z,1510157370.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:30.493Z,1510157370.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:30.863Z,1510157370.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:30.889Z,1510157370.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:31.259Z,1510157371.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:31.287Z,1510157371.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:31.659Z,1510157371.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:31.685Z,1510157371.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:32.062Z,1510157372.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:32.087Z,1510157372.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:32.479Z,1510157372.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:32.495Z,1510157372.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:32.883Z,1510157372.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:32.899Z,1510157372.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:33.278Z,1510157373.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:33.332Z,1510157373.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:33.662Z,1510157373.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:33.689Z,1510157373.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:34.063Z,1510157374.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:34.089Z,1510157374.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:34.461Z,1510157374.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:34.489Z,1510157374.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:34.862Z,1510157374.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:34.886Z,1510157374.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:35.261Z,1510157375.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:35.287Z,1510157375.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:35.683Z,1510157375.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:35.703Z,1510157375.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:36.082Z,1510157376.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:36.097Z,1510157376.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:36.477Z,1510157376.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:36.494Z,1510157376.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:36.862Z,1510157376.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:36.890Z,1510157376.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:37.263Z,1510157377.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:37.287Z,1510157377.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:37.661Z,1510157377.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:37.690Z,1510157377.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:38.058Z,1510157378.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:38.090Z,1510157378.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:38.479Z,1510157378.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:38.495Z,1510157378.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:38.884Z,1510157378.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:38.900Z,1510157378.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:39.278Z,1510157379.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:39.307Z,1510157379.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:39.657Z,1510157379.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:39.689Z,1510157379.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:40.058Z,1510157380.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:40.090Z,1510157380.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:40.463Z,1510157380.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:40.494Z,1510157380.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:40.861Z,1510157380.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:40.893Z,1510157380.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:41.258Z,1510157381.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:41.291Z,1510157381.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:41.674Z,1510157381.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:41.704Z,1510157381.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:42.084Z,1510157382.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:42.107Z,1510157382.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:42.471Z,1510157382.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:42.497Z,1510157382.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:42.862Z,1510157382.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:42.894Z,1510157382.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:43.261Z,1510157383.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:43.278Z,1510157383.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:43.665Z,1510157383.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:43.698Z,1510157383.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:44.060Z,1510157384.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:44.079Z,1510157384.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:44.470Z,1510157384.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:44.506Z,1510157384.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:44.877Z,1510157384.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:44.932Z,1510157384.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:45.278Z,1510157385.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:45.327Z,1510157385.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:45.664Z,1510157385.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:45.682Z,1510157385.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:46.064Z,1510157386.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:46.115Z,1510157386.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:46.461Z,1510157386.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:46.485Z,1510157386.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:46.863Z,1510157386.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:46.915Z,1510157386.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:47.263Z,1510157387.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:47.281Z,1510157387.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:47.674Z,1510157387.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:47.708Z,1510157387.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:48.077Z,1510157388.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:48.108Z,1510157388.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:48.473Z,1510157388.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:48.498Z,1510157388.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:48.864Z,1510157388.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:48.882Z,1510157388.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:49.264Z,1510157389.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:49.281Z,1510157389.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:49.666Z,1510157389.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:49.682Z,1510157389.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:50.066Z,1510157390.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:50.082Z,1510157390.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:50.475Z,1510157390.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:50.492Z,1510157390.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:50.871Z,1510157390.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:50.887Z,1510157390.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:51.274Z,1510157391.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:51.290Z,1510157391.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:51.665Z,1510157391.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:51.681Z,1510157391.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:52.068Z,1510157392.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:52.085Z,1510157392.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:52.467Z,1510157392.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:52.484Z,1510157392.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:52.869Z,1510157392.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:52.885Z,1510157392.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:53.266Z,1510157393.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:53.283Z,1510157393.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:53.677Z,1510157393.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:53.705Z,1510157393.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:54.074Z,1510157394.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:54.090Z,1510157394.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:54.472Z,1510157394.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:54.489Z,1510157394.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:54.872Z,1510157394.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:54.888Z,1510157394.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:55.269Z,1510157395.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:55.319Z,1510157395.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:55.673Z,1510157395.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:55.689Z,1510157395.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:56.066Z,1510157396.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:56.086Z,1510157396.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:56.476Z,1510157396.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:56.492Z,1510157396.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:56.879Z,1510157396.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:56.900Z,1510157396.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:57.279Z,1510157397.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:57.295Z,1510157397.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:57.662Z,1510157397.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:57.685Z,1510157397.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:58.068Z,1510157398.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:58.085Z,1510157398.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:58.469Z,1510157398.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:58.490Z,1510157398.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:58.865Z,1510157398.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:58.886Z,1510157398.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:59.267Z,1510157399.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:59.292Z,1510157399.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:09:59.678Z,1510157399.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:09:59.700Z,1510157399.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:00.078Z,1510157400.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:00.094Z,1510157400.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:03.171Z,1510157403.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:03.192Z,1510157403.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:03.333Z,1510157403.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:03.350Z,1510157403.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:03.732Z,1510157403.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:03.750Z,1510157403.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:04.128Z,1510157404.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:04.145Z,1510157404.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:04.538Z,1510157404.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:04.574Z,1510157404.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:04.938Z,1510157404.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:04.971Z,1510157404.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:05.337Z,1510157405.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:05.355Z,1510157405.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:05.730Z,1510157405.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:05.747Z,1510157405.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:06.126Z,1510157406.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:06.142Z,1510157406.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:06.526Z,1510157406.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:06.552Z,1510157406.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:06.929Z,1510157406.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:06.999Z,1510157406.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:07.329Z,1510157407.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:07.391Z,1510157407.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:07.739Z,1510157407.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:07.757Z,1510157407.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:08.143Z,1510157408.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:08.195Z,1510157408.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:08.539Z,1510157408.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:08.557Z,1510157408.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:08.919Z,1510157408.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:08.984Z,1510157408.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:09.323Z,1510157409.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:09.359Z,1510157409.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:09.719Z,1510157409.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:09.744Z,1510157409.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:10.123Z,1510157410.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:10.150Z,1510157410.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:10.540Z,1510157410.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:10.556Z,1510157410.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:10.939Z,1510157410.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:10.959Z,1510157410.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:11.339Z,1510157411.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:11.356Z,1510157411.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:11.723Z,1510157411.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:11.756Z,1510157411.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:12.119Z,1510157412.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:12.156Z,1510157412.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:12.519Z,1510157412.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:12.552Z,1510157412.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:12.924Z,1510157412.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:12.956Z,1510157412.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:13.319Z,1510157413.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:13.339Z,1510157413.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:13.737Z,1510157413.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:13.763Z,1510157413.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:14.137Z,1510157414.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:14.167Z,1510157414.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:14.529Z,1510157414.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:14.562Z,1510157414.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:14.923Z,1510157414.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:14.939Z,1510157414.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:15.319Z,1510157415.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:15.340Z,1510157415.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:15.726Z,1510157415.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:15.766Z,1510157415.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:16.123Z,1510157416.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:16.140Z,1510157416.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:16.538Z,1510157416.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:16.562Z,1510157416.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:16.941Z,1510157416.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:16.964Z,1510157416.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:17.337Z,1510157417.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:17.391Z,1510157417.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:17.722Z,1510157417.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:17.739Z,1510157417.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:18.127Z,1510157418.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:18.143Z,1510157418.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:18.522Z,1510157418.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:18.538Z,1510157418.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:18.927Z,1510157418.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:18.944Z,1510157418.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:19.322Z,1510157419.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:19.337Z,1510157419.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:19.741Z,1510157419.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:19.772Z,1510157419.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:20.138Z,1510157420.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:20.160Z,1510157420.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:20.537Z,1510157420.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:20.562Z,1510157420.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:20.927Z,1510157420.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:20.943Z,1510157420.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:21.323Z,1510157421.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:21.340Z,1510157421.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:21.723Z,1510157421.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:21.739Z,1510157421.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:22.127Z,1510157422.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:22.143Z,1510157422.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:22.538Z,1510157422.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:22.568Z,1510157422.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:22.937Z,1510157422.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:22.969Z,1510157422.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:23.337Z,1510157423.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:23.370Z,1510157423.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:23.726Z,1510157423.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:23.743Z,1510157423.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:24.126Z,1510157424.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:24.141Z,1510157424.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:24.527Z,1510157424.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:24.543Z,1510157424.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:24.927Z,1510157424.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:24.948Z,1510157424.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:25.326Z,1510157425.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:25.342Z,1510157425.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:25.738Z,1510157425.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:25.770Z,1510157425.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:26.138Z,1510157426.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:26.168Z,1510157426.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:26.536Z,1510157426.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:26.570Z,1510157426.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:26.926Z,1510157426.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:26.943Z,1510157426.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:27.326Z,1510157427.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:27.343Z,1510157427.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:27.722Z,1510157427.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:27.743Z,1510157427.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:28.127Z,1510157428.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:28.143Z,1510157428.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:28.538Z,1510157428.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:28.573Z,1510157428.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:28.933Z,1510157428.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:29.016Z,1510157429.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:29.338Z,1510157429.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:29.354Z,1510157429.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:29.728Z,1510157429.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:29.783Z,1510157429.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:30.124Z,1510157430.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:30.140Z,1510157430.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:30.529Z,1510157430.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:30.582Z,1510157430.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:30.929Z,1510157430.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:30.951Z,1510157430.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:31.325Z,1510157431.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:31.340Z,1510157431.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:31.738Z,1510157431.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:31.754Z,1510157431.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:32.137Z,1510157432.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:32.154Z,1510157432.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:32.533Z,1510157432.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:32.555Z,1510157432.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:32.929Z,1510157432.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:32.945Z,1510157432.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:33.328Z,1510157433.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:33.344Z,1510157433.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:33.725Z,1510157433.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:33.741Z,1510157433.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:34.130Z,1510157434.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:34.146Z,1510157434.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:34.538Z,1510157434.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:34.554Z,1510157434.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:34.937Z,1510157434.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:34.953Z,1510157434.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:35.338Z,1510157435.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:35.354Z,1510157435.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:35.728Z,1510157435.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:35.744Z,1510157435.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:36.127Z,1510157436.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:36.143Z,1510157436.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:36.529Z,1510157436.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:36.551Z,1510157436.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:36.930Z,1510157436.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:36.947Z,1510157436.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:37.326Z,1510157437.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:37.342Z,1510157437.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:37.738Z,1510157437.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:37.754Z,1510157437.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:38.146Z,1510157438.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:38.177Z,1510157438.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:38.533Z,1510157438.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:38.555Z,1510157438.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:38.930Z,1510157438.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:38.982Z,1510157438.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:39.330Z,1510157439.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:39.346Z,1510157439.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:39.731Z,1510157439.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:39.751Z,1510157439.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:40.132Z,1510157440.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:40.149Z,1510157440.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:40.538Z,1510157440.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:40.554Z,1510157440.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:40.936Z,1510157440.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:40.952Z,1510157440.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:41.338Z,1510157441.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:41.354Z,1510157441.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:41.730Z,1510157441.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:41.747Z,1510157441.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:42.127Z,1510157442.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:42.143Z,1510157442.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:42.526Z,1510157442.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:42.544Z,1510157442.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:42.928Z,1510157442.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:42.954Z,1510157442.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:43.332Z,1510157443.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:43.349Z,1510157443.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:43.735Z,1510157443.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:43.753Z,1510157443.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:44.138Z,1510157444.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:44.155Z,1510157444.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:44.534Z,1510157444.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:44.552Z,1510157444.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:44.930Z,1510157444.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:44.947Z,1510157444.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:45.330Z,1510157445.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:45.346Z,1510157445.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:45.730Z,1510157445.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:45.745Z,1510157445.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:46.130Z,1510157446.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:46.151Z,1510157446.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:46.538Z,1510157446.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:46.555Z,1510157446.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:46.937Z,1510157446.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:46.954Z,1510157446.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:47.339Z,1510157447.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:47.356Z,1510157447.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:47.730Z,1510157447.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:47.746Z,1510157447.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:48.127Z,1510157448.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:48.158Z,1510157448.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:48.530Z,1510157448.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:48.547Z,1510157448.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:48.927Z,1510157448.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:48.948Z,1510157448.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:49.327Z,1510157449.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:49.347Z,1510157449.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:49.739Z,1510157449.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:49.760Z,1510157449.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:50.137Z,1510157450.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:50.154Z,1510157450.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:50.538Z,1510157450.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:50.554Z,1510157450.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:50.926Z,1510157450.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:51.011Z,1510157451.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:51.327Z,1510157451.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:51.348Z,1510157451.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:51.729Z,1510157451.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:51.746Z,1510157451.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:52.125Z,1510157452.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:52.187Z,1510157452.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:52.543Z,1510157452.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:52.564Z,1510157452.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:52.942Z,1510157452.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:52.995Z,1510157452.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:53.340Z,1510157453.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:53.357Z,1510157453.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:53.727Z,1510157453.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:53.748Z,1510157453.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:54.129Z,1510157454.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:54.145Z,1510157454.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:54.519Z,1510157454.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:54.554Z,1510157454.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:54.927Z,1510157454.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:54.949Z,1510157454.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:55.329Z,1510157455.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:55.345Z,1510157455.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:55.740Z,1510157455.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:55.757Z,1510157455.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:56.142Z,1510157456.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:56.158Z,1510157456.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:56.539Z,1510157456.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:56.555Z,1510157456.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:56.919Z,1510157456.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:56.945Z,1510157456.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:57.329Z,1510157457.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:57.345Z,1510157457.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:57.729Z,1510157457.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:57.745Z,1510157457.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:58.119Z,1510157458.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:58.155Z,1510157458.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:58.542Z,1510157458.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:58.558Z,1510157458.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:58.939Z,1510157458.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:58.955Z,1510157458.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:59.340Z,1510157459.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:59.356Z,1510157459.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:10:59.733Z,1510157459.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:10:59.749Z,1510157459.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:00.129Z,1510157460.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:00.151Z,1510157460.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:03.207Z,1510157463.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:03.255Z,1510157463.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:03.368Z,1510157463.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:03.399Z,1510157463.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:03.789Z,1510157463.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:03.805Z,1510157463.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:04.192Z,1510157464.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:04.209Z,1510157464.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:04.589Z,1510157464.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:04.605Z,1510157464.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:04.967Z,1510157464.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:05.001Z,1510157465.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:05.363Z,1510157465.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:05.401Z,1510157465.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:05.768Z,1510157465.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:05.802Z,1510157465.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:06.163Z,1510157466.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:06.191Z,1510157466.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:06.578Z,1510157466.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:06.606Z,1510157466.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:06.982Z,1510157466.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:07.014Z,1510157467.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:07.377Z,1510157467.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:07.411Z,1510157467.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:07.763Z,1510157467.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:07.781Z,1510157467.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:08.167Z,1510157468.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:08.206Z,1510157468.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:08.567Z,1510157468.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:08.583Z,1510157468.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:08.963Z,1510157468.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:08.980Z,1510157468.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:09.382Z,1510157469.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:09.414Z,1510157469.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:09.782Z,1510157469.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:09.807Z,1510157469.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:10.182Z,1510157470.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:10.209Z,1510157470.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:10.568Z,1510157470.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:10.602Z,1510157470.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:10.967Z,1510157470.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:10.984Z,1510157470.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:11.378Z,1510157471.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:11.410Z,1510157471.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:11.782Z,1510157471.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:11.806Z,1510157471.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:12.182Z,1510157472.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:12.213Z,1510157472.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:12.567Z,1510157472.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:12.584Z,1510157472.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:12.971Z,1510157472.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:12.988Z,1510157472.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:13.378Z,1510157473.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:13.410Z,1510157473.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:13.782Z,1510157473.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:13.806Z,1510157473.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:14.186Z,1510157474.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:14.203Z,1510157474.203 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T16:11:14.203Z,1510157474.203 [BPC1] Data Fault, FailCount= 1
2017-11-08T16:11:14.204Z,1510157474.204 [BPC1](ERROR): Data Fault
2017-11-08T16:11:14.213Z,1510157474.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:14.297Z,1510157474.297 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T16:11:14.569Z,1510157474.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:14.586Z,1510157474.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:14.964Z,1510157474.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:14.981Z,1510157474.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:15.382Z,1510157475.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:15.413Z,1510157475.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:15.497Z,1510157475.497 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T16:11:15.497Z,1510157475.497 [BPC1] No Fault, FailCount= 1
2017-11-08T16:11:15.777Z,1510157475.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:15.854Z,1510157475.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:16.182Z,1510157476.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:16.213Z,1510157476.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:16.571Z,1510157476.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:16.588Z,1510157476.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:16.971Z,1510157476.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:16.986Z,1510157476.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:17.382Z,1510157477.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:17.414Z,1510157477.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:17.786Z,1510157477.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:17.810Z,1510157477.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:18.182Z,1510157478.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:18.218Z,1510157478.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:18.572Z,1510157478.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:18.589Z,1510157478.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:18.972Z,1510157478.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:18.988Z,1510157478.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:19.382Z,1510157479.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:19.412Z,1510157479.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:19.782Z,1510157479.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:19.818Z,1510157479.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:20.183Z,1510157480.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:20.213Z,1510157480.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:20.572Z,1510157480.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:20.587Z,1510157480.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:20.967Z,1510157480.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:20.985Z,1510157480.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:21.382Z,1510157481.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:21.417Z,1510157481.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:21.786Z,1510157481.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:21.809Z,1510157481.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:22.178Z,1510157482.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:22.202Z,1510157482.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:22.573Z,1510157482.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:22.590Z,1510157482.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:22.972Z,1510157482.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:22.988Z,1510157482.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:23.390Z,1510157483.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:23.415Z,1510157483.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:23.786Z,1510157483.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:23.817Z,1510157483.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:24.183Z,1510157484.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:24.229Z,1510157484.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:24.572Z,1510157484.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:24.589Z,1510157484.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:24.972Z,1510157484.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:24.989Z,1510157484.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:25.383Z,1510157485.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:25.419Z,1510157485.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:25.783Z,1510157485.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:25.816Z,1510157485.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:26.187Z,1510157486.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:26.221Z,1510157486.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:26.573Z,1510157486.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:26.596Z,1510157486.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:26.971Z,1510157486.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:26.988Z,1510157486.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:27.378Z,1510157487.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:27.396Z,1510157487.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:27.782Z,1510157487.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:27.798Z,1510157487.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:28.179Z,1510157488.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:28.196Z,1510157488.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:28.574Z,1510157488.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:28.590Z,1510157488.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:28.974Z,1510157488.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:28.990Z,1510157488.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:29.379Z,1510157489.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:29.395Z,1510157489.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:29.783Z,1510157489.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:29.799Z,1510157489.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:30.177Z,1510157490.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:30.199Z,1510157490.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:30.574Z,1510157490.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:30.591Z,1510157490.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:30.973Z,1510157490.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:30.990Z,1510157490.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:31.378Z,1510157491.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:31.394Z,1510157491.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:31.778Z,1510157491.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:31.794Z,1510157491.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:32.178Z,1510157492.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:32.195Z,1510157492.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:32.574Z,1510157492.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:32.590Z,1510157492.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:32.973Z,1510157492.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:32.990Z,1510157492.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:33.382Z,1510157493.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:33.399Z,1510157493.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:33.782Z,1510157493.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:33.798Z,1510157493.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:34.182Z,1510157494.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:34.198Z,1510157494.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:34.573Z,1510157494.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:34.593Z,1510157494.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:34.972Z,1510157494.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:34.989Z,1510157494.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:35.378Z,1510157495.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:35.395Z,1510157495.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:35.782Z,1510157495.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:35.799Z,1510157495.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:36.178Z,1510157496.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:36.251Z,1510157496.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:36.574Z,1510157496.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:36.643Z,1510157496.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:36.966Z,1510157496.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:36.992Z,1510157496.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:37.381Z,1510157497.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:37.432Z,1510157497.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:37.785Z,1510157497.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:37.801Z,1510157497.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:38.187Z,1510157498.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:38.243Z,1510157498.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:38.574Z,1510157498.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:38.596Z,1510157498.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:38.975Z,1510157498.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:38.991Z,1510157498.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:39.383Z,1510157499.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:39.400Z,1510157499.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:39.787Z,1510157499.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:39.807Z,1510157499.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:40.185Z,1510157500.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:40.201Z,1510157500.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:40.575Z,1510157500.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:40.595Z,1510157500.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:40.972Z,1510157500.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:40.993Z,1510157500.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:41.385Z,1510157501.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:41.401Z,1510157501.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:41.786Z,1510157501.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:41.803Z,1510157501.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:41.803Z,1510157501.803 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56
2017-11-08T16:11:41.803Z,1510157501.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T16:11:41.805Z,1510157501.805 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:41.805Z,1510157501.805 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56
2017-11-08T16:11:41.805Z,1510157501.805 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T16:11:41.807Z,1510157501.807 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:41.807Z,1510157501.807 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 56
2017-11-08T16:11:41.807Z,1510157501.807 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T16:11:41.881Z,1510157501.881 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T16:11:41.881Z,1510157501.881 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T16:11:41.881Z,1510157501.881 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T16:11:42.183Z,1510157502.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:42.278Z,1510157502.278 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T16:11:42.278Z,1510157502.278 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56
2017-11-08T16:11:42.278Z,1510157502.278 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T16:11:42.278Z,1510157502.278 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56
2017-11-08T16:11:42.279Z,1510157502.279 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T16:11:42.279Z,1510157502.279 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 56
2017-11-08T16:11:42.564Z,1510157502.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:42.598Z,1510157502.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T16:11:42.598Z,1510157502.598 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:11:42.598Z,1510157502.598 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:11:42.599Z,1510157502.599 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T16:11:42.599Z,1510157502.599 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:11:42.599Z,1510157502.599 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:11:42.600Z,1510157502.600 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T16:11:42.600Z,1510157502.600 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:11:42.601Z,1510157502.601 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:11:42.963Z,1510157502.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:42.998Z,1510157502.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T16:11:42.999Z,1510157502.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:43.384Z,1510157503.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:43.399Z,1510157503.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T16:11:43.400Z,1510157503.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:43.785Z,1510157503.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:43.800Z,1510157503.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T16:11:43.801Z,1510157503.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:44.189Z,1510157504.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:44.205Z,1510157504.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T16:11:44.206Z,1510157504.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:44.568Z,1510157504.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:44.593Z,1510157504.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T16:11:44.594Z,1510157504.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:44.967Z,1510157504.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:44.994Z,1510157504.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T16:11:44.995Z,1510157504.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:45.385Z,1510157505.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:45.401Z,1510157505.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T16:11:45.402Z,1510157505.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:45.788Z,1510157505.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:45.804Z,1510157505.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T16:11:45.805Z,1510157505.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:46.185Z,1510157506.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:46.201Z,1510157506.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T16:11:46.202Z,1510157506.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:46.567Z,1510157506.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:46.623Z,1510157506.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T16:11:46.624Z,1510157506.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:46.967Z,1510157506.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:46.999Z,1510157506.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T16:11:46.000Z,1510157507.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:47.385Z,1510157507.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:47.401Z,1510157507.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T16:11:47.402Z,1510157507.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:47.789Z,1510157507.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:47.805Z,1510157507.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T16:11:47.806Z,1510157507.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:48.189Z,1510157508.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:48.205Z,1510157508.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T16:11:48.206Z,1510157508.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:48.568Z,1510157508.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:48.595Z,1510157508.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T16:11:48.596Z,1510157508.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:48.967Z,1510157508.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:49.001Z,1510157509.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T16:11:49.002Z,1510157509.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:49.385Z,1510157509.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:49.400Z,1510157509.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T16:11:49.401Z,1510157509.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:49.785Z,1510157509.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:49.801Z,1510157509.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T16:11:49.802Z,1510157509.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:50.189Z,1510157510.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:50.205Z,1510157510.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T16:11:50.206Z,1510157510.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:50.568Z,1510157510.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:50.602Z,1510157510.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T16:11:50.602Z,1510157510.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:50.967Z,1510157510.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:50.994Z,1510157510.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T16:11:50.995Z,1510157510.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:51.385Z,1510157511.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:51.401Z,1510157511.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T16:11:51.402Z,1510157511.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:51.789Z,1510157511.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:51.805Z,1510157511.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T16:11:51.806Z,1510157511.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:52.185Z,1510157512.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:52.201Z,1510157512.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T16:11:52.202Z,1510157512.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:52.568Z,1510157512.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:52.601Z,1510157512.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T16:11:52.602Z,1510157512.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:52.967Z,1510157512.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:53.001Z,1510157513.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T16:11:53.002Z,1510157513.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:53.389Z,1510157513.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:53.405Z,1510157513.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T16:11:53.406Z,1510157513.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:53.789Z,1510157513.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:53.805Z,1510157513.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T16:11:53.806Z,1510157513.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:54.182Z,1510157514.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:54.203Z,1510157514.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T16:11:54.205Z,1510157514.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:54.568Z,1510157514.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:54.599Z,1510157514.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T16:11:54.600Z,1510157514.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:54.967Z,1510157514.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:55.003Z,1510157515.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T16:11:55.004Z,1510157515.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:55.382Z,1510157515.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:55.404Z,1510157515.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T16:11:55.405Z,1510157515.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:55.785Z,1510157515.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:55.801Z,1510157515.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T16:11:55.802Z,1510157515.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:56.189Z,1510157516.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:56.205Z,1510157516.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T16:11:56.206Z,1510157516.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:56.568Z,1510157516.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:56.602Z,1510157516.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T16:11:56.603Z,1510157516.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:56.967Z,1510157516.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:56.999Z,1510157516.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T16:11:56.000Z,1510157517.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:57.389Z,1510157517.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:57.405Z,1510157517.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T16:11:57.406Z,1510157517.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:57.789Z,1510157517.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:57.805Z,1510157517.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T16:11:57.806Z,1510157517.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:58.189Z,1510157518.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:58.205Z,1510157518.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T16:11:58.206Z,1510157518.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:58.568Z,1510157518.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:58.635Z,1510157518.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T16:11:58.636Z,1510157518.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:58.971Z,1510157518.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:58.987Z,1510157518.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T16:11:58.988Z,1510157518.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:59.382Z,1510157519.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:59.435Z,1510157519.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T16:11:59.436Z,1510157519.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:11:59.786Z,1510157519.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:11:59.811Z,1510157519.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T16:11:59.812Z,1510157519.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:00.183Z,1510157520.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:00.231Z,1510157520.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T16:12:00.233Z,1510157520.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:03.250Z,1510157523.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:03.271Z,1510157523.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:03.275Z,1510157523.275 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T16:07:03.0Z
2017-11-08T16:12:03.275Z,1510157523.275 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T16:12:03.275Z,1510157523.275 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T16:12:03.379Z,1510157523.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:03.412Z,1510157523.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:04.067Z,1510157524.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:04.083Z,1510157524.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:04.206Z,1510157524.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:04.239Z,1510157524.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:04.610Z,1510157524.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:04.626Z,1510157524.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:04.990Z,1510157524.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:05.022Z,1510157525.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:08.072Z,1510157528.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:08.089Z,1510157528.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:08.199Z,1510157528.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:08.276Z,1510157528.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:08.583Z,1510157528.583 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171108T132236/Courier0016.lzma
2017-11-08T16:12:08.642Z,1510157528.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:08.672Z,1510157528.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:09.021Z,1510157529.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:09.038Z,1510157529.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:09.377Z,1510157529.377 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0016.lzma.bak
2017-11-08T16:12:09.378Z,1510157529.378 [DataOverHttps](INFO): SBD MOMSN=5222944
2017-11-08T16:12:09.428Z,1510157529.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:09.461Z,1510157529.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:10.340Z,1510157530.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:10.374Z,1510157530.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:10.487Z,1510157530.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:10.527Z,1510157530.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:13.583Z,1510157533.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:13.599Z,1510157533.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:13.730Z,1510157533.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:13.766Z,1510157533.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:14.146Z,1510157534.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:14.178Z,1510157534.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:14.545Z,1510157534.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:14.578Z,1510157534.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:14.946Z,1510157534.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:14.977Z,1510157534.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:15.334Z,1510157535.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:15.351Z,1510157535.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:18.437Z,1510157538.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:18.473Z,1510157538.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:18.585Z,1510157538.585 [DataOverHttps](INFO): Sending 221 bytes from file Logs/20171108T132236/Express0017.lzma
2017-11-08T16:12:18.611Z,1510157538.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:18.651Z,1510157538.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:19.014Z,1510157539.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:19.046Z,1510157539.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:19.379Z,1510157539.379 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0017.lzma.bak
2017-11-08T16:12:19.379Z,1510157539.379 [DataOverHttps](INFO): SBD MOMSN=5222946
2017-11-08T16:12:19.421Z,1510157539.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:19.459Z,1510157539.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:20.350Z,1510157540.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:20.424Z,1510157540.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:20.437Z,1510157540.437 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T16:12:20.437Z,1510157540.437 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T16:12:20.437Z,1510157540.437 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T16:12:20.554Z,1510157540.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:20.570Z,1510157540.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:23.641Z,1510157543.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:23.694Z,1510157543.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:23.811Z,1510157543.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:23.855Z,1510157543.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:24.236Z,1510157544.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:24.292Z,1510157544.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:24.640Z,1510157544.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:24.659Z,1510157544.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:25.026Z,1510157545.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:25.055Z,1510157545.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:25.415Z,1510157545.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:25.449Z,1510157545.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:25.816Z,1510157545.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:25.852Z,1510157545.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:26.211Z,1510157546.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:26.247Z,1510157546.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:26.626Z,1510157546.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:26.651Z,1510157546.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:27.029Z,1510157547.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:27.054Z,1510157547.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:27.422Z,1510157547.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:27.454Z,1510157547.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:27.815Z,1510157547.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:27.835Z,1510157547.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:28.219Z,1510157548.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:28.235Z,1510157548.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:28.616Z,1510157548.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:28.632Z,1510157548.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:29.019Z,1510157549.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:29.039Z,1510157549.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:29.429Z,1510157549.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:29.467Z,1510157549.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:29.829Z,1510157549.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:29.862Z,1510157549.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:30.238Z,1510157550.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:30.311Z,1510157550.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:30.619Z,1510157550.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:30.639Z,1510157550.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:31.017Z,1510157551.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:31.033Z,1510157551.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:31.418Z,1510157551.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:31.435Z,1510157551.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:31.819Z,1510157551.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:31.836Z,1510157551.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:32.217Z,1510157552.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:32.233Z,1510157552.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:32.629Z,1510157552.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:32.675Z,1510157552.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:33.033Z,1510157553.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:33.073Z,1510157553.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:33.430Z,1510157553.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:33.446Z,1510157553.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:33.817Z,1510157553.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:33.834Z,1510157553.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:34.219Z,1510157554.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:34.240Z,1510157554.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:34.619Z,1510157554.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:34.639Z,1510157554.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:35.018Z,1510157555.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:35.035Z,1510157555.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:35.430Z,1510157555.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:35.446Z,1510157555.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:35.830Z,1510157555.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:35.846Z,1510157555.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:36.234Z,1510157556.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:36.266Z,1510157556.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:36.621Z,1510157556.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:36.643Z,1510157556.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:37.021Z,1510157557.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:37.037Z,1510157557.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:37.420Z,1510157557.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:37.437Z,1510157557.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:37.822Z,1510157557.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:37.839Z,1510157557.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:38.220Z,1510157558.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:38.237Z,1510157558.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:38.626Z,1510157558.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:38.642Z,1510157558.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:39.029Z,1510157559.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:39.046Z,1510157559.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:39.426Z,1510157559.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:39.442Z,1510157559.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:39.821Z,1510157559.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:39.837Z,1510157559.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:40.222Z,1510157560.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:40.243Z,1510157560.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:40.621Z,1510157560.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:40.638Z,1510157560.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:41.021Z,1510157561.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:41.037Z,1510157561.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:41.430Z,1510157561.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:41.446Z,1510157561.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:41.830Z,1510157561.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:41.846Z,1510157561.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:42.226Z,1510157562.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:42.242Z,1510157562.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:42.622Z,1510157562.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:42.639Z,1510157562.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:43.021Z,1510157563.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:43.038Z,1510157563.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:43.422Z,1510157563.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:43.439Z,1510157563.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:43.817Z,1510157563.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:43.844Z,1510157563.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:44.221Z,1510157564.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:44.243Z,1510157564.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:44.626Z,1510157564.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:44.695Z,1510157564.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:45.030Z,1510157565.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:45.099Z,1510157565.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:45.432Z,1510157565.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:45.449Z,1510157565.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:45.827Z,1510157565.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:45.843Z,1510157565.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:46.221Z,1510157566.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:46.275Z,1510157566.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:46.624Z,1510157566.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:46.647Z,1510157566.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:47.021Z,1510157567.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:47.075Z,1510157567.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:47.437Z,1510157567.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:47.453Z,1510157567.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:47.830Z,1510157567.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:47.859Z,1510157567.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:48.234Z,1510157568.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:48.254Z,1510157568.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:48.611Z,1510157568.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:48.641Z,1510157568.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:49.015Z,1510157569.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:49.056Z,1510157569.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:49.137Z,1510157569.137 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T16:12:49.415Z,1510157569.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:49.453Z,1510157569.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:49.812Z,1510157569.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:49.853Z,1510157569.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:50.216Z,1510157570.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:50.253Z,1510157570.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:50.626Z,1510157570.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:50.653Z,1510157570.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:51.029Z,1510157571.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:51.056Z,1510157571.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:51.426Z,1510157571.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:51.456Z,1510157571.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:51.815Z,1510157571.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:51.832Z,1510157571.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:52.215Z,1510157572.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:52.231Z,1510157572.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:52.615Z,1510157572.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:52.635Z,1510157572.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:53.019Z,1510157573.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:53.039Z,1510157573.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:53.430Z,1510157573.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:53.467Z,1510157573.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:53.825Z,1510157573.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:53.842Z,1510157573.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:54.234Z,1510157574.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:54.268Z,1510157574.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:54.618Z,1510157574.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:54.634Z,1510157574.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:55.017Z,1510157575.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:55.033Z,1510157575.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:55.418Z,1510157575.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:55.479Z,1510157575.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:55.819Z,1510157575.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:55.835Z,1510157575.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:56.216Z,1510157576.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:56.239Z,1510157576.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:56.630Z,1510157576.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:56.646Z,1510157576.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:57.025Z,1510157577.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:57.041Z,1510157577.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:57.430Z,1510157577.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:57.446Z,1510157577.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:57.817Z,1510157577.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:57.834Z,1510157577.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:58.217Z,1510157578.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:58.233Z,1510157578.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:58.616Z,1510157578.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:58.636Z,1510157578.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:59.019Z,1510157579.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:59.039Z,1510157579.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:59.425Z,1510157579.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:59.441Z,1510157579.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:12:59.826Z,1510157579.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:12:59.842Z,1510157579.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:00.234Z,1510157580.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:00.266Z,1510157580.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:00.618Z,1510157580.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:00.634Z,1510157580.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:01.021Z,1510157581.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:01.037Z,1510157581.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:01.420Z,1510157581.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:01.437Z,1510157581.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:01.819Z,1510157581.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:01.839Z,1510157581.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:02.221Z,1510157582.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:02.237Z,1510157582.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:02.626Z,1510157582.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:02.642Z,1510157582.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:03.025Z,1510157583.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:03.041Z,1510157583.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:03.426Z,1510157583.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:03.442Z,1510157583.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:03.821Z,1510157583.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:03.837Z,1510157583.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:04.219Z,1510157584.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:04.297Z,1510157584.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:04.618Z,1510157584.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:04.674Z,1510157584.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:05.016Z,1510157585.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:05.072Z,1510157585.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:05.431Z,1510157585.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:05.447Z,1510157585.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:05.836Z,1510157585.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:05.852Z,1510157585.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:06.228Z,1510157586.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:06.256Z,1510157586.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:06.622Z,1510157586.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:06.643Z,1510157586.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:07.022Z,1510157587.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:07.039Z,1510157587.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:07.419Z,1510157587.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:07.502Z,1510157587.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:07.816Z,1510157587.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:07.841Z,1510157587.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:08.215Z,1510157588.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:08.285Z,1510157588.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:08.632Z,1510157588.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:08.649Z,1510157588.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:09.032Z,1510157589.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:09.080Z,1510157589.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:09.436Z,1510157589.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:09.452Z,1510157589.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:09.815Z,1510157589.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:09.840Z,1510157589.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:10.215Z,1510157590.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:10.240Z,1510157590.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:10.616Z,1510157590.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:10.641Z,1510157590.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:11.015Z,1510157591.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:11.040Z,1510157591.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:11.432Z,1510157591.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:11.448Z,1510157591.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:11.835Z,1510157591.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:11.852Z,1510157591.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:12.232Z,1510157592.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:12.248Z,1510157592.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:12.611Z,1510157592.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:12.639Z,1510157592.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:13.015Z,1510157593.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:13.045Z,1510157593.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:13.415Z,1510157593.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:13.445Z,1510157593.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:13.816Z,1510157593.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:13.846Z,1510157593.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:14.215Z,1510157594.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:14.245Z,1510157594.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:14.632Z,1510157594.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:14.648Z,1510157594.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:15.036Z,1510157595.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:15.051Z,1510157595.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:15.435Z,1510157595.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:15.451Z,1510157595.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:15.815Z,1510157595.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:15.845Z,1510157595.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:16.215Z,1510157596.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:16.246Z,1510157596.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:16.616Z,1510157596.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:16.664Z,1510157596.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:17.015Z,1510157597.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:17.050Z,1510157597.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:17.433Z,1510157597.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:17.485Z,1510157597.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:17.836Z,1510157597.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:17.852Z,1510157597.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:18.232Z,1510157598.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:18.248Z,1510157598.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:18.615Z,1510157598.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:18.646Z,1510157598.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:19.015Z,1510157599.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:19.045Z,1510157599.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:19.415Z,1510157599.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:19.445Z,1510157599.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:19.816Z,1510157599.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:19.846Z,1510157599.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:20.215Z,1510157600.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:20.245Z,1510157600.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:20.635Z,1510157600.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:20.651Z,1510157600.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:21.039Z,1510157601.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:21.055Z,1510157601.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:24.114Z,1510157604.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:24.146Z,1510157604.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:24.263Z,1510157604.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:24.299Z,1510157604.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:24.664Z,1510157604.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:24.697Z,1510157604.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:25.064Z,1510157605.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:25.080Z,1510157605.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:25.474Z,1510157605.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:25.506Z,1510157605.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:25.873Z,1510157605.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:25.910Z,1510157605.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:26.274Z,1510157606.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:26.310Z,1510157606.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:26.663Z,1510157606.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:26.684Z,1510157606.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:27.063Z,1510157607.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:27.079Z,1510157607.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:27.467Z,1510157607.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:27.487Z,1510157607.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:27.864Z,1510157607.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:27.880Z,1510157607.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:28.264Z,1510157608.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:28.280Z,1510157608.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:28.678Z,1510157608.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:28.712Z,1510157608.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:29.078Z,1510157609.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:29.109Z,1510157609.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:29.477Z,1510157609.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:29.583Z,1510157609.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:29.865Z,1510157609.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:29.881Z,1510157609.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:30.264Z,1510157610.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:30.288Z,1510157610.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:30.663Z,1510157610.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:30.711Z,1510157610.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:31.063Z,1510157611.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:31.081Z,1510157611.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:31.470Z,1510157611.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:31.530Z,1510157611.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:31.870Z,1510157611.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:31.900Z,1510157611.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:32.271Z,1510157612.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:32.292Z,1510157612.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:32.659Z,1510157612.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:32.684Z,1510157612.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:33.055Z,1510157613.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:33.071Z,1510157613.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:33.459Z,1510157613.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:33.485Z,1510157613.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:33.869Z,1510157613.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:33.905Z,1510157613.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:34.256Z,1510157614.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:34.275Z,1510157614.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:34.670Z,1510157614.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:34.695Z,1510157614.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:35.078Z,1510157615.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:35.105Z,1510157615.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:35.478Z,1510157615.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:35.504Z,1510157615.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:35.863Z,1510157615.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:35.910Z,1510157615.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:36.260Z,1510157616.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:36.310Z,1510157616.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:36.659Z,1510157616.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:36.680Z,1510157616.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:37.063Z,1510157617.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:37.084Z,1510157617.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:37.474Z,1510157617.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:37.506Z,1510157617.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:37.873Z,1510157617.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:37.889Z,1510157617.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:38.266Z,1510157618.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:38.282Z,1510157618.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:38.658Z,1510157618.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:38.674Z,1510157618.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:39.062Z,1510157619.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:39.083Z,1510157619.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:39.458Z,1510157619.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:39.486Z,1510157619.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:39.865Z,1510157619.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:39.924Z,1510157619.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:40.264Z,1510157620.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:40.280Z,1510157620.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:40.670Z,1510157620.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:40.686Z,1510157620.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:41.073Z,1510157621.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:41.090Z,1510157621.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:41.473Z,1510157621.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:41.495Z,1510157621.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:41.861Z,1510157621.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:41.877Z,1510157621.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:42.264Z,1510157622.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:42.287Z,1510157622.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:42.666Z,1510157622.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:42.681Z,1510157622.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:43.061Z,1510157623.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:43.077Z,1510157623.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:43.466Z,1510157623.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:43.482Z,1510157623.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:43.873Z,1510157623.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:43.889Z,1510157623.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:44.266Z,1510157624.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:44.287Z,1510157624.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:44.664Z,1510157624.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:44.680Z,1510157624.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:45.064Z,1510157625.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:45.080Z,1510157625.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:45.458Z,1510157625.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:45.486Z,1510157625.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:45.865Z,1510157625.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:45.881Z,1510157625.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:46.262Z,1510157626.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:46.283Z,1510157626.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:46.670Z,1510157626.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:46.686Z,1510157626.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:47.074Z,1510157627.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:47.090Z,1510157627.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:47.469Z,1510157627.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:47.491Z,1510157627.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:47.865Z,1510157627.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:47.881Z,1510157627.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:48.263Z,1510157628.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:48.284Z,1510157628.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:48.662Z,1510157628.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:48.678Z,1510157628.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:49.059Z,1510157629.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:49.080Z,1510157629.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:49.470Z,1510157629.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:49.492Z,1510157629.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:49.871Z,1510157629.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:49.891Z,1510157629.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:50.270Z,1510157630.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:50.292Z,1510157630.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:50.663Z,1510157630.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:50.684Z,1510157630.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:51.066Z,1510157631.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:51.082Z,1510157631.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:51.459Z,1510157631.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:51.535Z,1510157631.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:51.866Z,1510157631.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:51.939Z,1510157631.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:52.266Z,1510157632.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:52.282Z,1510157632.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:52.674Z,1510157632.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:52.728Z,1510157632.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:53.074Z,1510157633.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:53.095Z,1510157633.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:53.475Z,1510157633.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:53.525Z,1510157633.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:53.865Z,1510157633.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:53.881Z,1510157633.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:54.264Z,1510157634.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:54.281Z,1510157634.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:54.667Z,1510157634.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:54.683Z,1510157634.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:55.058Z,1510157635.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:55.088Z,1510157635.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:55.474Z,1510157635.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:55.491Z,1510157635.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:55.874Z,1510157635.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:55.890Z,1510157635.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:56.272Z,1510157636.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:56.288Z,1510157636.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:56.665Z,1510157636.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:56.681Z,1510157636.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:57.066Z,1510157637.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:57.082Z,1510157637.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:57.465Z,1510157637.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:57.481Z,1510157637.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:57.863Z,1510157637.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:57.892Z,1510157637.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:58.266Z,1510157638.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:58.282Z,1510157638.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:58.670Z,1510157638.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:58.690Z,1510157638.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:59.078Z,1510157639.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:59.094Z,1510157639.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:59.476Z,1510157639.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:59.492Z,1510157639.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:13:59.855Z,1510157639.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:13:59.886Z,1510157639.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:00.263Z,1510157640.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:00.284Z,1510157640.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:00.666Z,1510157640.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:00.682Z,1510157640.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:01.055Z,1510157641.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:01.085Z,1510157641.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:01.475Z,1510157641.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:01.491Z,1510157641.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:01.878Z,1510157641.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:01.922Z,1510157641.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:02.275Z,1510157642.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:02.292Z,1510157642.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:02.663Z,1510157642.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:02.684Z,1510157642.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:03.066Z,1510157643.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:03.081Z,1510157643.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:03.455Z,1510157643.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:03.490Z,1510157643.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:03.861Z,1510157643.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:03.885Z,1510157643.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:04.255Z,1510157644.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:04.280Z,1510157644.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:04.675Z,1510157644.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:04.695Z,1510157644.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:05.078Z,1510157645.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:05.095Z,1510157645.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:05.479Z,1510157645.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:05.495Z,1510157645.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:05.866Z,1510157645.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:05.888Z,1510157645.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:06.266Z,1510157646.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:06.282Z,1510157646.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:06.656Z,1510157646.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:06.700Z,1510157646.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:07.055Z,1510157647.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:07.082Z,1510157647.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:07.476Z,1510157647.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:07.492Z,1510157647.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:07.877Z,1510157647.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:07.893Z,1510157647.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:08.270Z,1510157648.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:08.299Z,1510157648.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:08.660Z,1510157648.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:08.697Z,1510157648.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:09.057Z,1510157649.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:09.095Z,1510157649.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:09.461Z,1510157649.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:09.497Z,1510157649.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:09.862Z,1510157649.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:09.886Z,1510157649.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:10.260Z,1510157650.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:10.279Z,1510157650.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:10.675Z,1510157650.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:10.707Z,1510157650.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:11.078Z,1510157651.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:11.112Z,1510157651.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:11.474Z,1510157651.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:11.507Z,1510157651.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:11.863Z,1510157651.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:11.880Z,1510157651.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:12.263Z,1510157652.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:12.280Z,1510157652.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:12.663Z,1510157652.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:12.680Z,1510157652.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:13.062Z,1510157653.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:13.080Z,1510157653.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:13.474Z,1510157653.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:13.529Z,1510157653.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:13.873Z,1510157653.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:13.913Z,1510157653.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:14.274Z,1510157654.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:14.309Z,1510157654.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:14.663Z,1510157654.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:14.720Z,1510157654.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:15.062Z,1510157655.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:15.078Z,1510157655.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:15.462Z,1510157655.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:15.519Z,1510157655.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:15.863Z,1510157655.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:15.880Z,1510157655.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:16.262Z,1510157656.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:16.278Z,1510157656.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:16.666Z,1510157656.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:16.683Z,1510157656.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:17.074Z,1510157657.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:17.106Z,1510157657.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:17.473Z,1510157657.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:17.490Z,1510157657.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:17.860Z,1510157657.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:17.876Z,1510157657.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:18.262Z,1510157658.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:18.278Z,1510157658.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:18.662Z,1510157658.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:18.677Z,1510157658.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:19.062Z,1510157659.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:19.078Z,1510157659.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:19.474Z,1510157659.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:19.490Z,1510157659.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:19.873Z,1510157659.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:19.889Z,1510157659.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:20.270Z,1510157660.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:20.286Z,1510157660.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:20.666Z,1510157660.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:20.682Z,1510157660.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:21.066Z,1510157661.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:21.082Z,1510157661.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:24.155Z,1510157664.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:24.215Z,1510157664.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:24.331Z,1510157664.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:24.372Z,1510157664.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:24.756Z,1510157664.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:24.773Z,1510157664.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:25.156Z,1510157665.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:25.172Z,1510157665.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:25.538Z,1510157665.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:25.574Z,1510157665.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:25.927Z,1510157665.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:25.943Z,1510157665.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:26.327Z,1510157666.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:26.343Z,1510157666.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:26.732Z,1510157666.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:26.748Z,1510157666.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:27.127Z,1510157667.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:27.143Z,1510157667.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:27.538Z,1510157667.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:27.570Z,1510157667.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:27.949Z,1510157667.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:27.976Z,1510157667.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:28.349Z,1510157668.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:28.374Z,1510157668.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:28.730Z,1510157668.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:28.747Z,1510157668.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:29.130Z,1510157669.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:29.147Z,1510157669.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:29.535Z,1510157669.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:29.551Z,1510157669.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:29.930Z,1510157669.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:29.947Z,1510157669.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:30.346Z,1510157670.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:30.380Z,1510157670.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:30.745Z,1510157670.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:30.776Z,1510157670.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:31.146Z,1510157671.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:31.176Z,1510157671.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:31.535Z,1510157671.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:31.555Z,1510157671.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:31.934Z,1510157671.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:31.950Z,1510157671.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:32.342Z,1510157672.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:32.374Z,1510157672.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:32.745Z,1510157672.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:32.778Z,1510157672.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:33.145Z,1510157673.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:33.187Z,1510157673.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:33.533Z,1510157673.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:33.549Z,1510157673.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:33.935Z,1510157673.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:33.955Z,1510157673.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:34.334Z,1510157674.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:34.350Z,1510157674.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:34.742Z,1510157674.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:34.806Z,1510157674.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:35.146Z,1510157675.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:35.162Z,1510157675.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:35.546Z,1510157675.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:35.562Z,1510157675.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:35.937Z,1510157675.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:35.954Z,1510157675.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:36.335Z,1510157676.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:36.403Z,1510157676.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:36.739Z,1510157676.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:36.755Z,1510157676.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:37.137Z,1510157677.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:37.193Z,1510157677.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:37.547Z,1510157677.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:37.567Z,1510157677.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:37.951Z,1510157677.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:37.999Z,1510157677.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:38.347Z,1510157678.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:38.367Z,1510157678.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:38.737Z,1510157678.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:38.753Z,1510157678.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:39.138Z,1510157679.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:39.158Z,1510157679.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:39.527Z,1510157679.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:39.561Z,1510157679.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:39.938Z,1510157679.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:39.959Z,1510157679.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:40.338Z,1510157680.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:40.358Z,1510157680.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:40.742Z,1510157680.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:40.762Z,1510157680.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:41.150Z,1510157681.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:41.166Z,1510157681.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:41.551Z,1510157681.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:41.574Z,1510157681.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:41.927Z,1510157681.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:41.962Z,1510157681.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:42.335Z,1510157682.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:42.366Z,1510157682.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:42.739Z,1510157682.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:42.755Z,1510157682.755 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:42.755Z,1510157682.755 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57
2017-11-08T16:14:42.755Z,1510157682.755 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T16:14:42.757Z,1510157682.757 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:42.757Z,1510157682.757 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57
2017-11-08T16:14:42.757Z,1510157682.757 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T16:14:42.759Z,1510157682.759 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:42.759Z,1510157682.759 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 57
2017-11-08T16:14:42.759Z,1510157682.759 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T16:14:42.839Z,1510157682.839 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T16:14:42.839Z,1510157682.839 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T16:14:42.839Z,1510157682.839 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T16:14:43.127Z,1510157683.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:43.241Z,1510157683.241 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T16:14:43.241Z,1510157683.241 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57
2017-11-08T16:14:43.241Z,1510157683.241 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T16:14:43.241Z,1510157683.241 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57
2017-11-08T16:14:43.242Z,1510157683.242 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T16:14:43.242Z,1510157683.242 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 57
2017-11-08T16:14:43.542Z,1510157683.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:43.570Z,1510157683.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T16:14:43.571Z,1510157683.571 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:14:43.571Z,1510157683.571 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:14:43.571Z,1510157683.571 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T16:14:43.572Z,1510157683.572 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:14:43.572Z,1510157683.572 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:14:43.572Z,1510157683.572 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T16:14:43.573Z,1510157683.573 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:14:43.573Z,1510157683.573 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:14:43.953Z,1510157683.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:43.968Z,1510157683.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T16:14:43.969Z,1510157683.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:44.338Z,1510157684.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:44.362Z,1510157684.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T16:14:44.363Z,1510157684.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:44.731Z,1510157684.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:44.763Z,1510157684.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T16:14:44.764Z,1510157684.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:45.132Z,1510157685.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:45.148Z,1510157685.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T16:14:45.165Z,1510157685.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:45.531Z,1510157685.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:45.547Z,1510157685.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T16:14:45.548Z,1510157685.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:45.932Z,1510157685.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:45.975Z,1510157685.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T16:14:45.976Z,1510157685.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:46.336Z,1510157686.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:46.383Z,1510157686.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T16:14:46.384Z,1510157686.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:46.750Z,1510157686.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:46.775Z,1510157686.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T16:14:46.776Z,1510157686.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:47.149Z,1510157687.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:47.175Z,1510157687.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T16:14:47.176Z,1510157687.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:47.550Z,1510157687.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:47.575Z,1510157687.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T16:14:47.576Z,1510157687.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:47.936Z,1510157687.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:47.952Z,1510157687.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T16:14:47.953Z,1510157687.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:48.335Z,1510157688.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:48.351Z,1510157688.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T16:14:48.352Z,1510157688.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:48.736Z,1510157688.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:48.752Z,1510157688.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T16:14:48.753Z,1510157688.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:49.131Z,1510157689.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:49.151Z,1510157689.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T16:14:49.152Z,1510157689.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:49.550Z,1510157689.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:49.573Z,1510157689.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T16:14:49.574Z,1510157689.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:49.942Z,1510157689.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:49.957Z,1510157689.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T16:14:49.958Z,1510157689.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:50.342Z,1510157690.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:50.358Z,1510157690.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T16:14:50.359Z,1510157690.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:50.735Z,1510157690.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:50.751Z,1510157690.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T16:14:50.752Z,1510157690.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:51.135Z,1510157691.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:51.155Z,1510157691.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T16:14:51.156Z,1510157691.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:51.534Z,1510157691.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:51.550Z,1510157691.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T16:14:51.551Z,1510157691.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:51.938Z,1510157691.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:51.954Z,1510157691.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T16:14:51.955Z,1510157691.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:52.335Z,1510157692.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:52.351Z,1510157692.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T16:14:52.352Z,1510157692.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:52.742Z,1510157692.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:52.758Z,1510157692.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T16:14:52.759Z,1510157692.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:53.145Z,1510157693.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:53.181Z,1510157693.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T16:14:53.181Z,1510157693.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:53.550Z,1510157693.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:53.581Z,1510157693.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T16:14:53.582Z,1510157693.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:53.935Z,1510157693.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:53.955Z,1510157693.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T16:14:53.956Z,1510157693.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:54.336Z,1510157694.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:54.359Z,1510157694.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T16:14:54.360Z,1510157694.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:54.734Z,1510157694.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:54.751Z,1510157694.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T16:14:54.752Z,1510157694.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:55.136Z,1510157695.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:55.153Z,1510157695.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T16:14:55.154Z,1510157695.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:55.542Z,1510157695.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:55.563Z,1510157695.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T16:14:55.564Z,1510157695.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:55.946Z,1510157695.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:55.962Z,1510157695.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T16:14:55.963Z,1510157695.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:56.342Z,1510157696.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:56.358Z,1510157696.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T16:14:56.359Z,1510157696.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:56.739Z,1510157696.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:56.755Z,1510157696.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T16:14:56.756Z,1510157696.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:57.135Z,1510157697.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:57.206Z,1510157697.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T16:14:57.207Z,1510157697.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:57.535Z,1510157697.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:57.551Z,1510157697.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T16:14:57.552Z,1510157697.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:57.935Z,1510157697.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:57.965Z,1510157697.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T16:14:57.966Z,1510157697.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:58.328Z,1510157698.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:58.377Z,1510157698.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T16:14:58.378Z,1510157698.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:58.747Z,1510157698.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:58.768Z,1510157698.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T16:14:58.769Z,1510157698.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:59.153Z,1510157699.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:59.169Z,1510157699.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T16:14:59.170Z,1510157699.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:59.549Z,1510157699.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:59.596Z,1510157699.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T16:14:59.597Z,1510157699.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:14:59.933Z,1510157699.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:14:59.948Z,1510157699.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T16:14:59.949Z,1510157699.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:00.334Z,1510157700.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:00.395Z,1510157700.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T16:15:00.396Z,1510157700.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:00.734Z,1510157700.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:00.750Z,1510157700.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T16:15:00.751Z,1510157700.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:01.132Z,1510157701.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:01.148Z,1510157701.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T16:15:01.149Z,1510157701.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:01.546Z,1510157701.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:01.562Z,1510157701.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T16:15:01.563Z,1510157701.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:01.946Z,1510157701.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:01.961Z,1510157701.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T16:15:01.962Z,1510157701.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:02.342Z,1510157702.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:02.358Z,1510157702.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T16:15:02.359Z,1510157702.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:02.737Z,1510157702.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:02.753Z,1510157702.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-08T16:15:02.754Z,1510157702.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:03.134Z,1510157703.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:03.150Z,1510157703.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:03.534Z,1510157703.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:03.550Z,1510157703.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:03.936Z,1510157703.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:03.953Z,1510157703.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:04.334Z,1510157704.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:04.350Z,1510157704.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:04.742Z,1510157704.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:04.758Z,1510157704.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:05.146Z,1510157705.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:05.162Z,1510157705.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:05.543Z,1510157705.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:05.558Z,1510157705.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:05.931Z,1510157705.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:05.952Z,1510157705.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:06.337Z,1510157706.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:06.353Z,1510157706.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:06.735Z,1510157706.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:06.750Z,1510157706.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:07.131Z,1510157707.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:07.152Z,1510157707.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:07.542Z,1510157707.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:07.563Z,1510157707.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:07.943Z,1510157707.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:07.963Z,1510157707.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:08.342Z,1510157708.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:08.360Z,1510157708.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:08.737Z,1510157708.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:08.795Z,1510157708.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:09.134Z,1510157709.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:09.150Z,1510157709.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:09.537Z,1510157709.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:09.554Z,1510157709.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:09.930Z,1510157709.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:09.958Z,1510157709.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:10.334Z,1510157710.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:10.355Z,1510157710.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:10.747Z,1510157710.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:10.767Z,1510157710.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:11.146Z,1510157711.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:11.167Z,1510157711.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:11.546Z,1510157711.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:11.562Z,1510157711.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:11.937Z,1510157711.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:11.953Z,1510157711.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:12.335Z,1510157712.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:12.356Z,1510157712.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:12.735Z,1510157712.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:12.751Z,1510157712.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:13.130Z,1510157713.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:13.161Z,1510157713.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:13.546Z,1510157713.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:13.562Z,1510157713.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:13.946Z,1510157713.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:13.967Z,1510157713.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:14.346Z,1510157714.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:14.367Z,1510157714.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:14.735Z,1510157714.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:14.755Z,1510157714.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:15.134Z,1510157715.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:15.155Z,1510157715.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:15.537Z,1510157715.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:15.553Z,1510157715.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:15.937Z,1510157715.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:15.953Z,1510157715.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:16.334Z,1510157716.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:16.355Z,1510157716.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:16.746Z,1510157716.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:16.763Z,1510157716.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:17.146Z,1510157717.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:17.162Z,1510157717.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:17.547Z,1510157717.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:17.563Z,1510157717.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:17.939Z,1510157717.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:17.955Z,1510157717.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:18.335Z,1510157718.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:18.356Z,1510157718.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:18.735Z,1510157718.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:18.755Z,1510157718.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:19.138Z,1510157719.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:19.154Z,1510157719.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:19.546Z,1510157719.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:19.618Z,1510157719.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:19.948Z,1510157719.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:19.971Z,1510157719.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:20.350Z,1510157720.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:20.372Z,1510157720.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:20.740Z,1510157720.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:20.800Z,1510157720.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:21.131Z,1510157721.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:21.157Z,1510157721.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:24.219Z,1510157724.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:24.272Z,1510157724.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:24.353Z,1510157724.353 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:15:24.353Z,1510157724.353 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T16:15:24.402Z,1510157724.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:24.445Z,1510157724.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:24.617Z,1510157724.617 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:15:24.617Z,1510157724.617 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:15:24.617Z,1510157724.617 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:15:24.617Z,1510157724.617 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T16:15:24.617Z,1510157724.617 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:15:24.803Z,1510157724.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:24.855Z,1510157724.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:24.953Z,1510157724.953 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:15:25.021Z,1510157725.021 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:15:25.111Z,1510157725.111 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:15:25.207Z,1510157725.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:25.226Z,1510157725.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:25.600Z,1510157725.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:25.617Z,1510157725.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:25.979Z,1510157725.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:26.008Z,1510157726.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:26.383Z,1510157726.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:26.416Z,1510157726.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:26.493Z,1510157726.493 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:15:26.493Z,1510157726.493 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T16:15:26.725Z,1510157726.725 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:15:26.725Z,1510157726.725 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:15:26.725Z,1510157726.725 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:15:26.725Z,1510157726.725 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T16:15:26.726Z,1510157726.726 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:15:26.780Z,1510157726.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:26.812Z,1510157726.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:26.901Z,1510157726.901 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:15:27.129Z,1510157727.129 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:15:27.186Z,1510157727.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:27.270Z,1510157727.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:27.322Z,1510157727.322 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:15:27.603Z,1510157727.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:27.624Z,1510157727.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:28.003Z,1510157728.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:28.020Z,1510157728.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:28.401Z,1510157728.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:28.417Z,1510157728.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:28.783Z,1510157728.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:28.816Z,1510157728.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:28.913Z,1510157728.913 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:15:28.913Z,1510157728.913 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T16:15:28.937Z,1510157728.937 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:15:28.937Z,1510157728.937 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:15:28.937Z,1510157728.937 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:15:28.937Z,1510157728.937 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T16:15:28.938Z,1510157728.938 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:15:29.179Z,1510157729.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:29.216Z,1510157729.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:29.304Z,1510157729.304 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:15:29.341Z,1510157729.341 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:15:29.435Z,1510157729.435 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:15:29.585Z,1510157729.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:29.623Z,1510157729.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:29.983Z,1510157729.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:30.019Z,1510157730.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:30.394Z,1510157730.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:30.427Z,1510157730.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:30.801Z,1510157730.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:30.826Z,1510157730.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:30.916Z,1510157730.916 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:15:30.917Z,1510157730.917 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T16:15:31.049Z,1510157731.049 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:15:31.050Z,1510157731.050 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:15:31.050Z,1510157731.050 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:15:31.050Z,1510157731.050 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T16:15:31.050Z,1510157731.050 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:15:31.198Z,1510157731.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:31.222Z,1510157731.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:31.301Z,1510157731.301 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:15:31.453Z,1510157731.453 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:15:31.541Z,1510157731.541 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:15:31.593Z,1510157731.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:31.626Z,1510157731.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:31.984Z,1510157731.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:31.000Z,1510157732.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:32.398Z,1510157732.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:32.422Z,1510157732.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:32.798Z,1510157732.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:32.822Z,1510157732.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:32.901Z,1510157732.901 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:15:32.901Z,1510157732.901 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T16:15:33.165Z,1510157733.165 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:15:33.166Z,1510157733.166 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:15:33.166Z,1510157733.166 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:15:33.166Z,1510157733.166 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T16:15:33.166Z,1510157733.166 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:15:33.197Z,1510157733.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:33.266Z,1510157733.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:33.345Z,1510157733.345 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:15:33.345Z,1510157733.345 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:15:33.569Z,1510157733.569 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:15:33.624Z,1510157733.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:33.651Z,1510157733.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:33.773Z,1510157733.773 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:15:33.987Z,1510157733.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:34.008Z,1510157734.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:34.401Z,1510157734.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:34.434Z,1510157734.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:34.798Z,1510157734.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:34.815Z,1510157734.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:35.198Z,1510157735.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:35.215Z,1510157735.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:35.591Z,1510157735.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:35.608Z,1510157735.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:35.990Z,1510157735.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:36.007Z,1510157736.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:36.395Z,1510157736.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:36.416Z,1510157736.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:36.801Z,1510157736.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:36.817Z,1510157736.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:37.195Z,1510157737.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:37.212Z,1510157737.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:37.591Z,1510157737.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:37.608Z,1510157737.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:37.986Z,1510157737.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:38.015Z,1510157738.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:38.395Z,1510157738.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:38.415Z,1510157738.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:38.798Z,1510157738.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:38.815Z,1510157738.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:39.198Z,1510157739.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:39.215Z,1510157739.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:39.595Z,1510157739.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:39.612Z,1510157739.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:39.993Z,1510157739.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:40.010Z,1510157740.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:40.396Z,1510157740.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:40.413Z,1510157740.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:40.799Z,1510157740.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:40.817Z,1510157740.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:41.199Z,1510157741.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:41.287Z,1510157741.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:41.591Z,1510157741.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:41.609Z,1510157741.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:41.986Z,1510157741.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:42.003Z,1510157742.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:42.398Z,1510157742.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:42.415Z,1510157742.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:42.799Z,1510157742.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:42.820Z,1510157742.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:43.199Z,1510157743.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:43.224Z,1510157743.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:43.590Z,1510157743.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:43.607Z,1510157743.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:43.990Z,1510157743.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:44.025Z,1510157744.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:44.399Z,1510157744.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:44.417Z,1510157744.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:44.802Z,1510157744.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:44.819Z,1510157744.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:45.200Z,1510157745.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:45.217Z,1510157745.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:45.580Z,1510157745.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:45.614Z,1510157745.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:45.987Z,1510157745.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:46.062Z,1510157746.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:46.404Z,1510157746.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:46.420Z,1510157746.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:46.803Z,1510157746.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:46.820Z,1510157746.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:47.199Z,1510157747.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:47.254Z,1510157747.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:47.584Z,1510157747.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:47.632Z,1510157747.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:47.983Z,1510157747.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:48.016Z,1510157748.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:48.399Z,1510157748.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:48.459Z,1510157748.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:48.804Z,1510157748.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:48.827Z,1510157748.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:49.198Z,1510157749.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:49.218Z,1510157749.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:49.583Z,1510157749.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:49.614Z,1510157749.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:49.979Z,1510157749.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:50.004Z,1510157750.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:50.393Z,1510157750.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:50.419Z,1510157750.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:50.803Z,1510157750.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:50.819Z,1510157750.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:51.204Z,1510157751.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:51.220Z,1510157751.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:51.584Z,1510157751.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:51.609Z,1510157751.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:51.983Z,1510157751.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:52.012Z,1510157752.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:52.401Z,1510157752.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:52.417Z,1510157752.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:52.800Z,1510157752.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:52.816Z,1510157752.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:53.200Z,1510157753.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:53.223Z,1510157753.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:53.580Z,1510157753.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:53.615Z,1510157753.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:53.979Z,1510157753.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:54.013Z,1510157754.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:54.400Z,1510157754.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:54.416Z,1510157754.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:54.803Z,1510157754.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:54.819Z,1510157754.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:55.190Z,1510157755.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:55.216Z,1510157755.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:55.584Z,1510157755.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:55.618Z,1510157755.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:55.983Z,1510157755.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:56.014Z,1510157756.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:56.390Z,1510157756.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:56.422Z,1510157756.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:56.802Z,1510157756.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:56.864Z,1510157756.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:57.201Z,1510157757.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:57.217Z,1510157757.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:57.584Z,1510157757.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:57.614Z,1510157757.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:57.983Z,1510157757.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:58.013Z,1510157758.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:58.404Z,1510157758.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:58.420Z,1510157758.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:58.800Z,1510157758.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:58.817Z,1510157758.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:59.200Z,1510157759.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:59.224Z,1510157759.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:59.580Z,1510157759.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:15:59.616Z,1510157759.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:15:59.983Z,1510157759.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:00.013Z,1510157760.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:00.400Z,1510157760.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:00.416Z,1510157760.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:00.804Z,1510157760.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:00.820Z,1510157760.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:01.200Z,1510157761.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:01.217Z,1510157761.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:01.584Z,1510157761.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:01.614Z,1510157761.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:01.983Z,1510157761.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:02.014Z,1510157762.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:02.390Z,1510157762.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:02.421Z,1510157762.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:02.803Z,1510157762.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:02.820Z,1510157762.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:03.204Z,1510157763.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:03.220Z,1510157763.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:03.580Z,1510157763.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:03.613Z,1510157763.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:03.983Z,1510157763.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:04.017Z,1510157764.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:04.405Z,1510157764.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:04.421Z,1510157764.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:04.794Z,1510157764.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:04.827Z,1510157764.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:05.194Z,1510157765.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:05.226Z,1510157765.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:05.584Z,1510157765.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:05.616Z,1510157765.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:05.983Z,1510157765.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:06.020Z,1510157766.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:06.394Z,1510157766.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:06.424Z,1510157766.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:06.801Z,1510157766.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:06.825Z,1510157766.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:07.198Z,1510157767.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:07.222Z,1510157767.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:07.586Z,1510157767.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:07.603Z,1510157767.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:07.987Z,1510157767.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:08.049Z,1510157768.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:08.394Z,1510157768.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:08.426Z,1510157768.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:08.797Z,1510157768.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:08.830Z,1510157768.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:09.197Z,1510157769.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:09.213Z,1510157769.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:09.587Z,1510157769.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:09.607Z,1510157769.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:09.986Z,1510157769.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:10.003Z,1510157770.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:10.397Z,1510157770.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:10.413Z,1510157770.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:10.794Z,1510157770.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:10.810Z,1510157770.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:11.198Z,1510157771.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:11.214Z,1510157771.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:11.590Z,1510157771.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:11.606Z,1510157771.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:11.989Z,1510157771.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:11.998Z,1510157771.998 [BPC1](ERROR): Failed to receive battery data
2017-11-08T16:16:11.998Z,1510157771.998 [BPC1] Communications Fault, FailCount= 1
2017-11-08T16:16:11.998Z,1510157771.998 [BPC1](ERROR): Communications Fault
2017-11-08T16:16:12.007Z,1510157772.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:12.109Z,1510157772.109 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T16:16:12.394Z,1510157772.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:12.411Z,1510157772.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:12.797Z,1510157772.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:12.813Z,1510157772.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:13.192Z,1510157773.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:13.208Z,1510157773.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:13.285Z,1510157773.285 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T16:16:13.285Z,1510157773.285 [BPC1] No Fault, FailCount= 1
2017-11-08T16:16:13.589Z,1510157773.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:13.659Z,1510157773.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:13.989Z,1510157773.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:14.005Z,1510157774.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:14.394Z,1510157774.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:14.410Z,1510157774.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:14.797Z,1510157774.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:14.814Z,1510157774.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:15.202Z,1510157775.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:15.217Z,1510157775.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:15.585Z,1510157775.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:15.617Z,1510157775.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:15.987Z,1510157775.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:16.017Z,1510157776.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:16.396Z,1510157776.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:16.412Z,1510157776.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:16.794Z,1510157776.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:16.818Z,1510157776.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:17.201Z,1510157777.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:17.217Z,1510157777.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:17.588Z,1510157777.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:17.612Z,1510157777.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:17.995Z,1510157777.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:18.011Z,1510157778.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:18.400Z,1510157778.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:18.420Z,1510157778.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:18.800Z,1510157778.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:18.816Z,1510157778.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:19.194Z,1510157779.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:19.235Z,1510157779.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:19.587Z,1510157779.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:19.611Z,1510157779.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:19.991Z,1510157779.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:20.007Z,1510157780.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:20.398Z,1510157780.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:20.421Z,1510157780.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:20.802Z,1510157780.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:20.824Z,1510157780.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:21.199Z,1510157781.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:21.217Z,1510157781.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:24.273Z,1510157784.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:24.327Z,1510157784.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:24.470Z,1510157784.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:24.495Z,1510157784.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:24.885Z,1510157784.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:24.901Z,1510157784.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:25.275Z,1510157785.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:25.308Z,1510157785.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:25.673Z,1510157785.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:25.704Z,1510157785.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:26.059Z,1510157786.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:26.076Z,1510157786.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:26.462Z,1510157786.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:26.480Z,1510157786.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:26.866Z,1510157786.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:26.883Z,1510157786.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:27.260Z,1510157787.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:27.279Z,1510157787.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:27.671Z,1510157787.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:27.707Z,1510157787.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:28.074Z,1510157788.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:28.104Z,1510157788.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:28.474Z,1510157788.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:28.511Z,1510157788.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:28.862Z,1510157788.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:28.881Z,1510157788.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:29.264Z,1510157789.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:29.281Z,1510157789.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:29.665Z,1510157789.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:29.727Z,1510157789.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:30.065Z,1510157790.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:30.082Z,1510157790.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:30.474Z,1510157790.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:30.491Z,1510157790.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:30.874Z,1510157790.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:30.900Z,1510157790.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:31.276Z,1510157791.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:31.292Z,1510157791.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:31.659Z,1510157791.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:31.685Z,1510157791.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:32.056Z,1510157792.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:32.085Z,1510157792.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:32.457Z,1510157792.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:32.487Z,1510157792.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:32.854Z,1510157792.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:32.880Z,1510157792.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:33.259Z,1510157793.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:33.284Z,1510157793.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:33.674Z,1510157793.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:33.695Z,1510157793.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:34.074Z,1510157794.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:34.095Z,1510157794.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:34.475Z,1510157794.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:34.492Z,1510157794.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:34.859Z,1510157794.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:34.939Z,1510157794.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:35.255Z,1510157795.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:35.284Z,1510157795.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:35.654Z,1510157795.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:35.680Z,1510157795.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:36.058Z,1510157796.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:36.087Z,1510157796.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:36.476Z,1510157796.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:36.535Z,1510157796.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:36.878Z,1510157796.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:36.903Z,1510157796.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:37.267Z,1510157797.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:37.326Z,1510157797.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:37.658Z,1510157797.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:37.691Z,1510157797.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:38.055Z,1510157798.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:38.081Z,1510157798.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:38.451Z,1510157798.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:38.481Z,1510157798.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:38.868Z,1510157798.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:38.875Z,1510157798.875 [PNI_TCM](ERROR): CRC does not match. Expected:0x16164 got:0x49168
2017-11-08T16:16:38.903Z,1510157798.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:39.258Z,1510157799.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:39.283Z,1510157799.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:39.672Z,1510157799.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:39.688Z,1510157799.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:40.074Z,1510157800.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:40.090Z,1510157800.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:40.474Z,1510157800.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:40.489Z,1510157800.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:40.854Z,1510157800.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:40.879Z,1510157800.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:41.259Z,1510157801.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:41.285Z,1510157801.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:41.657Z,1510157801.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:41.686Z,1510157801.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:42.053Z,1510157802.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:42.080Z,1510157802.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:42.476Z,1510157802.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:42.499Z,1510157802.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:42.880Z,1510157802.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:42.896Z,1510157802.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:43.266Z,1510157803.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:43.290Z,1510157803.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:43.657Z,1510157803.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:43.690Z,1510157803.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:44.058Z,1510157804.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:44.087Z,1510157804.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:44.454Z,1510157804.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:44.480Z,1510157804.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:44.857Z,1510157804.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:44.885Z,1510157804.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:45.257Z,1510157805.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:45.282Z,1510157805.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:45.666Z,1510157805.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:45.722Z,1510157805.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:46.079Z,1510157806.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:46.095Z,1510157806.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:46.479Z,1510157806.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:46.499Z,1510157806.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:46.857Z,1510157806.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:46.887Z,1510157806.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:47.258Z,1510157807.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:47.295Z,1510157807.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:47.657Z,1510157807.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:47.682Z,1510157807.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:48.051Z,1510157808.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:48.081Z,1510157808.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:48.473Z,1510157808.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:48.480Z,1510157808.480 [PNI_TCM](ERROR): CRC does not match. Expected:0x45783 got:0x49167
2017-11-08T16:16:48.507Z,1510157808.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:48.876Z,1510157808.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:48.893Z,1510157808.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:49.272Z,1510157809.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:49.288Z,1510157809.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:49.651Z,1510157809.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:49.681Z,1510157809.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:50.058Z,1510157810.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:50.074Z,1510157810.074 [PNI_TCM](ERROR): CRC does not match. Expected:0x4028 got:0x49167
2017-11-08T16:16:50.103Z,1510157810.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:50.454Z,1510157810.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:50.480Z,1510157810.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:50.860Z,1510157810.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:50.885Z,1510157810.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:51.256Z,1510157811.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:51.285Z,1510157811.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:51.667Z,1510157811.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:51.689Z,1510157811.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:52.075Z,1510157812.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:52.092Z,1510157812.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:52.480Z,1510157812.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:52.496Z,1510157812.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:52.855Z,1510157812.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:52.885Z,1510157812.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:53.256Z,1510157813.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:53.282Z,1510157813.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:53.660Z,1510157813.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:53.686Z,1510157813.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:54.055Z,1510157814.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:54.081Z,1510157814.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:54.474Z,1510157814.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:54.491Z,1510157814.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:54.877Z,1510157814.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:54.893Z,1510157814.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:55.274Z,1510157815.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:55.290Z,1510157815.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:55.665Z,1510157815.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:55.682Z,1510157815.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:56.063Z,1510157816.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:56.137Z,1510157816.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:56.464Z,1510157816.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:56.487Z,1510157816.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:56.865Z,1510157816.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:56.882Z,1510157816.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:57.262Z,1510157817.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:57.282Z,1510157817.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:57.674Z,1510157817.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:57.742Z,1510157817.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:58.074Z,1510157818.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:58.099Z,1510157818.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:58.476Z,1510157818.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:58.527Z,1510157818.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:58.865Z,1510157818.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:58.882Z,1510157818.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:59.255Z,1510157819.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:59.313Z,1510157819.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:16:59.665Z,1510157819.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:16:59.685Z,1510157819.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:00.064Z,1510157820.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:00.080Z,1510157820.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:00.480Z,1510157820.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:00.503Z,1510157820.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:00.875Z,1510157820.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:00.908Z,1510157820.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:01.271Z,1510157821.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:01.301Z,1510157821.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:01.658Z,1510157821.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:01.691Z,1510157821.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:02.060Z,1510157822.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:02.087Z,1510157822.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:02.458Z,1510157822.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:02.487Z,1510157822.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:02.871Z,1510157822.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:02.892Z,1510157822.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:03.256Z,1510157823.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:03.290Z,1510157823.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:03.676Z,1510157823.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:03.692Z,1510157823.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:04.075Z,1510157824.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:04.108Z,1510157824.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:04.480Z,1510157824.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:04.496Z,1510157824.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:04.854Z,1510157824.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:04.890Z,1510157824.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:05.260Z,1510157825.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:05.288Z,1510157825.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:05.652Z,1510157825.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:05.687Z,1510157825.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:06.053Z,1510157826.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:06.070Z,1510157826.070 [PNI_TCM](ERROR): CRC does not match. Expected:0x15082 got:0x16245
2017-11-08T16:17:06.095Z,1510157826.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:06.475Z,1510157826.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:06.494Z,1510157826.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:06.875Z,1510157826.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:06.894Z,1510157826.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:07.274Z,1510157827.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:07.292Z,1510157827.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:07.657Z,1510157827.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:07.711Z,1510157827.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:08.058Z,1510157828.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:08.086Z,1510157828.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:08.455Z,1510157828.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:08.487Z,1510157828.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:08.857Z,1510157828.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:08.891Z,1510157828.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:09.253Z,1510157829.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:09.287Z,1510157829.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:09.675Z,1510157829.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:09.692Z,1510157829.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:10.078Z,1510157830.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:10.098Z,1510157830.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:10.474Z,1510157830.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:10.490Z,1510157830.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:10.857Z,1510157830.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:10.884Z,1510157830.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:11.272Z,1510157831.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:11.383Z,1510157831.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:11.660Z,1510157831.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:11.685Z,1510157831.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:12.051Z,1510157832.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:12.087Z,1510157832.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:12.473Z,1510157832.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:12.480Z,1510157832.480 [PNI_TCM](ERROR): CRC does not match. Expected:0x36809 got:0x4124
2017-11-08T16:17:12.507Z,1510157832.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:12.873Z,1510157832.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:12.895Z,1510157832.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:13.276Z,1510157833.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:13.292Z,1510157833.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:13.651Z,1510157833.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:13.691Z,1510157833.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:14.053Z,1510157834.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:14.061Z,1510157834.061 [PNI_TCM](ERROR): CRC does not match. Expected:0x51823 got:0x49167
2017-11-08T16:17:14.086Z,1510157834.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:14.454Z,1510157834.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:14.486Z,1510157834.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:14.860Z,1510157834.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:14.890Z,1510157834.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:15.251Z,1510157835.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:15.291Z,1510157835.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:15.674Z,1510157835.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:15.686Z,1510157835.686 [PNI_TCM](ERROR): CRC does not match. Expected:0x511 got:0x5932
2017-11-08T16:17:15.711Z,1510157835.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:16.080Z,1510157836.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:16.096Z,1510157836.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:16.477Z,1510157836.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:16.493Z,1510157836.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:16.852Z,1510157836.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:16.891Z,1510157836.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:17.257Z,1510157837.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:17.264Z,1510157837.264 [PNI_TCM](ERROR): CRC does not match. Expected:0x32558 got:0x16244
2017-11-08T16:17:17.300Z,1510157837.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:17.654Z,1510157837.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:17.690Z,1510157837.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:18.055Z,1510157838.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:18.088Z,1510157838.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:18.467Z,1510157838.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:18.519Z,1510157838.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:18.870Z,1510157838.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:18.896Z,1510157838.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:19.266Z,1510157839.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:19.291Z,1510157839.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:19.659Z,1510157839.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:19.723Z,1510157839.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:20.051Z,1510157840.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:20.094Z,1510157840.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:20.457Z,1510157840.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:20.464Z,1510157840.464 [PNI_TCM](ERROR): CRC does not match. Expected:0x57021 got:0x4023
2017-11-08T16:17:20.497Z,1510157840.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:20.862Z,1510157840.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:20.911Z,1510157840.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:20.915Z,1510157840.915 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T16:17:20.915Z,1510157840.915 [Default:CheckIn:C.Wait] Stopped
2017-11-08T16:17:20.915Z,1510157840.915 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T16:17:20.915Z,1510157840.915 [Default:CheckIn:D] Running Loop=1
2017-11-08T16:17:21.259Z,1510157841.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:21.295Z,1510157841.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:21.298Z,1510157841.298 [Default:CheckIn:D] Stopped
2017-11-08T16:17:21.298Z,1510157841.298 [Default:CheckIn:E] Running Loop=1
2017-11-08T16:17:21.675Z,1510157841.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:21.738Z,1510157841.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:21.742Z,1510157841.742 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 170.671973 min 
2017-11-08T16:17:21.742Z,1510157841.742 [Default:CheckIn:E] Stopped
2017-11-08T16:17:21.742Z,1510157841.742 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T16:17:21.742Z,1510157841.742 [Default:CheckIn] Stopped
2017-11-08T16:17:21.742Z,1510157841.742 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T16:17:21.743Z,1510157841.743 [Default:CheckIn](INFO): Running loop #5
2017-11-08T16:17:21.743Z,1510157841.743 [Default:CheckIn] Running Loop=5
2017-11-08T16:17:21.743Z,1510157841.743 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T16:17:21.743Z,1510157841.743 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T16:17:24.761Z,1510157844.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:24.778Z,1510157844.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:24.937Z,1510157844.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:24.953Z,1510157844.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:25.315Z,1510157845.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:25.350Z,1510157845.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:25.716Z,1510157845.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:25.753Z,1510157845.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:26.115Z,1510157846.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:26.150Z,1510157846.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:26.526Z,1510157846.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:26.559Z,1510157846.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:26.925Z,1510157846.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:26.950Z,1510157846.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:27.326Z,1510157847.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:27.352Z,1510157847.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:27.715Z,1510157847.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:27.750Z,1510157847.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:28.115Z,1510157848.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:28.153Z,1510157848.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:28.511Z,1510157848.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:28.548Z,1510157848.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:28.916Z,1510157848.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:28.932Z,1510157848.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:29.315Z,1510157849.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:29.331Z,1510157849.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:29.722Z,1510157849.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:29.772Z,1510157849.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:30.130Z,1510157850.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:30.155Z,1510157850.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:30.529Z,1510157850.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:30.557Z,1510157850.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:30.911Z,1510157850.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:30.932Z,1510157850.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:31.315Z,1510157851.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:31.335Z,1510157851.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:31.720Z,1510157851.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:31.735Z,1510157851.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:32.119Z,1510157852.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:32.140Z,1510157852.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:32.530Z,1510157852.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:32.562Z,1510157852.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:32.929Z,1510157852.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:32.945Z,1510157852.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:33.330Z,1510157853.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:33.346Z,1510157853.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:33.718Z,1510157853.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:33.735Z,1510157853.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:34.118Z,1510157854.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:34.134Z,1510157854.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:34.517Z,1510157854.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:34.533Z,1510157854.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:34.919Z,1510157854.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:34.939Z,1510157854.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:35.318Z,1510157855.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:35.333Z,1510157855.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:35.722Z,1510157855.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:35.738Z,1510157855.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:36.129Z,1510157856.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:36.146Z,1510157856.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:36.529Z,1510157856.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:36.572Z,1510157856.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:36.918Z,1510157856.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:36.935Z,1510157856.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:37.318Z,1510157857.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:37.334Z,1510157857.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:37.719Z,1510157857.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:37.739Z,1510157857.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:38.116Z,1510157858.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:38.132Z,1510157858.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:38.530Z,1510157858.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:38.546Z,1510157858.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:38.929Z,1510157858.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:38.945Z,1510157858.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:39.330Z,1510157859.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:39.346Z,1510157859.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:39.718Z,1510157859.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:39.735Z,1510157859.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:40.118Z,1510157860.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:40.134Z,1510157860.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:40.516Z,1510157860.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:40.583Z,1510157860.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:40.921Z,1510157860.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:40.937Z,1510157860.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:41.315Z,1510157861.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:41.341Z,1510157861.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:41.726Z,1510157861.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:41.791Z,1510157861.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:42.130Z,1510157862.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:42.146Z,1510157862.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:42.529Z,1510157862.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:42.578Z,1510157862.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:42.922Z,1510157862.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:42.938Z,1510157862.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:43.321Z,1510157863.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:43.375Z,1510157863.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:43.722Z,1510157863.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:43.738Z,1510157863.738 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:43.738Z,1510157863.738 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58
2017-11-08T16:17:43.738Z,1510157863.738 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T16:17:43.740Z,1510157863.740 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:43.740Z,1510157863.740 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58
2017-11-08T16:17:43.740Z,1510157863.740 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T16:17:43.742Z,1510157863.742 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:43.742Z,1510157863.742 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 58
2017-11-08T16:17:43.742Z,1510157863.742 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T16:17:43.821Z,1510157863.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T16:17:43.821Z,1510157863.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T16:17:43.821Z,1510157863.821 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T16:17:44.118Z,1510157864.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:44.221Z,1510157864.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T16:17:44.221Z,1510157864.221 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58
2017-11-08T16:17:44.221Z,1510157864.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T16:17:44.222Z,1510157864.222 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58
2017-11-08T16:17:44.222Z,1510157864.222 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T16:17:44.222Z,1510157864.222 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 58
2017-11-08T16:17:44.528Z,1510157864.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:44.550Z,1510157864.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T16:17:44.551Z,1510157864.551 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:17:44.551Z,1510157864.551 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:17:44.552Z,1510157864.552 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T16:17:44.552Z,1510157864.552 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:17:44.552Z,1510157864.552 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:17:44.553Z,1510157864.553 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T16:17:44.553Z,1510157864.553 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:17:44.554Z,1510157864.554 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:17:44.937Z,1510157864.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:44.952Z,1510157864.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T16:17:44.953Z,1510157864.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:45.337Z,1510157865.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:45.353Z,1510157865.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T16:17:45.354Z,1510157865.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:45.716Z,1510157865.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:45.747Z,1510157865.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T16:17:45.748Z,1510157865.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:46.115Z,1510157866.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:46.141Z,1510157866.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T16:17:46.142Z,1510157866.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:46.512Z,1510157866.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:46.547Z,1510157866.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T16:17:46.548Z,1510157866.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:46.928Z,1510157866.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:46.944Z,1510157866.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T16:17:46.945Z,1510157866.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:47.316Z,1510157867.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:47.342Z,1510157867.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T16:17:47.343Z,1510157867.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:47.729Z,1510157867.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:47.753Z,1510157867.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T16:17:47.754Z,1510157867.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:48.137Z,1510157868.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:48.153Z,1510157868.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T16:17:48.154Z,1510157868.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:48.534Z,1510157868.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:48.549Z,1510157868.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T16:17:48.550Z,1510157868.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:48.925Z,1510157868.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:48.947Z,1510157868.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T16:17:48.948Z,1510157868.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:49.316Z,1510157869.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:49.351Z,1510157869.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T16:17:49.352Z,1510157869.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:49.712Z,1510157869.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:49.744Z,1510157869.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T16:17:49.745Z,1510157869.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:50.111Z,1510157870.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:50.139Z,1510157870.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T16:17:50.140Z,1510157870.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:50.531Z,1510157870.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:50.559Z,1510157870.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T16:17:50.560Z,1510157870.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:50.934Z,1510157870.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:50.950Z,1510157870.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T16:17:50.951Z,1510157870.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:51.332Z,1510157871.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:51.356Z,1510157871.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T16:17:51.357Z,1510157871.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:51.715Z,1510157871.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:51.764Z,1510157871.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T16:17:51.765Z,1510157871.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:52.111Z,1510157872.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:52.143Z,1510157872.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T16:17:52.144Z,1510157872.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:52.515Z,1510157872.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:52.550Z,1510157872.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T16:17:52.551Z,1510157872.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:52.916Z,1510157872.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:52.947Z,1510157872.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T16:17:52.948Z,1510157872.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:53.315Z,1510157873.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:53.330Z,1510157873.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T16:17:53.331Z,1510157873.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:53.726Z,1510157873.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:53.758Z,1510157873.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T16:17:53.759Z,1510157873.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:54.129Z,1510157874.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:54.155Z,1510157874.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T16:17:54.156Z,1510157874.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:54.529Z,1510157874.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:54.556Z,1510157874.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T16:17:54.557Z,1510157874.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:54.915Z,1510157874.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:54.935Z,1510157874.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T16:17:54.936Z,1510157874.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:55.319Z,1510157875.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:55.339Z,1510157875.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T16:17:55.340Z,1510157875.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:55.720Z,1510157875.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:55.735Z,1510157875.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T16:17:55.736Z,1510157875.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:56.118Z,1510157876.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:56.134Z,1510157876.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T16:17:56.135Z,1510157876.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:56.530Z,1510157876.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:56.566Z,1510157876.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T16:17:56.566Z,1510157876.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:56.929Z,1510157876.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:56.945Z,1510157876.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T16:17:56.945Z,1510157876.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:57.330Z,1510157877.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:57.345Z,1510157877.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T16:17:57.346Z,1510157877.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:57.720Z,1510157877.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:57.736Z,1510157877.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T16:17:57.737Z,1510157877.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:58.115Z,1510157878.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:58.141Z,1510157878.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T16:17:58.142Z,1510157878.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:58.517Z,1510157878.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:58.533Z,1510157878.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T16:17:58.534Z,1510157878.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:58.921Z,1510157878.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:58.937Z,1510157878.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T16:17:58.938Z,1510157878.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:59.318Z,1510157879.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:59.339Z,1510157879.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T16:17:59.340Z,1510157879.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:17:59.730Z,1510157879.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:17:59.746Z,1510157879.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T16:17:59.747Z,1510157879.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:00.130Z,1510157880.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:00.146Z,1510157880.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T16:18:00.147Z,1510157880.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:00.526Z,1510157880.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:00.547Z,1510157880.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T16:18:00.548Z,1510157880.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:00.919Z,1510157880.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:00.935Z,1510157880.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T16:18:00.936Z,1510157880.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:01.319Z,1510157881.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:01.339Z,1510157881.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T16:18:01.340Z,1510157881.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:01.718Z,1510157881.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:01.735Z,1510157881.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T16:18:01.736Z,1510157881.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:02.115Z,1510157882.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:02.186Z,1510157882.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T16:18:02.187Z,1510157882.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:02.526Z,1510157882.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:02.542Z,1510157882.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T16:18:02.543Z,1510157882.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:02.925Z,1510157882.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:02.947Z,1510157882.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T16:18:02.948Z,1510157882.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:03.326Z,1510157883.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:03.342Z,1510157883.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T16:18:03.343Z,1510157883.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:03.720Z,1510157883.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:03.783Z,1510157883.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:04.122Z,1510157884.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:04.138Z,1510157884.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:04.521Z,1510157884.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:04.538Z,1510157884.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:04.922Z,1510157884.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:04.982Z,1510157884.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:05.322Z,1510157885.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:05.338Z,1510157885.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:05.726Z,1510157885.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:05.785Z,1510157885.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:06.130Z,1510157886.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:06.146Z,1510157886.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:06.527Z,1510157886.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:06.547Z,1510157886.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:06.921Z,1510157886.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:06.943Z,1510157886.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:07.320Z,1510157887.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:07.337Z,1510157887.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:07.722Z,1510157887.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:07.738Z,1510157887.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:08.117Z,1510157888.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:08.133Z,1510157888.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:08.526Z,1510157888.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:08.547Z,1510157888.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:08.929Z,1510157888.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:08.951Z,1510157888.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:09.326Z,1510157889.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:09.347Z,1510157889.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:09.719Z,1510157889.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:09.739Z,1510157889.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:10.122Z,1510157890.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:10.138Z,1510157890.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:10.514Z,1510157890.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:10.545Z,1510157890.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:10.922Z,1510157890.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:10.938Z,1510157890.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:11.322Z,1510157891.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:11.338Z,1510157891.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:11.726Z,1510157891.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:11.742Z,1510157891.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:12.129Z,1510157892.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:12.146Z,1510157892.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:12.530Z,1510157892.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:12.551Z,1510157892.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:12.917Z,1510157892.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:12.933Z,1510157892.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:13.320Z,1510157893.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:13.337Z,1510157893.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:13.723Z,1510157893.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:13.743Z,1510157893.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:14.121Z,1510157894.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:14.175Z,1510157894.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:14.526Z,1510157894.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:14.547Z,1510157894.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:14.930Z,1510157894.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:14.946Z,1510157894.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:15.326Z,1510157895.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:15.347Z,1510157895.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:15.720Z,1510157895.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:15.737Z,1510157895.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:16.122Z,1510157896.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:16.138Z,1510157896.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:16.514Z,1510157896.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:16.547Z,1510157896.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:16.922Z,1510157896.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:16.938Z,1510157896.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:17.322Z,1510157897.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:17.338Z,1510157897.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:17.726Z,1510157897.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:17.747Z,1510157897.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:18.129Z,1510157898.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:18.146Z,1510157898.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:18.531Z,1510157898.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:18.552Z,1510157898.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:18.921Z,1510157898.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:18.943Z,1510157898.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:19.321Z,1510157899.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:19.338Z,1510157899.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:19.723Z,1510157899.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:19.744Z,1510157899.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:20.121Z,1510157900.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:20.143Z,1510157900.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:20.530Z,1510157900.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:20.547Z,1510157900.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:20.931Z,1510157900.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:20.952Z,1510157900.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:21.330Z,1510157901.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:21.352Z,1510157901.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:24.434Z,1510157904.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:24.454Z,1510157904.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:24.588Z,1510157904.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:24.604Z,1510157904.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:25.002Z,1510157905.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:25.049Z,1510157905.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:25.401Z,1510157905.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:25.429Z,1510157905.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:25.798Z,1510157905.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:25.845Z,1510157905.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:26.190Z,1510157906.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:26.206Z,1510157906.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:26.588Z,1510157906.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:26.604Z,1510157906.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:26.989Z,1510157906.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:27.047Z,1510157907.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:27.398Z,1510157907.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:27.414Z,1510157907.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:27.793Z,1510157907.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:27.841Z,1510157907.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:28.198Z,1510157908.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:28.214Z,1510157908.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:28.588Z,1510157908.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:28.609Z,1510157908.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:28.987Z,1510157908.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:29.003Z,1510157909.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:29.398Z,1510157909.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:29.414Z,1510157909.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:29.797Z,1510157909.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:29.814Z,1510157909.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:30.193Z,1510157910.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:30.216Z,1510157910.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:30.591Z,1510157910.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:30.611Z,1510157910.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:30.987Z,1510157910.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:31.019Z,1510157911.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:31.394Z,1510157911.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:31.410Z,1510157911.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:31.798Z,1510157911.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:31.814Z,1510157911.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:32.198Z,1510157912.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:32.214Z,1510157912.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:32.590Z,1510157912.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:32.606Z,1510157912.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:32.990Z,1510157912.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:33.006Z,1510157913.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:33.406Z,1510157913.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:33.440Z,1510157913.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:33.798Z,1510157913.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:33.814Z,1510157913.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:34.194Z,1510157914.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:34.211Z,1510157914.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:34.589Z,1510157914.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:34.621Z,1510157914.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:34.990Z,1510157914.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:35.006Z,1510157915.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:35.400Z,1510157915.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:35.417Z,1510157915.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:35.799Z,1510157915.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:35.820Z,1510157915.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:36.200Z,1510157916.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:36.249Z,1510157916.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:36.592Z,1510157916.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:36.609Z,1510157916.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:36.987Z,1510157916.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:37.010Z,1510157917.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:37.400Z,1510157917.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:37.423Z,1510157917.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:37.799Z,1510157917.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:37.824Z,1510157917.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:38.199Z,1510157918.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:38.220Z,1510157918.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:38.592Z,1510157918.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:38.608Z,1510157918.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:38.990Z,1510157918.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:39.007Z,1510157919.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:39.398Z,1510157919.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:39.415Z,1510157919.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:39.799Z,1510157919.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:39.815Z,1510157919.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:40.199Z,1510157920.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:40.220Z,1510157920.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:40.589Z,1510157920.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:40.610Z,1510157920.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:40.990Z,1510157920.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:41.024Z,1510157921.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:41.403Z,1510157921.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:41.424Z,1510157921.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:41.803Z,1510157921.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:41.823Z,1510157921.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:42.200Z,1510157922.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:42.227Z,1510157922.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:42.591Z,1510157922.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:42.608Z,1510157922.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:42.987Z,1510157922.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:43.018Z,1510157923.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:43.403Z,1510157923.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:43.423Z,1510157923.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:43.800Z,1510157923.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:43.816Z,1510157923.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:44.203Z,1510157924.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:44.223Z,1510157924.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:44.580Z,1510157924.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:44.606Z,1510157924.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:44.980Z,1510157924.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:45.017Z,1510157925.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:45.398Z,1510157925.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:45.420Z,1510157925.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:45.804Z,1510157925.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:45.820Z,1510157925.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:46.198Z,1510157926.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:46.220Z,1510157926.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:46.585Z,1510157926.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:46.618Z,1510157926.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:46.980Z,1510157926.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:47.016Z,1510157927.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:47.401Z,1510157927.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:47.417Z,1510157927.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:47.803Z,1510157927.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:47.820Z,1510157927.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:48.203Z,1510157928.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:48.265Z,1510157928.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:48.585Z,1510157928.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:48.613Z,1510157928.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:48.983Z,1510157928.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:49.035Z,1510157929.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:49.401Z,1510157929.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:49.417Z,1510157929.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:49.798Z,1510157929.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:49.857Z,1510157929.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:50.190Z,1510157930.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:50.222Z,1510157930.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:50.585Z,1510157930.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:50.615Z,1510157930.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:50.984Z,1510157930.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:51.014Z,1510157931.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:51.400Z,1510157931.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:51.417Z,1510157931.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:51.801Z,1510157931.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:51.817Z,1510157931.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:52.190Z,1510157932.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:52.222Z,1510157932.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:52.585Z,1510157932.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:52.615Z,1510157932.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:52.983Z,1510157932.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:53.014Z,1510157933.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:53.400Z,1510157933.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:53.417Z,1510157933.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:53.800Z,1510157933.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:53.817Z,1510157933.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:54.201Z,1510157934.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:54.217Z,1510157934.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:54.585Z,1510157934.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:54.614Z,1510157934.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:54.983Z,1510157934.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:55.018Z,1510157935.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:55.366Z,1510157935.366 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T16:18:55.366Z,1510157935.366 [NAL9602] Data Fault, FailCount= 2
2017-11-08T16:18:55.367Z,1510157935.367 [NAL9602](ERROR): Data Fault
2017-11-08T16:18:55.384Z,1510157935.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:55.423Z,1510157935.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:55.498Z,1510157935.498 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T16:18:55.762Z,1510157935.762 [NAL9602](INFO): Powering down
2017-11-08T16:18:55.780Z,1510157935.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:55.808Z,1510157935.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:56.183Z,1510157936.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:56.212Z,1510157936.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:56.583Z,1510157936.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:56.599Z,1510157936.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:56.704Z,1510157936.704 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T16:18:56.704Z,1510157936.704 [NAL9602] No Fault, FailCount= 2
2017-11-08T16:18:56.979Z,1510157936.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:56.996Z,1510157936.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:57.383Z,1510157937.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:57.399Z,1510157937.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:57.779Z,1510157937.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:57.799Z,1510157937.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:58.179Z,1510157938.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:58.234Z,1510157938.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:58.583Z,1510157938.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:58.600Z,1510157938.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:58.979Z,1510157938.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:58.999Z,1510157938.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:59.383Z,1510157939.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:59.399Z,1510157939.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:18:59.783Z,1510157939.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:18:59.800Z,1510157939.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:00.179Z,1510157940.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:00.199Z,1510157940.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:00.579Z,1510157940.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:00.595Z,1510157940.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:00.983Z,1510157940.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:00.000Z,1510157941.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:01.379Z,1510157941.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:01.395Z,1510157941.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:01.779Z,1510157941.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:01.795Z,1510157941.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:02.187Z,1510157942.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:02.203Z,1510157942.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:02.582Z,1510157942.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:02.598Z,1510157942.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:02.986Z,1510157942.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:03.002Z,1510157943.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:03.386Z,1510157943.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:03.403Z,1510157943.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:03.782Z,1510157943.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:03.798Z,1510157943.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:04.182Z,1510157944.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:04.198Z,1510157944.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:04.586Z,1510157944.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:04.603Z,1510157944.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:04.982Z,1510157944.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:05.003Z,1510157945.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:05.382Z,1510157945.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:05.398Z,1510157945.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:05.787Z,1510157945.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:05.803Z,1510157945.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:06.183Z,1510157946.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:06.203Z,1510157946.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:06.583Z,1510157946.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:06.599Z,1510157946.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:06.987Z,1510157946.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:07.003Z,1510157947.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:07.383Z,1510157947.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:07.399Z,1510157947.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:07.783Z,1510157947.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:07.800Z,1510157947.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:08.187Z,1510157948.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:08.203Z,1510157948.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:08.583Z,1510157948.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:08.603Z,1510157948.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:08.989Z,1510157948.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:09.005Z,1510157949.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:09.390Z,1510157949.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:09.407Z,1510157949.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:09.783Z,1510157949.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:09.832Z,1510157949.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:10.189Z,1510157950.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:10.254Z,1510157950.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:10.587Z,1510157950.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:10.604Z,1510157950.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:10.987Z,1510157950.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:11.039Z,1510157951.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:11.392Z,1510157951.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:11.408Z,1510157951.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:11.793Z,1510157951.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:11.843Z,1510157951.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:12.186Z,1510157952.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:12.207Z,1510157952.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:12.587Z,1510157952.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:12.604Z,1510157952.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:12.991Z,1510157952.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:13.008Z,1510157953.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:13.387Z,1510157953.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:13.403Z,1510157953.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:13.791Z,1510157953.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:13.808Z,1510157953.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:14.188Z,1510157954.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:14.227Z,1510157954.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:14.586Z,1510157954.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:14.602Z,1510157954.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:14.990Z,1510157954.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:15.007Z,1510157955.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:15.390Z,1510157955.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:15.407Z,1510157955.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:15.785Z,1510157955.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:15.802Z,1510157955.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:16.185Z,1510157956.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:16.202Z,1510157956.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:16.589Z,1510157956.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:16.606Z,1510157956.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:16.985Z,1510157956.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:17.008Z,1510157957.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:17.385Z,1510157957.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:17.401Z,1510157957.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:17.785Z,1510157957.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:17.807Z,1510157957.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:18.185Z,1510157958.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:18.201Z,1510157958.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:18.585Z,1510157958.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:18.601Z,1510157958.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:18.989Z,1510157958.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:19.005Z,1510157959.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:19.385Z,1510157959.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:19.401Z,1510157959.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:19.785Z,1510157959.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:19.801Z,1510157959.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:20.189Z,1510157960.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:20.233Z,1510157960.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:20.589Z,1510157960.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:20.605Z,1510157960.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:20.990Z,1510157960.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:21.007Z,1510157961.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:21.391Z,1510157961.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:21.407Z,1510157961.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:24.466Z,1510157964.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:24.490Z,1510157964.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:24.601Z,1510157964.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:24.647Z,1510157964.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:25.007Z,1510157965.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:25.038Z,1510157965.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:25.411Z,1510157965.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:25.435Z,1510157965.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:25.790Z,1510157965.790 [NAL9602](INFO): Powering up NAL9602
2017-11-08T16:19:25.808Z,1510157965.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:25.841Z,1510157965.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:26.207Z,1510157966.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:26.244Z,1510157966.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:26.607Z,1510157966.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:26.643Z,1510157966.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:27.007Z,1510157967.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:27.039Z,1510157967.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:27.407Z,1510157967.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:27.448Z,1510157967.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:27.807Z,1510157967.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:27.823Z,1510157967.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:28.207Z,1510157968.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:28.228Z,1510157968.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:28.610Z,1510157968.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:28.631Z,1510157968.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:29.011Z,1510157969.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:29.026Z,1510157969.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:29.410Z,1510157969.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:29.426Z,1510157969.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:29.810Z,1510157969.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:29.826Z,1510157969.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:30.207Z,1510157970.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:30.227Z,1510157970.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:30.610Z,1510157970.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:30.627Z,1510157970.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:31.007Z,1510157971.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:31.023Z,1510157971.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:31.410Z,1510157971.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:31.418Z,1510157971.418 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T16:19:31.418Z,1510157971.418 [BPC1] Data Fault, FailCount= 1
2017-11-08T16:19:31.418Z,1510157971.418 [BPC1](ERROR): Data Fault
2017-11-08T16:19:31.427Z,1510157971.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:31.537Z,1510157971.537 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T16:19:31.808Z,1510157971.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:31.831Z,1510157971.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:32.210Z,1510157972.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:32.226Z,1510157972.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:32.610Z,1510157972.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:32.626Z,1510157972.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:32.701Z,1510157972.701 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T16:19:32.701Z,1510157972.701 [BPC1] No Fault, FailCount= 1
2017-11-08T16:19:33.009Z,1510157973.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:33.075Z,1510157973.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:33.410Z,1510157973.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:33.426Z,1510157973.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:33.810Z,1510157973.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:33.826Z,1510157973.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:34.209Z,1510157974.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:34.227Z,1510157974.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:34.610Z,1510157974.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:34.625Z,1510157974.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:35.010Z,1510157975.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:35.026Z,1510157975.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:35.410Z,1510157975.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:35.426Z,1510157975.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:35.810Z,1510157975.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:35.826Z,1510157975.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:36.222Z,1510157976.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:36.238Z,1510157976.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:36.586Z,1510157976.586 [NAL9602](INFO): NAL9602 initialized
2017-11-08T16:19:36.613Z,1510157976.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:36.629Z,1510157976.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:37.010Z,1510157977.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:37.031Z,1510157977.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:37.422Z,1510157977.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:37.438Z,1510157977.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:37.817Z,1510157977.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:37.834Z,1510157977.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:38.220Z,1510157978.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:38.236Z,1510157978.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:38.610Z,1510157978.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:38.627Z,1510157978.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:39.009Z,1510157979.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:39.025Z,1510157979.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:39.421Z,1510157979.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:39.437Z,1510157979.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:39.821Z,1510157979.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:39.838Z,1510157979.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:40.217Z,1510157980.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:40.234Z,1510157980.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:40.612Z,1510157980.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:40.640Z,1510157980.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:41.014Z,1510157981.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:41.030Z,1510157981.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:41.420Z,1510157981.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:41.479Z,1510157981.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:41.827Z,1510157981.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:41.847Z,1510157981.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:42.227Z,1510157982.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:42.247Z,1510157982.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:42.604Z,1510157982.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:42.633Z,1510157982.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:43.007Z,1510157983.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:43.033Z,1510157983.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:43.427Z,1510157983.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:43.444Z,1510157983.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:43.823Z,1510157983.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:43.840Z,1510157983.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:44.228Z,1510157984.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:44.251Z,1510157984.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:44.608Z,1510157984.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:44.634Z,1510157984.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:45.007Z,1510157985.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:45.033Z,1510157985.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:45.428Z,1510157985.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:45.444Z,1510157985.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:45.827Z,1510157985.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:45.844Z,1510157985.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:46.219Z,1510157986.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:46.236Z,1510157986.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:46.608Z,1510157986.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:46.634Z,1510157986.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:47.007Z,1510157987.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:47.033Z,1510157987.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:47.420Z,1510157987.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:47.436Z,1510157987.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:47.828Z,1510157987.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:47.844Z,1510157987.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:48.227Z,1510157988.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:48.251Z,1510157988.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:48.608Z,1510157988.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:48.634Z,1510157988.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:49.007Z,1510157989.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:49.036Z,1510157989.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:49.428Z,1510157989.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:49.444Z,1510157989.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:49.827Z,1510157989.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:49.844Z,1510157989.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:50.230Z,1510157990.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:50.246Z,1510157990.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:50.609Z,1510157990.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:50.639Z,1510157990.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:51.007Z,1510157991.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:51.042Z,1510157991.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:51.434Z,1510157991.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:51.455Z,1510157991.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:51.829Z,1510157991.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:51.846Z,1510157991.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:52.227Z,1510157992.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:52.248Z,1510157992.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:52.610Z,1510157992.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:52.643Z,1510157992.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:53.006Z,1510157993.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:53.038Z,1510157993.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:53.415Z,1510157993.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:53.486Z,1510157993.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:53.823Z,1510157993.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:53.873Z,1510157993.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:54.219Z,1510157994.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:54.248Z,1510157994.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:54.612Z,1510157994.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:54.630Z,1510157994.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:55.011Z,1510157995.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:55.069Z,1510157995.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:55.423Z,1510157995.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:55.459Z,1510157995.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:55.821Z,1510157995.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:55.871Z,1510157995.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:56.221Z,1510157996.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:56.255Z,1510157996.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:56.611Z,1510157996.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:56.628Z,1510157996.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:57.006Z,1510157997.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:57.022Z,1510157997.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:57.421Z,1510157997.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:57.454Z,1510157997.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:57.821Z,1510157997.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:57.853Z,1510157997.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:58.223Z,1510157998.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:58.256Z,1510157998.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:58.611Z,1510157998.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:58.627Z,1510157998.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:59.009Z,1510157999.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:59.025Z,1510157999.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:59.421Z,1510157999.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:59.438Z,1510157999.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:19:59.821Z,1510157999.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:19:59.837Z,1510157999.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:00.218Z,1510158000.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:00.234Z,1510158000.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:00.613Z,1510158000.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:00.630Z,1510158000.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:01.013Z,1510158001.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:01.029Z,1510158001.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:01.418Z,1510158001.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:01.434Z,1510158001.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:01.821Z,1510158001.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:01.838Z,1510158001.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:02.220Z,1510158002.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:02.236Z,1510158002.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:02.614Z,1510158002.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:02.630Z,1510158002.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:03.013Z,1510158003.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:03.029Z,1510158003.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:03.421Z,1510158003.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:03.437Z,1510158003.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:03.818Z,1510158003.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:03.834Z,1510158003.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:04.217Z,1510158004.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:04.263Z,1510158004.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:04.612Z,1510158004.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:04.640Z,1510158004.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:05.014Z,1510158005.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:05.030Z,1510158005.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:05.423Z,1510158005.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:05.444Z,1510158005.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:05.823Z,1510158005.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:05.843Z,1510158005.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:06.223Z,1510158006.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:06.243Z,1510158006.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:06.614Z,1510158006.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:06.631Z,1510158006.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:07.014Z,1510158007.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:07.030Z,1510158007.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:07.420Z,1510158007.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:07.437Z,1510158007.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:07.822Z,1510158007.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:07.839Z,1510158007.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:08.223Z,1510158008.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:08.239Z,1510158008.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:08.609Z,1510158008.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:08.626Z,1510158008.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:09.013Z,1510158009.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:09.030Z,1510158009.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:09.423Z,1510158009.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:09.439Z,1510158009.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:09.823Z,1510158009.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:09.839Z,1510158009.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:10.223Z,1510158010.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:10.239Z,1510158010.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:10.615Z,1510158010.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:10.631Z,1510158010.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:11.003Z,1510158011.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:11.034Z,1510158011.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:11.424Z,1510158011.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:11.440Z,1510158011.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:11.827Z,1510158011.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:11.847Z,1510158011.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:12.223Z,1510158012.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:12.240Z,1510158012.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:12.614Z,1510158012.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:12.631Z,1510158012.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:13.011Z,1510158013.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:13.039Z,1510158013.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:13.427Z,1510158013.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:13.448Z,1510158013.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:13.826Z,1510158013.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:13.848Z,1510158013.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:14.226Z,1510158014.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:14.265Z,1510158014.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:14.604Z,1510158014.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:14.642Z,1510158014.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:15.014Z,1510158015.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:15.030Z,1510158015.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:15.427Z,1510158015.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:15.447Z,1510158015.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:15.826Z,1510158015.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:15.848Z,1510158015.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:16.223Z,1510158016.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:16.311Z,1510158016.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:16.608Z,1510158016.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:16.634Z,1510158016.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:17.003Z,1510158017.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:17.038Z,1510158017.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:17.424Z,1510158017.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:17.483Z,1510158017.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:17.828Z,1510158017.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:17.845Z,1510158017.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:18.218Z,1510158018.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:18.275Z,1510158018.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:18.608Z,1510158018.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:18.642Z,1510158018.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:19.008Z,1510158019.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:19.044Z,1510158019.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:19.425Z,1510158019.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:19.441Z,1510158019.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:19.827Z,1510158019.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:19.844Z,1510158019.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:20.228Z,1510158020.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:20.244Z,1510158020.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:20.608Z,1510158020.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:20.639Z,1510158020.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:21.007Z,1510158021.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:21.040Z,1510158021.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:21.433Z,1510158021.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:21.456Z,1510158021.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:24.539Z,1510158024.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:24.556Z,1510158024.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:24.702Z,1510158024.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:24.740Z,1510158024.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:25.090Z,1510158025.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:25.107Z,1510158025.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:25.486Z,1510158025.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:25.503Z,1510158025.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:25.887Z,1510158025.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:25.907Z,1510158025.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:26.286Z,1510158026.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:26.343Z,1510158026.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:26.690Z,1510158026.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:26.707Z,1510158026.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:27.098Z,1510158027.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:27.114Z,1510158027.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:27.498Z,1510158027.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:27.514Z,1510158027.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:27.886Z,1510158027.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:27.903Z,1510158027.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:28.286Z,1510158028.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:28.303Z,1510158028.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:28.687Z,1510158028.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:28.707Z,1510158028.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:29.086Z,1510158029.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:29.102Z,1510158029.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:29.498Z,1510158029.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:29.514Z,1510158029.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:29.898Z,1510158029.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:29.914Z,1510158029.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:30.290Z,1510158030.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:30.307Z,1510158030.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:30.688Z,1510158030.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:30.711Z,1510158030.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:31.088Z,1510158031.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:31.108Z,1510158031.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:31.488Z,1510158031.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:31.505Z,1510158031.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:31.889Z,1510158031.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:31.905Z,1510158031.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:32.289Z,1510158032.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:32.306Z,1510158032.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:32.694Z,1510158032.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:32.711Z,1510158032.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:33.098Z,1510158033.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:33.114Z,1510158033.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:33.498Z,1510158033.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:33.514Z,1510158033.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:33.889Z,1510158033.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:33.905Z,1510158033.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:34.289Z,1510158034.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:34.306Z,1510158034.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:34.688Z,1510158034.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:34.721Z,1510158034.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:35.090Z,1510158035.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:35.106Z,1510158035.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:35.498Z,1510158035.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:35.514Z,1510158035.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:35.898Z,1510158035.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:35.914Z,1510158035.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:36.296Z,1510158036.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:36.320Z,1510158036.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:36.690Z,1510158036.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:36.706Z,1510158036.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:37.095Z,1510158037.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:37.115Z,1510158037.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:37.483Z,1510158037.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:37.507Z,1510158037.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:37.888Z,1510158037.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:37.904Z,1510158037.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:38.290Z,1510158038.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:38.339Z,1510158038.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:38.705Z,1510158038.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:38.779Z,1510158038.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:39.103Z,1510158039.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:39.120Z,1510158039.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:39.505Z,1510158039.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:39.521Z,1510158039.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:39.880Z,1510158039.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:39.947Z,1510158039.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:40.280Z,1510158040.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:40.307Z,1510158040.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:40.691Z,1510158040.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:40.751Z,1510158040.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:41.089Z,1510158041.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:41.107Z,1510158041.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:41.501Z,1510158041.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:41.518Z,1510158041.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:41.906Z,1510158041.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:41.922Z,1510158041.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:42.300Z,1510158042.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:42.318Z,1510158042.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:42.679Z,1510158042.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:42.715Z,1510158042.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:43.083Z,1510158043.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:43.116Z,1510158043.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:43.479Z,1510158043.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:43.514Z,1510158043.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:43.884Z,1510158043.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:43.914Z,1510158043.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:44.283Z,1510158044.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:44.312Z,1510158044.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:44.694Z,1510158044.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:44.726Z,1510158044.726 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:44.726Z,1510158044.726 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59
2017-11-08T16:20:44.726Z,1510158044.726 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T16:20:44.727Z,1510158044.727 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:44.728Z,1510158044.728 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59
2017-11-08T16:20:44.728Z,1510158044.728 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T16:20:44.731Z,1510158044.731 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:44.731Z,1510158044.731 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 59
2017-11-08T16:20:44.731Z,1510158044.731 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T16:20:44.809Z,1510158044.809 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T16:20:44.809Z,1510158044.809 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T16:20:44.810Z,1510158044.810 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T16:20:45.093Z,1510158045.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:45.209Z,1510158045.209 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T16:20:45.209Z,1510158045.209 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59
2017-11-08T16:20:45.210Z,1510158045.210 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T16:20:45.210Z,1510158045.210 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59
2017-11-08T16:20:45.210Z,1510158045.210 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T16:20:45.210Z,1510158045.210 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 59
2017-11-08T16:20:45.498Z,1510158045.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:45.523Z,1510158045.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T16:20:45.524Z,1510158045.524 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:20:45.524Z,1510158045.524 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:20:45.525Z,1510158045.525 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T16:20:45.525Z,1510158045.525 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:20:45.525Z,1510158045.525 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:20:45.526Z,1510158045.526 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T16:20:45.526Z,1510158045.526 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:20:45.526Z,1510158045.526 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:20:45.883Z,1510158045.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:45.903Z,1510158045.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T16:20:45.904Z,1510158045.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:46.282Z,1510158046.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:46.297Z,1510158046.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T16:20:46.298Z,1510158046.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:46.686Z,1510158046.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:46.707Z,1510158046.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T16:20:46.708Z,1510158046.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:47.086Z,1510158047.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:47.102Z,1510158047.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T16:20:47.103Z,1510158047.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:47.489Z,1510158047.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:47.505Z,1510158047.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T16:20:47.506Z,1510158047.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:47.897Z,1510158047.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:47.929Z,1510158047.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T16:20:47.930Z,1510158047.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:48.298Z,1510158048.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:48.313Z,1510158048.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T16:20:48.314Z,1510158048.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:48.688Z,1510158048.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:48.703Z,1510158048.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T16:20:48.704Z,1510158048.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:49.088Z,1510158049.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:49.139Z,1510158049.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T16:20:49.140Z,1510158049.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:49.486Z,1510158049.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:49.502Z,1510158049.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T16:20:49.503Z,1510158049.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:49.885Z,1510158049.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:49.902Z,1510158049.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T16:20:49.903Z,1510158049.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:50.288Z,1510158050.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:50.308Z,1510158050.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T16:20:50.309Z,1510158050.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:50.694Z,1510158050.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:50.710Z,1510158050.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T16:20:50.711Z,1510158050.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:51.097Z,1510158051.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:51.113Z,1510158051.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T16:20:51.114Z,1510158051.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:51.498Z,1510158051.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:51.514Z,1510158051.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T16:20:51.514Z,1510158051.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:51.885Z,1510158051.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:51.901Z,1510158051.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T16:20:51.902Z,1510158051.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:52.285Z,1510158052.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:52.301Z,1510158052.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T16:20:52.302Z,1510158052.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:52.683Z,1510158052.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:52.714Z,1510158052.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T16:20:52.715Z,1510158052.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:53.085Z,1510158053.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:53.101Z,1510158053.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T16:20:53.102Z,1510158053.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:53.495Z,1510158053.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:53.511Z,1510158053.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T16:20:53.512Z,1510158053.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:53.900Z,1510158053.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:53.916Z,1510158053.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T16:20:53.917Z,1510158053.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:54.296Z,1510158054.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:54.312Z,1510158054.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T16:20:54.313Z,1510158054.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:54.679Z,1510158054.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:54.704Z,1510158054.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T16:20:54.705Z,1510158054.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:55.087Z,1510158055.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:55.122Z,1510158055.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T16:20:55.123Z,1510158055.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:55.479Z,1510158055.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:55.504Z,1510158055.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T16:20:55.505Z,1510158055.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:55.880Z,1510158055.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:55.913Z,1510158055.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T16:20:55.914Z,1510158055.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:56.284Z,1510158056.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:56.316Z,1510158056.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T16:20:56.321Z,1510158056.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:56.699Z,1510158056.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:56.719Z,1510158056.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T16:20:56.720Z,1510158056.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:57.099Z,1510158057.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:57.115Z,1510158057.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T16:20:57.116Z,1510158057.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:57.504Z,1510158057.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:57.520Z,1510158057.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T16:20:57.522Z,1510158057.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:57.883Z,1510158057.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:57.916Z,1510158057.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T16:20:57.921Z,1510158057.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:58.279Z,1510158058.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:58.315Z,1510158058.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T16:20:58.316Z,1510158058.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:58.684Z,1510158058.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:58.700Z,1510158058.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T16:20:58.717Z,1510158058.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:59.083Z,1510158059.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:59.103Z,1510158059.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T16:20:59.104Z,1510158059.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:59.497Z,1510158059.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:59.530Z,1510158059.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T16:20:59.530Z,1510158059.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:20:59.902Z,1510158059.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:20:59.928Z,1510158059.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T16:20:59.929Z,1510158059.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:00.298Z,1510158060.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:00.329Z,1510158060.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T16:21:00.330Z,1510158060.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:00.687Z,1510158060.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:00.707Z,1510158060.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T16:21:00.708Z,1510158060.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:01.086Z,1510158061.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:01.162Z,1510158061.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T16:21:01.162Z,1510158061.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:01.485Z,1510158061.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:01.542Z,1510158061.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T16:21:01.543Z,1510158061.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:01.886Z,1510158061.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:01.902Z,1510158061.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T16:21:01.902Z,1510158061.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:02.287Z,1510158062.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:02.308Z,1510158062.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T16:21:02.313Z,1510158062.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:02.698Z,1510158062.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:02.753Z,1510158062.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T16:21:02.754Z,1510158062.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:03.098Z,1510158063.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:03.114Z,1510158063.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T16:21:03.115Z,1510158063.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:03.499Z,1510158063.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:03.554Z,1510158063.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T16:21:03.555Z,1510158063.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:03.885Z,1510158063.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:03.901Z,1510158063.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T16:21:03.902Z,1510158063.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:04.285Z,1510158064.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:04.301Z,1510158064.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T16:21:04.302Z,1510158064.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:04.691Z,1510158064.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:04.707Z,1510158064.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-08T16:21:04.708Z,1510158064.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:05.083Z,1510158065.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:05.104Z,1510158065.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:05.495Z,1510158065.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:05.512Z,1510158065.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:05.899Z,1510158065.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:05.920Z,1510158065.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:06.298Z,1510158066.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:06.314Z,1510158066.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:06.685Z,1510158066.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:06.701Z,1510158066.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:07.090Z,1510158067.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:07.106Z,1510158067.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:07.483Z,1510158067.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:07.504Z,1510158067.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:07.890Z,1510158067.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:07.906Z,1510158067.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:08.290Z,1510158068.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:08.306Z,1510158068.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:08.698Z,1510158068.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:08.714Z,1510158068.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:09.098Z,1510158069.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:09.114Z,1510158069.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:09.499Z,1510158069.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:09.516Z,1510158069.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:09.885Z,1510158069.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:09.902Z,1510158069.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:10.285Z,1510158070.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:10.302Z,1510158070.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:10.691Z,1510158070.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:10.707Z,1510158070.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:11.083Z,1510158071.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:11.104Z,1510158071.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:11.495Z,1510158071.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:11.512Z,1510158071.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:11.899Z,1510158071.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:11.954Z,1510158071.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:12.299Z,1510158072.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:12.319Z,1510158072.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:12.685Z,1510158072.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:12.701Z,1510158072.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:13.087Z,1510158073.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:13.109Z,1510158073.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:13.483Z,1510158073.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:13.505Z,1510158073.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:13.886Z,1510158073.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:13.902Z,1510158073.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:14.291Z,1510158074.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:14.307Z,1510158074.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:14.699Z,1510158074.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:14.716Z,1510158074.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:15.099Z,1510158075.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:15.116Z,1510158075.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:15.500Z,1510158075.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:15.517Z,1510158075.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:15.883Z,1510158075.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:15.906Z,1510158075.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:16.291Z,1510158076.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:16.308Z,1510158076.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:16.689Z,1510158076.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:16.711Z,1510158076.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:17.083Z,1510158077.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:17.106Z,1510158077.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:17.500Z,1510158077.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:17.517Z,1510158077.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:17.900Z,1510158077.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:17.916Z,1510158077.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:18.300Z,1510158078.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:18.316Z,1510158078.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:18.683Z,1510158078.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:18.707Z,1510158078.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:19.092Z,1510158079.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:19.109Z,1510158079.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:19.486Z,1510158079.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:19.509Z,1510158079.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:19.884Z,1510158079.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:19.908Z,1510158079.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:20.291Z,1510158080.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:20.308Z,1510158080.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:20.698Z,1510158080.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:20.720Z,1510158080.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:21.099Z,1510158081.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:21.124Z,1510158081.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:21.503Z,1510158081.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:21.545Z,1510158081.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:24.597Z,1510158084.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:24.686Z,1510158084.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:24.810Z,1510158084.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:24.851Z,1510158084.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:25.222Z,1510158085.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:25.276Z,1510158085.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:25.617Z,1510158085.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:25.655Z,1510158085.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:26.005Z,1510158086.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:26.055Z,1510158086.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:26.400Z,1510158086.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:26.438Z,1510158086.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:26.803Z,1510158086.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:26.824Z,1510158086.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:27.203Z,1510158087.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:27.224Z,1510158087.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:27.614Z,1510158087.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:27.648Z,1510158087.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:28.010Z,1510158088.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:28.028Z,1510158088.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:28.422Z,1510158088.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:28.456Z,1510158088.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:28.804Z,1510158088.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:28.821Z,1510158088.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:29.204Z,1510158089.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:29.221Z,1510158089.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:29.605Z,1510158089.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:29.622Z,1510158089.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:30.007Z,1510158090.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:30.028Z,1510158090.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:30.411Z,1510158090.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:30.428Z,1510158090.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:30.811Z,1510158090.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:30.830Z,1510158090.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:31.216Z,1510158091.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:31.235Z,1510158091.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:31.601Z,1510158091.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:31.624Z,1510158091.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:32.001Z,1510158092.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:32.019Z,1510158092.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:32.413Z,1510158092.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:32.436Z,1510158092.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:32.810Z,1510158092.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:32.829Z,1510158092.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:33.210Z,1510158093.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:33.228Z,1510158093.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:33.606Z,1510158093.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:33.622Z,1510158093.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:33.999Z,1510158093.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:34.020Z,1510158094.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:34.410Z,1510158094.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:34.472Z,1510158094.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:34.813Z,1510158094.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:34.835Z,1510158094.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:35.214Z,1510158095.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:35.231Z,1510158095.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:35.602Z,1510158095.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:35.618Z,1510158095.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:36.006Z,1510158096.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:36.022Z,1510158096.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:36.414Z,1510158096.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:36.431Z,1510158096.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:36.814Z,1510158096.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:36.837Z,1510158096.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:37.219Z,1510158097.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:37.260Z,1510158097.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:37.606Z,1510158097.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:37.622Z,1510158097.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:38.001Z,1510158098.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:38.017Z,1510158098.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:38.414Z,1510158098.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:38.437Z,1510158098.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:38.814Z,1510158098.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:38.838Z,1510158098.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:39.212Z,1510158099.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:39.228Z,1510158099.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:39.606Z,1510158099.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:39.622Z,1510158099.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:40.001Z,1510158100.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:40.018Z,1510158100.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:40.412Z,1510158100.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:40.431Z,1510158100.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:40.814Z,1510158100.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:40.835Z,1510158100.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:41.215Z,1510158101.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:41.235Z,1510158101.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:41.602Z,1510158101.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:41.618Z,1510158101.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:42.006Z,1510158102.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:42.022Z,1510158102.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:42.414Z,1510158102.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:42.431Z,1510158102.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:42.814Z,1510158102.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:42.831Z,1510158102.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:43.218Z,1510158103.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:43.243Z,1510158103.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:43.602Z,1510158103.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:43.619Z,1510158103.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:44.001Z,1510158104.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:44.017Z,1510158104.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:44.415Z,1510158104.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:44.435Z,1510158104.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:44.814Z,1510158104.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:44.832Z,1510158104.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:45.211Z,1510158105.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:45.231Z,1510158105.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:45.607Z,1510158105.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:45.623Z,1510158105.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:46.005Z,1510158106.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:46.022Z,1510158106.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:46.412Z,1510158106.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:46.503Z,1510158106.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:46.820Z,1510158106.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:46.843Z,1510158106.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:47.219Z,1510158107.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:47.279Z,1510158107.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:47.600Z,1510158107.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:47.625Z,1510158107.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:47.999Z,1510158107.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:48.062Z,1510158108.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:48.414Z,1510158108.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:48.438Z,1510158108.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:48.815Z,1510158108.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:48.831Z,1510158108.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:49.218Z,1510158109.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:49.261Z,1510158109.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:49.600Z,1510158109.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:49.635Z,1510158109.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:49.995Z,1510158109.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:50.020Z,1510158110.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:50.420Z,1510158110.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:50.436Z,1510158110.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:50.819Z,1510158110.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:50.839Z,1510158110.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:51.211Z,1510158111.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:51.228Z,1510158111.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:51.599Z,1510158111.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:51.625Z,1510158111.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:51.999Z,1510158111.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:52.035Z,1510158112.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:52.411Z,1510158112.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:52.428Z,1510158112.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:52.820Z,1510158112.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:52.846Z,1510158112.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:53.219Z,1510158113.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:53.240Z,1510158113.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:53.596Z,1510158113.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:53.629Z,1510158113.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:53.995Z,1510158113.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:54.020Z,1510158114.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:54.419Z,1510158114.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:54.447Z,1510158114.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:54.819Z,1510158114.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:54.839Z,1510158114.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:55.220Z,1510158115.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:55.243Z,1510158115.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:55.600Z,1510158115.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:55.625Z,1510158115.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:55.999Z,1510158115.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:56.024Z,1510158116.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:56.420Z,1510158116.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:56.465Z,1510158116.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:56.820Z,1510158116.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:56.843Z,1510158116.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:57.211Z,1510158117.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:57.228Z,1510158117.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:57.600Z,1510158117.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:57.625Z,1510158117.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:57.999Z,1510158117.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:58.038Z,1510158118.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:58.411Z,1510158118.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:58.428Z,1510158118.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:58.820Z,1510158118.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:58.836Z,1510158118.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:59.220Z,1510158119.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:59.247Z,1510158119.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:59.596Z,1510158119.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:21:59.634Z,1510158119.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:21:59.999Z,1510158119.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:00.024Z,1510158120.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:00.420Z,1510158120.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:00.443Z,1510158120.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:00.815Z,1510158120.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:00.832Z,1510158120.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:01.222Z,1510158121.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:01.242Z,1510158121.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:01.600Z,1510158121.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:01.625Z,1510158121.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:01.999Z,1510158121.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:02.024Z,1510158122.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:02.419Z,1510158122.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:02.437Z,1510158122.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:02.819Z,1510158122.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:02.840Z,1510158122.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:03.212Z,1510158123.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:03.229Z,1510158123.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:03.600Z,1510158123.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:03.626Z,1510158123.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:03.999Z,1510158123.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:04.024Z,1510158124.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:04.415Z,1510158124.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:04.440Z,1510158124.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:04.821Z,1510158124.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:04.837Z,1510158124.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:05.221Z,1510158125.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:05.237Z,1510158125.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:05.600Z,1510158125.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:05.629Z,1510158125.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:06.003Z,1510158126.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:06.044Z,1510158126.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:06.410Z,1510158126.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:06.444Z,1510158126.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:06.808Z,1510158126.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:06.835Z,1510158126.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:07.222Z,1510158127.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:07.246Z,1510158127.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:07.598Z,1510158127.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:07.628Z,1510158127.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:08.001Z,1510158128.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:08.039Z,1510158128.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:08.415Z,1510158128.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:08.503Z,1510158128.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:08.812Z,1510158128.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:08.828Z,1510158128.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:09.216Z,1510158129.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:09.268Z,1510158129.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:09.603Z,1510158129.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:09.627Z,1510158129.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:09.998Z,1510158129.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:10.055Z,1510158130.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:10.409Z,1510158130.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:10.428Z,1510158130.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:10.813Z,1510158130.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:10.854Z,1510158130.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:11.206Z,1510158131.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:11.230Z,1510158131.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:11.604Z,1510158131.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:11.620Z,1510158131.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:12.004Z,1510158132.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:12.020Z,1510158132.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:12.406Z,1510158132.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:12.431Z,1510158132.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:12.813Z,1510158132.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:12.830Z,1510158132.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:13.214Z,1510158133.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:13.229Z,1510158133.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:13.606Z,1510158133.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:13.622Z,1510158133.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:14.005Z,1510158134.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:14.021Z,1510158134.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:14.413Z,1510158134.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:14.429Z,1510158134.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:14.810Z,1510158134.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:14.832Z,1510158134.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:15.210Z,1510158135.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:15.227Z,1510158135.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:15.606Z,1510158135.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:15.622Z,1510158135.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:16.005Z,1510158136.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:16.021Z,1510158136.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:16.410Z,1510158136.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:16.432Z,1510158136.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:16.813Z,1510158136.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:16.831Z,1510158136.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:17.210Z,1510158137.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:17.229Z,1510158137.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:17.605Z,1510158137.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:17.622Z,1510158137.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:18.006Z,1510158138.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:18.021Z,1510158138.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:18.410Z,1510158138.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:18.467Z,1510158138.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:18.810Z,1510158138.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:18.835Z,1510158138.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:19.214Z,1510158139.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:19.230Z,1510158139.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:19.606Z,1510158139.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:19.622Z,1510158139.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:20.005Z,1510158140.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:20.028Z,1510158140.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:20.413Z,1510158140.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:20.435Z,1510158140.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:20.814Z,1510158140.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:20.830Z,1510158140.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:21.214Z,1510158141.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:21.231Z,1510158141.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:21.607Z,1510158141.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:21.627Z,1510158141.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:24.694Z,1510158144.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:24.711Z,1510158144.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:24.715Z,1510158144.715 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T16:17:21.7Z
2017-11-08T16:22:24.715Z,1510158144.715 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T16:22:24.715Z,1510158144.715 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T16:22:24.830Z,1510158144.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:24.867Z,1510158144.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:25.482Z,1510158145.482 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171108T132236/Courier0020.lzma
2017-11-08T16:22:25.517Z,1510158145.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:25.524Z,1510158145.524 [PNI_TCM](ERROR): CRC does not match. Expected:0x6088 got:0x29723
2017-11-08T16:22:25.557Z,1510158145.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:25.682Z,1510158145.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:25.712Z,1510158145.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:26.041Z,1510158146.041 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0020.lzma.bak
2017-11-08T16:22:26.041Z,1510158146.041 [DataOverHttps](INFO): SBD MOMSN=5222966
2017-11-08T16:22:26.082Z,1510158146.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:26.115Z,1510158146.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:27.011Z,1510158147.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:27.028Z,1510158147.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:27.140Z,1510158147.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:27.188Z,1510158147.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:30.285Z,1510158150.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:30.338Z,1510158150.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:30.486Z,1510158150.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:30.514Z,1510158150.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:30.886Z,1510158150.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:30.941Z,1510158150.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:31.270Z,1510158151.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:31.286Z,1510158151.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:31.675Z,1510158151.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:31.695Z,1510158151.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:32.072Z,1510158152.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:32.124Z,1510158152.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:32.485Z,1510158152.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:32.518Z,1510158152.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:35.566Z,1510158155.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:35.620Z,1510158155.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:35.713Z,1510158155.713 [DataOverHttps](INFO): Sending 220 bytes from file Logs/20171108T132236/Express0021.lzma
2017-11-08T16:22:35.772Z,1510158155.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:35.789Z,1510158155.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:36.132Z,1510158156.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:36.148Z,1510158156.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:36.509Z,1510158156.509 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0021.lzma.bak
2017-11-08T16:22:36.509Z,1510158156.509 [DataOverHttps](INFO): SBD MOMSN=5222968
2017-11-08T16:22:36.531Z,1510158156.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:36.552Z,1510158156.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:37.479Z,1510158157.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:37.495Z,1510158157.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:37.498Z,1510158157.498 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T16:22:37.498Z,1510158157.498 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T16:22:37.498Z,1510158157.498 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T16:22:37.634Z,1510158157.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:37.683Z,1510158157.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:40.734Z,1510158160.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:40.741Z,1510158160.741 [PNI_TCM](ERROR): CRC does not match. Expected:0x21324 got:0x121
2017-11-08T16:22:40.741Z,1510158160.741 [PNI_TCM](ERROR): CRC does not match. Expected:0x50427 got:0x143
2017-11-08T16:22:40.742Z,1510158160.742 [PNI_TCM](ERROR): CRC does not match. Expected:0x28793 got:0x126
2017-11-08T16:22:40.742Z,1510158160.742 [PNI_TCM](ERROR): CRC does not match. Expected:0x44175 got:0x48
2017-11-08T16:22:40.743Z,1510158160.743 [PNI_TCM](ERROR): CRC does not match. Expected:0x58991 got:0x74
2017-11-08T16:22:40.743Z,1510158160.743 [PNI_TCM](ERROR): CRC does not match. Expected:0x38890 got:0x183
2017-11-08T16:22:40.743Z,1510158160.743 [PNI_TCM](ERROR): CRC does not match. Expected:0x21668 got:0x176
2017-11-08T16:22:40.799Z,1510158160.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:40.946Z,1510158160.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:40.977Z,1510158160.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:41.342Z,1510158161.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:41.378Z,1510158161.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:41.730Z,1510158161.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:41.745Z,1510158161.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:42.127Z,1510158162.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:42.144Z,1510158162.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:42.528Z,1510158162.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:42.552Z,1510158162.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:42.930Z,1510158162.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:42.946Z,1510158162.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:43.328Z,1510158163.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:43.344Z,1510158163.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:43.734Z,1510158163.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:43.787Z,1510158163.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:44.138Z,1510158164.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:44.154Z,1510158164.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:44.534Z,1510158164.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:44.550Z,1510158164.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:44.928Z,1510158164.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:44.944Z,1510158164.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:45.329Z,1510158165.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:45.346Z,1510158165.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:45.729Z,1510158165.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:45.751Z,1510158165.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:46.123Z,1510158166.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:46.147Z,1510158166.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:46.538Z,1510158166.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:46.554Z,1510158166.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:46.938Z,1510158166.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:46.954Z,1510158166.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:47.334Z,1510158167.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:47.350Z,1510158167.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:47.729Z,1510158167.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:47.746Z,1510158167.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:48.125Z,1510158168.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:48.147Z,1510158168.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:48.528Z,1510158168.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:48.551Z,1510158168.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:48.930Z,1510158168.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:48.946Z,1510158168.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:49.328Z,1510158169.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:49.345Z,1510158169.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:49.425Z,1510158169.425 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T16:22:49.734Z,1510158169.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:49.750Z,1510158169.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:50.138Z,1510158170.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:50.178Z,1510158170.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:50.535Z,1510158170.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:50.555Z,1510158170.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:50.927Z,1510158170.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:50.970Z,1510158170.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:51.330Z,1510158171.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:51.347Z,1510158171.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:51.730Z,1510158171.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:51.747Z,1510158171.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:52.129Z,1510158172.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:52.145Z,1510158172.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:52.534Z,1510158172.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:52.568Z,1510158172.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:52.939Z,1510158172.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:52.960Z,1510158172.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:53.340Z,1510158173.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:53.364Z,1510158173.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:53.730Z,1510158173.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:53.750Z,1510158173.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:54.123Z,1510158174.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:54.146Z,1510158174.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:54.527Z,1510158174.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:54.559Z,1510158174.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:54.931Z,1510158174.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:54.948Z,1510158174.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:55.330Z,1510158175.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:55.347Z,1510158175.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:55.740Z,1510158175.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:55.808Z,1510158175.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:56.141Z,1510158176.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:56.157Z,1510158176.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:56.540Z,1510158176.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:56.599Z,1510158176.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:56.933Z,1510158176.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:56.949Z,1510158176.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:57.329Z,1510158177.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:57.391Z,1510158177.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:57.729Z,1510158177.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:57.751Z,1510158177.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:58.135Z,1510158178.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:58.155Z,1510158178.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:58.542Z,1510158178.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:58.558Z,1510158178.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:58.944Z,1510158178.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:59.060Z,1510158179.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:59.378Z,1510158179.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:59.458Z,1510158179.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:22:59.718Z,1510158179.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:22:59.897Z,1510158179.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:00.119Z,1510158180.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:00.147Z,1510158180.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:00.527Z,1510158180.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:00.551Z,1510158180.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:00.920Z,1510158180.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:00.945Z,1510158180.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:01.329Z,1510158181.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:01.345Z,1510158181.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:01.739Z,1510158181.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:01.762Z,1510158181.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:02.140Z,1510158182.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:02.156Z,1510158182.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:02.539Z,1510158182.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:02.556Z,1510158182.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:02.927Z,1510158182.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:02.948Z,1510158182.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:03.330Z,1510158183.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:03.346Z,1510158183.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:03.720Z,1510158183.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:03.751Z,1510158183.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:04.127Z,1510158184.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:04.148Z,1510158184.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:04.543Z,1510158184.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:04.559Z,1510158184.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:04.939Z,1510158184.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:04.956Z,1510158184.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:05.339Z,1510158185.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:05.355Z,1510158185.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:05.730Z,1510158185.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:05.769Z,1510158185.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:06.129Z,1510158186.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:06.145Z,1510158186.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:06.527Z,1510158186.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:06.549Z,1510158186.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:06.920Z,1510158186.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:06.951Z,1510158186.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:07.319Z,1510158187.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:07.353Z,1510158187.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:07.739Z,1510158187.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:07.760Z,1510158187.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:08.142Z,1510158188.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:08.158Z,1510158188.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:08.540Z,1510158188.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:08.556Z,1510158188.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:08.927Z,1510158188.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:08.948Z,1510158188.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:09.330Z,1510158189.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:09.346Z,1510158189.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:09.728Z,1510158189.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:09.744Z,1510158189.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:10.129Z,1510158190.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:10.151Z,1510158190.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:10.543Z,1510158190.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:10.563Z,1510158190.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:10.942Z,1510158190.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:10.963Z,1510158190.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:11.340Z,1510158191.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:11.356Z,1510158191.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:11.719Z,1510158191.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:11.750Z,1510158191.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:12.119Z,1510158192.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:12.153Z,1510158192.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:12.527Z,1510158192.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:12.549Z,1510158192.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:12.920Z,1510158192.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:12.947Z,1510158192.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:13.319Z,1510158193.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:13.353Z,1510158193.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:13.739Z,1510158193.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:13.756Z,1510158193.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:14.140Z,1510158194.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:14.159Z,1510158194.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:14.539Z,1510158194.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:14.556Z,1510158194.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:14.927Z,1510158194.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:14.949Z,1510158194.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:15.319Z,1510158195.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:15.354Z,1510158195.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:15.730Z,1510158195.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:15.751Z,1510158195.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:16.127Z,1510158196.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:16.149Z,1510158196.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:16.539Z,1510158196.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:16.555Z,1510158196.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:16.942Z,1510158196.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:16.959Z,1510158196.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:17.339Z,1510158197.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:17.363Z,1510158197.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:17.719Z,1510158197.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:17.797Z,1510158197.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:18.119Z,1510158198.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:18.154Z,1510158198.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:18.523Z,1510158198.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:18.586Z,1510158198.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:18.920Z,1510158198.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:18.951Z,1510158198.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:19.323Z,1510158199.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:19.391Z,1510158199.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:19.740Z,1510158199.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:19.756Z,1510158199.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:20.141Z,1510158200.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:20.156Z,1510158200.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:20.544Z,1510158200.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:20.560Z,1510158200.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:20.923Z,1510158200.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:20.957Z,1510158200.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:21.319Z,1510158201.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:21.352Z,1510158201.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:21.724Z,1510158201.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:21.752Z,1510158201.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:22.123Z,1510158202.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:22.155Z,1510158202.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:22.539Z,1510158202.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:22.555Z,1510158202.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:22.943Z,1510158202.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:22.967Z,1510158202.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:23.340Z,1510158203.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:23.356Z,1510158203.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:23.719Z,1510158203.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:23.752Z,1510158203.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:24.123Z,1510158204.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:24.155Z,1510158204.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:24.523Z,1510158204.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:24.558Z,1510158204.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:24.920Z,1510158204.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:24.951Z,1510158204.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:25.323Z,1510158205.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:25.359Z,1510158205.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:25.739Z,1510158205.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:25.756Z,1510158205.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:26.140Z,1510158206.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:26.155Z,1510158206.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:26.543Z,1510158206.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:26.560Z,1510158206.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:26.923Z,1510158206.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:26.954Z,1510158206.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:27.319Z,1510158207.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:27.351Z,1510158207.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:27.724Z,1510158207.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:27.791Z,1510158207.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:28.123Z,1510158208.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:28.157Z,1510158208.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:28.539Z,1510158208.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:28.555Z,1510158208.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:28.943Z,1510158208.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:28.964Z,1510158208.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:29.340Z,1510158209.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:29.356Z,1510158209.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:29.719Z,1510158209.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:29.752Z,1510158209.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:30.123Z,1510158210.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:30.156Z,1510158210.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:30.523Z,1510158210.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:30.555Z,1510158210.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:30.920Z,1510158210.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:30.954Z,1510158210.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:31.323Z,1510158211.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:31.355Z,1510158211.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:31.739Z,1510158211.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:31.755Z,1510158211.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:32.140Z,1510158212.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:32.163Z,1510158212.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:32.544Z,1510158212.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:32.560Z,1510158212.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:32.923Z,1510158212.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:32.957Z,1510158212.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:33.323Z,1510158213.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:33.349Z,1510158213.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:33.724Z,1510158213.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:33.750Z,1510158213.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:34.123Z,1510158214.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:34.149Z,1510158214.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:34.550Z,1510158214.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:34.566Z,1510158214.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:34.945Z,1510158214.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:34.962Z,1510158214.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:35.349Z,1510158215.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:35.365Z,1510158215.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:35.721Z,1510158215.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:35.757Z,1510158215.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:36.121Z,1510158216.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:36.161Z,1510158216.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:36.524Z,1510158216.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:36.557Z,1510158216.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:36.926Z,1510158216.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:36.954Z,1510158216.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:37.324Z,1510158217.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:37.354Z,1510158217.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:37.747Z,1510158217.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:37.768Z,1510158217.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:38.148Z,1510158218.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:38.165Z,1510158218.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:41.243Z,1510158221.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:41.327Z,1510158221.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:41.454Z,1510158221.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:41.470Z,1510158221.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:41.850Z,1510158221.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:41.866Z,1510158221.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:42.250Z,1510158222.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:42.267Z,1510158222.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:42.646Z,1510158222.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:42.705Z,1510158222.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:43.046Z,1510158223.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:43.062Z,1510158223.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:43.459Z,1510158223.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:43.515Z,1510158223.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:43.856Z,1510158223.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:43.872Z,1510158223.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:44.259Z,1510158224.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:44.275Z,1510158224.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:44.646Z,1510158224.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:44.667Z,1510158224.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:45.043Z,1510158225.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:45.065Z,1510158225.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:45.435Z,1510158225.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:45.462Z,1510158225.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:45.851Z,1510158225.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:45.868Z,1510158225.868 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:45.868Z,1510158225.868 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60
2017-11-08T16:23:45.868Z,1510158225.868 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T16:23:45.870Z,1510158225.870 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:45.870Z,1510158225.870 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60
2017-11-08T16:23:45.870Z,1510158225.870 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T16:23:45.871Z,1510158225.871 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:45.872Z,1510158225.872 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 60
2017-11-08T16:23:45.872Z,1510158225.872 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T16:23:45.945Z,1510158225.945 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T16:23:45.945Z,1510158225.945 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T16:23:45.945Z,1510158225.945 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T16:23:46.254Z,1510158226.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:46.345Z,1510158226.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T16:23:46.345Z,1510158226.345 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60
2017-11-08T16:23:46.345Z,1510158226.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T16:23:46.345Z,1510158226.345 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60
2017-11-08T16:23:46.346Z,1510158226.346 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T16:23:46.346Z,1510158226.346 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 60
2017-11-08T16:23:46.661Z,1510158226.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:46.676Z,1510158226.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T16:23:46.676Z,1510158226.676 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:23:46.677Z,1510158226.677 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:23:46.677Z,1510158226.677 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T16:23:46.678Z,1510158226.678 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:23:46.678Z,1510158226.678 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:23:46.678Z,1510158226.678 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T16:23:46.679Z,1510158226.679 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:23:46.679Z,1510158226.679 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:23:47.054Z,1510158227.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:47.075Z,1510158227.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T16:23:47.076Z,1510158227.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:47.461Z,1510158227.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:47.477Z,1510158227.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T16:23:47.478Z,1510158227.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:47.836Z,1510158227.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:47.868Z,1510158227.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T16:23:47.869Z,1510158227.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:48.236Z,1510158228.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:48.274Z,1510158228.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T16:23:48.275Z,1510158228.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:48.641Z,1510158228.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:48.693Z,1510158228.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T16:23:48.694Z,1510158228.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:49.035Z,1510158229.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:49.077Z,1510158229.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T16:23:49.078Z,1510158229.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:49.451Z,1510158229.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:49.483Z,1510158229.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T16:23:49.484Z,1510158229.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:49.855Z,1510158229.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:49.887Z,1510158229.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T16:23:49.888Z,1510158229.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:50.250Z,1510158230.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:50.279Z,1510158230.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T16:23:50.280Z,1510158230.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:50.635Z,1510158230.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:50.656Z,1510158230.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T16:23:50.673Z,1510158230.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:51.039Z,1510158231.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:51.060Z,1510158231.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T16:23:51.077Z,1510158231.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:51.443Z,1510158231.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:51.458Z,1510158231.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T16:23:51.459Z,1510158231.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:51.843Z,1510158231.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:51.898Z,1510158231.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T16:23:51.899Z,1510158231.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:52.242Z,1510158232.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:52.258Z,1510158232.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T16:23:52.259Z,1510158232.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:52.653Z,1510158232.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:52.681Z,1510158232.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T16:23:52.682Z,1510158232.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:53.054Z,1510158233.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:53.070Z,1510158233.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T16:23:53.071Z,1510158233.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:53.450Z,1510158233.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:53.466Z,1510158233.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T16:23:53.467Z,1510158233.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:53.842Z,1510158233.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:53.859Z,1510158233.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T16:23:53.860Z,1510158233.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:54.245Z,1510158234.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:54.261Z,1510158234.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T16:23:54.262Z,1510158234.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:54.644Z,1510158234.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:54.661Z,1510158234.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T16:23:54.662Z,1510158234.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:55.044Z,1510158235.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:55.060Z,1510158235.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T16:23:55.061Z,1510158235.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:55.450Z,1510158235.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:55.466Z,1510158235.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T16:23:55.467Z,1510158235.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:55.854Z,1510158235.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:55.870Z,1510158235.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T16:23:55.871Z,1510158235.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:56.252Z,1510158236.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:56.268Z,1510158236.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T16:23:56.269Z,1510158236.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:56.644Z,1510158236.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:56.667Z,1510158236.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T16:23:56.668Z,1510158236.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:57.043Z,1510158237.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:57.113Z,1510158237.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T16:23:57.114Z,1510158237.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:57.444Z,1510158237.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:57.460Z,1510158237.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T16:23:57.461Z,1510158237.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:57.842Z,1510158237.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:57.858Z,1510158237.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T16:23:57.859Z,1510158237.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:58.246Z,1510158238.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:58.262Z,1510158238.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T16:23:58.263Z,1510158238.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:58.654Z,1510158238.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:58.670Z,1510158238.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T16:23:58.671Z,1510158238.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:59.054Z,1510158239.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:59.070Z,1510158239.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T16:23:59.071Z,1510158239.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:59.450Z,1510158239.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:59.466Z,1510158239.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T16:23:59.467Z,1510158239.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:23:59.844Z,1510158239.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:23:59.863Z,1510158239.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T16:23:59.864Z,1510158239.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:00.239Z,1510158240.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:00.259Z,1510158240.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T16:24:00.261Z,1510158240.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:00.644Z,1510158240.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:00.661Z,1510158240.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T16:24:00.662Z,1510158240.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:01.058Z,1510158241.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:01.095Z,1510158241.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T16:24:01.096Z,1510158241.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:01.452Z,1510158241.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:01.469Z,1510158241.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T16:24:01.470Z,1510158241.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:01.855Z,1510158241.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:01.880Z,1510158241.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T16:24:01.881Z,1510158241.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:02.261Z,1510158242.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:02.279Z,1510158242.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T16:24:02.280Z,1510158242.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:02.637Z,1510158242.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:02.671Z,1510158242.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T16:24:02.672Z,1510158242.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:03.070Z,1510158243.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:03.086Z,1510158243.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T16:24:03.087Z,1510158243.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:03.435Z,1510158243.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:03.451Z,1510158243.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T16:24:03.451Z,1510158243.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:03.840Z,1510158243.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:03.877Z,1510158243.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T16:24:03.878Z,1510158243.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:04.239Z,1510158244.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:04.285Z,1510158244.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T16:24:04.286Z,1510158244.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:04.649Z,1510158244.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:04.677Z,1510158244.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T16:24:04.678Z,1510158244.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:05.057Z,1510158245.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:05.111Z,1510158245.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T16:24:05.112Z,1510158245.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:05.455Z,1510158245.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:05.479Z,1510158245.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T16:24:05.480Z,1510158245.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:05.838Z,1510158245.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:05.893Z,1510158245.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:06.243Z,1510158246.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:06.260Z,1510158246.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:06.644Z,1510158246.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:06.660Z,1510158246.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:07.043Z,1510158247.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:07.059Z,1510158247.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:07.454Z,1510158247.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:07.485Z,1510158247.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:07.853Z,1510158247.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:07.884Z,1510158247.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:08.257Z,1510158248.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:08.283Z,1510158248.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:08.636Z,1510158248.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:08.669Z,1510158248.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:09.043Z,1510158249.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:09.063Z,1510158249.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:09.445Z,1510158249.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:09.461Z,1510158249.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:09.842Z,1510158249.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:09.858Z,1510158249.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:10.248Z,1510158250.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:10.264Z,1510158250.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:10.653Z,1510158250.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:10.669Z,1510158250.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:11.054Z,1510158251.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:11.070Z,1510158251.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:11.459Z,1510158251.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:11.476Z,1510158251.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:11.854Z,1510158251.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:11.869Z,1510158251.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:12.238Z,1510158252.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:12.269Z,1510158252.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:12.650Z,1510158252.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:12.676Z,1510158252.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:13.046Z,1510158253.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:13.062Z,1510158253.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:13.455Z,1510158253.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:13.476Z,1510158253.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:13.855Z,1510158253.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:13.877Z,1510158253.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:14.255Z,1510158254.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:14.327Z,1510158254.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:14.638Z,1510158254.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:14.662Z,1510158254.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:15.040Z,1510158255.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:15.073Z,1510158255.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:15.446Z,1510158255.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:15.462Z,1510158255.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:15.846Z,1510158255.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:15.862Z,1510158255.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:16.245Z,1510158256.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:16.261Z,1510158256.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:16.656Z,1510158256.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:16.672Z,1510158256.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:17.060Z,1510158257.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:17.084Z,1510158257.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:17.464Z,1510158257.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:17.480Z,1510158257.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:17.865Z,1510158257.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:17.881Z,1510158257.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:18.235Z,1510158258.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:18.261Z,1510158258.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:18.652Z,1510158258.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:18.671Z,1510158258.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:19.048Z,1510158259.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:19.064Z,1510158259.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:19.455Z,1510158259.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:19.472Z,1510158259.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:19.858Z,1510158259.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:19.875Z,1510158259.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:20.263Z,1510158260.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:20.279Z,1510158260.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:20.638Z,1510158260.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:20.679Z,1510158260.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:21.040Z,1510158261.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:21.082Z,1510158261.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:21.438Z,1510158261.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:21.472Z,1510158261.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:21.840Z,1510158261.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:21.868Z,1510158261.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:22.239Z,1510158262.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:22.265Z,1510158262.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:22.666Z,1510158262.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:22.683Z,1510158262.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:23.060Z,1510158263.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:23.084Z,1510158263.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:23.450Z,1510158263.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:23.475Z,1510158263.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:23.845Z,1510158263.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:23.861Z,1510158263.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:24.247Z,1510158264.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:24.267Z,1510158264.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:24.647Z,1510158264.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:24.664Z,1510158264.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:25.043Z,1510158265.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:25.093Z,1510158265.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:25.450Z,1510158265.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:25.467Z,1510158265.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:25.854Z,1510158265.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:25.870Z,1510158265.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:26.258Z,1510158266.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:26.324Z,1510158266.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:26.657Z,1510158266.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:26.674Z,1510158266.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:27.061Z,1510158267.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:27.078Z,1510158267.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:27.440Z,1510158267.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:27.492Z,1510158267.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:27.843Z,1510158267.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:27.883Z,1510158267.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:28.242Z,1510158268.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:28.295Z,1510158268.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:28.667Z,1510158268.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:28.683Z,1510158268.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:29.054Z,1510158269.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:29.086Z,1510158269.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:29.450Z,1510158269.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:29.489Z,1510158269.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:29.847Z,1510158269.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:29.897Z,1510158269.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:30.251Z,1510158270.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:30.291Z,1510158270.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:30.642Z,1510158270.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:30.662Z,1510158270.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:31.053Z,1510158271.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:31.087Z,1510158271.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:31.460Z,1510158271.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:31.494Z,1510158271.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:31.861Z,1510158271.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:31.913Z,1510158271.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:32.255Z,1510158272.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:32.271Z,1510158272.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:32.638Z,1510158272.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:32.660Z,1510158272.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:33.044Z,1510158273.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:33.063Z,1510158273.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:33.450Z,1510158273.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:33.467Z,1510158273.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:33.845Z,1510158273.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:33.869Z,1510158273.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:34.245Z,1510158274.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:34.261Z,1510158274.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:34.659Z,1510158274.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:34.675Z,1510158274.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:35.068Z,1510158275.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:35.084Z,1510158275.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:35.458Z,1510158275.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:35.479Z,1510158275.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:35.835Z,1510158275.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:35.869Z,1510158275.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:36.246Z,1510158276.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:36.266Z,1510158276.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:36.646Z,1510158276.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:36.705Z,1510158276.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:37.046Z,1510158277.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:37.062Z,1510158277.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:37.461Z,1510158277.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:37.477Z,1510158277.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:37.858Z,1510158277.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:37.879Z,1510158277.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:38.260Z,1510158278.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:38.283Z,1510158278.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:38.652Z,1510158278.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:38.668Z,1510158278.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:41.925Z,1510158281.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:41.964Z,1510158281.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:42.085Z,1510158282.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:42.120Z,1510158282.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:42.517Z,1510158282.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:42.534Z,1510158282.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:42.912Z,1510158282.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:42.929Z,1510158282.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:43.316Z,1510158283.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:43.340Z,1510158283.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:43.692Z,1510158283.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:43.726Z,1510158283.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:44.087Z,1510158284.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:44.117Z,1510158284.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:44.495Z,1510158284.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:44.532Z,1510158284.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:44.896Z,1510158284.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:44.913Z,1510158284.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:45.290Z,1510158285.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:45.314Z,1510158285.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:45.707Z,1510158285.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:45.724Z,1510158285.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:46.122Z,1510158286.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:46.154Z,1510158286.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:46.513Z,1510158286.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:46.530Z,1510158286.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:46.891Z,1510158286.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:46.917Z,1510158286.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:47.295Z,1510158287.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:47.368Z,1510158287.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:47.689Z,1510158287.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:47.705Z,1510158287.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:48.087Z,1510158288.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:48.107Z,1510158288.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:48.506Z,1510158288.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:48.532Z,1510158288.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:48.909Z,1510158288.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:48.983Z,1510158288.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:49.306Z,1510158289.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:49.335Z,1510158289.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:49.692Z,1510158289.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:49.710Z,1510158289.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:50.096Z,1510158290.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:50.151Z,1510158290.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:50.495Z,1510158290.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:50.533Z,1510158290.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:50.894Z,1510158290.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:50.944Z,1510158290.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:51.295Z,1510158291.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:51.312Z,1510158291.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:51.702Z,1510158291.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:51.737Z,1510158291.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:52.106Z,1510158292.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:52.124Z,1510158292.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:52.515Z,1510158292.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:52.558Z,1510158292.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:52.894Z,1510158292.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:52.912Z,1510158292.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:53.298Z,1510158293.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:53.321Z,1510158293.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:53.704Z,1510158293.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:53.721Z,1510158293.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:54.091Z,1510158294.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:54.116Z,1510158294.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:54.508Z,1510158294.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:54.525Z,1510158294.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:54.911Z,1510158294.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:54.927Z,1510158294.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:55.308Z,1510158295.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:55.332Z,1510158295.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:55.695Z,1510158295.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:55.716Z,1510158295.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:56.098Z,1510158296.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:56.114Z,1510158296.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:56.487Z,1510158296.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:56.522Z,1510158296.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:56.892Z,1510158296.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:56.920Z,1510158296.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:57.287Z,1510158297.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:57.312Z,1510158297.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:57.707Z,1510158297.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:57.724Z,1510158297.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:58.115Z,1510158298.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:58.135Z,1510158298.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:58.507Z,1510158298.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:58.523Z,1510158298.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:58.887Z,1510158298.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:58.919Z,1510158298.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:59.291Z,1510158299.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:59.355Z,1510158299.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:24:59.692Z,1510158299.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:24:59.717Z,1510158299.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:00.087Z,1510158300.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:00.118Z,1510158300.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:00.512Z,1510158300.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:00.528Z,1510158300.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:00.912Z,1510158300.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:00.928Z,1510158300.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:01.308Z,1510158301.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:01.324Z,1510158301.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:01.687Z,1510158301.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:01.717Z,1510158301.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:02.091Z,1510158302.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:02.116Z,1510158302.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:02.487Z,1510158302.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:02.516Z,1510158302.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:02.892Z,1510158302.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:02.925Z,1510158302.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:03.291Z,1510158303.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:03.322Z,1510158303.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:03.706Z,1510158303.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:03.727Z,1510158303.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:04.111Z,1510158304.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:04.127Z,1510158304.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:04.509Z,1510158304.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:04.526Z,1510158304.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:04.887Z,1510158304.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:04.922Z,1510158304.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:05.291Z,1510158305.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:05.321Z,1510158305.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:05.692Z,1510158305.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:05.727Z,1510158305.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:06.091Z,1510158306.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:06.121Z,1510158306.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:06.508Z,1510158306.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:06.524Z,1510158306.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:06.912Z,1510158306.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:06.928Z,1510158306.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:07.308Z,1510158307.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:07.324Z,1510158307.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:07.691Z,1510158307.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:07.722Z,1510158307.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:08.091Z,1510158308.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:08.122Z,1510158308.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:08.491Z,1510158308.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:08.521Z,1510158308.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:08.896Z,1510158308.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:08.928Z,1510158308.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:09.287Z,1510158309.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:09.359Z,1510158309.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:09.708Z,1510158309.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:09.724Z,1510158309.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:10.111Z,1510158310.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:10.127Z,1510158310.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:10.512Z,1510158310.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:10.531Z,1510158310.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:10.891Z,1510158310.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:10.921Z,1510158310.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:11.291Z,1510158311.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:11.347Z,1510158311.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:11.692Z,1510158311.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:11.722Z,1510158311.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:12.092Z,1510158312.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:12.122Z,1510158312.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:12.511Z,1510158312.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:12.569Z,1510158312.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:12.911Z,1510158312.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:12.927Z,1510158312.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:13.312Z,1510158313.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:13.370Z,1510158313.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:13.691Z,1510158313.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:13.722Z,1510158313.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:14.091Z,1510158314.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:14.122Z,1510158314.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:14.491Z,1510158314.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:14.521Z,1510158314.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:14.892Z,1510158314.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:14.922Z,1510158314.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:15.287Z,1510158315.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:15.324Z,1510158315.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:15.711Z,1510158315.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:15.727Z,1510158315.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:16.110Z,1510158316.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:16.126Z,1510158316.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:16.509Z,1510158316.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:16.525Z,1510158316.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:16.891Z,1510158316.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:16.922Z,1510158316.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:17.291Z,1510158317.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:17.321Z,1510158317.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:17.688Z,1510158317.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:17.724Z,1510158317.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:18.091Z,1510158318.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:18.121Z,1510158318.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:18.508Z,1510158318.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:18.524Z,1510158318.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:18.909Z,1510158318.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:18.924Z,1510158318.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:19.311Z,1510158319.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:19.327Z,1510158319.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:19.691Z,1510158319.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:19.720Z,1510158319.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:20.091Z,1510158320.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:20.128Z,1510158320.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:20.491Z,1510158320.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:20.525Z,1510158320.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:20.892Z,1510158320.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:20.931Z,1510158320.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:21.291Z,1510158321.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:21.329Z,1510158321.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:21.712Z,1510158321.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:21.768Z,1510158321.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:22.112Z,1510158322.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:22.128Z,1510158322.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:22.513Z,1510158322.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:22.529Z,1510158322.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:22.891Z,1510158322.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:22.924Z,1510158322.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:23.291Z,1510158323.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:23.332Z,1510158323.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:23.688Z,1510158323.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:23.732Z,1510158323.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:24.091Z,1510158324.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:24.128Z,1510158324.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:24.501Z,1510158324.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:24.534Z,1510158324.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:24.905Z,1510158324.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:24.931Z,1510158324.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:25.310Z,1510158325.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:25.339Z,1510158325.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:25.692Z,1510158325.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:25.708Z,1510158325.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:26.092Z,1510158326.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:26.107Z,1510158326.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:26.495Z,1510158326.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:26.512Z,1510158326.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:26.893Z,1510158326.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:26.932Z,1510158326.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:27.296Z,1510158327.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:27.312Z,1510158327.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:27.702Z,1510158327.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:27.735Z,1510158327.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:28.110Z,1510158328.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:28.141Z,1510158328.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:28.510Z,1510158328.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:28.548Z,1510158328.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:28.895Z,1510158328.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:28.920Z,1510158328.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:29.295Z,1510158329.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:29.316Z,1510158329.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:29.693Z,1510158329.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:29.720Z,1510158329.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:30.095Z,1510158330.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:30.112Z,1510158330.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:30.506Z,1510158330.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:30.544Z,1510158330.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:30.906Z,1510158330.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:30.923Z,1510158330.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:31.303Z,1510158331.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:31.320Z,1510158331.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:31.696Z,1510158331.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:31.713Z,1510158331.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:32.098Z,1510158332.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:32.115Z,1510158332.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:32.493Z,1510158332.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:32.560Z,1510158332.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:32.898Z,1510158332.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:32.915Z,1510158332.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:33.298Z,1510158333.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:33.314Z,1510158333.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:33.393Z,1510158333.393 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:25:33.393Z,1510158333.393 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T16:25:33.625Z,1510158333.625 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:25:33.625Z,1510158333.625 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:25:33.625Z,1510158333.625 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:25:33.625Z,1510158333.625 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T16:25:33.625Z,1510158333.625 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:25:33.702Z,1510158333.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:33.774Z,1510158333.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:33.861Z,1510158333.861 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:25:34.029Z,1510158334.029 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:25:34.107Z,1510158334.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:34.143Z,1510158334.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:34.237Z,1510158334.237 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:25:34.512Z,1510158334.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:34.528Z,1510158334.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:34.891Z,1510158334.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:34.959Z,1510158334.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:35.291Z,1510158335.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:35.324Z,1510158335.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:35.692Z,1510158335.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:35.741Z,1510158335.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:35.832Z,1510158335.832 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:25:35.833Z,1510158335.833 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T16:25:35.857Z,1510158335.857 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:25:35.857Z,1510158335.857 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:25:35.857Z,1510158335.857 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:25:35.858Z,1510158335.858 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T16:25:35.858Z,1510158335.858 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:25:36.091Z,1510158336.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:36.124Z,1510158336.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:36.201Z,1510158336.201 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:25:36.261Z,1510158336.261 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:25:36.344Z,1510158336.344 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:25:36.515Z,1510158336.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:36.534Z,1510158336.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:36.911Z,1510158336.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:36.927Z,1510158336.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:37.312Z,1510158337.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:37.329Z,1510158337.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:37.695Z,1510158337.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:37.732Z,1510158337.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:37.817Z,1510158337.817 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:25:37.817Z,1510158337.817 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T16:25:37.961Z,1510158337.961 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:25:37.961Z,1510158337.961 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:25:37.962Z,1510158337.962 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:25:37.962Z,1510158337.962 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T16:25:37.962Z,1510158337.962 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:25:38.091Z,1510158338.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:38.125Z,1510158338.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:38.205Z,1510158338.205 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:25:38.365Z,1510158338.365 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:25:38.451Z,1510158338.451 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:25:38.492Z,1510158338.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:38.525Z,1510158338.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:41.589Z,1510158341.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:41.615Z,1510158341.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:41.701Z,1510158341.701 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:25:41.701Z,1510158341.701 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T16:25:41.727Z,1510158341.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:41.744Z,1510158341.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:42.085Z,1510158342.085 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:25:42.085Z,1510158342.085 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:25:42.085Z,1510158342.085 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:25:42.085Z,1510158342.085 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T16:25:42.085Z,1510158342.085 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:25:42.156Z,1510158342.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:42.174Z,1510158342.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:42.253Z,1510158342.253 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:25:42.489Z,1510158342.489 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:25:42.551Z,1510158342.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:42.594Z,1510158342.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:42.699Z,1510158342.699 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:25:42.946Z,1510158342.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:42.968Z,1510158342.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:43.335Z,1510158343.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:43.356Z,1510158343.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:43.738Z,1510158343.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:43.793Z,1510158343.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:44.137Z,1510158344.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:44.154Z,1510158344.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:44.233Z,1510158344.233 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:25:44.233Z,1510158344.233 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T16:25:44.313Z,1510158344.313 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:25:44.313Z,1510158344.313 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:25:44.313Z,1510158344.313 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:25:44.313Z,1510158344.313 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T16:25:44.314Z,1510158344.314 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:25:44.546Z,1510158344.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:44.563Z,1510158344.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:44.641Z,1510158344.641 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:25:44.641Z,1510158344.641 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:25:44.717Z,1510158344.717 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:25:44.804Z,1510158344.804 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:25:44.950Z,1510158344.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:44.970Z,1510158344.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:45.346Z,1510158345.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:45.368Z,1510158345.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:45.735Z,1510158345.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:45.757Z,1510158345.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:46.138Z,1510158346.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:46.154Z,1510158346.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:46.534Z,1510158346.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:46.550Z,1510158346.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:46.938Z,1510158346.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:46.954Z,1510158346.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:47.338Z,1510158347.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:47.354Z,1510158347.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:47.746Z,1510158347.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:47.768Z,1510158347.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:48.146Z,1510158348.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:48.162Z,1510158348.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:48.547Z,1510158348.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:48.568Z,1510158348.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:48.937Z,1510158348.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:49.011Z,1510158349.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:49.335Z,1510158349.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:49.356Z,1510158349.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:49.737Z,1510158349.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:49.764Z,1510158349.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:50.137Z,1510158350.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:50.153Z,1510158350.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:50.546Z,1510158350.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:50.563Z,1510158350.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:50.947Z,1510158350.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:50.967Z,1510158350.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:51.347Z,1510158351.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:51.368Z,1510158351.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:51.737Z,1510158351.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:51.754Z,1510158351.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:52.138Z,1510158352.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:52.154Z,1510158352.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:52.537Z,1510158352.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:52.554Z,1510158352.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:52.938Z,1510158352.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:52.955Z,1510158352.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:53.338Z,1510158353.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:53.354Z,1510158353.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:53.747Z,1510158353.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:53.768Z,1510158353.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:54.146Z,1510158354.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:54.168Z,1510158354.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:54.547Z,1510158354.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:54.611Z,1510158354.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:54.933Z,1510158354.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:54.950Z,1510158354.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:55.342Z,1510158355.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:55.399Z,1510158355.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:55.739Z,1510158355.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:55.755Z,1510158355.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:56.138Z,1510158356.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:56.194Z,1510158356.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:56.546Z,1510158356.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:56.563Z,1510158356.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:56.947Z,1510158356.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:56.968Z,1510158356.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:57.347Z,1510158357.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:57.368Z,1510158357.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:57.735Z,1510158357.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:57.772Z,1510158357.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:58.132Z,1510158358.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:58.161Z,1510158358.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:58.527Z,1510158358.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:58.562Z,1510158358.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:58.932Z,1510158358.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:58.962Z,1510158358.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:59.327Z,1510158359.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:59.363Z,1510158359.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:25:59.748Z,1510158359.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:25:59.765Z,1510158359.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:00.150Z,1510158360.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:00.167Z,1510158360.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:00.552Z,1510158360.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:00.569Z,1510158360.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:00.927Z,1510158360.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:00.962Z,1510158360.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:01.331Z,1510158361.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:01.362Z,1510158361.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:01.732Z,1510158361.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:01.762Z,1510158361.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:02.131Z,1510158362.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:02.162Z,1510158362.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:02.551Z,1510158362.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:02.568Z,1510158362.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:02.946Z,1510158362.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:02.969Z,1510158362.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:03.348Z,1510158363.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:03.365Z,1510158363.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:03.731Z,1510158363.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:03.764Z,1510158363.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:04.131Z,1510158364.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:04.164Z,1510158364.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:04.535Z,1510158364.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:04.584Z,1510158364.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:04.932Z,1510158364.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:04.948Z,1510158364.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:05.332Z,1510158365.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:05.348Z,1510158365.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:05.746Z,1510158365.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:05.778Z,1510158365.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:06.149Z,1510158366.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:06.176Z,1510158366.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:06.546Z,1510158366.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:06.578Z,1510158366.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:06.935Z,1510158366.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:06.955Z,1510158366.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:07.336Z,1510158367.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:07.352Z,1510158367.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:07.736Z,1510158367.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:07.753Z,1510158367.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:08.132Z,1510158368.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:08.153Z,1510158368.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:08.542Z,1510158368.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:08.558Z,1510158368.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:08.949Z,1510158368.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:08.978Z,1510158368.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:09.342Z,1510158369.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:09.359Z,1510158369.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:09.739Z,1510158369.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:09.755Z,1510158369.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:10.139Z,1510158370.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:10.155Z,1510158370.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:10.535Z,1510158370.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:10.559Z,1510158370.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:10.939Z,1510158370.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:10.956Z,1510158370.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:11.335Z,1510158371.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:11.353Z,1510158371.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:11.742Z,1510158371.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:11.760Z,1510158371.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:12.146Z,1510158372.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:12.164Z,1510158372.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:12.542Z,1510158372.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:12.560Z,1510158372.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:12.931Z,1510158372.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:12.961Z,1510158372.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:13.335Z,1510158373.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:13.366Z,1510158373.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:13.738Z,1510158373.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:13.755Z,1510158373.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:14.137Z,1510158374.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:14.159Z,1510158374.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:14.546Z,1510158374.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:14.564Z,1510158374.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:14.947Z,1510158374.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:15.011Z,1510158375.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:15.346Z,1510158375.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:15.363Z,1510158375.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:15.735Z,1510158375.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:15.795Z,1510158375.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:16.138Z,1510158376.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:16.154Z,1510158376.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:16.527Z,1510158376.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:16.591Z,1510158376.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:16.935Z,1510158376.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:16.957Z,1510158376.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:17.338Z,1510158377.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:17.378Z,1510158377.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:17.747Z,1510158377.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:17.764Z,1510158377.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:18.152Z,1510158378.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:18.168Z,1510158378.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:18.547Z,1510158378.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:18.563Z,1510158378.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:18.927Z,1510158378.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:18.959Z,1510158378.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:19.331Z,1510158379.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:19.356Z,1510158379.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:19.732Z,1510158379.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:19.757Z,1510158379.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:20.127Z,1510158380.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:20.159Z,1510158380.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:20.546Z,1510158380.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:20.566Z,1510158380.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:20.948Z,1510158380.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:20.964Z,1510158380.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:21.347Z,1510158381.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:21.363Z,1510158381.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:21.731Z,1510158381.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:21.764Z,1510158381.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:22.131Z,1510158382.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:22.162Z,1510158382.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:22.527Z,1510158382.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:22.561Z,1510158382.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:22.932Z,1510158382.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:22.962Z,1510158382.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:23.327Z,1510158383.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:23.364Z,1510158383.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:23.748Z,1510158383.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:23.765Z,1510158383.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:24.151Z,1510158384.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:24.167Z,1510158384.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:24.549Z,1510158384.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:24.564Z,1510158384.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:24.931Z,1510158384.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:24.962Z,1510158384.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:25.331Z,1510158385.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:25.361Z,1510158385.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:25.728Z,1510158385.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:25.774Z,1510158385.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:26.127Z,1510158386.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:26.162Z,1510158386.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:26.548Z,1510158386.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:26.564Z,1510158386.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:26.949Z,1510158386.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:26.965Z,1510158386.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:27.348Z,1510158387.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:27.364Z,1510158387.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:27.731Z,1510158387.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:27.761Z,1510158387.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:28.131Z,1510158388.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:28.162Z,1510158388.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:28.531Z,1510158388.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:28.562Z,1510158388.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:28.932Z,1510158388.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:28.962Z,1510158388.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:29.331Z,1510158389.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:29.362Z,1510158389.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:29.748Z,1510158389.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:29.764Z,1510158389.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:30.150Z,1510158390.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:30.166Z,1510158390.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:30.549Z,1510158390.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:30.564Z,1510158390.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:30.931Z,1510158390.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:30.962Z,1510158390.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:31.331Z,1510158391.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:31.362Z,1510158391.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:31.732Z,1510158391.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:31.762Z,1510158391.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:32.131Z,1510158392.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:32.162Z,1510158392.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:32.548Z,1510158392.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:32.564Z,1510158392.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:32.952Z,1510158392.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:32.976Z,1510158392.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:33.352Z,1510158393.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:33.368Z,1510158393.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:33.731Z,1510158393.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:33.769Z,1510158393.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:34.127Z,1510158394.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:34.152Z,1510158394.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:34.532Z,1510158394.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:34.564Z,1510158394.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:34.932Z,1510158394.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:34.965Z,1510158394.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:35.331Z,1510158395.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:35.347Z,1510158395.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:35.746Z,1510158395.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:35.771Z,1510158395.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:36.146Z,1510158396.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:36.172Z,1510158396.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:36.545Z,1510158396.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:36.592Z,1510158396.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:36.931Z,1510158396.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:36.948Z,1510158396.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:37.331Z,1510158397.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:37.348Z,1510158397.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:37.730Z,1510158397.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:37.797Z,1510158397.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:38.133Z,1510158398.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:38.150Z,1510158398.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:38.546Z,1510158398.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:38.600Z,1510158398.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:41.625Z,1510158401.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:41.643Z,1510158401.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:41.798Z,1510158401.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:41.851Z,1510158401.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:42.179Z,1510158402.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:42.195Z,1510158402.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:42.579Z,1510158402.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:42.594Z,1510158402.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:42.979Z,1510158402.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:42.995Z,1510158402.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:43.390Z,1510158403.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:43.422Z,1510158403.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:43.789Z,1510158403.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:43.805Z,1510158403.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:44.190Z,1510158404.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:44.206Z,1510158404.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:44.580Z,1510158404.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:44.596Z,1510158404.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:44.978Z,1510158404.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:44.999Z,1510158404.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:45.390Z,1510158405.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:45.406Z,1510158405.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:45.790Z,1510158405.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:45.806Z,1510158405.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:46.186Z,1510158406.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:46.202Z,1510158406.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:46.580Z,1510158406.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:46.596Z,1510158406.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:46.979Z,1510158406.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:46.995Z,1510158406.995 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:46.996Z,1510158406.996 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61
2017-11-08T16:26:46.996Z,1510158406.996 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T16:26:46.998Z,1510158406.998 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:46.998Z,1510158406.998 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61
2017-11-08T16:26:46.998Z,1510158406.998 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T16:26:46.999Z,1510158406.999 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:46.000Z,1510158407.000 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 61
2017-11-08T16:26:46.000Z,1510158407.000 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T16:26:47.093Z,1510158407.093 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T16:26:47.093Z,1510158407.093 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T16:26:47.093Z,1510158407.093 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T16:26:47.386Z,1510158407.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:47.497Z,1510158407.497 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T16:26:47.497Z,1510158407.497 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61
2017-11-08T16:26:47.497Z,1510158407.497 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T16:26:47.497Z,1510158407.497 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61
2017-11-08T16:26:47.498Z,1510158407.498 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T16:26:47.498Z,1510158407.498 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 61
2017-11-08T16:26:47.787Z,1510158407.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:47.806Z,1510158407.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T16:26:47.806Z,1510158407.806 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:26:47.806Z,1510158407.806 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:26:47.807Z,1510158407.807 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T16:26:47.807Z,1510158407.807 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:26:47.807Z,1510158407.807 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:26:47.808Z,1510158407.808 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T16:26:47.808Z,1510158407.808 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:26:47.809Z,1510158407.809 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:26:48.186Z,1510158408.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:48.215Z,1510158408.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T16:26:48.216Z,1510158408.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:48.572Z,1510158408.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:48.598Z,1510158408.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T16:26:48.599Z,1510158408.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:48.976Z,1510158408.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:49.007Z,1510158409.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T16:26:49.008Z,1510158409.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:49.390Z,1510158409.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:49.412Z,1510158409.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T16:26:49.413Z,1510158409.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:49.794Z,1510158409.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:49.809Z,1510158409.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T16:26:49.810Z,1510158409.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:50.189Z,1510158410.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:50.247Z,1510158410.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2017-11-08T16:26:50.248Z,1510158410.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:50.589Z,1510158410.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:50.605Z,1510158410.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T16:26:50.606Z,1510158410.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:50.973Z,1510158410.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:51.006Z,1510158411.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T16:26:51.007Z,1510158411.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:51.397Z,1510158411.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:51.413Z,1510158411.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T16:26:51.414Z,1510158411.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:51.797Z,1510158411.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:51.813Z,1510158411.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T16:26:51.814Z,1510158411.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:52.194Z,1510158412.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:52.222Z,1510158412.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T16:26:52.223Z,1510158412.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:52.578Z,1510158412.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:52.611Z,1510158412.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T16:26:52.612Z,1510158412.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:52.976Z,1510158412.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:53.011Z,1510158413.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T16:26:53.012Z,1510158413.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:53.394Z,1510158413.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:53.421Z,1510158413.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T16:26:53.422Z,1510158413.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:53.789Z,1510158413.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:53.823Z,1510158413.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T16:26:53.823Z,1510158413.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:54.199Z,1510158414.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:54.214Z,1510158414.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T16:26:54.215Z,1510158414.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:54.577Z,1510158414.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:54.606Z,1510158414.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T16:26:54.606Z,1510158414.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:54.976Z,1510158414.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:55.003Z,1510158415.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T16:26:55.004Z,1510158415.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:55.393Z,1510158415.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:55.414Z,1510158415.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T16:26:55.415Z,1510158415.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:55.795Z,1510158415.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:55.812Z,1510158415.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T16:26:55.813Z,1510158415.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:56.194Z,1510158416.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:56.211Z,1510158416.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T16:26:56.212Z,1510158416.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:56.576Z,1510158416.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:56.609Z,1510158416.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T16:26:56.610Z,1510158416.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:56.976Z,1510158416.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:57.011Z,1510158417.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T16:26:57.012Z,1510158417.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:57.394Z,1510158417.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:57.415Z,1510158417.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T16:26:57.416Z,1510158417.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:57.795Z,1510158417.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:57.812Z,1510158417.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T16:26:57.813Z,1510158417.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:58.193Z,1510158418.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:58.212Z,1510158418.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T16:26:58.213Z,1510158418.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:58.577Z,1510158418.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:58.606Z,1510158418.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T16:26:58.607Z,1510158418.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:58.978Z,1510158418.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:59.001Z,1510158419.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T16:26:59.002Z,1510158419.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:59.395Z,1510158419.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:59.415Z,1510158419.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T16:26:59.416Z,1510158419.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:26:59.795Z,1510158419.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:26:59.815Z,1510158419.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T16:26:59.816Z,1510158419.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:00.193Z,1510158420.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:00.209Z,1510158420.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T16:27:00.210Z,1510158420.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:00.584Z,1510158420.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:00.599Z,1510158420.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T16:27:00.600Z,1510158420.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:00.972Z,1510158420.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:01.028Z,1510158421.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T16:27:01.033Z,1510158421.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:01.390Z,1510158421.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:01.410Z,1510158421.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T16:27:01.411Z,1510158421.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:01.795Z,1510158421.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:01.815Z,1510158421.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T16:27:01.816Z,1510158421.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:02.193Z,1510158422.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:02.268Z,1510158422.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T16:27:02.270Z,1510158422.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:02.580Z,1510158422.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:02.602Z,1510158422.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T16:27:02.603Z,1510158422.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:02.983Z,1510158422.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:03.036Z,1510158423.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T16:27:03.037Z,1510158423.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:03.395Z,1510158423.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:03.415Z,1510158423.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T16:27:03.416Z,1510158423.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:03.795Z,1510158423.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:03.846Z,1510158423.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T16:27:03.847Z,1510158423.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:04.195Z,1510158424.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:04.219Z,1510158424.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T16:27:04.220Z,1510158424.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:04.580Z,1510158424.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:04.603Z,1510158424.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T16:27:04.604Z,1510158424.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:04.982Z,1510158424.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:04.998Z,1510158424.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T16:27:04.999Z,1510158424.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:05.392Z,1510158425.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:05.408Z,1510158425.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T16:27:05.409Z,1510158425.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:05.789Z,1510158425.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:05.818Z,1510158425.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T16:27:05.819Z,1510158425.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:06.190Z,1510158426.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:06.218Z,1510158426.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T16:27:06.219Z,1510158426.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:06.572Z,1510158426.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:06.598Z,1510158426.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T16:27:06.598Z,1510158426.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:06.976Z,1510158426.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:07.001Z,1510158427.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:07.392Z,1510158427.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:07.409Z,1510158427.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:07.796Z,1510158427.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:07.812Z,1510158427.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:08.193Z,1510158428.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:08.209Z,1510158428.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:08.584Z,1510158428.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:08.600Z,1510158428.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:08.976Z,1510158428.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:09.001Z,1510158429.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:09.386Z,1510158429.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:09.416Z,1510158429.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:09.796Z,1510158429.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:09.812Z,1510158429.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:10.193Z,1510158430.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:10.209Z,1510158430.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:10.584Z,1510158430.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:10.600Z,1510158430.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:10.976Z,1510158430.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:11.001Z,1510158431.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:11.395Z,1510158431.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:11.411Z,1510158431.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:11.790Z,1510158431.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:11.818Z,1510158431.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:12.192Z,1510158432.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:12.251Z,1510158432.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:12.572Z,1510158432.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:12.598Z,1510158432.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:12.976Z,1510158432.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:13.002Z,1510158433.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:13.395Z,1510158433.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:13.412Z,1510158433.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:13.796Z,1510158433.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:13.819Z,1510158433.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:14.193Z,1510158434.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:14.209Z,1510158434.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:14.584Z,1510158434.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:14.601Z,1510158434.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:14.976Z,1510158434.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:15.002Z,1510158435.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:15.386Z,1510158435.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:15.416Z,1510158435.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:15.795Z,1510158435.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:15.812Z,1510158435.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:16.193Z,1510158436.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:16.209Z,1510158436.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:16.573Z,1510158436.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:16.598Z,1510158436.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:16.976Z,1510158436.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:17.002Z,1510158437.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:17.393Z,1510158437.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:17.409Z,1510158437.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:17.789Z,1510158437.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:17.817Z,1510158437.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:18.186Z,1510158438.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:18.228Z,1510158438.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:18.577Z,1510158438.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:18.611Z,1510158438.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:18.976Z,1510158438.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:19.009Z,1510158439.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:19.386Z,1510158439.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:19.412Z,1510158439.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:19.788Z,1510158439.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:19.819Z,1510158439.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:20.186Z,1510158440.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:20.216Z,1510158440.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:20.577Z,1510158440.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:20.609Z,1510158440.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:20.976Z,1510158440.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:21.021Z,1510158441.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:21.386Z,1510158441.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:21.420Z,1510158441.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:21.793Z,1510158441.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:21.820Z,1510158441.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:22.193Z,1510158442.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:22.221Z,1510158442.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:22.580Z,1510158442.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:22.597Z,1510158442.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:22.979Z,1510158442.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:23.043Z,1510158443.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:23.389Z,1510158443.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:23.427Z,1510158443.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:23.790Z,1510158443.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:23.826Z,1510158443.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:24.190Z,1510158444.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:24.236Z,1510158444.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:24.583Z,1510158444.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:24.599Z,1510158444.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:24.983Z,1510158444.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:25.036Z,1510158445.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:25.386Z,1510158445.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:25.403Z,1510158445.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:25.789Z,1510158445.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:25.830Z,1510158445.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:26.186Z,1510158446.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:26.203Z,1510158446.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:26.581Z,1510158446.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:26.601Z,1510158446.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:26.981Z,1510158446.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:26.997Z,1510158446.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:27.383Z,1510158447.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:27.403Z,1510158447.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:27.790Z,1510158447.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:27.806Z,1510158447.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:28.189Z,1510158448.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:28.211Z,1510158448.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:28.580Z,1510158448.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:28.596Z,1510158448.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:28.982Z,1510158448.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:28.998Z,1510158448.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:29.393Z,1510158449.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:29.409Z,1510158449.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:29.786Z,1510158449.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:29.803Z,1510158449.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:30.198Z,1510158450.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:30.230Z,1510158450.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:30.582Z,1510158450.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:30.598Z,1510158450.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:30.975Z,1510158450.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:31.003Z,1510158451.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:31.393Z,1510158451.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:31.410Z,1510158451.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:31.794Z,1510158451.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:31.815Z,1510158451.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:32.195Z,1510158452.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:32.215Z,1510158452.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:32.585Z,1510158452.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:32.601Z,1510158452.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:32.985Z,1510158452.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:33.001Z,1510158453.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:33.395Z,1510158453.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:33.411Z,1510158453.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:33.792Z,1510158453.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:33.809Z,1510158453.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:34.194Z,1510158454.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:34.239Z,1510158454.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:34.583Z,1510158454.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:34.604Z,1510158454.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:34.979Z,1510158454.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:35.003Z,1510158455.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:35.392Z,1510158455.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:35.410Z,1510158455.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:35.791Z,1510158455.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:35.813Z,1510158455.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:36.192Z,1510158456.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:36.209Z,1510158456.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:36.579Z,1510158456.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:36.599Z,1510158456.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:36.982Z,1510158456.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:37.003Z,1510158457.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:37.392Z,1510158457.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:37.408Z,1510158457.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:37.792Z,1510158457.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:37.807Z,1510158457.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:37.810Z,1510158457.810 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T16:27:37.810Z,1510158457.810 [Default:CheckIn:C.Wait] Stopped
2017-11-08T16:27:37.811Z,1510158457.811 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T16:27:37.811Z,1510158457.811 [Default:CheckIn:D] Running Loop=1
2017-11-08T16:27:38.191Z,1510158458.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:38.208Z,1510158458.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:38.211Z,1510158458.211 [Default:CheckIn:D] Stopped
2017-11-08T16:27:38.211Z,1510158458.211 [Default:CheckIn:E] Running Loop=1
2017-11-08T16:27:38.586Z,1510158458.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:38.607Z,1510158458.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:38.611Z,1510158458.611 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 180.953857 min 
2017-11-08T16:27:38.611Z,1510158458.611 [Default:CheckIn:E] Stopped
2017-11-08T16:27:38.611Z,1510158458.611 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T16:27:38.611Z,1510158458.611 [Default:CheckIn] Stopped
2017-11-08T16:27:38.612Z,1510158458.612 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T16:27:38.612Z,1510158458.612 [Default:CheckIn](INFO): Running loop #6
2017-11-08T16:27:38.612Z,1510158458.612 [Default:CheckIn] Running Loop=6
2017-11-08T16:27:38.612Z,1510158458.612 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T16:27:38.612Z,1510158458.612 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T16:27:41.672Z,1510158461.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:41.697Z,1510158461.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:41.844Z,1510158461.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:41.895Z,1510158461.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:42.239Z,1510158462.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:42.255Z,1510158462.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:42.640Z,1510158462.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:42.656Z,1510158462.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:43.011Z,1510158463.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:43.048Z,1510158463.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:43.415Z,1510158463.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:43.452Z,1510158463.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:43.816Z,1510158463.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:43.860Z,1510158463.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:44.215Z,1510158464.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:44.235Z,1510158464.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:44.625Z,1510158464.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:44.662Z,1510158464.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:45.029Z,1510158465.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:45.061Z,1510158465.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:45.430Z,1510158465.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:45.483Z,1510158465.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:45.821Z,1510158465.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:45.894Z,1510158465.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:46.215Z,1510158466.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:46.247Z,1510158466.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:46.622Z,1510158466.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:46.639Z,1510158466.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:47.021Z,1510158467.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:47.079Z,1510158467.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:47.427Z,1510158467.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:47.443Z,1510158467.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:47.827Z,1510158467.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:47.882Z,1510158467.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:48.224Z,1510158468.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:48.244Z,1510158468.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:48.623Z,1510158468.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:48.639Z,1510158468.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:49.018Z,1510158469.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:49.034Z,1510158469.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:49.431Z,1510158469.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:49.447Z,1510158469.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:49.831Z,1510158469.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:49.851Z,1510158469.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:50.231Z,1510158470.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:50.251Z,1510158470.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:50.621Z,1510158470.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:50.638Z,1510158470.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:51.022Z,1510158471.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:51.038Z,1510158471.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:51.421Z,1510158471.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:51.443Z,1510158471.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:51.819Z,1510158471.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:51.849Z,1510158471.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:52.222Z,1510158472.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:52.238Z,1510158472.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:52.628Z,1510158472.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:52.644Z,1510158472.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:53.031Z,1510158473.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:53.052Z,1510158473.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:53.431Z,1510158473.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:53.451Z,1510158473.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:53.814Z,1510158473.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:53.845Z,1510158473.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:54.219Z,1510158474.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:54.248Z,1510158474.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:54.622Z,1510158474.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:54.638Z,1510158474.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:55.014Z,1510158475.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:55.045Z,1510158475.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:55.430Z,1510158475.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:55.447Z,1510158475.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:55.831Z,1510158475.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:55.851Z,1510158475.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:56.231Z,1510158476.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:56.284Z,1510158476.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:56.621Z,1510158476.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:56.638Z,1510158476.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:57.022Z,1510158477.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:57.038Z,1510158477.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:57.415Z,1510158477.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:57.437Z,1510158477.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:57.822Z,1510158477.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:57.839Z,1510158477.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:58.224Z,1510158478.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:58.254Z,1510158478.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:58.628Z,1510158478.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:58.644Z,1510158478.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:59.030Z,1510158479.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:59.051Z,1510158479.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:59.432Z,1510158479.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:59.448Z,1510158479.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:27:59.814Z,1510158479.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:27:59.840Z,1510158479.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:00.219Z,1510158480.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:00.240Z,1510158480.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:00.623Z,1510158480.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:00.639Z,1510158480.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:01.022Z,1510158481.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:01.038Z,1510158481.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:01.430Z,1510158481.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:01.447Z,1510158481.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:01.831Z,1510158481.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:01.848Z,1510158481.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:02.231Z,1510158482.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:02.252Z,1510158482.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:02.621Z,1510158482.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:02.638Z,1510158482.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:03.022Z,1510158483.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:03.042Z,1510158483.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:03.422Z,1510158483.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:03.438Z,1510158483.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:03.822Z,1510158483.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:03.839Z,1510158483.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:04.223Z,1510158484.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:04.239Z,1510158484.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:04.631Z,1510158484.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:04.652Z,1510158484.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:05.031Z,1510158485.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:05.052Z,1510158485.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:05.432Z,1510158485.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:05.448Z,1510158485.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:05.822Z,1510158485.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:05.838Z,1510158485.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:06.219Z,1510158486.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:06.241Z,1510158486.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:06.623Z,1510158486.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:06.680Z,1510158486.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:07.015Z,1510158487.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:07.047Z,1510158487.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:07.432Z,1510158487.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:07.448Z,1510158487.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:07.836Z,1510158487.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:07.911Z,1510158487.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:08.232Z,1510158488.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:08.248Z,1510158488.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:08.615Z,1510158488.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:08.640Z,1510158488.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:09.015Z,1510158489.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:09.080Z,1510158489.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:09.411Z,1510158489.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:09.441Z,1510158489.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:09.816Z,1510158489.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:09.885Z,1510158489.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:10.215Z,1510158490.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:10.243Z,1510158490.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:10.632Z,1510158490.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:10.648Z,1510158490.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:11.037Z,1510158491.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:11.054Z,1510158491.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:11.434Z,1510158491.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:11.456Z,1510158491.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:11.812Z,1510158491.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:11.847Z,1510158491.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:12.219Z,1510158492.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:12.247Z,1510158492.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:12.617Z,1510158492.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:12.651Z,1510158492.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:13.013Z,1510158493.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:13.041Z,1510158493.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:13.439Z,1510158493.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:13.455Z,1510158493.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:13.830Z,1510158493.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:13.862Z,1510158493.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:14.234Z,1510158494.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:14.250Z,1510158494.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:14.616Z,1510158494.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:14.646Z,1510158494.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:15.016Z,1510158495.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:15.048Z,1510158495.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:15.415Z,1510158495.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:15.455Z,1510158495.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:15.816Z,1510158495.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:15.849Z,1510158495.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:16.215Z,1510158496.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:16.254Z,1510158496.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:16.632Z,1510158496.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:16.650Z,1510158496.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:17.035Z,1510158497.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:17.054Z,1510158497.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:17.436Z,1510158497.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:17.453Z,1510158497.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:17.811Z,1510158497.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:17.845Z,1510158497.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:18.215Z,1510158498.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:18.267Z,1510158498.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:18.616Z,1510158498.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:18.646Z,1510158498.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:19.015Z,1510158499.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:19.045Z,1510158499.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:19.432Z,1510158499.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:19.448Z,1510158499.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:19.836Z,1510158499.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:19.852Z,1510158499.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:20.232Z,1510158500.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:20.248Z,1510158500.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:20.615Z,1510158500.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:20.646Z,1510158500.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:21.011Z,1510158501.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:21.046Z,1510158501.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:21.415Z,1510158501.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:21.446Z,1510158501.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:21.815Z,1510158501.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:21.845Z,1510158501.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:22.211Z,1510158502.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:22.248Z,1510158502.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:22.632Z,1510158502.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:22.649Z,1510158502.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:23.032Z,1510158503.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:23.049Z,1510158503.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:23.433Z,1510158503.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:23.455Z,1510158503.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:23.811Z,1510158503.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:23.872Z,1510158503.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:24.215Z,1510158504.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:24.251Z,1510158504.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:24.612Z,1510158504.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:24.652Z,1510158504.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:25.011Z,1510158505.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:25.052Z,1510158505.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:25.426Z,1510158505.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:25.458Z,1510158505.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:25.825Z,1510158505.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:25.855Z,1510158505.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:26.226Z,1510158506.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:26.257Z,1510158506.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:26.615Z,1510158506.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:26.649Z,1510158506.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:27.015Z,1510158507.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:27.052Z,1510158507.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:27.415Z,1510158507.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:27.449Z,1510158507.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:27.816Z,1510158507.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:27.849Z,1510158507.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:28.211Z,1510158508.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:28.251Z,1510158508.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:28.630Z,1510158508.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:28.660Z,1510158508.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:29.029Z,1510158509.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:29.060Z,1510158509.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:29.425Z,1510158509.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:29.453Z,1510158509.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:29.811Z,1510158509.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:29.832Z,1510158509.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:30.215Z,1510158510.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:30.279Z,1510158510.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:30.619Z,1510158510.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:30.635Z,1510158510.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:31.014Z,1510158511.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:31.031Z,1510158511.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:31.430Z,1510158511.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:31.475Z,1510158511.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:31.829Z,1510158511.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:31.861Z,1510158511.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:32.234Z,1510158512.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:32.291Z,1510158512.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:32.619Z,1510158512.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:32.639Z,1510158512.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:33.014Z,1510158513.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:33.035Z,1510158513.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:33.419Z,1510158513.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:33.439Z,1510158513.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:33.819Z,1510158513.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:33.839Z,1510158513.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:34.214Z,1510158514.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:34.235Z,1510158514.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:34.630Z,1510158514.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:34.660Z,1510158514.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:35.029Z,1510158515.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:35.060Z,1510158515.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:35.429Z,1510158515.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:35.461Z,1510158515.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:35.819Z,1510158515.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:35.839Z,1510158515.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:36.218Z,1510158516.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:36.235Z,1510158516.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:36.615Z,1510158516.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:36.635Z,1510158516.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:37.018Z,1510158517.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:37.034Z,1510158517.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:37.429Z,1510158517.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:37.460Z,1510158517.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:37.829Z,1510158517.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:37.861Z,1510158517.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:38.234Z,1510158518.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:38.257Z,1510158518.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:38.621Z,1510158518.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:38.637Z,1510158518.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:41.703Z,1510158521.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:41.767Z,1510158521.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:41.883Z,1510158521.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:41.920Z,1510158521.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:42.300Z,1510158522.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:42.316Z,1510158522.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:42.704Z,1510158522.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:42.720Z,1510158522.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:43.090Z,1510158523.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:43.122Z,1510158523.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:43.479Z,1510158523.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:43.514Z,1510158523.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:43.876Z,1510158523.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:43.892Z,1510158523.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:44.279Z,1510158524.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:44.313Z,1510158524.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:44.690Z,1510158524.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:44.719Z,1510158524.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:45.089Z,1510158525.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:45.119Z,1510158525.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:45.490Z,1510158525.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:45.520Z,1510158525.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:45.879Z,1510158525.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:45.904Z,1510158525.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:46.275Z,1510158526.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:46.291Z,1510158526.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:46.680Z,1510158526.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:46.718Z,1510158526.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:47.079Z,1510158527.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:47.096Z,1510158527.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:47.494Z,1510158527.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:47.519Z,1510158527.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:47.894Z,1510158527.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:47.931Z,1510158527.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:48.290Z,1510158528.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:48.315Z,1510158528.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:48.675Z,1510158528.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:48.691Z,1510158528.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:49.079Z,1510158529.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:49.096Z,1510158529.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:49.479Z,1510158529.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:49.499Z,1510158529.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:49.884Z,1510158529.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:49.900Z,1510158529.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:50.283Z,1510158530.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:50.300Z,1510158530.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:50.694Z,1510158530.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:50.726Z,1510158530.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:51.096Z,1510158531.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:51.126Z,1510158531.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:51.498Z,1510158531.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:51.523Z,1510158531.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:51.883Z,1510158531.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:51.903Z,1510158531.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:52.284Z,1510158532.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:52.300Z,1510158532.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:52.684Z,1510158532.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:52.700Z,1510158532.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:53.083Z,1510158533.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:53.103Z,1510158533.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:53.497Z,1510158533.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:53.576Z,1510158533.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:53.898Z,1510158533.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:53.953Z,1510158533.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:54.294Z,1510158534.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:54.326Z,1510158534.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:54.684Z,1510158534.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:54.731Z,1510158534.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:55.087Z,1510158535.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:55.107Z,1510158535.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:55.484Z,1510158535.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:55.535Z,1510158535.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:55.885Z,1510158535.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:55.901Z,1510158535.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:56.282Z,1510158536.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:56.302Z,1510158536.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:56.698Z,1510158536.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:56.722Z,1510158536.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:57.101Z,1510158537.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:57.133Z,1510158537.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:57.487Z,1510158537.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:57.503Z,1510158537.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:57.883Z,1510158537.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:57.901Z,1510158537.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:58.282Z,1510158538.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:58.298Z,1510158538.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:58.683Z,1510158538.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:58.707Z,1510158538.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:59.083Z,1510158539.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:59.101Z,1510158539.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:59.495Z,1510158539.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:59.512Z,1510158539.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:28:59.890Z,1510158539.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:28:59.908Z,1510158539.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:00.294Z,1510158540.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:00.312Z,1510158540.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:00.684Z,1510158540.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:00.701Z,1510158540.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:01.084Z,1510158541.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:01.100Z,1510158541.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:01.484Z,1510158541.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:01.500Z,1510158541.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:01.886Z,1510158541.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:01.902Z,1510158541.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:02.281Z,1510158542.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:02.297Z,1510158542.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:02.690Z,1510158542.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:02.706Z,1510158542.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:03.089Z,1510158543.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:03.105Z,1510158543.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:03.486Z,1510158543.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:03.507Z,1510158543.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:03.884Z,1510158543.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:03.939Z,1510158543.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:04.284Z,1510158544.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:04.308Z,1510158544.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:04.684Z,1510158544.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:04.708Z,1510158544.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:05.085Z,1510158545.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:05.101Z,1510158545.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:05.490Z,1510158545.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:05.506Z,1510158545.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:05.894Z,1510158545.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:05.910Z,1510158545.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:06.290Z,1510158546.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:06.306Z,1510158546.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:06.681Z,1510158546.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:06.703Z,1510158546.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:07.084Z,1510158547.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:07.100Z,1510158547.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:07.484Z,1510158547.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:07.507Z,1510158547.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:07.886Z,1510158547.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:07.902Z,1510158547.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:08.284Z,1510158548.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:08.300Z,1510158548.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:08.690Z,1510158548.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:08.707Z,1510158548.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:09.093Z,1510158549.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:09.109Z,1510158549.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:09.490Z,1510158549.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:09.506Z,1510158549.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:09.884Z,1510158549.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:09.907Z,1510158549.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:10.282Z,1510158550.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:10.303Z,1510158550.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:10.682Z,1510158550.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:10.698Z,1510158550.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:11.084Z,1510158551.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:11.100Z,1510158551.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:11.494Z,1510158551.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:11.510Z,1510158551.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:11.894Z,1510158551.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:11.910Z,1510158551.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:12.290Z,1510158552.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:12.306Z,1510158552.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:12.678Z,1510158552.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:12.712Z,1510158552.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:13.084Z,1510158553.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:13.101Z,1510158553.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:13.484Z,1510158553.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:13.500Z,1510158553.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:13.886Z,1510158553.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:13.902Z,1510158553.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:14.284Z,1510158554.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:14.300Z,1510158554.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:14.694Z,1510158554.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:14.702Z,1510158554.702 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-08T16:29:14.702Z,1510158554.702 [BPC1] Data Fault, FailCount= 1
2017-11-08T16:29:14.702Z,1510158554.702 [BPC1](ERROR): Data Fault
2017-11-08T16:29:14.712Z,1510158554.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:14.826Z,1510158554.826 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T16:29:15.090Z,1510158555.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:15.106Z,1510158555.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:15.490Z,1510158555.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:15.506Z,1510158555.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:15.884Z,1510158555.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:15.900Z,1510158555.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:15.981Z,1510158555.981 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T16:29:15.981Z,1510158555.981 [BPC1] No Fault, FailCount= 1
2017-11-08T16:29:16.282Z,1510158556.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:16.344Z,1510158556.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:16.685Z,1510158556.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:16.702Z,1510158556.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:17.084Z,1510158557.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:17.100Z,1510158557.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:17.489Z,1510158557.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:17.505Z,1510158557.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:17.890Z,1510158557.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:17.906Z,1510158557.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:18.290Z,1510158558.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:18.306Z,1510158558.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:18.685Z,1510158558.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:18.701Z,1510158558.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:19.081Z,1510158559.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:19.097Z,1510158559.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:19.484Z,1510158559.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:19.507Z,1510158559.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:19.882Z,1510158559.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:19.898Z,1510158559.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:20.281Z,1510158560.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:20.297Z,1510158560.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:20.690Z,1510158560.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:20.706Z,1510158560.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:21.093Z,1510158561.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:21.109Z,1510158561.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:21.490Z,1510158561.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:21.506Z,1510158561.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:21.886Z,1510158561.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:21.903Z,1510158561.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:22.282Z,1510158562.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:22.298Z,1510158562.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:22.682Z,1510158562.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:22.698Z,1510158562.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:23.084Z,1510158563.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:23.100Z,1510158563.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:23.494Z,1510158563.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:23.510Z,1510158563.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:23.890Z,1510158563.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:23.906Z,1510158563.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:24.294Z,1510158564.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:24.315Z,1510158564.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:24.685Z,1510158564.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:24.734Z,1510158564.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:25.084Z,1510158565.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:25.101Z,1510158565.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:25.484Z,1510158565.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:25.508Z,1510158565.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:25.886Z,1510158565.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:25.902Z,1510158565.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:26.284Z,1510158566.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:26.301Z,1510158566.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:26.690Z,1510158566.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:26.707Z,1510158566.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:27.089Z,1510158567.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:27.105Z,1510158567.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:27.490Z,1510158567.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:27.506Z,1510158567.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:27.884Z,1510158567.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:27.900Z,1510158567.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:28.285Z,1510158568.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:28.300Z,1510158568.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:28.686Z,1510158568.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:28.702Z,1510158568.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:29.084Z,1510158569.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:29.100Z,1510158569.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:29.490Z,1510158569.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:29.506Z,1510158569.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:29.890Z,1510158569.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:29.906Z,1510158569.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:30.290Z,1510158570.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:30.306Z,1510158570.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:30.686Z,1510158570.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:30.701Z,1510158570.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:31.086Z,1510158571.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:31.102Z,1510158571.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:31.485Z,1510158571.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:31.501Z,1510158571.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:31.887Z,1510158571.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:31.903Z,1510158571.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:32.283Z,1510158572.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:32.304Z,1510158572.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:32.690Z,1510158572.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:32.707Z,1510158572.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:33.093Z,1510158573.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:33.115Z,1510158573.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:33.490Z,1510158573.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:33.507Z,1510158573.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:33.887Z,1510158573.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:33.904Z,1510158573.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:34.281Z,1510158574.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:34.311Z,1510158574.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:34.689Z,1510158574.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:34.706Z,1510158574.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:35.083Z,1510158575.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:35.114Z,1510158575.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:35.494Z,1510158575.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:35.515Z,1510158575.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:35.892Z,1510158575.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:35.913Z,1510158575.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:36.295Z,1510158576.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:36.316Z,1510158576.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:36.683Z,1510158576.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:36.758Z,1510158576.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:37.079Z,1510158577.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:37.138Z,1510158577.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:37.487Z,1510158577.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:37.511Z,1510158577.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:37.883Z,1510158577.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:37.901Z,1510158577.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:38.290Z,1510158578.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:38.344Z,1510158578.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:38.662Z,1510158578.662 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T16:29:38.662Z,1510158578.662 [NAL9602] Data Fault, FailCount= 3
2017-11-08T16:29:38.662Z,1510158578.662 [NAL9602](ERROR): Data Fault
2017-11-08T16:29:38.686Z,1510158578.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:38.732Z,1510158578.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:38.813Z,1510158578.813 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T16:29:41.750Z,1510158581.750 [NAL9602](INFO): Powering down
2017-11-08T16:29:41.768Z,1510158581.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:41.835Z,1510158581.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:41.963Z,1510158581.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:41.000Z,1510158582.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:42.357Z,1510158582.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:42.373Z,1510158582.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:42.469Z,1510158582.469 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T16:29:42.469Z,1510158582.469 [NAL9602] No Fault, FailCount= 3
2017-11-08T16:29:42.760Z,1510158582.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:42.776Z,1510158582.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:43.155Z,1510158583.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:43.171Z,1510158583.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:43.551Z,1510158583.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:43.568Z,1510158583.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:43.950Z,1510158583.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:43.967Z,1510158583.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:44.351Z,1510158584.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:44.369Z,1510158584.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:44.752Z,1510158584.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:44.770Z,1510158584.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:45.149Z,1510158585.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:45.166Z,1510158585.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:45.549Z,1510158585.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:45.566Z,1510158585.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:45.953Z,1510158585.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:45.972Z,1510158585.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:46.353Z,1510158586.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:46.370Z,1510158586.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:46.749Z,1510158586.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:46.766Z,1510158586.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:47.153Z,1510158587.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:47.169Z,1510158587.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:47.553Z,1510158587.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:47.569Z,1510158587.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:47.949Z,1510158587.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:47.966Z,1510158587.966 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:47.966Z,1510158587.966 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62
2017-11-08T16:29:47.966Z,1510158587.966 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T16:29:47.968Z,1510158587.968 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:47.968Z,1510158587.968 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62
2017-11-08T16:29:47.968Z,1510158587.968 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T16:29:47.970Z,1510158587.970 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:47.970Z,1510158587.970 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 62
2017-11-08T16:29:47.970Z,1510158587.970 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T16:29:48.057Z,1510158588.057 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T16:29:48.057Z,1510158588.057 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T16:29:48.057Z,1510158588.057 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T16:29:48.356Z,1510158588.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:48.453Z,1510158588.453 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T16:29:48.453Z,1510158588.453 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62
2017-11-08T16:29:48.453Z,1510158588.453 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T16:29:48.453Z,1510158588.453 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62
2017-11-08T16:29:48.454Z,1510158588.454 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T16:29:48.454Z,1510158588.454 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 62
2017-11-08T16:29:48.752Z,1510158588.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:48.774Z,1510158588.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T16:29:48.775Z,1510158588.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:29:48.775Z,1510158588.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:29:48.775Z,1510158588.775 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T16:29:48.776Z,1510158588.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:29:48.776Z,1510158588.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:29:48.777Z,1510158588.777 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T16:29:48.777Z,1510158588.777 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:29:48.777Z,1510158588.777 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:29:49.147Z,1510158589.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:49.178Z,1510158589.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T16:29:49.179Z,1510158589.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:49.556Z,1510158589.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:49.572Z,1510158589.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T16:29:49.573Z,1510158589.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:49.947Z,1510158589.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:50.009Z,1510158590.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T16:29:50.010Z,1510158590.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:50.347Z,1510158590.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:50.372Z,1510158590.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T16:29:50.373Z,1510158590.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:50.747Z,1510158590.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:50.775Z,1510158590.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T16:29:50.776Z,1510158590.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:51.147Z,1510158591.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:51.179Z,1510158591.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T16:29:51.180Z,1510158591.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:51.557Z,1510158591.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:51.573Z,1510158591.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T16:29:51.574Z,1510158591.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:51.947Z,1510158591.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:51.971Z,1510158591.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T16:29:51.972Z,1510158591.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:52.347Z,1510158592.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:52.371Z,1510158592.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T16:29:52.372Z,1510158592.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:52.747Z,1510158592.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:52.779Z,1510158592.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T16:29:52.780Z,1510158592.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:53.147Z,1510158593.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:53.178Z,1510158593.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T16:29:53.179Z,1510158593.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:53.546Z,1510158593.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:53.578Z,1510158593.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T16:29:53.579Z,1510158593.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:53.947Z,1510158593.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:53.983Z,1510158593.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T16:29:53.984Z,1510158593.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:54.350Z,1510158594.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:54.380Z,1510158594.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T16:29:54.381Z,1510158594.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:54.750Z,1510158594.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:54.781Z,1510158594.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T16:29:54.782Z,1510158594.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:55.151Z,1510158595.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:55.182Z,1510158595.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T16:29:55.183Z,1510158595.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:55.550Z,1510158595.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:55.581Z,1510158595.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T16:29:55.582Z,1510158595.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:55.947Z,1510158595.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:55.982Z,1510158595.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T16:29:55.983Z,1510158595.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:56.347Z,1510158596.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:56.363Z,1510158596.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T16:29:56.363Z,1510158596.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:56.751Z,1510158596.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:56.766Z,1510158596.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T16:29:56.767Z,1510158596.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:57.147Z,1510158597.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:57.167Z,1510158597.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T16:29:57.168Z,1510158597.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:57.551Z,1510158597.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:57.567Z,1510158597.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T16:29:57.568Z,1510158597.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:57.951Z,1510158597.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:57.971Z,1510158597.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T16:29:57.972Z,1510158597.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:58.354Z,1510158598.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:58.370Z,1510158598.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T16:29:58.371Z,1510158598.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:58.755Z,1510158598.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:58.771Z,1510158598.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T16:29:58.771Z,1510158598.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:59.153Z,1510158599.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:59.169Z,1510158599.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T16:29:59.170Z,1510158599.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:59.553Z,1510158599.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:59.569Z,1510158599.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T16:29:59.570Z,1510158599.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:29:59.949Z,1510158599.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:29:59.966Z,1510158599.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T16:29:59.967Z,1510158599.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:00.353Z,1510158600.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:00.375Z,1510158600.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T16:30:00.376Z,1510158600.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:00.753Z,1510158600.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:00.775Z,1510158600.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T16:30:00.776Z,1510158600.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:01.153Z,1510158601.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:01.170Z,1510158601.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T16:30:01.170Z,1510158601.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:01.553Z,1510158601.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:01.569Z,1510158601.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T16:30:01.570Z,1510158601.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:01.954Z,1510158601.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:02.063Z,1510158602.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T16:30:02.064Z,1510158602.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:02.349Z,1510158602.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:02.365Z,1510158602.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T16:30:02.366Z,1510158602.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:02.752Z,1510158602.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:02.799Z,1510158602.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T16:30:02.800Z,1510158602.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:03.154Z,1510158603.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:03.169Z,1510158603.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T16:30:03.170Z,1510158603.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:03.549Z,1510158603.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:03.610Z,1510158603.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T16:30:03.611Z,1510158603.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:03.954Z,1510158603.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:03.969Z,1510158603.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T16:30:03.970Z,1510158603.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:04.354Z,1510158604.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:04.369Z,1510158604.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T16:30:04.370Z,1510158604.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:04.749Z,1510158604.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:04.765Z,1510158604.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T16:30:04.766Z,1510158604.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:05.153Z,1510158605.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:05.169Z,1510158605.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T16:30:05.169Z,1510158605.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:05.554Z,1510158605.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:05.570Z,1510158605.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T16:30:05.571Z,1510158605.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:05.949Z,1510158605.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:05.965Z,1510158605.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T16:30:05.966Z,1510158605.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:06.353Z,1510158606.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:06.369Z,1510158606.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T16:30:06.370Z,1510158606.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:06.754Z,1510158606.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:06.770Z,1510158606.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T16:30:06.771Z,1510158606.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:07.153Z,1510158607.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:07.169Z,1510158607.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T16:30:07.170Z,1510158607.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:07.553Z,1510158607.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:07.568Z,1510158607.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T16:30:07.569Z,1510158607.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:07.954Z,1510158607.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:07.971Z,1510158607.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:08.351Z,1510158608.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:08.367Z,1510158608.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:08.753Z,1510158608.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:08.769Z,1510158608.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:09.154Z,1510158609.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:09.170Z,1510158609.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:09.548Z,1510158609.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:09.565Z,1510158609.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:09.953Z,1510158609.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:09.970Z,1510158609.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:10.351Z,1510158610.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:10.372Z,1510158610.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:10.749Z,1510158610.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:10.766Z,1510158610.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:11.153Z,1510158611.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:11.169Z,1510158611.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:11.554Z,1510158611.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:11.570Z,1510158611.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:11.937Z,1510158611.937 [NAL9602](INFO): Powering up NAL9602
2017-11-08T16:30:11.954Z,1510158611.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:12.015Z,1510158612.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:12.354Z,1510158612.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:12.370Z,1510158612.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:12.754Z,1510158612.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:12.770Z,1510158612.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:13.153Z,1510158613.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:13.170Z,1510158613.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:13.553Z,1510158613.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:13.569Z,1510158613.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:13.954Z,1510158613.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:13.970Z,1510158613.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:14.352Z,1510158614.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:14.369Z,1510158614.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:14.752Z,1510158614.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:14.768Z,1510158614.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:15.154Z,1510158615.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:15.170Z,1510158615.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:15.553Z,1510158615.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:15.570Z,1510158615.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:15.954Z,1510158615.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:15.970Z,1510158615.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:16.354Z,1510158616.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:16.371Z,1510158616.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:16.750Z,1510158616.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:16.767Z,1510158616.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:17.155Z,1510158617.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:17.171Z,1510158617.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:17.555Z,1510158617.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:17.576Z,1510158617.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:17.954Z,1510158617.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:17.971Z,1510158617.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:18.355Z,1510158618.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:18.371Z,1510158618.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:18.755Z,1510158618.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:18.776Z,1510158618.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:19.153Z,1510158619.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:19.169Z,1510158619.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:19.555Z,1510158619.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:19.571Z,1510158619.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:19.959Z,1510158619.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:20.003Z,1510158620.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:20.355Z,1510158620.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:20.372Z,1510158620.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:20.760Z,1510158620.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:20.776Z,1510158620.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:21.155Z,1510158621.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:21.172Z,1510158621.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:21.560Z,1510158621.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:21.577Z,1510158621.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:21.954Z,1510158621.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:21.970Z,1510158621.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:22.356Z,1510158622.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:22.372Z,1510158622.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:22.759Z,1510158622.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:22.776Z,1510158622.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:23.137Z,1510158623.137 [NAL9602](INFO): NAL9602 initialized
2017-11-08T16:30:23.155Z,1510158623.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:23.173Z,1510158623.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:23.552Z,1510158623.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:23.615Z,1510158623.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:23.962Z,1510158623.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:24.036Z,1510158624.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:24.366Z,1510158624.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:24.388Z,1510158624.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:24.761Z,1510158624.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:24.811Z,1510158624.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:25.157Z,1510158625.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:25.174Z,1510158625.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:25.556Z,1510158625.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:25.619Z,1510158625.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:25.953Z,1510158625.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:25.971Z,1510158625.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:26.354Z,1510158626.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:26.370Z,1510158626.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:26.762Z,1510158626.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:26.778Z,1510158626.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:27.161Z,1510158627.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:27.177Z,1510158627.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:27.561Z,1510158627.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:27.578Z,1510158627.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:27.956Z,1510158627.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:27.972Z,1510158627.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:28.353Z,1510158628.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:28.368Z,1510158628.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:28.754Z,1510158628.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:28.771Z,1510158628.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:29.156Z,1510158629.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:29.172Z,1510158629.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:29.558Z,1510158629.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:29.574Z,1510158629.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:29.962Z,1510158629.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:29.978Z,1510158629.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:30.366Z,1510158630.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:30.382Z,1510158630.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:30.753Z,1510158630.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:30.775Z,1510158630.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:31.154Z,1510158631.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:31.170Z,1510158631.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:31.562Z,1510158631.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:31.584Z,1510158631.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:31.962Z,1510158631.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:31.983Z,1510158631.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:32.363Z,1510158632.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:32.379Z,1510158632.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:32.758Z,1510158632.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:32.774Z,1510158632.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:33.153Z,1510158633.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:33.169Z,1510158633.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:33.563Z,1510158633.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:33.579Z,1510158633.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:33.966Z,1510158633.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:34.015Z,1510158634.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:34.360Z,1510158634.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:34.395Z,1510158634.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:34.758Z,1510158634.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:34.775Z,1510158634.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:35.157Z,1510158635.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:35.173Z,1510158635.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:35.563Z,1510158635.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:35.579Z,1510158635.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:35.971Z,1510158635.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:35.988Z,1510158635.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:36.370Z,1510158636.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:36.386Z,1510158636.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:36.747Z,1510158636.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:36.779Z,1510158636.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:37.158Z,1510158637.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:37.174Z,1510158637.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:37.567Z,1510158637.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:37.584Z,1510158637.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:37.967Z,1510158637.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:37.987Z,1510158637.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:38.371Z,1510158638.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:38.388Z,1510158638.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:38.762Z,1510158638.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:38.784Z,1510158638.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:41.855Z,1510158641.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:41.872Z,1510158641.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:41.998Z,1510158641.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:42.046Z,1510158642.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:42.398Z,1510158642.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:42.424Z,1510158642.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:42.798Z,1510158642.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:42.832Z,1510158642.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:43.184Z,1510158643.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:43.200Z,1510158643.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:43.583Z,1510158643.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:43.603Z,1510158643.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:43.988Z,1510158643.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:44.004Z,1510158644.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:44.387Z,1510158644.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:44.403Z,1510158644.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:44.798Z,1510158644.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:44.828Z,1510158644.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:45.197Z,1510158645.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:45.228Z,1510158645.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:45.598Z,1510158645.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:45.628Z,1510158645.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:45.987Z,1510158645.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:46.051Z,1510158646.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:46.385Z,1510158646.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:46.457Z,1510158646.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:46.787Z,1510158646.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:46.808Z,1510158646.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:47.186Z,1510158647.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:47.239Z,1510158647.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:47.597Z,1510158647.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:47.639Z,1510158647.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:47.998Z,1510158647.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:48.053Z,1510158648.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:48.398Z,1510158648.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:48.430Z,1510158648.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:48.785Z,1510158648.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:48.807Z,1510158648.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:49.186Z,1510158649.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:49.203Z,1510158649.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:49.590Z,1510158649.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:49.607Z,1510158649.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:49.986Z,1510158649.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:50.002Z,1510158650.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:50.387Z,1510158650.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:50.403Z,1510158650.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:50.798Z,1510158650.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:50.814Z,1510158650.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:51.194Z,1510158651.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:51.210Z,1510158651.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:51.598Z,1510158651.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:51.619Z,1510158651.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:51.989Z,1510158651.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:52.011Z,1510158652.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:52.386Z,1510158652.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:52.402Z,1510158652.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:52.790Z,1510158652.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:52.806Z,1510158652.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:53.189Z,1510158653.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:53.212Z,1510158653.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:53.595Z,1510158653.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:53.611Z,1510158653.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:53.998Z,1510158653.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:54.014Z,1510158654.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:54.398Z,1510158654.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:54.414Z,1510158654.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:54.786Z,1510158654.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:54.802Z,1510158654.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:55.189Z,1510158655.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:55.206Z,1510158655.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:55.589Z,1510158655.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:55.605Z,1510158655.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:55.986Z,1510158655.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:56.002Z,1510158656.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:56.382Z,1510158656.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:56.435Z,1510158656.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:56.794Z,1510158656.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:56.816Z,1510158656.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:57.197Z,1510158657.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:57.214Z,1510158657.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:57.598Z,1510158657.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:57.614Z,1510158657.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:57.989Z,1510158657.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:58.006Z,1510158658.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:58.387Z,1510158658.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:58.403Z,1510158658.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:58.782Z,1510158658.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:58.805Z,1510158658.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:59.189Z,1510158659.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:59.212Z,1510158659.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:59.597Z,1510158659.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:30:59.613Z,1510158659.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:30:59.995Z,1510158659.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:00.015Z,1510158660.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:00.398Z,1510158660.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:00.414Z,1510158660.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:00.787Z,1510158660.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:00.812Z,1510158660.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:01.191Z,1510158661.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:01.212Z,1510158661.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:01.590Z,1510158661.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:01.607Z,1510158661.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:01.994Z,1510158661.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:02.010Z,1510158662.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:02.383Z,1510158662.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:02.407Z,1510158662.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:02.799Z,1510158662.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:02.819Z,1510158662.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:03.201Z,1510158663.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:03.217Z,1510158663.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:03.599Z,1510158663.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:03.619Z,1510158663.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:03.991Z,1510158663.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:04.008Z,1510158664.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:04.388Z,1510158664.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:04.405Z,1510158664.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:04.793Z,1510158664.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:04.810Z,1510158664.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:05.190Z,1510158665.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:05.215Z,1510158665.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:05.599Z,1510158665.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:05.625Z,1510158665.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:05.000Z,1510158666.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:06.024Z,1510158666.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:06.401Z,1510158666.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:06.417Z,1510158666.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:06.790Z,1510158666.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:06.808Z,1510158666.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:07.189Z,1510158667.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:07.207Z,1510158667.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:07.587Z,1510158667.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:07.610Z,1510158667.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:07.989Z,1510158667.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:08.014Z,1510158668.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:08.379Z,1510158668.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:08.468Z,1510158668.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:08.800Z,1510158668.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:08.816Z,1510158668.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:09.204Z,1510158669.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:09.263Z,1510158669.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:09.600Z,1510158669.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:09.616Z,1510158669.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:09.984Z,1510158669.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:10.049Z,1510158670.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:10.383Z,1510158670.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:10.408Z,1510158670.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:10.780Z,1510158670.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:10.810Z,1510158670.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:11.179Z,1510158671.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:11.218Z,1510158671.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:11.601Z,1510158671.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:11.617Z,1510158671.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:12.000Z,1510158672.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:12.017Z,1510158672.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:12.390Z,1510158672.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:12.421Z,1510158672.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:12.779Z,1510158672.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:12.807Z,1510158672.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:13.183Z,1510158673.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:13.217Z,1510158673.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:13.583Z,1510158673.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:13.619Z,1510158673.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:13.984Z,1510158673.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:14.020Z,1510158674.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:14.379Z,1510158674.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:14.415Z,1510158674.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:14.794Z,1510158674.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:14.819Z,1510158674.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:15.197Z,1510158675.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:15.223Z,1510158675.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:15.590Z,1510158675.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:15.622Z,1510158675.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:15.983Z,1510158675.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:15.000Z,1510158676.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:16.379Z,1510158676.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:16.399Z,1510158676.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:16.788Z,1510158676.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:16.824Z,1510158676.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:17.183Z,1510158677.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:17.206Z,1510158677.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:17.593Z,1510158677.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:17.609Z,1510158677.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:17.994Z,1510158677.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:18.010Z,1510158678.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:18.398Z,1510158678.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:18.444Z,1510158678.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:18.785Z,1510158678.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:18.804Z,1510158678.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:19.186Z,1510158679.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:19.203Z,1510158679.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:19.586Z,1510158679.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:19.603Z,1510158679.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:19.984Z,1510158679.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:20.004Z,1510158680.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:20.389Z,1510158680.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:20.406Z,1510158680.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:20.794Z,1510158680.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:20.816Z,1510158680.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:21.197Z,1510158681.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:21.214Z,1510158681.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:21.594Z,1510158681.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:21.611Z,1510158681.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:21.989Z,1510158681.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:22.005Z,1510158682.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:22.386Z,1510158682.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:22.402Z,1510158682.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:22.790Z,1510158682.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:22.806Z,1510158682.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:23.189Z,1510158683.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:23.206Z,1510158683.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:23.598Z,1510158683.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:23.614Z,1510158683.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:23.994Z,1510158683.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:24.015Z,1510158684.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:24.394Z,1510158684.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:24.415Z,1510158684.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:24.790Z,1510158684.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:24.806Z,1510158684.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:25.189Z,1510158685.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:25.206Z,1510158685.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:25.589Z,1510158685.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:25.605Z,1510158685.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:25.992Z,1510158685.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:26.008Z,1510158686.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:26.383Z,1510158686.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:26.414Z,1510158686.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:26.794Z,1510158686.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:26.812Z,1510158686.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:27.198Z,1510158687.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:27.214Z,1510158687.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:27.594Z,1510158687.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:27.616Z,1510158687.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:27.989Z,1510158687.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:28.005Z,1510158688.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:28.390Z,1510158688.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:28.406Z,1510158688.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:28.789Z,1510158688.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:28.806Z,1510158688.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:29.182Z,1510158689.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:29.205Z,1510158689.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:29.599Z,1510158689.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:29.619Z,1510158689.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:29.999Z,1510158689.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:30.063Z,1510158690.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:30.398Z,1510158690.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:30.459Z,1510158690.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:30.790Z,1510158690.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:30.806Z,1510158690.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:31.189Z,1510158691.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:31.252Z,1510158691.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:31.589Z,1510158691.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:31.605Z,1510158691.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:31.991Z,1510158691.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:32.054Z,1510158692.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:32.389Z,1510158692.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:32.405Z,1510158692.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:32.799Z,1510158692.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:32.819Z,1510158692.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:33.207Z,1510158693.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:33.226Z,1510158693.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:33.594Z,1510158693.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:33.614Z,1510158693.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:33.987Z,1510158693.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:34.012Z,1510158694.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:34.379Z,1510158694.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:34.405Z,1510158694.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:34.780Z,1510158694.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:34.815Z,1510158694.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:35.183Z,1510158695.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:35.212Z,1510158695.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:35.604Z,1510158695.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:35.620Z,1510158695.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:36.001Z,1510158696.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:36.017Z,1510158696.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:36.400Z,1510158696.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:36.416Z,1510158696.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:36.779Z,1510158696.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:36.814Z,1510158696.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:37.179Z,1510158697.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:37.211Z,1510158697.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:37.587Z,1510158697.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:37.619Z,1510158697.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:37.984Z,1510158697.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:38.015Z,1510158698.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:38.381Z,1510158698.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:38.421Z,1510158698.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:38.804Z,1510158698.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:38.821Z,1510158698.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:41.895Z,1510158701.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:41.956Z,1510158701.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:42.086Z,1510158702.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:42.124Z,1510158702.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:42.479Z,1510158702.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:42.510Z,1510158702.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:42.876Z,1510158702.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:42.904Z,1510158702.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:43.275Z,1510158703.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:43.315Z,1510158703.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:43.690Z,1510158703.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:43.715Z,1510158703.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:44.089Z,1510158704.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:44.117Z,1510158704.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:44.486Z,1510158704.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:44.518Z,1510158704.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:44.879Z,1510158704.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:44.899Z,1510158704.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:45.278Z,1510158705.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:45.294Z,1510158705.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:45.679Z,1510158705.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:45.699Z,1510158705.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:46.080Z,1510158706.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:46.096Z,1510158706.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:46.475Z,1510158706.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:46.495Z,1510158706.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:46.886Z,1510158706.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:46.918Z,1510158706.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:47.293Z,1510158707.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:47.325Z,1510158707.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:47.693Z,1510158707.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:47.726Z,1510158707.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:48.079Z,1510158708.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:48.096Z,1510158708.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:48.479Z,1510158708.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:48.496Z,1510158708.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:48.880Z,1510158708.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:48.897Z,1510158708.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:49.275Z,1510158709.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:49.293Z,1510158709.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:49.690Z,1510158709.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:49.723Z,1510158709.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:50.085Z,1510158710.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:50.102Z,1510158710.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:50.494Z,1510158710.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:50.534Z,1510158710.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:50.883Z,1510158710.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:50.899Z,1510158710.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:51.279Z,1510158711.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:51.295Z,1510158711.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:51.678Z,1510158711.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:51.694Z,1510158711.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:52.082Z,1510158712.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:52.099Z,1510158712.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:52.479Z,1510158712.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:52.499Z,1510158712.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:52.890Z,1510158712.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:52.906Z,1510158712.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:53.290Z,1510158713.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:53.307Z,1510158713.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:53.690Z,1510158713.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:53.711Z,1510158713.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:54.083Z,1510158714.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:54.156Z,1510158714.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:54.479Z,1510158714.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:54.565Z,1510158714.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:54.876Z,1510158714.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:54.912Z,1510158714.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:55.285Z,1510158715.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:55.342Z,1510158715.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:55.696Z,1510158715.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:55.713Z,1510158715.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:56.096Z,1510158716.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:56.141Z,1510158716.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:56.492Z,1510158716.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:56.509Z,1510158716.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:56.885Z,1510158716.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:56.908Z,1510158716.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:57.286Z,1510158717.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:57.301Z,1510158717.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:57.671Z,1510158717.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:57.702Z,1510158717.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:58.076Z,1510158718.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:58.107Z,1510158718.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:58.486Z,1510158718.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:58.501Z,1510158718.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:58.890Z,1510158718.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:58.910Z,1510158718.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:59.295Z,1510158719.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:59.311Z,1510158719.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:31:59.692Z,1510158719.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:31:59.708Z,1510158719.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:00.085Z,1510158720.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:00.101Z,1510158720.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:00.475Z,1510158720.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:00.500Z,1510158720.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:00.872Z,1510158720.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:00.903Z,1510158720.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:01.275Z,1510158721.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:01.308Z,1510158721.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:01.695Z,1510158721.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:01.711Z,1510158721.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:02.098Z,1510158722.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:02.114Z,1510158722.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:02.487Z,1510158722.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:02.504Z,1510158722.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:02.875Z,1510158722.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:02.911Z,1510158722.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:03.286Z,1510158723.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:03.301Z,1510158723.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:03.672Z,1510158723.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:03.706Z,1510158723.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:04.076Z,1510158724.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:04.104Z,1510158724.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:04.475Z,1510158724.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:04.537Z,1510158724.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:04.895Z,1510158724.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:04.912Z,1510158724.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:05.295Z,1510158725.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:05.311Z,1510158725.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:05.696Z,1510158725.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:05.712Z,1510158725.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:06.075Z,1510158726.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:06.107Z,1510158726.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:06.485Z,1510158726.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:06.501Z,1510158726.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:06.886Z,1510158726.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:06.902Z,1510158726.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:07.275Z,1510158727.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:07.307Z,1510158727.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:07.691Z,1510158727.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:07.708Z,1510158727.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:08.096Z,1510158728.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:08.115Z,1510158728.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:08.491Z,1510158728.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:08.508Z,1510158728.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:08.875Z,1510158728.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:08.909Z,1510158728.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:09.276Z,1510158729.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:09.301Z,1510158729.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:09.675Z,1510158729.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:09.703Z,1510158729.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:10.080Z,1510158730.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:10.112Z,1510158730.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:10.475Z,1510158730.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:10.508Z,1510158730.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:10.882Z,1510158730.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:10.914Z,1510158730.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:11.299Z,1510158731.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:11.316Z,1510158731.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:11.701Z,1510158731.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:11.717Z,1510158731.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:12.075Z,1510158732.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:12.106Z,1510158732.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:12.475Z,1510158732.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:12.505Z,1510158732.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:12.880Z,1510158732.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:12.906Z,1510158732.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:13.279Z,1510158733.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:13.304Z,1510158733.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:13.696Z,1510158733.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:13.712Z,1510158733.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:14.092Z,1510158734.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:14.109Z,1510158734.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:14.495Z,1510158734.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:14.512Z,1510158734.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:14.879Z,1510158734.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:14.904Z,1510158734.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:15.276Z,1510158735.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:15.307Z,1510158735.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:15.680Z,1510158735.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:15.705Z,1510158735.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:16.084Z,1510158736.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:16.147Z,1510158736.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:16.476Z,1510158736.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:16.504Z,1510158736.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:16.886Z,1510158736.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:16.935Z,1510158736.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:17.290Z,1510158737.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:17.322Z,1510158737.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:17.701Z,1510158737.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:17.763Z,1510158737.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:18.079Z,1510158738.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:18.113Z,1510158738.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:18.475Z,1510158738.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:18.528Z,1510158738.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:18.876Z,1510158738.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:18.909Z,1510158738.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:19.279Z,1510158739.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:19.319Z,1510158739.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:19.690Z,1510158739.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:19.722Z,1510158739.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:20.094Z,1510158740.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:20.120Z,1510158740.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:20.490Z,1510158740.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:20.522Z,1510158740.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:20.883Z,1510158740.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:20.925Z,1510158740.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:21.279Z,1510158741.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:21.296Z,1510158741.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:21.675Z,1510158741.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:21.691Z,1510158741.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:22.080Z,1510158742.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:22.120Z,1510158742.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:22.483Z,1510158742.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:22.500Z,1510158742.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:22.890Z,1510158742.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:22.922Z,1510158742.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:23.293Z,1510158743.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:23.324Z,1510158743.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:23.690Z,1510158743.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:23.722Z,1510158743.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:24.082Z,1510158744.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:24.098Z,1510158744.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:24.484Z,1510158744.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:24.500Z,1510158744.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:24.879Z,1510158744.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:24.896Z,1510158744.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:25.278Z,1510158745.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:25.295Z,1510158745.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:25.698Z,1510158745.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:25.730Z,1510158745.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:26.097Z,1510158746.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:26.129Z,1510158746.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:26.490Z,1510158746.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:26.531Z,1510158746.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:26.880Z,1510158746.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:26.939Z,1510158746.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:27.280Z,1510158747.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:27.297Z,1510158747.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:27.679Z,1510158747.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:27.696Z,1510158747.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:28.080Z,1510158748.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:28.097Z,1510158748.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:28.478Z,1510158748.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:28.495Z,1510158748.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:28.894Z,1510158748.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:28.932Z,1510158748.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:29.298Z,1510158749.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:29.334Z,1510158749.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:29.690Z,1510158749.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:29.707Z,1510158749.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:30.078Z,1510158750.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:30.094Z,1510158750.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:30.482Z,1510158750.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:30.499Z,1510158750.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:30.882Z,1510158750.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:30.902Z,1510158750.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:31.277Z,1510158751.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:31.294Z,1510158751.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:31.686Z,1510158751.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:31.703Z,1510158751.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:32.094Z,1510158752.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:32.110Z,1510158752.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:32.490Z,1510158752.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:32.507Z,1510158752.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:32.880Z,1510158752.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:32.896Z,1510158752.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:33.278Z,1510158753.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:33.294Z,1510158753.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:33.682Z,1510158753.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:33.698Z,1510158753.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:34.083Z,1510158754.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:34.104Z,1510158754.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:34.478Z,1510158754.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:34.499Z,1510158754.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:34.886Z,1510158754.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:34.902Z,1510158754.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:35.294Z,1510158755.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:35.310Z,1510158755.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:35.693Z,1510158755.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:35.709Z,1510158755.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:36.079Z,1510158756.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:36.100Z,1510158756.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:36.479Z,1510158756.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:36.500Z,1510158756.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:36.883Z,1510158756.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:36.903Z,1510158756.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:37.282Z,1510158757.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:37.299Z,1510158757.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:37.686Z,1510158757.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:37.702Z,1510158757.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:38.089Z,1510158758.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:38.105Z,1510158758.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:38.494Z,1510158758.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:38.510Z,1510158758.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:38.882Z,1510158758.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:38.958Z,1510158758.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:38.966Z,1510158758.966 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T16:27:38.6Z
2017-11-08T16:32:38.966Z,1510158758.966 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T16:32:38.966Z,1510158758.966 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T16:32:41.959Z,1510158761.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:42.011Z,1510158762.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:42.579Z,1510158762.579 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171108T132236/Courier0024.lzma
2017-11-08T16:32:42.601Z,1510158762.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:42.642Z,1510158762.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:42.784Z,1510158762.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:42.819Z,1510158762.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:43.137Z,1510158763.137 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0024.lzma.bak
2017-11-08T16:32:43.138Z,1510158763.138 [DataOverHttps](INFO): SBD MOMSN=5222986
2017-11-08T16:32:43.191Z,1510158763.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:43.212Z,1510158763.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:44.201Z,1510158764.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:44.248Z,1510158764.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:44.359Z,1510158764.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:44.396Z,1510158764.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:47.442Z,1510158767.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:47.487Z,1510158767.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:47.604Z,1510158767.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:47.655Z,1510158767.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:48.028Z,1510158768.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:48.045Z,1510158768.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:48.432Z,1510158768.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:48.452Z,1510158768.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:48.818Z,1510158768.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:48.854Z,1510158768.854 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:48.854Z,1510158768.854 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63
2017-11-08T16:32:48.854Z,1510158768.854 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T16:32:48.856Z,1510158768.856 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:48.856Z,1510158768.856 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63
2017-11-08T16:32:48.856Z,1510158768.856 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T16:32:48.858Z,1510158768.858 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:48.858Z,1510158768.858 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 63
2017-11-08T16:32:48.858Z,1510158768.858 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T16:32:48.933Z,1510158768.933 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T16:32:48.933Z,1510158768.933 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T16:32:48.933Z,1510158768.933 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T16:32:49.208Z,1510158769.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:49.333Z,1510158769.333 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T16:32:49.333Z,1510158769.333 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63
2017-11-08T16:32:49.333Z,1510158769.333 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T16:32:49.333Z,1510158769.333 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63
2017-11-08T16:32:49.334Z,1510158769.334 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T16:32:49.334Z,1510158769.334 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 63
2017-11-08T16:32:52.294Z,1510158772.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:52.311Z,1510158772.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T16:32:52.311Z,1510158772.311 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:32:52.311Z,1510158772.311 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:32:52.312Z,1510158772.312 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T16:32:52.312Z,1510158772.312 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:32:52.313Z,1510158772.313 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:32:52.313Z,1510158772.313 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T16:32:52.313Z,1510158772.313 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:32:52.314Z,1510158772.314 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:32:52.405Z,1510158772.405 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T16:32:52.413Z,1510158772.413 [DataOverHttps](INFO): Sending 220 bytes from file Logs/20171108T132236/Express0025.lzma
2017-11-08T16:32:52.448Z,1510158772.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:52.472Z,1510158772.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T16:32:52.473Z,1510158772.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:52.856Z,1510158772.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:52.873Z,1510158772.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T16:32:52.874Z,1510158772.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:53.213Z,1510158773.213 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0025.lzma.bak
2017-11-08T16:32:53.213Z,1510158773.213 [DataOverHttps](INFO): SBD MOMSN=5222988
2017-11-08T16:32:53.263Z,1510158773.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:53.293Z,1510158773.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T16:32:53.294Z,1510158773.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:54.199Z,1510158774.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:54.223Z,1510158774.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2017-11-08T16:32:54.224Z,1510158774.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:54.227Z,1510158774.227 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T16:32:54.227Z,1510158774.227 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T16:32:54.227Z,1510158774.227 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T16:32:54.336Z,1510158774.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:54.384Z,1510158774.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-08T16:32:54.385Z,1510158774.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:57.422Z,1510158777.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:57.469Z,1510158777.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2017-11-08T16:32:57.470Z,1510158777.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:57.571Z,1510158777.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:57.620Z,1510158777.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T16:32:57.621Z,1510158777.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:58.001Z,1510158778.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:58.017Z,1510158778.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T16:32:58.018Z,1510158778.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:58.402Z,1510158778.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:58.424Z,1510158778.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T16:32:58.425Z,1510158778.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:58.790Z,1510158778.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:58.816Z,1510158778.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T16:32:58.817Z,1510158778.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:59.172Z,1510158779.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:59.307Z,1510158779.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T16:32:59.308Z,1510158779.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:59.571Z,1510158779.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:32:59.627Z,1510158779.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T16:32:59.628Z,1510158779.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:32:59.973Z,1510158779.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:00.043Z,1510158780.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T16:33:00.044Z,1510158780.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:00.375Z,1510158780.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:00.402Z,1510158780.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2017-11-08T16:33:00.403Z,1510158780.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:00.793Z,1510158780.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:00.809Z,1510158780.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T16:33:00.809Z,1510158780.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:01.191Z,1510158781.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:01.215Z,1510158781.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T16:33:01.216Z,1510158781.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:01.591Z,1510158781.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:01.609Z,1510158781.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T16:33:01.610Z,1510158781.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:01.971Z,1510158781.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:01.996Z,1510158781.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2017-11-08T16:33:01.997Z,1510158781.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:02.375Z,1510158782.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:02.400Z,1510158782.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2017-11-08T16:33:02.401Z,1510158782.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:02.776Z,1510158782.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:02.801Z,1510158782.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2017-11-08T16:33:02.802Z,1510158782.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:03.171Z,1510158783.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:03.186Z,1510158783.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2017-11-08T16:33:03.187Z,1510158783.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:03.586Z,1510158783.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:03.614Z,1510158783.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T16:33:03.615Z,1510158783.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:03.994Z,1510158783.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:04.019Z,1510158784.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T16:33:04.020Z,1510158784.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:04.393Z,1510158784.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:04.420Z,1510158784.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T16:33:04.421Z,1510158784.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:04.779Z,1510158784.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:04.799Z,1510158784.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2017-11-08T16:33:04.800Z,1510158784.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:05.179Z,1510158785.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:05.199Z,1510158785.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2017-11-08T16:33:05.200Z,1510158785.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:05.577Z,1510158785.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:05.593Z,1510158785.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2017-11-08T16:33:05.593Z,1510158785.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:05.976Z,1510158785.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:05.993Z,1510158785.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2017-11-08T16:33:05.994Z,1510158785.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:06.378Z,1510158786.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:06.394Z,1510158786.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2017-11-08T16:33:06.395Z,1510158786.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:06.784Z,1510158786.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:06.800Z,1510158786.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2017-11-08T16:33:06.801Z,1510158786.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:07.186Z,1510158787.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:07.202Z,1510158787.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2017-11-08T16:33:07.203Z,1510158787.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:07.590Z,1510158787.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:07.606Z,1510158787.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T16:33:07.607Z,1510158787.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:07.978Z,1510158787.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:07.994Z,1510158787.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2017-11-08T16:33:07.995Z,1510158787.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:08.374Z,1510158788.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:08.402Z,1510158788.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2017-11-08T16:33:08.403Z,1510158788.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:08.780Z,1510158788.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:08.796Z,1510158788.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2017-11-08T16:33:08.797Z,1510158788.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:09.177Z,1510158789.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:09.193Z,1510158789.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:09.586Z,1510158789.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:09.648Z,1510158789.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:09.990Z,1510158789.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:10.055Z,1510158790.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:10.391Z,1510158790.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:10.407Z,1510158790.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:10.775Z,1510158790.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:10.796Z,1510158790.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:11.181Z,1510158791.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:11.241Z,1510158791.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:11.582Z,1510158791.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:11.597Z,1510158791.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:11.978Z,1510158791.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:12.037Z,1510158792.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:12.381Z,1510158792.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:12.397Z,1510158792.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:12.791Z,1510158792.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:12.807Z,1510158792.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:13.190Z,1510158793.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:13.206Z,1510158793.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:13.591Z,1510158793.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:13.607Z,1510158793.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:13.978Z,1510158793.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:13.994Z,1510158793.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:14.377Z,1510158794.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:14.393Z,1510158794.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:14.781Z,1510158794.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:14.797Z,1510158794.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:15.178Z,1510158795.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:15.199Z,1510158795.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:15.596Z,1510158795.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:15.624Z,1510158795.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:15.995Z,1510158795.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:16.015Z,1510158796.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:16.391Z,1510158796.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:16.407Z,1510158796.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:16.771Z,1510158796.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:16.796Z,1510158796.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:17.175Z,1510158797.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:17.208Z,1510158797.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:17.571Z,1510158797.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:17.597Z,1510158797.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:17.972Z,1510158797.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:18.006Z,1510158798.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:18.375Z,1510158798.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:18.400Z,1510158798.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:18.796Z,1510158798.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:18.812Z,1510158798.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:19.191Z,1510158799.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:19.207Z,1510158799.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:19.591Z,1510158799.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:19.608Z,1510158799.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:19.972Z,1510158799.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:20.006Z,1510158800.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:20.371Z,1510158800.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:20.419Z,1510158800.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:20.776Z,1510158800.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:20.801Z,1510158800.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:21.175Z,1510158801.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:21.200Z,1510158801.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:21.592Z,1510158801.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:21.608Z,1510158801.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:21.996Z,1510158801.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:22.012Z,1510158802.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:22.396Z,1510158802.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:22.412Z,1510158802.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:22.771Z,1510158802.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:22.800Z,1510158802.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:23.175Z,1510158803.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:23.206Z,1510158803.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:23.575Z,1510158803.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:23.606Z,1510158803.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:23.976Z,1510158803.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:24.006Z,1510158804.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:24.375Z,1510158804.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:24.405Z,1510158804.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:24.796Z,1510158804.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:24.812Z,1510158804.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:25.192Z,1510158805.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:25.208Z,1510158805.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:25.592Z,1510158805.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:25.608Z,1510158805.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:25.975Z,1510158805.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:26.006Z,1510158806.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:26.375Z,1510158806.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:26.405Z,1510158806.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:26.776Z,1510158806.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:26.806Z,1510158806.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:27.175Z,1510158807.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:27.212Z,1510158807.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:27.595Z,1510158807.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:27.612Z,1510158807.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:27.994Z,1510158807.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:28.010Z,1510158808.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:28.393Z,1510158808.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:28.409Z,1510158808.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:28.775Z,1510158808.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:28.806Z,1510158808.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:29.175Z,1510158809.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:29.206Z,1510158809.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:29.575Z,1510158809.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:29.606Z,1510158809.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:29.977Z,1510158809.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:30.006Z,1510158810.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:30.375Z,1510158810.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:30.406Z,1510158810.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:30.796Z,1510158810.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:30.813Z,1510158810.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:31.193Z,1510158811.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:31.210Z,1510158811.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:31.596Z,1510158811.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:31.613Z,1510158811.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:31.972Z,1510158811.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:32.006Z,1510158812.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:32.376Z,1510158812.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:32.450Z,1510158812.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:32.777Z,1510158812.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:32.806Z,1510158812.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:33.176Z,1510158813.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:33.225Z,1510158813.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:33.590Z,1510158813.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:33.613Z,1510158813.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:33.997Z,1510158813.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:34.013Z,1510158814.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:34.393Z,1510158814.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:34.409Z,1510158814.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:34.771Z,1510158814.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:34.808Z,1510158814.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:35.175Z,1510158815.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:35.207Z,1510158815.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:35.571Z,1510158815.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:35.579Z,1510158815.579 [BPC1](ERROR): Failed to receive battery data
2017-11-08T16:33:35.579Z,1510158815.579 [BPC1] Communications Fault, FailCount= 1
2017-11-08T16:33:35.579Z,1510158815.579 [BPC1](ERROR): Communications Fault
2017-11-08T16:33:35.588Z,1510158815.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:35.717Z,1510158815.717 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T16:33:35.976Z,1510158815.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:36.005Z,1510158816.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:36.371Z,1510158816.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:36.387Z,1510158816.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:36.786Z,1510158816.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:36.819Z,1510158816.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:36.893Z,1510158816.893 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T16:33:36.893Z,1510158816.893 [BPC1] No Fault, FailCount= 1
2017-11-08T16:33:37.194Z,1510158817.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:37.280Z,1510158817.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:37.590Z,1510158817.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:37.620Z,1510158817.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:37.972Z,1510158817.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:37.995Z,1510158817.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:38.372Z,1510158818.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:38.392Z,1510158818.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:38.780Z,1510158818.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:38.797Z,1510158818.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:39.178Z,1510158819.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:39.195Z,1510158819.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:39.587Z,1510158819.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:39.603Z,1510158819.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:39.990Z,1510158819.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:40.006Z,1510158820.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:40.390Z,1510158820.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:40.406Z,1510158820.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:40.780Z,1510158820.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:40.797Z,1510158820.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:41.179Z,1510158821.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:41.196Z,1510158821.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:41.578Z,1510158821.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:41.594Z,1510158821.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:41.978Z,1510158821.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:41.994Z,1510158821.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:42.380Z,1510158822.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:42.396Z,1510158822.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:42.785Z,1510158822.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:42.801Z,1510158822.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:43.186Z,1510158823.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:43.208Z,1510158823.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:43.585Z,1510158823.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:43.603Z,1510158823.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:43.981Z,1510158823.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:43.997Z,1510158823.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:44.377Z,1510158824.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:44.393Z,1510158824.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:44.781Z,1510158824.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:44.796Z,1510158824.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:45.178Z,1510158825.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:45.193Z,1510158825.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:45.586Z,1510158825.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:45.639Z,1510158825.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:45.989Z,1510158825.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:46.011Z,1510158826.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:46.388Z,1510158826.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:46.404Z,1510158826.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:46.778Z,1510158826.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:46.794Z,1510158826.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:47.175Z,1510158827.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:47.203Z,1510158827.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:47.580Z,1510158827.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:47.596Z,1510158827.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:47.978Z,1510158827.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:47.994Z,1510158827.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:48.377Z,1510158828.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:48.392Z,1510158828.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:48.789Z,1510158828.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:48.805Z,1510158828.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:49.186Z,1510158829.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:49.202Z,1510158829.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:49.582Z,1510158829.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:49.603Z,1510158829.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:49.981Z,1510158829.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:49.997Z,1510158829.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:50.377Z,1510158830.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:50.393Z,1510158830.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:50.781Z,1510158830.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:50.796Z,1510158830.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:51.180Z,1510158831.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:51.196Z,1510158831.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:51.586Z,1510158831.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:51.602Z,1510158831.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:51.989Z,1510158831.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:52.005Z,1510158832.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:52.389Z,1510158832.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:52.411Z,1510158832.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:52.775Z,1510158832.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:52.796Z,1510158832.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:53.179Z,1510158833.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:53.195Z,1510158833.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:53.581Z,1510158833.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:53.597Z,1510158833.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:53.978Z,1510158833.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:53.995Z,1510158833.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:54.381Z,1510158834.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:54.397Z,1510158834.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:54.793Z,1510158834.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:54.840Z,1510158834.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:57.893Z,1510158837.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:57.972Z,1510158837.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:58.110Z,1510158838.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:58.140Z,1510158838.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:58.495Z,1510158838.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:58.512Z,1510158838.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:58.895Z,1510158838.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:58.955Z,1510158838.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:59.295Z,1510158839.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:59.310Z,1510158839.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:33:59.710Z,1510158839.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:33:59.780Z,1510158839.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:00.109Z,1510158840.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:00.136Z,1510158840.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:00.505Z,1510158840.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:00.538Z,1510158840.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:00.895Z,1510158840.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:00.912Z,1510158840.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:01.295Z,1510158841.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:01.315Z,1510158841.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:01.694Z,1510158841.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:01.709Z,1510158841.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:02.095Z,1510158842.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:02.115Z,1510158842.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:02.490Z,1510158842.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:02.506Z,1510158842.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:02.905Z,1510158842.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:02.942Z,1510158842.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:03.305Z,1510158843.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:03.344Z,1510158843.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:03.702Z,1510158843.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:03.718Z,1510158843.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:04.093Z,1510158844.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:04.109Z,1510158844.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:04.494Z,1510158844.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:04.511Z,1510158844.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:04.895Z,1510158844.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:04.915Z,1510158844.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:05.293Z,1510158845.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:05.309Z,1510158845.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:05.705Z,1510158845.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:05.740Z,1510158845.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:06.105Z,1510158846.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:06.140Z,1510158846.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:06.505Z,1510158846.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:06.543Z,1510158846.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:06.894Z,1510158846.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:06.911Z,1510158846.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:07.294Z,1510158847.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:07.310Z,1510158847.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:07.694Z,1510158847.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:07.709Z,1510158847.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:08.095Z,1510158848.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:08.141Z,1510158848.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:08.490Z,1510158848.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:08.506Z,1510158848.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:08.905Z,1510158848.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:08.934Z,1510158848.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:09.306Z,1510158849.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:09.342Z,1510158849.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:09.706Z,1510158849.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:09.722Z,1510158849.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:10.093Z,1510158850.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:10.115Z,1510158850.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:10.497Z,1510158850.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:10.513Z,1510158850.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:10.897Z,1510158850.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:10.914Z,1510158850.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:11.293Z,1510158851.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:11.315Z,1510158851.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:11.706Z,1510158851.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:11.722Z,1510158851.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:12.106Z,1510158852.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:12.122Z,1510158852.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:12.501Z,1510158852.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:12.517Z,1510158852.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:12.897Z,1510158852.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:12.914Z,1510158852.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:13.297Z,1510158853.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:13.313Z,1510158853.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:13.693Z,1510158853.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:13.715Z,1510158853.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:14.096Z,1510158854.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:14.117Z,1510158854.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:14.496Z,1510158854.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:14.513Z,1510158854.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:14.901Z,1510158854.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:14.923Z,1510158854.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:15.306Z,1510158855.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:15.322Z,1510158855.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:15.702Z,1510158855.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:15.719Z,1510158855.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:16.096Z,1510158856.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:16.112Z,1510158856.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:16.497Z,1510158856.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:16.514Z,1510158856.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:16.894Z,1510158856.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:16.910Z,1510158856.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:17.296Z,1510158857.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:17.311Z,1510158857.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:17.706Z,1510158857.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:17.722Z,1510158857.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:18.106Z,1510158858.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:18.122Z,1510158858.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:18.501Z,1510158858.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:18.523Z,1510158858.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:18.897Z,1510158858.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:18.971Z,1510158858.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:19.297Z,1510158859.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:19.320Z,1510158859.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:19.691Z,1510158859.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:19.741Z,1510158859.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:20.099Z,1510158860.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:20.115Z,1510158860.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:20.497Z,1510158860.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:20.553Z,1510158860.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:20.907Z,1510158860.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:20.923Z,1510158860.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:21.307Z,1510158861.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:21.363Z,1510158861.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:21.707Z,1510158861.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:21.727Z,1510158861.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:22.099Z,1510158862.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:22.115Z,1510158862.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:22.499Z,1510158862.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:22.515Z,1510158862.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:22.895Z,1510158862.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:22.911Z,1510158862.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:23.299Z,1510158863.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:23.315Z,1510158863.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:23.708Z,1510158863.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:23.731Z,1510158863.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:24.107Z,1510158864.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:24.127Z,1510158864.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:24.507Z,1510158864.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:24.523Z,1510158864.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:24.896Z,1510158864.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:24.912Z,1510158864.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:25.291Z,1510158865.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:25.314Z,1510158865.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:25.698Z,1510158865.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:25.715Z,1510158865.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:26.095Z,1510158866.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:26.112Z,1510158866.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:26.492Z,1510158866.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:26.514Z,1510158866.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:26.907Z,1510158866.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:26.924Z,1510158866.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:27.307Z,1510158867.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:27.324Z,1510158867.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:27.708Z,1510158867.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:27.724Z,1510158867.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:28.098Z,1510158868.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:28.114Z,1510158868.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:28.495Z,1510158868.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:28.511Z,1510158868.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:28.898Z,1510158868.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:28.920Z,1510158868.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:29.290Z,1510158869.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:29.317Z,1510158869.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:29.707Z,1510158869.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:29.757Z,1510158869.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:30.111Z,1510158870.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:30.132Z,1510158870.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:30.508Z,1510158870.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:30.532Z,1510158870.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:30.887Z,1510158870.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:30.913Z,1510158870.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:31.297Z,1510158871.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:31.314Z,1510158871.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:31.697Z,1510158871.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:31.714Z,1510158871.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:32.098Z,1510158872.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:32.114Z,1510158872.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:32.487Z,1510158872.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:32.516Z,1510158872.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:32.907Z,1510158872.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:32.923Z,1510158872.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:33.308Z,1510158873.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:33.323Z,1510158873.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:33.707Z,1510158873.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:33.724Z,1510158873.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:34.097Z,1510158874.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:34.113Z,1510158874.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:34.487Z,1510158874.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:34.512Z,1510158874.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:34.888Z,1510158874.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:34.925Z,1510158874.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:35.287Z,1510158875.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:35.324Z,1510158875.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:35.709Z,1510158875.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:35.725Z,1510158875.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:36.108Z,1510158876.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:36.125Z,1510158876.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:36.497Z,1510158876.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:36.527Z,1510158876.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:36.887Z,1510158876.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:36.922Z,1510158876.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:37.291Z,1510158877.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:37.321Z,1510158877.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:37.687Z,1510158877.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:37.721Z,1510158877.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:38.088Z,1510158878.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:38.116Z,1510158878.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:38.487Z,1510158878.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:38.524Z,1510158878.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:38.897Z,1510158878.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:38.929Z,1510158878.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:39.305Z,1510158879.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:39.335Z,1510158879.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:39.702Z,1510158879.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:39.727Z,1510158879.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:40.087Z,1510158880.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:40.152Z,1510158880.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:40.487Z,1510158880.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:40.503Z,1510158880.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:40.888Z,1510158880.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:40.904Z,1510158880.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:41.291Z,1510158881.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:41.307Z,1510158881.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:41.701Z,1510158881.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:41.749Z,1510158881.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:42.101Z,1510158882.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:42.128Z,1510158882.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:42.501Z,1510158882.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:42.527Z,1510158882.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:42.891Z,1510158882.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:42.950Z,1510158882.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:43.291Z,1510158883.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:43.332Z,1510158883.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:43.687Z,1510158883.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:43.737Z,1510158883.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:44.088Z,1510158884.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:44.111Z,1510158884.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:44.491Z,1510158884.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:44.507Z,1510158884.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:44.897Z,1510158884.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:44.936Z,1510158884.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:45.301Z,1510158885.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:45.334Z,1510158885.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:45.706Z,1510158885.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:45.731Z,1510158885.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:46.091Z,1510158886.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:46.111Z,1510158886.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:46.487Z,1510158886.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:46.503Z,1510158886.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:46.892Z,1510158886.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:46.908Z,1510158886.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:47.291Z,1510158887.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:47.321Z,1510158887.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:47.705Z,1510158887.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:47.738Z,1510158887.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:48.109Z,1510158888.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:48.140Z,1510158888.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:48.506Z,1510158888.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:48.538Z,1510158888.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:48.895Z,1510158888.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:48.911Z,1510158888.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:49.294Z,1510158889.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:49.310Z,1510158889.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:49.694Z,1510158889.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:49.710Z,1510158889.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:50.090Z,1510158890.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:50.106Z,1510158890.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:50.494Z,1510158890.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:50.510Z,1510158890.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:50.906Z,1510158890.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:50.936Z,1510158890.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:51.305Z,1510158891.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:51.337Z,1510158891.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:51.706Z,1510158891.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:51.736Z,1510158891.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:52.095Z,1510158892.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:52.155Z,1510158892.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:52.494Z,1510158892.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:52.510Z,1510158892.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:52.895Z,1510158892.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:52.916Z,1510158892.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:53.295Z,1510158893.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:53.315Z,1510158893.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:53.705Z,1510158893.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:53.738Z,1510158893.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:54.102Z,1510158894.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:54.118Z,1510158894.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:54.506Z,1510158894.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:54.538Z,1510158894.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:54.898Z,1510158894.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:54.914Z,1510158894.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:57.979Z,1510158897.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:57.996Z,1510158897.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:58.108Z,1510158898.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:58.124Z,1510158898.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:58.537Z,1510158898.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:58.553Z,1510158898.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:58.936Z,1510158898.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:58.960Z,1510158898.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:59.322Z,1510158899.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:59.347Z,1510158899.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:34:59.712Z,1510158899.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:34:59.750Z,1510158899.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:00.111Z,1510158900.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:00.148Z,1510158900.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:00.522Z,1510158900.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:00.554Z,1510158900.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:00.925Z,1510158900.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:00.959Z,1510158900.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:01.326Z,1510158901.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:01.351Z,1510158901.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:01.712Z,1510158901.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:01.760Z,1510158901.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:02.115Z,1510158902.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:02.131Z,1510158902.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:02.530Z,1510158902.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:02.554Z,1510158902.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:02.925Z,1510158902.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:02.977Z,1510158902.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:03.329Z,1510158903.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:03.363Z,1510158903.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:03.717Z,1510158903.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:03.733Z,1510158903.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:04.111Z,1510158904.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:04.183Z,1510158904.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:04.526Z,1510158904.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:04.542Z,1510158904.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:04.922Z,1510158904.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:04.983Z,1510158904.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:05.330Z,1510158905.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:05.365Z,1510158905.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:05.719Z,1510158905.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:05.763Z,1510158905.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:06.118Z,1510158906.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:06.134Z,1510158906.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:06.522Z,1510158906.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:06.539Z,1510158906.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:06.925Z,1510158906.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:06.942Z,1510158906.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:07.319Z,1510158907.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:07.336Z,1510158907.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:07.717Z,1510158907.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:07.734Z,1510158907.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:08.116Z,1510158908.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:08.133Z,1510158908.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:08.518Z,1510158908.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:08.543Z,1510158908.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:08.927Z,1510158908.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:08.943Z,1510158908.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:09.325Z,1510158909.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:09.342Z,1510158909.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:09.717Z,1510158909.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:09.734Z,1510158909.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:10.116Z,1510158910.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:10.132Z,1510158910.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:10.525Z,1510158910.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:10.543Z,1510158910.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:10.922Z,1510158910.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:10.938Z,1510158910.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:11.322Z,1510158911.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:11.338Z,1510158911.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:11.714Z,1510158911.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:11.735Z,1510158911.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:12.115Z,1510158912.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:12.136Z,1510158912.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:12.522Z,1510158912.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:12.538Z,1510158912.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:12.921Z,1510158912.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:12.937Z,1510158912.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:13.318Z,1510158913.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:13.339Z,1510158913.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:13.716Z,1510158913.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:13.733Z,1510158913.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:14.116Z,1510158914.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:14.164Z,1510158914.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:14.526Z,1510158914.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:14.542Z,1510158914.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:14.925Z,1510158914.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:14.942Z,1510158914.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:15.325Z,1510158915.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:15.347Z,1510158915.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:15.717Z,1510158915.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:15.739Z,1510158915.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:16.118Z,1510158916.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:16.134Z,1510158916.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:16.518Z,1510158916.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:16.533Z,1510158916.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:16.922Z,1510158916.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:16.939Z,1510158916.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:17.325Z,1510158917.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:17.342Z,1510158917.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:17.725Z,1510158917.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:17.747Z,1510158917.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:18.117Z,1510158918.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:18.139Z,1510158918.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:18.516Z,1510158918.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:18.533Z,1510158918.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:18.914Z,1510158918.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:18.930Z,1510158918.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:19.313Z,1510158919.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:19.329Z,1510158919.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:19.722Z,1510158919.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:19.744Z,1510158919.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:20.125Z,1510158920.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:20.141Z,1510158920.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:20.522Z,1510158920.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:20.538Z,1510158920.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:20.917Z,1510158920.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:20.933Z,1510158920.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:21.318Z,1510158921.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:21.334Z,1510158921.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:21.718Z,1510158921.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:21.734Z,1510158921.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:22.117Z,1510158922.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:22.133Z,1510158922.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:22.523Z,1510158922.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:22.543Z,1510158922.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:22.926Z,1510158922.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:22.942Z,1510158922.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:23.322Z,1510158923.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:23.344Z,1510158923.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:23.718Z,1510158923.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:23.734Z,1510158923.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:24.111Z,1510158924.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:24.132Z,1510158924.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:24.523Z,1510158924.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:24.548Z,1510158924.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:24.926Z,1510158924.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:24.989Z,1510158924.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:25.322Z,1510158925.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:25.343Z,1510158925.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:25.718Z,1510158925.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:25.734Z,1510158925.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:26.118Z,1510158926.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:26.134Z,1510158926.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:26.522Z,1510158926.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:26.538Z,1510158926.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:26.925Z,1510158926.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:26.942Z,1510158926.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:27.325Z,1510158927.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:27.341Z,1510158927.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:27.718Z,1510158927.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:27.734Z,1510158927.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:28.116Z,1510158928.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:28.133Z,1510158928.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:28.524Z,1510158928.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:28.540Z,1510158928.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:28.922Z,1510158928.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:28.943Z,1510158928.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:29.322Z,1510158929.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:29.330Z,1510158929.330 [BPC1](ERROR): Failed to receive battery data
2017-11-08T16:35:29.330Z,1510158929.330 [BPC1] Communications Fault, FailCount= 1
2017-11-08T16:35:29.330Z,1510158929.330 [BPC1](ERROR): Communications Fault
2017-11-08T16:35:29.340Z,1510158929.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:29.421Z,1510158929.421 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T16:35:29.714Z,1510158929.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:29.735Z,1510158929.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:30.117Z,1510158930.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:30.139Z,1510158930.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:30.526Z,1510158930.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:30.542Z,1510158930.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:30.617Z,1510158930.617 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T16:35:30.617Z,1510158930.617 [BPC1] No Fault, FailCount= 1
2017-11-08T16:35:30.926Z,1510158930.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:30.989Z,1510158930.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:31.327Z,1510158931.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:31.348Z,1510158931.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:31.715Z,1510158931.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:31.745Z,1510158931.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:32.118Z,1510158932.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:32.133Z,1510158932.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:32.526Z,1510158932.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:32.542Z,1510158932.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:32.926Z,1510158932.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:32.948Z,1510158932.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:33.327Z,1510158933.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:33.342Z,1510158933.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:33.718Z,1510158933.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:33.734Z,1510158933.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:34.115Z,1510158934.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:34.136Z,1510158934.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:34.527Z,1510158934.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:34.543Z,1510158934.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:34.926Z,1510158934.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:34.942Z,1510158934.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:35.326Z,1510158935.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:35.342Z,1510158935.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:35.714Z,1510158935.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:35.735Z,1510158935.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:36.117Z,1510158936.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:36.139Z,1510158936.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:36.526Z,1510158936.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:36.548Z,1510158936.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:36.926Z,1510158936.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:36.942Z,1510158936.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:37.327Z,1510158937.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:37.344Z,1510158937.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:37.717Z,1510158937.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:37.734Z,1510158937.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:38.118Z,1510158938.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:38.133Z,1510158938.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:38.523Z,1510158938.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:38.540Z,1510158938.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:38.927Z,1510158938.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:38.948Z,1510158938.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:39.327Z,1510158939.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:39.375Z,1510158939.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:39.719Z,1510158939.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:39.739Z,1510158939.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:40.115Z,1510158940.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:40.144Z,1510158940.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:40.527Z,1510158940.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:40.543Z,1510158940.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:40.927Z,1510158940.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:40.944Z,1510158940.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:41.327Z,1510158941.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:41.348Z,1510158941.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:41.718Z,1510158941.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:41.734Z,1510158941.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:42.124Z,1510158942.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:42.140Z,1510158942.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:42.519Z,1510158942.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:42.535Z,1510158942.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:42.928Z,1510158942.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:42.944Z,1510158942.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:43.328Z,1510158943.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:43.345Z,1510158943.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:43.728Z,1510158943.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:43.744Z,1510158943.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:44.119Z,1510158944.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:44.135Z,1510158944.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:44.510Z,1510158944.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:44.544Z,1510158944.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:44.621Z,1510158944.621 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:35:44.621Z,1510158944.621 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T16:35:44.915Z,1510158944.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:44.939Z,1510158944.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:45.021Z,1510158945.021 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:35:45.021Z,1510158945.021 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:35:45.021Z,1510158945.021 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:35:45.021Z,1510158945.021 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T16:35:45.022Z,1510158945.022 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:35:45.022Z,1510158945.022 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:35:45.311Z,1510158945.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:45.335Z,1510158945.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:45.425Z,1510158945.425 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:35:45.512Z,1510158945.512 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:35:45.727Z,1510158945.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:45.748Z,1510158945.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:46.126Z,1510158946.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:46.148Z,1510158946.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:46.531Z,1510158946.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:46.571Z,1510158946.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:46.919Z,1510158946.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:46.936Z,1510158946.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:47.014Z,1510158947.014 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:35:47.014Z,1510158947.014 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T16:35:47.129Z,1510158947.129 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:35:47.129Z,1510158947.129 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:35:47.129Z,1510158947.129 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:35:47.129Z,1510158947.129 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T16:35:47.129Z,1510158947.129 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:35:47.307Z,1510158947.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:47.340Z,1510158947.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:47.421Z,1510158947.421 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:35:47.533Z,1510158947.533 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:35:47.617Z,1510158947.617 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:35:47.726Z,1510158947.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:47.745Z,1510158947.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:48.108Z,1510158948.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:48.144Z,1510158948.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:48.527Z,1510158948.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:48.545Z,1510158948.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:48.931Z,1510158948.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:48.949Z,1510158948.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:49.029Z,1510158949.029 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:35:49.029Z,1510158949.029 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T16:35:49.233Z,1510158949.233 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:35:49.233Z,1510158949.233 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:35:49.233Z,1510158949.233 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:35:49.233Z,1510158949.233 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T16:35:49.233Z,1510158949.233 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:35:49.327Z,1510158949.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:49.349Z,1510158949.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:49.425Z,1510158949.425 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:35:49.637Z,1510158949.637 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:35:49.721Z,1510158949.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:49.801Z,1510158949.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:49.815Z,1510158949.815 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:35:50.112Z,1510158950.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:50.148Z,1510158950.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:50.528Z,1510158950.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:50.588Z,1510158950.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:50.928Z,1510158950.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:50.952Z,1510158950.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:51.033Z,1510158951.033 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:35:51.034Z,1510158951.034 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T16:35:51.329Z,1510158951.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:51.386Z,1510158951.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:51.437Z,1510158951.437 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:35:51.437Z,1510158951.437 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:35:51.437Z,1510158951.437 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:35:51.437Z,1510158951.437 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T16:35:51.437Z,1510158951.437 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:35:51.469Z,1510158951.469 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:35:51.708Z,1510158951.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:51.724Z,1510158951.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:51.841Z,1510158951.841 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:35:51.925Z,1510158951.925 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:35:52.112Z,1510158952.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:52.151Z,1510158952.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:52.526Z,1510158952.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:52.557Z,1510158952.557 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:52.557Z,1510158952.557 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64
2017-11-08T16:35:52.557Z,1510158952.557 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T16:35:52.559Z,1510158952.559 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:52.559Z,1510158952.559 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64
2017-11-08T16:35:52.559Z,1510158952.559 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T16:35:52.561Z,1510158952.561 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:52.562Z,1510158952.562 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 64
2017-11-08T16:35:52.562Z,1510158952.562 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T16:35:52.633Z,1510158952.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T16:35:52.633Z,1510158952.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T16:35:52.633Z,1510158952.633 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T16:35:52.922Z,1510158952.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:53.025Z,1510158953.025 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T16:35:53.025Z,1510158953.025 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64
2017-11-08T16:35:53.025Z,1510158953.025 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T16:35:53.026Z,1510158953.026 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64
2017-11-08T16:35:53.026Z,1510158953.026 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T16:35:53.026Z,1510158953.026 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 64
2017-11-08T16:35:53.321Z,1510158953.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:53.347Z,1510158953.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T16:35:53.347Z,1510158953.347 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:35:53.348Z,1510158953.348 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:35:53.348Z,1510158953.348 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T16:35:53.349Z,1510158953.349 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:35:53.349Z,1510158953.349 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:35:53.350Z,1510158953.350 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T16:35:53.350Z,1510158953.350 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:35:53.350Z,1510158953.350 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:35:53.429Z,1510158953.429 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:35:53.429Z,1510158953.429 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T16:35:53.541Z,1510158953.541 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:35:53.541Z,1510158953.541 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:35:53.541Z,1510158953.541 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:35:53.541Z,1510158953.541 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T16:35:53.542Z,1510158953.542 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:35:53.727Z,1510158953.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:53.751Z,1510158953.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T16:35:53.752Z,1510158953.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:53.841Z,1510158953.841 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:35:53.841Z,1510158953.841 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:35:53.945Z,1510158953.945 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:35:54.024Z,1510158954.024 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:35:54.116Z,1510158954.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:54.143Z,1510158954.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T16:35:54.144Z,1510158954.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:54.525Z,1510158954.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:54.557Z,1510158954.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T16:35:54.558Z,1510158954.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:54.929Z,1510158954.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:54.956Z,1510158954.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T16:35:54.957Z,1510158954.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:58.006Z,1510158958.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:58.026Z,1510158958.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-08T16:35:58.027Z,1510158958.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:58.162Z,1510158958.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:58.183Z,1510158958.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T16:35:58.200Z,1510158958.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:58.559Z,1510158958.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:58.576Z,1510158958.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T16:35:58.577Z,1510158958.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:58.958Z,1510158958.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:58.976Z,1510158958.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T16:35:58.977Z,1510158958.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:59.356Z,1510158959.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:59.406Z,1510158959.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T16:35:59.407Z,1510158959.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:35:59.766Z,1510158959.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:35:59.787Z,1510158959.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T16:35:59.788Z,1510158959.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:00.166Z,1510158960.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:00.187Z,1510158960.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T16:36:00.188Z,1510158960.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:00.562Z,1510158960.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:00.583Z,1510158960.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T16:36:00.584Z,1510158960.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:00.958Z,1510158960.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:00.975Z,1510158960.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T16:36:00.976Z,1510158960.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:01.358Z,1510158961.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:01.375Z,1510158961.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T16:36:01.376Z,1510158961.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:01.757Z,1510158961.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:01.773Z,1510158961.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T16:36:01.774Z,1510158961.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:02.158Z,1510158962.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:02.175Z,1510158962.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T16:36:02.176Z,1510158962.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:02.566Z,1510158962.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:02.587Z,1510158962.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T16:36:02.588Z,1510158962.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:02.964Z,1510158962.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:02.981Z,1510158962.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T16:36:02.982Z,1510158962.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:03.366Z,1510158963.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:03.387Z,1510158963.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T16:36:03.388Z,1510158963.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:03.759Z,1510158963.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:03.776Z,1510158963.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T16:36:03.777Z,1510158963.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:04.154Z,1510158964.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:04.175Z,1510158964.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T16:36:04.176Z,1510158964.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:04.566Z,1510158964.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:04.632Z,1510158964.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T16:36:04.633Z,1510158964.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:04.966Z,1510158964.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:04.983Z,1510158964.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T16:36:04.985Z,1510158964.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:05.362Z,1510158965.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:05.378Z,1510158965.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T16:36:05.379Z,1510158965.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:05.757Z,1510158965.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:05.785Z,1510158965.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T16:36:05.786Z,1510158965.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:06.157Z,1510158966.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:06.174Z,1510158966.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T16:36:06.175Z,1510158966.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:06.562Z,1510158966.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:06.579Z,1510158966.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T16:36:06.580Z,1510158966.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:06.966Z,1510158966.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:06.987Z,1510158966.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T16:36:06.988Z,1510158966.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:07.362Z,1510158967.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:07.383Z,1510158967.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T16:36:07.384Z,1510158967.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:07.757Z,1510158967.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:07.774Z,1510158967.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T16:36:07.775Z,1510158967.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:08.155Z,1510158968.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:08.176Z,1510158968.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T16:36:08.177Z,1510158968.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:08.567Z,1510158968.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:08.591Z,1510158968.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T16:36:08.592Z,1510158968.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:08.966Z,1510158968.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:08.983Z,1510158968.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T16:36:08.984Z,1510158968.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:09.367Z,1510158969.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:09.391Z,1510158969.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T16:36:09.392Z,1510158969.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:09.757Z,1510158969.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:09.827Z,1510158969.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T16:36:09.829Z,1510158969.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:10.157Z,1510158970.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:10.175Z,1510158970.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T16:36:10.176Z,1510158970.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:10.567Z,1510158970.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:10.591Z,1510158970.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T16:36:10.592Z,1510158970.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:10.966Z,1510158970.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:10.987Z,1510158970.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T16:36:10.988Z,1510158970.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:11.366Z,1510158971.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:11.383Z,1510158971.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T16:36:11.384Z,1510158971.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:11.757Z,1510158971.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:11.810Z,1510158971.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T16:36:11.811Z,1510158971.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:12.147Z,1510158972.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:12.182Z,1510158972.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T16:36:12.183Z,1510158972.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:12.562Z,1510158972.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:12.613Z,1510158972.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:12.972Z,1510158972.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:12.988Z,1510158972.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:13.367Z,1510158973.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:13.391Z,1510158973.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:13.757Z,1510158973.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:13.774Z,1510158973.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:14.158Z,1510158974.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:14.175Z,1510158974.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:14.562Z,1510158974.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:14.591Z,1510158974.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:14.972Z,1510158974.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:14.988Z,1510158974.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:15.372Z,1510158975.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:15.389Z,1510158975.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:15.752Z,1510158975.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:15.777Z,1510158975.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:16.147Z,1510158976.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:16.180Z,1510158976.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:16.573Z,1510158976.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:16.589Z,1510158976.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:16.967Z,1510158976.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:16.991Z,1510158976.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:17.363Z,1510158977.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:17.379Z,1510158977.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:17.760Z,1510158977.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:17.777Z,1510158977.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:18.151Z,1510158978.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:18.183Z,1510158978.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:18.567Z,1510158978.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:18.583Z,1510158978.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:18.973Z,1510158978.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:18.989Z,1510158978.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:19.368Z,1510158979.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:19.391Z,1510158979.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:19.751Z,1510158979.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:19.776Z,1510158979.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:20.151Z,1510158980.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:20.178Z,1510158980.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:20.568Z,1510158980.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:20.591Z,1510158980.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:20.967Z,1510158980.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:21.021Z,1510158981.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:21.373Z,1510158981.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:21.389Z,1510158981.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:21.752Z,1510158981.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:21.778Z,1510158981.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:22.151Z,1510158982.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:22.176Z,1510158982.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:22.572Z,1510158982.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:22.589Z,1510158982.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:22.968Z,1510158982.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:22.991Z,1510158982.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:23.368Z,1510158983.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:23.384Z,1510158983.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:23.761Z,1510158983.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:23.778Z,1510158983.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:24.151Z,1510158984.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:24.178Z,1510158984.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:24.569Z,1510158984.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:24.585Z,1510158984.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:24.974Z,1510158984.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:24.990Z,1510158984.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:25.368Z,1510158985.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:25.391Z,1510158985.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:25.752Z,1510158985.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:25.779Z,1510158985.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:26.148Z,1510158986.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:26.176Z,1510158986.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:26.570Z,1510158986.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:26.586Z,1510158986.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:26.976Z,1510158986.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:26.992Z,1510158986.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:27.369Z,1510158987.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:27.394Z,1510158987.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:27.749Z,1510158987.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:27.780Z,1510158987.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:28.148Z,1510158988.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:28.181Z,1510158988.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:28.575Z,1510158988.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:28.592Z,1510158988.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:28.967Z,1510158988.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:29.008Z,1510158989.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:29.366Z,1510158989.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:29.400Z,1510158989.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:29.757Z,1510158989.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:29.793Z,1510158989.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:30.155Z,1510158990.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:30.173Z,1510158990.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:30.562Z,1510158990.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:30.603Z,1510158990.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:30.966Z,1510158990.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:31.003Z,1510158991.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:31.366Z,1510158991.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:31.421Z,1510158991.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:31.754Z,1510158991.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:31.771Z,1510158991.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:32.150Z,1510158992.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:32.172Z,1510158992.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:32.562Z,1510158992.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:32.604Z,1510158992.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:32.965Z,1510158992.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:33.038Z,1510158993.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:33.361Z,1510158993.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:33.405Z,1510158993.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:33.751Z,1510158993.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:33.808Z,1510158993.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:34.154Z,1510158994.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:34.170Z,1510158994.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:34.561Z,1510158994.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:34.620Z,1510158994.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:34.962Z,1510158994.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:34.984Z,1510158994.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:35.361Z,1510158995.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:35.383Z,1510158995.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:35.754Z,1510158995.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:35.772Z,1510158995.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:36.153Z,1510158996.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:36.170Z,1510158996.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:36.564Z,1510158996.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:36.580Z,1510158996.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:36.966Z,1510158996.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:36.983Z,1510158996.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:37.366Z,1510158997.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:37.387Z,1510158997.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:37.757Z,1510158997.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:37.774Z,1510158997.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:38.153Z,1510158998.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:38.170Z,1510158998.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:38.566Z,1510158998.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:38.587Z,1510158998.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:38.966Z,1510158998.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:38.982Z,1510158998.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:39.367Z,1510158999.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:39.387Z,1510158999.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:39.758Z,1510158999.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:39.776Z,1510158999.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:40.157Z,1510159000.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:40.173Z,1510159000.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:40.566Z,1510159000.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:40.583Z,1510159000.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:40.966Z,1510159000.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:40.987Z,1510159000.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:41.366Z,1510159001.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:41.383Z,1510159001.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:41.754Z,1510159001.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:41.776Z,1510159001.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:42.157Z,1510159002.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:42.176Z,1510159002.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:42.566Z,1510159002.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:42.583Z,1510159002.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:42.966Z,1510159002.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:43.011Z,1510159003.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:43.366Z,1510159003.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:43.387Z,1510159003.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:43.754Z,1510159003.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:43.776Z,1510159003.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:44.154Z,1510159004.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:44.176Z,1510159004.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:44.567Z,1510159004.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:44.591Z,1510159004.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:44.966Z,1510159004.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:44.983Z,1510159004.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:45.367Z,1510159005.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:45.383Z,1510159005.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:45.758Z,1510159005.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:45.776Z,1510159005.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:46.157Z,1510159006.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:46.173Z,1510159006.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:46.567Z,1510159006.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:46.584Z,1510159006.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:46.966Z,1510159006.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:46.987Z,1510159006.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:47.366Z,1510159007.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:47.383Z,1510159007.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:47.754Z,1510159007.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:47.776Z,1510159007.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:48.157Z,1510159008.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:48.174Z,1510159008.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:48.566Z,1510159008.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:48.583Z,1510159008.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:48.966Z,1510159008.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:48.983Z,1510159008.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:49.366Z,1510159009.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:49.388Z,1510159009.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:49.755Z,1510159009.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:49.776Z,1510159009.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:50.151Z,1510159010.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:50.174Z,1510159010.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:50.566Z,1510159010.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:50.587Z,1510159010.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:50.966Z,1510159010.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:50.987Z,1510159010.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:51.366Z,1510159011.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:51.387Z,1510159011.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:51.758Z,1510159011.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:51.775Z,1510159011.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:52.155Z,1510159012.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:52.177Z,1510159012.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:52.567Z,1510159012.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:52.587Z,1510159012.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:52.966Z,1510159012.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:52.987Z,1510159012.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:53.367Z,1510159013.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:53.385Z,1510159013.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:53.748Z,1510159013.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:53.792Z,1510159013.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:54.151Z,1510159014.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:54.184Z,1510159014.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:54.572Z,1510159014.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:54.588Z,1510159014.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:54.973Z,1510159014.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:55.037Z,1510159015.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:58.044Z,1510159018.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:58.073Z,1510159018.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:58.188Z,1510159018.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:58.230Z,1510159018.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:58.588Z,1510159018.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:58.623Z,1510159018.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:58.989Z,1510159018.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:59.023Z,1510159019.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:59.388Z,1510159019.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:59.421Z,1510159019.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:36:59.801Z,1510159019.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:36:59.852Z,1510159019.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:00.202Z,1510159020.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:00.231Z,1510159020.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:00.602Z,1510159020.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:00.664Z,1510159020.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:00.984Z,1510159020.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:00.000Z,1510159021.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:01.388Z,1510159021.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:01.404Z,1510159021.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:01.788Z,1510159021.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:01.831Z,1510159021.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:02.188Z,1510159022.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:02.203Z,1510159022.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:02.602Z,1510159022.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:02.634Z,1510159022.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:03.001Z,1510159023.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:03.034Z,1510159023.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:03.401Z,1510159023.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:03.435Z,1510159023.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:03.788Z,1510159023.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:03.804Z,1510159023.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:04.188Z,1510159024.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:04.204Z,1510159024.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:04.588Z,1510159024.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:04.603Z,1510159024.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:04.989Z,1510159024.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:05.005Z,1510159025.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:05.388Z,1510159025.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:05.404Z,1510159025.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:05.801Z,1510159025.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:05.835Z,1510159025.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:06.202Z,1510159026.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:06.234Z,1510159026.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:06.602Z,1510159026.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:06.634Z,1510159026.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:06.987Z,1510159026.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:07.002Z,1510159027.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:07.388Z,1510159027.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:07.404Z,1510159027.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:07.788Z,1510159027.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:07.811Z,1510159027.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:08.193Z,1510159028.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:08.208Z,1510159028.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:08.602Z,1510159028.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:08.634Z,1510159028.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:09.005Z,1510159029.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:09.060Z,1510159029.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:09.397Z,1510159029.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:09.419Z,1510159029.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:09.793Z,1510159029.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:09.810Z,1510159029.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:10.195Z,1510159030.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:10.215Z,1510159030.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:10.597Z,1510159030.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:10.612Z,1510159030.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:10.997Z,1510159030.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:11.013Z,1510159031.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:11.386Z,1510159031.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:11.420Z,1510159031.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:11.802Z,1510159031.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:11.818Z,1510159031.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:12.203Z,1510159032.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:12.243Z,1510159032.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:12.602Z,1510159032.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:12.627Z,1510159032.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:12.995Z,1510159032.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:13.011Z,1510159033.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:13.394Z,1510159033.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:13.416Z,1510159033.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:13.794Z,1510159033.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:13.811Z,1510159033.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:14.195Z,1510159034.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:14.211Z,1510159034.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:14.600Z,1510159034.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:14.617Z,1510159034.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:15.002Z,1510159035.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:15.020Z,1510159035.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:15.403Z,1510159035.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:15.424Z,1510159035.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:15.790Z,1510159035.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:15.807Z,1510159035.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:16.191Z,1510159036.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:16.222Z,1510159036.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:16.594Z,1510159036.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:16.614Z,1510159036.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:16.989Z,1510159036.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:17.010Z,1510159037.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:17.391Z,1510159037.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:17.421Z,1510159037.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:17.803Z,1510159037.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:17.819Z,1510159037.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:18.203Z,1510159038.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:18.223Z,1510159038.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:18.603Z,1510159038.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:18.623Z,1510159038.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:18.995Z,1510159038.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:19.011Z,1510159039.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:19.386Z,1510159039.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:19.436Z,1510159039.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:19.796Z,1510159039.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:19.813Z,1510159039.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:20.184Z,1510159040.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:20.210Z,1510159040.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:20.608Z,1510159040.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:20.675Z,1510159040.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:21.006Z,1510159041.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:21.023Z,1510159041.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:21.408Z,1510159041.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:21.462Z,1510159041.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:21.788Z,1510159041.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:21.818Z,1510159041.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:22.188Z,1510159042.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:22.235Z,1510159042.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:22.584Z,1510159042.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:22.620Z,1510159042.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:22.988Z,1510159042.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:23.023Z,1510159043.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:23.388Z,1510159043.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:23.422Z,1510159043.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:23.808Z,1510159043.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:23.824Z,1510159043.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:24.206Z,1510159044.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:24.223Z,1510159044.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:24.604Z,1510159044.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:24.620Z,1510159044.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:24.984Z,1510159044.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:25.019Z,1510159045.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:25.384Z,1510159045.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:25.421Z,1510159045.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:25.789Z,1510159045.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:25.821Z,1510159045.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:26.184Z,1510159046.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:26.200Z,1510159046.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:26.594Z,1510159046.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:26.626Z,1510159046.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:27.001Z,1510159047.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:27.028Z,1510159047.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:27.401Z,1510159047.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:27.435Z,1510159047.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:27.784Z,1510159047.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:27.800Z,1510159047.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:28.188Z,1510159048.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:28.204Z,1510159048.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:28.588Z,1510159048.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:28.604Z,1510159048.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:28.988Z,1510159048.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:29.005Z,1510159049.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:29.388Z,1510159049.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:29.420Z,1510159049.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:29.801Z,1510159049.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:29.833Z,1510159049.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:30.202Z,1510159050.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:30.274Z,1510159050.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:30.602Z,1510159050.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:30.626Z,1510159050.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:30.991Z,1510159050.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:31.007Z,1510159051.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:31.387Z,1510159051.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:31.408Z,1510159051.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:31.790Z,1510159051.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:31.828Z,1510159051.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:32.188Z,1510159052.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:32.203Z,1510159052.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:32.598Z,1510159052.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:32.630Z,1510159052.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:33.005Z,1510159053.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:33.035Z,1510159053.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:33.401Z,1510159053.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:33.439Z,1510159053.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:33.787Z,1510159053.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:33.807Z,1510159053.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:34.191Z,1510159054.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:34.211Z,1510159054.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:34.591Z,1510159054.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:34.607Z,1510159054.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:34.988Z,1510159054.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:35.004Z,1510159055.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:35.391Z,1510159055.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:35.407Z,1510159055.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:35.801Z,1510159055.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:35.839Z,1510159055.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:36.202Z,1510159056.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:36.234Z,1510159056.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:36.602Z,1510159056.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:36.634Z,1510159056.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:36.991Z,1510159056.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:37.007Z,1510159057.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:37.391Z,1510159057.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:37.412Z,1510159057.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:37.792Z,1510159057.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:37.809Z,1510159057.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:38.191Z,1510159058.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:38.207Z,1510159058.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:38.602Z,1510159058.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:38.618Z,1510159058.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:39.002Z,1510159059.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:39.018Z,1510159059.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:39.400Z,1510159059.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:39.416Z,1510159059.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:39.794Z,1510159059.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:39.810Z,1510159059.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:40.192Z,1510159060.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:40.212Z,1510159060.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:40.594Z,1510159060.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:40.651Z,1510159060.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:40.989Z,1510159060.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:41.010Z,1510159061.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:41.393Z,1510159061.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:41.409Z,1510159061.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:41.796Z,1510159061.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:41.813Z,1510159061.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:42.206Z,1510159062.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:42.240Z,1510159062.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:42.602Z,1510159062.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:42.648Z,1510159062.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:42.994Z,1510159062.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:43.010Z,1510159063.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:43.395Z,1510159063.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:43.448Z,1510159063.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:43.795Z,1510159063.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:43.812Z,1510159063.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:44.195Z,1510159064.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:44.241Z,1510159064.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:44.602Z,1510159064.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:44.618Z,1510159064.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:45.001Z,1510159065.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:45.018Z,1510159065.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:45.400Z,1510159065.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:45.416Z,1510159065.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:45.789Z,1510159065.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:45.810Z,1510159065.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:46.192Z,1510159066.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:46.213Z,1510159066.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:46.593Z,1510159066.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:46.609Z,1510159066.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:46.993Z,1510159066.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:47.013Z,1510159067.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:47.397Z,1510159067.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:47.413Z,1510159067.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:47.802Z,1510159067.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:47.818Z,1510159067.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:48.204Z,1510159068.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:48.293Z,1510159068.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:48.603Z,1510159068.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:48.619Z,1510159068.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:48.996Z,1510159068.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:49.012Z,1510159069.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:49.395Z,1510159069.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:49.413Z,1510159069.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:49.795Z,1510159069.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:49.813Z,1510159069.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:50.193Z,1510159070.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:50.225Z,1510159070.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:50.599Z,1510159070.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:50.617Z,1510159070.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:51.002Z,1510159071.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:51.019Z,1510159071.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:51.402Z,1510159071.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:51.425Z,1510159071.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:51.790Z,1510159071.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:51.807Z,1510159071.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:52.194Z,1510159072.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:52.210Z,1510159072.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:52.593Z,1510159072.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:52.654Z,1510159072.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:52.995Z,1510159072.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:53.012Z,1510159073.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:53.387Z,1510159073.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:53.414Z,1510159073.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:53.802Z,1510159073.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:53.820Z,1510159073.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:54.206Z,1510159074.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:54.225Z,1510159074.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:54.602Z,1510159074.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:54.624Z,1510159074.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:54.627Z,1510159074.627 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T16:37:54.627Z,1510159074.627 [Default:CheckIn:C.Wait] Stopped
2017-11-08T16:37:54.627Z,1510159074.627 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T16:37:54.627Z,1510159074.627 [Default:CheckIn:D] Running Loop=1
2017-11-08T16:37:54.995Z,1510159074.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:55.012Z,1510159075.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:55.015Z,1510159075.015 [Default:CheckIn:D] Stopped
2017-11-08T16:37:55.015Z,1510159075.015 [Default:CheckIn:E] Running Loop=1
2017-11-08T16:37:58.091Z,1510159078.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:58.159Z,1510159078.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:58.167Z,1510159078.167 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 191.233919 min 
2017-11-08T16:37:58.167Z,1510159078.167 [Default:CheckIn:E] Stopped
2017-11-08T16:37:58.167Z,1510159078.167 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T16:37:58.167Z,1510159078.167 [Default:CheckIn] Stopped
2017-11-08T16:37:58.168Z,1510159078.168 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T16:37:58.168Z,1510159078.168 [Default:CheckIn](INFO): Running loop #7
2017-11-08T16:37:58.168Z,1510159078.168 [Default:CheckIn] Running Loop=7
2017-11-08T16:37:58.168Z,1510159078.168 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T16:37:58.168Z,1510159078.168 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T16:37:58.283Z,1510159078.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:58.331Z,1510159078.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:58.702Z,1510159078.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:58.719Z,1510159078.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:59.100Z,1510159079.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:59.118Z,1510159079.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:59.500Z,1510159079.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:59.518Z,1510159079.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:37:59.881Z,1510159079.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:37:59.921Z,1510159079.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:00.280Z,1510159080.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:00.310Z,1510159080.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:00.679Z,1510159080.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:00.710Z,1510159080.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:01.081Z,1510159081.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:01.109Z,1510159081.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:01.479Z,1510159081.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:01.511Z,1510159081.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:01.896Z,1510159081.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:01.913Z,1510159081.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:02.300Z,1510159082.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:02.317Z,1510159082.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:02.694Z,1510159082.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:02.716Z,1510159082.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:03.079Z,1510159083.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:03.109Z,1510159083.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:03.480Z,1510159083.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:03.517Z,1510159083.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:03.876Z,1510159083.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:03.913Z,1510159083.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:04.275Z,1510159084.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:04.313Z,1510159084.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:04.694Z,1510159084.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:04.727Z,1510159084.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:05.093Z,1510159085.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:05.158Z,1510159085.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:05.485Z,1510159085.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:05.517Z,1510159085.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:05.880Z,1510159085.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:05.935Z,1510159085.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:06.279Z,1510159086.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:06.320Z,1510159086.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:06.679Z,1510159086.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:06.695Z,1510159086.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:07.080Z,1510159087.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:07.105Z,1510159087.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:07.475Z,1510159087.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:07.495Z,1510159087.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:07.885Z,1510159087.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:07.925Z,1510159087.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:08.294Z,1510159088.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:08.320Z,1510159088.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:08.690Z,1510159088.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:08.721Z,1510159088.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:09.075Z,1510159089.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:09.091Z,1510159089.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:09.480Z,1510159089.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:09.496Z,1510159089.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:09.880Z,1510159089.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:09.897Z,1510159089.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:10.283Z,1510159090.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:10.298Z,1510159090.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:10.694Z,1510159090.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:10.719Z,1510159090.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:11.098Z,1510159091.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:11.121Z,1510159091.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:11.489Z,1510159091.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:11.517Z,1510159091.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:11.879Z,1510159091.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:11.895Z,1510159091.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:12.283Z,1510159092.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:12.300Z,1510159092.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:12.683Z,1510159092.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:12.699Z,1510159092.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:13.079Z,1510159093.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:13.099Z,1510159093.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:13.476Z,1510159093.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:13.505Z,1510159093.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:13.893Z,1510159093.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:13.909Z,1510159093.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:14.293Z,1510159094.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:14.339Z,1510159094.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:14.690Z,1510159094.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:14.706Z,1510159094.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:15.082Z,1510159095.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:15.098Z,1510159095.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:15.483Z,1510159095.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:15.503Z,1510159095.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:15.880Z,1510159095.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:15.897Z,1510159095.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:16.282Z,1510159096.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:16.298Z,1510159096.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:16.694Z,1510159096.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:16.710Z,1510159096.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:17.090Z,1510159097.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:17.106Z,1510159097.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:17.493Z,1510159097.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:17.534Z,1510159097.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:17.883Z,1510159097.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:17.903Z,1510159097.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:18.282Z,1510159098.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:18.299Z,1510159098.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:18.682Z,1510159098.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:18.698Z,1510159098.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:19.083Z,1510159099.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:19.099Z,1510159099.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:19.481Z,1510159099.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:19.497Z,1510159099.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:19.893Z,1510159099.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:19.910Z,1510159099.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:20.293Z,1510159100.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:20.310Z,1510159100.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:20.686Z,1510159100.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:20.702Z,1510159100.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:21.082Z,1510159101.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:21.097Z,1510159101.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:21.483Z,1510159101.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:21.499Z,1510159101.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:21.880Z,1510159101.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:21.897Z,1510159101.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:22.282Z,1510159102.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:22.298Z,1510159102.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:22.694Z,1510159102.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:22.710Z,1510159102.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:23.094Z,1510159103.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:23.110Z,1510159103.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:23.493Z,1510159103.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:23.535Z,1510159103.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:23.883Z,1510159103.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:23.899Z,1510159103.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:24.282Z,1510159104.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:24.299Z,1510159104.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:24.682Z,1510159104.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:24.698Z,1510159104.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:25.083Z,1510159105.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:25.100Z,1510159105.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:25.480Z,1510159105.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:25.496Z,1510159105.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:25.886Z,1510159105.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:25.902Z,1510159105.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:26.294Z,1510159106.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:26.340Z,1510159106.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:26.690Z,1510159106.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:26.762Z,1510159106.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:27.085Z,1510159107.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:27.101Z,1510159107.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:27.479Z,1510159107.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:27.502Z,1510159107.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:27.886Z,1510159107.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:27.939Z,1510159107.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:28.281Z,1510159108.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:28.303Z,1510159108.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:28.694Z,1510159108.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:28.743Z,1510159108.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:29.094Z,1510159109.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:29.110Z,1510159109.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:29.490Z,1510159109.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:29.506Z,1510159109.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:29.886Z,1510159109.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:29.902Z,1510159109.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:30.281Z,1510159110.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:30.297Z,1510159110.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:30.686Z,1510159110.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:30.702Z,1510159110.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:31.087Z,1510159111.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:31.103Z,1510159111.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:31.479Z,1510159111.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:31.501Z,1510159111.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:31.892Z,1510159111.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:31.908Z,1510159111.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:32.294Z,1510159112.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:32.310Z,1510159112.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:32.691Z,1510159112.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:32.711Z,1510159112.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:33.086Z,1510159113.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:33.102Z,1510159113.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:33.486Z,1510159113.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:33.503Z,1510159113.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:33.879Z,1510159113.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:33.910Z,1510159113.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:34.290Z,1510159114.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:34.306Z,1510159114.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:34.692Z,1510159114.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:34.709Z,1510159114.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:35.092Z,1510159115.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:35.108Z,1510159115.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:35.491Z,1510159115.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:35.511Z,1510159115.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:35.889Z,1510159115.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:35.906Z,1510159115.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:36.280Z,1510159116.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:36.311Z,1510159116.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:36.687Z,1510159116.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:36.703Z,1510159116.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:37.084Z,1510159117.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:37.143Z,1510159117.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:37.487Z,1510159117.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:37.505Z,1510159117.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:37.891Z,1510159117.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:37.915Z,1510159117.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:38.291Z,1510159118.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:38.315Z,1510159118.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:38.691Z,1510159118.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:38.712Z,1510159118.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:39.086Z,1510159119.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:39.102Z,1510159119.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:39.482Z,1510159119.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:39.499Z,1510159119.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:39.881Z,1510159119.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:39.898Z,1510159119.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:40.285Z,1510159120.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:40.301Z,1510159120.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:40.695Z,1510159120.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:40.711Z,1510159120.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:41.095Z,1510159121.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:41.112Z,1510159121.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:41.494Z,1510159121.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:41.510Z,1510159121.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:41.882Z,1510159121.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:41.898Z,1510159121.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:42.279Z,1510159122.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:42.300Z,1510159122.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:42.685Z,1510159122.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:42.701Z,1510159122.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:43.083Z,1510159123.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:43.103Z,1510159123.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:43.479Z,1510159123.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:43.500Z,1510159123.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:43.894Z,1510159123.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:43.910Z,1510159123.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:44.294Z,1510159124.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:44.310Z,1510159124.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:44.694Z,1510159124.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:44.711Z,1510159124.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:45.081Z,1510159125.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:45.103Z,1510159125.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:45.482Z,1510159125.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:45.503Z,1510159125.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:45.879Z,1510159125.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:45.900Z,1510159125.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:46.285Z,1510159126.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:46.307Z,1510159126.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:46.695Z,1510159126.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:46.711Z,1510159126.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:47.095Z,1510159127.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:47.116Z,1510159127.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:47.491Z,1510159127.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:47.511Z,1510159127.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:47.878Z,1510159127.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:47.907Z,1510159127.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:48.286Z,1510159128.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:48.302Z,1510159128.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:48.685Z,1510159128.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:48.747Z,1510159128.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:49.075Z,1510159129.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:49.107Z,1510159129.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:49.475Z,1510159129.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:49.528Z,1510159129.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:49.895Z,1510159129.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:49.911Z,1510159129.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:50.296Z,1510159130.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:50.319Z,1510159130.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:50.689Z,1510159130.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:50.747Z,1510159130.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:51.079Z,1510159131.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:51.103Z,1510159131.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:51.479Z,1510159131.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:51.528Z,1510159131.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:51.880Z,1510159131.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:51.905Z,1510159131.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:52.275Z,1510159132.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:52.299Z,1510159132.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:52.699Z,1510159132.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:52.715Z,1510159132.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:53.099Z,1510159133.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:53.115Z,1510159133.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:53.491Z,1510159133.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:53.506Z,1510159133.506 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:53.507Z,1510159133.507 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65
2017-11-08T16:38:53.507Z,1510159133.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T16:38:53.508Z,1510159133.508 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:53.509Z,1510159133.509 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65
2017-11-08T16:38:53.509Z,1510159133.509 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T16:38:53.510Z,1510159133.510 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:53.510Z,1510159133.510 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 65
2017-11-08T16:38:53.510Z,1510159133.510 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T16:38:53.581Z,1510159133.581 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T16:38:53.581Z,1510159133.581 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T16:38:53.581Z,1510159133.581 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T16:38:53.894Z,1510159133.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:53.993Z,1510159133.993 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T16:38:53.993Z,1510159133.993 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65
2017-11-08T16:38:53.993Z,1510159133.993 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T16:38:53.993Z,1510159133.993 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65
2017-11-08T16:38:53.994Z,1510159133.994 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T16:38:53.994Z,1510159133.994 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 65
2017-11-08T16:38:54.275Z,1510159134.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:54.309Z,1510159134.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T16:38:54.309Z,1510159134.309 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:38:54.309Z,1510159134.309 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:38:54.310Z,1510159134.310 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T16:38:54.310Z,1510159134.310 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:38:54.311Z,1510159134.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:38:54.311Z,1510159134.311 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T16:38:54.311Z,1510159134.311 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:38:54.312Z,1510159134.312 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:38:54.679Z,1510159134.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:54.719Z,1510159134.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T16:38:54.720Z,1510159134.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:55.080Z,1510159135.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:55.095Z,1510159135.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T16:38:55.120Z,1510159135.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:58.200Z,1510159138.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:58.224Z,1510159138.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2017-11-08T16:38:58.225Z,1510159138.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:58.361Z,1510159138.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:58.395Z,1510159138.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-08T16:38:58.396Z,1510159138.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:58.760Z,1510159138.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:58.776Z,1510159138.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-08T16:38:58.777Z,1510159138.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:59.156Z,1510159139.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:59.171Z,1510159139.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-08T16:38:59.173Z,1510159139.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:59.531Z,1510159139.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:59.577Z,1510159139.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-08T16:38:59.578Z,1510159139.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:38:59.932Z,1510159139.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:38:59.947Z,1510159139.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T16:38:59.965Z,1510159139.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:00.335Z,1510159140.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:00.375Z,1510159140.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T16:39:00.376Z,1510159140.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:00.745Z,1510159140.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:00.775Z,1510159140.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-11-08T16:39:00.776Z,1510159140.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:01.149Z,1510159141.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:01.175Z,1510159141.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T16:39:01.176Z,1510159141.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:01.550Z,1510159141.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:01.579Z,1510159141.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T16:39:01.580Z,1510159141.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:01.931Z,1510159141.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:01.946Z,1510159141.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T16:39:01.947Z,1510159141.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:02.331Z,1510159142.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:02.347Z,1510159142.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T16:39:02.348Z,1510159142.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:02.736Z,1510159142.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:02.774Z,1510159142.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T16:39:02.775Z,1510159142.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:03.135Z,1510159143.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:03.150Z,1510159143.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T16:39:03.151Z,1510159143.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:03.545Z,1510159143.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:03.578Z,1510159143.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T16:39:03.579Z,1510159143.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:03.949Z,1510159143.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:03.975Z,1510159143.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T16:39:03.977Z,1510159143.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:04.345Z,1510159144.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:04.371Z,1510159144.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T16:39:04.372Z,1510159144.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:04.736Z,1510159144.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:04.751Z,1510159144.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T16:39:04.752Z,1510159144.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:05.135Z,1510159145.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:05.176Z,1510159145.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T16:39:05.177Z,1510159145.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:05.546Z,1510159145.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:05.571Z,1510159145.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T16:39:05.572Z,1510159145.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:05.945Z,1510159145.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:05.972Z,1510159145.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T16:39:05.973Z,1510159145.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:06.350Z,1510159146.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:06.379Z,1510159146.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T16:39:06.380Z,1510159146.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:06.736Z,1510159146.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:06.752Z,1510159146.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T16:39:06.765Z,1510159146.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:07.135Z,1510159147.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:07.150Z,1510159147.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T16:39:07.151Z,1510159147.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:07.550Z,1510159147.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:07.575Z,1510159147.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T16:39:07.575Z,1510159147.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:07.950Z,1510159147.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:07.975Z,1510159147.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T16:39:07.976Z,1510159147.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:08.349Z,1510159148.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:08.379Z,1510159148.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T16:39:08.380Z,1510159148.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:08.736Z,1510159148.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:08.752Z,1510159148.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T16:39:08.753Z,1510159148.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:09.137Z,1510159149.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:09.159Z,1510159149.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T16:39:09.160Z,1510159149.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:09.549Z,1510159149.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:09.587Z,1510159149.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T16:39:09.588Z,1510159149.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:09.950Z,1510159149.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:09.982Z,1510159149.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T16:39:09.983Z,1510159149.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:10.350Z,1510159150.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:10.366Z,1510159150.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T16:39:10.367Z,1510159150.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:10.739Z,1510159150.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:10.759Z,1510159150.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T16:39:10.760Z,1510159150.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:11.138Z,1510159151.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:11.154Z,1510159151.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T16:39:11.155Z,1510159151.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:11.550Z,1510159151.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:11.640Z,1510159151.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T16:39:11.641Z,1510159151.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:11.951Z,1510159151.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:11.966Z,1510159151.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T16:39:11.967Z,1510159151.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:12.350Z,1510159152.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:12.371Z,1510159152.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T16:39:12.372Z,1510159152.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:12.742Z,1510159152.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:12.794Z,1510159152.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T16:39:12.795Z,1510159152.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:13.142Z,1510159153.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:13.157Z,1510159153.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-08T16:39:13.158Z,1510159153.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:13.550Z,1510159153.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:13.602Z,1510159153.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:13.950Z,1510159153.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:13.971Z,1510159153.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:14.351Z,1510159154.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:14.366Z,1510159154.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:14.742Z,1510159154.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:14.758Z,1510159154.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:15.139Z,1510159155.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:15.160Z,1510159155.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:15.551Z,1510159155.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:15.567Z,1510159155.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:15.950Z,1510159155.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:15.972Z,1510159155.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:16.351Z,1510159156.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:16.367Z,1510159156.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:16.744Z,1510159156.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:16.760Z,1510159156.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:17.142Z,1510159157.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:17.158Z,1510159157.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:17.551Z,1510159157.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:17.572Z,1510159157.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:17.952Z,1510159157.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:17.968Z,1510159157.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:18.351Z,1510159158.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:18.368Z,1510159158.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:18.747Z,1510159158.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:18.767Z,1510159158.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:19.144Z,1510159159.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:19.160Z,1510159159.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:19.549Z,1510159159.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:19.565Z,1510159159.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:19.951Z,1510159159.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:19.968Z,1510159159.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:20.354Z,1510159160.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:20.369Z,1510159160.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:20.744Z,1510159160.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:20.761Z,1510159160.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:21.147Z,1510159161.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:21.164Z,1510159161.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:21.553Z,1510159161.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:21.569Z,1510159161.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:21.953Z,1510159161.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:22.003Z,1510159162.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:22.351Z,1510159162.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:22.371Z,1510159162.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:22.743Z,1510159162.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:22.761Z,1510159162.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:23.142Z,1510159163.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:23.161Z,1510159163.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:23.550Z,1510159163.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:23.568Z,1510159163.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:23.951Z,1510159163.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:23.968Z,1510159163.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:24.348Z,1510159164.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:24.364Z,1510159164.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:24.739Z,1510159164.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:24.771Z,1510159164.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:25.142Z,1510159165.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:25.158Z,1510159165.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:25.550Z,1510159165.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:25.567Z,1510159165.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:25.950Z,1510159165.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:25.968Z,1510159165.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:26.351Z,1510159166.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:26.367Z,1510159166.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:26.742Z,1510159166.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:26.758Z,1510159166.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:27.141Z,1510159167.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:27.157Z,1510159167.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:27.551Z,1510159167.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:27.567Z,1510159167.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:27.950Z,1510159167.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:27.966Z,1510159167.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:28.350Z,1510159168.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:28.366Z,1510159168.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:28.738Z,1510159168.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:28.754Z,1510159168.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:29.141Z,1510159169.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:29.163Z,1510159169.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:29.550Z,1510159169.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:29.567Z,1510159169.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:29.950Z,1510159169.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:29.967Z,1510159169.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:30.350Z,1510159170.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:30.366Z,1510159170.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:30.742Z,1510159170.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:30.758Z,1510159170.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:31.142Z,1510159171.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:31.158Z,1510159171.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:31.548Z,1510159171.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:31.565Z,1510159171.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:31.950Z,1510159171.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:31.972Z,1510159171.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:32.351Z,1510159172.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:32.371Z,1510159172.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:32.738Z,1510159172.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:32.755Z,1510159172.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:33.139Z,1510159173.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:33.160Z,1510159173.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:33.551Z,1510159173.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:33.571Z,1510159173.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:33.951Z,1510159173.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:33.967Z,1510159173.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:34.350Z,1510159174.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:34.435Z,1510159174.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:34.742Z,1510159174.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:34.758Z,1510159174.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:35.141Z,1510159175.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:35.197Z,1510159175.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:35.551Z,1510159175.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:35.571Z,1510159175.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:35.951Z,1510159175.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:35.996Z,1510159175.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:36.351Z,1510159176.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:36.367Z,1510159176.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:36.739Z,1510159176.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:36.761Z,1510159176.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:37.131Z,1510159177.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:37.156Z,1510159177.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:37.551Z,1510159177.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:37.568Z,1510159177.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:37.954Z,1510159177.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:37.970Z,1510159177.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:38.352Z,1510159178.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:38.367Z,1510159178.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:38.742Z,1510159178.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:38.763Z,1510159178.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:39.139Z,1510159179.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:39.160Z,1510159179.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:39.555Z,1510159179.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:39.571Z,1510159179.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:39.952Z,1510159179.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:39.968Z,1510159179.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:40.351Z,1510159180.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:40.368Z,1510159180.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:40.742Z,1510159180.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:40.758Z,1510159180.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:41.141Z,1510159181.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:41.157Z,1510159181.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:41.554Z,1510159181.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:41.571Z,1510159181.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:41.954Z,1510159181.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:41.970Z,1510159181.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:42.346Z,1510159182.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:42.366Z,1510159182.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:42.739Z,1510159182.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:42.761Z,1510159182.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:43.142Z,1510159183.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:43.158Z,1510159183.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:43.546Z,1510159183.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:43.566Z,1510159183.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:43.954Z,1510159183.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:43.970Z,1510159183.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:44.355Z,1510159184.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:44.398Z,1510159184.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:44.742Z,1510159184.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:44.758Z,1510159184.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:45.141Z,1510159185.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:45.157Z,1510159185.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:45.555Z,1510159185.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:45.575Z,1510159185.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:45.951Z,1510159185.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:45.968Z,1510159185.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:46.351Z,1510159186.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:46.371Z,1510159186.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:46.742Z,1510159186.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:46.758Z,1510159186.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:47.141Z,1510159187.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:47.163Z,1510159187.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:47.554Z,1510159187.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:47.571Z,1510159187.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:47.954Z,1510159187.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:47.970Z,1510159187.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:48.346Z,1510159188.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:48.366Z,1510159188.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:48.742Z,1510159188.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:48.758Z,1510159188.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:49.142Z,1510159189.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:49.158Z,1510159189.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:49.546Z,1510159189.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:49.566Z,1510159189.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:49.954Z,1510159189.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:49.971Z,1510159189.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:50.355Z,1510159190.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:50.370Z,1510159190.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:50.742Z,1510159190.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:50.758Z,1510159190.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:51.141Z,1510159191.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:51.157Z,1510159191.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:51.555Z,1510159191.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:51.575Z,1510159191.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:51.955Z,1510159191.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:51.976Z,1510159191.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:52.351Z,1510159192.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:52.368Z,1510159192.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:52.743Z,1510159192.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:52.758Z,1510159192.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:53.131Z,1510159193.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:53.166Z,1510159193.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:53.551Z,1510159193.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:53.572Z,1510159193.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:53.954Z,1510159193.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:53.970Z,1510159193.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:54.353Z,1510159194.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:54.369Z,1510159194.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:54.745Z,1510159194.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:54.762Z,1510159194.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:55.142Z,1510159195.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:55.159Z,1510159195.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:58.239Z,1510159198.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:58.327Z,1510159198.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:58.470Z,1510159198.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:58.505Z,1510159198.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:58.866Z,1510159198.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:58.882Z,1510159198.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:59.256Z,1510159199.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:59.315Z,1510159199.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:39:59.654Z,1510159199.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:39:59.670Z,1510159199.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:00.056Z,1510159200.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:00.107Z,1510159200.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:00.451Z,1510159200.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:00.472Z,1510159200.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:00.862Z,1510159200.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:00.878Z,1510159200.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:01.265Z,1510159201.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:01.281Z,1510159201.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:01.656Z,1510159201.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:01.673Z,1510159201.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:02.055Z,1510159202.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:02.071Z,1510159202.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:02.453Z,1510159202.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:02.468Z,1510159202.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:02.855Z,1510159202.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:02.875Z,1510159202.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:03.254Z,1510159203.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:03.271Z,1510159203.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:03.659Z,1510159203.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:03.679Z,1510159203.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:04.058Z,1510159204.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:04.074Z,1510159204.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:04.466Z,1510159204.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:04.482Z,1510159204.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:04.856Z,1510159204.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:04.872Z,1510159204.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:05.255Z,1510159205.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:05.275Z,1510159205.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:05.655Z,1510159205.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:05.672Z,1510159205.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:06.055Z,1510159206.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:06.071Z,1510159206.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:06.446Z,1510159206.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:06.482Z,1510159206.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:06.859Z,1510159206.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:06.876Z,1510159206.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:07.269Z,1510159207.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:07.304Z,1510159207.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:07.658Z,1510159207.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:07.674Z,1510159207.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:08.057Z,1510159208.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:08.074Z,1510159208.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:08.458Z,1510159208.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:08.507Z,1510159208.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:08.851Z,1510159208.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:08.874Z,1510159208.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:09.255Z,1510159209.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:09.276Z,1510159209.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:09.667Z,1510159209.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:09.684Z,1510159209.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:10.063Z,1510159210.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:10.080Z,1510159210.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:10.462Z,1510159210.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:10.479Z,1510159210.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:10.854Z,1510159210.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:10.870Z,1510159210.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:11.256Z,1510159211.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:11.274Z,1510159211.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:11.657Z,1510159211.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:11.675Z,1510159211.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:12.058Z,1510159212.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:12.075Z,1510159212.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:12.452Z,1510159212.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:12.470Z,1510159212.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:12.859Z,1510159212.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:12.877Z,1510159212.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:13.262Z,1510159213.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:13.280Z,1510159213.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:13.662Z,1510159213.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:13.682Z,1510159213.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:14.054Z,1510159214.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:14.070Z,1510159214.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:14.455Z,1510159214.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:14.476Z,1510159214.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:14.856Z,1510159214.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:14.873Z,1510159214.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:15.255Z,1510159215.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:15.271Z,1510159215.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:15.666Z,1510159215.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:15.709Z,1510159215.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:16.059Z,1510159216.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:16.076Z,1510159216.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:16.459Z,1510159216.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:16.480Z,1510159216.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:16.857Z,1510159216.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:16.873Z,1510159216.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:17.254Z,1510159217.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:17.270Z,1510159217.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:17.652Z,1510159217.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:17.670Z,1510159217.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:18.054Z,1510159218.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:18.082Z,1510159218.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:18.452Z,1510159218.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:18.469Z,1510159218.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:18.865Z,1510159218.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:18.907Z,1510159218.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:19.262Z,1510159219.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:19.280Z,1510159219.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:19.659Z,1510159219.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:19.668Z,1510159219.668 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T16:40:19.668Z,1510159219.668 [BPC1] Data Fault, FailCount= 1
2017-11-08T16:40:19.668Z,1510159219.668 [BPC1](ERROR): Data Fault
2017-11-08T16:40:19.678Z,1510159219.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:19.781Z,1510159219.781 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T16:40:20.051Z,1510159220.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:20.071Z,1510159220.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:20.454Z,1510159220.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:20.470Z,1510159220.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:20.855Z,1510159220.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:20.872Z,1510159220.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:20.949Z,1510159220.949 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T16:40:20.949Z,1510159220.949 [BPC1] No Fault, FailCount= 1
2017-11-08T16:40:21.252Z,1510159221.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:21.316Z,1510159221.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:21.662Z,1510159221.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:21.678Z,1510159221.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:22.066Z,1510159222.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:22.082Z,1510159222.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:22.461Z,1510159222.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:22.477Z,1510159222.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:22.853Z,1510159222.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:22.880Z,1510159222.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:23.251Z,1510159223.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:23.267Z,1510159223.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:23.658Z,1510159223.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:23.675Z,1510159223.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:24.057Z,1510159224.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:24.074Z,1510159224.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:24.448Z,1510159224.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:24.479Z,1510159224.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:24.831Z,1510159224.831 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T16:40:24.831Z,1510159224.831 [NAL9602] Data Fault, FailCount= 4
2017-11-08T16:40:24.831Z,1510159224.831 [NAL9602](ERROR): Data Fault
2017-11-08T16:40:24.865Z,1510159224.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:24.881Z,1510159224.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:24.977Z,1510159224.977 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T16:40:25.230Z,1510159225.230 [NAL9602](INFO): Powering down
2017-11-08T16:40:25.260Z,1510159225.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:25.276Z,1510159225.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:25.650Z,1510159225.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:25.669Z,1510159225.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:26.052Z,1510159226.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:26.068Z,1510159226.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:26.149Z,1510159226.149 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T16:40:26.149Z,1510159226.149 [NAL9602] No Fault, FailCount= 4
2017-11-08T16:40:26.455Z,1510159226.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:26.476Z,1510159226.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:26.851Z,1510159226.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:26.867Z,1510159226.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:27.249Z,1510159227.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:27.268Z,1510159227.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:27.654Z,1510159227.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:27.674Z,1510159227.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:28.050Z,1510159228.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:28.067Z,1510159228.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:28.452Z,1510159228.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:28.468Z,1510159228.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:28.855Z,1510159228.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:28.872Z,1510159228.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:29.256Z,1510159229.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:29.272Z,1510159229.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:29.650Z,1510159229.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:29.705Z,1510159229.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:30.057Z,1510159230.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:30.073Z,1510159230.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:30.449Z,1510159230.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:30.469Z,1510159230.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:30.852Z,1510159230.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:30.871Z,1510159230.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:31.253Z,1510159231.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:31.278Z,1510159231.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:31.656Z,1510159231.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:31.673Z,1510159231.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:32.050Z,1510159232.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:32.068Z,1510159232.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:32.452Z,1510159232.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:32.483Z,1510159232.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:32.851Z,1510159232.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:32.867Z,1510159232.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:33.252Z,1510159233.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:33.268Z,1510159233.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:33.654Z,1510159233.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:33.672Z,1510159233.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:34.052Z,1510159234.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:34.068Z,1510159234.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:34.450Z,1510159234.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:34.466Z,1510159234.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:34.853Z,1510159234.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:34.869Z,1510159234.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:35.254Z,1510159235.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:35.271Z,1510159235.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:35.652Z,1510159235.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:35.668Z,1510159235.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:36.055Z,1510159236.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:36.071Z,1510159236.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:36.451Z,1510159236.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:36.467Z,1510159236.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:36.855Z,1510159236.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:36.872Z,1510159236.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:37.255Z,1510159237.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:37.271Z,1510159237.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:37.655Z,1510159237.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:37.671Z,1510159237.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:38.053Z,1510159238.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:38.069Z,1510159238.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:38.455Z,1510159238.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:38.472Z,1510159238.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:38.856Z,1510159238.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:38.872Z,1510159238.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:39.251Z,1510159239.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:39.271Z,1510159239.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:39.653Z,1510159239.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:39.670Z,1510159239.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:40.055Z,1510159240.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:40.072Z,1510159240.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:40.447Z,1510159240.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:40.475Z,1510159240.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:40.850Z,1510159240.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:40.866Z,1510159240.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:41.257Z,1510159241.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:41.273Z,1510159241.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:41.650Z,1510159241.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:41.723Z,1510159241.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:42.050Z,1510159242.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:42.071Z,1510159242.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:42.450Z,1510159242.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:42.509Z,1510159242.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:42.856Z,1510159242.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:42.872Z,1510159242.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:43.255Z,1510159243.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:43.315Z,1510159243.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:43.653Z,1510159243.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:43.669Z,1510159243.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:44.052Z,1510159244.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:44.067Z,1510159244.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:44.454Z,1510159244.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:44.470Z,1510159244.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:44.851Z,1510159244.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:44.870Z,1510159244.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:45.253Z,1510159245.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:45.275Z,1510159245.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:45.655Z,1510159245.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:45.672Z,1510159245.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:46.054Z,1510159246.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:46.070Z,1510159246.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:46.453Z,1510159246.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:46.470Z,1510159246.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:46.853Z,1510159246.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:46.873Z,1510159246.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:47.257Z,1510159247.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:47.274Z,1510159247.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:47.656Z,1510159247.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:47.671Z,1510159247.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:48.053Z,1510159248.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:48.071Z,1510159248.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:48.454Z,1510159248.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:48.470Z,1510159248.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:48.852Z,1510159248.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:48.868Z,1510159248.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:49.253Z,1510159249.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:49.270Z,1510159249.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:49.650Z,1510159249.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:49.671Z,1510159249.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:50.050Z,1510159250.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:50.072Z,1510159250.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:50.451Z,1510159250.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:50.468Z,1510159250.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:50.853Z,1510159250.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:50.870Z,1510159250.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:51.251Z,1510159251.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:51.276Z,1510159251.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:51.652Z,1510159251.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:51.702Z,1510159251.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:52.053Z,1510159252.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:52.069Z,1510159252.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:52.457Z,1510159252.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:52.473Z,1510159252.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:52.857Z,1510159252.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:52.874Z,1510159252.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:53.245Z,1510159253.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:53.272Z,1510159253.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:53.652Z,1510159253.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:53.668Z,1510159253.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:54.057Z,1510159254.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:54.073Z,1510159254.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:54.443Z,1510159254.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:54.484Z,1510159254.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:54.856Z,1510159254.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:54.872Z,1510159254.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:55.235Z,1510159255.235 [NAL9602](INFO): Powering up NAL9602
2017-11-08T16:40:55.263Z,1510159255.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:55.280Z,1510159255.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:58.332Z,1510159258.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:58.371Z,1510159258.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:58.483Z,1510159258.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:58.518Z,1510159258.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:58.879Z,1510159258.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:58.895Z,1510159258.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:59.287Z,1510159259.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:59.318Z,1510159259.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:40:59.673Z,1510159259.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:40:59.689Z,1510159259.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:00.074Z,1510159260.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:00.090Z,1510159260.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:00.474Z,1510159260.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:00.491Z,1510159260.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:00.883Z,1510159260.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:00.916Z,1510159260.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:01.274Z,1510159261.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:01.290Z,1510159261.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:01.678Z,1510159261.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:01.694Z,1510159261.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:02.075Z,1510159262.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:02.091Z,1510159262.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:02.475Z,1510159262.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:02.495Z,1510159262.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:02.875Z,1510159262.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:02.891Z,1510159262.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:03.275Z,1510159263.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:03.346Z,1510159263.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:03.675Z,1510159263.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:03.743Z,1510159263.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:04.078Z,1510159264.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:04.094Z,1510159264.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:04.475Z,1510159264.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:04.525Z,1510159264.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:04.879Z,1510159264.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:04.894Z,1510159264.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:05.279Z,1510159265.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:05.331Z,1510159265.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:05.689Z,1510159265.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:05.721Z,1510159265.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:06.062Z,1510159266.062 [NAL9602](INFO): NAL9602 initialized
2017-11-08T16:41:06.080Z,1510159266.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:06.096Z,1510159266.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:06.478Z,1510159266.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:06.494Z,1510159266.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:06.885Z,1510159266.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:06.901Z,1510159266.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:07.290Z,1510159267.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:07.326Z,1510159267.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:07.689Z,1510159267.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:07.706Z,1510159267.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:08.078Z,1510159268.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:08.094Z,1510159268.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:08.476Z,1510159268.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:08.492Z,1510159268.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:08.879Z,1510159268.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:08.895Z,1510159268.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:09.278Z,1510159269.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:09.299Z,1510159269.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:09.678Z,1510159269.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:09.695Z,1510159269.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:10.089Z,1510159270.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:10.106Z,1510159270.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:10.493Z,1510159270.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:10.531Z,1510159270.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:10.890Z,1510159270.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:10.931Z,1510159270.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:11.278Z,1510159271.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:11.295Z,1510159271.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:11.677Z,1510159271.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:11.693Z,1510159271.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:12.079Z,1510159272.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:12.099Z,1510159272.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:12.479Z,1510159272.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:12.495Z,1510159272.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:12.885Z,1510159272.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:12.901Z,1510159272.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:13.290Z,1510159273.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:13.306Z,1510159273.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:13.694Z,1510159273.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:13.747Z,1510159273.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:14.077Z,1510159274.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:14.093Z,1510159274.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:14.476Z,1510159274.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:14.493Z,1510159274.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:14.878Z,1510159274.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:14.895Z,1510159274.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:15.279Z,1510159275.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:15.295Z,1510159275.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:15.676Z,1510159275.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:15.693Z,1510159275.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:16.090Z,1510159276.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:16.106Z,1510159276.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:16.485Z,1510159276.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:16.501Z,1510159276.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:16.890Z,1510159276.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:16.906Z,1510159276.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:17.278Z,1510159277.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:17.295Z,1510159277.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:17.677Z,1510159277.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:17.693Z,1510159277.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:18.076Z,1510159278.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:18.093Z,1510159278.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:18.479Z,1510159278.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:18.495Z,1510159278.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:18.885Z,1510159278.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:18.901Z,1510159278.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:19.286Z,1510159279.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:19.302Z,1510159279.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:19.690Z,1510159279.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:19.706Z,1510159279.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:20.078Z,1510159280.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:20.099Z,1510159280.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:20.476Z,1510159280.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:20.493Z,1510159280.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:20.879Z,1510159280.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:20.895Z,1510159280.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:21.278Z,1510159281.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:21.299Z,1510159281.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:21.679Z,1510159281.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:21.695Z,1510159281.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:22.090Z,1510159282.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:22.106Z,1510159282.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:22.490Z,1510159282.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:22.531Z,1510159282.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:22.890Z,1510159282.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:22.906Z,1510159282.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:23.283Z,1510159283.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:23.299Z,1510159283.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:23.684Z,1510159283.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:23.773Z,1510159283.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:24.081Z,1510159284.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:24.100Z,1510159284.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:24.483Z,1510159284.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:24.499Z,1510159284.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:24.891Z,1510159284.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:24.907Z,1510159284.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:25.295Z,1510159285.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:25.364Z,1510159285.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:25.706Z,1510159285.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:25.772Z,1510159285.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:26.081Z,1510159286.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:26.117Z,1510159286.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:26.475Z,1510159286.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:26.535Z,1510159286.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:26.872Z,1510159286.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:26.888Z,1510159286.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:27.276Z,1510159287.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:27.328Z,1510159287.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:27.676Z,1510159287.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:27.692Z,1510159287.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:28.090Z,1510159288.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:28.113Z,1510159288.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:28.493Z,1510159288.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:28.527Z,1510159288.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:28.886Z,1510159288.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:28.922Z,1510159288.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:29.278Z,1510159289.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:29.294Z,1510159289.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:29.684Z,1510159289.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:29.700Z,1510159289.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:30.077Z,1510159290.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:30.094Z,1510159290.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:30.474Z,1510159290.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:30.493Z,1510159290.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:30.892Z,1510159290.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:30.926Z,1510159290.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:31.299Z,1510159291.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:31.325Z,1510159291.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:31.690Z,1510159291.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:31.723Z,1510159291.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:32.076Z,1510159292.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:32.092Z,1510159292.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:32.474Z,1510159292.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:32.491Z,1510159292.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:32.879Z,1510159292.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:32.895Z,1510159292.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:33.280Z,1510159293.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:33.299Z,1510159293.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:33.679Z,1510159293.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:33.695Z,1510159293.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:34.089Z,1510159294.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:34.126Z,1510159294.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:34.497Z,1510159294.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:34.531Z,1510159294.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:34.886Z,1510159294.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:34.903Z,1510159294.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:35.277Z,1510159295.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:35.296Z,1510159295.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:35.680Z,1510159295.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:35.722Z,1510159295.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:36.078Z,1510159296.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:36.106Z,1510159296.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:36.477Z,1510159296.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:36.494Z,1510159296.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:36.889Z,1510159296.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:36.906Z,1510159296.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:37.286Z,1510159297.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:37.308Z,1510159297.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:37.689Z,1510159297.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:37.706Z,1510159297.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:38.079Z,1510159298.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:38.107Z,1510159298.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:38.476Z,1510159298.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:38.493Z,1510159298.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:38.877Z,1510159298.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:38.893Z,1510159298.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:39.286Z,1510159299.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:39.302Z,1510159299.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:39.675Z,1510159299.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:39.696Z,1510159299.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:40.086Z,1510159300.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:40.107Z,1510159300.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:40.489Z,1510159300.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:40.511Z,1510159300.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:40.890Z,1510159300.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:40.906Z,1510159300.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:41.277Z,1510159301.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:41.293Z,1510159301.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:41.682Z,1510159301.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:41.698Z,1510159301.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:42.075Z,1510159302.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:42.097Z,1510159302.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:42.483Z,1510159302.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:42.500Z,1510159302.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:42.890Z,1510159302.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:42.906Z,1510159302.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:43.290Z,1510159303.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:43.312Z,1510159303.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:43.686Z,1510159303.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:43.708Z,1510159303.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:44.086Z,1510159304.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:44.103Z,1510159304.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:44.481Z,1510159304.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:44.499Z,1510159304.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:44.881Z,1510159304.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:44.898Z,1510159304.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:45.277Z,1510159305.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:45.300Z,1510159305.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:45.682Z,1510159305.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:45.714Z,1510159305.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:46.102Z,1510159306.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:46.131Z,1510159306.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:46.496Z,1510159306.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:46.519Z,1510159306.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:46.890Z,1510159306.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:46.911Z,1510159306.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:47.275Z,1510159307.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:47.313Z,1510159307.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:47.675Z,1510159307.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:47.766Z,1510159307.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:48.072Z,1510159308.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:48.089Z,1510159308.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:48.471Z,1510159308.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:48.488Z,1510159308.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:48.889Z,1510159308.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:48.935Z,1510159308.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:49.289Z,1510159309.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:49.339Z,1510159309.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:49.689Z,1510159309.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:49.748Z,1510159309.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:50.084Z,1510159310.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:50.108Z,1510159310.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:50.483Z,1510159310.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:50.504Z,1510159310.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:50.880Z,1510159310.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:50.897Z,1510159310.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:51.282Z,1510159311.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:51.299Z,1510159311.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:51.693Z,1510159311.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:51.738Z,1510159311.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:52.095Z,1510159312.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:52.113Z,1510159312.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:52.499Z,1510159312.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:52.516Z,1510159312.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:52.896Z,1510159312.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:52.920Z,1510159312.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:53.275Z,1510159313.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:53.304Z,1510159313.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:53.689Z,1510159313.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:53.706Z,1510159313.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:54.072Z,1510159314.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:54.107Z,1510159314.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:54.471Z,1510159314.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:54.496Z,1510159314.496 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:54.496Z,1510159314.496 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66
2017-11-08T16:41:54.496Z,1510159314.496 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T16:41:54.498Z,1510159314.498 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:54.498Z,1510159314.498 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66
2017-11-08T16:41:54.498Z,1510159314.498 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T16:41:54.500Z,1510159314.500 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:54.500Z,1510159314.500 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 66
2017-11-08T16:41:54.500Z,1510159314.500 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T16:41:54.602Z,1510159314.602 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T16:41:54.602Z,1510159314.602 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T16:41:54.602Z,1510159314.602 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T16:41:54.893Z,1510159314.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:55.034Z,1510159315.034 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T16:41:55.034Z,1510159315.034 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66
2017-11-08T16:41:55.035Z,1510159315.035 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T16:41:55.035Z,1510159315.035 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66
2017-11-08T16:41:55.035Z,1510159315.035 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T16:41:55.035Z,1510159315.035 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 66
2017-11-08T16:41:55.300Z,1510159315.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:55.315Z,1510159315.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T16:41:55.315Z,1510159315.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:41:55.316Z,1510159315.316 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:41:55.316Z,1510159315.316 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T16:41:55.317Z,1510159315.317 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:41:55.317Z,1510159315.317 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:41:55.317Z,1510159315.317 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T16:41:55.318Z,1510159315.318 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:41:55.318Z,1510159315.318 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:41:58.812Z,1510159318.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:58.870Z,1510159318.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T16:41:58.871Z,1510159318.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:59.013Z,1510159319.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:59.029Z,1510159319.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-08T16:41:59.065Z,1510159319.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:59.412Z,1510159319.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:59.428Z,1510159319.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-08T16:41:59.429Z,1510159319.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:41:59.813Z,1510159319.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:41:59.837Z,1510159319.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-08T16:41:59.838Z,1510159319.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:00.211Z,1510159320.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:00.227Z,1510159320.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-08T16:42:00.228Z,1510159320.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:00.602Z,1510159320.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:00.635Z,1510159320.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-08T16:42:00.636Z,1510159320.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:01.028Z,1510159321.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:01.044Z,1510159321.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-08T16:42:01.047Z,1510159321.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:01.419Z,1510159321.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:01.436Z,1510159321.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T16:42:01.437Z,1510159321.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:01.810Z,1510159321.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:01.861Z,1510159321.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2017-11-08T16:42:01.862Z,1510159321.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:02.199Z,1510159322.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:02.219Z,1510159322.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T16:42:02.220Z,1510159322.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:02.598Z,1510159322.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:02.615Z,1510159322.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-08T16:42:02.616Z,1510159322.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:03.011Z,1510159323.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:03.027Z,1510159323.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-08T16:42:03.028Z,1510159323.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:03.403Z,1510159323.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:03.427Z,1510159323.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T16:42:03.445Z,1510159323.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:03.808Z,1510159323.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:03.856Z,1510159323.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2017-11-08T16:42:03.857Z,1510159323.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:04.213Z,1510159324.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:04.230Z,1510159324.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T16:42:04.231Z,1510159324.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:04.619Z,1510159324.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:04.658Z,1510159324.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2017-11-08T16:42:04.659Z,1510159324.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:05.014Z,1510159325.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:05.030Z,1510159325.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T16:42:05.030Z,1510159325.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:05.417Z,1510159325.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:05.433Z,1510159325.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T16:42:05.434Z,1510159325.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:05.806Z,1510159325.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:05.822Z,1510159325.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T16:42:05.823Z,1510159325.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:06.210Z,1510159326.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:06.226Z,1510159326.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T16:42:06.227Z,1510159326.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:06.603Z,1510159326.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:06.624Z,1510159326.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T16:42:06.625Z,1510159326.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:07.014Z,1510159327.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:07.030Z,1510159327.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T16:42:07.030Z,1510159327.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:07.426Z,1510159327.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:07.456Z,1510159327.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2017-11-08T16:42:07.457Z,1510159327.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:07.814Z,1510159327.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:07.851Z,1510159327.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2017-11-08T16:42:07.852Z,1510159327.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:08.207Z,1510159328.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:08.223Z,1510159328.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T16:42:08.224Z,1510159328.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:08.606Z,1510159328.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:08.622Z,1510159328.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T16:42:08.623Z,1510159328.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:09.006Z,1510159329.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:09.027Z,1510159329.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T16:42:09.028Z,1510159329.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:09.408Z,1510159329.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:09.425Z,1510159329.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T16:42:09.426Z,1510159329.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:09.815Z,1510159329.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:09.831Z,1510159329.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T16:42:09.832Z,1510159329.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:10.216Z,1510159330.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:10.232Z,1510159330.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T16:42:10.233Z,1510159330.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:10.622Z,1510159330.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:10.704Z,1510159330.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-11-08T16:42:10.706Z,1510159330.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:11.009Z,1510159331.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:11.106Z,1510159331.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-11-08T16:42:11.107Z,1510159331.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:11.405Z,1510159331.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:11.434Z,1510159331.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T16:42:11.435Z,1510159331.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:11.800Z,1510159331.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:11.848Z,1510159331.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-11-08T16:42:11.849Z,1510159331.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:12.196Z,1510159332.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:12.212Z,1510159332.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T16:42:12.213Z,1510159332.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:12.609Z,1510159332.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:12.664Z,1510159332.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-08T16:42:12.665Z,1510159332.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:13.014Z,1510159333.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:13.039Z,1510159333.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T16:42:13.041Z,1510159333.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:13.413Z,1510159333.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:13.439Z,1510159333.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T16:42:13.440Z,1510159333.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:13.809Z,1510159333.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:13.842Z,1510159333.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T16:42:13.843Z,1510159333.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:14.215Z,1510159334.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:14.244Z,1510159334.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-08T16:42:14.245Z,1510159334.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:14.599Z,1510159334.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:14.616Z,1510159334.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:14.999Z,1510159334.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:15.035Z,1510159335.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:15.405Z,1510159335.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:15.422Z,1510159335.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:15.804Z,1510159335.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:15.821Z,1510159335.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:16.207Z,1510159336.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:16.228Z,1510159336.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:16.618Z,1510159336.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:16.652Z,1510159336.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:17.014Z,1510159337.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:17.051Z,1510159337.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:17.404Z,1510159337.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:17.420Z,1510159337.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:17.810Z,1510159337.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:17.827Z,1510159337.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:18.205Z,1510159338.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:18.236Z,1510159338.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:18.607Z,1510159338.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:18.632Z,1510159338.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:19.012Z,1510159339.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:19.029Z,1510159339.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:19.414Z,1510159339.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:19.431Z,1510159339.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:19.808Z,1510159339.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:19.839Z,1510159339.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:20.199Z,1510159340.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:20.227Z,1510159340.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:20.599Z,1510159340.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:20.635Z,1510159340.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:20.999Z,1510159340.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:21.049Z,1510159341.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:21.400Z,1510159341.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:21.428Z,1510159341.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:21.796Z,1510159341.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:21.828Z,1510159341.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:22.220Z,1510159342.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:22.243Z,1510159342.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:22.621Z,1510159342.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:22.638Z,1510159342.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:23.016Z,1510159343.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:23.034Z,1510159343.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:23.396Z,1510159343.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:23.432Z,1510159343.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:23.795Z,1510159343.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:23.820Z,1510159343.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:24.200Z,1510159344.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:24.233Z,1510159344.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:24.599Z,1510159344.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:24.615Z,1510159344.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:25.010Z,1510159345.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:25.048Z,1510159345.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:25.414Z,1510159345.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:25.447Z,1510159345.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:25.805Z,1510159345.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:25.839Z,1510159345.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:26.195Z,1510159346.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:26.212Z,1510159346.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:26.599Z,1510159346.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:26.616Z,1510159346.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:26.999Z,1510159346.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:27.032Z,1510159347.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:27.403Z,1510159347.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:27.420Z,1510159347.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:27.803Z,1510159347.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:27.823Z,1510159347.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:28.213Z,1510159348.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:28.248Z,1510159348.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:28.609Z,1510159348.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:28.626Z,1510159348.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:29.014Z,1510159349.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:29.046Z,1510159349.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:29.403Z,1510159349.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:29.423Z,1510159349.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:29.803Z,1510159349.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:29.819Z,1510159349.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:30.203Z,1510159350.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:30.223Z,1510159350.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:30.600Z,1510159350.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:30.616Z,1510159350.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:31.013Z,1510159351.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:31.056Z,1510159351.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:31.418Z,1510159351.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:31.450Z,1510159351.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:31.810Z,1510159351.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:31.826Z,1510159351.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:32.205Z,1510159352.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:32.221Z,1510159352.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:32.605Z,1510159352.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:32.621Z,1510159352.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:33.004Z,1510159353.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:33.077Z,1510159353.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:33.406Z,1510159353.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:33.475Z,1510159353.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:33.805Z,1510159353.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:33.822Z,1510159353.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:34.217Z,1510159354.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:34.257Z,1510159354.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:34.611Z,1510159354.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:34.627Z,1510159354.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:35.010Z,1510159355.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:35.066Z,1510159355.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:35.405Z,1510159355.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:35.421Z,1510159355.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:35.802Z,1510159355.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:35.818Z,1510159355.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:36.205Z,1510159356.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:36.233Z,1510159356.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:36.603Z,1510159356.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:36.633Z,1510159356.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:37.011Z,1510159357.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:37.028Z,1510159357.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:37.414Z,1510159357.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:37.430Z,1510159357.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:37.810Z,1510159357.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:37.831Z,1510159357.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:38.206Z,1510159358.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:38.223Z,1510159358.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:38.603Z,1510159358.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:38.624Z,1510159358.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:39.003Z,1510159359.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:39.024Z,1510159359.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:39.407Z,1510159359.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:39.423Z,1510159359.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:39.803Z,1510159359.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:39.824Z,1510159359.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:40.210Z,1510159360.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:40.226Z,1510159360.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:40.611Z,1510159360.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:40.627Z,1510159360.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:41.013Z,1510159361.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:41.030Z,1510159361.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:41.406Z,1510159361.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:41.422Z,1510159361.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:41.802Z,1510159361.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:41.818Z,1510159361.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:42.206Z,1510159362.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:42.223Z,1510159362.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:42.603Z,1510159362.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:42.623Z,1510159362.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:43.011Z,1510159363.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:43.027Z,1510159363.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:43.413Z,1510159363.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:43.464Z,1510159363.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:43.811Z,1510159363.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:43.831Z,1510159363.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:44.207Z,1510159364.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:44.223Z,1510159364.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:44.606Z,1510159364.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:44.622Z,1510159364.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:45.003Z,1510159365.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:45.024Z,1510159365.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:45.407Z,1510159365.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:45.424Z,1510159365.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:45.804Z,1510159365.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:45.821Z,1510159365.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:46.211Z,1510159366.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:46.231Z,1510159366.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:46.613Z,1510159366.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:46.630Z,1510159366.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:47.020Z,1510159367.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:47.036Z,1510159367.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:47.399Z,1510159367.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:47.428Z,1510159367.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:47.795Z,1510159367.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:47.820Z,1510159367.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:48.200Z,1510159368.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:48.237Z,1510159368.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:48.599Z,1510159368.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:48.615Z,1510159368.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:49.013Z,1510159369.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:49.040Z,1510159369.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:49.413Z,1510159369.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:49.439Z,1510159369.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:49.810Z,1510159369.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:49.842Z,1510159369.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:50.199Z,1510159370.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:50.216Z,1510159370.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:50.599Z,1510159370.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:50.615Z,1510159370.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:51.002Z,1510159371.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:51.027Z,1510159371.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:51.404Z,1510159371.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:51.421Z,1510159371.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:51.803Z,1510159371.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:51.823Z,1510159371.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:52.215Z,1510159372.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:52.232Z,1510159372.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:52.617Z,1510159372.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:52.650Z,1510159372.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:52.729Z,1510159372.729 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T16:42:53.013Z,1510159373.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:53.030Z,1510159373.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:53.405Z,1510159373.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:53.421Z,1510159373.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:53.803Z,1510159373.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:53.820Z,1510159373.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:54.201Z,1510159374.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:54.226Z,1510159374.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:54.604Z,1510159374.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:54.625Z,1510159374.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:55.021Z,1510159375.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:55.054Z,1510159375.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:55.414Z,1510159375.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:55.431Z,1510159375.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:58.509Z,1510159378.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:58.601Z,1510159378.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:58.605Z,1510159378.605 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T16:37:58.2Z
2017-11-08T16:42:58.605Z,1510159378.605 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T16:42:58.605Z,1510159378.605 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T16:42:58.713Z,1510159378.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:58.745Z,1510159378.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:59.395Z,1510159379.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:59.444Z,1510159379.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:59.580Z,1510159379.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:42:59.631Z,1510159379.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:42:59.998Z,1510159379.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:00.062Z,1510159380.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:00.398Z,1510159380.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:00.436Z,1510159380.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:03.475Z,1510159383.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:03.492Z,1510159383.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:03.581Z,1510159383.581 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171108T132236/Courier0028.lzma
2017-11-08T16:43:03.603Z,1510159383.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:03.642Z,1510159383.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:04.015Z,1510159384.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:04.049Z,1510159384.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:04.381Z,1510159384.381 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0028.lzma.bak
2017-11-08T16:43:04.381Z,1510159384.381 [DataOverHttps](INFO): SBD MOMSN=5223007
2017-11-08T16:43:04.422Z,1510159384.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:04.441Z,1510159384.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:05.366Z,1510159385.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:05.383Z,1510159385.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:05.487Z,1510159385.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:05.535Z,1510159385.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:08.593Z,1510159388.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:08.637Z,1510159388.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:08.763Z,1510159388.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:08.803Z,1510159388.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:09.148Z,1510159389.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:09.177Z,1510159389.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:09.548Z,1510159389.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:09.579Z,1510159389.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:09.951Z,1510159389.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:09.977Z,1510159389.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:10.353Z,1510159390.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:10.378Z,1510159390.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:13.430Z,1510159393.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:13.446Z,1510159393.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:13.538Z,1510159393.538 [DataOverHttps](INFO): Sending 219 bytes from file Logs/20171108T132236/Express0029.lzma
2017-11-08T16:43:13.585Z,1510159393.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:13.621Z,1510159393.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:13.983Z,1510159393.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:13.000Z,1510159394.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:14.337Z,1510159394.337 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0029.lzma.bak
2017-11-08T16:43:14.337Z,1510159394.337 [DataOverHttps](INFO): SBD MOMSN=5223009
2017-11-08T16:43:14.388Z,1510159394.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:14.404Z,1510159394.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:15.308Z,1510159395.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:15.333Z,1510159395.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:15.336Z,1510159395.336 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T16:43:15.336Z,1510159395.336 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T16:43:15.336Z,1510159395.336 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T16:43:15.447Z,1510159395.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:15.487Z,1510159395.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:18.572Z,1510159398.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:18.589Z,1510159398.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:18.690Z,1510159398.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:18.738Z,1510159398.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:19.120Z,1510159399.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:19.137Z,1510159399.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:19.509Z,1510159399.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:19.535Z,1510159399.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:19.900Z,1510159399.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:19.936Z,1510159399.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:20.296Z,1510159400.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:20.339Z,1510159400.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:20.699Z,1510159400.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:20.715Z,1510159400.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:21.110Z,1510159401.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:21.168Z,1510159401.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:21.513Z,1510159401.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:21.547Z,1510159401.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:21.909Z,1510159401.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:21.941Z,1510159401.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:22.299Z,1510159402.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:22.319Z,1510159402.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:22.698Z,1510159402.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:22.715Z,1510159402.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:23.095Z,1510159403.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:23.111Z,1510159403.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:23.498Z,1510159403.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:23.515Z,1510159403.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:23.910Z,1510159403.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:23.918Z,1510159403.918 [BPC1](ERROR): Failed to receive battery data
2017-11-08T16:43:23.918Z,1510159403.918 [BPC1] Communications Fault, FailCount= 1
2017-11-08T16:43:23.918Z,1510159403.918 [BPC1](ERROR): Communications Fault
2017-11-08T16:43:23.955Z,1510159403.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:24.035Z,1510159404.035 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T16:43:24.306Z,1510159404.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:24.343Z,1510159404.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:24.710Z,1510159404.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:24.740Z,1510159404.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:25.098Z,1510159405.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:25.115Z,1510159405.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:25.209Z,1510159405.209 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T16:43:25.209Z,1510159405.209 [BPC1] No Fault, FailCount= 1
2017-11-08T16:43:25.499Z,1510159405.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:25.584Z,1510159405.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:25.899Z,1510159405.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:25.915Z,1510159405.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:26.299Z,1510159406.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:26.319Z,1510159406.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:26.694Z,1510159406.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:26.715Z,1510159406.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:27.106Z,1510159407.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:27.138Z,1510159407.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:27.506Z,1510159407.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:27.538Z,1510159407.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:27.909Z,1510159407.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:27.947Z,1510159407.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:28.298Z,1510159408.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:28.315Z,1510159408.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:28.698Z,1510159408.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:28.715Z,1510159408.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:29.095Z,1510159409.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:29.115Z,1510159409.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:29.498Z,1510159409.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:29.515Z,1510159409.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:29.910Z,1510159409.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:29.942Z,1510159409.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:30.305Z,1510159410.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:30.321Z,1510159410.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:30.710Z,1510159410.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:30.726Z,1510159410.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:31.098Z,1510159411.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:31.115Z,1510159411.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:31.497Z,1510159411.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:31.513Z,1510159411.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:31.898Z,1510159411.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:31.915Z,1510159411.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:32.296Z,1510159412.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:32.313Z,1510159412.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:32.697Z,1510159412.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:32.713Z,1510159412.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:33.110Z,1510159413.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:33.126Z,1510159413.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:33.513Z,1510159413.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:33.546Z,1510159413.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:33.905Z,1510159413.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:33.946Z,1510159413.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:34.301Z,1510159414.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:34.317Z,1510159414.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:34.700Z,1510159414.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:34.723Z,1510159414.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:35.098Z,1510159415.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:35.114Z,1510159415.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:35.500Z,1510159415.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:35.516Z,1510159415.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:35.910Z,1510159415.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:35.926Z,1510159415.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:36.309Z,1510159416.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:36.325Z,1510159416.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:36.710Z,1510159416.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:36.726Z,1510159416.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:37.100Z,1510159417.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:37.123Z,1510159417.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:37.498Z,1510159417.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:37.514Z,1510159417.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:37.900Z,1510159417.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:37.916Z,1510159417.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:38.300Z,1510159418.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:38.317Z,1510159418.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:38.698Z,1510159418.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:38.714Z,1510159418.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:39.110Z,1510159419.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:39.126Z,1510159419.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:39.510Z,1510159419.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:39.526Z,1510159419.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:39.905Z,1510159419.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:39.921Z,1510159419.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:40.301Z,1510159420.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:40.318Z,1510159420.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:40.701Z,1510159420.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:40.717Z,1510159420.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:41.100Z,1510159421.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:41.116Z,1510159421.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:41.501Z,1510159421.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:41.517Z,1510159421.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:41.906Z,1510159421.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:41.922Z,1510159421.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:42.306Z,1510159422.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:42.322Z,1510159422.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:42.710Z,1510159422.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:42.726Z,1510159422.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:43.103Z,1510159423.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:43.124Z,1510159423.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:43.500Z,1510159423.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:43.527Z,1510159423.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:43.898Z,1510159423.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:43.915Z,1510159423.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:44.302Z,1510159424.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:44.319Z,1510159424.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:44.698Z,1510159424.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:44.727Z,1510159424.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:45.107Z,1510159425.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:45.175Z,1510159425.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:45.510Z,1510159425.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:45.531Z,1510159425.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:45.910Z,1510159425.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:45.964Z,1510159425.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:46.302Z,1510159426.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:46.323Z,1510159426.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:46.705Z,1510159426.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:46.755Z,1510159426.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:47.104Z,1510159427.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:47.121Z,1510159427.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:47.503Z,1510159427.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:47.520Z,1510159427.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:47.908Z,1510159427.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:47.925Z,1510159427.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:48.307Z,1510159428.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:48.340Z,1510159428.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:48.707Z,1510159428.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:48.724Z,1510159428.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:49.105Z,1510159429.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:49.122Z,1510159429.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:49.499Z,1510159429.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:49.519Z,1510159429.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:49.895Z,1510159429.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:49.929Z,1510159429.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:50.302Z,1510159430.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:50.319Z,1510159430.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:50.703Z,1510159430.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:50.719Z,1510159430.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:51.108Z,1510159431.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:51.125Z,1510159431.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:51.511Z,1510159431.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:51.528Z,1510159431.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:51.911Z,1510159431.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:51.927Z,1510159431.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:52.301Z,1510159432.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:52.323Z,1510159432.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:52.694Z,1510159432.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:52.725Z,1510159432.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:53.103Z,1510159433.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:53.119Z,1510159433.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:53.499Z,1510159433.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:53.521Z,1510159433.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:53.910Z,1510159433.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:53.927Z,1510159433.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:54.311Z,1510159434.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:54.332Z,1510159434.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:54.708Z,1510159434.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:54.724Z,1510159434.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:55.099Z,1510159435.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:55.159Z,1510159435.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:55.498Z,1510159435.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:55.519Z,1510159435.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:55.895Z,1510159435.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:55.917Z,1510159435.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:56.299Z,1510159436.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:56.321Z,1510159436.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:56.702Z,1510159436.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:56.718Z,1510159436.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:57.111Z,1510159437.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:57.132Z,1510159437.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:57.510Z,1510159437.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:57.526Z,1510159437.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:57.911Z,1510159437.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:57.927Z,1510159437.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:58.301Z,1510159438.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:58.323Z,1510159438.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:58.726Z,1510159438.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:58.756Z,1510159438.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:59.099Z,1510159439.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:59.204Z,1510159439.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:59.498Z,1510159439.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:43:59.602Z,1510159439.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:43:59.930Z,1510159439.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:00.108Z,1510159440.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:00.311Z,1510159440.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:00.326Z,1510159440.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:00.710Z,1510159440.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:00.726Z,1510159440.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:01.099Z,1510159441.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:01.120Z,1510159441.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:01.498Z,1510159441.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:01.519Z,1510159441.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:01.895Z,1510159441.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:01.916Z,1510159441.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:02.302Z,1510159442.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:02.319Z,1510159442.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:02.698Z,1510159442.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:02.719Z,1510159442.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:03.110Z,1510159443.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:03.126Z,1510159443.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:03.510Z,1510159443.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:03.527Z,1510159443.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:03.911Z,1510159443.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:03.931Z,1510159443.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:04.298Z,1510159444.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:04.314Z,1510159444.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:04.699Z,1510159444.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:04.720Z,1510159444.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:05.098Z,1510159445.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:05.115Z,1510159445.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:05.494Z,1510159445.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:05.548Z,1510159445.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:05.911Z,1510159445.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:05.928Z,1510159445.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:06.312Z,1510159446.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:06.335Z,1510159446.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:06.712Z,1510159446.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:06.728Z,1510159446.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:07.099Z,1510159447.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:07.163Z,1510159447.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:07.495Z,1510159447.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:07.521Z,1510159447.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:07.891Z,1510159447.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:07.960Z,1510159447.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:08.296Z,1510159448.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:08.330Z,1510159448.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:08.691Z,1510159448.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:08.740Z,1510159448.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:09.112Z,1510159449.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:09.128Z,1510159449.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:09.515Z,1510159449.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:09.535Z,1510159449.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:09.906Z,1510159449.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:09.922Z,1510159449.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:10.295Z,1510159450.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:10.327Z,1510159450.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:10.695Z,1510159450.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:10.726Z,1510159450.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:11.092Z,1510159451.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:11.117Z,1510159451.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:11.491Z,1510159451.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:11.526Z,1510159451.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:11.911Z,1510159451.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:11.927Z,1510159451.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:12.312Z,1510159452.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:12.328Z,1510159452.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:12.712Z,1510159452.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:12.728Z,1510159452.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:13.091Z,1510159453.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:13.123Z,1510159453.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:13.495Z,1510159453.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:13.520Z,1510159453.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:13.891Z,1510159453.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:13.925Z,1510159453.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:14.296Z,1510159454.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:14.321Z,1510159454.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:14.691Z,1510159454.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:14.719Z,1510159454.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:15.112Z,1510159455.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:15.128Z,1510159455.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:15.518Z,1510159455.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:15.539Z,1510159455.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:15.915Z,1510159455.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:15.931Z,1510159455.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:18.976Z,1510159458.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:19.035Z,1510159459.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:19.161Z,1510159459.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:19.196Z,1510159459.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:19.568Z,1510159459.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:19.584Z,1510159459.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:19.967Z,1510159459.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:19.984Z,1510159459.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:20.363Z,1510159460.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:20.380Z,1510159460.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:20.747Z,1510159460.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:20.772Z,1510159460.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:21.148Z,1510159461.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:21.179Z,1510159461.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:21.547Z,1510159461.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:21.579Z,1510159461.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:21.964Z,1510159461.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:21.980Z,1510159461.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:22.367Z,1510159462.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:22.383Z,1510159462.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:22.763Z,1510159462.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:22.780Z,1510159462.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:23.147Z,1510159463.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:23.172Z,1510159463.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:23.543Z,1510159463.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:23.568Z,1510159463.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:23.947Z,1510159463.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:23.980Z,1510159463.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:24.344Z,1510159464.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:24.369Z,1510159464.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:24.743Z,1510159464.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:24.777Z,1510159464.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:25.164Z,1510159465.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:25.180Z,1510159465.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:25.564Z,1510159465.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:25.580Z,1510159465.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:25.965Z,1510159465.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:25.981Z,1510159465.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:26.347Z,1510159466.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:26.378Z,1510159466.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:26.743Z,1510159466.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:26.778Z,1510159466.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:27.159Z,1510159467.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:27.179Z,1510159467.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:27.548Z,1510159467.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:27.574Z,1510159467.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:27.969Z,1510159467.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:27.985Z,1510159467.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:28.369Z,1510159468.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:28.392Z,1510159468.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:28.765Z,1510159468.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:28.787Z,1510159468.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:29.148Z,1510159469.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:29.174Z,1510159469.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:29.547Z,1510159469.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:29.588Z,1510159469.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:29.944Z,1510159469.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:30.013Z,1510159470.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:30.349Z,1510159470.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:30.383Z,1510159470.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:30.744Z,1510159470.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:30.803Z,1510159470.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:31.165Z,1510159471.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:31.182Z,1510159471.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:31.569Z,1510159471.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:31.625Z,1510159471.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:31.966Z,1510159471.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:31.988Z,1510159471.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:32.347Z,1510159472.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:32.389Z,1510159472.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:32.748Z,1510159472.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:32.784Z,1510159472.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:33.148Z,1510159473.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:33.179Z,1510159473.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:33.547Z,1510159473.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:33.579Z,1510159473.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:33.970Z,1510159473.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:33.986Z,1510159473.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:34.364Z,1510159474.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:34.387Z,1510159474.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:34.753Z,1510159474.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:34.779Z,1510159474.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:35.147Z,1510159475.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:35.180Z,1510159475.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:35.543Z,1510159475.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:35.578Z,1510159475.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:35.947Z,1510159475.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:35.987Z,1510159475.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:36.348Z,1510159476.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:36.382Z,1510159476.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:36.743Z,1510159476.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:36.778Z,1510159476.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:37.153Z,1510159477.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:37.178Z,1510159477.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:37.567Z,1510159477.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:37.587Z,1510159477.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:37.954Z,1510159477.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:37.980Z,1510159477.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:38.343Z,1510159478.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:38.377Z,1510159478.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:38.748Z,1510159478.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:38.778Z,1510159478.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:39.148Z,1510159479.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:39.178Z,1510159479.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:39.543Z,1510159479.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:39.580Z,1510159479.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:39.965Z,1510159479.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:39.981Z,1510159479.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:40.367Z,1510159480.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:40.383Z,1510159480.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:40.764Z,1510159480.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:40.827Z,1510159480.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:41.147Z,1510159481.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:41.179Z,1510159481.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:41.547Z,1510159481.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:41.577Z,1510159481.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:41.943Z,1510159481.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:41.977Z,1510159481.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:42.348Z,1510159482.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:42.378Z,1510159482.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:42.747Z,1510159482.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:42.777Z,1510159482.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:43.164Z,1510159483.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:43.187Z,1510159483.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:43.568Z,1510159483.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:43.584Z,1510159483.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:43.953Z,1510159483.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:43.986Z,1510159483.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:44.343Z,1510159484.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:44.371Z,1510159484.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:44.748Z,1510159484.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:44.780Z,1510159484.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:45.148Z,1510159485.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:45.164Z,1510159485.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:45.547Z,1510159485.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:45.562Z,1510159485.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:45.965Z,1510159485.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:45.995Z,1510159485.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:46.358Z,1510159486.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:46.390Z,1510159486.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:46.757Z,1510159486.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:46.790Z,1510159486.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:47.148Z,1510159487.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:47.164Z,1510159487.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:47.551Z,1510159487.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:47.568Z,1510159487.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:47.950Z,1510159487.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:47.966Z,1510159487.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:48.351Z,1510159488.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:48.371Z,1510159488.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:48.750Z,1510159488.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:48.767Z,1510159488.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:49.161Z,1510159489.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:49.193Z,1510159489.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:49.562Z,1510159489.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:49.578Z,1510159489.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:49.958Z,1510159489.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:49.979Z,1510159489.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:50.350Z,1510159490.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:50.366Z,1510159490.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:50.750Z,1510159490.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:50.766Z,1510159490.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:51.151Z,1510159491.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:51.172Z,1510159491.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:51.550Z,1510159491.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:51.622Z,1510159491.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:51.962Z,1510159491.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:51.978Z,1510159491.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:52.362Z,1510159492.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:52.378Z,1510159492.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:52.757Z,1510159492.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:52.773Z,1510159492.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:53.153Z,1510159493.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:53.228Z,1510159493.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:53.546Z,1510159493.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:53.568Z,1510159493.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:53.948Z,1510159493.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:54.004Z,1510159494.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:54.355Z,1510159494.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:54.371Z,1510159494.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:54.746Z,1510159494.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:54.799Z,1510159494.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:55.162Z,1510159495.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:55.178Z,1510159495.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:55.563Z,1510159495.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:55.583Z,1510159495.583 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:55.584Z,1510159495.584 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67
2017-11-08T16:44:55.584Z,1510159495.584 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T16:44:55.586Z,1510159495.586 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:55.586Z,1510159495.586 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67
2017-11-08T16:44:55.586Z,1510159495.586 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T16:44:55.587Z,1510159495.587 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:55.588Z,1510159495.588 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 67
2017-11-08T16:44:55.588Z,1510159495.588 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T16:44:55.689Z,1510159495.689 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T16:44:55.689Z,1510159495.689 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T16:44:55.689Z,1510159495.689 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T16:44:55.962Z,1510159495.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:56.058Z,1510159496.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T16:44:56.058Z,1510159496.058 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67
2017-11-08T16:44:56.058Z,1510159496.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T16:44:56.059Z,1510159496.059 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67
2017-11-08T16:44:56.059Z,1510159496.059 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T16:44:56.059Z,1510159496.059 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 67
2017-11-08T16:44:56.349Z,1510159496.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:56.370Z,1510159496.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T16:44:56.371Z,1510159496.371 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:44:56.371Z,1510159496.371 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:44:56.371Z,1510159496.371 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T16:44:56.372Z,1510159496.372 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:44:56.372Z,1510159496.372 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:44:56.372Z,1510159496.372 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T16:44:56.373Z,1510159496.373 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:44:56.373Z,1510159496.373 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:44:56.747Z,1510159496.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:56.782Z,1510159496.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T16:44:56.783Z,1510159496.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:57.148Z,1510159497.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:57.179Z,1510159497.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T16:44:57.180Z,1510159497.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:57.543Z,1510159497.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:57.578Z,1510159497.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T16:44:57.579Z,1510159497.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:57.968Z,1510159497.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:57.991Z,1510159497.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T16:44:57.992Z,1510159497.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:58.368Z,1510159498.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:58.383Z,1510159498.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T16:44:58.385Z,1510159498.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:58.760Z,1510159498.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:58.775Z,1510159498.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T16:44:58.776Z,1510159498.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:59.147Z,1510159499.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:59.181Z,1510159499.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T16:44:59.182Z,1510159499.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:59.547Z,1510159499.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:59.571Z,1510159499.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T16:44:59.572Z,1510159499.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:44:59.947Z,1510159499.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:44:59.975Z,1510159499.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T16:44:59.976Z,1510159499.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:00.348Z,1510159500.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:00.373Z,1510159500.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T16:45:00.374Z,1510159500.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:00.747Z,1510159500.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:00.771Z,1510159500.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T16:45:00.772Z,1510159500.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:01.160Z,1510159501.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:01.175Z,1510159501.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T16:45:01.176Z,1510159501.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:01.568Z,1510159501.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:01.584Z,1510159501.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T16:45:01.585Z,1510159501.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:01.963Z,1510159501.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:01.979Z,1510159501.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T16:45:01.980Z,1510159501.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:02.343Z,1510159502.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:02.376Z,1510159502.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T16:45:02.377Z,1510159502.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:02.748Z,1510159502.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:02.773Z,1510159502.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T16:45:02.774Z,1510159502.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:03.148Z,1510159503.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:03.216Z,1510159503.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T16:45:03.217Z,1510159503.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:03.547Z,1510159503.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:03.571Z,1510159503.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T16:45:03.572Z,1510159503.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:03.969Z,1510159503.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:03.985Z,1510159503.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T16:45:03.986Z,1510159503.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:04.364Z,1510159504.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:04.379Z,1510159504.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T16:45:04.380Z,1510159504.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:04.764Z,1510159504.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:04.787Z,1510159504.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T16:45:04.788Z,1510159504.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:05.148Z,1510159505.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:05.174Z,1510159505.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T16:45:05.175Z,1510159505.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:05.548Z,1510159505.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:05.581Z,1510159505.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T16:45:05.582Z,1510159505.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:05.944Z,1510159505.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:05.979Z,1510159505.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T16:45:05.980Z,1510159505.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:06.345Z,1510159506.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:06.369Z,1510159506.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T16:45:06.370Z,1510159506.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:06.744Z,1510159506.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:06.760Z,1510159506.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T16:45:06.761Z,1510159506.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:07.158Z,1510159507.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:07.194Z,1510159507.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T16:45:07.195Z,1510159507.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:07.558Z,1510159507.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:07.594Z,1510159507.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T16:45:07.595Z,1510159507.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:07.962Z,1510159507.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:08.011Z,1510159508.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T16:45:08.012Z,1510159508.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:08.347Z,1510159508.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:08.363Z,1510159508.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T16:45:08.364Z,1510159508.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:08.751Z,1510159508.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:08.767Z,1510159508.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T16:45:08.768Z,1510159508.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:09.153Z,1510159509.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:09.169Z,1510159509.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T16:45:09.170Z,1510159509.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:09.551Z,1510159509.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:09.566Z,1510159509.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T16:45:09.567Z,1510159509.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:09.958Z,1510159509.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:09.974Z,1510159509.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T16:45:09.975Z,1510159509.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:10.358Z,1510159510.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:10.374Z,1510159510.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T16:45:10.375Z,1510159510.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:10.761Z,1510159510.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:10.804Z,1510159510.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T16:45:10.805Z,1510159510.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:11.151Z,1510159511.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:11.166Z,1510159511.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T16:45:11.167Z,1510159511.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:11.546Z,1510159511.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:11.580Z,1510159511.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T16:45:11.581Z,1510159511.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:11.952Z,1510159511.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:11.969Z,1510159511.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T16:45:11.969Z,1510159511.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:12.350Z,1510159512.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:12.371Z,1510159512.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T16:45:12.372Z,1510159512.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:12.749Z,1510159512.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:12.765Z,1510159512.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T16:45:12.766Z,1510159512.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:13.157Z,1510159513.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:13.173Z,1510159513.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T16:45:13.174Z,1510159513.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:13.557Z,1510159513.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:13.574Z,1510159513.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T16:45:13.575Z,1510159513.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:13.958Z,1510159513.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:14.022Z,1510159514.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T16:45:14.023Z,1510159514.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:14.353Z,1510159514.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:14.368Z,1510159514.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T16:45:14.369Z,1510159514.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:14.750Z,1510159514.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:14.812Z,1510159514.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T16:45:14.813Z,1510159514.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:15.154Z,1510159515.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:15.175Z,1510159515.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T16:45:15.176Z,1510159515.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:15.553Z,1510159515.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:15.613Z,1510159515.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:15.965Z,1510159515.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:15.981Z,1510159515.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:19.058Z,1510159519.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:19.075Z,1510159519.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:19.208Z,1510159519.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:19.255Z,1510159519.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:19.591Z,1510159519.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:19.619Z,1510159519.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:19.987Z,1510159519.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:20.012Z,1510159520.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:20.391Z,1510159520.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:20.416Z,1510159520.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:20.783Z,1510159520.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:20.814Z,1510159520.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:21.204Z,1510159521.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:21.223Z,1510159521.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:21.607Z,1510159521.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:21.622Z,1510159521.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:22.004Z,1510159522.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:22.020Z,1510159522.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:22.383Z,1510159522.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:22.414Z,1510159522.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:22.787Z,1510159522.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:22.811Z,1510159522.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:23.184Z,1510159523.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:23.218Z,1510159523.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:23.583Z,1510159523.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:23.631Z,1510159523.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:24.003Z,1510159524.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:24.019Z,1510159524.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:24.400Z,1510159524.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:24.431Z,1510159524.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:24.803Z,1510159524.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:24.827Z,1510159524.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:25.187Z,1510159525.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:25.216Z,1510159525.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:25.587Z,1510159525.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:25.613Z,1510159525.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:25.987Z,1510159525.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:26.012Z,1510159526.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:26.387Z,1510159526.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:26.411Z,1510159526.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:26.783Z,1510159526.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:26.815Z,1510159526.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:27.204Z,1510159527.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:27.230Z,1510159527.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:27.603Z,1510159527.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:27.622Z,1510159527.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:28.004Z,1510159528.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:28.020Z,1510159528.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:28.387Z,1510159528.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:28.416Z,1510159528.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:28.787Z,1510159528.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:28.819Z,1510159528.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:29.184Z,1510159529.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:29.220Z,1510159529.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:29.587Z,1510159529.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:29.612Z,1510159529.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:30.002Z,1510159530.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:30.018Z,1510159530.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:30.405Z,1510159530.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:30.429Z,1510159530.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:30.808Z,1510159530.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:30.828Z,1510159530.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:31.187Z,1510159531.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:31.218Z,1510159531.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:31.583Z,1510159531.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:31.618Z,1510159531.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:31.987Z,1510159531.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:32.013Z,1510159532.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:32.388Z,1510159532.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:32.413Z,1510159532.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:32.787Z,1510159532.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:32.813Z,1510159532.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:33.208Z,1510159533.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:33.224Z,1510159533.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:33.608Z,1510159533.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:33.624Z,1510159533.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:34.003Z,1510159534.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:34.027Z,1510159534.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:34.387Z,1510159534.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:34.472Z,1510159534.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:34.787Z,1510159534.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:34.817Z,1510159534.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:35.188Z,1510159535.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:35.237Z,1510159535.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:35.587Z,1510159535.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:35.620Z,1510159535.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:36.007Z,1510159536.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:36.071Z,1510159536.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:36.405Z,1510159536.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:36.420Z,1510159536.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:36.808Z,1510159536.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:36.824Z,1510159536.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:37.187Z,1510159537.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:37.220Z,1510159537.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:37.583Z,1510159537.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:37.619Z,1510159537.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:37.987Z,1510159537.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:38.022Z,1510159538.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:38.388Z,1510159538.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:38.422Z,1510159538.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:38.787Z,1510159538.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:38.824Z,1510159538.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:39.202Z,1510159539.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:39.231Z,1510159539.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:39.601Z,1510159539.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:39.631Z,1510159539.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:39.997Z,1510159539.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:40.025Z,1510159540.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:40.387Z,1510159540.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:40.428Z,1510159540.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:40.787Z,1510159540.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:40.807Z,1510159540.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:41.192Z,1510159541.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:41.208Z,1510159541.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:41.590Z,1510159541.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:41.606Z,1510159541.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:42.001Z,1510159542.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:42.035Z,1510159542.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:42.405Z,1510159542.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:42.431Z,1510159542.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:42.801Z,1510159542.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:42.832Z,1510159542.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:43.190Z,1510159543.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:43.207Z,1510159543.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:43.587Z,1510159543.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:43.607Z,1510159543.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:43.990Z,1510159543.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:44.006Z,1510159544.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:44.387Z,1510159544.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:44.443Z,1510159544.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:44.787Z,1510159544.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:44.807Z,1510159544.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:45.209Z,1510159545.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:45.295Z,1510159545.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:45.601Z,1510159545.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:45.635Z,1510159545.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:46.001Z,1510159546.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:46.034Z,1510159546.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:46.388Z,1510159546.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:46.404Z,1510159546.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:46.791Z,1510159546.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:46.807Z,1510159546.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:47.191Z,1510159547.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:47.207Z,1510159547.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:47.591Z,1510159547.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:47.608Z,1510159547.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:48.002Z,1510159548.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:48.041Z,1510159548.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:48.398Z,1510159548.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:48.414Z,1510159548.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:48.802Z,1510159548.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:48.819Z,1510159548.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:49.193Z,1510159549.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:49.210Z,1510159549.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:49.589Z,1510159549.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:49.608Z,1510159549.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:49.993Z,1510159549.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:50.064Z,1510159550.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:50.394Z,1510159550.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:50.411Z,1510159550.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:50.797Z,1510159550.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:50.814Z,1510159550.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:51.206Z,1510159551.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:51.226Z,1510159551.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:51.603Z,1510159551.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:51.624Z,1510159551.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:52.005Z,1510159552.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:52.021Z,1510159552.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:52.390Z,1510159552.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:52.410Z,1510159552.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:52.792Z,1510159552.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:52.814Z,1510159552.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:53.196Z,1510159553.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:53.223Z,1510159553.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:53.590Z,1510159553.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:53.611Z,1510159553.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:53.693Z,1510159553.693 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:45:53.693Z,1510159553.693 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T16:45:53.817Z,1510159553.817 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:45:53.817Z,1510159553.817 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:45:53.817Z,1510159553.817 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:45:53.817Z,1510159553.817 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T16:45:53.817Z,1510159553.817 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:45:54.001Z,1510159554.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:54.018Z,1510159554.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:54.093Z,1510159554.093 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:45:54.221Z,1510159554.221 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:45:54.306Z,1510159554.306 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:45:54.405Z,1510159554.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:54.423Z,1510159554.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:54.803Z,1510159554.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:54.830Z,1510159554.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:55.193Z,1510159555.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:55.255Z,1510159555.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:55.594Z,1510159555.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:55.611Z,1510159555.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:55.701Z,1510159555.701 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:45:55.701Z,1510159555.701 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T16:45:55.921Z,1510159555.921 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:45:55.921Z,1510159555.921 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:45:55.921Z,1510159555.921 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:45:55.921Z,1510159555.921 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T16:45:55.921Z,1510159555.921 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:45:55.984Z,1510159555.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:56.022Z,1510159556.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:56.121Z,1510159556.121 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:45:56.325Z,1510159556.325 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:45:56.401Z,1510159556.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:56.473Z,1510159556.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:56.527Z,1510159556.527 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:45:56.787Z,1510159556.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:56.814Z,1510159556.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:57.198Z,1510159557.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:57.252Z,1510159557.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:57.608Z,1510159557.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:57.626Z,1510159557.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:58.009Z,1510159558.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:58.030Z,1510159558.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:58.112Z,1510159558.112 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:45:58.113Z,1510159558.113 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T16:45:58.141Z,1510159558.141 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:45:58.141Z,1510159558.141 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:45:58.141Z,1510159558.141 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:45:58.141Z,1510159558.141 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T16:45:58.141Z,1510159558.141 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:45:58.384Z,1510159558.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:58.400Z,1510159558.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:58.489Z,1510159558.489 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:45:58.545Z,1510159558.545 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:45:58.633Z,1510159558.633 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:45:58.796Z,1510159558.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:58.828Z,1510159558.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:59.184Z,1510159559.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:59.200Z,1510159559.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:45:59.583Z,1510159559.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:45:59.604Z,1510159559.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:00.002Z,1510159560.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:00.034Z,1510159560.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:00.118Z,1510159560.118 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:46:00.119Z,1510159560.119 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T16:46:00.249Z,1510159560.249 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:46:00.249Z,1510159560.249 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:46:00.249Z,1510159560.249 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:46:00.249Z,1510159560.249 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T16:46:00.250Z,1510159560.250 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:46:00.401Z,1510159560.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:00.434Z,1510159560.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:00.518Z,1510159560.518 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:46:00.653Z,1510159560.653 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:46:00.735Z,1510159560.735 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:46:00.806Z,1510159560.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:00.838Z,1510159560.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:01.191Z,1510159561.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:01.212Z,1510159561.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:01.590Z,1510159561.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:01.606Z,1510159561.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:01.986Z,1510159561.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:02.003Z,1510159562.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:02.085Z,1510159562.085 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:46:02.085Z,1510159562.085 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T16:46:02.349Z,1510159562.349 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:46:02.349Z,1510159562.349 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:46:02.349Z,1510159562.349 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:46:02.350Z,1510159562.350 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T16:46:02.350Z,1510159562.350 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:46:02.408Z,1510159562.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:02.440Z,1510159562.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:02.521Z,1510159562.521 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:46:02.521Z,1510159562.521 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:46:02.753Z,1510159562.753 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:46:02.832Z,1510159562.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:02.906Z,1510159562.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:02.953Z,1510159562.953 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:46:03.199Z,1510159563.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:03.238Z,1510159563.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:03.602Z,1510159563.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:03.618Z,1510159563.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:03.999Z,1510159563.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:04.020Z,1510159564.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:04.390Z,1510159564.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:04.406Z,1510159564.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:04.793Z,1510159564.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:04.810Z,1510159564.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:05.195Z,1510159565.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:05.211Z,1510159565.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:05.590Z,1510159565.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:05.647Z,1510159565.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:06.002Z,1510159566.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:06.021Z,1510159566.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:06.400Z,1510159566.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:06.423Z,1510159566.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:06.802Z,1510159566.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:06.818Z,1510159566.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:07.193Z,1510159567.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:07.210Z,1510159567.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:07.594Z,1510159567.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:07.610Z,1510159567.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:07.989Z,1510159567.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:08.012Z,1510159568.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:08.394Z,1510159568.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:08.410Z,1510159568.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:08.790Z,1510159568.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:08.806Z,1510159568.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:09.198Z,1510159569.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:09.223Z,1510159569.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:09.601Z,1510159569.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:09.618Z,1510159569.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:10.001Z,1510159570.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:10.017Z,1510159570.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:10.393Z,1510159570.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:10.416Z,1510159570.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:10.792Z,1510159570.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:10.809Z,1510159570.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:11.194Z,1510159571.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:11.211Z,1510159571.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:11.587Z,1510159571.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:11.608Z,1510159571.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:11.998Z,1510159571.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:12.020Z,1510159572.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:12.401Z,1510159572.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:12.420Z,1510159572.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:12.798Z,1510159572.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:12.820Z,1510159572.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:13.193Z,1510159573.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:13.210Z,1510159573.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:13.594Z,1510159573.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:13.610Z,1510159573.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:13.993Z,1510159573.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:14.010Z,1510159574.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:14.394Z,1510159574.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:14.410Z,1510159574.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:14.794Z,1510159574.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:14.810Z,1510159574.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:15.198Z,1510159575.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:15.220Z,1510159575.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:15.606Z,1510159575.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:15.643Z,1510159575.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:16.005Z,1510159576.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:16.028Z,1510159576.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:19.137Z,1510159579.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:19.212Z,1510159579.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:19.331Z,1510159579.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:19.362Z,1510159579.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:19.755Z,1510159579.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:19.777Z,1510159579.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:20.151Z,1510159580.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:20.204Z,1510159580.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:20.551Z,1510159580.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:20.567Z,1510159580.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:20.927Z,1510159580.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:20.996Z,1510159580.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:21.327Z,1510159581.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:21.352Z,1510159581.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:21.731Z,1510159581.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:21.767Z,1510159581.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:22.132Z,1510159582.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:22.163Z,1510159582.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:22.526Z,1510159582.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:22.558Z,1510159582.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:22.951Z,1510159582.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:22.967Z,1510159582.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:23.348Z,1510159583.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:23.364Z,1510159583.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:23.742Z,1510159583.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:23.762Z,1510159583.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:24.131Z,1510159584.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:24.163Z,1510159584.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:24.531Z,1510159584.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:24.556Z,1510159584.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:24.927Z,1510159584.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:24.958Z,1510159584.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:25.332Z,1510159585.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:25.366Z,1510159585.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:25.727Z,1510159585.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:25.752Z,1510159585.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:26.143Z,1510159586.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:26.160Z,1510159586.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:26.546Z,1510159586.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:26.572Z,1510159586.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:26.952Z,1510159586.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:26.967Z,1510159586.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:27.331Z,1510159587.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:27.356Z,1510159587.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:27.731Z,1510159587.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:27.756Z,1510159587.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:28.132Z,1510159588.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:28.163Z,1510159588.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:28.526Z,1510159588.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:28.557Z,1510159588.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:28.947Z,1510159588.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:28.963Z,1510159588.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:29.348Z,1510159589.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:29.401Z,1510159589.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:29.744Z,1510159589.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:29.760Z,1510159589.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:30.131Z,1510159590.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:30.156Z,1510159590.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:30.531Z,1510159590.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:30.556Z,1510159590.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:30.931Z,1510159590.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:30.956Z,1510159590.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:31.332Z,1510159591.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:31.357Z,1510159591.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:31.731Z,1510159591.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:31.756Z,1510159591.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:32.144Z,1510159592.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:32.160Z,1510159592.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:32.552Z,1510159592.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:32.568Z,1510159592.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:32.948Z,1510159592.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:32.963Z,1510159592.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:33.331Z,1510159593.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:33.357Z,1510159593.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:33.731Z,1510159593.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:33.757Z,1510159593.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:34.132Z,1510159594.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:34.163Z,1510159594.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:34.527Z,1510159594.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:34.562Z,1510159594.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:34.947Z,1510159594.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:34.964Z,1510159594.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:35.347Z,1510159595.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:35.373Z,1510159595.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:35.738Z,1510159595.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:35.771Z,1510159595.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:36.131Z,1510159596.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:36.172Z,1510159596.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:36.527Z,1510159596.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:36.543Z,1510159596.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:36.928Z,1510159596.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:36.944Z,1510159596.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:37.332Z,1510159597.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:37.372Z,1510159597.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:37.735Z,1510159597.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:37.751Z,1510159597.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:38.146Z,1510159598.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:38.179Z,1510159598.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:38.546Z,1510159598.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:38.578Z,1510159598.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:38.945Z,1510159598.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:38.981Z,1510159598.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:39.337Z,1510159599.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:39.353Z,1510159599.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:39.735Z,1510159599.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:39.752Z,1510159599.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:40.134Z,1510159600.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:40.201Z,1510159600.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:40.536Z,1510159600.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:40.552Z,1510159600.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:40.938Z,1510159600.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:40.955Z,1510159600.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:41.350Z,1510159601.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:41.381Z,1510159601.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:41.739Z,1510159601.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:41.795Z,1510159601.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:42.137Z,1510159602.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:42.154Z,1510159602.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:42.536Z,1510159602.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:42.577Z,1510159602.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:42.939Z,1510159602.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:42.957Z,1510159602.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:43.339Z,1510159603.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:43.393Z,1510159603.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:43.738Z,1510159603.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:43.754Z,1510159603.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:44.139Z,1510159604.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:44.169Z,1510159604.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:44.545Z,1510159604.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:44.561Z,1510159604.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:44.946Z,1510159604.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:44.967Z,1510159604.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:45.339Z,1510159605.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:45.360Z,1510159605.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:45.741Z,1510159605.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:45.756Z,1510159605.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:46.137Z,1510159606.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:46.164Z,1510159606.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:46.531Z,1510159606.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:46.561Z,1510159606.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:46.943Z,1510159606.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:46.959Z,1510159606.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:47.346Z,1510159607.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:47.367Z,1510159607.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:47.743Z,1510159607.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:47.764Z,1510159607.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:48.138Z,1510159608.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:48.153Z,1510159608.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:48.535Z,1510159608.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:48.566Z,1510159608.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:48.930Z,1510159608.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:48.964Z,1510159608.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:49.338Z,1510159609.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:49.354Z,1510159609.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:49.735Z,1510159609.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:49.766Z,1510159609.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:50.142Z,1510159610.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:50.159Z,1510159610.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:50.545Z,1510159610.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:50.562Z,1510159610.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:50.946Z,1510159610.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:50.962Z,1510159610.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:51.333Z,1510159611.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:51.349Z,1510159611.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:51.737Z,1510159611.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:51.787Z,1510159611.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:52.139Z,1510159612.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:52.156Z,1510159612.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:52.537Z,1510159612.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:52.553Z,1510159612.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:52.942Z,1510159612.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:52.958Z,1510159612.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:53.346Z,1510159613.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:53.362Z,1510159613.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:53.743Z,1510159613.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:53.763Z,1510159613.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:54.137Z,1510159614.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:54.153Z,1510159614.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:54.531Z,1510159614.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:54.562Z,1510159614.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:54.931Z,1510159614.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:54.952Z,1510159614.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:55.337Z,1510159615.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:55.353Z,1510159615.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:55.735Z,1510159615.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:55.765Z,1510159615.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:56.142Z,1510159616.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:56.159Z,1510159616.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:56.545Z,1510159616.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:56.561Z,1510159616.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:56.946Z,1510159616.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:56.962Z,1510159616.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:57.337Z,1510159617.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:57.354Z,1510159617.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:57.737Z,1510159617.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:57.752Z,1510159617.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:58.137Z,1510159618.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:58.158Z,1510159618.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:58.531Z,1510159618.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:58.552Z,1510159618.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:58.942Z,1510159618.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:58.958Z,1510159618.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:59.346Z,1510159619.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:59.362Z,1510159619.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:46:59.742Z,1510159619.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:46:59.764Z,1510159619.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:00.135Z,1510159620.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:00.155Z,1510159620.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:00.535Z,1510159620.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:00.565Z,1510159620.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:00.934Z,1510159620.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:00.950Z,1510159620.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:01.334Z,1510159621.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:01.350Z,1510159621.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:01.735Z,1510159621.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:01.765Z,1510159621.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:02.142Z,1510159622.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:02.163Z,1510159622.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:02.545Z,1510159622.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:02.604Z,1510159622.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:02.946Z,1510159622.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:02.962Z,1510159622.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:03.337Z,1510159623.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:03.403Z,1510159623.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:03.737Z,1510159623.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:03.753Z,1510159623.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:04.128Z,1510159624.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:04.186Z,1510159624.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:04.537Z,1510159624.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:04.553Z,1510159624.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:04.946Z,1510159624.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:04.990Z,1510159624.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:05.347Z,1510159625.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:05.368Z,1510159625.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:05.743Z,1510159625.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:05.767Z,1510159625.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:06.137Z,1510159626.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:06.153Z,1510159626.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:06.535Z,1510159626.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:06.555Z,1510159626.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:06.927Z,1510159626.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:06.960Z,1510159626.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:07.338Z,1510159627.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:07.353Z,1510159627.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:07.735Z,1510159627.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:07.758Z,1510159627.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:08.147Z,1510159628.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:08.163Z,1510159628.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:08.550Z,1510159628.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:08.565Z,1510159628.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:08.951Z,1510159628.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:08.972Z,1510159628.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:09.337Z,1510159629.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:09.353Z,1510159629.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:09.737Z,1510159629.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:09.759Z,1510159629.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:10.137Z,1510159630.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:10.165Z,1510159630.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:10.531Z,1510159630.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:10.563Z,1510159630.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:10.943Z,1510159630.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:10.963Z,1510159630.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:11.352Z,1510159631.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:11.368Z,1510159631.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:11.748Z,1510159631.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:11.764Z,1510159631.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:12.131Z,1510159632.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:12.163Z,1510159632.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:12.528Z,1510159632.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:12.562Z,1510159632.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:12.931Z,1510159632.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:12.963Z,1510159632.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:13.332Z,1510159633.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:13.397Z,1510159633.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:13.732Z,1510159633.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:13.758Z,1510159633.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:14.148Z,1510159634.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:14.164Z,1510159634.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:14.551Z,1510159634.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:14.567Z,1510159634.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:14.952Z,1510159634.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:14.968Z,1510159634.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:15.327Z,1510159635.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:15.352Z,1510159635.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:15.741Z,1510159635.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:15.757Z,1510159635.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:16.144Z,1510159636.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:16.160Z,1510159636.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:19.301Z,1510159639.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:19.318Z,1510159639.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:19.448Z,1510159639.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:19.496Z,1510159639.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:19.862Z,1510159639.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:19.905Z,1510159639.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:20.244Z,1510159640.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:20.260Z,1510159640.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:20.627Z,1510159640.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:20.651Z,1510159640.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:21.025Z,1510159641.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:21.061Z,1510159641.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:21.423Z,1510159641.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:21.459Z,1510159641.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:21.833Z,1510159641.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:21.863Z,1510159641.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:22.242Z,1510159642.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:22.264Z,1510159642.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:22.634Z,1510159642.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:22.668Z,1510159642.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:23.019Z,1510159643.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:23.035Z,1510159643.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:23.424Z,1510159643.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:23.456Z,1510159643.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:23.823Z,1510159643.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:23.872Z,1510159643.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:24.223Z,1510159644.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:24.239Z,1510159644.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:24.624Z,1510159644.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:24.640Z,1510159644.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:25.034Z,1510159645.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:25.066Z,1510159645.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:25.437Z,1510159645.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:25.481Z,1510159645.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:25.838Z,1510159645.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:25.870Z,1510159645.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:26.227Z,1510159646.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:26.275Z,1510159646.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:26.623Z,1510159646.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:26.652Z,1510159646.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:27.025Z,1510159647.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:27.079Z,1510159647.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:27.431Z,1510159647.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:27.447Z,1510159647.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:27.837Z,1510159647.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:27.853Z,1510159647.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:28.235Z,1510159648.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:28.255Z,1510159648.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:28.635Z,1510159648.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:28.674Z,1510159648.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:29.031Z,1510159649.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:29.047Z,1510159649.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:29.427Z,1510159649.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:29.451Z,1510159649.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:29.826Z,1510159649.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:29.843Z,1510159649.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:30.230Z,1510159650.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:30.247Z,1510159650.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:30.627Z,1510159650.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:30.644Z,1510159650.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:31.035Z,1510159651.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:31.059Z,1510159651.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:31.437Z,1510159651.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:31.454Z,1510159651.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:31.836Z,1510159651.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:31.852Z,1510159651.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:32.227Z,1510159652.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:32.243Z,1510159652.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:32.630Z,1510159652.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:32.645Z,1510159652.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:33.027Z,1510159653.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:33.047Z,1510159653.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:33.423Z,1510159653.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:33.455Z,1510159653.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:33.838Z,1510159653.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:33.854Z,1510159653.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:34.236Z,1510159654.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:34.252Z,1510159654.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:34.635Z,1510159654.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:34.652Z,1510159654.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:35.030Z,1510159655.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:35.046Z,1510159655.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:35.427Z,1510159655.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:35.481Z,1510159655.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:35.830Z,1510159655.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:35.851Z,1510159655.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:36.231Z,1510159656.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:36.247Z,1510159656.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:36.626Z,1510159656.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:36.647Z,1510159656.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:37.035Z,1510159657.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:37.052Z,1510159657.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:37.438Z,1510159657.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:37.454Z,1510159657.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:37.835Z,1510159657.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:37.859Z,1510159657.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:38.230Z,1510159658.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:38.252Z,1510159658.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:38.629Z,1510159658.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:38.646Z,1510159658.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:39.027Z,1510159659.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:39.043Z,1510159659.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:39.423Z,1510159659.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:39.456Z,1510159659.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:39.838Z,1510159659.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:39.854Z,1510159659.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:40.239Z,1510159660.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:40.259Z,1510159660.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:40.639Z,1510159660.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:40.660Z,1510159660.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:41.027Z,1510159661.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:41.058Z,1510159661.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:41.426Z,1510159661.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:41.460Z,1510159661.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:41.819Z,1510159661.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:41.851Z,1510159661.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:42.219Z,1510159662.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:42.245Z,1510159662.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:42.619Z,1510159662.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:42.659Z,1510159662.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:43.039Z,1510159663.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:43.056Z,1510159663.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:43.442Z,1510159663.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:43.458Z,1510159663.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:43.840Z,1510159663.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:43.856Z,1510159663.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:44.229Z,1510159664.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:44.251Z,1510159664.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:44.619Z,1510159664.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:44.652Z,1510159664.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:45.020Z,1510159665.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:45.054Z,1510159665.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:45.429Z,1510159665.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:45.445Z,1510159665.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:45.839Z,1510159665.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:45.859Z,1510159665.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:46.240Z,1510159666.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:46.263Z,1510159666.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:46.640Z,1510159666.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:46.656Z,1510159666.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:47.029Z,1510159667.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:47.051Z,1510159667.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:47.419Z,1510159667.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:47.469Z,1510159667.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:47.823Z,1510159667.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:47.855Z,1510159667.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:48.223Z,1510159668.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:48.272Z,1510159668.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:48.619Z,1510159668.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:48.652Z,1510159668.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:49.044Z,1510159669.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:49.099Z,1510159669.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:49.443Z,1510159669.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:49.459Z,1510159669.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:49.840Z,1510159669.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:49.863Z,1510159669.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:50.223Z,1510159670.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:50.248Z,1510159670.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:50.623Z,1510159670.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:50.647Z,1510159670.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:51.024Z,1510159671.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:51.049Z,1510159671.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:51.423Z,1510159671.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:51.448Z,1510159671.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:51.839Z,1510159671.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:51.855Z,1510159671.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:52.240Z,1510159672.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:52.263Z,1510159672.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:52.644Z,1510159672.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:52.660Z,1510159672.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:53.023Z,1510159673.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:53.056Z,1510159673.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:53.419Z,1510159673.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:53.450Z,1510159673.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:53.823Z,1510159673.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:53.848Z,1510159673.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:54.224Z,1510159674.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:54.255Z,1510159674.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:54.619Z,1510159674.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:54.655Z,1510159674.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:55.044Z,1510159675.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:55.060Z,1510159675.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:55.444Z,1510159675.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:55.460Z,1510159675.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:55.840Z,1510159675.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:55.863Z,1510159675.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:56.223Z,1510159676.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:56.248Z,1510159676.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:56.623Z,1510159676.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:56.648Z,1510159676.648 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:56.648Z,1510159676.648 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68
2017-11-08T16:47:56.648Z,1510159676.648 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T16:47:56.650Z,1510159676.650 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:56.650Z,1510159676.650 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68
2017-11-08T16:47:56.650Z,1510159676.650 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T16:47:56.652Z,1510159676.652 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:56.652Z,1510159676.652 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 68
2017-11-08T16:47:56.652Z,1510159676.652 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T16:47:56.729Z,1510159676.729 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T16:47:56.729Z,1510159676.729 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T16:47:56.729Z,1510159676.729 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T16:47:57.024Z,1510159677.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:57.129Z,1510159677.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T16:47:57.129Z,1510159677.129 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68
2017-11-08T16:47:57.129Z,1510159677.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T16:47:57.129Z,1510159677.129 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68
2017-11-08T16:47:57.130Z,1510159677.130 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T16:47:57.130Z,1510159677.130 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 68
2017-11-08T16:47:57.423Z,1510159677.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:57.474Z,1510159677.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T16:47:57.475Z,1510159677.475 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:47:57.475Z,1510159677.475 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:47:57.476Z,1510159677.476 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T16:47:57.476Z,1510159677.476 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:47:57.477Z,1510159677.477 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:47:57.477Z,1510159677.477 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T16:47:57.477Z,1510159677.477 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:47:57.478Z,1510159677.478 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:47:57.830Z,1510159677.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:57.862Z,1510159677.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T16:47:57.862Z,1510159677.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:58.241Z,1510159678.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:58.268Z,1510159678.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T16:47:58.269Z,1510159678.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:58.642Z,1510159678.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:58.671Z,1510159678.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T16:47:58.672Z,1510159678.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:59.027Z,1510159679.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:59.043Z,1510159679.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T16:47:59.044Z,1510159679.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:59.427Z,1510159679.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:59.443Z,1510159679.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T16:47:59.443Z,1510159679.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:47:59.827Z,1510159679.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:47:59.843Z,1510159679.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T16:47:59.844Z,1510159679.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:00.227Z,1510159680.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:00.243Z,1510159680.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T16:48:00.244Z,1510159680.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:00.622Z,1510159680.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:00.638Z,1510159680.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T16:48:00.639Z,1510159680.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:01.038Z,1510159681.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:01.068Z,1510159681.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T16:48:01.069Z,1510159681.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:01.438Z,1510159681.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:01.468Z,1510159681.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T16:48:01.469Z,1510159681.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:01.837Z,1510159681.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:01.868Z,1510159681.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T16:48:01.869Z,1510159681.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:02.227Z,1510159682.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:02.243Z,1510159682.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T16:48:02.244Z,1510159682.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:02.627Z,1510159682.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:02.643Z,1510159682.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T16:48:02.644Z,1510159682.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:03.028Z,1510159683.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:03.044Z,1510159683.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T16:48:03.045Z,1510159683.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:03.423Z,1510159683.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:03.443Z,1510159683.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T16:48:03.444Z,1510159683.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:03.838Z,1510159683.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:03.868Z,1510159683.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T16:48:03.869Z,1510159683.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:04.237Z,1510159684.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:04.268Z,1510159684.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T16:48:04.269Z,1510159684.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:04.638Z,1510159684.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:04.667Z,1510159684.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T16:48:04.668Z,1510159684.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:05.028Z,1510159685.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:05.044Z,1510159685.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T16:48:05.045Z,1510159685.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:05.424Z,1510159685.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:05.443Z,1510159685.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T16:48:05.444Z,1510159685.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:05.842Z,1510159685.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:05.872Z,1510159685.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T16:48:05.873Z,1510159685.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:06.242Z,1510159686.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:06.272Z,1510159686.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T16:48:06.273Z,1510159686.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:06.645Z,1510159686.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:06.675Z,1510159686.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T16:48:06.676Z,1510159686.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:07.024Z,1510159687.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:07.040Z,1510159687.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T16:48:07.041Z,1510159687.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:07.428Z,1510159687.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:07.444Z,1510159687.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T16:48:07.445Z,1510159687.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:07.827Z,1510159687.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:07.843Z,1510159687.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T16:48:07.844Z,1510159687.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:08.228Z,1510159688.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:08.251Z,1510159688.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T16:48:08.252Z,1510159688.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:08.627Z,1510159688.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:08.643Z,1510159688.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T16:48:08.645Z,1510159688.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:09.038Z,1510159689.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:09.097Z,1510159689.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T16:48:09.098Z,1510159689.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:09.434Z,1510159689.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:09.498Z,1510159689.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T16:48:09.499Z,1510159689.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:09.839Z,1510159689.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:09.855Z,1510159689.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T16:48:09.856Z,1510159689.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:10.231Z,1510159690.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:10.248Z,1510159690.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T16:48:10.249Z,1510159690.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:10.631Z,1510159690.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:10.683Z,1510159690.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T16:48:10.684Z,1510159690.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:11.031Z,1510159691.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:11.048Z,1510159691.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T16:48:11.049Z,1510159691.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:11.431Z,1510159691.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:11.484Z,1510159691.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T16:48:11.485Z,1510159691.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:11.835Z,1510159691.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:11.856Z,1510159691.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T16:48:11.857Z,1510159691.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:12.238Z,1510159692.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:12.254Z,1510159692.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T16:48:12.255Z,1510159692.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:12.642Z,1510159692.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:12.657Z,1510159692.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T16:48:12.658Z,1510159692.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:13.031Z,1510159693.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:13.048Z,1510159693.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T16:48:13.049Z,1510159693.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:13.427Z,1510159693.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:13.457Z,1510159693.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T16:48:13.458Z,1510159693.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:13.837Z,1510159693.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:13.853Z,1510159693.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T16:48:13.854Z,1510159693.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:14.238Z,1510159694.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:14.254Z,1510159694.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T16:48:14.255Z,1510159694.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:14.635Z,1510159694.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:14.656Z,1510159694.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T16:48:14.657Z,1510159694.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:15.031Z,1510159695.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:15.046Z,1510159695.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T16:48:15.047Z,1510159695.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:15.430Z,1510159695.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:15.446Z,1510159695.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T16:48:15.447Z,1510159695.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:15.833Z,1510159695.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:15.849Z,1510159695.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T16:48:15.850Z,1510159695.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:15.853Z,1510159695.853 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T16:48:15.854Z,1510159695.854 [Default:CheckIn:C.Wait] Stopped
2017-11-08T16:48:15.854Z,1510159695.854 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T16:48:15.854Z,1510159695.854 [Default:CheckIn:D] Running Loop=1
2017-11-08T16:48:16.234Z,1510159696.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:16.250Z,1510159696.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T16:48:16.251Z,1510159696.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:16.255Z,1510159696.255 [Default:CheckIn:D] Stopped
2017-11-08T16:48:16.255Z,1510159696.255 [Default:CheckIn:E] Running Loop=1
2017-11-08T16:48:19.323Z,1510159699.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:19.340Z,1510159699.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:19.343Z,1510159699.343 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 201.587907 min 
2017-11-08T16:48:19.343Z,1510159699.343 [Default:CheckIn:E] Stopped
2017-11-08T16:48:19.343Z,1510159699.343 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T16:48:19.344Z,1510159699.344 [Default:CheckIn] Stopped
2017-11-08T16:48:19.344Z,1510159699.344 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T16:48:19.344Z,1510159699.344 [Default:CheckIn](INFO): Running loop #8
2017-11-08T16:48:19.344Z,1510159699.344 [Default:CheckIn] Running Loop=8
2017-11-08T16:48:19.344Z,1510159699.344 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T16:48:19.344Z,1510159699.344 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T16:48:19.474Z,1510159699.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:19.535Z,1510159699.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:19.869Z,1510159699.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:19.903Z,1510159699.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:20.270Z,1510159700.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:20.303Z,1510159700.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:20.651Z,1510159700.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:20.667Z,1510159700.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:21.048Z,1510159701.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:21.064Z,1510159701.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:21.451Z,1510159701.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:21.468Z,1510159701.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:21.865Z,1510159701.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:21.890Z,1510159701.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:22.261Z,1510159702.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:22.292Z,1510159702.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:22.666Z,1510159702.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:22.689Z,1510159702.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:23.050Z,1510159703.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:23.067Z,1510159703.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:23.452Z,1510159703.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:23.468Z,1510159703.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:23.851Z,1510159703.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:23.868Z,1510159703.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:24.253Z,1510159704.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:24.283Z,1510159704.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:24.654Z,1510159704.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:24.670Z,1510159704.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:25.062Z,1510159705.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:25.094Z,1510159705.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:25.465Z,1510159705.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:25.499Z,1510159705.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:25.865Z,1510159705.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:25.904Z,1510159705.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:26.250Z,1510159706.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:26.267Z,1510159706.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:26.654Z,1510159706.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:26.671Z,1510159706.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:27.054Z,1510159707.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:27.075Z,1510159707.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:27.451Z,1510159707.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:27.467Z,1510159707.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:27.865Z,1510159707.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:27.898Z,1510159707.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:28.265Z,1510159708.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:28.281Z,1510159708.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:28.662Z,1510159708.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:28.678Z,1510159708.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:29.054Z,1510159709.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:29.071Z,1510159709.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:29.458Z,1510159709.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:29.473Z,1510159709.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:29.856Z,1510159709.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:29.873Z,1510159709.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:30.257Z,1510159710.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:30.273Z,1510159710.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:30.657Z,1510159710.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:30.673Z,1510159710.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:31.062Z,1510159711.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:31.078Z,1510159711.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:31.465Z,1510159711.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:31.547Z,1510159711.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:31.865Z,1510159711.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:31.881Z,1510159711.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:32.256Z,1510159712.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:32.311Z,1510159712.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:32.657Z,1510159712.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:32.673Z,1510159712.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:33.058Z,1510159713.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:33.113Z,1510159713.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:33.457Z,1510159713.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:33.473Z,1510159713.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:33.862Z,1510159713.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:33.878Z,1510159713.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:34.261Z,1510159714.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:34.277Z,1510159714.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:34.658Z,1510159714.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:34.680Z,1510159714.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:35.057Z,1510159715.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:35.073Z,1510159715.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:35.454Z,1510159715.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:35.475Z,1510159715.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:35.850Z,1510159715.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:35.878Z,1510159715.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:36.257Z,1510159716.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:36.273Z,1510159716.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:36.656Z,1510159716.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:36.672Z,1510159716.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:37.062Z,1510159717.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:37.078Z,1510159717.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:37.465Z,1510159717.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:37.481Z,1510159717.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:37.865Z,1510159717.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:37.881Z,1510159717.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:38.250Z,1510159718.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:38.279Z,1510159718.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:38.657Z,1510159718.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:38.673Z,1510159718.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:39.058Z,1510159719.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:39.074Z,1510159719.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:39.456Z,1510159719.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:39.472Z,1510159719.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:39.862Z,1510159719.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:39.878Z,1510159719.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:40.265Z,1510159720.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:40.281Z,1510159720.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:40.658Z,1510159720.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:40.680Z,1510159720.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:41.056Z,1510159721.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:41.072Z,1510159721.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:41.457Z,1510159721.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:41.506Z,1510159721.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:41.850Z,1510159721.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:41.878Z,1510159721.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:42.256Z,1510159722.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:42.273Z,1510159722.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:42.656Z,1510159722.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:42.672Z,1510159722.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:43.062Z,1510159723.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:43.078Z,1510159723.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:43.466Z,1510159723.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:43.482Z,1510159723.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:43.865Z,1510159723.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:43.881Z,1510159723.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:44.257Z,1510159724.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:44.274Z,1510159724.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:44.657Z,1510159724.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:44.673Z,1510159724.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:45.058Z,1510159725.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:45.074Z,1510159725.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:45.458Z,1510159725.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:45.475Z,1510159725.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:45.862Z,1510159725.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:45.878Z,1510159725.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:46.261Z,1510159726.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:46.277Z,1510159726.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:46.664Z,1510159726.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:46.680Z,1510159726.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:47.061Z,1510159727.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:47.077Z,1510159727.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:47.455Z,1510159727.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:47.471Z,1510159727.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:47.854Z,1510159727.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:47.875Z,1510159727.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:48.260Z,1510159728.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:48.276Z,1510159728.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:48.661Z,1510159728.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:48.702Z,1510159728.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:49.065Z,1510159729.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:49.082Z,1510159729.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:49.466Z,1510159729.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:49.483Z,1510159729.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:49.867Z,1510159729.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:49.883Z,1510159729.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:50.257Z,1510159730.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:50.280Z,1510159730.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:50.658Z,1510159730.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:50.675Z,1510159730.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:51.056Z,1510159731.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:51.090Z,1510159731.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:51.451Z,1510159731.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:51.488Z,1510159731.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:51.867Z,1510159731.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:51.885Z,1510159731.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:52.266Z,1510159732.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:52.293Z,1510159732.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:52.662Z,1510159732.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:52.690Z,1510159732.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:53.051Z,1510159733.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:53.067Z,1510159733.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:53.451Z,1510159733.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:53.510Z,1510159733.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:53.855Z,1510159733.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:53.919Z,1510159733.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:54.254Z,1510159734.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:54.275Z,1510159734.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:54.655Z,1510159734.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:54.711Z,1510159734.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:55.062Z,1510159735.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:55.078Z,1510159735.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:55.462Z,1510159735.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:55.508Z,1510159735.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:55.866Z,1510159735.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:55.907Z,1510159735.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:56.255Z,1510159736.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:56.271Z,1510159736.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:56.654Z,1510159736.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:56.670Z,1510159736.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:57.055Z,1510159737.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:57.072Z,1510159737.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:57.452Z,1510159737.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:57.469Z,1510159737.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:57.865Z,1510159737.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:57.882Z,1510159737.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:58.262Z,1510159738.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:58.279Z,1510159738.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:58.658Z,1510159738.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:58.674Z,1510159738.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:59.054Z,1510159739.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:59.069Z,1510159739.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:59.454Z,1510159739.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:59.470Z,1510159739.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:48:59.852Z,1510159739.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:48:59.868Z,1510159739.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:00.254Z,1510159740.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:00.270Z,1510159740.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:00.654Z,1510159740.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:00.670Z,1510159740.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:01.058Z,1510159741.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:01.074Z,1510159741.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:01.465Z,1510159741.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:01.481Z,1510159741.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:01.865Z,1510159741.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:01.907Z,1510159741.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:02.253Z,1510159742.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:02.269Z,1510159742.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:02.654Z,1510159742.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:02.669Z,1510159742.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:03.055Z,1510159743.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:03.075Z,1510159743.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:03.452Z,1510159743.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:03.475Z,1510159743.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:03.865Z,1510159743.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:03.905Z,1510159743.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:04.265Z,1510159744.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:04.282Z,1510159744.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:04.662Z,1510159744.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:04.678Z,1510159744.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:05.054Z,1510159745.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:05.070Z,1510159745.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:05.455Z,1510159745.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:05.470Z,1510159745.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:05.854Z,1510159745.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:05.871Z,1510159745.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:06.254Z,1510159746.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:06.270Z,1510159746.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:06.655Z,1510159746.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:06.671Z,1510159746.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:07.058Z,1510159747.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:07.074Z,1510159747.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:07.465Z,1510159747.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:07.481Z,1510159747.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:07.866Z,1510159747.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:07.882Z,1510159747.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:08.254Z,1510159748.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:08.271Z,1510159748.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:08.654Z,1510159748.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:08.669Z,1510159748.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:09.055Z,1510159749.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:09.075Z,1510159749.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:09.456Z,1510159749.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:09.473Z,1510159749.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:09.861Z,1510159749.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:09.877Z,1510159749.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:10.265Z,1510159750.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:10.287Z,1510159750.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:10.658Z,1510159750.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:10.679Z,1510159750.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:11.056Z,1510159751.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:11.072Z,1510159751.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:11.456Z,1510159751.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:11.476Z,1510159751.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:11.857Z,1510159751.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:11.873Z,1510159751.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:12.256Z,1510159752.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:12.272Z,1510159752.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:12.656Z,1510159752.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:12.676Z,1510159752.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:13.062Z,1510159753.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:13.078Z,1510159753.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:13.466Z,1510159753.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:13.487Z,1510159753.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:13.866Z,1510159753.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:13.882Z,1510159753.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:14.257Z,1510159754.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:14.273Z,1510159754.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:14.653Z,1510159754.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:14.675Z,1510159754.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:15.058Z,1510159755.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:15.074Z,1510159755.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:15.457Z,1510159755.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:15.473Z,1510159755.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:15.869Z,1510159755.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:15.948Z,1510159755.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:16.267Z,1510159756.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:16.287Z,1510159756.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:19.351Z,1510159759.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:19.411Z,1510159759.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:19.527Z,1510159759.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:19.567Z,1510159759.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:19.920Z,1510159759.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:19.971Z,1510159759.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:20.320Z,1510159760.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:20.337Z,1510159760.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:20.723Z,1510159760.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:20.739Z,1510159760.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:21.134Z,1510159761.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:21.166Z,1510159761.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:21.537Z,1510159761.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:21.565Z,1510159761.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:21.933Z,1510159761.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:21.966Z,1510159761.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:22.323Z,1510159762.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:22.340Z,1510159762.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:22.716Z,1510159762.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:22.740Z,1510159762.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:23.123Z,1510159763.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:23.139Z,1510159763.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:23.523Z,1510159763.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:23.540Z,1510159763.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:23.933Z,1510159763.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:23.965Z,1510159763.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:24.337Z,1510159764.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:24.367Z,1510159764.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:24.738Z,1510159764.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:24.764Z,1510159764.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:25.116Z,1510159765.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:25.132Z,1510159765.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:25.523Z,1510159765.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:25.538Z,1510159765.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:25.923Z,1510159765.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:25.940Z,1510159765.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:26.324Z,1510159766.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:26.340Z,1510159766.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:26.719Z,1510159766.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:26.734Z,1510159766.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:27.133Z,1510159767.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:27.167Z,1510159767.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:27.529Z,1510159767.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:27.565Z,1510159767.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:27.933Z,1510159767.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:27.966Z,1510159767.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:28.323Z,1510159768.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:28.383Z,1510159768.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:28.724Z,1510159768.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:28.778Z,1510159768.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:29.128Z,1510159769.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:29.168Z,1510159769.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:29.533Z,1510159769.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:29.581Z,1510159769.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:29.936Z,1510159769.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:29.986Z,1510159769.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:30.339Z,1510159770.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:30.371Z,1510159770.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:30.754Z,1510159770.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:30.780Z,1510159770.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:31.115Z,1510159771.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:31.135Z,1510159771.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:31.519Z,1510159771.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:31.534Z,1510159771.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:31.919Z,1510159771.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:31.940Z,1510159771.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:32.320Z,1510159772.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:32.336Z,1510159772.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:32.723Z,1510159772.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:32.739Z,1510159772.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:33.133Z,1510159773.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:33.165Z,1510159773.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:33.538Z,1510159773.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:33.562Z,1510159773.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:33.933Z,1510159773.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:33.967Z,1510159773.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:34.321Z,1510159774.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:34.337Z,1510159774.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:34.719Z,1510159774.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:34.735Z,1510159774.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:35.125Z,1510159775.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:35.141Z,1510159775.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:35.525Z,1510159775.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:35.541Z,1510159775.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:35.931Z,1510159775.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:35.965Z,1510159775.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:36.335Z,1510159776.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:36.365Z,1510159776.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:36.734Z,1510159776.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:36.765Z,1510159776.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:37.119Z,1510159777.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:37.136Z,1510159777.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:37.522Z,1510159777.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:37.539Z,1510159777.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:37.922Z,1510159777.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:37.939Z,1510159777.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:38.319Z,1510159778.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:38.340Z,1510159778.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:38.723Z,1510159778.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:38.739Z,1510159778.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:39.135Z,1510159779.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:39.166Z,1510159779.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:39.534Z,1510159779.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:39.565Z,1510159779.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:39.933Z,1510159779.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:39.963Z,1510159779.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:40.318Z,1510159780.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:40.429Z,1510159780.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:40.722Z,1510159780.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:40.739Z,1510159780.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:41.125Z,1510159781.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:41.174Z,1510159781.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:41.523Z,1510159781.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:41.543Z,1510159781.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:41.930Z,1510159781.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:41.975Z,1510159781.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:42.333Z,1510159782.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:42.349Z,1510159782.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:42.730Z,1510159782.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:42.751Z,1510159782.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:43.128Z,1510159783.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:43.145Z,1510159783.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:43.523Z,1510159783.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:43.542Z,1510159783.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:43.925Z,1510159783.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:43.942Z,1510159783.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:44.329Z,1510159784.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:44.349Z,1510159784.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:44.721Z,1510159784.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:44.745Z,1510159784.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:45.133Z,1510159785.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:45.168Z,1510159785.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:45.531Z,1510159785.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:45.548Z,1510159785.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:45.932Z,1510159785.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:45.948Z,1510159785.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:46.325Z,1510159786.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:46.341Z,1510159786.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:46.727Z,1510159786.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:46.743Z,1510159786.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:47.128Z,1510159787.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:47.143Z,1510159787.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:47.525Z,1510159787.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:47.541Z,1510159787.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:47.930Z,1510159787.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:47.946Z,1510159787.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:48.333Z,1510159788.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:48.349Z,1510159788.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:48.733Z,1510159788.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:48.749Z,1510159788.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:49.121Z,1510159789.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:49.138Z,1510159789.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:49.523Z,1510159789.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:49.539Z,1510159789.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:49.925Z,1510159789.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:49.941Z,1510159789.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:50.328Z,1510159790.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:50.383Z,1510159790.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:50.724Z,1510159790.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:50.740Z,1510159790.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:51.129Z,1510159791.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:51.145Z,1510159791.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:51.539Z,1510159791.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:51.556Z,1510159791.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:51.935Z,1510159791.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:51.951Z,1510159791.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:52.316Z,1510159792.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:52.341Z,1510159792.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:52.725Z,1510159792.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:52.741Z,1510159792.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:53.134Z,1510159793.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:53.150Z,1510159793.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:53.532Z,1510159793.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:53.551Z,1510159793.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:53.939Z,1510159793.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:53.964Z,1510159793.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:54.339Z,1510159794.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:54.355Z,1510159794.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:54.740Z,1510159794.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:54.757Z,1510159794.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:55.129Z,1510159795.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:55.145Z,1510159795.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:55.531Z,1510159795.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:55.551Z,1510159795.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:55.929Z,1510159795.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:55.945Z,1510159795.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:56.328Z,1510159796.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:56.344Z,1510159796.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:56.719Z,1510159796.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:56.746Z,1510159796.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:57.133Z,1510159797.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:57.166Z,1510159797.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:57.534Z,1510159797.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:57.571Z,1510159797.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:57.936Z,1510159797.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:57.967Z,1510159797.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:58.319Z,1510159798.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:58.335Z,1510159798.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:58.719Z,1510159798.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:58.740Z,1510159798.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:59.121Z,1510159799.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:59.137Z,1510159799.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:59.520Z,1510159799.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:59.536Z,1510159799.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:49:59.938Z,1510159799.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:49:59.972Z,1510159799.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:00.340Z,1510159800.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:00.365Z,1510159800.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:00.733Z,1510159800.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:00.762Z,1510159800.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:01.131Z,1510159801.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:01.148Z,1510159801.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:01.522Z,1510159801.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:01.539Z,1510159801.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:01.926Z,1510159801.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:01.942Z,1510159801.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:02.328Z,1510159802.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:02.396Z,1510159802.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:02.725Z,1510159802.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:02.741Z,1510159802.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:03.130Z,1510159803.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:03.183Z,1510159803.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:03.534Z,1510159803.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:03.550Z,1510159803.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:03.930Z,1510159803.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:03.986Z,1510159803.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:04.328Z,1510159804.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:04.355Z,1510159804.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:04.734Z,1510159804.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:04.787Z,1510159804.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:05.129Z,1510159805.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:05.154Z,1510159805.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:05.515Z,1510159805.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:05.540Z,1510159805.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:05.939Z,1510159805.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:05.959Z,1510159805.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:06.335Z,1510159806.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:06.351Z,1510159806.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:06.738Z,1510159806.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:06.754Z,1510159806.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:07.125Z,1510159807.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:07.141Z,1510159807.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:07.522Z,1510159807.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:07.552Z,1510159807.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:07.926Z,1510159807.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:07.941Z,1510159807.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:08.323Z,1510159808.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:08.348Z,1510159808.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:08.723Z,1510159808.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:08.744Z,1510159808.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:09.139Z,1510159809.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:09.157Z,1510159809.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:09.538Z,1510159809.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:09.559Z,1510159809.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:09.936Z,1510159809.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:09.953Z,1510159809.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:10.317Z,1510159810.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:10.351Z,1510159810.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:10.716Z,1510159810.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:10.746Z,1510159810.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:11.120Z,1510159811.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:11.149Z,1510159811.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:11.519Z,1510159811.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:11.546Z,1510159811.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:11.941Z,1510159811.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:11.957Z,1510159811.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:12.344Z,1510159812.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:12.395Z,1510159812.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:12.756Z,1510159812.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:12.772Z,1510159812.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:13.120Z,1510159813.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:13.146Z,1510159813.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:13.524Z,1510159813.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:13.562Z,1510159813.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:13.916Z,1510159813.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:13.952Z,1510159813.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:14.321Z,1510159814.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:14.367Z,1510159814.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:14.719Z,1510159814.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:14.764Z,1510159814.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:15.138Z,1510159815.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:15.165Z,1510159815.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:15.544Z,1510159815.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:15.571Z,1510159815.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:15.930Z,1510159815.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:15.960Z,1510159815.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:16.327Z,1510159816.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:16.344Z,1510159816.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:16.720Z,1510159816.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:16.736Z,1510159816.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:19.961Z,1510159819.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:19.978Z,1510159819.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:20.091Z,1510159820.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:20.120Z,1510159820.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:20.508Z,1510159820.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:20.524Z,1510159820.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:20.916Z,1510159820.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:20.933Z,1510159820.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:21.308Z,1510159821.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:21.324Z,1510159821.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:21.692Z,1510159821.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:21.717Z,1510159821.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:22.088Z,1510159822.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:22.120Z,1510159822.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:22.493Z,1510159822.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:22.524Z,1510159822.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:22.902Z,1510159822.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:22.926Z,1510159822.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:23.305Z,1510159823.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:23.321Z,1510159823.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:23.706Z,1510159823.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:23.735Z,1510159823.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:24.087Z,1510159824.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:24.147Z,1510159824.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:24.492Z,1510159824.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:24.554Z,1510159824.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:24.888Z,1510159824.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:24.905Z,1510159824.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:25.293Z,1510159825.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:25.339Z,1510159825.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:25.691Z,1510159825.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:25.707Z,1510159825.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:26.102Z,1510159826.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:26.152Z,1510159826.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:26.506Z,1510159826.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:26.536Z,1510159826.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:26.906Z,1510159826.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:26.930Z,1510159826.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:27.286Z,1510159827.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:27.323Z,1510159827.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:27.694Z,1510159827.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:27.710Z,1510159827.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:28.099Z,1510159828.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:28.115Z,1510159828.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:28.495Z,1510159828.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:28.512Z,1510159828.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:28.902Z,1510159828.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:28.919Z,1510159828.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:29.299Z,1510159829.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:29.319Z,1510159829.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:29.700Z,1510159829.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:29.716Z,1510159829.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:30.090Z,1510159830.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:30.107Z,1510159830.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:30.491Z,1510159830.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:30.507Z,1510159830.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:30.888Z,1510159830.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:30.919Z,1510159830.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:31.294Z,1510159831.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:31.311Z,1510159831.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:31.690Z,1510159831.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:31.711Z,1510159831.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:32.099Z,1510159832.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:32.119Z,1510159832.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:32.502Z,1510159832.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:32.518Z,1510159832.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:32.898Z,1510159832.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:32.915Z,1510159832.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:33.290Z,1510159833.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:33.306Z,1510159833.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:33.693Z,1510159833.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:33.709Z,1510159833.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:34.090Z,1510159834.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:34.105Z,1510159834.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:34.487Z,1510159834.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:34.535Z,1510159834.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:34.898Z,1510159834.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:34.914Z,1510159834.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:35.299Z,1510159835.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:35.319Z,1510159835.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:35.698Z,1510159835.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:35.720Z,1510159835.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:36.091Z,1510159836.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:36.117Z,1510159836.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:36.491Z,1510159836.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:36.511Z,1510159836.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:36.890Z,1510159836.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:36.907Z,1510159836.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:37.295Z,1510159837.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:37.311Z,1510159837.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:37.691Z,1510159837.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:37.707Z,1510159837.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:38.099Z,1510159838.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:38.116Z,1510159838.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:38.502Z,1510159838.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:38.518Z,1510159838.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:38.899Z,1510159838.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:38.915Z,1510159838.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:39.287Z,1510159839.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:39.309Z,1510159839.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:39.693Z,1510159839.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:39.709Z,1510159839.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:40.090Z,1510159840.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:40.108Z,1510159840.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:40.487Z,1510159840.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:40.509Z,1510159840.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:40.898Z,1510159840.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:40.914Z,1510159840.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:41.298Z,1510159841.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:41.315Z,1510159841.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:41.698Z,1510159841.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:41.721Z,1510159841.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:42.093Z,1510159842.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:42.111Z,1510159842.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:42.490Z,1510159842.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:42.506Z,1510159842.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:42.887Z,1510159842.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:42.916Z,1510159842.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:43.293Z,1510159843.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:43.309Z,1510159843.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:43.694Z,1510159843.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:43.710Z,1510159843.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:44.103Z,1510159844.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:44.120Z,1510159844.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:44.506Z,1510159844.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:44.527Z,1510159844.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:44.903Z,1510159844.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:44.923Z,1510159844.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:45.283Z,1510159845.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:45.316Z,1510159845.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:45.687Z,1510159845.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:45.720Z,1510159845.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:46.084Z,1510159846.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:46.109Z,1510159846.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:46.487Z,1510159846.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:46.556Z,1510159846.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:46.903Z,1510159846.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:46.937Z,1510159846.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:47.307Z,1510159847.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:47.323Z,1510159847.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:47.702Z,1510159847.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:47.719Z,1510159847.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:48.087Z,1510159848.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:48.136Z,1510159848.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:48.487Z,1510159848.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:48.512Z,1510159848.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:48.883Z,1510159848.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:48.931Z,1510159848.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:49.283Z,1510159849.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:49.320Z,1510159849.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:49.687Z,1510159849.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:49.712Z,1510159849.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:50.103Z,1510159850.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:50.120Z,1510159850.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:50.507Z,1510159850.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:50.527Z,1510159850.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:50.907Z,1510159850.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:50.927Z,1510159850.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:51.283Z,1510159851.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:51.319Z,1510159851.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:51.683Z,1510159851.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:51.720Z,1510159851.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:52.088Z,1510159852.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:52.118Z,1510159852.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:52.487Z,1510159852.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:52.518Z,1510159852.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:52.907Z,1510159852.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:52.927Z,1510159852.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:53.308Z,1510159853.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:53.331Z,1510159853.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:53.702Z,1510159853.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:53.723Z,1510159853.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:54.083Z,1510159854.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:54.119Z,1510159854.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:54.487Z,1510159854.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:54.518Z,1510159854.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:54.887Z,1510159854.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:54.918Z,1510159854.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:55.288Z,1510159855.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:55.317Z,1510159855.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:55.687Z,1510159855.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:55.720Z,1510159855.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:56.097Z,1510159856.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:56.129Z,1510159856.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:56.497Z,1510159856.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:56.521Z,1510159856.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:56.909Z,1510159856.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:56.971Z,1510159856.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:57.287Z,1510159857.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:57.322Z,1510159857.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:57.687Z,1510159857.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:57.721Z,1510159857.721 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:57.721Z,1510159857.721 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69
2017-11-08T16:50:57.721Z,1510159857.721 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T16:50:57.723Z,1510159857.723 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:57.723Z,1510159857.723 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69
2017-11-08T16:50:57.723Z,1510159857.723 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T16:50:57.725Z,1510159857.725 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:57.725Z,1510159857.725 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 69
2017-11-08T16:50:57.725Z,1510159857.725 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T16:50:57.809Z,1510159857.809 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T16:50:57.809Z,1510159857.809 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T16:50:57.810Z,1510159857.810 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T16:50:58.088Z,1510159858.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:58.209Z,1510159858.209 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T16:50:58.209Z,1510159858.209 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69
2017-11-08T16:50:58.209Z,1510159858.209 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T16:50:58.209Z,1510159858.209 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69
2017-11-08T16:50:58.210Z,1510159858.210 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T16:50:58.210Z,1510159858.210 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 69
2017-11-08T16:50:58.483Z,1510159858.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:58.502Z,1510159858.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T16:50:58.503Z,1510159858.503 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:50:58.503Z,1510159858.503 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:50:58.504Z,1510159858.504 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T16:50:58.504Z,1510159858.504 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:50:58.524Z,1510159858.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:50:58.525Z,1510159858.525 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T16:50:58.525Z,1510159858.525 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:50:58.526Z,1510159858.526 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:50:58.897Z,1510159858.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:58.930Z,1510159858.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T16:50:58.931Z,1510159858.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:59.301Z,1510159859.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:59.329Z,1510159859.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T16:50:59.330Z,1510159859.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:50:59.697Z,1510159859.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:50:59.729Z,1510159859.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T16:50:59.730Z,1510159859.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:00.087Z,1510159860.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:00.107Z,1510159860.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T16:51:00.108Z,1510159860.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:00.487Z,1510159860.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:00.503Z,1510159860.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T16:51:00.504Z,1510159860.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:00.886Z,1510159860.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:00.902Z,1510159860.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T16:51:00.903Z,1510159860.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:01.288Z,1510159861.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:01.303Z,1510159861.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T16:51:01.304Z,1510159861.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:01.690Z,1510159861.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:01.706Z,1510159861.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T16:51:01.707Z,1510159861.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:02.102Z,1510159862.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:02.133Z,1510159862.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T16:51:02.134Z,1510159862.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:02.501Z,1510159862.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:02.538Z,1510159862.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T16:51:02.539Z,1510159862.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:02.902Z,1510159862.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:02.933Z,1510159862.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T16:51:02.934Z,1510159862.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:03.288Z,1510159863.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:03.304Z,1510159863.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T16:51:03.305Z,1510159863.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:03.688Z,1510159863.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:03.707Z,1510159863.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T16:51:03.708Z,1510159863.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:04.091Z,1510159864.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:04.107Z,1510159864.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T16:51:04.108Z,1510159864.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:04.489Z,1510159864.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:04.505Z,1510159864.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T16:51:04.506Z,1510159864.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:04.893Z,1510159864.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:04.915Z,1510159864.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T16:51:04.916Z,1510159864.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:05.306Z,1510159865.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:05.341Z,1510159865.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T16:51:05.342Z,1510159865.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:05.698Z,1510159865.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:05.714Z,1510159865.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T16:51:05.715Z,1510159865.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:06.095Z,1510159866.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:06.111Z,1510159866.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T16:51:06.112Z,1510159866.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:06.494Z,1510159866.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:06.510Z,1510159866.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T16:51:06.511Z,1510159866.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:06.890Z,1510159866.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:06.906Z,1510159866.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T16:51:06.907Z,1510159866.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:07.294Z,1510159867.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:07.310Z,1510159867.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T16:51:07.311Z,1510159867.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:07.694Z,1510159867.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:07.710Z,1510159867.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T16:51:07.711Z,1510159867.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:08.070Z,1510159868.070 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T16:51:08.070Z,1510159868.070 [NAL9602] Data Fault, FailCount= 5
2017-11-08T16:51:08.070Z,1510159868.070 [NAL9602](ERROR): Data Fault
2017-11-08T16:51:08.098Z,1510159868.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:08.124Z,1510159868.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T16:51:08.133Z,1510159868.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:08.221Z,1510159868.221 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T16:51:08.221Z,1510159868.221 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-11-08T16:51:08.466Z,1510159868.466 [NAL9602](INFO): Powering down
2017-11-08T16:51:08.496Z,1510159868.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:08.523Z,1510159868.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T16:51:08.524Z,1510159868.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:08.619Z,1510159868.619 [CBIT](INFO): Critical error at 20171108T165108
2017-11-08T16:51:08.890Z,1510159868.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:08.907Z,1510159868.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T16:51:08.908Z,1510159868.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:09.293Z,1510159869.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:09.375Z,1510159869.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T16:51:09.376Z,1510159869.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:09.690Z,1510159869.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:09.706Z,1510159869.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T16:51:09.707Z,1510159869.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:10.089Z,1510159870.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:10.145Z,1510159870.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T16:51:10.146Z,1510159870.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:10.493Z,1510159870.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:10.509Z,1510159870.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T16:51:10.510Z,1510159870.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:10.890Z,1510159870.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:10.944Z,1510159870.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T16:51:10.945Z,1510159870.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:11.292Z,1510159871.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:11.308Z,1510159871.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T16:51:11.309Z,1510159871.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:11.688Z,1510159871.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:11.705Z,1510159871.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T16:51:11.706Z,1510159871.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:12.092Z,1510159872.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:12.108Z,1510159872.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T16:51:12.109Z,1510159872.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:12.489Z,1510159872.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:12.505Z,1510159872.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T16:51:12.506Z,1510159872.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:12.892Z,1510159872.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:12.908Z,1510159872.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T16:51:12.909Z,1510159872.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:13.288Z,1510159873.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:13.303Z,1510159873.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T16:51:13.304Z,1510159873.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:13.692Z,1510159873.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:13.707Z,1510159873.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T16:51:13.708Z,1510159873.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:14.090Z,1510159874.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:14.114Z,1510159874.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T16:51:14.115Z,1510159874.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:14.482Z,1510159874.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:14.511Z,1510159874.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T16:51:14.512Z,1510159874.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:14.882Z,1510159874.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:14.914Z,1510159874.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T16:51:14.915Z,1510159874.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:15.283Z,1510159875.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:15.315Z,1510159875.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T16:51:15.316Z,1510159875.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:15.683Z,1510159875.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:15.711Z,1510159875.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T16:51:15.712Z,1510159875.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:16.083Z,1510159876.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:16.107Z,1510159876.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T16:51:16.108Z,1510159876.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:16.498Z,1510159876.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:16.513Z,1510159876.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T16:51:16.514Z,1510159876.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:19.574Z,1510159879.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:19.625Z,1510159879.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:19.751Z,1510159879.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:19.767Z,1510159879.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:20.153Z,1510159880.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:20.170Z,1510159880.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:20.549Z,1510159880.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:20.565Z,1510159880.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:20.945Z,1510159880.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:20.961Z,1510159880.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:21.349Z,1510159881.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:21.365Z,1510159881.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:21.745Z,1510159881.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:21.761Z,1510159881.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:22.143Z,1510159882.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:22.165Z,1510159882.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:22.542Z,1510159882.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:22.572Z,1510159882.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:22.944Z,1510159882.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:22.960Z,1510159882.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:23.348Z,1510159883.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:23.365Z,1510159883.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:23.746Z,1510159883.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:23.768Z,1510159883.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:24.144Z,1510159884.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:24.168Z,1510159884.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:24.545Z,1510159884.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:24.561Z,1510159884.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:24.947Z,1510159884.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:24.967Z,1510159884.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:25.344Z,1510159885.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:25.359Z,1510159885.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:25.745Z,1510159885.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:25.761Z,1510159885.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:26.147Z,1510159886.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:26.163Z,1510159886.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:26.543Z,1510159886.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:26.559Z,1510159886.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:26.942Z,1510159886.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:26.972Z,1510159886.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:27.348Z,1510159887.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:27.365Z,1510159887.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:27.748Z,1510159887.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:27.764Z,1510159887.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:28.148Z,1510159888.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:28.165Z,1510159888.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:28.546Z,1510159888.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:28.567Z,1510159888.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:28.944Z,1510159888.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:28.967Z,1510159888.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:29.348Z,1510159889.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:29.364Z,1510159889.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:29.748Z,1510159889.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:29.765Z,1510159889.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:30.143Z,1510159890.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:30.163Z,1510159890.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:30.548Z,1510159890.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:30.565Z,1510159890.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:30.948Z,1510159890.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:30.965Z,1510159890.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:31.343Z,1510159891.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:31.359Z,1510159891.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:31.744Z,1510159891.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:31.827Z,1510159891.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:32.147Z,1510159892.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:32.164Z,1510159892.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:32.544Z,1510159892.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:32.584Z,1510159892.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:32.948Z,1510159892.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:32.964Z,1510159892.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:33.348Z,1510159893.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:33.405Z,1510159893.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:33.748Z,1510159893.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:33.763Z,1510159893.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:34.144Z,1510159894.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:34.160Z,1510159894.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:34.549Z,1510159894.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:34.565Z,1510159894.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:34.944Z,1510159894.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:34.959Z,1510159894.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:35.348Z,1510159895.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:35.365Z,1510159895.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:35.748Z,1510159895.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:35.764Z,1510159895.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:36.144Z,1510159896.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:36.159Z,1510159896.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:36.544Z,1510159896.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:36.560Z,1510159896.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:36.947Z,1510159896.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:36.963Z,1510159896.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:37.344Z,1510159897.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:37.367Z,1510159897.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:37.743Z,1510159897.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:37.760Z,1510159897.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:38.148Z,1510159898.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:38.164Z,1510159898.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:38.544Z,1510159898.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:38.560Z,1510159898.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:38.944Z,1510159898.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:38.960Z,1510159898.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:39.348Z,1510159899.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:39.364Z,1510159899.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:39.744Z,1510159899.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:39.759Z,1510159899.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:40.144Z,1510159900.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:40.160Z,1510159900.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:40.548Z,1510159900.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:40.572Z,1510159900.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:40.944Z,1510159900.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:40.960Z,1510159900.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:41.344Z,1510159901.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:41.360Z,1510159901.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:41.747Z,1510159901.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:41.805Z,1510159901.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:42.148Z,1510159902.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:42.164Z,1510159902.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:42.548Z,1510159902.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:42.565Z,1510159902.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:42.948Z,1510159902.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:42.964Z,1510159902.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:43.344Z,1510159903.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:43.360Z,1510159903.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:43.748Z,1510159903.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:43.765Z,1510159903.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:44.148Z,1510159904.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:44.164Z,1510159904.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:44.544Z,1510159904.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:44.560Z,1510159904.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:44.944Z,1510159904.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:44.960Z,1510159904.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:45.347Z,1510159905.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:45.363Z,1510159905.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:45.744Z,1510159905.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:45.760Z,1510159905.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:46.144Z,1510159906.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:46.160Z,1510159906.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:46.548Z,1510159906.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:46.564Z,1510159906.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:46.944Z,1510159906.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:46.960Z,1510159906.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:47.349Z,1510159907.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:47.365Z,1510159907.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:47.747Z,1510159907.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:47.767Z,1510159907.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:48.145Z,1510159908.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:48.160Z,1510159908.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:48.544Z,1510159908.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:48.561Z,1510159908.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:48.949Z,1510159908.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:48.965Z,1510159908.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:49.345Z,1510159909.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:49.360Z,1510159909.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:49.750Z,1510159909.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:49.772Z,1510159909.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:50.147Z,1510159910.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:50.169Z,1510159910.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:50.545Z,1510159910.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:50.563Z,1510159910.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:50.950Z,1510159910.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:50.967Z,1510159910.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:51.349Z,1510159911.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:51.365Z,1510159911.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:51.745Z,1510159911.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:51.761Z,1510159911.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:52.142Z,1510159912.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:52.165Z,1510159912.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:52.552Z,1510159912.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:52.576Z,1510159912.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:52.945Z,1510159912.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:52.964Z,1510159912.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:53.350Z,1510159913.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:53.367Z,1510159913.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:53.745Z,1510159913.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:53.831Z,1510159913.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:54.146Z,1510159914.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:54.167Z,1510159914.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:54.549Z,1510159914.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:54.605Z,1510159914.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:54.949Z,1510159914.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:54.972Z,1510159914.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:55.344Z,1510159915.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:55.388Z,1510159915.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:55.744Z,1510159915.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:55.761Z,1510159915.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:56.148Z,1510159916.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:56.165Z,1510159916.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:56.548Z,1510159916.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:56.564Z,1510159916.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:56.945Z,1510159916.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:56.961Z,1510159916.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:57.349Z,1510159917.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:57.373Z,1510159917.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:57.744Z,1510159917.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:57.760Z,1510159917.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:58.145Z,1510159918.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:58.161Z,1510159918.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:58.548Z,1510159918.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:58.564Z,1510159918.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:58.944Z,1510159918.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:58.960Z,1510159918.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:59.346Z,1510159919.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:59.362Z,1510159919.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:51:59.747Z,1510159919.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:51:59.773Z,1510159919.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:00.145Z,1510159920.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:00.161Z,1510159920.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:00.545Z,1510159920.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:00.561Z,1510159920.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:00.949Z,1510159920.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:00.964Z,1510159920.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:01.346Z,1510159921.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:01.362Z,1510159921.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:01.745Z,1510159921.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:01.762Z,1510159921.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:02.148Z,1510159922.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:02.165Z,1510159922.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:02.544Z,1510159922.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:02.560Z,1510159922.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:02.944Z,1510159922.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:02.961Z,1510159922.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:03.343Z,1510159923.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:03.360Z,1510159923.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:03.744Z,1510159923.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:03.785Z,1510159923.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:04.148Z,1510159924.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:04.164Z,1510159924.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:04.548Z,1510159924.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:04.564Z,1510159924.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:04.944Z,1510159924.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:04.967Z,1510159924.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:05.345Z,1510159925.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:05.361Z,1510159925.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:05.748Z,1510159925.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:05.764Z,1510159925.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:06.144Z,1510159926.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:06.160Z,1510159926.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:06.545Z,1510159926.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:06.561Z,1510159926.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:06.948Z,1510159926.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:06.972Z,1510159926.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:07.344Z,1510159927.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:07.360Z,1510159927.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:07.745Z,1510159927.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:07.761Z,1510159927.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:08.148Z,1510159928.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:08.163Z,1510159928.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:08.548Z,1510159928.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:08.563Z,1510159928.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:08.944Z,1510159928.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:08.960Z,1510159928.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:09.344Z,1510159929.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:09.367Z,1510159929.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:09.748Z,1510159929.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:09.763Z,1510159929.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:10.144Z,1510159930.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:10.160Z,1510159930.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:10.548Z,1510159930.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:10.564Z,1510159930.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:10.948Z,1510159930.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:10.964Z,1510159930.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:11.344Z,1510159931.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:11.361Z,1510159931.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:11.748Z,1510159931.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:11.772Z,1510159931.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:12.148Z,1510159932.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:12.164Z,1510159932.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:12.548Z,1510159932.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:12.565Z,1510159932.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:12.948Z,1510159932.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:12.972Z,1510159932.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:13.348Z,1510159933.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:13.364Z,1510159933.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:13.745Z,1510159933.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:13.767Z,1510159933.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:14.146Z,1510159934.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:14.167Z,1510159934.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:14.548Z,1510159934.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:14.572Z,1510159934.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:14.944Z,1510159934.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:14.960Z,1510159934.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:15.348Z,1510159935.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:15.364Z,1510159935.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:15.746Z,1510159935.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:15.847Z,1510159935.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:16.139Z,1510159936.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:16.164Z,1510159936.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:16.552Z,1510159936.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:16.568Z,1510159936.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:19.625Z,1510159939.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:19.682Z,1510159939.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:19.818Z,1510159939.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:19.835Z,1510159939.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:20.213Z,1510159940.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:20.259Z,1510159940.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:20.618Z,1510159940.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:20.633Z,1510159940.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:21.011Z,1510159941.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:21.027Z,1510159941.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:21.413Z,1510159941.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:21.429Z,1510159941.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:21.814Z,1510159941.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:21.830Z,1510159941.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:22.213Z,1510159942.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:22.230Z,1510159942.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:22.613Z,1510159942.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:22.629Z,1510159942.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:23.014Z,1510159943.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:23.030Z,1510159943.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:23.413Z,1510159943.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:23.429Z,1510159943.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:23.814Z,1510159943.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:23.829Z,1510159943.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:24.214Z,1510159944.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:24.230Z,1510159944.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:24.611Z,1510159944.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:24.628Z,1510159944.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:25.013Z,1510159945.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:25.029Z,1510159945.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:25.414Z,1510159945.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:25.430Z,1510159945.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:25.812Z,1510159945.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:25.828Z,1510159945.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:26.213Z,1510159946.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:26.229Z,1510159946.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:26.614Z,1510159946.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:26.630Z,1510159946.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:27.012Z,1510159947.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:27.028Z,1510159947.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:27.413Z,1510159947.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:27.429Z,1510159947.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:27.814Z,1510159947.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:27.830Z,1510159947.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:28.214Z,1510159948.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:28.230Z,1510159948.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:28.614Z,1510159948.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:28.664Z,1510159948.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:29.014Z,1510159949.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:29.031Z,1510159949.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:29.414Z,1510159949.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:29.430Z,1510159949.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:29.814Z,1510159949.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:29.830Z,1510159949.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:30.214Z,1510159950.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:30.231Z,1510159950.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:30.612Z,1510159950.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:30.629Z,1510159950.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:31.014Z,1510159951.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:31.030Z,1510159951.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:31.410Z,1510159951.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:31.435Z,1510159951.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:31.816Z,1510159951.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:31.832Z,1510159951.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:32.216Z,1510159952.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:32.231Z,1510159952.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:32.617Z,1510159952.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:32.633Z,1510159952.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:33.018Z,1510159953.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:33.034Z,1510159953.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:33.418Z,1510159953.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:33.434Z,1510159953.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:33.817Z,1510159953.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:33.833Z,1510159953.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:34.217Z,1510159954.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:34.233Z,1510159954.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:34.617Z,1510159954.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:34.633Z,1510159954.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:35.018Z,1510159955.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:35.034Z,1510159955.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:35.413Z,1510159955.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:35.430Z,1510159955.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:35.815Z,1510159955.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:35.847Z,1510159955.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:36.218Z,1510159956.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:36.234Z,1510159956.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:36.613Z,1510159956.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:36.629Z,1510159956.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:37.018Z,1510159957.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:37.034Z,1510159957.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:37.421Z,1510159957.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:37.438Z,1510159957.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:37.813Z,1510159957.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:37.830Z,1510159957.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:38.215Z,1510159958.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:38.239Z,1510159958.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:38.618Z,1510159958.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:38.634Z,1510159958.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:39.006Z,1510159959.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:39.038Z,1510159959.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:39.418Z,1510159959.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:39.437Z,1510159959.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:39.817Z,1510159959.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:39.834Z,1510159959.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:40.217Z,1510159960.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:40.283Z,1510159960.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:40.609Z,1510159960.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:40.655Z,1510159960.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:41.006Z,1510159961.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:41.031Z,1510159961.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:41.410Z,1510159961.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:41.463Z,1510159961.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:41.810Z,1510159961.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:41.843Z,1510159961.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:42.206Z,1510159962.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:42.249Z,1510159962.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:42.606Z,1510159962.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:42.638Z,1510159962.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:43.010Z,1510159963.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:43.046Z,1510159963.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:43.410Z,1510159963.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:43.426Z,1510159963.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:43.806Z,1510159963.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:43.823Z,1510159963.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:44.207Z,1510159964.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:44.227Z,1510159964.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:44.607Z,1510159964.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:44.623Z,1510159964.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:45.007Z,1510159965.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:45.023Z,1510159965.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:45.411Z,1510159965.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:45.427Z,1510159965.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:45.807Z,1510159965.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:45.823Z,1510159965.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:46.206Z,1510159966.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:46.227Z,1510159966.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:46.610Z,1510159966.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:46.627Z,1510159966.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:47.006Z,1510159967.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:47.023Z,1510159967.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:47.406Z,1510159967.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:47.423Z,1510159967.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:47.810Z,1510159967.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:47.827Z,1510159967.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:48.207Z,1510159968.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:48.222Z,1510159968.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:48.606Z,1510159968.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:48.623Z,1510159968.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:49.006Z,1510159969.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:49.048Z,1510159969.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:49.406Z,1510159969.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:49.422Z,1510159969.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:49.810Z,1510159969.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:49.842Z,1510159969.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:50.210Z,1510159970.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:50.226Z,1510159970.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:50.606Z,1510159970.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:50.652Z,1510159970.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:51.006Z,1510159971.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:51.023Z,1510159971.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:51.406Z,1510159971.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:51.427Z,1510159971.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:51.806Z,1510159971.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:51.827Z,1510159971.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:52.206Z,1510159972.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:52.223Z,1510159972.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:52.610Z,1510159972.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:52.652Z,1510159972.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:52.733Z,1510159972.733 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T16:52:53.006Z,1510159973.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:53.022Z,1510159973.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:53.410Z,1510159973.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:53.427Z,1510159973.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:53.806Z,1510159973.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:53.822Z,1510159973.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:54.210Z,1510159974.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:54.226Z,1510159974.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:54.606Z,1510159974.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:54.623Z,1510159974.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:55.010Z,1510159975.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:55.026Z,1510159975.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:55.410Z,1510159975.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:55.426Z,1510159975.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:55.807Z,1510159975.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:55.823Z,1510159975.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:56.206Z,1510159976.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:56.222Z,1510159976.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:56.606Z,1510159976.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:56.622Z,1510159976.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:57.010Z,1510159977.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:57.027Z,1510159977.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:57.410Z,1510159977.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:57.426Z,1510159977.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:57.810Z,1510159977.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:57.826Z,1510159977.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:58.211Z,1510159978.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:58.252Z,1510159978.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:58.610Z,1510159978.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:58.626Z,1510159978.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:59.006Z,1510159979.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:59.022Z,1510159979.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:59.411Z,1510159979.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:59.432Z,1510159979.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:52:59.814Z,1510159979.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:52:59.835Z,1510159979.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:00.214Z,1510159980.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:00.230Z,1510159980.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:00.615Z,1510159980.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:00.636Z,1510159980.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:01.013Z,1510159981.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:01.029Z,1510159981.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:01.413Z,1510159981.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:01.429Z,1510159981.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:01.814Z,1510159981.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:01.830Z,1510159981.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:02.214Z,1510159982.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:02.276Z,1510159982.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:02.609Z,1510159982.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:02.625Z,1510159982.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:03.014Z,1510159983.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:03.030Z,1510159983.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:03.413Z,1510159983.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:03.429Z,1510159983.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:03.811Z,1510159983.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:03.826Z,1510159983.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:04.216Z,1510159984.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:04.232Z,1510159984.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:04.614Z,1510159984.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:04.630Z,1510159984.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:05.011Z,1510159985.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:05.027Z,1510159985.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:05.414Z,1510159985.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:05.430Z,1510159985.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:05.814Z,1510159985.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:05.822Z,1510159985.822 [BPC1](ERROR): Failed to receive battery data
2017-11-08T16:53:05.822Z,1510159985.822 [BPC1] Communications Fault, FailCount= 1
2017-11-08T16:53:05.822Z,1510159985.822 [BPC1](ERROR): Communications Fault
2017-11-08T16:53:05.831Z,1510159985.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:05.937Z,1510159985.937 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T16:53:06.213Z,1510159986.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:06.230Z,1510159986.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:06.614Z,1510159986.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:06.630Z,1510159986.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:07.014Z,1510159987.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:07.030Z,1510159987.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:07.125Z,1510159987.125 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T16:53:07.125Z,1510159987.125 [BPC1] No Fault, FailCount= 1
2017-11-08T16:53:07.409Z,1510159987.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:07.487Z,1510159987.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:07.814Z,1510159987.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:07.831Z,1510159987.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:08.215Z,1510159988.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:08.235Z,1510159988.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:08.337Z,1510159988.337 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T16:53:08.337Z,1510159988.337 [NAL9602] No Fault, FailCount= 5
2017-11-08T16:53:08.594Z,1510159988.594 [NAL9602](INFO): Powering up NAL9602
2017-11-08T16:53:08.611Z,1510159988.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:08.627Z,1510159988.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:09.015Z,1510159989.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:09.035Z,1510159989.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:09.414Z,1510159989.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:09.431Z,1510159989.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:09.814Z,1510159989.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:09.830Z,1510159989.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:10.212Z,1510159990.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:10.231Z,1510159990.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:10.615Z,1510159990.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:10.635Z,1510159990.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:11.010Z,1510159991.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:11.026Z,1510159991.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:11.415Z,1510159991.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:11.435Z,1510159991.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:11.815Z,1510159991.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:11.835Z,1510159991.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:12.212Z,1510159992.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:12.235Z,1510159992.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:12.615Z,1510159992.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:12.635Z,1510159992.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:13.015Z,1510159993.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:13.031Z,1510159993.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:13.415Z,1510159993.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:13.431Z,1510159993.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:13.815Z,1510159993.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:13.832Z,1510159993.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:14.215Z,1510159994.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:14.231Z,1510159994.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:14.611Z,1510159994.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:14.627Z,1510159994.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:15.015Z,1510159995.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:15.035Z,1510159995.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:15.415Z,1510159995.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:15.431Z,1510159995.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:15.815Z,1510159995.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:15.869Z,1510159995.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:16.224Z,1510159996.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:16.261Z,1510159996.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:16.616Z,1510159996.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:16.633Z,1510159996.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:19.705Z,1510159999.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:19.721Z,1510159999.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:19.724Z,1510159999.724 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T16:48:19.3Z
2017-11-08T16:53:19.725Z,1510159999.725 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T16:53:19.725Z,1510159999.725 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T16:53:19.853Z,1510159999.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:19.891Z,1510159999.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:20.496Z,1510160000.496 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171108T132236/Courier0032.lzma
2017-11-08T16:53:20.500Z,1510160000.500 [NAL9602](INFO): NAL9602 initialized
2017-11-08T16:53:20.518Z,1510160000.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:20.534Z,1510160000.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:20.670Z,1510160000.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:20.711Z,1510160000.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:21.078Z,1510160001.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:21.113Z,1510160001.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:21.437Z,1510160001.437 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0032.lzma.bak
2017-11-08T16:53:21.437Z,1510160001.437 [DataOverHttps](INFO): SBD MOMSN=5223026
2017-11-08T16:53:21.489Z,1510160001.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:21.513Z,1510160001.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:22.408Z,1510160002.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:22.426Z,1510160002.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:22.539Z,1510160002.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:22.570Z,1510160002.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:25.744Z,1510160005.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:25.769Z,1510160005.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:25.878Z,1510160005.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:25.923Z,1510160005.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:26.305Z,1510160006.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:26.321Z,1510160006.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:26.704Z,1510160006.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:26.751Z,1510160006.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:27.098Z,1510160007.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:27.122Z,1510160007.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:27.486Z,1510160007.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:27.503Z,1510160007.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:27.887Z,1510160007.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:27.931Z,1510160007.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:30.976Z,1510160010.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:30.999Z,1510160010.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:31.130Z,1510160011.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:31.188Z,1510160011.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:31.500Z,1510160011.500 [DataOverHttps](INFO): Sending 219 bytes from file Logs/20171108T132236/Express0033.lzma
2017-11-08T16:53:31.536Z,1510160011.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:31.553Z,1510160011.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:31.931Z,1510160011.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:31.952Z,1510160011.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:32.297Z,1510160012.297 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0033.lzma.bak
2017-11-08T16:53:32.297Z,1510160012.297 [DataOverHttps](INFO): SBD MOMSN=5223029
2017-11-08T16:53:32.340Z,1510160012.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:32.369Z,1510160012.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:33.251Z,1510160013.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:33.275Z,1510160013.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:33.278Z,1510160013.278 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T16:53:33.278Z,1510160013.278 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T16:53:33.278Z,1510160013.278 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T16:53:33.400Z,1510160013.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:33.435Z,1510160013.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:36.502Z,1510160016.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:36.527Z,1510160016.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:36.669Z,1510160016.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:36.703Z,1510160016.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:37.072Z,1510160017.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:37.088Z,1510160017.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:37.468Z,1510160017.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:37.484Z,1510160017.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:37.843Z,1510160017.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:37.878Z,1510160017.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:38.247Z,1510160018.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:38.278Z,1510160018.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:38.648Z,1510160018.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:38.676Z,1510160018.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:39.043Z,1510160019.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:39.077Z,1510160019.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:39.464Z,1510160019.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:39.527Z,1510160019.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:39.868Z,1510160019.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:39.886Z,1510160019.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:40.264Z,1510160020.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:40.287Z,1510160020.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:40.647Z,1510160020.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:40.678Z,1510160020.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:41.047Z,1510160021.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:41.078Z,1510160021.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:41.444Z,1510160021.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:41.476Z,1510160021.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:41.847Z,1510160021.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:41.881Z,1510160021.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:42.269Z,1510160022.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:42.285Z,1510160022.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:42.657Z,1510160022.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:42.690Z,1510160022.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:43.058Z,1510160023.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:43.089Z,1510160023.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:43.443Z,1510160023.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:43.484Z,1510160023.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:43.843Z,1510160023.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:43.883Z,1510160023.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:44.248Z,1510160024.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:44.340Z,1510160024.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:44.645Z,1510160024.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:44.738Z,1510160024.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:45.043Z,1510160025.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:45.063Z,1510160025.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:45.458Z,1510160025.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:45.484Z,1510160025.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:45.861Z,1510160025.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:45.886Z,1510160025.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:46.258Z,1510160026.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:46.284Z,1510160026.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:46.647Z,1510160026.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:46.664Z,1510160026.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:47.044Z,1510160027.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:47.060Z,1510160027.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:47.448Z,1510160027.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:47.492Z,1510160027.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:47.851Z,1510160027.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:47.872Z,1510160027.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:48.260Z,1510160028.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:48.293Z,1510160028.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:48.662Z,1510160028.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:48.740Z,1510160028.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:49.062Z,1510160029.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:49.078Z,1510160029.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:49.454Z,1510160029.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:49.475Z,1510160029.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:49.850Z,1510160029.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:49.867Z,1510160029.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:50.250Z,1510160030.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:50.266Z,1510160030.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:50.650Z,1510160030.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:50.714Z,1510160030.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:51.047Z,1510160031.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:51.068Z,1510160031.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:51.458Z,1510160031.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:51.523Z,1510160031.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:51.861Z,1510160031.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:51.877Z,1510160031.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:52.259Z,1510160032.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:52.314Z,1510160032.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:52.653Z,1510160032.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:52.669Z,1510160032.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:53.050Z,1510160033.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:53.100Z,1510160033.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:53.454Z,1510160033.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:53.470Z,1510160033.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:53.853Z,1510160033.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:53.869Z,1510160033.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:54.259Z,1510160034.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:54.275Z,1510160034.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:54.659Z,1510160034.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:54.680Z,1510160034.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:55.059Z,1510160035.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:55.080Z,1510160035.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:55.450Z,1510160035.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:55.466Z,1510160035.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:55.847Z,1510160035.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:55.869Z,1510160035.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:56.253Z,1510160036.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:56.269Z,1510160036.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:56.651Z,1510160036.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:56.667Z,1510160036.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:57.048Z,1510160037.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:57.078Z,1510160037.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:57.459Z,1510160037.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:57.480Z,1510160037.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:57.860Z,1510160037.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:57.875Z,1510160037.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:58.261Z,1510160038.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:58.277Z,1510160038.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:58.653Z,1510160038.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:58.670Z,1510160038.670 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:58.670Z,1510160038.670 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70
2017-11-08T16:53:58.670Z,1510160038.670 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T16:53:58.672Z,1510160038.672 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:58.672Z,1510160038.672 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70
2017-11-08T16:53:58.672Z,1510160038.672 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T16:53:58.674Z,1510160038.674 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:53:58.674Z,1510160038.674 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 70
2017-11-08T16:53:58.674Z,1510160038.674 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T16:53:58.753Z,1510160038.753 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T16:53:58.753Z,1510160038.753 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T16:53:58.753Z,1510160038.753 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T16:53:59.043Z,1510160039.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:59.153Z,1510160039.153 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T16:53:59.153Z,1510160039.153 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70
2017-11-08T16:53:59.153Z,1510160039.153 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T16:53:59.153Z,1510160039.153 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70
2017-11-08T16:53:59.154Z,1510160039.154 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T16:53:59.154Z,1510160039.154 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 70
2017-11-08T16:53:59.444Z,1510160039.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:59.478Z,1510160039.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T16:53:59.479Z,1510160039.479 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:53:59.479Z,1510160039.479 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:53:59.479Z,1510160039.479 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T16:53:59.480Z,1510160039.480 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:53:59.480Z,1510160039.480 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:53:59.481Z,1510160039.481 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T16:53:59.481Z,1510160039.481 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:53:59.481Z,1510160039.481 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:53:59.843Z,1510160039.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:53:59.874Z,1510160039.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T16:53:59.875Z,1510160039.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:00.268Z,1510160040.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:00.284Z,1510160040.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T16:54:00.285Z,1510160040.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:00.665Z,1510160040.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:00.681Z,1510160040.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T16:54:00.682Z,1510160040.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:01.065Z,1510160041.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:01.081Z,1510160041.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T16:54:01.082Z,1510160041.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:01.443Z,1510160041.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:01.493Z,1510160041.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T16:54:01.494Z,1510160041.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:01.843Z,1510160041.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:01.870Z,1510160041.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T16:54:01.871Z,1510160041.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:02.247Z,1510160042.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:02.273Z,1510160042.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T16:54:02.274Z,1510160042.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:02.644Z,1510160042.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:02.671Z,1510160042.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T16:54:02.672Z,1510160042.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:03.047Z,1510160043.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:03.079Z,1510160043.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T16:54:03.080Z,1510160043.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:03.469Z,1510160043.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:03.485Z,1510160043.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T16:54:03.486Z,1510160043.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:03.863Z,1510160043.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:03.883Z,1510160043.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T16:54:03.884Z,1510160043.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:04.264Z,1510160044.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:04.281Z,1510160044.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T16:54:04.282Z,1510160044.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:04.644Z,1510160044.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:04.675Z,1510160044.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T16:54:04.676Z,1510160044.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:05.044Z,1510160045.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:05.069Z,1510160045.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T16:54:05.070Z,1510160045.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:05.445Z,1510160045.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:05.478Z,1510160045.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T16:54:05.478Z,1510160045.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:05.847Z,1510160045.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:05.871Z,1510160045.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T16:54:05.872Z,1510160045.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:06.265Z,1510160046.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:06.280Z,1510160046.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T16:54:06.281Z,1510160046.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:06.664Z,1510160046.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:06.683Z,1510160046.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T16:54:06.684Z,1510160046.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:07.059Z,1510160047.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:07.075Z,1510160047.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T16:54:07.076Z,1510160047.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:07.443Z,1510160047.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:07.479Z,1510160047.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T16:54:07.480Z,1510160047.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:07.843Z,1510160047.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:07.875Z,1510160047.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T16:54:07.876Z,1510160047.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:08.243Z,1510160048.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:08.276Z,1510160048.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T16:54:08.277Z,1510160048.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:08.648Z,1510160048.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:08.678Z,1510160048.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T16:54:08.679Z,1510160048.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:09.047Z,1510160049.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:09.077Z,1510160049.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T16:54:09.078Z,1510160049.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:09.464Z,1510160049.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:09.480Z,1510160049.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T16:54:09.481Z,1510160049.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:09.864Z,1510160049.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:09.883Z,1510160049.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T16:54:09.884Z,1510160049.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:10.264Z,1510160050.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:10.280Z,1510160050.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T16:54:10.281Z,1510160050.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:10.647Z,1510160050.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:10.675Z,1510160050.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T16:54:10.676Z,1510160050.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:11.047Z,1510160051.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:11.084Z,1510160051.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T16:54:11.085Z,1510160051.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:11.444Z,1510160051.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:11.473Z,1510160051.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T16:54:11.474Z,1510160051.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:11.847Z,1510160051.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:11.902Z,1510160051.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T16:54:11.903Z,1510160051.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:12.257Z,1510160052.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:12.290Z,1510160052.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T16:54:12.291Z,1510160052.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:12.658Z,1510160052.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:12.684Z,1510160052.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T16:54:12.685Z,1510160052.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:13.053Z,1510160053.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:13.077Z,1510160053.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T16:54:13.078Z,1510160053.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:13.443Z,1510160053.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:13.511Z,1510160053.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T16:54:13.512Z,1510160053.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:13.847Z,1510160053.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:13.867Z,1510160053.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T16:54:13.868Z,1510160053.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:14.246Z,1510160054.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:14.295Z,1510160054.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T16:54:14.296Z,1510160054.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:14.651Z,1510160054.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:14.671Z,1510160054.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T16:54:14.672Z,1510160054.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:15.050Z,1510160055.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:15.099Z,1510160055.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T16:54:15.100Z,1510160055.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:15.461Z,1510160055.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:15.492Z,1510160055.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T16:54:15.493Z,1510160055.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:15.861Z,1510160055.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:15.893Z,1510160055.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T16:54:15.894Z,1510160055.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:16.258Z,1510160056.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:16.290Z,1510160056.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T16:54:16.290Z,1510160056.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:16.646Z,1510160056.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:16.661Z,1510160056.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T16:54:16.662Z,1510160056.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:17.050Z,1510160057.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:17.065Z,1510160057.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T16:54:17.066Z,1510160057.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:17.447Z,1510160057.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:17.467Z,1510160057.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T16:54:17.468Z,1510160057.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:17.846Z,1510160057.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:17.867Z,1510160057.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T16:54:17.868Z,1510160057.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:18.261Z,1510160058.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:18.299Z,1510160058.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T16:54:18.300Z,1510160058.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:18.662Z,1510160058.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:18.696Z,1510160058.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:19.061Z,1510160059.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:19.099Z,1510160059.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:19.450Z,1510160059.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:19.466Z,1510160059.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:19.846Z,1510160059.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:19.862Z,1510160059.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:20.249Z,1510160060.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:20.265Z,1510160060.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:20.650Z,1510160060.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:20.666Z,1510160060.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:21.046Z,1510160061.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:21.062Z,1510160061.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:21.461Z,1510160061.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:21.498Z,1510160061.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:21.861Z,1510160061.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:21.899Z,1510160061.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:22.258Z,1510160062.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:22.274Z,1510160062.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:22.649Z,1510160062.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:22.665Z,1510160062.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:23.050Z,1510160063.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:23.066Z,1510160063.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:23.447Z,1510160063.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:23.503Z,1510160063.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:23.849Z,1510160063.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:23.865Z,1510160063.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:24.262Z,1510160064.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:24.299Z,1510160064.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:24.658Z,1510160064.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:24.674Z,1510160064.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:25.061Z,1510160065.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:25.095Z,1510160065.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:25.450Z,1510160065.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:25.467Z,1510160065.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:25.850Z,1510160065.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:25.866Z,1510160065.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:26.250Z,1510160066.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:26.265Z,1510160066.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:26.651Z,1510160066.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:26.671Z,1510160066.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:27.046Z,1510160067.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:27.063Z,1510160067.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:27.461Z,1510160067.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:27.499Z,1510160067.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:27.861Z,1510160067.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:27.897Z,1510160067.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:28.258Z,1510160068.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:28.274Z,1510160068.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:28.650Z,1510160068.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:28.665Z,1510160068.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:29.050Z,1510160069.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:29.067Z,1510160069.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:29.447Z,1510160069.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:29.467Z,1510160069.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:29.850Z,1510160069.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:29.865Z,1510160069.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:30.262Z,1510160070.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:30.294Z,1510160070.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:30.662Z,1510160070.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:30.678Z,1510160070.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:31.061Z,1510160071.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:31.077Z,1510160071.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:31.451Z,1510160071.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:31.472Z,1510160071.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:31.849Z,1510160071.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:31.866Z,1510160071.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:32.250Z,1510160072.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:32.266Z,1510160072.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:32.652Z,1510160072.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:32.668Z,1510160072.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:33.051Z,1510160073.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:33.067Z,1510160073.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:33.461Z,1510160073.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:33.478Z,1510160073.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:33.865Z,1510160073.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:33.916Z,1510160073.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:34.263Z,1510160074.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:34.280Z,1510160074.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:34.651Z,1510160074.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:34.679Z,1510160074.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:35.055Z,1510160075.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:35.119Z,1510160075.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:35.449Z,1510160075.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:35.470Z,1510160075.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:35.855Z,1510160075.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:35.871Z,1510160075.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:36.264Z,1510160076.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:36.319Z,1510160076.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:36.663Z,1510160076.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:36.683Z,1510160076.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:37.064Z,1510160077.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:37.110Z,1510160077.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:40.132Z,1510160080.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:40.161Z,1510160080.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:40.275Z,1510160080.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:40.317Z,1510160080.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:40.690Z,1510160080.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:40.717Z,1510160080.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:41.102Z,1510160081.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:41.118Z,1510160081.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:41.490Z,1510160081.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:41.524Z,1510160081.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:41.872Z,1510160081.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:41.887Z,1510160081.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:42.276Z,1510160082.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:42.309Z,1510160082.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:42.677Z,1510160082.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:42.693Z,1510160082.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:43.076Z,1510160083.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:43.092Z,1510160083.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:43.494Z,1510160083.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:43.520Z,1510160083.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:43.890Z,1510160083.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:43.914Z,1510160083.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:44.290Z,1510160084.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:44.314Z,1510160084.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:44.672Z,1510160084.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:44.705Z,1510160084.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:45.079Z,1510160085.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:45.107Z,1510160085.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:45.482Z,1510160085.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:45.532Z,1510160085.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:45.881Z,1510160085.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:45.897Z,1510160085.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:46.287Z,1510160086.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:46.303Z,1510160086.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:46.686Z,1510160086.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:46.707Z,1510160086.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:47.090Z,1510160087.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:47.106Z,1510160087.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:47.475Z,1510160087.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:47.497Z,1510160087.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:47.874Z,1510160087.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:47.897Z,1510160087.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:48.280Z,1510160088.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:48.297Z,1510160088.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:48.683Z,1510160088.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:48.700Z,1510160088.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:49.080Z,1510160089.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:49.099Z,1510160089.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:49.485Z,1510160089.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:49.507Z,1510160089.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:49.889Z,1510160089.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:49.911Z,1510160089.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:50.286Z,1510160090.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:50.308Z,1510160090.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:50.676Z,1510160090.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:50.708Z,1510160090.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:51.081Z,1510160091.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:51.097Z,1510160091.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:51.482Z,1510160091.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:51.499Z,1510160091.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:51.882Z,1510160091.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:51.898Z,1510160091.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:52.290Z,1510160092.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:52.311Z,1510160092.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:52.686Z,1510160092.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:52.702Z,1510160092.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:53.089Z,1510160093.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:53.105Z,1510160093.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:53.481Z,1510160093.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:53.498Z,1510160093.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:53.881Z,1510160093.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:53.897Z,1510160093.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:54.278Z,1510160094.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:54.294Z,1510160094.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:54.681Z,1510160094.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:54.698Z,1510160094.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:55.079Z,1510160095.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:55.099Z,1510160095.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:55.486Z,1510160095.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:55.502Z,1510160095.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:55.886Z,1510160095.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:55.908Z,1510160095.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:56.286Z,1510160096.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:56.360Z,1510160096.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:56.677Z,1510160096.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:56.693Z,1510160096.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:57.079Z,1510160097.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:57.139Z,1510160097.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:57.482Z,1510160097.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:57.498Z,1510160097.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:57.877Z,1510160097.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:57.916Z,1510160097.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:58.290Z,1510160098.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:58.311Z,1510160098.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:58.690Z,1510160098.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:58.711Z,1510160098.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:59.091Z,1510160099.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:59.107Z,1510160099.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:59.475Z,1510160099.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:59.496Z,1510160099.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:54:59.879Z,1510160099.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:54:59.906Z,1510160099.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:00.282Z,1510160100.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:00.297Z,1510160100.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:00.681Z,1510160100.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:00.701Z,1510160100.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:01.079Z,1510160101.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:01.099Z,1510160101.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:01.491Z,1510160101.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:01.507Z,1510160101.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:01.890Z,1510160101.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:01.911Z,1510160101.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:02.290Z,1510160102.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:02.311Z,1510160102.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:02.678Z,1510160102.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:02.693Z,1510160102.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:03.081Z,1510160103.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:03.104Z,1510160103.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:03.482Z,1510160103.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:03.498Z,1510160103.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:03.877Z,1510160103.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:03.893Z,1510160103.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:04.290Z,1510160104.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:04.311Z,1510160104.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:04.690Z,1510160104.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:04.711Z,1510160104.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:05.091Z,1510160105.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:05.107Z,1510160105.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:05.479Z,1510160105.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:05.500Z,1510160105.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:05.879Z,1510160105.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:05.906Z,1510160105.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:06.278Z,1510160106.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:06.335Z,1510160106.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:06.682Z,1510160106.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:06.699Z,1510160106.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:07.079Z,1510160107.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:07.100Z,1510160107.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:07.491Z,1510160107.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:07.507Z,1510160107.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:07.890Z,1510160107.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:07.906Z,1510160107.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:08.290Z,1510160108.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:08.306Z,1510160108.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:08.678Z,1510160108.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:08.693Z,1510160108.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:09.082Z,1510160109.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:09.098Z,1510160109.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:09.482Z,1510160109.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:09.498Z,1510160109.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:09.877Z,1510160109.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:09.893Z,1510160109.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:10.290Z,1510160110.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:10.311Z,1510160110.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:10.690Z,1510160110.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:10.711Z,1510160110.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:11.091Z,1510160111.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:11.107Z,1510160111.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:11.479Z,1510160111.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:11.501Z,1510160111.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:11.879Z,1510160111.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:11.900Z,1510160111.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:12.278Z,1510160112.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:12.294Z,1510160112.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:12.682Z,1510160112.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:12.699Z,1510160112.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:13.081Z,1510160113.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:13.098Z,1510160113.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:13.488Z,1510160113.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:13.525Z,1510160113.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:13.891Z,1510160113.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:13.911Z,1510160113.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:14.291Z,1510160114.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:14.308Z,1510160114.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:14.682Z,1510160114.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:14.699Z,1510160114.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:15.075Z,1510160115.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:15.098Z,1510160115.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:15.483Z,1510160115.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:15.504Z,1510160115.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:15.878Z,1510160115.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:15.899Z,1510160115.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:16.291Z,1510160116.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:16.312Z,1510160116.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:16.691Z,1510160116.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:16.712Z,1510160116.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:17.091Z,1510160117.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:17.171Z,1510160117.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:17.479Z,1510160117.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:17.509Z,1510160117.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:17.879Z,1510160117.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:17.939Z,1510160117.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:18.284Z,1510160118.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:18.300Z,1510160118.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:18.683Z,1510160118.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:18.739Z,1510160118.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:19.079Z,1510160119.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:19.110Z,1510160119.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:19.491Z,1510160119.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:19.508Z,1510160119.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:19.891Z,1510160119.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:19.911Z,1510160119.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:20.291Z,1510160120.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:20.308Z,1510160120.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:20.680Z,1510160120.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:20.696Z,1510160120.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:21.080Z,1510160121.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:21.096Z,1510160121.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:21.479Z,1510160121.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:21.501Z,1510160121.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:21.892Z,1510160121.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:21.909Z,1510160121.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:22.291Z,1510160122.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:22.311Z,1510160122.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:22.692Z,1510160122.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:22.715Z,1510160122.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:23.078Z,1510160123.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:23.099Z,1510160123.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:23.478Z,1510160123.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:23.500Z,1510160123.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:23.882Z,1510160123.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:23.899Z,1510160123.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:24.279Z,1510160124.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:24.300Z,1510160124.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:24.690Z,1510160124.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:24.707Z,1510160124.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:25.090Z,1510160125.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:25.111Z,1510160125.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:25.492Z,1510160125.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:25.509Z,1510160125.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:25.878Z,1510160125.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:25.895Z,1510160125.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:26.280Z,1510160126.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:26.298Z,1510160126.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:26.678Z,1510160126.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:26.694Z,1510160126.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:27.078Z,1510160127.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:27.139Z,1510160127.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:27.481Z,1510160127.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:27.498Z,1510160127.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:27.891Z,1510160127.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:27.915Z,1510160127.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:28.290Z,1510160128.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:28.308Z,1510160128.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:28.690Z,1510160128.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:28.707Z,1510160128.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:29.078Z,1510160129.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:29.094Z,1510160129.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:29.477Z,1510160129.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:29.494Z,1510160129.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:29.882Z,1510160129.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:29.898Z,1510160129.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:30.278Z,1510160130.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:30.299Z,1510160130.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:30.691Z,1510160130.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:30.712Z,1510160130.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:31.090Z,1510160131.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:31.111Z,1510160131.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:31.491Z,1510160131.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:31.511Z,1510160131.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:31.877Z,1510160131.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:31.894Z,1510160131.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:32.274Z,1510160132.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:32.323Z,1510160132.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:32.671Z,1510160132.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:32.705Z,1510160132.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:33.072Z,1510160133.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:33.097Z,1510160133.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:33.475Z,1510160133.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:33.511Z,1510160133.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:33.896Z,1510160133.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:33.919Z,1510160133.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:36.998Z,1510160136.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:37.019Z,1510160137.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:37.166Z,1510160137.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:37.201Z,1510160137.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:37.550Z,1510160137.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:37.567Z,1510160137.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:37.949Z,1510160137.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:37.966Z,1510160137.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:38.348Z,1510160138.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:38.411Z,1510160138.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:38.759Z,1510160138.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:38.775Z,1510160138.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:39.158Z,1510160139.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:39.211Z,1510160139.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:39.558Z,1510160139.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:39.575Z,1510160139.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:39.950Z,1510160139.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:40.001Z,1510160140.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:40.349Z,1510160140.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:40.371Z,1510160140.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:40.747Z,1510160140.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:40.767Z,1510160140.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:41.146Z,1510160141.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:41.162Z,1510160141.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:41.543Z,1510160141.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:41.564Z,1510160141.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:41.958Z,1510160141.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:41.980Z,1510160141.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:42.358Z,1510160142.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:42.374Z,1510160142.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:42.755Z,1510160142.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:42.772Z,1510160142.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:43.148Z,1510160143.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:43.165Z,1510160143.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:43.539Z,1510160143.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:43.572Z,1510160143.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:43.940Z,1510160143.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:43.968Z,1510160143.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:44.339Z,1510160144.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:44.370Z,1510160144.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:44.760Z,1510160144.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:44.776Z,1510160144.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:45.159Z,1510160145.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:45.175Z,1510160145.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:45.559Z,1510160145.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:45.579Z,1510160145.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:45.939Z,1510160145.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:45.972Z,1510160145.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:46.349Z,1510160146.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:46.371Z,1510160146.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:46.749Z,1510160146.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:46.765Z,1510160146.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:47.151Z,1510160147.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:47.167Z,1510160147.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:47.539Z,1510160147.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:47.572Z,1510160147.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:47.959Z,1510160147.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:47.975Z,1510160147.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:48.360Z,1510160148.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:48.412Z,1510160148.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:48.759Z,1510160148.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:48.776Z,1510160148.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:49.149Z,1510160149.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:49.165Z,1510160149.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:49.550Z,1510160149.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:49.565Z,1510160149.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:49.940Z,1510160149.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:49.973Z,1510160149.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:50.339Z,1510160150.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:50.364Z,1510160150.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:50.760Z,1510160150.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:50.776Z,1510160150.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:51.160Z,1510160151.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:51.176Z,1510160151.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:51.559Z,1510160151.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:51.583Z,1510160151.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:51.939Z,1510160151.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:51.964Z,1510160151.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:52.349Z,1510160152.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:52.371Z,1510160152.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:52.749Z,1510160152.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:52.765Z,1510160152.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:53.140Z,1510160153.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:53.169Z,1510160153.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:53.539Z,1510160153.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:53.564Z,1510160153.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:53.959Z,1510160153.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:53.979Z,1510160153.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:54.360Z,1510160154.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:54.383Z,1510160154.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:54.759Z,1510160154.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:54.779Z,1510160154.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:55.149Z,1510160155.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:55.165Z,1510160155.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:55.539Z,1510160155.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:55.565Z,1510160155.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:55.950Z,1510160155.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:55.972Z,1510160155.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:56.347Z,1510160156.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:56.368Z,1510160156.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:56.763Z,1510160156.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:56.783Z,1510160156.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:57.163Z,1510160157.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:57.179Z,1510160157.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:57.562Z,1510160157.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:57.584Z,1510160157.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:57.939Z,1510160157.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:57.968Z,1510160157.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:58.343Z,1510160158.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:58.369Z,1510160158.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:58.743Z,1510160158.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:58.780Z,1510160158.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:59.140Z,1510160159.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:59.191Z,1510160159.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:59.543Z,1510160159.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:59.569Z,1510160159.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:55:59.960Z,1510160159.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:55:59.977Z,1510160159.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:00.360Z,1510160160.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:00.432Z,1510160160.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:00.754Z,1510160160.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:00.779Z,1510160160.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:01.147Z,1510160161.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:01.180Z,1510160161.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:01.547Z,1510160161.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:01.600Z,1510160161.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:01.949Z,1510160161.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:01.965Z,1510160161.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:02.347Z,1510160162.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:02.403Z,1510160162.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:02.485Z,1510160162.485 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:56:02.485Z,1510160162.485 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T16:56:02.754Z,1510160162.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:02.781Z,1510160162.781 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:56:02.781Z,1510160162.781 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:56:02.781Z,1510160162.781 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:56:02.781Z,1510160162.781 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T16:56:02.781Z,1510160162.781 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:56:02.801Z,1510160162.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:02.897Z,1510160162.897 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:56:03.158Z,1510160163.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:03.185Z,1510160163.185 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:56:03.240Z,1510160163.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:03.347Z,1510160163.347 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:56:03.559Z,1510160163.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:03.591Z,1510160163.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:03.947Z,1510160163.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:03.968Z,1510160163.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:04.347Z,1510160164.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:04.365Z,1510160164.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:04.746Z,1510160164.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:04.763Z,1510160164.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:04.857Z,1510160164.857 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:56:04.857Z,1510160164.857 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T16:56:04.961Z,1510160164.961 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:56:04.961Z,1510160164.961 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:56:04.961Z,1510160164.961 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:56:04.961Z,1510160164.961 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T16:56:04.961Z,1510160164.961 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:56:05.147Z,1510160165.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:05.168Z,1510160165.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:05.265Z,1510160165.265 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:56:05.365Z,1510160165.365 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:56:05.449Z,1510160165.449 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:56:05.549Z,1510160165.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:05.582Z,1510160165.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:05.962Z,1510160165.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:05.995Z,1510160165.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:06.358Z,1510160166.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:06.380Z,1510160166.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:06.756Z,1510160166.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:06.773Z,1510160166.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:06.869Z,1510160166.869 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:56:06.869Z,1510160166.869 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T16:56:07.065Z,1510160167.065 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:56:07.065Z,1510160167.065 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:56:07.065Z,1510160167.065 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:56:07.065Z,1510160167.065 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T16:56:07.065Z,1510160167.065 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:56:07.146Z,1510160167.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:07.162Z,1510160167.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:07.241Z,1510160167.241 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:56:07.469Z,1510160167.469 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:56:07.554Z,1510160167.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:07.613Z,1510160167.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:07.665Z,1510160167.665 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:56:07.949Z,1510160167.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:07.966Z,1510160167.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:08.350Z,1510160168.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:08.367Z,1510160168.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:08.760Z,1510160168.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:08.784Z,1510160168.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:08.885Z,1510160168.885 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:56:08.885Z,1510160168.885 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T16:56:09.158Z,1510160169.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:09.186Z,1510160169.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:09.281Z,1510160169.281 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:56:09.281Z,1510160169.281 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:56:09.281Z,1510160169.281 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:56:09.281Z,1510160169.281 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T16:56:09.282Z,1510160169.282 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:56:09.555Z,1510160169.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:09.580Z,1510160169.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:09.661Z,1510160169.661 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:56:09.685Z,1510160169.685 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:56:09.781Z,1510160169.781 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:56:09.957Z,1510160169.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:09.976Z,1510160169.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:10.350Z,1510160170.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:10.373Z,1510160170.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:10.750Z,1510160170.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:10.810Z,1510160170.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:11.152Z,1510160171.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:11.169Z,1510160171.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:11.248Z,1510160171.248 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T16:56:11.248Z,1510160171.248 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T16:56:11.397Z,1510160171.397 [Rowe_600LCM](INFO): Initializing
2017-11-08T16:56:11.397Z,1510160171.397 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T16:56:11.397Z,1510160171.397 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T16:56:11.397Z,1510160171.397 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T16:56:11.397Z,1510160171.397 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T16:56:11.539Z,1510160171.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:11.572Z,1510160171.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:11.665Z,1510160171.665 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:56:11.665Z,1510160171.665 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T16:56:11.802Z,1510160171.802 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T16:56:11.886Z,1510160171.886 [Rowe_600LCM](INFO): Powering down
2017-11-08T16:56:11.970Z,1510160171.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:11.990Z,1510160171.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:12.365Z,1510160172.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:12.388Z,1510160172.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:12.761Z,1510160172.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:12.778Z,1510160172.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:13.143Z,1510160173.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:13.175Z,1510160173.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:13.548Z,1510160173.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:13.575Z,1510160173.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:13.940Z,1510160173.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:13.973Z,1510160173.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:14.339Z,1510160174.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:14.355Z,1510160174.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:14.765Z,1510160174.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:14.782Z,1510160174.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:15.154Z,1510160175.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:15.186Z,1510160175.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:15.553Z,1510160175.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:15.583Z,1510160175.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:15.944Z,1510160175.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:15.976Z,1510160175.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:16.340Z,1510160176.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:16.356Z,1510160176.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:16.743Z,1510160176.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:16.759Z,1510160176.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:17.145Z,1510160177.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:17.177Z,1510160177.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:17.543Z,1510160177.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:17.584Z,1510160177.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:17.958Z,1510160177.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:17.989Z,1510160177.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:18.362Z,1510160178.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:18.394Z,1510160178.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:18.758Z,1510160178.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:18.791Z,1510160178.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:19.147Z,1510160179.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:19.163Z,1510160179.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:19.548Z,1510160179.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:19.564Z,1510160179.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:19.948Z,1510160179.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:19.965Z,1510160179.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:20.346Z,1510160180.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:20.362Z,1510160180.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:20.758Z,1510160180.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:20.790Z,1510160180.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:21.158Z,1510160181.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:21.188Z,1510160181.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:21.556Z,1510160181.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:21.608Z,1510160181.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:21.946Z,1510160181.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:21.963Z,1510160181.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:22.346Z,1510160182.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:22.363Z,1510160182.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:22.745Z,1510160182.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:22.809Z,1510160182.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:23.147Z,1510160183.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:23.168Z,1510160183.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:23.546Z,1510160183.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:23.563Z,1510160183.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:23.957Z,1510160183.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:24.004Z,1510160184.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:24.357Z,1510160184.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:24.390Z,1510160184.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:24.754Z,1510160184.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:24.808Z,1510160184.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:25.146Z,1510160185.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:25.161Z,1510160185.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:25.546Z,1510160185.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:25.563Z,1510160185.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:25.945Z,1510160185.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:25.961Z,1510160185.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:26.347Z,1510160186.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:26.414Z,1510160186.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:26.768Z,1510160186.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:26.800Z,1510160186.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:27.160Z,1510160187.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:27.204Z,1510160187.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:27.563Z,1510160187.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:27.614Z,1510160187.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:27.953Z,1510160187.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:27.998Z,1510160187.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:28.351Z,1510160188.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:28.376Z,1510160188.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:28.750Z,1510160188.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:28.767Z,1510160188.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:29.151Z,1510160189.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:29.204Z,1510160189.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:29.551Z,1510160189.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:29.576Z,1510160189.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:29.959Z,1510160189.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:29.975Z,1510160189.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:30.364Z,1510160190.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:30.380Z,1510160190.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:30.755Z,1510160190.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:30.771Z,1510160190.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:31.139Z,1510160191.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:31.164Z,1510160191.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:31.543Z,1510160191.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:31.569Z,1510160191.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:31.944Z,1510160191.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:31.969Z,1510160191.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:32.339Z,1510160192.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:32.363Z,1510160192.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:32.764Z,1510160192.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:32.780Z,1510160192.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:33.159Z,1510160193.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:33.222Z,1510160193.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:33.564Z,1510160193.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:33.579Z,1510160193.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:33.944Z,1510160193.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:33.976Z,1510160193.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:37.025Z,1510160197.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:37.043Z,1510160197.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:37.175Z,1510160197.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:37.219Z,1510160197.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:37.586Z,1510160197.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:37.617Z,1510160197.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:37.981Z,1510160197.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:38.018Z,1510160198.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:38.373Z,1510160198.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:38.395Z,1510160198.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:38.771Z,1510160198.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:38.791Z,1510160198.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:39.169Z,1510160199.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:39.185Z,1510160199.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:39.570Z,1510160199.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:39.586Z,1510160199.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:39.972Z,1510160199.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:39.988Z,1510160199.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:40.370Z,1510160200.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:40.387Z,1510160200.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:40.773Z,1510160200.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:40.795Z,1510160200.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:41.186Z,1510160201.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:41.222Z,1510160201.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:41.578Z,1510160201.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:41.594Z,1510160201.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:41.972Z,1510160201.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:41.987Z,1510160201.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:42.373Z,1510160202.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:42.396Z,1510160202.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:42.769Z,1510160202.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:42.789Z,1510160202.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:43.173Z,1510160203.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:43.189Z,1510160203.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:43.582Z,1510160203.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:43.598Z,1510160203.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:43.982Z,1510160203.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:44.055Z,1510160204.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:44.383Z,1510160204.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:44.399Z,1510160204.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:44.775Z,1510160204.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:44.792Z,1510160204.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:45.167Z,1510160205.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:45.227Z,1510160205.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:45.563Z,1510160205.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:45.595Z,1510160205.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:45.975Z,1510160205.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:45.992Z,1510160205.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:46.373Z,1510160206.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:46.435Z,1510160206.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:46.784Z,1510160206.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:46.801Z,1510160206.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:47.187Z,1510160207.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:47.247Z,1510160207.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:47.587Z,1510160207.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:47.604Z,1510160207.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:47.975Z,1510160207.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:47.990Z,1510160207.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:48.375Z,1510160208.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:48.391Z,1510160208.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:48.773Z,1510160208.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:48.789Z,1510160208.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:49.175Z,1510160209.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:49.191Z,1510160209.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:49.586Z,1510160209.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:49.602Z,1510160209.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:49.985Z,1510160209.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:50.001Z,1510160210.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:50.384Z,1510160210.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:50.400Z,1510160210.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:50.763Z,1510160210.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:50.798Z,1510160210.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:51.164Z,1510160211.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:51.198Z,1510160211.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:51.574Z,1510160211.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:51.590Z,1510160211.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:51.973Z,1510160211.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:51.990Z,1510160211.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:52.363Z,1510160212.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:52.407Z,1510160212.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:52.774Z,1510160212.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:52.814Z,1510160212.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:53.185Z,1510160213.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:53.202Z,1510160213.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:53.585Z,1510160213.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:53.601Z,1510160213.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:53.967Z,1510160213.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:54.007Z,1510160214.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:54.363Z,1510160214.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:54.379Z,1510160214.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:54.764Z,1510160214.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:54.804Z,1510160214.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:55.163Z,1510160215.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:55.179Z,1510160215.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:55.577Z,1510160215.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:55.622Z,1510160215.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:55.977Z,1510160215.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:56.008Z,1510160216.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:56.381Z,1510160216.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:56.407Z,1510160216.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:56.766Z,1510160216.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:56.782Z,1510160216.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:57.166Z,1510160217.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:57.182Z,1510160217.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:57.567Z,1510160217.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:57.583Z,1510160217.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:57.967Z,1510160217.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:57.982Z,1510160217.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:58.370Z,1510160218.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:58.386Z,1510160218.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:58.781Z,1510160218.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:58.816Z,1510160218.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:59.181Z,1510160219.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:59.211Z,1510160219.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:59.582Z,1510160219.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:56:59.614Z,1510160219.614 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:59.614Z,1510160219.614 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71
2017-11-08T16:56:59.614Z,1510160219.614 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T16:56:59.616Z,1510160219.616 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:59.616Z,1510160219.616 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71
2017-11-08T16:56:59.621Z,1510160219.621 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T16:56:59.622Z,1510160219.622 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:56:59.622Z,1510160219.622 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 71
2017-11-08T16:56:59.622Z,1510160219.622 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T16:56:59.717Z,1510160219.717 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T16:56:59.717Z,1510160219.717 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T16:56:59.717Z,1510160219.717 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T16:56:59.967Z,1510160219.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:00.065Z,1510160220.065 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T16:57:00.065Z,1510160220.065 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71
2017-11-08T16:57:00.065Z,1510160220.065 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T16:57:00.065Z,1510160220.065 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71
2017-11-08T16:57:00.066Z,1510160220.066 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T16:57:00.066Z,1510160220.066 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 71
2017-11-08T16:57:00.368Z,1510160220.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:00.390Z,1510160220.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T16:57:00.391Z,1510160220.391 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:57:00.391Z,1510160220.391 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:57:00.391Z,1510160220.391 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T16:57:00.392Z,1510160220.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:57:00.392Z,1510160220.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:57:00.392Z,1510160220.392 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T16:57:00.393Z,1510160220.393 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T16:57:00.393Z,1510160220.393 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T16:57:00.769Z,1510160220.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:00.789Z,1510160220.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T16:57:00.790Z,1510160220.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:01.173Z,1510160221.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:01.188Z,1510160221.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T16:57:01.189Z,1510160221.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:01.579Z,1510160221.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:01.594Z,1510160221.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T16:57:01.595Z,1510160221.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:01.978Z,1510160221.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:01.999Z,1510160221.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T16:57:02.000Z,1510160222.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:02.378Z,1510160222.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:02.399Z,1510160222.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T16:57:02.400Z,1510160222.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:02.774Z,1510160222.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:02.790Z,1510160222.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T16:57:02.791Z,1510160222.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:03.167Z,1510160223.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:03.187Z,1510160223.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T16:57:03.188Z,1510160223.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:03.569Z,1510160223.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:03.591Z,1510160223.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T16:57:03.592Z,1510160223.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:03.969Z,1510160223.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:03.997Z,1510160223.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T16:57:03.998Z,1510160223.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:04.374Z,1510160224.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:04.390Z,1510160224.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T16:57:04.391Z,1510160224.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:04.778Z,1510160224.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:04.799Z,1510160224.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T16:57:04.800Z,1510160224.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:05.179Z,1510160225.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:05.199Z,1510160225.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T16:57:05.200Z,1510160225.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:05.583Z,1510160225.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:05.603Z,1510160225.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T16:57:05.604Z,1510160225.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:05.973Z,1510160225.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:05.988Z,1510160225.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T16:57:05.989Z,1510160225.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:06.370Z,1510160226.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:06.407Z,1510160226.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T16:57:06.408Z,1510160226.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:06.774Z,1510160226.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:06.790Z,1510160226.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T16:57:06.791Z,1510160226.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:07.163Z,1510160227.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:07.194Z,1510160227.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T16:57:07.195Z,1510160227.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:07.584Z,1510160227.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:07.599Z,1510160227.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T16:57:07.601Z,1510160227.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:07.986Z,1510160227.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:08.058Z,1510160228.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T16:57:08.059Z,1510160228.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:08.383Z,1510160228.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:08.399Z,1510160228.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T16:57:08.400Z,1510160228.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:08.763Z,1510160228.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:08.804Z,1510160228.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T16:57:08.805Z,1510160228.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:09.167Z,1510160229.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:09.191Z,1510160229.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T16:57:09.192Z,1510160229.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:09.567Z,1510160229.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:09.616Z,1510160229.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T16:57:09.617Z,1510160229.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:09.964Z,1510160229.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:09.997Z,1510160229.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T16:57:09.998Z,1510160229.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:10.367Z,1510160230.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:10.391Z,1510160230.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T16:57:10.392Z,1510160230.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:10.783Z,1510160230.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:10.799Z,1510160230.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T16:57:10.800Z,1510160230.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:11.184Z,1510160231.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:11.207Z,1510160231.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T16:57:11.208Z,1510160231.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:11.588Z,1510160231.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:11.603Z,1510160231.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T16:57:11.604Z,1510160231.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:11.967Z,1510160231.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:11.995Z,1510160231.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T16:57:11.996Z,1510160231.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:12.367Z,1510160232.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:12.391Z,1510160232.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T16:57:12.392Z,1510160232.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:12.768Z,1510160232.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:12.793Z,1510160232.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T16:57:12.793Z,1510160232.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:13.167Z,1510160233.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:13.195Z,1510160233.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T16:57:13.196Z,1510160233.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:13.588Z,1510160233.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:13.603Z,1510160233.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T16:57:13.604Z,1510160233.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:13.987Z,1510160233.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:14.003Z,1510160234.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T16:57:14.004Z,1510160234.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:14.383Z,1510160234.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:14.399Z,1510160234.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T16:57:14.400Z,1510160234.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:14.763Z,1510160234.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:14.799Z,1510160234.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T16:57:14.800Z,1510160234.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:15.167Z,1510160235.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:15.198Z,1510160235.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T16:57:15.199Z,1510160235.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:15.567Z,1510160235.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:15.597Z,1510160235.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T16:57:15.598Z,1510160235.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:15.968Z,1510160235.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:15.997Z,1510160235.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T16:57:15.998Z,1510160235.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:16.367Z,1510160236.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:16.397Z,1510160236.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T16:57:16.398Z,1510160236.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:16.784Z,1510160236.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:16.819Z,1510160236.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T16:57:16.820Z,1510160236.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:17.184Z,1510160237.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:17.200Z,1510160237.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T16:57:17.201Z,1510160237.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:17.582Z,1510160237.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:17.603Z,1510160237.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T16:57:17.604Z,1510160237.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:17.967Z,1510160237.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:18.019Z,1510160238.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T16:57:18.021Z,1510160238.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:18.363Z,1510160238.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:18.399Z,1510160238.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T16:57:18.400Z,1510160238.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:18.768Z,1510160238.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:18.797Z,1510160238.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T16:57:18.798Z,1510160238.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:19.167Z,1510160239.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:19.203Z,1510160239.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T16:57:19.203Z,1510160239.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:19.588Z,1510160239.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:19.604Z,1510160239.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-08T16:57:19.605Z,1510160239.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:19.987Z,1510160239.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:20.004Z,1510160240.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:20.378Z,1510160240.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:20.410Z,1510160240.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:20.763Z,1510160240.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:20.779Z,1510160240.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:21.167Z,1510160241.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:21.208Z,1510160241.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:21.567Z,1510160241.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:21.587Z,1510160241.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:21.972Z,1510160241.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:21.988Z,1510160241.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:22.368Z,1510160242.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:22.384Z,1510160242.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:22.786Z,1510160242.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:22.813Z,1510160242.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:23.185Z,1510160243.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:23.239Z,1510160243.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:23.582Z,1510160243.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:23.613Z,1510160243.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:23.970Z,1510160243.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:23.987Z,1510160243.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:24.371Z,1510160244.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:24.387Z,1510160244.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:24.772Z,1510160244.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:24.789Z,1510160244.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:25.171Z,1510160245.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:25.192Z,1510160245.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:25.586Z,1510160245.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:25.617Z,1510160245.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:25.986Z,1510160245.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:26.021Z,1510160246.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:26.382Z,1510160246.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:26.415Z,1510160246.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:26.771Z,1510160246.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:26.787Z,1510160246.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:27.168Z,1510160247.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:27.188Z,1510160247.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:27.572Z,1510160247.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:27.588Z,1510160247.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:27.972Z,1510160247.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:27.987Z,1510160247.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:28.371Z,1510160248.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:28.387Z,1510160248.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:28.778Z,1510160248.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:28.795Z,1510160248.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:29.178Z,1510160249.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:29.194Z,1510160249.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:29.578Z,1510160249.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:29.644Z,1510160249.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:29.971Z,1510160249.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:30.001Z,1510160250.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:30.371Z,1510160250.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:30.431Z,1510160250.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:30.775Z,1510160250.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:30.793Z,1510160250.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:31.174Z,1510160251.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:31.231Z,1510160251.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:31.583Z,1510160251.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:31.600Z,1510160251.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:31.982Z,1510160251.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:31.999Z,1510160251.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:32.380Z,1510160252.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:32.397Z,1510160252.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:32.770Z,1510160252.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:32.788Z,1510160252.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:33.166Z,1510160253.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:33.189Z,1510160253.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:33.578Z,1510160253.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:33.595Z,1510160253.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:33.979Z,1510160253.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:33.995Z,1510160253.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:38.101Z,1510160258.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:38.126Z,1510160258.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:38.242Z,1510160258.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:38.287Z,1510160258.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:38.654Z,1510160258.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:38.685Z,1510160258.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:39.046Z,1510160259.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:39.062Z,1510160259.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:39.435Z,1510160259.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:39.495Z,1510160259.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:39.834Z,1510160259.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:39.855Z,1510160259.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:40.234Z,1510160260.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:40.250Z,1510160260.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:40.646Z,1510160260.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:40.662Z,1510160260.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:41.049Z,1510160261.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:41.087Z,1510160261.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:41.442Z,1510160261.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:41.458Z,1510160261.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:41.835Z,1510160261.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:41.855Z,1510160261.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:42.233Z,1510160262.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:42.249Z,1510160262.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:42.633Z,1510160262.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:42.649Z,1510160262.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:43.035Z,1510160263.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:43.052Z,1510160263.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:43.433Z,1510160263.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:43.455Z,1510160263.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:43.838Z,1510160263.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:43.854Z,1510160263.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:44.253Z,1510160264.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:44.284Z,1510160264.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:44.645Z,1510160264.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:44.661Z,1510160264.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:45.033Z,1510160265.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:45.049Z,1510160265.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:45.435Z,1510160265.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:45.455Z,1510160265.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:45.836Z,1510160265.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:45.851Z,1510160265.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:46.235Z,1510160266.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:46.255Z,1510160266.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:46.646Z,1510160266.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:46.662Z,1510160266.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:47.053Z,1510160267.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:47.085Z,1510160267.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:47.450Z,1510160267.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:47.482Z,1510160267.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:47.834Z,1510160267.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:47.862Z,1510160267.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:48.236Z,1510160268.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:48.266Z,1510160268.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:48.639Z,1510160268.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:48.749Z,1510160268.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:49.039Z,1510160269.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:49.055Z,1510160269.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:49.439Z,1510160269.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:49.455Z,1510160269.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:49.845Z,1510160269.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:49.861Z,1510160269.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:50.246Z,1510160270.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:50.263Z,1510160270.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:50.645Z,1510160270.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:50.667Z,1510160270.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:51.039Z,1510160271.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:51.056Z,1510160271.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:51.440Z,1510160271.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:51.523Z,1510160271.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:51.839Z,1510160271.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:51.855Z,1510160271.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:52.239Z,1510160272.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:52.299Z,1510160272.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:52.647Z,1510160272.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:52.664Z,1510160272.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:53.051Z,1510160273.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:53.094Z,1510160273.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:53.449Z,1510160273.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:53.465Z,1510160273.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:53.827Z,1510160273.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:53.859Z,1510160273.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:54.239Z,1510160274.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:54.254Z,1510160274.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:54.628Z,1510160274.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:54.660Z,1510160274.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:55.038Z,1510160275.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:55.055Z,1510160275.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:55.429Z,1510160275.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:55.463Z,1510160275.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:55.844Z,1510160275.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:55.861Z,1510160275.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:56.250Z,1510160276.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:56.267Z,1510160276.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:56.651Z,1510160276.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:56.667Z,1510160276.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:57.028Z,1510160277.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:57.062Z,1510160277.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:57.438Z,1510160277.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:57.454Z,1510160277.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:57.837Z,1510160277.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:57.869Z,1510160277.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:58.227Z,1510160278.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:58.253Z,1510160278.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:58.646Z,1510160278.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:58.663Z,1510160278.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:59.046Z,1510160279.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:59.063Z,1510160279.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:59.447Z,1510160279.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:59.465Z,1510160279.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:57:59.831Z,1510160279.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:57:59.862Z,1510160279.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:00.232Z,1510160280.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:00.263Z,1510160280.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:00.627Z,1510160280.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:00.662Z,1510160280.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:01.032Z,1510160281.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:01.062Z,1510160281.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:01.432Z,1510160281.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:01.473Z,1510160281.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:01.848Z,1510160281.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:01.864Z,1510160281.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:02.251Z,1510160282.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:02.267Z,1510160282.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:02.653Z,1510160282.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:02.669Z,1510160282.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:03.028Z,1510160283.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:03.060Z,1510160283.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:03.431Z,1510160283.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:03.467Z,1510160283.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:03.833Z,1510160283.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:03.866Z,1510160283.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:04.227Z,1510160284.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:04.264Z,1510160284.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:04.637Z,1510160284.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:04.662Z,1510160284.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:05.046Z,1510160285.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:05.072Z,1510160285.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:05.442Z,1510160285.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:05.474Z,1510160285.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:05.827Z,1510160285.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:05.843Z,1510160285.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:06.232Z,1510160286.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:06.248Z,1510160286.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:06.627Z,1510160286.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:06.648Z,1510160286.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:07.027Z,1510160287.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:07.042Z,1510160287.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:07.432Z,1510160287.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:07.448Z,1510160287.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:07.838Z,1510160287.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:07.870Z,1510160287.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:08.249Z,1510160288.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:08.277Z,1510160288.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:08.650Z,1510160288.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:08.676Z,1510160288.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:09.036Z,1510160289.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:09.052Z,1510160289.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:09.435Z,1510160289.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:09.451Z,1510160289.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:09.833Z,1510160289.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:09.849Z,1510160289.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:10.235Z,1510160290.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:10.252Z,1510160290.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:10.649Z,1510160290.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:10.676Z,1510160290.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:11.050Z,1510160291.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:11.083Z,1510160291.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:11.450Z,1510160291.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:11.475Z,1510160291.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:11.835Z,1510160291.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:11.851Z,1510160291.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:12.236Z,1510160292.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:12.252Z,1510160292.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:12.636Z,1510160292.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:12.652Z,1510160292.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:13.035Z,1510160293.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:13.055Z,1510160293.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:13.434Z,1510160293.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:13.501Z,1510160293.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:13.846Z,1510160293.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:13.901Z,1510160293.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:14.241Z,1510160294.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:14.269Z,1510160294.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:14.646Z,1510160294.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:14.691Z,1510160294.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:15.034Z,1510160295.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:15.050Z,1510160295.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:15.430Z,1510160295.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:15.476Z,1510160295.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:15.836Z,1510160295.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:15.852Z,1510160295.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:16.232Z,1510160296.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:16.248Z,1510160296.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:16.645Z,1510160296.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:16.676Z,1510160296.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:17.049Z,1510160297.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:17.075Z,1510160297.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:17.446Z,1510160297.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:17.476Z,1510160297.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:17.834Z,1510160297.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:17.850Z,1510160297.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:18.235Z,1510160298.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:18.255Z,1510160298.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:18.631Z,1510160298.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:18.654Z,1510160298.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:19.035Z,1510160299.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:19.050Z,1510160299.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:19.435Z,1510160299.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:19.455Z,1510160299.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:19.842Z,1510160299.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:19.874Z,1510160299.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:20.245Z,1510160300.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:20.282Z,1510160300.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:20.646Z,1510160300.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:20.677Z,1510160300.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:21.033Z,1510160301.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:21.049Z,1510160301.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:21.432Z,1510160301.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:21.455Z,1510160301.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:21.836Z,1510160301.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:21.859Z,1510160301.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:22.236Z,1510160302.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:22.252Z,1510160302.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:22.645Z,1510160302.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:22.681Z,1510160302.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:23.049Z,1510160303.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:23.082Z,1510160303.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:23.442Z,1510160303.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:23.458Z,1510160303.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:23.834Z,1510160303.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:23.880Z,1510160303.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:24.235Z,1510160304.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:24.251Z,1510160304.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:24.635Z,1510160304.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:24.656Z,1510160304.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:25.039Z,1510160305.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:25.055Z,1510160305.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:25.436Z,1510160305.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:25.452Z,1510160305.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:25.846Z,1510160305.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:25.878Z,1510160305.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:26.245Z,1510160306.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:26.261Z,1510160306.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:26.646Z,1510160306.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:26.662Z,1510160306.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:27.035Z,1510160307.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:27.051Z,1510160307.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:27.436Z,1510160307.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:27.452Z,1510160307.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:27.836Z,1510160307.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:27.853Z,1510160307.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:28.237Z,1510160308.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:28.254Z,1510160308.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:28.641Z,1510160308.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:28.658Z,1510160308.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:29.045Z,1510160309.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:29.067Z,1510160309.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:29.442Z,1510160309.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:29.459Z,1510160309.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:29.838Z,1510160309.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:29.853Z,1510160309.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:30.237Z,1510160310.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:30.259Z,1510160310.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:30.631Z,1510160310.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:30.652Z,1510160310.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:31.040Z,1510160311.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:31.056Z,1510160311.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:31.436Z,1510160311.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:31.453Z,1510160311.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:31.842Z,1510160311.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:31.858Z,1510160311.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:32.245Z,1510160312.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:32.261Z,1510160312.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:32.642Z,1510160312.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:32.659Z,1510160312.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:33.034Z,1510160313.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:33.051Z,1510160313.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:33.436Z,1510160313.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:33.453Z,1510160313.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:33.456Z,1510160313.456 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T16:58:33.457Z,1510160313.457 [Default:CheckIn:C.Wait] Stopped
2017-11-08T16:58:33.457Z,1510160313.457 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T16:58:33.457Z,1510160313.457 [Default:CheckIn:D] Running Loop=1
2017-11-08T16:58:33.839Z,1510160313.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:33.856Z,1510160313.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:33.859Z,1510160313.859 [Default:CheckIn:D] Stopped
2017-11-08T16:58:33.859Z,1510160313.859 [Default:CheckIn:E] Running Loop=1
2017-11-08T16:58:34.239Z,1510160314.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:34.256Z,1510160314.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:34.259Z,1510160314.259 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 211.881315 min 
2017-11-08T16:58:34.259Z,1510160314.259 [Default:CheckIn:E] Stopped
2017-11-08T16:58:34.259Z,1510160314.259 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T16:58:34.260Z,1510160314.260 [Default:CheckIn] Stopped
2017-11-08T16:58:34.260Z,1510160314.260 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T16:58:34.260Z,1510160314.260 [Default:CheckIn](INFO): Running loop #9
2017-11-08T16:58:34.260Z,1510160314.260 [Default:CheckIn] Running Loop=9
2017-11-08T16:58:34.260Z,1510160314.260 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T16:58:34.260Z,1510160314.260 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T16:58:37.339Z,1510160317.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:37.436Z,1510160317.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:37.559Z,1510160317.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:37.596Z,1510160317.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:37.966Z,1510160317.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:37.000Z,1510160318.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:38.356Z,1510160318.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:38.400Z,1510160318.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:38.754Z,1510160318.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:38.771Z,1510160318.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:39.152Z,1510160319.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:39.207Z,1510160319.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:39.557Z,1510160319.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:39.574Z,1510160319.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:39.958Z,1510160319.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:39.974Z,1510160319.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:40.358Z,1510160320.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:40.375Z,1510160320.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:40.751Z,1510160320.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:40.767Z,1510160320.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:41.153Z,1510160321.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:41.170Z,1510160321.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:41.553Z,1510160321.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:41.569Z,1510160321.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:41.956Z,1510160321.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:41.972Z,1510160321.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:42.358Z,1510160322.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:42.374Z,1510160322.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:42.758Z,1510160322.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:42.774Z,1510160322.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:43.152Z,1510160323.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:43.168Z,1510160323.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:43.550Z,1510160323.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:43.566Z,1510160323.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:43.953Z,1510160323.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:43.973Z,1510160323.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:44.354Z,1510160324.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:44.369Z,1510160324.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:44.758Z,1510160324.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:44.775Z,1510160324.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:45.162Z,1510160325.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:45.178Z,1510160325.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:45.562Z,1510160325.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:45.578Z,1510160325.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:45.948Z,1510160325.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:45.978Z,1510160325.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:46.353Z,1510160326.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:46.370Z,1510160326.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:46.751Z,1510160326.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:46.766Z,1510160326.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:47.149Z,1510160327.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:47.172Z,1510160327.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:47.552Z,1510160327.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:47.607Z,1510160327.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:47.962Z,1510160327.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:47.978Z,1510160327.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:48.358Z,1510160328.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:48.379Z,1510160328.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:48.758Z,1510160328.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:48.775Z,1510160328.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:49.149Z,1510160329.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:49.165Z,1510160329.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:49.549Z,1510160329.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:49.566Z,1510160329.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:49.952Z,1510160329.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:49.969Z,1510160329.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:50.350Z,1510160330.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:50.371Z,1510160330.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:50.758Z,1510160330.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:50.774Z,1510160330.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:51.157Z,1510160331.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:51.174Z,1510160331.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:51.557Z,1510160331.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:51.579Z,1510160331.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:51.952Z,1510160331.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:51.968Z,1510160331.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:52.352Z,1510160332.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:52.369Z,1510160332.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:52.750Z,1510160332.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:52.766Z,1510160332.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:53.150Z,1510160333.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:53.167Z,1510160333.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:53.553Z,1510160333.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:53.569Z,1510160333.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:53.957Z,1510160333.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:53.973Z,1510160333.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:54.358Z,1510160334.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:54.374Z,1510160334.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:54.758Z,1510160334.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:54.774Z,1510160334.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:55.150Z,1510160335.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:55.171Z,1510160335.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:55.550Z,1510160335.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:55.566Z,1510160335.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:55.952Z,1510160335.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:55.972Z,1510160335.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:56.350Z,1510160336.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:56.371Z,1510160336.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:56.762Z,1510160336.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:56.779Z,1510160336.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:57.162Z,1510160337.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:57.178Z,1510160337.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:57.557Z,1510160337.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:57.579Z,1510160337.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:57.950Z,1510160337.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:57.966Z,1510160337.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:58.353Z,1510160338.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:58.369Z,1510160338.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:58.750Z,1510160338.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:58.771Z,1510160338.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:59.149Z,1510160339.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:59.169Z,1510160339.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:59.552Z,1510160339.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:59.646Z,1510160339.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:58:59.961Z,1510160339.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:58:59.977Z,1510160339.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:00.358Z,1510160340.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:00.417Z,1510160340.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:00.758Z,1510160340.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:00.775Z,1510160340.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:01.150Z,1510160341.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:01.201Z,1510160341.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:01.547Z,1510160341.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:01.577Z,1510160341.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:01.953Z,1510160341.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:01.972Z,1510160341.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:02.350Z,1510160342.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:02.365Z,1510160342.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:02.758Z,1510160342.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:02.780Z,1510160342.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:03.162Z,1510160343.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:03.178Z,1510160343.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:03.559Z,1510160343.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:03.574Z,1510160343.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:03.947Z,1510160343.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:03.968Z,1510160343.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:04.351Z,1510160344.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:04.371Z,1510160344.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:04.750Z,1510160344.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:04.766Z,1510160344.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:05.150Z,1510160345.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:05.166Z,1510160345.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:05.551Z,1510160345.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:05.571Z,1510160345.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:05.959Z,1510160345.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:05.975Z,1510160345.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:06.358Z,1510160346.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:06.379Z,1510160346.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:06.758Z,1510160346.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:06.775Z,1510160346.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:07.150Z,1510160347.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:07.166Z,1510160347.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:07.553Z,1510160347.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:07.570Z,1510160347.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:07.953Z,1510160347.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:07.972Z,1510160347.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:08.350Z,1510160348.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:08.371Z,1510160348.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:08.758Z,1510160348.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:08.774Z,1510160348.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:09.162Z,1510160349.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:09.178Z,1510160349.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:09.559Z,1510160349.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:09.606Z,1510160349.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:09.953Z,1510160349.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:09.970Z,1510160349.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:10.351Z,1510160350.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:10.371Z,1510160350.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:10.750Z,1510160350.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:10.771Z,1510160350.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:11.149Z,1510160351.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:11.169Z,1510160351.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:11.551Z,1510160351.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:11.572Z,1510160351.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:11.959Z,1510160351.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:11.975Z,1510160351.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:12.358Z,1510160352.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:12.379Z,1510160352.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:12.759Z,1510160352.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:12.779Z,1510160352.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:13.150Z,1510160353.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:13.166Z,1510160353.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:13.550Z,1510160353.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:13.567Z,1510160353.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:13.954Z,1510160353.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:13.971Z,1510160353.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:14.351Z,1510160354.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:14.366Z,1510160354.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:14.763Z,1510160354.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:14.784Z,1510160354.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:15.162Z,1510160355.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:15.183Z,1510160355.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:15.563Z,1510160355.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:15.583Z,1510160355.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:15.954Z,1510160355.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:15.971Z,1510160355.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:16.354Z,1510160356.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:16.370Z,1510160356.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:16.750Z,1510160356.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:16.771Z,1510160356.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:17.155Z,1510160357.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:17.171Z,1510160357.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:17.553Z,1510160357.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:17.570Z,1510160357.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:17.963Z,1510160357.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:17.983Z,1510160357.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:18.364Z,1510160358.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:18.388Z,1510160358.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:18.763Z,1510160358.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:18.780Z,1510160358.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:19.147Z,1510160359.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:19.178Z,1510160359.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:19.547Z,1510160359.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:19.570Z,1510160359.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:19.953Z,1510160359.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:19.974Z,1510160359.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:20.354Z,1510160360.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:20.373Z,1510160360.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:20.764Z,1510160360.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:20.781Z,1510160360.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:21.162Z,1510160361.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:21.184Z,1510160361.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:21.563Z,1510160361.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:21.659Z,1510160361.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:21.945Z,1510160361.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:21.977Z,1510160361.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:22.344Z,1510160362.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:22.391Z,1510160362.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:22.743Z,1510160362.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:22.775Z,1510160362.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:23.162Z,1510160363.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:23.216Z,1510160363.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:23.548Z,1510160363.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:23.574Z,1510160363.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:23.969Z,1510160363.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:23.985Z,1510160363.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:24.364Z,1510160364.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:24.385Z,1510160364.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:24.764Z,1510160364.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:24.781Z,1510160364.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:25.143Z,1510160365.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:25.180Z,1510160365.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:25.543Z,1510160365.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:25.579Z,1510160365.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:25.948Z,1510160365.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:25.973Z,1510160365.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:26.343Z,1510160366.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:26.375Z,1510160366.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:26.764Z,1510160366.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:26.780Z,1510160366.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:27.163Z,1510160367.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:27.179Z,1510160367.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:27.564Z,1510160367.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:27.580Z,1510160367.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:27.943Z,1510160367.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:27.974Z,1510160367.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:28.347Z,1510160368.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:28.371Z,1510160368.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:28.743Z,1510160368.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:28.774Z,1510160368.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:29.149Z,1510160369.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:29.174Z,1510160369.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:29.543Z,1510160369.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:29.577Z,1510160369.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:29.964Z,1510160369.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:29.980Z,1510160369.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:30.362Z,1510160370.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:30.383Z,1510160370.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:30.764Z,1510160370.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:30.779Z,1510160370.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:31.143Z,1510160371.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:31.171Z,1510160371.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:31.547Z,1510160371.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:31.599Z,1510160371.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:31.944Z,1510160371.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:31.981Z,1510160371.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:32.343Z,1510160372.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:32.385Z,1510160372.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:32.758Z,1510160372.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:32.791Z,1510160372.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:33.157Z,1510160373.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:33.181Z,1510160373.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:33.557Z,1510160373.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:33.587Z,1510160373.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:33.948Z,1510160373.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:33.972Z,1510160373.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:34.347Z,1510160374.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:34.363Z,1510160374.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:37.439Z,1510160377.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:37.456Z,1510160377.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:37.607Z,1510160377.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:37.651Z,1510160377.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:38.020Z,1510160378.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:38.041Z,1510160378.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:38.421Z,1510160378.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:38.440Z,1510160378.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:38.810Z,1510160378.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:38.845Z,1510160378.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:39.195Z,1510160379.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:39.235Z,1510160379.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:39.595Z,1510160379.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:39.638Z,1510160379.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:39.997Z,1510160379.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:40.026Z,1510160380.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:40.399Z,1510160380.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:40.440Z,1510160380.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:40.814Z,1510160380.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:40.840Z,1510160380.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:41.210Z,1510160381.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:41.253Z,1510160381.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:41.609Z,1510160381.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:41.645Z,1510160381.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:41.999Z,1510160381.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:42.019Z,1510160382.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:42.395Z,1510160382.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:42.415Z,1510160382.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:42.804Z,1510160382.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:42.820Z,1510160382.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:43.207Z,1510160383.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:43.250Z,1510160383.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:43.610Z,1510160383.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:43.684Z,1510160383.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:44.013Z,1510160384.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:44.029Z,1510160384.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:44.413Z,1510160384.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:44.429Z,1510160384.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:44.799Z,1510160384.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:44.859Z,1510160384.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:45.205Z,1510160385.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:45.225Z,1510160385.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:45.606Z,1510160385.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:45.657Z,1510160385.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:46.007Z,1510160386.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:46.027Z,1510160386.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:46.405Z,1510160386.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:46.421Z,1510160386.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:46.815Z,1510160386.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:46.833Z,1510160386.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:47.214Z,1510160387.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:47.257Z,1510160387.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:47.610Z,1510160387.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:47.625Z,1510160387.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:48.006Z,1510160388.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:48.023Z,1510160388.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:48.399Z,1510160388.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:48.424Z,1510160388.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:48.805Z,1510160388.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:48.821Z,1510160388.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:49.206Z,1510160389.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:49.223Z,1510160389.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:49.610Z,1510160389.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:49.634Z,1510160389.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:50.015Z,1510160390.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:50.032Z,1510160390.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:50.411Z,1510160390.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:50.454Z,1510160390.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:50.805Z,1510160390.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:50.821Z,1510160390.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:51.205Z,1510160391.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:51.222Z,1510160391.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:51.607Z,1510160391.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:51.627Z,1510160391.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:52.002Z,1510160392.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:52.018Z,1510160392.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:52.405Z,1510160392.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:52.420Z,1510160392.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:52.814Z,1510160392.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:52.834Z,1510160392.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:53.211Z,1510160393.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:53.230Z,1510160393.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:53.610Z,1510160393.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:53.650Z,1510160393.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:54.006Z,1510160394.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:54.059Z,1510160394.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:54.405Z,1510160394.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:54.431Z,1510160394.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:54.806Z,1510160394.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:54.825Z,1510160394.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:55.207Z,1510160395.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:55.228Z,1510160395.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:55.611Z,1510160395.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:55.634Z,1510160395.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:56.013Z,1510160396.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:56.033Z,1510160396.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:56.412Z,1510160396.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:56.431Z,1510160396.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:56.799Z,1510160396.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:56.840Z,1510160396.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:57.205Z,1510160397.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:57.221Z,1510160397.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:57.610Z,1510160397.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:57.631Z,1510160397.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:58.001Z,1510160398.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:58.026Z,1510160398.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:58.405Z,1510160398.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:58.421Z,1510160398.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:58.814Z,1510160398.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:58.831Z,1510160398.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:59.212Z,1510160399.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:59.234Z,1510160399.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T16:59:59.611Z,1510160399.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T16:59:59.630Z,1510160399.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:00.007Z,1510160400.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:00.040Z,1510160400.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:00.405Z,1510160400.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:00.428Z,1510160400.428 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:00.428Z,1510160400.428 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72
2017-11-08T17:00:00.428Z,1510160400.428 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T17:00:00.430Z,1510160400.430 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:00.430Z,1510160400.430 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72
2017-11-08T17:00:00.430Z,1510160400.430 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T17:00:00.434Z,1510160400.434 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:00.434Z,1510160400.434 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 72
2017-11-08T17:00:00.434Z,1510160400.434 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T17:00:00.529Z,1510160400.529 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T17:00:00.529Z,1510160400.529 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T17:00:00.529Z,1510160400.529 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T17:00:00.796Z,1510160400.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:00.905Z,1510160400.905 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T17:00:00.905Z,1510160400.905 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72
2017-11-08T17:00:00.905Z,1510160400.905 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T17:00:00.905Z,1510160400.905 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72
2017-11-08T17:00:00.906Z,1510160400.906 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T17:00:00.906Z,1510160400.906 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 72
2017-11-08T17:00:01.203Z,1510160401.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:01.229Z,1510160401.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T17:00:01.230Z,1510160401.230 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:00:01.230Z,1510160401.230 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:00:01.230Z,1510160401.230 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T17:00:01.231Z,1510160401.231 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:00:01.231Z,1510160401.231 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:00:01.231Z,1510160401.231 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T17:00:01.232Z,1510160401.232 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:00:01.232Z,1510160401.232 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:00:01.610Z,1510160401.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:01.633Z,1510160401.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T17:00:01.634Z,1510160401.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:02.019Z,1510160402.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:02.042Z,1510160402.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T17:00:02.043Z,1510160402.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:02.422Z,1510160402.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:02.441Z,1510160402.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T17:00:02.442Z,1510160402.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:02.795Z,1510160402.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:02.828Z,1510160402.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T17:00:02.829Z,1510160402.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:03.199Z,1510160403.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:03.224Z,1510160403.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T17:00:03.225Z,1510160403.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:03.600Z,1510160403.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:03.638Z,1510160403.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T17:00:03.640Z,1510160403.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:04.004Z,1510160404.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:04.037Z,1510160404.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T17:00:04.038Z,1510160404.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:04.399Z,1510160404.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:04.429Z,1510160404.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T17:00:04.430Z,1510160404.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:04.817Z,1510160404.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:04.833Z,1510160404.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T17:00:04.834Z,1510160404.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:05.223Z,1510160405.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:05.243Z,1510160405.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T17:00:05.244Z,1510160405.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:05.613Z,1510160405.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:05.679Z,1510160405.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-08T17:00:05.680Z,1510160405.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:05.000Z,1510160406.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:06.065Z,1510160406.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T17:00:06.066Z,1510160406.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:06.399Z,1510160406.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:06.431Z,1510160406.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T17:00:06.433Z,1510160406.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:06.800Z,1510160406.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:06.856Z,1510160406.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T17:00:06.857Z,1510160406.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:07.195Z,1510160407.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:07.233Z,1510160407.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T17:00:07.234Z,1510160407.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:07.619Z,1510160407.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:07.674Z,1510160407.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T17:00:07.675Z,1510160407.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:08.020Z,1510160408.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:08.055Z,1510160408.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T17:00:08.056Z,1510160408.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:08.408Z,1510160408.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:08.438Z,1510160408.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T17:00:08.439Z,1510160408.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:08.800Z,1510160408.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:08.834Z,1510160408.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T17:00:08.835Z,1510160408.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:09.199Z,1510160409.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:09.239Z,1510160409.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T17:00:09.240Z,1510160409.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:09.600Z,1510160409.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:09.615Z,1510160409.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T17:00:09.616Z,1510160409.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:10.002Z,1510160410.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:10.035Z,1510160410.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T17:00:10.037Z,1510160410.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:10.407Z,1510160410.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:10.424Z,1510160410.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T17:00:10.426Z,1510160410.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:10.810Z,1510160410.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:10.841Z,1510160410.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T17:00:10.842Z,1510160410.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:11.215Z,1510160411.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:11.259Z,1510160411.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T17:00:11.260Z,1510160411.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:11.611Z,1510160411.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:11.633Z,1510160411.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T17:00:11.634Z,1510160411.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:12.006Z,1510160412.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:12.024Z,1510160412.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T17:00:12.025Z,1510160412.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:12.405Z,1510160412.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:12.426Z,1510160412.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T17:00:12.427Z,1510160412.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:12.806Z,1510160412.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:12.822Z,1510160412.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T17:00:12.823Z,1510160412.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:13.202Z,1510160413.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:13.217Z,1510160413.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T17:00:13.218Z,1510160413.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:13.614Z,1510160413.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:13.634Z,1510160413.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T17:00:13.635Z,1510160413.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:14.015Z,1510160414.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:14.040Z,1510160414.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T17:00:14.062Z,1510160414.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:14.413Z,1510160414.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:14.458Z,1510160414.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T17:00:14.459Z,1510160414.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:14.805Z,1510160414.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:14.821Z,1510160414.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T17:00:14.822Z,1510160414.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:15.203Z,1510160415.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:15.226Z,1510160415.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T17:00:15.227Z,1510160415.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:15.600Z,1510160415.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:15.620Z,1510160415.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T17:00:15.621Z,1510160415.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:16.005Z,1510160416.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:16.063Z,1510160416.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T17:00:16.064Z,1510160416.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:16.401Z,1510160416.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:16.417Z,1510160416.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T17:00:16.418Z,1510160416.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:16.812Z,1510160416.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:16.832Z,1510160416.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T17:00:16.833Z,1510160416.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:17.216Z,1510160417.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:17.233Z,1510160417.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T17:00:17.234Z,1510160417.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:17.610Z,1510160417.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:17.658Z,1510160417.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T17:00:17.659Z,1510160417.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:18.006Z,1510160418.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:18.022Z,1510160418.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T17:00:18.023Z,1510160418.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:18.405Z,1510160418.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:18.422Z,1510160418.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T17:00:18.423Z,1510160418.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:18.806Z,1510160418.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:18.826Z,1510160418.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T17:00:18.827Z,1510160418.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:19.202Z,1510160419.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:19.217Z,1510160419.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T17:00:19.218Z,1510160419.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:19.614Z,1510160419.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:19.630Z,1510160419.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T17:00:19.631Z,1510160419.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:20.014Z,1510160420.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:20.033Z,1510160420.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T17:00:20.034Z,1510160420.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:20.417Z,1510160420.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:20.434Z,1510160420.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:20.805Z,1510160420.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:20.840Z,1510160420.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:21.205Z,1510160421.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:21.221Z,1510160421.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:21.606Z,1510160421.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:21.623Z,1510160421.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:22.006Z,1510160422.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:22.026Z,1510160422.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:22.405Z,1510160422.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:22.427Z,1510160422.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:22.815Z,1510160422.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:22.833Z,1510160422.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:23.214Z,1510160423.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:23.235Z,1510160423.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:23.616Z,1510160423.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:23.634Z,1510160423.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:24.006Z,1510160424.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:24.039Z,1510160424.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:24.405Z,1510160424.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:24.422Z,1510160424.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:24.806Z,1510160424.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:24.825Z,1510160424.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:25.206Z,1510160425.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:25.226Z,1510160425.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:25.614Z,1510160425.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:25.636Z,1510160425.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:26.014Z,1510160426.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:26.040Z,1510160426.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:26.415Z,1510160426.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:26.439Z,1510160426.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:26.806Z,1510160426.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:26.826Z,1510160426.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:27.205Z,1510160427.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:27.222Z,1510160427.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:27.602Z,1510160427.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:27.618Z,1510160427.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:28.006Z,1510160428.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:28.068Z,1510160428.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:28.405Z,1510160428.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:28.445Z,1510160428.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:28.816Z,1510160428.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:28.832Z,1510160428.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:29.219Z,1510160429.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:29.290Z,1510160429.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:29.615Z,1510160429.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:29.635Z,1510160429.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:29.995Z,1510160429.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:30.044Z,1510160430.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:30.399Z,1510160430.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:30.425Z,1510160430.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:30.800Z,1510160430.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:30.833Z,1510160430.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:31.195Z,1510160431.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:31.221Z,1510160431.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:31.621Z,1510160431.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:31.638Z,1510160431.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:32.019Z,1510160432.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:32.068Z,1510160432.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:32.420Z,1510160432.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:32.442Z,1510160432.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:32.795Z,1510160432.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:32.821Z,1510160432.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:33.208Z,1510160433.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:33.240Z,1510160433.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:33.597Z,1510160433.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:33.626Z,1510160433.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:34.002Z,1510160434.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:34.040Z,1510160434.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:34.400Z,1510160434.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:34.439Z,1510160434.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:38.045Z,1510160438.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:38.093Z,1510160438.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:38.229Z,1510160438.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:38.274Z,1510160438.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:38.620Z,1510160438.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:38.636Z,1510160438.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:39.003Z,1510160439.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:39.029Z,1510160439.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:39.395Z,1510160439.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:39.428Z,1510160439.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:39.796Z,1510160439.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:39.812Z,1510160439.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:40.199Z,1510160440.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:40.215Z,1510160440.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:40.610Z,1510160440.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:40.636Z,1510160440.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:41.013Z,1510160441.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:41.038Z,1510160441.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:41.409Z,1510160441.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:41.437Z,1510160441.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:41.799Z,1510160441.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:41.840Z,1510160441.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:42.199Z,1510160442.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:42.214Z,1510160442.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:42.599Z,1510160442.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:42.615Z,1510160442.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:43.000Z,1510160443.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:43.044Z,1510160443.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:43.399Z,1510160443.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:43.414Z,1510160443.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:43.813Z,1510160443.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:43.840Z,1510160443.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:44.213Z,1510160444.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:44.240Z,1510160444.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:44.609Z,1510160444.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:44.642Z,1510160444.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:44.000Z,1510160445.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:45.016Z,1510160445.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:45.400Z,1510160445.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:45.416Z,1510160445.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:45.801Z,1510160445.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:45.844Z,1510160445.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:46.200Z,1510160446.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:46.217Z,1510160446.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:46.618Z,1510160446.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:46.654Z,1510160446.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:47.017Z,1510160447.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:47.051Z,1510160447.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:47.414Z,1510160447.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:47.449Z,1510160447.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:47.810Z,1510160447.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:47.827Z,1510160447.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:48.200Z,1510160448.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:48.231Z,1510160448.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:48.606Z,1510160448.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:48.622Z,1510160448.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:49.007Z,1510160449.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:49.023Z,1510160449.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:49.426Z,1510160449.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:49.454Z,1510160449.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:49.814Z,1510160449.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:49.908Z,1510160449.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:50.216Z,1510160450.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:50.233Z,1510160450.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:50.615Z,1510160450.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:50.669Z,1510160450.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:50.000Z,1510160451.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:51.026Z,1510160451.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:51.395Z,1510160451.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:51.463Z,1510160451.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:51.800Z,1510160451.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:51.826Z,1510160451.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:52.200Z,1510160452.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:52.226Z,1510160452.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:52.616Z,1510160452.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:52.632Z,1510160452.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:53.015Z,1510160453.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:53.030Z,1510160453.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:53.420Z,1510160453.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:53.443Z,1510160453.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:53.795Z,1510160453.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:53.828Z,1510160453.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:54.199Z,1510160454.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:54.239Z,1510160454.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:54.615Z,1510160454.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:54.636Z,1510160454.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:55.010Z,1510160455.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:55.026Z,1510160455.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:55.395Z,1510160455.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:55.430Z,1510160455.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:55.822Z,1510160455.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:55.838Z,1510160455.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:56.217Z,1510160456.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:56.234Z,1510160456.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:56.605Z,1510160456.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:56.630Z,1510160456.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:57.000Z,1510160457.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:57.042Z,1510160457.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:57.396Z,1510160457.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:57.428Z,1510160457.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:57.800Z,1510160457.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:57.834Z,1510160457.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:58.207Z,1510160458.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:58.243Z,1510160458.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:58.610Z,1510160458.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:58.637Z,1510160458.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:59.025Z,1510160459.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:59.040Z,1510160459.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:59.422Z,1510160459.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:59.438Z,1510160459.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:00:59.799Z,1510160459.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:00:59.851Z,1510160459.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:00.199Z,1510160460.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:00.234Z,1510160460.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:00.600Z,1510160460.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:00.628Z,1510160460.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:01.000Z,1510160461.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:01.029Z,1510160461.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:01.399Z,1510160461.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:01.419Z,1510160461.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:01.818Z,1510160461.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:01.851Z,1510160461.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:02.209Z,1510160462.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:02.244Z,1510160462.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:02.615Z,1510160462.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:02.640Z,1510160462.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:02.996Z,1510160462.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:03.016Z,1510160463.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:03.400Z,1510160463.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:03.417Z,1510160463.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:03.806Z,1510160463.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:03.841Z,1510160463.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:04.207Z,1510160464.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:04.244Z,1510160464.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:04.617Z,1510160464.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:04.655Z,1510160464.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:05.024Z,1510160465.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:05.049Z,1510160465.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:05.418Z,1510160465.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:05.445Z,1510160465.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:05.821Z,1510160465.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:05.851Z,1510160465.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:06.204Z,1510160466.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:06.249Z,1510160466.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:06.597Z,1510160466.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:06.615Z,1510160466.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:07.005Z,1510160467.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:07.026Z,1510160467.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:07.412Z,1510160467.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:07.455Z,1510160467.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:07.822Z,1510160467.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:07.848Z,1510160467.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:08.218Z,1510160468.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:08.246Z,1510160468.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:08.622Z,1510160468.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:08.653Z,1510160468.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:09.003Z,1510160469.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:09.019Z,1510160469.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:09.407Z,1510160469.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:09.430Z,1510160469.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:09.806Z,1510160469.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:09.837Z,1510160469.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:10.207Z,1510160470.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:10.224Z,1510160470.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:10.620Z,1510160470.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:10.636Z,1510160470.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:11.035Z,1510160471.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:11.052Z,1510160471.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:11.423Z,1510160471.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:11.446Z,1510160471.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:11.805Z,1510160471.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:11.833Z,1510160471.833 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T17:01:11.833Z,1510160471.833 [BPC1] Data Fault, FailCount= 1
2017-11-08T17:01:11.833Z,1510160471.833 [BPC1](ERROR): Data Fault
2017-11-08T17:01:11.846Z,1510160471.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:11.943Z,1510160471.943 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T17:01:12.195Z,1510160472.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:12.214Z,1510160472.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:12.599Z,1510160472.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:12.615Z,1510160472.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:13.009Z,1510160473.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:13.042Z,1510160473.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:13.130Z,1510160473.130 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T17:01:13.130Z,1510160473.130 [BPC1] No Fault, FailCount= 1
2017-11-08T17:01:13.398Z,1510160473.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:13.479Z,1510160473.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:13.813Z,1510160473.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:13.843Z,1510160473.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:14.213Z,1510160474.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:14.240Z,1510160474.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:14.614Z,1510160474.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:14.636Z,1510160474.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:14.995Z,1510160474.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:15.011Z,1510160475.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:15.400Z,1510160475.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:15.447Z,1510160475.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:15.801Z,1510160475.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:15.820Z,1510160475.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:16.196Z,1510160476.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:16.211Z,1510160476.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:16.614Z,1510160476.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:16.639Z,1510160476.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:17.013Z,1510160477.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:17.047Z,1510160477.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:17.421Z,1510160477.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:17.443Z,1510160477.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:17.808Z,1510160477.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:17.824Z,1510160477.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:18.209Z,1510160478.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:18.229Z,1510160478.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:18.602Z,1510160478.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:18.621Z,1510160478.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:19.007Z,1510160479.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:19.027Z,1510160479.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:19.405Z,1510160479.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:19.428Z,1510160479.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:19.822Z,1510160479.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:19.838Z,1510160479.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:20.222Z,1510160480.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:20.244Z,1510160480.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:20.616Z,1510160480.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:20.643Z,1510160480.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:20.995Z,1510160480.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:21.031Z,1510160481.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:21.402Z,1510160481.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:21.434Z,1510160481.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:21.800Z,1510160481.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:21.849Z,1510160481.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:22.195Z,1510160482.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:22.245Z,1510160482.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:22.618Z,1510160482.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:22.647Z,1510160482.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:23.023Z,1510160483.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:23.039Z,1510160483.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:23.440Z,1510160483.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:23.467Z,1510160483.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:23.800Z,1510160483.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:23.828Z,1510160483.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:24.211Z,1510160484.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:24.236Z,1510160484.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:24.595Z,1510160484.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:24.646Z,1510160484.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:25.000Z,1510160485.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:25.016Z,1510160485.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:25.399Z,1510160485.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:25.419Z,1510160485.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:25.814Z,1510160485.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:25.854Z,1510160485.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:26.214Z,1510160486.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:26.245Z,1510160486.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:26.614Z,1510160486.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:26.646Z,1510160486.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:26.996Z,1510160486.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:27.012Z,1510160487.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:27.399Z,1510160487.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:27.416Z,1510160487.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:27.800Z,1510160487.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:27.817Z,1510160487.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:28.196Z,1510160488.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:28.212Z,1510160488.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:28.621Z,1510160488.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:28.657Z,1510160488.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:29.018Z,1510160489.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:29.050Z,1510160489.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:29.413Z,1510160489.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:29.450Z,1510160489.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:29.803Z,1510160489.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:29.824Z,1510160489.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:30.203Z,1510160490.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:30.224Z,1510160490.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:30.602Z,1510160490.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:30.618Z,1510160490.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:31.023Z,1510160491.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:31.047Z,1510160491.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:31.403Z,1510160491.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:31.424Z,1510160491.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:31.813Z,1510160491.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:31.848Z,1510160491.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:32.222Z,1510160492.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:32.246Z,1510160492.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:32.622Z,1510160492.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:32.647Z,1510160492.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:33.003Z,1510160493.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:33.011Z,1510160493.011 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-08T17:01:33.011Z,1510160493.011 [BPC1] Data Fault, FailCount= 2
2017-11-08T17:01:33.011Z,1510160493.011 [BPC1](ERROR): Data Fault
2017-11-08T17:01:33.021Z,1510160493.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:33.117Z,1510160493.117 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T17:01:33.403Z,1510160493.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:33.427Z,1510160493.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:33.804Z,1510160493.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:33.820Z,1510160493.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:34.206Z,1510160494.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:34.222Z,1510160494.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:34.297Z,1510160494.297 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T17:01:34.297Z,1510160494.297 [BPC1] No Fault, FailCount= 2
2017-11-08T17:01:34.622Z,1510160494.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:34.703Z,1510160494.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:37.704Z,1510160497.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:37.720Z,1510160497.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:37.834Z,1510160497.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:37.879Z,1510160497.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:38.232Z,1510160498.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:38.264Z,1510160498.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:38.628Z,1510160498.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:38.660Z,1510160498.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:39.028Z,1510160499.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:39.044Z,1510160499.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:39.428Z,1510160499.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:39.444Z,1510160499.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:39.838Z,1510160499.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:39.862Z,1510160499.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:40.238Z,1510160500.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:40.274Z,1510160500.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:40.642Z,1510160500.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:40.674Z,1510160500.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:41.031Z,1510160501.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:41.048Z,1510160501.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:41.432Z,1510160501.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:41.448Z,1510160501.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:41.832Z,1510160501.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:41.856Z,1510160501.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:42.234Z,1510160502.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:42.250Z,1510160502.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:42.634Z,1510160502.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:42.650Z,1510160502.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:43.045Z,1510160503.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:43.095Z,1510160503.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:43.441Z,1510160503.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:43.457Z,1510160503.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:43.831Z,1510160503.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:43.848Z,1510160503.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:44.231Z,1510160504.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:44.251Z,1510160504.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:44.630Z,1510160504.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:44.647Z,1510160504.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:45.032Z,1510160505.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:45.056Z,1510160505.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:45.431Z,1510160505.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:45.448Z,1510160505.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:45.841Z,1510160505.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:45.858Z,1510160505.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:46.250Z,1510160506.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:46.280Z,1510160506.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:46.638Z,1510160506.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:46.655Z,1510160506.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:47.033Z,1510160507.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:47.049Z,1510160507.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:47.433Z,1510160507.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:47.449Z,1510160507.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:47.832Z,1510160507.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:47.852Z,1510160507.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:48.233Z,1510160508.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:48.249Z,1510160508.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:48.646Z,1510160508.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:48.681Z,1510160508.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:49.041Z,1510160509.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:49.058Z,1510160509.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:49.441Z,1510160509.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:49.457Z,1510160509.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:49.827Z,1510160509.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:49.855Z,1510160509.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:50.233Z,1510160510.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:50.250Z,1510160510.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:50.633Z,1510160510.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:50.653Z,1510160510.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:51.034Z,1510160511.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:51.050Z,1510160511.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:51.433Z,1510160511.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:51.451Z,1510160511.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:51.842Z,1510160511.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:51.858Z,1510160511.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:52.250Z,1510160512.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:52.281Z,1510160512.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:52.638Z,1510160512.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:52.655Z,1510160512.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:53.030Z,1510160513.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:53.046Z,1510160513.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:53.433Z,1510160513.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:53.449Z,1510160513.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:53.833Z,1510160513.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:53.850Z,1510160513.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:54.234Z,1510160514.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:54.250Z,1510160514.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:54.638Z,1510160514.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:54.646Z,1510160514.646 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T17:01:54.646Z,1510160514.646 [BPC1] Data Fault, FailCount= 3
2017-11-08T17:01:54.647Z,1510160514.647 [BPC1](ERROR): Data Fault
2017-11-08T17:01:54.656Z,1510160514.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:54.749Z,1510160514.749 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T17:01:55.038Z,1510160515.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:55.054Z,1510160515.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:55.440Z,1510160515.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:55.456Z,1510160515.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:55.826Z,1510160515.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:55.854Z,1510160515.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:55.937Z,1510160515.937 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T17:01:55.937Z,1510160515.937 [BPC1] No Fault, FailCount= 3
2017-11-08T17:01:56.233Z,1510160516.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:56.303Z,1510160516.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:56.634Z,1510160516.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:56.650Z,1510160516.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:57.035Z,1510160517.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:57.051Z,1510160517.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:57.433Z,1510160517.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:57.449Z,1510160517.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:57.839Z,1510160517.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:57.859Z,1510160517.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:58.242Z,1510160518.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:58.258Z,1510160518.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:58.638Z,1510160518.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:58.659Z,1510160518.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:59.034Z,1510160519.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:59.049Z,1510160519.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:59.433Z,1510160519.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:59.449Z,1510160519.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:01:59.833Z,1510160519.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:01:59.853Z,1510160519.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:00.234Z,1510160520.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:00.249Z,1510160520.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:00.638Z,1510160520.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:00.654Z,1510160520.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:01.042Z,1510160521.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:01.058Z,1510160521.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:01.441Z,1510160521.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:01.463Z,1510160521.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:01.827Z,1510160521.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:01.848Z,1510160521.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:02.233Z,1510160522.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:02.249Z,1510160522.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:02.634Z,1510160522.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:02.650Z,1510160522.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:03.030Z,1510160523.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:03.046Z,1510160523.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:03.432Z,1510160523.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:03.449Z,1510160523.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:03.844Z,1510160523.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:03.860Z,1510160523.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:04.238Z,1510160524.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:04.259Z,1510160524.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:04.638Z,1510160524.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:04.694Z,1510160524.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:05.034Z,1510160525.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:05.050Z,1510160525.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:05.433Z,1510160525.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:05.456Z,1510160525.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:05.833Z,1510160525.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:05.853Z,1510160525.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:06.234Z,1510160526.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:06.250Z,1510160526.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:06.638Z,1510160526.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:06.660Z,1510160526.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:07.041Z,1510160527.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:07.058Z,1510160527.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:07.442Z,1510160527.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:07.458Z,1510160527.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:07.826Z,1510160527.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:07.854Z,1510160527.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:08.232Z,1510160528.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:08.249Z,1510160528.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:08.634Z,1510160528.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:08.651Z,1510160528.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:09.030Z,1510160529.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:09.050Z,1510160529.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:09.433Z,1510160529.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:09.449Z,1510160529.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:09.843Z,1510160529.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:09.864Z,1510160529.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:10.240Z,1510160530.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:10.257Z,1510160530.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:10.642Z,1510160530.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:10.658Z,1510160530.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:11.034Z,1510160531.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:11.050Z,1510160531.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:11.433Z,1510160531.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:11.449Z,1510160531.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:11.835Z,1510160531.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:11.855Z,1510160531.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:12.234Z,1510160532.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:12.250Z,1510160532.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:12.643Z,1510160532.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:12.664Z,1510160532.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:13.042Z,1510160533.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:13.063Z,1510160533.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:13.443Z,1510160533.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:13.460Z,1510160533.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:13.833Z,1510160533.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:13.849Z,1510160533.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:14.231Z,1510160534.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:14.253Z,1510160534.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:14.634Z,1510160534.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:14.654Z,1510160534.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:15.030Z,1510160535.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:15.047Z,1510160535.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:15.433Z,1510160535.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:15.450Z,1510160535.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:15.843Z,1510160535.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:15.860Z,1510160535.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:16.243Z,1510160536.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:16.311Z,1510160536.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:16.647Z,1510160536.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:16.715Z,1510160536.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:17.027Z,1510160537.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:17.053Z,1510160537.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:17.427Z,1510160537.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:17.453Z,1510160537.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:17.837Z,1510160537.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:17.892Z,1510160537.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:18.228Z,1510160538.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:18.262Z,1510160538.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:18.646Z,1510160538.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:18.703Z,1510160538.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:19.048Z,1510160539.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:19.065Z,1510160539.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:19.449Z,1510160539.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:19.465Z,1510160539.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:19.823Z,1510160539.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:19.858Z,1510160539.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:20.227Z,1510160540.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:20.260Z,1510160540.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:20.628Z,1510160540.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:20.660Z,1510160540.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:21.028Z,1510160541.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:21.059Z,1510160541.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:21.431Z,1510160541.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:21.457Z,1510160541.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:21.848Z,1510160541.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:21.865Z,1510160541.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:22.244Z,1510160542.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:22.268Z,1510160542.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:22.645Z,1510160542.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:22.661Z,1510160542.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:23.024Z,1510160543.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:23.048Z,1510160543.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:23.424Z,1510160543.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:23.440Z,1510160543.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:23.828Z,1510160543.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:23.861Z,1510160543.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:24.223Z,1510160544.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:24.240Z,1510160544.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:24.638Z,1510160544.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:24.670Z,1510160544.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:25.042Z,1510160545.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:25.075Z,1510160545.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:25.446Z,1510160545.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:25.473Z,1510160545.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:25.824Z,1510160545.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:25.847Z,1510160545.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:26.234Z,1510160546.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:26.250Z,1510160546.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:26.627Z,1510160546.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:26.643Z,1510160546.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:27.028Z,1510160547.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:27.083Z,1510160547.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:27.431Z,1510160547.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:27.447Z,1510160547.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:27.838Z,1510160547.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:27.854Z,1510160547.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:28.238Z,1510160548.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:28.255Z,1510160548.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:28.642Z,1510160548.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:28.680Z,1510160548.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:29.030Z,1510160549.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:29.047Z,1510160549.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:29.429Z,1510160549.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:29.446Z,1510160549.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:29.832Z,1510160549.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:29.853Z,1510160549.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:30.230Z,1510160550.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:30.252Z,1510160550.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:30.638Z,1510160550.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:30.655Z,1510160550.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:31.041Z,1510160551.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:31.058Z,1510160551.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:31.437Z,1510160551.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:31.453Z,1510160551.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:31.829Z,1510160551.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:31.845Z,1510160551.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:32.232Z,1510160552.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:32.249Z,1510160552.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:32.630Z,1510160552.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:32.646Z,1510160552.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:33.029Z,1510160553.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:33.049Z,1510160553.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:33.431Z,1510160553.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:33.455Z,1510160553.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:33.840Z,1510160553.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:33.856Z,1510160553.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:34.242Z,1510160554.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:34.258Z,1510160554.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:34.642Z,1510160554.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:34.659Z,1510160554.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:37.742Z,1510160557.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:37.758Z,1510160557.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:37.896Z,1510160557.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:37.939Z,1510160557.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:38.310Z,1510160558.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:38.334Z,1510160558.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:38.705Z,1510160558.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:38.738Z,1510160558.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:39.110Z,1510160559.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:39.160Z,1510160559.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:39.494Z,1510160559.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:39.559Z,1510160559.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:39.895Z,1510160559.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:39.911Z,1510160559.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:40.294Z,1510160560.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:40.348Z,1510160560.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:40.706Z,1510160560.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:40.738Z,1510160560.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:41.104Z,1510160561.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:41.145Z,1510160561.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:41.502Z,1510160561.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:41.518Z,1510160561.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:41.894Z,1510160561.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:41.911Z,1510160561.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:42.293Z,1510160562.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:42.315Z,1510160562.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:42.693Z,1510160562.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:42.709Z,1510160562.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:43.094Z,1510160563.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:43.110Z,1510160563.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:43.501Z,1510160563.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:43.517Z,1510160563.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:43.905Z,1510160563.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:43.922Z,1510160563.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:44.306Z,1510160564.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:44.322Z,1510160564.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:44.694Z,1510160564.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:44.710Z,1510160564.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:45.094Z,1510160565.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:45.110Z,1510160565.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:45.494Z,1510160565.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:45.511Z,1510160565.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:45.894Z,1510160565.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:45.909Z,1510160565.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:46.294Z,1510160566.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:46.310Z,1510160566.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:46.706Z,1510160566.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:46.722Z,1510160566.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:47.101Z,1510160567.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:47.117Z,1510160567.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:47.506Z,1510160567.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:47.522Z,1510160567.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:47.894Z,1510160567.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:47.911Z,1510160567.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:48.293Z,1510160568.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:48.309Z,1510160568.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:48.695Z,1510160568.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:48.716Z,1510160568.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:49.094Z,1510160569.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:49.110Z,1510160569.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:49.501Z,1510160569.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:49.547Z,1510160569.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:49.902Z,1510160569.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:49.918Z,1510160569.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:50.306Z,1510160570.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:50.322Z,1510160570.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:50.693Z,1510160570.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:50.715Z,1510160570.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:51.095Z,1510160571.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:51.111Z,1510160571.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:51.494Z,1510160571.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:51.511Z,1510160571.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:51.894Z,1510160571.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:51.915Z,1510160571.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:52.294Z,1510160572.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:52.311Z,1510160572.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:52.706Z,1510160572.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:52.722Z,1510160572.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:52.821Z,1510160572.821 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T17:02:53.105Z,1510160573.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:53.121Z,1510160573.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:53.506Z,1510160573.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:53.522Z,1510160573.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:53.894Z,1510160573.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:53.911Z,1510160573.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:54.293Z,1510160574.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:54.359Z,1510160574.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:54.695Z,1510160574.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:54.715Z,1510160574.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:55.094Z,1510160575.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:55.110Z,1510160575.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:55.501Z,1510160575.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:55.517Z,1510160575.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:55.906Z,1510160575.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:55.922Z,1510160575.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:56.306Z,1510160576.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:56.322Z,1510160576.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:56.693Z,1510160576.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:56.715Z,1510160576.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:57.095Z,1510160577.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:57.111Z,1510160577.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:57.495Z,1510160577.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:57.511Z,1510160577.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:57.894Z,1510160577.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:57.909Z,1510160577.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:58.295Z,1510160578.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:58.311Z,1510160578.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:58.706Z,1510160578.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:58.722Z,1510160578.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:59.101Z,1510160579.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:59.117Z,1510160579.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:59.506Z,1510160579.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:59.522Z,1510160579.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:02:59.895Z,1510160579.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:02:59.916Z,1510160579.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:00.294Z,1510160580.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:00.310Z,1510160580.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:00.696Z,1510160580.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:00.712Z,1510160580.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:01.095Z,1510160581.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:01.116Z,1510160581.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:01.501Z,1510160581.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:01.563Z,1510160581.563 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:01.563Z,1510160581.563 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73
2017-11-08T17:03:01.563Z,1510160581.563 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T17:03:01.565Z,1510160581.565 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:01.565Z,1510160581.565 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73
2017-11-08T17:03:01.565Z,1510160581.565 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T17:03:01.566Z,1510160581.566 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:01.566Z,1510160581.566 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 73
2017-11-08T17:03:01.567Z,1510160581.567 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T17:03:01.653Z,1510160581.653 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T17:03:01.653Z,1510160581.653 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T17:03:01.653Z,1510160581.653 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T17:03:01.906Z,1510160581.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:02.018Z,1510160582.018 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T17:03:02.018Z,1510160582.018 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73
2017-11-08T17:03:02.019Z,1510160582.019 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T17:03:02.019Z,1510160582.019 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73
2017-11-08T17:03:02.020Z,1510160582.020 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T17:03:02.020Z,1510160582.020 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 73
2017-11-08T17:03:02.307Z,1510160582.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:02.354Z,1510160582.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T17:03:02.355Z,1510160582.355 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:03:02.355Z,1510160582.355 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:03:02.356Z,1510160582.356 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T17:03:02.356Z,1510160582.356 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:03:02.356Z,1510160582.356 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:03:02.357Z,1510160582.357 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T17:03:02.357Z,1510160582.357 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:03:02.358Z,1510160582.358 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:03:02.688Z,1510160582.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:02.721Z,1510160582.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T17:03:02.722Z,1510160582.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:03.098Z,1510160583.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:03.152Z,1510160583.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T17:03:03.153Z,1510160583.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:03.507Z,1510160583.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:03.523Z,1510160583.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T17:03:03.524Z,1510160583.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:03.912Z,1510160583.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:03.927Z,1510160583.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T17:03:03.928Z,1510160583.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:04.312Z,1510160584.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:04.335Z,1510160584.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T17:03:04.336Z,1510160584.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:04.698Z,1510160584.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:04.714Z,1510160584.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T17:03:04.715Z,1510160584.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:05.088Z,1510160585.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:05.119Z,1510160585.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T17:03:05.120Z,1510160585.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:05.497Z,1510160585.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:05.514Z,1510160585.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T17:03:05.515Z,1510160585.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:05.908Z,1510160585.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:05.924Z,1510160585.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T17:03:05.925Z,1510160585.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:06.312Z,1510160586.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:06.328Z,1510160586.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T17:03:06.329Z,1510160586.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:06.708Z,1510160586.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:06.724Z,1510160586.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T17:03:06.725Z,1510160586.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:07.095Z,1510160587.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:07.117Z,1510160587.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T17:03:07.118Z,1510160587.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:07.488Z,1510160587.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:07.519Z,1510160587.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T17:03:07.520Z,1510160587.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:07.900Z,1510160587.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:07.915Z,1510160587.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T17:03:07.917Z,1510160587.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:08.295Z,1510160588.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:08.323Z,1510160588.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T17:03:08.324Z,1510160588.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:08.713Z,1510160588.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:08.735Z,1510160588.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T17:03:08.736Z,1510160588.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:09.109Z,1510160589.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:09.125Z,1510160589.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T17:03:09.126Z,1510160589.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:09.509Z,1510160589.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:09.525Z,1510160589.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T17:03:09.526Z,1510160589.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:09.887Z,1510160589.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:09.919Z,1510160589.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T17:03:09.920Z,1510160589.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:10.287Z,1510160590.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:10.321Z,1510160590.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T17:03:10.322Z,1510160590.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:10.701Z,1510160590.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:10.723Z,1510160590.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T17:03:10.724Z,1510160590.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:11.101Z,1510160591.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:11.117Z,1510160591.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T17:03:11.118Z,1510160591.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:11.492Z,1510160591.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:11.561Z,1510160591.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T17:03:11.562Z,1510160591.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:11.908Z,1510160591.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:11.925Z,1510160591.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T17:03:11.926Z,1510160591.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:12.308Z,1510160592.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:12.324Z,1510160592.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T17:03:12.326Z,1510160592.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:12.709Z,1510160592.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:12.725Z,1510160592.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T17:03:12.726Z,1510160592.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:13.091Z,1510160593.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:13.123Z,1510160593.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T17:03:13.124Z,1510160593.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:13.491Z,1510160593.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:13.517Z,1510160593.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T17:03:13.518Z,1510160593.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:13.892Z,1510160593.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:13.916Z,1510160593.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T17:03:13.917Z,1510160593.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:14.287Z,1510160594.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:14.323Z,1510160594.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T17:03:14.324Z,1510160594.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:14.707Z,1510160594.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:14.724Z,1510160594.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T17:03:14.725Z,1510160594.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:15.107Z,1510160595.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:15.124Z,1510160595.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T17:03:15.125Z,1510160595.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:15.507Z,1510160595.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:15.524Z,1510160595.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T17:03:15.525Z,1510160595.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:15.891Z,1510160595.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:15.917Z,1510160595.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T17:03:15.917Z,1510160595.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:16.287Z,1510160596.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:16.312Z,1510160596.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2017-11-08T17:03:16.313Z,1510160596.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:16.691Z,1510160596.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:16.716Z,1510160596.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T17:03:16.717Z,1510160596.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:17.088Z,1510160597.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:17.113Z,1510160597.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T17:03:17.114Z,1510160597.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:17.491Z,1510160597.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:17.516Z,1510160597.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T17:03:17.517Z,1510160597.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:17.914Z,1510160597.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:17.935Z,1510160597.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T17:03:17.936Z,1510160597.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:18.312Z,1510160598.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:18.335Z,1510160598.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T17:03:18.336Z,1510160598.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:18.706Z,1510160598.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:18.726Z,1510160598.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T17:03:18.727Z,1510160598.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:19.091Z,1510160599.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:19.120Z,1510160599.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T17:03:19.125Z,1510160599.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:19.487Z,1510160599.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:19.517Z,1510160599.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T17:03:19.518Z,1510160599.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:19.889Z,1510160599.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:19.921Z,1510160599.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T17:03:19.922Z,1510160599.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:20.291Z,1510160600.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:20.324Z,1510160600.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T17:03:20.329Z,1510160600.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:20.701Z,1510160600.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:20.734Z,1510160600.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T17:03:20.734Z,1510160600.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:21.074Z,1510160601.074 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T17:03:21.074Z,1510160601.074 [NAL9602] Data Fault, FailCount= 1
2017-11-08T17:03:21.074Z,1510160601.074 [NAL9602](ERROR): Data Fault
2017-11-08T17:03:21.092Z,1510160601.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:21.128Z,1510160601.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T17:03:21.129Z,1510160601.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:21.216Z,1510160601.216 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T17:03:21.474Z,1510160601.474 [NAL9602](INFO): Powering down
2017-11-08T17:03:21.493Z,1510160601.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:21.521Z,1510160601.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2017-11-08T17:03:21.522Z,1510160601.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:21.887Z,1510160601.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:21.943Z,1510160601.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:22.294Z,1510160602.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:22.310Z,1510160602.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:22.405Z,1510160602.405 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T17:03:22.405Z,1510160602.405 [NAL9602] No Fault, FailCount= 1
2017-11-08T17:03:22.690Z,1510160602.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:22.718Z,1510160602.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:23.093Z,1510160603.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:23.115Z,1510160603.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:23.493Z,1510160603.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:23.566Z,1510160603.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:23.897Z,1510160603.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:23.913Z,1510160603.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:24.293Z,1510160604.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:24.309Z,1510160604.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:24.697Z,1510160604.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:24.755Z,1510160604.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:25.097Z,1510160605.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:25.113Z,1510160605.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:25.493Z,1510160605.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:25.532Z,1510160605.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:25.897Z,1510160605.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:25.913Z,1510160605.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:26.295Z,1510160606.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:26.329Z,1510160606.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:26.693Z,1510160606.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:26.708Z,1510160606.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:27.093Z,1510160607.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:27.109Z,1510160607.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:27.495Z,1510160607.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:27.515Z,1510160607.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:27.893Z,1510160607.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:27.915Z,1510160607.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:28.293Z,1510160608.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:28.309Z,1510160608.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:28.697Z,1510160608.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:28.713Z,1510160608.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:29.093Z,1510160609.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:29.108Z,1510160609.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:29.497Z,1510160609.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:29.513Z,1510160609.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:29.895Z,1510160609.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:29.915Z,1510160609.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:30.293Z,1510160610.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:30.308Z,1510160610.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:30.692Z,1510160610.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:30.709Z,1510160610.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:31.097Z,1510160611.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:31.113Z,1510160611.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:31.493Z,1510160611.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:31.508Z,1510160611.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:31.893Z,1510160611.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:31.909Z,1510160611.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:32.297Z,1510160612.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:32.313Z,1510160612.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:32.693Z,1510160612.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:32.708Z,1510160612.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:33.093Z,1510160613.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:33.109Z,1510160613.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:33.491Z,1510160613.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:33.511Z,1510160613.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:33.893Z,1510160613.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:33.945Z,1510160613.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:34.293Z,1510160614.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:34.309Z,1510160614.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:34.313Z,1510160614.313 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T16:58:34.3Z
2017-11-08T17:03:34.313Z,1510160614.313 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T17:03:34.313Z,1510160614.313 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T17:03:34.701Z,1510160614.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:34.723Z,1510160614.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:38.044Z,1510160618.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:38.060Z,1510160618.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:38.160Z,1510160618.160 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171108T132236/Courier0036.lzma
2017-11-08T17:03:38.209Z,1510160618.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:38.248Z,1510160618.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:38.583Z,1510160618.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:38.610Z,1510160618.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:38.957Z,1510160618.957 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0036.lzma.bak
2017-11-08T17:03:38.957Z,1510160618.957 [DataOverHttps](INFO): SBD MOMSN=5223048
2017-11-08T17:03:39.004Z,1510160619.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:39.020Z,1510160619.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:39.911Z,1510160619.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:39.928Z,1510160619.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:40.067Z,1510160620.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:40.084Z,1510160620.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:43.164Z,1510160623.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:43.181Z,1510160623.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:43.319Z,1510160623.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:43.360Z,1510160623.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:43.713Z,1510160623.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:43.729Z,1510160623.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:44.116Z,1510160624.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:44.167Z,1510160624.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:44.515Z,1510160624.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:44.545Z,1510160624.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:44.911Z,1510160624.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:44.939Z,1510160624.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:47.996Z,1510160627.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:48.055Z,1510160628.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:48.153Z,1510160628.153 [DataOverHttps](INFO): Sending 219 bytes from file Logs/20171108T132236/Express0037.lzma
2017-11-08T17:03:48.191Z,1510160628.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:48.208Z,1510160628.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:48.585Z,1510160628.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:48.632Z,1510160628.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:48.953Z,1510160628.953 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0037.lzma.bak
2017-11-08T17:03:48.953Z,1510160628.953 [DataOverHttps](INFO): SBD MOMSN=5223050
2017-11-08T17:03:48.993Z,1510160628.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:49.009Z,1510160629.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:49.896Z,1510160629.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:49.951Z,1510160629.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:49.954Z,1510160629.954 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T17:03:49.954Z,1510160629.954 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T17:03:49.954Z,1510160629.954 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T17:03:50.059Z,1510160630.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:50.094Z,1510160630.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:53.119Z,1510160633.119 [NAL9602](INFO): Powering up NAL9602
2017-11-08T17:03:53.145Z,1510160633.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:53.161Z,1510160633.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:53.288Z,1510160633.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:53.305Z,1510160633.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:53.690Z,1510160633.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:53.706Z,1510160633.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:54.090Z,1510160634.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:54.106Z,1510160634.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:54.489Z,1510160634.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:54.505Z,1510160634.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:54.889Z,1510160634.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:54.904Z,1510160634.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:55.287Z,1510160635.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:55.307Z,1510160635.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:55.684Z,1510160635.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:55.701Z,1510160635.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:56.088Z,1510160636.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:56.104Z,1510160636.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:56.489Z,1510160636.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:56.505Z,1510160636.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:56.885Z,1510160636.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:56.901Z,1510160636.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:57.289Z,1510160637.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:57.311Z,1510160637.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:57.689Z,1510160637.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:57.705Z,1510160637.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:58.085Z,1510160638.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:58.141Z,1510160638.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:58.489Z,1510160638.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:58.504Z,1510160638.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:58.889Z,1510160638.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:58.906Z,1510160638.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:59.289Z,1510160639.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:59.305Z,1510160639.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:03:59.693Z,1510160639.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:03:59.709Z,1510160639.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:00.090Z,1510160640.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:00.106Z,1510160640.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:00.485Z,1510160640.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:00.501Z,1510160640.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:00.889Z,1510160640.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:00.904Z,1510160640.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:01.290Z,1510160641.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:01.306Z,1510160641.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:01.685Z,1510160641.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:01.701Z,1510160641.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:02.089Z,1510160642.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:02.111Z,1510160642.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:02.489Z,1510160642.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:02.505Z,1510160642.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:02.889Z,1510160642.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:02.905Z,1510160642.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:03.290Z,1510160643.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:03.306Z,1510160643.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:03.737Z,1510160643.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:03.756Z,1510160643.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:04.062Z,1510160644.062 [NAL9602](INFO): NAL9602 initialized
2017-11-08T17:04:04.087Z,1510160644.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:04.275Z,1510160644.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:04.518Z,1510160644.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:04.637Z,1510160644.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:04.899Z,1510160644.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:05.061Z,1510160645.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:05.299Z,1510160645.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:05.315Z,1510160645.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:05.695Z,1510160645.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:05.715Z,1510160645.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:06.085Z,1510160646.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:06.108Z,1510160646.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:06.490Z,1510160646.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:06.507Z,1510160646.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:06.898Z,1510160646.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:06.919Z,1510160646.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:07.301Z,1510160647.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:07.317Z,1510160647.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:07.700Z,1510160647.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:07.716Z,1510160647.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:08.091Z,1510160648.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:08.107Z,1510160648.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:08.487Z,1510160648.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:08.512Z,1510160648.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:08.885Z,1510160648.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:08.936Z,1510160648.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:09.283Z,1510160649.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:09.307Z,1510160649.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:09.691Z,1510160649.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:09.707Z,1510160649.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:10.099Z,1510160650.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:10.167Z,1510160650.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:10.503Z,1510160650.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:10.520Z,1510160650.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:10.901Z,1510160650.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:10.918Z,1510160650.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:11.279Z,1510160651.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:11.338Z,1510160651.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:11.687Z,1510160651.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:11.710Z,1510160651.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:12.080Z,1510160652.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:12.133Z,1510160652.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:12.479Z,1510160652.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:12.515Z,1510160652.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:12.899Z,1510160652.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:12.916Z,1510160652.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:13.300Z,1510160653.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:13.316Z,1510160653.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:13.699Z,1510160653.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:13.716Z,1510160653.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:14.087Z,1510160654.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:14.116Z,1510160654.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:14.479Z,1510160654.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:14.514Z,1510160654.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:14.879Z,1510160654.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:14.913Z,1510160654.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:15.284Z,1510160655.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:15.312Z,1510160655.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:15.683Z,1510160655.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:15.709Z,1510160655.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:16.098Z,1510160656.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:16.129Z,1510160656.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:16.504Z,1510160656.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:16.520Z,1510160656.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:16.900Z,1510160656.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:16.916Z,1510160656.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:17.279Z,1510160657.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:17.313Z,1510160657.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:17.683Z,1510160657.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:17.714Z,1510160657.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:18.080Z,1510160658.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:18.112Z,1510160658.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:18.479Z,1510160658.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:18.512Z,1510160658.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:18.900Z,1510160658.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:18.916Z,1510160658.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:19.299Z,1510160659.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:19.315Z,1510160659.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:19.700Z,1510160659.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:19.716Z,1510160659.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:20.083Z,1510160660.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:20.114Z,1510160660.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:20.479Z,1510160660.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:20.533Z,1510160660.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:20.879Z,1510160660.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:20.904Z,1510160660.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:21.284Z,1510160661.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:21.316Z,1510160661.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:21.679Z,1510160661.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:21.704Z,1510160661.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:22.100Z,1510160662.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:22.116Z,1510160662.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:22.503Z,1510160662.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:22.519Z,1510160662.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:22.900Z,1510160662.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:22.923Z,1510160662.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:23.280Z,1510160663.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:23.307Z,1510160663.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:23.683Z,1510160663.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:23.718Z,1510160663.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:24.080Z,1510160664.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:24.105Z,1510160664.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:24.479Z,1510160664.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:24.513Z,1510160664.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:24.900Z,1510160664.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:24.916Z,1510160664.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:25.300Z,1510160665.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:25.316Z,1510160665.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:25.704Z,1510160665.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:25.720Z,1510160665.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:26.083Z,1510160666.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:26.118Z,1510160666.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:26.479Z,1510160666.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:26.511Z,1510160666.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:26.883Z,1510160666.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:26.920Z,1510160666.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:27.284Z,1510160667.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:27.318Z,1510160667.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:27.679Z,1510160667.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:27.714Z,1510160667.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:28.103Z,1510160668.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:28.127Z,1510160668.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:28.503Z,1510160668.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:28.519Z,1510160668.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:28.899Z,1510160668.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:28.915Z,1510160668.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:29.284Z,1510160669.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:29.310Z,1510160669.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:29.683Z,1510160669.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:29.715Z,1510160669.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:30.080Z,1510160670.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:30.105Z,1510160670.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:30.483Z,1510160670.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:30.516Z,1510160670.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:30.900Z,1510160670.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:30.916Z,1510160670.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:31.299Z,1510160671.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:31.363Z,1510160671.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:31.704Z,1510160671.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:31.767Z,1510160671.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:32.083Z,1510160672.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:32.116Z,1510160672.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:32.479Z,1510160672.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:32.531Z,1510160672.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:32.884Z,1510160672.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:32.916Z,1510160672.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:33.284Z,1510160673.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:33.339Z,1510160673.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:33.679Z,1510160673.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:33.695Z,1510160673.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:34.098Z,1510160674.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:34.127Z,1510160674.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:34.498Z,1510160674.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:34.531Z,1510160674.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:34.892Z,1510160674.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:34.922Z,1510160674.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:35.283Z,1510160675.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:35.300Z,1510160675.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:35.683Z,1510160675.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:35.700Z,1510160675.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:36.080Z,1510160676.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:36.096Z,1510160676.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:36.483Z,1510160676.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:36.500Z,1510160676.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:36.894Z,1510160676.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:36.919Z,1510160676.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:37.297Z,1510160677.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:37.322Z,1510160677.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:37.698Z,1510160677.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:37.727Z,1510160677.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:38.087Z,1510160678.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:38.122Z,1510160678.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:38.480Z,1510160678.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:38.496Z,1510160678.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:38.884Z,1510160678.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:38.900Z,1510160678.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:39.284Z,1510160679.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:39.309Z,1510160679.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:39.680Z,1510160679.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:39.695Z,1510160679.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:40.098Z,1510160680.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:40.127Z,1510160680.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:40.498Z,1510160680.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:40.523Z,1510160680.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:40.894Z,1510160680.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:40.926Z,1510160680.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:41.283Z,1510160681.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:41.300Z,1510160681.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:41.683Z,1510160681.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:41.740Z,1510160681.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:42.080Z,1510160682.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:42.096Z,1510160682.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:42.483Z,1510160682.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:42.500Z,1510160682.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:42.894Z,1510160682.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:42.927Z,1510160682.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:43.297Z,1510160683.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:43.328Z,1510160683.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:43.698Z,1510160683.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:43.723Z,1510160683.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:44.083Z,1510160684.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:44.100Z,1510160684.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:44.483Z,1510160684.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:44.499Z,1510160684.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:44.896Z,1510160684.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:44.924Z,1510160684.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:45.288Z,1510160685.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:45.305Z,1510160685.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:45.687Z,1510160685.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:45.703Z,1510160685.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:46.094Z,1510160686.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:46.123Z,1510160686.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:46.498Z,1510160686.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:46.530Z,1510160686.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:46.897Z,1510160686.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:46.914Z,1510160686.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:47.286Z,1510160687.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:47.303Z,1510160687.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:47.690Z,1510160687.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:47.707Z,1510160687.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:48.088Z,1510160688.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:48.104Z,1510160688.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:48.486Z,1510160688.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:48.507Z,1510160688.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:48.898Z,1510160688.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:48.914Z,1510160688.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:49.297Z,1510160689.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:49.313Z,1510160689.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:49.695Z,1510160689.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:49.711Z,1510160689.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:50.091Z,1510160690.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:50.108Z,1510160690.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:50.489Z,1510160690.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:50.511Z,1510160690.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:53.589Z,1510160693.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:53.676Z,1510160693.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:53.804Z,1510160693.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:53.837Z,1510160693.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:54.216Z,1510160694.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:54.272Z,1510160694.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:54.618Z,1510160694.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:54.642Z,1510160694.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:55.011Z,1510160695.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:55.063Z,1510160695.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:55.399Z,1510160695.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:55.416Z,1510160695.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:55.795Z,1510160695.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:55.812Z,1510160695.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:56.204Z,1510160696.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:56.221Z,1510160696.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:56.599Z,1510160696.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:56.616Z,1510160696.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:57.006Z,1510160697.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:57.023Z,1510160697.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:57.418Z,1510160697.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:57.447Z,1510160697.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:57.813Z,1510160697.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:57.846Z,1510160697.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:58.197Z,1510160698.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:58.219Z,1510160698.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:58.603Z,1510160698.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:58.624Z,1510160698.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:58.000Z,1510160699.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:59.016Z,1510160699.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:59.399Z,1510160699.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:59.415Z,1510160699.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:04:59.814Z,1510160699.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:04:59.847Z,1510160699.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:00.214Z,1510160700.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:00.229Z,1510160700.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:00.614Z,1510160700.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:00.630Z,1510160700.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:01.004Z,1510160701.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:01.020Z,1510160701.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:01.402Z,1510160701.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:01.418Z,1510160701.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:01.798Z,1510160701.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:01.815Z,1510160701.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:02.203Z,1510160702.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:02.220Z,1510160702.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:02.602Z,1510160702.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:02.619Z,1510160702.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:03.006Z,1510160703.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:03.023Z,1510160703.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:03.414Z,1510160703.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:03.475Z,1510160703.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:03.809Z,1510160703.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:03.832Z,1510160703.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:04.203Z,1510160704.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:04.219Z,1510160704.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:04.603Z,1510160704.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:04.619Z,1510160704.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:05.002Z,1510160705.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:05.019Z,1510160705.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:05.403Z,1510160705.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:05.419Z,1510160705.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:05.810Z,1510160705.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:05.827Z,1510160705.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:06.209Z,1510160706.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:06.225Z,1510160706.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:06.610Z,1510160706.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:06.626Z,1510160706.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:07.005Z,1510160707.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:07.021Z,1510160707.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:07.405Z,1510160707.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:07.421Z,1510160707.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:07.798Z,1510160707.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:07.814Z,1510160707.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:08.206Z,1510160708.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:08.222Z,1510160708.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:08.602Z,1510160708.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:08.618Z,1510160708.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:09.007Z,1510160709.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:09.027Z,1510160709.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:09.414Z,1510160709.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:09.430Z,1510160709.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:09.814Z,1510160709.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:09.829Z,1510160709.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:10.205Z,1510160710.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:10.221Z,1510160710.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:10.605Z,1510160710.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:10.621Z,1510160710.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:11.004Z,1510160711.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:11.020Z,1510160711.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:11.405Z,1510160711.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:11.421Z,1510160711.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:11.810Z,1510160711.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:11.827Z,1510160711.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:12.214Z,1510160712.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:12.230Z,1510160712.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:12.610Z,1510160712.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:12.626Z,1510160712.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:13.005Z,1510160713.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:13.021Z,1510160713.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:13.403Z,1510160713.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:13.418Z,1510160713.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:13.802Z,1510160713.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:13.818Z,1510160713.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:14.206Z,1510160714.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:14.222Z,1510160714.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:14.602Z,1510160714.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:14.695Z,1510160714.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:15.011Z,1510160715.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:15.031Z,1510160715.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:15.414Z,1510160715.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:15.463Z,1510160715.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:15.814Z,1510160715.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:15.829Z,1510160715.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:16.198Z,1510160716.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:16.257Z,1510160716.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:16.606Z,1510160716.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:16.622Z,1510160716.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:17.007Z,1510160717.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:17.023Z,1510160717.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:17.405Z,1510160717.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:17.427Z,1510160717.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:17.810Z,1510160717.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:17.831Z,1510160717.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:18.213Z,1510160718.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:18.229Z,1510160718.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:18.611Z,1510160718.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:18.631Z,1510160718.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:19.006Z,1510160719.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:19.022Z,1510160719.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:19.406Z,1510160719.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:19.422Z,1510160719.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:19.798Z,1510160719.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:19.818Z,1510160719.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:20.206Z,1510160720.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:20.222Z,1510160720.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:20.602Z,1510160720.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:20.618Z,1510160720.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:21.010Z,1510160721.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:21.027Z,1510160721.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:21.414Z,1510160721.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:21.430Z,1510160721.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:21.814Z,1510160721.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:21.829Z,1510160721.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:22.198Z,1510160722.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:22.215Z,1510160722.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:22.605Z,1510160722.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:22.622Z,1510160722.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:23.003Z,1510160723.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:23.019Z,1510160723.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:23.406Z,1510160723.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:23.422Z,1510160723.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:23.811Z,1510160723.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:23.831Z,1510160723.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:24.213Z,1510160724.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:24.229Z,1510160724.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:24.611Z,1510160724.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:24.663Z,1510160724.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:25.005Z,1510160725.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:25.027Z,1510160725.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:25.406Z,1510160725.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:25.422Z,1510160725.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:25.806Z,1510160725.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:25.827Z,1510160725.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:26.207Z,1510160726.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:26.228Z,1510160726.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:26.607Z,1510160726.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:26.622Z,1510160726.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:27.012Z,1510160727.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:27.028Z,1510160727.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:27.414Z,1510160727.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:27.430Z,1510160727.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:27.812Z,1510160727.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:27.827Z,1510160727.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:28.195Z,1510160728.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:28.229Z,1510160728.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:28.599Z,1510160728.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:28.628Z,1510160728.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:28.996Z,1510160728.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:29.022Z,1510160729.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:29.406Z,1510160729.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:29.423Z,1510160729.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:29.816Z,1510160729.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:29.832Z,1510160729.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:30.217Z,1510160730.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:30.233Z,1510160730.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:30.618Z,1510160730.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:30.634Z,1510160730.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:31.007Z,1510160731.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:31.024Z,1510160731.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:31.407Z,1510160731.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:31.423Z,1510160731.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:31.806Z,1510160731.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:31.828Z,1510160731.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:32.205Z,1510160732.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:32.222Z,1510160732.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:32.596Z,1510160732.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:32.622Z,1510160732.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:33.017Z,1510160733.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:33.034Z,1510160733.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:33.419Z,1510160733.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:33.436Z,1510160733.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:33.820Z,1510160733.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:33.843Z,1510160733.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:34.207Z,1510160734.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:34.224Z,1510160734.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:34.595Z,1510160734.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:34.622Z,1510160734.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:35.008Z,1510160735.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:35.048Z,1510160735.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:35.399Z,1510160735.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:35.427Z,1510160735.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:35.817Z,1510160735.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:35.834Z,1510160735.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:36.222Z,1510160736.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:36.243Z,1510160736.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:36.617Z,1510160736.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:36.684Z,1510160736.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:36.999Z,1510160736.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:37.032Z,1510160737.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:37.399Z,1510160737.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:37.448Z,1510160737.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:37.796Z,1510160737.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:37.827Z,1510160737.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:38.197Z,1510160738.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:38.268Z,1510160738.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:38.599Z,1510160738.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:38.626Z,1510160738.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:39.010Z,1510160739.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:39.032Z,1510160739.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:39.421Z,1510160739.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:39.437Z,1510160739.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:39.818Z,1510160739.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:39.833Z,1510160739.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:40.195Z,1510160740.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:40.230Z,1510160740.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:40.599Z,1510160740.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:40.631Z,1510160740.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:41.001Z,1510160741.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:41.027Z,1510160741.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:41.399Z,1510160741.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:41.428Z,1510160741.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:41.816Z,1510160741.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:41.833Z,1510160741.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:42.216Z,1510160742.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:42.233Z,1510160742.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:42.616Z,1510160742.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:42.640Z,1510160742.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:42.999Z,1510160742.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:43.028Z,1510160743.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:43.395Z,1510160743.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:43.423Z,1510160743.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:43.792Z,1510160743.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:43.808Z,1510160743.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:44.200Z,1510160744.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:44.232Z,1510160744.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:44.599Z,1510160744.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:44.615Z,1510160744.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:45.005Z,1510160745.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:45.041Z,1510160745.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:45.414Z,1510160745.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:45.439Z,1510160745.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:45.809Z,1510160745.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:45.843Z,1510160745.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:46.193Z,1510160746.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:46.209Z,1510160746.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:46.595Z,1510160746.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:46.651Z,1510160746.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:46.000Z,1510160747.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:47.016Z,1510160747.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:47.399Z,1510160747.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:47.420Z,1510160747.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:47.810Z,1510160747.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:47.842Z,1510160747.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:48.213Z,1510160748.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:48.248Z,1510160748.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:48.614Z,1510160748.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:48.647Z,1510160748.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:49.003Z,1510160749.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:49.019Z,1510160749.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:49.402Z,1510160749.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:49.417Z,1510160749.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:49.798Z,1510160749.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:49.814Z,1510160749.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:50.203Z,1510160750.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:50.223Z,1510160750.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:50.602Z,1510160750.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:50.618Z,1510160750.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:51.006Z,1510160751.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:51.022Z,1510160751.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:51.414Z,1510160751.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:51.430Z,1510160751.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:51.813Z,1510160751.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:51.855Z,1510160751.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:52.198Z,1510160752.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:52.215Z,1510160752.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:52.603Z,1510160752.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:52.619Z,1510160752.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:53.002Z,1510160753.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:53.018Z,1510160753.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:53.403Z,1510160753.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:53.419Z,1510160753.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:53.814Z,1510160753.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:53.830Z,1510160753.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:56.924Z,1510160756.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:56.954Z,1510160756.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:57.096Z,1510160757.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:57.131Z,1510160757.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:57.471Z,1510160757.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:57.528Z,1510160757.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:57.875Z,1510160757.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:57.912Z,1510160757.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:58.271Z,1510160758.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:58.312Z,1510160758.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:58.671Z,1510160758.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:58.731Z,1510160758.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:59.089Z,1510160759.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:59.117Z,1510160759.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:59.489Z,1510160759.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:59.516Z,1510160759.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:05:59.886Z,1510160759.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:05:59.936Z,1510160759.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:00.275Z,1510160760.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:00.291Z,1510160760.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:00.668Z,1510160760.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:00.727Z,1510160760.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:01.076Z,1510160761.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:01.092Z,1510160761.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:01.471Z,1510160761.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:01.487Z,1510160761.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:01.882Z,1510160761.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:01.914Z,1510160761.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:02.285Z,1510160762.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:02.318Z,1510160762.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:02.686Z,1510160762.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:02.727Z,1510160762.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:02.727Z,1510160762.727 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74
2017-11-08T17:06:02.727Z,1510160762.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T17:06:02.729Z,1510160762.729 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:02.729Z,1510160762.729 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74
2017-11-08T17:06:02.729Z,1510160762.729 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T17:06:02.731Z,1510160762.731 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:02.731Z,1510160762.731 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 74
2017-11-08T17:06:02.731Z,1510160762.731 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T17:06:02.819Z,1510160762.819 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T17:06:02.819Z,1510160762.819 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T17:06:02.819Z,1510160762.819 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T17:06:03.073Z,1510160763.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:03.165Z,1510160763.165 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T17:06:03.165Z,1510160763.165 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74
2017-11-08T17:06:03.165Z,1510160763.165 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T17:06:03.165Z,1510160763.165 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74
2017-11-08T17:06:03.166Z,1510160763.166 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T17:06:03.166Z,1510160763.166 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 74
2017-11-08T17:06:03.470Z,1510160763.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:03.497Z,1510160763.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T17:06:03.498Z,1510160763.498 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:06:03.498Z,1510160763.498 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:06:03.498Z,1510160763.498 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T17:06:03.499Z,1510160763.499 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:06:03.499Z,1510160763.499 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:06:03.499Z,1510160763.499 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T17:06:03.500Z,1510160763.500 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:06:03.500Z,1510160763.500 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:06:03.878Z,1510160763.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:03.893Z,1510160763.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T17:06:03.894Z,1510160763.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:04.270Z,1510160764.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:04.298Z,1510160764.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T17:06:04.299Z,1510160764.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:04.675Z,1510160764.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:04.695Z,1510160764.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T17:06:04.696Z,1510160764.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:05.087Z,1510160765.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:05.107Z,1510160765.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T17:06:05.108Z,1510160765.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:05.486Z,1510160765.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:05.507Z,1510160765.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T17:06:05.508Z,1510160765.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:05.887Z,1510160765.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:05.907Z,1510160765.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T17:06:05.908Z,1510160765.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:06.278Z,1510160766.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:06.294Z,1510160766.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T17:06:06.295Z,1510160766.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:06.670Z,1510160766.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:06.699Z,1510160766.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T17:06:06.701Z,1510160766.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:07.075Z,1510160767.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:07.104Z,1510160767.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T17:06:07.105Z,1510160767.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:07.478Z,1510160767.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:07.494Z,1510160767.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T17:06:07.494Z,1510160767.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:07.883Z,1510160767.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:07.899Z,1510160767.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T17:06:07.900Z,1510160767.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:08.286Z,1510160768.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:08.307Z,1510160768.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T17:06:08.308Z,1510160768.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:08.687Z,1510160768.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:08.707Z,1510160768.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T17:06:08.708Z,1510160768.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:09.067Z,1510160769.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:09.130Z,1510160769.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T17:06:09.131Z,1510160769.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:09.475Z,1510160769.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:09.496Z,1510160769.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T17:06:09.497Z,1510160769.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:09.878Z,1510160769.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:09.897Z,1510160769.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T17:06:09.898Z,1510160769.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:10.278Z,1510160770.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:10.294Z,1510160770.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T17:06:10.294Z,1510160770.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:10.675Z,1510160770.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:10.695Z,1510160770.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T17:06:10.697Z,1510160770.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:11.091Z,1510160771.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:11.107Z,1510160771.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T17:06:11.108Z,1510160771.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:11.490Z,1510160771.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:11.511Z,1510160771.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T17:06:11.512Z,1510160771.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:11.613Z,1510160771.613 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:06:11.613Z,1510160771.613 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T17:06:11.705Z,1510160771.705 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:06:11.705Z,1510160771.705 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:06:11.705Z,1510160771.705 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:06:11.705Z,1510160771.705 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T17:06:11.705Z,1510160771.705 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:06:11.882Z,1510160771.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:11.902Z,1510160771.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T17:06:11.903Z,1510160771.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:11.981Z,1510160771.981 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:06:12.109Z,1510160772.109 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:06:12.196Z,1510160772.196 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:06:12.278Z,1510160772.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:12.301Z,1510160772.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T17:06:12.302Z,1510160772.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:12.678Z,1510160772.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:12.694Z,1510160772.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T17:06:12.695Z,1510160772.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:13.078Z,1510160773.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:13.099Z,1510160773.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T17:06:13.101Z,1510160773.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:13.468Z,1510160773.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:13.494Z,1510160773.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T17:06:13.495Z,1510160773.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:13.572Z,1510160773.572 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:06:13.573Z,1510160773.573 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T17:06:13.813Z,1510160773.813 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:06:13.813Z,1510160773.813 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:06:13.813Z,1510160773.813 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:06:13.813Z,1510160773.813 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T17:06:13.813Z,1510160773.813 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:06:13.888Z,1510160773.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:13.904Z,1510160773.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T17:06:13.905Z,1510160773.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:13.985Z,1510160773.985 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:06:14.219Z,1510160774.219 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:06:14.299Z,1510160774.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:14.337Z,1510160774.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T17:06:14.338Z,1510160774.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:14.422Z,1510160774.422 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:06:14.690Z,1510160774.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:14.718Z,1510160774.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T17:06:14.719Z,1510160774.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:15.072Z,1510160775.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:15.102Z,1510160775.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T17:06:15.103Z,1510160775.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:15.472Z,1510160775.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:15.502Z,1510160775.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T17:06:15.503Z,1510160775.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:15.872Z,1510160775.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:15.903Z,1510160775.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T17:06:15.904Z,1510160775.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:15.985Z,1510160775.985 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:06:15.985Z,1510160775.985 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T17:06:16.037Z,1510160776.037 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:06:16.038Z,1510160776.038 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:06:16.038Z,1510160776.038 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:06:16.038Z,1510160776.038 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T17:06:16.038Z,1510160776.038 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:06:16.268Z,1510160776.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:16.302Z,1510160776.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T17:06:16.303Z,1510160776.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:16.384Z,1510160776.384 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:06:16.441Z,1510160776.441 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:06:16.525Z,1510160776.525 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:06:16.680Z,1510160776.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:16.708Z,1510160776.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T17:06:16.710Z,1510160776.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:17.094Z,1510160777.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:17.110Z,1510160777.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T17:06:17.111Z,1510160777.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:17.493Z,1510160777.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:17.509Z,1510160777.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T17:06:17.510Z,1510160777.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:17.889Z,1510160777.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:17.906Z,1510160777.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T17:06:17.907Z,1510160777.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:17.986Z,1510160777.986 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:06:17.986Z,1510160777.986 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T17:06:18.141Z,1510160778.141 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:06:18.141Z,1510160778.141 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:06:18.141Z,1510160778.141 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:06:18.141Z,1510160778.141 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T17:06:18.142Z,1510160778.142 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:06:18.268Z,1510160778.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:18.301Z,1510160778.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T17:06:18.302Z,1510160778.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:18.390Z,1510160778.390 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:06:18.545Z,1510160778.545 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:06:18.627Z,1510160778.627 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:06:18.675Z,1510160778.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:18.709Z,1510160778.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T17:06:18.710Z,1510160778.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:19.073Z,1510160779.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:19.097Z,1510160779.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T17:06:19.098Z,1510160779.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:19.472Z,1510160779.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:19.505Z,1510160779.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T17:06:19.506Z,1510160779.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:19.886Z,1510160779.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:19.935Z,1510160779.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T17:06:19.937Z,1510160779.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:20.041Z,1510160780.041 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:06:20.041Z,1510160780.041 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T17:06:20.241Z,1510160780.241 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:06:20.241Z,1510160780.241 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:06:20.242Z,1510160780.242 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:06:20.242Z,1510160780.242 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T17:06:20.242Z,1510160780.242 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:06:20.287Z,1510160780.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:20.311Z,1510160780.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T17:06:20.312Z,1510160780.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:20.397Z,1510160780.397 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:06:20.397Z,1510160780.397 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:06:20.657Z,1510160780.657 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:06:20.715Z,1510160780.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:20.747Z,1510160780.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T17:06:20.769Z,1510160780.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:20.861Z,1510160780.861 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:06:21.079Z,1510160781.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:21.146Z,1510160781.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T17:06:21.147Z,1510160781.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:21.476Z,1510160781.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:21.494Z,1510160781.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T17:06:21.495Z,1510160781.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:21.874Z,1510160781.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:21.891Z,1510160781.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T17:06:21.892Z,1510160781.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:22.279Z,1510160782.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:22.295Z,1510160782.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T17:06:22.297Z,1510160782.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:22.675Z,1510160782.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:22.728Z,1510160782.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:23.086Z,1510160783.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:23.103Z,1510160783.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:23.486Z,1510160783.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:23.535Z,1510160783.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:23.886Z,1510160783.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:23.902Z,1510160783.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:24.279Z,1510160784.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:24.295Z,1510160784.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:24.675Z,1510160784.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:24.691Z,1510160784.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:25.079Z,1510160785.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:25.100Z,1510160785.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:25.475Z,1510160785.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:25.491Z,1510160785.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:25.886Z,1510160785.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:25.908Z,1510160785.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:26.286Z,1510160786.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:26.303Z,1510160786.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:26.686Z,1510160786.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:26.702Z,1510160786.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:27.070Z,1510160787.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:27.100Z,1510160787.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:27.471Z,1510160787.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:27.493Z,1510160787.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:27.874Z,1510160787.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:27.890Z,1510160787.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:28.278Z,1510160788.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:28.295Z,1510160788.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:28.674Z,1510160788.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:28.702Z,1510160788.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:29.088Z,1510160789.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:29.105Z,1510160789.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:29.486Z,1510160789.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:29.509Z,1510160789.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:29.887Z,1510160789.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:29.904Z,1510160789.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:30.278Z,1510160790.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:30.294Z,1510160790.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:30.677Z,1510160790.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:30.694Z,1510160790.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:31.078Z,1510160791.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:31.094Z,1510160791.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:31.478Z,1510160791.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:31.494Z,1510160791.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:31.888Z,1510160791.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:31.941Z,1510160791.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:32.290Z,1510160792.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:32.306Z,1510160792.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:32.688Z,1510160792.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:32.711Z,1510160792.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:33.067Z,1510160793.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:33.100Z,1510160793.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:33.471Z,1510160793.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:33.506Z,1510160793.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:33.867Z,1510160793.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:33.893Z,1510160793.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:34.272Z,1510160794.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:34.304Z,1510160794.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:34.671Z,1510160794.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:34.702Z,1510160794.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:35.087Z,1510160795.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:35.103Z,1510160795.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:35.491Z,1510160795.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:35.507Z,1510160795.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:35.887Z,1510160795.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:35.903Z,1510160795.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:36.267Z,1510160796.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:36.301Z,1510160796.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:36.671Z,1510160796.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:36.704Z,1510160796.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:37.072Z,1510160797.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:37.105Z,1510160797.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:37.467Z,1510160797.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:37.499Z,1510160797.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:37.891Z,1510160797.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:37.908Z,1510160797.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:38.291Z,1510160798.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:38.307Z,1510160798.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:38.692Z,1510160798.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:38.711Z,1510160798.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:39.071Z,1510160799.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:39.108Z,1510160799.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:39.471Z,1510160799.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:39.505Z,1510160799.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:39.867Z,1510160799.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:39.893Z,1510160799.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:40.271Z,1510160800.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:40.302Z,1510160800.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:40.671Z,1510160800.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:40.706Z,1510160800.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:41.088Z,1510160801.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:41.104Z,1510160801.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:41.494Z,1510160801.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:41.516Z,1510160801.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:41.891Z,1510160801.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:41.908Z,1510160801.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:42.271Z,1510160802.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:42.327Z,1510160802.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:42.672Z,1510160802.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:42.704Z,1510160802.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:43.072Z,1510160803.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:43.088Z,1510160803.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:43.471Z,1510160803.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:43.487Z,1510160803.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:43.886Z,1510160803.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:43.939Z,1510160803.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:44.285Z,1510160804.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:44.311Z,1510160804.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:44.689Z,1510160804.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:44.714Z,1510160804.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:45.073Z,1510160805.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:45.120Z,1510160805.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:45.472Z,1510160805.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:45.503Z,1510160805.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:45.874Z,1510160805.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:45.916Z,1510160805.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:46.275Z,1510160806.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:46.296Z,1510160806.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:46.674Z,1510160806.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:46.690Z,1510160806.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:47.081Z,1510160807.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:47.118Z,1510160807.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:47.485Z,1510160807.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:47.515Z,1510160807.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:47.886Z,1510160807.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:47.916Z,1510160807.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:48.274Z,1510160808.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:48.289Z,1510160808.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:48.730Z,1510160808.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:48.747Z,1510160808.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:49.075Z,1510160809.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:49.095Z,1510160809.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:49.474Z,1510160809.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:49.490Z,1510160809.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:49.886Z,1510160809.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:49.918Z,1510160809.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:50.289Z,1510160810.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:50.321Z,1510160810.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:50.689Z,1510160810.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:50.705Z,1510160810.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:53.765Z,1510160813.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:53.788Z,1510160813.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:53.899Z,1510160813.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:53.966Z,1510160813.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:54.321Z,1510160814.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:54.337Z,1510160814.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:54.720Z,1510160814.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:54.736Z,1510160814.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:55.106Z,1510160815.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:55.131Z,1510160815.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:55.495Z,1510160815.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:55.523Z,1510160815.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:55.900Z,1510160815.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:55.935Z,1510160815.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:56.296Z,1510160816.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:56.312Z,1510160816.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:56.705Z,1510160816.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:56.738Z,1510160816.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:57.109Z,1510160817.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:57.137Z,1510160817.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:57.506Z,1510160817.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:57.538Z,1510160817.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:57.900Z,1510160817.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:57.916Z,1510160817.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:58.296Z,1510160818.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:58.313Z,1510160818.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:58.714Z,1510160818.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:58.740Z,1510160818.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:59.113Z,1510160819.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:59.160Z,1510160819.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:59.510Z,1510160819.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:59.543Z,1510160819.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:06:59.900Z,1510160819.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:06:59.917Z,1510160819.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:00.294Z,1510160820.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:00.315Z,1510160820.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:00.706Z,1510160820.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:00.741Z,1510160820.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:01.110Z,1510160821.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:01.142Z,1510160821.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:01.510Z,1510160821.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:01.543Z,1510160821.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:01.895Z,1510160821.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:01.916Z,1510160821.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:02.298Z,1510160822.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:02.315Z,1510160822.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:02.709Z,1510160822.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:02.743Z,1510160822.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:03.110Z,1510160823.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:03.142Z,1510160823.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:03.510Z,1510160823.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:03.541Z,1510160823.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:03.899Z,1510160823.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:03.915Z,1510160823.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:04.299Z,1510160824.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:04.315Z,1510160824.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:04.710Z,1510160824.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:04.740Z,1510160824.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:05.109Z,1510160825.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:05.141Z,1510160825.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:05.510Z,1510160825.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:05.540Z,1510160825.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:05.900Z,1510160825.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:05.963Z,1510160825.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:06.298Z,1510160826.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:06.314Z,1510160826.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:06.710Z,1510160826.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:06.743Z,1510160826.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:07.109Z,1510160827.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:07.156Z,1510160827.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:07.510Z,1510160827.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:07.526Z,1510160827.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:07.897Z,1510160827.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:07.955Z,1510160827.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:08.298Z,1510160828.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:08.315Z,1510160828.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:08.710Z,1510160828.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:08.726Z,1510160828.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:09.106Z,1510160829.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:09.127Z,1510160829.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:09.509Z,1510160829.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:09.551Z,1510160829.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:09.898Z,1510160829.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:09.914Z,1510160829.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:10.297Z,1510160830.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:10.313Z,1510160830.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:10.709Z,1510160830.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:10.726Z,1510160830.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:11.109Z,1510160831.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:11.125Z,1510160831.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:11.506Z,1510160831.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:11.522Z,1510160831.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:11.899Z,1510160831.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:11.919Z,1510160831.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:12.297Z,1510160832.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:12.319Z,1510160832.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:12.702Z,1510160832.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:12.718Z,1510160832.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:13.109Z,1510160833.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:13.125Z,1510160833.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:13.509Z,1510160833.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:13.525Z,1510160833.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:13.899Z,1510160833.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:13.919Z,1510160833.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:14.298Z,1510160834.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:14.314Z,1510160834.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:14.709Z,1510160834.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:14.725Z,1510160834.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:15.105Z,1510160835.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:15.127Z,1510160835.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:15.510Z,1510160835.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:15.526Z,1510160835.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:15.898Z,1510160835.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:15.919Z,1510160835.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:16.296Z,1510160836.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:16.355Z,1510160836.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:16.710Z,1510160836.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:16.726Z,1510160836.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:17.109Z,1510160837.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:17.151Z,1510160837.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:17.506Z,1510160837.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:17.522Z,1510160837.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:17.899Z,1510160837.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:17.919Z,1510160837.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:18.298Z,1510160838.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:18.313Z,1510160838.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:18.706Z,1510160838.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:18.722Z,1510160838.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:19.105Z,1510160839.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:19.122Z,1510160839.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:19.509Z,1510160839.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:19.525Z,1510160839.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:19.896Z,1510160839.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:19.912Z,1510160839.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:20.299Z,1510160840.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:20.319Z,1510160840.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:20.698Z,1510160840.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:20.719Z,1510160840.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:21.102Z,1510160841.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:21.118Z,1510160841.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:21.509Z,1510160841.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:21.526Z,1510160841.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:21.909Z,1510160841.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:21.925Z,1510160841.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:22.297Z,1510160842.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:22.313Z,1510160842.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:22.698Z,1510160842.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:22.715Z,1510160842.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:23.098Z,1510160843.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:23.119Z,1510160843.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:23.498Z,1510160843.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:23.515Z,1510160843.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:23.910Z,1510160843.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:23.926Z,1510160843.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:24.309Z,1510160844.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:24.351Z,1510160844.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:24.706Z,1510160844.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:24.723Z,1510160844.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:25.098Z,1510160845.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:25.115Z,1510160845.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:25.496Z,1510160845.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:25.519Z,1510160845.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:25.899Z,1510160845.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:25.920Z,1510160845.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:26.298Z,1510160846.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:26.315Z,1510160846.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:26.709Z,1510160846.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:26.751Z,1510160846.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:27.106Z,1510160847.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:27.122Z,1510160847.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:27.510Z,1510160847.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:27.526Z,1510160847.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:27.898Z,1510160847.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:27.971Z,1510160847.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:28.301Z,1510160848.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:28.371Z,1510160848.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:28.706Z,1510160848.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:28.727Z,1510160848.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:29.106Z,1510160849.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:29.157Z,1510160849.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:29.506Z,1510160849.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:29.527Z,1510160849.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:29.894Z,1510160849.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:29.946Z,1510160849.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:30.302Z,1510160850.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:30.317Z,1510160850.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:30.706Z,1510160850.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:30.722Z,1510160850.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:31.109Z,1510160851.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:31.126Z,1510160851.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:31.507Z,1510160851.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:31.527Z,1510160851.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:31.897Z,1510160851.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:31.913Z,1510160851.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:32.300Z,1510160852.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:32.317Z,1510160852.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:32.709Z,1510160852.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:32.725Z,1510160852.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:33.108Z,1510160853.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:33.124Z,1510160853.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:33.507Z,1510160853.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:33.527Z,1510160853.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:33.903Z,1510160853.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:33.919Z,1510160853.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:34.295Z,1510160854.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:34.326Z,1510160854.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:34.704Z,1510160854.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:34.725Z,1510160854.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:35.111Z,1510160855.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:35.131Z,1510160855.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:35.512Z,1510160855.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:35.528Z,1510160855.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:35.897Z,1510160855.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:35.918Z,1510160855.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:36.299Z,1510160856.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:36.319Z,1510160856.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:36.705Z,1510160856.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:36.736Z,1510160856.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:37.111Z,1510160857.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:37.128Z,1510160857.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:37.512Z,1510160857.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:37.535Z,1510160857.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:37.896Z,1510160857.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:37.920Z,1510160857.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:38.302Z,1510160858.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:38.359Z,1510160858.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:38.712Z,1510160858.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:38.728Z,1510160858.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:39.111Z,1510160859.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:39.131Z,1510160859.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:39.511Z,1510160859.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:39.528Z,1510160859.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:39.901Z,1510160859.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:39.920Z,1510160859.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:40.301Z,1510160860.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:40.318Z,1510160860.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:40.710Z,1510160860.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:40.727Z,1510160860.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:41.110Z,1510160861.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:41.132Z,1510160861.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:41.511Z,1510160861.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:41.532Z,1510160861.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:41.902Z,1510160861.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:41.918Z,1510160861.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:42.302Z,1510160862.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:42.318Z,1510160862.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:42.708Z,1510160862.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:42.724Z,1510160862.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:43.111Z,1510160863.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:43.131Z,1510160863.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:43.511Z,1510160863.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:43.527Z,1510160863.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:43.902Z,1510160863.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:43.924Z,1510160863.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:44.305Z,1510160864.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:44.321Z,1510160864.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:44.711Z,1510160864.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:44.727Z,1510160864.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:45.111Z,1510160865.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:45.131Z,1510160865.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:45.511Z,1510160865.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:45.527Z,1510160865.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:45.899Z,1510160865.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:45.932Z,1510160865.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:46.296Z,1510160866.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:46.317Z,1510160866.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:46.711Z,1510160866.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:46.728Z,1510160866.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:47.112Z,1510160867.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:47.135Z,1510160867.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:47.511Z,1510160867.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:47.528Z,1510160867.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:47.899Z,1510160867.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:47.921Z,1510160867.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:48.302Z,1510160868.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:48.318Z,1510160868.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:48.711Z,1510160868.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:48.729Z,1510160868.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:49.110Z,1510160869.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:49.127Z,1510160869.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:49.511Z,1510160869.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:49.532Z,1510160869.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:49.901Z,1510160869.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:49.917Z,1510160869.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:50.305Z,1510160870.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:50.387Z,1510160870.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:50.715Z,1510160870.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:50.731Z,1510160870.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:53.918Z,1510160873.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:53.968Z,1510160873.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:54.102Z,1510160874.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:54.119Z,1510160874.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:54.481Z,1510160874.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:54.527Z,1510160874.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:54.881Z,1510160874.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:54.910Z,1510160874.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:55.280Z,1510160875.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:55.318Z,1510160875.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:55.680Z,1510160875.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:55.696Z,1510160875.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:56.086Z,1510160876.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:56.124Z,1510160876.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:56.495Z,1510160876.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:56.528Z,1510160876.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:56.890Z,1510160876.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:56.916Z,1510160876.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:57.275Z,1510160877.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:57.296Z,1510160877.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:57.679Z,1510160877.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:57.700Z,1510160877.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:58.084Z,1510160878.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:58.099Z,1510160878.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:58.482Z,1510160878.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:58.499Z,1510160878.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:58.893Z,1510160878.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:58.926Z,1510160878.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:59.293Z,1510160879.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:59.326Z,1510160879.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:07:59.690Z,1510160879.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:07:59.722Z,1510160879.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:00.082Z,1510160880.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:00.103Z,1510160880.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:00.478Z,1510160880.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:00.494Z,1510160880.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:00.879Z,1510160880.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:00.895Z,1510160880.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:01.284Z,1510160881.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:01.307Z,1510160881.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:01.682Z,1510160881.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:01.698Z,1510160881.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:02.086Z,1510160882.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:02.102Z,1510160882.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:02.497Z,1510160882.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:02.530Z,1510160882.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:02.889Z,1510160882.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:02.939Z,1510160882.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:03.285Z,1510160883.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:03.304Z,1510160883.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:03.685Z,1510160883.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:03.701Z,1510160883.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:04.086Z,1510160884.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:04.102Z,1510160884.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:04.485Z,1510160884.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:04.501Z,1510160884.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:04.891Z,1510160884.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:04.907Z,1510160884.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:05.294Z,1510160885.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:05.310Z,1510160885.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:05.686Z,1510160885.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:05.707Z,1510160885.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:06.084Z,1510160886.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:06.101Z,1510160886.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:06.484Z,1510160886.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:06.500Z,1510160886.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:06.881Z,1510160886.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:06.897Z,1510160886.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:07.284Z,1510160887.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:07.300Z,1510160887.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:07.686Z,1510160887.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:07.701Z,1510160887.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:08.090Z,1510160888.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:08.114Z,1510160888.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:08.493Z,1510160888.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:08.510Z,1510160888.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:08.891Z,1510160888.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:08.911Z,1510160888.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:09.285Z,1510160889.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:09.301Z,1510160889.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:09.685Z,1510160889.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:09.701Z,1510160889.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:10.086Z,1510160890.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:10.102Z,1510160890.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:10.485Z,1510160890.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:10.502Z,1510160890.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:10.890Z,1510160890.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:10.911Z,1510160890.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:11.293Z,1510160891.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:11.309Z,1510160891.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:11.691Z,1510160891.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:11.712Z,1510160891.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:12.085Z,1510160892.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:12.101Z,1510160892.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:12.485Z,1510160892.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:12.501Z,1510160892.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:12.885Z,1510160892.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:12.907Z,1510160892.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:13.286Z,1510160893.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:13.302Z,1510160893.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:13.686Z,1510160893.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:13.702Z,1510160893.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:14.094Z,1510160894.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:14.110Z,1510160894.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:14.493Z,1510160894.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:14.510Z,1510160894.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:14.893Z,1510160894.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:14.955Z,1510160894.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:15.285Z,1510160895.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:15.351Z,1510160895.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:15.685Z,1510160895.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:15.702Z,1510160895.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:16.086Z,1510160896.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:16.139Z,1510160896.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:16.485Z,1510160896.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:16.501Z,1510160896.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:16.899Z,1510160896.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:16.948Z,1510160896.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:17.299Z,1510160897.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:17.319Z,1510160897.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:17.695Z,1510160897.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:17.715Z,1510160897.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:18.083Z,1510160898.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:18.104Z,1510160898.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:18.486Z,1510160898.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:18.505Z,1510160898.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:18.876Z,1510160898.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:18.908Z,1510160898.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:19.297Z,1510160899.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:19.313Z,1510160899.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:19.680Z,1510160899.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:19.706Z,1510160899.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:20.089Z,1510160900.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:20.119Z,1510160900.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:20.499Z,1510160900.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:20.523Z,1510160900.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:20.900Z,1510160900.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:20.923Z,1510160900.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:21.279Z,1510160901.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:21.308Z,1510160901.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:21.679Z,1510160901.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:21.710Z,1510160901.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:22.080Z,1510160902.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:22.112Z,1510160902.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:22.479Z,1510160902.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:22.511Z,1510160902.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:22.895Z,1510160902.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:22.911Z,1510160902.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:23.300Z,1510160903.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:23.316Z,1510160903.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:23.696Z,1510160903.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:23.712Z,1510160903.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:24.079Z,1510160904.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:24.110Z,1510160904.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:24.480Z,1510160904.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:24.508Z,1510160904.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:24.879Z,1510160904.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:24.904Z,1510160904.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:25.280Z,1510160905.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:25.347Z,1510160905.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:25.679Z,1510160905.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:25.714Z,1510160905.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:26.096Z,1510160906.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:26.112Z,1510160906.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:26.499Z,1510160906.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:26.515Z,1510160906.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:26.900Z,1510160906.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:26.917Z,1510160906.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:27.279Z,1510160907.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:27.311Z,1510160907.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:27.679Z,1510160907.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:27.704Z,1510160907.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:28.080Z,1510160908.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:28.106Z,1510160908.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:28.479Z,1510160908.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:28.504Z,1510160908.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:28.895Z,1510160908.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:28.911Z,1510160908.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:29.292Z,1510160909.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:29.315Z,1510160909.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:29.696Z,1510160909.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:29.712Z,1510160909.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:30.079Z,1510160910.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:30.108Z,1510160910.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:30.479Z,1510160910.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:30.510Z,1510160910.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:30.879Z,1510160910.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:30.910Z,1510160910.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:31.280Z,1510160911.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:31.315Z,1510160911.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:31.676Z,1510160911.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:31.708Z,1510160911.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:32.090Z,1510160912.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:32.122Z,1510160912.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:32.501Z,1510160912.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:32.518Z,1510160912.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:32.905Z,1510160912.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:32.922Z,1510160912.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:33.277Z,1510160913.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:33.301Z,1510160913.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:33.680Z,1510160913.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:33.705Z,1510160913.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:34.080Z,1510160914.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:34.097Z,1510160914.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:34.480Z,1510160914.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:34.504Z,1510160914.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:34.894Z,1510160914.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:34.929Z,1510160914.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:35.295Z,1510160915.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:35.327Z,1510160915.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:35.694Z,1510160915.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:35.732Z,1510160915.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:36.084Z,1510160916.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:36.101Z,1510160916.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:36.479Z,1510160916.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:36.501Z,1510160916.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:36.879Z,1510160916.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:36.904Z,1510160916.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:37.278Z,1510160917.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:37.332Z,1510160917.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:37.686Z,1510160917.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:37.701Z,1510160917.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:38.094Z,1510160918.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:38.155Z,1510160918.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:38.499Z,1510160918.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:38.516Z,1510160918.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:38.895Z,1510160918.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:38.915Z,1510160918.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:39.275Z,1510160919.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:39.338Z,1510160919.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:39.707Z,1510160919.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:39.743Z,1510160919.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:40.080Z,1510160920.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:40.129Z,1510160920.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:40.479Z,1510160920.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:40.540Z,1510160920.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:40.892Z,1510160920.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:40.928Z,1510160920.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:41.295Z,1510160921.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:41.311Z,1510160921.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:41.697Z,1510160921.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:41.737Z,1510160921.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:42.088Z,1510160922.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:42.113Z,1510160922.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:42.480Z,1510160922.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:42.515Z,1510160922.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:42.880Z,1510160922.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:42.910Z,1510160922.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:43.280Z,1510160923.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:43.318Z,1510160923.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:43.679Z,1510160923.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:43.710Z,1510160923.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:44.100Z,1510160924.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:44.116Z,1510160924.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:44.499Z,1510160924.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:44.524Z,1510160924.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:44.897Z,1510160924.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:44.913Z,1510160924.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:45.279Z,1510160925.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:45.310Z,1510160925.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:45.679Z,1510160925.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:45.709Z,1510160925.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:46.080Z,1510160926.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:46.110Z,1510160926.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:46.476Z,1510160926.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:46.508Z,1510160926.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:46.900Z,1510160926.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:46.916Z,1510160926.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:47.301Z,1510160927.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:47.317Z,1510160927.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:47.690Z,1510160927.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:47.721Z,1510160927.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:48.079Z,1510160928.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:48.104Z,1510160928.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:48.479Z,1510160928.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:48.529Z,1510160928.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:48.875Z,1510160928.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:48.892Z,1510160928.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:49.280Z,1510160929.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:49.317Z,1510160929.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:49.675Z,1510160929.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:49.691Z,1510160929.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:50.094Z,1510160930.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:50.124Z,1510160930.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:50.127Z,1510160930.127 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T17:08:50.127Z,1510160930.127 [Default:CheckIn:C.Wait] Stopped
2017-11-08T17:08:50.127Z,1510160930.127 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T17:08:50.127Z,1510160930.127 [Default:CheckIn:D] Running Loop=1
2017-11-08T17:08:50.497Z,1510160930.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:50.522Z,1510160930.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:50.526Z,1510160930.526 [Default:CheckIn:D] Stopped
2017-11-08T17:08:50.526Z,1510160930.526 [Default:CheckIn:E] Running Loop=1
2017-11-08T17:08:50.901Z,1510160930.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:50.926Z,1510160930.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:50.930Z,1510160930.930 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 222.159098 min 
2017-11-08T17:08:50.930Z,1510160930.930 [Default:CheckIn:E] Stopped
2017-11-08T17:08:50.930Z,1510160930.930 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T17:08:50.931Z,1510160930.931 [Default:CheckIn] Stopped
2017-11-08T17:08:50.931Z,1510160930.931 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T17:08:50.931Z,1510160930.931 [Default:CheckIn](INFO): Running loop #10
2017-11-08T17:08:50.931Z,1510160930.931 [Default:CheckIn] Running Loop=10
2017-11-08T17:08:50.931Z,1510160930.931 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T17:08:50.931Z,1510160930.931 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T17:08:53.973Z,1510160933.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:53.990Z,1510160933.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:54.103Z,1510160934.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:54.126Z,1510160934.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:54.521Z,1510160934.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:54.537Z,1510160934.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:54.920Z,1510160934.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:54.937Z,1510160934.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:55.306Z,1510160935.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:55.332Z,1510160935.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:55.692Z,1510160935.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:55.711Z,1510160935.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:56.097Z,1510160936.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:56.129Z,1510160936.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:56.495Z,1510160936.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:56.512Z,1510160936.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:56.905Z,1510160936.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:56.939Z,1510160936.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:57.311Z,1510160937.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:57.343Z,1510160937.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:57.706Z,1510160937.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:57.734Z,1510160937.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:58.096Z,1510160938.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:58.111Z,1510160938.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:58.500Z,1510160938.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:58.516Z,1510160938.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:58.900Z,1510160938.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:58.943Z,1510160938.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:59.294Z,1510160939.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:59.315Z,1510160939.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:08:59.710Z,1510160939.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:08:59.746Z,1510160939.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:00.110Z,1510160940.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:00.156Z,1510160940.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:00.507Z,1510160940.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:00.527Z,1510160940.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:00.902Z,1510160940.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:00.974Z,1510160940.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:01.299Z,1510160941.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:01.319Z,1510160941.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:01.707Z,1510160941.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:01.723Z,1510160941.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:02.110Z,1510160942.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:02.163Z,1510160942.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:02.506Z,1510160942.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:02.523Z,1510160942.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:02.898Z,1510160942.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:02.955Z,1510160942.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:03.301Z,1510160943.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:03.317Z,1510160943.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:03.706Z,1510160943.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:03.723Z,1510160943.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:03.723Z,1510160943.723 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75
2017-11-08T17:09:03.723Z,1510160943.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T17:09:03.725Z,1510160943.725 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:03.725Z,1510160943.725 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75
2017-11-08T17:09:03.725Z,1510160943.725 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T17:09:03.727Z,1510160943.727 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:03.727Z,1510160943.727 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 75
2017-11-08T17:09:03.727Z,1510160943.727 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T17:09:03.801Z,1510160943.801 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T17:09:03.801Z,1510160943.801 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T17:09:03.802Z,1510160943.802 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T17:09:04.115Z,1510160944.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:04.210Z,1510160944.210 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T17:09:04.210Z,1510160944.210 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75
2017-11-08T17:09:04.211Z,1510160944.211 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T17:09:04.211Z,1510160944.211 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75
2017-11-08T17:09:04.211Z,1510160944.211 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T17:09:04.211Z,1510160944.211 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 75
2017-11-08T17:09:04.514Z,1510160944.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:04.529Z,1510160944.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T17:09:04.530Z,1510160944.530 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:09:04.530Z,1510160944.530 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:09:04.531Z,1510160944.531 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T17:09:04.531Z,1510160944.531 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:09:04.531Z,1510160944.531 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:09:04.532Z,1510160944.532 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T17:09:04.532Z,1510160944.532 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:09:04.532Z,1510160944.532 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:09:04.891Z,1510160944.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:04.921Z,1510160944.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T17:09:04.922Z,1510160944.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:05.295Z,1510160945.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:05.320Z,1510160945.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T17:09:05.321Z,1510160945.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:05.716Z,1510160945.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:05.732Z,1510160945.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T17:09:05.733Z,1510160945.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:06.115Z,1510160946.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:06.131Z,1510160946.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T17:09:06.132Z,1510160946.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:06.511Z,1510160946.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:06.535Z,1510160946.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T17:09:06.536Z,1510160946.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:06.896Z,1510160946.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:06.921Z,1510160946.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T17:09:06.922Z,1510160946.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:07.295Z,1510160947.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:07.323Z,1510160947.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T17:09:07.329Z,1510160947.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:07.713Z,1510160947.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:07.728Z,1510160947.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T17:09:07.729Z,1510160947.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:08.114Z,1510160948.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:08.130Z,1510160948.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T17:09:08.131Z,1510160948.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:08.512Z,1510160948.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:08.527Z,1510160948.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T17:09:08.528Z,1510160948.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:08.892Z,1510160948.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:08.926Z,1510160948.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T17:09:08.927Z,1510160948.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:09.295Z,1510160949.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:09.325Z,1510160949.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T17:09:09.326Z,1510160949.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:09.712Z,1510160949.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:09.727Z,1510160949.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T17:09:09.729Z,1510160949.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:10.117Z,1510160950.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:10.132Z,1510160950.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T17:09:10.133Z,1510160950.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:10.516Z,1510160950.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:10.532Z,1510160950.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T17:09:10.533Z,1510160950.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:10.891Z,1510160950.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:10.931Z,1510160950.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T17:09:10.932Z,1510160950.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:11.292Z,1510160951.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:11.338Z,1510160951.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T17:09:11.339Z,1510160951.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:11.710Z,1510160951.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:11.739Z,1510160951.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T17:09:11.740Z,1510160951.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:12.109Z,1510160952.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:12.139Z,1510160952.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T17:09:12.140Z,1510160952.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:12.509Z,1510160952.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:12.543Z,1510160952.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T17:09:12.544Z,1510160952.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:12.893Z,1510160952.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:12.909Z,1510160952.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T17:09:12.910Z,1510160952.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:13.296Z,1510160953.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:13.312Z,1510160953.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T17:09:13.313Z,1510160953.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:13.706Z,1510160953.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:13.737Z,1510160953.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T17:09:13.738Z,1510160953.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:14.106Z,1510160954.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:14.141Z,1510160954.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T17:09:14.141Z,1510160954.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:14.510Z,1510160954.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:14.534Z,1510160954.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T17:09:14.535Z,1510160954.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:14.897Z,1510160954.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:14.934Z,1510160954.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T17:09:14.935Z,1510160954.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:15.299Z,1510160955.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:15.320Z,1510160955.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T17:09:15.321Z,1510160955.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:15.710Z,1510160955.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:15.726Z,1510160955.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T17:09:15.727Z,1510160955.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:16.110Z,1510160956.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:16.126Z,1510160956.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T17:09:16.127Z,1510160956.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:16.507Z,1510160956.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:16.522Z,1510160956.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T17:09:16.523Z,1510160956.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:16.900Z,1510160956.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:16.932Z,1510160956.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T17:09:16.937Z,1510160956.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:17.302Z,1510160957.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:17.318Z,1510160957.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T17:09:17.319Z,1510160957.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:17.706Z,1510160957.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:17.723Z,1510160957.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T17:09:17.724Z,1510160957.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:18.110Z,1510160958.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:18.126Z,1510160958.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T17:09:18.127Z,1510160958.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:18.509Z,1510160958.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:18.525Z,1510160958.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T17:09:18.526Z,1510160958.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:18.903Z,1510160958.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:18.918Z,1510160958.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T17:09:18.919Z,1510160958.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:19.299Z,1510160959.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:19.319Z,1510160959.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T17:09:19.320Z,1510160959.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:19.710Z,1510160959.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:19.725Z,1510160959.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T17:09:19.726Z,1510160959.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:20.107Z,1510160960.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:20.127Z,1510160960.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T17:09:20.128Z,1510160960.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:20.507Z,1510160960.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:20.527Z,1510160960.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T17:09:20.528Z,1510160960.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:20.903Z,1510160960.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:20.919Z,1510160960.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T17:09:20.920Z,1510160960.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:21.305Z,1510160961.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:21.321Z,1510160961.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T17:09:21.322Z,1510160961.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:21.710Z,1510160961.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:21.726Z,1510160961.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T17:09:21.727Z,1510160961.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:22.109Z,1510160962.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:22.125Z,1510160962.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T17:09:22.125Z,1510160962.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:22.512Z,1510160962.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:22.528Z,1510160962.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T17:09:22.529Z,1510160962.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:22.903Z,1510160962.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:22.919Z,1510160962.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T17:09:22.920Z,1510160962.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:23.291Z,1510160963.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:23.360Z,1510160963.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T17:09:23.361Z,1510160963.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:23.712Z,1510160963.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:23.729Z,1510160963.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:24.115Z,1510160964.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:24.171Z,1510160964.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:24.516Z,1510160964.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:24.531Z,1510160964.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:24.892Z,1510160964.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:24.955Z,1510160964.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:25.299Z,1510160965.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:25.321Z,1510160965.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:25.712Z,1510160965.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:25.728Z,1510160965.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:26.111Z,1510160966.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:26.128Z,1510160966.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:26.511Z,1510160966.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:26.532Z,1510160966.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:26.903Z,1510160966.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:26.918Z,1510160966.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:27.291Z,1510160967.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:27.322Z,1510160967.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:27.711Z,1510160967.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:27.732Z,1510160967.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:28.112Z,1510160968.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:28.131Z,1510160968.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:28.511Z,1510160968.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:28.531Z,1510160968.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:28.902Z,1510160968.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:28.918Z,1510160968.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:29.301Z,1510160969.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:29.317Z,1510160969.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:29.706Z,1510160969.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:29.726Z,1510160969.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:30.114Z,1510160970.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:30.130Z,1510160970.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:30.512Z,1510160970.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:30.527Z,1510160970.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:30.892Z,1510160970.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:30.930Z,1510160970.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:31.299Z,1510160971.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:31.320Z,1510160971.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:31.715Z,1510160971.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:31.730Z,1510160971.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:32.111Z,1510160972.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:32.127Z,1510160972.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:32.511Z,1510160972.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:32.531Z,1510160972.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:32.892Z,1510160972.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:32.917Z,1510160972.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:33.291Z,1510160973.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:33.355Z,1510160973.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:33.711Z,1510160973.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:33.727Z,1510160973.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:34.115Z,1510160974.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:34.135Z,1510160974.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:34.511Z,1510160974.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:34.535Z,1510160974.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:34.902Z,1510160974.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:34.918Z,1510160974.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:35.291Z,1510160975.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:35.316Z,1510160975.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:35.707Z,1510160975.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:35.724Z,1510160975.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:36.114Z,1510160976.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:36.135Z,1510160976.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:36.512Z,1510160976.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:36.535Z,1510160976.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:36.902Z,1510160976.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:36.919Z,1510160976.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:37.299Z,1510160977.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:37.324Z,1510160977.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:37.712Z,1510160977.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:37.728Z,1510160977.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:38.110Z,1510160978.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:38.130Z,1510160978.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:38.512Z,1510160978.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:38.528Z,1510160978.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:38.896Z,1510160978.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:38.921Z,1510160978.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:39.295Z,1510160979.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:39.320Z,1510160979.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:39.712Z,1510160979.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:39.728Z,1510160979.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:40.111Z,1510160980.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:40.127Z,1510160980.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:40.512Z,1510160980.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:40.528Z,1510160980.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:40.896Z,1510160980.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:40.928Z,1510160980.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:41.295Z,1510160981.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:41.328Z,1510160981.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:41.712Z,1510160981.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:41.728Z,1510160981.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:42.115Z,1510160982.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:42.136Z,1510160982.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:42.511Z,1510160982.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:42.527Z,1510160982.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:42.904Z,1510160982.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:42.920Z,1510160982.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:43.295Z,1510160983.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:43.320Z,1510160983.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:43.716Z,1510160983.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:43.732Z,1510160983.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:44.115Z,1510160984.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:44.131Z,1510160984.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:44.515Z,1510160984.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:44.531Z,1510160984.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:44.896Z,1510160984.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:44.921Z,1510160984.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:45.295Z,1510160985.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:45.347Z,1510160985.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:45.712Z,1510160985.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:45.772Z,1510160985.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:46.116Z,1510160986.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:46.132Z,1510160986.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:46.512Z,1510160986.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:46.528Z,1510160986.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:46.896Z,1510160986.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:46.943Z,1510160986.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:47.291Z,1510160987.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:47.328Z,1510160987.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:47.702Z,1510160987.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:47.755Z,1510160987.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:48.115Z,1510160988.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:48.131Z,1510160988.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:48.516Z,1510160988.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:48.532Z,1510160988.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:48.896Z,1510160988.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:48.932Z,1510160988.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:49.295Z,1510160989.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:49.330Z,1510160989.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:49.713Z,1510160989.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:49.729Z,1510160989.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:50.113Z,1510160990.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:50.129Z,1510160990.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:50.516Z,1510160990.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:50.532Z,1510160990.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:50.901Z,1510160990.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:50.926Z,1510160990.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:53.982Z,1510160993.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:53.999Z,1510160993.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:54.146Z,1510160994.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:54.179Z,1510160994.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:54.541Z,1510160994.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:54.578Z,1510160994.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:54.938Z,1510160994.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:54.959Z,1510160994.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:55.330Z,1510160995.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:55.351Z,1510160995.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:55.733Z,1510160995.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:55.782Z,1510160995.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:56.131Z,1510160996.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:56.155Z,1510160996.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:56.527Z,1510160996.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:56.549Z,1510160996.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:56.934Z,1510160996.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:56.971Z,1510160996.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:57.342Z,1510160997.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:57.384Z,1510160997.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:57.735Z,1510160997.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:57.752Z,1510160997.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:58.130Z,1510160998.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:58.146Z,1510160998.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:58.530Z,1510160998.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:58.552Z,1510160998.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:58.930Z,1510160998.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:58.947Z,1510160998.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:59.326Z,1510160999.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:59.342Z,1510160999.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:09:59.734Z,1510160999.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:09:59.751Z,1510160999.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:00.138Z,1510161000.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:00.154Z,1510161000.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:00.537Z,1510161000.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:00.554Z,1510161000.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:00.930Z,1510161000.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:00.946Z,1510161000.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:01.332Z,1510161001.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:01.349Z,1510161001.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:01.735Z,1510161001.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:01.751Z,1510161001.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:02.134Z,1510161002.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:02.155Z,1510161002.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:02.535Z,1510161002.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:02.555Z,1510161002.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:02.931Z,1510161002.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:02.947Z,1510161002.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:03.330Z,1510161003.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:03.352Z,1510161003.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:03.735Z,1510161003.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:03.751Z,1510161003.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:04.135Z,1510161004.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:04.158Z,1510161004.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:04.534Z,1510161004.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:04.556Z,1510161004.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:04.930Z,1510161004.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:04.947Z,1510161004.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:05.330Z,1510161005.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:05.346Z,1510161005.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:05.738Z,1510161005.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:05.755Z,1510161005.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:06.138Z,1510161006.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:06.155Z,1510161006.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:06.537Z,1510161006.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:06.560Z,1510161006.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:06.930Z,1510161006.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:06.946Z,1510161006.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:07.332Z,1510161007.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:07.348Z,1510161007.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:07.738Z,1510161007.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:07.754Z,1510161007.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:08.138Z,1510161008.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:08.227Z,1510161008.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:08.539Z,1510161008.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:08.556Z,1510161008.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:08.920Z,1510161008.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:08.988Z,1510161008.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:09.323Z,1510161009.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:09.355Z,1510161009.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:09.738Z,1510161009.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:09.787Z,1510161009.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:10.144Z,1510161010.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:10.163Z,1510161010.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:10.540Z,1510161010.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:10.556Z,1510161010.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:10.924Z,1510161010.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:10.952Z,1510161010.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:11.323Z,1510161011.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:11.348Z,1510161011.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:11.735Z,1510161011.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:11.751Z,1510161011.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:12.143Z,1510161012.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:12.159Z,1510161012.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:12.544Z,1510161012.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:12.560Z,1510161012.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:12.920Z,1510161012.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:12.945Z,1510161012.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:13.323Z,1510161013.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:13.351Z,1510161013.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:13.744Z,1510161013.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:13.760Z,1510161013.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:14.139Z,1510161014.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:14.155Z,1510161014.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:14.539Z,1510161014.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:14.555Z,1510161014.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:14.924Z,1510161014.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:14.949Z,1510161014.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:15.323Z,1510161015.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:15.355Z,1510161015.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:15.740Z,1510161015.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:15.756Z,1510161015.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:16.144Z,1510161016.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:16.160Z,1510161016.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:16.540Z,1510161016.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:16.556Z,1510161016.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:16.924Z,1510161016.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:16.958Z,1510161016.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:17.323Z,1510161017.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:17.358Z,1510161017.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:17.735Z,1510161017.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:17.752Z,1510161017.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:18.143Z,1510161018.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:18.199Z,1510161018.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:18.544Z,1510161018.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:18.563Z,1510161018.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:18.924Z,1510161018.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:18.949Z,1510161018.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:19.323Z,1510161019.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:19.355Z,1510161019.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:19.744Z,1510161019.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:19.760Z,1510161019.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:20.144Z,1510161020.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:20.160Z,1510161020.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:20.539Z,1510161020.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:20.556Z,1510161020.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:20.924Z,1510161020.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:20.958Z,1510161020.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:21.323Z,1510161021.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:21.355Z,1510161021.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:21.739Z,1510161021.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:21.756Z,1510161021.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:22.143Z,1510161022.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:22.163Z,1510161022.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:22.540Z,1510161022.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:22.556Z,1510161022.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:22.924Z,1510161022.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:22.952Z,1510161022.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:23.323Z,1510161023.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:23.356Z,1510161023.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:23.734Z,1510161023.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:23.755Z,1510161023.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:24.143Z,1510161024.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:24.159Z,1510161024.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:24.543Z,1510161024.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:24.559Z,1510161024.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:24.924Z,1510161024.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:24.949Z,1510161024.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:25.323Z,1510161025.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:25.348Z,1510161025.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:25.745Z,1510161025.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:25.761Z,1510161025.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:26.144Z,1510161026.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:26.160Z,1510161026.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:26.540Z,1510161026.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:26.556Z,1510161026.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:26.925Z,1510161026.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:26.951Z,1510161026.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:27.327Z,1510161027.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:27.360Z,1510161027.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:27.739Z,1510161027.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:27.756Z,1510161027.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:28.144Z,1510161028.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:28.161Z,1510161028.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:28.540Z,1510161028.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:28.556Z,1510161028.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:28.924Z,1510161028.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:28.956Z,1510161028.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:29.324Z,1510161029.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:29.349Z,1510161029.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:29.739Z,1510161029.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:29.755Z,1510161029.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:30.144Z,1510161030.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:30.214Z,1510161030.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:30.545Z,1510161030.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:30.618Z,1510161030.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:30.924Z,1510161030.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:30.949Z,1510161030.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:31.323Z,1510161031.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:31.349Z,1510161031.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:31.745Z,1510161031.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:31.761Z,1510161031.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:32.139Z,1510161032.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:32.195Z,1510161032.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:32.542Z,1510161032.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:32.558Z,1510161032.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:32.920Z,1510161032.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:32.967Z,1510161032.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:33.320Z,1510161033.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:33.352Z,1510161033.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:33.734Z,1510161033.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:33.767Z,1510161033.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:34.134Z,1510161034.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:34.167Z,1510161034.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:34.534Z,1510161034.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:34.567Z,1510161034.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:34.928Z,1510161034.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:34.961Z,1510161034.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:35.327Z,1510161035.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:35.344Z,1510161035.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:35.734Z,1510161035.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:35.772Z,1510161035.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:36.142Z,1510161036.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:36.178Z,1510161036.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:36.537Z,1510161036.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:36.554Z,1510161036.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:36.930Z,1510161036.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:36.946Z,1510161036.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:37.330Z,1510161037.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:37.346Z,1510161037.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:37.733Z,1510161037.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:37.749Z,1510161037.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:38.134Z,1510161038.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:38.150Z,1510161038.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:38.534Z,1510161038.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:38.550Z,1510161038.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:38.926Z,1510161038.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:38.944Z,1510161038.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:39.330Z,1510161039.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:39.346Z,1510161039.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:39.734Z,1510161039.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:39.750Z,1510161039.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:40.134Z,1510161040.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:40.150Z,1510161040.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:40.535Z,1510161040.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:40.551Z,1510161040.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:40.929Z,1510161040.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:40.945Z,1510161040.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:41.326Z,1510161041.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:41.382Z,1510161041.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:41.735Z,1510161041.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:41.751Z,1510161041.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:42.138Z,1510161042.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:42.155Z,1510161042.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:42.537Z,1510161042.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:42.559Z,1510161042.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:42.929Z,1510161042.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:42.946Z,1510161042.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:43.328Z,1510161043.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:43.352Z,1510161043.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:43.732Z,1510161043.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:43.748Z,1510161043.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:44.134Z,1510161044.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:44.150Z,1510161044.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:44.534Z,1510161044.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:44.550Z,1510161044.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:44.926Z,1510161044.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:44.943Z,1510161044.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:45.325Z,1510161045.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:45.341Z,1510161045.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:45.734Z,1510161045.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:45.750Z,1510161045.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:46.133Z,1510161046.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:46.149Z,1510161046.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:46.534Z,1510161046.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:46.550Z,1510161046.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:46.928Z,1510161046.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:46.944Z,1510161046.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:47.329Z,1510161047.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:47.351Z,1510161047.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:47.734Z,1510161047.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:47.750Z,1510161047.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:48.137Z,1510161048.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:48.154Z,1510161048.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:48.533Z,1510161048.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:48.555Z,1510161048.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:48.929Z,1510161048.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:48.946Z,1510161048.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:49.327Z,1510161049.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:49.348Z,1510161049.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:49.735Z,1510161049.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:49.755Z,1510161049.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:50.134Z,1510161050.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:50.155Z,1510161050.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:50.538Z,1510161050.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:50.555Z,1510161050.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:50.930Z,1510161050.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:50.946Z,1510161050.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:54.032Z,1510161054.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:54.104Z,1510161054.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:54.244Z,1510161054.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:54.283Z,1510161054.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:54.645Z,1510161054.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:54.661Z,1510161054.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:55.046Z,1510161055.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:55.092Z,1510161055.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:55.433Z,1510161055.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:55.450Z,1510161055.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:55.830Z,1510161055.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:55.882Z,1510161055.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:56.227Z,1510161056.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:56.257Z,1510161056.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:56.626Z,1510161056.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:56.653Z,1510161056.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:57.047Z,1510161057.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:57.062Z,1510161057.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:57.447Z,1510161057.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:57.467Z,1510161057.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:57.846Z,1510161057.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:57.867Z,1510161057.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:58.234Z,1510161058.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:58.249Z,1510161058.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:58.633Z,1510161058.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:58.649Z,1510161058.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:59.031Z,1510161059.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:59.053Z,1510161059.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:59.423Z,1510161059.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:59.448Z,1510161059.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:10:59.843Z,1510161059.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:10:59.860Z,1510161059.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:00.246Z,1510161060.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:00.262Z,1510161060.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:00.644Z,1510161060.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:00.663Z,1510161060.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:01.033Z,1510161061.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:01.049Z,1510161061.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:01.433Z,1510161061.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:01.449Z,1510161061.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:01.834Z,1510161061.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:01.849Z,1510161061.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:02.234Z,1510161062.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:02.250Z,1510161062.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:02.631Z,1510161062.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:02.652Z,1510161062.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:03.044Z,1510161063.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:03.060Z,1510161063.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:03.446Z,1510161063.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:03.467Z,1510161063.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:03.843Z,1510161063.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:03.863Z,1510161063.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:04.223Z,1510161064.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:04.285Z,1510161064.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:04.634Z,1510161064.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:04.650Z,1510161064.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:05.031Z,1510161065.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:05.053Z,1510161065.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:05.423Z,1510161065.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:05.454Z,1510161065.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:05.847Z,1510161065.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:05.868Z,1510161065.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:06.243Z,1510161066.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:06.260Z,1510161066.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:06.644Z,1510161066.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:06.667Z,1510161066.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:07.033Z,1510161067.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:07.050Z,1510161067.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:07.433Z,1510161067.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:07.449Z,1510161067.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:07.834Z,1510161067.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:07.849Z,1510161067.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:08.234Z,1510161068.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:08.250Z,1510161068.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:08.631Z,1510161068.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:08.666Z,1510161068.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:09.044Z,1510161069.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:09.060Z,1510161069.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:09.447Z,1510161069.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:09.467Z,1510161069.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:09.843Z,1510161069.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:09.860Z,1510161069.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:10.223Z,1510161070.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:10.251Z,1510161070.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:10.627Z,1510161070.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:10.660Z,1510161070.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:11.028Z,1510161071.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:11.060Z,1510161071.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:11.423Z,1510161071.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:11.458Z,1510161071.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:11.847Z,1510161071.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:11.864Z,1510161071.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:12.247Z,1510161072.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:12.264Z,1510161072.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:12.643Z,1510161072.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:12.660Z,1510161072.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:13.028Z,1510161073.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:13.053Z,1510161073.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:13.423Z,1510161073.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:13.448Z,1510161073.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:13.823Z,1510161073.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:13.849Z,1510161073.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:14.227Z,1510161074.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:14.259Z,1510161074.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:14.627Z,1510161074.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:14.658Z,1510161074.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:15.043Z,1510161075.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:15.059Z,1510161075.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:15.447Z,1510161075.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:15.463Z,1510161075.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:15.843Z,1510161075.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:15.860Z,1510161075.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:16.223Z,1510161076.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:16.275Z,1510161076.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:16.627Z,1510161076.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:16.679Z,1510161076.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:17.028Z,1510161077.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:17.063Z,1510161077.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:17.427Z,1510161077.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:17.458Z,1510161077.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:17.848Z,1510161077.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:17.865Z,1510161077.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:18.246Z,1510161078.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:18.305Z,1510161078.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:18.649Z,1510161078.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:18.671Z,1510161078.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:19.027Z,1510161079.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:19.075Z,1510161079.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:19.427Z,1510161079.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:19.460Z,1510161079.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:19.827Z,1510161079.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:19.865Z,1510161079.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:20.228Z,1510161080.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:20.262Z,1510161080.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:20.627Z,1510161080.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:20.662Z,1510161080.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:21.054Z,1510161081.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:21.069Z,1510161081.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:21.437Z,1510161081.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:21.471Z,1510161081.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:21.838Z,1510161081.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:21.871Z,1510161081.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:22.224Z,1510161082.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:22.240Z,1510161082.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:22.624Z,1510161082.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:22.667Z,1510161082.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:23.029Z,1510161083.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:23.067Z,1510161083.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:23.432Z,1510161083.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:23.447Z,1510161083.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:23.837Z,1510161083.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:23.869Z,1510161083.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:24.246Z,1510161084.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:24.277Z,1510161084.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:24.642Z,1510161084.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:24.680Z,1510161084.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:25.027Z,1510161085.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:25.048Z,1510161085.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:25.435Z,1510161085.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:25.456Z,1510161085.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:25.827Z,1510161085.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:25.847Z,1510161085.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:26.228Z,1510161086.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:26.245Z,1510161086.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:26.631Z,1510161086.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:26.647Z,1510161086.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:27.038Z,1510161087.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:27.054Z,1510161087.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:27.446Z,1510161087.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:27.499Z,1510161087.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:27.838Z,1510161087.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:27.855Z,1510161087.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:28.232Z,1510161088.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:28.248Z,1510161088.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:28.632Z,1510161088.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:28.649Z,1510161088.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:29.032Z,1510161089.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:29.048Z,1510161089.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:29.431Z,1510161089.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:29.447Z,1510161089.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:29.835Z,1510161089.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:29.852Z,1510161089.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:30.242Z,1510161090.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:30.259Z,1510161090.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:30.642Z,1510161090.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:30.658Z,1510161090.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:31.026Z,1510161091.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:31.055Z,1510161091.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:31.432Z,1510161091.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:31.449Z,1510161091.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:31.830Z,1510161091.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:31.847Z,1510161091.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:32.231Z,1510161092.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:32.247Z,1510161092.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:32.633Z,1510161092.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:32.649Z,1510161092.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:33.040Z,1510161093.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:33.056Z,1510161093.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:33.438Z,1510161093.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:33.459Z,1510161093.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:33.838Z,1510161093.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:33.859Z,1510161093.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:34.234Z,1510161094.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:34.250Z,1510161094.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:34.634Z,1510161094.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:34.650Z,1510161094.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:35.034Z,1510161095.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:35.051Z,1510161095.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:35.434Z,1510161095.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:35.449Z,1510161095.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:35.839Z,1510161095.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:35.859Z,1510161095.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:36.242Z,1510161096.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:36.258Z,1510161096.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:36.642Z,1510161096.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:36.658Z,1510161096.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:37.033Z,1510161097.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:37.056Z,1510161097.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:37.433Z,1510161097.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:37.450Z,1510161097.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:37.834Z,1510161097.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:37.850Z,1510161097.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:38.229Z,1510161098.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:38.249Z,1510161098.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:38.633Z,1510161098.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:38.650Z,1510161098.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:39.041Z,1510161099.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:39.063Z,1510161099.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:39.438Z,1510161099.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:39.527Z,1510161099.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:39.843Z,1510161099.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:39.859Z,1510161099.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:40.234Z,1510161100.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:40.250Z,1510161100.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:40.627Z,1510161100.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:40.687Z,1510161100.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:41.034Z,1510161101.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:41.050Z,1510161101.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:41.434Z,1510161101.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:41.485Z,1510161101.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:41.843Z,1510161101.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:41.863Z,1510161101.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:42.242Z,1510161102.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:42.263Z,1510161102.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:42.643Z,1510161102.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:42.663Z,1510161102.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:43.026Z,1510161103.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:43.081Z,1510161103.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:43.427Z,1510161103.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:43.463Z,1510161103.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:43.827Z,1510161103.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:43.843Z,1510161103.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:44.224Z,1510161104.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:44.247Z,1510161104.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:44.630Z,1510161104.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:44.646Z,1510161104.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:45.041Z,1510161105.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:45.070Z,1510161105.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:45.437Z,1510161105.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:45.469Z,1510161105.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:45.842Z,1510161105.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:45.865Z,1510161105.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:46.231Z,1510161106.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:46.247Z,1510161106.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:46.631Z,1510161106.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:46.671Z,1510161106.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:47.031Z,1510161107.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:47.071Z,1510161107.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:47.431Z,1510161107.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:47.447Z,1510161107.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:47.838Z,1510161107.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:47.866Z,1510161107.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:48.246Z,1510161108.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:48.271Z,1510161108.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:48.646Z,1510161108.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:48.671Z,1510161108.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:49.025Z,1510161109.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:49.048Z,1510161109.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:49.431Z,1510161109.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:49.452Z,1510161109.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:49.830Z,1510161109.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:49.877Z,1510161109.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:50.227Z,1510161110.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:50.247Z,1510161110.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:50.631Z,1510161110.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:50.648Z,1510161110.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:51.045Z,1510161111.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:51.070Z,1510161111.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:54.130Z,1510161114.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:54.146Z,1510161114.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:54.280Z,1510161114.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:54.321Z,1510161114.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:54.670Z,1510161114.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:54.687Z,1510161114.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:55.060Z,1510161115.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:55.092Z,1510161115.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:55.469Z,1510161115.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:55.485Z,1510161115.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:55.880Z,1510161115.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:55.896Z,1510161115.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:56.274Z,1510161116.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:56.294Z,1510161116.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:56.675Z,1510161116.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:56.692Z,1510161116.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:57.059Z,1510161117.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:57.085Z,1510161117.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:57.459Z,1510161117.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:57.485Z,1510161117.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:57.859Z,1510161117.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:57.892Z,1510161117.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:58.260Z,1510161118.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:58.291Z,1510161118.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:58.655Z,1510161118.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:58.680Z,1510161118.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:59.076Z,1510161119.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:59.092Z,1510161119.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:59.480Z,1510161119.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:59.503Z,1510161119.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:11:59.877Z,1510161119.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:11:59.893Z,1510161119.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:00.259Z,1510161120.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:00.290Z,1510161120.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:00.659Z,1510161120.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:00.685Z,1510161120.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:01.060Z,1510161121.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:01.087Z,1510161121.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:01.455Z,1510161121.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:01.486Z,1510161121.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:01.881Z,1510161121.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:01.973Z,1510161121.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:02.275Z,1510161122.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:02.292Z,1510161122.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:02.678Z,1510161122.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:02.727Z,1510161122.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:03.055Z,1510161123.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:03.086Z,1510161123.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:03.460Z,1510161123.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:03.529Z,1510161123.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:03.860Z,1510161123.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:03.886Z,1510161123.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:04.260Z,1510161124.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:04.286Z,1510161124.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:04.655Z,1510161124.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:04.687Z,1510161124.687 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:04.687Z,1510161124.687 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76
2017-11-08T17:12:04.687Z,1510161124.687 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T17:12:04.689Z,1510161124.689 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:04.689Z,1510161124.689 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76
2017-11-08T17:12:04.689Z,1510161124.689 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T17:12:04.691Z,1510161124.691 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:04.691Z,1510161124.691 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 76
2017-11-08T17:12:04.691Z,1510161124.691 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T17:12:04.773Z,1510161124.773 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T17:12:04.773Z,1510161124.773 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T17:12:04.773Z,1510161124.773 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T17:12:05.078Z,1510161125.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:05.177Z,1510161125.177 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T17:12:05.177Z,1510161125.177 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76
2017-11-08T17:12:05.177Z,1510161125.177 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T17:12:05.177Z,1510161125.177 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76
2017-11-08T17:12:05.178Z,1510161125.178 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T17:12:05.178Z,1510161125.178 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 76
2017-11-08T17:12:05.477Z,1510161125.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:05.498Z,1510161125.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T17:12:05.499Z,1510161125.499 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:12:05.499Z,1510161125.499 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:12:05.499Z,1510161125.499 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T17:12:05.500Z,1510161125.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:12:05.500Z,1510161125.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:12:05.500Z,1510161125.500 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T17:12:05.501Z,1510161125.501 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:12:05.501Z,1510161125.501 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:12:05.870Z,1510161125.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:05.905Z,1510161125.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T17:12:05.906Z,1510161125.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:06.259Z,1510161126.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:06.295Z,1510161126.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T17:12:06.296Z,1510161126.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:06.655Z,1510161126.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:06.670Z,1510161126.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T17:12:06.671Z,1510161126.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:07.060Z,1510161127.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:07.076Z,1510161127.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T17:12:07.097Z,1510161127.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:07.459Z,1510161127.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:07.479Z,1510161127.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T17:12:07.480Z,1510161127.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:07.877Z,1510161127.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:07.905Z,1510161127.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T17:12:07.906Z,1510161127.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:08.274Z,1510161128.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:08.305Z,1510161128.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T17:12:08.306Z,1510161128.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:08.678Z,1510161128.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:08.709Z,1510161128.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T17:12:08.710Z,1510161128.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:09.063Z,1510161129.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:09.078Z,1510161129.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T17:12:09.079Z,1510161129.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:09.463Z,1510161129.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:09.483Z,1510161129.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T17:12:09.484Z,1510161129.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:09.863Z,1510161129.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:09.879Z,1510161129.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T17:12:09.880Z,1510161129.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:10.267Z,1510161130.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:10.283Z,1510161130.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T17:12:10.284Z,1510161130.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:10.659Z,1510161130.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:10.684Z,1510161130.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T17:12:10.689Z,1510161130.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:11.070Z,1510161131.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:11.087Z,1510161131.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T17:12:11.087Z,1510161131.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:11.470Z,1510161131.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:11.486Z,1510161131.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T17:12:11.487Z,1510161131.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:11.867Z,1510161131.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:11.922Z,1510161131.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T17:12:11.923Z,1510161131.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:12.264Z,1510161132.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:12.280Z,1510161132.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T17:12:12.281Z,1510161132.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:12.659Z,1510161132.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:12.695Z,1510161132.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T17:12:12.696Z,1510161132.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:13.062Z,1510161133.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:13.079Z,1510161133.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T17:12:13.080Z,1510161133.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:13.464Z,1510161133.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:13.481Z,1510161133.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T17:12:13.482Z,1510161133.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:13.873Z,1510161133.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:13.890Z,1510161133.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T17:12:13.891Z,1510161133.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:14.270Z,1510161134.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:14.288Z,1510161134.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T17:12:14.289Z,1510161134.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:14.671Z,1510161134.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:14.687Z,1510161134.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T17:12:14.689Z,1510161134.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:15.062Z,1510161135.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:15.077Z,1510161135.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T17:12:15.078Z,1510161135.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:15.465Z,1510161135.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:15.481Z,1510161135.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T17:12:15.482Z,1510161135.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:15.865Z,1510161135.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:15.887Z,1510161135.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T17:12:15.888Z,1510161135.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:16.266Z,1510161136.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:16.282Z,1510161136.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T17:12:16.283Z,1510161136.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:16.665Z,1510161136.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:16.681Z,1510161136.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T17:12:16.682Z,1510161136.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:17.070Z,1510161137.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:17.091Z,1510161137.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T17:12:17.092Z,1510161137.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:17.473Z,1510161137.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:17.489Z,1510161137.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T17:12:17.490Z,1510161137.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:17.870Z,1510161137.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:17.886Z,1510161137.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T17:12:17.887Z,1510161137.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:18.265Z,1510161138.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:18.281Z,1510161138.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T17:12:18.282Z,1510161138.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:18.663Z,1510161138.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:18.680Z,1510161138.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T17:12:18.681Z,1510161138.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:19.066Z,1510161139.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:19.082Z,1510161139.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T17:12:19.083Z,1510161139.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:19.463Z,1510161139.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:19.483Z,1510161139.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T17:12:19.484Z,1510161139.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:19.873Z,1510161139.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:19.889Z,1510161139.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T17:12:19.890Z,1510161139.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:20.274Z,1510161140.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:20.290Z,1510161140.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T17:12:20.291Z,1510161140.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:20.670Z,1510161140.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:20.691Z,1510161140.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T17:12:20.692Z,1510161140.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:21.066Z,1510161141.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:21.082Z,1510161141.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T17:12:21.083Z,1510161141.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:21.459Z,1510161141.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:21.480Z,1510161141.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T17:12:21.481Z,1510161141.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:21.865Z,1510161141.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:21.881Z,1510161141.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T17:12:21.882Z,1510161141.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:22.267Z,1510161142.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:22.283Z,1510161142.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T17:12:22.284Z,1510161142.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:22.665Z,1510161142.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:22.687Z,1510161142.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T17:12:22.688Z,1510161142.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:23.074Z,1510161143.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:23.090Z,1510161143.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T17:12:23.091Z,1510161143.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:23.473Z,1510161143.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:23.489Z,1510161143.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T17:12:23.490Z,1510161143.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:23.870Z,1510161143.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:23.958Z,1510161143.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T17:12:23.959Z,1510161143.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:24.255Z,1510161144.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:24.290Z,1510161144.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T17:12:24.291Z,1510161144.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:24.666Z,1510161144.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:24.682Z,1510161144.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-08T17:12:24.683Z,1510161144.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:25.066Z,1510161145.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:25.127Z,1510161145.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:25.463Z,1510161145.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:25.484Z,1510161145.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:25.879Z,1510161145.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:25.927Z,1510161145.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:26.278Z,1510161146.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:26.299Z,1510161146.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:26.679Z,1510161146.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:26.699Z,1510161146.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:27.063Z,1510161147.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:27.085Z,1510161147.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:27.465Z,1510161147.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:27.482Z,1510161147.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:27.865Z,1510161147.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:27.888Z,1510161147.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:28.268Z,1510161148.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:28.284Z,1510161148.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:28.655Z,1510161148.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:28.692Z,1510161148.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:29.076Z,1510161149.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:29.092Z,1510161149.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:29.479Z,1510161149.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:29.495Z,1510161149.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:29.870Z,1510161149.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:29.890Z,1510161149.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:30.255Z,1510161150.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:30.286Z,1510161150.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:30.666Z,1510161150.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:30.683Z,1510161150.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:31.056Z,1510161151.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:31.081Z,1510161151.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:31.462Z,1510161151.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:31.483Z,1510161151.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:31.879Z,1510161151.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:31.896Z,1510161151.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:32.275Z,1510161152.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:32.292Z,1510161152.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:32.675Z,1510161152.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:32.692Z,1510161152.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:33.056Z,1510161153.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:33.090Z,1510161153.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:33.455Z,1510161153.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:33.492Z,1510161153.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:33.863Z,1510161153.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:33.884Z,1510161153.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:34.267Z,1510161154.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:34.327Z,1510161154.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:34.665Z,1510161154.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:34.681Z,1510161154.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:35.075Z,1510161155.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:35.092Z,1510161155.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:35.479Z,1510161155.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:35.500Z,1510161155.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:35.875Z,1510161155.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:35.892Z,1510161155.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:36.263Z,1510161156.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:36.285Z,1510161156.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:36.655Z,1510161156.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:36.688Z,1510161156.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:37.056Z,1510161157.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:37.090Z,1510161157.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:37.459Z,1510161157.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:37.492Z,1510161157.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:37.880Z,1510161157.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:37.897Z,1510161157.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:38.280Z,1510161158.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:38.296Z,1510161158.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:38.675Z,1510161158.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:38.692Z,1510161158.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:39.060Z,1510161159.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:39.111Z,1510161159.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:39.455Z,1510161159.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:39.486Z,1510161159.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:39.859Z,1510161159.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:39.885Z,1510161159.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:40.261Z,1510161160.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:40.287Z,1510161160.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:40.659Z,1510161160.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:40.692Z,1510161160.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:41.069Z,1510161161.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:41.093Z,1510161161.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:41.475Z,1510161161.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:41.496Z,1510161161.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:41.876Z,1510161161.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:41.892Z,1510161161.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:42.260Z,1510161162.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:42.286Z,1510161162.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:42.656Z,1510161162.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:42.689Z,1510161162.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:43.061Z,1510161163.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:43.089Z,1510161163.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:43.460Z,1510161163.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:43.491Z,1510161163.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:43.881Z,1510161163.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:43.898Z,1510161163.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:44.276Z,1510161164.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:44.293Z,1510161164.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:44.678Z,1510161164.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:44.694Z,1510161164.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:45.055Z,1510161165.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:45.084Z,1510161165.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:45.459Z,1510161165.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:45.495Z,1510161165.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:45.859Z,1510161165.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:45.896Z,1510161165.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:46.256Z,1510161166.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:46.295Z,1510161166.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:46.659Z,1510161166.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:46.717Z,1510161166.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:47.070Z,1510161167.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:47.104Z,1510161167.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:47.481Z,1510161167.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:47.537Z,1510161167.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:47.870Z,1510161167.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:47.899Z,1510161167.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:48.263Z,1510161168.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:48.312Z,1510161168.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:48.657Z,1510161168.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:48.695Z,1510161168.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:49.057Z,1510161169.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:49.085Z,1510161169.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:49.463Z,1510161169.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:49.499Z,1510161169.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:49.873Z,1510161169.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:49.901Z,1510161169.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:50.274Z,1510161170.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:50.300Z,1510161170.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:50.674Z,1510161170.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:50.700Z,1510161170.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:51.064Z,1510161171.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:51.080Z,1510161171.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:54.150Z,1510161174.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:54.167Z,1510161174.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:54.249Z,1510161174.249 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T17:12:54.279Z,1510161174.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:54.341Z,1510161174.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:54.704Z,1510161174.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:54.720Z,1510161174.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:55.100Z,1510161175.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:55.117Z,1510161175.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:55.500Z,1510161175.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:55.517Z,1510161175.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:55.875Z,1510161175.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:55.911Z,1510161175.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:56.276Z,1510161176.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:56.301Z,1510161176.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:56.679Z,1510161176.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:56.743Z,1510161176.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:57.100Z,1510161177.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:57.117Z,1510161177.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:57.499Z,1510161177.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:57.523Z,1510161177.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:57.895Z,1510161177.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:57.912Z,1510161177.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:58.275Z,1510161178.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:58.301Z,1510161178.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:58.679Z,1510161178.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:58.712Z,1510161178.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:59.080Z,1510161179.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:59.111Z,1510161179.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:59.475Z,1510161179.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:59.507Z,1510161179.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:12:59.896Z,1510161179.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:12:59.912Z,1510161179.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:00.299Z,1510161180.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:00.316Z,1510161180.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:00.695Z,1510161180.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:00.711Z,1510161180.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:01.079Z,1510161181.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:01.111Z,1510161181.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:01.475Z,1510161181.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:01.500Z,1510161181.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:01.879Z,1510161181.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:01.905Z,1510161181.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:02.280Z,1510161182.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:02.312Z,1510161182.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:02.679Z,1510161182.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:02.709Z,1510161182.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:03.096Z,1510161183.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:03.112Z,1510161183.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:03.500Z,1510161183.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:03.516Z,1510161183.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:03.895Z,1510161183.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:03.912Z,1510161183.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:04.275Z,1510161184.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:04.304Z,1510161184.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:04.679Z,1510161184.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:04.712Z,1510161184.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:05.080Z,1510161185.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:05.113Z,1510161185.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:05.475Z,1510161185.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:05.506Z,1510161185.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:05.900Z,1510161185.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:05.917Z,1510161185.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:06.299Z,1510161186.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:06.316Z,1510161186.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:06.693Z,1510161186.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:06.722Z,1510161186.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:07.079Z,1510161187.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:07.104Z,1510161187.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:07.479Z,1510161187.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:07.512Z,1510161187.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:07.875Z,1510161187.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:07.929Z,1510161187.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:08.280Z,1510161188.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:08.306Z,1510161188.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:08.679Z,1510161188.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:08.704Z,1510161188.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:09.100Z,1510161189.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:09.161Z,1510161189.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:09.498Z,1510161189.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:09.515Z,1510161189.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:09.896Z,1510161189.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:09.953Z,1510161189.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:10.279Z,1510161190.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:10.310Z,1510161190.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:10.679Z,1510161190.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:10.727Z,1510161190.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:11.080Z,1510161191.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:11.114Z,1510161191.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:11.475Z,1510161191.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:11.510Z,1510161191.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:11.899Z,1510161191.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:11.916Z,1510161191.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:12.293Z,1510161192.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:12.328Z,1510161192.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:12.689Z,1510161192.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:12.715Z,1510161192.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:13.079Z,1510161193.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:13.113Z,1510161193.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:13.479Z,1510161193.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:13.514Z,1510161193.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:13.875Z,1510161193.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:13.917Z,1510161193.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:14.280Z,1510161194.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:14.317Z,1510161194.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:14.679Z,1510161194.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:14.719Z,1510161194.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:15.093Z,1510161195.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:15.121Z,1510161195.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:15.494Z,1510161195.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:15.520Z,1510161195.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:15.890Z,1510161195.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:15.922Z,1510161195.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:16.279Z,1510161196.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:16.295Z,1510161196.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:16.679Z,1510161196.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:16.699Z,1510161196.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:17.084Z,1510161197.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:17.124Z,1510161197.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:17.483Z,1510161197.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:17.498Z,1510161197.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:17.894Z,1510161197.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:17.926Z,1510161197.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:18.293Z,1510161198.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:18.328Z,1510161198.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:18.689Z,1510161198.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:18.705Z,1510161198.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:19.083Z,1510161199.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:19.135Z,1510161199.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:19.482Z,1510161199.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:19.499Z,1510161199.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:19.883Z,1510161199.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:19.899Z,1510161199.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:20.283Z,1510161200.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:20.304Z,1510161200.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:20.682Z,1510161200.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:20.699Z,1510161200.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:21.089Z,1510161201.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:21.105Z,1510161201.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:21.489Z,1510161201.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:21.506Z,1510161201.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:21.894Z,1510161201.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:21.926Z,1510161201.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:22.282Z,1510161202.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:22.299Z,1510161202.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:22.681Z,1510161202.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:22.698Z,1510161202.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:23.083Z,1510161203.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:23.100Z,1510161203.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:23.482Z,1510161203.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:23.498Z,1510161203.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:23.890Z,1510161203.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:23.907Z,1510161203.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:24.290Z,1510161204.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:24.306Z,1510161204.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:24.690Z,1510161204.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:24.707Z,1510161204.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:25.081Z,1510161205.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:25.098Z,1510161205.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:25.483Z,1510161205.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:25.504Z,1510161205.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:25.883Z,1510161205.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:25.899Z,1510161205.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:26.284Z,1510161206.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:26.300Z,1510161206.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:26.683Z,1510161206.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:26.704Z,1510161206.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:27.089Z,1510161207.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:27.107Z,1510161207.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:27.498Z,1510161207.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:27.528Z,1510161207.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:27.894Z,1510161207.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:27.926Z,1510161207.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:28.287Z,1510161208.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:28.307Z,1510161208.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:28.678Z,1510161208.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:28.703Z,1510161208.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:29.085Z,1510161209.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:29.117Z,1510161209.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:29.490Z,1510161209.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:29.506Z,1510161209.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:29.894Z,1510161209.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:29.959Z,1510161209.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:30.295Z,1510161210.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:30.315Z,1510161210.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:30.696Z,1510161210.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:30.758Z,1510161210.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:31.079Z,1510161211.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:31.103Z,1510161211.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:31.484Z,1510161211.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:31.506Z,1510161211.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:31.887Z,1510161211.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:31.937Z,1510161211.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:32.279Z,1510161212.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:32.303Z,1510161212.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:32.684Z,1510161212.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:32.743Z,1510161212.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:33.097Z,1510161213.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:33.141Z,1510161213.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:33.494Z,1510161213.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:33.516Z,1510161213.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:33.920Z,1510161213.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:33.955Z,1510161213.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:34.289Z,1510161214.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:34.304Z,1510161214.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:34.682Z,1510161214.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:34.714Z,1510161214.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:35.090Z,1510161215.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:35.139Z,1510161215.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:35.485Z,1510161215.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:35.540Z,1510161215.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:35.886Z,1510161215.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:35.902Z,1510161215.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:36.297Z,1510161216.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:36.328Z,1510161216.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:36.685Z,1510161216.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:36.707Z,1510161216.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:37.080Z,1510161217.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:37.096Z,1510161217.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:37.482Z,1510161217.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:37.498Z,1510161217.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:37.881Z,1510161217.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:37.897Z,1510161217.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:38.281Z,1510161218.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:38.297Z,1510161218.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:38.682Z,1510161218.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:38.698Z,1510161218.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:39.089Z,1510161219.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:39.128Z,1510161219.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:39.493Z,1510161219.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:39.526Z,1510161219.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:39.894Z,1510161219.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:39.926Z,1510161219.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:40.281Z,1510161220.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:40.297Z,1510161220.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:40.681Z,1510161220.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:40.697Z,1510161220.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:41.083Z,1510161221.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:41.136Z,1510161221.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:41.482Z,1510161221.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:41.497Z,1510161221.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:41.894Z,1510161221.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:41.926Z,1510161221.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:42.293Z,1510161222.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:42.326Z,1510161222.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:42.693Z,1510161222.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:42.709Z,1510161222.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:43.082Z,1510161223.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:43.098Z,1510161223.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:43.482Z,1510161223.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:43.498Z,1510161223.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:43.881Z,1510161223.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:43.903Z,1510161223.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:44.281Z,1510161224.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:44.297Z,1510161224.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:44.682Z,1510161224.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:44.698Z,1510161224.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:45.089Z,1510161225.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:45.106Z,1510161225.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:45.493Z,1510161225.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:45.510Z,1510161225.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:45.890Z,1510161225.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:45.906Z,1510161225.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:46.285Z,1510161226.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:46.301Z,1510161226.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:46.681Z,1510161226.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:46.703Z,1510161226.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:47.084Z,1510161227.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:47.104Z,1510161227.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:47.485Z,1510161227.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:47.500Z,1510161227.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:47.890Z,1510161227.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:47.906Z,1510161227.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:48.294Z,1510161228.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:48.310Z,1510161228.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:48.694Z,1510161228.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:48.715Z,1510161228.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:49.084Z,1510161229.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:49.107Z,1510161229.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:49.484Z,1510161229.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:49.507Z,1510161229.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:49.879Z,1510161229.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:49.909Z,1510161229.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:50.281Z,1510161230.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:50.301Z,1510161230.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:50.684Z,1510161230.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:50.708Z,1510161230.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:51.097Z,1510161231.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:51.139Z,1510161231.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:51.143Z,1510161231.143 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T17:08:50.9Z
2017-11-08T17:13:51.143Z,1510161231.143 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T17:13:51.143Z,1510161231.143 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T17:13:54.186Z,1510161234.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:54.278Z,1510161234.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:54.842Z,1510161234.842 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171108T132236/Courier0040.lzma
2017-11-08T17:13:54.884Z,1510161234.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:54.900Z,1510161234.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:55.011Z,1510161235.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:55.041Z,1510161235.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:55.411Z,1510161235.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:55.443Z,1510161235.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:55.785Z,1510161235.785 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0040.lzma.bak
2017-11-08T17:13:55.785Z,1510161235.785 [DataOverHttps](INFO): SBD MOMSN=5223068
2017-11-08T17:13:55.815Z,1510161235.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:55.872Z,1510161235.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:56.750Z,1510161236.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:56.767Z,1510161236.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:56.905Z,1510161236.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:56.956Z,1510161236.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:13:57.314Z,1510161237.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:13:57.336Z,1510161237.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:00.443Z,1510161240.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:00.460Z,1510161240.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:00.596Z,1510161240.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:00.639Z,1510161240.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:00.983Z,1510161240.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:01.000Z,1510161241.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:01.372Z,1510161241.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:01.407Z,1510161241.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:01.782Z,1510161241.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:01.804Z,1510161241.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:02.181Z,1510161242.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:02.196Z,1510161242.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:05.259Z,1510161245.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:05.312Z,1510161245.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:05.414Z,1510161245.414 [DataOverHttps](INFO): Sending 180 bytes from file Logs/20171108T132236/Express0041.lzma
2017-11-08T17:14:05.435Z,1510161245.435 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T17:14:05.435Z,1510161245.435 [NAL9602] Data Fault, FailCount= 2
2017-11-08T17:14:05.435Z,1510161245.435 [NAL9602](ERROR): Data Fault
2017-11-08T17:14:05.453Z,1510161245.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:05.507Z,1510161245.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:05.581Z,1510161245.581 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T17:14:05.818Z,1510161245.818 [NAL9602](INFO): Powering down
2017-11-08T17:14:05.844Z,1510161245.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:05.876Z,1510161245.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:06.214Z,1510161246.214 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0041.lzma.bak
2017-11-08T17:14:06.214Z,1510161246.214 [DataOverHttps](INFO): SBD MOMSN=5223070
2017-11-08T17:14:06.258Z,1510161246.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:06.280Z,1510161246.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:07.188Z,1510161247.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:07.204Z,1510161247.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:07.207Z,1510161247.207 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T17:14:07.207Z,1510161247.207 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T17:14:07.207Z,1510161247.207 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T17:14:07.292Z,1510161247.292 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T17:14:07.293Z,1510161247.293 [NAL9602] No Fault, FailCount= 2
2017-11-08T17:14:07.319Z,1510161247.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:07.359Z,1510161247.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:10.424Z,1510161250.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:10.452Z,1510161250.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:10.571Z,1510161250.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:10.631Z,1510161250.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:10.967Z,1510161250.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:10.983Z,1510161250.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:11.371Z,1510161251.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:11.405Z,1510161251.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:11.770Z,1510161251.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:11.786Z,1510161251.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:12.167Z,1510161252.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:12.204Z,1510161252.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:12.570Z,1510161252.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:12.587Z,1510161252.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:12.970Z,1510161252.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:12.987Z,1510161252.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:13.370Z,1510161253.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:13.386Z,1510161253.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:13.767Z,1510161253.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:13.787Z,1510161253.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:14.167Z,1510161254.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:14.292Z,1510161254.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:14.566Z,1510161254.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:14.583Z,1510161254.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:14.967Z,1510161254.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:15.041Z,1510161255.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:15.366Z,1510161255.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:15.383Z,1510161255.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:15.766Z,1510161255.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:15.834Z,1510161255.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:16.171Z,1510161256.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:16.188Z,1510161256.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:16.566Z,1510161256.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:16.623Z,1510161256.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:16.966Z,1510161256.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:16.987Z,1510161256.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:17.367Z,1510161257.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:17.419Z,1510161257.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:17.763Z,1510161257.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:17.780Z,1510161257.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:18.163Z,1510161258.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:18.179Z,1510161258.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:18.567Z,1510161258.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:18.606Z,1510161258.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:18.963Z,1510161258.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:18.979Z,1510161258.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:19.367Z,1510161259.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:19.383Z,1510161259.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:19.767Z,1510161259.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:19.804Z,1510161259.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:20.167Z,1510161260.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:20.183Z,1510161260.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:20.563Z,1510161260.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:20.579Z,1510161260.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:20.967Z,1510161260.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:20.987Z,1510161260.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:21.371Z,1510161261.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:21.387Z,1510161261.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:21.771Z,1510161261.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:21.791Z,1510161261.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:22.171Z,1510161262.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:22.191Z,1510161262.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:22.570Z,1510161262.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:22.586Z,1510161262.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:22.971Z,1510161262.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:22.987Z,1510161262.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:23.371Z,1510161263.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:23.387Z,1510161263.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:23.770Z,1510161263.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:23.787Z,1510161263.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:24.171Z,1510161264.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:24.191Z,1510161264.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:24.566Z,1510161264.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:24.583Z,1510161264.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:24.966Z,1510161264.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:24.983Z,1510161264.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:25.371Z,1510161265.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:25.387Z,1510161265.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:25.771Z,1510161265.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:25.824Z,1510161265.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:26.170Z,1510161266.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:26.187Z,1510161266.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:26.572Z,1510161266.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:26.591Z,1510161266.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:26.972Z,1510161266.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:26.988Z,1510161266.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:27.366Z,1510161267.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:27.388Z,1510161267.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:27.771Z,1510161267.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:27.786Z,1510161267.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:28.168Z,1510161268.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:28.185Z,1510161268.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:28.566Z,1510161268.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:28.583Z,1510161268.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:28.971Z,1510161268.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:28.987Z,1510161268.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:29.365Z,1510161269.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:29.383Z,1510161269.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:29.766Z,1510161269.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:29.783Z,1510161269.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:30.165Z,1510161270.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:30.183Z,1510161270.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:30.571Z,1510161270.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:30.587Z,1510161270.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:30.966Z,1510161270.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:30.982Z,1510161270.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:31.370Z,1510161271.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:31.386Z,1510161271.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:31.766Z,1510161271.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:31.782Z,1510161271.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:32.166Z,1510161272.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:32.183Z,1510161272.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:32.571Z,1510161272.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:32.587Z,1510161272.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:32.971Z,1510161272.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:32.987Z,1510161272.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:33.366Z,1510161273.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:33.387Z,1510161273.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:33.771Z,1510161273.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:33.791Z,1510161273.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:34.171Z,1510161274.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:34.187Z,1510161274.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:34.566Z,1510161274.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:34.587Z,1510161274.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:34.971Z,1510161274.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:34.987Z,1510161274.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:35.375Z,1510161275.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:35.391Z,1510161275.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:35.771Z,1510161275.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:35.788Z,1510161275.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:36.155Z,1510161276.155 [NAL9602](INFO): Powering up NAL9602
2017-11-08T17:14:36.173Z,1510161276.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:36.189Z,1510161276.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:36.572Z,1510161276.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:36.659Z,1510161276.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:36.970Z,1510161276.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:36.990Z,1510161276.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:37.371Z,1510161277.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:37.420Z,1510161277.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:37.771Z,1510161277.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:37.787Z,1510161277.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:38.168Z,1510161278.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:38.223Z,1510161278.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:38.571Z,1510161278.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:38.587Z,1510161278.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:38.968Z,1510161278.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:38.985Z,1510161278.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:39.368Z,1510161279.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:39.386Z,1510161279.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:39.770Z,1510161279.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:39.786Z,1510161279.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:40.167Z,1510161280.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:40.184Z,1510161280.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:40.568Z,1510161280.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:40.585Z,1510161280.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:40.970Z,1510161280.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:40.986Z,1510161280.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:41.368Z,1510161281.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:41.384Z,1510161281.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:41.770Z,1510161281.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:41.786Z,1510161281.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:42.170Z,1510161282.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:42.186Z,1510161282.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:42.573Z,1510161282.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:42.588Z,1510161282.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:42.974Z,1510161282.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:42.990Z,1510161282.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:43.371Z,1510161283.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:43.387Z,1510161283.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:43.768Z,1510161283.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:43.785Z,1510161283.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:44.173Z,1510161284.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:44.189Z,1510161284.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:44.573Z,1510161284.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:44.588Z,1510161284.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:44.968Z,1510161284.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:44.984Z,1510161284.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:45.373Z,1510161285.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:45.389Z,1510161285.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:45.773Z,1510161285.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:45.795Z,1510161285.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:46.168Z,1510161286.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:46.185Z,1510161286.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:46.573Z,1510161286.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:46.627Z,1510161286.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:46.978Z,1510161286.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:46.994Z,1510161286.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:47.350Z,1510161287.350 [NAL9602](INFO): NAL9602 initialized
2017-11-08T17:14:47.378Z,1510161287.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:47.394Z,1510161287.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:47.773Z,1510161287.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:47.789Z,1510161287.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:48.182Z,1510161288.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:48.198Z,1510161288.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:48.582Z,1510161288.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:48.599Z,1510161288.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:48.979Z,1510161288.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:48.000Z,1510161289.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:49.374Z,1510161289.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:49.389Z,1510161289.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:49.767Z,1510161289.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:49.796Z,1510161289.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:50.167Z,1510161290.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:50.192Z,1510161290.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:50.575Z,1510161290.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:50.591Z,1510161290.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:50.979Z,1510161290.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:50.999Z,1510161290.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:51.387Z,1510161291.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:51.407Z,1510161291.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:51.786Z,1510161291.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:51.823Z,1510161291.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:52.163Z,1510161292.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:52.194Z,1510161292.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:52.563Z,1510161292.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:52.589Z,1510161292.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:52.973Z,1510161292.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:52.998Z,1510161292.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:53.363Z,1510161293.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:53.395Z,1510161293.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:53.781Z,1510161293.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:53.798Z,1510161293.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:54.189Z,1510161294.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:54.206Z,1510161294.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:54.582Z,1510161294.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:54.612Z,1510161294.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:54.969Z,1510161294.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:54.997Z,1510161294.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:55.368Z,1510161295.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:55.395Z,1510161295.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:55.785Z,1510161295.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:55.801Z,1510161295.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:56.189Z,1510161296.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:56.205Z,1510161296.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:56.589Z,1510161296.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:56.606Z,1510161296.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:56.968Z,1510161296.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:56.999Z,1510161296.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:57.367Z,1510161297.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:57.400Z,1510161297.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:57.790Z,1510161297.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:57.860Z,1510161297.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:58.182Z,1510161298.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:58.212Z,1510161298.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:58.585Z,1510161298.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:58.608Z,1510161298.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:58.969Z,1510161298.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:59.002Z,1510161299.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:59.363Z,1510161299.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:59.396Z,1510161299.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:14:59.778Z,1510161299.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:14:59.811Z,1510161299.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:00.186Z,1510161300.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:00.209Z,1510161300.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:00.578Z,1510161300.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:00.608Z,1510161300.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:00.968Z,1510161300.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:01.001Z,1510161301.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:01.368Z,1510161301.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:01.393Z,1510161301.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:01.778Z,1510161301.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:01.786Z,1510161301.786 [BPC1](ERROR): Failed to receive battery data
2017-11-08T17:15:01.787Z,1510161301.787 [BPC1] Communications Fault, FailCount= 1
2017-11-08T17:15:01.787Z,1510161301.787 [BPC1](ERROR): Communications Fault
2017-11-08T17:15:01.825Z,1510161301.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:01.901Z,1510161301.901 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T17:15:02.182Z,1510161302.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:02.208Z,1510161302.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:02.582Z,1510161302.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:02.608Z,1510161302.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:02.968Z,1510161302.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:03.011Z,1510161303.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:03.098Z,1510161303.098 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T17:15:03.098Z,1510161303.098 [BPC1] No Fault, FailCount= 1
2017-11-08T17:15:03.367Z,1510161303.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:03.450Z,1510161303.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:03.786Z,1510161303.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:03.819Z,1510161303.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:04.186Z,1510161304.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:04.216Z,1510161304.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:04.582Z,1510161304.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:04.614Z,1510161304.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:04.971Z,1510161304.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:04.999Z,1510161304.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:05.371Z,1510161305.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:05.391Z,1510161305.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:05.777Z,1510161305.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:05.817Z,1510161305.817 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:05.817Z,1510161305.817 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77
2017-11-08T17:15:05.817Z,1510161305.817 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T17:15:05.819Z,1510161305.819 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:05.819Z,1510161305.819 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77
2017-11-08T17:15:05.819Z,1510161305.819 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T17:15:05.821Z,1510161305.821 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:05.821Z,1510161305.821 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 77
2017-11-08T17:15:05.821Z,1510161305.821 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T17:15:05.897Z,1510161305.897 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T17:15:05.897Z,1510161305.897 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T17:15:05.897Z,1510161305.897 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T17:15:06.182Z,1510161306.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:06.285Z,1510161306.285 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T17:15:06.285Z,1510161306.285 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77
2017-11-08T17:15:06.285Z,1510161306.285 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T17:15:06.285Z,1510161306.285 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77
2017-11-08T17:15:06.286Z,1510161306.286 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T17:15:06.286Z,1510161306.286 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 77
2017-11-08T17:15:06.576Z,1510161306.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:06.591Z,1510161306.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T17:15:06.591Z,1510161306.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:15:06.591Z,1510161306.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:15:06.592Z,1510161306.592 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T17:15:06.592Z,1510161306.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:15:06.593Z,1510161306.593 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:15:06.593Z,1510161306.593 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T17:15:06.594Z,1510161306.594 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:15:06.594Z,1510161306.594 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:15:06.971Z,1510161306.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:06.986Z,1510161306.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T17:15:06.987Z,1510161306.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:07.379Z,1510161307.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:07.399Z,1510161307.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T17:15:07.400Z,1510161307.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:07.783Z,1510161307.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:07.800Z,1510161307.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T17:15:07.801Z,1510161307.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:10.871Z,1510161310.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:10.887Z,1510161310.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2017-11-08T17:15:10.888Z,1510161310.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:11.021Z,1510161311.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:11.055Z,1510161311.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T17:15:11.056Z,1510161311.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:11.399Z,1510161311.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:11.431Z,1510161311.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T17:15:11.432Z,1510161311.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:11.794Z,1510161311.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:11.847Z,1510161311.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T17:15:11.848Z,1510161311.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:12.196Z,1510161312.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:12.228Z,1510161312.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T17:15:12.229Z,1510161312.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:12.599Z,1510161312.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:12.637Z,1510161312.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T17:15:12.638Z,1510161312.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:13.021Z,1510161313.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:13.038Z,1510161313.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T17:15:13.039Z,1510161313.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:13.409Z,1510161313.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:13.443Z,1510161313.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T17:15:13.444Z,1510161313.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:13.809Z,1510161313.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:13.840Z,1510161313.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T17:15:13.841Z,1510161313.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:14.192Z,1510161314.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:14.207Z,1510161314.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T17:15:14.209Z,1510161314.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:14.595Z,1510161314.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:14.611Z,1510161314.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T17:15:14.612Z,1510161314.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:14.999Z,1510161314.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:15.015Z,1510161315.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T17:15:15.016Z,1510161315.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:15.399Z,1510161315.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:15.415Z,1510161315.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T17:15:15.416Z,1510161315.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:15.814Z,1510161315.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:15.838Z,1510161315.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T17:15:15.839Z,1510161315.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:16.217Z,1510161316.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:16.239Z,1510161316.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T17:15:16.240Z,1510161316.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:16.617Z,1510161316.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:16.641Z,1510161316.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T17:15:16.642Z,1510161316.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:16.999Z,1510161316.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:17.015Z,1510161317.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T17:15:17.016Z,1510161317.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:17.399Z,1510161317.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:17.414Z,1510161317.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T17:15:17.415Z,1510161317.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:17.796Z,1510161317.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:17.811Z,1510161317.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T17:15:17.813Z,1510161317.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:18.201Z,1510161318.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:18.217Z,1510161318.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T17:15:18.218Z,1510161318.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:18.600Z,1510161318.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:18.615Z,1510161318.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T17:15:18.616Z,1510161318.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:19.010Z,1510161319.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:19.045Z,1510161319.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T17:15:19.046Z,1510161319.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:19.414Z,1510161319.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:19.443Z,1510161319.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T17:15:19.444Z,1510161319.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:19.810Z,1510161319.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:19.840Z,1510161319.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T17:15:19.841Z,1510161319.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:20.200Z,1510161320.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:20.217Z,1510161320.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T17:15:20.218Z,1510161320.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:20.599Z,1510161320.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:20.616Z,1510161320.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T17:15:20.617Z,1510161320.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:21.000Z,1510161321.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:21.020Z,1510161321.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T17:15:21.044Z,1510161321.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:21.399Z,1510161321.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:21.416Z,1510161321.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T17:15:21.418Z,1510161321.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:21.814Z,1510161321.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:21.844Z,1510161321.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T17:15:21.845Z,1510161321.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:22.214Z,1510161322.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:22.244Z,1510161322.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T17:15:22.245Z,1510161322.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:22.613Z,1510161322.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:22.683Z,1510161322.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T17:15:22.684Z,1510161322.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:22.999Z,1510161322.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:23.020Z,1510161323.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T17:15:23.021Z,1510161323.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:23.398Z,1510161323.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:23.414Z,1510161323.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T17:15:23.415Z,1510161323.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:23.798Z,1510161323.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:23.862Z,1510161323.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T17:15:23.863Z,1510161323.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:24.206Z,1510161324.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:24.222Z,1510161324.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T17:15:24.223Z,1510161324.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:24.604Z,1510161324.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:24.620Z,1510161324.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T17:15:24.621Z,1510161324.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:25.013Z,1510161325.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:25.060Z,1510161325.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T17:15:25.062Z,1510161325.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:25.414Z,1510161325.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:25.429Z,1510161325.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T17:15:25.430Z,1510161325.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:25.809Z,1510161325.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:25.855Z,1510161325.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:26.202Z,1510161326.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:26.219Z,1510161326.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:26.604Z,1510161326.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:26.621Z,1510161326.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:27.005Z,1510161327.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:27.021Z,1510161327.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:27.402Z,1510161327.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:27.418Z,1510161327.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:27.810Z,1510161327.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:27.826Z,1510161327.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:28.214Z,1510161328.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:28.284Z,1510161328.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:28.613Z,1510161328.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:28.659Z,1510161328.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:29.004Z,1510161329.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:29.021Z,1510161329.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:29.404Z,1510161329.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:29.420Z,1510161329.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:29.799Z,1510161329.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:29.815Z,1510161329.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:30.206Z,1510161330.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:30.222Z,1510161330.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:30.603Z,1510161330.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:30.618Z,1510161330.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:31.007Z,1510161331.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:31.023Z,1510161331.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:31.413Z,1510161331.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:31.430Z,1510161331.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:31.809Z,1510161331.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:31.825Z,1510161331.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:32.199Z,1510161332.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:32.215Z,1510161332.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:32.601Z,1510161332.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:32.617Z,1510161332.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:33.005Z,1510161333.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:33.021Z,1510161333.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:33.405Z,1510161333.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:33.421Z,1510161333.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:33.810Z,1510161333.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:33.826Z,1510161333.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:34.216Z,1510161334.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:34.261Z,1510161334.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:34.613Z,1510161334.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:34.632Z,1510161334.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:35.005Z,1510161335.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:35.021Z,1510161335.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:35.402Z,1510161335.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:35.418Z,1510161335.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:35.805Z,1510161335.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:35.821Z,1510161335.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:36.206Z,1510161336.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:36.222Z,1510161336.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:36.601Z,1510161336.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:36.617Z,1510161336.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:37.007Z,1510161337.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:37.024Z,1510161337.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:37.413Z,1510161337.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:37.430Z,1510161337.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:37.809Z,1510161337.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:37.831Z,1510161337.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:38.199Z,1510161338.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:38.215Z,1510161338.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:38.605Z,1510161338.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:38.621Z,1510161338.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:39.005Z,1510161339.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:39.021Z,1510161339.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:39.405Z,1510161339.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:39.421Z,1510161339.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:39.810Z,1510161339.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:39.826Z,1510161339.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:40.212Z,1510161340.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:40.228Z,1510161340.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:40.613Z,1510161340.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:40.630Z,1510161340.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:40.999Z,1510161340.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:41.020Z,1510161341.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:41.404Z,1510161341.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:41.420Z,1510161341.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:41.795Z,1510161341.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:41.828Z,1510161341.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:42.200Z,1510161342.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:42.233Z,1510161342.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:42.599Z,1510161342.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:42.623Z,1510161342.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:43.016Z,1510161343.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:43.033Z,1510161343.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:43.420Z,1510161343.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:43.436Z,1510161343.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:43.815Z,1510161343.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:43.835Z,1510161343.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:44.199Z,1510161344.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:44.226Z,1510161344.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:44.599Z,1510161344.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:44.632Z,1510161344.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:44.999Z,1510161344.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:45.044Z,1510161345.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:45.399Z,1510161345.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:45.427Z,1510161345.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:45.820Z,1510161345.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:45.844Z,1510161345.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:46.220Z,1510161346.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:46.243Z,1510161346.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:46.621Z,1510161346.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:46.637Z,1510161346.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:46.996Z,1510161346.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:47.047Z,1510161347.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:47.396Z,1510161347.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:47.431Z,1510161347.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:47.799Z,1510161347.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:47.827Z,1510161347.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:48.197Z,1510161348.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:48.255Z,1510161348.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:48.595Z,1510161348.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:48.625Z,1510161348.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:49.014Z,1510161349.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:49.073Z,1510161349.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:49.421Z,1510161349.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:49.437Z,1510161349.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:49.813Z,1510161349.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:49.835Z,1510161349.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:50.192Z,1510161350.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:50.217Z,1510161350.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:50.599Z,1510161350.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:50.631Z,1510161350.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:50.999Z,1510161350.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:51.030Z,1510161351.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:51.399Z,1510161351.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:51.431Z,1510161351.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:51.816Z,1510161351.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:51.833Z,1510161351.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:52.216Z,1510161352.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:52.232Z,1510161352.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:52.620Z,1510161352.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:52.637Z,1510161352.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:52.999Z,1510161352.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:53.030Z,1510161353.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:53.399Z,1510161353.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:53.429Z,1510161353.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:53.792Z,1510161353.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:53.808Z,1510161353.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:54.196Z,1510161354.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:54.212Z,1510161354.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:54.595Z,1510161354.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:54.615Z,1510161354.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:55.005Z,1510161355.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:55.034Z,1510161355.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:55.413Z,1510161355.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:55.440Z,1510161355.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:55.809Z,1510161355.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:55.840Z,1510161355.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:56.194Z,1510161356.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:56.211Z,1510161356.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:56.601Z,1510161356.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:56.617Z,1510161356.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:57.001Z,1510161357.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:57.017Z,1510161357.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:57.396Z,1510161357.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:57.451Z,1510161357.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:57.814Z,1510161357.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:57.838Z,1510161357.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:58.214Z,1510161358.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:58.243Z,1510161358.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:58.615Z,1510161358.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:58.640Z,1510161358.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:58.999Z,1510161358.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:59.017Z,1510161359.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:59.397Z,1510161359.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:59.416Z,1510161359.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:15:59.797Z,1510161359.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:15:59.815Z,1510161359.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:00.200Z,1510161360.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:00.245Z,1510161360.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:00.599Z,1510161360.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:00.614Z,1510161360.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:01.005Z,1510161361.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:01.022Z,1510161361.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:01.413Z,1510161361.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:01.446Z,1510161361.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:01.813Z,1510161361.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:01.829Z,1510161361.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:02.199Z,1510161362.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:02.215Z,1510161362.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:02.603Z,1510161362.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:02.619Z,1510161362.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:03.003Z,1510161363.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:03.018Z,1510161363.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:03.402Z,1510161363.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:03.418Z,1510161363.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:03.814Z,1510161363.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:03.830Z,1510161363.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:04.213Z,1510161364.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:04.229Z,1510161364.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:04.613Z,1510161364.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:04.630Z,1510161364.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:05.005Z,1510161365.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:05.021Z,1510161365.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:05.401Z,1510161365.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:05.423Z,1510161365.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:05.805Z,1510161365.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:05.822Z,1510161365.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:06.206Z,1510161366.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:06.222Z,1510161366.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:06.605Z,1510161366.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:06.627Z,1510161366.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:07.011Z,1510161367.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:07.028Z,1510161367.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:07.414Z,1510161367.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:07.430Z,1510161367.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:07.811Z,1510161367.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:07.832Z,1510161367.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:10.886Z,1510161370.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:10.977Z,1510161370.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:11.105Z,1510161371.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:11.141Z,1510161371.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:11.511Z,1510161371.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:11.531Z,1510161371.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:11.912Z,1510161371.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:11.967Z,1510161371.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:12.311Z,1510161372.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:12.327Z,1510161372.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:12.691Z,1510161372.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:12.766Z,1510161372.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:13.088Z,1510161373.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:13.114Z,1510161373.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:13.491Z,1510161373.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:13.523Z,1510161373.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:13.907Z,1510161373.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:13.930Z,1510161373.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:14.308Z,1510161374.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:14.324Z,1510161374.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:14.711Z,1510161374.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:14.727Z,1510161374.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:15.091Z,1510161375.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:15.115Z,1510161375.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:15.487Z,1510161375.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:15.520Z,1510161375.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:15.887Z,1510161375.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:15.920Z,1510161375.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:16.292Z,1510161376.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:16.325Z,1510161376.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:16.687Z,1510161376.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:16.711Z,1510161376.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:17.102Z,1510161377.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:17.131Z,1510161377.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:17.501Z,1510161377.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:17.533Z,1510161377.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:17.901Z,1510161377.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:17.935Z,1510161377.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:18.291Z,1510161378.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:18.325Z,1510161378.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:18.691Z,1510161378.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:18.726Z,1510161378.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:19.088Z,1510161379.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:19.104Z,1510161379.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:19.491Z,1510161379.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:19.531Z,1510161379.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:19.902Z,1510161379.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:19.927Z,1510161379.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:20.301Z,1510161380.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:20.330Z,1510161380.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:20.418Z,1510161380.418 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:16:20.418Z,1510161380.418 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T17:16:20.633Z,1510161380.633 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:16:20.633Z,1510161380.633 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:16:20.633Z,1510161380.633 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:16:20.633Z,1510161380.633 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T17:16:20.633Z,1510161380.633 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:16:20.720Z,1510161380.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:20.736Z,1510161380.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:20.809Z,1510161380.809 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:16:21.037Z,1510161381.037 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:16:21.098Z,1510161381.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:21.173Z,1510161381.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:21.221Z,1510161381.221 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:16:21.491Z,1510161381.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:21.508Z,1510161381.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:21.896Z,1510161381.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:21.929Z,1510161381.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:22.296Z,1510161382.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:22.313Z,1510161382.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:22.694Z,1510161382.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:22.711Z,1510161382.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:22.801Z,1510161382.801 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:16:22.801Z,1510161382.801 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T17:16:22.837Z,1510161382.837 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:16:22.837Z,1510161382.837 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:16:22.837Z,1510161382.837 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:16:22.838Z,1510161382.838 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T17:16:22.838Z,1510161382.838 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:16:23.106Z,1510161383.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:23.134Z,1510161383.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:23.224Z,1510161383.224 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:16:23.241Z,1510161383.241 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:16:23.334Z,1510161383.334 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:16:23.514Z,1510161383.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:23.540Z,1510161383.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:23.902Z,1510161383.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:23.934Z,1510161383.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:24.294Z,1510161384.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:24.311Z,1510161384.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:24.694Z,1510161384.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:24.711Z,1510161384.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:24.809Z,1510161384.809 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:16:24.809Z,1510161384.809 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T17:16:24.949Z,1510161384.949 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:16:24.949Z,1510161384.949 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:16:24.949Z,1510161384.949 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:16:24.949Z,1510161384.949 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T17:16:24.949Z,1510161384.949 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:16:25.090Z,1510161385.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:25.107Z,1510161385.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:25.185Z,1510161385.185 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:16:25.353Z,1510161385.353 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:16:25.441Z,1510161385.441 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:16:25.500Z,1510161385.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:25.519Z,1510161385.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:25.906Z,1510161385.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:25.922Z,1510161385.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:26.305Z,1510161386.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:26.322Z,1510161386.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:26.710Z,1510161386.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:26.747Z,1510161386.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:26.837Z,1510161386.837 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:16:26.837Z,1510161386.837 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T17:16:27.057Z,1510161387.057 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:16:27.057Z,1510161387.057 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:16:27.057Z,1510161387.057 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:16:27.057Z,1510161387.057 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T17:16:27.058Z,1510161387.058 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:16:27.099Z,1510161387.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:27.131Z,1510161387.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:27.217Z,1510161387.217 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:16:27.461Z,1510161387.461 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:16:27.526Z,1510161387.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:27.572Z,1510161387.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:27.663Z,1510161387.663 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:16:27.898Z,1510161387.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:27.915Z,1510161387.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:28.298Z,1510161388.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:28.315Z,1510161388.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:28.698Z,1510161388.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:28.715Z,1510161388.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:29.110Z,1510161389.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:29.127Z,1510161389.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:29.213Z,1510161389.213 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:16:29.213Z,1510161389.213 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T17:16:29.277Z,1510161389.277 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:16:29.277Z,1510161389.277 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:16:29.278Z,1510161389.278 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:16:29.278Z,1510161389.278 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T17:16:29.278Z,1510161389.278 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:16:29.508Z,1510161389.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:29.524Z,1510161389.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:29.605Z,1510161389.605 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:16:29.605Z,1510161389.605 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:16:29.681Z,1510161389.681 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:16:29.766Z,1510161389.766 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:16:29.912Z,1510161389.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:29.931Z,1510161389.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:30.298Z,1510161390.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:30.315Z,1510161390.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:30.698Z,1510161390.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:30.716Z,1510161390.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:31.088Z,1510161391.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:31.123Z,1510161391.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:31.498Z,1510161391.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:31.519Z,1510161391.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:31.911Z,1510161391.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:31.983Z,1510161391.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:32.312Z,1510161392.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:32.329Z,1510161392.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:32.706Z,1510161392.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:32.764Z,1510161392.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:33.095Z,1510161393.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:33.121Z,1510161393.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:33.488Z,1510161393.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:33.525Z,1510161393.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:33.893Z,1510161393.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:33.948Z,1510161393.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:34.289Z,1510161394.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:34.317Z,1510161394.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:34.692Z,1510161394.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:34.740Z,1510161394.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:35.102Z,1510161395.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:35.135Z,1510161395.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:35.502Z,1510161395.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:35.534Z,1510161395.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:35.902Z,1510161395.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:35.934Z,1510161395.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:36.292Z,1510161396.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:36.317Z,1510161396.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:36.687Z,1510161396.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:36.704Z,1510161396.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:37.088Z,1510161397.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:37.105Z,1510161397.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:37.487Z,1510161397.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:37.507Z,1510161397.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:37.897Z,1510161397.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:37.926Z,1510161397.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:38.309Z,1510161398.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:38.338Z,1510161398.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:38.710Z,1510161398.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:38.737Z,1510161398.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:39.095Z,1510161399.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:39.111Z,1510161399.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:39.491Z,1510161399.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:39.508Z,1510161399.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:39.892Z,1510161399.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:39.908Z,1510161399.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:40.292Z,1510161400.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:40.308Z,1510161400.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:40.692Z,1510161400.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:40.708Z,1510161400.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:41.106Z,1510161401.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:41.138Z,1510161401.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:41.509Z,1510161401.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:41.536Z,1510161401.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:41.910Z,1510161401.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:41.936Z,1510161401.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:42.294Z,1510161402.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:42.310Z,1510161402.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:42.695Z,1510161402.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:42.711Z,1510161402.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:43.097Z,1510161403.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:43.144Z,1510161403.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:43.492Z,1510161403.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:43.509Z,1510161403.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:43.902Z,1510161403.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:43.940Z,1510161403.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:44.310Z,1510161404.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:44.344Z,1510161404.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:44.710Z,1510161404.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:44.736Z,1510161404.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:45.096Z,1510161405.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:45.113Z,1510161405.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:45.492Z,1510161405.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:45.510Z,1510161405.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:45.896Z,1510161405.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:45.914Z,1510161405.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:46.290Z,1510161406.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:46.308Z,1510161406.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:46.690Z,1510161406.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:46.707Z,1510161406.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:47.106Z,1510161407.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:47.138Z,1510161407.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:47.505Z,1510161407.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:47.536Z,1510161407.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:47.901Z,1510161407.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:47.930Z,1510161407.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:48.294Z,1510161408.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:48.355Z,1510161408.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:48.691Z,1510161408.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:48.721Z,1510161408.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:49.098Z,1510161409.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:49.114Z,1510161409.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:49.496Z,1510161409.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:49.519Z,1510161409.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:49.898Z,1510161409.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:49.919Z,1510161409.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:50.301Z,1510161410.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:50.317Z,1510161410.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:50.706Z,1510161410.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:50.722Z,1510161410.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:51.093Z,1510161411.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:51.109Z,1510161411.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:51.497Z,1510161411.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:51.513Z,1510161411.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:51.891Z,1510161411.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:51.921Z,1510161411.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:52.294Z,1510161412.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:52.309Z,1510161412.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:52.697Z,1510161412.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:52.713Z,1510161412.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:53.106Z,1510161413.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:53.122Z,1510161413.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:53.501Z,1510161413.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:53.523Z,1510161413.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:53.905Z,1510161413.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:53.922Z,1510161413.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:54.297Z,1510161414.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:54.313Z,1510161414.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:54.693Z,1510161414.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:54.761Z,1510161414.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:55.098Z,1510161415.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:55.114Z,1510161415.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:55.497Z,1510161415.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:55.547Z,1510161415.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:55.898Z,1510161415.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:55.919Z,1510161415.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:56.305Z,1510161416.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:56.351Z,1510161416.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:56.702Z,1510161416.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:56.718Z,1510161416.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:57.093Z,1510161417.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:57.109Z,1510161417.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:57.497Z,1510161417.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:57.514Z,1510161417.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:57.897Z,1510161417.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:57.913Z,1510161417.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:58.293Z,1510161418.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:58.315Z,1510161418.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:58.697Z,1510161418.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:58.713Z,1510161418.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:59.106Z,1510161419.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:59.122Z,1510161419.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:59.501Z,1510161419.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:59.523Z,1510161419.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:16:59.906Z,1510161419.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:16:59.922Z,1510161419.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:00.296Z,1510161420.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:00.313Z,1510161420.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:00.693Z,1510161420.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:00.709Z,1510161420.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:01.098Z,1510161421.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:01.114Z,1510161421.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:01.490Z,1510161421.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:01.519Z,1510161421.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:01.899Z,1510161421.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:01.915Z,1510161421.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:02.306Z,1510161422.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:02.322Z,1510161422.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:02.706Z,1510161422.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:02.743Z,1510161422.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:03.096Z,1510161423.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:03.111Z,1510161423.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:03.497Z,1510161423.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:03.513Z,1510161423.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:03.897Z,1510161423.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:03.913Z,1510161423.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:04.294Z,1510161424.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:04.309Z,1510161424.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:04.696Z,1510161424.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:04.747Z,1510161424.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:05.106Z,1510161425.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:05.122Z,1510161425.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:05.501Z,1510161425.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:05.523Z,1510161425.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:05.906Z,1510161425.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:05.922Z,1510161425.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:06.297Z,1510161426.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:06.313Z,1510161426.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:06.693Z,1510161426.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:06.709Z,1510161426.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:07.098Z,1510161427.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:07.114Z,1510161427.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:07.498Z,1510161427.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:07.515Z,1510161427.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:07.901Z,1510161427.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:07.917Z,1510161427.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:10.999Z,1510161430.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:11.016Z,1510161431.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:11.152Z,1510161431.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:11.190Z,1510161431.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:11.527Z,1510161431.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:11.562Z,1510161431.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:11.939Z,1510161431.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:11.956Z,1510161431.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:12.327Z,1510161432.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:12.360Z,1510161432.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:12.739Z,1510161432.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:12.755Z,1510161432.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:13.148Z,1510161433.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:13.172Z,1510161433.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:13.547Z,1510161433.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:13.567Z,1510161433.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:13.928Z,1510161433.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:13.954Z,1510161433.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:14.328Z,1510161434.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:14.354Z,1510161434.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:14.747Z,1510161434.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:14.771Z,1510161434.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:15.144Z,1510161435.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:15.160Z,1510161435.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:15.548Z,1510161435.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:15.556Z,1510161435.556 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-08T17:17:15.557Z,1510161435.557 [BPC1] Data Fault, FailCount= 1
2017-11-08T17:17:15.557Z,1510161435.557 [BPC1](ERROR): Data Fault
2017-11-08T17:17:15.566Z,1510161435.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:15.665Z,1510161435.665 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T17:17:15.924Z,1510161435.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:15.950Z,1510161435.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:16.328Z,1510161436.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:16.352Z,1510161436.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:16.723Z,1510161436.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:16.755Z,1510161436.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:16.834Z,1510161436.834 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T17:17:16.834Z,1510161436.834 [BPC1] No Fault, FailCount= 1
2017-11-08T17:17:17.147Z,1510161437.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:17.218Z,1510161437.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:17.548Z,1510161437.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:17.564Z,1510161437.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:17.945Z,1510161437.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:17.961Z,1510161437.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:18.327Z,1510161438.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:18.360Z,1510161438.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:18.723Z,1510161438.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:18.755Z,1510161438.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:19.128Z,1510161439.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:19.155Z,1510161439.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:19.527Z,1510161439.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:19.559Z,1510161439.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:19.943Z,1510161439.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:19.960Z,1510161439.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:20.344Z,1510161440.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:20.361Z,1510161440.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:20.748Z,1510161440.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:20.764Z,1510161440.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:21.127Z,1510161441.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:21.151Z,1510161441.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:21.523Z,1510161441.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:21.555Z,1510161441.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:21.928Z,1510161441.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:21.953Z,1510161441.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:22.327Z,1510161442.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:22.351Z,1510161442.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:22.744Z,1510161442.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:22.761Z,1510161442.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:23.152Z,1510161443.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:23.168Z,1510161443.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:23.547Z,1510161443.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:23.563Z,1510161443.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:23.925Z,1510161443.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:23.957Z,1510161443.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:24.328Z,1510161444.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:24.363Z,1510161444.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:24.745Z,1510161444.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:24.760Z,1510161444.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:25.145Z,1510161445.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:25.162Z,1510161445.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:25.553Z,1510161445.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:25.611Z,1510161445.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:25.928Z,1510161445.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:25.960Z,1510161445.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:26.327Z,1510161446.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:26.360Z,1510161446.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:26.749Z,1510161446.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:26.765Z,1510161446.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:27.147Z,1510161447.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:27.167Z,1510161447.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:27.545Z,1510161447.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:27.564Z,1510161447.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:27.928Z,1510161447.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:27.959Z,1510161447.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:28.327Z,1510161448.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:28.358Z,1510161448.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:28.745Z,1510161448.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:28.772Z,1510161448.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:29.149Z,1510161449.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:29.166Z,1510161449.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:29.537Z,1510161449.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:29.567Z,1510161449.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:29.923Z,1510161449.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:29.940Z,1510161449.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:30.328Z,1510161450.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:30.367Z,1510161450.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:30.727Z,1510161450.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:30.742Z,1510161450.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:31.137Z,1510161451.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:31.171Z,1510161451.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:31.541Z,1510161451.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:31.569Z,1510161451.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:31.937Z,1510161451.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:31.970Z,1510161451.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:32.323Z,1510161452.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:32.340Z,1510161452.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:32.727Z,1510161452.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:32.744Z,1510161452.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:33.130Z,1510161453.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:33.165Z,1510161453.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:33.529Z,1510161453.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:33.546Z,1510161453.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:33.942Z,1510161453.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:33.966Z,1510161453.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:34.341Z,1510161454.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:34.372Z,1510161454.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:34.741Z,1510161454.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:34.773Z,1510161454.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:35.130Z,1510161455.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:35.146Z,1510161455.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:35.530Z,1510161455.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:35.545Z,1510161455.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:35.931Z,1510161455.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:35.947Z,1510161455.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:36.330Z,1510161456.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:36.347Z,1510161456.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:36.741Z,1510161456.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:36.772Z,1510161456.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:37.141Z,1510161457.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:37.173Z,1510161457.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:37.542Z,1510161457.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:37.572Z,1510161457.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:37.930Z,1510161457.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:38.017Z,1510161458.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:38.329Z,1510161458.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:38.345Z,1510161458.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:38.742Z,1510161458.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:38.796Z,1510161458.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:39.141Z,1510161459.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:39.178Z,1510161459.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:39.541Z,1510161459.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:39.596Z,1510161459.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:39.931Z,1510161459.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:39.951Z,1510161459.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:40.328Z,1510161460.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:40.347Z,1510161460.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:40.737Z,1510161460.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:40.754Z,1510161460.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:41.141Z,1510161461.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:41.176Z,1510161461.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:41.541Z,1510161461.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:41.575Z,1510161461.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:41.930Z,1510161461.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:41.946Z,1510161461.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:42.330Z,1510161462.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:42.346Z,1510161462.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:42.741Z,1510161462.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:42.778Z,1510161462.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:43.137Z,1510161463.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:43.154Z,1510161463.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:43.542Z,1510161463.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:43.574Z,1510161463.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:43.930Z,1510161463.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:43.946Z,1510161463.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:44.328Z,1510161464.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:44.345Z,1510161464.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:44.741Z,1510161464.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:44.758Z,1510161464.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:45.141Z,1510161465.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:45.157Z,1510161465.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:45.541Z,1510161465.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:45.558Z,1510161465.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:45.931Z,1510161465.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:45.952Z,1510161465.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:46.330Z,1510161466.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:46.345Z,1510161466.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:46.741Z,1510161466.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:46.758Z,1510161466.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:47.141Z,1510161467.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:47.158Z,1510161467.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:47.537Z,1510161467.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:47.559Z,1510161467.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:47.934Z,1510161467.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:47.991Z,1510161467.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:48.332Z,1510161468.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:48.348Z,1510161468.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:48.737Z,1510161468.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:48.753Z,1510161468.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:49.141Z,1510161469.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:49.158Z,1510161469.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:49.542Z,1510161469.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:49.558Z,1510161469.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:49.933Z,1510161469.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:49.949Z,1510161469.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:50.331Z,1510161470.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:50.347Z,1510161470.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:50.742Z,1510161470.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:50.758Z,1510161470.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:51.141Z,1510161471.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:51.157Z,1510161471.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:51.537Z,1510161471.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:51.554Z,1510161471.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:51.933Z,1510161471.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:51.949Z,1510161471.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:52.330Z,1510161472.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:52.346Z,1510161472.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:52.731Z,1510161472.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:52.747Z,1510161472.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:53.142Z,1510161473.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:53.158Z,1510161473.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:53.545Z,1510161473.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:53.561Z,1510161473.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:53.937Z,1510161473.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:53.954Z,1510161473.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:54.332Z,1510161474.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:54.349Z,1510161474.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:54.732Z,1510161474.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:54.748Z,1510161474.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:55.135Z,1510161475.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:55.151Z,1510161475.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:55.531Z,1510161475.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:55.548Z,1510161475.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:55.938Z,1510161475.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:55.954Z,1510161475.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:56.338Z,1510161476.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:56.354Z,1510161476.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:56.742Z,1510161476.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:56.759Z,1510161476.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:57.132Z,1510161477.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:57.149Z,1510161477.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:57.529Z,1510161477.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:57.546Z,1510161477.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:57.932Z,1510161477.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:57.949Z,1510161477.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:58.332Z,1510161478.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:58.348Z,1510161478.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:58.741Z,1510161478.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:58.758Z,1510161478.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:59.142Z,1510161479.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:59.158Z,1510161479.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:59.537Z,1510161479.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:17:59.559Z,1510161479.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:17:59.934Z,1510161479.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:00.019Z,1510161480.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:00.332Z,1510161480.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:00.351Z,1510161480.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:00.741Z,1510161480.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:00.763Z,1510161480.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:01.141Z,1510161481.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:01.192Z,1510161481.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:01.546Z,1510161481.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:01.562Z,1510161481.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:01.933Z,1510161481.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:01.985Z,1510161481.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:02.336Z,1510161482.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:02.352Z,1510161482.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:02.731Z,1510161482.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:02.753Z,1510161482.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:03.143Z,1510161483.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:03.163Z,1510161483.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:03.544Z,1510161483.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:03.560Z,1510161483.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:03.944Z,1510161483.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:03.960Z,1510161483.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:04.329Z,1510161484.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:04.351Z,1510161484.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:04.730Z,1510161484.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:04.747Z,1510161484.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:05.131Z,1510161485.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:05.148Z,1510161485.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:05.534Z,1510161485.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:05.550Z,1510161485.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:05.944Z,1510161485.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:05.961Z,1510161485.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:06.343Z,1510161486.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:06.360Z,1510161486.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:06.743Z,1510161486.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:06.764Z,1510161486.764 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:06.764Z,1510161486.764 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78
2017-11-08T17:18:06.764Z,1510161486.764 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T17:18:06.766Z,1510161486.766 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:06.766Z,1510161486.766 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78
2017-11-08T17:18:06.766Z,1510161486.766 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T17:18:06.768Z,1510161486.768 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:06.768Z,1510161486.768 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 78
2017-11-08T17:18:06.768Z,1510161486.768 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T17:18:06.877Z,1510161486.877 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T17:18:06.877Z,1510161486.877 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T17:18:06.877Z,1510161486.877 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T17:18:07.123Z,1510161487.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:07.237Z,1510161487.237 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T17:18:07.237Z,1510161487.237 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78
2017-11-08T17:18:07.237Z,1510161487.237 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T17:18:07.237Z,1510161487.237 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78
2017-11-08T17:18:07.238Z,1510161487.238 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T17:18:07.238Z,1510161487.238 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 78
2017-11-08T17:18:07.527Z,1510161487.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:07.552Z,1510161487.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T17:18:07.552Z,1510161487.552 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:18:07.553Z,1510161487.553 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:18:07.553Z,1510161487.553 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T17:18:07.554Z,1510161487.554 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:18:07.554Z,1510161487.554 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:18:07.554Z,1510161487.554 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T17:18:07.555Z,1510161487.555 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:18:07.555Z,1510161487.555 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:18:07.928Z,1510161487.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:07.962Z,1510161487.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T17:18:07.963Z,1510161487.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:11.766Z,1510161491.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:11.819Z,1510161491.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2017-11-08T17:18:11.820Z,1510161491.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:11.969Z,1510161491.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:12.006Z,1510161492.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T17:18:12.007Z,1510161492.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:12.358Z,1510161492.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:12.404Z,1510161492.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T17:18:12.405Z,1510161492.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:12.759Z,1510161492.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:12.796Z,1510161492.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T17:18:12.802Z,1510161492.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:13.147Z,1510161493.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:13.169Z,1510161493.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T17:18:13.170Z,1510161493.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:13.543Z,1510161493.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:13.571Z,1510161493.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T17:18:13.572Z,1510161493.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:13.947Z,1510161493.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:13.962Z,1510161493.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T17:18:13.963Z,1510161493.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:14.339Z,1510161494.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:14.370Z,1510161494.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T17:18:14.371Z,1510161494.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:14.759Z,1510161494.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:14.774Z,1510161494.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T17:18:14.775Z,1510161494.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:15.163Z,1510161495.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:15.179Z,1510161495.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T17:18:15.180Z,1510161495.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:15.563Z,1510161495.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:15.579Z,1510161495.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T17:18:15.580Z,1510161495.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:15.940Z,1510161495.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:15.972Z,1510161495.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T17:18:15.973Z,1510161495.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:16.344Z,1510161496.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:16.370Z,1510161496.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T17:18:16.370Z,1510161496.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:16.759Z,1510161496.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:16.775Z,1510161496.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T17:18:16.776Z,1510161496.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:17.163Z,1510161497.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:17.178Z,1510161497.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T17:18:17.179Z,1510161497.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:17.565Z,1510161497.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:17.581Z,1510161497.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T17:18:17.582Z,1510161497.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:17.944Z,1510161497.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:17.971Z,1510161497.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T17:18:17.972Z,1510161497.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:18.339Z,1510161498.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:18.368Z,1510161498.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T17:18:18.369Z,1510161498.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:18.765Z,1510161498.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:18.781Z,1510161498.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T17:18:18.782Z,1510161498.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:19.163Z,1510161499.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:19.179Z,1510161499.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T17:18:19.180Z,1510161499.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:19.555Z,1510161499.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:19.571Z,1510161499.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T17:18:19.572Z,1510161499.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:19.945Z,1510161499.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:19.975Z,1510161499.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T17:18:19.976Z,1510161499.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:20.344Z,1510161500.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:20.368Z,1510161500.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T17:18:20.369Z,1510161500.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:20.759Z,1510161500.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:20.775Z,1510161500.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T17:18:20.775Z,1510161500.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:21.165Z,1510161501.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:21.181Z,1510161501.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T17:18:21.182Z,1510161501.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:21.564Z,1510161501.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:21.580Z,1510161501.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T17:18:21.581Z,1510161501.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:21.944Z,1510161501.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:21.968Z,1510161501.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T17:18:21.969Z,1510161501.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:22.344Z,1510161502.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:22.378Z,1510161502.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T17:18:22.379Z,1510161502.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:22.763Z,1510161502.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:22.779Z,1510161502.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T17:18:22.781Z,1510161502.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:23.159Z,1510161503.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:23.179Z,1510161503.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T17:18:23.180Z,1510161503.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:23.565Z,1510161503.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:23.581Z,1510161503.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T17:18:23.582Z,1510161503.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:23.944Z,1510161503.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:24.023Z,1510161504.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T17:18:24.024Z,1510161504.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:24.339Z,1510161504.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:24.354Z,1510161504.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T17:18:24.355Z,1510161504.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:24.758Z,1510161504.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:24.826Z,1510161504.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T17:18:24.827Z,1510161504.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:25.157Z,1510161505.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:25.187Z,1510161505.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T17:18:25.188Z,1510161505.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:25.553Z,1510161505.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:25.622Z,1510161505.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T17:18:25.623Z,1510161505.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:25.945Z,1510161505.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:25.960Z,1510161505.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T17:18:25.977Z,1510161505.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:26.343Z,1510161506.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:26.363Z,1510161506.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T17:18:26.364Z,1510161506.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:26.757Z,1510161506.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:26.789Z,1510161506.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:27.161Z,1510161507.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:27.189Z,1510161507.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:27.558Z,1510161507.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:27.590Z,1510161507.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:27.948Z,1510161507.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:27.963Z,1510161507.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:28.348Z,1510161508.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:28.364Z,1510161508.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:28.758Z,1510161508.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:28.790Z,1510161508.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:29.153Z,1510161509.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:29.169Z,1510161509.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:29.558Z,1510161509.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:29.590Z,1510161509.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:29.947Z,1510161509.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:29.967Z,1510161509.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:30.345Z,1510161510.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:30.361Z,1510161510.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:30.758Z,1510161510.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:30.774Z,1510161510.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:31.157Z,1510161511.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:31.174Z,1510161511.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:31.554Z,1510161511.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:31.569Z,1510161511.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:31.950Z,1510161511.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:31.967Z,1510161511.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:32.349Z,1510161512.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:32.365Z,1510161512.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:32.761Z,1510161512.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:32.799Z,1510161512.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:33.154Z,1510161513.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:33.170Z,1510161513.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:33.554Z,1510161513.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:33.570Z,1510161513.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:33.946Z,1510161513.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:33.996Z,1510161513.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:34.346Z,1510161514.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:34.363Z,1510161514.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:34.758Z,1510161514.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:34.775Z,1510161514.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:35.158Z,1510161515.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:35.174Z,1510161515.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:35.558Z,1510161515.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:35.575Z,1510161515.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:35.948Z,1510161515.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:35.969Z,1510161515.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:36.348Z,1510161516.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:36.364Z,1510161516.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:36.754Z,1510161516.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:36.771Z,1510161516.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:37.158Z,1510161517.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:37.174Z,1510161517.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:37.553Z,1510161517.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:37.575Z,1510161517.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:37.950Z,1510161517.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:37.966Z,1510161517.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:38.349Z,1510161518.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:38.365Z,1510161518.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:38.750Z,1510161518.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:38.771Z,1510161518.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:39.153Z,1510161519.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:39.170Z,1510161519.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:39.558Z,1510161519.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:39.574Z,1510161519.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:39.946Z,1510161519.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:39.962Z,1510161519.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:40.347Z,1510161520.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:40.363Z,1510161520.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:40.758Z,1510161520.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:40.774Z,1510161520.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:41.157Z,1510161521.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:41.173Z,1510161521.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:41.558Z,1510161521.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:41.574Z,1510161521.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:41.954Z,1510161521.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:41.970Z,1510161521.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:42.350Z,1510161522.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:42.366Z,1510161522.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:42.758Z,1510161522.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:42.774Z,1510161522.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:43.158Z,1510161523.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:43.174Z,1510161523.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:43.555Z,1510161523.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:43.575Z,1510161523.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:43.951Z,1510161523.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:43.968Z,1510161523.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:44.353Z,1510161524.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:44.370Z,1510161524.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:44.758Z,1510161524.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:44.774Z,1510161524.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:45.155Z,1510161525.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:45.180Z,1510161525.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:45.558Z,1510161525.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:45.580Z,1510161525.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:45.950Z,1510161525.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:46.046Z,1510161526.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:46.339Z,1510161526.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:46.375Z,1510161526.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:46.762Z,1510161526.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:46.815Z,1510161526.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:47.163Z,1510161527.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:47.179Z,1510161527.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:47.552Z,1510161527.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:47.614Z,1510161527.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:47.943Z,1510161527.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:47.975Z,1510161527.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:48.343Z,1510161528.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:48.375Z,1510161528.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:48.761Z,1510161528.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:48.778Z,1510161528.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:49.157Z,1510161529.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:49.182Z,1510161529.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:49.553Z,1510161529.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:49.584Z,1510161529.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:49.944Z,1510161529.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:49.976Z,1510161529.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:50.344Z,1510161530.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:50.360Z,1510161530.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:50.753Z,1510161530.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:50.785Z,1510161530.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:51.153Z,1510161531.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:51.178Z,1510161531.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:51.558Z,1510161531.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:51.590Z,1510161531.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:51.948Z,1510161531.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:51.963Z,1510161531.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:52.340Z,1510161532.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:52.357Z,1510161532.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:52.762Z,1510161532.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:52.785Z,1510161532.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:53.157Z,1510161533.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:53.188Z,1510161533.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:53.558Z,1510161533.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:53.589Z,1510161533.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:53.947Z,1510161533.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:53.968Z,1510161533.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:54.346Z,1510161534.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:54.362Z,1510161534.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:54.753Z,1510161534.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:54.770Z,1510161534.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:55.154Z,1510161535.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:55.170Z,1510161535.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:55.557Z,1510161535.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:55.591Z,1510161535.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:55.947Z,1510161535.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:55.000Z,1510161536.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:56.346Z,1510161536.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:56.363Z,1510161536.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:56.758Z,1510161536.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:56.795Z,1510161536.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:57.157Z,1510161537.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:57.190Z,1510161537.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:57.558Z,1510161537.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:57.574Z,1510161537.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:57.946Z,1510161537.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:57.962Z,1510161537.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:58.344Z,1510161538.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:58.361Z,1510161538.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:58.758Z,1510161538.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:58.774Z,1510161538.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:59.157Z,1510161539.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:59.173Z,1510161539.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:59.558Z,1510161539.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:59.574Z,1510161539.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:18:59.945Z,1510161539.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:18:59.962Z,1510161539.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:00.348Z,1510161540.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:00.364Z,1510161540.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:00.754Z,1510161540.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:00.770Z,1510161540.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:01.158Z,1510161541.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:01.174Z,1510161541.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:01.554Z,1510161541.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:01.570Z,1510161541.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:01.950Z,1510161541.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:01.966Z,1510161541.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:02.348Z,1510161542.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:02.364Z,1510161542.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:02.753Z,1510161542.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:02.770Z,1510161542.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:03.158Z,1510161543.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:03.174Z,1510161543.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:03.558Z,1510161543.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:03.574Z,1510161543.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:03.948Z,1510161543.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:03.976Z,1510161543.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:04.349Z,1510161544.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:04.365Z,1510161544.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:04.758Z,1510161544.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:04.774Z,1510161544.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:05.157Z,1510161545.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:05.173Z,1510161545.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:05.558Z,1510161545.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:05.574Z,1510161545.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:05.948Z,1510161545.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:05.965Z,1510161545.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:06.348Z,1510161546.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:06.371Z,1510161546.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:06.758Z,1510161546.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:06.774Z,1510161546.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:07.158Z,1510161547.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:07.174Z,1510161547.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:07.561Z,1510161547.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:07.611Z,1510161547.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:07.618Z,1510161547.618 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T17:19:07.619Z,1510161547.619 [Default:CheckIn:C.Wait] Stopped
2017-11-08T17:19:07.619Z,1510161547.619 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T17:19:07.619Z,1510161547.619 [Default:CheckIn:D] Running Loop=1
2017-11-08T17:19:07.951Z,1510161547.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:08.008Z,1510161548.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:08.011Z,1510161548.011 [Default:CheckIn:D] Stopped
2017-11-08T17:19:08.011Z,1510161548.011 [Default:CheckIn:E] Running Loop=1
2017-11-08T17:19:11.039Z,1510161551.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:11.071Z,1510161551.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:11.075Z,1510161551.075 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 232.450521 min 
2017-11-08T17:19:11.075Z,1510161551.075 [Default:CheckIn:E] Stopped
2017-11-08T17:19:11.075Z,1510161551.075 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T17:19:11.075Z,1510161551.075 [Default:CheckIn] Stopped
2017-11-08T17:19:11.076Z,1510161551.076 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T17:19:11.076Z,1510161551.076 [Default:CheckIn](INFO): Running loop #11
2017-11-08T17:19:11.076Z,1510161551.076 [Default:CheckIn] Running Loop=11
2017-11-08T17:19:11.076Z,1510161551.076 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T17:19:11.076Z,1510161551.076 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T17:19:11.190Z,1510161551.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:11.231Z,1510161551.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:11.601Z,1510161551.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:11.632Z,1510161551.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:11.998Z,1510161551.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:12.055Z,1510161552.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:12.383Z,1510161552.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:12.399Z,1510161552.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:12.783Z,1510161552.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:12.830Z,1510161552.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:13.185Z,1510161553.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:13.202Z,1510161553.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:13.581Z,1510161553.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:13.597Z,1510161553.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:13.993Z,1510161553.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:14.009Z,1510161554.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:14.394Z,1510161554.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:14.410Z,1510161554.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:14.789Z,1510161554.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:14.808Z,1510161554.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:15.184Z,1510161555.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:15.205Z,1510161555.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:15.586Z,1510161555.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:15.602Z,1510161555.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:15.986Z,1510161555.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:16.002Z,1510161556.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:16.384Z,1510161556.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:16.399Z,1510161556.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:16.787Z,1510161556.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:16.807Z,1510161556.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:17.193Z,1510161557.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:17.210Z,1510161557.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:17.594Z,1510161557.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:17.640Z,1510161557.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:17.978Z,1510161557.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:18.015Z,1510161558.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:18.384Z,1510161558.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:18.401Z,1510161558.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:18.784Z,1510161558.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:18.801Z,1510161558.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:19.185Z,1510161559.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:19.203Z,1510161559.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:19.581Z,1510161559.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:19.598Z,1510161559.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:19.992Z,1510161559.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:20.009Z,1510161560.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:20.390Z,1510161560.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:20.406Z,1510161560.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:20.789Z,1510161560.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:20.805Z,1510161560.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:21.185Z,1510161561.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:21.247Z,1510161561.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:21.582Z,1510161561.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:21.598Z,1510161561.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:21.985Z,1510161561.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:22.002Z,1510161562.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:22.385Z,1510161562.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:22.401Z,1510161562.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:22.798Z,1510161562.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:22.834Z,1510161562.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:23.191Z,1510161563.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:23.208Z,1510161563.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:23.593Z,1510161563.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:23.615Z,1510161563.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:23.978Z,1510161563.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:24.008Z,1510161564.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:24.386Z,1510161564.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:24.403Z,1510161564.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:24.783Z,1510161564.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:24.806Z,1510161564.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:25.187Z,1510161565.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:25.208Z,1510161565.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:25.585Z,1510161565.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:25.602Z,1510161565.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:25.999Z,1510161565.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:26.019Z,1510161566.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:26.396Z,1510161566.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:26.413Z,1510161566.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:26.799Z,1510161566.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:26.816Z,1510161566.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:27.187Z,1510161567.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:27.204Z,1510161567.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:27.586Z,1510161567.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:27.603Z,1510161567.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:27.984Z,1510161567.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:28.001Z,1510161568.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:28.383Z,1510161568.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:28.406Z,1510161568.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:28.796Z,1510161568.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:28.824Z,1510161568.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:29.199Z,1510161569.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:29.219Z,1510161569.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:29.600Z,1510161569.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:29.615Z,1510161569.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:29.975Z,1510161569.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:30.011Z,1510161570.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:30.385Z,1510161570.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:30.402Z,1510161570.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:30.786Z,1510161570.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:30.804Z,1510161570.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:31.185Z,1510161571.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:31.209Z,1510161571.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:31.585Z,1510161571.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:31.601Z,1510161571.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:31.999Z,1510161571.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:32.019Z,1510161572.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:32.395Z,1510161572.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:32.421Z,1510161572.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:32.795Z,1510161572.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:32.812Z,1510161572.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:33.186Z,1510161573.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:33.221Z,1510161573.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:33.579Z,1510161573.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:33.631Z,1510161573.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:33.976Z,1510161573.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:34.010Z,1510161574.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:34.379Z,1510161574.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:34.428Z,1510161574.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:34.795Z,1510161574.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:34.815Z,1510161574.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:35.199Z,1510161575.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:35.259Z,1510161575.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:35.599Z,1510161575.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:35.623Z,1510161575.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:35.975Z,1510161575.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:36.005Z,1510161576.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:36.379Z,1510161576.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:36.404Z,1510161576.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:36.779Z,1510161576.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:36.805Z,1510161576.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:37.176Z,1510161577.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:37.214Z,1510161577.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:37.579Z,1510161577.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:37.604Z,1510161577.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:37.000Z,1510161578.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:38.015Z,1510161578.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:38.395Z,1510161578.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:38.411Z,1510161578.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:38.795Z,1510161578.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:38.815Z,1510161578.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:39.180Z,1510161579.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:39.221Z,1510161579.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:39.579Z,1510161579.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:39.604Z,1510161579.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:39.980Z,1510161579.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:40.005Z,1510161580.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:40.380Z,1510161580.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:40.407Z,1510161580.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:40.795Z,1510161580.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:40.812Z,1510161580.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:41.200Z,1510161581.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:41.216Z,1510161581.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:41.600Z,1510161581.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:41.619Z,1510161581.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:41.975Z,1510161581.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:42.008Z,1510161582.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:42.379Z,1510161582.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:42.408Z,1510161582.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:42.780Z,1510161582.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:42.805Z,1510161582.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:43.180Z,1510161583.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:43.205Z,1510161583.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:43.579Z,1510161583.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:43.636Z,1510161583.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:44.001Z,1510161584.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:44.017Z,1510161584.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:44.395Z,1510161584.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:44.411Z,1510161584.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:44.796Z,1510161584.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:44.812Z,1510161584.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:45.179Z,1510161585.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:45.215Z,1510161585.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:45.579Z,1510161585.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:45.613Z,1510161585.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:45.980Z,1510161585.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:46.012Z,1510161586.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:46.379Z,1510161586.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:46.396Z,1510161586.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:46.790Z,1510161586.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:46.826Z,1510161586.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:47.194Z,1510161587.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:47.225Z,1510161587.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:47.594Z,1510161587.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:47.627Z,1510161587.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:47.978Z,1510161587.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:47.994Z,1510161587.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:48.382Z,1510161588.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:48.398Z,1510161588.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:48.782Z,1510161588.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:48.799Z,1510161588.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:49.182Z,1510161589.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:49.198Z,1510161589.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:49.579Z,1510161589.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:49.599Z,1510161589.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:49.994Z,1510161589.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:50.032Z,1510161590.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:50.393Z,1510161590.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:50.410Z,1510161590.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:50.790Z,1510161590.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:50.806Z,1510161590.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:51.184Z,1510161591.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:51.205Z,1510161591.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:51.585Z,1510161591.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:51.602Z,1510161591.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:51.985Z,1510161591.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:52.001Z,1510161592.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:52.386Z,1510161592.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:52.402Z,1510161592.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:52.790Z,1510161592.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:52.806Z,1510161592.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:53.194Z,1510161593.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:53.214Z,1510161593.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:53.594Z,1510161593.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:53.610Z,1510161593.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:53.979Z,1510161593.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:54.009Z,1510161594.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:54.382Z,1510161594.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:54.398Z,1510161594.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:54.784Z,1510161594.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:54.819Z,1510161594.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:55.187Z,1510161595.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:55.204Z,1510161595.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:55.579Z,1510161595.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:55.654Z,1510161595.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:55.996Z,1510161595.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:56.051Z,1510161596.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:56.396Z,1510161596.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:56.417Z,1510161596.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:56.795Z,1510161596.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:56.851Z,1510161596.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:57.183Z,1510161597.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:57.208Z,1510161597.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:57.575Z,1510161597.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:57.639Z,1510161597.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:57.985Z,1510161597.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:58.003Z,1510161598.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:58.383Z,1510161598.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:58.412Z,1510161598.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:58.795Z,1510161598.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:58.829Z,1510161598.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:59.189Z,1510161599.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:59.225Z,1510161599.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:59.594Z,1510161599.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:59.625Z,1510161599.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:19:59.979Z,1510161599.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:19:59.999Z,1510161599.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:00.383Z,1510161600.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:00.399Z,1510161600.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:00.783Z,1510161600.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:00.803Z,1510161600.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:01.180Z,1510161601.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:01.196Z,1510161601.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:01.579Z,1510161601.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:01.595Z,1510161601.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:01.998Z,1510161601.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:02.022Z,1510161602.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:02.390Z,1510161602.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:02.406Z,1510161602.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:02.786Z,1510161602.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:02.803Z,1510161602.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:03.183Z,1510161603.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:03.204Z,1510161603.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:03.582Z,1510161603.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:03.598Z,1510161603.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:03.982Z,1510161603.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:03.998Z,1510161603.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:04.383Z,1510161604.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:04.401Z,1510161604.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:04.790Z,1510161604.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:04.807Z,1510161604.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:05.189Z,1510161605.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:05.206Z,1510161605.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:05.594Z,1510161605.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:05.632Z,1510161605.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:05.985Z,1510161605.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:06.039Z,1510161606.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:06.384Z,1510161606.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:06.401Z,1510161606.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:06.784Z,1510161606.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:06.809Z,1510161606.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:07.182Z,1510161607.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:07.199Z,1510161607.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:07.584Z,1510161607.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:07.601Z,1510161607.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:07.998Z,1510161607.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:08.015Z,1510161608.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:11.082Z,1510161611.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:11.099Z,1510161611.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:11.235Z,1510161611.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:11.254Z,1510161611.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:11.612Z,1510161611.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:11.647Z,1510161611.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:12.008Z,1510161612.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:12.043Z,1510161612.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:12.409Z,1510161612.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:12.443Z,1510161612.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:12.829Z,1510161612.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:12.863Z,1510161612.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:13.231Z,1510161613.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:13.242Z,1510161613.242 [PNI_TCM](ERROR): CRC does not match. Expected:0x61534 got:0x6977
2017-11-08T17:20:13.261Z,1510161613.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:13.615Z,1510161613.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:13.642Z,1510161613.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:14.010Z,1510161614.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:14.043Z,1510161614.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:14.403Z,1510161614.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:14.446Z,1510161614.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:14.803Z,1510161614.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:14.848Z,1510161614.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:15.209Z,1510161615.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:15.247Z,1510161615.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:15.604Z,1510161615.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:15.639Z,1510161615.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:16.017Z,1510161616.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:16.048Z,1510161616.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:16.418Z,1510161616.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:16.452Z,1510161616.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:16.824Z,1510161616.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:16.849Z,1510161616.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:17.204Z,1510161617.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:17.223Z,1510161617.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:17.608Z,1510161617.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:17.651Z,1510161617.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:18.008Z,1510161618.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:18.067Z,1510161618.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:18.407Z,1510161618.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:18.475Z,1510161618.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:18.823Z,1510161618.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:18.857Z,1510161618.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:19.222Z,1510161619.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:19.259Z,1510161619.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:19.613Z,1510161619.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:19.659Z,1510161619.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:20.010Z,1510161620.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:20.030Z,1510161620.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:20.411Z,1510161620.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:20.462Z,1510161620.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:20.808Z,1510161620.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:20.853Z,1510161620.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:21.211Z,1510161621.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:21.235Z,1510161621.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:21.610Z,1510161621.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:21.630Z,1510161621.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:22.016Z,1510161622.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:22.032Z,1510161622.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:22.421Z,1510161622.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:22.459Z,1510161622.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:22.818Z,1510161622.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:22.854Z,1510161622.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:23.208Z,1510161623.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:23.228Z,1510161623.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:23.611Z,1510161623.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:23.628Z,1510161623.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:24.008Z,1510161624.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:24.052Z,1510161624.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:24.410Z,1510161624.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:24.429Z,1510161624.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:24.824Z,1510161624.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:24.856Z,1510161624.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:25.224Z,1510161625.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:25.302Z,1510161625.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:25.621Z,1510161625.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:25.663Z,1510161625.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:26.010Z,1510161626.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:26.030Z,1510161626.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:26.408Z,1510161626.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:26.428Z,1510161626.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:26.809Z,1510161626.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:26.826Z,1510161626.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:27.211Z,1510161627.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:27.258Z,1510161627.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:27.610Z,1510161627.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:27.629Z,1510161627.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:28.013Z,1510161628.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:28.033Z,1510161628.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:28.423Z,1510161628.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:28.463Z,1510161628.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:28.822Z,1510161628.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:28.887Z,1510161628.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:29.208Z,1510161629.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:29.226Z,1510161629.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:29.610Z,1510161629.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:29.631Z,1510161629.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:30.010Z,1510161630.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:30.031Z,1510161630.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:30.408Z,1510161630.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:30.457Z,1510161630.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:30.822Z,1510161630.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:30.858Z,1510161630.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:31.224Z,1510161631.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:31.240Z,1510161631.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:31.616Z,1510161631.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:31.633Z,1510161631.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:32.012Z,1510161632.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:32.056Z,1510161632.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:32.412Z,1510161632.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:32.432Z,1510161632.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:32.809Z,1510161632.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:32.829Z,1510161632.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:33.214Z,1510161633.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:33.242Z,1510161633.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:33.609Z,1510161633.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:33.660Z,1510161633.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:34.015Z,1510161634.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:34.036Z,1510161634.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:34.423Z,1510161634.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:34.440Z,1510161634.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:34.818Z,1510161634.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:34.839Z,1510161634.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:35.210Z,1510161635.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:35.261Z,1510161635.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:35.613Z,1510161635.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:35.634Z,1510161635.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:36.011Z,1510161636.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:36.031Z,1510161636.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:36.409Z,1510161636.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:36.432Z,1510161636.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:36.822Z,1510161636.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:36.859Z,1510161636.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:37.227Z,1510161637.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:37.261Z,1510161637.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:37.624Z,1510161637.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:37.640Z,1510161637.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:38.016Z,1510161638.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:38.035Z,1510161638.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:38.406Z,1510161638.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:38.443Z,1510161638.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:38.811Z,1510161638.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:38.832Z,1510161638.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:39.210Z,1510161639.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:39.235Z,1510161639.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:39.610Z,1510161639.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:39.633Z,1510161639.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:40.019Z,1510161640.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:40.066Z,1510161640.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:40.422Z,1510161640.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:40.442Z,1510161640.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:40.822Z,1510161640.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:40.879Z,1510161640.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:41.217Z,1510161641.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:41.284Z,1510161641.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:41.611Z,1510161641.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:41.647Z,1510161641.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:42.012Z,1510161642.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:42.074Z,1510161642.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:42.415Z,1510161642.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:42.434Z,1510161642.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:42.830Z,1510161642.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:42.883Z,1510161642.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:43.222Z,1510161643.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:43.269Z,1510161643.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:43.625Z,1510161643.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:43.643Z,1510161643.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:44.008Z,1510161644.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:44.042Z,1510161644.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:44.404Z,1510161644.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:44.442Z,1510161644.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:44.803Z,1510161644.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:44.846Z,1510161644.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:45.208Z,1510161645.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:45.238Z,1510161645.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:45.603Z,1510161645.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:45.639Z,1510161645.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:46.026Z,1510161646.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:46.043Z,1510161646.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:46.428Z,1510161646.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:46.459Z,1510161646.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:46.824Z,1510161646.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:46.833Z,1510161646.833 [PNI_TCM](ERROR): CRC does not match. Expected:0x31940 got:0x1239
2017-11-08T17:20:46.860Z,1510161646.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:47.208Z,1510161647.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:47.237Z,1510161647.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:47.618Z,1510161647.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:47.634Z,1510161647.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:48.004Z,1510161648.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:48.048Z,1510161648.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:48.403Z,1510161648.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:48.440Z,1510161648.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:48.833Z,1510161648.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:48.848Z,1510161648.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:49.230Z,1510161649.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:49.246Z,1510161649.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:49.613Z,1510161649.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:49.656Z,1510161649.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:50.007Z,1510161650.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:50.043Z,1510161650.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:50.403Z,1510161650.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:50.446Z,1510161650.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:50.804Z,1510161650.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:50.836Z,1510161650.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:51.208Z,1510161651.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:51.265Z,1510161651.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:51.603Z,1510161651.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:51.644Z,1510161651.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:52.014Z,1510161652.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:52.045Z,1510161652.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:52.423Z,1510161652.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:52.448Z,1510161652.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:52.818Z,1510161652.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:52.851Z,1510161652.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:53.203Z,1510161653.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:53.241Z,1510161653.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:53.607Z,1510161653.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:53.627Z,1510161653.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:54.014Z,1510161654.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:54.030Z,1510161654.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:54.406Z,1510161654.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:54.455Z,1510161654.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:54.822Z,1510161654.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:54.857Z,1510161654.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:55.224Z,1510161655.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:55.257Z,1510161655.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:55.623Z,1510161655.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:55.656Z,1510161655.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:56.010Z,1510161656.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:56.060Z,1510161656.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:56.410Z,1510161656.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:56.430Z,1510161656.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:56.807Z,1510161656.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:56.828Z,1510161656.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:57.212Z,1510161657.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:57.235Z,1510161657.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:57.610Z,1510161657.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:57.658Z,1510161657.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:58.021Z,1510161658.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:58.062Z,1510161658.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:58.424Z,1510161658.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:58.443Z,1510161658.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:58.823Z,1510161658.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:58.844Z,1510161658.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:59.209Z,1510161659.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:59.260Z,1510161659.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:20:59.611Z,1510161659.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:20:59.641Z,1510161659.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:00.015Z,1510161660.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:00.034Z,1510161660.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:00.411Z,1510161660.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:00.432Z,1510161660.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:00.823Z,1510161660.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:00.862Z,1510161660.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:01.226Z,1510161661.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:01.261Z,1510161661.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:01.622Z,1510161661.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:01.638Z,1510161661.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:02.013Z,1510161662.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:02.035Z,1510161662.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:02.413Z,1510161662.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:02.448Z,1510161662.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:02.809Z,1510161662.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:02.885Z,1510161662.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:03.217Z,1510161663.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:03.281Z,1510161663.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:03.616Z,1510161663.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:03.633Z,1510161663.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:04.019Z,1510161664.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:04.075Z,1510161664.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:04.423Z,1510161664.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:04.442Z,1510161664.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:04.824Z,1510161664.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:04.879Z,1510161664.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:05.217Z,1510161665.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:05.233Z,1510161665.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:05.611Z,1510161665.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:05.640Z,1510161665.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:06.014Z,1510161666.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:06.034Z,1510161666.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:06.409Z,1510161666.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:06.429Z,1510161666.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:06.826Z,1510161666.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:06.842Z,1510161666.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:07.222Z,1510161667.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:07.269Z,1510161667.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:07.622Z,1510161667.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:07.642Z,1510161667.642 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:07.642Z,1510161667.642 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79
2017-11-08T17:21:07.642Z,1510161667.642 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T17:21:07.644Z,1510161667.644 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:07.644Z,1510161667.644 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79
2017-11-08T17:21:07.644Z,1510161667.644 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T17:21:07.646Z,1510161667.646 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:07.646Z,1510161667.646 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 79
2017-11-08T17:21:07.646Z,1510161667.646 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T17:21:07.737Z,1510161667.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T17:21:07.737Z,1510161667.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T17:21:07.737Z,1510161667.737 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T17:21:08.008Z,1510161668.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:08.114Z,1510161668.114 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T17:21:08.114Z,1510161668.114 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79
2017-11-08T17:21:08.114Z,1510161668.114 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T17:21:08.114Z,1510161668.114 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79
2017-11-08T17:21:08.115Z,1510161668.115 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T17:21:08.115Z,1510161668.115 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 79
2017-11-08T17:21:11.094Z,1510161671.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:11.125Z,1510161671.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T17:21:11.126Z,1510161671.126 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:21:11.126Z,1510161671.126 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:21:11.127Z,1510161671.127 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T17:21:11.127Z,1510161671.127 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:21:11.127Z,1510161671.127 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:21:11.128Z,1510161671.128 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T17:21:11.128Z,1510161671.128 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:21:11.133Z,1510161671.133 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:21:11.255Z,1510161671.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:11.284Z,1510161671.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T17:21:11.285Z,1510161671.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:11.676Z,1510161671.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:11.692Z,1510161671.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-08T17:21:11.693Z,1510161671.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:12.076Z,1510161672.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:12.092Z,1510161672.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T17:21:12.093Z,1510161672.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:12.468Z,1510161672.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:12.484Z,1510161672.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T17:21:12.485Z,1510161672.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:12.851Z,1510161672.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:12.886Z,1510161672.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T17:21:12.887Z,1510161672.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:13.252Z,1510161673.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:13.299Z,1510161673.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-08T17:21:13.300Z,1510161673.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:13.649Z,1510161673.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:13.681Z,1510161673.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T17:21:13.682Z,1510161673.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:14.077Z,1510161674.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:14.092Z,1510161674.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-08T17:21:14.093Z,1510161674.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:14.472Z,1510161674.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:14.487Z,1510161674.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T17:21:14.488Z,1510161674.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:14.862Z,1510161674.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:14.886Z,1510161674.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T17:21:14.887Z,1510161674.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:15.254Z,1510161675.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:15.287Z,1510161675.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T17:21:15.287Z,1510161675.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:15.655Z,1510161675.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:15.691Z,1510161675.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T17:21:15.692Z,1510161675.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:16.048Z,1510161676.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:16.064Z,1510161676.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T17:21:16.073Z,1510161676.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:16.447Z,1510161676.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:16.462Z,1510161676.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T17:21:16.463Z,1510161676.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:16.866Z,1510161676.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:16.899Z,1510161676.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T17:21:16.900Z,1510161676.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:17.264Z,1510161677.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:17.297Z,1510161677.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T17:21:17.298Z,1510161677.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:17.665Z,1510161677.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:17.699Z,1510161677.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T17:21:17.700Z,1510161677.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:18.051Z,1510161678.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:18.071Z,1510161678.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T17:21:18.072Z,1510161678.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:18.457Z,1510161678.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:18.473Z,1510161678.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T17:21:18.474Z,1510161678.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:18.855Z,1510161678.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:18.871Z,1510161678.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T17:21:18.872Z,1510161678.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:19.255Z,1510161679.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:19.275Z,1510161679.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T17:21:19.276Z,1510161679.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:19.654Z,1510161679.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:19.670Z,1510161679.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T17:21:19.671Z,1510161679.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:20.069Z,1510161680.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:20.100Z,1510161680.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T17:21:20.101Z,1510161680.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:20.474Z,1510161680.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:20.498Z,1510161680.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T17:21:20.498Z,1510161680.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:20.862Z,1510161680.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:20.877Z,1510161680.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T17:21:20.878Z,1510161680.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:21.255Z,1510161681.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:21.271Z,1510161681.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T17:21:21.272Z,1510161681.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:21.659Z,1510161681.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:21.675Z,1510161681.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T17:21:21.676Z,1510161681.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:22.060Z,1510161682.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:22.103Z,1510161682.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T17:21:22.104Z,1510161682.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:22.456Z,1510161682.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:22.475Z,1510161682.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T17:21:22.476Z,1510161682.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:22.863Z,1510161682.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:22.879Z,1510161682.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T17:21:22.880Z,1510161682.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:23.270Z,1510161683.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:23.302Z,1510161683.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T17:21:23.303Z,1510161683.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:23.671Z,1510161683.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:23.687Z,1510161683.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T17:21:23.688Z,1510161683.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:24.057Z,1510161684.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:24.074Z,1510161684.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T17:21:24.075Z,1510161684.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:24.456Z,1510161684.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:24.472Z,1510161684.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T17:21:24.474Z,1510161684.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:24.861Z,1510161684.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:24.878Z,1510161684.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T17:21:24.879Z,1510161684.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:25.257Z,1510161685.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:25.330Z,1510161685.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T17:21:25.331Z,1510161685.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:25.657Z,1510161685.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:25.718Z,1510161685.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T17:21:25.719Z,1510161685.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:26.065Z,1510161686.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:26.081Z,1510161686.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T17:21:26.082Z,1510161686.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:26.466Z,1510161686.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:26.518Z,1510161686.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T17:21:26.519Z,1510161686.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:26.866Z,1510161686.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:26.882Z,1510161686.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T17:21:26.883Z,1510161686.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:27.256Z,1510161687.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:27.302Z,1510161687.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-08T17:21:27.303Z,1510161687.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:27.654Z,1510161687.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:27.675Z,1510161687.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:28.061Z,1510161688.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:28.077Z,1510161688.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:28.461Z,1510161688.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:28.477Z,1510161688.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:28.865Z,1510161688.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:28.888Z,1510161688.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:29.266Z,1510161689.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:29.283Z,1510161689.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:29.667Z,1510161689.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:29.691Z,1510161689.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:30.056Z,1510161690.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:30.080Z,1510161690.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:30.461Z,1510161690.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:30.478Z,1510161690.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:30.859Z,1510161690.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:30.875Z,1510161690.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:31.254Z,1510161691.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:31.285Z,1510161691.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:31.662Z,1510161691.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:31.678Z,1510161691.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:32.068Z,1510161692.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:32.091Z,1510161692.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:32.467Z,1510161692.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:32.483Z,1510161692.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:32.867Z,1510161692.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:32.883Z,1510161692.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:33.263Z,1510161693.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:33.278Z,1510161693.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:33.656Z,1510161693.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:33.673Z,1510161693.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:34.057Z,1510161694.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:34.081Z,1510161694.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:34.460Z,1510161694.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:34.483Z,1510161694.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:34.867Z,1510161694.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:34.884Z,1510161694.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:35.270Z,1510161695.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:35.287Z,1510161695.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:35.671Z,1510161695.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:35.719Z,1510161695.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:36.059Z,1510161696.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:36.079Z,1510161696.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:36.457Z,1510161696.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:36.479Z,1510161696.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:36.855Z,1510161696.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:36.877Z,1510161696.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:37.258Z,1510161697.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:37.280Z,1510161697.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:37.659Z,1510161697.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:37.676Z,1510161697.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:38.071Z,1510161698.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:38.086Z,1510161698.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:38.468Z,1510161698.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:38.484Z,1510161698.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:38.867Z,1510161698.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:38.883Z,1510161698.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:39.261Z,1510161699.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:39.277Z,1510161699.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:39.654Z,1510161699.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:39.684Z,1510161699.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:40.058Z,1510161700.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:40.074Z,1510161700.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:40.458Z,1510161700.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:40.474Z,1510161700.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:40.861Z,1510161700.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:40.887Z,1510161700.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:41.270Z,1510161701.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:41.291Z,1510161701.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:41.671Z,1510161701.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:41.687Z,1510161701.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:42.047Z,1510161702.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:42.078Z,1510161702.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:42.459Z,1510161702.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:42.475Z,1510161702.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:42.862Z,1510161702.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:42.878Z,1510161702.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:43.258Z,1510161703.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:43.274Z,1510161703.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:43.655Z,1510161703.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:43.684Z,1510161703.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:44.070Z,1510161704.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:44.091Z,1510161704.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:44.471Z,1510161704.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:44.488Z,1510161704.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:44.868Z,1510161704.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:44.884Z,1510161704.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:45.251Z,1510161705.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:45.286Z,1510161705.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:45.660Z,1510161705.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:45.677Z,1510161705.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:46.062Z,1510161706.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:46.083Z,1510161706.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:46.452Z,1510161706.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:46.487Z,1510161706.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:46.868Z,1510161706.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:46.884Z,1510161706.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:47.271Z,1510161707.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:47.288Z,1510161707.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:47.675Z,1510161707.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:47.765Z,1510161707.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:48.047Z,1510161708.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:48.076Z,1510161708.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:48.451Z,1510161708.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:48.499Z,1510161708.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:48.854Z,1510161708.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:48.887Z,1510161708.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:49.256Z,1510161709.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:49.303Z,1510161709.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:49.651Z,1510161709.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:49.683Z,1510161709.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:50.066Z,1510161710.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:50.103Z,1510161710.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:50.462Z,1510161710.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:50.488Z,1510161710.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:50.866Z,1510161710.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:50.892Z,1510161710.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:51.252Z,1510161711.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:51.268Z,1510161711.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:51.651Z,1510161711.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:51.671Z,1510161711.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:52.058Z,1510161712.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:52.074Z,1510161712.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:52.455Z,1510161712.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:52.476Z,1510161712.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:52.862Z,1510161712.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:52.878Z,1510161712.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:53.265Z,1510161713.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:53.300Z,1510161713.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:53.670Z,1510161713.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:53.705Z,1510161713.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:54.059Z,1510161714.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:54.080Z,1510161714.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:54.455Z,1510161714.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:54.471Z,1510161714.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:54.855Z,1510161714.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:54.875Z,1510161714.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:55.259Z,1510161715.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:55.280Z,1510161715.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:55.654Z,1510161715.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:55.670Z,1510161715.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:56.065Z,1510161716.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:56.082Z,1510161716.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:56.461Z,1510161716.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:56.478Z,1510161716.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:56.870Z,1510161716.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:56.902Z,1510161716.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:57.259Z,1510161717.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:57.280Z,1510161717.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:57.655Z,1510161717.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:57.711Z,1510161717.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:58.055Z,1510161718.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:58.075Z,1510161718.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:58.460Z,1510161718.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:58.477Z,1510161718.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:58.870Z,1510161718.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:58.902Z,1510161718.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:59.266Z,1510161719.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:59.282Z,1510161719.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:21:59.666Z,1510161719.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:21:59.682Z,1510161719.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:00.057Z,1510161720.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:00.074Z,1510161720.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:00.457Z,1510161720.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:00.473Z,1510161720.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:00.856Z,1510161720.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:00.888Z,1510161720.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:01.251Z,1510161721.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:01.283Z,1510161721.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:01.655Z,1510161721.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:01.672Z,1510161721.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:02.070Z,1510161722.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:02.087Z,1510161722.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:02.463Z,1510161722.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:02.481Z,1510161722.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:02.862Z,1510161722.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:02.879Z,1510161722.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:03.264Z,1510161723.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:03.280Z,1510161723.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:03.658Z,1510161723.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:03.674Z,1510161723.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:04.055Z,1510161724.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:04.071Z,1510161724.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:04.455Z,1510161724.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:04.486Z,1510161724.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:04.866Z,1510161724.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:04.883Z,1510161724.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:05.266Z,1510161725.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:05.282Z,1510161725.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:05.666Z,1510161725.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:05.684Z,1510161725.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:06.051Z,1510161726.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:06.088Z,1510161726.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:06.455Z,1510161726.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:06.480Z,1510161726.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:06.862Z,1510161726.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:06.879Z,1510161726.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:07.258Z,1510161727.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:07.275Z,1510161727.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:07.657Z,1510161727.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:07.674Z,1510161727.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:08.070Z,1510161728.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:08.092Z,1510161728.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:11.162Z,1510161731.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:11.257Z,1510161731.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:11.390Z,1510161731.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:11.415Z,1510161731.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:11.777Z,1510161731.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:11.793Z,1510161731.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:12.177Z,1510161732.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:12.193Z,1510161732.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:12.575Z,1510161732.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:12.636Z,1510161732.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:12.986Z,1510161732.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:13.017Z,1510161733.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:13.387Z,1510161733.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:13.435Z,1510161733.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:13.782Z,1510161733.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:13.815Z,1510161733.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:14.175Z,1510161734.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:14.196Z,1510161734.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:14.571Z,1510161734.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:14.587Z,1510161734.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:14.972Z,1510161734.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:14.988Z,1510161734.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:15.375Z,1510161735.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:15.400Z,1510161735.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:15.783Z,1510161735.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:15.799Z,1510161735.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:16.182Z,1510161736.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:16.198Z,1510161736.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:16.586Z,1510161736.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:16.603Z,1510161736.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:16.975Z,1510161736.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:16.995Z,1510161736.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:17.374Z,1510161737.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:17.390Z,1510161737.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:17.787Z,1510161737.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:17.807Z,1510161737.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:18.187Z,1510161738.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:18.207Z,1510161738.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:18.583Z,1510161738.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:18.600Z,1510161738.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:18.978Z,1510161738.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:19.009Z,1510161739.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:19.367Z,1510161739.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:19.404Z,1510161739.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:19.784Z,1510161739.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:19.801Z,1510161739.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:20.193Z,1510161740.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:20.210Z,1510161740.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:20.589Z,1510161740.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:20.606Z,1510161740.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:20.968Z,1510161740.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:21.003Z,1510161741.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:21.378Z,1510161741.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:21.407Z,1510161741.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:21.788Z,1510161741.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:21.843Z,1510161741.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:22.188Z,1510161742.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:22.205Z,1510161742.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:22.590Z,1510161742.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:22.615Z,1510161742.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:22.967Z,1510161742.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:23.002Z,1510161743.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:23.367Z,1510161743.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:23.408Z,1510161743.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:23.770Z,1510161743.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:23.798Z,1510161743.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:24.173Z,1510161744.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:24.199Z,1510161744.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:24.571Z,1510161744.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:24.599Z,1510161744.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:24.994Z,1510161744.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:25.015Z,1510161745.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:25.389Z,1510161745.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:25.406Z,1510161745.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:25.784Z,1510161745.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:25.804Z,1510161745.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:26.167Z,1510161746.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:26.209Z,1510161746.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:26.567Z,1510161746.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:26.602Z,1510161746.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:26.968Z,1510161746.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:27.024Z,1510161747.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:27.372Z,1510161747.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:27.407Z,1510161747.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:27.786Z,1510161747.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:27.808Z,1510161747.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:28.188Z,1510161748.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:28.205Z,1510161748.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:28.593Z,1510161748.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:28.609Z,1510161748.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:28.972Z,1510161748.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:29.010Z,1510161749.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:29.367Z,1510161749.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:29.404Z,1510161749.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:29.790Z,1510161749.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:29.813Z,1510161749.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:30.182Z,1510161750.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:30.214Z,1510161750.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:30.578Z,1510161750.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:30.604Z,1510161750.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:30.973Z,1510161750.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:31.009Z,1510161751.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:31.367Z,1510161751.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:31.407Z,1510161751.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:31.782Z,1510161751.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:31.818Z,1510161751.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:32.186Z,1510161752.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:32.213Z,1510161752.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:32.582Z,1510161752.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:32.614Z,1510161752.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:32.972Z,1510161752.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:32.989Z,1510161752.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:33.373Z,1510161753.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:33.405Z,1510161753.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:33.786Z,1510161753.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:33.820Z,1510161753.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:34.182Z,1510161754.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:34.198Z,1510161754.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:34.586Z,1510161754.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:34.642Z,1510161754.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:34.971Z,1510161754.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:34.988Z,1510161754.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:35.370Z,1510161755.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:35.427Z,1510161755.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:35.786Z,1510161755.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:35.824Z,1510161755.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:36.186Z,1510161756.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:36.235Z,1510161756.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:36.582Z,1510161756.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:36.598Z,1510161756.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:36.975Z,1510161756.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:36.991Z,1510161756.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:37.371Z,1510161757.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:37.387Z,1510161757.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:37.782Z,1510161757.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:37.798Z,1510161757.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:38.186Z,1510161758.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:38.221Z,1510161758.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:38.586Z,1510161758.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:38.620Z,1510161758.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:38.975Z,1510161758.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:38.991Z,1510161758.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:39.375Z,1510161759.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:39.395Z,1510161759.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:39.782Z,1510161759.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:39.799Z,1510161759.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:40.182Z,1510161760.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:40.198Z,1510161760.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:40.586Z,1510161760.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:40.621Z,1510161760.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:40.974Z,1510161760.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:40.990Z,1510161760.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:41.372Z,1510161761.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:41.388Z,1510161761.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:41.786Z,1510161761.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:41.822Z,1510161761.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:42.182Z,1510161762.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:42.198Z,1510161762.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:42.586Z,1510161762.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:42.602Z,1510161762.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:42.975Z,1510161762.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:42.991Z,1510161762.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:43.373Z,1510161763.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:43.389Z,1510161763.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:43.778Z,1510161763.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:43.794Z,1510161763.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:44.189Z,1510161764.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:44.222Z,1510161764.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:44.582Z,1510161764.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:44.635Z,1510161764.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:44.975Z,1510161764.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:44.992Z,1510161764.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:45.378Z,1510161765.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:45.395Z,1510161765.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:45.782Z,1510161765.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:45.799Z,1510161765.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:46.182Z,1510161766.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:46.198Z,1510161766.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:46.586Z,1510161766.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:46.608Z,1510161766.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:46.977Z,1510161766.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:46.994Z,1510161766.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:47.379Z,1510161767.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:47.396Z,1510161767.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:47.788Z,1510161767.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:47.805Z,1510161767.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:48.189Z,1510161768.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:48.314Z,1510161768.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:48.587Z,1510161768.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:48.608Z,1510161768.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:48.989Z,1510161768.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:49.011Z,1510161769.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:49.368Z,1510161769.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:49.402Z,1510161769.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:49.786Z,1510161769.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:49.802Z,1510161769.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:50.194Z,1510161770.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:50.210Z,1510161770.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:50.590Z,1510161770.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:50.605Z,1510161770.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:50.968Z,1510161770.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:51.004Z,1510161771.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:51.372Z,1510161771.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:51.404Z,1510161771.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:51.789Z,1510161771.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:51.806Z,1510161771.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:52.186Z,1510161772.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:52.210Z,1510161772.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:52.593Z,1510161772.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:52.610Z,1510161772.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:52.968Z,1510161772.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:52.000Z,1510161773.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:53.371Z,1510161773.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:53.404Z,1510161773.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:53.797Z,1510161773.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:53.814Z,1510161773.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:54.186Z,1510161774.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:54.219Z,1510161774.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:54.297Z,1510161774.297 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T17:22:54.578Z,1510161774.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:54.611Z,1510161774.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:54.973Z,1510161774.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:55.005Z,1510161775.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:55.372Z,1510161775.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:55.389Z,1510161775.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:55.783Z,1510161775.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:55.840Z,1510161775.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:56.190Z,1510161776.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:56.224Z,1510161776.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:56.587Z,1510161776.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:56.651Z,1510161776.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:56.972Z,1510161776.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:56.989Z,1510161776.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:57.376Z,1510161777.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:57.419Z,1510161777.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:57.786Z,1510161777.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:57.818Z,1510161777.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:58.186Z,1510161778.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:58.235Z,1510161778.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:58.589Z,1510161778.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:58.624Z,1510161778.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:58.972Z,1510161778.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:58.988Z,1510161778.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:59.371Z,1510161779.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:59.387Z,1510161779.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:22:59.772Z,1510161779.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:22:59.787Z,1510161779.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:00.173Z,1510161780.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:00.189Z,1510161780.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:00.572Z,1510161780.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:00.588Z,1510161780.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:00.989Z,1510161780.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:01.017Z,1510161781.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:01.386Z,1510161781.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:01.419Z,1510161781.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:01.783Z,1510161781.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:01.807Z,1510161781.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:02.170Z,1510161782.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:02.187Z,1510161782.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:02.571Z,1510161782.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:02.588Z,1510161782.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:02.970Z,1510161782.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:02.987Z,1510161782.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:03.374Z,1510161783.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:03.423Z,1510161783.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:03.807Z,1510161783.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:03.843Z,1510161783.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:04.182Z,1510161784.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:04.199Z,1510161784.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:04.587Z,1510161784.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:04.604Z,1510161784.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:04.979Z,1510161784.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:05.003Z,1510161785.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:05.374Z,1510161785.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:05.391Z,1510161785.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:05.788Z,1510161785.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:05.832Z,1510161785.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:06.189Z,1510161786.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:06.205Z,1510161786.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:06.587Z,1510161786.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:06.635Z,1510161786.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:06.979Z,1510161786.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:06.995Z,1510161786.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:07.370Z,1510161787.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:07.401Z,1510161787.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:07.786Z,1510161787.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:07.808Z,1510161787.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:08.189Z,1510161788.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:08.205Z,1510161788.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:11.278Z,1510161791.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:11.295Z,1510161791.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:11.411Z,1510161791.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:11.455Z,1510161791.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:11.811Z,1510161791.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:11.837Z,1510161791.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:12.212Z,1510161792.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:12.237Z,1510161792.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:12.603Z,1510161792.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:12.639Z,1510161792.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:13.028Z,1510161793.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:13.045Z,1510161793.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:13.426Z,1510161793.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:13.443Z,1510161793.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:13.813Z,1510161793.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:13.846Z,1510161793.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:14.203Z,1510161794.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:14.243Z,1510161794.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:14.608Z,1510161794.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:14.640Z,1510161794.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:15.007Z,1510161795.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:15.049Z,1510161795.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:15.408Z,1510161795.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:15.423Z,1510161795.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:15.822Z,1510161795.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:15.852Z,1510161795.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:16.221Z,1510161796.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:16.252Z,1510161796.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:16.621Z,1510161796.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:16.651Z,1510161796.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:17.007Z,1510161797.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:17.024Z,1510161797.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:17.403Z,1510161797.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:17.471Z,1510161797.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:17.810Z,1510161797.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:17.826Z,1510161797.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:18.214Z,1510161798.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:18.231Z,1510161798.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:18.610Z,1510161798.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:18.679Z,1510161798.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:19.021Z,1510161799.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:19.059Z,1510161799.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:19.421Z,1510161799.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:19.475Z,1510161799.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:19.817Z,1510161799.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:19.856Z,1510161799.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:20.211Z,1510161800.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:20.267Z,1510161800.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:20.610Z,1510161800.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:20.626Z,1510161800.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:21.009Z,1510161801.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:21.025Z,1510161801.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:21.410Z,1510161801.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:21.426Z,1510161801.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:21.822Z,1510161801.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:21.838Z,1510161801.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:22.221Z,1510161802.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:22.238Z,1510161802.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:22.621Z,1510161802.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:22.663Z,1510161802.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:23.011Z,1510161803.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:23.031Z,1510161803.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:23.410Z,1510161803.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:23.426Z,1510161803.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:23.809Z,1510161803.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:23.831Z,1510161803.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:24.211Z,1510161804.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:24.231Z,1510161804.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:24.608Z,1510161804.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:24.624Z,1510161804.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:25.021Z,1510161805.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:25.037Z,1510161805.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:25.422Z,1510161805.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:25.438Z,1510161805.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:25.821Z,1510161805.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:25.838Z,1510161805.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:26.211Z,1510161806.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:26.227Z,1510161806.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:26.611Z,1510161806.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:26.631Z,1510161806.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:27.009Z,1510161807.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:27.025Z,1510161807.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:27.412Z,1510161807.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:27.427Z,1510161807.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:27.822Z,1510161807.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:27.838Z,1510161807.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:28.221Z,1510161808.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:28.238Z,1510161808.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:28.625Z,1510161808.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:28.673Z,1510161808.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:29.011Z,1510161809.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:29.031Z,1510161809.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:29.410Z,1510161809.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:29.427Z,1510161809.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:29.812Z,1510161809.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:29.827Z,1510161809.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:30.216Z,1510161810.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:30.232Z,1510161810.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:30.611Z,1510161810.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:30.627Z,1510161810.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:31.021Z,1510161811.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:31.037Z,1510161811.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:31.421Z,1510161811.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:31.460Z,1510161811.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:31.818Z,1510161811.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:31.834Z,1510161811.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:32.214Z,1510161812.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:32.230Z,1510161812.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:32.610Z,1510161812.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:32.626Z,1510161812.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:33.014Z,1510161813.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:33.030Z,1510161813.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:33.413Z,1510161813.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:33.430Z,1510161813.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:33.818Z,1510161813.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:33.840Z,1510161813.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:34.220Z,1510161814.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:34.237Z,1510161814.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:34.621Z,1510161814.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:34.643Z,1510161814.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:35.009Z,1510161815.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:35.025Z,1510161815.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:35.413Z,1510161815.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:35.429Z,1510161815.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:35.814Z,1510161815.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:35.830Z,1510161815.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:36.209Z,1510161816.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:36.230Z,1510161816.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:36.614Z,1510161816.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:36.630Z,1510161816.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:37.022Z,1510161817.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:37.043Z,1510161817.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:37.418Z,1510161817.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:37.440Z,1510161817.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:37.818Z,1510161817.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:37.835Z,1510161817.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:38.214Z,1510161818.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:38.230Z,1510161818.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:38.613Z,1510161818.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:38.630Z,1510161818.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:39.014Z,1510161819.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:39.030Z,1510161819.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:39.412Z,1510161819.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:39.461Z,1510161819.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:39.819Z,1510161819.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:39.844Z,1510161819.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:40.221Z,1510161820.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:40.238Z,1510161820.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:40.621Z,1510161820.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:40.687Z,1510161820.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:41.006Z,1510161821.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:41.030Z,1510161821.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:41.409Z,1510161821.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:41.426Z,1510161821.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:41.809Z,1510161821.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:41.868Z,1510161821.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:42.215Z,1510161822.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:42.235Z,1510161822.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:42.614Z,1510161822.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:42.670Z,1510161822.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:43.023Z,1510161823.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:43.039Z,1510161823.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:43.420Z,1510161823.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:43.445Z,1510161823.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:43.825Z,1510161823.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:43.841Z,1510161823.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:44.211Z,1510161824.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:44.234Z,1510161824.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:44.613Z,1510161824.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:44.632Z,1510161824.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:45.014Z,1510161825.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:45.031Z,1510161825.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:45.414Z,1510161825.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:45.430Z,1510161825.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:45.823Z,1510161825.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:45.841Z,1510161825.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:46.226Z,1510161826.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:46.243Z,1510161826.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:46.624Z,1510161826.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:46.641Z,1510161826.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:47.003Z,1510161827.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:47.037Z,1510161827.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:47.403Z,1510161827.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:47.434Z,1510161827.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:47.814Z,1510161827.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:47.830Z,1510161827.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:48.214Z,1510161828.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:48.235Z,1510161828.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:48.613Z,1510161828.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:48.629Z,1510161828.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:49.027Z,1510161829.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:49.044Z,1510161829.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:49.426Z,1510161829.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:49.444Z,1510161829.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:49.824Z,1510161829.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:49.840Z,1510161829.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:50.214Z,1510161830.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:50.230Z,1510161830.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:50.613Z,1510161830.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:50.629Z,1510161830.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:51.014Z,1510161831.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:51.069Z,1510161831.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:51.414Z,1510161831.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:51.440Z,1510161831.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:51.823Z,1510161831.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:51.840Z,1510161831.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:52.226Z,1510161832.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:52.243Z,1510161832.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:52.627Z,1510161832.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:52.643Z,1510161832.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:53.014Z,1510161833.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:53.030Z,1510161833.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:53.413Z,1510161833.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:53.430Z,1510161833.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:53.811Z,1510161833.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:53.834Z,1510161833.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:54.214Z,1510161834.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:54.236Z,1510161834.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:54.613Z,1510161834.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:54.630Z,1510161834.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:55.027Z,1510161835.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:55.044Z,1510161835.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:55.427Z,1510161835.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:55.444Z,1510161835.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:55.824Z,1510161835.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:55.892Z,1510161835.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:56.211Z,1510161836.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:56.239Z,1510161836.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:56.613Z,1510161836.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:56.635Z,1510161836.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:57.014Z,1510161837.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:57.035Z,1510161837.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:57.411Z,1510161837.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:57.447Z,1510161837.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:57.824Z,1510161837.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:57.840Z,1510161837.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:58.227Z,1510161838.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:58.244Z,1510161838.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:58.628Z,1510161838.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:58.644Z,1510161838.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:59.013Z,1510161839.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:59.036Z,1510161839.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:59.413Z,1510161839.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:59.430Z,1510161839.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:23:59.811Z,1510161839.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:23:59.840Z,1510161839.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:00.208Z,1510161840.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:00.234Z,1510161840.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:00.607Z,1510161840.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:00.638Z,1510161840.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:01.029Z,1510161841.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:01.045Z,1510161841.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:01.424Z,1510161841.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:01.497Z,1510161841.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:01.824Z,1510161841.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:01.841Z,1510161841.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:02.208Z,1510161842.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:02.236Z,1510161842.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:02.607Z,1510161842.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:02.677Z,1510161842.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:03.008Z,1510161843.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:03.033Z,1510161843.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:03.408Z,1510161843.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:03.477Z,1510161843.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:03.824Z,1510161843.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:03.840Z,1510161843.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:04.224Z,1510161844.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:04.244Z,1510161844.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:04.629Z,1510161844.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:04.645Z,1510161844.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:05.007Z,1510161845.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:05.032Z,1510161845.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:05.407Z,1510161845.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:05.432Z,1510161845.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:05.807Z,1510161845.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:05.834Z,1510161845.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:06.208Z,1510161846.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:06.233Z,1510161846.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:06.607Z,1510161846.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:06.632Z,1510161846.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:07.029Z,1510161847.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:07.045Z,1510161847.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:07.429Z,1510161847.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:07.445Z,1510161847.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:07.824Z,1510161847.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:07.841Z,1510161847.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:08.211Z,1510161848.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:08.239Z,1510161848.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:11.295Z,1510161851.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:11.312Z,1510161851.312 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:11.329Z,1510161851.329 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80
2017-11-08T17:24:11.329Z,1510161851.329 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T17:24:11.330Z,1510161851.330 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:11.331Z,1510161851.331 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80
2017-11-08T17:24:11.331Z,1510161851.331 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T17:24:11.332Z,1510161851.332 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:11.337Z,1510161851.337 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 80
2017-11-08T17:24:11.337Z,1510161851.337 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T17:24:11.339Z,1510161851.339 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T17:19:11.1Z
2017-11-08T17:24:11.339Z,1510161851.339 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T17:24:11.339Z,1510161851.339 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T17:24:11.421Z,1510161851.421 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T17:24:11.421Z,1510161851.421 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T17:24:11.421Z,1510161851.421 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T17:24:11.449Z,1510161851.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:11.585Z,1510161851.585 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T17:24:11.585Z,1510161851.585 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80
2017-11-08T17:24:11.585Z,1510161851.585 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T17:24:11.585Z,1510161851.585 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80
2017-11-08T17:24:11.586Z,1510161851.586 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T17:24:11.586Z,1510161851.586 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 80
2017-11-08T17:24:12.143Z,1510161852.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:12.159Z,1510161852.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T17:24:12.159Z,1510161852.159 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:24:12.160Z,1510161852.160 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:24:12.160Z,1510161852.160 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T17:24:12.160Z,1510161852.160 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:24:12.161Z,1510161852.161 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:24:12.161Z,1510161852.161 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T17:24:12.162Z,1510161852.162 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:24:12.162Z,1510161852.162 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:24:12.347Z,1510161852.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:12.386Z,1510161852.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.1 s old, using for 20.0 s.
2017-11-08T17:24:12.387Z,1510161852.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:12.740Z,1510161852.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:12.755Z,1510161852.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2017-11-08T17:24:12.757Z,1510161852.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:13.130Z,1510161853.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:13.146Z,1510161853.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2017-11-08T17:24:13.147Z,1510161853.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:16.201Z,1510161856.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:16.217Z,1510161856.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-08T17:24:16.218Z,1510161856.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:16.337Z,1510161856.337 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171108T132236/Courier0044.lzma
2017-11-08T17:24:16.363Z,1510161856.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:16.403Z,1510161856.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2017-11-08T17:24:16.404Z,1510161856.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:16.781Z,1510161856.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:16.797Z,1510161856.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-11-08T17:24:16.798Z,1510161856.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:17.138Z,1510161857.138 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0044.lzma.bak
2017-11-08T17:24:17.139Z,1510161857.139 [DataOverHttps](INFO): SBD MOMSN=5223090
2017-11-08T17:24:17.200Z,1510161857.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:17.222Z,1510161857.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2017-11-08T17:24:17.223Z,1510161857.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:18.121Z,1510161858.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:18.147Z,1510161858.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T17:24:18.148Z,1510161858.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:18.264Z,1510161858.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:18.301Z,1510161858.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2017-11-08T17:24:18.302Z,1510161858.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:21.387Z,1510161861.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:21.405Z,1510161861.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T17:24:21.406Z,1510161861.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:21.513Z,1510161861.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:21.554Z,1510161861.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2017-11-08T17:24:21.555Z,1510161861.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:21.930Z,1510161861.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:21.979Z,1510161861.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2017-11-08T17:24:21.981Z,1510161861.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:22.333Z,1510161862.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:22.383Z,1510161862.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2017-11-08T17:24:22.384Z,1510161862.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:22.738Z,1510161862.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:22.761Z,1510161862.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2017-11-08T17:24:22.762Z,1510161862.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:23.118Z,1510161863.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:23.134Z,1510161863.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2017-11-08T17:24:23.135Z,1510161863.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:23.518Z,1510161863.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:23.578Z,1510161863.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2017-11-08T17:24:23.579Z,1510161863.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:26.603Z,1510161866.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:26.619Z,1510161866.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T17:24:26.620Z,1510161866.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:26.735Z,1510161866.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:26.812Z,1510161866.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2017-11-08T17:24:26.813Z,1510161866.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:27.113Z,1510161867.113 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20171108T132236/Express0045.lzma
2017-11-08T17:24:27.167Z,1510161867.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:27.183Z,1510161867.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2017-11-08T17:24:27.183Z,1510161867.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:27.546Z,1510161867.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:27.579Z,1510161867.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2017-11-08T17:24:27.580Z,1510161867.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:27.910Z,1510161867.910 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0045.lzma.bak
2017-11-08T17:24:27.910Z,1510161867.910 [DataOverHttps](INFO): SBD MOMSN=5223092
2017-11-08T17:24:27.958Z,1510161867.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:27.987Z,1510161867.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2017-11-08T17:24:27.988Z,1510161867.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:28.879Z,1510161868.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:28.895Z,1510161868.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T17:24:28.896Z,1510161868.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:28.925Z,1510161868.925 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T17:24:28.925Z,1510161868.925 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T17:24:28.925Z,1510161868.925 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T17:24:29.027Z,1510161869.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:29.070Z,1510161869.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-11-08T17:24:29.071Z,1510161869.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:29.435Z,1510161869.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:29.469Z,1510161869.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-11-08T17:24:29.470Z,1510161869.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:32.526Z,1510161872.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:32.542Z,1510161872.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:32.693Z,1510161872.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:32.740Z,1510161872.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:33.103Z,1510161873.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:33.120Z,1510161873.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:33.483Z,1510161873.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:33.520Z,1510161873.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:33.879Z,1510161873.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:33.916Z,1510161873.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:34.284Z,1510161874.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:34.322Z,1510161874.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:34.683Z,1510161874.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:34.699Z,1510161874.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:35.094Z,1510161875.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:35.162Z,1510161875.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:35.497Z,1510161875.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:35.529Z,1510161875.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:35.897Z,1510161875.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:35.922Z,1510161875.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:36.283Z,1510161876.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:36.319Z,1510161876.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:36.683Z,1510161876.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:36.700Z,1510161876.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:37.080Z,1510161877.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:37.096Z,1510161877.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:37.483Z,1510161877.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:37.503Z,1510161877.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:37.898Z,1510161877.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:37.930Z,1510161877.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:38.301Z,1510161878.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:38.331Z,1510161878.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:38.718Z,1510161878.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:38.735Z,1510161878.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:39.083Z,1510161879.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:39.127Z,1510161879.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:39.504Z,1510161879.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:39.563Z,1510161879.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:39.885Z,1510161879.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:39.932Z,1510161879.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:40.312Z,1510161880.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:40.380Z,1510161880.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:40.683Z,1510161880.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:40.709Z,1510161880.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:41.099Z,1510161881.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:41.115Z,1510161881.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:41.503Z,1510161881.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:41.518Z,1510161881.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:41.905Z,1510161881.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:41.921Z,1510161881.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:42.279Z,1510161882.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:42.310Z,1510161882.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:42.683Z,1510161882.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:42.707Z,1510161882.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:43.084Z,1510161883.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:43.115Z,1510161883.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:43.479Z,1510161883.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:43.508Z,1510161883.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:43.900Z,1510161883.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:43.916Z,1510161883.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:44.301Z,1510161884.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:44.317Z,1510161884.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:44.700Z,1510161884.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:44.716Z,1510161884.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:45.079Z,1510161885.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:45.113Z,1510161885.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:45.484Z,1510161885.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:45.515Z,1510161885.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:45.879Z,1510161885.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:45.956Z,1510161885.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:46.279Z,1510161886.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:46.296Z,1510161886.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:46.683Z,1510161886.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:46.736Z,1510161886.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:47.098Z,1510161887.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:47.128Z,1510161887.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:47.493Z,1510161887.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:47.545Z,1510161887.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:47.898Z,1510161887.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:47.931Z,1510161887.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:48.279Z,1510161888.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:48.299Z,1510161888.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:48.683Z,1510161888.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:48.698Z,1510161888.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:49.084Z,1510161889.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:49.122Z,1510161889.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:49.479Z,1510161889.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:49.499Z,1510161889.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:49.866Z,1510161889.866 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T17:24:49.866Z,1510161889.866 [NAL9602] Data Fault, FailCount= 3
2017-11-08T17:24:49.866Z,1510161889.866 [NAL9602](ERROR): Data Fault
2017-11-08T17:24:49.883Z,1510161889.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:49.899Z,1510161889.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:50.004Z,1510161890.004 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T17:24:50.270Z,1510161890.270 [NAL9602](INFO): Powering down
2017-11-08T17:24:50.288Z,1510161890.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:50.332Z,1510161890.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:50.685Z,1510161890.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:50.702Z,1510161890.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:51.081Z,1510161891.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:51.097Z,1510161891.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:51.172Z,1510161891.172 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T17:24:51.173Z,1510161891.173 [NAL9602] No Fault, FailCount= 3
2017-11-08T17:24:51.486Z,1510161891.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:51.502Z,1510161891.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:51.881Z,1510161891.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:51.898Z,1510161891.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:52.282Z,1510161892.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:52.298Z,1510161892.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:52.686Z,1510161892.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:52.702Z,1510161892.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:53.082Z,1510161893.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:53.098Z,1510161893.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:53.482Z,1510161893.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:53.498Z,1510161893.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:53.886Z,1510161893.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:53.902Z,1510161893.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:54.282Z,1510161894.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:54.298Z,1510161894.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:54.682Z,1510161894.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:54.703Z,1510161894.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:55.086Z,1510161895.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:55.102Z,1510161895.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:55.486Z,1510161895.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:55.502Z,1510161895.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:55.882Z,1510161895.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:55.933Z,1510161895.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:56.286Z,1510161896.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:56.303Z,1510161896.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:56.687Z,1510161896.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:56.703Z,1510161896.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:57.087Z,1510161897.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:57.103Z,1510161897.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:57.482Z,1510161897.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:57.499Z,1510161897.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:57.886Z,1510161897.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:57.902Z,1510161897.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:58.283Z,1510161898.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:58.298Z,1510161898.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:58.682Z,1510161898.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:58.699Z,1510161898.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:59.086Z,1510161899.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:59.103Z,1510161899.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:59.482Z,1510161899.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:59.498Z,1510161899.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:24:59.882Z,1510161899.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:24:59.898Z,1510161899.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:00.286Z,1510161900.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:00.303Z,1510161900.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:00.681Z,1510161900.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:00.697Z,1510161900.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:01.082Z,1510161901.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:01.097Z,1510161901.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:01.486Z,1510161901.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:01.502Z,1510161901.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:01.882Z,1510161901.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:01.903Z,1510161901.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:02.287Z,1510161902.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:02.307Z,1510161902.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:02.687Z,1510161902.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:02.707Z,1510161902.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:03.086Z,1510161903.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:03.102Z,1510161903.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:03.482Z,1510161903.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:03.498Z,1510161903.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:03.887Z,1510161903.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:03.904Z,1510161903.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:04.284Z,1510161904.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:04.307Z,1510161904.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:04.686Z,1510161904.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:04.702Z,1510161904.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:05.086Z,1510161905.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:05.104Z,1510161905.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:05.486Z,1510161905.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:05.502Z,1510161905.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:05.886Z,1510161905.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:05.902Z,1510161905.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:06.290Z,1510161906.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:06.307Z,1510161906.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:06.682Z,1510161906.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:06.735Z,1510161906.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:07.090Z,1510161907.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:07.105Z,1510161907.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:07.489Z,1510161907.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:07.505Z,1510161907.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:07.885Z,1510161907.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:07.907Z,1510161907.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:08.284Z,1510161908.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:08.333Z,1510161908.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:08.688Z,1510161908.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:08.705Z,1510161908.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:09.084Z,1510161909.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:09.124Z,1510161909.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:09.488Z,1510161909.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:09.505Z,1510161909.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:09.888Z,1510161909.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:09.943Z,1510161909.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:10.288Z,1510161910.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:10.304Z,1510161910.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:10.684Z,1510161910.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:10.700Z,1510161910.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:11.089Z,1510161911.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:11.105Z,1510161911.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:11.484Z,1510161911.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:11.500Z,1510161911.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:11.884Z,1510161911.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:11.900Z,1510161911.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:12.289Z,1510161912.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:12.305Z,1510161912.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:12.684Z,1510161912.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:12.707Z,1510161912.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:13.084Z,1510161913.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:13.100Z,1510161913.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:13.493Z,1510161913.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:13.509Z,1510161913.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:13.884Z,1510161913.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:13.907Z,1510161913.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:14.284Z,1510161914.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:14.300Z,1510161914.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:14.688Z,1510161914.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:14.704Z,1510161914.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:15.084Z,1510161915.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:15.100Z,1510161915.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:15.484Z,1510161915.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:15.507Z,1510161915.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:15.889Z,1510161915.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:15.905Z,1510161915.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:16.284Z,1510161916.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:16.300Z,1510161916.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:16.688Z,1510161916.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:16.704Z,1510161916.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:17.088Z,1510161917.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:17.104Z,1510161917.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:17.484Z,1510161917.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:17.507Z,1510161917.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:17.884Z,1510161917.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:17.900Z,1510161917.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:18.289Z,1510161918.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:18.347Z,1510161918.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:18.703Z,1510161918.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:18.741Z,1510161918.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:19.088Z,1510161919.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:19.104Z,1510161919.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:19.488Z,1510161919.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:19.504Z,1510161919.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:19.884Z,1510161919.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:19.907Z,1510161919.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:20.288Z,1510161920.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:20.304Z,1510161920.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:20.666Z,1510161920.666 [NAL9602](INFO): Powering up NAL9602
2017-11-08T17:25:20.691Z,1510161920.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:20.716Z,1510161920.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:21.084Z,1510161921.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:21.100Z,1510161921.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:21.483Z,1510161921.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:21.519Z,1510161921.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:21.886Z,1510161921.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:21.902Z,1510161921.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:22.283Z,1510161922.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:22.299Z,1510161922.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:22.685Z,1510161922.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:22.701Z,1510161922.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:23.086Z,1510161923.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:23.102Z,1510161923.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:23.483Z,1510161923.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:23.499Z,1510161923.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:23.883Z,1510161923.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:23.899Z,1510161923.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:24.286Z,1510161924.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:24.302Z,1510161924.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:24.683Z,1510161924.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:24.699Z,1510161924.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:25.084Z,1510161925.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:25.101Z,1510161925.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:25.486Z,1510161925.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:25.502Z,1510161925.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:25.883Z,1510161925.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:25.903Z,1510161925.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:26.284Z,1510161926.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:26.303Z,1510161926.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:26.686Z,1510161926.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:26.702Z,1510161926.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:27.085Z,1510161927.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:27.107Z,1510161927.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:27.485Z,1510161927.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:27.501Z,1510161927.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:27.886Z,1510161927.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:27.903Z,1510161927.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:28.284Z,1510161928.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:28.300Z,1510161928.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:28.684Z,1510161928.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:28.700Z,1510161928.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:29.086Z,1510161929.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:29.147Z,1510161929.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:29.489Z,1510161929.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:29.504Z,1510161929.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:32.570Z,1510161932.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:32.613Z,1510161932.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:32.762Z,1510161932.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:32.795Z,1510161932.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:33.134Z,1510161933.134 [NAL9602](INFO): NAL9602 initialized
2017-11-08T17:25:33.152Z,1510161933.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:33.189Z,1510161933.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:33.554Z,1510161933.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:33.599Z,1510161933.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:33.966Z,1510161933.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:33.998Z,1510161933.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:34.358Z,1510161934.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:34.410Z,1510161934.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:34.758Z,1510161934.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:34.773Z,1510161934.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:35.148Z,1510161935.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:35.177Z,1510161935.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:35.550Z,1510161935.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:35.566Z,1510161935.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:35.949Z,1510161935.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:35.965Z,1510161935.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:36.362Z,1510161936.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:36.378Z,1510161936.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:36.762Z,1510161936.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:36.778Z,1510161936.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:37.155Z,1510161937.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:37.171Z,1510161937.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:37.552Z,1510161937.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:37.569Z,1510161937.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:37.949Z,1510161937.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:37.965Z,1510161937.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:38.350Z,1510161938.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:38.366Z,1510161938.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:38.754Z,1510161938.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:38.771Z,1510161938.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:39.153Z,1510161939.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:39.169Z,1510161939.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:39.559Z,1510161939.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:39.575Z,1510161939.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:39.962Z,1510161939.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:39.978Z,1510161939.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:40.359Z,1510161940.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:40.379Z,1510161940.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:40.750Z,1510161940.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:40.766Z,1510161940.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:41.151Z,1510161941.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:41.167Z,1510161941.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:41.552Z,1510161941.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:41.580Z,1510161941.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:41.952Z,1510161941.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:41.968Z,1510161941.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:42.363Z,1510161942.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:42.380Z,1510161942.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:42.763Z,1510161942.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:42.819Z,1510161942.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:43.160Z,1510161943.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:43.183Z,1510161943.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:43.554Z,1510161943.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:43.571Z,1510161943.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:43.951Z,1510161943.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:43.973Z,1510161943.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:44.349Z,1510161944.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:44.372Z,1510161944.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:44.751Z,1510161944.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:44.767Z,1510161944.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:45.154Z,1510161945.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:45.175Z,1510161945.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:45.560Z,1510161945.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:45.576Z,1510161945.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:45.963Z,1510161945.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:45.980Z,1510161945.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:46.363Z,1510161946.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:46.383Z,1510161946.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:46.743Z,1510161946.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:46.768Z,1510161946.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:47.154Z,1510161947.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:47.171Z,1510161947.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:47.550Z,1510161947.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:47.582Z,1510161947.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:47.943Z,1510161947.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:47.968Z,1510161947.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:48.368Z,1510161948.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:48.384Z,1510161948.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:48.767Z,1510161948.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:48.783Z,1510161948.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:49.159Z,1510161949.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:49.175Z,1510161949.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:49.543Z,1510161949.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:49.573Z,1510161949.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:49.947Z,1510161949.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:49.979Z,1510161949.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:50.343Z,1510161950.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:50.372Z,1510161950.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:50.748Z,1510161950.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:50.776Z,1510161950.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:51.147Z,1510161951.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:51.180Z,1510161951.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:51.564Z,1510161951.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:51.580Z,1510161951.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:51.964Z,1510161951.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:51.981Z,1510161951.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:52.364Z,1510161952.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:52.381Z,1510161952.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:52.744Z,1510161952.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:52.778Z,1510161952.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:53.156Z,1510161953.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:53.176Z,1510161953.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:53.556Z,1510161953.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:53.600Z,1510161953.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:53.947Z,1510161953.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:53.973Z,1510161953.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:54.365Z,1510161954.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:54.382Z,1510161954.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:54.762Z,1510161954.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:54.833Z,1510161954.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:55.157Z,1510161955.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:55.183Z,1510161955.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:55.543Z,1510161955.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:55.560Z,1510161955.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:55.947Z,1510161955.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:56.007Z,1510161956.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:56.347Z,1510161956.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:56.362Z,1510161956.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:56.744Z,1510161956.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:56.795Z,1510161956.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:57.143Z,1510161957.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:57.163Z,1510161957.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:57.569Z,1510161957.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:57.601Z,1510161957.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:57.957Z,1510161957.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:57.973Z,1510161957.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:58.362Z,1510161958.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:58.378Z,1510161958.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:58.749Z,1510161958.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:58.771Z,1510161958.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:59.153Z,1510161959.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:59.169Z,1510161959.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:59.553Z,1510161959.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:59.569Z,1510161959.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:25:59.949Z,1510161959.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:25:59.965Z,1510161959.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:00.358Z,1510161960.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:00.374Z,1510161960.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:00.762Z,1510161960.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:00.778Z,1510161960.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:01.154Z,1510161961.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:01.170Z,1510161961.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:01.550Z,1510161961.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:01.566Z,1510161961.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:01.949Z,1510161961.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:01.965Z,1510161961.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:02.349Z,1510161962.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:02.371Z,1510161962.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:02.750Z,1510161962.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:02.767Z,1510161962.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:03.149Z,1510161963.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:03.165Z,1510161963.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:03.554Z,1510161963.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:03.570Z,1510161963.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:03.958Z,1510161963.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:03.974Z,1510161963.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:04.362Z,1510161964.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:04.378Z,1510161964.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:04.749Z,1510161964.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:04.765Z,1510161964.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:05.150Z,1510161965.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:05.211Z,1510161965.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:05.553Z,1510161965.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:05.570Z,1510161965.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:05.949Z,1510161965.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:05.971Z,1510161965.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:06.358Z,1510161966.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:06.374Z,1510161966.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:06.762Z,1510161966.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:06.778Z,1510161966.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:07.154Z,1510161967.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:07.170Z,1510161967.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:07.553Z,1510161967.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:07.570Z,1510161967.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:07.953Z,1510161967.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:07.969Z,1510161967.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:08.349Z,1510161968.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:08.365Z,1510161968.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:08.750Z,1510161968.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:08.767Z,1510161968.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:09.152Z,1510161969.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:09.175Z,1510161969.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:09.554Z,1510161969.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:09.570Z,1510161969.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:09.957Z,1510161969.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:09.974Z,1510161969.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:10.358Z,1510161970.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:10.374Z,1510161970.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:10.749Z,1510161970.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:10.765Z,1510161970.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:11.150Z,1510161971.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:11.166Z,1510161971.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:11.553Z,1510161971.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:11.569Z,1510161971.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:11.948Z,1510161971.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:11.964Z,1510161971.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:12.358Z,1510161972.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:12.374Z,1510161972.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:12.762Z,1510161972.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:12.778Z,1510161972.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:13.158Z,1510161973.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:13.174Z,1510161973.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:13.551Z,1510161973.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:13.567Z,1510161973.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:13.951Z,1510161973.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:13.972Z,1510161973.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:14.347Z,1510161974.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:14.367Z,1510161974.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:14.751Z,1510161974.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:14.767Z,1510161974.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:15.153Z,1510161975.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:15.169Z,1510161975.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:15.558Z,1510161975.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:15.574Z,1510161975.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:15.957Z,1510161975.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:16.027Z,1510161976.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:16.362Z,1510161976.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:16.384Z,1510161976.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:16.753Z,1510161976.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:16.775Z,1510161976.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:17.151Z,1510161977.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:17.227Z,1510161977.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:17.555Z,1510161977.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:17.575Z,1510161977.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:17.953Z,1510161977.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:17.970Z,1510161977.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:18.364Z,1510161978.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:18.422Z,1510161978.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:18.763Z,1510161978.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:18.784Z,1510161978.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:19.163Z,1510161979.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:19.214Z,1510161979.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:19.555Z,1510161979.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:19.571Z,1510161979.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:19.947Z,1510161979.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:19.976Z,1510161979.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:20.343Z,1510161980.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:20.371Z,1510161980.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:20.745Z,1510161980.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:20.777Z,1510161980.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:21.144Z,1510161981.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:21.178Z,1510161981.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:21.564Z,1510161981.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:21.580Z,1510161981.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:21.966Z,1510161981.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:21.982Z,1510161981.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:22.365Z,1510161982.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:22.381Z,1510161982.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:22.747Z,1510161982.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:22.772Z,1510161982.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:23.147Z,1510161983.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:23.174Z,1510161983.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:23.548Z,1510161983.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:23.575Z,1510161983.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:23.947Z,1510161983.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:23.972Z,1510161983.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:24.369Z,1510161984.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:24.386Z,1510161984.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:24.764Z,1510161984.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:24.780Z,1510161984.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:25.160Z,1510161985.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:25.183Z,1510161985.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:25.544Z,1510161985.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:25.579Z,1510161985.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:25.944Z,1510161985.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:25.976Z,1510161985.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:26.347Z,1510161986.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:26.382Z,1510161986.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:26.745Z,1510161986.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:26.773Z,1510161986.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:27.147Z,1510161987.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:27.182Z,1510161987.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:27.568Z,1510161987.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:27.625Z,1510161987.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:27.957Z,1510161987.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:27.989Z,1510161987.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:28.358Z,1510161988.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:28.384Z,1510161988.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:28.747Z,1510161988.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:28.763Z,1510161988.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:29.147Z,1510161989.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:29.164Z,1510161989.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:29.552Z,1510161989.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:29.590Z,1510161989.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:29.672Z,1510161989.672 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:26:29.673Z,1510161989.673 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T17:26:30.005Z,1510161990.005 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:26:30.006Z,1510161990.006 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:26:30.006Z,1510161990.006 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:26:30.006Z,1510161990.006 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T17:26:30.006Z,1510161990.006 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:26:30.409Z,1510161990.409 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:26:30.558Z,1510161990.558 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:26:32.758Z,1510161992.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:32.790Z,1510161992.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:32.875Z,1510161992.875 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:26:32.875Z,1510161992.875 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:26:32.875Z,1510161992.875 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T17:26:32.939Z,1510161992.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:32.956Z,1510161992.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:32.981Z,1510161992.981 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:26:32.981Z,1510161992.981 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:26:32.982Z,1510161992.982 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:26:32.982Z,1510161992.982 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T17:26:32.982Z,1510161992.982 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:26:33.037Z,1510161993.037 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:26:33.332Z,1510161993.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:33.348Z,1510161993.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:33.385Z,1510161993.385 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:26:33.518Z,1510161993.518 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:26:33.726Z,1510161993.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:33.764Z,1510161993.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:34.112Z,1510161994.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:34.129Z,1510161994.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:34.513Z,1510161994.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:34.534Z,1510161994.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:34.915Z,1510161994.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:34.931Z,1510161994.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:35.009Z,1510161995.009 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:26:35.009Z,1510161995.009 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T17:26:35.133Z,1510161995.133 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:26:35.133Z,1510161995.133 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:26:35.133Z,1510161995.133 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:26:35.133Z,1510161995.133 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T17:26:35.133Z,1510161995.133 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:26:35.319Z,1510161995.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:35.344Z,1510161995.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:35.433Z,1510161995.433 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:26:35.537Z,1510161995.537 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:26:35.630Z,1510161995.630 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:26:35.724Z,1510161995.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:35.743Z,1510161995.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:36.126Z,1510161996.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:36.142Z,1510161996.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:36.514Z,1510161996.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:36.531Z,1510161996.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:36.913Z,1510161996.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:36.930Z,1510161996.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:37.009Z,1510161997.009 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:26:37.009Z,1510161997.009 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T17:26:37.245Z,1510161997.245 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:26:37.246Z,1510161997.246 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:26:37.246Z,1510161997.246 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:26:37.246Z,1510161997.246 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T17:26:37.246Z,1510161997.246 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:26:37.310Z,1510161997.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:37.329Z,1510161997.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:37.405Z,1510161997.405 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:26:37.649Z,1510161997.649 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:26:37.710Z,1510161997.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:37.763Z,1510161997.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:37.868Z,1510161997.868 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:26:38.103Z,1510161998.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:38.139Z,1510161998.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:38.532Z,1510161998.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:38.550Z,1510161998.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:38.924Z,1510161998.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:38.942Z,1510161998.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:39.324Z,1510161999.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:39.403Z,1510161999.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:39.489Z,1510161999.489 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:26:39.489Z,1510161999.489 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T17:26:39.704Z,1510161999.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:39.762Z,1510161999.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:39.889Z,1510161999.889 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:26:39.889Z,1510161999.889 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:26:39.889Z,1510161999.889 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:26:39.889Z,1510161999.889 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T17:26:39.889Z,1510161999.889 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:26:40.104Z,1510162000.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:40.132Z,1510162000.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:40.217Z,1510162000.217 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:26:40.217Z,1510162000.217 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:26:40.293Z,1510162000.293 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:26:40.377Z,1510162000.377 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:26:40.510Z,1510162000.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:40.562Z,1510162000.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:40.907Z,1510162000.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:40.944Z,1510162000.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:41.326Z,1510162001.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:41.391Z,1510162001.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:41.728Z,1510162001.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:41.744Z,1510162001.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:42.130Z,1510162002.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:42.146Z,1510162002.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:42.507Z,1510162002.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:42.544Z,1510162002.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:42.907Z,1510162002.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:42.943Z,1510162002.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:43.307Z,1510162003.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:43.323Z,1510162003.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:43.708Z,1510162003.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:43.752Z,1510162003.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:44.111Z,1510162004.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:44.127Z,1510162004.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:44.521Z,1510162004.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:44.555Z,1510162004.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:44.926Z,1510162004.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:44.952Z,1510162004.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:45.321Z,1510162005.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:45.354Z,1510162005.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:45.708Z,1510162005.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:45.724Z,1510162005.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:46.108Z,1510162006.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:46.124Z,1510162006.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:46.512Z,1510162006.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:46.528Z,1510162006.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:46.908Z,1510162006.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:46.924Z,1510162006.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:47.322Z,1510162007.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:47.354Z,1510162007.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:47.722Z,1510162007.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:47.753Z,1510162007.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:48.126Z,1510162008.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:48.152Z,1510162008.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:48.511Z,1510162008.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:48.528Z,1510162008.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:48.910Z,1510162008.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:48.926Z,1510162008.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:49.310Z,1510162009.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:49.326Z,1510162009.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:49.711Z,1510162009.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:49.772Z,1510162009.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:50.110Z,1510162010.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:50.125Z,1510162010.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:50.521Z,1510162010.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:50.554Z,1510162010.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:50.918Z,1510162010.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:50.951Z,1510162010.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:51.321Z,1510162011.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:51.352Z,1510162011.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:51.709Z,1510162011.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:51.725Z,1510162011.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:52.108Z,1510162012.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:52.125Z,1510162012.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:52.510Z,1510162012.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:52.527Z,1510162012.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:52.910Z,1510162012.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:52.926Z,1510162012.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:53.318Z,1510162013.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:53.334Z,1510162013.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:53.720Z,1510162013.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:53.736Z,1510162013.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:54.121Z,1510162014.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:54.163Z,1510162014.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:54.510Z,1510162014.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:54.527Z,1510162014.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:54.909Z,1510162014.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:54.925Z,1510162014.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:55.310Z,1510162015.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:55.326Z,1510162015.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:55.709Z,1510162015.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:55.726Z,1510162015.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:56.103Z,1510162016.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:56.131Z,1510162016.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:56.522Z,1510162016.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:56.563Z,1510162016.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:56.922Z,1510162016.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:56.938Z,1510162016.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:57.317Z,1510162017.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:57.333Z,1510162017.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:57.706Z,1510162017.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:57.735Z,1510162017.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:58.109Z,1510162018.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:58.125Z,1510162018.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:58.513Z,1510162018.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:58.529Z,1510162018.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:58.914Z,1510162018.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:58.930Z,1510162018.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:59.322Z,1510162019.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:59.339Z,1510162019.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:26:59.720Z,1510162019.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:26:59.736Z,1510162019.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:00.122Z,1510162020.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:00.138Z,1510162020.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:00.512Z,1510162020.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:00.535Z,1510162020.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:00.912Z,1510162020.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:00.928Z,1510162020.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:01.313Z,1510162021.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:01.330Z,1510162021.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:01.710Z,1510162021.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:01.771Z,1510162021.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:02.113Z,1510162022.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:02.173Z,1510162022.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:02.523Z,1510162022.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:02.540Z,1510162022.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:02.922Z,1510162022.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:02.976Z,1510162022.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:03.322Z,1510162023.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:03.338Z,1510162023.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:03.714Z,1510162023.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:03.769Z,1510162023.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:04.113Z,1510162024.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:04.136Z,1510162024.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:04.513Z,1510162024.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:04.529Z,1510162024.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:04.903Z,1510162024.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:04.935Z,1510162024.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:05.324Z,1510162025.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:05.340Z,1510162025.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:05.727Z,1510162025.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:05.743Z,1510162025.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:06.128Z,1510162026.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:06.151Z,1510162026.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:06.503Z,1510162026.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:06.535Z,1510162026.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:06.907Z,1510162026.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:06.931Z,1510162026.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:07.307Z,1510162027.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:07.333Z,1510162027.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:07.704Z,1510162027.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:07.729Z,1510162027.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:08.107Z,1510162028.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:08.131Z,1510162028.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:08.528Z,1510162028.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:08.544Z,1510162028.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:08.923Z,1510162028.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:08.939Z,1510162028.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:09.319Z,1510162029.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:09.339Z,1510162029.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:09.707Z,1510162029.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:09.734Z,1510162029.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:10.107Z,1510162030.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:10.133Z,1510162030.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:10.508Z,1510162030.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:10.533Z,1510162030.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:10.908Z,1510162030.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:10.934Z,1510162030.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:11.324Z,1510162031.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:11.340Z,1510162031.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:11.728Z,1510162031.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:11.744Z,1510162031.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:12.122Z,1510162032.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:12.175Z,1510162032.175 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:12.175Z,1510162032.175 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81
2017-11-08T17:27:12.175Z,1510162032.175 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T17:27:12.177Z,1510162032.177 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:12.178Z,1510162032.178 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81
2017-11-08T17:27:12.178Z,1510162032.178 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T17:27:12.179Z,1510162032.179 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:12.179Z,1510162032.179 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 81
2017-11-08T17:27:12.179Z,1510162032.179 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T17:27:12.261Z,1510162032.261 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T17:27:12.261Z,1510162032.261 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T17:27:12.261Z,1510162032.261 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T17:27:12.515Z,1510162032.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:12.622Z,1510162032.622 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T17:27:12.622Z,1510162032.622 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81
2017-11-08T17:27:12.622Z,1510162032.622 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T17:27:12.622Z,1510162032.622 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81
2017-11-08T17:27:12.623Z,1510162032.623 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T17:27:12.623Z,1510162032.623 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 81
2017-11-08T17:27:12.904Z,1510162032.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:12.937Z,1510162032.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T17:27:12.937Z,1510162032.937 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:27:12.938Z,1510162032.938 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:27:12.938Z,1510162032.938 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T17:27:12.938Z,1510162032.938 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:27:12.939Z,1510162032.939 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:27:12.939Z,1510162032.939 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T17:27:12.940Z,1510162032.940 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:27:12.940Z,1510162032.940 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:27:13.304Z,1510162033.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:13.331Z,1510162033.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T17:27:13.332Z,1510162033.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:13.709Z,1510162033.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:13.745Z,1510162033.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T17:27:13.746Z,1510162033.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:14.103Z,1510162034.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:14.123Z,1510162034.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2017-11-08T17:27:14.124Z,1510162034.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:14.522Z,1510162034.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:14.548Z,1510162034.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T17:27:14.549Z,1510162034.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:14.922Z,1510162034.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:14.947Z,1510162034.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T17:27:14.948Z,1510162034.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:15.318Z,1510162035.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:15.350Z,1510162035.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T17:27:15.350Z,1510162035.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:15.707Z,1510162035.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:15.723Z,1510162035.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2017-11-08T17:27:15.724Z,1510162035.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:16.111Z,1510162036.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:16.132Z,1510162036.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T17:27:16.149Z,1510162036.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:16.510Z,1510162036.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:16.526Z,1510162036.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T17:27:16.527Z,1510162036.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:16.911Z,1510162036.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:16.926Z,1510162036.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T17:27:16.927Z,1510162036.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:17.322Z,1510162037.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:17.354Z,1510162037.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T17:27:17.354Z,1510162037.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:17.721Z,1510162037.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:17.736Z,1510162037.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T17:27:17.737Z,1510162037.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:18.117Z,1510162038.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:18.133Z,1510162038.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T17:27:18.134Z,1510162038.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:18.512Z,1510162038.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:18.532Z,1510162038.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T17:27:18.533Z,1510162038.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:18.913Z,1510162038.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:18.935Z,1510162038.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T17:27:18.936Z,1510162038.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:19.314Z,1510162039.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:19.330Z,1510162039.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T17:27:19.331Z,1510162039.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:19.711Z,1510162039.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:19.739Z,1510162039.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T17:27:19.740Z,1510162039.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:20.111Z,1510162040.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:20.136Z,1510162040.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T17:27:20.137Z,1510162040.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:20.524Z,1510162040.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:20.539Z,1510162040.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T17:27:20.540Z,1510162040.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:20.922Z,1510162040.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:20.943Z,1510162040.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T17:27:20.944Z,1510162040.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:21.323Z,1510162041.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:21.339Z,1510162041.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T17:27:21.340Z,1510162041.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:21.714Z,1510162041.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:21.730Z,1510162041.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T17:27:21.731Z,1510162041.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:22.111Z,1510162042.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:22.142Z,1510162042.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T17:27:22.142Z,1510162042.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:22.506Z,1510162042.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:22.540Z,1510162042.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T17:27:22.541Z,1510162042.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:22.914Z,1510162042.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:22.929Z,1510162042.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T17:27:22.930Z,1510162042.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:23.323Z,1510162043.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:23.339Z,1510162043.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T17:27:23.340Z,1510162043.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:23.724Z,1510162043.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:23.740Z,1510162043.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T17:27:23.741Z,1510162043.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:24.123Z,1510162044.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:24.176Z,1510162044.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T17:27:24.181Z,1510162044.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:24.514Z,1510162044.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:24.555Z,1510162044.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T17:27:24.556Z,1510162044.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:24.908Z,1510162044.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:24.939Z,1510162044.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T17:27:24.940Z,1510162044.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:25.304Z,1510162045.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:25.338Z,1510162045.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T17:27:25.338Z,1510162045.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:25.708Z,1510162045.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:25.763Z,1510162045.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T17:27:25.764Z,1510162045.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:26.107Z,1510162046.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:26.139Z,1510162046.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T17:27:26.140Z,1510162046.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:26.525Z,1510162046.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:26.564Z,1510162046.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T17:27:26.577Z,1510162046.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:26.928Z,1510162046.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:26.944Z,1510162046.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T17:27:26.945Z,1510162046.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:27.324Z,1510162047.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:27.341Z,1510162047.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T17:27:27.342Z,1510162047.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:27.707Z,1510162047.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:27.739Z,1510162047.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T17:27:27.740Z,1510162047.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:28.107Z,1510162048.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:28.138Z,1510162048.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T17:27:28.139Z,1510162048.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:28.508Z,1510162048.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:28.544Z,1510162048.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T17:27:28.545Z,1510162048.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:28.903Z,1510162048.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:28.930Z,1510162048.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T17:27:28.931Z,1510162048.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:29.331Z,1510162049.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:29.348Z,1510162049.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T17:27:29.349Z,1510162049.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:29.731Z,1510162049.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:29.752Z,1510162049.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T17:27:29.753Z,1510162049.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:32.802Z,1510162052.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:32.818Z,1510162052.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:32.959Z,1510162052.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:32.996Z,1510162052.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:33.355Z,1510162053.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:33.376Z,1510162053.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:33.760Z,1510162053.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:33.776Z,1510162053.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:34.155Z,1510162054.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:34.176Z,1510162054.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:34.566Z,1510162054.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:34.619Z,1510162054.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:34.965Z,1510162054.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:35.004Z,1510162055.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:35.366Z,1510162055.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:35.400Z,1510162055.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:35.754Z,1510162055.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:35.771Z,1510162055.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:36.154Z,1510162056.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:36.176Z,1510162056.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:36.555Z,1510162056.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:36.576Z,1510162056.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:36.954Z,1510162056.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:36.971Z,1510162056.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:37.365Z,1510162057.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:37.382Z,1510162057.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:37.766Z,1510162057.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:37.784Z,1510162057.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:38.162Z,1510162058.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:38.179Z,1510162058.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:38.553Z,1510162058.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:38.570Z,1510162058.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:38.956Z,1510162058.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:38.973Z,1510162058.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:39.356Z,1510162059.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:39.372Z,1510162059.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:39.758Z,1510162059.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:39.774Z,1510162059.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:40.156Z,1510162060.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:40.173Z,1510162060.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:40.561Z,1510162060.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:40.578Z,1510162060.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:40.961Z,1510162060.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:40.978Z,1510162060.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:41.366Z,1510162061.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:41.384Z,1510162061.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:41.756Z,1510162061.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:41.776Z,1510162061.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:42.153Z,1510162062.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:42.170Z,1510162062.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:42.557Z,1510162062.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:42.574Z,1510162062.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:42.956Z,1510162062.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:42.973Z,1510162062.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:43.365Z,1510162063.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:43.384Z,1510162063.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:43.766Z,1510162063.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:43.784Z,1510162063.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:44.162Z,1510162064.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:44.178Z,1510162064.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:44.557Z,1510162064.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:44.574Z,1510162064.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:44.957Z,1510162064.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:44.974Z,1510162064.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:45.355Z,1510162065.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:45.376Z,1510162065.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:45.755Z,1510162065.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:45.763Z,1510162065.763 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T17:27:45.763Z,1510162065.763 [BPC1] Data Fault, FailCount= 1
2017-11-08T17:27:45.763Z,1510162065.763 [BPC1](ERROR): Data Fault
2017-11-08T17:27:45.776Z,1510162065.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:45.857Z,1510162065.857 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T17:27:46.158Z,1510162066.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:46.175Z,1510162066.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:46.562Z,1510162066.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:46.584Z,1510162066.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:46.962Z,1510162066.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:46.979Z,1510162066.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:47.053Z,1510162067.053 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T17:27:47.053Z,1510162067.053 [BPC1] No Fault, FailCount= 1
2017-11-08T17:27:47.366Z,1510162067.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:47.452Z,1510162067.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:47.756Z,1510162067.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:47.773Z,1510162067.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:48.158Z,1510162068.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:48.174Z,1510162068.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:48.558Z,1510162068.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:48.574Z,1510162068.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:48.951Z,1510162068.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:48.972Z,1510162068.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:49.364Z,1510162069.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:49.381Z,1510162069.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:49.766Z,1510162069.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:49.784Z,1510162069.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:50.162Z,1510162070.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:50.184Z,1510162070.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:50.558Z,1510162070.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:50.574Z,1510162070.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:50.951Z,1510162070.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:50.973Z,1510162070.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:51.357Z,1510162071.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:51.373Z,1510162071.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:51.758Z,1510162071.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:51.775Z,1510162071.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:52.157Z,1510162072.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:52.174Z,1510162072.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:52.566Z,1510162072.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:52.583Z,1510162072.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:52.965Z,1510162072.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:52.982Z,1510162072.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:53.366Z,1510162073.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:53.384Z,1510162073.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:53.751Z,1510162073.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:53.782Z,1510162073.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:54.159Z,1510162074.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:54.175Z,1510162074.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:54.558Z,1510162074.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:54.575Z,1510162074.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:54.957Z,1510162074.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:54.973Z,1510162074.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:55.364Z,1510162075.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:55.383Z,1510162075.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:55.762Z,1510162075.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:55.819Z,1510162075.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:56.166Z,1510162076.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:56.184Z,1510162076.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:56.556Z,1510162076.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:56.573Z,1510162076.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:56.951Z,1510162076.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:56.974Z,1510162076.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:57.356Z,1510162077.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:57.386Z,1510162077.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:57.755Z,1510162077.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:57.776Z,1510162077.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:58.151Z,1510162078.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:58.188Z,1510162078.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:58.566Z,1510162078.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:58.584Z,1510162078.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:58.964Z,1510162078.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:58.980Z,1510162078.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:59.368Z,1510162079.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:59.391Z,1510162079.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:27:59.755Z,1510162079.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:27:59.778Z,1510162079.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:00.154Z,1510162080.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:00.170Z,1510162080.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:00.559Z,1510162080.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:00.576Z,1510162080.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:00.956Z,1510162080.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:00.986Z,1510162080.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:01.367Z,1510162081.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:01.384Z,1510162081.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:01.766Z,1510162081.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:01.784Z,1510162081.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:02.166Z,1510162082.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:02.184Z,1510162082.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:02.558Z,1510162082.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:02.574Z,1510162082.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:02.957Z,1510162082.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:02.975Z,1510162082.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:03.355Z,1510162083.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:03.376Z,1510162083.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:03.754Z,1510162083.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:03.774Z,1510162083.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:04.151Z,1510162084.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:04.173Z,1510162084.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:04.570Z,1510162084.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:04.603Z,1510162084.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:04.965Z,1510162084.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:04.982Z,1510162084.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:05.362Z,1510162085.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:05.379Z,1510162085.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:05.756Z,1510162085.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:05.773Z,1510162085.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:06.155Z,1510162086.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:06.176Z,1510162086.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:06.553Z,1510162086.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:06.574Z,1510162086.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:06.957Z,1510162086.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:06.973Z,1510162086.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:07.361Z,1510162087.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:07.383Z,1510162087.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:07.765Z,1510162087.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:07.847Z,1510162087.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:08.167Z,1510162088.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:08.191Z,1510162088.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:08.559Z,1510162088.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:08.609Z,1510162088.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:08.958Z,1510162088.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:08.976Z,1510162088.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:09.356Z,1510162089.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:09.415Z,1510162089.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:09.760Z,1510162089.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:09.776Z,1510162089.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:10.151Z,1510162090.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:10.174Z,1510162090.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:10.567Z,1510162090.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:10.584Z,1510162090.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:10.967Z,1510162090.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:10.984Z,1510162090.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:11.366Z,1510162091.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:11.384Z,1510162091.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:11.751Z,1510162091.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:11.773Z,1510162091.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:12.154Z,1510162092.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:12.170Z,1510162092.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:12.550Z,1510162092.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:12.576Z,1510162092.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:12.955Z,1510162092.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:12.976Z,1510162092.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:13.367Z,1510162093.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:13.383Z,1510162093.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:13.766Z,1510162093.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:13.784Z,1510162093.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:14.166Z,1510162094.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:14.184Z,1510162094.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:14.554Z,1510162094.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:14.570Z,1510162094.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:14.950Z,1510162094.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:14.981Z,1510162094.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:15.357Z,1510162095.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:15.374Z,1510162095.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:15.754Z,1510162095.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:15.776Z,1510162095.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:16.151Z,1510162096.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:16.173Z,1510162096.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:16.566Z,1510162096.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:16.584Z,1510162096.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:16.966Z,1510162096.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:16.983Z,1510162096.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:17.366Z,1510162097.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:17.384Z,1510162097.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:17.756Z,1510162097.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:17.814Z,1510162097.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:18.158Z,1510162098.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:18.174Z,1510162098.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:18.551Z,1510162098.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:18.574Z,1510162098.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:18.955Z,1510162098.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:18.976Z,1510162098.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:19.367Z,1510162099.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:19.384Z,1510162099.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:19.766Z,1510162099.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:19.784Z,1510162099.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:20.166Z,1510162100.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:20.184Z,1510162100.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:20.553Z,1510162100.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:20.570Z,1510162100.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:20.950Z,1510162100.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:20.981Z,1510162100.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:21.357Z,1510162101.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:21.374Z,1510162101.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:21.755Z,1510162101.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:21.772Z,1510162101.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:22.150Z,1510162102.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:22.181Z,1510162102.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:22.566Z,1510162102.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:22.584Z,1510162102.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:22.966Z,1510162102.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:22.983Z,1510162102.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:23.366Z,1510162103.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:23.384Z,1510162103.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:23.755Z,1510162103.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:23.776Z,1510162103.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:24.154Z,1510162104.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:24.176Z,1510162104.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:24.551Z,1510162104.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:24.574Z,1510162104.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:24.955Z,1510162104.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:24.979Z,1510162104.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:25.367Z,1510162105.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:25.384Z,1510162105.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:25.766Z,1510162105.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:25.784Z,1510162105.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:26.166Z,1510162106.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:26.184Z,1510162106.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:26.554Z,1510162106.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:26.576Z,1510162106.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:26.951Z,1510162106.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:26.973Z,1510162106.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:27.355Z,1510162107.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:27.376Z,1510162107.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:27.751Z,1510162107.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:27.774Z,1510162107.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:28.151Z,1510162108.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:28.173Z,1510162108.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:28.566Z,1510162108.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:28.584Z,1510162108.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:28.966Z,1510162108.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:28.983Z,1510162108.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:29.366Z,1510162109.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:29.420Z,1510162109.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:29.761Z,1510162109.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:29.835Z,1510162109.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:32.836Z,1510162112.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:32.865Z,1510162112.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:32.984Z,1510162112.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:33.026Z,1510162113.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:33.394Z,1510162113.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:33.463Z,1510162113.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:33.797Z,1510162113.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:33.823Z,1510162113.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:34.190Z,1510162114.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:34.229Z,1510162114.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:34.580Z,1510162114.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:34.620Z,1510162114.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:34.983Z,1510162114.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:34.999Z,1510162114.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:35.384Z,1510162115.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:35.400Z,1510162115.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:35.785Z,1510162115.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:35.801Z,1510162115.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:36.183Z,1510162116.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:36.198Z,1510162116.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:36.598Z,1510162116.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:36.622Z,1510162116.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:36.997Z,1510162116.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:37.023Z,1510162117.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:37.397Z,1510162117.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:37.423Z,1510162117.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:37.785Z,1510162117.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:37.801Z,1510162117.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:38.183Z,1510162118.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:38.199Z,1510162118.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:38.580Z,1510162118.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:38.596Z,1510162118.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:38.979Z,1510162118.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:38.995Z,1510162118.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:39.394Z,1510162119.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:39.426Z,1510162119.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:39.794Z,1510162119.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:39.825Z,1510162119.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:40.191Z,1510162120.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:40.225Z,1510162120.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:40.583Z,1510162120.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:40.599Z,1510162120.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:40.983Z,1510162120.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:40.999Z,1510162120.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:41.380Z,1510162121.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:41.396Z,1510162121.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:41.783Z,1510162121.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:41.799Z,1510162121.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:42.178Z,1510162122.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:42.194Z,1510162122.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:42.594Z,1510162122.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:42.637Z,1510162122.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:42.993Z,1510162122.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:43.026Z,1510162123.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:43.394Z,1510162123.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:43.427Z,1510162123.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:43.783Z,1510162123.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:43.800Z,1510162123.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:44.182Z,1510162124.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:44.199Z,1510162124.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:44.579Z,1510162124.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:44.595Z,1510162124.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:44.979Z,1510162124.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:44.996Z,1510162124.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:45.393Z,1510162125.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:45.425Z,1510162125.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:45.793Z,1510162125.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:45.825Z,1510162125.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:46.190Z,1510162126.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:46.222Z,1510162126.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:46.583Z,1510162126.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:46.598Z,1510162126.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:46.979Z,1510162126.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:46.995Z,1510162126.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:47.379Z,1510162127.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:47.396Z,1510162127.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:47.783Z,1510162127.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:47.799Z,1510162127.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:48.183Z,1510162128.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:48.198Z,1510162128.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:48.590Z,1510162128.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:48.606Z,1510162128.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:48.993Z,1510162128.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:49.009Z,1510162129.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:49.393Z,1510162129.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:49.435Z,1510162129.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:49.787Z,1510162129.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:49.808Z,1510162129.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:50.183Z,1510162130.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:50.199Z,1510162130.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:50.585Z,1510162130.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:50.600Z,1510162130.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:50.981Z,1510162130.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:50.998Z,1510162130.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:51.394Z,1510162131.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:51.410Z,1510162131.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:51.794Z,1510162131.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:51.810Z,1510162131.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:52.191Z,1510162132.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:52.212Z,1510162132.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:52.585Z,1510162132.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:52.601Z,1510162132.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:52.983Z,1510162132.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:52.000Z,1510162133.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:53.380Z,1510162133.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:53.405Z,1510162133.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:53.783Z,1510162133.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:53.804Z,1510162133.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:54.186Z,1510162134.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:54.203Z,1510162134.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:54.590Z,1510162134.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:54.664Z,1510162134.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:54.993Z,1510162134.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:55.009Z,1510162135.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:55.393Z,1510162135.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:55.443Z,1510162135.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:55.782Z,1510162135.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:55.798Z,1510162135.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:56.186Z,1510162136.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:56.239Z,1510162136.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:56.587Z,1510162136.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:56.602Z,1510162136.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:56.979Z,1510162136.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:57.001Z,1510162137.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:57.391Z,1510162137.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:57.411Z,1510162137.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:57.793Z,1510162137.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:57.809Z,1510162137.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:58.191Z,1510162138.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:58.211Z,1510162138.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:58.586Z,1510162138.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:58.602Z,1510162138.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:58.987Z,1510162138.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:59.002Z,1510162139.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:59.382Z,1510162139.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:59.399Z,1510162139.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:28:59.786Z,1510162139.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:28:59.802Z,1510162139.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:00.187Z,1510162140.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:00.203Z,1510162140.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:00.591Z,1510162140.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:00.612Z,1510162140.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:00.993Z,1510162140.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:01.009Z,1510162141.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:01.394Z,1510162141.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:01.415Z,1510162141.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:01.782Z,1510162141.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:01.798Z,1510162141.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:02.186Z,1510162142.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:02.201Z,1510162142.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:02.588Z,1510162142.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:02.604Z,1510162142.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:02.979Z,1510162142.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:03.001Z,1510162143.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:03.391Z,1510162143.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:03.411Z,1510162143.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:03.794Z,1510162143.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:03.810Z,1510162143.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:04.191Z,1510162144.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:04.215Z,1510162144.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:04.586Z,1510162144.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:04.637Z,1510162144.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:04.987Z,1510162144.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:05.004Z,1510162145.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:05.379Z,1510162145.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:05.401Z,1510162145.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:05.786Z,1510162145.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:05.802Z,1510162145.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:06.178Z,1510162146.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:06.202Z,1510162146.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:06.594Z,1510162146.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:06.611Z,1510162146.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:06.994Z,1510162146.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:07.015Z,1510162147.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:07.395Z,1510162147.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:07.415Z,1510162147.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:07.782Z,1510162147.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:07.802Z,1510162147.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:08.182Z,1510162148.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:08.203Z,1510162148.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:08.588Z,1510162148.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:08.604Z,1510162148.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:08.979Z,1510162148.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:09.001Z,1510162149.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:09.395Z,1510162149.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:09.411Z,1510162149.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:09.795Z,1510162149.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:09.815Z,1510162149.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:10.195Z,1510162150.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:10.211Z,1510162150.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:10.586Z,1510162150.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:10.602Z,1510162150.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:10.987Z,1510162150.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:11.004Z,1510162151.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:11.379Z,1510162151.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:11.401Z,1510162151.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:11.782Z,1510162151.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:11.803Z,1510162151.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:12.187Z,1510162152.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:12.204Z,1510162152.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:12.594Z,1510162152.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:12.611Z,1510162152.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:12.993Z,1510162152.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:13.009Z,1510162153.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:13.395Z,1510162153.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:13.412Z,1510162153.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:13.782Z,1510162153.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:13.803Z,1510162153.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:14.183Z,1510162154.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:14.205Z,1510162154.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:14.587Z,1510162154.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:14.607Z,1510162154.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:14.983Z,1510162154.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:15.006Z,1510162155.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:15.396Z,1510162155.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:15.412Z,1510162155.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:15.796Z,1510162155.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:15.819Z,1510162155.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:16.194Z,1510162156.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:16.211Z,1510162156.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:16.587Z,1510162156.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:16.607Z,1510162156.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:16.991Z,1510162156.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:17.078Z,1510162157.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:17.387Z,1510162157.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:17.407Z,1510162157.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:17.785Z,1510162157.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:17.839Z,1510162157.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:18.189Z,1510162158.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:18.205Z,1510162158.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:18.598Z,1510162158.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:18.654Z,1510162158.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:19.000Z,1510162159.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:19.023Z,1510162159.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:19.401Z,1510162159.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:19.417Z,1510162159.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:19.783Z,1510162159.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:19.808Z,1510162159.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:20.191Z,1510162160.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:20.206Z,1510162160.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:20.577Z,1510162160.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:20.605Z,1510162160.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:20.989Z,1510162160.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:21.006Z,1510162161.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:21.396Z,1510162161.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:21.413Z,1510162161.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:21.801Z,1510162161.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:21.818Z,1510162161.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:22.200Z,1510162162.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:22.223Z,1510162162.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:22.580Z,1510162162.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:22.611Z,1510162162.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:22.976Z,1510162162.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:23.007Z,1510162163.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:23.380Z,1510162163.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:23.416Z,1510162163.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:23.780Z,1510162163.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:23.806Z,1510162163.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:24.176Z,1510162164.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:24.212Z,1510162164.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:24.601Z,1510162164.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:24.617Z,1510162164.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:24.998Z,1510162164.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:25.019Z,1510162165.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:25.401Z,1510162165.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:25.417Z,1510162165.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:25.780Z,1510162165.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:25.816Z,1510162165.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:26.179Z,1510162166.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:26.210Z,1510162166.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:26.576Z,1510162166.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:26.612Z,1510162166.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:26.980Z,1510162166.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:27.028Z,1510162167.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:27.396Z,1510162167.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:27.419Z,1510162167.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:27.797Z,1510162167.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:27.813Z,1510162167.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:28.201Z,1510162168.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:28.222Z,1510162168.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:28.580Z,1510162168.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:28.612Z,1510162168.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:28.980Z,1510162168.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:29.011Z,1510162169.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:29.383Z,1510162169.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:29.410Z,1510162169.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:29.413Z,1510162169.413 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T17:29:29.413Z,1510162169.413 [Default:CheckIn:C.Wait] Stopped
2017-11-08T17:29:29.413Z,1510162169.413 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T17:29:29.413Z,1510162169.413 [Default:CheckIn:D] Running Loop=1
2017-11-08T17:29:29.785Z,1510162169.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:29.819Z,1510162169.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:29.822Z,1510162169.822 [Default:CheckIn:D] Stopped
2017-11-08T17:29:29.823Z,1510162169.823 [Default:CheckIn:E] Running Loop=1
2017-11-08T17:29:32.866Z,1510162172.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:32.882Z,1510162172.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:32.886Z,1510162172.886 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 242.814046 min 
2017-11-08T17:29:32.886Z,1510162172.886 [Default:CheckIn:E] Stopped
2017-11-08T17:29:32.886Z,1510162172.886 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T17:29:32.886Z,1510162172.886 [Default:CheckIn] Stopped
2017-11-08T17:29:32.886Z,1510162172.886 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T17:29:32.887Z,1510162172.887 [Default:CheckIn](INFO): Running loop #12
2017-11-08T17:29:32.887Z,1510162172.887 [Default:CheckIn] Running Loop=12
2017-11-08T17:29:32.887Z,1510162172.887 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T17:29:32.887Z,1510162172.887 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T17:29:33.049Z,1510162173.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:33.083Z,1510162173.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:33.422Z,1510162173.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:33.438Z,1510162173.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:33.825Z,1510162173.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:33.865Z,1510162173.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:34.219Z,1510162174.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:34.235Z,1510162174.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:34.615Z,1510162174.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:34.631Z,1510162174.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:35.010Z,1510162175.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:35.027Z,1510162175.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:35.423Z,1510162175.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:35.439Z,1510162175.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:35.821Z,1510162175.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:35.843Z,1510162175.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:36.219Z,1510162176.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:36.236Z,1510162176.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:36.615Z,1510162176.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:36.631Z,1510162176.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:37.011Z,1510162177.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:37.032Z,1510162177.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:37.414Z,1510162177.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:37.430Z,1510162177.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:37.815Z,1510162177.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:37.836Z,1510162177.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:38.214Z,1510162178.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:38.235Z,1510162178.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:38.620Z,1510162178.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:38.679Z,1510162178.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:39.028Z,1510162179.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:39.095Z,1510162179.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:39.418Z,1510162179.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:39.447Z,1510162179.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:39.807Z,1510162179.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:39.856Z,1510162179.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:40.208Z,1510162180.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:40.233Z,1510162180.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:40.608Z,1510162180.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:40.669Z,1510162180.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:41.007Z,1510162181.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:41.033Z,1510162181.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:41.427Z,1510162181.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:41.444Z,1510162181.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:41.827Z,1510162181.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:41.844Z,1510162181.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:42.224Z,1510162182.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:42.240Z,1510162182.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:42.607Z,1510162182.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:42.642Z,1510162182.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:43.007Z,1510162183.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:43.039Z,1510162183.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:43.407Z,1510162183.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:43.433Z,1510162183.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:43.808Z,1510162183.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:43.842Z,1510162183.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:44.207Z,1510162184.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:44.238Z,1510162184.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:44.625Z,1510162184.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:44.640Z,1510162184.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:45.028Z,1510162185.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:45.044Z,1510162185.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:45.423Z,1510162185.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:45.439Z,1510162185.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:45.807Z,1510162185.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:45.833Z,1510162185.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:46.208Z,1510162186.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:46.233Z,1510162186.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:46.608Z,1510162186.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:46.641Z,1510162186.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:47.003Z,1510162187.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:47.028Z,1510162187.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:47.427Z,1510162187.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:47.444Z,1510162187.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:47.828Z,1510162187.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:47.844Z,1510162187.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:48.224Z,1510162188.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:48.240Z,1510162188.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:48.608Z,1510162188.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:48.640Z,1510162188.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:49.007Z,1510162189.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:49.055Z,1510162189.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:49.407Z,1510162189.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:49.438Z,1510162189.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:49.808Z,1510162189.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:49.838Z,1510162189.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:50.207Z,1510162190.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:50.238Z,1510162190.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:50.628Z,1510162190.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:50.644Z,1510162190.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:51.024Z,1510162191.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:51.040Z,1510162191.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:51.424Z,1510162191.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:51.440Z,1510162191.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:51.807Z,1510162191.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:51.838Z,1510162191.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:52.207Z,1510162192.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:52.237Z,1510162192.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:52.608Z,1510162192.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:52.638Z,1510162192.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:53.007Z,1510162193.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:53.039Z,1510162193.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:53.428Z,1510162193.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:53.444Z,1510162193.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:53.827Z,1510162193.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:53.844Z,1510162193.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:54.227Z,1510162194.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:54.243Z,1510162194.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:54.604Z,1510162194.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:54.632Z,1510162194.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:55.007Z,1510162195.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:55.042Z,1510162195.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:55.407Z,1510162195.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:55.444Z,1510162195.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:55.807Z,1510162195.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:55.842Z,1510162195.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:56.207Z,1510162196.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:56.242Z,1510162196.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:56.630Z,1510162196.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:56.646Z,1510162196.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:57.032Z,1510162197.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:57.048Z,1510162197.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:57.428Z,1510162197.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:57.444Z,1510162197.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:57.808Z,1510162197.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:57.844Z,1510162197.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:58.208Z,1510162198.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:58.242Z,1510162198.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:58.609Z,1510162198.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:58.645Z,1510162198.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:59.003Z,1510162199.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:59.047Z,1510162199.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:59.422Z,1510162199.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:59.448Z,1510162199.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:29:59.822Z,1510162199.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:29:59.848Z,1510162199.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:00.222Z,1510162200.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:00.248Z,1510162200.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:00.607Z,1510162200.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:00.625Z,1510162200.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:01.007Z,1510162201.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:01.076Z,1510162201.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:01.411Z,1510162201.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:01.427Z,1510162201.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:01.808Z,1510162201.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:01.863Z,1510162201.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:02.212Z,1510162202.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:02.228Z,1510162202.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:02.621Z,1510162202.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:02.671Z,1510162202.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:03.018Z,1510162203.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:03.052Z,1510162203.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:03.422Z,1510162203.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:03.452Z,1510162203.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:03.811Z,1510162203.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:03.826Z,1510162203.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:04.207Z,1510162204.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:04.223Z,1510162204.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:04.611Z,1510162204.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:04.628Z,1510162204.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:05.006Z,1510162205.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:05.023Z,1510162205.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:05.418Z,1510162205.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:05.434Z,1510162205.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:05.822Z,1510162205.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:05.838Z,1510162205.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:06.218Z,1510162206.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:06.234Z,1510162206.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:06.609Z,1510162206.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:06.625Z,1510162206.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:07.013Z,1510162207.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:07.029Z,1510162207.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:07.411Z,1510162207.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:07.431Z,1510162207.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:07.810Z,1510162207.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:07.826Z,1510162207.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:08.214Z,1510162208.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:08.230Z,1510162208.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:08.617Z,1510162208.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:08.633Z,1510162208.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:09.019Z,1510162209.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:09.039Z,1510162209.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:09.419Z,1510162209.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:09.439Z,1510162209.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:09.810Z,1510162209.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:09.837Z,1510162209.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:10.211Z,1510162210.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:10.227Z,1510162210.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:10.613Z,1510162210.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:10.638Z,1510162210.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:11.011Z,1510162211.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:11.061Z,1510162211.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:11.423Z,1510162211.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:11.440Z,1510162211.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:11.823Z,1510162211.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:11.843Z,1510162211.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:12.224Z,1510162212.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:12.247Z,1510162212.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:12.614Z,1510162212.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:12.635Z,1510162212.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:13.011Z,1510162213.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:13.033Z,1510162213.033 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:13.034Z,1510162213.034 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82
2017-11-08T17:30:13.034Z,1510162213.034 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T17:30:13.035Z,1510162213.035 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:13.036Z,1510162213.036 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82
2017-11-08T17:30:13.036Z,1510162213.036 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T17:30:13.037Z,1510162213.037 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:13.038Z,1510162213.038 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 82
2017-11-08T17:30:13.038Z,1510162213.038 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T17:30:13.113Z,1510162213.113 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T17:30:13.113Z,1510162213.113 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T17:30:13.114Z,1510162213.114 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T17:30:13.403Z,1510162213.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:13.518Z,1510162213.518 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T17:30:13.519Z,1510162213.519 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82
2017-11-08T17:30:13.519Z,1510162213.519 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T17:30:13.519Z,1510162213.519 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82
2017-11-08T17:30:13.519Z,1510162213.519 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T17:30:13.520Z,1510162213.520 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 82
2017-11-08T17:30:13.804Z,1510162213.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:13.838Z,1510162213.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T17:30:13.839Z,1510162213.839 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:30:13.839Z,1510162213.839 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:30:13.839Z,1510162213.839 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T17:30:13.840Z,1510162213.840 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:30:13.840Z,1510162213.840 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:30:13.841Z,1510162213.841 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T17:30:13.841Z,1510162213.841 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:30:13.841Z,1510162213.841 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:30:14.203Z,1510162214.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:14.219Z,1510162214.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T17:30:14.220Z,1510162214.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:14.617Z,1510162214.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:14.651Z,1510162214.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T17:30:14.652Z,1510162214.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:15.018Z,1510162215.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:15.044Z,1510162215.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T17:30:15.045Z,1510162215.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:15.418Z,1510162215.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:15.442Z,1510162215.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T17:30:15.443Z,1510162215.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:15.807Z,1510162215.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:15.823Z,1510162215.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T17:30:15.823Z,1510162215.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:16.204Z,1510162216.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:16.219Z,1510162216.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T17:30:16.221Z,1510162216.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:16.608Z,1510162216.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:16.624Z,1510162216.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T17:30:16.625Z,1510162216.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:17.007Z,1510162217.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:17.023Z,1510162217.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T17:30:17.024Z,1510162217.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:17.418Z,1510162217.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:17.450Z,1510162217.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T17:30:17.451Z,1510162217.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:17.822Z,1510162217.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:17.853Z,1510162217.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T17:30:17.854Z,1510162217.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:18.222Z,1510162218.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:18.237Z,1510162218.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T17:30:18.238Z,1510162218.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:18.613Z,1510162218.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:18.629Z,1510162218.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T17:30:18.630Z,1510162218.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:19.013Z,1510162219.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:19.029Z,1510162219.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T17:30:19.030Z,1510162219.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:19.410Z,1510162219.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:19.431Z,1510162219.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T17:30:19.432Z,1510162219.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:19.811Z,1510162219.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:19.827Z,1510162219.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T17:30:19.828Z,1510162219.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:20.215Z,1510162220.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:20.232Z,1510162220.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T17:30:20.233Z,1510162220.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:20.618Z,1510162220.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:20.634Z,1510162220.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T17:30:20.634Z,1510162220.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:21.018Z,1510162221.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:21.034Z,1510162221.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T17:30:21.034Z,1510162221.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:21.418Z,1510162221.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:21.434Z,1510162221.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T17:30:21.435Z,1510162221.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:21.810Z,1510162221.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:21.831Z,1510162221.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T17:30:21.832Z,1510162221.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:22.213Z,1510162222.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:22.229Z,1510162222.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T17:30:22.230Z,1510162222.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:22.612Z,1510162222.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:22.632Z,1510162222.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T17:30:22.637Z,1510162222.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:23.011Z,1510162223.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:23.103Z,1510162223.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T17:30:23.104Z,1510162223.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:23.423Z,1510162223.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:23.439Z,1510162223.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T17:30:23.440Z,1510162223.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:23.820Z,1510162223.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:23.844Z,1510162223.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T17:30:23.849Z,1510162223.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:24.227Z,1510162224.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:24.279Z,1510162224.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T17:30:24.280Z,1510162224.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:24.614Z,1510162224.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:24.635Z,1510162224.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T17:30:24.636Z,1510162224.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:25.011Z,1510162225.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:25.065Z,1510162225.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T17:30:25.066Z,1510162225.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:25.403Z,1510162225.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:25.434Z,1510162225.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T17:30:25.435Z,1510162225.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:25.804Z,1510162225.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:25.837Z,1510162225.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T17:30:25.838Z,1510162225.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:26.215Z,1510162226.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:26.235Z,1510162226.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T17:30:26.236Z,1510162226.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:26.625Z,1510162226.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:26.640Z,1510162226.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T17:30:26.641Z,1510162226.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:27.024Z,1510162227.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:27.039Z,1510162227.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T17:30:27.040Z,1510162227.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:27.423Z,1510162227.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:27.446Z,1510162227.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T17:30:27.447Z,1510162227.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:27.803Z,1510162227.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:27.829Z,1510162227.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T17:30:27.829Z,1510162227.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:28.214Z,1510162228.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:28.235Z,1510162228.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T17:30:28.236Z,1510162228.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:28.611Z,1510162228.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:28.633Z,1510162228.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T17:30:28.634Z,1510162228.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:29.003Z,1510162229.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:29.028Z,1510162229.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T17:30:29.029Z,1510162229.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:29.427Z,1510162229.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:29.447Z,1510162229.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T17:30:29.448Z,1510162229.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:29.827Z,1510162229.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:29.847Z,1510162229.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T17:30:29.848Z,1510162229.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:32.901Z,1510162232.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:32.926Z,1510162232.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2017-11-08T17:30:32.927Z,1510162232.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:33.037Z,1510162233.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:33.099Z,1510162233.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:33.444Z,1510162233.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:33.476Z,1510162233.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:33.839Z,1510162233.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:33.855Z,1510162233.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:34.250Z,1510162234.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:34.282Z,1510162234.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:34.654Z,1510162234.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:34.680Z,1510162234.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:35.049Z,1510162235.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:35.082Z,1510162235.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:35.440Z,1510162235.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:35.456Z,1510162235.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:35.839Z,1510162235.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:35.855Z,1510162235.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:36.249Z,1510162236.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:36.281Z,1510162236.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:36.654Z,1510162236.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:36.683Z,1510162236.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:37.054Z,1510162237.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:37.080Z,1510162237.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:37.439Z,1510162237.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:37.455Z,1510162237.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:37.840Z,1510162237.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:37.857Z,1510162237.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:38.240Z,1510162238.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:38.256Z,1510162238.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:38.653Z,1510162238.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:38.686Z,1510162238.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:39.057Z,1510162239.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:39.081Z,1510162239.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:39.450Z,1510162239.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:39.482Z,1510162239.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:39.840Z,1510162239.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:39.856Z,1510162239.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:40.245Z,1510162240.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:40.261Z,1510162240.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:40.644Z,1510162240.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:40.661Z,1510162240.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:41.043Z,1510162241.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:41.059Z,1510162241.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:41.454Z,1510162241.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:41.485Z,1510162241.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:41.858Z,1510162241.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:41.882Z,1510162241.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:42.254Z,1510162242.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:42.282Z,1510162242.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:42.643Z,1510162242.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:42.668Z,1510162242.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:43.046Z,1510162243.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:43.063Z,1510162243.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:43.440Z,1510162243.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:43.460Z,1510162243.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:43.841Z,1510162243.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:43.862Z,1510162243.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:44.246Z,1510162244.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:44.262Z,1510162244.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:44.650Z,1510162244.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:44.707Z,1510162244.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:45.056Z,1510162245.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:45.123Z,1510162245.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:45.456Z,1510162245.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:45.480Z,1510162245.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:45.846Z,1510162245.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:45.901Z,1510162245.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:46.245Z,1510162246.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:46.262Z,1510162246.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:46.645Z,1510162246.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:46.707Z,1510162246.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:47.039Z,1510162247.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:47.065Z,1510162247.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:47.456Z,1510162247.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:47.472Z,1510162247.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:47.859Z,1510162247.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:47.875Z,1510162247.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:48.256Z,1510162248.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:48.272Z,1510162248.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:48.636Z,1510162248.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:48.664Z,1510162248.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:49.039Z,1510162249.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:49.063Z,1510162249.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:49.436Z,1510162249.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:49.461Z,1510162249.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:49.839Z,1510162249.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:49.864Z,1510162249.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:50.324Z,1510162250.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:50.358Z,1510162250.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:50.660Z,1510162250.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:50.683Z,1510162250.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:51.056Z,1510162251.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:51.072Z,1510162251.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:51.440Z,1510162251.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:51.467Z,1510162251.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:51.836Z,1510162251.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:51.873Z,1510162251.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:52.256Z,1510162252.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:52.272Z,1510162252.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:52.655Z,1510162252.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:52.671Z,1510162252.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:53.060Z,1510162253.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:53.076Z,1510162253.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:53.437Z,1510162253.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:53.468Z,1510162253.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:53.835Z,1510162253.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:53.874Z,1510162253.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:54.257Z,1510162254.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:54.273Z,1510162254.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:54.656Z,1510162254.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:54.673Z,1510162254.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:55.055Z,1510162255.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:55.109Z,1510162255.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:55.440Z,1510162255.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:55.466Z,1510162255.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:55.839Z,1510162255.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:55.865Z,1510162255.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:56.263Z,1510162256.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:56.287Z,1510162256.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:56.659Z,1510162256.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:56.676Z,1510162256.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:57.055Z,1510162257.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:57.072Z,1510162257.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:57.436Z,1510162257.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:57.476Z,1510162257.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:57.839Z,1510162257.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:57.864Z,1510162257.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:58.255Z,1510162258.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:58.271Z,1510162258.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:58.655Z,1510162258.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:58.671Z,1510162258.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:59.060Z,1510162259.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:59.075Z,1510162259.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:59.436Z,1510162259.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:59.470Z,1510162259.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:30:59.839Z,1510162259.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:30:59.864Z,1510162259.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:00.260Z,1510162260.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:00.276Z,1510162260.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:00.656Z,1510162260.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:00.672Z,1510162260.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:01.052Z,1510162261.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:01.068Z,1510162261.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:01.440Z,1510162261.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:01.466Z,1510162261.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:01.839Z,1510162261.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:01.864Z,1510162261.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:02.259Z,1510162262.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:02.283Z,1510162262.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:02.659Z,1510162262.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:02.676Z,1510162262.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:03.056Z,1510162263.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:03.072Z,1510162263.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:03.439Z,1510162263.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:03.464Z,1510162263.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:03.841Z,1510162263.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:03.867Z,1510162263.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:04.239Z,1510162264.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:04.273Z,1510162264.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:04.655Z,1510162264.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:04.671Z,1510162264.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:05.058Z,1510162265.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:05.078Z,1510162265.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:05.456Z,1510162265.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:05.472Z,1510162265.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:05.839Z,1510162265.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:05.868Z,1510162265.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:06.240Z,1510162266.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:06.274Z,1510162266.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:06.636Z,1510162266.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:06.670Z,1510162266.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:07.039Z,1510162267.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:07.127Z,1510162267.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:07.454Z,1510162267.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:07.483Z,1510162267.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:07.849Z,1510162267.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:07.876Z,1510162267.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:08.249Z,1510162268.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:08.300Z,1510162268.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:08.640Z,1510162268.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:08.656Z,1510162268.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:09.035Z,1510162269.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:09.087Z,1510162269.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:09.440Z,1510162269.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:09.455Z,1510162269.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:09.840Z,1510162269.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:09.856Z,1510162269.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:10.250Z,1510162270.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:10.282Z,1510162270.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:10.653Z,1510162270.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:10.681Z,1510162270.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:11.054Z,1510162271.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:11.080Z,1510162271.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:11.440Z,1510162271.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:11.483Z,1510162271.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:11.839Z,1510162271.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:11.854Z,1510162271.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:12.254Z,1510162272.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:12.280Z,1510162272.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:12.653Z,1510162272.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:12.680Z,1510162272.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:13.045Z,1510162273.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:13.084Z,1510162273.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:13.441Z,1510162273.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:13.457Z,1510162273.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:13.839Z,1510162273.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:13.855Z,1510162273.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:14.257Z,1510162274.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:14.280Z,1510162274.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:14.653Z,1510162274.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:14.684Z,1510162274.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:15.054Z,1510162275.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:15.078Z,1510162275.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:15.444Z,1510162275.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:15.479Z,1510162275.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:15.843Z,1510162275.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:15.880Z,1510162275.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:16.258Z,1510162276.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:16.283Z,1510162276.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:16.657Z,1510162276.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:16.684Z,1510162276.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:17.058Z,1510162277.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:17.127Z,1510162277.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:17.444Z,1510162277.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:17.460Z,1510162277.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:17.839Z,1510162277.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:17.855Z,1510162277.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:18.258Z,1510162278.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:18.285Z,1510162278.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:18.659Z,1510162278.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:18.683Z,1510162278.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:19.053Z,1510162279.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:19.087Z,1510162279.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:19.445Z,1510162279.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:19.461Z,1510162279.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:19.843Z,1510162279.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:19.859Z,1510162279.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:20.254Z,1510162280.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:20.285Z,1510162280.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:20.654Z,1510162280.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:20.683Z,1510162280.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:21.058Z,1510162281.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:21.088Z,1510162281.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:21.443Z,1510162281.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:21.460Z,1510162281.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:21.842Z,1510162281.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:21.859Z,1510162281.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:22.254Z,1510162282.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:22.289Z,1510162282.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:22.653Z,1510162282.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:22.690Z,1510162282.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:23.050Z,1510162283.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:23.066Z,1510162283.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:23.443Z,1510162283.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:23.463Z,1510162283.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:23.842Z,1510162283.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:23.858Z,1510162283.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:24.254Z,1510162284.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:24.270Z,1510162284.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:24.654Z,1510162284.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:24.670Z,1510162284.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:25.050Z,1510162285.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:25.066Z,1510162285.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:25.442Z,1510162285.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:25.458Z,1510162285.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:25.843Z,1510162285.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:25.863Z,1510162285.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:26.250Z,1510162286.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:26.266Z,1510162286.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:26.649Z,1510162286.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:26.671Z,1510162286.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:27.054Z,1510162287.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:27.070Z,1510162287.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:27.444Z,1510162287.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:27.464Z,1510162287.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:27.846Z,1510162287.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:27.861Z,1510162287.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:28.254Z,1510162288.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:28.270Z,1510162288.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:28.654Z,1510162288.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:28.693Z,1510162288.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:29.053Z,1510162289.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:29.142Z,1510162289.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:29.451Z,1510162289.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:29.467Z,1510162289.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:29.850Z,1510162289.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:29.907Z,1510162289.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:32.968Z,1510162292.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:33.055Z,1510162293.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:33.205Z,1510162293.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:33.261Z,1510162293.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:33.591Z,1510162293.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:33.622Z,1510162293.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:33.977Z,1510162293.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:33.992Z,1510162293.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:34.379Z,1510162294.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:34.396Z,1510162294.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:34.780Z,1510162294.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:34.805Z,1510162294.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:35.169Z,1510162295.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:35.240Z,1510162295.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:35.592Z,1510162295.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:35.613Z,1510162295.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:35.996Z,1510162295.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:36.020Z,1510162296.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:36.389Z,1510162296.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:36.405Z,1510162296.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:36.771Z,1510162296.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:36.802Z,1510162296.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:37.171Z,1510162297.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:37.207Z,1510162297.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:37.572Z,1510162297.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:37.603Z,1510162297.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:37.971Z,1510162297.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:38.002Z,1510162298.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:38.388Z,1510162298.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:38.404Z,1510162298.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:38.789Z,1510162298.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:38.809Z,1510162298.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:39.191Z,1510162299.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:39.208Z,1510162299.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:39.571Z,1510162299.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:39.601Z,1510162299.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:39.967Z,1510162299.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:39.995Z,1510162299.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:40.371Z,1510162300.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:40.409Z,1510162300.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:40.772Z,1510162300.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:40.805Z,1510162300.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:41.167Z,1510162301.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:41.183Z,1510162301.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:41.586Z,1510162301.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:41.646Z,1510162301.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:41.985Z,1510162301.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:42.019Z,1510162302.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:42.385Z,1510162302.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:42.411Z,1510162302.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:42.771Z,1510162302.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:42.788Z,1510162302.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:43.171Z,1510162303.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:43.191Z,1510162303.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:43.571Z,1510162303.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:43.586Z,1510162303.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:43.975Z,1510162303.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:44.012Z,1510162304.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:44.386Z,1510162304.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:44.417Z,1510162304.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:44.789Z,1510162304.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:44.821Z,1510162304.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:45.186Z,1510162305.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:45.220Z,1510162305.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:45.575Z,1510162305.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:45.592Z,1510162305.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:45.974Z,1510162305.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:45.990Z,1510162305.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:46.375Z,1510162306.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:46.391Z,1510162306.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:46.771Z,1510162306.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:46.800Z,1510162306.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:47.172Z,1510162307.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:47.189Z,1510162307.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:47.587Z,1510162307.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:47.620Z,1510162307.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:47.986Z,1510162307.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:48.002Z,1510162308.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:48.381Z,1510162308.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:48.407Z,1510162308.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:48.776Z,1510162308.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:48.793Z,1510162308.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:49.176Z,1510162309.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:49.192Z,1510162309.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:49.578Z,1510162309.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:49.594Z,1510162309.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:49.978Z,1510162309.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:49.995Z,1510162309.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:50.385Z,1510162310.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:50.408Z,1510162310.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:50.785Z,1510162310.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:50.801Z,1510162310.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:51.186Z,1510162311.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:51.203Z,1510162311.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:51.577Z,1510162311.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:51.593Z,1510162311.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:51.978Z,1510162311.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:51.994Z,1510162311.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:52.377Z,1510162312.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:52.393Z,1510162312.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:52.778Z,1510162312.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:52.794Z,1510162312.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:53.178Z,1510162313.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:53.202Z,1510162313.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:53.586Z,1510162313.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:53.675Z,1510162313.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:53.986Z,1510162313.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:54.007Z,1510162314.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:54.387Z,1510162314.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:54.434Z,1510162314.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:54.778Z,1510162314.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:54.794Z,1510162314.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:55.175Z,1510162315.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:55.238Z,1510162315.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:55.574Z,1510162315.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:55.595Z,1510162315.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:55.975Z,1510162315.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:55.996Z,1510162315.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:56.386Z,1510162316.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:56.405Z,1510162316.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:56.786Z,1510162316.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:56.802Z,1510162316.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:57.189Z,1510162317.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:57.205Z,1510162317.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:57.577Z,1510162317.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:57.598Z,1510162317.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:57.977Z,1510162317.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:57.993Z,1510162317.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:58.375Z,1510162318.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:58.397Z,1510162318.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:58.768Z,1510162318.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:58.801Z,1510162318.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:59.168Z,1510162319.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:59.204Z,1510162319.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:59.594Z,1510162319.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:31:59.614Z,1510162319.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:31:59.989Z,1510162319.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:00.011Z,1510162320.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:00.398Z,1510162320.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:00.422Z,1510162320.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:00.775Z,1510162320.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:00.808Z,1510162320.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:01.202Z,1510162321.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:01.220Z,1510162321.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:01.569Z,1510162321.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:01.600Z,1510162321.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:01.975Z,1510162321.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:01.000Z,1510162322.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:02.388Z,1510162322.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:02.404Z,1510162322.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:02.792Z,1510162322.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:02.812Z,1510162322.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:03.192Z,1510162323.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:03.208Z,1510162323.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:03.573Z,1510162323.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:03.647Z,1510162323.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:03.971Z,1510162323.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:04.002Z,1510162324.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:04.374Z,1510162324.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:04.414Z,1510162324.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:04.772Z,1510162324.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:04.788Z,1510162324.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:05.175Z,1510162325.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:05.191Z,1510162325.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:05.586Z,1510162325.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:05.614Z,1510162325.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:05.985Z,1510162325.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:06.022Z,1510162326.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:06.385Z,1510162326.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:06.416Z,1510162326.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:06.778Z,1510162326.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:06.794Z,1510162326.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:07.175Z,1510162327.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:07.199Z,1510162327.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:07.579Z,1510162327.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:07.637Z,1510162327.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:07.975Z,1510162327.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:07.992Z,1510162327.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:08.390Z,1510162328.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:08.455Z,1510162328.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:08.792Z,1510162328.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:08.809Z,1510162328.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:09.187Z,1510162329.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:09.212Z,1510162329.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:09.581Z,1510162329.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:09.613Z,1510162329.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:09.987Z,1510162329.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:10.012Z,1510162330.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:10.380Z,1510162330.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:10.402Z,1510162330.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:10.782Z,1510162330.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:10.806Z,1510162330.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:11.167Z,1510162331.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:11.204Z,1510162331.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:11.594Z,1510162331.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:11.610Z,1510162331.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:11.993Z,1510162331.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:12.049Z,1510162332.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:12.398Z,1510162332.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:12.450Z,1510162332.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:12.768Z,1510162332.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:12.811Z,1510162332.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:13.171Z,1510162333.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:13.231Z,1510162333.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:13.568Z,1510162333.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:13.616Z,1510162333.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:13.968Z,1510162333.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:13.992Z,1510162333.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:14.386Z,1510162334.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:14.419Z,1510162334.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:14.786Z,1510162334.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:14.826Z,1510162334.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:15.186Z,1510162335.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:15.227Z,1510162335.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:15.575Z,1510162335.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:15.647Z,1510162335.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:15.974Z,1510162335.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:15.991Z,1510162335.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:16.377Z,1510162336.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:16.436Z,1510162336.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:16.783Z,1510162336.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:16.805Z,1510162336.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:17.174Z,1510162337.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:17.229Z,1510162337.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:17.586Z,1510162337.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:17.604Z,1510162337.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:17.990Z,1510162337.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:18.006Z,1510162338.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:18.387Z,1510162338.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:18.408Z,1510162338.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:18.774Z,1510162338.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:18.790Z,1510162338.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:19.181Z,1510162339.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:19.200Z,1510162339.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:19.587Z,1510162339.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:19.603Z,1510162339.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:19.967Z,1510162339.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:19.997Z,1510162339.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:20.393Z,1510162340.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:20.415Z,1510162340.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:20.798Z,1510162340.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:20.814Z,1510162340.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:21.182Z,1510162341.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:21.214Z,1510162341.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:21.571Z,1510162341.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:21.611Z,1510162341.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:21.970Z,1510162341.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:21.999Z,1510162341.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:22.367Z,1510162342.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:22.388Z,1510162342.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:22.780Z,1510162342.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:22.819Z,1510162342.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:23.174Z,1510162343.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:23.190Z,1510162343.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:23.588Z,1510162343.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:23.631Z,1510162343.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:24.002Z,1510162344.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:24.034Z,1510162344.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:24.390Z,1510162344.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:24.428Z,1510162344.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:24.777Z,1510162344.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:24.793Z,1510162344.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:25.175Z,1510162345.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:25.214Z,1510162345.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:25.579Z,1510162345.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:25.642Z,1510162345.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:25.971Z,1510162345.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:25.994Z,1510162345.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:26.388Z,1510162346.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:26.404Z,1510162346.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:26.792Z,1510162346.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:26.836Z,1510162346.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:27.190Z,1510162347.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:27.206Z,1510162347.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:27.582Z,1510162347.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:27.598Z,1510162347.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:27.987Z,1510162347.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:28.005Z,1510162348.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:28.378Z,1510162348.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:28.398Z,1510162348.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:28.778Z,1510162348.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:28.795Z,1510162348.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:29.183Z,1510162349.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:29.212Z,1510162349.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:29.590Z,1510162349.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:29.614Z,1510162349.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:29.995Z,1510162349.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:30.016Z,1510162350.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:33.321Z,1510162353.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:33.346Z,1510162353.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:33.464Z,1510162353.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:33.500Z,1510162353.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:33.863Z,1510162353.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:33.892Z,1510162353.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:34.279Z,1510162354.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:34.316Z,1510162354.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:34.669Z,1510162354.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:34.705Z,1510162354.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:35.067Z,1510162355.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:35.083Z,1510162355.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:35.481Z,1510162355.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:35.508Z,1510162355.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:35.878Z,1510162355.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:35.901Z,1510162355.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:36.278Z,1510162356.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:36.327Z,1510162356.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:36.671Z,1510162356.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:36.687Z,1510162356.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:37.067Z,1510162357.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:37.084Z,1510162357.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:37.468Z,1510162357.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:37.485Z,1510162357.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:37.863Z,1510162357.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:37.931Z,1510162357.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:38.274Z,1510162358.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:38.309Z,1510162358.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:38.678Z,1510162358.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:38.727Z,1510162358.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:39.074Z,1510162359.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:39.109Z,1510162359.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:39.463Z,1510162359.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:39.519Z,1510162359.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:39.867Z,1510162359.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:39.891Z,1510162359.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:40.278Z,1510162360.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:40.314Z,1510162360.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:40.677Z,1510162360.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:40.720Z,1510162360.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:41.078Z,1510162361.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:41.094Z,1510162361.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:41.470Z,1510162361.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:41.492Z,1510162361.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:41.863Z,1510162361.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:41.890Z,1510162361.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:42.274Z,1510162362.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:42.291Z,1510162362.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:42.674Z,1510162362.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:42.689Z,1510162362.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:43.074Z,1510162363.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:43.095Z,1510162363.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:43.469Z,1510162363.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:43.485Z,1510162363.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:43.866Z,1510162363.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:43.888Z,1510162363.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:44.274Z,1510162364.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:44.290Z,1510162364.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:44.677Z,1510162364.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:44.694Z,1510162364.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:45.077Z,1510162365.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:45.093Z,1510162365.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:45.469Z,1510162365.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:45.485Z,1510162365.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:45.869Z,1510162365.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:45.885Z,1510162365.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:46.273Z,1510162366.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:46.289Z,1510162366.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:46.678Z,1510162366.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:46.694Z,1510162366.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:47.074Z,1510162367.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:47.090Z,1510162367.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:47.466Z,1510162367.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:47.487Z,1510162367.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:47.862Z,1510162367.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:47.912Z,1510162367.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:48.274Z,1510162368.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:48.290Z,1510162368.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:48.673Z,1510162368.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:48.695Z,1510162368.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:49.074Z,1510162369.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:49.090Z,1510162369.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:49.468Z,1510162369.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:49.485Z,1510162369.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:49.866Z,1510162369.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:49.887Z,1510162369.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:50.274Z,1510162370.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:50.290Z,1510162370.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:50.677Z,1510162370.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:50.694Z,1510162370.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:51.077Z,1510162371.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:51.116Z,1510162371.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:51.466Z,1510162371.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:51.483Z,1510162371.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:51.869Z,1510162371.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:51.885Z,1510162371.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:52.272Z,1510162372.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:52.288Z,1510162372.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:52.674Z,1510162372.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:52.696Z,1510162372.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:53.074Z,1510162373.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:53.090Z,1510162373.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:53.466Z,1510162373.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:53.487Z,1510162373.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:53.870Z,1510162373.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:53.886Z,1510162373.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:54.271Z,1510162374.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:54.291Z,1510162374.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:54.394Z,1510162374.394 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T17:32:54.677Z,1510162374.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:54.693Z,1510162374.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:55.075Z,1510162375.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:55.091Z,1510162375.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:55.470Z,1510162375.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:55.486Z,1510162375.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:55.869Z,1510162375.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:55.885Z,1510162375.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:56.275Z,1510162376.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:56.291Z,1510162376.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:56.678Z,1510162376.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:56.695Z,1510162376.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:57.073Z,1510162377.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:57.090Z,1510162377.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:57.466Z,1510162377.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:57.482Z,1510162377.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:57.867Z,1510162377.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:57.887Z,1510162377.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:58.278Z,1510162378.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:58.295Z,1510162378.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:58.674Z,1510162378.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:58.734Z,1510162378.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:59.074Z,1510162379.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:59.090Z,1510162379.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:59.466Z,1510162379.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:59.514Z,1510162379.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:32:59.863Z,1510162379.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:32:59.884Z,1510162379.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:00.274Z,1510162380.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:00.332Z,1510162380.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:00.674Z,1510162380.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:00.690Z,1510162380.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:01.074Z,1510162381.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:01.131Z,1510162381.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:01.470Z,1510162381.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:01.486Z,1510162381.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:01.866Z,1510162381.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:01.882Z,1510162381.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:02.275Z,1510162382.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:02.296Z,1510162382.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:02.678Z,1510162382.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:02.694Z,1510162382.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:03.074Z,1510162383.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:03.090Z,1510162383.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:03.463Z,1510162383.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:03.483Z,1510162383.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:03.869Z,1510162383.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:03.885Z,1510162383.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:04.275Z,1510162384.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:04.290Z,1510162384.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:04.674Z,1510162384.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:04.696Z,1510162384.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:05.074Z,1510162385.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:05.095Z,1510162385.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:05.466Z,1510162385.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:05.487Z,1510162385.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:05.863Z,1510162385.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:05.884Z,1510162385.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:06.274Z,1510162386.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:06.295Z,1510162386.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:06.675Z,1510162386.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:06.690Z,1510162386.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:07.074Z,1510162387.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:07.095Z,1510162387.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:07.470Z,1510162387.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:07.486Z,1510162387.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:07.866Z,1510162387.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:07.887Z,1510162387.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:08.274Z,1510162388.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:08.295Z,1510162388.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:08.677Z,1510162388.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:08.694Z,1510162388.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:09.075Z,1510162389.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:09.095Z,1510162389.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:09.470Z,1510162389.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:09.527Z,1510162389.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:09.869Z,1510162389.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:09.885Z,1510162389.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:10.275Z,1510162390.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:10.295Z,1510162390.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:10.674Z,1510162390.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:10.696Z,1510162390.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:11.074Z,1510162391.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:11.091Z,1510162391.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:11.466Z,1510162391.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:11.482Z,1510162391.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:11.863Z,1510162391.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:11.884Z,1510162391.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:12.274Z,1510162392.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:12.295Z,1510162392.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:12.674Z,1510162392.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:12.690Z,1510162392.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:13.075Z,1510162393.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:13.095Z,1510162393.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:13.470Z,1510162393.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:13.486Z,1510162393.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:13.866Z,1510162393.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:13.882Z,1510162393.882 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:13.882Z,1510162393.882 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83
2017-11-08T17:33:13.882Z,1510162393.882 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T17:33:13.884Z,1510162393.884 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:13.884Z,1510162393.884 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83
2017-11-08T17:33:13.884Z,1510162393.884 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T17:33:13.886Z,1510162393.886 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:13.886Z,1510162393.886 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 83
2017-11-08T17:33:13.886Z,1510162393.886 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T17:33:13.965Z,1510162393.965 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T17:33:13.965Z,1510162393.965 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T17:33:13.965Z,1510162393.965 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T17:33:14.274Z,1510162394.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:14.377Z,1510162394.377 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T17:33:14.377Z,1510162394.377 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83
2017-11-08T17:33:14.377Z,1510162394.377 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T17:33:14.377Z,1510162394.377 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83
2017-11-08T17:33:14.378Z,1510162394.378 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T17:33:14.378Z,1510162394.378 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 83
2017-11-08T17:33:14.683Z,1510162394.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:14.703Z,1510162394.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T17:33:14.703Z,1510162394.703 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:33:14.703Z,1510162394.703 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:33:14.704Z,1510162394.704 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T17:33:14.704Z,1510162394.704 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:33:14.705Z,1510162394.705 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:33:14.705Z,1510162394.705 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T17:33:14.706Z,1510162394.706 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:33:14.706Z,1510162394.706 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:33:15.079Z,1510162395.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:15.106Z,1510162395.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T17:33:15.107Z,1510162395.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:15.460Z,1510162395.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:15.486Z,1510162395.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T17:33:15.487Z,1510162395.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:15.863Z,1510162395.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:15.894Z,1510162395.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T17:33:15.895Z,1510162395.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:16.279Z,1510162396.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:16.298Z,1510162396.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T17:33:16.299Z,1510162396.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:16.681Z,1510162396.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:16.697Z,1510162396.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T17:33:16.698Z,1510162396.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:17.080Z,1510162397.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:17.096Z,1510162397.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T17:33:17.097Z,1510162397.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:17.460Z,1510162397.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:17.499Z,1510162397.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T17:33:17.500Z,1510162397.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:17.864Z,1510162397.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:17.899Z,1510162397.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T17:33:17.900Z,1510162397.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:18.281Z,1510162398.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:18.297Z,1510162398.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T17:33:18.298Z,1510162398.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:18.681Z,1510162398.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:18.703Z,1510162398.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T17:33:18.704Z,1510162398.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:19.079Z,1510162399.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:19.107Z,1510162399.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T17:33:19.108Z,1510162399.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:19.464Z,1510162399.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:19.498Z,1510162399.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T17:33:19.499Z,1510162399.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:19.860Z,1510162399.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:19.916Z,1510162399.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T17:33:19.929Z,1510162399.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:20.278Z,1510162400.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:20.301Z,1510162400.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T17:33:20.302Z,1510162400.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:20.680Z,1510162400.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:20.700Z,1510162400.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T17:33:20.701Z,1510162400.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:21.081Z,1510162401.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:21.096Z,1510162401.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T17:33:21.097Z,1510162401.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:21.460Z,1510162401.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:21.491Z,1510162401.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T17:33:21.492Z,1510162401.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:21.863Z,1510162401.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:21.909Z,1510162401.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T17:33:21.910Z,1510162401.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:22.281Z,1510162402.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:22.296Z,1510162402.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T17:33:22.297Z,1510162402.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:22.679Z,1510162402.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:22.738Z,1510162402.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-08T17:33:22.739Z,1510162402.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:23.079Z,1510162403.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:23.095Z,1510162403.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T17:33:23.096Z,1510162403.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:23.464Z,1510162403.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:23.512Z,1510162403.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T17:33:23.513Z,1510162403.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:23.859Z,1510162403.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:23.889Z,1510162403.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T17:33:23.890Z,1510162403.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:24.279Z,1510162404.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:24.295Z,1510162404.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T17:33:24.295Z,1510162404.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:24.680Z,1510162404.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:24.695Z,1510162404.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T17:33:24.696Z,1510162404.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:25.080Z,1510162405.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:25.095Z,1510162405.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T17:33:25.096Z,1510162405.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:25.463Z,1510162405.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:25.487Z,1510162405.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T17:33:25.488Z,1510162405.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:25.859Z,1510162405.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:25.890Z,1510162405.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T17:33:25.891Z,1510162405.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:26.279Z,1510162406.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:26.295Z,1510162406.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T17:33:26.296Z,1510162406.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:26.683Z,1510162406.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:26.698Z,1510162406.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T17:33:26.699Z,1510162406.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:27.080Z,1510162407.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:27.095Z,1510162407.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T17:33:27.096Z,1510162407.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:27.460Z,1510162407.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:27.489Z,1510162407.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T17:33:27.490Z,1510162407.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:27.863Z,1510162407.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:27.887Z,1510162407.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T17:33:27.888Z,1510162407.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:28.280Z,1510162408.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:28.295Z,1510162408.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T17:33:28.296Z,1510162408.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:28.678Z,1510162408.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:28.694Z,1510162408.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T17:33:28.695Z,1510162408.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:29.076Z,1510162409.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:29.091Z,1510162409.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T17:33:29.092Z,1510162409.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:29.460Z,1510162409.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:29.490Z,1510162409.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T17:33:29.490Z,1510162409.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:29.867Z,1510162409.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:29.899Z,1510162409.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T17:33:29.900Z,1510162409.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:30.279Z,1510162410.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:30.295Z,1510162410.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T17:33:30.296Z,1510162410.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:33.357Z,1510162413.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:33.401Z,1510162413.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2017-11-08T17:33:33.402Z,1510162413.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:33.518Z,1510162413.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:33.563Z,1510162413.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-08T17:33:33.564Z,1510162413.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:33.907Z,1510162413.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:33.941Z,1510162413.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:34.307Z,1510162414.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:34.345Z,1510162414.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:34.700Z,1510162414.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:34.716Z,1510162414.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:35.099Z,1510162415.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:35.119Z,1510162415.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:35.514Z,1510162415.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:35.546Z,1510162415.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:35.914Z,1510162415.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:35.939Z,1510162415.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:36.316Z,1510162416.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:36.347Z,1510162416.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:36.700Z,1510162416.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:36.719Z,1510162416.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:37.100Z,1510162417.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:37.120Z,1510162417.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:37.505Z,1510162417.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:37.521Z,1510162417.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:37.904Z,1510162417.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:37.920Z,1510162417.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:38.319Z,1510162418.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:38.345Z,1510162418.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:38.718Z,1510162418.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:38.767Z,1510162418.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:39.118Z,1510162419.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:39.147Z,1510162419.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:39.502Z,1510162419.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:39.519Z,1510162419.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:39.903Z,1510162419.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:39.920Z,1510162419.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:40.305Z,1510162420.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:40.346Z,1510162420.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:40.703Z,1510162420.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:40.720Z,1510162420.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:41.103Z,1510162421.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:41.119Z,1510162421.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:41.518Z,1510162421.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:41.543Z,1510162421.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:41.914Z,1510162421.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:41.942Z,1510162421.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:42.317Z,1510162422.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:42.350Z,1510162422.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:42.706Z,1510162422.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:42.722Z,1510162422.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:43.102Z,1510162423.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:43.119Z,1510162423.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:43.504Z,1510162423.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:43.520Z,1510162423.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:43.906Z,1510162423.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:43.922Z,1510162423.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:44.314Z,1510162424.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:44.368Z,1510162424.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:44.717Z,1510162424.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:44.752Z,1510162424.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:45.118Z,1510162425.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:45.174Z,1510162425.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:45.506Z,1510162425.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:45.522Z,1510162425.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:45.905Z,1510162425.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:45.951Z,1510162425.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:46.306Z,1510162426.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:46.323Z,1510162426.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:46.703Z,1510162426.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:46.720Z,1510162426.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:47.105Z,1510162427.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:47.121Z,1510162427.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:47.518Z,1510162427.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:47.550Z,1510162427.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:47.914Z,1510162427.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:47.930Z,1510162427.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:48.317Z,1510162428.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:48.333Z,1510162428.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:48.709Z,1510162428.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:48.726Z,1510162428.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:49.105Z,1510162429.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:49.121Z,1510162429.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:49.505Z,1510162429.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:49.521Z,1510162429.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:49.909Z,1510162429.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:49.931Z,1510162429.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:50.314Z,1510162430.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:50.330Z,1510162430.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:50.717Z,1510162430.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:50.739Z,1510162430.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:51.118Z,1510162431.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:51.134Z,1510162431.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:51.503Z,1510162431.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:51.524Z,1510162431.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:51.905Z,1510162431.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:51.927Z,1510162431.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:52.309Z,1510162432.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:52.325Z,1510162432.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:52.707Z,1510162432.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:52.723Z,1510162432.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:53.107Z,1510162433.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:53.123Z,1510162433.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:53.518Z,1510162433.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:53.534Z,1510162433.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:53.914Z,1510162433.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:53.930Z,1510162433.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:54.313Z,1510162434.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:54.358Z,1510162434.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:54.709Z,1510162434.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:54.732Z,1510162434.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:55.105Z,1510162435.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:55.122Z,1510162435.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:55.510Z,1510162435.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:55.526Z,1510162435.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:55.910Z,1510162435.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:55.926Z,1510162435.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:56.314Z,1510162436.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:56.330Z,1510162436.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:56.717Z,1510162436.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:56.739Z,1510162436.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:57.118Z,1510162437.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:57.134Z,1510162437.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:57.508Z,1510162437.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:57.531Z,1510162437.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:57.911Z,1510162437.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:57.927Z,1510162437.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:58.305Z,1510162438.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:58.326Z,1510162438.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:58.708Z,1510162438.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:58.741Z,1510162438.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:59.111Z,1510162439.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:59.127Z,1510162439.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:59.517Z,1510162439.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:59.533Z,1510162439.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:33:59.918Z,1510162439.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:33:59.939Z,1510162439.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:00.315Z,1510162440.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:00.331Z,1510162440.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:00.711Z,1510162440.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:00.728Z,1510162440.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:01.113Z,1510162441.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:01.130Z,1510162441.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:01.509Z,1510162441.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:01.527Z,1510162441.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:01.911Z,1510162441.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:01.927Z,1510162441.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:02.318Z,1510162442.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:02.336Z,1510162442.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:02.718Z,1510162442.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:02.735Z,1510162442.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:03.118Z,1510162443.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:03.135Z,1510162443.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:03.510Z,1510162443.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:03.532Z,1510162443.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:03.909Z,1510162443.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:03.931Z,1510162443.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:04.310Z,1510162444.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:04.326Z,1510162444.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:04.710Z,1510162444.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:04.728Z,1510162444.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:05.109Z,1510162445.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:05.198Z,1510162445.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:05.515Z,1510162445.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:05.531Z,1510162445.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:05.918Z,1510162445.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:05.971Z,1510162445.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:06.314Z,1510162446.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:06.335Z,1510162446.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:06.706Z,1510162446.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:06.757Z,1510162446.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:07.109Z,1510162447.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:07.125Z,1510162447.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:07.510Z,1510162447.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:07.526Z,1510162447.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:07.910Z,1510162447.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:07.925Z,1510162447.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:08.318Z,1510162448.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:08.334Z,1510162448.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:08.717Z,1510162448.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:08.739Z,1510162448.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:09.115Z,1510162449.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:09.130Z,1510162449.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:09.509Z,1510162449.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:09.525Z,1510162449.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:09.909Z,1510162449.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:09.931Z,1510162449.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:10.304Z,1510162450.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:10.320Z,1510162450.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:10.710Z,1510162450.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:10.726Z,1510162450.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:11.108Z,1510162451.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:11.131Z,1510162451.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:11.515Z,1510162451.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:11.531Z,1510162451.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:11.918Z,1510162451.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:11.934Z,1510162451.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:12.315Z,1510162452.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:12.330Z,1510162452.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:12.706Z,1510162452.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:12.722Z,1510162452.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:13.109Z,1510162453.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:13.128Z,1510162453.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:13.510Z,1510162453.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:13.526Z,1510162453.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:13.906Z,1510162453.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:13.922Z,1510162453.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:14.318Z,1510162454.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:14.334Z,1510162454.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:14.717Z,1510162454.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:14.733Z,1510162454.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:15.115Z,1510162455.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:15.162Z,1510162455.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:15.510Z,1510162455.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:15.527Z,1510162455.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:15.907Z,1510162455.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:15.937Z,1510162455.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:16.311Z,1510162456.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:16.327Z,1510162456.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:16.711Z,1510162456.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:16.728Z,1510162456.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:17.109Z,1510162457.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:17.125Z,1510162457.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:17.515Z,1510162457.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:17.531Z,1510162457.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:17.919Z,1510162457.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:17.939Z,1510162457.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:18.319Z,1510162458.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:18.339Z,1510162458.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:18.706Z,1510162458.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:18.723Z,1510162458.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:19.103Z,1510162459.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:19.132Z,1510162459.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:19.504Z,1510162459.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:19.529Z,1510162459.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:19.903Z,1510162459.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:19.929Z,1510162459.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:20.323Z,1510162460.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:20.340Z,1510162460.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:20.723Z,1510162460.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:20.740Z,1510162460.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:21.118Z,1510162461.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:21.144Z,1510162461.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:21.503Z,1510162461.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:21.532Z,1510162461.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:21.903Z,1510162461.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:21.938Z,1510162461.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:22.303Z,1510162462.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:22.335Z,1510162462.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:22.704Z,1510162462.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:22.735Z,1510162462.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:23.103Z,1510162463.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:23.134Z,1510162463.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:23.521Z,1510162463.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:23.543Z,1510162463.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:23.924Z,1510162463.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:23.941Z,1510162463.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:24.319Z,1510162464.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:24.335Z,1510162464.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:24.703Z,1510162464.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:24.734Z,1510162464.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:25.103Z,1510162465.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:25.134Z,1510162465.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:25.503Z,1510162465.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:25.560Z,1510162465.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:25.899Z,1510162465.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:25.957Z,1510162465.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:26.323Z,1510162466.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:26.340Z,1510162466.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:26.722Z,1510162466.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:26.779Z,1510162466.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:27.123Z,1510162467.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:27.143Z,1510162467.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:27.503Z,1510162467.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:27.551Z,1510162467.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:27.903Z,1510162467.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:27.935Z,1510162467.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:28.299Z,1510162468.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:28.327Z,1510162468.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:28.704Z,1510162468.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:28.736Z,1510162468.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:29.103Z,1510162469.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:29.120Z,1510162469.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:29.513Z,1510162469.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:29.541Z,1510162469.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:29.918Z,1510162469.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:29.949Z,1510162469.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:30.318Z,1510162470.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:30.346Z,1510162470.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:33.384Z,1510162473.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:33.408Z,1510162473.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:33.411Z,1510162473.411 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T17:29:32.9Z
2017-11-08T17:34:33.411Z,1510162473.411 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T17:34:33.411Z,1510162473.411 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T17:34:33.518Z,1510162473.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:33.559Z,1510162473.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:34.210Z,1510162474.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:34.227Z,1510162474.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:34.378Z,1510162474.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:34.415Z,1510162474.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:34.774Z,1510162474.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:34.810Z,1510162474.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:35.166Z,1510162475.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:35.182Z,1510162475.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:38.242Z,1510162478.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:38.312Z,1510162478.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:38.410Z,1510162478.410 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171108T132236/Courier0048.lzma
2017-11-08T17:34:38.433Z,1510162478.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:38.467Z,1510162478.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:38.857Z,1510162478.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:38.873Z,1510162478.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:39.211Z,1510162479.211 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0048.lzma.bak
2017-11-08T17:34:39.211Z,1510162479.211 [DataOverHttps](INFO): SBD MOMSN=5223109
2017-11-08T17:34:39.268Z,1510162479.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:39.284Z,1510162479.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:40.192Z,1510162480.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:40.217Z,1510162480.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:40.332Z,1510162480.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:40.375Z,1510162480.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:43.442Z,1510162483.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:43.467Z,1510162483.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:43.581Z,1510162483.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:43.633Z,1510162483.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:44.005Z,1510162484.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:44.075Z,1510162484.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:44.403Z,1510162484.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:44.438Z,1510162484.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:44.798Z,1510162484.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:44.829Z,1510162484.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:45.188Z,1510162485.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:45.227Z,1510162485.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:48.286Z,1510162488.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:48.302Z,1510162488.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:48.427Z,1510162488.427 [DataOverHttps](INFO): Sending 219 bytes from file Logs/20171108T132236/Express0049.lzma
2017-11-08T17:34:48.455Z,1510162488.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:48.495Z,1510162488.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:48.858Z,1510162488.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:48.888Z,1510162488.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:49.221Z,1510162489.221 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0049.lzma.bak
2017-11-08T17:34:49.222Z,1510162489.222 [DataOverHttps](INFO): SBD MOMSN=5223111
2017-11-08T17:34:49.281Z,1510162489.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:49.343Z,1510162489.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:50.190Z,1510162490.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:50.206Z,1510162490.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:50.210Z,1510162490.210 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T17:34:50.210Z,1510162490.210 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T17:34:50.210Z,1510162490.210 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T17:34:50.338Z,1510162490.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:50.381Z,1510162490.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:53.426Z,1510162493.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:53.483Z,1510162493.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:53.597Z,1510162493.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:53.655Z,1510162493.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:54.022Z,1510162494.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:54.082Z,1510162494.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:54.424Z,1510162494.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:54.453Z,1510162494.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:54.810Z,1510162494.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:54.829Z,1510162494.829 [PNI_TCM](ERROR): CRC does not match. Expected:0x23976 got:0x57865
2017-11-08T17:34:54.855Z,1510162494.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:55.199Z,1510162495.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:55.236Z,1510162495.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:55.596Z,1510162495.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:55.631Z,1510162495.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:55.999Z,1510162495.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:56.045Z,1510162496.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:56.410Z,1510162496.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:56.446Z,1510162496.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:56.816Z,1510162496.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:56.847Z,1510162496.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:57.208Z,1510162497.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:57.242Z,1510162497.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:57.599Z,1510162497.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:57.643Z,1510162497.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:57.995Z,1510162497.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:58.015Z,1510162498.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:58.395Z,1510162498.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:58.439Z,1510162498.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:58.802Z,1510162498.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:58.820Z,1510162498.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:59.200Z,1510162499.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:59.248Z,1510162499.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:34:59.611Z,1510162499.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:34:59.815Z,1510162499.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:00.060Z,1510162500.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:00.076Z,1510162500.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:00.455Z,1510162500.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:00.471Z,1510162500.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:00.847Z,1510162500.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:00.867Z,1510162500.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:01.250Z,1510162501.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:01.266Z,1510162501.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:01.651Z,1510162501.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:01.667Z,1510162501.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:02.035Z,1510162502.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:02.065Z,1510162502.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:02.454Z,1510162502.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:02.508Z,1510162502.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:02.858Z,1510162502.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:02.874Z,1510162502.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:03.259Z,1510162503.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:03.280Z,1510162503.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:03.643Z,1510162503.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:03.668Z,1510162503.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:04.049Z,1510162504.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:04.065Z,1510162504.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:04.448Z,1510162504.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:04.465Z,1510162504.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:04.839Z,1510162504.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:04.874Z,1510162504.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:05.256Z,1510162505.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:05.272Z,1510162505.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:05.653Z,1510162505.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:05.681Z,1510162505.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:06.063Z,1510162506.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:06.080Z,1510162506.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:06.440Z,1510162506.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:06.474Z,1510162506.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:06.835Z,1510162506.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:06.875Z,1510162506.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:07.264Z,1510162507.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:07.280Z,1510162507.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:07.653Z,1510162507.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:07.679Z,1510162507.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:08.050Z,1510162508.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:08.075Z,1510162508.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:08.441Z,1510162508.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:08.474Z,1510162508.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:08.843Z,1510162508.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:08.859Z,1510162508.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:09.258Z,1510162509.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:09.282Z,1510162509.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:09.651Z,1510162509.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:09.683Z,1510162509.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:10.049Z,1510162510.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:10.065Z,1510162510.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:10.445Z,1510162510.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:10.462Z,1510162510.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:10.845Z,1510162510.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:10.862Z,1510162510.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:11.253Z,1510162511.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:11.291Z,1510162511.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:11.654Z,1510162511.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:11.690Z,1510162511.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:12.054Z,1510162512.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:12.072Z,1510162512.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:12.448Z,1510162512.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:12.464Z,1510162512.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:12.846Z,1510162512.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:12.863Z,1510162512.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:13.250Z,1510162513.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:13.307Z,1510162513.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:13.657Z,1510162513.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:13.680Z,1510162513.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:14.054Z,1510162514.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:14.075Z,1510162514.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:14.450Z,1510162514.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:14.521Z,1510162514.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:14.846Z,1510162514.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:14.862Z,1510162514.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:15.254Z,1510162515.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:15.275Z,1510162515.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:15.654Z,1510162515.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:15.707Z,1510162515.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:16.058Z,1510162516.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:16.074Z,1510162516.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:16.439Z,1510162516.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:16.499Z,1510162516.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:16.848Z,1510162516.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:16.864Z,1510162516.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:17.255Z,1510162517.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:17.275Z,1510162517.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:17.654Z,1510162517.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:17.670Z,1510162517.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:18.054Z,1510162518.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:18.070Z,1510162518.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:18.449Z,1510162518.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:18.469Z,1510162518.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:18.847Z,1510162518.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:18.867Z,1510162518.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:19.254Z,1510162519.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:19.271Z,1510162519.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:19.655Z,1510162519.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:19.676Z,1510162519.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:20.056Z,1510162520.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:20.072Z,1510162520.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:20.451Z,1510162520.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:20.467Z,1510162520.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:20.846Z,1510162520.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:20.862Z,1510162520.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:21.255Z,1510162521.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:21.275Z,1510162521.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:21.655Z,1510162521.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:21.675Z,1510162521.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:22.055Z,1510162522.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:22.075Z,1510162522.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:22.450Z,1510162522.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:22.466Z,1510162522.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:22.843Z,1510162522.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:22.864Z,1510162522.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:23.256Z,1510162523.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:23.273Z,1510162523.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:23.656Z,1510162523.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:23.674Z,1510162523.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:24.054Z,1510162524.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:24.071Z,1510162524.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:24.447Z,1510162524.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:24.463Z,1510162524.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:24.848Z,1510162524.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:24.903Z,1510162524.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:25.254Z,1510162525.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:25.271Z,1510162525.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:25.655Z,1510162525.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:25.676Z,1510162525.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:26.055Z,1510162526.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:26.071Z,1510162526.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:26.448Z,1510162526.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:26.469Z,1510162526.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:26.852Z,1510162526.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:26.868Z,1510162526.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:27.255Z,1510162527.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:27.275Z,1510162527.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:27.655Z,1510162527.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:27.675Z,1510162527.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:28.057Z,1510162528.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:28.073Z,1510162528.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:28.449Z,1510162528.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:28.466Z,1510162528.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:28.852Z,1510162528.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:28.868Z,1510162528.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:29.256Z,1510162529.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:29.273Z,1510162529.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:29.654Z,1510162529.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:29.678Z,1510162529.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:30.059Z,1510162530.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:30.083Z,1510162530.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:30.447Z,1510162530.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:30.463Z,1510162530.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:30.845Z,1510162530.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:30.867Z,1510162530.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:31.255Z,1510162531.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:31.284Z,1510162531.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:31.661Z,1510162531.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:31.677Z,1510162531.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:32.060Z,1510162532.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:32.083Z,1510162532.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:32.448Z,1510162532.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:32.465Z,1510162532.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:32.838Z,1510162532.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:32.864Z,1510162532.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:33.261Z,1510162533.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:33.277Z,1510162533.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:33.663Z,1510162533.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:33.681Z,1510162533.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:34.057Z,1510162534.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:34.079Z,1510162534.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:34.450Z,1510162534.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:34.467Z,1510162534.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:34.850Z,1510162534.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:34.867Z,1510162534.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:35.222Z,1510162535.222 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T17:35:35.222Z,1510162535.222 [NAL9602] Data Fault, FailCount= 4
2017-11-08T17:35:35.223Z,1510162535.223 [NAL9602](ERROR): Data Fault
2017-11-08T17:35:35.240Z,1510162535.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:35.281Z,1510162535.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:35.373Z,1510162535.373 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T17:35:35.618Z,1510162535.618 [NAL9602](INFO): Powering down
2017-11-08T17:35:35.635Z,1510162535.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:35.692Z,1510162535.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:36.037Z,1510162536.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:36.065Z,1510162536.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:36.441Z,1510162536.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:36.465Z,1510162536.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:36.553Z,1510162536.553 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T17:35:36.553Z,1510162536.553 [NAL9602] No Fault, FailCount= 4
2017-11-08T17:35:36.839Z,1510162536.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:36.864Z,1510162536.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:37.239Z,1510162537.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:37.288Z,1510162537.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:37.636Z,1510162537.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:37.664Z,1510162537.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:38.041Z,1510162538.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:38.087Z,1510162538.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:38.443Z,1510162538.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:38.473Z,1510162538.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:38.838Z,1510162538.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:38.885Z,1510162538.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:39.237Z,1510162539.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:39.261Z,1510162539.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:39.643Z,1510162539.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:39.680Z,1510162539.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:40.035Z,1510162540.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:40.051Z,1510162540.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:40.439Z,1510162540.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:40.455Z,1510162540.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:40.836Z,1510162540.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:40.879Z,1510162540.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:41.243Z,1510162541.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:41.280Z,1510162541.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:41.639Z,1510162541.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:41.655Z,1510162541.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:42.039Z,1510162542.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:42.054Z,1510162542.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:42.437Z,1510162542.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:42.452Z,1510162542.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:42.844Z,1510162542.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:42.860Z,1510162542.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:43.243Z,1510162543.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:43.258Z,1510162543.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:43.639Z,1510162543.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:43.655Z,1510162543.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:44.045Z,1510162544.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:44.077Z,1510162544.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:44.444Z,1510162544.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:44.459Z,1510162544.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:44.843Z,1510162544.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:44.858Z,1510162544.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:45.243Z,1510162545.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:45.259Z,1510162545.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:45.640Z,1510162545.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:45.682Z,1510162545.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:46.045Z,1510162546.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:46.073Z,1510162546.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:46.444Z,1510162546.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:46.460Z,1510162546.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:46.839Z,1510162546.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:46.859Z,1510162546.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:47.246Z,1510162547.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:47.293Z,1510162547.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:47.644Z,1510162547.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:47.669Z,1510162547.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:48.041Z,1510162548.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:48.058Z,1510162548.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:48.442Z,1510162548.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:48.458Z,1510162548.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:48.844Z,1510162548.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:48.861Z,1510162548.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:49.247Z,1510162549.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:49.264Z,1510162549.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:49.638Z,1510162549.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:49.654Z,1510162549.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:50.042Z,1510162550.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:50.058Z,1510162550.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:50.444Z,1510162550.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:50.459Z,1510162550.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:50.844Z,1510162550.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:50.860Z,1510162550.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:53.932Z,1510162553.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:53.948Z,1510162553.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:54.058Z,1510162554.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:54.089Z,1510162554.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:54.463Z,1510162554.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:54.491Z,1510162554.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:54.863Z,1510162554.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:54.896Z,1510162554.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:55.263Z,1510162555.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:55.294Z,1510162555.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:55.659Z,1510162555.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:55.683Z,1510162555.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:56.059Z,1510162556.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:56.084Z,1510162556.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:56.459Z,1510162556.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:56.484Z,1510162556.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:56.863Z,1510162556.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:56.891Z,1510162556.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:57.259Z,1510162557.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:57.284Z,1510162557.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:57.659Z,1510162557.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:57.684Z,1510162557.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:58.059Z,1510162558.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:58.087Z,1510162558.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:58.459Z,1510162558.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:58.507Z,1510162558.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:58.859Z,1510162558.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:58.916Z,1510162558.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:59.255Z,1510162559.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:59.292Z,1510162559.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:35:59.658Z,1510162559.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:35:59.689Z,1510162559.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:00.059Z,1510162560.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:00.108Z,1510162560.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:00.458Z,1510162560.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:00.489Z,1510162560.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:00.858Z,1510162560.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:00.903Z,1510162560.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:01.258Z,1510162561.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:01.288Z,1510162561.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:01.662Z,1510162561.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:01.693Z,1510162561.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:02.059Z,1510162562.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:02.093Z,1510162562.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:02.459Z,1510162562.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:02.494Z,1510162562.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:02.858Z,1510162562.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:02.894Z,1510162562.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:03.263Z,1510162563.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:03.293Z,1510162563.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:03.659Z,1510162563.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:03.693Z,1510162563.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:04.055Z,1510162564.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:04.070Z,1510162564.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:04.458Z,1510162564.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:04.493Z,1510162564.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:04.863Z,1510162564.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:04.894Z,1510162564.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:05.258Z,1510162565.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:05.294Z,1510162565.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:05.642Z,1510162565.642 [NAL9602](INFO): Powering up NAL9602
2017-11-08T17:36:05.659Z,1510162565.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:05.697Z,1510162565.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:06.059Z,1510162566.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:06.094Z,1510162566.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:06.459Z,1510162566.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:06.494Z,1510162566.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:06.855Z,1510162566.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:06.895Z,1510162566.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:07.259Z,1510162567.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:07.275Z,1510162567.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:07.655Z,1510162567.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:07.671Z,1510162567.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:08.060Z,1510162568.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:08.076Z,1510162568.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:08.459Z,1510162568.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:08.476Z,1510162568.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:08.855Z,1510162568.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:08.875Z,1510162568.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:09.255Z,1510162569.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:09.311Z,1510162569.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:09.659Z,1510162569.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:09.679Z,1510162569.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:10.063Z,1510162570.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:10.079Z,1510162570.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:10.463Z,1510162570.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:10.480Z,1510162570.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:10.859Z,1510162570.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:10.891Z,1510162570.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:11.262Z,1510162571.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:11.278Z,1510162571.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:11.661Z,1510162571.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:11.678Z,1510162571.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:12.062Z,1510162572.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:12.078Z,1510162572.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:12.460Z,1510162572.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:12.475Z,1510162572.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:12.862Z,1510162572.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:12.878Z,1510162572.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:13.259Z,1510162573.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:13.279Z,1510162573.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:13.661Z,1510162573.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:13.677Z,1510162573.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:14.061Z,1510162574.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:14.077Z,1510162574.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:14.466Z,1510162574.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:14.483Z,1510162574.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:14.860Z,1510162574.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:14.883Z,1510162574.883 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:14.883Z,1510162574.883 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84
2017-11-08T17:36:14.883Z,1510162574.883 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T17:36:14.885Z,1510162574.885 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:14.885Z,1510162574.885 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84
2017-11-08T17:36:14.885Z,1510162574.885 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T17:36:14.887Z,1510162574.887 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:14.887Z,1510162574.887 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 84
2017-11-08T17:36:14.887Z,1510162574.887 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T17:36:14.989Z,1510162574.989 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T17:36:14.989Z,1510162574.989 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T17:36:14.989Z,1510162574.989 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T17:36:15.264Z,1510162575.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:15.357Z,1510162575.357 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T17:36:15.357Z,1510162575.357 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84
2017-11-08T17:36:15.357Z,1510162575.357 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T17:36:15.357Z,1510162575.357 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84
2017-11-08T17:36:15.358Z,1510162575.358 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T17:36:15.358Z,1510162575.358 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 84
2017-11-08T17:36:15.662Z,1510162575.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:15.686Z,1510162575.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T17:36:15.687Z,1510162575.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:36:15.687Z,1510162575.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:36:15.687Z,1510162575.687 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T17:36:15.688Z,1510162575.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:36:15.688Z,1510162575.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:36:15.692Z,1510162575.692 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T17:36:15.693Z,1510162575.693 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:36:15.693Z,1510162575.693 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:36:16.065Z,1510162576.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:16.080Z,1510162576.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T17:36:16.081Z,1510162576.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:16.474Z,1510162576.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:16.495Z,1510162576.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T17:36:16.496Z,1510162576.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:16.846Z,1510162576.846 [NAL9602](INFO): NAL9602 initialized
2017-11-08T17:36:16.872Z,1510162576.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:16.888Z,1510162576.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T17:36:16.889Z,1510162576.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:17.269Z,1510162577.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:17.285Z,1510162577.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T17:36:17.286Z,1510162577.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:17.674Z,1510162577.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:17.690Z,1510162577.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T17:36:17.691Z,1510162577.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:18.078Z,1510162578.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:18.094Z,1510162578.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T17:36:18.095Z,1510162578.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:18.477Z,1510162578.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:18.499Z,1510162578.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T17:36:18.500Z,1510162578.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:18.865Z,1510162578.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:18.881Z,1510162578.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T17:36:18.882Z,1510162578.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:19.268Z,1510162579.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:19.284Z,1510162579.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T17:36:19.285Z,1510162579.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:19.666Z,1510162579.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:19.682Z,1510162579.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T17:36:19.683Z,1510162579.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:20.068Z,1510162580.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:20.084Z,1510162580.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T17:36:20.085Z,1510162580.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:20.474Z,1510162580.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:20.490Z,1510162580.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T17:36:20.491Z,1510162580.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:20.877Z,1510162580.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:20.893Z,1510162580.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T17:36:20.894Z,1510162580.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:21.274Z,1510162581.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:21.362Z,1510162581.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-08T17:36:21.363Z,1510162581.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:21.669Z,1510162581.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:21.685Z,1510162581.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T17:36:21.686Z,1510162581.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:22.059Z,1510162582.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:22.121Z,1510162582.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T17:36:22.122Z,1510162582.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:22.470Z,1510162582.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:22.485Z,1510162582.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T17:36:22.486Z,1510162582.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:22.859Z,1510162582.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:22.922Z,1510162582.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T17:36:22.923Z,1510162582.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:23.279Z,1510162583.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:23.294Z,1510162583.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T17:36:23.295Z,1510162583.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:23.674Z,1510162583.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:23.694Z,1510162583.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T17:36:23.695Z,1510162583.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:24.079Z,1510162584.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:24.095Z,1510162584.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T17:36:24.096Z,1510162584.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:24.460Z,1510162584.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:24.486Z,1510162584.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T17:36:24.486Z,1510162584.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:24.859Z,1510162584.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:24.891Z,1510162584.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T17:36:24.892Z,1510162584.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:25.280Z,1510162585.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:25.295Z,1510162585.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T17:36:25.296Z,1510162585.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:25.683Z,1510162585.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:25.698Z,1510162585.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T17:36:25.699Z,1510162585.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:26.074Z,1510162586.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:26.094Z,1510162586.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T17:36:26.095Z,1510162586.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:26.470Z,1510162586.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:26.491Z,1510162586.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T17:36:26.492Z,1510162586.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:26.860Z,1510162586.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:26.885Z,1510162586.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T17:36:26.886Z,1510162586.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:27.283Z,1510162587.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:27.303Z,1510162587.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T17:36:27.304Z,1510162587.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:27.679Z,1510162587.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:27.695Z,1510162587.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T17:36:27.696Z,1510162587.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:28.080Z,1510162588.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:28.095Z,1510162588.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T17:36:28.096Z,1510162588.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:28.468Z,1510162588.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:28.484Z,1510162588.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T17:36:28.485Z,1510162588.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:28.859Z,1510162588.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:28.891Z,1510162588.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T17:36:28.892Z,1510162588.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:29.319Z,1510162589.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:29.334Z,1510162589.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T17:36:29.335Z,1510162589.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:29.676Z,1510162589.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:29.692Z,1510162589.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T17:36:29.693Z,1510162589.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:30.083Z,1510162590.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:30.103Z,1510162590.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T17:36:30.104Z,1510162590.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:30.460Z,1510162590.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:30.485Z,1510162590.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T17:36:30.486Z,1510162590.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:30.859Z,1510162590.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:30.885Z,1510162590.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T17:36:30.886Z,1510162590.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:31.275Z,1510162591.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:31.334Z,1510162591.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T17:36:31.335Z,1510162591.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:31.680Z,1510162591.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:31.696Z,1510162591.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T17:36:31.697Z,1510162591.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:32.082Z,1510162592.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:32.100Z,1510162592.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T17:36:32.101Z,1510162592.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:32.460Z,1510162592.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:32.491Z,1510162592.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T17:36:32.492Z,1510162592.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:32.859Z,1510162592.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:32.884Z,1510162592.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T17:36:32.885Z,1510162592.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:33.276Z,1510162593.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:33.292Z,1510162593.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T17:36:33.293Z,1510162593.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:33.682Z,1510162593.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:33.703Z,1510162593.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T17:36:33.704Z,1510162593.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:34.076Z,1510162594.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:34.099Z,1510162594.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T17:36:34.100Z,1510162594.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:34.456Z,1510162594.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:34.487Z,1510162594.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T17:36:34.488Z,1510162594.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:34.859Z,1510162594.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:34.890Z,1510162594.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:35.283Z,1510162595.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:35.299Z,1510162595.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:35.674Z,1510162595.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:35.694Z,1510162595.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:36.075Z,1510162596.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:36.092Z,1510162596.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:36.460Z,1510162596.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:36.485Z,1510162596.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:36.870Z,1510162596.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:36.886Z,1510162596.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:37.276Z,1510162597.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:37.292Z,1510162597.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:37.680Z,1510162597.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:37.696Z,1510162597.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:38.072Z,1510162598.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:38.088Z,1510162598.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:38.470Z,1510162598.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:38.487Z,1510162598.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:38.859Z,1510162598.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:38.884Z,1510162598.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:39.276Z,1510162599.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:39.292Z,1510162599.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:39.679Z,1510162599.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:39.700Z,1510162599.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:40.083Z,1510162600.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:40.103Z,1510162600.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:40.213Z,1510162600.213 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:36:40.213Z,1510162600.213 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T17:36:40.456Z,1510162600.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:40.481Z,1510162600.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:40.549Z,1510162600.549 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:36:40.550Z,1510162600.550 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:36:40.550Z,1510162600.550 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:36:40.550Z,1510162600.550 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T17:36:40.550Z,1510162600.550 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:36:40.557Z,1510162600.557 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:36:40.859Z,1510162600.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:40.896Z,1510162600.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:40.954Z,1510162600.954 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:36:41.066Z,1510162601.066 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:36:41.281Z,1510162601.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:41.299Z,1510162601.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:41.682Z,1510162601.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:41.704Z,1510162601.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:42.076Z,1510162602.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:42.093Z,1510162602.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:42.460Z,1510162602.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:42.492Z,1510162602.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:42.569Z,1510162602.569 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:36:42.569Z,1510162602.569 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T17:36:42.681Z,1510162602.681 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:36:42.681Z,1510162602.681 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:36:42.681Z,1510162602.681 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:36:42.681Z,1510162602.681 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T17:36:42.681Z,1510162602.681 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:36:42.855Z,1510162602.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:42.890Z,1510162602.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:42.969Z,1510162602.969 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:36:43.085Z,1510162603.085 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:36:43.171Z,1510162603.171 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:36:43.283Z,1510162603.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:43.352Z,1510162603.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:43.680Z,1510162603.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:43.733Z,1510162603.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:44.074Z,1510162604.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:44.095Z,1510162604.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:44.459Z,1510162604.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:44.516Z,1510162604.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:44.609Z,1510162604.609 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:36:44.609Z,1510162604.609 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T17:36:44.785Z,1510162604.785 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:36:44.785Z,1510162604.785 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:36:44.785Z,1510162604.785 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:36:44.785Z,1510162604.785 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T17:36:44.786Z,1510162604.786 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:36:44.860Z,1510162604.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:44.906Z,1510162604.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:44.989Z,1510162604.989 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:36:45.189Z,1510162605.189 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:36:45.273Z,1510162605.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:45.340Z,1510162605.340 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:36:45.347Z,1510162605.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:45.684Z,1510162605.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:45.700Z,1510162605.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:46.069Z,1510162606.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:46.103Z,1510162606.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:46.461Z,1510162606.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:46.499Z,1510162606.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:46.583Z,1510162606.583 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:36:46.583Z,1510162606.583 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T17:36:46.860Z,1510162606.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:46.876Z,1510162606.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:46.957Z,1510162606.957 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:36:46.957Z,1510162606.957 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:36:46.957Z,1510162606.957 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:36:46.958Z,1510162606.958 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T17:36:46.958Z,1510162606.958 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:36:46.973Z,1510162606.973 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:36:47.270Z,1510162607.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:47.302Z,1510162607.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:47.362Z,1510162607.362 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:36:47.467Z,1510162607.467 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:36:47.674Z,1510162607.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:47.703Z,1510162607.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:48.078Z,1510162608.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:48.108Z,1510162608.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:48.460Z,1510162608.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:48.477Z,1510162608.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:48.859Z,1510162608.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:48.877Z,1510162608.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:48.977Z,1510162608.977 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:36:48.977Z,1510162608.977 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T17:36:49.082Z,1510162609.082 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:36:49.083Z,1510162609.083 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:36:49.083Z,1510162609.083 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:36:49.083Z,1510162609.083 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T17:36:49.083Z,1510162609.083 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:36:49.270Z,1510162609.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:49.304Z,1510162609.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:49.390Z,1510162609.390 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:36:49.391Z,1510162609.391 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:36:49.485Z,1510162609.485 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:36:49.570Z,1510162609.570 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:36:49.678Z,1510162609.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:49.706Z,1510162609.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:50.070Z,1510162610.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:50.103Z,1510162610.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:50.463Z,1510162610.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:50.485Z,1510162610.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:50.864Z,1510162610.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:50.880Z,1510162610.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:53.962Z,1510162613.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:54.016Z,1510162614.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:54.152Z,1510162614.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:54.176Z,1510162614.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:54.549Z,1510162614.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:54.572Z,1510162614.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:54.924Z,1510162614.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:54.957Z,1510162614.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:55.327Z,1510162615.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:55.362Z,1510162615.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:55.724Z,1510162615.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:55.765Z,1510162615.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:56.123Z,1510162616.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:56.169Z,1510162616.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:56.534Z,1510162616.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:56.567Z,1510162616.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:56.941Z,1510162616.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:56.968Z,1510162616.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:57.338Z,1510162617.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:57.365Z,1510162617.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:57.723Z,1510162617.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:57.740Z,1510162617.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:58.122Z,1510162618.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:58.138Z,1510162618.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:58.528Z,1510162618.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:58.545Z,1510162618.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:58.927Z,1510162618.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:58.943Z,1510162618.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:59.339Z,1510162619.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:59.371Z,1510162619.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:36:59.733Z,1510162619.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:36:59.765Z,1510162619.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:00.138Z,1510162620.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:00.171Z,1510162620.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:00.526Z,1510162620.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:00.542Z,1510162620.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:00.926Z,1510162620.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:00.943Z,1510162620.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:01.326Z,1510162621.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:01.343Z,1510162621.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:01.724Z,1510162621.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:01.744Z,1510162621.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:02.126Z,1510162622.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:02.143Z,1510162622.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:02.538Z,1510162622.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:02.554Z,1510162622.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:02.933Z,1510162622.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:02.949Z,1510162622.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:03.338Z,1510162623.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:03.354Z,1510162623.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:03.726Z,1510162623.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:03.748Z,1510162623.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:04.129Z,1510162624.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:04.145Z,1510162624.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:04.529Z,1510162624.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:04.546Z,1510162624.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:04.928Z,1510162624.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:04.945Z,1510162624.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:05.333Z,1510162625.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:05.350Z,1510162625.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:05.738Z,1510162625.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:05.754Z,1510162625.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:06.134Z,1510162626.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:06.230Z,1510162626.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:06.530Z,1510162626.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:06.546Z,1510162626.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:06.929Z,1510162626.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:06.946Z,1510162626.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:07.329Z,1510162627.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:07.383Z,1510162627.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:07.730Z,1510162627.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:07.746Z,1510162627.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:08.122Z,1510162628.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:08.175Z,1510162628.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:08.539Z,1510162628.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:08.559Z,1510162628.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:08.939Z,1510162628.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:08.955Z,1510162628.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:09.339Z,1510162629.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:09.359Z,1510162629.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:09.729Z,1510162629.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:09.745Z,1510162629.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:10.126Z,1510162630.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:10.143Z,1510162630.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:10.520Z,1510162630.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:10.552Z,1510162630.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:10.923Z,1510162630.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:10.955Z,1510162630.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:11.348Z,1510162631.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:11.364Z,1510162631.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:11.739Z,1510162631.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:11.755Z,1510162631.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:12.140Z,1510162632.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:12.156Z,1510162632.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:12.524Z,1510162632.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:12.552Z,1510162632.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:12.924Z,1510162632.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:12.949Z,1510162632.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:13.324Z,1510162633.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:13.349Z,1510162633.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:13.724Z,1510162633.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:13.750Z,1510162633.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:14.119Z,1510162634.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:14.151Z,1510162634.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:14.534Z,1510162634.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:14.568Z,1510162634.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:14.945Z,1510162634.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:14.966Z,1510162634.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:15.330Z,1510162635.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:15.357Z,1510162635.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:15.723Z,1510162635.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:15.758Z,1510162635.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:16.120Z,1510162636.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:16.136Z,1510162636.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:16.524Z,1510162636.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:16.582Z,1510162636.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:16.923Z,1510162636.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:16.959Z,1510162636.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:17.338Z,1510162637.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:17.365Z,1510162637.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:17.738Z,1510162637.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:17.763Z,1510162637.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:18.134Z,1510162638.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:18.166Z,1510162638.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:18.523Z,1510162638.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:18.540Z,1510162638.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:18.927Z,1510162638.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:18.967Z,1510162638.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:19.324Z,1510162639.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:19.352Z,1510162639.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:19.727Z,1510162639.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:19.747Z,1510162639.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:20.125Z,1510162640.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:20.141Z,1510162640.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:20.538Z,1510162640.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:20.554Z,1510162640.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:20.937Z,1510162640.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:20.953Z,1510162640.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:21.334Z,1510162641.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:21.350Z,1510162641.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:21.728Z,1510162641.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:21.744Z,1510162641.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:22.128Z,1510162642.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:22.149Z,1510162642.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:22.529Z,1510162642.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:22.546Z,1510162642.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:22.927Z,1510162642.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:22.948Z,1510162642.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:23.338Z,1510162643.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:23.354Z,1510162643.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:23.734Z,1510162643.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:23.750Z,1510162643.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:24.130Z,1510162644.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:24.151Z,1510162644.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:24.529Z,1510162644.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:24.545Z,1510162644.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:24.927Z,1510162644.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:24.948Z,1510162644.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:25.328Z,1510162645.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:25.344Z,1510162645.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:25.725Z,1510162645.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:25.750Z,1510162645.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:26.125Z,1510162646.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:26.141Z,1510162646.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:26.534Z,1510162646.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:26.550Z,1510162646.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:26.938Z,1510162646.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:26.954Z,1510162646.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:27.334Z,1510162647.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:27.351Z,1510162647.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:27.729Z,1510162647.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:27.746Z,1510162647.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:28.129Z,1510162648.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:28.146Z,1510162648.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:28.526Z,1510162648.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:28.603Z,1510162648.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:28.929Z,1510162648.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:28.946Z,1510162648.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:29.338Z,1510162649.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:29.387Z,1510162649.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:29.738Z,1510162649.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:29.754Z,1510162649.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:30.134Z,1510162650.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:30.187Z,1510162650.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:30.531Z,1510162650.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:30.551Z,1510162650.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:30.923Z,1510162650.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:30.944Z,1510162650.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:31.327Z,1510162651.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:31.355Z,1510162651.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:31.727Z,1510162651.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:31.743Z,1510162651.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:32.125Z,1510162652.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:32.141Z,1510162652.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:32.535Z,1510162652.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:32.551Z,1510162652.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:32.934Z,1510162652.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:32.950Z,1510162652.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:33.330Z,1510162653.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:33.351Z,1510162653.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:33.728Z,1510162653.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:33.745Z,1510162653.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:34.126Z,1510162654.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:34.148Z,1510162654.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:34.526Z,1510162654.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:34.542Z,1510162654.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:34.929Z,1510162654.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:34.945Z,1510162654.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:35.333Z,1510162655.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:35.356Z,1510162655.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:35.734Z,1510162655.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:35.750Z,1510162655.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:36.134Z,1510162656.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:36.150Z,1510162656.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:36.526Z,1510162656.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:36.542Z,1510162656.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:36.926Z,1510162656.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:36.943Z,1510162656.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:37.328Z,1510162657.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:37.345Z,1510162657.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:37.727Z,1510162657.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:37.742Z,1510162657.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:38.125Z,1510162658.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:38.142Z,1510162658.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:38.534Z,1510162658.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:38.591Z,1510162658.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:38.937Z,1510162658.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:38.953Z,1510162658.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:39.334Z,1510162659.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:39.351Z,1510162659.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:39.723Z,1510162659.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:39.754Z,1510162659.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:40.123Z,1510162660.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:40.155Z,1510162660.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:40.520Z,1510162660.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:40.552Z,1510162660.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:40.923Z,1510162660.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:40.958Z,1510162660.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:41.333Z,1510162661.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:41.368Z,1510162661.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:41.733Z,1510162661.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:41.764Z,1510162661.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:42.134Z,1510162662.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:42.167Z,1510162662.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:42.519Z,1510162662.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:42.535Z,1510162662.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:42.923Z,1510162662.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:42.940Z,1510162662.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:43.323Z,1510162663.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:43.339Z,1510162663.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:43.722Z,1510162663.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:43.738Z,1510162663.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:44.124Z,1510162664.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:44.140Z,1510162664.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:44.534Z,1510162664.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:44.562Z,1510162664.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:44.941Z,1510162664.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:44.965Z,1510162664.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:45.338Z,1510162665.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:45.362Z,1510162665.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:45.726Z,1510162665.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:45.742Z,1510162665.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:46.123Z,1510162666.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:46.139Z,1510162666.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:46.525Z,1510162666.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:46.541Z,1510162666.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:46.924Z,1510162666.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:46.952Z,1510162666.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:47.334Z,1510162667.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:47.355Z,1510162667.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:47.737Z,1510162667.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:47.754Z,1510162667.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:48.134Z,1510162668.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:48.150Z,1510162668.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:48.526Z,1510162668.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:48.542Z,1510162668.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:48.929Z,1510162668.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:48.945Z,1510162668.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:49.329Z,1510162669.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:49.345Z,1510162669.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:49.727Z,1510162669.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:49.747Z,1510162669.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:50.129Z,1510162670.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:50.191Z,1510162670.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:50.542Z,1510162670.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:50.592Z,1510162670.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:50.939Z,1510162670.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:50.955Z,1510162670.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:54.030Z,1510162674.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:54.088Z,1510162674.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:54.203Z,1510162674.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:54.247Z,1510162674.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:54.600Z,1510162674.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:54.655Z,1510162674.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:55.003Z,1510162675.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:55.038Z,1510162675.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:55.410Z,1510162675.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:55.436Z,1510162675.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:55.813Z,1510162675.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:55.838Z,1510162675.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:56.212Z,1510162676.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:56.238Z,1510162676.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:56.599Z,1510162676.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:56.639Z,1510162676.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:56.995Z,1510162676.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:57.011Z,1510162677.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:57.399Z,1510162677.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:57.419Z,1510162677.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:57.800Z,1510162677.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:57.833Z,1510162677.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:58.199Z,1510162678.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:58.215Z,1510162678.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:58.618Z,1510162678.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:58.646Z,1510162678.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:59.017Z,1510162679.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:59.049Z,1510162679.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:59.409Z,1510162679.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:59.431Z,1510162679.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:37:59.806Z,1510162679.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:37:59.822Z,1510162679.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:00.205Z,1510162680.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:00.222Z,1510162680.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:00.603Z,1510162680.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:00.623Z,1510162680.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:01.005Z,1510162681.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:01.022Z,1510162681.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:01.410Z,1510162681.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:01.427Z,1510162681.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:01.809Z,1510162681.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:01.831Z,1510162681.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:02.214Z,1510162682.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:02.235Z,1510162682.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:02.603Z,1510162682.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:02.633Z,1510162682.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:03.002Z,1510162683.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:03.053Z,1510162683.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:03.405Z,1510162683.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:03.421Z,1510162683.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:03.803Z,1510162683.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:03.834Z,1510162683.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:04.199Z,1510162684.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:04.229Z,1510162684.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:04.615Z,1510162684.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:04.636Z,1510162684.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:05.014Z,1510162685.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:05.036Z,1510162685.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:05.415Z,1510162685.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:05.431Z,1510162685.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:05.806Z,1510162685.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:05.822Z,1510162685.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:06.203Z,1510162686.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:06.233Z,1510162686.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:06.602Z,1510162686.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:06.617Z,1510162686.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:06.998Z,1510162686.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:07.029Z,1510162687.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:07.415Z,1510162687.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:07.431Z,1510162687.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:07.815Z,1510162687.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:07.835Z,1510162687.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:08.215Z,1510162688.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:08.235Z,1510162688.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:08.603Z,1510162688.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:08.632Z,1510162688.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:09.002Z,1510162689.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:09.018Z,1510162689.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:09.406Z,1510162689.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:09.422Z,1510162689.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:09.803Z,1510162689.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:09.833Z,1510162689.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:10.206Z,1510162690.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:10.222Z,1510162690.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:10.615Z,1510162690.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:10.635Z,1510162690.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:11.015Z,1510162691.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:11.036Z,1510162691.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:11.415Z,1510162691.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:11.435Z,1510162691.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:11.806Z,1510162691.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:11.822Z,1510162691.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:12.206Z,1510162692.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:12.222Z,1510162692.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:12.607Z,1510162692.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:12.622Z,1510162692.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:13.005Z,1510162693.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:13.028Z,1510162693.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:13.414Z,1510162693.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:13.431Z,1510162693.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:13.816Z,1510162693.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:13.839Z,1510162693.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:14.215Z,1510162694.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:14.235Z,1510162694.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:14.606Z,1510162694.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:14.622Z,1510162694.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:15.004Z,1510162695.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:15.075Z,1510162695.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:15.399Z,1510162695.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:15.431Z,1510162695.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:15.800Z,1510162695.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:15.868Z,1510162695.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:16.203Z,1510162696.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:16.230Z,1510162696.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:16.610Z,1510162696.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:16.671Z,1510162696.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:17.020Z,1510162697.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:17.036Z,1510162697.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:17.417Z,1510162697.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:17.432Z,1510162697.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:17.800Z,1510162697.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:17.826Z,1510162697.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:18.199Z,1510162698.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:18.225Z,1510162698.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:18.600Z,1510162698.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:18.627Z,1510162698.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:18.995Z,1510162698.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:19.027Z,1510162699.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:19.417Z,1510162699.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:19.433Z,1510162699.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:19.817Z,1510162699.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:19.833Z,1510162699.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:20.211Z,1510162700.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:20.245Z,1510162700.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:20.599Z,1510162700.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:20.632Z,1510162700.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:20.995Z,1510162700.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:21.010Z,1510162701.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:21.399Z,1510162701.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:21.440Z,1510162701.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:21.800Z,1510162701.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:21.843Z,1510162701.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:22.199Z,1510162702.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:22.215Z,1510162702.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:22.610Z,1510162702.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:22.634Z,1510162702.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:23.017Z,1510162703.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:23.049Z,1510162703.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:23.413Z,1510162703.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:23.454Z,1510162703.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:23.799Z,1510162703.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:23.819Z,1510162703.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:24.203Z,1510162704.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:24.223Z,1510162704.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:24.603Z,1510162704.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:24.618Z,1510162704.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:25.003Z,1510162705.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:25.055Z,1510162705.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:25.414Z,1510162705.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:25.448Z,1510162705.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:25.818Z,1510162705.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:25.848Z,1510162705.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:26.215Z,1510162706.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:26.247Z,1510162706.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:26.602Z,1510162706.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:26.618Z,1510162706.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:27.001Z,1510162707.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:27.017Z,1510162707.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:27.403Z,1510162707.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:27.419Z,1510162707.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:27.803Z,1510162707.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:27.824Z,1510162707.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:28.202Z,1510162708.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:28.218Z,1510162708.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:28.610Z,1510162708.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:28.626Z,1510162708.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:29.017Z,1510162709.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:29.054Z,1510162709.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:29.409Z,1510162709.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:29.425Z,1510162709.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:29.840Z,1510162709.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:29.857Z,1510162709.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:30.205Z,1510162710.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:30.221Z,1510162710.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:30.604Z,1510162710.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:30.631Z,1510162710.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:31.005Z,1510162711.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:31.021Z,1510162711.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:31.410Z,1510162711.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:31.426Z,1510162711.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:31.809Z,1510162711.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:31.831Z,1510162711.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:32.210Z,1510162712.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:32.229Z,1510162712.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:32.605Z,1510162712.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:32.621Z,1510162712.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:33.005Z,1510162713.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:33.027Z,1510162713.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:33.405Z,1510162713.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:33.421Z,1510162713.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:33.804Z,1510162713.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:33.824Z,1510162713.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:34.205Z,1510162714.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:34.221Z,1510162714.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:34.610Z,1510162714.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:34.627Z,1510162714.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:35.013Z,1510162715.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:35.030Z,1510162715.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:35.413Z,1510162715.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:35.429Z,1510162715.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:35.805Z,1510162715.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:35.821Z,1510162715.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:36.205Z,1510162716.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:36.221Z,1510162716.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:36.603Z,1510162716.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:36.623Z,1510162716.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:37.005Z,1510162717.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:37.067Z,1510162717.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:37.414Z,1510162717.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:37.483Z,1510162717.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:37.820Z,1510162717.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:37.835Z,1510162717.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:38.217Z,1510162718.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:38.321Z,1510162718.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:38.603Z,1510162718.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:38.663Z,1510162718.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:38.996Z,1510162718.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:39.022Z,1510162719.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:39.407Z,1510162719.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:39.467Z,1510162719.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:39.796Z,1510162719.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:39.828Z,1510162719.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:40.199Z,1510162720.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:40.226Z,1510162720.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:40.610Z,1510162720.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:40.633Z,1510162720.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:41.020Z,1510162721.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:41.037Z,1510162721.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:41.416Z,1510162721.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:41.433Z,1510162721.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:41.795Z,1510162721.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:41.831Z,1510162721.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:42.199Z,1510162722.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:42.224Z,1510162722.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:42.600Z,1510162722.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:42.625Z,1510162722.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:42.995Z,1510162722.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:43.026Z,1510162723.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:43.415Z,1510162723.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:43.432Z,1510162723.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:43.820Z,1510162723.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:43.835Z,1510162723.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:44.210Z,1510162724.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:44.242Z,1510162724.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:44.599Z,1510162724.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:44.634Z,1510162724.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:44.995Z,1510162724.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:45.037Z,1510162725.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:45.399Z,1510162725.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:45.434Z,1510162725.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:45.800Z,1510162725.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:45.832Z,1510162725.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:46.195Z,1510162726.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:46.215Z,1510162726.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:46.606Z,1510162726.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:46.638Z,1510162726.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:47.013Z,1510162727.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:47.040Z,1510162727.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:47.413Z,1510162727.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:47.440Z,1510162727.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:47.795Z,1510162727.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:47.851Z,1510162727.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:48.199Z,1510162728.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:48.219Z,1510162728.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:48.600Z,1510162728.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:48.623Z,1510162728.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:48.999Z,1510162728.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:49.016Z,1510162729.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:49.410Z,1510162729.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:49.434Z,1510162729.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:49.813Z,1510162729.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:49.845Z,1510162729.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:50.210Z,1510162730.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:50.242Z,1510162730.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:50.603Z,1510162730.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:50.620Z,1510162730.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:51.003Z,1510162731.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:51.019Z,1510162731.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:54.087Z,1510162734.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:54.105Z,1510162734.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:54.215Z,1510162734.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:54.255Z,1510162734.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:54.641Z,1510162734.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:54.657Z,1510162734.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:55.036Z,1510162735.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:55.052Z,1510162735.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:55.440Z,1510162735.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:55.456Z,1510162735.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:55.811Z,1510162735.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:55.852Z,1510162735.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:56.215Z,1510162736.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:56.249Z,1510162736.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:56.615Z,1510162736.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:56.650Z,1510162736.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:57.016Z,1510162737.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:57.053Z,1510162737.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:57.426Z,1510162737.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:57.459Z,1510162737.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:57.839Z,1510162737.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:57.856Z,1510162737.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:58.225Z,1510162738.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:58.258Z,1510162738.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:58.616Z,1510162738.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:58.653Z,1510162738.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:59.016Z,1510162739.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:59.032Z,1510162739.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:59.416Z,1510162739.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:59.483Z,1510162739.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:38:59.811Z,1510162739.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:38:59.883Z,1510162739.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:00.234Z,1510162740.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:00.264Z,1510162740.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:00.634Z,1510162740.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:00.684Z,1510162740.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:01.030Z,1510162741.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:01.063Z,1510162741.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:01.420Z,1510162741.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:01.467Z,1510162741.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:01.819Z,1510162741.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:01.835Z,1510162741.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:02.226Z,1510162742.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:02.259Z,1510162742.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:02.633Z,1510162742.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:02.674Z,1510162742.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:03.029Z,1510162743.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:03.069Z,1510162743.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:03.420Z,1510162743.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:03.436Z,1510162743.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:03.819Z,1510162743.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:03.839Z,1510162743.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:04.229Z,1510162744.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:04.268Z,1510162744.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:04.625Z,1510162744.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:04.641Z,1510162744.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:05.030Z,1510162745.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:05.062Z,1510162745.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:05.418Z,1510162745.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:05.433Z,1510162745.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:05.819Z,1510162745.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:05.836Z,1510162745.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:06.218Z,1510162746.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:06.235Z,1510162746.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:06.630Z,1510162746.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:06.646Z,1510162746.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:07.030Z,1510162747.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:07.046Z,1510162747.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:07.426Z,1510162747.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:07.442Z,1510162747.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:07.818Z,1510162747.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:07.840Z,1510162747.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:08.217Z,1510162748.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:08.233Z,1510162748.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:08.620Z,1510162748.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:08.640Z,1510162748.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:09.021Z,1510162749.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:09.036Z,1510162749.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:09.422Z,1510162749.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:09.443Z,1510162749.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:09.829Z,1510162749.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:09.884Z,1510162749.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:10.225Z,1510162750.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:10.247Z,1510162750.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:10.614Z,1510162750.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:10.643Z,1510162750.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:11.014Z,1510162751.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:11.039Z,1510162751.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:11.423Z,1510162751.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:11.439Z,1510162751.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:11.822Z,1510162751.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:11.844Z,1510162751.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:12.231Z,1510162752.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:12.248Z,1510162752.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:12.631Z,1510162752.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:12.651Z,1510162752.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:13.028Z,1510162753.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:13.044Z,1510162753.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:13.419Z,1510162753.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:13.449Z,1510162753.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:13.822Z,1510162753.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:13.838Z,1510162753.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:14.228Z,1510162754.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:14.244Z,1510162754.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:14.630Z,1510162754.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:14.652Z,1510162754.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:15.032Z,1510162755.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:15.055Z,1510162755.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:15.421Z,1510162755.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:15.441Z,1510162755.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:15.821Z,1510162755.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:15.837Z,1510162755.837 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:15.837Z,1510162755.837 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85
2017-11-08T17:39:15.837Z,1510162755.837 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T17:39:15.839Z,1510162755.839 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:15.839Z,1510162755.839 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85
2017-11-08T17:39:15.839Z,1510162755.839 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T17:39:15.841Z,1510162755.841 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:15.841Z,1510162755.841 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 85
2017-11-08T17:39:15.841Z,1510162755.841 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T17:39:15.917Z,1510162755.917 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T17:39:15.917Z,1510162755.917 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T17:39:15.917Z,1510162755.917 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T17:39:16.230Z,1510162756.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:16.345Z,1510162756.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T17:39:16.345Z,1510162756.345 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85
2017-11-08T17:39:16.346Z,1510162756.346 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T17:39:16.346Z,1510162756.346 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85
2017-11-08T17:39:16.346Z,1510162756.346 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T17:39:16.346Z,1510162756.346 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 85
2017-11-08T17:39:16.631Z,1510162756.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:16.646Z,1510162756.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T17:39:16.647Z,1510162756.647 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:39:16.647Z,1510162756.647 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:39:16.648Z,1510162756.648 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T17:39:16.648Z,1510162756.648 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:39:16.649Z,1510162756.649 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:39:16.649Z,1510162756.649 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T17:39:16.649Z,1510162756.649 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:39:16.650Z,1510162756.650 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:39:17.031Z,1510162757.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:17.047Z,1510162757.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T17:39:17.048Z,1510162757.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:17.423Z,1510162757.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:17.438Z,1510162757.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T17:39:17.439Z,1510162757.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:17.819Z,1510162757.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:17.835Z,1510162757.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T17:39:17.836Z,1510162757.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:18.231Z,1510162758.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:18.251Z,1510162758.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T17:39:18.252Z,1510162758.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:18.632Z,1510162758.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:18.653Z,1510162758.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T17:39:18.654Z,1510162758.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:19.031Z,1510162759.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:19.047Z,1510162759.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T17:39:19.048Z,1510162759.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:19.420Z,1510162759.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:19.442Z,1510162759.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T17:39:19.443Z,1510162759.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:19.823Z,1510162759.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:19.839Z,1510162759.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T17:39:19.840Z,1510162759.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:20.232Z,1510162760.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:20.248Z,1510162760.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T17:39:20.249Z,1510162760.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:20.631Z,1510162760.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:20.651Z,1510162760.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T17:39:20.652Z,1510162760.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:21.032Z,1510162761.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:21.055Z,1510162761.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T17:39:21.056Z,1510162761.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:21.422Z,1510162761.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:21.444Z,1510162761.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T17:39:21.445Z,1510162761.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:21.821Z,1510162761.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:21.838Z,1510162761.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T17:39:21.839Z,1510162761.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:22.236Z,1510162762.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:22.334Z,1510162762.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-08T17:39:22.335Z,1510162762.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:22.631Z,1510162762.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:22.647Z,1510162762.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T17:39:22.648Z,1510162762.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:23.031Z,1510162763.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:23.047Z,1510162763.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T17:39:23.049Z,1510162763.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:23.416Z,1510162763.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:23.479Z,1510162763.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T17:39:23.480Z,1510162763.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:23.816Z,1510162763.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:23.840Z,1510162763.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T17:39:23.841Z,1510162763.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:24.215Z,1510162764.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:24.279Z,1510162764.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T17:39:24.280Z,1510162764.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:24.635Z,1510162764.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:24.655Z,1510162764.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T17:39:24.656Z,1510162764.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:25.035Z,1510162765.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:25.051Z,1510162765.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T17:39:25.052Z,1510162765.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:25.431Z,1510162765.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:25.447Z,1510162765.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T17:39:25.448Z,1510162765.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:25.816Z,1510162765.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:25.844Z,1510162765.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T17:39:25.849Z,1510162765.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:26.213Z,1510162766.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:26.249Z,1510162766.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T17:39:26.250Z,1510162766.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:26.616Z,1510162766.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:26.648Z,1510162766.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T17:39:26.649Z,1510162766.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:27.015Z,1510162767.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:27.031Z,1510162767.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T17:39:27.032Z,1510162767.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:27.426Z,1510162767.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:27.458Z,1510162767.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T17:39:27.459Z,1510162767.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:27.829Z,1510162767.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:27.855Z,1510162767.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T17:39:27.856Z,1510162767.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:28.230Z,1510162768.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:28.256Z,1510162768.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T17:39:28.257Z,1510162768.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:28.615Z,1510162768.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:28.635Z,1510162768.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T17:39:28.636Z,1510162768.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:29.019Z,1510162769.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:29.039Z,1510162769.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T17:39:29.040Z,1510162769.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:29.419Z,1510162769.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:29.439Z,1510162769.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T17:39:29.440Z,1510162769.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:29.819Z,1510162769.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:29.839Z,1510162769.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T17:39:29.840Z,1510162769.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:30.219Z,1510162770.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:30.234Z,1510162770.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T17:39:30.235Z,1510162770.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:30.626Z,1510162770.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:30.642Z,1510162770.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T17:39:30.643Z,1510162770.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:31.029Z,1510162771.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:31.063Z,1510162771.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T17:39:31.064Z,1510162771.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:31.430Z,1510162771.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:31.461Z,1510162771.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T17:39:31.462Z,1510162771.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:31.819Z,1510162771.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:31.839Z,1510162771.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T17:39:31.840Z,1510162771.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:32.221Z,1510162772.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:32.236Z,1510162772.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T17:39:32.237Z,1510162772.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:32.620Z,1510162772.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:32.671Z,1510162772.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T17:39:32.672Z,1510162772.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:33.022Z,1510162773.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:33.038Z,1510162773.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T17:39:33.039Z,1510162773.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:33.426Z,1510162773.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:33.442Z,1510162773.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T17:39:33.443Z,1510162773.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:33.830Z,1510162773.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:33.845Z,1510162773.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T17:39:33.846Z,1510162773.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:34.230Z,1510162774.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:34.245Z,1510162774.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T17:39:34.246Z,1510162774.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:34.618Z,1510162774.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:34.633Z,1510162774.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T17:39:34.634Z,1510162774.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:35.022Z,1510162775.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:35.038Z,1510162775.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T17:39:35.038Z,1510162775.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:35.422Z,1510162775.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:35.438Z,1510162775.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T17:39:35.439Z,1510162775.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:35.817Z,1510162775.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:35.837Z,1510162775.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-08T17:39:35.838Z,1510162775.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:36.224Z,1510162776.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:36.240Z,1510162776.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:36.626Z,1510162776.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:36.642Z,1510162776.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:37.026Z,1510162777.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:37.042Z,1510162777.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:37.427Z,1510162777.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:37.443Z,1510162777.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:37.819Z,1510162777.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:37.836Z,1510162777.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:38.219Z,1510162778.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:38.235Z,1510162778.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:38.620Z,1510162778.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:38.653Z,1510162778.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:39.019Z,1510162779.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:39.035Z,1510162779.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:39.427Z,1510162779.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:39.451Z,1510162779.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:39.830Z,1510162779.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:39.851Z,1510162779.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:40.232Z,1510162780.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:40.249Z,1510162780.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:40.615Z,1510162780.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:40.638Z,1510162780.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:41.019Z,1510162781.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:41.050Z,1510162781.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:41.419Z,1510162781.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:41.435Z,1510162781.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:41.817Z,1510162781.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:41.838Z,1510162781.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:42.220Z,1510162782.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:42.249Z,1510162782.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:42.627Z,1510162782.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:42.647Z,1510162782.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:43.030Z,1510162783.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:43.047Z,1510162783.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:43.427Z,1510162783.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:43.448Z,1510162783.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:43.819Z,1510162783.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:43.835Z,1510162783.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:44.214Z,1510162784.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:44.239Z,1510162784.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:44.622Z,1510162784.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:44.711Z,1510162784.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:45.011Z,1510162785.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:45.036Z,1510162785.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:45.432Z,1510162785.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:45.491Z,1510162785.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:45.835Z,1510162785.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:45.852Z,1510162785.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:46.231Z,1510162786.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:46.279Z,1510162786.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:46.611Z,1510162786.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:46.640Z,1510162786.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:47.015Z,1510162787.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:47.040Z,1510162787.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:47.411Z,1510162787.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:47.446Z,1510162787.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:47.812Z,1510162787.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:47.846Z,1510162787.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:48.215Z,1510162788.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:48.247Z,1510162788.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:48.632Z,1510162788.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:48.649Z,1510162788.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:49.031Z,1510162789.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:49.047Z,1510162789.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:49.434Z,1510162789.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:49.458Z,1510162789.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:49.811Z,1510162789.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:49.846Z,1510162789.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:50.211Z,1510162790.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:50.246Z,1510162790.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:50.620Z,1510162790.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:50.645Z,1510162790.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:50.648Z,1510162790.648 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T17:39:50.649Z,1510162790.649 [Default:CheckIn:C.Wait] Stopped
2017-11-08T17:39:50.649Z,1510162790.649 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T17:39:50.649Z,1510162790.649 [Default:CheckIn:D] Running Loop=1
2017-11-08T17:39:51.015Z,1510162791.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:51.045Z,1510162791.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:51.049Z,1510162791.049 [Default:CheckIn:D] Stopped
2017-11-08T17:39:51.049Z,1510162791.049 [Default:CheckIn:E] Running Loop=1
2017-11-08T17:39:54.110Z,1510162794.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:54.144Z,1510162794.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:54.147Z,1510162794.147 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 253.167806 min 
2017-11-08T17:39:54.148Z,1510162794.148 [Default:CheckIn:E] Stopped
2017-11-08T17:39:54.148Z,1510162794.148 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T17:39:54.148Z,1510162794.148 [Default:CheckIn] Stopped
2017-11-08T17:39:54.148Z,1510162794.148 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T17:39:54.148Z,1510162794.148 [Default:CheckIn](INFO): Running loop #13
2017-11-08T17:39:54.148Z,1510162794.148 [Default:CheckIn] Running Loop=13
2017-11-08T17:39:54.149Z,1510162794.149 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T17:39:54.149Z,1510162794.149 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T17:39:54.266Z,1510162794.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:54.325Z,1510162794.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:54.674Z,1510162794.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:54.712Z,1510162794.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:55.062Z,1510162795.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:55.079Z,1510162795.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:55.459Z,1510162795.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:55.476Z,1510162795.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:55.857Z,1510162795.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:55.875Z,1510162795.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:56.270Z,1510162796.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:56.286Z,1510162796.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:56.670Z,1510162796.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:56.686Z,1510162796.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:57.065Z,1510162797.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:57.081Z,1510162797.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:57.462Z,1510162797.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:57.478Z,1510162797.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:57.860Z,1510162797.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:57.877Z,1510162797.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:58.264Z,1510162798.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:58.281Z,1510162798.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:58.670Z,1510162798.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:58.686Z,1510162798.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:59.066Z,1510162799.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:59.082Z,1510162799.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:59.458Z,1510162799.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:59.475Z,1510162799.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:39:59.861Z,1510162799.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:39:59.877Z,1510162799.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:00.270Z,1510162800.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:00.286Z,1510162800.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:00.665Z,1510162800.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:00.681Z,1510162800.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:01.070Z,1510162801.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:01.086Z,1510162801.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:01.460Z,1510162801.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:01.485Z,1510162801.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:01.858Z,1510162801.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:01.878Z,1510162801.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:02.270Z,1510162802.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:02.286Z,1510162802.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:02.674Z,1510162802.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:02.695Z,1510162802.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:03.073Z,1510162803.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:03.089Z,1510162803.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:03.456Z,1510162803.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:03.487Z,1510162803.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:03.855Z,1510162803.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:03.887Z,1510162803.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:04.271Z,1510162804.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:04.288Z,1510162804.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:04.675Z,1510162804.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:04.693Z,1510162804.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:05.072Z,1510162805.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:05.089Z,1510162805.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:05.452Z,1510162805.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:05.483Z,1510162805.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:05.856Z,1510162805.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:05.881Z,1510162805.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:06.267Z,1510162806.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:06.332Z,1510162806.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:06.672Z,1510162806.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:06.688Z,1510162806.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:07.072Z,1510162807.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:07.131Z,1510162807.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:07.456Z,1510162807.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:07.481Z,1510162807.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:07.855Z,1510162807.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:07.904Z,1510162807.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:08.276Z,1510162808.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:08.292Z,1510162808.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:08.676Z,1510162808.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:08.692Z,1510162808.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:09.069Z,1510162809.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:09.098Z,1510162809.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:09.456Z,1510162809.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:09.481Z,1510162809.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:09.855Z,1510162809.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:09.887Z,1510162809.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:10.272Z,1510162810.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:10.288Z,1510162810.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:10.671Z,1510162810.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:10.691Z,1510162810.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:11.071Z,1510162811.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:11.091Z,1510162811.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:11.452Z,1510162811.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:11.486Z,1510162811.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:11.855Z,1510162811.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:11.880Z,1510162811.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:12.271Z,1510162812.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:12.287Z,1510162812.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:12.672Z,1510162812.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:12.688Z,1510162812.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:13.076Z,1510162813.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:13.092Z,1510162813.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:13.456Z,1510162813.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:13.487Z,1510162813.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:13.851Z,1510162813.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:13.882Z,1510162813.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:14.276Z,1510162814.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:14.292Z,1510162814.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:14.676Z,1510162814.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:14.692Z,1510162814.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:15.071Z,1510162815.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:15.099Z,1510162815.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:15.456Z,1510162815.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:15.481Z,1510162815.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:15.855Z,1510162815.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:15.886Z,1510162815.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:16.272Z,1510162816.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:16.325Z,1510162816.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:16.675Z,1510162816.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:16.691Z,1510162816.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:17.072Z,1510162817.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:17.089Z,1510162817.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:17.452Z,1510162817.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:17.487Z,1510162817.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:17.855Z,1510162817.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:17.881Z,1510162817.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:18.271Z,1510162818.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:18.288Z,1510162818.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:18.674Z,1510162818.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:18.690Z,1510162818.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:19.076Z,1510162819.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:19.092Z,1510162819.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:19.457Z,1510162819.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:19.490Z,1510162819.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:19.852Z,1510162819.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:19.884Z,1510162819.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:20.263Z,1510162820.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:20.295Z,1510162820.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:20.674Z,1510162820.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:20.695Z,1510162820.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:21.078Z,1510162821.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:21.094Z,1510162821.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:21.456Z,1510162821.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:21.491Z,1510162821.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:21.855Z,1510162821.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:21.887Z,1510162821.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:22.279Z,1510162822.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:22.299Z,1510162822.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:22.673Z,1510162822.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:22.698Z,1510162822.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:23.076Z,1510162823.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:23.093Z,1510162823.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:23.452Z,1510162823.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:23.488Z,1510162823.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:23.855Z,1510162823.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:23.886Z,1510162823.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:24.272Z,1510162824.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:24.296Z,1510162824.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:24.670Z,1510162824.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:24.700Z,1510162824.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:25.077Z,1510162825.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:25.093Z,1510162825.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:25.456Z,1510162825.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:25.490Z,1510162825.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:25.855Z,1510162825.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:25.887Z,1510162825.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:26.273Z,1510162826.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:26.290Z,1510162826.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:26.677Z,1510162826.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:26.693Z,1510162826.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:27.073Z,1510162827.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:27.089Z,1510162827.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:27.456Z,1510162827.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:27.494Z,1510162827.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:27.855Z,1510162827.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:27.886Z,1510162827.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:28.264Z,1510162828.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:28.375Z,1510162828.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:28.665Z,1510162828.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:28.699Z,1510162828.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:29.076Z,1510162829.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:29.100Z,1510162829.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:29.451Z,1510162829.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:29.504Z,1510162829.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:29.855Z,1510162829.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:29.890Z,1510162829.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:30.266Z,1510162830.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:30.330Z,1510162830.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:30.677Z,1510162830.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:30.693Z,1510162830.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:31.066Z,1510162831.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:31.095Z,1510162831.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:31.456Z,1510162831.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:31.488Z,1510162831.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:31.855Z,1510162831.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:31.870Z,1510162831.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:32.262Z,1510162832.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:32.294Z,1510162832.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:32.669Z,1510162832.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:32.699Z,1510162832.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:33.065Z,1510162833.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:33.092Z,1510162833.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:33.456Z,1510162833.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:33.472Z,1510162833.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:33.859Z,1510162833.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:33.879Z,1510162833.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:34.269Z,1510162834.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:34.307Z,1510162834.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:34.666Z,1510162834.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:34.682Z,1510162834.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:35.070Z,1510162835.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:35.102Z,1510162835.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:35.459Z,1510162835.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:35.474Z,1510162835.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:35.859Z,1510162835.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:35.879Z,1510162835.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:36.270Z,1510162836.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:36.286Z,1510162836.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:36.669Z,1510162836.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:36.685Z,1510162836.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:37.062Z,1510162837.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:37.078Z,1510162837.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:37.454Z,1510162837.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:37.474Z,1510162837.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:37.858Z,1510162837.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:37.874Z,1510162837.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:38.266Z,1510162838.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:38.282Z,1510162838.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:38.669Z,1510162838.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:38.723Z,1510162838.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:39.069Z,1510162839.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:39.087Z,1510162839.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:39.459Z,1510162839.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:39.475Z,1510162839.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:39.861Z,1510162839.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:39.877Z,1510162839.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:40.270Z,1510162840.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:40.286Z,1510162840.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:40.666Z,1510162840.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:40.683Z,1510162840.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:41.067Z,1510162841.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:41.083Z,1510162841.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:41.458Z,1510162841.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:41.476Z,1510162841.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:41.860Z,1510162841.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:41.877Z,1510162841.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:42.266Z,1510162842.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:42.283Z,1510162842.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:42.669Z,1510162842.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:42.686Z,1510162842.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:43.066Z,1510162843.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:43.082Z,1510162843.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:43.460Z,1510162843.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:43.477Z,1510162843.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:43.860Z,1510162843.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:43.876Z,1510162843.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:44.262Z,1510162844.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:44.284Z,1510162844.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:44.669Z,1510162844.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:44.686Z,1510162844.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:45.068Z,1510162845.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:45.084Z,1510162845.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:45.461Z,1510162845.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:45.477Z,1510162845.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:45.860Z,1510162845.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:45.876Z,1510162845.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:46.265Z,1510162846.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:46.287Z,1510162846.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:46.670Z,1510162846.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:46.686Z,1510162846.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:47.066Z,1510162847.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:47.082Z,1510162847.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:47.462Z,1510162847.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:47.478Z,1510162847.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:47.857Z,1510162847.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:47.874Z,1510162847.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:48.266Z,1510162848.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:48.282Z,1510162848.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:48.670Z,1510162848.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:48.686Z,1510162848.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:49.066Z,1510162849.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:49.083Z,1510162849.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:49.460Z,1510162849.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:49.477Z,1510162849.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:49.860Z,1510162849.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:49.877Z,1510162849.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:50.266Z,1510162850.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:50.282Z,1510162850.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:50.674Z,1510162850.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:50.729Z,1510162850.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:51.073Z,1510162851.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:51.117Z,1510162851.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:54.139Z,1510162854.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:54.164Z,1510162854.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:54.283Z,1510162854.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:54.319Z,1510162854.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:54.704Z,1510162854.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:54.721Z,1510162854.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:55.098Z,1510162855.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:55.158Z,1510162855.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:55.490Z,1510162855.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:55.520Z,1510162855.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:55.879Z,1510162855.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:55.924Z,1510162855.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:56.279Z,1510162856.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:56.313Z,1510162856.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:56.680Z,1510162856.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:56.718Z,1510162856.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:57.075Z,1510162857.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:57.091Z,1510162857.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:57.486Z,1510162857.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:57.512Z,1510162857.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:57.900Z,1510162857.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:57.916Z,1510162857.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:58.289Z,1510162858.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:58.319Z,1510162858.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:58.677Z,1510162858.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:58.705Z,1510162858.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:59.079Z,1510162859.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:59.118Z,1510162859.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:59.481Z,1510162859.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:59.496Z,1510162859.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:40:59.880Z,1510162859.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:40:59.918Z,1510162859.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:00.291Z,1510162860.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:00.316Z,1510162860.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:00.690Z,1510162860.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:00.716Z,1510162860.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:01.087Z,1510162861.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:01.123Z,1510162861.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:01.479Z,1510162861.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:01.496Z,1510162861.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:01.879Z,1510162861.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:01.895Z,1510162861.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:02.275Z,1510162862.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:02.295Z,1510162862.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:02.680Z,1510162862.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:02.718Z,1510162862.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:03.082Z,1510162863.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:03.098Z,1510162863.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:03.494Z,1510162863.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:03.526Z,1510162863.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:03.894Z,1510162863.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:03.910Z,1510162863.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:04.293Z,1510162864.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:04.339Z,1510162864.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:04.687Z,1510162864.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:04.703Z,1510162864.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:05.086Z,1510162865.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:05.102Z,1510162865.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:05.483Z,1510162865.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:05.499Z,1510162865.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:05.883Z,1510162865.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:05.899Z,1510162865.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:06.294Z,1510162866.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:06.310Z,1510162866.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:06.693Z,1510162866.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:06.709Z,1510162866.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:07.087Z,1510162867.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:07.107Z,1510162867.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:07.487Z,1510162867.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:07.511Z,1510162867.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:07.875Z,1510162867.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:07.938Z,1510162867.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:08.276Z,1510162868.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:08.296Z,1510162868.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:08.680Z,1510162868.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:08.711Z,1510162868.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:09.079Z,1510162869.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:09.134Z,1510162869.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:09.490Z,1510162869.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:09.511Z,1510162869.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:09.894Z,1510162869.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:09.924Z,1510162869.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:10.289Z,1510162870.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:10.329Z,1510162870.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:10.681Z,1510162870.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:10.697Z,1510162870.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:11.082Z,1510162871.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:11.099Z,1510162871.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:11.481Z,1510162871.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:11.503Z,1510162871.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:11.882Z,1510162871.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:11.898Z,1510162871.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:12.286Z,1510162872.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:12.302Z,1510162872.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:12.693Z,1510162872.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:12.728Z,1510162872.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:13.094Z,1510162873.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:13.126Z,1510162873.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:13.482Z,1510162873.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:13.499Z,1510162873.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:13.880Z,1510162873.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:13.900Z,1510162873.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:14.285Z,1510162874.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:14.302Z,1510162874.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:14.690Z,1510162874.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:14.707Z,1510162874.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:15.082Z,1510162875.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:15.103Z,1510162875.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:15.494Z,1510162875.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:15.510Z,1510162875.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:15.894Z,1510162875.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:15.970Z,1510162875.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:16.297Z,1510162876.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:16.345Z,1510162876.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:16.675Z,1510162876.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:16.710Z,1510162876.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:17.079Z,1510162877.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:17.143Z,1510162877.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:17.480Z,1510162877.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:17.505Z,1510162877.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:17.879Z,1510162877.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:17.948Z,1510162877.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:18.297Z,1510162878.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:18.313Z,1510162878.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:18.701Z,1510162878.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:18.716Z,1510162878.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:19.094Z,1510162879.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:19.115Z,1510162879.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:19.490Z,1510162879.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:19.506Z,1510162879.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:19.889Z,1510162879.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:19.905Z,1510162879.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:20.276Z,1510162880.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:20.314Z,1510162880.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:20.680Z,1510162880.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:20.705Z,1510162880.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:21.080Z,1510162881.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:21.106Z,1510162881.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:21.497Z,1510162881.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:21.513Z,1510162881.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:21.901Z,1510162881.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:21.917Z,1510162881.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:22.295Z,1510162882.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:22.316Z,1510162882.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:22.675Z,1510162882.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:22.707Z,1510162882.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:23.079Z,1510162883.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:23.111Z,1510162883.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:23.480Z,1510162883.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:23.515Z,1510162883.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:23.879Z,1510162883.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:23.912Z,1510162883.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:24.295Z,1510162884.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:24.313Z,1510162884.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:24.700Z,1510162884.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:24.720Z,1510162884.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:25.091Z,1510162885.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:25.107Z,1510162885.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:25.475Z,1510162885.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:25.500Z,1510162885.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:25.879Z,1510162885.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:25.905Z,1510162885.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:26.275Z,1510162886.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:26.332Z,1510162886.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:26.680Z,1510162886.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:26.714Z,1510162886.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:27.079Z,1510162887.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:27.108Z,1510162887.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:27.496Z,1510162887.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:27.512Z,1510162887.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:27.894Z,1510162887.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:27.915Z,1510162887.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:28.301Z,1510162888.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:28.317Z,1510162888.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:28.675Z,1510162888.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:28.706Z,1510162888.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:29.079Z,1510162889.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:29.111Z,1510162889.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:29.481Z,1510162889.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:29.513Z,1510162889.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:29.879Z,1510162889.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:29.916Z,1510162889.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:30.294Z,1510162890.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:30.315Z,1510162890.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:30.701Z,1510162890.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:30.717Z,1510162890.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:31.086Z,1510162891.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:31.117Z,1510162891.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:31.479Z,1510162891.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:31.514Z,1510162891.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:31.880Z,1510162891.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:31.911Z,1510162891.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:32.279Z,1510162892.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:32.315Z,1510162892.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:32.680Z,1510162892.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:32.715Z,1510162892.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:33.080Z,1510162893.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:33.114Z,1510162893.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:33.496Z,1510162893.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:33.512Z,1510162893.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:33.899Z,1510162893.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:33.916Z,1510162893.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:34.301Z,1510162894.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:34.317Z,1510162894.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:34.679Z,1510162894.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:34.712Z,1510162894.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:35.079Z,1510162895.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:35.114Z,1510162895.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:35.480Z,1510162895.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:35.515Z,1510162895.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:35.875Z,1510162895.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:35.909Z,1510162895.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:36.296Z,1510162896.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:36.312Z,1510162896.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:36.701Z,1510162896.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:36.717Z,1510162896.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:37.094Z,1510162897.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:37.115Z,1510162897.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:37.476Z,1510162897.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:37.513Z,1510162897.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:37.880Z,1510162897.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:37.950Z,1510162897.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:38.276Z,1510162898.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:38.378Z,1510162898.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:38.681Z,1510162898.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:38.715Z,1510162898.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:39.076Z,1510162899.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:39.127Z,1510162899.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:39.491Z,1510162899.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:39.522Z,1510162899.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:39.898Z,1510162899.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:39.959Z,1510162899.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:40.302Z,1510162900.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:40.318Z,1510162900.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:40.675Z,1510162900.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:40.692Z,1510162900.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:41.079Z,1510162901.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:41.120Z,1510162901.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:41.480Z,1510162901.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:41.496Z,1510162901.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:41.879Z,1510162901.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:41.899Z,1510162901.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:42.294Z,1510162902.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:42.330Z,1510162902.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:42.693Z,1510162902.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:42.729Z,1510162902.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:43.090Z,1510162903.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:43.106Z,1510162903.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:43.483Z,1510162903.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:43.499Z,1510162903.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:43.882Z,1510162903.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:43.903Z,1510162903.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:44.281Z,1510162904.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:44.297Z,1510162904.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:44.683Z,1510162904.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:44.699Z,1510162904.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:45.082Z,1510162905.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:45.097Z,1510162905.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:45.490Z,1510162905.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:45.507Z,1510162905.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:45.894Z,1510162905.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:45.910Z,1510162905.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:46.290Z,1510162906.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:46.311Z,1510162906.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:46.684Z,1510162906.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:46.701Z,1510162906.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:47.083Z,1510162907.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:47.104Z,1510162907.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:47.482Z,1510162907.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:47.504Z,1510162907.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:47.881Z,1510162907.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:47.897Z,1510162907.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:48.290Z,1510162908.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:48.342Z,1510162908.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:48.693Z,1510162908.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:48.709Z,1510162908.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:49.090Z,1510162909.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:49.106Z,1510162909.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:49.478Z,1510162909.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:49.502Z,1510162909.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:49.879Z,1510162909.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:49.901Z,1510162909.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:50.279Z,1510162910.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:50.300Z,1510162910.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:50.689Z,1510162910.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:50.706Z,1510162910.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:51.086Z,1510162911.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:51.107Z,1510162911.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:54.190Z,1510162914.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:54.255Z,1510162914.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:54.393Z,1510162914.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:54.435Z,1510162914.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:54.789Z,1510162914.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:54.811Z,1510162914.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:55.167Z,1510162915.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:55.200Z,1510162915.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:55.564Z,1510162915.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:55.592Z,1510162915.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:55.963Z,1510162915.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:55.989Z,1510162915.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:56.379Z,1510162916.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:56.398Z,1510162916.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:56.784Z,1510162916.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:56.800Z,1510162916.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:57.180Z,1510162917.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:57.199Z,1510162917.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:57.559Z,1510162917.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:57.588Z,1510162917.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:57.963Z,1510162917.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:58.002Z,1510162918.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:58.363Z,1510162918.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:58.394Z,1510162918.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:58.759Z,1510162918.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:58.794Z,1510162918.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:59.163Z,1510162919.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:59.194Z,1510162919.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:59.581Z,1510162919.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:41:59.599Z,1510162919.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:41:59.978Z,1510162919.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:00.044Z,1510162920.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:00.374Z,1510162920.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:00.403Z,1510162920.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:00.759Z,1510162920.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:00.800Z,1510162920.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:01.159Z,1510162921.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:01.212Z,1510162921.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:01.564Z,1510162921.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:01.596Z,1510162921.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:01.959Z,1510162921.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:02.008Z,1510162922.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:02.378Z,1510162922.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:02.411Z,1510162922.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:02.778Z,1510162922.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:02.809Z,1510162922.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:03.178Z,1510162923.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:03.207Z,1510162923.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:03.559Z,1510162923.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:03.576Z,1510162923.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:03.963Z,1510162923.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:03.980Z,1510162923.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:04.363Z,1510162924.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:04.379Z,1510162924.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:04.768Z,1510162924.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:04.788Z,1510162924.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:05.166Z,1510162925.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:05.183Z,1510162925.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:05.573Z,1510162925.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:05.589Z,1510162925.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:05.977Z,1510162925.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:05.994Z,1510162925.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:06.374Z,1510162926.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:06.390Z,1510162926.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:06.767Z,1510162926.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:06.783Z,1510162926.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:07.166Z,1510162927.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:07.182Z,1510162927.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:07.568Z,1510162927.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:07.589Z,1510162927.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:07.967Z,1510162927.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:07.983Z,1510162927.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:08.378Z,1510162928.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:08.394Z,1510162928.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:08.778Z,1510162928.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:08.800Z,1510162928.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:09.178Z,1510162929.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:09.195Z,1510162929.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:09.570Z,1510162929.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:09.591Z,1510162929.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:09.969Z,1510162929.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:09.985Z,1510162929.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:10.366Z,1510162930.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:10.425Z,1510162930.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:10.770Z,1510162930.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:10.787Z,1510162930.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:11.167Z,1510162931.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:11.188Z,1510162931.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:11.575Z,1510162931.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:11.596Z,1510162931.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:11.978Z,1510162931.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:11.995Z,1510162931.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:12.378Z,1510162932.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:12.395Z,1510162932.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:12.766Z,1510162932.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:12.782Z,1510162932.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:13.169Z,1510162933.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:13.191Z,1510162933.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:13.570Z,1510162933.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:13.586Z,1510162933.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:13.966Z,1510162933.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:13.981Z,1510162933.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:14.378Z,1510162934.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:14.394Z,1510162934.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:14.778Z,1510162934.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:14.794Z,1510162934.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:15.175Z,1510162935.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:15.190Z,1510162935.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:15.570Z,1510162935.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:15.586Z,1510162935.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:15.967Z,1510162935.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:15.987Z,1510162935.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:16.366Z,1510162936.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:16.381Z,1510162936.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:16.770Z,1510162936.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:16.786Z,1510162936.786 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:16.787Z,1510162936.787 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86
2017-11-08T17:42:16.787Z,1510162936.787 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T17:42:16.789Z,1510162936.789 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:16.789Z,1510162936.789 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86
2017-11-08T17:42:16.789Z,1510162936.789 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T17:42:16.790Z,1510162936.790 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:16.790Z,1510162936.790 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 86
2017-11-08T17:42:16.791Z,1510162936.791 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T17:42:16.866Z,1510162936.866 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T17:42:16.866Z,1510162936.866 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T17:42:16.866Z,1510162936.866 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T17:42:17.166Z,1510162937.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:17.273Z,1510162937.273 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T17:42:17.274Z,1510162937.274 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86
2017-11-08T17:42:17.274Z,1510162937.274 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T17:42:17.274Z,1510162937.274 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86
2017-11-08T17:42:17.275Z,1510162937.275 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T17:42:17.275Z,1510162937.275 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 86
2017-11-08T17:42:17.580Z,1510162937.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:17.595Z,1510162937.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T17:42:17.595Z,1510162937.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:42:17.596Z,1510162937.596 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:42:17.596Z,1510162937.596 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T17:42:17.597Z,1510162937.597 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:42:17.597Z,1510162937.597 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:42:17.597Z,1510162937.597 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T17:42:17.598Z,1510162937.598 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:42:17.598Z,1510162937.598 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:42:17.979Z,1510162937.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:17.995Z,1510162937.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T17:42:17.996Z,1510162937.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:18.379Z,1510162938.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:18.395Z,1510162938.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T17:42:18.396Z,1510162938.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:18.759Z,1510162938.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:18.790Z,1510162938.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T17:42:18.791Z,1510162938.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:19.164Z,1510162939.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:19.188Z,1510162939.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T17:42:19.189Z,1510162939.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:19.563Z,1510162939.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:19.587Z,1510162939.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T17:42:19.588Z,1510162939.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:19.963Z,1510162939.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:19.987Z,1510162939.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T17:42:19.988Z,1510162939.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:20.384Z,1510162940.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:20.405Z,1510162940.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T17:42:20.406Z,1510162940.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:20.784Z,1510162940.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:20.800Z,1510162940.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T17:42:20.801Z,1510162940.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:21.180Z,1510162941.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:21.216Z,1510162941.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T17:42:21.218Z,1510162941.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:21.564Z,1510162941.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:21.594Z,1510162941.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T17:42:21.595Z,1510162941.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:21.963Z,1510162941.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:21.993Z,1510162941.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T17:42:21.995Z,1510162941.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:22.363Z,1510162942.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:22.412Z,1510162942.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T17:42:22.413Z,1510162942.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:22.763Z,1510162942.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:22.793Z,1510162942.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T17:42:22.794Z,1510162942.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:23.163Z,1510162943.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:23.193Z,1510162943.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T17:42:23.194Z,1510162943.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:23.581Z,1510162943.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:23.620Z,1510162943.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T17:42:23.621Z,1510162943.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:23.982Z,1510162943.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:23.998Z,1510162943.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T17:42:23.999Z,1510162943.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:24.380Z,1510162944.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:24.441Z,1510162944.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-11-08T17:42:24.442Z,1510162944.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:24.763Z,1510162944.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:24.795Z,1510162944.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T17:42:24.796Z,1510162944.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:25.160Z,1510162945.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:25.184Z,1510162945.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T17:42:25.185Z,1510162945.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:25.564Z,1510162945.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:25.596Z,1510162945.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T17:42:25.597Z,1510162945.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:25.960Z,1510162945.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:25.975Z,1510162945.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T17:42:25.976Z,1510162945.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:26.370Z,1510162946.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:26.407Z,1510162946.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T17:42:26.409Z,1510162946.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:26.777Z,1510162946.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:26.808Z,1510162946.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T17:42:26.809Z,1510162946.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:27.178Z,1510162947.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:27.210Z,1510162947.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T17:42:27.212Z,1510162947.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:27.559Z,1510162947.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:27.583Z,1510162947.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T17:42:27.584Z,1510162947.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:27.966Z,1510162947.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:27.983Z,1510162947.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T17:42:27.984Z,1510162947.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:28.362Z,1510162948.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:28.380Z,1510162948.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T17:42:28.381Z,1510162948.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:28.765Z,1510162948.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:28.782Z,1510162948.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T17:42:28.783Z,1510162948.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:29.166Z,1510162949.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:29.183Z,1510162949.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T17:42:29.184Z,1510162949.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:29.573Z,1510162949.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:29.592Z,1510162949.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T17:42:29.593Z,1510162949.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:29.978Z,1510162949.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:29.994Z,1510162949.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T17:42:29.996Z,1510162949.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:30.381Z,1510162950.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:30.398Z,1510162950.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T17:42:30.399Z,1510162950.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:30.770Z,1510162950.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:30.786Z,1510162950.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T17:42:30.787Z,1510162950.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:31.163Z,1510162951.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:31.187Z,1510162951.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T17:42:31.188Z,1510162951.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:31.569Z,1510162951.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:31.603Z,1510162951.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T17:42:31.604Z,1510162951.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:31.960Z,1510162951.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:31.990Z,1510162951.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T17:42:31.991Z,1510162951.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:32.381Z,1510162952.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:32.397Z,1510162952.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T17:42:32.398Z,1510162952.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:32.784Z,1510162952.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:32.842Z,1510162952.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T17:42:32.843Z,1510162952.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:33.181Z,1510162953.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:33.212Z,1510162953.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T17:42:33.213Z,1510162953.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:33.563Z,1510162953.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:33.589Z,1510162953.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T17:42:33.590Z,1510162953.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:33.963Z,1510162953.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:33.997Z,1510162953.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T17:42:33.998Z,1510162953.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:34.363Z,1510162954.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:34.389Z,1510162954.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T17:42:34.390Z,1510162954.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:34.764Z,1510162954.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:34.789Z,1510162954.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T17:42:34.790Z,1510162954.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:35.163Z,1510162955.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:35.187Z,1510162955.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T17:42:35.188Z,1510162955.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:35.584Z,1510162955.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:35.600Z,1510162955.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T17:42:35.601Z,1510162955.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:35.984Z,1510162955.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:35.000Z,1510162956.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T17:42:36.001Z,1510162956.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:36.380Z,1510162956.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:36.397Z,1510162956.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T17:42:36.399Z,1510162956.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:36.759Z,1510162956.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:36.787Z,1510162956.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:37.159Z,1510162957.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:37.193Z,1510162957.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:37.564Z,1510162957.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:37.598Z,1510162957.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:37.959Z,1510162957.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:37.987Z,1510162957.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:38.370Z,1510162958.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:38.395Z,1510162958.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:38.784Z,1510162958.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:38.800Z,1510162958.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:39.173Z,1510162959.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:39.204Z,1510162959.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:39.563Z,1510162959.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:39.601Z,1510162959.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:39.963Z,1510162959.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:39.998Z,1510162959.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:40.363Z,1510162960.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:40.392Z,1510162960.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:40.764Z,1510162960.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:40.802Z,1510162960.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:41.163Z,1510162961.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:41.180Z,1510162961.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:41.578Z,1510162961.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:41.611Z,1510162961.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:41.978Z,1510162961.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:42.004Z,1510162962.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:42.374Z,1510162962.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:42.408Z,1510162962.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:42.763Z,1510162962.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:42.779Z,1510162962.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:43.167Z,1510162963.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:43.184Z,1510162963.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:43.567Z,1510162963.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:43.639Z,1510162963.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:43.970Z,1510162963.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:43.986Z,1510162963.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:44.378Z,1510162964.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:44.395Z,1510162964.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:44.778Z,1510162964.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:44.840Z,1510162964.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:45.180Z,1510162965.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:45.196Z,1510162965.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:45.564Z,1510162965.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:45.586Z,1510162965.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:45.970Z,1510162965.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:46.023Z,1510162966.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:46.370Z,1510162966.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:46.386Z,1510162966.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:46.762Z,1510162966.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:46.822Z,1510162966.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:47.169Z,1510162967.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:47.186Z,1510162967.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:47.579Z,1510162967.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:47.597Z,1510162967.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:47.978Z,1510162967.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:47.995Z,1510162967.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:48.378Z,1510162968.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:48.395Z,1510162968.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:48.766Z,1510162968.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:48.787Z,1510162968.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:49.162Z,1510162969.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:49.192Z,1510162969.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:49.570Z,1510162969.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:49.586Z,1510162969.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:49.970Z,1510162969.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:49.985Z,1510162969.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:50.376Z,1510162970.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:50.399Z,1510162970.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:50.781Z,1510162970.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:50.802Z,1510162970.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:51.179Z,1510162971.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:51.199Z,1510162971.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:54.255Z,1510162974.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:54.287Z,1510162974.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:54.399Z,1510162974.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:54.437Z,1510162974.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:54.517Z,1510162974.517 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T17:42:54.824Z,1510162974.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:54.882Z,1510162974.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:55.223Z,1510162975.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:55.244Z,1510162975.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:55.608Z,1510162975.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:55.640Z,1510162975.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:55.995Z,1510162975.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:56.037Z,1510162976.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:56.399Z,1510162976.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:56.441Z,1510162976.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:56.800Z,1510162976.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:56.820Z,1510162976.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:57.199Z,1510162977.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:57.217Z,1510162977.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:57.610Z,1510162977.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:57.643Z,1510162977.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:58.010Z,1510162978.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:58.041Z,1510162978.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:58.411Z,1510162978.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:58.441Z,1510162978.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:58.795Z,1510162978.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:58.814Z,1510162978.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:59.198Z,1510162979.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:59.294Z,1510162979.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:59.598Z,1510162979.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:42:59.615Z,1510162979.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:42:59.994Z,1510162979.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:00.015Z,1510162980.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:00.408Z,1510162980.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:00.441Z,1510162980.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:00.805Z,1510162980.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:00.851Z,1510162980.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:01.210Z,1510162981.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:01.245Z,1510162981.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:01.598Z,1510162981.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:01.619Z,1510162981.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:01.000Z,1510162982.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:02.017Z,1510162982.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:02.399Z,1510162982.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:02.444Z,1510162982.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:02.799Z,1510162982.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:02.818Z,1510162982.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:03.198Z,1510162983.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:03.218Z,1510162983.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:03.612Z,1510162983.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:03.649Z,1510162983.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:04.010Z,1510162984.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:04.052Z,1510162984.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:04.409Z,1510162984.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:04.448Z,1510162984.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:04.799Z,1510162984.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:04.819Z,1510162984.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:05.201Z,1510162985.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:05.263Z,1510162985.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:05.603Z,1510162985.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:05.641Z,1510162985.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:06.002Z,1510162986.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:06.026Z,1510162986.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:06.408Z,1510162986.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:06.426Z,1510162986.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:06.810Z,1510162986.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:06.831Z,1510162986.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:07.207Z,1510162987.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:07.246Z,1510162987.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:07.601Z,1510162987.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:07.621Z,1510162987.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:08.006Z,1510162988.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:08.024Z,1510162988.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:08.398Z,1510162988.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:08.421Z,1510162988.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:08.801Z,1510162988.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:08.848Z,1510162988.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:09.204Z,1510162989.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:09.224Z,1510162989.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:09.611Z,1510162989.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:09.628Z,1510162989.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:10.012Z,1510162990.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:10.020Z,1510162990.020 [BPC1](ERROR): Failed to receive battery data
2017-11-08T17:43:10.020Z,1510162990.020 [BPC1] Communications Fault, FailCount= 1
2017-11-08T17:43:10.020Z,1510162990.020 [BPC1](ERROR): Communications Fault
2017-11-08T17:43:10.030Z,1510162990.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:10.125Z,1510162990.125 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T17:43:10.411Z,1510162990.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:10.456Z,1510162990.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:10.794Z,1510162990.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:10.837Z,1510162990.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:11.202Z,1510162991.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:11.223Z,1510162991.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:11.301Z,1510162991.301 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T17:43:11.301Z,1510162991.301 [BPC1] No Fault, FailCount= 1
2017-11-08T17:43:11.591Z,1510162991.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:11.668Z,1510162991.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:12.005Z,1510162992.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:12.040Z,1510162992.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:12.416Z,1510162992.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:12.436Z,1510162992.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:12.818Z,1510162992.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:12.835Z,1510162992.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:13.215Z,1510162993.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:13.232Z,1510162993.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:13.599Z,1510162993.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:13.643Z,1510162993.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:14.003Z,1510162994.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:14.023Z,1510162994.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:14.402Z,1510162994.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:14.422Z,1510162994.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:14.801Z,1510162994.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:14.826Z,1510162994.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:15.191Z,1510162995.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:15.233Z,1510162995.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:15.607Z,1510162995.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:15.641Z,1510162995.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:16.017Z,1510162996.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:16.034Z,1510162996.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:16.414Z,1510162996.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:16.440Z,1510162996.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:16.791Z,1510162996.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:16.837Z,1510162996.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:17.195Z,1510162997.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:17.237Z,1510162997.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:17.592Z,1510162997.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:17.627Z,1510162997.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:17.996Z,1510162997.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:18.024Z,1510162998.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:18.412Z,1510162998.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:18.444Z,1510162998.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:18.818Z,1510162998.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:18.835Z,1510162998.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:19.208Z,1510162999.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:19.226Z,1510162999.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:19.596Z,1510162999.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:19.632Z,1510162999.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:19.991Z,1510162999.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:20.053Z,1510163000.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:20.396Z,1510163000.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:20.425Z,1510163000.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:20.796Z,1510163000.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:20.825Z,1510163000.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:21.191Z,1510163001.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:21.229Z,1510163001.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:21.615Z,1510163001.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:21.647Z,1510163001.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:22.016Z,1510163002.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:22.035Z,1510163002.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:22.415Z,1510163002.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:22.430Z,1510163002.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:22.791Z,1510163002.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:22.825Z,1510163002.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:23.195Z,1510163003.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:23.240Z,1510163003.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:23.596Z,1510163003.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:23.626Z,1510163003.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:23.995Z,1510163003.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:24.025Z,1510163004.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:24.406Z,1510163004.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:24.430Z,1510163004.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:24.812Z,1510163004.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:24.841Z,1510163004.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:25.208Z,1510163005.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:25.229Z,1510163005.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:25.595Z,1510163005.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:25.634Z,1510163005.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:25.992Z,1510163005.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:26.027Z,1510163006.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:26.396Z,1510163006.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:26.440Z,1510163006.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:26.797Z,1510163006.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:26.833Z,1510163006.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:27.195Z,1510163007.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:27.226Z,1510163007.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:27.614Z,1510163007.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:27.635Z,1510163007.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:28.017Z,1510163008.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:28.063Z,1510163008.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:28.419Z,1510163008.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:28.427Z,1510163008.427 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-08T17:43:28.465Z,1510163008.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:28.795Z,1510163008.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:28.825Z,1510163008.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:29.196Z,1510163009.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:29.232Z,1510163009.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:29.596Z,1510163009.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:29.623Z,1510163009.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:29.991Z,1510163009.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:30.030Z,1510163010.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:30.415Z,1510163010.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:30.455Z,1510163010.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:30.818Z,1510163010.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:30.840Z,1510163010.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:31.202Z,1510163011.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:31.234Z,1510163011.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:31.595Z,1510163011.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:31.648Z,1510163011.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:31.996Z,1510163011.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:32.032Z,1510163012.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:32.391Z,1510163012.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:32.443Z,1510163012.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:32.796Z,1510163012.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:32.834Z,1510163012.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:33.195Z,1510163013.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:33.212Z,1510163013.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:33.602Z,1510163013.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:33.638Z,1510163013.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:34.014Z,1510163014.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:34.044Z,1510163014.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:34.414Z,1510163014.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:34.447Z,1510163014.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:34.792Z,1510163014.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:34.809Z,1510163014.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:35.199Z,1510163015.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:35.244Z,1510163015.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:35.601Z,1510163015.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:35.618Z,1510163015.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:35.998Z,1510163015.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:36.043Z,1510163016.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:36.410Z,1510163016.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:36.444Z,1510163016.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:36.812Z,1510163016.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:36.849Z,1510163016.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:37.208Z,1510163017.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:37.224Z,1510163017.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:37.598Z,1510163017.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:37.643Z,1510163017.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:37.998Z,1510163017.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:38.015Z,1510163018.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:38.398Z,1510163018.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:38.418Z,1510163018.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:38.800Z,1510163018.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:38.818Z,1510163018.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:39.198Z,1510163019.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:39.244Z,1510163019.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:39.602Z,1510163019.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:39.622Z,1510163019.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:40.011Z,1510163020.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:40.044Z,1510163020.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:40.411Z,1510163020.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:40.451Z,1510163020.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:40.798Z,1510163020.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:40.855Z,1510163020.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:41.198Z,1510163021.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:41.226Z,1510163021.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:41.600Z,1510163021.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:41.620Z,1510163021.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:41.000Z,1510163022.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:42.018Z,1510163022.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:42.410Z,1510163022.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:42.450Z,1510163022.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:42.809Z,1510163022.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:42.850Z,1510163022.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:43.208Z,1510163023.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:43.226Z,1510163023.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:43.602Z,1510163023.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:43.626Z,1510163023.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:44.001Z,1510163024.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:44.047Z,1510163024.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:44.401Z,1510163024.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:44.420Z,1510163024.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:44.802Z,1510163024.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:44.822Z,1510163024.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:45.203Z,1510163025.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:45.219Z,1510163025.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:45.606Z,1510163025.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:45.647Z,1510163025.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:46.009Z,1510163026.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:46.029Z,1510163026.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:46.412Z,1510163026.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:46.429Z,1510163026.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:46.799Z,1510163026.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:46.817Z,1510163026.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:47.202Z,1510163027.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:47.253Z,1510163027.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:47.604Z,1510163027.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:47.624Z,1510163027.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:47.995Z,1510163027.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:48.028Z,1510163028.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:48.408Z,1510163028.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:48.424Z,1510163028.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:48.806Z,1510163028.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:48.847Z,1510163028.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:49.207Z,1510163029.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:49.227Z,1510163029.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:49.601Z,1510163029.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:49.621Z,1510163029.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:50.002Z,1510163030.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:50.019Z,1510163030.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:50.395Z,1510163030.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:50.445Z,1510163030.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:50.803Z,1510163030.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:50.825Z,1510163030.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:51.202Z,1510163031.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:51.223Z,1510163031.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:54.294Z,1510163034.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:54.379Z,1510163034.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:54.514Z,1510163034.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:54.530Z,1510163034.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:54.914Z,1510163034.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:54.930Z,1510163034.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:55.302Z,1510163035.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:55.363Z,1510163035.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:55.702Z,1510163035.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:55.719Z,1510163035.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:56.102Z,1510163036.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:56.159Z,1510163036.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:56.511Z,1510163036.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:56.531Z,1510163036.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:56.911Z,1510163036.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:56.931Z,1510163036.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:57.312Z,1510163037.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:57.328Z,1510163037.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:57.694Z,1510163037.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:57.726Z,1510163037.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:58.095Z,1510163038.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:58.119Z,1510163038.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:58.497Z,1510163038.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:58.519Z,1510163038.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:58.895Z,1510163038.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:58.917Z,1510163038.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:59.312Z,1510163039.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:59.335Z,1510163039.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:43:59.711Z,1510163039.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:43:59.727Z,1510163039.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:00.109Z,1510163040.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:00.125Z,1510163040.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:00.495Z,1510163040.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:00.519Z,1510163040.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:00.899Z,1510163040.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:00.916Z,1510163040.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:01.302Z,1510163041.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:01.318Z,1510163041.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:01.703Z,1510163041.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:01.720Z,1510163041.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:02.099Z,1510163042.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:02.119Z,1510163042.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:02.511Z,1510163042.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:02.528Z,1510163042.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:02.911Z,1510163042.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:02.932Z,1510163042.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:03.311Z,1510163043.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:03.331Z,1510163043.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:03.695Z,1510163043.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:03.717Z,1510163043.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:04.100Z,1510163044.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:04.117Z,1510163044.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:04.502Z,1510163044.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:04.554Z,1510163044.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:04.901Z,1510163044.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:04.918Z,1510163044.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:05.310Z,1510163045.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:05.327Z,1510163045.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:05.711Z,1510163045.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:05.732Z,1510163045.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:06.111Z,1510163046.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:06.132Z,1510163046.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:06.501Z,1510163046.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:06.517Z,1510163046.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:06.902Z,1510163046.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:06.918Z,1510163046.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:07.295Z,1510163047.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:07.316Z,1510163047.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:07.702Z,1510163047.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:07.718Z,1510163047.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:08.097Z,1510163048.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:08.119Z,1510163048.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:08.511Z,1510163048.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:08.527Z,1510163048.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:08.910Z,1510163048.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:08.927Z,1510163048.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:09.311Z,1510163049.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:09.331Z,1510163049.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:09.694Z,1510163049.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:09.725Z,1510163049.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:10.099Z,1510163050.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:10.128Z,1510163050.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:10.499Z,1510163050.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:10.515Z,1510163050.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:10.895Z,1510163050.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:10.925Z,1510163050.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:11.311Z,1510163051.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:11.328Z,1510163051.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:11.711Z,1510163051.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:11.728Z,1510163051.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:12.111Z,1510163052.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:12.127Z,1510163052.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:12.502Z,1510163052.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:12.519Z,1510163052.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:12.899Z,1510163052.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:12.919Z,1510163052.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:13.294Z,1510163053.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:13.327Z,1510163053.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:13.700Z,1510163053.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:13.722Z,1510163053.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:14.103Z,1510163054.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:14.118Z,1510163054.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:14.511Z,1510163054.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:14.532Z,1510163054.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:14.911Z,1510163054.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:14.982Z,1510163054.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:15.312Z,1510163055.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:15.328Z,1510163055.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:15.701Z,1510163055.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:15.718Z,1510163055.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:16.099Z,1510163056.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:16.121Z,1510163056.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:16.498Z,1510163056.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:16.519Z,1510163056.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:16.899Z,1510163056.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:16.923Z,1510163056.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:17.310Z,1510163057.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:17.326Z,1510163057.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:17.711Z,1510163057.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:17.731Z,1510163057.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:18.110Z,1510163058.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:18.131Z,1510163058.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:18.501Z,1510163058.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:18.517Z,1510163058.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:18.902Z,1510163058.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:18.917Z,1510163058.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:19.301Z,1510163059.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:19.317Z,1510163059.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:19.702Z,1510163059.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:19.710Z,1510163059.710 [BPC1](ERROR): Failed to receive battery data
2017-11-08T17:44:19.710Z,1510163059.710 [BPC1] Communications Fault, FailCount= 1
2017-11-08T17:44:19.710Z,1510163059.710 [BPC1](ERROR): Communications Fault
2017-11-08T17:44:19.719Z,1510163059.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:19.797Z,1510163059.797 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T17:44:20.091Z,1510163060.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:20.124Z,1510163060.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:20.515Z,1510163060.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:20.535Z,1510163060.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:20.914Z,1510163060.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:20.930Z,1510163060.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:21.005Z,1510163061.005 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T17:44:21.005Z,1510163061.005 [BPC1] No Fault, FailCount= 1
2017-11-08T17:44:21.312Z,1510163061.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:21.373Z,1510163061.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:21.701Z,1510163061.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:21.717Z,1510163061.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:22.099Z,1510163062.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:22.120Z,1510163062.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:22.492Z,1510163062.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:22.517Z,1510163062.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:22.901Z,1510163062.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:22.917Z,1510163062.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:23.311Z,1510163063.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:23.328Z,1510163063.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:23.712Z,1510163063.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:23.731Z,1510163063.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:24.115Z,1510163064.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:24.135Z,1510163064.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:24.499Z,1510163064.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:24.520Z,1510163064.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:24.902Z,1510163064.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:24.917Z,1510163064.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:25.301Z,1510163065.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:25.323Z,1510163065.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:25.699Z,1510163065.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:25.721Z,1510163065.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:26.102Z,1510163066.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:26.117Z,1510163066.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:26.515Z,1510163066.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:26.536Z,1510163066.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:26.914Z,1510163066.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:26.930Z,1510163066.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:27.311Z,1510163067.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:27.331Z,1510163067.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:27.702Z,1510163067.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:27.723Z,1510163067.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:28.101Z,1510163068.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:28.117Z,1510163068.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:28.492Z,1510163068.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:28.517Z,1510163068.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:28.899Z,1510163068.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:28.920Z,1510163068.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:29.311Z,1510163069.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:29.327Z,1510163069.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:29.712Z,1510163069.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:29.762Z,1510163069.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:30.111Z,1510163070.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:30.127Z,1510163070.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:30.499Z,1510163070.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:30.520Z,1510163070.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:30.902Z,1510163070.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:30.917Z,1510163070.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:31.302Z,1510163071.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:31.318Z,1510163071.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:31.699Z,1510163071.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:31.721Z,1510163071.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:32.101Z,1510163072.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:32.117Z,1510163072.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:32.515Z,1510163072.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:32.536Z,1510163072.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:32.914Z,1510163072.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:32.930Z,1510163072.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:33.316Z,1510163073.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:33.331Z,1510163073.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:33.702Z,1510163073.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:33.723Z,1510163073.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:34.099Z,1510163074.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:34.120Z,1510163074.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:34.504Z,1510163074.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:34.519Z,1510163074.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:34.902Z,1510163074.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:34.918Z,1510163074.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:35.312Z,1510163075.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:35.328Z,1510163075.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:35.713Z,1510163075.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:35.729Z,1510163075.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:36.114Z,1510163076.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:36.136Z,1510163076.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:36.499Z,1510163076.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:36.528Z,1510163076.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:36.893Z,1510163076.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:36.927Z,1510163076.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:37.293Z,1510163077.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:37.319Z,1510163077.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:37.705Z,1510163077.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:37.721Z,1510163077.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:38.092Z,1510163078.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:38.132Z,1510163078.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:38.510Z,1510163078.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:38.533Z,1510163078.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:38.914Z,1510163078.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:38.944Z,1510163078.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:39.318Z,1510163079.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:39.339Z,1510163079.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:39.695Z,1510163079.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:39.722Z,1510163079.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:40.095Z,1510163080.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:40.124Z,1510163080.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:40.492Z,1510163080.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:40.547Z,1510163080.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:40.895Z,1510163080.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:40.928Z,1510163080.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:41.311Z,1510163081.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:41.328Z,1510163081.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:41.712Z,1510163081.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:41.736Z,1510163081.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:42.108Z,1510163082.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:42.152Z,1510163082.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:42.495Z,1510163082.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:42.530Z,1510163082.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:42.895Z,1510163082.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:42.941Z,1510163082.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:43.295Z,1510163083.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:43.329Z,1510163083.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:43.696Z,1510163083.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:43.748Z,1510163083.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:44.095Z,1510163084.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:44.131Z,1510163084.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:44.502Z,1510163084.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:44.531Z,1510163084.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:44.916Z,1510163084.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:44.932Z,1510163084.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:45.305Z,1510163085.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:45.330Z,1510163085.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:45.691Z,1510163085.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:45.731Z,1510163085.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:46.099Z,1510163086.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:46.130Z,1510163086.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:46.496Z,1510163086.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:46.532Z,1510163086.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:46.895Z,1510163086.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:46.927Z,1510163086.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:47.306Z,1510163087.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:47.332Z,1510163087.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:47.709Z,1510163087.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:47.734Z,1510163087.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:48.106Z,1510163088.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:48.137Z,1510163088.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:48.495Z,1510163088.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:48.532Z,1510163088.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:48.891Z,1510163088.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:48.907Z,1510163088.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:49.291Z,1510163089.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:49.312Z,1510163089.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:49.696Z,1510163089.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:49.716Z,1510163089.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:50.099Z,1510163090.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:50.115Z,1510163090.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:50.506Z,1510163090.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:50.534Z,1510163090.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:50.909Z,1510163090.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:50.942Z,1510163090.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:51.309Z,1510163091.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:51.325Z,1510163091.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:54.383Z,1510163094.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:54.447Z,1510163094.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:54.451Z,1510163094.451 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T17:39:54.1Z
2017-11-08T17:44:54.451Z,1510163094.451 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T17:44:54.451Z,1510163094.451 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T17:44:54.564Z,1510163094.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:54.605Z,1510163094.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:55.254Z,1510163095.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:55.270Z,1510163095.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:55.425Z,1510163095.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:55.467Z,1510163095.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:55.818Z,1510163095.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:55.854Z,1510163095.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:56.207Z,1510163096.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:56.223Z,1510163096.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:59.295Z,1510163099.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:59.311Z,1510163099.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:59.394Z,1510163099.394 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171108T132236/Courier0052.lzma
2017-11-08T17:44:59.419Z,1510163099.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:59.467Z,1510163099.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:44:59.841Z,1510163099.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:44:59.857Z,1510163099.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:00.194Z,1510163100.194 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0052.lzma.bak
2017-11-08T17:45:00.195Z,1510163100.195 [DataOverHttps](INFO): SBD MOMSN=5223129
2017-11-08T17:45:00.262Z,1510163100.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:00.300Z,1510163100.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:01.189Z,1510163101.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:01.211Z,1510163101.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:01.347Z,1510163101.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:01.385Z,1510163101.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:01.751Z,1510163101.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:01.783Z,1510163101.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:04.858Z,1510163104.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:04.883Z,1510163104.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:04.998Z,1510163104.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:05.043Z,1510163105.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:05.424Z,1510163105.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:05.494Z,1510163105.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:05.835Z,1510163105.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:05.872Z,1510163105.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:06.228Z,1510163106.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:06.302Z,1510163106.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:06.607Z,1510163106.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:06.639Z,1510163106.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:07.007Z,1510163107.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:07.039Z,1510163107.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:10.090Z,1510163110.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:10.143Z,1510163110.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:10.229Z,1510163110.229 [DataOverHttps](INFO): Sending 219 bytes from file Logs/20171108T132236/Express0053.lzma
2017-11-08T17:45:10.255Z,1510163110.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:10.292Z,1510163110.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:10.670Z,1510163110.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:10.730Z,1510163110.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:11.029Z,1510163111.029 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0053.lzma.bak
2017-11-08T17:45:11.029Z,1510163111.029 [DataOverHttps](INFO): SBD MOMSN=5223131
2017-11-08T17:45:11.085Z,1510163111.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:11.101Z,1510163111.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:12.025Z,1510163112.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:12.044Z,1510163112.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:12.047Z,1510163112.047 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T17:45:12.047Z,1510163112.047 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T17:45:12.047Z,1510163112.047 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T17:45:12.155Z,1510163112.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:12.188Z,1510163112.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:15.260Z,1510163115.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:15.285Z,1510163115.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:15.400Z,1510163115.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:15.444Z,1510163115.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:15.824Z,1510163115.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:15.841Z,1510163115.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:16.227Z,1510163116.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:16.243Z,1510163116.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:16.614Z,1510163116.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:16.646Z,1510163116.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:17.003Z,1510163117.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:17.027Z,1510163117.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:17.404Z,1510163117.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:17.433Z,1510163117.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:17.803Z,1510163117.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:17.823Z,1510163117.823 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:17.824Z,1510163117.824 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87
2017-11-08T17:45:17.824Z,1510163117.824 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T17:45:17.842Z,1510163117.842 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:17.842Z,1510163117.842 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87
2017-11-08T17:45:17.842Z,1510163117.842 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T17:45:17.843Z,1510163117.843 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:17.844Z,1510163117.844 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 87
2017-11-08T17:45:17.844Z,1510163117.844 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T17:45:17.925Z,1510163117.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T17:45:17.925Z,1510163117.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T17:45:17.925Z,1510163117.925 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T17:45:18.218Z,1510163118.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:18.338Z,1510163118.338 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T17:45:18.338Z,1510163118.338 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87
2017-11-08T17:45:18.338Z,1510163118.338 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T17:45:18.338Z,1510163118.338 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87
2017-11-08T17:45:18.339Z,1510163118.339 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T17:45:18.339Z,1510163118.339 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 87
2017-11-08T17:45:18.622Z,1510163118.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:18.654Z,1510163118.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T17:45:18.654Z,1510163118.654 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:45:18.654Z,1510163118.654 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:45:18.655Z,1510163118.655 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T17:45:18.655Z,1510163118.655 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:45:18.655Z,1510163118.655 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:45:18.656Z,1510163118.656 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T17:45:18.656Z,1510163118.656 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:45:18.657Z,1510163118.657 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:45:19.010Z,1510163119.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:19.058Z,1510163119.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T17:45:19.059Z,1510163119.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:19.407Z,1510163119.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:19.427Z,1510163119.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T17:45:19.428Z,1510163119.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:19.807Z,1510163119.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:19.827Z,1510163119.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T17:45:19.828Z,1510163119.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:20.214Z,1510163120.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:20.230Z,1510163120.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T17:45:20.231Z,1510163120.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:20.621Z,1510163120.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:20.657Z,1510163120.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T17:45:20.658Z,1510163120.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:21.018Z,1510163121.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:21.033Z,1510163121.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T17:45:21.034Z,1510163121.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:21.409Z,1510163121.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:21.425Z,1510163121.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T17:45:21.426Z,1510163121.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:21.808Z,1510163121.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:21.833Z,1510163121.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T17:45:21.834Z,1510163121.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:22.212Z,1510163122.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:22.229Z,1510163122.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T17:45:22.230Z,1510163122.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:22.614Z,1510163122.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:22.630Z,1510163122.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T17:45:22.630Z,1510163122.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:23.017Z,1510163123.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:23.033Z,1510163123.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T17:45:23.034Z,1510163123.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:23.418Z,1510163123.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:23.433Z,1510163123.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T17:45:23.434Z,1510163123.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:23.806Z,1510163123.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:23.822Z,1510163123.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T17:45:23.823Z,1510163123.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:24.212Z,1510163124.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:24.365Z,1510163124.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-08T17:45:24.366Z,1510163124.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:24.612Z,1510163124.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:24.713Z,1510163124.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T17:45:24.714Z,1510163124.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:25.005Z,1510163125.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:25.071Z,1510163125.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T17:45:25.072Z,1510163125.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:25.417Z,1510163125.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:25.440Z,1510163125.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T17:45:25.441Z,1510163125.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:25.817Z,1510163125.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:25.847Z,1510163125.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T17:45:25.848Z,1510163125.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:26.218Z,1510163126.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:26.242Z,1510163126.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T17:45:26.243Z,1510163126.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:26.607Z,1510163126.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:26.647Z,1510163126.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T17:45:26.648Z,1510163126.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:27.009Z,1510163127.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:27.041Z,1510163127.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T17:45:27.045Z,1510163127.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:27.409Z,1510163127.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:27.424Z,1510163127.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T17:45:27.425Z,1510163127.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:27.806Z,1510163127.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:27.823Z,1510163127.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T17:45:27.824Z,1510163127.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:28.227Z,1510163128.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:28.243Z,1510163128.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T17:45:28.244Z,1510163128.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:28.625Z,1510163128.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:28.641Z,1510163128.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T17:45:28.642Z,1510163128.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:29.015Z,1510163129.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:29.035Z,1510163129.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T17:45:29.036Z,1510163129.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:29.399Z,1510163129.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:29.437Z,1510163129.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T17:45:29.438Z,1510163129.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:29.804Z,1510163129.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:29.861Z,1510163129.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T17:45:29.862Z,1510163129.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:30.199Z,1510163130.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:30.237Z,1510163130.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T17:45:30.238Z,1510163130.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:30.624Z,1510163130.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:30.641Z,1510163130.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T17:45:30.642Z,1510163130.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:31.024Z,1510163131.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:31.040Z,1510163131.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T17:45:31.042Z,1510163131.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:31.419Z,1510163131.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:31.477Z,1510163131.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T17:45:31.478Z,1510163131.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:31.799Z,1510163131.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:31.832Z,1510163131.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T17:45:31.833Z,1510163131.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:32.203Z,1510163132.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:32.238Z,1510163132.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T17:45:32.238Z,1510163132.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:32.604Z,1510163132.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:32.652Z,1510163132.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T17:45:32.654Z,1510163132.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:33.003Z,1510163133.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:33.028Z,1510163133.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T17:45:33.029Z,1510163133.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:33.424Z,1510163133.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:33.479Z,1510163133.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T17:45:33.480Z,1510163133.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:33.823Z,1510163133.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:33.843Z,1510163133.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T17:45:33.844Z,1510163133.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:34.220Z,1510163134.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:34.235Z,1510163134.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T17:45:34.236Z,1510163134.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:34.603Z,1510163134.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:34.635Z,1510163134.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T17:45:34.640Z,1510163134.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:35.003Z,1510163135.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:35.038Z,1510163135.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T17:45:35.039Z,1510163135.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:35.403Z,1510163135.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:35.434Z,1510163135.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T17:45:35.435Z,1510163135.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:35.803Z,1510163135.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:35.834Z,1510163135.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T17:45:35.835Z,1510163135.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:36.207Z,1510163136.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:36.239Z,1510163136.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T17:45:36.240Z,1510163136.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:36.621Z,1510163136.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:36.637Z,1510163136.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T17:45:36.637Z,1510163136.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:37.018Z,1510163137.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:37.040Z,1510163137.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T17:45:37.041Z,1510163137.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:37.418Z,1510163137.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:37.439Z,1510163137.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T17:45:37.440Z,1510163137.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:37.799Z,1510163137.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:37.827Z,1510163137.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:38.204Z,1510163138.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:38.232Z,1510163138.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:38.604Z,1510163138.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:38.619Z,1510163138.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:39.003Z,1510163139.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:39.019Z,1510163139.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:39.418Z,1510163139.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:39.448Z,1510163139.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:39.818Z,1510163139.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:39.851Z,1510163139.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:40.213Z,1510163140.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:40.240Z,1510163140.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:40.603Z,1510163140.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:40.643Z,1510163140.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:41.003Z,1510163141.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:41.023Z,1510163141.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:41.408Z,1510163141.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:41.423Z,1510163141.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:41.807Z,1510163141.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:41.863Z,1510163141.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:42.218Z,1510163142.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:42.244Z,1510163142.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:42.617Z,1510163142.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:42.646Z,1510163142.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:43.018Z,1510163143.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:43.044Z,1510163143.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:43.404Z,1510163143.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:43.449Z,1510163143.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:43.805Z,1510163143.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:43.820Z,1510163143.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:44.203Z,1510163144.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:44.243Z,1510163144.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:44.618Z,1510163144.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:44.650Z,1510163144.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:45.022Z,1510163145.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:45.048Z,1510163145.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:45.418Z,1510163145.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:45.451Z,1510163145.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:45.807Z,1510163145.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:45.828Z,1510163145.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:46.207Z,1510163146.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:46.223Z,1510163146.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:46.604Z,1510163146.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:46.621Z,1510163146.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:47.007Z,1510163147.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:47.023Z,1510163147.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:47.421Z,1510163147.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:47.450Z,1510163147.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:47.822Z,1510163147.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:47.875Z,1510163147.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:48.218Z,1510163148.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:48.248Z,1510163148.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:48.604Z,1510163148.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:48.619Z,1510163148.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:49.007Z,1510163149.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:49.027Z,1510163149.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:49.407Z,1510163149.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:49.427Z,1510163149.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:49.807Z,1510163149.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:49.823Z,1510163149.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:50.207Z,1510163150.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:50.223Z,1510163150.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:50.617Z,1510163150.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:50.647Z,1510163150.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:51.017Z,1510163151.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:51.049Z,1510163151.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:51.418Z,1510163151.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:51.449Z,1510163151.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:51.807Z,1510163151.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:51.827Z,1510163151.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:52.206Z,1510163152.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:52.222Z,1510163152.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:52.607Z,1510163152.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:52.627Z,1510163152.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:53.006Z,1510163153.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:53.023Z,1510163153.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:53.417Z,1510163153.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:53.449Z,1510163153.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:53.818Z,1510163153.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:53.873Z,1510163153.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:54.218Z,1510163154.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:54.248Z,1510163154.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:54.602Z,1510163154.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:54.648Z,1510163154.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:55.007Z,1510163155.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:55.027Z,1510163155.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:55.407Z,1510163155.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:55.464Z,1510163155.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:55.802Z,1510163155.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:55.818Z,1510163155.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:56.218Z,1510163156.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:56.248Z,1510163156.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:56.617Z,1510163156.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:56.649Z,1510163156.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:57.017Z,1510163157.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:57.048Z,1510163157.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:57.407Z,1510163157.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:57.427Z,1510163157.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:57.807Z,1510163157.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:57.823Z,1510163157.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:58.217Z,1510163158.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:58.249Z,1510163158.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:58.621Z,1510163158.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:58.652Z,1510163158.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:59.018Z,1510163159.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:59.048Z,1510163159.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:59.408Z,1510163159.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:59.424Z,1510163159.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:45:59.807Z,1510163159.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:45:59.827Z,1510163159.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:00.218Z,1510163160.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:00.249Z,1510163160.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:00.621Z,1510163160.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:00.647Z,1510163160.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:01.018Z,1510163161.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:01.048Z,1510163161.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:01.408Z,1510163161.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:01.424Z,1510163161.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:01.804Z,1510163161.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:01.819Z,1510163161.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:02.222Z,1510163162.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:02.246Z,1510163162.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:02.621Z,1510163162.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:02.646Z,1510163162.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:03.020Z,1510163163.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:03.046Z,1510163163.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:03.409Z,1510163163.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:03.425Z,1510163163.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:03.811Z,1510163163.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:03.867Z,1510163163.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:04.221Z,1510163164.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:04.247Z,1510163164.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:04.622Z,1510163164.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:04.647Z,1510163164.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:05.018Z,1510163165.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:05.049Z,1510163165.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:05.407Z,1510163165.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:05.423Z,1510163165.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:05.804Z,1510163165.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:05.827Z,1510163165.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:06.207Z,1510163166.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:06.251Z,1510163166.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:06.619Z,1510163166.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:06.650Z,1510163166.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:07.014Z,1510163167.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:07.049Z,1510163167.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:07.418Z,1510163167.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:07.449Z,1510163167.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:07.806Z,1510163167.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:07.823Z,1510163167.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:08.206Z,1510163168.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:08.223Z,1510163168.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:08.607Z,1510163168.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:08.627Z,1510163168.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:09.006Z,1510163169.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:09.022Z,1510163169.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:09.414Z,1510163169.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:09.430Z,1510163169.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:09.817Z,1510163169.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:09.858Z,1510163169.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:10.217Z,1510163170.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:10.259Z,1510163170.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:10.606Z,1510163170.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:10.623Z,1510163170.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:11.006Z,1510163171.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:11.023Z,1510163171.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:11.402Z,1510163171.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:11.442Z,1510163171.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:11.804Z,1510163171.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:11.824Z,1510163171.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:12.210Z,1510163172.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:12.227Z,1510163172.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:12.620Z,1510163172.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:12.654Z,1510163172.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:15.731Z,1510163175.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:15.756Z,1510163175.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:15.882Z,1510163175.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:15.995Z,1510163175.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:16.271Z,1510163176.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:16.304Z,1510163176.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:16.672Z,1510163176.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:16.705Z,1510163176.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:17.071Z,1510163177.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:17.131Z,1510163177.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:17.481Z,1510163177.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:17.514Z,1510163177.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:17.847Z,1510163177.847 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T17:46:17.847Z,1510163177.847 [NAL9602] Data Fault, FailCount= 5
2017-11-08T17:46:17.847Z,1510163177.847 [NAL9602](ERROR): Data Fault
2017-11-08T17:46:17.865Z,1510163177.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:17.937Z,1510163177.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:18.029Z,1510163178.029 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T17:46:18.029Z,1510163178.029 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-11-08T17:46:18.249Z,1510163178.249 [NAL9602](INFO): Powering down
2017-11-08T17:46:18.267Z,1510163178.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:18.287Z,1510163178.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:18.379Z,1510163178.379 [CBIT](INFO): Critical error at 20171108T174618
2017-11-08T17:46:18.671Z,1510163178.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:18.691Z,1510163178.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:19.066Z,1510163179.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:19.082Z,1510163179.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:19.469Z,1510163179.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:19.485Z,1510163179.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:19.865Z,1510163179.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:19.881Z,1510163179.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:20.267Z,1510163180.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:20.283Z,1510163180.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:20.669Z,1510163180.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:20.685Z,1510163180.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:21.064Z,1510163181.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:21.080Z,1510163181.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:21.467Z,1510163181.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:21.483Z,1510163181.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:21.869Z,1510163181.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:21.885Z,1510163181.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:22.269Z,1510163182.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:22.285Z,1510163182.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:22.665Z,1510163182.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:22.681Z,1510163182.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:23.069Z,1510163183.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:23.085Z,1510163183.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:23.465Z,1510163183.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:23.481Z,1510163183.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:23.865Z,1510163183.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:23.881Z,1510163183.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:24.269Z,1510163184.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:24.285Z,1510163184.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:24.666Z,1510163184.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:24.687Z,1510163184.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:25.066Z,1510163185.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:25.082Z,1510163185.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:25.470Z,1510163185.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:25.485Z,1510163185.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:25.866Z,1510163185.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:25.881Z,1510163185.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:26.267Z,1510163186.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:26.322Z,1510163186.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:26.666Z,1510163186.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:26.681Z,1510163186.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:27.066Z,1510163187.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:27.081Z,1510163187.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:27.470Z,1510163187.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:27.486Z,1510163187.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:27.870Z,1510163187.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:27.886Z,1510163187.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:28.270Z,1510163188.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:28.286Z,1510163188.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:28.666Z,1510163188.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:28.683Z,1510163188.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:29.070Z,1510163189.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:29.085Z,1510163189.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:29.466Z,1510163189.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:29.482Z,1510163189.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:29.866Z,1510163189.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:29.882Z,1510163189.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:30.270Z,1510163190.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:30.285Z,1510163190.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:30.665Z,1510163190.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:30.682Z,1510163190.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:31.069Z,1510163191.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:31.086Z,1510163191.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:31.469Z,1510163191.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:31.485Z,1510163191.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:31.865Z,1510163191.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:31.881Z,1510163191.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:32.265Z,1510163192.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:32.281Z,1510163192.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:32.670Z,1510163192.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:32.686Z,1510163192.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:33.065Z,1510163193.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:33.087Z,1510163193.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:33.469Z,1510163193.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:33.486Z,1510163193.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:33.870Z,1510163193.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:33.886Z,1510163193.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:34.265Z,1510163194.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:34.281Z,1510163194.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:34.666Z,1510163194.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:34.682Z,1510163194.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:35.070Z,1510163195.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:35.086Z,1510163195.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:35.465Z,1510163195.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:35.481Z,1510163195.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:35.869Z,1510163195.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:35.892Z,1510163195.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:36.270Z,1510163196.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:36.286Z,1510163196.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:36.669Z,1510163196.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:36.691Z,1510163196.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:37.069Z,1510163197.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:37.086Z,1510163197.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:37.470Z,1510163197.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:37.486Z,1510163197.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:37.865Z,1510163197.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:37.915Z,1510163197.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:38.268Z,1510163198.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:38.284Z,1510163198.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:38.672Z,1510163198.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:38.746Z,1510163198.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:39.067Z,1510163199.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:39.083Z,1510163199.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:39.468Z,1510163199.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:39.484Z,1510163199.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:39.872Z,1510163199.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:39.923Z,1510163199.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:40.268Z,1510163200.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:40.283Z,1510163200.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:40.667Z,1510163200.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:40.727Z,1510163200.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:41.068Z,1510163201.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:41.084Z,1510163201.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:41.467Z,1510163201.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:41.483Z,1510163201.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:41.868Z,1510163201.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:41.884Z,1510163201.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:42.267Z,1510163202.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:42.283Z,1510163202.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:42.668Z,1510163202.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:42.687Z,1510163202.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:43.071Z,1510163203.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:43.087Z,1510163203.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:43.467Z,1510163203.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:43.484Z,1510163203.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:43.868Z,1510163203.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:43.883Z,1510163203.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:44.268Z,1510163204.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:44.284Z,1510163204.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:44.667Z,1510163204.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:44.683Z,1510163204.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:45.068Z,1510163205.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:45.091Z,1510163205.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:45.469Z,1510163205.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:45.486Z,1510163205.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:45.869Z,1510163205.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:45.885Z,1510163205.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:46.268Z,1510163206.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:46.284Z,1510163206.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:46.669Z,1510163206.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:46.686Z,1510163206.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:47.067Z,1510163207.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:47.087Z,1510163207.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:47.468Z,1510163207.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:47.484Z,1510163207.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:47.869Z,1510163207.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:47.886Z,1510163207.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:48.273Z,1510163208.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:48.289Z,1510163208.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:48.672Z,1510163208.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:48.687Z,1510163208.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:49.071Z,1510163209.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:49.123Z,1510163209.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:49.207Z,1510163209.207 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:46:49.207Z,1510163209.207 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T17:46:49.354Z,1510163209.354 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:46:49.354Z,1510163209.354 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:46:49.354Z,1510163209.354 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:46:49.354Z,1510163209.354 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T17:46:49.354Z,1510163209.354 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:46:49.470Z,1510163209.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:49.486Z,1510163209.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:49.561Z,1510163209.561 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:46:49.757Z,1510163209.757 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:46:49.865Z,1510163209.865 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:46:49.881Z,1510163209.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:49.900Z,1510163209.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:50.274Z,1510163210.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:50.291Z,1510163210.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:50.669Z,1510163210.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:50.692Z,1510163210.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:51.071Z,1510163211.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:51.100Z,1510163211.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:51.197Z,1510163211.197 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:46:51.197Z,1510163211.197 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T17:46:51.467Z,1510163211.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:51.481Z,1510163211.481 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:46:51.481Z,1510163211.481 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:46:51.481Z,1510163211.481 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:46:51.481Z,1510163211.481 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T17:46:51.482Z,1510163211.482 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:46:51.487Z,1510163211.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:51.565Z,1510163211.565 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:46:51.872Z,1510163211.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:51.885Z,1510163211.885 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:46:51.962Z,1510163211.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:52.047Z,1510163212.047 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:46:52.267Z,1510163212.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:52.295Z,1510163212.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:52.663Z,1510163212.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:52.692Z,1510163212.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:53.062Z,1510163213.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:53.099Z,1510163213.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:53.466Z,1510163213.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:53.498Z,1510163213.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:53.585Z,1510163213.585 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:46:53.585Z,1510163213.585 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T17:46:53.665Z,1510163213.665 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:46:53.665Z,1510163213.665 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:46:53.665Z,1510163213.665 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:46:53.665Z,1510163213.665 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T17:46:53.666Z,1510163213.666 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:46:53.863Z,1510163213.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:53.887Z,1510163213.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:53.973Z,1510163213.973 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:46:54.069Z,1510163214.069 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:46:54.151Z,1510163214.151 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:46:54.266Z,1510163214.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:54.303Z,1510163214.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:54.667Z,1510163214.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:54.702Z,1510163214.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:55.067Z,1510163215.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:55.099Z,1510163215.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:55.462Z,1510163215.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:55.479Z,1510163215.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:55.577Z,1510163215.577 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:46:55.577Z,1510163215.577 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T17:46:55.765Z,1510163215.765 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:46:55.765Z,1510163215.765 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:46:55.765Z,1510163215.765 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:46:55.766Z,1510163215.766 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T17:46:55.766Z,1510163215.766 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:46:55.866Z,1510163215.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:55.908Z,1510163215.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:56.001Z,1510163216.001 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:46:56.169Z,1510163216.169 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:46:56.272Z,1510163216.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:56.310Z,1510163216.310 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:46:56.318Z,1510163216.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:56.669Z,1510163216.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:56.685Z,1510163216.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:57.071Z,1510163217.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:57.088Z,1510163217.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:57.467Z,1510163217.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:57.488Z,1510163217.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:57.585Z,1510163217.585 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:46:57.585Z,1510163217.585 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T17:46:57.869Z,1510163217.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:57.891Z,1510163217.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:57.925Z,1510163217.925 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:46:57.925Z,1510163217.925 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:46:57.925Z,1510163217.925 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:46:57.925Z,1510163217.925 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T17:46:57.926Z,1510163217.926 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:46:58.001Z,1510163218.001 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:46:58.001Z,1510163218.001 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:46:58.270Z,1510163218.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:58.287Z,1510163218.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:58.329Z,1510163218.329 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:46:58.451Z,1510163218.451 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:46:58.671Z,1510163218.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:58.690Z,1510163218.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:59.068Z,1510163219.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:59.085Z,1510163219.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:59.470Z,1510163219.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:59.487Z,1510163219.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:46:59.869Z,1510163219.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:46:59.892Z,1510163219.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:00.268Z,1510163220.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:00.292Z,1510163220.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:00.670Z,1510163220.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:00.727Z,1510163220.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:01.071Z,1510163221.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:01.139Z,1510163221.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:01.468Z,1510163221.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:01.484Z,1510163221.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:01.872Z,1510163221.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:01.927Z,1510163221.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:02.272Z,1510163222.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:02.289Z,1510163222.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:02.669Z,1510163222.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:02.724Z,1510163222.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:03.073Z,1510163223.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:03.089Z,1510163223.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:03.469Z,1510163223.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:03.486Z,1510163223.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:03.872Z,1510163223.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:03.888Z,1510163223.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:04.273Z,1510163224.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:04.289Z,1510163224.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:04.669Z,1510163224.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:04.685Z,1510163224.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:05.069Z,1510163225.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:05.091Z,1510163225.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:05.470Z,1510163225.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:05.491Z,1510163225.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:05.866Z,1510163225.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:05.888Z,1510163225.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:06.269Z,1510163226.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:06.285Z,1510163226.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:06.674Z,1510163226.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:06.690Z,1510163226.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:07.073Z,1510163227.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:07.090Z,1510163227.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:07.470Z,1510163227.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:07.488Z,1510163227.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:07.871Z,1510163227.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:07.893Z,1510163227.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:08.268Z,1510163228.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:08.286Z,1510163228.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:08.674Z,1510163228.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:08.695Z,1510163228.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:09.070Z,1510163229.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:09.092Z,1510163229.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:09.468Z,1510163229.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:09.485Z,1510163229.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:09.868Z,1510163229.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:09.884Z,1510163229.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:10.272Z,1510163230.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:10.289Z,1510163230.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:10.668Z,1510163230.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:10.684Z,1510163230.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:11.068Z,1510163231.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:11.124Z,1510163231.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:11.472Z,1510163231.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:11.496Z,1510163231.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:11.872Z,1510163231.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:11.888Z,1510163231.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:12.271Z,1510163232.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:12.291Z,1510163232.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:12.676Z,1510163232.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:12.693Z,1510163232.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:15.751Z,1510163235.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:15.783Z,1510163235.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:15.895Z,1510163235.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:15.931Z,1510163235.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:16.287Z,1510163236.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:16.318Z,1510163236.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:16.686Z,1510163236.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:16.702Z,1510163236.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:17.090Z,1510163237.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:17.105Z,1510163237.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:17.489Z,1510163237.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:17.511Z,1510163237.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:17.885Z,1510163237.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:17.902Z,1510163237.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:18.285Z,1510163238.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:18.307Z,1510163238.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:18.689Z,1510163238.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:18.706Z,1510163238.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:19.089Z,1510163239.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:19.106Z,1510163239.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:19.485Z,1510163239.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:19.507Z,1510163239.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:19.889Z,1510163239.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:19.906Z,1510163239.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:20.285Z,1510163240.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:20.307Z,1510163240.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:20.689Z,1510163240.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:20.705Z,1510163240.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:21.090Z,1510163241.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:21.106Z,1510163241.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:21.489Z,1510163241.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:21.505Z,1510163241.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:21.884Z,1510163241.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:21.907Z,1510163241.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:22.290Z,1510163242.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:22.306Z,1510163242.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:22.690Z,1510163242.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:22.759Z,1510163242.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:23.088Z,1510163243.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:23.137Z,1510163243.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:23.492Z,1510163243.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:23.508Z,1510163243.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:23.891Z,1510163243.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:23.951Z,1510163243.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:24.288Z,1510163244.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:24.311Z,1510163244.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:24.692Z,1510163244.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:24.747Z,1510163244.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:25.088Z,1510163245.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:25.104Z,1510163245.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:25.488Z,1510163245.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:25.504Z,1510163245.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:25.892Z,1510163245.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:25.909Z,1510163245.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:26.291Z,1510163246.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:26.307Z,1510163246.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:26.691Z,1510163246.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:26.707Z,1510163246.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:27.089Z,1510163247.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:27.105Z,1510163247.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:27.492Z,1510163247.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:27.508Z,1510163247.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:27.888Z,1510163247.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:27.904Z,1510163247.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:28.286Z,1510163248.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:28.314Z,1510163248.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:28.689Z,1510163248.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:28.705Z,1510163248.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:29.090Z,1510163249.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:29.105Z,1510163249.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:29.493Z,1510163249.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:29.509Z,1510163249.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:29.892Z,1510163249.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:29.909Z,1510163249.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:30.290Z,1510163250.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:30.306Z,1510163250.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:30.688Z,1510163250.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:30.709Z,1510163250.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:31.089Z,1510163251.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:31.106Z,1510163251.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:31.490Z,1510163251.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:31.506Z,1510163251.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:31.888Z,1510163251.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:31.905Z,1510163251.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:32.289Z,1510163252.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:32.306Z,1510163252.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:32.689Z,1510163252.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:32.705Z,1510163252.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:33.087Z,1510163253.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:33.143Z,1510163253.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:33.491Z,1510163253.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:33.509Z,1510163253.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:33.888Z,1510163253.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:33.912Z,1510163253.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:34.288Z,1510163254.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:34.308Z,1510163254.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:34.687Z,1510163254.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:34.703Z,1510163254.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:35.088Z,1510163255.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:35.112Z,1510163255.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:35.487Z,1510163255.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:35.507Z,1510163255.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:35.887Z,1510163255.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:35.903Z,1510163255.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:36.291Z,1510163256.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:36.307Z,1510163256.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:36.688Z,1510163256.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:36.704Z,1510163256.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:37.088Z,1510163257.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:37.105Z,1510163257.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:37.488Z,1510163257.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:37.504Z,1510163257.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:37.887Z,1510163257.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:37.907Z,1510163257.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:38.288Z,1510163258.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:38.304Z,1510163258.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:38.688Z,1510163258.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:38.704Z,1510163258.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:39.088Z,1510163259.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:39.104Z,1510163259.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:39.488Z,1510163259.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:39.504Z,1510163259.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:39.887Z,1510163259.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:39.903Z,1510163259.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:40.288Z,1510163260.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:40.304Z,1510163260.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:40.691Z,1510163260.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:40.708Z,1510163260.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:41.084Z,1510163261.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:41.114Z,1510163261.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:41.488Z,1510163261.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:41.507Z,1510163261.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:41.887Z,1510163261.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:41.903Z,1510163261.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:42.291Z,1510163262.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:42.307Z,1510163262.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:42.688Z,1510163262.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:42.707Z,1510163262.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:43.088Z,1510163263.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:43.105Z,1510163263.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:43.488Z,1510163263.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:43.511Z,1510163263.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:43.887Z,1510163263.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:43.907Z,1510163263.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:44.287Z,1510163264.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:44.307Z,1510163264.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:44.689Z,1510163264.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:44.711Z,1510163264.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:45.088Z,1510163265.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:45.145Z,1510163265.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:45.488Z,1510163265.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:45.505Z,1510163265.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:45.887Z,1510163265.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:45.944Z,1510163265.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:46.287Z,1510163266.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:46.303Z,1510163266.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:46.689Z,1510163266.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:46.745Z,1510163266.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:47.089Z,1510163267.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:47.105Z,1510163267.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:47.489Z,1510163267.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:47.505Z,1510163267.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:47.893Z,1510163267.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:47.909Z,1510163267.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:48.289Z,1510163268.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:48.304Z,1510163268.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:48.688Z,1510163268.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:48.705Z,1510163268.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:49.092Z,1510163269.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:49.109Z,1510163269.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:49.488Z,1510163269.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:49.504Z,1510163269.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:49.888Z,1510163269.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:49.904Z,1510163269.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:50.292Z,1510163270.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:50.309Z,1510163270.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:50.688Z,1510163270.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:50.703Z,1510163270.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:51.092Z,1510163271.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:51.108Z,1510163271.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:51.492Z,1510163271.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:51.508Z,1510163271.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:51.886Z,1510163271.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:51.902Z,1510163271.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:52.288Z,1510163272.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:52.303Z,1510163272.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:52.691Z,1510163272.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:52.707Z,1510163272.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:53.088Z,1510163273.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:53.104Z,1510163273.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:53.492Z,1510163273.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:53.507Z,1510163273.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:53.892Z,1510163273.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:53.915Z,1510163273.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:54.288Z,1510163274.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:54.304Z,1510163274.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:54.692Z,1510163274.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:54.707Z,1510163274.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:55.092Z,1510163275.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:55.147Z,1510163275.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:55.492Z,1510163275.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:55.508Z,1510163275.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:55.888Z,1510163275.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:55.911Z,1510163275.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:56.292Z,1510163276.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:56.315Z,1510163276.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:56.688Z,1510163276.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:56.704Z,1510163276.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:57.088Z,1510163277.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:57.104Z,1510163277.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:57.492Z,1510163277.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:57.508Z,1510163277.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:57.886Z,1510163277.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:57.902Z,1510163277.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:58.292Z,1510163278.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:58.308Z,1510163278.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:58.692Z,1510163278.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:58.708Z,1510163278.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:59.088Z,1510163279.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:59.104Z,1510163279.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:59.492Z,1510163279.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:59.508Z,1510163279.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:47:59.893Z,1510163279.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:47:59.909Z,1510163279.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:00.288Z,1510163280.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:00.304Z,1510163280.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:00.688Z,1510163280.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:00.704Z,1510163280.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:01.091Z,1510163281.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:01.108Z,1510163281.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:01.488Z,1510163281.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:01.511Z,1510163281.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:01.887Z,1510163281.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:01.902Z,1510163281.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:02.292Z,1510163282.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:02.316Z,1510163282.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:02.688Z,1510163282.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:02.707Z,1510163282.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:03.086Z,1510163283.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:03.107Z,1510163283.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:03.492Z,1510163283.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:03.509Z,1510163283.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:03.887Z,1510163283.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:03.903Z,1510163283.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:04.286Z,1510163284.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:04.313Z,1510163284.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:04.693Z,1510163284.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:04.710Z,1510163284.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:05.088Z,1510163285.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:05.104Z,1510163285.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:05.493Z,1510163285.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:05.509Z,1510163285.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:05.893Z,1510163285.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:05.910Z,1510163285.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:06.292Z,1510163286.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:06.308Z,1510163286.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:06.690Z,1510163286.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:06.711Z,1510163286.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:07.121Z,1510163287.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:07.226Z,1510163287.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:07.493Z,1510163287.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:07.508Z,1510163287.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:07.897Z,1510163287.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:07.936Z,1510163287.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:08.297Z,1510163288.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:08.313Z,1510163288.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:08.683Z,1510163288.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:08.732Z,1510163288.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:09.083Z,1510163289.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:09.108Z,1510163289.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:09.498Z,1510163289.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:09.514Z,1510163289.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:09.894Z,1510163289.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:09.915Z,1510163289.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:10.283Z,1510163290.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:10.309Z,1510163290.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:10.683Z,1510163290.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:10.718Z,1510163290.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:11.094Z,1510163291.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:11.110Z,1510163291.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:11.494Z,1510163291.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:11.510Z,1510163291.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:11.882Z,1510163291.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:11.917Z,1510163291.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:12.296Z,1510163292.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:12.313Z,1510163292.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:12.692Z,1510163292.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:12.708Z,1510163292.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:15.768Z,1510163295.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:15.802Z,1510163295.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:15.927Z,1510163295.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:15.960Z,1510163295.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:16.322Z,1510163296.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:16.359Z,1510163296.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:16.721Z,1510163296.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:16.772Z,1510163296.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:17.122Z,1510163297.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:17.138Z,1510163297.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:17.517Z,1510163297.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:17.539Z,1510163297.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:17.922Z,1510163297.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:17.939Z,1510163297.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:18.049Z,1510163298.049 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T17:48:18.049Z,1510163298.049 [NAL9602] No Fault, FailCount= 5
2017-11-08T17:48:18.306Z,1510163298.306 [NAL9602](INFO): Powering up NAL9602
2017-11-08T17:48:18.328Z,1510163298.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:18.366Z,1510163298.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:18.724Z,1510163298.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:18.747Z,1510163298.747 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:18.747Z,1510163298.747 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88
2017-11-08T17:48:18.747Z,1510163298.747 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T17:48:18.749Z,1510163298.749 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:18.749Z,1510163298.749 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88
2017-11-08T17:48:18.749Z,1510163298.749 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T17:48:18.751Z,1510163298.751 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:18.751Z,1510163298.751 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 88
2017-11-08T17:48:18.751Z,1510163298.751 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T17:48:18.833Z,1510163298.833 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T17:48:18.833Z,1510163298.833 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T17:48:18.833Z,1510163298.833 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T17:48:19.124Z,1510163299.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:19.221Z,1510163299.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T17:48:19.221Z,1510163299.221 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88
2017-11-08T17:48:19.221Z,1510163299.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T17:48:19.222Z,1510163299.222 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88
2017-11-08T17:48:19.222Z,1510163299.222 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T17:48:19.222Z,1510163299.222 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 88
2017-11-08T17:48:19.528Z,1510163299.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:19.550Z,1510163299.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T17:48:19.551Z,1510163299.551 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:48:19.551Z,1510163299.551 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:48:19.551Z,1510163299.551 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T17:48:19.552Z,1510163299.552 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:48:19.552Z,1510163299.552 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:48:19.552Z,1510163299.552 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T17:48:19.553Z,1510163299.553 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:48:19.553Z,1510163299.553 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:48:19.923Z,1510163299.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:19.954Z,1510163299.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T17:48:19.955Z,1510163299.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:20.319Z,1510163300.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:20.354Z,1510163300.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T17:48:20.354Z,1510163300.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:20.722Z,1510163300.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:20.746Z,1510163300.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T17:48:20.747Z,1510163300.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:21.118Z,1510163301.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:21.152Z,1510163301.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T17:48:21.153Z,1510163301.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:21.518Z,1510163301.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:21.542Z,1510163301.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T17:48:21.543Z,1510163301.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:21.922Z,1510163301.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:21.959Z,1510163301.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T17:48:21.960Z,1510163301.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:22.319Z,1510163302.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:22.334Z,1510163302.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T17:48:22.335Z,1510163302.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:22.719Z,1510163302.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:22.734Z,1510163302.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T17:48:22.735Z,1510163302.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:23.119Z,1510163303.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:23.134Z,1510163303.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T17:48:23.135Z,1510163303.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:23.522Z,1510163303.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:23.538Z,1510163303.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T17:48:23.539Z,1510163303.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:23.918Z,1510163303.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:23.939Z,1510163303.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T17:48:23.940Z,1510163303.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:24.319Z,1510163304.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:24.339Z,1510163304.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T17:48:24.340Z,1510163304.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:24.723Z,1510163304.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:24.738Z,1510163304.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T17:48:24.739Z,1510163304.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:25.127Z,1510163305.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:25.143Z,1510163305.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T17:48:25.144Z,1510163305.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:25.526Z,1510163305.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:25.542Z,1510163305.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T17:48:25.543Z,1510163305.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:25.923Z,1510163305.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:25.938Z,1510163305.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T17:48:25.939Z,1510163305.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:26.327Z,1510163306.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:26.347Z,1510163306.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T17:48:26.348Z,1510163306.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:26.726Z,1510163306.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:26.742Z,1510163306.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T17:48:26.742Z,1510163306.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:27.122Z,1510163307.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:27.137Z,1510163307.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T17:48:27.138Z,1510163307.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:27.522Z,1510163307.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:27.538Z,1510163307.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T17:48:27.539Z,1510163307.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:27.926Z,1510163307.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:27.942Z,1510163307.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T17:48:27.942Z,1510163307.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:28.322Z,1510163308.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:28.338Z,1510163308.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T17:48:28.338Z,1510163308.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:28.722Z,1510163308.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:28.806Z,1510163308.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T17:48:28.807Z,1510163308.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:29.141Z,1510163309.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:29.178Z,1510163309.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T17:48:29.179Z,1510163309.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:29.510Z,1510163309.510 [NAL9602](INFO): NAL9602 initialized
2017-11-08T17:48:29.527Z,1510163309.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:29.547Z,1510163309.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T17:48:29.548Z,1510163309.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:29.925Z,1510163309.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:29.982Z,1510163309.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T17:48:29.983Z,1510163309.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:30.337Z,1510163310.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:30.352Z,1510163310.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T17:48:30.353Z,1510163310.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:30.734Z,1510163310.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:30.791Z,1510163310.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T17:48:30.792Z,1510163310.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:31.130Z,1510163311.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:31.145Z,1510163311.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T17:48:31.146Z,1510163311.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:31.529Z,1510163311.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:31.544Z,1510163311.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T17:48:31.545Z,1510163311.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:31.935Z,1510163311.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:31.950Z,1510163311.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T17:48:31.951Z,1510163311.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:32.334Z,1510163312.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:32.350Z,1510163312.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T17:48:32.351Z,1510163312.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:32.736Z,1510163312.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:32.752Z,1510163312.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T17:48:32.753Z,1510163312.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:33.129Z,1510163313.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:33.146Z,1510163313.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T17:48:33.147Z,1510163313.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:33.525Z,1510163313.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:33.541Z,1510163313.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T17:48:33.542Z,1510163313.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:33.937Z,1510163313.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:33.956Z,1510163313.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T17:48:33.978Z,1510163313.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:34.337Z,1510163314.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:34.354Z,1510163314.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T17:48:34.355Z,1510163314.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:34.730Z,1510163314.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:34.746Z,1510163314.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T17:48:34.747Z,1510163314.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:35.128Z,1510163315.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:35.155Z,1510163315.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T17:48:35.156Z,1510163315.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:35.525Z,1510163315.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:35.541Z,1510163315.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T17:48:35.542Z,1510163315.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:35.935Z,1510163315.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:35.951Z,1510163315.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T17:48:35.952Z,1510163315.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:36.338Z,1510163316.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:36.354Z,1510163316.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T17:48:36.355Z,1510163316.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:36.739Z,1510163316.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:36.755Z,1510163316.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T17:48:36.756Z,1510163316.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:37.120Z,1510163317.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:37.148Z,1510163317.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T17:48:37.153Z,1510163317.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:37.523Z,1510163317.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:37.549Z,1510163317.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T17:48:37.550Z,1510163317.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:37.939Z,1510163317.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:37.959Z,1510163317.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T17:48:37.960Z,1510163317.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:38.339Z,1510163318.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:38.355Z,1510163318.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T17:48:38.356Z,1510163318.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:38.743Z,1510163318.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:38.759Z,1510163318.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:39.120Z,1510163319.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:39.167Z,1510163319.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:39.519Z,1510163319.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:39.554Z,1510163319.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:39.944Z,1510163319.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:39.961Z,1510163319.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:40.339Z,1510163320.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:40.355Z,1510163320.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:40.739Z,1510163320.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:40.756Z,1510163320.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:41.124Z,1510163321.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:41.150Z,1510163321.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:41.519Z,1510163321.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:41.548Z,1510163321.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:41.929Z,1510163321.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:41.962Z,1510163321.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:42.343Z,1510163322.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:42.363Z,1510163322.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:42.740Z,1510163322.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:42.756Z,1510163322.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:43.124Z,1510163323.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:43.154Z,1510163323.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:43.524Z,1510163323.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:43.555Z,1510163323.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:43.940Z,1510163323.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:43.956Z,1510163323.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:44.342Z,1510163324.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:44.359Z,1510163324.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:44.741Z,1510163324.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:44.757Z,1510163324.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:45.120Z,1510163325.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:45.154Z,1510163325.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:45.523Z,1510163325.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:45.554Z,1510163325.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:45.945Z,1510163325.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:45.961Z,1510163325.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:46.344Z,1510163326.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:46.360Z,1510163326.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:46.740Z,1510163326.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:46.757Z,1510163326.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:47.124Z,1510163327.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:47.156Z,1510163327.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:47.523Z,1510163327.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:47.558Z,1510163327.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:47.933Z,1510163327.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:47.959Z,1510163327.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:48.345Z,1510163328.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:48.361Z,1510163328.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:48.734Z,1510163328.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:48.766Z,1510163328.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:49.120Z,1510163329.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:49.136Z,1510163329.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:49.524Z,1510163329.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:49.540Z,1510163329.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:49.934Z,1510163329.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:49.966Z,1510163329.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:50.337Z,1510163330.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:50.364Z,1510163330.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:50.738Z,1510163330.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:50.764Z,1510163330.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:51.128Z,1510163331.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:51.207Z,1510163331.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:51.527Z,1510163331.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:51.543Z,1510163331.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:51.938Z,1510163331.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:51.983Z,1510163331.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:52.341Z,1510163332.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:52.372Z,1510163332.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:52.737Z,1510163332.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:52.783Z,1510163332.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:53.125Z,1510163333.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:53.141Z,1510163333.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:53.528Z,1510163333.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:53.571Z,1510163333.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:53.934Z,1510163333.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:53.951Z,1510163333.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:54.334Z,1510163334.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:54.351Z,1510163334.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:54.738Z,1510163334.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:54.755Z,1510163334.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:55.129Z,1510163335.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:55.146Z,1510163335.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:55.526Z,1510163335.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:55.543Z,1510163335.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:55.938Z,1510163335.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:55.955Z,1510163335.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:56.337Z,1510163336.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:56.355Z,1510163336.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:56.736Z,1510163336.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:56.752Z,1510163336.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:57.129Z,1510163337.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:57.145Z,1510163337.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:57.525Z,1510163337.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:57.541Z,1510163337.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:57.932Z,1510163337.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:57.948Z,1510163337.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:58.337Z,1510163338.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:58.354Z,1510163338.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:58.730Z,1510163338.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:58.746Z,1510163338.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:59.126Z,1510163339.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:59.147Z,1510163339.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:59.528Z,1510163339.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:59.544Z,1510163339.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:48:59.930Z,1510163339.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:48:59.946Z,1510163339.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:00.334Z,1510163340.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:00.350Z,1510163340.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:00.738Z,1510163340.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:00.754Z,1510163340.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:01.125Z,1510163341.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:01.183Z,1510163341.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:01.526Z,1510163341.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:01.542Z,1510163341.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:01.938Z,1510163341.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:01.954Z,1510163341.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:02.334Z,1510163342.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:02.351Z,1510163342.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:02.735Z,1510163342.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:02.755Z,1510163342.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:03.130Z,1510163343.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:03.146Z,1510163343.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:03.525Z,1510163343.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:03.541Z,1510163343.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:03.935Z,1510163343.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:03.955Z,1510163343.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:04.334Z,1510163344.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:04.350Z,1510163344.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:04.734Z,1510163344.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:04.751Z,1510163344.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:05.126Z,1510163345.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:05.147Z,1510163345.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:05.527Z,1510163345.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:05.548Z,1510163345.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:05.935Z,1510163345.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:05.955Z,1510163345.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:06.335Z,1510163346.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:06.351Z,1510163346.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:06.738Z,1510163346.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:06.759Z,1510163346.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:07.126Z,1510163347.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:07.142Z,1510163347.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:07.526Z,1510163347.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:07.547Z,1510163347.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:07.938Z,1510163347.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:07.954Z,1510163347.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:08.334Z,1510163348.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:08.356Z,1510163348.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:08.735Z,1510163348.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:08.755Z,1510163348.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:09.131Z,1510163349.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:09.147Z,1510163349.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:09.527Z,1510163349.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:09.543Z,1510163349.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:09.936Z,1510163349.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:09.959Z,1510163349.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:10.338Z,1510163350.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:10.360Z,1510163350.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:10.735Z,1510163350.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:10.756Z,1510163350.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:11.132Z,1510163351.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:11.148Z,1510163351.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:11.529Z,1510163351.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:11.546Z,1510163351.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:11.934Z,1510163351.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:11.943Z,1510163351.943 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-08T17:49:11.943Z,1510163351.943 [BPC1] Data Fault, FailCount= 1
2017-11-08T17:49:11.943Z,1510163351.943 [BPC1](ERROR): Data Fault
2017-11-08T17:49:11.960Z,1510163351.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:12.070Z,1510163352.070 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T17:49:12.337Z,1510163352.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:12.359Z,1510163352.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:12.738Z,1510163352.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:12.755Z,1510163352.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:15.811Z,1510163355.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:15.837Z,1510163355.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:15.918Z,1510163355.918 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T17:49:15.918Z,1510163355.918 [BPC1] No Fault, FailCount= 1
2017-11-08T17:49:15.951Z,1510163355.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:16.051Z,1510163356.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:16.372Z,1510163356.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:16.389Z,1510163356.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:16.773Z,1510163356.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:16.790Z,1510163356.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:17.171Z,1510163357.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:17.188Z,1510163357.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:17.551Z,1510163357.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:17.586Z,1510163357.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:17.951Z,1510163357.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:17.984Z,1510163357.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:18.348Z,1510163358.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:18.388Z,1510163358.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:18.751Z,1510163358.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:18.772Z,1510163358.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:19.169Z,1510163359.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:19.197Z,1510163359.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:19.565Z,1510163359.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:19.604Z,1510163359.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:19.966Z,1510163359.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:19.994Z,1510163359.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:20.354Z,1510163360.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:20.370Z,1510163360.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:20.753Z,1510163360.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:20.769Z,1510163360.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:21.156Z,1510163361.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:21.173Z,1510163361.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:21.553Z,1510163361.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:21.570Z,1510163361.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:21.962Z,1510163361.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:21.982Z,1510163361.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:22.370Z,1510163362.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:22.386Z,1510163362.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:22.768Z,1510163362.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:22.784Z,1510163362.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:23.147Z,1510163363.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:23.182Z,1510163363.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:23.555Z,1510163363.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:23.576Z,1510163363.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:23.947Z,1510163363.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:23.973Z,1510163363.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:24.358Z,1510163364.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:24.418Z,1510163364.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:24.757Z,1510163364.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:24.773Z,1510163364.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:25.168Z,1510163365.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:25.184Z,1510163365.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:25.566Z,1510163365.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:25.588Z,1510163365.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:25.967Z,1510163365.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:25.983Z,1510163365.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:26.358Z,1510163366.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:26.375Z,1510163366.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:26.747Z,1510163366.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:26.780Z,1510163366.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:27.158Z,1510163367.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:27.179Z,1510163367.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:27.554Z,1510163367.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:27.570Z,1510163367.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:27.962Z,1510163367.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:27.978Z,1510163367.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:28.365Z,1510163368.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:28.382Z,1510163368.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:28.761Z,1510163368.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:28.784Z,1510163368.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:29.156Z,1510163369.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:29.179Z,1510163369.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:29.555Z,1510163369.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:29.576Z,1510163369.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:29.954Z,1510163369.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:29.970Z,1510163369.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:30.355Z,1510163370.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:30.372Z,1510163370.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:30.757Z,1510163370.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:30.773Z,1510163370.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:31.164Z,1510163371.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:31.181Z,1510163371.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:31.561Z,1510163371.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:31.578Z,1510163371.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:31.962Z,1510163371.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:31.978Z,1510163371.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:32.355Z,1510163372.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:32.372Z,1510163372.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:32.758Z,1510163372.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:32.774Z,1510163372.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:33.160Z,1510163373.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:33.176Z,1510163373.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:33.559Z,1510163373.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:33.575Z,1510163373.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:33.966Z,1510163373.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:33.982Z,1510163373.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:34.369Z,1510163374.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:34.386Z,1510163374.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:34.764Z,1510163374.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:34.780Z,1510163374.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:35.153Z,1510163375.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:35.178Z,1510163375.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:35.559Z,1510163375.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:35.575Z,1510163375.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:35.952Z,1510163375.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:35.975Z,1510163375.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:36.355Z,1510163376.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:36.422Z,1510163376.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:36.758Z,1510163376.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:36.800Z,1510163376.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:37.169Z,1510163377.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:37.186Z,1510163377.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:37.568Z,1510163377.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:37.586Z,1510163377.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:37.963Z,1510163377.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:38.027Z,1510163378.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:38.351Z,1510163378.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:38.378Z,1510163378.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:38.747Z,1510163378.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:38.821Z,1510163378.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:39.152Z,1510163379.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:39.184Z,1510163379.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:39.547Z,1510163379.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:39.584Z,1510163379.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:39.967Z,1510163379.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:39.983Z,1510163379.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:40.371Z,1510163380.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:40.387Z,1510163380.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:40.768Z,1510163380.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:40.784Z,1510163380.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:41.147Z,1510163381.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:41.179Z,1510163381.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:41.551Z,1510163381.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:41.579Z,1510163381.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:41.951Z,1510163381.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:41.977Z,1510163381.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:42.352Z,1510163382.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:42.376Z,1510163382.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:42.751Z,1510163382.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:42.775Z,1510163382.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:43.167Z,1510163383.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:43.183Z,1510163383.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:43.567Z,1510163383.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:43.584Z,1510163383.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:43.967Z,1510163383.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:43.987Z,1510163383.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:44.347Z,1510163384.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:44.379Z,1510163384.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:44.751Z,1510163384.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:44.777Z,1510163384.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:45.152Z,1510163385.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:45.176Z,1510163385.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:45.547Z,1510163385.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:45.576Z,1510163385.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:45.965Z,1510163385.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:45.987Z,1510163385.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:46.371Z,1510163386.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:46.391Z,1510163386.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:46.768Z,1510163386.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:46.784Z,1510163386.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:47.147Z,1510163387.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:47.199Z,1510163387.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:47.551Z,1510163387.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:47.575Z,1510163387.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:47.947Z,1510163387.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:47.983Z,1510163387.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:48.347Z,1510163388.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:48.376Z,1510163388.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:48.751Z,1510163388.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:48.786Z,1510163388.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:49.169Z,1510163389.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:49.185Z,1510163389.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:49.571Z,1510163389.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:49.587Z,1510163389.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:49.957Z,1510163389.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:49.988Z,1510163389.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:50.347Z,1510163390.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:50.363Z,1510163390.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:50.747Z,1510163390.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:50.767Z,1510163390.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:51.156Z,1510163391.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:51.171Z,1510163391.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:51.548Z,1510163391.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:51.564Z,1510163391.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:51.966Z,1510163391.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:51.990Z,1510163391.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:52.369Z,1510163392.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:52.400Z,1510163392.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:52.769Z,1510163392.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:52.795Z,1510163392.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:53.151Z,1510163393.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:53.171Z,1510163393.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:53.552Z,1510163393.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:53.575Z,1510163393.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:53.956Z,1510163393.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:53.973Z,1510163393.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:54.351Z,1510163394.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:54.368Z,1510163394.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:54.752Z,1510163394.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:54.775Z,1510163394.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:55.166Z,1510163395.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:55.199Z,1510163395.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:55.562Z,1510163395.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:55.579Z,1510163395.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:55.965Z,1510163395.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:56.010Z,1510163396.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:56.357Z,1510163396.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:56.374Z,1510163396.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:56.753Z,1510163396.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:56.770Z,1510163396.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:57.156Z,1510163397.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:57.172Z,1510163397.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:57.557Z,1510163397.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:57.574Z,1510163397.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:57.962Z,1510163397.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:57.978Z,1510163397.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:58.365Z,1510163398.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:58.387Z,1510163398.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:58.766Z,1510163398.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:58.827Z,1510163398.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:59.151Z,1510163399.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:59.222Z,1510163399.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:59.557Z,1510163399.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:49:59.573Z,1510163399.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:49:59.958Z,1510163399.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:00.016Z,1510163400.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:00.358Z,1510163400.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:00.380Z,1510163400.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:00.756Z,1510163400.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:00.809Z,1510163400.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:01.167Z,1510163401.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:01.188Z,1510163401.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:01.566Z,1510163401.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:01.582Z,1510163401.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:01.966Z,1510163401.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:01.982Z,1510163401.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:02.358Z,1510163402.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:02.375Z,1510163402.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:02.754Z,1510163402.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:02.770Z,1510163402.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:03.158Z,1510163403.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:03.173Z,1510163403.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:03.559Z,1510163403.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:03.575Z,1510163403.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:03.966Z,1510163403.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:03.982Z,1510163403.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:04.366Z,1510163404.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:04.382Z,1510163404.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:04.767Z,1510163404.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:04.788Z,1510163404.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:05.153Z,1510163405.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:05.170Z,1510163405.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:05.560Z,1510163405.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:05.577Z,1510163405.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:05.958Z,1510163405.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:05.975Z,1510163405.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:06.351Z,1510163406.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:06.373Z,1510163406.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:06.757Z,1510163406.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:06.773Z,1510163406.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:07.167Z,1510163407.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:07.184Z,1510163407.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:07.566Z,1510163407.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:07.582Z,1510163407.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:07.966Z,1510163407.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:07.987Z,1510163407.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:08.358Z,1510163408.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:08.374Z,1510163408.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:08.757Z,1510163408.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:08.780Z,1510163408.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:09.158Z,1510163409.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:09.208Z,1510163409.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:09.559Z,1510163409.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:09.575Z,1510163409.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:09.967Z,1510163409.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:09.984Z,1510163409.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:10.370Z,1510163410.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:10.391Z,1510163410.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:10.772Z,1510163410.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:10.799Z,1510163410.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:11.158Z,1510163411.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:11.174Z,1510163411.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:11.562Z,1510163411.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:11.578Z,1510163411.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:11.963Z,1510163411.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:11.979Z,1510163411.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:12.359Z,1510163412.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:12.379Z,1510163412.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:12.382Z,1510163412.382 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T17:50:12.382Z,1510163412.382 [Default:CheckIn:C.Wait] Stopped
2017-11-08T17:50:12.382Z,1510163412.382 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T17:50:12.382Z,1510163412.382 [Default:CheckIn:D] Running Loop=1
2017-11-08T17:50:12.763Z,1510163412.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:12.779Z,1510163412.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:12.782Z,1510163412.782 [Default:CheckIn:D] Stopped
2017-11-08T17:50:12.782Z,1510163412.782 [Default:CheckIn:E] Running Loop=1
2017-11-08T17:50:15.919Z,1510163415.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:15.935Z,1510163415.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:15.939Z,1510163415.939 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 263.530029 min 
2017-11-08T17:50:15.939Z,1510163415.939 [Default:CheckIn:E] Stopped
2017-11-08T17:50:15.939Z,1510163415.939 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T17:50:15.939Z,1510163415.939 [Default:CheckIn] Stopped
2017-11-08T17:50:15.939Z,1510163415.939 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T17:50:15.940Z,1510163415.940 [Default:CheckIn](INFO): Running loop #14
2017-11-08T17:50:15.940Z,1510163415.940 [Default:CheckIn] Running Loop=14
2017-11-08T17:50:15.940Z,1510163415.940 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T17:50:15.940Z,1510163415.940 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T17:50:16.061Z,1510163416.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:16.093Z,1510163416.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:16.458Z,1510163416.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:16.483Z,1510163416.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:16.846Z,1510163416.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:16.863Z,1510163416.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:17.248Z,1510163417.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:17.288Z,1510163417.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:17.649Z,1510163417.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:17.671Z,1510163417.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:18.066Z,1510163418.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:18.091Z,1510163418.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:18.461Z,1510163418.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:18.492Z,1510163418.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:18.861Z,1510163418.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:18.891Z,1510163418.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:19.250Z,1510163419.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:19.266Z,1510163419.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:19.651Z,1510163419.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:19.672Z,1510163419.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:20.048Z,1510163420.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:20.064Z,1510163420.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:20.448Z,1510163420.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:20.465Z,1510163420.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:20.852Z,1510163420.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:20.915Z,1510163420.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:21.261Z,1510163421.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:21.320Z,1510163421.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:21.658Z,1510163421.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:21.674Z,1510163421.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:22.054Z,1510163422.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:22.071Z,1510163422.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:22.452Z,1510163422.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:22.496Z,1510163422.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:22.851Z,1510163422.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:22.872Z,1510163422.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:23.248Z,1510163423.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:23.296Z,1510163423.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:23.654Z,1510163423.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:23.669Z,1510163423.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:24.058Z,1510163424.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:24.075Z,1510163424.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:24.462Z,1510163424.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:24.494Z,1510163424.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:24.854Z,1510163424.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:24.870Z,1510163424.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:25.249Z,1510163425.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:25.265Z,1510163425.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:25.650Z,1510163425.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:25.667Z,1510163425.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:26.049Z,1510163426.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:26.066Z,1510163426.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:26.446Z,1510163426.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:26.463Z,1510163426.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:26.848Z,1510163426.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:26.864Z,1510163426.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:27.257Z,1510163427.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:27.274Z,1510163427.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:27.653Z,1510163427.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:27.670Z,1510163427.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:28.058Z,1510163428.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:28.074Z,1510163428.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:28.447Z,1510163428.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:28.463Z,1510163428.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:28.848Z,1510163428.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:28.865Z,1510163428.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:29.251Z,1510163429.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:29.271Z,1510163429.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:29.648Z,1510163429.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:29.663Z,1510163429.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:30.058Z,1510163430.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:30.074Z,1510163430.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:30.466Z,1510163430.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:30.502Z,1510163430.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:30.857Z,1510163430.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:30.879Z,1510163430.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:31.250Z,1510163431.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:31.266Z,1510163431.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:31.647Z,1510163431.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:31.707Z,1510163431.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:32.053Z,1510163432.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:32.075Z,1510163432.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:32.454Z,1510163432.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:32.470Z,1510163432.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:32.849Z,1510163432.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:32.865Z,1510163432.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:33.254Z,1510163433.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:33.270Z,1510163433.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:33.657Z,1510163433.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:33.674Z,1510163433.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:34.058Z,1510163434.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:34.074Z,1510163434.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:34.448Z,1510163434.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:34.464Z,1510163434.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:34.846Z,1510163434.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:34.862Z,1510163434.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:35.253Z,1510163435.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:35.269Z,1510163435.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:35.651Z,1510163435.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:35.667Z,1510163435.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:36.055Z,1510163436.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:36.071Z,1510163436.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:36.458Z,1510163436.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:36.474Z,1510163436.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:36.857Z,1510163436.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:36.879Z,1510163436.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:37.253Z,1510163437.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:37.269Z,1510163437.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:37.649Z,1510163437.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:37.665Z,1510163437.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:38.049Z,1510163438.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:38.065Z,1510163438.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:38.453Z,1510163438.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:38.469Z,1510163438.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:38.853Z,1510163438.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:38.869Z,1510163438.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:39.254Z,1510163439.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:39.275Z,1510163439.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:39.661Z,1510163439.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:39.678Z,1510163439.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:40.058Z,1510163440.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:40.074Z,1510163440.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:40.453Z,1510163440.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:40.475Z,1510163440.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:40.851Z,1510163440.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:40.868Z,1510163440.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:41.251Z,1510163441.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:41.272Z,1510163441.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:41.653Z,1510163441.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:41.669Z,1510163441.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:42.062Z,1510163442.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:42.084Z,1510163442.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:42.459Z,1510163442.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:42.480Z,1510163442.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:42.859Z,1510163442.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:42.879Z,1510163442.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:43.252Z,1510163443.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:43.269Z,1510163443.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:43.648Z,1510163443.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:43.720Z,1510163443.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:44.043Z,1510163444.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:44.072Z,1510163444.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:44.440Z,1510163444.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:44.496Z,1510163444.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:44.854Z,1510163444.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:44.870Z,1510163444.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:45.263Z,1510163445.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:45.313Z,1510163445.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:45.664Z,1510163445.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:45.680Z,1510163445.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:46.063Z,1510163446.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:46.079Z,1510163446.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:46.454Z,1510163446.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:46.470Z,1510163446.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:46.841Z,1510163446.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:46.873Z,1510163446.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:47.240Z,1510163447.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:47.270Z,1510163447.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:47.643Z,1510163447.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:47.668Z,1510163447.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:48.060Z,1510163448.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:48.076Z,1510163448.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:48.464Z,1510163448.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:48.480Z,1510163448.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:48.861Z,1510163448.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:48.877Z,1510163448.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:49.239Z,1510163449.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:49.270Z,1510163449.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:49.648Z,1510163449.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:49.673Z,1510163449.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:50.047Z,1510163450.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:50.080Z,1510163450.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:50.440Z,1510163450.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:50.473Z,1510163450.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:50.847Z,1510163450.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:50.872Z,1510163450.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:51.263Z,1510163451.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:51.279Z,1510163451.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:51.668Z,1510163451.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:51.684Z,1510163451.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:52.063Z,1510163452.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:52.080Z,1510163452.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:52.443Z,1510163452.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:52.472Z,1510163452.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:52.845Z,1510163452.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:52.881Z,1510163452.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:53.244Z,1510163453.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:53.281Z,1510163453.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:53.643Z,1510163453.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:53.696Z,1510163453.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:54.058Z,1510163454.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:54.084Z,1510163454.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:54.468Z,1510163454.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:54.484Z,1510163454.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:54.858Z,1510163454.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:54.887Z,1510163454.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:55.243Z,1510163455.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:55.259Z,1510163455.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:55.643Z,1510163455.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:55.663Z,1510163455.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:56.048Z,1510163456.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:56.091Z,1510163456.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:56.448Z,1510163456.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:56.464Z,1510163456.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:56.846Z,1510163456.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:56.867Z,1510163456.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:57.254Z,1510163457.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:57.290Z,1510163457.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:57.661Z,1510163457.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:57.695Z,1510163457.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:58.062Z,1510163458.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:58.086Z,1510163458.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:58.447Z,1510163458.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:58.464Z,1510163458.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:58.843Z,1510163458.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:58.859Z,1510163458.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:59.250Z,1510163459.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:59.266Z,1510163459.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:50:59.648Z,1510163459.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:50:59.664Z,1510163459.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:00.057Z,1510163460.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:00.090Z,1510163460.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:00.454Z,1510163460.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:00.489Z,1510163460.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:00.862Z,1510163460.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:00.888Z,1510163460.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:01.249Z,1510163461.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:01.265Z,1510163461.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:01.643Z,1510163461.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:01.660Z,1510163461.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:02.047Z,1510163462.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:02.064Z,1510163462.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:02.449Z,1510163462.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:02.467Z,1510163462.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:02.847Z,1510163462.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:02.865Z,1510163462.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:03.258Z,1510163463.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:03.291Z,1510163463.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:03.658Z,1510163463.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:03.676Z,1510163463.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:04.062Z,1510163464.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:04.080Z,1510163464.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:04.452Z,1510163464.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:04.476Z,1510163464.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:04.846Z,1510163464.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:04.862Z,1510163464.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:05.246Z,1510163465.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:05.262Z,1510163465.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:05.653Z,1510163465.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:05.732Z,1510163465.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:06.060Z,1510163466.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:06.077Z,1510163466.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:06.458Z,1510163466.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:06.511Z,1510163466.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:06.859Z,1510163466.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:06.880Z,1510163466.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:07.254Z,1510163467.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:07.318Z,1510163467.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:07.649Z,1510163467.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:07.665Z,1510163467.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:08.049Z,1510163468.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:08.065Z,1510163468.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:08.447Z,1510163468.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:08.463Z,1510163468.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:08.850Z,1510163468.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:08.866Z,1510163468.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:09.258Z,1510163469.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:09.280Z,1510163469.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:09.659Z,1510163469.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:09.675Z,1510163469.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:10.058Z,1510163470.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:10.074Z,1510163470.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:10.450Z,1510163470.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:10.466Z,1510163470.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:10.850Z,1510163470.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:10.866Z,1510163470.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:11.243Z,1510163471.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:11.265Z,1510163471.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:11.649Z,1510163471.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:11.665Z,1510163471.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:12.059Z,1510163472.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:12.075Z,1510163472.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:12.458Z,1510163472.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:12.479Z,1510163472.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:12.858Z,1510163472.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:12.880Z,1510163472.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:15.924Z,1510163475.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:15.972Z,1510163475.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:16.087Z,1510163476.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:16.124Z,1510163476.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:16.504Z,1510163476.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:16.520Z,1510163476.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:16.903Z,1510163476.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:16.920Z,1510163476.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:17.300Z,1510163477.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:17.316Z,1510163477.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:17.683Z,1510163477.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:17.716Z,1510163477.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:18.080Z,1510163478.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:18.115Z,1510163478.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:18.479Z,1510163478.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:18.514Z,1510163478.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:18.897Z,1510163478.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:18.929Z,1510163478.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:19.301Z,1510163479.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:19.317Z,1510163479.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:19.700Z,1510163479.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:19.716Z,1510163479.716 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:19.717Z,1510163479.717 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89
2017-11-08T17:51:19.717Z,1510163479.717 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T17:51:19.718Z,1510163479.718 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:19.718Z,1510163479.718 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89
2017-11-08T17:51:19.719Z,1510163479.719 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T17:51:19.720Z,1510163479.720 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:19.720Z,1510163479.720 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 89
2017-11-08T17:51:19.720Z,1510163479.720 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T17:51:19.797Z,1510163479.797 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T17:51:19.797Z,1510163479.797 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T17:51:19.797Z,1510163479.797 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T17:51:20.084Z,1510163480.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:20.189Z,1510163480.189 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T17:51:20.189Z,1510163480.189 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89
2017-11-08T17:51:20.189Z,1510163480.189 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T17:51:20.189Z,1510163480.189 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89
2017-11-08T17:51:20.190Z,1510163480.190 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T17:51:20.190Z,1510163480.190 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 89
2017-11-08T17:51:20.479Z,1510163480.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:20.494Z,1510163480.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T17:51:20.495Z,1510163480.495 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:51:20.495Z,1510163480.495 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:51:20.495Z,1510163480.495 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T17:51:20.496Z,1510163480.496 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:51:20.496Z,1510163480.496 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:51:20.497Z,1510163480.497 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T17:51:20.497Z,1510163480.497 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:51:20.498Z,1510163480.498 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:51:20.897Z,1510163480.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:20.931Z,1510163480.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T17:51:20.932Z,1510163480.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:21.297Z,1510163481.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:21.331Z,1510163481.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T17:51:21.332Z,1510163481.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:21.697Z,1510163481.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:21.730Z,1510163481.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T17:51:21.730Z,1510163481.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:22.085Z,1510163482.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:22.101Z,1510163482.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T17:51:22.102Z,1510163482.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:22.486Z,1510163482.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:22.502Z,1510163482.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T17:51:22.503Z,1510163482.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:22.893Z,1510163482.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:22.910Z,1510163482.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T17:51:22.911Z,1510163482.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:23.294Z,1510163483.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:23.310Z,1510163483.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T17:51:23.310Z,1510163483.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:23.698Z,1510163483.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:23.735Z,1510163483.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T17:51:23.736Z,1510163483.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:24.091Z,1510163484.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:24.107Z,1510163484.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T17:51:24.108Z,1510163484.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:24.484Z,1510163484.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:24.504Z,1510163484.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T17:51:24.506Z,1510163484.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:24.895Z,1510163484.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:24.911Z,1510163484.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T17:51:24.912Z,1510163484.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:25.294Z,1510163485.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:25.311Z,1510163485.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T17:51:25.311Z,1510163485.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:25.695Z,1510163485.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:25.711Z,1510163485.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T17:51:25.711Z,1510163485.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:26.089Z,1510163486.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:26.106Z,1510163486.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T17:51:26.107Z,1510163486.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:26.486Z,1510163486.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:26.503Z,1510163486.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T17:51:26.504Z,1510163486.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:26.894Z,1510163486.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:26.915Z,1510163486.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T17:51:26.916Z,1510163486.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:27.298Z,1510163487.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:27.319Z,1510163487.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T17:51:27.320Z,1510163487.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:27.693Z,1510163487.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:27.710Z,1510163487.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T17:51:27.711Z,1510163487.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:28.088Z,1510163488.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:28.104Z,1510163488.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T17:51:28.105Z,1510163488.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:28.488Z,1510163488.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:28.546Z,1510163488.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T17:51:28.547Z,1510163488.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:28.890Z,1510163488.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:28.906Z,1510163488.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T17:51:28.907Z,1510163488.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:29.295Z,1510163489.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:29.315Z,1510163489.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T17:51:29.316Z,1510163489.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:29.698Z,1510163489.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:29.719Z,1510163489.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T17:51:29.720Z,1510163489.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:30.095Z,1510163490.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:30.111Z,1510163490.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T17:51:30.112Z,1510163490.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:30.483Z,1510163490.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:30.503Z,1510163490.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T17:51:30.505Z,1510163490.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:30.889Z,1510163490.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:30.905Z,1510163490.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T17:51:30.906Z,1510163490.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:31.286Z,1510163491.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:31.294Z,1510163491.294 [BPC1](ERROR): Failed to receive battery data
2017-11-08T17:51:31.294Z,1510163491.294 [BPC1] Communications Fault, FailCount= 1
2017-11-08T17:51:31.294Z,1510163491.294 [BPC1](ERROR): Communications Fault
2017-11-08T17:51:31.303Z,1510163491.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T17:51:31.304Z,1510163491.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:31.381Z,1510163491.381 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T17:51:31.682Z,1510163491.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:31.712Z,1510163491.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T17:51:31.713Z,1510163491.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:32.098Z,1510163492.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:32.119Z,1510163492.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T17:51:32.120Z,1510163492.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:32.499Z,1510163492.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:32.515Z,1510163492.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T17:51:32.515Z,1510163492.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:32.593Z,1510163492.593 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T17:51:32.593Z,1510163492.593 [BPC1] No Fault, FailCount= 1
2017-11-08T17:51:32.898Z,1510163492.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:32.971Z,1510163492.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T17:51:32.972Z,1510163492.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:33.287Z,1510163493.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:33.308Z,1510163493.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T17:51:33.309Z,1510163493.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:33.686Z,1510163493.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:33.702Z,1510163493.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T17:51:33.703Z,1510163493.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:34.090Z,1510163494.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:34.106Z,1510163494.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T17:51:34.107Z,1510163494.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:34.487Z,1510163494.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:34.508Z,1510163494.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T17:51:34.509Z,1510163494.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:34.899Z,1510163494.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:34.919Z,1510163494.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T17:51:34.920Z,1510163494.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:35.298Z,1510163495.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:35.319Z,1510163495.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T17:51:35.320Z,1510163495.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:35.698Z,1510163495.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:35.719Z,1510163495.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T17:51:35.720Z,1510163495.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:36.086Z,1510163496.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:36.102Z,1510163496.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T17:51:36.103Z,1510163496.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:36.483Z,1510163496.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:36.505Z,1510163496.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T17:51:36.506Z,1510163496.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:36.898Z,1510163496.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:36.919Z,1510163496.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T17:51:36.920Z,1510163496.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:37.299Z,1510163497.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:37.315Z,1510163497.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T17:51:37.316Z,1510163497.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:37.698Z,1510163497.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:37.719Z,1510163497.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T17:51:37.720Z,1510163497.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:38.089Z,1510163498.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:38.105Z,1510163498.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T17:51:38.106Z,1510163498.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:38.486Z,1510163498.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:38.502Z,1510163498.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T17:51:38.503Z,1510163498.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:38.898Z,1510163498.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:38.919Z,1510163498.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T17:51:38.920Z,1510163498.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:39.298Z,1510163499.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:39.319Z,1510163499.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T17:51:39.320Z,1510163499.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:39.699Z,1510163499.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:39.715Z,1510163499.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-08T17:51:39.716Z,1510163499.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:40.083Z,1510163500.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:40.106Z,1510163500.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:40.490Z,1510163500.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:40.506Z,1510163500.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:40.899Z,1510163500.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:40.916Z,1510163500.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:41.300Z,1510163501.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:41.352Z,1510163501.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:41.699Z,1510163501.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:41.720Z,1510163501.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:42.088Z,1510163502.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:42.104Z,1510163502.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:42.484Z,1510163502.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:42.507Z,1510163502.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:42.899Z,1510163502.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:42.920Z,1510163502.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:43.299Z,1510163503.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:43.323Z,1510163503.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:43.702Z,1510163503.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:43.718Z,1510163503.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:44.082Z,1510163504.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:44.106Z,1510163504.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:44.486Z,1510163504.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:44.508Z,1510163504.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:44.883Z,1510163504.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:44.908Z,1510163504.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:45.299Z,1510163505.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:45.316Z,1510163505.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:45.700Z,1510163505.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:45.716Z,1510163505.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:46.098Z,1510163506.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:46.116Z,1510163506.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:46.489Z,1510163506.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:46.506Z,1510163506.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:46.886Z,1510163506.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:46.903Z,1510163506.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:47.290Z,1510163507.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:47.308Z,1510163507.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:47.689Z,1510163507.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:47.705Z,1510163507.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:48.099Z,1510163508.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:48.116Z,1510163508.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:48.498Z,1510163508.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:48.520Z,1510163508.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:48.898Z,1510163508.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:48.919Z,1510163508.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:49.286Z,1510163509.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:49.303Z,1510163509.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:49.683Z,1510163509.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:49.705Z,1510163509.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:50.087Z,1510163510.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:50.115Z,1510163510.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:50.479Z,1510163510.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:50.505Z,1510163510.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:50.900Z,1510163510.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:50.924Z,1510163510.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:51.303Z,1510163511.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:51.323Z,1510163511.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:51.699Z,1510163511.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:51.719Z,1510163511.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:52.084Z,1510163512.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:52.116Z,1510163512.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:52.479Z,1510163512.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:52.521Z,1510163512.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:52.900Z,1510163512.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:52.924Z,1510163512.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:53.298Z,1510163513.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:53.357Z,1510163513.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:53.699Z,1510163513.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:53.719Z,1510163513.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:54.080Z,1510163514.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:54.127Z,1510163514.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:54.479Z,1510163514.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:54.512Z,1510163514.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:54.889Z,1510163514.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:54.921Z,1510163514.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:55.301Z,1510163515.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:55.317Z,1510163515.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:55.690Z,1510163515.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:55.721Z,1510163515.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:56.084Z,1510163516.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:56.117Z,1510163516.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:56.479Z,1510163516.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:56.504Z,1510163516.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:56.894Z,1510163516.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:56.926Z,1510163516.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:57.293Z,1510163517.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:57.318Z,1510163517.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:57.705Z,1510163517.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:57.721Z,1510163517.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:58.080Z,1510163518.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:58.118Z,1510163518.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:58.483Z,1510163518.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:58.518Z,1510163518.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:58.893Z,1510163518.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:58.926Z,1510163518.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:59.293Z,1510163519.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:59.320Z,1510163519.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:51:59.689Z,1510163519.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:51:59.721Z,1510163519.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:00.079Z,1510163520.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:00.119Z,1510163520.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:00.480Z,1510163520.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:00.496Z,1510163520.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:00.883Z,1510163520.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:00.898Z,1510163520.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:01.297Z,1510163521.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:01.325Z,1510163521.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:01.697Z,1510163521.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:01.724Z,1510163521.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:02.089Z,1510163522.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:02.126Z,1510163522.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:02.479Z,1510163522.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:02.531Z,1510163522.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:02.883Z,1510163522.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:02.902Z,1510163522.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:03.286Z,1510163523.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:03.302Z,1510163523.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:03.684Z,1510163523.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:03.700Z,1510163523.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:04.094Z,1510163524.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:04.126Z,1510163524.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:04.497Z,1510163524.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:04.535Z,1510163524.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:04.897Z,1510163524.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:04.930Z,1510163524.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:05.287Z,1510163525.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:05.303Z,1510163525.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:05.687Z,1510163525.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:05.703Z,1510163525.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:06.087Z,1510163526.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:06.112Z,1510163526.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:06.483Z,1510163526.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:06.501Z,1510163526.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:06.898Z,1510163526.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:06.914Z,1510163526.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:07.297Z,1510163527.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:07.336Z,1510163527.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:07.694Z,1510163527.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:07.711Z,1510163527.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:08.082Z,1510163528.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:08.112Z,1510163528.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:08.489Z,1510163528.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:08.506Z,1510163528.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:08.894Z,1510163528.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:08.910Z,1510163528.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:09.297Z,1510163529.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:09.313Z,1510163529.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:09.698Z,1510163529.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:09.714Z,1510163529.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:10.086Z,1510163530.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:10.102Z,1510163530.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:10.487Z,1510163530.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:10.503Z,1510163530.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:10.898Z,1510163530.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:10.914Z,1510163530.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:11.294Z,1510163531.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:11.310Z,1510163531.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:11.693Z,1510163531.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:11.712Z,1510163531.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:12.091Z,1510163532.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:12.112Z,1510163532.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:12.488Z,1510163532.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:12.505Z,1510163532.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:12.897Z,1510163532.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:12.961Z,1510163532.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:15.990Z,1510163535.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:16.055Z,1510163536.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:16.198Z,1510163536.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:16.220Z,1510163536.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:16.576Z,1510163536.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:16.608Z,1510163536.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:16.976Z,1510163536.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:17.043Z,1510163537.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:17.384Z,1510163537.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:17.400Z,1510163537.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:17.771Z,1510163537.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:17.821Z,1510163537.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:18.193Z,1510163538.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:18.210Z,1510163538.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:18.588Z,1510163538.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:18.605Z,1510163538.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:18.986Z,1510163538.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:19.020Z,1510163539.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:19.372Z,1510163539.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:19.399Z,1510163539.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:19.772Z,1510163539.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:19.797Z,1510163539.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:20.172Z,1510163540.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:20.203Z,1510163540.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:20.572Z,1510163540.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:20.598Z,1510163540.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:20.989Z,1510163540.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:21.005Z,1510163541.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:21.388Z,1510163541.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:21.404Z,1510163541.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:21.793Z,1510163541.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:21.810Z,1510163541.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:22.168Z,1510163542.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:22.201Z,1510163542.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:22.571Z,1510163542.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:22.591Z,1510163542.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:22.972Z,1510163542.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:23.005Z,1510163543.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:23.368Z,1510163543.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:23.408Z,1510163543.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:23.767Z,1510163543.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:23.783Z,1510163543.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:24.186Z,1510163544.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:24.213Z,1510163544.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:24.586Z,1510163544.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:24.612Z,1510163544.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:24.986Z,1510163544.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:25.011Z,1510163545.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:25.372Z,1510163545.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:25.389Z,1510163545.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:25.772Z,1510163545.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:25.788Z,1510163545.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:26.168Z,1510163546.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:26.209Z,1510163546.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:26.575Z,1510163546.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:26.591Z,1510163546.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:26.986Z,1510163546.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:27.018Z,1510163547.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:27.389Z,1510163547.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:27.423Z,1510163547.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:27.790Z,1510163547.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:27.816Z,1510163547.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:28.176Z,1510163548.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:28.221Z,1510163548.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:28.575Z,1510163548.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:28.591Z,1510163548.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:28.976Z,1510163548.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:28.992Z,1510163548.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:29.372Z,1510163549.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:29.389Z,1510163549.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:29.776Z,1510163549.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:29.792Z,1510163549.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:30.186Z,1510163550.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:30.218Z,1510163550.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:30.582Z,1510163550.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:30.614Z,1510163550.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:30.989Z,1510163550.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:31.020Z,1510163551.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:31.371Z,1510163551.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:31.395Z,1510163551.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:31.775Z,1510163551.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:31.792Z,1510163551.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:32.176Z,1510163552.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:32.192Z,1510163552.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:32.575Z,1510163552.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:32.592Z,1510163552.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:32.987Z,1510163552.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:33.022Z,1510163553.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:33.387Z,1510163553.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:33.423Z,1510163553.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:33.787Z,1510163553.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:33.804Z,1510163553.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:34.175Z,1510163554.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:34.193Z,1510163554.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:34.576Z,1510163554.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:34.599Z,1510163554.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:34.978Z,1510163554.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:34.995Z,1510163554.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:35.377Z,1510163555.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:35.407Z,1510163555.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:35.776Z,1510163555.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:35.796Z,1510163555.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:36.186Z,1510163556.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:36.208Z,1510163556.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:36.586Z,1510163556.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:36.658Z,1510163556.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:36.987Z,1510163556.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:37.003Z,1510163557.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:37.382Z,1510163557.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:37.398Z,1510163557.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:37.778Z,1510163557.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:37.794Z,1510163557.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:38.178Z,1510163558.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:38.213Z,1510163558.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:38.567Z,1510163558.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:38.600Z,1510163558.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:38.991Z,1510163558.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:39.043Z,1510163559.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:39.391Z,1510163559.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:39.411Z,1510163559.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:39.789Z,1510163559.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:39.847Z,1510163559.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:40.178Z,1510163560.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:40.195Z,1510163560.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:40.571Z,1510163560.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:40.604Z,1510163560.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:40.967Z,1510163560.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:41.001Z,1510163561.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:41.372Z,1510163561.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:41.398Z,1510163561.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:41.771Z,1510163561.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:41.803Z,1510163561.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:42.189Z,1510163562.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:42.205Z,1510163562.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:42.590Z,1510163562.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:42.611Z,1510163562.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:42.988Z,1510163562.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:43.004Z,1510163563.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:43.372Z,1510163563.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:43.398Z,1510163563.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:43.772Z,1510163563.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:43.803Z,1510163563.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:44.172Z,1510163564.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:44.197Z,1510163564.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:44.567Z,1510163564.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:44.596Z,1510163564.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:44.992Z,1510163564.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:45.009Z,1510163565.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:45.392Z,1510163565.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:45.408Z,1510163565.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:45.789Z,1510163565.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:45.805Z,1510163565.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:46.172Z,1510163566.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:46.209Z,1510163566.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:46.571Z,1510163566.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:46.605Z,1510163566.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:46.967Z,1510163566.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:46.984Z,1510163566.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:47.372Z,1510163567.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:47.405Z,1510163567.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:47.771Z,1510163567.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:47.787Z,1510163567.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:48.182Z,1510163568.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:48.227Z,1510163568.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:48.586Z,1510163568.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:48.616Z,1510163568.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:48.990Z,1510163568.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:49.019Z,1510163569.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:49.372Z,1510163569.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:49.389Z,1510163569.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:49.776Z,1510163569.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:49.792Z,1510163569.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:50.172Z,1510163570.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:50.188Z,1510163570.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:50.577Z,1510163570.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:50.593Z,1510163570.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:50.986Z,1510163570.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:51.024Z,1510163571.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:51.386Z,1510163571.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:51.420Z,1510163571.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:51.787Z,1510163571.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:51.823Z,1510163571.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:52.175Z,1510163572.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:52.192Z,1510163572.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:52.574Z,1510163572.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:52.591Z,1510163572.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:52.975Z,1510163572.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:52.992Z,1510163572.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:53.375Z,1510163573.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:53.450Z,1510163573.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:53.776Z,1510163573.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:53.793Z,1510163573.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:54.186Z,1510163574.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:54.203Z,1510163574.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:54.586Z,1510163574.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:54.604Z,1510163574.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:54.705Z,1510163574.705 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T17:52:54.982Z,1510163574.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:54.998Z,1510163574.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:55.377Z,1510163575.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:55.393Z,1510163575.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:55.777Z,1510163575.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:55.794Z,1510163575.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:56.177Z,1510163576.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:56.194Z,1510163576.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:56.574Z,1510163576.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:56.591Z,1510163576.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:56.986Z,1510163576.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:57.008Z,1510163577.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:57.389Z,1510163577.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:57.405Z,1510163577.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:57.787Z,1510163577.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:57.803Z,1510163577.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:58.178Z,1510163578.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:58.194Z,1510163578.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:58.578Z,1510163578.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:58.639Z,1510163578.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:58.979Z,1510163578.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:58.995Z,1510163578.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:59.379Z,1510163579.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:59.439Z,1510163579.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:52:59.778Z,1510163579.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:52:59.800Z,1510163579.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:00.188Z,1510163580.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:00.239Z,1510163580.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:00.587Z,1510163580.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:00.608Z,1510163580.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:00.987Z,1510163580.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:01.008Z,1510163581.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:01.375Z,1510163581.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:01.391Z,1510163581.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:01.775Z,1510163581.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:01.791Z,1510163581.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:02.176Z,1510163582.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:02.197Z,1510163582.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:02.588Z,1510163582.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:02.604Z,1510163582.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:02.987Z,1510163582.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:03.003Z,1510163583.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:03.386Z,1510163583.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:03.402Z,1510163583.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:03.779Z,1510163583.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:03.796Z,1510163583.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:04.178Z,1510163584.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:04.195Z,1510163584.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:04.576Z,1510163584.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:04.597Z,1510163584.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:04.980Z,1510163584.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:04.996Z,1510163584.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:05.378Z,1510163585.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:05.394Z,1510163585.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:05.788Z,1510163585.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:05.804Z,1510163585.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:06.188Z,1510163586.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:06.205Z,1510163586.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:06.588Z,1510163586.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:06.604Z,1510163586.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:06.979Z,1510163586.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:06.995Z,1510163586.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:07.385Z,1510163587.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:07.401Z,1510163587.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:07.779Z,1510163587.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:07.799Z,1510163587.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:08.178Z,1510163588.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:08.198Z,1510163588.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:08.589Z,1510163588.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:08.643Z,1510163588.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:08.988Z,1510163588.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:09.004Z,1510163589.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:09.387Z,1510163589.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:09.404Z,1510163589.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:09.780Z,1510163589.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:09.797Z,1510163589.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:10.170Z,1510163590.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:10.194Z,1510163590.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:10.576Z,1510163590.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:10.598Z,1510163590.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:10.982Z,1510163590.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:10.998Z,1510163590.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:11.372Z,1510163591.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:11.394Z,1510163591.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:11.787Z,1510163591.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:11.807Z,1510163591.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:12.189Z,1510163592.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:12.205Z,1510163592.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:12.588Z,1510163592.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:12.604Z,1510163592.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:12.983Z,1510163592.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:13.004Z,1510163593.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:16.078Z,1510163596.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:16.095Z,1510163596.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:16.207Z,1510163596.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:16.240Z,1510163596.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:16.626Z,1510163596.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:16.642Z,1510163596.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:17.026Z,1510163597.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:17.042Z,1510163597.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:17.414Z,1510163597.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:17.440Z,1510163597.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:17.803Z,1510163597.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:17.841Z,1510163597.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:18.199Z,1510163598.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:18.216Z,1510163598.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:18.599Z,1510163598.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:18.616Z,1510163598.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:19.004Z,1510163599.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:19.067Z,1510163599.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:19.406Z,1510163599.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:19.471Z,1510163599.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:19.814Z,1510163599.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:19.830Z,1510163599.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:20.222Z,1510163600.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:20.250Z,1510163600.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:20.618Z,1510163600.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:20.665Z,1510163600.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:21.004Z,1510163601.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:21.021Z,1510163601.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:21.406Z,1510163601.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:21.467Z,1510163601.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:21.807Z,1510163601.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:21.828Z,1510163601.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:22.204Z,1510163602.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:22.221Z,1510163602.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:22.618Z,1510163602.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:22.634Z,1510163602.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:23.013Z,1510163603.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:23.030Z,1510163603.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:23.414Z,1510163603.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:23.430Z,1510163603.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:23.809Z,1510163603.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:23.825Z,1510163603.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:24.206Z,1510163604.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:24.223Z,1510163604.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:24.602Z,1510163604.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:24.631Z,1510163604.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:25.008Z,1510163605.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:25.028Z,1510163605.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:25.406Z,1510163605.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:25.423Z,1510163605.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:25.814Z,1510163605.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:25.830Z,1510163605.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:26.218Z,1510163606.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:26.234Z,1510163606.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:26.614Z,1510163606.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:26.630Z,1510163606.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:27.005Z,1510163607.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:27.021Z,1510163607.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:27.409Z,1510163607.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:27.425Z,1510163607.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:27.807Z,1510163607.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:27.823Z,1510163607.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:28.205Z,1510163608.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:28.225Z,1510163608.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:28.614Z,1510163608.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:28.630Z,1510163608.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:29.013Z,1510163609.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:29.030Z,1510163609.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:29.414Z,1510163609.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:29.430Z,1510163609.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:29.809Z,1510163609.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:29.867Z,1510163609.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:30.209Z,1510163610.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:30.226Z,1510163610.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:30.603Z,1510163610.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:30.633Z,1510163610.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:31.008Z,1510163611.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:31.041Z,1510163611.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:31.407Z,1510163611.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:31.423Z,1510163611.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:31.814Z,1510163611.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:31.831Z,1510163611.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:32.222Z,1510163612.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:32.238Z,1510163612.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:32.617Z,1510163612.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:32.639Z,1510163612.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:33.010Z,1510163613.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:33.027Z,1510163613.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:33.407Z,1510163613.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:33.439Z,1510163613.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:33.808Z,1510163613.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:33.825Z,1510163613.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:34.206Z,1510163614.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:34.229Z,1510163614.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:34.615Z,1510163614.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:34.632Z,1510163614.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:35.016Z,1510163615.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:35.033Z,1510163615.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:35.415Z,1510163615.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:35.439Z,1510163615.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:35.809Z,1510163615.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:35.826Z,1510163615.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:36.203Z,1510163616.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:36.226Z,1510163616.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:36.610Z,1510163616.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:36.627Z,1510163616.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:37.008Z,1510163617.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:37.025Z,1510163617.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:37.415Z,1510163617.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:37.432Z,1510163617.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:37.814Z,1510163617.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:37.836Z,1510163617.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:38.215Z,1510163618.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:38.236Z,1510163618.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:38.611Z,1510163618.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:38.628Z,1510163618.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:39.003Z,1510163619.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:39.025Z,1510163619.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:39.415Z,1510163619.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:39.436Z,1510163619.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:39.816Z,1510163619.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:39.832Z,1510163619.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:40.217Z,1510163620.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:40.283Z,1510163620.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:40.607Z,1510163620.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:40.637Z,1510163620.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:41.007Z,1510163621.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:41.064Z,1510163621.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:41.409Z,1510163621.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:41.432Z,1510163621.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:41.819Z,1510163621.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:41.875Z,1510163621.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:42.219Z,1510163622.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:42.236Z,1510163622.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:42.619Z,1510163622.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:42.672Z,1510163622.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:43.010Z,1510163623.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:43.026Z,1510163623.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:43.406Z,1510163623.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:43.422Z,1510163623.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:43.806Z,1510163623.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:43.822Z,1510163623.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:44.207Z,1510163624.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:44.228Z,1510163624.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:44.620Z,1510163624.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:44.636Z,1510163624.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:45.020Z,1510163625.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:45.036Z,1510163625.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:45.420Z,1510163625.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:45.436Z,1510163625.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:45.807Z,1510163625.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:45.823Z,1510163625.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:46.203Z,1510163626.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:46.225Z,1510163626.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:46.610Z,1510163626.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:46.626Z,1510163626.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:47.007Z,1510163627.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:47.023Z,1510163627.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:47.414Z,1510163627.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:47.432Z,1510163627.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:47.819Z,1510163627.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:47.840Z,1510163627.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:48.219Z,1510163628.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:48.236Z,1510163628.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:48.619Z,1510163628.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:48.636Z,1510163628.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:49.007Z,1510163629.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:49.029Z,1510163629.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:49.406Z,1510163629.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:49.423Z,1510163629.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:49.813Z,1510163629.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:49.829Z,1510163629.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:50.210Z,1510163630.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:50.227Z,1510163630.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:50.620Z,1510163630.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:50.637Z,1510163630.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:51.020Z,1510163631.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:51.071Z,1510163631.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:51.420Z,1510163631.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:51.437Z,1510163631.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:51.808Z,1510163631.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:51.825Z,1510163631.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:52.203Z,1510163632.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:52.227Z,1510163632.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:52.607Z,1510163632.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:52.630Z,1510163632.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:53.008Z,1510163633.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:53.024Z,1510163633.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:53.403Z,1510163633.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:53.427Z,1510163633.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:53.819Z,1510163633.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:53.840Z,1510163633.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:54.219Z,1510163634.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:54.236Z,1510163634.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:54.620Z,1510163634.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:54.636Z,1510163634.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:55.009Z,1510163635.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:55.027Z,1510163635.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:55.406Z,1510163635.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:55.423Z,1510163635.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:55.810Z,1510163635.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:55.827Z,1510163635.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:56.209Z,1510163636.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:56.232Z,1510163636.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:56.619Z,1510163636.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:56.636Z,1510163636.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:57.019Z,1510163637.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:57.040Z,1510163637.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:57.416Z,1510163637.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:57.432Z,1510163637.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:57.803Z,1510163637.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:57.826Z,1510163637.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:58.203Z,1510163638.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:58.225Z,1510163638.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:58.607Z,1510163638.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:58.638Z,1510163638.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:59.011Z,1510163639.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:59.032Z,1510163639.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:59.403Z,1510163639.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:59.425Z,1510163639.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:53:59.819Z,1510163639.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:53:59.839Z,1510163639.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:00.219Z,1510163640.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:00.236Z,1510163640.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:00.619Z,1510163640.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:00.636Z,1510163640.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:01.007Z,1510163641.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:01.036Z,1510163641.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:01.410Z,1510163641.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:01.472Z,1510163641.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:01.810Z,1510163641.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:01.851Z,1510163641.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:02.203Z,1510163642.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:02.228Z,1510163642.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:02.619Z,1510163642.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:02.679Z,1510163642.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:03.020Z,1510163643.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:03.036Z,1510163643.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:03.419Z,1510163643.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:03.479Z,1510163643.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:03.799Z,1510163643.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:03.823Z,1510163643.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:04.203Z,1510163644.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:04.234Z,1510163644.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:04.599Z,1510163644.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:04.636Z,1510163644.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:05.004Z,1510163645.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:05.035Z,1510163645.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:05.403Z,1510163645.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:05.434Z,1510163645.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:05.821Z,1510163645.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:05.837Z,1510163645.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:06.221Z,1510163646.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:06.238Z,1510163646.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:06.620Z,1510163646.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:06.637Z,1510163646.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:07.003Z,1510163647.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:07.034Z,1510163647.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:07.399Z,1510163647.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:07.431Z,1510163647.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:07.804Z,1510163647.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:07.836Z,1510163647.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:08.205Z,1510163648.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:08.244Z,1510163648.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:08.617Z,1510163648.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:08.643Z,1510163648.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:09.018Z,1510163649.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:09.047Z,1510163649.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:09.413Z,1510163649.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:09.439Z,1510163649.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:09.803Z,1510163649.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:09.820Z,1510163649.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:10.207Z,1510163650.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:10.248Z,1510163650.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:10.607Z,1510163650.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:10.638Z,1510163650.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:11.008Z,1510163651.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:11.024Z,1510163651.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:11.403Z,1510163651.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:11.419Z,1510163651.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:11.817Z,1510163651.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:11.865Z,1510163651.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:12.218Z,1510163652.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:12.254Z,1510163652.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:12.619Z,1510163652.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:12.635Z,1510163652.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:13.011Z,1510163653.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:13.027Z,1510163653.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:16.099Z,1510163656.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:16.116Z,1510163656.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:16.219Z,1510163656.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:16.268Z,1510163656.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:16.634Z,1510163656.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:16.668Z,1510163656.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:17.044Z,1510163657.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:17.061Z,1510163657.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:17.434Z,1510163657.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:17.467Z,1510163657.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:17.819Z,1510163657.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:17.860Z,1510163657.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:18.220Z,1510163658.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:18.236Z,1510163658.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:18.616Z,1510163658.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:18.633Z,1510163658.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:19.015Z,1510163659.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:19.036Z,1510163659.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:19.434Z,1510163659.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:19.455Z,1510163659.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:19.834Z,1510163659.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:19.857Z,1510163659.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:20.234Z,1510163660.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:20.263Z,1510163660.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:20.620Z,1510163660.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:20.636Z,1510163660.636 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:20.636Z,1510163660.636 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90
2017-11-08T17:54:20.637Z,1510163660.637 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T17:54:20.638Z,1510163660.638 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:20.639Z,1510163660.639 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90
2017-11-08T17:54:20.639Z,1510163660.639 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T17:54:20.640Z,1510163660.640 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:20.653Z,1510163660.653 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 90
2017-11-08T17:54:20.653Z,1510163660.653 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T17:54:20.733Z,1510163660.733 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T17:54:20.733Z,1510163660.733 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T17:54:20.733Z,1510163660.733 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T17:54:21.020Z,1510163661.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:21.129Z,1510163661.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T17:54:21.129Z,1510163661.129 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90
2017-11-08T17:54:21.129Z,1510163661.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T17:54:21.129Z,1510163661.129 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90
2017-11-08T17:54:21.130Z,1510163661.130 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T17:54:21.130Z,1510163661.130 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 90
2017-11-08T17:54:21.433Z,1510163661.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:21.467Z,1510163661.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T17:54:21.467Z,1510163661.467 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:54:21.467Z,1510163661.467 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:54:21.468Z,1510163661.468 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T17:54:21.468Z,1510163661.468 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:54:21.469Z,1510163661.469 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:54:21.469Z,1510163661.469 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T17:54:21.469Z,1510163661.469 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:54:21.470Z,1510163661.470 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:54:21.830Z,1510163661.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:21.846Z,1510163661.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T17:54:21.847Z,1510163661.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:22.230Z,1510163662.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:22.246Z,1510163662.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T17:54:22.247Z,1510163662.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:22.622Z,1510163662.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:22.694Z,1510163662.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2017-11-08T17:54:22.695Z,1510163662.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:23.028Z,1510163663.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:23.044Z,1510163663.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T17:54:23.045Z,1510163663.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:23.419Z,1510163663.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:23.441Z,1510163663.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T17:54:23.442Z,1510163663.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:23.830Z,1510163663.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:23.898Z,1510163663.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2017-11-08T17:54:23.899Z,1510163663.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:24.234Z,1510163664.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:24.250Z,1510163664.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T17:54:24.251Z,1510163664.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:24.630Z,1510163664.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:24.647Z,1510163664.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T17:54:24.648Z,1510163664.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:25.026Z,1510163665.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:25.072Z,1510163665.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T17:54:25.073Z,1510163665.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:25.427Z,1510163665.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:25.447Z,1510163665.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T17:54:25.448Z,1510163665.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:25.821Z,1510163665.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:25.878Z,1510163665.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T17:54:25.879Z,1510163665.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:26.221Z,1510163666.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:26.243Z,1510163666.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T17:54:26.244Z,1510163666.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:26.634Z,1510163666.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:26.650Z,1510163666.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T17:54:26.651Z,1510163666.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:27.031Z,1510163667.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:27.047Z,1510163667.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T17:54:27.048Z,1510163667.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:27.431Z,1510163667.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:27.447Z,1510163667.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T17:54:27.448Z,1510163667.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:27.830Z,1510163667.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:27.846Z,1510163667.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T17:54:27.847Z,1510163667.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:28.219Z,1510163668.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:28.250Z,1510163668.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T17:54:28.251Z,1510163668.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:28.626Z,1510163668.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:28.641Z,1510163668.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T17:54:28.642Z,1510163668.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:29.028Z,1510163669.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:29.044Z,1510163669.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T17:54:29.045Z,1510163669.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:29.420Z,1510163669.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:29.441Z,1510163669.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T17:54:29.442Z,1510163669.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:29.832Z,1510163669.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:29.855Z,1510163669.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T17:54:29.856Z,1510163669.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:30.234Z,1510163670.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:30.274Z,1510163670.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T17:54:30.275Z,1510163670.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:30.631Z,1510163670.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:30.647Z,1510163670.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T17:54:30.649Z,1510163670.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:31.026Z,1510163671.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:31.042Z,1510163671.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T17:54:31.043Z,1510163671.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:31.426Z,1510163671.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:31.447Z,1510163671.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T17:54:31.448Z,1510163671.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:31.821Z,1510163671.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:31.842Z,1510163671.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T17:54:31.843Z,1510163671.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:32.226Z,1510163672.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:32.247Z,1510163672.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T17:54:32.248Z,1510163672.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:32.632Z,1510163672.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:32.648Z,1510163672.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T17:54:32.649Z,1510163672.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:33.034Z,1510163673.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:33.050Z,1510163673.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T17:54:33.051Z,1510163673.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:33.431Z,1510163673.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:33.447Z,1510163673.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T17:54:33.448Z,1510163673.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:33.821Z,1510163673.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:33.842Z,1510163673.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T17:54:33.843Z,1510163673.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:34.219Z,1510163674.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:34.270Z,1510163674.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T17:54:34.271Z,1510163674.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:34.626Z,1510163674.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:34.647Z,1510163674.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T17:54:34.648Z,1510163674.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:35.028Z,1510163675.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:35.044Z,1510163675.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T17:54:35.045Z,1510163675.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:35.426Z,1510163675.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:35.442Z,1510163675.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T17:54:35.443Z,1510163675.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:35.831Z,1510163675.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:35.847Z,1510163675.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T17:54:35.848Z,1510163675.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:36.234Z,1510163676.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:36.250Z,1510163676.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T17:54:36.251Z,1510163676.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:36.631Z,1510163676.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:36.647Z,1510163676.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T17:54:36.648Z,1510163676.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:37.025Z,1510163677.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:37.048Z,1510163677.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T17:54:37.049Z,1510163677.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:37.426Z,1510163677.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:37.442Z,1510163677.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T17:54:37.443Z,1510163677.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:37.825Z,1510163677.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:37.844Z,1510163677.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T17:54:37.845Z,1510163677.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:38.221Z,1510163678.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:38.243Z,1510163678.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T17:54:38.244Z,1510163678.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:38.631Z,1510163678.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:38.647Z,1510163678.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T17:54:38.649Z,1510163678.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:39.035Z,1510163679.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:39.055Z,1510163679.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T17:54:39.056Z,1510163679.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:39.435Z,1510163679.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:39.455Z,1510163679.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T17:54:39.456Z,1510163679.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:39.822Z,1510163679.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:39.838Z,1510163679.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T17:54:39.839Z,1510163679.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:40.215Z,1510163680.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:40.248Z,1510163680.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T17:54:40.249Z,1510163680.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:40.625Z,1510163680.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:40.642Z,1510163680.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:41.016Z,1510163681.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:41.053Z,1510163681.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:41.419Z,1510163681.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:41.444Z,1510163681.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:41.835Z,1510163681.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:41.852Z,1510163681.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:42.236Z,1510163682.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:42.253Z,1510163682.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:42.630Z,1510163682.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:42.655Z,1510163682.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:43.019Z,1510163683.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:43.044Z,1510163683.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:43.415Z,1510163683.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:43.447Z,1510163683.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:43.820Z,1510163683.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:43.851Z,1510163683.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:44.219Z,1510163684.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:44.256Z,1510163684.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:44.640Z,1510163684.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:44.664Z,1510163684.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:45.039Z,1510163685.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:45.108Z,1510163685.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:45.435Z,1510163685.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:45.455Z,1510163685.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:45.815Z,1510163685.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:45.847Z,1510163685.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:46.219Z,1510163686.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:46.271Z,1510163686.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:46.619Z,1510163686.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:46.647Z,1510163686.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:47.020Z,1510163687.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:47.046Z,1510163687.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:47.419Z,1510163687.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:47.475Z,1510163687.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:47.835Z,1510163687.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:47.852Z,1510163687.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:48.240Z,1510163688.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:48.297Z,1510163688.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:48.640Z,1510163688.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:48.663Z,1510163688.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:49.019Z,1510163689.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:49.047Z,1510163689.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:49.415Z,1510163689.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:49.444Z,1510163689.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:49.821Z,1510163689.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:49.854Z,1510163689.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:50.215Z,1510163690.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:50.250Z,1510163690.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:50.637Z,1510163690.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:50.654Z,1510163690.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:51.038Z,1510163691.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:51.059Z,1510163691.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:51.439Z,1510163691.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:51.459Z,1510163691.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:51.816Z,1510163691.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:51.840Z,1510163691.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:52.219Z,1510163692.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:52.244Z,1510163692.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:52.620Z,1510163692.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:52.635Z,1510163692.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:53.021Z,1510163693.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:53.053Z,1510163693.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:53.420Z,1510163693.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:53.436Z,1510163693.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:53.830Z,1510163693.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:53.861Z,1510163693.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:54.230Z,1510163694.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:54.270Z,1510163694.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:54.634Z,1510163694.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:54.663Z,1510163694.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:55.018Z,1510163695.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:55.040Z,1510163695.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:55.425Z,1510163695.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:55.442Z,1510163695.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:55.825Z,1510163695.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:55.842Z,1510163695.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:56.224Z,1510163696.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:56.240Z,1510163696.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:56.628Z,1510163696.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:56.679Z,1510163696.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:57.033Z,1510163697.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:57.050Z,1510163697.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:57.433Z,1510163697.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:57.449Z,1510163697.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:57.823Z,1510163697.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:57.839Z,1510163697.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:58.225Z,1510163698.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:58.242Z,1510163698.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:58.624Z,1510163698.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:58.641Z,1510163698.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:59.026Z,1510163699.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:59.043Z,1510163699.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:59.418Z,1510163699.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:59.447Z,1510163699.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:54:59.830Z,1510163699.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:54:59.846Z,1510163699.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:00.229Z,1510163700.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:00.246Z,1510163700.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:00.630Z,1510163700.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:00.646Z,1510163700.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:01.024Z,1510163701.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:01.041Z,1510163701.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:01.422Z,1510163701.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:01.438Z,1510163701.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:01.825Z,1510163701.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:01.848Z,1510163701.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:02.222Z,1510163702.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:02.250Z,1510163702.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:02.630Z,1510163702.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:02.646Z,1510163702.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:03.034Z,1510163703.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:03.050Z,1510163703.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:03.430Z,1510163703.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:03.446Z,1510163703.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:03.826Z,1510163703.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:03.842Z,1510163703.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:04.225Z,1510163704.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:04.248Z,1510163704.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:04.625Z,1510163704.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:04.642Z,1510163704.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:05.021Z,1510163705.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:05.047Z,1510163705.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:05.425Z,1510163705.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:05.448Z,1510163705.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:05.830Z,1510163705.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:05.846Z,1510163705.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:06.234Z,1510163706.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:06.250Z,1510163706.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:06.634Z,1510163706.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:06.650Z,1510163706.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:07.025Z,1510163707.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:07.087Z,1510163707.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:07.430Z,1510163707.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:07.447Z,1510163707.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:07.827Z,1510163707.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:07.844Z,1510163707.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:08.223Z,1510163708.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:08.253Z,1510163708.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:08.633Z,1510163708.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:08.697Z,1510163708.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:09.034Z,1510163709.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:09.056Z,1510163709.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:09.431Z,1510163709.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:09.452Z,1510163709.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:09.824Z,1510163709.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:09.879Z,1510163709.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:10.226Z,1510163710.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:10.248Z,1510163710.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:10.625Z,1510163710.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:10.679Z,1510163710.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:11.028Z,1510163711.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:11.045Z,1510163711.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:11.419Z,1510163711.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:11.450Z,1510163711.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:11.834Z,1510163711.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:11.850Z,1510163711.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:12.232Z,1510163712.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:12.249Z,1510163712.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:12.634Z,1510163712.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:12.650Z,1510163712.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:13.029Z,1510163713.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:13.045Z,1510163713.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:16.107Z,1510163716.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:16.132Z,1510163716.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:16.135Z,1510163716.135 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T17:50:15.9Z
2017-11-08T17:55:16.135Z,1510163716.135 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T17:55:16.135Z,1510163716.135 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T17:55:16.240Z,1510163716.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:16.273Z,1510163716.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:16.909Z,1510163716.909 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171108T132236/Courier0056.lzma
2017-11-08T17:55:16.952Z,1510163716.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:16.968Z,1510163716.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:17.122Z,1510163717.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:17.156Z,1510163717.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:17.489Z,1510163717.489 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0056.lzma.bak
2017-11-08T17:55:17.490Z,1510163717.490 [DataOverHttps](INFO): SBD MOMSN=5223152
2017-11-08T17:55:17.542Z,1510163717.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:17.559Z,1510163717.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:18.452Z,1510163718.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:18.468Z,1510163718.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:18.610Z,1510163718.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:18.659Z,1510163718.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:19.020Z,1510163719.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:19.089Z,1510163719.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:22.111Z,1510163722.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:22.127Z,1510163722.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:22.306Z,1510163722.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:22.342Z,1510163722.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:22.706Z,1510163722.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:22.728Z,1510163722.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:23.107Z,1510163723.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:23.124Z,1510163723.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:23.493Z,1510163723.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:23.509Z,1510163723.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:23.898Z,1510163723.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:23.920Z,1510163723.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:27.400Z,1510163727.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:27.488Z,1510163727.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:27.590Z,1510163727.590 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20171108T132236/Express0057.lzma
2017-11-08T17:55:27.655Z,1510163727.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:27.672Z,1510163727.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:28.030Z,1510163728.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:28.048Z,1510163728.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:28.390Z,1510163728.390 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0057.lzma.bak
2017-11-08T17:55:28.390Z,1510163728.390 [DataOverHttps](INFO): SBD MOMSN=5223155
2017-11-08T17:55:28.438Z,1510163728.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:28.471Z,1510163728.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:29.542Z,1510163729.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:29.577Z,1510163729.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:29.582Z,1510163729.582 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T17:55:29.582Z,1510163729.582 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T17:55:29.582Z,1510163729.582 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T17:55:29.731Z,1510163729.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:29.786Z,1510163729.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:32.792Z,1510163732.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:32.837Z,1510163732.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:33.003Z,1510163733.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:33.040Z,1510163733.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:33.407Z,1510163733.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:33.425Z,1510163733.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:33.817Z,1510163733.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:33.869Z,1510163733.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:34.184Z,1510163734.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:34.233Z,1510163734.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:34.598Z,1510163734.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:34.675Z,1510163734.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:34.986Z,1510163734.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:35.101Z,1510163735.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:35.388Z,1510163735.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:35.413Z,1510163735.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:35.808Z,1510163735.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:35.824Z,1510163735.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:36.203Z,1510163736.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:36.228Z,1510163736.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:36.604Z,1510163736.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:36.620Z,1510163736.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:36.988Z,1510163736.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:37.020Z,1510163737.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:37.388Z,1510163737.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:37.413Z,1510163737.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:37.797Z,1510163737.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:37.813Z,1510163737.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:38.188Z,1510163738.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:38.349Z,1510163738.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:38.607Z,1510163738.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:38.627Z,1510163738.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:39.004Z,1510163739.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:39.023Z,1510163739.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:39.413Z,1510163739.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:39.430Z,1510163739.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:39.786Z,1510163739.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:39.813Z,1510163739.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:40.191Z,1510163740.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:40.231Z,1510163740.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:40.590Z,1510163740.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:40.630Z,1510163740.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:41.011Z,1510163741.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:41.027Z,1510163741.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:41.389Z,1510163741.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:41.414Z,1510163741.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:41.806Z,1510163741.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:41.829Z,1510163741.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:42.201Z,1510163742.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:42.227Z,1510163742.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:42.602Z,1510163742.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:42.626Z,1510163742.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:42.995Z,1510163742.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:43.048Z,1510163743.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:43.400Z,1510163743.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:43.427Z,1510163743.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:43.799Z,1510163743.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:43.835Z,1510163743.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:44.189Z,1510163744.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:44.219Z,1510163744.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:44.603Z,1510163744.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:44.620Z,1510163744.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:45.004Z,1510163745.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:45.028Z,1510163745.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:45.404Z,1510163745.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:45.420Z,1510163745.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:45.799Z,1510163745.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:45.815Z,1510163745.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:46.188Z,1510163746.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:46.229Z,1510163746.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:46.588Z,1510163746.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:46.629Z,1510163746.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:46.989Z,1510163746.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:47.025Z,1510163747.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:47.392Z,1510163747.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:47.442Z,1510163747.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:47.809Z,1510163747.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:47.831Z,1510163747.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:48.198Z,1510163748.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:48.224Z,1510163748.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:48.614Z,1510163748.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:48.630Z,1510163748.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:48.984Z,1510163748.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:49.013Z,1510163749.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:49.393Z,1510163749.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:49.442Z,1510163749.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:49.794Z,1510163749.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:49.814Z,1510163749.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:50.191Z,1510163750.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:50.216Z,1510163750.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:50.610Z,1510163750.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:50.651Z,1510163750.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:51.011Z,1510163751.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:51.054Z,1510163751.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:51.403Z,1510163751.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:51.419Z,1510163751.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:51.801Z,1510163751.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:51.822Z,1510163751.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:52.201Z,1510163752.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:52.227Z,1510163752.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:52.587Z,1510163752.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:52.613Z,1510163752.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:52.989Z,1510163752.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:53.016Z,1510163753.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:53.384Z,1510163753.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:53.419Z,1510163753.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:53.801Z,1510163753.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:53.823Z,1510163753.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:54.208Z,1510163754.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:54.224Z,1510163754.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:54.608Z,1510163754.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:54.625Z,1510163754.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:54.987Z,1510163754.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:55.036Z,1510163755.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:55.389Z,1510163755.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:55.426Z,1510163755.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:55.785Z,1510163755.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:55.832Z,1510163755.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:56.186Z,1510163756.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:56.202Z,1510163756.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:56.597Z,1510163756.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:56.644Z,1510163756.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:56.998Z,1510163756.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:57.030Z,1510163757.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:57.401Z,1510163757.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:57.448Z,1510163757.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:57.784Z,1510163757.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:57.800Z,1510163757.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:58.188Z,1510163758.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:58.221Z,1510163758.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:58.591Z,1510163758.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:58.607Z,1510163758.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:58.984Z,1510163758.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:58.000Z,1510163759.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:59.383Z,1510163759.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:59.400Z,1510163759.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:55:59.794Z,1510163759.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:55:59.837Z,1510163759.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:00.197Z,1510163760.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:00.230Z,1510163760.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:00.598Z,1510163760.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:00.635Z,1510163760.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:00.988Z,1510163760.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:01.005Z,1510163761.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:01.388Z,1510163761.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:01.407Z,1510163761.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:01.790Z,1510163761.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:01.806Z,1510163761.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:02.187Z,1510163762.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:02.203Z,1510163762.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:02.600Z,1510163762.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:02.635Z,1510163762.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:03.002Z,1510163763.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:03.034Z,1510163763.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:03.402Z,1510163763.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:03.436Z,1510163763.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:03.790Z,1510163763.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:03.818Z,1510163763.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:04.200Z,1510163764.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:04.217Z,1510163764.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:04.594Z,1510163764.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:04.610Z,1510163764.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:04.996Z,1510163764.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:05.012Z,1510163765.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:05.392Z,1510163765.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:05.409Z,1510163765.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:05.802Z,1510163765.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:05.855Z,1510163765.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:06.202Z,1510163766.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:06.218Z,1510163766.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:06.603Z,1510163766.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:06.619Z,1510163766.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:06.989Z,1510163766.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:07.012Z,1510163767.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:07.394Z,1510163767.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:07.415Z,1510163767.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:07.792Z,1510163767.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:07.828Z,1510163767.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:08.193Z,1510163768.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:08.214Z,1510163768.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:08.603Z,1510163768.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:08.624Z,1510163768.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:09.005Z,1510163769.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:09.022Z,1510163769.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:09.406Z,1510163769.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:09.424Z,1510163769.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:09.795Z,1510163769.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:09.820Z,1510163769.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:10.183Z,1510163770.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:10.213Z,1510163770.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:10.583Z,1510163770.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:10.609Z,1510163770.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:10.993Z,1510163770.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:11.020Z,1510163771.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:11.388Z,1510163771.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:11.421Z,1510163771.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:11.807Z,1510163771.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:11.827Z,1510163771.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:12.219Z,1510163772.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:12.240Z,1510163772.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:12.606Z,1510163772.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:12.642Z,1510163772.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:12.990Z,1510163772.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:13.006Z,1510163773.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:13.391Z,1510163773.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:13.434Z,1510163773.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:13.795Z,1510163773.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:13.816Z,1510163773.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:14.193Z,1510163774.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:14.209Z,1510163774.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:14.602Z,1510163774.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:14.619Z,1510163774.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:15.002Z,1510163775.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:15.018Z,1510163775.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:15.402Z,1510163775.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:15.418Z,1510163775.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:15.794Z,1510163775.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:15.811Z,1510163775.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:16.200Z,1510163776.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:16.218Z,1510163776.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:16.601Z,1510163776.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:16.620Z,1510163776.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:16.997Z,1510163776.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:17.014Z,1510163777.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:17.394Z,1510163777.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:17.411Z,1510163777.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:17.803Z,1510163777.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:17.853Z,1510163777.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:18.215Z,1510163778.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:18.298Z,1510163778.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:18.607Z,1510163778.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:18.624Z,1510163778.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:18.997Z,1510163778.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:19.025Z,1510163779.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:19.388Z,1510163779.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:19.436Z,1510163779.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:19.795Z,1510163779.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:19.821Z,1510163779.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:20.187Z,1510163780.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:20.233Z,1510163780.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:20.610Z,1510163780.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:20.626Z,1510163780.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:21.012Z,1510163781.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:21.040Z,1510163781.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:21.407Z,1510163781.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:21.434Z,1510163781.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:21.793Z,1510163781.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:21.812Z,1510163781.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:22.194Z,1510163782.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:22.211Z,1510163782.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:22.592Z,1510163782.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:22.608Z,1510163782.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:22.996Z,1510163782.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:23.012Z,1510163783.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:23.399Z,1510163783.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:23.416Z,1510163783.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:23.808Z,1510163783.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:23.824Z,1510163783.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:24.211Z,1510163784.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:24.229Z,1510163784.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:24.608Z,1510163784.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:24.631Z,1510163784.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:24.988Z,1510163784.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:25.015Z,1510163785.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:25.384Z,1510163785.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:25.423Z,1510163785.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:25.790Z,1510163785.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:25.817Z,1510163785.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:26.187Z,1510163786.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:26.215Z,1510163786.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:26.606Z,1510163786.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:26.623Z,1510163786.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:27.009Z,1510163787.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:27.026Z,1510163787.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:27.408Z,1510163787.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:27.424Z,1510163787.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:27.784Z,1510163787.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:27.819Z,1510163787.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:28.188Z,1510163788.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:28.214Z,1510163788.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:28.587Z,1510163788.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:28.638Z,1510163788.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:28.989Z,1510163788.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:29.015Z,1510163789.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:29.388Z,1510163789.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:29.422Z,1510163789.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:29.807Z,1510163789.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:29.824Z,1510163789.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:30.212Z,1510163790.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:30.230Z,1510163790.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:33.287Z,1510163793.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:33.311Z,1510163793.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:33.427Z,1510163793.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:33.468Z,1510163793.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:33.831Z,1510163793.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:33.862Z,1510163793.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:34.231Z,1510163794.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:34.262Z,1510163794.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:34.631Z,1510163794.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:34.661Z,1510163794.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:35.024Z,1510163795.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:35.040Z,1510163795.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:35.423Z,1510163795.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:35.440Z,1510163795.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:35.838Z,1510163795.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:35.869Z,1510163795.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:36.241Z,1510163796.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:36.268Z,1510163796.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:36.638Z,1510163796.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:36.670Z,1510163796.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:37.027Z,1510163797.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:37.044Z,1510163797.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:37.427Z,1510163797.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:37.443Z,1510163797.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:37.824Z,1510163797.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:37.841Z,1510163797.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:38.223Z,1510163798.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:38.239Z,1510163798.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:38.638Z,1510163798.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:38.670Z,1510163798.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:39.042Z,1510163799.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:39.067Z,1510163799.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:39.437Z,1510163799.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:39.469Z,1510163799.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:39.827Z,1510163799.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:39.843Z,1510163799.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:40.223Z,1510163800.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:40.240Z,1510163800.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:40.623Z,1510163800.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:40.720Z,1510163800.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:41.032Z,1510163801.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:41.048Z,1510163801.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:41.429Z,1510163801.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:41.446Z,1510163801.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:41.837Z,1510163801.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:41.883Z,1510163801.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:42.237Z,1510163802.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:42.253Z,1510163802.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:42.638Z,1510163802.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:42.687Z,1510163802.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:43.032Z,1510163803.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:43.048Z,1510163803.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:43.430Z,1510163803.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:43.451Z,1510163803.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:43.835Z,1510163803.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:43.855Z,1510163803.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:44.232Z,1510163804.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:44.248Z,1510163804.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:44.636Z,1510163804.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:44.652Z,1510163804.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:45.042Z,1510163805.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:45.058Z,1510163805.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:45.437Z,1510163805.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:45.459Z,1510163805.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:45.830Z,1510163805.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:45.851Z,1510163805.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:46.235Z,1510163806.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:46.255Z,1510163806.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:46.633Z,1510163806.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:46.649Z,1510163806.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:47.033Z,1510163807.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:47.049Z,1510163807.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:47.434Z,1510163807.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:47.450Z,1510163807.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:47.838Z,1510163807.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:47.854Z,1510163807.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:48.238Z,1510163808.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:48.254Z,1510163808.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:48.643Z,1510163808.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:48.681Z,1510163808.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:49.031Z,1510163809.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:49.047Z,1510163809.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:49.430Z,1510163809.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:49.447Z,1510163809.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:49.834Z,1510163809.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:49.851Z,1510163809.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:50.232Z,1510163810.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:50.249Z,1510163810.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:50.635Z,1510163810.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:50.652Z,1510163810.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:51.042Z,1510163811.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:51.088Z,1510163811.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:51.437Z,1510163811.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:51.460Z,1510163811.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:51.830Z,1510163811.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:51.846Z,1510163811.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:52.233Z,1510163812.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:52.249Z,1510163812.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:52.632Z,1510163812.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:52.648Z,1510163812.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:53.032Z,1510163813.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:53.048Z,1510163813.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:53.433Z,1510163813.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:53.449Z,1510163813.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:53.838Z,1510163813.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:53.854Z,1510163813.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:54.237Z,1510163814.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:54.253Z,1510163814.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:54.642Z,1510163814.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:54.658Z,1510163814.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:55.026Z,1510163815.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:55.054Z,1510163815.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:55.430Z,1510163815.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:55.446Z,1510163815.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:55.834Z,1510163815.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:55.851Z,1510163815.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:56.226Z,1510163816.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:56.255Z,1510163816.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:56.636Z,1510163816.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:56.653Z,1510163816.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:57.042Z,1510163817.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:57.058Z,1510163817.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:57.438Z,1510163817.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:57.454Z,1510163817.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:57.830Z,1510163817.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:57.851Z,1510163817.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:57.953Z,1510163817.953 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:56:57.953Z,1510163817.953 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T17:56:58.209Z,1510163818.209 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:56:58.209Z,1510163818.209 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:56:58.209Z,1510163818.209 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:56:58.209Z,1510163818.209 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T17:56:58.209Z,1510163818.209 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:56:58.253Z,1510163818.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:58.277Z,1510163818.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:58.357Z,1510163818.357 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:56:58.613Z,1510163818.613 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:56:58.661Z,1510163818.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:58.723Z,1510163818.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:58.789Z,1510163818.789 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:56:59.041Z,1510163819.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:59.057Z,1510163819.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:59.427Z,1510163819.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:59.453Z,1510163819.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:56:59.844Z,1510163819.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:56:59.868Z,1510163819.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:00.248Z,1510163820.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:00.272Z,1510163820.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:00.377Z,1510163820.377 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:57:00.377Z,1510163820.377 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T17:57:00.405Z,1510163820.405 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:57:00.405Z,1510163820.405 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:57:00.405Z,1510163820.405 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:57:00.405Z,1510163820.405 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T17:57:00.406Z,1510163820.406 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:57:00.642Z,1510163820.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:00.663Z,1510163820.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:00.741Z,1510163820.741 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:57:00.809Z,1510163820.809 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:57:00.898Z,1510163820.898 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:57:01.032Z,1510163821.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:01.060Z,1510163821.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:01.423Z,1510163821.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:01.456Z,1510163821.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:01.829Z,1510163821.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:01.864Z,1510163821.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:02.227Z,1510163822.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:02.260Z,1510163822.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:02.349Z,1510163822.349 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:57:02.349Z,1510163822.349 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T17:57:02.513Z,1510163822.513 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:57:02.513Z,1510163822.513 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:57:02.513Z,1510163822.513 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:57:02.513Z,1510163822.513 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T17:57:02.513Z,1510163822.513 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:57:02.637Z,1510163822.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:02.671Z,1510163822.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:02.749Z,1510163822.749 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:57:02.917Z,1510163822.917 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:57:03.017Z,1510163823.017 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:57:03.054Z,1510163823.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:03.124Z,1510163823.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:03.442Z,1510163823.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:03.503Z,1510163823.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:03.829Z,1510163823.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:03.845Z,1510163823.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:04.229Z,1510163824.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:04.246Z,1510163824.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:04.341Z,1510163824.341 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:57:04.341Z,1510163824.341 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T17:57:04.627Z,1510163824.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:04.633Z,1510163824.633 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:57:04.633Z,1510163824.633 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:57:04.633Z,1510163824.633 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:57:04.633Z,1510163824.633 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T17:57:04.633Z,1510163824.633 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:57:04.700Z,1510163824.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:04.785Z,1510163824.785 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:57:05.032Z,1510163825.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:05.037Z,1510163825.037 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:57:05.124Z,1510163825.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:05.199Z,1510163825.199 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:57:05.432Z,1510163825.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:05.491Z,1510163825.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:05.838Z,1510163825.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:05.871Z,1510163825.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:06.246Z,1510163826.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:06.277Z,1510163826.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:06.642Z,1510163826.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:06.675Z,1510163826.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:06.766Z,1510163826.766 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T17:57:06.766Z,1510163826.766 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T17:57:06.817Z,1510163826.817 [Rowe_600LCM](INFO): Initializing
2017-11-08T17:57:06.817Z,1510163826.817 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T17:57:06.817Z,1510163826.817 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T17:57:06.818Z,1510163826.818 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T17:57:06.818Z,1510163826.818 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T17:57:07.026Z,1510163827.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:07.048Z,1510163827.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:07.137Z,1510163827.137 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:57:07.137Z,1510163827.137 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T17:57:07.221Z,1510163827.221 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T17:57:07.310Z,1510163827.310 [Rowe_600LCM](INFO): Powering down
2017-11-08T17:57:07.435Z,1510163827.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:07.472Z,1510163827.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:07.835Z,1510163827.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:07.857Z,1510163827.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:08.233Z,1510163828.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:08.250Z,1510163828.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:08.642Z,1510163828.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:08.659Z,1510163828.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:09.042Z,1510163829.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:09.059Z,1510163829.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:09.438Z,1510163829.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:09.455Z,1510163829.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:09.830Z,1510163829.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:09.847Z,1510163829.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:10.233Z,1510163830.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:10.250Z,1510163830.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:10.633Z,1510163830.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:10.649Z,1510163830.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:11.035Z,1510163831.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:11.051Z,1510163831.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:11.433Z,1510163831.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:11.449Z,1510163831.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:11.838Z,1510163831.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:11.854Z,1510163831.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:12.249Z,1510163832.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:12.281Z,1510163832.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:12.635Z,1510163832.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:12.656Z,1510163832.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:13.032Z,1510163833.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:13.049Z,1510163833.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:13.433Z,1510163833.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:13.449Z,1510163833.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:13.835Z,1510163833.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:13.884Z,1510163833.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:14.232Z,1510163834.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:14.249Z,1510163834.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:14.641Z,1510163834.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:14.681Z,1510163834.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:15.042Z,1510163835.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:15.058Z,1510163835.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:15.438Z,1510163835.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:15.454Z,1510163835.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:15.834Z,1510163835.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:15.849Z,1510163835.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:16.233Z,1510163836.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:16.249Z,1510163836.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:16.634Z,1510163836.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:16.651Z,1510163836.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:17.035Z,1510163837.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:17.051Z,1510163837.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:17.429Z,1510163837.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:17.446Z,1510163837.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:17.838Z,1510163837.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:17.854Z,1510163837.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:18.241Z,1510163838.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:18.257Z,1510163838.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:18.635Z,1510163838.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:18.652Z,1510163838.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:19.033Z,1510163839.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:19.049Z,1510163839.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:19.434Z,1510163839.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:19.449Z,1510163839.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:19.835Z,1510163839.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:19.856Z,1510163839.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:20.233Z,1510163840.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:20.250Z,1510163840.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:20.641Z,1510163840.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:20.658Z,1510163840.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:21.038Z,1510163841.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:21.055Z,1510163841.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:21.442Z,1510163841.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:21.458Z,1510163841.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:21.834Z,1510163841.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:21.850Z,1510163841.850 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:21.850Z,1510163841.850 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91
2017-11-08T17:57:21.850Z,1510163841.850 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T17:57:21.852Z,1510163841.852 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:21.852Z,1510163841.852 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91
2017-11-08T17:57:21.852Z,1510163841.852 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T17:57:21.854Z,1510163841.854 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:21.854Z,1510163841.854 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 91
2017-11-08T17:57:21.854Z,1510163841.854 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T17:57:21.941Z,1510163841.941 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T17:57:21.941Z,1510163841.941 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T17:57:21.941Z,1510163841.941 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T17:57:22.229Z,1510163842.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:22.317Z,1510163842.317 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T17:57:22.317Z,1510163842.317 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91
2017-11-08T17:57:22.317Z,1510163842.317 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T17:57:22.317Z,1510163842.317 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91
2017-11-08T17:57:22.318Z,1510163842.318 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T17:57:22.318Z,1510163842.318 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 91
2017-11-08T17:57:22.633Z,1510163842.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:22.649Z,1510163842.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T17:57:22.649Z,1510163842.649 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:57:22.649Z,1510163842.649 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:57:22.650Z,1510163842.650 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T17:57:22.650Z,1510163842.650 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:57:22.650Z,1510163842.650 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:57:22.651Z,1510163842.651 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T17:57:22.651Z,1510163842.651 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T17:57:22.652Z,1510163842.652 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T17:57:23.024Z,1510163843.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:23.058Z,1510163843.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T17:57:23.059Z,1510163843.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:23.424Z,1510163843.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:23.457Z,1510163843.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T17:57:23.458Z,1510163843.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:23.847Z,1510163843.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:23.863Z,1510163843.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T17:57:23.864Z,1510163843.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:24.247Z,1510163844.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:24.267Z,1510163844.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T17:57:24.268Z,1510163844.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:24.643Z,1510163844.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:24.659Z,1510163844.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T17:57:24.660Z,1510163844.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:25.034Z,1510163845.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:25.050Z,1510163845.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T17:57:25.051Z,1510163845.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:25.435Z,1510163845.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:25.451Z,1510163845.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T17:57:25.452Z,1510163845.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:25.825Z,1510163845.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:25.922Z,1510163845.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-08T17:57:25.923Z,1510163845.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:26.227Z,1510163846.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:26.253Z,1510163846.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T17:57:26.254Z,1510163846.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:26.644Z,1510163846.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:26.685Z,1510163846.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T17:57:26.686Z,1510163846.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:27.044Z,1510163847.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:27.060Z,1510163847.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T17:57:27.061Z,1510163847.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:27.443Z,1510163847.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:27.498Z,1510163847.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T17:57:27.499Z,1510163847.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:27.823Z,1510163847.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:27.852Z,1510163847.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T17:57:27.853Z,1510163847.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:28.227Z,1510163848.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:28.260Z,1510163848.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T17:57:28.261Z,1510163848.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:28.627Z,1510163848.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:28.652Z,1510163848.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T17:57:28.653Z,1510163848.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:29.024Z,1510163849.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:29.049Z,1510163849.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T17:57:29.050Z,1510163849.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:29.423Z,1510163849.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:29.448Z,1510163849.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T17:57:29.449Z,1510163849.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:29.847Z,1510163849.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:29.863Z,1510163849.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T17:57:29.864Z,1510163849.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:30.248Z,1510163850.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:30.265Z,1510163850.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T17:57:30.266Z,1510163850.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:33.318Z,1510163853.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:33.349Z,1510163853.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2017-11-08T17:57:33.350Z,1510163853.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:33.467Z,1510163853.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:33.495Z,1510163853.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T17:57:33.496Z,1510163853.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:33.867Z,1510163853.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:33.898Z,1510163853.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T17:57:33.899Z,1510163853.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:34.267Z,1510163854.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:34.297Z,1510163854.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T17:57:34.298Z,1510163854.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:34.665Z,1510163854.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:34.706Z,1510163854.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T17:57:34.707Z,1510163854.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:35.066Z,1510163855.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:35.118Z,1510163855.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T17:57:35.119Z,1510163855.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:35.465Z,1510163855.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:35.510Z,1510163855.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T17:57:35.511Z,1510163855.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:35.884Z,1510163855.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:35.956Z,1510163855.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T17:57:35.961Z,1510163855.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:36.279Z,1510163856.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:36.321Z,1510163856.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T17:57:36.322Z,1510163856.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:36.680Z,1510163856.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:36.724Z,1510163856.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T17:57:36.729Z,1510163856.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:37.065Z,1510163857.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:37.111Z,1510163857.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T17:57:37.121Z,1510163857.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:37.468Z,1510163857.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:37.534Z,1510163857.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T17:57:37.535Z,1510163857.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:37.869Z,1510163857.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:37.902Z,1510163857.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T17:57:37.902Z,1510163857.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:38.270Z,1510163858.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:38.290Z,1510163858.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T17:57:38.291Z,1510163858.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:38.681Z,1510163858.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:38.729Z,1510163858.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T17:57:38.730Z,1510163858.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:39.082Z,1510163859.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:39.106Z,1510163859.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T17:57:39.107Z,1510163859.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:39.474Z,1510163859.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:39.503Z,1510163859.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T17:57:39.504Z,1510163859.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:39.859Z,1510163859.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:39.875Z,1510163859.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T17:57:39.876Z,1510163859.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:40.259Z,1510163860.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:40.295Z,1510163860.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T17:57:40.296Z,1510163860.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:40.663Z,1510163860.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:40.703Z,1510163860.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T17:57:40.704Z,1510163860.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:41.060Z,1510163861.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:41.076Z,1510163861.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T17:57:41.077Z,1510163861.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:41.463Z,1510163861.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:41.483Z,1510163861.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T17:57:41.484Z,1510163861.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:41.878Z,1510163861.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:41.910Z,1510163861.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:42.281Z,1510163862.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:42.308Z,1510163862.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:42.674Z,1510163862.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:42.706Z,1510163862.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:43.067Z,1510163863.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:43.088Z,1510163863.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:43.466Z,1510163863.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:43.482Z,1510163863.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:43.869Z,1510163863.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:43.885Z,1510163863.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:44.267Z,1510163864.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:44.288Z,1510163864.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:44.676Z,1510163864.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:44.713Z,1510163864.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:45.082Z,1510163865.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:45.112Z,1510163865.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:45.474Z,1510163865.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:45.490Z,1510163865.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:45.867Z,1510163865.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:45.883Z,1510163865.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:46.268Z,1510163866.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:46.284Z,1510163866.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:46.667Z,1510163866.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:46.683Z,1510163866.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:47.068Z,1510163867.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:47.091Z,1510163867.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:47.468Z,1510163867.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:47.485Z,1510163867.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:47.878Z,1510163867.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:47.967Z,1510163867.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:48.282Z,1510163868.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:48.298Z,1510163868.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:48.676Z,1510163868.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:48.692Z,1510163868.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:49.069Z,1510163869.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:49.127Z,1510163869.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:49.464Z,1510163869.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:49.507Z,1510163869.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:49.874Z,1510163869.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:49.935Z,1510163869.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:50.263Z,1510163870.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:50.290Z,1510163870.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:50.684Z,1510163870.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:50.707Z,1510163870.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:51.079Z,1510163871.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:51.110Z,1510163871.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:51.479Z,1510163871.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:51.496Z,1510163871.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:51.863Z,1510163871.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:51.899Z,1510163871.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:52.259Z,1510163872.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:52.284Z,1510163872.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:52.663Z,1510163872.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:52.687Z,1510163872.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:53.073Z,1510163873.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:53.091Z,1510163873.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:53.459Z,1510163873.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:53.484Z,1510163873.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:53.879Z,1510163873.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:53.895Z,1510163873.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:54.284Z,1510163874.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:54.308Z,1510163874.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:54.675Z,1510163874.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:54.691Z,1510163874.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:55.063Z,1510163875.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:55.087Z,1510163875.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:55.464Z,1510163875.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:55.489Z,1510163875.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:55.872Z,1510163875.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:55.889Z,1510163875.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:56.259Z,1510163876.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:56.283Z,1510163876.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:56.684Z,1510163876.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:56.707Z,1510163876.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:57.079Z,1510163877.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:57.096Z,1510163877.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:57.479Z,1510163877.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:57.495Z,1510163877.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:57.863Z,1510163877.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:57.896Z,1510163877.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:58.259Z,1510163878.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:58.308Z,1510163878.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:58.659Z,1510163878.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:58.686Z,1510163878.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:59.065Z,1510163879.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:59.101Z,1510163879.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:59.467Z,1510163879.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:59.501Z,1510163879.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:57:59.877Z,1510163879.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:57:59.904Z,1510163879.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:00.277Z,1510163880.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:00.307Z,1510163880.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:00.670Z,1510163880.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:00.706Z,1510163880.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:01.059Z,1510163881.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:01.075Z,1510163881.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:01.464Z,1510163881.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:01.480Z,1510163881.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:01.865Z,1510163881.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:01.881Z,1510163881.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:02.267Z,1510163882.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:02.283Z,1510163882.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:02.682Z,1510163882.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:02.711Z,1510163882.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:03.081Z,1510163883.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:03.105Z,1510163883.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:03.477Z,1510163883.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:03.504Z,1510163883.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:03.867Z,1510163883.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:03.884Z,1510163883.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:04.267Z,1510163884.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:04.288Z,1510163884.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:04.662Z,1510163884.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:04.678Z,1510163884.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:05.068Z,1510163885.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:05.084Z,1510163885.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:05.467Z,1510163885.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:05.483Z,1510163885.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:05.875Z,1510163885.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:05.910Z,1510163885.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:06.282Z,1510163886.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:06.307Z,1510163886.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:06.679Z,1510163886.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:06.708Z,1510163886.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:07.065Z,1510163887.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:07.082Z,1510163887.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:07.466Z,1510163887.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:07.483Z,1510163887.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:07.868Z,1510163887.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:07.885Z,1510163887.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:08.265Z,1510163888.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:08.282Z,1510163888.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:08.678Z,1510163888.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:08.710Z,1510163888.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:09.078Z,1510163889.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:09.110Z,1510163889.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:09.477Z,1510163889.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:09.509Z,1510163889.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:09.867Z,1510163889.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:09.883Z,1510163889.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:10.262Z,1510163890.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:10.351Z,1510163890.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:10.665Z,1510163890.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:10.681Z,1510163890.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:11.068Z,1510163891.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:11.123Z,1510163891.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:11.466Z,1510163891.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:11.482Z,1510163891.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:11.877Z,1510163891.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:11.925Z,1510163891.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:12.277Z,1510163892.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:12.310Z,1510163892.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:12.674Z,1510163892.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:12.690Z,1510163892.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:13.063Z,1510163893.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:13.083Z,1510163893.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:13.466Z,1510163893.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:13.483Z,1510163893.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:13.867Z,1510163893.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:13.888Z,1510163893.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:14.265Z,1510163894.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:14.281Z,1510163894.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:14.678Z,1510163894.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:14.694Z,1510163894.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:15.077Z,1510163895.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:15.094Z,1510163895.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:15.469Z,1510163895.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:15.491Z,1510163895.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:15.867Z,1510163895.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:15.883Z,1510163895.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:16.266Z,1510163896.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:16.287Z,1510163896.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:16.665Z,1510163896.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:16.681Z,1510163896.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:17.062Z,1510163897.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:17.082Z,1510163897.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:17.462Z,1510163897.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:17.490Z,1510163897.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:17.870Z,1510163897.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:17.891Z,1510163897.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:18.277Z,1510163898.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:18.294Z,1510163898.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:18.674Z,1510163898.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:18.690Z,1510163898.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:19.068Z,1510163899.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:19.083Z,1510163899.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:19.469Z,1510163899.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:19.485Z,1510163899.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:19.867Z,1510163899.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:19.887Z,1510163899.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:20.265Z,1510163900.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:20.317Z,1510163900.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:20.678Z,1510163900.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:20.694Z,1510163900.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:21.078Z,1510163901.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:21.094Z,1510163901.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:21.474Z,1510163901.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:21.489Z,1510163901.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:21.869Z,1510163901.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:21.891Z,1510163901.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:22.269Z,1510163902.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:22.285Z,1510163902.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:22.668Z,1510163902.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:22.683Z,1510163902.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:23.071Z,1510163903.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:23.087Z,1510163903.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:23.462Z,1510163903.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:23.490Z,1510163903.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:23.879Z,1510163903.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:23.896Z,1510163903.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:24.283Z,1510163904.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:24.299Z,1510163904.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:24.680Z,1510163904.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:24.696Z,1510163904.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:25.074Z,1510163905.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:25.090Z,1510163905.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:25.472Z,1510163905.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:25.495Z,1510163905.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:25.869Z,1510163905.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:25.885Z,1510163905.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:26.259Z,1510163906.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:26.293Z,1510163906.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:26.684Z,1510163906.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:26.701Z,1510163906.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:27.081Z,1510163907.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:27.097Z,1510163907.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:27.481Z,1510163907.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:27.503Z,1510163907.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:27.859Z,1510163907.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:27.887Z,1510163907.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:28.260Z,1510163908.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:28.294Z,1510163908.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:28.667Z,1510163908.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:28.696Z,1510163908.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:29.069Z,1510163909.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:29.087Z,1510163909.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:29.459Z,1510163909.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:29.496Z,1510163909.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:29.885Z,1510163909.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:29.901Z,1510163909.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:30.283Z,1510163910.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:30.300Z,1510163910.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:33.371Z,1510163913.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:33.463Z,1510163913.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:33.591Z,1510163913.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:33.639Z,1510163913.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:33.985Z,1510163913.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:34.035Z,1510163914.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:34.387Z,1510163914.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:34.407Z,1510163914.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:34.786Z,1510163914.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:34.829Z,1510163914.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:35.186Z,1510163915.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:35.203Z,1510163915.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:35.558Z,1510163915.558 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T17:58:35.558Z,1510163915.558 [NAL9602] Data Fault, FailCount= 1
2017-11-08T17:58:35.558Z,1510163915.558 [NAL9602](ERROR): Data Fault
2017-11-08T17:58:35.578Z,1510163915.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:35.618Z,1510163915.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:35.701Z,1510163915.701 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T17:58:35.958Z,1510163915.958 [NAL9602](INFO): Powering down
2017-11-08T17:58:35.976Z,1510163915.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:36.023Z,1510163916.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:36.375Z,1510163916.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:36.406Z,1510163916.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:36.786Z,1510163916.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:36.802Z,1510163916.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:36.882Z,1510163916.882 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T17:58:36.882Z,1510163916.882 [NAL9602] No Fault, FailCount= 1
2017-11-08T17:58:37.175Z,1510163917.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:37.212Z,1510163917.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:37.586Z,1510163917.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:37.606Z,1510163917.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:37.975Z,1510163917.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:38.007Z,1510163918.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:38.375Z,1510163918.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:38.411Z,1510163918.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:38.776Z,1510163918.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:38.809Z,1510163918.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:39.175Z,1510163919.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:39.215Z,1510163919.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:39.575Z,1510163919.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:39.607Z,1510163919.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:39.975Z,1510163919.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:40.001Z,1510163920.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:40.379Z,1510163920.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:40.405Z,1510163920.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:40.775Z,1510163920.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:40.804Z,1510163920.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:41.175Z,1510163921.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:41.218Z,1510163921.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:41.575Z,1510163921.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:41.610Z,1510163921.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:41.975Z,1510163921.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:42.008Z,1510163922.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:42.375Z,1510163922.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:42.402Z,1510163922.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:42.779Z,1510163922.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:42.808Z,1510163922.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:43.175Z,1510163923.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:43.239Z,1510163923.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:43.575Z,1510163923.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:43.599Z,1510163923.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:43.979Z,1510163923.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:44.008Z,1510163924.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:44.375Z,1510163924.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:44.403Z,1510163924.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:44.778Z,1510163924.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:44.807Z,1510163924.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:45.179Z,1510163925.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:45.204Z,1510163925.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:45.575Z,1510163925.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:45.600Z,1510163925.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:45.975Z,1510163925.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:46.009Z,1510163926.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:46.375Z,1510163926.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:46.400Z,1510163926.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:46.775Z,1510163926.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:46.807Z,1510163926.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:47.175Z,1510163927.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:47.200Z,1510163927.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:47.575Z,1510163927.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:47.607Z,1510163927.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:47.975Z,1510163927.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:48.007Z,1510163928.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:48.378Z,1510163928.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:48.403Z,1510163928.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:48.775Z,1510163928.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:48.805Z,1510163928.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:49.179Z,1510163929.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:49.213Z,1510163929.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:49.578Z,1510163929.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:49.609Z,1510163929.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:49.974Z,1510163929.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:50.011Z,1510163930.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:50.375Z,1510163930.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:50.413Z,1510163930.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:50.775Z,1510163930.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:50.814Z,1510163930.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:51.174Z,1510163931.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:51.216Z,1510163931.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:51.575Z,1510163931.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:51.618Z,1510163931.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:51.975Z,1510163931.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:52.017Z,1510163932.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:52.379Z,1510163932.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:52.419Z,1510163932.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:52.779Z,1510163932.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:52.799Z,1510163932.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:53.175Z,1510163933.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:53.195Z,1510163933.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:53.583Z,1510163933.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:53.621Z,1510163933.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:53.983Z,1510163933.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:54.028Z,1510163934.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:54.379Z,1510163934.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:54.399Z,1510163934.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:54.783Z,1510163934.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:54.799Z,1510163934.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:55.178Z,1510163935.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:55.249Z,1510163935.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:55.578Z,1510163935.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:55.651Z,1510163935.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:55.982Z,1510163935.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:55.999Z,1510163935.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:56.378Z,1510163936.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:56.394Z,1510163936.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:56.778Z,1510163936.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:56.835Z,1510163936.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:57.180Z,1510163937.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:57.204Z,1510163937.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:57.581Z,1510163937.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:57.636Z,1510163937.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:57.979Z,1510163937.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:57.996Z,1510163937.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:58.380Z,1510163938.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:58.398Z,1510163938.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:58.779Z,1510163938.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:58.800Z,1510163938.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:59.179Z,1510163939.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:59.195Z,1510163939.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:59.581Z,1510163939.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:59.598Z,1510163939.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:58:59.979Z,1510163939.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:58:59.995Z,1510163939.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:00.380Z,1510163940.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:00.404Z,1510163940.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:00.781Z,1510163940.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:00.798Z,1510163940.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:01.181Z,1510163941.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:01.196Z,1510163941.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:01.580Z,1510163941.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:01.596Z,1510163941.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:01.985Z,1510163941.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:02.005Z,1510163942.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:02.381Z,1510163942.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:02.397Z,1510163942.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:02.781Z,1510163942.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:02.796Z,1510163942.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:03.185Z,1510163943.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:03.208Z,1510163943.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:03.584Z,1510163943.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:03.604Z,1510163943.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:03.979Z,1510163943.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:04.007Z,1510163944.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:04.385Z,1510163944.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:04.401Z,1510163944.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:04.780Z,1510163944.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:04.796Z,1510163944.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:05.180Z,1510163945.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:05.201Z,1510163945.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:05.585Z,1510163945.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:05.601Z,1510163945.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:05.980Z,1510163945.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:06.031Z,1510163946.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:06.362Z,1510163946.362 [NAL9602](INFO): Powering up NAL9602
2017-11-08T17:59:06.389Z,1510163946.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:06.412Z,1510163946.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:06.785Z,1510163946.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:06.805Z,1510163946.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:07.180Z,1510163947.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:07.203Z,1510163947.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:07.581Z,1510163947.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:07.603Z,1510163947.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:07.985Z,1510163947.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:08.004Z,1510163948.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:08.380Z,1510163948.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:08.404Z,1510163948.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:08.780Z,1510163948.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:08.796Z,1510163948.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:09.185Z,1510163949.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:09.203Z,1510163949.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:09.580Z,1510163949.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:09.596Z,1510163949.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:09.981Z,1510163949.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:10.001Z,1510163950.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:10.385Z,1510163950.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:10.401Z,1510163950.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:10.781Z,1510163950.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:10.803Z,1510163950.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:11.185Z,1510163951.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:11.204Z,1510163951.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:11.585Z,1510163951.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:11.605Z,1510163951.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:11.981Z,1510163951.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:12.003Z,1510163952.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:12.385Z,1510163952.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:12.400Z,1510163952.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:12.785Z,1510163952.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:12.804Z,1510163952.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:13.181Z,1510163953.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:13.204Z,1510163953.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:13.585Z,1510163953.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:13.601Z,1510163953.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:14.006Z,1510163954.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:14.026Z,1510163954.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:14.375Z,1510163954.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:14.391Z,1510163954.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:14.774Z,1510163954.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:14.819Z,1510163954.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:15.179Z,1510163955.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:15.200Z,1510163955.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:15.579Z,1510163955.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:15.602Z,1510163955.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:15.983Z,1510163955.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:16.008Z,1510163956.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:16.383Z,1510163956.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:16.403Z,1510163956.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:16.793Z,1510163956.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:16.836Z,1510163956.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:17.162Z,1510163957.162 [NAL9602](INFO): NAL9602 initialized
2017-11-08T17:59:17.179Z,1510163957.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:17.200Z,1510163957.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:17.583Z,1510163957.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:17.601Z,1510163957.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:17.995Z,1510163957.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:18.055Z,1510163958.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:18.390Z,1510163958.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:18.448Z,1510163958.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:18.795Z,1510163958.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:18.819Z,1510163958.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:19.188Z,1510163959.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:19.208Z,1510163959.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:19.581Z,1510163959.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:19.607Z,1510163959.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:19.993Z,1510163959.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:20.043Z,1510163960.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:20.396Z,1510163960.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:20.416Z,1510163960.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:20.794Z,1510163960.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:20.847Z,1510163960.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:21.181Z,1510163961.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:21.203Z,1510163961.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:21.586Z,1510163961.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:21.602Z,1510163961.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:21.995Z,1510163961.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:22.014Z,1510163962.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:22.394Z,1510163962.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:22.415Z,1510163962.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:22.797Z,1510163962.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:22.819Z,1510163962.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:23.186Z,1510163963.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:23.240Z,1510163963.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:23.582Z,1510163963.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:23.598Z,1510163963.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:23.995Z,1510163963.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:24.015Z,1510163964.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:24.395Z,1510163964.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:24.412Z,1510163964.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:24.791Z,1510163964.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:24.837Z,1510163964.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:25.187Z,1510163965.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:25.203Z,1510163965.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:25.579Z,1510163965.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:25.602Z,1510163965.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:25.993Z,1510163965.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:26.011Z,1510163966.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:26.394Z,1510163966.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:26.436Z,1510163966.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:26.794Z,1510163966.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:26.812Z,1510163966.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:27.182Z,1510163967.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:27.198Z,1510163967.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:27.591Z,1510163967.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:27.609Z,1510163967.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:27.994Z,1510163967.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:28.036Z,1510163968.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:28.394Z,1510163968.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:28.412Z,1510163968.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:28.794Z,1510163968.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:28.819Z,1510163968.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:29.186Z,1510163969.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:29.244Z,1510163969.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:29.582Z,1510163969.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:29.599Z,1510163969.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:29.997Z,1510163969.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:30.018Z,1510163970.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:30.395Z,1510163970.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:30.415Z,1510163970.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:33.491Z,1510163973.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:33.512Z,1510163973.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:33.645Z,1510163973.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:33.662Z,1510163973.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:34.042Z,1510163974.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:34.059Z,1510163974.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:34.446Z,1510163974.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:34.462Z,1510163974.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:34.842Z,1510163974.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:34.859Z,1510163974.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:35.253Z,1510163975.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:35.269Z,1510163975.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:35.649Z,1510163975.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:35.666Z,1510163975.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:36.058Z,1510163976.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:36.086Z,1510163976.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:36.446Z,1510163976.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:36.462Z,1510163976.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:36.845Z,1510163976.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:36.862Z,1510163976.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:37.246Z,1510163977.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:37.263Z,1510163977.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:37.646Z,1510163977.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:37.662Z,1510163977.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:38.053Z,1510163978.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:38.070Z,1510163978.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:38.454Z,1510163978.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:38.470Z,1510163978.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:38.847Z,1510163978.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:38.867Z,1510163978.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:39.248Z,1510163979.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:39.265Z,1510163979.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:39.647Z,1510163979.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:39.668Z,1510163979.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:40.044Z,1510163980.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:40.060Z,1510163980.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:40.448Z,1510163980.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:40.464Z,1510163980.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:40.848Z,1510163980.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:40.864Z,1510163980.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:41.253Z,1510163981.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:41.327Z,1510163981.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:41.649Z,1510163981.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:41.666Z,1510163981.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:42.054Z,1510163982.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:42.070Z,1510163982.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:42.448Z,1510163982.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:42.502Z,1510163982.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:42.847Z,1510163982.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:42.863Z,1510163982.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:43.244Z,1510163983.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:43.303Z,1510163983.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:43.644Z,1510163983.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:43.663Z,1510163983.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:44.054Z,1510163984.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:44.071Z,1510163984.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:44.458Z,1510163984.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:44.475Z,1510163984.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:44.849Z,1510163984.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:44.868Z,1510163984.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:45.242Z,1510163985.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:45.258Z,1510163985.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:45.646Z,1510163985.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:45.662Z,1510163985.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:46.046Z,1510163986.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:46.061Z,1510163986.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:46.442Z,1510163986.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:46.459Z,1510163986.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:46.843Z,1510163986.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:46.864Z,1510163986.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:47.254Z,1510163987.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:47.275Z,1510163987.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:47.649Z,1510163987.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:47.666Z,1510163987.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:48.054Z,1510163988.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:48.070Z,1510163988.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:48.445Z,1510163988.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:48.461Z,1510163988.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:48.843Z,1510163988.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:48.860Z,1510163988.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:49.245Z,1510163989.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:49.261Z,1510163989.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:49.645Z,1510163989.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:49.661Z,1510163989.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:50.053Z,1510163990.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:50.070Z,1510163990.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:50.461Z,1510163990.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:50.493Z,1510163990.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:50.858Z,1510163990.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:50.874Z,1510163990.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:51.243Z,1510163991.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:51.344Z,1510163991.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:51.645Z,1510163991.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:51.662Z,1510163991.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:52.045Z,1510163992.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:52.066Z,1510163992.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:52.451Z,1510163992.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:52.467Z,1510163992.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:52.846Z,1510163992.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:52.862Z,1510163992.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:53.250Z,1510163993.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:53.272Z,1510163993.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:53.651Z,1510163993.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:53.668Z,1510163993.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:54.058Z,1510163994.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:54.074Z,1510163994.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:54.443Z,1510163994.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:54.464Z,1510163994.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:54.846Z,1510163994.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:54.862Z,1510163994.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:55.248Z,1510163995.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:55.265Z,1510163995.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:55.648Z,1510163995.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:55.665Z,1510163995.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:56.051Z,1510163996.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:56.068Z,1510163996.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:56.453Z,1510163996.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:56.470Z,1510163996.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:56.854Z,1510163996.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:56.870Z,1510163996.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:57.250Z,1510163997.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:57.266Z,1510163997.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:57.646Z,1510163997.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:57.663Z,1510163997.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:58.044Z,1510163998.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:58.073Z,1510163998.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:58.450Z,1510163998.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:58.467Z,1510163998.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:58.846Z,1510163998.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:58.863Z,1510163998.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:59.251Z,1510163999.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:59.272Z,1510163999.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T17:59:59.652Z,1510163999.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T17:59:59.669Z,1510163999.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:00.054Z,1510164000.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:00.071Z,1510164000.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:00.449Z,1510164000.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:00.466Z,1510164000.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:00.847Z,1510164000.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:00.863Z,1510164000.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:01.247Z,1510164001.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:01.263Z,1510164001.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:01.650Z,1510164001.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:01.667Z,1510164001.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:02.054Z,1510164002.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:02.070Z,1510164002.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:02.451Z,1510164002.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:02.472Z,1510164002.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:02.851Z,1510164002.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:02.919Z,1510164002.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:03.251Z,1510164003.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:03.315Z,1510164003.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:03.647Z,1510164003.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:03.663Z,1510164003.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:04.046Z,1510164004.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:04.103Z,1510164004.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:04.449Z,1510164004.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:04.465Z,1510164004.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:04.848Z,1510164004.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:04.907Z,1510164004.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:05.259Z,1510164005.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:05.280Z,1510164005.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:05.657Z,1510164005.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:05.673Z,1510164005.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:06.055Z,1510164006.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:06.075Z,1510164006.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:06.445Z,1510164006.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:06.477Z,1510164006.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:06.839Z,1510164006.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:06.876Z,1510164006.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:07.236Z,1510164007.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:07.261Z,1510164007.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:07.639Z,1510164007.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:07.664Z,1510164007.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:08.060Z,1510164008.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:08.076Z,1510164008.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:08.459Z,1510164008.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:08.475Z,1510164008.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:08.854Z,1510164008.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:08.876Z,1510164008.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:09.235Z,1510164009.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:09.270Z,1510164009.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:09.638Z,1510164009.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:09.663Z,1510164009.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:10.049Z,1510164010.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:10.065Z,1510164010.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:10.436Z,1510164010.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:10.469Z,1510164010.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:10.835Z,1510164010.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:10.864Z,1510164010.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:11.259Z,1510164011.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:11.280Z,1510164011.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:11.660Z,1510164011.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:11.676Z,1510164011.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:12.056Z,1510164012.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:12.072Z,1510164012.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:12.436Z,1510164012.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:12.468Z,1510164012.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:12.838Z,1510164012.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:12.870Z,1510164012.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:13.244Z,1510164013.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:13.295Z,1510164013.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:13.639Z,1510164013.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:13.666Z,1510164013.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:14.050Z,1510164014.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:14.082Z,1510164014.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:14.454Z,1510164014.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:14.479Z,1510164014.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:14.858Z,1510164014.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:14.888Z,1510164014.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:15.235Z,1510164015.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:15.252Z,1510164015.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:15.635Z,1510164015.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:15.656Z,1510164015.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:16.041Z,1510164016.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:16.058Z,1510164016.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:16.440Z,1510164016.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:16.457Z,1510164016.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:16.839Z,1510164016.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:16.855Z,1510164016.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:17.258Z,1510164017.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:17.288Z,1510164017.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:17.657Z,1510164017.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:17.683Z,1510164017.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:18.050Z,1510164018.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:18.082Z,1510164018.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:18.443Z,1510164018.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:18.460Z,1510164018.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:18.844Z,1510164018.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:18.860Z,1510164018.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:19.244Z,1510164019.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:19.264Z,1510164019.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:19.643Z,1510164019.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:19.664Z,1510164019.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:20.057Z,1510164020.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:20.083Z,1510164020.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:20.454Z,1510164020.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:20.484Z,1510164020.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:20.858Z,1510164020.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:20.883Z,1510164020.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:21.243Z,1510164021.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:21.259Z,1510164021.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:21.639Z,1510164021.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:21.656Z,1510164021.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:22.043Z,1510164022.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:22.060Z,1510164022.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:22.443Z,1510164022.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:22.460Z,1510164022.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:22.843Z,1510164022.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:22.859Z,1510164022.859 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:22.860Z,1510164022.860 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92
2017-11-08T18:00:22.860Z,1510164022.860 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T18:00:22.862Z,1510164022.862 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:22.862Z,1510164022.862 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92
2017-11-08T18:00:22.862Z,1510164022.862 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T18:00:22.863Z,1510164022.863 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:22.864Z,1510164022.864 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 92
2017-11-08T18:00:22.864Z,1510164022.864 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T18:00:22.961Z,1510164022.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T18:00:22.961Z,1510164022.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T18:00:22.961Z,1510164022.961 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T18:00:23.247Z,1510164023.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:23.345Z,1510164023.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T18:00:23.345Z,1510164023.345 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92
2017-11-08T18:00:23.345Z,1510164023.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T18:00:23.345Z,1510164023.345 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92
2017-11-08T18:00:23.346Z,1510164023.346 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T18:00:23.346Z,1510164023.346 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 92
2017-11-08T18:00:23.651Z,1510164023.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:23.666Z,1510164023.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T18:00:23.666Z,1510164023.666 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:00:23.667Z,1510164023.667 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:00:23.667Z,1510164023.667 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T18:00:23.668Z,1510164023.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:00:23.668Z,1510164023.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:00:23.668Z,1510164023.668 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T18:00:23.677Z,1510164023.677 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:00:23.677Z,1510164023.677 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:00:24.050Z,1510164024.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:24.071Z,1510164024.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T18:00:24.072Z,1510164024.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:24.446Z,1510164024.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:24.463Z,1510164024.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T18:00:24.464Z,1510164024.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:24.842Z,1510164024.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:24.858Z,1510164024.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T18:00:24.859Z,1510164024.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:25.242Z,1510164025.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:25.314Z,1510164025.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2017-11-08T18:00:25.315Z,1510164025.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:25.645Z,1510164025.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:25.710Z,1510164025.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2017-11-08T18:00:25.711Z,1510164025.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:26.059Z,1510164026.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:26.076Z,1510164026.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T18:00:26.077Z,1510164026.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:26.455Z,1510164026.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:26.471Z,1510164026.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T18:00:26.472Z,1510164026.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:26.855Z,1510164026.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:26.910Z,1510164026.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-08T18:00:26.911Z,1510164026.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:27.248Z,1510164027.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:27.264Z,1510164027.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T18:00:27.265Z,1510164027.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:27.650Z,1510164027.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:27.707Z,1510164027.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T18:00:27.708Z,1510164027.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:28.043Z,1510164028.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:28.074Z,1510164028.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T18:00:28.075Z,1510164028.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:28.436Z,1510164028.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:28.469Z,1510164028.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T18:00:28.470Z,1510164028.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:28.842Z,1510164028.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:28.863Z,1510164028.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T18:00:28.864Z,1510164028.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:29.258Z,1510164029.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:29.279Z,1510164029.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T18:00:29.280Z,1510164029.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:29.656Z,1510164029.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:29.672Z,1510164029.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T18:00:29.673Z,1510164029.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:30.058Z,1510164030.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:30.074Z,1510164030.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T18:00:30.075Z,1510164030.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:30.078Z,1510164030.078 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T18:00:30.078Z,1510164030.078 [Default:CheckIn:C.Wait] Stopped
2017-11-08T18:00:30.078Z,1510164030.078 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T18:00:30.078Z,1510164030.078 [Default:CheckIn:D] Running Loop=1
2017-11-08T18:00:30.451Z,1510164030.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:30.466Z,1510164030.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T18:00:30.467Z,1510164030.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:30.471Z,1510164030.471 [Default:CheckIn:D] Stopped
2017-11-08T18:00:30.471Z,1510164030.471 [Default:CheckIn:E] Running Loop=1
2017-11-08T18:00:33.526Z,1510164033.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:33.559Z,1510164033.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2017-11-08T18:00:33.560Z,1510164033.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:33.563Z,1510164033.563 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 273.824837 min 
2017-11-08T18:00:33.564Z,1510164033.564 [Default:CheckIn:E] Stopped
2017-11-08T18:00:33.564Z,1510164033.564 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T18:00:33.564Z,1510164033.564 [Default:CheckIn] Stopped
2017-11-08T18:00:33.564Z,1510164033.564 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T18:00:33.564Z,1510164033.564 [Default:CheckIn](INFO): Running loop #15
2017-11-08T18:00:33.564Z,1510164033.564 [Default:CheckIn] Running Loop=15
2017-11-08T18:00:33.569Z,1510164033.569 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T18:00:33.569Z,1510164033.569 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T18:00:33.687Z,1510164033.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:33.719Z,1510164033.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T18:00:33.720Z,1510164033.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:34.104Z,1510164034.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:34.120Z,1510164034.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T18:00:34.121Z,1510164034.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:34.505Z,1510164034.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:34.521Z,1510164034.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T18:00:34.522Z,1510164034.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:34.894Z,1510164034.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:34.925Z,1510164034.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T18:00:34.926Z,1510164034.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:35.283Z,1510164035.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:35.317Z,1510164035.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T18:00:35.318Z,1510164035.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:35.683Z,1510164035.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:35.735Z,1510164035.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T18:00:35.737Z,1510164035.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:36.079Z,1510164036.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:36.115Z,1510164036.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T18:00:36.116Z,1510164036.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:36.484Z,1510164036.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:36.500Z,1510164036.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T18:00:36.517Z,1510164036.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:36.879Z,1510164036.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:36.895Z,1510164036.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T18:00:36.896Z,1510164036.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:37.294Z,1510164037.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:37.325Z,1510164037.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T18:00:37.326Z,1510164037.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:37.697Z,1510164037.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:37.724Z,1510164037.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T18:00:37.725Z,1510164037.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:38.097Z,1510164038.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:38.125Z,1510164038.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T18:00:38.126Z,1510164038.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:38.483Z,1510164038.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:38.503Z,1510164038.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T18:00:38.504Z,1510164038.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:38.887Z,1510164038.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:38.907Z,1510164038.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T18:00:38.908Z,1510164038.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:39.287Z,1510164039.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:39.303Z,1510164039.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T18:00:39.304Z,1510164039.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:39.682Z,1510164039.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:39.698Z,1510164039.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T18:00:39.699Z,1510164039.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:40.098Z,1510164040.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:40.130Z,1510164040.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T18:00:40.131Z,1510164040.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:40.501Z,1510164040.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:40.537Z,1510164040.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T18:00:40.538Z,1510164040.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:40.893Z,1510164040.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:40.909Z,1510164040.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T18:00:40.910Z,1510164040.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:41.282Z,1510164041.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:41.306Z,1510164041.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T18:00:41.307Z,1510164041.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:41.687Z,1510164041.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:41.703Z,1510164041.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T18:00:41.704Z,1510164041.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:42.090Z,1510164042.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:42.111Z,1510164042.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T18:00:42.112Z,1510164042.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:42.491Z,1510164042.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:42.507Z,1510164042.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T18:00:42.508Z,1510164042.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:42.886Z,1510164042.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:42.903Z,1510164042.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:43.301Z,1510164043.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:43.317Z,1510164043.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:43.699Z,1510164043.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:43.720Z,1510164043.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:44.100Z,1510164044.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:44.116Z,1510164044.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:44.483Z,1510164044.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:44.506Z,1510164044.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:44.887Z,1510164044.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:44.909Z,1510164044.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:45.287Z,1510164045.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:45.308Z,1510164045.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:45.691Z,1510164045.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:45.707Z,1510164045.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:46.099Z,1510164046.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:46.120Z,1510164046.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:46.499Z,1510164046.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:46.520Z,1510164046.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:46.900Z,1510164046.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:46.916Z,1510164046.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:47.287Z,1510164047.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:47.309Z,1510164047.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:47.687Z,1510164047.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:47.764Z,1510164047.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:48.091Z,1510164048.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:48.112Z,1510164048.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:48.490Z,1510164048.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:48.550Z,1510164048.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:48.879Z,1510164048.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:48.912Z,1510164048.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:49.302Z,1510164049.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:49.359Z,1510164049.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:49.704Z,1510164049.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:49.720Z,1510164049.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:50.100Z,1510164050.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:50.117Z,1510164050.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:50.479Z,1510164050.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:50.516Z,1510164050.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:50.883Z,1510164050.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:50.907Z,1510164050.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:51.284Z,1510164051.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:51.310Z,1510164051.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:51.683Z,1510164051.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:51.708Z,1510164051.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:52.099Z,1510164052.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:52.115Z,1510164052.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:52.500Z,1510164052.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:52.516Z,1510164052.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:52.899Z,1510164052.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:52.915Z,1510164052.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:53.283Z,1510164053.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:53.315Z,1510164053.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:53.683Z,1510164053.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:53.709Z,1510164053.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:54.083Z,1510164054.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:54.108Z,1510164054.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:54.484Z,1510164054.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:54.515Z,1510164054.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:54.879Z,1510164054.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:54.914Z,1510164054.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:55.299Z,1510164055.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:55.315Z,1510164055.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:55.703Z,1510164055.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:55.718Z,1510164055.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:56.099Z,1510164056.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:56.115Z,1510164056.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:56.479Z,1510164056.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:56.512Z,1510164056.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:56.883Z,1510164056.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:56.913Z,1510164056.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:57.280Z,1510164057.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:57.312Z,1510164057.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:57.679Z,1510164057.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:57.732Z,1510164057.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:58.089Z,1510164058.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:58.121Z,1510164058.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:58.505Z,1510164058.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:58.521Z,1510164058.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:58.893Z,1510164058.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:58.926Z,1510164058.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:59.283Z,1510164059.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:59.317Z,1510164059.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:00:59.679Z,1510164059.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:00:59.695Z,1510164059.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:00.079Z,1510164060.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:00.099Z,1510164060.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:00.479Z,1510164060.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:00.495Z,1510164060.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:00.883Z,1510164060.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:00.899Z,1510164060.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:01.298Z,1510164061.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:01.330Z,1510164061.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:01.701Z,1510164061.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:01.736Z,1510164061.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:02.097Z,1510164062.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:02.130Z,1510164062.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:02.487Z,1510164062.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:02.507Z,1510164062.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:02.886Z,1510164062.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:02.902Z,1510164062.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:03.288Z,1510164063.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:03.304Z,1510164063.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:03.683Z,1510164063.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:03.703Z,1510164063.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:04.097Z,1510164064.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:04.132Z,1510164064.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:04.493Z,1510164064.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:04.510Z,1510164064.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:04.898Z,1510164064.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:04.930Z,1510164064.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:05.286Z,1510164065.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:05.302Z,1510164065.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:05.687Z,1510164065.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:05.703Z,1510164065.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:06.086Z,1510164066.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:06.103Z,1510164066.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:06.486Z,1510164066.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:06.503Z,1510164066.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:06.886Z,1510164066.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:06.903Z,1510164066.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:07.294Z,1510164067.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:07.311Z,1510164067.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:07.697Z,1510164067.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:07.735Z,1510164067.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:08.098Z,1510164068.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:08.131Z,1510164068.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:08.484Z,1510164068.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:08.500Z,1510164068.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:08.890Z,1510164068.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:08.906Z,1510164068.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:09.287Z,1510164069.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:09.308Z,1510164069.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:09.684Z,1510164069.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:09.762Z,1510164069.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:10.094Z,1510164070.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:10.110Z,1510164070.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:10.498Z,1510164070.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:10.514Z,1510164070.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:10.894Z,1510164070.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:10.910Z,1510164070.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:11.289Z,1510164071.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:11.311Z,1510164071.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:11.690Z,1510164071.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:11.707Z,1510164071.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:12.083Z,1510164072.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:12.104Z,1510164072.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:12.489Z,1510164072.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:12.505Z,1510164072.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:12.887Z,1510164072.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:12.901Z,1510164072.901 [BPC1](ERROR): Failed to receive battery data
2017-11-08T18:01:12.901Z,1510164072.901 [BPC1] Communications Fault, FailCount= 1
2017-11-08T18:01:12.901Z,1510164072.901 [BPC1](ERROR): Communications Fault
2017-11-08T18:01:12.910Z,1510164072.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:13.005Z,1510164073.005 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T18:01:13.294Z,1510164073.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:13.316Z,1510164073.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:13.697Z,1510164073.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:13.719Z,1510164073.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:14.098Z,1510164074.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:14.114Z,1510164074.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:14.205Z,1510164074.205 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T18:01:14.205Z,1510164074.205 [BPC1] No Fault, FailCount= 1
2017-11-08T18:01:14.483Z,1510164074.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:14.556Z,1510164074.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:14.889Z,1510164074.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:14.905Z,1510164074.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:15.287Z,1510164075.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:15.303Z,1510164075.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:15.683Z,1510164075.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:15.704Z,1510164075.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:16.094Z,1510164076.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:16.115Z,1510164076.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:16.498Z,1510164076.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:16.514Z,1510164076.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:16.895Z,1510164076.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:16.916Z,1510164076.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:17.285Z,1510164077.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:17.301Z,1510164077.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:17.691Z,1510164077.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:17.712Z,1510164077.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:18.083Z,1510164078.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:18.112Z,1510164078.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:18.485Z,1510164078.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:18.507Z,1510164078.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:18.891Z,1510164078.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:18.907Z,1510164078.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:19.299Z,1510164079.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:19.315Z,1510164079.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:19.699Z,1510164079.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:19.722Z,1510164079.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:20.102Z,1510164080.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:20.118Z,1510164080.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:20.483Z,1510164080.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:20.512Z,1510164080.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:20.889Z,1510164080.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:20.905Z,1510164080.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:21.292Z,1510164081.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:21.308Z,1510164081.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:21.690Z,1510164081.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:21.712Z,1510164081.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:22.100Z,1510164082.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:22.116Z,1510164082.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:22.504Z,1510164082.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:22.520Z,1510164082.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:22.900Z,1510164082.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:22.959Z,1510164082.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:23.287Z,1510164083.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:23.320Z,1510164083.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:23.684Z,1510164083.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:23.710Z,1510164083.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:24.083Z,1510164084.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:24.112Z,1510164084.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:24.483Z,1510164084.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:24.510Z,1510164084.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:24.883Z,1510164084.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:24.910Z,1510164084.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:25.304Z,1510164085.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:25.320Z,1510164085.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:25.704Z,1510164085.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:25.728Z,1510164085.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:26.104Z,1510164086.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:26.120Z,1510164086.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:26.480Z,1510164086.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:26.513Z,1510164086.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:26.879Z,1510164086.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:26.916Z,1510164086.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:27.285Z,1510164087.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:27.311Z,1510164087.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:27.683Z,1510164087.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:27.716Z,1510164087.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:28.100Z,1510164088.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:28.115Z,1510164088.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:28.500Z,1510164088.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:28.517Z,1510164088.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:28.899Z,1510164088.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:28.916Z,1510164088.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:29.279Z,1510164089.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:29.314Z,1510164089.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:29.683Z,1510164089.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:29.709Z,1510164089.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:30.087Z,1510164090.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:30.113Z,1510164090.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:30.488Z,1510164090.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:30.519Z,1510164090.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:33.601Z,1510164093.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:33.677Z,1510164093.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:33.820Z,1510164093.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:33.859Z,1510164093.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:34.216Z,1510164094.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:34.236Z,1510164094.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:34.617Z,1510164094.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:34.634Z,1510164094.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:35.006Z,1510164095.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:35.067Z,1510164095.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:35.403Z,1510164095.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:35.424Z,1510164095.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:35.797Z,1510164095.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:35.855Z,1510164095.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:36.215Z,1510164096.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:36.236Z,1510164096.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:36.615Z,1510164096.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:36.631Z,1510164096.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:37.010Z,1510164097.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:37.039Z,1510164097.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:37.406Z,1510164097.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:37.428Z,1510164097.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:37.807Z,1510164097.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:37.827Z,1510164097.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:38.208Z,1510164098.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:38.225Z,1510164098.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:38.606Z,1510164098.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:38.628Z,1510164098.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:39.017Z,1510164099.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:39.033Z,1510164099.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:39.412Z,1510164099.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:39.429Z,1510164099.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:39.816Z,1510164099.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:39.840Z,1510164099.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:40.205Z,1510164100.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:40.228Z,1510164100.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:40.592Z,1510164100.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:40.628Z,1510164100.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:40.995Z,1510164100.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:41.026Z,1510164101.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:41.400Z,1510164101.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:41.424Z,1510164101.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:41.792Z,1510164101.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:41.832Z,1510164101.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:42.219Z,1510164102.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:42.236Z,1510164102.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:42.619Z,1510164102.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:42.639Z,1510164102.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:43.009Z,1510164103.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:43.031Z,1510164103.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:43.395Z,1510164103.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:43.427Z,1510164103.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:43.799Z,1510164103.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:43.823Z,1510164103.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:44.200Z,1510164104.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:44.270Z,1510164104.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:44.599Z,1510164104.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:44.632Z,1510164104.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:45.019Z,1510164105.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:45.039Z,1510164105.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:45.421Z,1510164105.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:45.437Z,1510164105.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:45.820Z,1510164105.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:45.836Z,1510164105.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:46.195Z,1510164106.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:46.234Z,1510164106.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:46.592Z,1510164106.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:46.632Z,1510164106.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:46.000Z,1510164107.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:47.025Z,1510164107.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:47.400Z,1510164107.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:47.424Z,1510164107.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:47.792Z,1510164107.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:47.832Z,1510164107.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:48.216Z,1510164108.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:48.232Z,1510164108.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:48.620Z,1510164108.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:48.636Z,1510164108.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:49.009Z,1510164109.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:49.041Z,1510164109.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:49.399Z,1510164109.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:49.431Z,1510164109.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:49.799Z,1510164109.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:49.824Z,1510164109.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:50.196Z,1510164110.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:50.231Z,1510164110.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:50.599Z,1510164110.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:50.624Z,1510164110.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:51.015Z,1510164111.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:51.032Z,1510164111.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:51.420Z,1510164111.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:51.437Z,1510164111.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:51.816Z,1510164111.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:51.832Z,1510164111.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:52.199Z,1510164112.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:52.231Z,1510164112.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:52.599Z,1510164112.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:52.626Z,1510164112.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:52.996Z,1510164112.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:53.031Z,1510164113.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:53.397Z,1510164113.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:53.426Z,1510164113.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:53.800Z,1510164113.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:53.827Z,1510164113.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:54.217Z,1510164114.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:54.233Z,1510164114.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:54.621Z,1510164114.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:54.637Z,1510164114.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:55.022Z,1510164115.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:55.092Z,1510164115.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:55.399Z,1510164115.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:55.432Z,1510164115.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:55.799Z,1510164115.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:55.831Z,1510164115.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:56.200Z,1510164116.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:56.228Z,1510164116.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:56.599Z,1510164116.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:56.652Z,1510164116.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:57.016Z,1510164117.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:57.033Z,1510164117.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:57.420Z,1510164117.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:57.477Z,1510164117.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:57.816Z,1510164117.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:57.834Z,1510164117.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:58.195Z,1510164118.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:58.241Z,1510164118.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:58.599Z,1510164118.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:58.631Z,1510164118.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:58.999Z,1510164118.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:59.030Z,1510164119.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:59.400Z,1510164119.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:59.429Z,1510164119.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:01:59.792Z,1510164119.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:01:59.808Z,1510164119.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:00.210Z,1510164120.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:00.240Z,1510164120.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:00.620Z,1510164120.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:00.639Z,1510164120.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:01.005Z,1510164121.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:01.033Z,1510164121.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:01.399Z,1510164121.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:01.434Z,1510164121.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:01.799Z,1510164121.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:01.834Z,1510164121.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:02.200Z,1510164122.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:02.236Z,1510164122.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:02.595Z,1510164122.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:02.611Z,1510164122.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:03.009Z,1510164123.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:03.039Z,1510164123.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:03.413Z,1510164123.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:03.440Z,1510164123.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:03.810Z,1510164123.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:03.836Z,1510164123.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:04.199Z,1510164124.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:04.241Z,1510164124.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:04.599Z,1510164124.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:04.615Z,1510164124.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:04.999Z,1510164124.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:05.016Z,1510164125.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:05.400Z,1510164125.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:05.446Z,1510164125.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:05.793Z,1510164125.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:05.810Z,1510164125.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:06.210Z,1510164126.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:06.240Z,1510164126.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:06.613Z,1510164126.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:06.668Z,1510164126.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:07.013Z,1510164127.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:07.039Z,1510164127.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:07.399Z,1510164127.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:07.419Z,1510164127.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:07.799Z,1510164127.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:07.819Z,1510164127.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:08.200Z,1510164128.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:08.216Z,1510164128.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:08.599Z,1510164128.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:08.620Z,1510164128.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:09.014Z,1510164129.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:09.038Z,1510164129.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:09.417Z,1510164129.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:09.442Z,1510164129.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:09.814Z,1510164129.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:09.838Z,1510164129.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:10.200Z,1510164130.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:10.216Z,1510164130.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:10.604Z,1510164130.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:10.620Z,1510164130.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:10.999Z,1510164130.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:11.020Z,1510164131.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:11.400Z,1510164131.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:11.417Z,1510164131.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:11.800Z,1510164131.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:11.816Z,1510164131.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:12.210Z,1510164132.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:12.243Z,1510164132.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:12.618Z,1510164132.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:12.649Z,1510164132.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:13.018Z,1510164133.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:13.049Z,1510164133.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:13.402Z,1510164133.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:13.420Z,1510164133.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:13.803Z,1510164133.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:13.824Z,1510164133.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:14.200Z,1510164134.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:14.217Z,1510164134.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:14.599Z,1510164134.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:14.620Z,1510164134.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:15.014Z,1510164135.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:15.053Z,1510164135.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:15.413Z,1510164135.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:15.451Z,1510164135.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:15.810Z,1510164135.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:15.852Z,1510164135.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:16.205Z,1510164136.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:16.225Z,1510164136.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:16.603Z,1510164136.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:16.619Z,1510164136.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:17.001Z,1510164137.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:17.018Z,1510164137.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:17.401Z,1510164137.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:17.459Z,1510164137.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:17.805Z,1510164137.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:17.822Z,1510164137.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:18.210Z,1510164138.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:18.227Z,1510164138.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:18.614Z,1510164138.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:18.630Z,1510164138.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:19.009Z,1510164139.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:19.079Z,1510164139.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:19.405Z,1510164139.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:19.428Z,1510164139.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:19.805Z,1510164139.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:19.828Z,1510164139.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:20.203Z,1510164140.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:20.263Z,1510164140.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:20.601Z,1510164140.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:20.617Z,1510164140.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:21.011Z,1510164141.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:21.067Z,1510164141.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:21.415Z,1510164141.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:21.432Z,1510164141.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:21.815Z,1510164141.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:21.836Z,1510164141.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:22.205Z,1510164142.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:22.222Z,1510164142.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:22.606Z,1510164142.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:22.622Z,1510164142.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:23.001Z,1510164143.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:23.018Z,1510164143.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:23.406Z,1510164143.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:23.423Z,1510164143.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:23.802Z,1510164143.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:23.819Z,1510164143.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:24.214Z,1510164144.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:24.230Z,1510164144.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:24.614Z,1510164144.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:24.636Z,1510164144.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:25.015Z,1510164145.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:25.031Z,1510164145.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:25.402Z,1510164145.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:25.418Z,1510164145.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:25.801Z,1510164145.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:25.818Z,1510164145.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:26.207Z,1510164146.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:26.223Z,1510164146.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:26.602Z,1510164146.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:26.618Z,1510164146.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:27.015Z,1510164147.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:27.036Z,1510164147.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:27.415Z,1510164147.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:27.432Z,1510164147.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:27.815Z,1510164147.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:27.836Z,1510164147.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:28.206Z,1510164148.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:28.224Z,1510164148.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:28.602Z,1510164148.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:28.618Z,1510164148.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:29.002Z,1510164149.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:29.018Z,1510164149.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:29.407Z,1510164149.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:29.464Z,1510164149.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:29.806Z,1510164149.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:29.823Z,1510164149.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:30.215Z,1510164150.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:30.236Z,1510164150.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:30.614Z,1510164150.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:30.636Z,1510164150.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:33.714Z,1510164153.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:33.731Z,1510164153.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:33.858Z,1510164153.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:33.905Z,1510164153.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:34.263Z,1510164154.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:34.284Z,1510164154.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:34.659Z,1510164154.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:34.730Z,1510164154.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:35.067Z,1510164155.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:35.083Z,1510164155.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:35.466Z,1510164155.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:35.483Z,1510164155.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:35.867Z,1510164155.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:35.883Z,1510164155.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:36.250Z,1510164156.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:36.281Z,1510164156.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:36.663Z,1510164156.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:36.679Z,1510164156.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:37.055Z,1510164157.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:37.071Z,1510164157.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:37.459Z,1510164157.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:37.476Z,1510164157.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:37.850Z,1510164157.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:37.882Z,1510164157.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:38.268Z,1510164158.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:38.284Z,1510164158.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:38.667Z,1510164158.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:38.683Z,1510164158.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:39.069Z,1510164159.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:39.085Z,1510164159.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:39.447Z,1510164159.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:39.475Z,1510164159.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:39.847Z,1510164159.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:39.885Z,1510164159.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:40.252Z,1510164160.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:40.307Z,1510164160.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:40.647Z,1510164160.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:40.677Z,1510164160.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:41.062Z,1510164161.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:41.126Z,1510164161.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:41.472Z,1510164161.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:41.489Z,1510164161.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:41.873Z,1510164161.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:41.928Z,1510164161.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:42.248Z,1510164162.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:42.264Z,1510164162.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:42.651Z,1510164162.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:42.667Z,1510164162.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:43.047Z,1510164163.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:43.064Z,1510164163.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:43.448Z,1510164163.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:43.464Z,1510164163.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:43.852Z,1510164163.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:43.868Z,1510164163.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:44.261Z,1510164164.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:44.290Z,1510164164.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:44.669Z,1510164164.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:44.696Z,1510164164.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:45.070Z,1510164165.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:45.096Z,1510164165.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:45.455Z,1510164165.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:45.472Z,1510164165.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:45.850Z,1510164165.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:45.867Z,1510164165.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:46.255Z,1510164166.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:46.276Z,1510164166.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:46.650Z,1510164166.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:46.666Z,1510164166.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:47.062Z,1510164167.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:47.078Z,1510164167.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:47.465Z,1510164167.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:47.502Z,1510164167.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:47.861Z,1510164167.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:47.878Z,1510164167.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:48.253Z,1510164168.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:48.269Z,1510164168.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:48.655Z,1510164168.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:48.671Z,1510164168.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:49.054Z,1510164169.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:49.070Z,1510164169.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:49.453Z,1510164169.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:49.469Z,1510164169.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:49.855Z,1510164169.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:49.876Z,1510164169.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:50.265Z,1510164170.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:50.315Z,1510164170.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:50.661Z,1510164170.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:50.678Z,1510164170.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:51.066Z,1510164171.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:51.098Z,1510164171.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:51.453Z,1510164171.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:51.470Z,1510164171.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:51.853Z,1510164171.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:51.869Z,1510164171.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:52.255Z,1510164172.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:52.275Z,1510164172.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:52.653Z,1510164172.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:52.669Z,1510164172.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:53.062Z,1510164173.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:53.078Z,1510164173.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:53.465Z,1510164173.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:53.482Z,1510164173.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:53.865Z,1510164173.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:53.882Z,1510164173.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:54.258Z,1510164174.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:54.274Z,1510164174.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:54.656Z,1510164174.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:54.677Z,1510164174.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:54.761Z,1510164174.761 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T18:02:55.055Z,1510164175.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:55.072Z,1510164175.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:55.455Z,1510164175.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:55.472Z,1510164175.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:55.857Z,1510164175.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:55.874Z,1510164175.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:56.266Z,1510164176.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:56.282Z,1510164176.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:56.662Z,1510164176.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:56.679Z,1510164176.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:57.062Z,1510164177.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:57.079Z,1510164177.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:57.455Z,1510164177.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:57.472Z,1510164177.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:57.854Z,1510164177.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:57.871Z,1510164177.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:58.259Z,1510164178.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:58.276Z,1510164178.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:58.654Z,1510164178.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:58.671Z,1510164178.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:59.062Z,1510164179.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:59.078Z,1510164179.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:59.465Z,1510164179.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:59.482Z,1510164179.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:02:59.862Z,1510164179.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:02:59.884Z,1510164179.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:00.257Z,1510164180.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:00.274Z,1510164180.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:00.652Z,1510164180.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:00.715Z,1510164180.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:01.054Z,1510164181.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:01.127Z,1510164181.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:01.454Z,1510164181.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:01.472Z,1510164181.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:01.857Z,1510164181.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:01.874Z,1510164181.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:02.263Z,1510164182.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:02.319Z,1510164182.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:02.662Z,1510164182.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:02.680Z,1510164182.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:03.062Z,1510164183.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:03.116Z,1510164183.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:03.458Z,1510164183.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:03.474Z,1510164183.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:03.854Z,1510164183.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:03.870Z,1510164183.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:04.257Z,1510164184.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:04.273Z,1510164184.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:04.654Z,1510164184.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:04.670Z,1510164184.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:05.066Z,1510164185.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:05.082Z,1510164185.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:05.466Z,1510164185.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:05.482Z,1510164185.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:05.867Z,1510164185.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:05.883Z,1510164185.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:06.254Z,1510164186.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:06.270Z,1510164186.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:06.657Z,1510164186.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:06.673Z,1510164186.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:07.054Z,1510164187.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:07.070Z,1510164187.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:07.453Z,1510164187.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:07.469Z,1510164187.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:07.857Z,1510164187.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:07.872Z,1510164187.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:08.267Z,1510164188.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:08.283Z,1510164188.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:08.666Z,1510164188.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:08.682Z,1510164188.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:09.066Z,1510164189.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:09.081Z,1510164189.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:09.454Z,1510164189.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:09.470Z,1510164189.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:09.850Z,1510164189.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:09.881Z,1510164189.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:10.254Z,1510164190.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:10.269Z,1510164190.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:10.654Z,1510164190.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:10.670Z,1510164190.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:11.066Z,1510164191.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:11.082Z,1510164191.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:11.466Z,1510164191.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:11.515Z,1510164191.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:11.867Z,1510164191.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:11.883Z,1510164191.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:12.253Z,1510164192.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:12.270Z,1510164192.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:12.653Z,1510164192.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:12.675Z,1510164192.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:13.058Z,1510164193.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:13.075Z,1510164193.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:13.450Z,1510164193.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:13.482Z,1510164193.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:13.854Z,1510164193.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:13.875Z,1510164193.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:14.267Z,1510164194.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:14.284Z,1510164194.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:14.666Z,1510164194.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:14.682Z,1510164194.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:15.067Z,1510164195.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:15.082Z,1510164195.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:15.454Z,1510164195.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:15.471Z,1510164195.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:15.858Z,1510164195.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:15.874Z,1510164195.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:16.262Z,1510164196.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:16.278Z,1510164196.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:16.655Z,1510164196.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:16.671Z,1510164196.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:17.065Z,1510164197.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:17.081Z,1510164197.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:17.466Z,1510164197.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:17.482Z,1510164197.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:17.868Z,1510164197.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:17.892Z,1510164197.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:18.251Z,1510164198.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:18.281Z,1510164198.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:18.655Z,1510164198.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:18.677Z,1510164198.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:19.058Z,1510164199.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:19.076Z,1510164199.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:19.447Z,1510164199.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:19.479Z,1510164199.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:19.857Z,1510164199.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:19.874Z,1510164199.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:20.271Z,1510164200.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:20.296Z,1510164200.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:20.670Z,1510164200.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:20.692Z,1510164200.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:21.067Z,1510164201.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:21.084Z,1510164201.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:21.458Z,1510164201.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:21.478Z,1510164201.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:21.848Z,1510164201.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:21.905Z,1510164201.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:22.258Z,1510164202.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:22.294Z,1510164202.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:22.648Z,1510164202.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:22.679Z,1510164202.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:23.067Z,1510164203.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:23.127Z,1510164203.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:23.470Z,1510164203.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:23.491Z,1510164203.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:23.871Z,1510164203.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:23.923Z,1510164203.923 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:23.923Z,1510164203.923 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93
2017-11-08T18:03:23.924Z,1510164203.924 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T18:03:23.925Z,1510164203.925 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:23.926Z,1510164203.926 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93
2017-11-08T18:03:23.926Z,1510164203.926 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T18:03:23.927Z,1510164203.927 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:23.927Z,1510164203.927 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 93
2017-11-08T18:03:23.927Z,1510164203.927 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T18:03:24.010Z,1510164204.010 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T18:03:24.010Z,1510164204.010 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T18:03:24.010Z,1510164204.010 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T18:03:24.247Z,1510164204.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:24.349Z,1510164204.349 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T18:03:24.349Z,1510164204.349 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93
2017-11-08T18:03:24.349Z,1510164204.349 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T18:03:24.349Z,1510164204.349 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93
2017-11-08T18:03:24.350Z,1510164204.350 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T18:03:24.350Z,1510164204.350 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 93
2017-11-08T18:03:24.647Z,1510164204.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:24.671Z,1510164204.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T18:03:24.671Z,1510164204.671 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:03:24.671Z,1510164204.671 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:03:24.672Z,1510164204.672 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T18:03:24.672Z,1510164204.672 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:03:24.672Z,1510164204.672 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:03:24.673Z,1510164204.673 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T18:03:24.673Z,1510164204.673 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:03:24.674Z,1510164204.674 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:03:25.047Z,1510164205.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:25.079Z,1510164205.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T18:03:25.080Z,1510164205.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:25.448Z,1510164205.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:25.479Z,1510164205.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T18:03:25.480Z,1510164205.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:25.851Z,1510164205.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:25.882Z,1510164205.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T18:03:25.883Z,1510164205.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:26.273Z,1510164206.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:26.289Z,1510164206.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T18:03:26.290Z,1510164206.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:26.672Z,1510164206.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:26.688Z,1510164206.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T18:03:26.689Z,1510164206.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:27.057Z,1510164207.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:27.087Z,1510164207.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T18:03:27.088Z,1510164207.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:27.452Z,1510164207.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:27.483Z,1510164207.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T18:03:27.484Z,1510164207.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:27.847Z,1510164207.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:27.867Z,1510164207.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-11-08T18:03:27.868Z,1510164207.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:28.252Z,1510164208.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:28.295Z,1510164208.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T18:03:28.296Z,1510164208.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:28.652Z,1510164208.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:28.668Z,1510164208.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2017-11-08T18:03:28.669Z,1510164208.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:29.066Z,1510164209.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:29.097Z,1510164209.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T18:03:29.098Z,1510164209.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:29.469Z,1510164209.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:29.495Z,1510164209.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T18:03:29.496Z,1510164209.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:29.870Z,1510164209.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:29.896Z,1510164209.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T18:03:29.897Z,1510164209.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:30.255Z,1510164210.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:30.272Z,1510164210.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2017-11-08T18:03:30.273Z,1510164210.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:30.655Z,1510164210.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:30.670Z,1510164210.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2017-11-08T18:03:30.671Z,1510164210.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:33.746Z,1510164213.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:33.804Z,1510164213.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2017-11-08T18:03:33.805Z,1510164213.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:33.915Z,1510164213.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:33.944Z,1510164213.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T18:03:33.945Z,1510164213.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:34.332Z,1510164214.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:34.348Z,1510164214.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T18:03:34.349Z,1510164214.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:34.736Z,1510164214.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:34.759Z,1510164214.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T18:03:34.760Z,1510164214.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:35.122Z,1510164215.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:35.153Z,1510164215.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T18:03:35.154Z,1510164215.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:35.511Z,1510164215.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:35.545Z,1510164215.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T18:03:35.546Z,1510164215.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:35.912Z,1510164215.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:35.943Z,1510164215.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T18:03:35.944Z,1510164215.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:36.308Z,1510164216.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:36.347Z,1510164216.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T18:03:36.348Z,1510164216.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:36.711Z,1510164216.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:36.726Z,1510164216.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T18:03:36.727Z,1510164216.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:37.126Z,1510164217.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:37.152Z,1510164217.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T18:03:37.153Z,1510164217.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:37.526Z,1510164217.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:37.551Z,1510164217.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T18:03:37.552Z,1510164217.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:37.922Z,1510164217.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:37.953Z,1510164217.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T18:03:37.954Z,1510164217.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:38.312Z,1510164218.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:38.327Z,1510164218.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T18:03:38.329Z,1510164218.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:38.711Z,1510164218.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:38.731Z,1510164218.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T18:03:38.732Z,1510164218.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:39.115Z,1510164219.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:39.135Z,1510164219.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T18:03:39.136Z,1510164219.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:39.512Z,1510164219.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:39.535Z,1510164219.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T18:03:39.536Z,1510164219.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:39.915Z,1510164219.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:39.935Z,1510164219.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T18:03:39.936Z,1510164219.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:40.325Z,1510164220.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:40.363Z,1510164220.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T18:03:40.363Z,1510164220.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:40.729Z,1510164220.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:40.761Z,1510164220.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T18:03:40.762Z,1510164220.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:41.126Z,1510164221.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:41.160Z,1510164221.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T18:03:41.161Z,1510164221.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:41.515Z,1510164221.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:41.531Z,1510164221.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T18:03:41.532Z,1510164221.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:41.915Z,1510164221.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:41.939Z,1510164221.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T18:03:41.940Z,1510164221.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:42.315Z,1510164222.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:42.335Z,1510164222.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T18:03:42.336Z,1510164222.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:42.719Z,1510164222.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:42.739Z,1510164222.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T18:03:42.740Z,1510164222.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:43.122Z,1510164223.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:43.138Z,1510164223.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T18:03:43.139Z,1510164223.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:43.526Z,1510164223.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:43.542Z,1510164223.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T18:03:43.543Z,1510164223.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:43.922Z,1510164223.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:43.939Z,1510164223.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:44.314Z,1510164224.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:44.331Z,1510164224.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:44.711Z,1510164224.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:44.768Z,1510164224.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:45.118Z,1510164225.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:45.139Z,1510164225.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:45.515Z,1510164225.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:45.532Z,1510164225.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:45.917Z,1510164225.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:45.934Z,1510164225.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:46.322Z,1510164226.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:46.339Z,1510164226.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:46.723Z,1510164226.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:46.740Z,1510164226.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:47.122Z,1510164227.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:47.144Z,1510164227.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:47.516Z,1510164227.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:47.532Z,1510164227.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:47.914Z,1510164227.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:47.930Z,1510164227.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:48.318Z,1510164228.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:48.334Z,1510164228.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:48.717Z,1510164228.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:48.732Z,1510164228.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:49.123Z,1510164229.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:49.131Z,1510164229.131 [BPC1](ERROR): Failed to receive battery data
2017-11-08T18:03:49.131Z,1510164229.131 [BPC1] Communications Fault, FailCount= 1
2017-11-08T18:03:49.131Z,1510164229.131 [BPC1](ERROR): Communications Fault
2017-11-08T18:03:49.141Z,1510164229.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:49.218Z,1510164229.218 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T18:03:49.527Z,1510164229.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:49.544Z,1510164229.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:49.927Z,1510164229.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:49.943Z,1510164229.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:50.307Z,1510164230.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:50.341Z,1510164230.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:50.417Z,1510164230.417 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T18:03:50.417Z,1510164230.417 [BPC1] No Fault, FailCount= 1
2017-11-08T18:03:50.707Z,1510164230.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:50.788Z,1510164230.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:51.117Z,1510164231.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:51.132Z,1510164231.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:51.518Z,1510164231.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:51.535Z,1510164231.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:51.915Z,1510164231.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:51.943Z,1510164231.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:52.326Z,1510164232.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:52.342Z,1510164232.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:52.728Z,1510164232.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:52.744Z,1510164232.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:53.131Z,1510164233.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:53.147Z,1510164233.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:53.507Z,1510164233.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:53.537Z,1510164233.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:53.907Z,1510164233.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:53.943Z,1510164233.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:54.308Z,1510164234.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:54.333Z,1510164234.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:54.711Z,1510164234.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:54.747Z,1510164234.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:55.133Z,1510164235.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:55.149Z,1510164235.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:55.532Z,1510164235.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:55.548Z,1510164235.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:55.921Z,1510164235.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:55.951Z,1510164235.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:56.307Z,1510164236.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:56.324Z,1510164236.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:56.707Z,1510164236.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:56.727Z,1510164236.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:57.111Z,1510164237.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:57.151Z,1510164237.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:57.508Z,1510164237.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:57.524Z,1510164237.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:57.907Z,1510164237.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:57.928Z,1510164237.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:58.317Z,1510164238.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:58.354Z,1510164238.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:58.721Z,1510164238.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:58.746Z,1510164238.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:59.126Z,1510164239.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:59.165Z,1510164239.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:59.515Z,1510164239.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:59.535Z,1510164239.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:03:59.915Z,1510164239.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:03:59.931Z,1510164239.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:00.313Z,1510164240.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:00.329Z,1510164240.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:00.715Z,1510164240.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:00.731Z,1510164240.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:01.129Z,1510164241.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:01.157Z,1510164241.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:01.529Z,1510164241.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:01.557Z,1510164241.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:01.926Z,1510164241.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:01.958Z,1510164241.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:02.308Z,1510164242.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:02.325Z,1510164242.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:02.714Z,1510164242.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:02.731Z,1510164242.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:03.114Z,1510164243.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:03.130Z,1510164243.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:03.514Z,1510164243.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:03.532Z,1510164243.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:03.914Z,1510164243.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:03.931Z,1510164243.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:04.325Z,1510164244.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:04.357Z,1510164244.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:04.721Z,1510164244.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:04.746Z,1510164244.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:05.126Z,1510164245.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:05.162Z,1510164245.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:05.513Z,1510164245.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:05.530Z,1510164245.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:05.913Z,1510164245.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:05.929Z,1510164245.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:06.315Z,1510164246.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:06.336Z,1510164246.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:06.714Z,1510164246.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:06.730Z,1510164246.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:07.125Z,1510164247.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:07.142Z,1510164247.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:07.526Z,1510164247.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:07.542Z,1510164247.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:07.921Z,1510164247.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:07.943Z,1510164247.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:08.317Z,1510164248.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:08.334Z,1510164248.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:08.717Z,1510164248.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:08.733Z,1510164248.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:09.117Z,1510164249.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:09.134Z,1510164249.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:09.515Z,1510164249.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:09.531Z,1510164249.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:09.917Z,1510164249.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:09.990Z,1510164249.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:10.322Z,1510164250.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:10.344Z,1510164250.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:10.725Z,1510164250.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:10.747Z,1510164250.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:11.126Z,1510164251.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:11.195Z,1510164251.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:11.515Z,1510164251.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:11.536Z,1510164251.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:11.918Z,1510164251.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:11.973Z,1510164251.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:12.318Z,1510164252.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:12.334Z,1510164252.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:12.717Z,1510164252.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:12.773Z,1510164252.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:13.128Z,1510164253.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:13.144Z,1510164253.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:13.530Z,1510164253.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:13.546Z,1510164253.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:13.930Z,1510164253.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:13.947Z,1510164253.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:14.307Z,1510164254.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:14.334Z,1510164254.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:14.717Z,1510164254.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:14.734Z,1510164254.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:15.107Z,1510164255.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:15.140Z,1510164255.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:15.519Z,1510164255.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:15.535Z,1510164255.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:15.907Z,1510164255.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:15.938Z,1510164255.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:16.327Z,1510164256.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:16.344Z,1510164256.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:16.731Z,1510164256.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:16.747Z,1510164256.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:17.131Z,1510164257.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:17.151Z,1510164257.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:17.521Z,1510164257.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:17.537Z,1510164257.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:17.919Z,1510164257.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:17.935Z,1510164257.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:18.308Z,1510164258.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:18.345Z,1510164258.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:18.711Z,1510164258.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:18.746Z,1510164258.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:19.133Z,1510164259.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:19.149Z,1510164259.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:19.526Z,1510164259.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:19.548Z,1510164259.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:19.926Z,1510164259.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:19.948Z,1510164259.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:20.311Z,1510164260.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:20.355Z,1510164260.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:20.711Z,1510164260.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:20.744Z,1510164260.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:21.111Z,1510164261.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:21.160Z,1510164261.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:21.509Z,1510164261.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:21.545Z,1510164261.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:21.912Z,1510164261.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:21.944Z,1510164261.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:22.322Z,1510164262.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:22.349Z,1510164262.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:22.725Z,1510164262.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:22.760Z,1510164262.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:23.122Z,1510164263.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:23.152Z,1510164263.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:23.512Z,1510164263.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:23.528Z,1510164263.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:23.907Z,1510164263.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:23.925Z,1510164263.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:24.308Z,1510164264.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:24.325Z,1510164264.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:24.711Z,1510164264.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:24.728Z,1510164264.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:25.121Z,1510164265.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:25.151Z,1510164265.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:25.525Z,1510164265.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:25.563Z,1510164265.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:25.926Z,1510164265.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:25.958Z,1510164265.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:26.317Z,1510164266.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:26.333Z,1510164266.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:26.713Z,1510164266.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:26.729Z,1510164266.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:27.116Z,1510164267.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:27.132Z,1510164267.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:27.514Z,1510164267.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:27.531Z,1510164267.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:27.913Z,1510164267.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:27.929Z,1510164267.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:28.322Z,1510164268.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:28.338Z,1510164268.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:28.721Z,1510164268.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:28.738Z,1510164268.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:29.122Z,1510164269.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:29.138Z,1510164269.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:29.515Z,1510164269.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:29.536Z,1510164269.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:29.914Z,1510164269.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:29.931Z,1510164269.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:30.317Z,1510164270.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:30.333Z,1510164270.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:30.718Z,1510164270.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:30.735Z,1510164270.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:33.952Z,1510164273.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:34.028Z,1510164274.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:34.172Z,1510164274.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:34.189Z,1510164274.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:34.560Z,1510164274.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:34.577Z,1510164274.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:34.943Z,1510164274.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:34.992Z,1510164274.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:35.339Z,1510164275.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:35.372Z,1510164275.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:35.743Z,1510164275.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:35.791Z,1510164275.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:36.165Z,1510164276.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:36.182Z,1510164276.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:36.564Z,1510164276.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:36.581Z,1510164276.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:36.954Z,1510164276.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:36.980Z,1510164276.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:37.343Z,1510164277.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:37.379Z,1510164277.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:37.743Z,1510164277.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:37.760Z,1510164277.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:38.144Z,1510164278.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:38.188Z,1510164278.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:38.539Z,1510164278.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:38.574Z,1510164278.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:38.960Z,1510164278.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:38.977Z,1510164278.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:39.363Z,1510164279.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:39.380Z,1510164279.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:39.761Z,1510164279.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:39.777Z,1510164279.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:40.140Z,1510164280.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:40.175Z,1510164280.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:40.547Z,1510164280.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:40.576Z,1510164280.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:40.965Z,1510164280.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:40.982Z,1510164280.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:41.364Z,1510164281.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:41.381Z,1510164281.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:41.758Z,1510164281.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:41.781Z,1510164281.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:42.144Z,1510164282.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:42.172Z,1510164282.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:42.540Z,1510164282.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:42.575Z,1510164282.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:42.965Z,1510164282.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:42.988Z,1510164282.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:43.362Z,1510164283.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:43.379Z,1510164283.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:43.760Z,1510164283.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:43.777Z,1510164283.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:44.145Z,1510164284.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:44.217Z,1510164284.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:44.544Z,1510164284.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:44.573Z,1510164284.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:44.961Z,1510164284.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:44.978Z,1510164284.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:45.355Z,1510164285.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:45.395Z,1510164285.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:45.761Z,1510164285.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:45.778Z,1510164285.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:46.140Z,1510164286.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:46.175Z,1510164286.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:46.543Z,1510164286.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:46.569Z,1510164286.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:46.964Z,1510164286.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:46.982Z,1510164286.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:47.358Z,1510164287.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:47.376Z,1510164287.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:47.760Z,1510164287.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:47.777Z,1510164287.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:48.140Z,1510164288.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:48.177Z,1510164288.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:48.539Z,1510164288.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:48.574Z,1510164288.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:48.960Z,1510164288.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:48.977Z,1510164288.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:49.364Z,1510164289.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:49.381Z,1510164289.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:49.760Z,1510164289.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:49.777Z,1510164289.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:50.144Z,1510164290.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:50.179Z,1510164290.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:50.539Z,1510164290.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:50.568Z,1510164290.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:50.954Z,1510164290.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:50.980Z,1510164290.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:51.364Z,1510164291.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:51.388Z,1510164291.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:51.753Z,1510164291.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:51.787Z,1510164291.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:52.140Z,1510164292.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:52.156Z,1510164292.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:52.544Z,1510164292.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:52.577Z,1510164292.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:52.943Z,1510164292.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:52.960Z,1510164292.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:53.354Z,1510164293.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:53.385Z,1510164293.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:53.758Z,1510164293.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:53.782Z,1510164293.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:54.157Z,1510164294.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:54.185Z,1510164294.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:54.542Z,1510164294.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:54.559Z,1510164294.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:54.942Z,1510164294.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:55.007Z,1510164295.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:55.347Z,1510164295.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:55.368Z,1510164295.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:55.746Z,1510164295.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:55.762Z,1510164295.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:56.158Z,1510164296.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:56.215Z,1510164296.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:56.553Z,1510164296.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:56.570Z,1510164296.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:56.958Z,1510164296.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:57.011Z,1510164297.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:57.346Z,1510164297.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:57.363Z,1510164297.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:57.745Z,1510164297.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:57.799Z,1510164297.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:58.144Z,1510164298.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:58.164Z,1510164298.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:58.547Z,1510164298.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:58.563Z,1510164298.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:58.952Z,1510164298.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:58.970Z,1510164298.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:59.358Z,1510164299.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:59.391Z,1510164299.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:04:59.758Z,1510164299.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:04:59.775Z,1510164299.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:00.147Z,1510164300.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:00.163Z,1510164300.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:00.544Z,1510164300.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:00.561Z,1510164300.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:00.958Z,1510164300.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:00.975Z,1510164300.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:01.357Z,1510164301.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:01.374Z,1510164301.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:01.761Z,1510164301.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:01.795Z,1510164301.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:02.150Z,1510164302.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:02.166Z,1510164302.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:02.546Z,1510164302.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:02.566Z,1510164302.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:02.955Z,1510164302.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:02.972Z,1510164302.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:03.355Z,1510164303.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:03.372Z,1510164303.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:03.755Z,1510164303.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:03.772Z,1510164303.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:04.142Z,1510164304.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:04.168Z,1510164304.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:04.550Z,1510164304.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:04.566Z,1510164304.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:04.961Z,1510164304.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:04.978Z,1510164304.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:05.360Z,1510164305.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:05.377Z,1510164305.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:05.762Z,1510164305.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:05.791Z,1510164305.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:06.140Z,1510164306.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:06.219Z,1510164306.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:06.551Z,1510164306.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:06.578Z,1510164306.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:06.962Z,1510164306.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:06.988Z,1510164306.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:07.359Z,1510164307.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:07.391Z,1510164307.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:07.756Z,1510164307.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:07.794Z,1510164307.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:08.159Z,1510164308.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:08.183Z,1510164308.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:08.547Z,1510164308.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:08.563Z,1510164308.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:08.954Z,1510164308.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:08.986Z,1510164308.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:09.358Z,1510164309.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:09.390Z,1510164309.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:09.757Z,1510164309.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:09.774Z,1510164309.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:10.149Z,1510164310.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:10.166Z,1510164310.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:10.548Z,1510164310.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:10.564Z,1510164310.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:10.952Z,1510164310.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:10.970Z,1510164310.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:11.353Z,1510164311.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:11.419Z,1510164311.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:11.754Z,1510164311.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:11.776Z,1510164311.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:12.146Z,1510164312.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:12.163Z,1510164312.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:12.543Z,1510164312.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:12.564Z,1510164312.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:12.954Z,1510164312.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:12.976Z,1510164312.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:13.355Z,1510164313.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:13.376Z,1510164313.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:13.754Z,1510164313.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:13.772Z,1510164313.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:14.150Z,1510164314.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:14.166Z,1510164314.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:14.546Z,1510164314.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:14.562Z,1510164314.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:14.954Z,1510164314.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:14.976Z,1510164314.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:15.358Z,1510164315.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:15.374Z,1510164315.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:15.755Z,1510164315.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:15.772Z,1510164315.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:16.143Z,1510164316.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:16.176Z,1510164316.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:16.549Z,1510164316.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:16.572Z,1510164316.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:16.959Z,1510164316.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:16.984Z,1510164316.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:17.359Z,1510164317.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:17.376Z,1510164317.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:17.759Z,1510164317.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:17.776Z,1510164317.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:18.147Z,1510164318.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:18.188Z,1510164318.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:18.549Z,1510164318.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:18.566Z,1510164318.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:18.959Z,1510164318.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:18.976Z,1510164318.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:19.360Z,1510164319.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:19.419Z,1510164319.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:19.761Z,1510164319.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:19.777Z,1510164319.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:20.151Z,1510164320.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:20.209Z,1510164320.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:20.550Z,1510164320.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:20.567Z,1510164320.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:20.961Z,1510164320.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:20.977Z,1510164320.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:21.363Z,1510164321.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:21.380Z,1510164321.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:21.761Z,1510164321.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:21.778Z,1510164321.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:22.149Z,1510164322.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:22.166Z,1510164322.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:22.550Z,1510164322.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:22.567Z,1510164322.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:22.970Z,1510164322.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:22.990Z,1510164322.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:23.370Z,1510164323.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:23.386Z,1510164323.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:23.774Z,1510164323.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:23.799Z,1510164323.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:24.140Z,1510164324.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:24.173Z,1510164324.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:24.554Z,1510164324.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:24.591Z,1510164324.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:24.955Z,1510164324.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:24.987Z,1510164324.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:25.353Z,1510164325.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:25.384Z,1510164325.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:25.758Z,1510164325.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:25.793Z,1510164325.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:26.148Z,1510164326.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:26.168Z,1510164326.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:26.546Z,1510164326.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:26.563Z,1510164326.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:26.954Z,1510164326.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:26.970Z,1510164326.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:27.357Z,1510164327.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:27.374Z,1510164327.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:27.757Z,1510164327.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:27.773Z,1510164327.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:28.146Z,1510164328.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:28.165Z,1510164328.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:28.560Z,1510164328.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:28.608Z,1510164328.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:28.954Z,1510164328.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:28.971Z,1510164328.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:29.383Z,1510164329.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:29.408Z,1510164329.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:29.754Z,1510164329.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:29.776Z,1510164329.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:30.147Z,1510164330.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:30.163Z,1510164330.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:30.546Z,1510164330.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:30.578Z,1510164330.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:30.959Z,1510164330.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:30.976Z,1510164330.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:31.364Z,1510164331.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:31.381Z,1510164331.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:31.762Z,1510164331.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:31.779Z,1510164331.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:35.221Z,1510164335.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:35.238Z,1510164335.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:35.267Z,1510164335.267 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T18:00:33.6Z
2017-11-08T18:05:35.267Z,1510164335.267 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T18:05:35.267Z,1510164335.267 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T18:05:35.376Z,1510164335.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:35.423Z,1510164335.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:36.076Z,1510164336.076 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171108T132236/Courier0060.lzma
2017-11-08T18:05:36.136Z,1510164336.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:36.176Z,1510164336.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:36.314Z,1510164336.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:36.359Z,1510164336.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:36.668Z,1510164336.668 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0060.lzma.bak
2017-11-08T18:05:36.669Z,1510164336.669 [DataOverHttps](INFO): SBD MOMSN=5223172
2017-11-08T18:05:36.729Z,1510164336.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:36.759Z,1510164336.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:37.675Z,1510164337.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:37.691Z,1510164337.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:37.794Z,1510164337.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:37.831Z,1510164337.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:38.216Z,1510164338.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:38.240Z,1510164338.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:38.616Z,1510164338.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:38.636Z,1510164338.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:41.981Z,1510164341.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:42.118Z,1510164342.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:42.258Z,1510164342.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:42.291Z,1510164342.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:42.670Z,1510164342.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:42.687Z,1510164342.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:43.066Z,1510164343.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:43.123Z,1510164343.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:43.466Z,1510164343.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:43.483Z,1510164343.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:43.866Z,1510164343.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:43.917Z,1510164343.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:44.270Z,1510164344.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:44.292Z,1510164344.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:44.674Z,1510164344.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:44.690Z,1510164344.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:45.075Z,1510164345.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:45.099Z,1510164345.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:48.216Z,1510164348.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:48.233Z,1510164348.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:48.339Z,1510164348.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:48.383Z,1510164348.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:48.725Z,1510164348.725 [DataOverHttps](INFO): Sending 220 bytes from file Logs/20171108T132236/Express0061.lzma
2017-11-08T18:05:48.842Z,1510164348.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:48.967Z,1510164348.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:49.171Z,1510164349.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:49.227Z,1510164349.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:49.522Z,1510164349.522 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0061.lzma.bak
2017-11-08T18:05:49.522Z,1510164349.522 [DataOverHttps](INFO): SBD MOMSN=5223174
2017-11-08T18:05:49.581Z,1510164349.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:49.604Z,1510164349.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:50.495Z,1510164350.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:50.566Z,1510164350.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:50.570Z,1510164350.570 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T18:05:50.570Z,1510164350.570 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T18:05:50.570Z,1510164350.570 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T18:05:50.685Z,1510164350.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:50.725Z,1510164350.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:53.889Z,1510164353.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:53.938Z,1510164353.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:54.058Z,1510164354.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:54.087Z,1510164354.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:54.472Z,1510164354.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:54.488Z,1510164354.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:54.856Z,1510164354.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:54.890Z,1510164354.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:55.256Z,1510164355.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:55.290Z,1510164355.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:55.655Z,1510164355.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:55.692Z,1510164355.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:56.069Z,1510164356.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:56.097Z,1510164356.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:56.466Z,1510164356.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:56.496Z,1510164356.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:56.866Z,1510164356.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:56.896Z,1510164356.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:57.261Z,1510164357.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:57.301Z,1510164357.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:57.651Z,1510164357.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:57.667Z,1510164357.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:58.054Z,1510164358.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:58.071Z,1510164358.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:58.452Z,1510164358.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:58.468Z,1510164358.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:58.851Z,1510164358.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:58.867Z,1510164358.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:59.262Z,1510164359.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:59.279Z,1510164359.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:05:59.665Z,1510164359.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:05:59.705Z,1510164359.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:00.065Z,1510164360.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:00.093Z,1510164360.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:00.457Z,1510164360.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:00.483Z,1510164360.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:00.865Z,1510164360.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:00.881Z,1510164360.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:01.254Z,1510164361.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:01.276Z,1510164361.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:01.660Z,1510164361.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:01.677Z,1510164361.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:02.066Z,1510164362.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:02.087Z,1510164362.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:02.462Z,1510164362.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:02.483Z,1510164362.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:02.862Z,1510164362.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:02.884Z,1510164362.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:03.261Z,1510164363.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:03.277Z,1510164363.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:03.654Z,1510164363.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:03.670Z,1510164363.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:04.060Z,1510164364.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:04.076Z,1510164364.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:04.459Z,1510164364.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:04.474Z,1510164364.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:04.857Z,1510164364.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:04.874Z,1510164364.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:05.263Z,1510164365.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:05.279Z,1510164365.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:05.666Z,1510164365.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:05.681Z,1510164365.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:06.063Z,1510164366.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:06.074Z,1510164366.074 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T18:06:06.074Z,1510164366.074 [BPC1] Data Fault, FailCount= 1
2017-11-08T18:06:06.074Z,1510164366.074 [BPC1](ERROR): Data Fault
2017-11-08T18:06:06.084Z,1510164366.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:06.177Z,1510164366.177 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T18:06:06.457Z,1510164366.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:06.474Z,1510164366.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:06.858Z,1510164366.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:06.874Z,1510164366.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:07.258Z,1510164367.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:07.280Z,1510164367.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:07.361Z,1510164367.361 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T18:06:07.361Z,1510164367.361 [BPC1] No Fault, FailCount= 1
2017-11-08T18:06:07.658Z,1510164367.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:07.724Z,1510164367.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:08.069Z,1510164368.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:08.086Z,1510164368.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:08.466Z,1510164368.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:08.483Z,1510164368.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:08.867Z,1510164368.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:08.883Z,1510164368.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:09.254Z,1510164369.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:09.270Z,1510164369.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:09.654Z,1510164369.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:09.671Z,1510164369.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:10.055Z,1510164370.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:10.076Z,1510164370.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:10.460Z,1510164370.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:10.476Z,1510164370.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:10.850Z,1510164370.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:10.873Z,1510164370.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:11.267Z,1510164371.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:11.283Z,1510164371.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:11.667Z,1510164371.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:11.683Z,1510164371.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:12.065Z,1510164372.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:12.081Z,1510164372.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:12.455Z,1510164372.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:12.486Z,1510164372.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:12.858Z,1510164372.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:12.875Z,1510164372.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:13.258Z,1510164373.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:13.275Z,1510164373.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:13.658Z,1510164373.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:13.681Z,1510164373.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:14.067Z,1510164374.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:14.083Z,1510164374.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:14.466Z,1510164374.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:14.483Z,1510164374.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:14.866Z,1510164374.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:14.882Z,1510164374.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:15.258Z,1510164375.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:15.274Z,1510164375.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:15.650Z,1510164375.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:15.681Z,1510164375.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:16.055Z,1510164376.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:16.107Z,1510164376.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:16.454Z,1510164376.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:16.470Z,1510164376.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:16.857Z,1510164376.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:16.879Z,1510164376.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:17.266Z,1510164377.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:17.288Z,1510164377.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:17.670Z,1510164377.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:17.685Z,1510164377.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:18.067Z,1510164378.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:18.087Z,1510164378.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:18.455Z,1510164378.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:18.488Z,1510164378.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:18.847Z,1510164378.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:18.882Z,1510164378.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:19.258Z,1510164379.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:19.274Z,1510164379.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:19.657Z,1510164379.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:19.673Z,1510164379.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:20.071Z,1510164380.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:20.087Z,1510164380.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:20.467Z,1510164380.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:20.484Z,1510164380.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:20.871Z,1510164380.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:20.892Z,1510164380.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:21.258Z,1510164381.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:21.274Z,1510164381.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:21.647Z,1510164381.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:21.682Z,1510164381.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:22.055Z,1510164382.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:22.076Z,1510164382.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:22.463Z,1510164382.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:22.478Z,1510164382.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:22.847Z,1510164382.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:22.872Z,1510164382.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:23.267Z,1510164383.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:23.291Z,1510164383.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:23.668Z,1510164383.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:23.691Z,1510164383.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:24.067Z,1510164384.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:24.088Z,1510164384.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:24.455Z,1510164384.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:24.476Z,1510164384.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:24.858Z,1510164384.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:24.874Z,1510164384.874 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:24.874Z,1510164384.874 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94
2017-11-08T18:06:24.874Z,1510164384.874 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T18:06:24.876Z,1510164384.876 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:24.876Z,1510164384.876 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94
2017-11-08T18:06:24.876Z,1510164384.876 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T18:06:24.878Z,1510164384.878 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:24.878Z,1510164384.878 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 94
2017-11-08T18:06:24.878Z,1510164384.878 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T18:06:24.957Z,1510164384.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T18:06:24.957Z,1510164384.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T18:06:24.957Z,1510164384.957 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T18:06:25.248Z,1510164385.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:25.349Z,1510164385.349 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T18:06:25.349Z,1510164385.349 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94
2017-11-08T18:06:25.349Z,1510164385.349 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T18:06:25.350Z,1510164385.349 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94
2017-11-08T18:06:25.350Z,1510164385.350 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T18:06:25.350Z,1510164385.350 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 94
2017-11-08T18:06:25.651Z,1510164385.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:25.681Z,1510164385.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T18:06:25.681Z,1510164385.681 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:06:25.682Z,1510164385.682 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:06:25.682Z,1510164385.682 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T18:06:25.682Z,1510164385.682 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:06:25.683Z,1510164385.683 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:06:25.683Z,1510164385.683 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T18:06:25.683Z,1510164385.683 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:06:25.684Z,1510164385.684 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:06:26.064Z,1510164386.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:26.086Z,1510164386.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T18:06:26.087Z,1510164386.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:26.472Z,1510164386.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:26.488Z,1510164386.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T18:06:26.489Z,1510164386.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:26.872Z,1510164386.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:26.888Z,1510164386.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T18:06:26.889Z,1510164386.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:27.255Z,1510164387.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:27.281Z,1510164387.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T18:06:27.282Z,1510164387.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:27.647Z,1510164387.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:27.686Z,1510164387.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T18:06:27.687Z,1510164387.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:28.048Z,1510164388.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:28.123Z,1510164388.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T18:06:28.124Z,1510164388.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:28.453Z,1510164388.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:28.487Z,1510164388.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T18:06:28.488Z,1510164388.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:28.849Z,1510164388.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:28.874Z,1510164388.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T18:06:28.875Z,1510164388.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:29.262Z,1510164389.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:29.332Z,1510164389.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-08T18:06:29.333Z,1510164389.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:29.666Z,1510164389.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:29.691Z,1510164389.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T18:06:29.692Z,1510164389.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:30.059Z,1510164390.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:30.107Z,1510164390.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T18:06:30.108Z,1510164390.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:30.456Z,1510164390.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:30.488Z,1510164390.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T18:06:30.493Z,1510164390.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:30.847Z,1510164390.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:30.863Z,1510164390.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T18:06:30.864Z,1510164390.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:31.252Z,1510164391.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:31.292Z,1510164391.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T18:06:31.297Z,1510164391.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:31.655Z,1510164391.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:31.672Z,1510164391.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T18:06:31.673Z,1510164391.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:32.065Z,1510164392.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:32.103Z,1510164392.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T18:06:32.104Z,1510164392.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:32.461Z,1510164392.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:32.480Z,1510164392.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T18:06:32.497Z,1510164392.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:32.866Z,1510164392.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:32.882Z,1510164392.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T18:06:32.883Z,1510164392.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:33.256Z,1510164393.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:33.272Z,1510164393.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T18:06:33.273Z,1510164393.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:33.660Z,1510164393.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:33.715Z,1510164393.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T18:06:33.716Z,1510164393.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:34.055Z,1510164394.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:34.075Z,1510164394.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T18:06:34.076Z,1510164394.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:34.452Z,1510164394.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:34.503Z,1510164394.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T18:06:34.504Z,1510164394.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:34.848Z,1510164394.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:34.923Z,1510164394.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T18:06:34.924Z,1510164394.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:35.270Z,1510164395.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:35.300Z,1510164395.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T18:06:35.302Z,1510164395.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:35.661Z,1510164395.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:35.676Z,1510164395.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T18:06:35.677Z,1510164395.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:36.062Z,1510164396.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:36.077Z,1510164396.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T18:06:36.078Z,1510164396.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:36.454Z,1510164396.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:36.470Z,1510164396.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T18:06:36.471Z,1510164396.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:36.853Z,1510164396.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:36.875Z,1510164396.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T18:06:36.876Z,1510164396.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:37.254Z,1510164397.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:37.269Z,1510164397.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T18:06:37.270Z,1510164397.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:37.650Z,1510164397.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:37.674Z,1510164397.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T18:06:37.675Z,1510164397.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:38.061Z,1510164398.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:38.083Z,1510164398.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T18:06:38.084Z,1510164398.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:38.462Z,1510164398.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:38.532Z,1510164398.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T18:06:38.534Z,1510164398.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:38.862Z,1510164398.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:38.895Z,1510164398.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T18:06:38.896Z,1510164398.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:39.251Z,1510164399.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:39.288Z,1510164399.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T18:06:39.289Z,1510164399.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:39.651Z,1510164399.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:39.685Z,1510164399.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T18:06:39.686Z,1510164399.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:40.055Z,1510164400.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:40.085Z,1510164400.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T18:06:40.086Z,1510164400.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:40.448Z,1510164400.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:40.463Z,1510164400.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T18:06:40.464Z,1510164400.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:40.847Z,1510164400.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:40.867Z,1510164400.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T18:06:40.868Z,1510164400.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:41.262Z,1510164401.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:41.294Z,1510164401.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T18:06:41.295Z,1510164401.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:41.665Z,1510164401.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:41.693Z,1510164401.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T18:06:41.694Z,1510164401.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:42.062Z,1510164402.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:42.094Z,1510164402.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T18:06:42.094Z,1510164402.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:42.451Z,1510164402.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:42.467Z,1510164402.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T18:06:42.468Z,1510164402.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:42.854Z,1510164402.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:42.869Z,1510164402.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T18:06:42.870Z,1510164402.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:43.256Z,1510164403.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:43.292Z,1510164403.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T18:06:43.293Z,1510164403.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:43.652Z,1510164403.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:43.685Z,1510164403.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T18:06:43.686Z,1510164403.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:44.065Z,1510164404.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:44.081Z,1510164404.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T18:06:44.082Z,1510164404.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:44.462Z,1510164404.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:44.478Z,1510164404.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T18:06:44.479Z,1510164404.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:44.870Z,1510164404.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:44.906Z,1510164404.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:45.258Z,1510164405.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:45.274Z,1510164405.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:45.657Z,1510164405.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:45.673Z,1510164405.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:46.057Z,1510164406.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:46.073Z,1510164406.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:46.458Z,1510164406.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:46.474Z,1510164406.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:46.857Z,1510164406.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:46.873Z,1510164406.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:47.262Z,1510164407.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:47.279Z,1510164407.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:47.661Z,1510164407.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:47.683Z,1510164407.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:48.066Z,1510164408.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:48.082Z,1510164408.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:48.457Z,1510164408.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:48.473Z,1510164408.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:48.858Z,1510164408.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:48.874Z,1510164408.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:49.258Z,1510164409.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:49.274Z,1510164409.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:49.659Z,1510164409.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:49.680Z,1510164409.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:50.066Z,1510164410.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:50.082Z,1510164410.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:50.466Z,1510164410.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:50.547Z,1510164410.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:50.870Z,1510164410.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:50.886Z,1510164410.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:51.259Z,1510164411.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:51.310Z,1510164411.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:54.332Z,1510164414.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:54.358Z,1510164414.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:54.475Z,1510164414.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:54.517Z,1510164414.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:54.898Z,1510164414.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:54.915Z,1510164414.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:55.286Z,1510164415.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:55.312Z,1510164415.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:55.682Z,1510164415.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:55.708Z,1510164415.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:56.071Z,1510164416.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:56.088Z,1510164416.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:56.468Z,1510164416.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:56.484Z,1510164416.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:56.871Z,1510164416.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:56.888Z,1510164416.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:57.286Z,1510164417.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:57.312Z,1510164417.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:57.682Z,1510164417.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:57.714Z,1510164417.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:58.082Z,1510164418.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:58.110Z,1510164418.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:58.474Z,1510164418.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:58.491Z,1510164418.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:58.871Z,1510164418.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:58.888Z,1510164418.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:59.275Z,1510164419.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:59.295Z,1510164419.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:06:59.674Z,1510164419.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:06:59.691Z,1510164419.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:00.086Z,1510164420.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:00.118Z,1510164420.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:00.486Z,1510164420.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:00.518Z,1510164420.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:00.886Z,1510164420.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:00.902Z,1510164420.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:01.276Z,1510164421.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:01.299Z,1510164421.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:01.676Z,1510164421.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:01.692Z,1510164421.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:02.077Z,1510164422.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:02.099Z,1510164422.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:02.477Z,1510164422.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:02.494Z,1510164422.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:02.876Z,1510164422.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:02.932Z,1510164422.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:03.286Z,1510164423.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:03.302Z,1510164423.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:03.682Z,1510164423.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:03.698Z,1510164423.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:04.082Z,1510164424.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:04.098Z,1510164424.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:04.477Z,1510164424.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:04.500Z,1510164424.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:04.873Z,1510164424.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:04.889Z,1510164424.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:05.276Z,1510164425.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:05.296Z,1510164425.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:05.677Z,1510164425.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:05.694Z,1510164425.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:06.086Z,1510164426.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:06.102Z,1510164426.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:06.486Z,1510164426.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:06.502Z,1510164426.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:06.886Z,1510164426.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:06.902Z,1510164426.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:07.001Z,1510164427.001 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:07:07.001Z,1510164427.001 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T18:07:07.089Z,1510164427.089 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:07:07.089Z,1510164427.089 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:07:07.089Z,1510164427.089 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:07:07.089Z,1510164427.089 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T18:07:07.089Z,1510164427.089 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:07:07.274Z,1510164427.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:07.300Z,1510164427.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:07.381Z,1510164427.381 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:07:07.493Z,1510164427.493 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:07:07.577Z,1510164427.577 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:07:07.685Z,1510164427.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:07.704Z,1510164427.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:08.079Z,1510164428.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:08.096Z,1510164428.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:08.482Z,1510164428.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:08.535Z,1510164428.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:08.881Z,1510164428.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:08.914Z,1510164428.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:09.001Z,1510164429.001 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:07:09.001Z,1510164429.001 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T18:07:09.193Z,1510164429.193 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:07:09.193Z,1510164429.193 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:07:09.193Z,1510164429.193 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:07:09.193Z,1510164429.193 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T18:07:09.193Z,1510164429.193 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:07:09.291Z,1510164429.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:09.316Z,1510164429.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:09.401Z,1510164429.401 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:07:09.597Z,1510164429.597 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:07:09.694Z,1510164429.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:09.726Z,1510164429.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:09.784Z,1510164429.784 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:07:10.094Z,1510164430.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:10.111Z,1510164430.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:10.472Z,1510164430.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:10.509Z,1510164430.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:10.872Z,1510164430.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:10.910Z,1510164430.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:11.277Z,1510164431.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:11.304Z,1510164431.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:11.384Z,1510164431.384 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:07:11.385Z,1510164431.385 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T18:07:11.401Z,1510164431.401 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:07:11.401Z,1510164431.401 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:07:11.401Z,1510164431.401 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:07:11.401Z,1510164431.401 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T18:07:11.401Z,1510164431.401 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:07:11.667Z,1510164431.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:11.709Z,1510164431.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:11.785Z,1510164431.785 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:07:11.805Z,1510164431.805 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:07:11.897Z,1510164431.897 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:07:12.093Z,1510164432.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:12.113Z,1510164432.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:12.494Z,1510164432.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:12.511Z,1510164432.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:12.893Z,1510164432.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:12.910Z,1510164432.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:13.268Z,1510164433.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:13.300Z,1510164433.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:13.391Z,1510164433.391 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:07:13.391Z,1510164433.391 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T18:07:13.513Z,1510164433.513 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:07:13.513Z,1510164433.513 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:07:13.513Z,1510164433.513 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:07:13.513Z,1510164433.513 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T18:07:13.514Z,1510164433.514 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:07:13.673Z,1510164433.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:13.703Z,1510164433.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:13.794Z,1510164433.794 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:07:13.917Z,1510164433.917 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:07:13.998Z,1510164433.998 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:07:14.072Z,1510164434.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:14.111Z,1510164434.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:14.472Z,1510164434.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:14.548Z,1510164434.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:14.875Z,1510164434.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:14.896Z,1510164434.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:15.281Z,1510164435.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:15.298Z,1510164435.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:15.401Z,1510164435.401 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:07:15.401Z,1510164435.401 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T18:07:15.613Z,1510164435.613 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:07:15.614Z,1510164435.614 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:07:15.614Z,1510164435.614 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:07:15.614Z,1510164435.614 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T18:07:15.614Z,1510164435.614 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:07:15.687Z,1510164435.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:15.736Z,1510164435.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:15.810Z,1510164435.810 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:07:15.810Z,1510164435.810 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:07:16.017Z,1510164436.017 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:07:16.088Z,1510164436.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:16.133Z,1510164436.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:16.221Z,1510164436.221 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:07:16.478Z,1510164436.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:16.537Z,1510164436.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:16.877Z,1510164436.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:16.900Z,1510164436.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:17.275Z,1510164437.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:17.298Z,1510164437.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:17.678Z,1510164437.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:17.694Z,1510164437.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:18.091Z,1510164438.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:18.112Z,1510164438.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:18.491Z,1510164438.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:18.512Z,1510164438.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:18.892Z,1510164438.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:18.915Z,1510164438.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:19.271Z,1510164439.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:19.300Z,1510164439.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:19.671Z,1510164439.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:19.702Z,1510164439.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:20.067Z,1510164440.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:20.093Z,1510164440.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:20.468Z,1510164440.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:20.493Z,1510164440.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:20.867Z,1510164440.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:20.898Z,1510164440.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:21.292Z,1510164441.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:21.315Z,1510164441.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:21.691Z,1510164441.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:21.712Z,1510164441.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:22.087Z,1510164442.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:22.104Z,1510164442.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:22.467Z,1510164442.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:22.493Z,1510164442.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:22.867Z,1510164442.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:22.892Z,1510164442.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:23.272Z,1510164443.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:23.307Z,1510164443.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:23.667Z,1510164443.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:23.693Z,1510164443.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:24.087Z,1510164444.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:24.104Z,1510164444.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:24.491Z,1510164444.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:24.512Z,1510164444.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:24.888Z,1510164444.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:24.937Z,1510164444.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:25.267Z,1510164445.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:25.293Z,1510164445.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:25.671Z,1510164445.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:25.708Z,1510164445.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:26.071Z,1510164446.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:26.097Z,1510164446.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:26.472Z,1510164446.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:26.503Z,1510164446.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:26.871Z,1510164446.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:26.902Z,1510164446.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:27.287Z,1510164447.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:27.304Z,1510164447.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:27.691Z,1510164447.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:27.711Z,1510164447.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:28.087Z,1510164448.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:28.104Z,1510164448.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:28.471Z,1510164448.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:28.497Z,1510164448.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:28.871Z,1510164448.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:28.904Z,1510164448.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:29.272Z,1510164449.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:29.306Z,1510164449.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:29.667Z,1510164449.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:29.693Z,1510164449.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:30.086Z,1510164450.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:30.108Z,1510164450.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:30.495Z,1510164450.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:30.516Z,1510164450.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:30.892Z,1510164450.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:30.908Z,1510164450.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:31.272Z,1510164451.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:31.297Z,1510164451.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:31.672Z,1510164451.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:31.707Z,1510164451.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:32.068Z,1510164452.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:32.103Z,1510164452.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:32.473Z,1510164452.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:32.498Z,1510164452.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:32.871Z,1510164452.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:32.906Z,1510164452.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:33.293Z,1510164453.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:33.309Z,1510164453.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:33.692Z,1510164453.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:33.709Z,1510164453.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:34.087Z,1510164454.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:34.105Z,1510164454.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:34.471Z,1510164454.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:34.498Z,1510164454.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:34.871Z,1510164454.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:34.898Z,1510164454.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:35.268Z,1510164455.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:35.309Z,1510164455.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:35.671Z,1510164455.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:35.707Z,1510164455.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:36.092Z,1510164456.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:36.113Z,1510164456.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:36.481Z,1510164456.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:36.514Z,1510164456.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:36.881Z,1510164456.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:36.927Z,1510164456.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:37.271Z,1510164457.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:37.329Z,1510164457.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:37.671Z,1510164457.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:37.706Z,1510164457.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:38.071Z,1510164458.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:38.107Z,1510164458.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:38.472Z,1510164458.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:38.524Z,1510164458.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:38.871Z,1510164458.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:38.906Z,1510164458.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:39.281Z,1510164459.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:39.332Z,1510164459.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:39.692Z,1510164459.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:39.709Z,1510164459.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:40.082Z,1510164460.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:40.108Z,1510164460.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:40.467Z,1510164460.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:40.483Z,1510164460.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:40.871Z,1510164460.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:40.906Z,1510164460.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:41.272Z,1510164461.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:41.304Z,1510164461.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:41.667Z,1510164461.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:41.683Z,1510164461.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:42.086Z,1510164462.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:42.115Z,1510164462.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:42.482Z,1510164462.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:42.508Z,1510164462.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:42.885Z,1510164462.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:42.911Z,1510164462.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:43.271Z,1510164463.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:43.312Z,1510164463.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:43.673Z,1510164463.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:43.716Z,1510164463.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:44.067Z,1510164464.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:44.083Z,1510164464.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:44.472Z,1510164464.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:44.488Z,1510164464.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:44.871Z,1510164464.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:44.891Z,1510164464.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:45.285Z,1510164465.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:45.317Z,1510164465.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:45.686Z,1510164465.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:45.708Z,1510164465.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:46.086Z,1510164466.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:46.110Z,1510164466.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:46.471Z,1510164466.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:46.487Z,1510164466.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:46.871Z,1510164466.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:46.887Z,1510164466.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:47.276Z,1510164467.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:47.304Z,1510164467.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:47.671Z,1510164467.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:47.725Z,1510164467.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:48.086Z,1510164468.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:48.110Z,1510164468.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:48.486Z,1510164468.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:48.510Z,1510164468.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:48.890Z,1510164468.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:48.915Z,1510164468.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:49.270Z,1510164469.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:49.286Z,1510164469.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:49.672Z,1510164469.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:49.705Z,1510164469.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:50.071Z,1510164470.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:50.086Z,1510164470.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:50.471Z,1510164470.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:50.487Z,1510164470.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:50.876Z,1510164470.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:50.892Z,1510164470.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:51.293Z,1510164471.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:51.319Z,1510164471.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:54.374Z,1510164474.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:54.390Z,1510164474.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:54.538Z,1510164474.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:54.570Z,1510164474.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:54.923Z,1510164474.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:54.939Z,1510164474.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:55.324Z,1510164475.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:55.340Z,1510164475.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:55.723Z,1510164475.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:55.740Z,1510164475.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:56.130Z,1510164476.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:56.146Z,1510164476.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:56.531Z,1510164476.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:56.547Z,1510164476.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:56.926Z,1510164476.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:56.943Z,1510164476.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:57.318Z,1510164477.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:57.334Z,1510164477.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:57.720Z,1510164477.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:57.737Z,1510164477.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:58.121Z,1510164478.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:58.138Z,1510164478.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:58.522Z,1510164478.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:58.543Z,1510164478.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:58.921Z,1510164478.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:58.937Z,1510164478.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:59.326Z,1510164479.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:59.342Z,1510164479.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:07:59.729Z,1510164479.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:07:59.811Z,1510164479.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:00.126Z,1510164480.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:00.148Z,1510164480.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:00.521Z,1510164480.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:00.537Z,1510164480.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:00.922Z,1510164480.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:00.974Z,1510164480.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:01.322Z,1510164481.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:01.338Z,1510164481.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:01.719Z,1510164481.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:01.775Z,1510164481.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:02.131Z,1510164482.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:02.146Z,1510164482.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:02.529Z,1510164482.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:02.552Z,1510164482.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:02.930Z,1510164482.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:02.947Z,1510164482.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:03.322Z,1510164483.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:03.338Z,1510164483.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:03.714Z,1510164483.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:03.736Z,1510164483.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:04.121Z,1510164484.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:04.143Z,1510164484.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:04.518Z,1510164484.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:04.534Z,1510164484.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:04.914Z,1510164484.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:04.945Z,1510164484.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:05.330Z,1510164485.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:05.346Z,1510164485.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:05.731Z,1510164485.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:05.746Z,1510164485.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:06.131Z,1510164486.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:06.152Z,1510164486.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:06.519Z,1510164486.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:06.540Z,1510164486.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:06.918Z,1510164486.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:06.934Z,1510164486.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:07.321Z,1510164487.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:07.337Z,1510164487.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:07.719Z,1510164487.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:07.740Z,1510164487.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:08.131Z,1510164488.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:08.151Z,1510164488.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:08.528Z,1510164488.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:08.545Z,1510164488.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:08.930Z,1510164488.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:08.946Z,1510164488.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:09.318Z,1510164489.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:09.333Z,1510164489.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:09.714Z,1510164489.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:09.744Z,1510164489.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:10.115Z,1510164490.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:10.174Z,1510164490.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:10.523Z,1510164490.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:10.539Z,1510164490.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:10.922Z,1510164490.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:10.938Z,1510164490.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:11.330Z,1510164491.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:11.352Z,1510164491.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:11.731Z,1510164491.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:11.747Z,1510164491.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:12.131Z,1510164492.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:12.152Z,1510164492.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:12.519Z,1510164492.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:12.548Z,1510164492.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:12.922Z,1510164492.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:12.938Z,1510164492.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:13.327Z,1510164493.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:13.343Z,1510164493.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:13.722Z,1510164493.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:13.739Z,1510164493.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:14.131Z,1510164494.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:14.147Z,1510164494.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:14.530Z,1510164494.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:14.550Z,1510164494.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:14.931Z,1510164494.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:14.947Z,1510164494.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:15.322Z,1510164495.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:15.338Z,1510164495.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:15.715Z,1510164495.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:15.737Z,1510164495.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:16.121Z,1510164496.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:16.144Z,1510164496.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:16.518Z,1510164496.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:16.535Z,1510164496.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:16.914Z,1510164496.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:16.945Z,1510164496.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:17.330Z,1510164497.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:17.347Z,1510164497.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:17.731Z,1510164497.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:17.748Z,1510164497.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:18.131Z,1510164498.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:18.153Z,1510164498.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:18.519Z,1510164498.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:18.550Z,1510164498.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:18.922Z,1510164498.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:18.938Z,1510164498.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:19.315Z,1510164499.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:19.337Z,1510164499.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:19.719Z,1510164499.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:19.740Z,1510164499.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:20.131Z,1510164500.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:20.151Z,1510164500.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:20.530Z,1510164500.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:20.552Z,1510164500.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:20.930Z,1510164500.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:20.946Z,1510164500.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:21.318Z,1510164501.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:21.334Z,1510164501.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:21.721Z,1510164501.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:21.744Z,1510164501.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:22.121Z,1510164502.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:22.183Z,1510164502.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:22.524Z,1510164502.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:22.561Z,1510164502.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:22.911Z,1510164502.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:22.945Z,1510164502.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:23.336Z,1510164503.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:23.395Z,1510164503.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:23.736Z,1510164503.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:23.751Z,1510164503.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:24.126Z,1510164504.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:24.182Z,1510164504.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:24.515Z,1510164504.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:24.550Z,1510164504.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:24.916Z,1510164504.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:24.948Z,1510164504.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:25.316Z,1510164505.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:25.341Z,1510164505.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:25.715Z,1510164505.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:25.740Z,1510164505.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:26.136Z,1510164506.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:26.152Z,1510164506.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:26.531Z,1510164506.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:26.548Z,1510164506.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:26.932Z,1510164506.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:26.948Z,1510164506.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:27.319Z,1510164507.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:27.345Z,1510164507.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:27.711Z,1510164507.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:27.747Z,1510164507.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:28.115Z,1510164508.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:28.144Z,1510164508.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:28.512Z,1510164508.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:28.547Z,1510164508.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:28.912Z,1510164508.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:28.944Z,1510164508.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:29.326Z,1510164509.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:29.363Z,1510164509.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:29.737Z,1510164509.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:29.753Z,1510164509.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:30.126Z,1510164510.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:30.155Z,1510164510.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:30.515Z,1510164510.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:30.548Z,1510164510.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:30.911Z,1510164510.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:30.927Z,1510164510.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:31.316Z,1510164511.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:31.332Z,1510164511.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:31.715Z,1510164511.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:31.736Z,1510164511.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:32.133Z,1510164512.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:32.162Z,1510164512.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:32.529Z,1510164512.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:32.576Z,1510164512.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:32.934Z,1510164512.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:32.961Z,1510164512.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:33.320Z,1510164513.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:33.336Z,1510164513.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:33.717Z,1510164513.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:33.733Z,1510164513.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:34.116Z,1510164514.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:34.133Z,1510164514.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:34.521Z,1510164514.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:34.537Z,1510164514.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:34.914Z,1510164514.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:34.932Z,1510164514.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:35.330Z,1510164515.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:35.364Z,1510164515.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:35.725Z,1510164515.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:35.742Z,1510164515.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:36.130Z,1510164516.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:36.165Z,1510164516.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:36.518Z,1510164516.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:36.534Z,1510164516.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:36.918Z,1510164516.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:36.934Z,1510164516.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:37.319Z,1510164517.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:37.339Z,1510164517.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:37.718Z,1510164517.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:37.734Z,1510164517.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:38.125Z,1510164518.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:38.164Z,1510164518.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:38.526Z,1510164518.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:38.542Z,1510164518.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:38.930Z,1510164518.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:38.962Z,1510164518.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:39.317Z,1510164519.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:39.339Z,1510164519.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:39.718Z,1510164519.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:39.735Z,1510164519.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:40.118Z,1510164520.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:40.135Z,1510164520.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:40.519Z,1510164520.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:40.539Z,1510164520.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:40.916Z,1510164520.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:40.932Z,1510164520.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:41.330Z,1510164521.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:41.346Z,1510164521.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:41.728Z,1510164521.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:41.768Z,1510164521.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:42.126Z,1510164522.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:42.142Z,1510164522.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:42.518Z,1510164522.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:42.535Z,1510164522.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:42.917Z,1510164522.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:42.939Z,1510164522.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:43.321Z,1510164523.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:43.337Z,1510164523.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:43.721Z,1510164523.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:43.737Z,1510164523.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:44.129Z,1510164524.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:44.145Z,1510164524.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:44.526Z,1510164524.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:44.591Z,1510164524.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:44.924Z,1510164524.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:44.976Z,1510164524.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:45.319Z,1510164525.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:45.335Z,1510164525.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:45.715Z,1510164525.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:45.775Z,1510164525.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:46.119Z,1510164526.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:46.140Z,1510164526.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:46.520Z,1510164526.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:46.569Z,1510164526.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:46.917Z,1510164526.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:46.934Z,1510164526.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:47.330Z,1510164527.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:47.346Z,1510164527.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:47.731Z,1510164527.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:47.746Z,1510164527.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:48.131Z,1510164528.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:48.151Z,1510164528.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:48.519Z,1510164528.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:48.540Z,1510164528.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:48.922Z,1510164528.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:48.938Z,1510164528.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:49.322Z,1510164529.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:49.338Z,1510164529.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:49.722Z,1510164529.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:49.738Z,1510164529.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:50.131Z,1510164530.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:50.151Z,1510164530.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:50.531Z,1510164530.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:50.551Z,1510164530.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:50.930Z,1510164530.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:50.952Z,1510164530.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:51.327Z,1510164531.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:51.342Z,1510164531.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:54.399Z,1510164534.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:54.432Z,1510164534.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:54.555Z,1510164534.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:54.604Z,1510164534.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:54.977Z,1510164534.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:54.993Z,1510164534.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:55.373Z,1510164535.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:55.390Z,1510164535.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:55.773Z,1510164535.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:55.789Z,1510164535.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:56.153Z,1510164536.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:56.187Z,1510164536.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:56.552Z,1510164536.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:56.588Z,1510164536.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:56.962Z,1510164536.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:56.989Z,1510164536.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:57.365Z,1510164537.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:57.399Z,1510164537.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:57.759Z,1510164537.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:57.795Z,1510164537.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:58.152Z,1510164538.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:58.196Z,1510164538.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:58.551Z,1510164538.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:58.593Z,1510164538.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:58.958Z,1510164538.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:58.992Z,1510164538.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:59.366Z,1510164539.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:59.396Z,1510164539.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:08:59.765Z,1510164539.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:08:59.801Z,1510164539.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:00.155Z,1510164540.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:00.177Z,1510164540.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:00.554Z,1510164540.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:00.571Z,1510164540.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:00.966Z,1510164540.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:01.003Z,1510164541.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:01.365Z,1510164541.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:01.401Z,1510164541.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:01.766Z,1510164541.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:01.801Z,1510164541.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:02.156Z,1510164542.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:02.173Z,1510164542.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:02.554Z,1510164542.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:02.571Z,1510164542.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:02.966Z,1510164542.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:03.002Z,1510164543.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:03.366Z,1510164543.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:03.401Z,1510164543.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:03.766Z,1510164543.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:03.800Z,1510164543.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:04.155Z,1510164544.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:04.176Z,1510164544.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:04.555Z,1510164544.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:04.572Z,1510164544.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:04.966Z,1510164544.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:05.000Z,1510164545.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:05.366Z,1510164545.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:05.400Z,1510164545.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:05.766Z,1510164545.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:05.801Z,1510164545.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:06.155Z,1510164546.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:06.176Z,1510164546.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:06.554Z,1510164546.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:06.647Z,1510164546.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:06.966Z,1510164546.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:06.984Z,1510164546.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:07.366Z,1510164547.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:07.424Z,1510164547.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:07.762Z,1510164547.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:07.784Z,1510164547.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:08.159Z,1510164548.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:08.211Z,1510164548.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:08.557Z,1510164548.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:08.576Z,1510164548.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:08.963Z,1510164548.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:08.984Z,1510164548.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:09.366Z,1510164549.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:09.387Z,1510164549.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:09.762Z,1510164549.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:09.778Z,1510164549.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:10.157Z,1510164550.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:10.177Z,1510164550.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:10.559Z,1510164550.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:10.576Z,1510164550.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:10.963Z,1510164550.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:10.983Z,1510164550.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:11.366Z,1510164551.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:11.387Z,1510164551.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:11.766Z,1510164551.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:11.788Z,1510164551.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:12.150Z,1510164552.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:12.171Z,1510164552.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:12.555Z,1510164552.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:12.578Z,1510164552.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:12.968Z,1510164552.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:12.991Z,1510164552.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:13.367Z,1510164553.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:13.391Z,1510164553.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:13.768Z,1510164553.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:13.785Z,1510164553.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:14.163Z,1510164554.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:14.181Z,1510164554.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:14.555Z,1510164554.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:14.572Z,1510164554.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:14.967Z,1510164554.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:14.992Z,1510164554.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:15.366Z,1510164555.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:15.400Z,1510164555.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:15.767Z,1510164555.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:15.784Z,1510164555.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:16.155Z,1510164556.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:16.179Z,1510164556.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:16.559Z,1510164556.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:16.619Z,1510164556.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:16.967Z,1510164556.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:16.988Z,1510164556.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:17.367Z,1510164557.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:17.387Z,1510164557.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:17.767Z,1510164557.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:17.792Z,1510164557.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:18.150Z,1510164558.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:18.174Z,1510164558.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:18.555Z,1510164558.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:18.577Z,1510164558.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:18.930Z,1510164558.930 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T18:09:18.930Z,1510164558.931 [NAL9602] Data Fault, FailCount= 2
2017-11-08T18:09:18.931Z,1510164558.931 [NAL9602](ERROR): Data Fault
2017-11-08T18:09:18.965Z,1510164558.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:18.982Z,1510164558.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:19.061Z,1510164559.061 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T18:09:19.330Z,1510164559.330 [NAL9602](INFO): Powering down
2017-11-08T18:09:19.353Z,1510164559.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:19.386Z,1510164559.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:19.754Z,1510164559.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:19.783Z,1510164559.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:20.156Z,1510164560.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:20.173Z,1510164560.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:20.250Z,1510164560.250 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T18:09:20.250Z,1510164560.250 [NAL9602] No Fault, FailCount= 2
2017-11-08T18:09:20.552Z,1510164560.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:20.569Z,1510164560.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:20.956Z,1510164560.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:20.973Z,1510164560.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:21.353Z,1510164561.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:21.369Z,1510164561.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:21.756Z,1510164561.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:21.773Z,1510164561.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:22.156Z,1510164562.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:22.176Z,1510164562.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:22.553Z,1510164562.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:22.569Z,1510164562.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:22.953Z,1510164562.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:22.970Z,1510164562.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:23.356Z,1510164563.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:23.373Z,1510164563.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:23.756Z,1510164563.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:23.776Z,1510164563.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:24.154Z,1510164564.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:24.170Z,1510164564.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:24.557Z,1510164564.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:24.573Z,1510164564.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:24.956Z,1510164564.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:24.976Z,1510164564.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:25.353Z,1510164565.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:25.376Z,1510164565.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:25.752Z,1510164565.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:25.776Z,1510164565.776 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:25.776Z,1510164565.776 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95
2017-11-08T18:09:25.776Z,1510164565.776 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T18:09:25.778Z,1510164565.778 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:25.778Z,1510164565.778 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95
2017-11-08T18:09:25.778Z,1510164565.778 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T18:09:25.780Z,1510164565.780 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:25.780Z,1510164565.780 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 95
2017-11-08T18:09:25.780Z,1510164565.780 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T18:09:25.853Z,1510164565.853 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T18:09:25.853Z,1510164565.853 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T18:09:25.853Z,1510164565.853 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T18:09:26.153Z,1510164566.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:26.261Z,1510164566.261 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T18:09:26.261Z,1510164566.261 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95
2017-11-08T18:09:26.261Z,1510164566.261 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T18:09:26.261Z,1510164566.261 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95
2017-11-08T18:09:26.262Z,1510164566.262 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T18:09:26.262Z,1510164566.262 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 95
2017-11-08T18:09:26.547Z,1510164566.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:26.578Z,1510164566.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T18:09:26.578Z,1510164566.578 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:09:26.579Z,1510164566.579 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:09:26.579Z,1510164566.579 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T18:09:26.580Z,1510164566.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:09:26.580Z,1510164566.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:09:26.580Z,1510164566.580 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T18:09:26.581Z,1510164566.581 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:09:26.581Z,1510164566.581 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:09:26.947Z,1510164566.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:26.983Z,1510164566.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T18:09:26.985Z,1510164566.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:27.347Z,1510164567.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:27.375Z,1510164567.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T18:09:27.376Z,1510164567.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:27.751Z,1510164567.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:27.767Z,1510164567.767 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T18:09:27.767Z,1510164567.767 [BPC1] Data Fault, FailCount= 1
2017-11-08T18:09:27.767Z,1510164567.767 [BPC1](ERROR): Data Fault
2017-11-08T18:09:27.799Z,1510164567.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T18:09:27.800Z,1510164567.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:27.893Z,1510164567.893 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T18:09:28.147Z,1510164568.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:28.178Z,1510164568.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T18:09:28.179Z,1510164568.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:28.546Z,1510164568.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:28.581Z,1510164568.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T18:09:28.582Z,1510164568.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:28.951Z,1510164568.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:28.976Z,1510164568.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T18:09:28.977Z,1510164568.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:29.061Z,1510164569.061 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T18:09:29.061Z,1510164569.061 [BPC1] No Fault, FailCount= 1
2017-11-08T18:09:29.350Z,1510164569.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:29.420Z,1510164569.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T18:09:29.421Z,1510164569.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:29.746Z,1510164569.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:29.782Z,1510164569.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T18:09:29.782Z,1510164569.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:30.147Z,1510164570.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:30.178Z,1510164570.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T18:09:30.179Z,1510164570.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:30.547Z,1510164570.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:30.581Z,1510164570.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T18:09:30.582Z,1510164570.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:30.946Z,1510164570.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:30.981Z,1510164570.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T18:09:30.982Z,1510164570.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:31.351Z,1510164571.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:31.376Z,1510164571.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T18:09:31.377Z,1510164571.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:31.751Z,1510164571.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:31.775Z,1510164571.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T18:09:31.776Z,1510164571.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:32.147Z,1510164572.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:32.178Z,1510164572.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T18:09:32.179Z,1510164572.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:32.550Z,1510164572.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:32.576Z,1510164572.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T18:09:32.577Z,1510164572.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:32.950Z,1510164572.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:32.975Z,1510164572.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T18:09:32.976Z,1510164572.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:33.346Z,1510164573.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:33.381Z,1510164573.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T18:09:33.382Z,1510164573.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:33.747Z,1510164573.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:33.779Z,1510164573.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T18:09:33.780Z,1510164573.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:34.155Z,1510164574.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:34.187Z,1510164574.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T18:09:34.188Z,1510164574.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:34.547Z,1510164574.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:34.582Z,1510164574.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T18:09:34.583Z,1510164574.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:34.951Z,1510164574.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:34.985Z,1510164574.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T18:09:34.986Z,1510164574.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:35.351Z,1510164575.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:35.376Z,1510164575.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T18:09:35.377Z,1510164575.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:35.747Z,1510164575.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:35.783Z,1510164575.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T18:09:35.784Z,1510164575.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:36.151Z,1510164576.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:36.186Z,1510164576.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T18:09:36.187Z,1510164576.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:36.551Z,1510164576.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:36.583Z,1510164576.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T18:09:36.584Z,1510164576.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:36.946Z,1510164576.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:36.982Z,1510164576.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T18:09:36.983Z,1510164576.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:37.351Z,1510164577.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:37.377Z,1510164577.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T18:09:37.378Z,1510164577.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:37.750Z,1510164577.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:37.801Z,1510164577.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T18:09:37.801Z,1510164577.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:38.146Z,1510164578.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:38.182Z,1510164578.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T18:09:38.183Z,1510164578.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:38.550Z,1510164578.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:38.576Z,1510164578.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T18:09:38.577Z,1510164578.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:38.951Z,1510164578.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:38.975Z,1510164578.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T18:09:38.976Z,1510164578.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:39.351Z,1510164579.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:39.375Z,1510164579.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T18:09:39.376Z,1510164579.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:39.751Z,1510164579.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:39.776Z,1510164579.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T18:09:39.777Z,1510164579.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:40.150Z,1510164580.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:40.176Z,1510164580.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T18:09:40.177Z,1510164580.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:40.546Z,1510164580.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:40.581Z,1510164580.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T18:09:40.582Z,1510164580.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:40.950Z,1510164580.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:40.976Z,1510164580.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T18:09:40.977Z,1510164580.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:41.351Z,1510164581.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:41.376Z,1510164581.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T18:09:41.377Z,1510164581.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:41.747Z,1510164581.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:41.781Z,1510164581.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T18:09:41.782Z,1510164581.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:42.151Z,1510164582.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:42.176Z,1510164582.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T18:09:42.177Z,1510164582.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:42.551Z,1510164582.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:42.576Z,1510164582.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T18:09:42.577Z,1510164582.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:42.947Z,1510164582.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:42.978Z,1510164582.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T18:09:42.979Z,1510164582.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:43.351Z,1510164583.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:43.376Z,1510164583.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T18:09:43.377Z,1510164583.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:43.751Z,1510164583.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:43.783Z,1510164583.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T18:09:43.784Z,1510164583.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:44.147Z,1510164584.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:44.178Z,1510164584.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T18:09:44.179Z,1510164584.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:44.550Z,1510164584.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:44.576Z,1510164584.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T18:09:44.577Z,1510164584.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:44.950Z,1510164584.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:44.976Z,1510164584.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T18:09:44.977Z,1510164584.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:45.350Z,1510164585.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:45.375Z,1510164585.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T18:09:45.377Z,1510164585.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:45.751Z,1510164585.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:45.777Z,1510164585.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:46.151Z,1510164586.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:46.176Z,1510164586.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:46.550Z,1510164586.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:46.576Z,1510164586.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:46.951Z,1510164586.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:46.977Z,1510164586.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:47.350Z,1510164587.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:47.376Z,1510164587.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:47.750Z,1510164587.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:47.775Z,1510164587.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:48.151Z,1510164588.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:48.177Z,1510164588.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:48.551Z,1510164588.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:48.577Z,1510164588.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:48.954Z,1510164588.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:48.987Z,1510164588.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:49.335Z,1510164589.335 [NAL9602](INFO): Powering up NAL9602
2017-11-08T18:09:49.353Z,1510164589.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:49.383Z,1510164589.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:49.751Z,1510164589.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:49.816Z,1510164589.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:50.150Z,1510164590.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:50.205Z,1510164590.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:50.551Z,1510164590.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:50.583Z,1510164590.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:50.955Z,1510164590.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:50.981Z,1510164590.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:51.355Z,1510164591.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:51.426Z,1510164591.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:54.435Z,1510164594.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:54.451Z,1510164594.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:54.585Z,1510164594.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:54.643Z,1510164594.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:54.980Z,1510164594.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:55.003Z,1510164595.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:55.383Z,1510164595.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:55.400Z,1510164595.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:55.781Z,1510164595.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:55.798Z,1510164595.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:56.179Z,1510164596.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:56.199Z,1510164596.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:56.577Z,1510164596.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:56.602Z,1510164596.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:56.980Z,1510164596.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:57.010Z,1510164597.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:57.379Z,1510164597.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:57.399Z,1510164597.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:57.775Z,1510164597.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:57.797Z,1510164597.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:58.176Z,1510164598.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:58.206Z,1510164598.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:58.578Z,1510164598.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:58.594Z,1510164598.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:58.977Z,1510164598.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:58.994Z,1510164598.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:59.380Z,1510164599.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:59.409Z,1510164599.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:09:59.787Z,1510164599.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:09:59.811Z,1510164599.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:00.154Z,1510164600.154 [NAL9602](INFO): NAL9602 initialized
2017-11-08T18:10:00.180Z,1510164600.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:00.197Z,1510164600.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:00.582Z,1510164600.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:00.607Z,1510164600.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:00.990Z,1510164600.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:01.020Z,1510164601.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:01.392Z,1510164601.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:01.409Z,1510164601.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:01.794Z,1510164601.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:01.819Z,1510164601.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:02.172Z,1510164602.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:02.204Z,1510164602.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:02.571Z,1510164602.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:02.587Z,1510164602.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:02.976Z,1510164602.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:03.027Z,1510164603.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:03.373Z,1510164603.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:03.416Z,1510164603.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:03.772Z,1510164603.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:03.788Z,1510164603.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:04.190Z,1510164604.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:04.217Z,1510164604.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:04.590Z,1510164604.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:04.615Z,1510164604.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:04.982Z,1510164604.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:05.014Z,1510164605.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:05.380Z,1510164605.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:05.396Z,1510164605.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:05.775Z,1510164605.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:05.791Z,1510164605.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:06.175Z,1510164606.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:06.191Z,1510164606.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:06.579Z,1510164606.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:06.595Z,1510164606.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:06.986Z,1510164606.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:07.028Z,1510164607.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:07.386Z,1510164607.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:07.402Z,1510164607.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:07.790Z,1510164607.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:07.826Z,1510164607.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:08.179Z,1510164608.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:08.195Z,1510164608.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:08.576Z,1510164608.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:08.593Z,1510164608.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:08.979Z,1510164608.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:08.999Z,1510164608.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:09.377Z,1510164609.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:09.397Z,1510164609.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:09.776Z,1510164609.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:09.793Z,1510164609.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:10.190Z,1510164610.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:10.206Z,1510164610.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:10.586Z,1510164610.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:10.608Z,1510164610.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:10.983Z,1510164610.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:11.000Z,1510164611.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:11.382Z,1510164611.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:11.398Z,1510164611.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:11.776Z,1510164611.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:11.805Z,1510164611.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:12.176Z,1510164612.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:12.198Z,1510164612.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:12.582Z,1510164612.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:12.602Z,1510164612.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:12.988Z,1510164612.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:13.004Z,1510164613.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:13.389Z,1510164613.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:13.412Z,1510164613.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:13.790Z,1510164613.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:13.806Z,1510164613.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:14.176Z,1510164614.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:14.191Z,1510164614.191 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-08T18:10:14.191Z,1510164614.191 [BPC1] Data Fault, FailCount= 1
2017-11-08T18:10:14.191Z,1510164614.191 [BPC1](ERROR): Data Fault
2017-11-08T18:10:14.200Z,1510164614.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:14.281Z,1510164614.281 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T18:10:14.579Z,1510164614.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:14.596Z,1510164614.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:14.981Z,1510164614.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:15.011Z,1510164615.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:15.376Z,1510164615.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:15.411Z,1510164615.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:15.497Z,1510164615.497 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T18:10:15.497Z,1510164615.497 [BPC1] No Fault, FailCount= 1
2017-11-08T18:10:15.778Z,1510164615.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:15.851Z,1510164615.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:16.191Z,1510164616.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:16.207Z,1510164616.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:16.587Z,1510164616.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:16.611Z,1510164616.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:16.988Z,1510164616.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:17.005Z,1510164617.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:17.380Z,1510164617.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:17.411Z,1510164617.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:17.776Z,1510164617.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:17.797Z,1510164617.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:18.178Z,1510164618.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:18.194Z,1510164618.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:18.582Z,1510164618.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:18.598Z,1510164618.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:18.987Z,1510164618.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:19.008Z,1510164619.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:19.387Z,1510164619.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:19.403Z,1510164619.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:19.790Z,1510164619.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:19.806Z,1510164619.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:20.176Z,1510164620.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:20.197Z,1510164620.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:20.578Z,1510164620.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:20.594Z,1510164620.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:20.980Z,1510164620.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:21.010Z,1510164621.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:21.377Z,1510164621.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:21.400Z,1510164621.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:21.778Z,1510164621.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:21.794Z,1510164621.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:22.190Z,1510164622.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:22.206Z,1510164622.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:22.587Z,1510164622.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:22.603Z,1510164622.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:22.988Z,1510164622.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:23.004Z,1510164623.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:23.380Z,1510164623.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:23.410Z,1510164623.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:23.774Z,1510164623.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:23.806Z,1510164623.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:24.178Z,1510164624.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:24.239Z,1510164624.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:24.583Z,1510164624.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:24.600Z,1510164624.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:24.987Z,1510164624.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:25.008Z,1510164625.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:25.387Z,1510164625.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:25.404Z,1510164625.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:25.790Z,1510164625.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:25.806Z,1510164625.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:26.176Z,1510164626.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:26.197Z,1510164626.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:26.578Z,1510164626.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:26.594Z,1510164626.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:26.980Z,1510164626.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:27.010Z,1510164627.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:27.376Z,1510164627.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:27.397Z,1510164627.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:27.778Z,1510164627.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:27.795Z,1510164627.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:28.190Z,1510164628.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:28.206Z,1510164628.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:28.587Z,1510164628.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:28.604Z,1510164628.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:28.988Z,1510164628.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:29.004Z,1510164629.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:29.380Z,1510164629.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:29.410Z,1510164629.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:29.774Z,1510164629.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:29.809Z,1510164629.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:30.179Z,1510164630.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:30.195Z,1510164630.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:30.580Z,1510164630.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:30.610Z,1510164630.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:30.987Z,1510164630.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:31.004Z,1510164631.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:31.387Z,1510164631.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:31.403Z,1510164631.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:31.790Z,1510164631.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:31.806Z,1510164631.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:32.176Z,1510164632.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:32.198Z,1510164632.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:32.579Z,1510164632.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:32.595Z,1510164632.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:32.983Z,1510164632.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:33.004Z,1510164633.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:33.376Z,1510164633.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:33.411Z,1510164633.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:33.779Z,1510164633.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:33.796Z,1510164633.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:34.190Z,1510164634.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:34.208Z,1510164634.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:34.588Z,1510164634.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:34.608Z,1510164634.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:34.989Z,1510164634.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:35.005Z,1510164635.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:35.379Z,1510164635.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:35.403Z,1510164635.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:35.775Z,1510164635.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:35.844Z,1510164635.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:36.185Z,1510164636.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:36.201Z,1510164636.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:36.585Z,1510164636.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:36.647Z,1510164636.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:36.992Z,1510164636.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:37.016Z,1510164637.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:37.395Z,1510164637.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:37.412Z,1510164637.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:37.797Z,1510164637.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:37.848Z,1510164637.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:38.183Z,1510164638.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:38.204Z,1510164638.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:38.571Z,1510164638.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:38.634Z,1510164638.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:38.983Z,1510164638.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:39.000Z,1510164639.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:39.380Z,1510164639.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:39.397Z,1510164639.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:39.771Z,1510164639.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:39.800Z,1510164639.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:40.196Z,1510164640.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:40.224Z,1510164640.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:40.596Z,1510164640.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:40.613Z,1510164640.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:40.994Z,1510164640.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:41.011Z,1510164641.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:41.378Z,1510164641.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:41.414Z,1510164641.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:41.778Z,1510164641.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:41.811Z,1510164641.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:42.174Z,1510164642.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:42.212Z,1510164642.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:42.593Z,1510164642.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:42.610Z,1510164642.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:42.990Z,1510164642.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:43.012Z,1510164643.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:43.396Z,1510164643.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:43.412Z,1510164643.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:43.797Z,1510164643.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:43.812Z,1510164643.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:44.176Z,1510164644.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:44.207Z,1510164644.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:44.575Z,1510164644.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:44.606Z,1510164644.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:44.976Z,1510164644.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:45.006Z,1510164645.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:45.372Z,1510164645.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:45.405Z,1510164645.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:45.771Z,1510164645.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:45.787Z,1510164645.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:46.197Z,1510164646.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:46.219Z,1510164646.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:46.586Z,1510164646.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:46.618Z,1510164646.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:46.982Z,1510164646.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:47.052Z,1510164647.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:47.376Z,1510164647.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:47.411Z,1510164647.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:47.772Z,1510164647.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:47.810Z,1510164647.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:48.172Z,1510164648.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:48.205Z,1510164648.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:48.576Z,1510164648.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:48.592Z,1510164648.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:48.986Z,1510164648.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:49.016Z,1510164649.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:49.386Z,1510164649.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:49.418Z,1510164649.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:49.789Z,1510164649.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:49.815Z,1510164649.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:50.172Z,1510164650.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:50.212Z,1510164650.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:50.575Z,1510164650.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:50.592Z,1510164650.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:50.980Z,1510164650.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:50.996Z,1510164650.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:51.019Z,1510164651.019 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T18:10:51.019Z,1510164651.019 [Default:CheckIn:C.Wait] Stopped
2017-11-08T18:10:51.019Z,1510164651.019 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T18:10:51.019Z,1510164651.019 [Default:CheckIn:D] Running Loop=1
2017-11-08T18:10:51.381Z,1510164651.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:51.397Z,1510164651.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:51.400Z,1510164651.400 [Default:CheckIn:D] Stopped
2017-11-08T18:10:51.400Z,1510164651.400 [Default:CheckIn:E] Running Loop=1
2017-11-08T18:10:54.464Z,1510164654.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:54.481Z,1510164654.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:54.484Z,1510164654.484 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 284.173665 min 
2017-11-08T18:10:54.485Z,1510164654.485 [Default:CheckIn:E] Stopped
2017-11-08T18:10:54.485Z,1510164654.485 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T18:10:54.485Z,1510164654.485 [Default:CheckIn] Stopped
2017-11-08T18:10:54.485Z,1510164654.485 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T18:10:54.485Z,1510164654.485 [Default:CheckIn](INFO): Running loop #16
2017-11-08T18:10:54.485Z,1510164654.485 [Default:CheckIn] Running Loop=16
2017-11-08T18:10:54.485Z,1510164654.485 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T18:10:54.486Z,1510164654.486 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T18:10:54.602Z,1510164654.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:54.643Z,1510164654.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:55.002Z,1510164655.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:55.033Z,1510164655.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:55.401Z,1510164655.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:55.433Z,1510164655.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:55.788Z,1510164655.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:55.804Z,1510164655.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:56.185Z,1510164656.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:56.201Z,1510164656.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:56.588Z,1510164656.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:56.605Z,1510164656.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:57.003Z,1510164657.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:57.039Z,1510164657.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:57.402Z,1510164657.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:57.442Z,1510164657.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:57.802Z,1510164657.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:57.835Z,1510164657.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:58.191Z,1510164658.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:58.212Z,1510164658.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:58.590Z,1510164658.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:58.606Z,1510164658.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:58.991Z,1510164658.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:59.007Z,1510164659.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:59.392Z,1510164659.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:59.408Z,1510164659.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:10:59.791Z,1510164659.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:10:59.859Z,1510164659.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:00.201Z,1510164660.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:00.238Z,1510164660.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:00.605Z,1510164660.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:00.638Z,1510164660.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:01.002Z,1510164661.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:01.023Z,1510164661.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:01.394Z,1510164661.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:01.410Z,1510164661.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:01.793Z,1510164661.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:01.809Z,1510164661.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:02.193Z,1510164662.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:02.206Z,1510164662.206 [BPC1](ERROR): Failed to receive battery data
2017-11-08T18:11:02.206Z,1510164662.206 [BPC1] Communications Fault, FailCount= 1
2017-11-08T18:11:02.206Z,1510164662.206 [BPC1](ERROR): Communications Fault
2017-11-08T18:11:02.222Z,1510164662.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:02.329Z,1510164662.329 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T18:11:02.595Z,1510164662.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:02.611Z,1510164662.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:03.002Z,1510164663.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:03.023Z,1510164663.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:03.402Z,1510164663.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:03.418Z,1510164663.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:03.501Z,1510164663.501 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T18:11:03.501Z,1510164663.501 [BPC1] No Fault, FailCount= 1
2017-11-08T18:11:03.799Z,1510164663.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:03.868Z,1510164663.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:04.191Z,1510164664.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:04.220Z,1510164664.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:04.594Z,1510164664.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:04.610Z,1510164664.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:04.996Z,1510164664.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:05.012Z,1510164665.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:05.393Z,1510164665.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:05.413Z,1510164665.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:05.794Z,1510164665.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:05.810Z,1510164665.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:06.201Z,1510164666.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:06.218Z,1510164666.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:06.602Z,1510164666.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:06.618Z,1510164666.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:07.002Z,1510164667.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:07.018Z,1510164667.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:07.395Z,1510164667.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:07.411Z,1510164667.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:07.795Z,1510164667.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:07.811Z,1510164667.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:08.195Z,1510164668.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:08.217Z,1510164668.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:08.595Z,1510164668.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:08.611Z,1510164668.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:09.002Z,1510164669.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:09.018Z,1510164669.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:09.402Z,1510164669.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:09.418Z,1510164669.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:09.800Z,1510164669.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:09.816Z,1510164669.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:10.194Z,1510164670.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:10.210Z,1510164670.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:10.595Z,1510164670.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:10.615Z,1510164670.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:10.991Z,1510164670.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:11.007Z,1510164671.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:11.395Z,1510164671.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:11.412Z,1510164671.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:11.794Z,1510164671.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:11.810Z,1510164671.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:12.199Z,1510164672.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:12.255Z,1510164672.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:12.602Z,1510164672.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:12.619Z,1510164672.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:13.002Z,1510164673.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:13.023Z,1510164673.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:13.391Z,1510164673.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:13.408Z,1510164673.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:13.795Z,1510164673.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:13.812Z,1510164673.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:14.195Z,1510164674.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:14.217Z,1510164674.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:14.591Z,1510164674.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:14.607Z,1510164674.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:15.002Z,1510164675.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:15.018Z,1510164675.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:15.399Z,1510164675.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:15.420Z,1510164675.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:15.800Z,1510164675.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:15.816Z,1510164675.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:16.196Z,1510164676.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:16.212Z,1510164676.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:16.591Z,1510164676.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:16.607Z,1510164676.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:16.992Z,1510164676.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:17.008Z,1510164677.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:17.394Z,1510164677.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:17.422Z,1510164677.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:17.790Z,1510164677.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:17.806Z,1510164677.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:18.204Z,1510164678.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:18.220Z,1510164678.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:18.604Z,1510164678.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:18.620Z,1510164678.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:18.999Z,1510164678.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:19.023Z,1510164679.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:19.391Z,1510164679.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:19.408Z,1510164679.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:19.794Z,1510164679.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:19.812Z,1510164679.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:20.190Z,1510164680.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:20.215Z,1510164680.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:20.594Z,1510164680.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:20.616Z,1510164680.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:21.003Z,1510164681.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:21.025Z,1510164681.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:21.402Z,1510164681.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:21.423Z,1510164681.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:21.804Z,1510164681.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:21.821Z,1510164681.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:22.194Z,1510164682.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:22.211Z,1510164682.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:22.594Z,1510164682.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:22.609Z,1510164682.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:22.987Z,1510164682.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:23.010Z,1510164683.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:23.389Z,1510164683.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:23.461Z,1510164683.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:23.783Z,1510164683.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:23.815Z,1510164683.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:24.205Z,1510164684.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:24.221Z,1510164684.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:24.607Z,1510164684.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:24.663Z,1510164684.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:24.999Z,1510164684.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:25.019Z,1510164685.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:25.384Z,1510164685.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:25.448Z,1510164685.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:25.783Z,1510164685.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:25.817Z,1510164685.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:26.184Z,1510164686.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:26.209Z,1510164686.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:26.584Z,1510164686.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:26.616Z,1510164686.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:27.002Z,1510164687.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:27.022Z,1510164687.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:27.403Z,1510164687.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:27.423Z,1510164687.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:27.804Z,1510164687.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:27.821Z,1510164687.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:28.188Z,1510164688.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:28.216Z,1510164688.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:28.583Z,1510164688.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:28.615Z,1510164688.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:28.984Z,1510164688.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:29.019Z,1510164689.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:29.389Z,1510164689.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:29.421Z,1510164689.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:29.783Z,1510164689.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:29.811Z,1510164689.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:30.209Z,1510164690.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:30.226Z,1510164690.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:30.608Z,1510164690.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:30.624Z,1510164690.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:30.993Z,1510164690.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:31.020Z,1510164691.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:31.384Z,1510164691.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:31.400Z,1510164691.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:31.788Z,1510164691.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:31.804Z,1510164691.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:32.184Z,1510164692.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:32.207Z,1510164692.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:32.588Z,1510164692.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:32.604Z,1510164692.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:32.998Z,1510164692.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:33.030Z,1510164693.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:33.401Z,1510164693.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:33.429Z,1510164693.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:33.801Z,1510164693.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:33.868Z,1510164693.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:34.188Z,1510164694.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:34.205Z,1510164694.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:34.587Z,1510164694.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:34.603Z,1510164694.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:34.989Z,1510164694.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:35.005Z,1510164695.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:35.389Z,1510164695.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:35.406Z,1510164695.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:35.787Z,1510164695.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:35.807Z,1510164695.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:36.202Z,1510164696.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:36.234Z,1510164696.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:36.602Z,1510164696.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:36.626Z,1510164696.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:37.002Z,1510164697.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:37.025Z,1510164697.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:37.390Z,1510164697.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:37.407Z,1510164697.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:37.788Z,1510164697.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:37.804Z,1510164697.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:38.188Z,1510164698.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:38.204Z,1510164698.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:38.588Z,1510164698.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:38.612Z,1510164698.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:39.002Z,1510164699.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:39.038Z,1510164699.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:39.405Z,1510164699.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:39.444Z,1510164699.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:39.802Z,1510164699.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:39.818Z,1510164699.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:40.191Z,1510164700.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:40.211Z,1510164700.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:40.586Z,1510164700.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:40.614Z,1510164700.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:40.991Z,1510164700.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:41.008Z,1510164701.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:41.392Z,1510164701.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:41.408Z,1510164701.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:41.788Z,1510164701.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:41.804Z,1510164701.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:42.206Z,1510164702.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:42.241Z,1510164702.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:42.605Z,1510164702.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:42.642Z,1510164702.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:42.994Z,1510164702.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:43.010Z,1510164703.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:43.394Z,1510164703.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:43.410Z,1510164703.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:43.792Z,1510164703.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:43.812Z,1510164703.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:44.193Z,1510164704.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:44.215Z,1510164704.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:44.594Z,1510164704.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:44.665Z,1510164704.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:45.002Z,1510164705.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:45.018Z,1510164705.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:45.397Z,1510164705.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:45.413Z,1510164705.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:45.802Z,1510164705.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:45.867Z,1510164705.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:46.191Z,1510164706.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:46.213Z,1510164706.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:46.590Z,1510164706.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:46.628Z,1510164706.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:46.995Z,1510164706.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:47.015Z,1510164707.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:47.393Z,1510164707.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:47.451Z,1510164707.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:47.790Z,1510164707.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:47.805Z,1510164707.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:48.204Z,1510164708.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:48.220Z,1510164708.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:48.603Z,1510164708.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:48.624Z,1510164708.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:48.000Z,1510164709.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:49.016Z,1510164709.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:49.396Z,1510164709.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:49.412Z,1510164709.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:49.789Z,1510164709.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:49.810Z,1510164709.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:50.191Z,1510164710.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:50.207Z,1510164710.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:50.593Z,1510164710.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:50.615Z,1510164710.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:51.002Z,1510164711.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:51.023Z,1510164711.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:51.404Z,1510164711.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:51.420Z,1510164711.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:54.495Z,1510164714.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:54.512Z,1510164714.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:54.628Z,1510164714.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:54.671Z,1510164714.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:55.024Z,1510164715.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:55.050Z,1510164715.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:55.437Z,1510164715.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:55.498Z,1510164715.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:55.823Z,1510164715.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:55.849Z,1510164715.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:56.241Z,1510164716.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:56.257Z,1510164716.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:56.646Z,1510164716.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:56.662Z,1510164716.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:57.045Z,1510164717.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:57.061Z,1510164717.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:57.419Z,1510164717.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:57.451Z,1510164717.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:57.820Z,1510164717.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:57.855Z,1510164717.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:58.224Z,1510164718.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:58.250Z,1510164718.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:58.623Z,1510164718.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:58.649Z,1510164718.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:59.041Z,1510164719.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:59.057Z,1510164719.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:59.444Z,1510164719.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:59.460Z,1510164719.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:11:59.837Z,1510164719.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:11:59.853Z,1510164719.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:00.219Z,1510164720.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:00.251Z,1510164720.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:00.623Z,1510164720.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:00.649Z,1510164720.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:01.023Z,1510164721.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:01.049Z,1510164721.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:01.420Z,1510164721.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:01.456Z,1510164721.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:01.823Z,1510164721.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:01.857Z,1510164721.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:02.244Z,1510164722.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:02.261Z,1510164722.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:02.644Z,1510164722.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:02.661Z,1510164722.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:03.044Z,1510164723.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:03.061Z,1510164723.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:03.423Z,1510164723.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:03.448Z,1510164723.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:03.819Z,1510164723.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:03.851Z,1510164723.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:04.224Z,1510164724.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:04.249Z,1510164724.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:04.623Z,1510164724.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:04.651Z,1510164724.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:05.044Z,1510164725.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:05.061Z,1510164725.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:05.444Z,1510164725.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:05.461Z,1510164725.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:05.839Z,1510164725.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:05.859Z,1510164725.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:06.219Z,1510164726.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:06.276Z,1510164726.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:06.623Z,1510164726.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:06.652Z,1510164726.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:07.023Z,1510164727.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:07.060Z,1510164727.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:07.424Z,1510164727.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:07.456Z,1510164727.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:07.823Z,1510164727.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:07.860Z,1510164727.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:08.233Z,1510164728.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:08.265Z,1510164728.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:08.633Z,1510164728.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:08.666Z,1510164728.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:09.038Z,1510164729.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:09.070Z,1510164729.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:09.427Z,1510164729.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:09.443Z,1510164729.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:09.821Z,1510164729.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:09.837Z,1510164729.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:10.224Z,1510164730.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:10.249Z,1510164730.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:10.626Z,1510164730.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:10.634Z,1510164730.634 [BPC1](ERROR): Failed to receive battery data
2017-11-08T18:12:10.634Z,1510164730.634 [BPC1] Communications Fault, FailCount= 1
2017-11-08T18:12:10.634Z,1510164730.634 [BPC1](ERROR): Communications Fault
2017-11-08T18:12:10.643Z,1510164730.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:10.717Z,1510164730.717 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T18:12:11.030Z,1510164731.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:11.051Z,1510164731.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:11.438Z,1510164731.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:11.454Z,1510164731.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:11.834Z,1510164731.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:11.850Z,1510164731.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:11.925Z,1510164731.925 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T18:12:11.925Z,1510164731.925 [BPC1] No Fault, FailCount= 1
2017-11-08T18:12:12.226Z,1510164732.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:12.300Z,1510164732.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:12.629Z,1510164732.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:12.646Z,1510164732.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:13.029Z,1510164733.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:13.045Z,1510164733.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:13.427Z,1510164733.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:13.443Z,1510164733.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:13.828Z,1510164733.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:13.845Z,1510164733.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:14.235Z,1510164734.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:14.255Z,1510164734.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:14.637Z,1510164734.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:14.654Z,1510164734.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:15.038Z,1510164735.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:15.054Z,1510164735.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:15.429Z,1510164735.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:15.445Z,1510164735.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:15.827Z,1510164735.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:15.843Z,1510164735.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:16.234Z,1510164736.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:16.250Z,1510164736.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:16.630Z,1510164736.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:16.646Z,1510164736.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:17.036Z,1510164737.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:17.052Z,1510164737.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:17.438Z,1510164737.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:17.454Z,1510164737.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:17.835Z,1510164737.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:17.851Z,1510164737.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:18.227Z,1510164738.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:18.243Z,1510164738.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:18.630Z,1510164738.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:18.646Z,1510164738.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:19.025Z,1510164739.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:19.043Z,1510164739.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:19.427Z,1510164739.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:19.444Z,1510164739.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:19.829Z,1510164739.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:19.846Z,1510164739.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:20.237Z,1510164740.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:20.254Z,1510164740.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:20.635Z,1510164740.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:20.690Z,1510164740.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:21.034Z,1510164741.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:21.051Z,1510164741.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:21.427Z,1510164741.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:21.447Z,1510164741.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:21.831Z,1510164741.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:21.847Z,1510164741.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:22.230Z,1510164742.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:22.247Z,1510164742.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:22.629Z,1510164742.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:22.645Z,1510164742.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:23.035Z,1510164743.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:23.052Z,1510164743.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:23.438Z,1510164743.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:23.460Z,1510164743.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:23.834Z,1510164743.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:23.850Z,1510164743.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:24.226Z,1510164744.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:24.243Z,1510164744.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:24.629Z,1510164744.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:24.646Z,1510164744.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:25.029Z,1510164745.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:25.045Z,1510164745.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:25.426Z,1510164745.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:25.443Z,1510164745.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:25.829Z,1510164745.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:25.845Z,1510164745.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:26.234Z,1510164746.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:26.251Z,1510164746.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:26.635Z,1510164746.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:26.651Z,1510164746.651 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:26.651Z,1510164746.651 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96
2017-11-08T18:12:26.652Z,1510164746.652 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T18:12:26.653Z,1510164746.653 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:26.654Z,1510164746.654 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96
2017-11-08T18:12:26.654Z,1510164746.654 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T18:12:26.655Z,1510164746.655 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:26.655Z,1510164746.655 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 96
2017-11-08T18:12:26.655Z,1510164746.655 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T18:12:26.733Z,1510164746.733 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T18:12:26.733Z,1510164746.733 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T18:12:26.734Z,1510164746.734 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T18:12:27.042Z,1510164747.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:27.129Z,1510164747.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T18:12:27.129Z,1510164747.129 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96
2017-11-08T18:12:27.129Z,1510164747.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T18:12:27.129Z,1510164747.129 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96
2017-11-08T18:12:27.130Z,1510164747.130 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T18:12:27.130Z,1510164747.130 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 96
2017-11-08T18:12:27.419Z,1510164747.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:27.443Z,1510164747.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T18:12:27.443Z,1510164747.443 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:12:27.443Z,1510164747.443 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:12:27.444Z,1510164747.444 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T18:12:27.444Z,1510164747.444 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:12:27.444Z,1510164747.444 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:12:27.445Z,1510164747.445 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T18:12:27.445Z,1510164747.445 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:12:27.446Z,1510164747.446 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:12:27.830Z,1510164747.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:27.846Z,1510164747.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T18:12:27.847Z,1510164747.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:28.227Z,1510164748.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:28.255Z,1510164748.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T18:12:28.256Z,1510164748.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:28.623Z,1510164748.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:28.656Z,1510164748.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T18:12:28.657Z,1510164748.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:29.039Z,1510164749.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:29.067Z,1510164749.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T18:12:29.068Z,1510164749.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:29.444Z,1510164749.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:29.460Z,1510164749.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T18:12:29.461Z,1510164749.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:29.839Z,1510164749.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:29.855Z,1510164749.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T18:12:29.856Z,1510164749.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:30.220Z,1510164750.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:30.254Z,1510164750.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T18:12:30.255Z,1510164750.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:30.634Z,1510164750.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:30.650Z,1510164750.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T18:12:30.651Z,1510164750.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:31.019Z,1510164751.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:31.056Z,1510164751.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T18:12:31.057Z,1510164751.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:31.433Z,1510164751.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:31.491Z,1510164751.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T18:12:31.492Z,1510164751.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:31.824Z,1510164751.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:31.875Z,1510164751.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T18:12:31.876Z,1510164751.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:32.241Z,1510164752.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:32.256Z,1510164752.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T18:12:32.257Z,1510164752.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:32.641Z,1510164752.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:32.696Z,1510164752.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T18:12:32.697Z,1510164752.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:33.045Z,1510164753.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:33.061Z,1510164753.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T18:12:33.062Z,1510164753.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:33.419Z,1510164753.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:33.460Z,1510164753.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T18:12:33.461Z,1510164753.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:33.823Z,1510164753.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:33.849Z,1510164753.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T18:12:33.850Z,1510164753.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:34.224Z,1510164754.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:34.248Z,1510164754.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T18:12:34.250Z,1510164754.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:34.623Z,1510164754.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:34.647Z,1510164754.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T18:12:34.648Z,1510164754.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:35.041Z,1510164755.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:35.058Z,1510164755.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T18:12:35.059Z,1510164755.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:35.444Z,1510164755.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:35.460Z,1510164755.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T18:12:35.461Z,1510164755.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:35.843Z,1510164755.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:35.859Z,1510164755.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T18:12:35.859Z,1510164755.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:36.224Z,1510164756.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:36.251Z,1510164756.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T18:12:36.252Z,1510164756.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:36.624Z,1510164756.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:36.649Z,1510164756.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T18:12:36.650Z,1510164756.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:37.024Z,1510164757.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:37.055Z,1510164757.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T18:12:37.056Z,1510164757.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:37.425Z,1510164757.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:37.451Z,1510164757.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T18:12:37.452Z,1510164757.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:37.824Z,1510164757.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:37.849Z,1510164757.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T18:12:37.850Z,1510164757.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:38.240Z,1510164758.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:38.255Z,1510164758.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T18:12:38.257Z,1510164758.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:38.642Z,1510164758.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:38.658Z,1510164758.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T18:12:38.659Z,1510164758.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:39.045Z,1510164759.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:39.061Z,1510164759.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T18:12:39.062Z,1510164759.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:39.423Z,1510164759.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:39.455Z,1510164759.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T18:12:39.456Z,1510164759.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:39.819Z,1510164759.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:39.844Z,1510164759.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T18:12:39.849Z,1510164759.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:40.220Z,1510164760.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:40.251Z,1510164760.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T18:12:40.256Z,1510164760.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:40.619Z,1510164760.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:40.634Z,1510164760.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T18:12:40.635Z,1510164760.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:41.033Z,1510164761.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:41.066Z,1510164761.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T18:12:41.067Z,1510164761.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:41.438Z,1510164761.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:41.504Z,1510164761.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T18:12:41.505Z,1510164761.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:41.833Z,1510164761.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:41.867Z,1510164761.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T18:12:41.868Z,1510164761.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:42.224Z,1510164762.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:42.240Z,1510164762.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T18:12:42.257Z,1510164762.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:42.619Z,1510164762.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:42.635Z,1510164762.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T18:12:42.636Z,1510164762.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:43.019Z,1510164763.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:43.039Z,1510164763.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T18:12:43.040Z,1510164763.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:43.423Z,1510164763.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:43.438Z,1510164763.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T18:12:43.439Z,1510164763.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:43.824Z,1510164763.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:43.856Z,1510164763.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T18:12:43.857Z,1510164763.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:44.237Z,1510164764.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:44.267Z,1510164764.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T18:12:44.268Z,1510164764.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:44.633Z,1510164764.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:44.665Z,1510164764.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T18:12:44.666Z,1510164764.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:45.038Z,1510164765.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:45.073Z,1510164765.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T18:12:45.074Z,1510164765.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:45.424Z,1510164765.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:45.447Z,1510164765.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T18:12:45.448Z,1510164765.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:45.825Z,1510164765.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:45.841Z,1510164765.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T18:12:45.842Z,1510164765.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:46.227Z,1510164766.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:46.247Z,1510164766.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T18:12:46.248Z,1510164766.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:46.626Z,1510164766.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:46.641Z,1510164766.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-08T18:12:46.642Z,1510164766.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:47.033Z,1510164767.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:47.050Z,1510164767.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:47.437Z,1510164767.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:47.454Z,1510164767.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:47.837Z,1510164767.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:47.878Z,1510164767.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:48.228Z,1510164768.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:48.245Z,1510164768.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:48.627Z,1510164768.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:48.648Z,1510164768.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:49.026Z,1510164769.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:49.042Z,1510164769.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:49.427Z,1510164769.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:49.448Z,1510164769.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:49.826Z,1510164769.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:49.843Z,1510164769.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:50.237Z,1510164770.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:50.253Z,1510164770.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:50.637Z,1510164770.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:50.654Z,1510164770.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:51.042Z,1510164771.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:51.074Z,1510164771.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:51.430Z,1510164771.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:51.446Z,1510164771.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:54.523Z,1510164774.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:54.601Z,1510164774.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:54.730Z,1510164774.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:54.764Z,1510164774.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:54.861Z,1510164774.861 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T18:12:55.135Z,1510164775.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:55.188Z,1510164775.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:55.539Z,1510164775.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:55.555Z,1510164775.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:55.930Z,1510164775.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:55.987Z,1510164775.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:56.311Z,1510164776.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:56.340Z,1510164776.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:56.711Z,1510164776.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:56.747Z,1510164776.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:57.116Z,1510164777.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:57.150Z,1510164777.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:57.515Z,1510164777.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:57.539Z,1510164777.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:57.932Z,1510164777.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:57.948Z,1510164777.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:58.335Z,1510164778.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:58.351Z,1510164778.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:58.731Z,1510164778.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:58.751Z,1510164778.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:59.115Z,1510164779.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:59.141Z,1510164779.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:59.515Z,1510164779.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:59.548Z,1510164779.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:12:59.931Z,1510164779.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:12:59.947Z,1510164779.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:00.332Z,1510164780.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:00.348Z,1510164780.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:00.735Z,1510164780.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:00.751Z,1510164780.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:01.116Z,1510164781.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:01.147Z,1510164781.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:01.515Z,1510164781.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:01.541Z,1510164781.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:01.931Z,1510164781.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:01.948Z,1510164781.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:02.335Z,1510164782.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:02.351Z,1510164782.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:02.732Z,1510164782.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:02.749Z,1510164782.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:03.116Z,1510164783.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:03.150Z,1510164783.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:03.515Z,1510164783.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:03.543Z,1510164783.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:03.936Z,1510164783.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:03.953Z,1510164783.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:04.337Z,1510164784.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:04.388Z,1510164784.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:04.735Z,1510164784.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:04.755Z,1510164784.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:05.113Z,1510164785.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:05.147Z,1510164785.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:05.516Z,1510164785.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:05.548Z,1510164785.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:05.932Z,1510164785.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:05.949Z,1510164785.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:06.336Z,1510164786.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:06.353Z,1510164786.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:06.736Z,1510164786.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:06.753Z,1510164786.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:07.116Z,1510164787.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:07.141Z,1510164787.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:07.511Z,1510164787.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:07.544Z,1510164787.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:07.932Z,1510164787.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:07.948Z,1510164787.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:08.331Z,1510164788.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:08.355Z,1510164788.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:08.732Z,1510164788.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:08.749Z,1510164788.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:09.116Z,1510164789.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:09.145Z,1510164789.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:09.511Z,1510164789.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:09.541Z,1510164789.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:09.932Z,1510164789.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:09.950Z,1510164789.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:10.336Z,1510164790.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:10.352Z,1510164790.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:10.732Z,1510164790.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:10.748Z,1510164790.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:11.111Z,1510164791.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:11.143Z,1510164791.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:11.515Z,1510164791.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:11.541Z,1510164791.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:11.932Z,1510164791.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:11.949Z,1510164791.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:12.336Z,1510164792.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:12.352Z,1510164792.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:12.735Z,1510164792.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:12.752Z,1510164792.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:13.116Z,1510164793.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:13.142Z,1510164793.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:13.515Z,1510164793.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:13.541Z,1510164793.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:13.932Z,1510164793.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:13.948Z,1510164793.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:14.336Z,1510164794.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:14.352Z,1510164794.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:14.736Z,1510164794.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:14.811Z,1510164794.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:15.116Z,1510164795.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:15.141Z,1510164795.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:15.515Z,1510164795.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:15.563Z,1510164795.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:15.932Z,1510164795.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:15.949Z,1510164795.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:16.336Z,1510164796.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:16.396Z,1510164796.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:16.732Z,1510164796.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:16.748Z,1510164796.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:17.112Z,1510164797.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:17.160Z,1510164797.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:17.516Z,1510164797.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:17.542Z,1510164797.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:17.915Z,1510164797.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:17.941Z,1510164797.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:18.336Z,1510164798.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:18.353Z,1510164798.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:18.736Z,1510164798.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:18.752Z,1510164798.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:19.136Z,1510164799.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:19.160Z,1510164799.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:19.515Z,1510164799.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:19.542Z,1510164799.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:19.915Z,1510164799.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:19.947Z,1510164799.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:20.316Z,1510164800.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:20.341Z,1510164800.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:20.715Z,1510164800.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:20.742Z,1510164800.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:21.136Z,1510164801.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:21.153Z,1510164801.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:21.535Z,1510164801.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:21.552Z,1510164801.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:21.932Z,1510164801.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:21.949Z,1510164801.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:22.311Z,1510164802.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:22.344Z,1510164802.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:22.715Z,1510164802.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:22.747Z,1510164802.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:23.116Z,1510164803.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:23.147Z,1510164803.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:23.515Z,1510164803.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:23.551Z,1510164803.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:23.932Z,1510164803.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:23.949Z,1510164803.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:24.336Z,1510164804.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:24.353Z,1510164804.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:24.735Z,1510164804.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:24.756Z,1510164804.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:25.113Z,1510164805.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:25.149Z,1510164805.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:25.515Z,1510164805.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:25.571Z,1510164805.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:25.926Z,1510164805.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:25.952Z,1510164805.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:26.336Z,1510164806.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:26.352Z,1510164806.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:26.737Z,1510164806.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:26.753Z,1510164806.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:27.116Z,1510164807.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:27.142Z,1510164807.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:27.515Z,1510164807.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:27.531Z,1510164807.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:27.930Z,1510164807.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:27.957Z,1510164807.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:28.330Z,1510164808.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:28.357Z,1510164808.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:28.725Z,1510164808.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:28.758Z,1510164808.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:29.116Z,1510164809.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:29.133Z,1510164809.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:29.519Z,1510164809.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:29.540Z,1510164809.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:29.925Z,1510164809.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:29.941Z,1510164809.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:30.325Z,1510164810.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:30.342Z,1510164810.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:30.726Z,1510164810.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:30.800Z,1510164810.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:31.115Z,1510164811.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:31.141Z,1510164811.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:31.518Z,1510164811.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:31.534Z,1510164811.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:31.930Z,1510164811.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:31.946Z,1510164811.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:32.326Z,1510164812.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:32.341Z,1510164812.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:32.727Z,1510164812.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:32.748Z,1510164812.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:33.122Z,1510164813.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:33.138Z,1510164813.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:33.517Z,1510164813.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:33.539Z,1510164813.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:33.927Z,1510164813.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:33.948Z,1510164813.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:34.329Z,1510164814.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:34.352Z,1510164814.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:34.727Z,1510164814.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:34.747Z,1510164814.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:35.122Z,1510164815.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:35.139Z,1510164815.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:35.521Z,1510164815.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:35.537Z,1510164815.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:35.926Z,1510164815.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:35.947Z,1510164815.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:36.329Z,1510164816.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:36.397Z,1510164816.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:36.730Z,1510164816.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:36.746Z,1510164816.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:37.121Z,1510164817.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:37.137Z,1510164817.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:37.518Z,1510164817.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:37.575Z,1510164817.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:37.926Z,1510164817.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:37.948Z,1510164817.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:38.326Z,1510164818.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:38.373Z,1510164818.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:38.727Z,1510164818.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:38.743Z,1510164818.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:39.122Z,1510164819.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:39.139Z,1510164819.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:39.517Z,1510164819.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:39.539Z,1510164819.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:39.929Z,1510164819.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:39.946Z,1510164819.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:40.326Z,1510164820.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:40.347Z,1510164820.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:40.726Z,1510164820.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:40.742Z,1510164820.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:41.123Z,1510164821.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:41.139Z,1510164821.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:41.524Z,1510164821.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:41.541Z,1510164821.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:41.926Z,1510164821.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:41.942Z,1510164821.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:42.329Z,1510164822.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:42.345Z,1510164822.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:42.730Z,1510164822.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:42.746Z,1510164822.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:43.118Z,1510164823.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:43.139Z,1510164823.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:43.523Z,1510164823.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:43.539Z,1510164823.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:43.931Z,1510164823.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:43.947Z,1510164823.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:44.326Z,1510164824.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:44.342Z,1510164824.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:44.730Z,1510164824.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:44.746Z,1510164824.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:45.122Z,1510164825.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:45.139Z,1510164825.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:45.517Z,1510164825.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:45.533Z,1510164825.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:45.929Z,1510164825.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:45.946Z,1510164825.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:46.330Z,1510164826.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:46.346Z,1510164826.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:46.726Z,1510164826.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:46.778Z,1510164826.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:47.123Z,1510164827.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:47.140Z,1510164827.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:47.520Z,1510164827.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:47.537Z,1510164827.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:47.926Z,1510164827.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:47.942Z,1510164827.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:48.330Z,1510164828.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:48.352Z,1510164828.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:48.730Z,1510164828.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:48.746Z,1510164828.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:49.118Z,1510164829.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:49.139Z,1510164829.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:49.522Z,1510164829.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:49.539Z,1510164829.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:49.930Z,1510164829.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:49.946Z,1510164829.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:50.326Z,1510164830.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:50.341Z,1510164830.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:50.730Z,1510164830.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:50.746Z,1510164830.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:51.122Z,1510164831.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:51.138Z,1510164831.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:51.521Z,1510164831.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:51.536Z,1510164831.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:54.627Z,1510164834.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:54.648Z,1510164834.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:54.803Z,1510164834.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:54.835Z,1510164834.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:55.194Z,1510164835.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:55.228Z,1510164835.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:55.585Z,1510164835.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:55.602Z,1510164835.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:55.983Z,1510164835.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:56.003Z,1510164836.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:56.379Z,1510164836.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:56.399Z,1510164836.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:56.783Z,1510164836.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:56.799Z,1510164836.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:57.194Z,1510164837.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:57.229Z,1510164837.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:57.595Z,1510164837.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:57.652Z,1510164837.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:57.996Z,1510164837.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:58.028Z,1510164838.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:58.382Z,1510164838.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:58.432Z,1510164838.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:58.782Z,1510164838.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:58.848Z,1510164838.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:59.183Z,1510164839.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:59.204Z,1510164839.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:59.583Z,1510164839.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:13:59.643Z,1510164839.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:13:59.985Z,1510164839.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:00.029Z,1510164840.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:00.397Z,1510164840.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:00.452Z,1510164840.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:00.795Z,1510164840.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:00.829Z,1510164840.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:01.181Z,1510164841.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:01.224Z,1510164841.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:01.586Z,1510164841.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:01.629Z,1510164841.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:01.986Z,1510164841.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:02.003Z,1510164842.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:02.382Z,1510164842.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:02.402Z,1510164842.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:02.788Z,1510164842.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:02.806Z,1510164842.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:03.194Z,1510164843.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:03.237Z,1510164843.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:03.590Z,1510164843.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:03.633Z,1510164843.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:03.995Z,1510164843.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:04.030Z,1510164844.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:04.386Z,1510164844.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:04.404Z,1510164844.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:04.785Z,1510164844.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:04.832Z,1510164844.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:05.186Z,1510164845.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:05.205Z,1510164845.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:05.585Z,1510164845.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:05.606Z,1510164845.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:05.989Z,1510164845.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:06.007Z,1510164846.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:06.394Z,1510164846.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:06.435Z,1510164846.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:06.794Z,1510164846.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:06.831Z,1510164846.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:07.182Z,1510164847.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:07.206Z,1510164847.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:07.587Z,1510164847.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:07.605Z,1510164847.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:07.985Z,1510164847.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:08.029Z,1510164848.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:08.386Z,1510164848.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:08.402Z,1510164848.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:08.782Z,1510164848.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:08.835Z,1510164848.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:09.192Z,1510164849.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:09.251Z,1510164849.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:09.589Z,1510164849.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:09.630Z,1510164849.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:09.994Z,1510164849.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:10.030Z,1510164850.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:10.385Z,1510164850.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:10.406Z,1510164850.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:10.782Z,1510164850.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:10.801Z,1510164850.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:11.186Z,1510164851.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:11.203Z,1510164851.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:11.585Z,1510164851.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:11.602Z,1510164851.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:11.989Z,1510164851.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:12.010Z,1510164852.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:12.395Z,1510164852.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:12.412Z,1510164852.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:12.794Z,1510164852.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:12.839Z,1510164852.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:13.184Z,1510164853.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:13.199Z,1510164853.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:13.582Z,1510164853.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:13.602Z,1510164853.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:13.986Z,1510164853.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:14.005Z,1510164854.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:14.385Z,1510164854.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:14.414Z,1510164854.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:14.782Z,1510164854.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:14.798Z,1510164854.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:15.195Z,1510164855.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:15.214Z,1510164855.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:15.595Z,1510164855.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:15.611Z,1510164855.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:15.993Z,1510164855.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:16.039Z,1510164856.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:16.384Z,1510164856.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:16.412Z,1510164856.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:16.784Z,1510164856.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:16.805Z,1510164856.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:17.188Z,1510164857.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:17.206Z,1510164857.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:17.585Z,1510164857.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:17.635Z,1510164857.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:17.990Z,1510164857.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:18.014Z,1510164858.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:18.395Z,1510164858.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:18.413Z,1510164858.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:18.796Z,1510164858.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:18.819Z,1510164858.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:19.185Z,1510164859.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:19.235Z,1510164859.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:19.586Z,1510164859.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:19.605Z,1510164859.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:19.985Z,1510164859.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:20.062Z,1510164860.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:20.382Z,1510164860.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:20.401Z,1510164860.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:20.786Z,1510164860.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:20.863Z,1510164860.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:21.199Z,1510164861.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:21.219Z,1510164861.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:21.601Z,1510164861.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:21.645Z,1510164861.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:22.003Z,1510164862.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:22.019Z,1510164862.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:22.379Z,1510164862.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:22.443Z,1510164862.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:22.779Z,1510164862.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:22.805Z,1510164862.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:23.180Z,1510164863.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:23.210Z,1510164863.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:23.579Z,1510164863.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:23.621Z,1510164863.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:23.991Z,1510164863.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:24.020Z,1510164864.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:24.400Z,1510164864.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:24.420Z,1510164864.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:24.802Z,1510164864.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:24.818Z,1510164864.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:25.179Z,1510164865.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:25.209Z,1510164865.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:25.575Z,1510164865.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:25.607Z,1510164865.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:25.980Z,1510164865.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:26.008Z,1510164866.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:26.384Z,1510164866.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:26.412Z,1510164866.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:26.775Z,1510164866.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:26.806Z,1510164866.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:27.199Z,1510164867.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:27.231Z,1510164867.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:27.599Z,1510164867.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:27.619Z,1510164867.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:28.002Z,1510164868.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:28.018Z,1510164868.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:28.380Z,1510164868.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:28.409Z,1510164868.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:28.779Z,1510164868.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:28.818Z,1510164868.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:29.180Z,1510164869.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:29.214Z,1510164869.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:29.579Z,1510164869.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:29.618Z,1510164869.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:29.987Z,1510164869.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:30.020Z,1510164870.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:30.401Z,1510164870.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:30.435Z,1510164870.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:30.799Z,1510164870.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:30.863Z,1510164870.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:31.179Z,1510164871.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:31.218Z,1510164871.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:31.579Z,1510164871.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:31.610Z,1510164871.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:31.979Z,1510164871.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:32.023Z,1510164872.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:32.376Z,1510164872.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:32.392Z,1510164872.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:32.779Z,1510164872.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:32.814Z,1510164872.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:33.195Z,1510164873.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:33.258Z,1510164873.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:33.593Z,1510164873.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:33.628Z,1510164873.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:33.989Z,1510164873.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:34.015Z,1510164874.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:34.382Z,1510164874.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:34.403Z,1510164874.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:34.782Z,1510164874.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:34.801Z,1510164874.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:35.183Z,1510164875.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:35.228Z,1510164875.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:35.582Z,1510164875.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:35.599Z,1510164875.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:35.995Z,1510164875.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:36.027Z,1510164876.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:36.396Z,1510164876.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:36.420Z,1510164876.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:36.794Z,1510164876.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:36.834Z,1510164876.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:37.182Z,1510164877.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:37.198Z,1510164877.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:37.582Z,1510164877.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:37.602Z,1510164877.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:37.982Z,1510164877.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:38.002Z,1510164878.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:38.383Z,1510164878.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:38.409Z,1510164878.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:38.783Z,1510164878.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:38.799Z,1510164878.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:39.195Z,1510164879.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:39.254Z,1510164879.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:39.595Z,1510164879.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:39.611Z,1510164879.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:39.994Z,1510164879.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:40.036Z,1510164880.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:40.382Z,1510164880.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:40.398Z,1510164880.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:40.783Z,1510164880.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:40.807Z,1510164880.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:41.189Z,1510164881.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:41.207Z,1510164881.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:41.586Z,1510164881.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:41.629Z,1510164881.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:41.990Z,1510164881.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:42.010Z,1510164882.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:42.396Z,1510164882.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:42.430Z,1510164882.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:42.796Z,1510164882.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:42.855Z,1510164882.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:43.185Z,1510164883.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:43.236Z,1510164883.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:43.582Z,1510164883.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:43.599Z,1510164883.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:43.985Z,1510164883.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:44.006Z,1510164884.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:44.388Z,1510164884.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:44.406Z,1510164884.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:44.782Z,1510164884.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:44.833Z,1510164884.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:45.194Z,1510164885.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:45.215Z,1510164885.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:45.595Z,1510164885.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:45.613Z,1510164885.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:45.994Z,1510164885.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:46.002Z,1510164886.002 [BPC1](ERROR): Failed to receive battery data
2017-11-08T18:14:46.002Z,1510164886.002 [BPC1] Communications Fault, FailCount= 1
2017-11-08T18:14:46.002Z,1510164886.002 [BPC1](ERROR): Communications Fault
2017-11-08T18:14:46.012Z,1510164886.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:46.105Z,1510164886.105 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T18:14:46.386Z,1510164886.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:46.424Z,1510164886.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:46.789Z,1510164886.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:46.808Z,1510164886.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:47.189Z,1510164887.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:47.209Z,1510164887.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:47.289Z,1510164887.289 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T18:14:47.289Z,1510164887.289 [BPC1] No Fault, FailCount= 1
2017-11-08T18:14:47.587Z,1510164887.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:47.660Z,1510164887.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:47.995Z,1510164887.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:48.040Z,1510164888.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:48.396Z,1510164888.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:48.416Z,1510164888.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:48.796Z,1510164888.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:48.814Z,1510164888.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:49.187Z,1510164889.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:49.205Z,1510164889.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:49.582Z,1510164889.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:49.619Z,1510164889.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:49.985Z,1510164889.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:50.002Z,1510164890.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:50.383Z,1510164890.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:50.421Z,1510164890.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:50.782Z,1510164890.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:50.803Z,1510164890.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:51.204Z,1510164891.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:51.239Z,1510164891.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:51.605Z,1510164891.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:51.614Z,1510164891.614 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-08T18:14:51.637Z,1510164891.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:54.673Z,1510164894.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:54.689Z,1510164894.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:54.829Z,1510164894.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:54.861Z,1510164894.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:55.228Z,1510164895.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:55.266Z,1510164895.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:55.623Z,1510164895.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:55.639Z,1510164895.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:56.038Z,1510164896.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:56.095Z,1510164896.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:56.437Z,1510164896.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:56.463Z,1510164896.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:56.841Z,1510164896.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:56.868Z,1510164896.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:57.223Z,1510164897.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:57.243Z,1510164897.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:57.624Z,1510164897.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:57.640Z,1510164897.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:58.020Z,1510164898.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:58.036Z,1510164898.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:58.428Z,1510164898.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:58.444Z,1510164898.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:58.821Z,1510164898.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:58.837Z,1510164898.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:59.231Z,1510164899.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:59.248Z,1510164899.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:14:59.637Z,1510164899.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:14:59.670Z,1510164899.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:00.037Z,1510164900.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:00.053Z,1510164900.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:00.425Z,1510164900.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:00.441Z,1510164900.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:00.826Z,1510164900.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:00.842Z,1510164900.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:01.225Z,1510164901.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:01.241Z,1510164901.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:01.624Z,1510164901.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:01.641Z,1510164901.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:02.030Z,1510164902.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:02.046Z,1510164902.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:02.434Z,1510164902.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:02.450Z,1510164902.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:02.829Z,1510164902.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:02.852Z,1510164902.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:03.265Z,1510164903.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:03.282Z,1510164903.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:03.624Z,1510164903.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:03.640Z,1510164903.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:04.025Z,1510164904.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:04.041Z,1510164904.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:04.428Z,1510164904.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:04.452Z,1510164904.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:04.826Z,1510164904.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:04.842Z,1510164904.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:05.233Z,1510164905.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:05.250Z,1510164905.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:05.633Z,1510164905.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:05.650Z,1510164905.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:06.033Z,1510164906.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:06.049Z,1510164906.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:06.427Z,1510164906.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:06.443Z,1510164906.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:06.825Z,1510164906.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:06.848Z,1510164906.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:07.225Z,1510164907.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:07.249Z,1510164907.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:07.629Z,1510164907.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:07.646Z,1510164907.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:08.038Z,1510164908.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:08.119Z,1510164908.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:08.430Z,1510164908.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:08.446Z,1510164908.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:08.835Z,1510164908.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:08.884Z,1510164908.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:09.234Z,1510164909.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:09.250Z,1510164909.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:09.626Z,1510164909.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:09.677Z,1510164909.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:10.022Z,1510164910.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:10.042Z,1510164910.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:10.426Z,1510164910.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:10.450Z,1510164910.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:10.829Z,1510164910.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:10.844Z,1510164910.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:11.243Z,1510164911.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:11.259Z,1510164911.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:11.638Z,1510164911.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:11.659Z,1510164911.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:12.038Z,1510164912.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:12.059Z,1510164912.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:12.417Z,1510164912.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:12.446Z,1510164912.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:12.830Z,1510164912.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:12.851Z,1510164912.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:13.220Z,1510164913.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:13.245Z,1510164913.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:13.617Z,1510164913.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:13.645Z,1510164913.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:14.039Z,1510164914.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:14.063Z,1510164914.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:14.439Z,1510164914.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:14.463Z,1510164914.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:14.835Z,1510164914.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:14.853Z,1510164914.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:15.232Z,1510164915.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:15.249Z,1510164915.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:15.628Z,1510164915.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:15.643Z,1510164915.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:16.018Z,1510164916.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:16.044Z,1510164916.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:16.420Z,1510164916.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:16.445Z,1510164916.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:16.829Z,1510164916.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:16.845Z,1510164916.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:17.240Z,1510164917.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:17.256Z,1510164917.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:17.642Z,1510164917.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:17.664Z,1510164917.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:18.035Z,1510164918.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:18.095Z,1510164918.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:18.429Z,1510164918.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:18.445Z,1510164918.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:18.828Z,1510164918.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:18.844Z,1510164918.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:19.228Z,1510164919.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:19.244Z,1510164919.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:19.619Z,1510164919.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:19.645Z,1510164919.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:20.038Z,1510164920.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:20.059Z,1510164920.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:20.439Z,1510164920.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:20.455Z,1510164920.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:20.840Z,1510164920.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:20.856Z,1510164920.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:21.220Z,1510164921.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:21.245Z,1510164921.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:21.621Z,1510164921.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:21.651Z,1510164921.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:22.024Z,1510164922.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:22.054Z,1510164922.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:22.420Z,1510164922.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:22.436Z,1510164922.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:22.815Z,1510164922.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:22.836Z,1510164922.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:23.237Z,1510164923.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:23.288Z,1510164923.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:23.635Z,1510164923.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:23.673Z,1510164923.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:24.040Z,1510164924.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:24.076Z,1510164924.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:24.416Z,1510164924.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:24.440Z,1510164924.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:24.828Z,1510164924.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:24.844Z,1510164924.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:25.227Z,1510164925.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:25.248Z,1510164925.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:25.626Z,1510164925.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:25.642Z,1510164925.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:26.034Z,1510164926.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:26.050Z,1510164926.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:26.435Z,1510164926.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:26.475Z,1510164926.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:26.829Z,1510164926.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:26.852Z,1510164926.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:27.228Z,1510164927.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:27.244Z,1510164927.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:27.623Z,1510164927.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:27.644Z,1510164927.644 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:27.644Z,1510164927.644 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97
2017-11-08T18:15:27.644Z,1510164927.644 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T18:15:27.646Z,1510164927.646 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:27.646Z,1510164927.646 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97
2017-11-08T18:15:27.646Z,1510164927.646 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T18:15:27.647Z,1510164927.647 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:27.648Z,1510164927.648 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 97
2017-11-08T18:15:27.648Z,1510164927.648 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T18:15:27.741Z,1510164927.741 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T18:15:27.741Z,1510164927.741 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T18:15:27.741Z,1510164927.741 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T18:15:28.023Z,1510164928.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:28.133Z,1510164928.133 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T18:15:28.133Z,1510164928.133 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97
2017-11-08T18:15:28.133Z,1510164928.133 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T18:15:28.133Z,1510164928.133 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97
2017-11-08T18:15:28.134Z,1510164928.134 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T18:15:28.134Z,1510164928.134 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 97
2017-11-08T18:15:28.418Z,1510164928.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:28.450Z,1510164928.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T18:15:28.450Z,1510164928.450 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:15:28.451Z,1510164928.451 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:15:28.451Z,1510164928.451 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T18:15:28.452Z,1510164928.452 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:15:28.452Z,1510164928.452 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:15:28.452Z,1510164928.452 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T18:15:28.453Z,1510164928.453 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:15:28.453Z,1510164928.453 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:15:28.823Z,1510164928.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:28.854Z,1510164928.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T18:15:28.855Z,1510164928.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:29.235Z,1510164929.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:29.255Z,1510164929.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T18:15:29.256Z,1510164929.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:29.641Z,1510164929.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:29.657Z,1510164929.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T18:15:29.658Z,1510164929.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:30.036Z,1510164930.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:30.100Z,1510164930.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2017-11-08T18:15:30.101Z,1510164930.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:30.420Z,1510164930.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:30.478Z,1510164930.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T18:15:30.479Z,1510164930.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:30.815Z,1510164930.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:30.851Z,1510164930.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T18:15:30.852Z,1510164930.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:31.223Z,1510164931.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:31.248Z,1510164931.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T18:15:31.249Z,1510164931.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:31.618Z,1510164931.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:31.654Z,1510164931.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T18:15:31.655Z,1510164931.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:32.038Z,1510164932.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:32.108Z,1510164932.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-08T18:15:32.109Z,1510164932.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:32.441Z,1510164932.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:32.456Z,1510164932.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T18:15:32.457Z,1510164932.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:32.832Z,1510164932.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:32.896Z,1510164932.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-08T18:15:32.897Z,1510164932.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:33.223Z,1510164933.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:33.254Z,1510164933.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T18:15:33.255Z,1510164933.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:33.619Z,1510164933.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:33.651Z,1510164933.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T18:15:33.652Z,1510164933.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:34.019Z,1510164934.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:34.035Z,1510164934.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T18:15:34.036Z,1510164934.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:34.422Z,1510164934.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:34.438Z,1510164934.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T18:15:34.439Z,1510164934.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:34.825Z,1510164934.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:34.840Z,1510164934.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T18:15:34.841Z,1510164934.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:35.241Z,1510164935.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:35.268Z,1510164935.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T18:15:35.269Z,1510164935.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:35.633Z,1510164935.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:35.668Z,1510164935.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T18:15:35.669Z,1510164935.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:36.034Z,1510164936.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:36.072Z,1510164936.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T18:15:36.073Z,1510164936.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:36.425Z,1510164936.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:36.441Z,1510164936.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T18:15:36.442Z,1510164936.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:36.827Z,1510164936.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:36.847Z,1510164936.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T18:15:36.848Z,1510164936.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:37.222Z,1510164937.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:37.238Z,1510164937.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T18:15:37.239Z,1510164937.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:37.622Z,1510164937.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:37.638Z,1510164937.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T18:15:37.639Z,1510164937.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:38.030Z,1510164938.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:38.046Z,1510164938.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T18:15:38.046Z,1510164938.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:38.433Z,1510164938.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:38.448Z,1510164938.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T18:15:38.449Z,1510164938.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:38.829Z,1510164938.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:38.844Z,1510164938.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T18:15:38.845Z,1510164938.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:39.224Z,1510164939.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:39.240Z,1510164939.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T18:15:39.241Z,1510164939.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:39.623Z,1510164939.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:39.638Z,1510164939.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T18:15:39.639Z,1510164939.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:40.022Z,1510164940.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:40.038Z,1510164940.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T18:15:40.039Z,1510164940.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:40.422Z,1510164940.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:40.437Z,1510164940.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T18:15:40.438Z,1510164940.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:40.822Z,1510164940.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:40.837Z,1510164940.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T18:15:40.838Z,1510164940.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:41.229Z,1510164941.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:41.278Z,1510164941.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T18:15:41.279Z,1510164941.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:41.637Z,1510164941.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:41.669Z,1510164941.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T18:15:41.670Z,1510164941.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:42.026Z,1510164942.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:42.047Z,1510164942.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T18:15:42.048Z,1510164942.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:42.424Z,1510164942.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:42.440Z,1510164942.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T18:15:42.441Z,1510164942.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:42.826Z,1510164942.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:42.846Z,1510164942.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T18:15:42.846Z,1510164942.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:43.228Z,1510164943.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:43.244Z,1510164943.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T18:15:43.245Z,1510164943.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:43.622Z,1510164943.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:43.638Z,1510164943.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T18:15:43.639Z,1510164943.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:44.034Z,1510164944.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:44.055Z,1510164944.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T18:15:44.056Z,1510164944.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:44.429Z,1510164944.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:44.445Z,1510164944.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T18:15:44.446Z,1510164944.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:44.837Z,1510164944.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:44.853Z,1510164944.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T18:15:44.854Z,1510164944.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:45.225Z,1510164945.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:45.241Z,1510164945.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T18:15:45.241Z,1510164945.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:45.622Z,1510164945.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:45.643Z,1510164945.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T18:15:45.644Z,1510164945.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:46.030Z,1510164946.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:46.046Z,1510164946.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T18:15:46.047Z,1510164946.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:46.427Z,1510164946.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:46.447Z,1510164946.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T18:15:46.448Z,1510164946.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:46.821Z,1510164946.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:46.837Z,1510164946.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T18:15:46.838Z,1510164946.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:47.234Z,1510164947.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:47.251Z,1510164947.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T18:15:47.252Z,1510164947.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:47.641Z,1510164947.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:47.674Z,1510164947.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:48.034Z,1510164948.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:48.049Z,1510164948.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:48.428Z,1510164948.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:48.444Z,1510164948.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:48.827Z,1510164948.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:48.852Z,1510164948.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:49.227Z,1510164949.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:49.243Z,1510164949.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:49.631Z,1510164949.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:49.648Z,1510164949.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:50.035Z,1510164950.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:50.056Z,1510164950.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:50.438Z,1510164950.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:50.459Z,1510164950.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:50.836Z,1510164950.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:50.853Z,1510164950.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:51.225Z,1510164951.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:51.242Z,1510164951.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:51.625Z,1510164951.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:51.642Z,1510164951.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:54.719Z,1510164954.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:54.805Z,1510164954.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:54.812Z,1510164954.812 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T18:10:54.5Z
2017-11-08T18:15:54.813Z,1510164954.813 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T18:15:54.813Z,1510164954.813 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T18:15:54.923Z,1510164954.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:54.960Z,1510164954.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:55.583Z,1510164955.583 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171108T132236/Courier0064.lzma
2017-11-08T18:15:55.620Z,1510164955.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:55.694Z,1510164955.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:55.822Z,1510164955.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:55.863Z,1510164955.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:56.236Z,1510164956.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:56.294Z,1510164956.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:56.589Z,1510164956.589 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0064.lzma.bak
2017-11-08T18:15:56.589Z,1510164956.589 [DataOverHttps](INFO): SBD MOMSN=5223191
2017-11-08T18:15:56.619Z,1510164956.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:56.652Z,1510164956.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:57.554Z,1510164957.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:57.570Z,1510164957.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:15:57.703Z,1510164957.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:15:57.724Z,1510164957.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:00.843Z,1510164960.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:00.859Z,1510164960.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:00.993Z,1510164960.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:01.027Z,1510164961.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:01.390Z,1510164961.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:01.418Z,1510164961.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:01.772Z,1510164961.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:01.803Z,1510164961.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:02.176Z,1510164962.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:02.202Z,1510164962.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:02.576Z,1510164962.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:02.602Z,1510164962.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:05.670Z,1510164965.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:05.713Z,1510164965.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:05.802Z,1510164965.802 [DataOverHttps](INFO): Sending 220 bytes from file Logs/20171108T132236/Express0065.lzma
2017-11-08T18:16:05.854Z,1510164965.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:05.890Z,1510164965.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:06.244Z,1510164966.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:06.260Z,1510164966.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:06.601Z,1510164966.601 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0065.lzma.bak
2017-11-08T18:16:06.602Z,1510164966.602 [DataOverHttps](INFO): SBD MOMSN=5223193
2017-11-08T18:16:06.631Z,1510164966.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:06.665Z,1510164966.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:07.566Z,1510164967.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:07.605Z,1510164967.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:07.608Z,1510164967.608 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T18:16:07.608Z,1510164967.608 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T18:16:07.609Z,1510164967.609 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T18:16:07.719Z,1510164967.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:07.758Z,1510164967.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:10.861Z,1510164970.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:10.878Z,1510164970.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:11.026Z,1510164971.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:11.056Z,1510164971.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:11.430Z,1510164971.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:11.460Z,1510164971.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:11.815Z,1510164971.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:11.831Z,1510164971.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:12.217Z,1510164972.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:12.233Z,1510164972.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:12.618Z,1510164972.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:12.634Z,1510164972.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:13.029Z,1510164973.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:13.055Z,1510164973.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:13.434Z,1510164973.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:13.458Z,1510164973.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:13.826Z,1510164973.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:13.858Z,1510164973.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:14.219Z,1510164974.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:14.235Z,1510164974.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:14.619Z,1510164974.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:14.636Z,1510164974.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:15.019Z,1510164975.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:15.039Z,1510164975.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:15.420Z,1510164975.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:15.436Z,1510164975.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:15.819Z,1510164975.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:15.840Z,1510164975.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:16.230Z,1510164976.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:16.262Z,1510164976.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:16.633Z,1510164976.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:16.671Z,1510164976.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:17.026Z,1510164977.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:17.042Z,1510164977.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:17.419Z,1510164977.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:17.483Z,1510164977.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:17.819Z,1510164977.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:17.861Z,1510164977.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:18.223Z,1510164978.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:18.240Z,1510164978.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:18.619Z,1510164978.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:18.648Z,1510164978.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:19.029Z,1510164979.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:19.079Z,1510164979.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:19.434Z,1510164979.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:19.450Z,1510164979.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:19.830Z,1510164979.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:19.883Z,1510164979.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:20.219Z,1510164980.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:20.235Z,1510164980.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:20.614Z,1510164980.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:20.638Z,1510164980.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:21.019Z,1510164981.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:21.041Z,1510164981.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:21.421Z,1510164981.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:21.436Z,1510164981.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:21.815Z,1510164981.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:21.848Z,1510164981.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:22.232Z,1510164982.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:22.249Z,1510164982.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:22.633Z,1510164982.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:22.655Z,1510164982.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:23.028Z,1510164983.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:23.051Z,1510164983.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:23.422Z,1510164983.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:23.438Z,1510164983.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:23.811Z,1510164983.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:23.840Z,1510164983.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:24.222Z,1510164984.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:24.244Z,1510164984.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:24.621Z,1510164984.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:24.638Z,1510164984.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:25.032Z,1510164985.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:25.048Z,1510164985.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:25.435Z,1510164985.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:25.456Z,1510164985.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:25.832Z,1510164985.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:25.848Z,1510164985.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:26.223Z,1510164986.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:26.238Z,1510164986.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:26.611Z,1510164986.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:26.644Z,1510164986.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:27.015Z,1510164987.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:27.041Z,1510164987.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:27.416Z,1510164987.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:27.441Z,1510164987.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:27.811Z,1510164987.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:27.847Z,1510164987.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:28.233Z,1510164988.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:28.291Z,1510164988.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:28.631Z,1510164988.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:28.652Z,1510164988.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:29.037Z,1510164989.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:29.053Z,1510164989.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:29.415Z,1510164989.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:29.444Z,1510164989.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:29.816Z,1510164989.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:29.846Z,1510164989.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:30.218Z,1510164990.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:30.245Z,1510164990.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:30.616Z,1510164990.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:30.652Z,1510164990.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:31.033Z,1510164991.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:31.049Z,1510164991.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:31.438Z,1510164991.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:31.454Z,1510164991.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:31.830Z,1510164991.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:31.852Z,1510164991.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:32.215Z,1510164992.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:32.247Z,1510164992.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:32.616Z,1510164992.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:32.655Z,1510164992.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:33.015Z,1510164993.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:33.050Z,1510164993.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:33.435Z,1510164993.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:33.456Z,1510164993.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:33.830Z,1510164993.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:33.852Z,1510164993.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:34.230Z,1510164994.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:34.251Z,1510164994.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:34.611Z,1510164994.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:34.648Z,1510164994.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:35.017Z,1510164995.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:35.046Z,1510164995.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:35.415Z,1510164995.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:35.448Z,1510164995.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:35.837Z,1510164995.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:35.853Z,1510164995.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:36.236Z,1510164996.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:36.252Z,1510164996.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:36.630Z,1510164996.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:36.662Z,1510164996.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:37.011Z,1510164997.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:37.052Z,1510164997.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:37.415Z,1510164997.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:37.450Z,1510164997.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:37.816Z,1510164997.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:37.849Z,1510164997.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:38.211Z,1510164998.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:38.231Z,1510164998.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:38.626Z,1510164998.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:38.652Z,1510164998.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:39.030Z,1510164999.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:39.064Z,1510164999.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:39.425Z,1510164999.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:39.459Z,1510164999.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:39.811Z,1510164999.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:39.828Z,1510164999.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:40.215Z,1510165000.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:40.284Z,1510165000.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:40.615Z,1510165000.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:40.631Z,1510165000.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:41.019Z,1510165001.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:41.071Z,1510165001.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:41.416Z,1510165001.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:41.436Z,1510165001.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:41.829Z,1510165001.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:41.875Z,1510165001.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:42.230Z,1510165002.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:42.246Z,1510165002.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:42.626Z,1510165002.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:42.642Z,1510165002.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:43.018Z,1510165003.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:43.039Z,1510165003.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:43.414Z,1510165003.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:43.442Z,1510165003.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:43.823Z,1510165003.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:43.839Z,1510165003.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:44.223Z,1510165004.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:44.238Z,1510165004.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:44.627Z,1510165004.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:44.648Z,1510165004.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:45.030Z,1510165005.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:45.046Z,1510165005.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:45.428Z,1510165005.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:45.444Z,1510165005.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:45.817Z,1510165005.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:45.837Z,1510165005.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:46.219Z,1510165006.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:46.244Z,1510165006.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:46.627Z,1510165006.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:46.642Z,1510165006.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:47.024Z,1510165007.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:47.040Z,1510165007.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:47.419Z,1510165007.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:47.444Z,1510165007.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:47.837Z,1510165007.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:47.852Z,1510165007.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:48.236Z,1510165008.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:48.252Z,1510165008.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:48.633Z,1510165008.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:48.664Z,1510165008.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:49.012Z,1510165009.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:49.048Z,1510165009.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:49.411Z,1510165009.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:49.527Z,1510165009.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:49.813Z,1510165009.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:49.876Z,1510165009.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:50.215Z,1510165010.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:50.271Z,1510165010.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:50.626Z,1510165010.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:50.653Z,1510165010.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:51.030Z,1510165011.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:51.060Z,1510165011.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:51.430Z,1510165011.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:51.463Z,1510165011.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:51.811Z,1510165011.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:51.828Z,1510165011.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:52.215Z,1510165012.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:52.252Z,1510165012.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:52.616Z,1510165012.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:52.632Z,1510165012.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:53.016Z,1510165013.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:53.062Z,1510165013.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:53.415Z,1510165013.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:53.435Z,1510165013.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:53.830Z,1510165013.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:53.862Z,1510165013.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:54.234Z,1510165014.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:54.266Z,1510165014.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:54.626Z,1510165014.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:54.642Z,1510165014.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:55.015Z,1510165015.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:55.058Z,1510165015.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:55.417Z,1510165015.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:55.434Z,1510165015.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:55.820Z,1510165015.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:55.841Z,1510165015.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:56.222Z,1510165016.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:56.243Z,1510165016.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:56.626Z,1510165016.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:56.647Z,1510165016.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:57.036Z,1510165017.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:57.052Z,1510165017.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:57.436Z,1510165017.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:57.452Z,1510165017.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:57.826Z,1510165017.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:57.848Z,1510165017.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:58.219Z,1510165018.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:58.248Z,1510165018.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:58.616Z,1510165018.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:58.648Z,1510165018.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:59.025Z,1510165019.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:59.041Z,1510165019.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:59.416Z,1510165019.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:59.441Z,1510165019.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:16:59.834Z,1510165019.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:16:59.859Z,1510165019.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:00.232Z,1510165020.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:00.249Z,1510165020.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:00.633Z,1510165020.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:00.649Z,1510165020.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:01.016Z,1510165021.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:01.043Z,1510165021.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:01.415Z,1510165021.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:01.442Z,1510165021.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:01.816Z,1510165021.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:01.842Z,1510165021.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:02.215Z,1510165022.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:02.311Z,1510165022.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:02.622Z,1510165022.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:02.655Z,1510165022.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:03.034Z,1510165023.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:03.094Z,1510165023.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:03.435Z,1510165023.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:03.456Z,1510165023.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:03.811Z,1510165023.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:03.860Z,1510165023.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:04.216Z,1510165024.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:04.254Z,1510165024.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:04.612Z,1510165024.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:04.644Z,1510165024.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:05.016Z,1510165025.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:05.048Z,1510165025.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:05.415Z,1510165025.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:05.452Z,1510165025.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:05.830Z,1510165025.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:05.857Z,1510165025.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:06.229Z,1510165026.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:06.256Z,1510165026.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:06.626Z,1510165026.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:06.658Z,1510165026.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:07.015Z,1510165027.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:07.032Z,1510165027.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:07.419Z,1510165027.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:07.439Z,1510165027.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:07.820Z,1510165027.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:07.865Z,1510165027.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:08.216Z,1510165028.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:08.239Z,1510165028.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:11.313Z,1510165031.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:11.336Z,1510165031.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:11.501Z,1510165031.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:11.537Z,1510165031.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:11.886Z,1510165031.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:11.956Z,1510165031.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:12.279Z,1510165032.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:12.319Z,1510165032.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:12.676Z,1510165032.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:12.692Z,1510165032.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:13.075Z,1510165033.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:13.096Z,1510165033.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:13.486Z,1510165033.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:13.518Z,1510165033.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:13.893Z,1510165033.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:13.925Z,1510165033.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:14.286Z,1510165034.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:14.302Z,1510165034.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:14.675Z,1510165034.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:14.692Z,1510165034.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:15.079Z,1510165035.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:15.100Z,1510165035.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:15.474Z,1510165035.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:15.491Z,1510165035.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:15.875Z,1510165035.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:15.892Z,1510165035.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:15.973Z,1510165035.973 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:17:15.973Z,1510165035.973 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T18:17:16.101Z,1510165036.101 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:17:16.101Z,1510165036.101 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:17:16.101Z,1510165036.101 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:17:16.101Z,1510165036.101 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T18:17:16.101Z,1510165036.101 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:17:16.278Z,1510165036.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:16.295Z,1510165036.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:16.391Z,1510165036.391 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:17:16.506Z,1510165036.506 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:17:16.587Z,1510165036.587 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:17:16.691Z,1510165036.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:16.726Z,1510165036.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:17.086Z,1510165037.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:17.103Z,1510165037.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:17.490Z,1510165037.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:17.528Z,1510165037.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:17.881Z,1510165037.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:17.897Z,1510165037.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:17.973Z,1510165037.973 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:17:17.973Z,1510165037.973 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T18:17:18.201Z,1510165038.201 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:17:18.201Z,1510165038.201 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:17:18.201Z,1510165038.201 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:17:18.201Z,1510165038.201 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T18:17:18.201Z,1510165038.201 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:17:18.275Z,1510165038.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:18.296Z,1510165038.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:18.373Z,1510165038.373 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:17:18.605Z,1510165038.605 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:17:18.681Z,1510165038.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:18.731Z,1510165038.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:18.811Z,1510165038.811 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:17:19.071Z,1510165039.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:19.097Z,1510165039.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:19.487Z,1510165039.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:19.504Z,1510165039.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:19.891Z,1510165039.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:19.908Z,1510165039.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:20.292Z,1510165040.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:20.308Z,1510165040.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:20.389Z,1510165040.389 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:17:20.389Z,1510165040.389 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T18:17:20.429Z,1510165040.429 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:17:20.429Z,1510165040.429 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:17:20.430Z,1510165040.430 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:17:20.430Z,1510165040.430 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T18:17:20.430Z,1510165040.430 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:17:20.668Z,1510165040.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:20.702Z,1510165040.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:20.785Z,1510165040.785 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:17:20.833Z,1510165040.833 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:17:20.921Z,1510165040.921 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:17:21.087Z,1510165041.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:21.106Z,1510165041.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:21.472Z,1510165041.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:21.498Z,1510165041.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:21.880Z,1510165041.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:21.897Z,1510165041.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:22.271Z,1510165042.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:22.306Z,1510165042.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:22.381Z,1510165042.381 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:17:22.381Z,1510165042.381 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T18:17:22.537Z,1510165042.537 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:17:22.537Z,1510165042.537 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:17:22.537Z,1510165042.537 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:17:22.537Z,1510165042.537 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T18:17:22.537Z,1510165042.537 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:17:22.688Z,1510165042.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:22.704Z,1510165042.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:22.781Z,1510165042.781 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:17:22.941Z,1510165042.941 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:17:23.027Z,1510165043.027 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:17:23.097Z,1510165043.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:23.115Z,1510165043.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:23.491Z,1510165043.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:23.508Z,1510165043.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:23.871Z,1510165043.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:23.975Z,1510165043.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:24.268Z,1510165044.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:24.293Z,1510165044.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:24.373Z,1510165044.373 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:17:24.373Z,1510165044.373 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T18:17:24.641Z,1510165044.641 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:17:24.641Z,1510165044.641 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:17:24.641Z,1510165044.641 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:17:24.641Z,1510165044.641 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T18:17:24.642Z,1510165044.642 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:17:24.673Z,1510165044.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:24.745Z,1510165044.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:24.829Z,1510165044.829 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:17:24.829Z,1510165044.829 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:17:25.049Z,1510165045.049 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:17:25.112Z,1510165045.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:25.181Z,1510165045.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:25.234Z,1510165045.234 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:17:25.486Z,1510165045.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:25.535Z,1510165045.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:25.886Z,1510165045.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:25.908Z,1510165045.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:26.286Z,1510165046.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:26.302Z,1510165046.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:26.673Z,1510165046.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:26.689Z,1510165046.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:27.076Z,1510165047.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:27.100Z,1510165047.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:27.476Z,1510165047.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:27.493Z,1510165047.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:27.878Z,1510165047.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:27.894Z,1510165047.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:28.270Z,1510165048.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:28.299Z,1510165048.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:28.682Z,1510165048.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:28.698Z,1510165048.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:29.086Z,1510165049.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:29.102Z,1510165049.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:29.482Z,1510165049.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:29.498Z,1510165049.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:29.878Z,1510165049.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:29.893Z,1510165049.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:30.277Z,1510165050.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:30.293Z,1510165050.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:30.676Z,1510165050.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:30.697Z,1510165050.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:31.075Z,1510165051.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:31.091Z,1510165051.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:31.486Z,1510165051.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:31.502Z,1510165051.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:31.886Z,1510165051.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:31.902Z,1510165051.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:32.286Z,1510165052.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:32.301Z,1510165052.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:32.678Z,1510165052.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:32.694Z,1510165052.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:33.078Z,1510165053.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:33.094Z,1510165053.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:33.474Z,1510165053.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:33.491Z,1510165053.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:33.878Z,1510165053.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:33.931Z,1510165053.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:34.277Z,1510165054.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:34.294Z,1510165054.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:34.683Z,1510165054.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:34.708Z,1510165054.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:35.082Z,1510165055.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:35.101Z,1510165055.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:35.480Z,1510165055.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:35.512Z,1510165055.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:35.874Z,1510165055.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:35.895Z,1510165055.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:36.277Z,1510165056.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:36.294Z,1510165056.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:36.677Z,1510165056.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:36.697Z,1510165056.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:37.074Z,1510165057.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:37.090Z,1510165057.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:37.486Z,1510165057.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:37.508Z,1510165057.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:37.886Z,1510165057.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:37.907Z,1510165057.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:38.287Z,1510165058.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:38.303Z,1510165058.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:38.677Z,1510165058.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:38.693Z,1510165058.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:39.071Z,1510165059.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:39.103Z,1510165059.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:39.471Z,1510165059.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:39.505Z,1510165059.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:39.868Z,1510165059.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:39.903Z,1510165059.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:40.271Z,1510165060.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:40.302Z,1510165060.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:40.689Z,1510165060.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:40.705Z,1510165060.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:41.092Z,1510165061.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:41.108Z,1510165061.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:41.488Z,1510165061.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:41.504Z,1510165061.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:41.868Z,1510165061.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:41.899Z,1510165061.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:42.272Z,1510165062.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:42.298Z,1510165062.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:42.681Z,1510165062.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:42.697Z,1510165062.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:43.068Z,1510165063.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:43.094Z,1510165063.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:43.488Z,1510165063.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:43.505Z,1510165063.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:43.890Z,1510165063.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:43.911Z,1510165063.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:44.283Z,1510165064.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:44.308Z,1510165064.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:44.672Z,1510165064.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:44.703Z,1510165064.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:45.071Z,1510165065.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:45.107Z,1510165065.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:45.467Z,1510165065.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:45.503Z,1510165065.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:45.872Z,1510165065.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:45.971Z,1510165065.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:46.271Z,1510165066.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:46.311Z,1510165066.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:46.681Z,1510165066.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:46.728Z,1510165066.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:47.092Z,1510165067.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:47.108Z,1510165067.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:47.482Z,1510165067.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:47.546Z,1510165067.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:47.867Z,1510165067.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:47.908Z,1510165067.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:48.271Z,1510165068.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:48.307Z,1510165068.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:48.675Z,1510165068.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:48.705Z,1510165068.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:49.071Z,1510165069.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:49.108Z,1510165069.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:49.492Z,1510165069.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:49.508Z,1510165069.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:49.892Z,1510165069.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:49.908Z,1510165069.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:50.293Z,1510165070.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:50.315Z,1510165070.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:50.671Z,1510165070.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:50.706Z,1510165070.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:51.071Z,1510165071.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:51.105Z,1510165071.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:51.471Z,1510165071.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:51.509Z,1510165071.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:51.868Z,1510165071.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:51.897Z,1510165071.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:52.275Z,1510165072.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:52.311Z,1510165072.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:52.685Z,1510165072.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:52.712Z,1510165072.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:53.082Z,1510165073.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:53.107Z,1510165073.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:53.482Z,1510165073.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:53.507Z,1510165073.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:53.868Z,1510165073.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:53.884Z,1510165073.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:54.272Z,1510165074.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:54.310Z,1510165074.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:54.672Z,1510165074.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:54.705Z,1510165074.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:55.071Z,1510165075.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:55.088Z,1510165075.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:55.478Z,1510165075.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:55.515Z,1510165075.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:55.886Z,1510165075.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:55.957Z,1510165075.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:56.285Z,1510165076.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:56.319Z,1510165076.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:56.671Z,1510165076.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:56.692Z,1510165076.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:57.075Z,1510165077.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:57.096Z,1510165077.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:57.474Z,1510165077.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:57.490Z,1510165077.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:57.875Z,1510165077.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:57.896Z,1510165077.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:58.274Z,1510165078.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:58.290Z,1510165078.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:58.680Z,1510165078.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:58.696Z,1510165078.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:59.082Z,1510165079.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:59.098Z,1510165079.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:59.482Z,1510165079.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:59.498Z,1510165079.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:17:59.874Z,1510165079.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:17:59.890Z,1510165079.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:00.272Z,1510165080.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:00.295Z,1510165080.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:00.675Z,1510165080.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:00.696Z,1510165080.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:01.073Z,1510165081.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:01.095Z,1510165081.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:01.478Z,1510165081.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:01.494Z,1510165081.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:01.886Z,1510165081.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:01.918Z,1510165081.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:02.285Z,1510165082.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:02.327Z,1510165082.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:02.673Z,1510165082.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:02.689Z,1510165082.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:03.075Z,1510165083.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:03.091Z,1510165083.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:03.474Z,1510165083.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:03.490Z,1510165083.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:03.877Z,1510165083.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:03.894Z,1510165083.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:04.276Z,1510165084.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:04.292Z,1510165084.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:04.686Z,1510165084.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:04.702Z,1510165084.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:05.082Z,1510165085.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:05.098Z,1510165085.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:05.482Z,1510165085.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:05.498Z,1510165085.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:05.877Z,1510165085.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:05.893Z,1510165085.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:06.276Z,1510165086.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:06.293Z,1510165086.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:06.671Z,1510165086.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:06.700Z,1510165086.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:07.078Z,1510165087.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:07.094Z,1510165087.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:07.483Z,1510165087.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:07.504Z,1510165087.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:07.886Z,1510165087.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:07.973Z,1510165087.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:08.292Z,1510165088.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:08.308Z,1510165088.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:11.366Z,1510165091.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:11.437Z,1510165091.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:11.559Z,1510165091.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:11.600Z,1510165091.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:11.981Z,1510165091.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:12.036Z,1510165092.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:12.369Z,1510165092.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:12.406Z,1510165092.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:12.766Z,1510165092.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:12.792Z,1510165092.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:13.155Z,1510165093.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:13.171Z,1510165093.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:13.551Z,1510165093.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:13.572Z,1510165093.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:13.956Z,1510165093.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:13.000Z,1510165094.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:14.359Z,1510165094.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:14.375Z,1510165094.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:14.766Z,1510165094.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:14.798Z,1510165094.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:15.173Z,1510165095.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:15.217Z,1510165095.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:15.565Z,1510165095.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:15.591Z,1510165095.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:15.954Z,1510165095.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:15.982Z,1510165095.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:16.361Z,1510165096.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:16.377Z,1510165096.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:16.762Z,1510165096.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:16.778Z,1510165096.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:17.162Z,1510165097.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:17.178Z,1510165097.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:17.561Z,1510165097.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:17.577Z,1510165097.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:17.967Z,1510165097.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:17.983Z,1510165097.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:18.366Z,1510165098.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:18.384Z,1510165098.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:18.770Z,1510165098.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:18.790Z,1510165098.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:19.163Z,1510165099.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:19.179Z,1510165099.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:19.554Z,1510165099.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:19.574Z,1510165099.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:19.962Z,1510165099.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:19.978Z,1510165099.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:20.351Z,1510165100.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:20.413Z,1510165100.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:20.775Z,1510165100.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:20.796Z,1510165100.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:21.178Z,1510165101.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:21.196Z,1510165101.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:21.577Z,1510165101.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:21.606Z,1510165101.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:21.957Z,1510165101.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:21.996Z,1510165101.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:22.357Z,1510165102.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:22.398Z,1510165102.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:22.755Z,1510165102.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:22.775Z,1510165102.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:23.156Z,1510165103.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:23.205Z,1510165103.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:23.572Z,1510165103.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:23.634Z,1510165103.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:23.969Z,1510165103.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:24.008Z,1510165104.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:24.370Z,1510165104.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:24.406Z,1510165104.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:24.770Z,1510165104.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:24.786Z,1510165104.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:25.158Z,1510165105.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:25.179Z,1510165105.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:25.557Z,1510165105.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:25.573Z,1510165105.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:25.960Z,1510165105.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:25.980Z,1510165105.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:26.361Z,1510165106.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:26.377Z,1510165106.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:26.763Z,1510165106.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:26.779Z,1510165106.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:27.169Z,1510165107.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:27.186Z,1510165107.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:27.565Z,1510165107.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:27.581Z,1510165107.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:27.960Z,1510165107.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:27.977Z,1510165107.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:28.363Z,1510165108.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:28.379Z,1510165108.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:28.760Z,1510165108.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:28.786Z,1510165108.786 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:28.786Z,1510165108.786 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98
2017-11-08T18:18:28.786Z,1510165108.786 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T18:18:28.788Z,1510165108.788 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:28.788Z,1510165108.788 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98
2017-11-08T18:18:28.788Z,1510165108.788 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T18:18:28.790Z,1510165108.790 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:28.790Z,1510165108.790 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 98
2017-11-08T18:18:28.790Z,1510165108.790 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T18:18:28.885Z,1510165108.885 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T18:18:28.885Z,1510165108.885 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T18:18:28.885Z,1510165108.885 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T18:18:29.157Z,1510165109.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:29.253Z,1510165109.253 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T18:18:29.253Z,1510165109.253 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98
2017-11-08T18:18:29.254Z,1510165109.254 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T18:18:29.254Z,1510165109.254 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98
2017-11-08T18:18:29.254Z,1510165109.254 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T18:18:29.254Z,1510165109.254 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 98
2017-11-08T18:18:29.554Z,1510165109.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:29.585Z,1510165109.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T18:18:29.585Z,1510165109.585 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:18:29.586Z,1510165109.586 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:18:29.586Z,1510165109.586 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T18:18:29.586Z,1510165109.586 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:18:29.587Z,1510165109.587 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:18:29.587Z,1510165109.587 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T18:18:29.587Z,1510165109.587 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:18:29.588Z,1510165109.588 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:18:29.976Z,1510165109.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:29.996Z,1510165109.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T18:18:29.997Z,1510165109.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:30.370Z,1510165110.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:30.399Z,1510165110.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T18:18:30.400Z,1510165110.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:30.772Z,1510165110.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:30.789Z,1510165110.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T18:18:30.790Z,1510165110.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:31.151Z,1510165111.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:31.189Z,1510165111.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T18:18:31.190Z,1510165111.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:31.564Z,1510165111.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:31.586Z,1510165111.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T18:18:31.588Z,1510165111.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:31.956Z,1510165111.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:31.992Z,1510165111.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T18:18:31.993Z,1510165111.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:32.366Z,1510165112.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:32.422Z,1510165112.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T18:18:32.423Z,1510165112.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:32.770Z,1510165112.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:32.847Z,1510165112.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-08T18:18:32.848Z,1510165112.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:33.173Z,1510165113.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:33.211Z,1510165113.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T18:18:33.217Z,1510165113.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:33.572Z,1510165113.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:33.614Z,1510165113.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T18:18:33.615Z,1510165113.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:33.955Z,1510165113.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:33.988Z,1510165113.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T18:18:33.993Z,1510165113.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:34.359Z,1510165114.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:34.410Z,1510165114.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T18:18:34.411Z,1510165114.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:34.752Z,1510165114.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:34.786Z,1510165114.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T18:18:34.788Z,1510165114.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:35.157Z,1510165115.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:35.193Z,1510165115.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T18:18:35.194Z,1510165115.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:35.555Z,1510165115.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:35.595Z,1510165115.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T18:18:35.596Z,1510165115.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:35.974Z,1510165115.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:36.022Z,1510165116.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T18:18:36.023Z,1510165116.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:36.374Z,1510165116.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:36.402Z,1510165116.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T18:18:36.403Z,1510165116.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:36.774Z,1510165116.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:36.808Z,1510165116.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T18:18:36.818Z,1510165116.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:37.158Z,1510165117.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:37.220Z,1510165117.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T18:18:37.221Z,1510165117.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:37.555Z,1510165117.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:37.571Z,1510165117.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T18:18:37.573Z,1510165117.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:37.959Z,1510165117.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:37.979Z,1510165117.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T18:18:37.981Z,1510165117.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:38.361Z,1510165118.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:38.376Z,1510165118.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T18:18:38.377Z,1510165118.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:38.766Z,1510165118.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:38.782Z,1510165118.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T18:18:38.782Z,1510165118.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:39.177Z,1510165119.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:39.212Z,1510165119.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T18:18:39.213Z,1510165119.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:39.568Z,1510165119.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:39.587Z,1510165119.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T18:18:39.588Z,1510165119.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:39.959Z,1510165119.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:39.975Z,1510165119.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T18:18:39.976Z,1510165119.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:40.362Z,1510165120.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:40.378Z,1510165120.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T18:18:40.378Z,1510165120.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:40.762Z,1510165120.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:40.783Z,1510165120.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T18:18:40.784Z,1510165120.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:41.163Z,1510165121.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:41.179Z,1510165121.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T18:18:41.180Z,1510165121.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:41.561Z,1510165121.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:41.576Z,1510165121.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T18:18:41.577Z,1510165121.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:41.965Z,1510165121.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:41.981Z,1510165121.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T18:18:41.982Z,1510165121.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:42.370Z,1510165122.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:42.386Z,1510165122.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T18:18:42.387Z,1510165122.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:42.766Z,1510165122.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:42.814Z,1510165122.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T18:18:42.815Z,1510165122.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:43.162Z,1510165123.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:43.178Z,1510165123.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T18:18:43.179Z,1510165123.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:43.557Z,1510165123.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:43.573Z,1510165123.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T18:18:43.574Z,1510165123.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:43.965Z,1510165123.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:43.982Z,1510165123.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T18:18:43.983Z,1510165123.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:44.358Z,1510165124.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:44.379Z,1510165124.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T18:18:44.380Z,1510165124.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:44.766Z,1510165124.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:44.787Z,1510165124.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T18:18:44.788Z,1510165124.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:45.174Z,1510165125.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:45.190Z,1510165125.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T18:18:45.191Z,1510165125.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:45.576Z,1510165125.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:45.603Z,1510165125.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T18:18:45.603Z,1510165125.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:45.951Z,1510165125.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:45.990Z,1510165125.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T18:18:45.991Z,1510165125.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:46.355Z,1510165126.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:46.380Z,1510165126.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T18:18:46.381Z,1510165126.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:46.755Z,1510165126.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:46.781Z,1510165126.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T18:18:46.781Z,1510165126.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:47.158Z,1510165127.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:47.184Z,1510165127.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T18:18:47.185Z,1510165127.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:47.555Z,1510165127.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:47.590Z,1510165127.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T18:18:47.591Z,1510165127.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:47.976Z,1510165127.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:47.992Z,1510165127.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T18:18:47.993Z,1510165127.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:48.375Z,1510165128.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:48.391Z,1510165128.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T18:18:48.392Z,1510165128.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:48.772Z,1510165128.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:48.788Z,1510165128.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:49.151Z,1510165129.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:49.190Z,1510165129.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:49.551Z,1510165129.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:49.586Z,1510165129.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:49.956Z,1510165129.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:49.997Z,1510165129.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:50.356Z,1510165130.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:50.390Z,1510165130.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:50.772Z,1510165130.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:50.793Z,1510165130.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:51.181Z,1510165131.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:51.198Z,1510165131.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:51.565Z,1510165131.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:51.592Z,1510165131.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:51.954Z,1510165131.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:52.009Z,1510165132.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:52.375Z,1510165132.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:52.404Z,1510165132.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:52.766Z,1510165132.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:52.798Z,1510165132.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:53.161Z,1510165133.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:53.177Z,1510165133.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:53.559Z,1510165133.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:53.575Z,1510165133.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:53.971Z,1510165133.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:54.014Z,1510165134.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:54.370Z,1510165134.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:54.402Z,1510165134.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:54.770Z,1510165134.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:54.846Z,1510165134.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:55.158Z,1510165135.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:55.179Z,1510165135.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:55.561Z,1510165135.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:55.619Z,1510165135.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:55.960Z,1510165135.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:55.980Z,1510165135.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:56.358Z,1510165136.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:56.413Z,1510165136.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:56.766Z,1510165136.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:56.782Z,1510165136.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:57.170Z,1510165137.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:57.190Z,1510165137.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:57.573Z,1510165137.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:57.626Z,1510165137.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:57.957Z,1510165137.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:57.977Z,1510165137.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:58.359Z,1510165138.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:58.386Z,1510165138.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:58.762Z,1510165138.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:58.778Z,1510165138.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:59.163Z,1510165139.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:59.179Z,1510165139.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:59.561Z,1510165139.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:18:59.577Z,1510165139.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:18:59.970Z,1510165139.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:00.016Z,1510165140.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:00.370Z,1510165140.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:00.390Z,1510165140.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:00.766Z,1510165140.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:00.783Z,1510165140.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:01.160Z,1510165141.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:01.188Z,1510165141.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:01.557Z,1510165141.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:01.573Z,1510165141.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:01.956Z,1510165141.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:01.977Z,1510165141.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:02.362Z,1510165142.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:02.378Z,1510165142.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:02.776Z,1510165142.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:02.796Z,1510165142.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:03.174Z,1510165143.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:03.227Z,1510165143.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:03.592Z,1510165143.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:03.639Z,1510165143.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:03.952Z,1510165143.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:03.990Z,1510165143.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:04.358Z,1510165144.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:04.392Z,1510165144.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:04.751Z,1510165144.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:04.803Z,1510165144.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:05.158Z,1510165145.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:05.187Z,1510165145.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:05.554Z,1510165145.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:05.590Z,1510165145.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:05.977Z,1510165145.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:05.993Z,1510165145.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:06.373Z,1510165146.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:06.390Z,1510165146.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:06.772Z,1510165146.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:06.793Z,1510165146.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:07.158Z,1510165147.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:07.184Z,1510165147.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:07.552Z,1510165147.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:07.585Z,1510165147.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:07.956Z,1510165147.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:07.995Z,1510165147.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:08.360Z,1510165148.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:08.398Z,1510165148.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:08.766Z,1510165148.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:08.798Z,1510165148.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:12.003Z,1510165152.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:12.042Z,1510165152.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:12.166Z,1510165152.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:12.200Z,1510165152.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:12.551Z,1510165152.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:12.588Z,1510165152.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:12.956Z,1510165152.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:12.999Z,1510165152.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:13.357Z,1510165153.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:13.396Z,1510165153.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:13.762Z,1510165153.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:13.795Z,1510165153.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:14.170Z,1510165154.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:14.201Z,1510165154.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:14.566Z,1510165154.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:14.601Z,1510165154.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:14.955Z,1510165154.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:14.976Z,1510165154.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:15.355Z,1510165155.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:15.376Z,1510165155.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:15.756Z,1510165155.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:15.773Z,1510165155.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:16.158Z,1510165156.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:16.175Z,1510165156.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:16.566Z,1510165156.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:16.602Z,1510165156.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:16.966Z,1510165156.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:17.066Z,1510165157.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:17.368Z,1510165157.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:17.405Z,1510165157.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:17.754Z,1510165157.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:17.806Z,1510165157.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:18.158Z,1510165158.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:18.180Z,1510165158.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:18.554Z,1510165158.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:18.615Z,1510165158.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:18.954Z,1510165158.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:18.971Z,1510165158.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:19.354Z,1510165159.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:19.371Z,1510165159.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:19.766Z,1510165159.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:19.804Z,1510165159.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:20.165Z,1510165160.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:20.181Z,1510165160.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:20.573Z,1510165160.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:20.607Z,1510165160.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:20.955Z,1510165160.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:20.976Z,1510165160.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:21.354Z,1510165161.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:21.376Z,1510165161.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:21.757Z,1510165161.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:21.774Z,1510165161.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:22.156Z,1510165162.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:22.173Z,1510165162.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:22.561Z,1510165162.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:22.578Z,1510165162.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:22.966Z,1510165162.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:22.988Z,1510165162.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:23.362Z,1510165163.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:23.380Z,1510165163.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:23.754Z,1510165163.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:23.770Z,1510165163.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:24.151Z,1510165164.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:24.182Z,1510165164.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:24.557Z,1510165164.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:24.574Z,1510165164.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:24.955Z,1510165164.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:24.971Z,1510165164.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:25.350Z,1510165165.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:25.379Z,1510165165.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:25.767Z,1510165165.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:25.784Z,1510165165.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:26.167Z,1510165166.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:26.183Z,1510165166.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:26.567Z,1510165166.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:26.587Z,1510165166.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:26.961Z,1510165166.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:27.019Z,1510165167.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:27.358Z,1510165167.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:27.375Z,1510165167.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:27.759Z,1510165167.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:27.776Z,1510165167.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:28.155Z,1510165168.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:28.178Z,1510165168.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:28.568Z,1510165168.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:28.584Z,1510165168.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:28.967Z,1510165168.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:28.991Z,1510165168.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:29.367Z,1510165169.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:29.387Z,1510165169.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:29.758Z,1510165169.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:29.774Z,1510165169.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:30.155Z,1510165170.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:30.178Z,1510165170.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:30.561Z,1510165170.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:30.578Z,1510165170.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:30.954Z,1510165170.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:30.971Z,1510165170.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:31.350Z,1510165171.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:31.373Z,1510165171.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:31.766Z,1510165171.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:31.784Z,1510165171.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:32.167Z,1510165172.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:32.183Z,1510165172.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:32.567Z,1510165172.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:32.592Z,1510165172.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:32.955Z,1510165172.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:32.977Z,1510165172.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:33.354Z,1510165173.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:33.370Z,1510165173.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:33.750Z,1510165173.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:33.782Z,1510165173.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:34.155Z,1510165174.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:34.185Z,1510165174.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:34.568Z,1510165174.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:34.585Z,1510165174.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:34.966Z,1510165174.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:34.988Z,1510165174.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:35.367Z,1510165175.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:35.384Z,1510165175.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:35.754Z,1510165175.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:35.774Z,1510165175.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:36.157Z,1510165176.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:36.174Z,1510165176.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:36.550Z,1510165176.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:36.574Z,1510165176.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:36.958Z,1510165176.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:36.976Z,1510165176.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:37.358Z,1510165177.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:37.376Z,1510165177.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:37.778Z,1510165177.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:37.794Z,1510165177.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:38.173Z,1510165178.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:38.189Z,1510165178.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:38.571Z,1510165178.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:38.638Z,1510165178.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:38.956Z,1510165178.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:38.988Z,1510165178.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:39.351Z,1510165179.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:39.397Z,1510165179.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:39.748Z,1510165179.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:39.783Z,1510165179.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:40.151Z,1510165180.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:40.184Z,1510165180.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:40.573Z,1510165180.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:40.619Z,1510165180.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:40.973Z,1510165180.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:40.989Z,1510165180.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:41.368Z,1510165181.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:41.426Z,1510165181.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:41.747Z,1510165181.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:41.780Z,1510165181.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:42.147Z,1510165182.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:42.183Z,1510165182.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:42.548Z,1510165182.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:42.573Z,1510165182.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:42.954Z,1510165182.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:42.992Z,1510165182.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:43.355Z,1510165183.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:43.387Z,1510165183.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:43.762Z,1510165183.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:43.792Z,1510165183.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:44.161Z,1510165184.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:44.191Z,1510165184.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:44.558Z,1510165184.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:44.584Z,1510165184.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:44.951Z,1510165184.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:44.986Z,1510165184.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:45.351Z,1510165185.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:45.390Z,1510165185.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:45.752Z,1510165185.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:45.788Z,1510165185.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:46.151Z,1510165186.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:46.193Z,1510165186.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:46.561Z,1510165186.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:46.589Z,1510165186.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:46.961Z,1510165186.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:46.995Z,1510165186.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:47.362Z,1510165187.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:47.388Z,1510165187.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:47.751Z,1510165187.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:47.767Z,1510165187.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:48.147Z,1510165188.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:48.167Z,1510165188.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:48.551Z,1510165188.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:48.572Z,1510165188.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:48.956Z,1510165188.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:48.972Z,1510165188.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:49.349Z,1510165189.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:49.365Z,1510165189.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:49.766Z,1510165189.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:49.816Z,1510165189.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:50.165Z,1510165190.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:50.197Z,1510165190.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:50.566Z,1510165190.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:50.598Z,1510165190.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:50.955Z,1510165190.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:50.976Z,1510165190.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:51.354Z,1510165191.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:51.371Z,1510165191.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:51.751Z,1510165191.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:51.772Z,1510165191.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:52.154Z,1510165192.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:52.171Z,1510165192.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:52.565Z,1510165192.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:52.602Z,1510165192.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:52.961Z,1510165192.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:52.000Z,1510165193.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:53.370Z,1510165193.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:53.402Z,1510165193.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:53.758Z,1510165193.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:53.774Z,1510165193.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:54.151Z,1510165194.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:54.179Z,1510165194.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:54.558Z,1510165194.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:54.575Z,1510165194.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:54.959Z,1510165194.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:54.975Z,1510165194.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:55.357Z,1510165195.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:55.374Z,1510165195.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:55.763Z,1510165195.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:55.780Z,1510165195.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:56.166Z,1510165196.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:56.182Z,1510165196.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:56.563Z,1510165196.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:56.587Z,1510165196.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:56.957Z,1510165196.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:56.976Z,1510165196.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:57.354Z,1510165197.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:57.371Z,1510165197.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:57.758Z,1510165197.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:57.776Z,1510165197.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:58.156Z,1510165198.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:58.173Z,1510165198.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:58.565Z,1510165198.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:58.588Z,1510165198.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:58.966Z,1510165198.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:59.005Z,1510165199.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:59.362Z,1510165199.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:59.384Z,1510165199.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:19:59.758Z,1510165199.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:19:59.775Z,1510165199.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:00.157Z,1510165200.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:00.176Z,1510165200.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:00.557Z,1510165200.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:00.574Z,1510165200.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:00.954Z,1510165200.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:00.970Z,1510165200.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:01.362Z,1510165201.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:01.437Z,1510165201.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:01.734Z,1510165201.734 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T18:20:01.734Z,1510165201.734 [NAL9602] Data Fault, FailCount= 3
2017-11-08T18:20:01.734Z,1510165201.734 [NAL9602](ERROR): Data Fault
2017-11-08T18:20:01.778Z,1510165201.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:01.856Z,1510165201.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:01.958Z,1510165201.958 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T18:20:02.134Z,1510165202.134 [NAL9602](INFO): Powering down
2017-11-08T18:20:02.165Z,1510165202.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:02.208Z,1510165202.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:02.552Z,1510165202.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:02.631Z,1510165202.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:02.951Z,1510165202.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:02.982Z,1510165202.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:03.066Z,1510165203.066 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T18:20:03.066Z,1510165203.066 [NAL9602] No Fault, FailCount= 3
2017-11-08T18:20:03.351Z,1510165203.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:03.392Z,1510165203.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:03.751Z,1510165203.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:03.788Z,1510165203.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:04.155Z,1510165204.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:04.187Z,1510165204.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:04.550Z,1510165204.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:04.583Z,1510165204.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:04.947Z,1510165204.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:04.972Z,1510165204.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:05.355Z,1510165205.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:05.387Z,1510165205.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:05.751Z,1510165205.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:05.789Z,1510165205.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:06.147Z,1510165206.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:06.164Z,1510165206.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:06.551Z,1510165206.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:06.588Z,1510165206.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:06.951Z,1510165206.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:06.967Z,1510165206.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:07.355Z,1510165207.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:07.372Z,1510165207.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:07.751Z,1510165207.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:07.790Z,1510165207.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:08.153Z,1510165208.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:08.170Z,1510165208.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:08.553Z,1510165208.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:08.570Z,1510165208.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:11.643Z,1510165211.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:11.698Z,1510165211.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:11.807Z,1510165211.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:11.846Z,1510165211.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:12.213Z,1510165212.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:12.229Z,1510165212.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:12.611Z,1510165212.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:12.628Z,1510165212.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:13.011Z,1510165213.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:13.028Z,1510165213.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:13.406Z,1510165213.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:13.422Z,1510165213.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:13.806Z,1510165213.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:13.823Z,1510165213.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:14.206Z,1510165214.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:14.223Z,1510165214.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:14.606Z,1510165214.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:14.622Z,1510165214.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:15.006Z,1510165215.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:15.023Z,1510165215.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:15.402Z,1510165215.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:15.418Z,1510165215.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:15.806Z,1510165215.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:15.822Z,1510165215.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:16.206Z,1510165216.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:16.223Z,1510165216.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:16.606Z,1510165216.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:16.622Z,1510165216.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:17.007Z,1510165217.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:17.023Z,1510165217.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:17.407Z,1510165217.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:17.428Z,1510165217.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:17.802Z,1510165217.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:17.819Z,1510165217.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:18.207Z,1510165218.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:18.223Z,1510165218.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:18.607Z,1510165218.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:18.628Z,1510165218.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:19.002Z,1510165219.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:19.019Z,1510165219.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:19.407Z,1510165219.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:19.423Z,1510165219.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:19.807Z,1510165219.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:19.828Z,1510165219.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:20.203Z,1510165220.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:20.219Z,1510165220.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:20.607Z,1510165220.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:20.623Z,1510165220.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:21.007Z,1510165221.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:21.028Z,1510165221.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:21.407Z,1510165221.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:21.423Z,1510165221.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:21.807Z,1510165221.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:21.823Z,1510165221.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:22.203Z,1510165222.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:22.223Z,1510165222.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:22.607Z,1510165222.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:22.623Z,1510165222.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:23.007Z,1510165223.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:23.023Z,1510165223.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:23.407Z,1510165223.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:23.423Z,1510165223.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:23.802Z,1510165223.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:23.877Z,1510165223.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:24.206Z,1510165224.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:24.273Z,1510165224.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:24.602Z,1510165224.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:24.618Z,1510165224.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:25.002Z,1510165225.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:25.018Z,1510165225.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:25.406Z,1510165225.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:25.462Z,1510165225.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:25.806Z,1510165225.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:25.821Z,1510165225.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:26.202Z,1510165226.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:26.259Z,1510165226.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:26.606Z,1510165226.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:26.621Z,1510165226.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:27.002Z,1510165227.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:27.017Z,1510165227.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:27.402Z,1510165227.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:27.418Z,1510165227.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:27.806Z,1510165227.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:27.822Z,1510165227.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:28.206Z,1510165228.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:28.221Z,1510165228.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:28.602Z,1510165228.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:28.618Z,1510165228.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:29.002Z,1510165229.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:29.023Z,1510165229.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:29.406Z,1510165229.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:29.421Z,1510165229.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:29.802Z,1510165229.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:29.818Z,1510165229.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:30.206Z,1510165230.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:30.221Z,1510165230.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:30.602Z,1510165230.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:30.617Z,1510165230.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:31.002Z,1510165231.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:31.018Z,1510165231.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:31.406Z,1510165231.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:31.421Z,1510165231.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:31.802Z,1510165231.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:31.817Z,1510165231.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:32.185Z,1510165232.185 [NAL9602](INFO): Powering up NAL9602
2017-11-08T18:20:32.203Z,1510165232.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:32.223Z,1510165232.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:32.606Z,1510165232.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:32.622Z,1510165232.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:33.006Z,1510165233.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:33.021Z,1510165233.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:33.404Z,1510165233.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:33.421Z,1510165233.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:33.806Z,1510165233.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:33.822Z,1510165233.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:34.206Z,1510165234.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:34.222Z,1510165234.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:34.604Z,1510165234.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:34.659Z,1510165234.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:35.006Z,1510165235.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:35.027Z,1510165235.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:35.406Z,1510165235.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:35.422Z,1510165235.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:35.804Z,1510165235.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:35.821Z,1510165235.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:36.204Z,1510165236.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:36.227Z,1510165236.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:36.606Z,1510165236.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:36.622Z,1510165236.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:37.010Z,1510165237.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:37.027Z,1510165237.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:37.407Z,1510165237.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:37.423Z,1510165237.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:37.806Z,1510165237.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:37.822Z,1510165237.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:38.206Z,1510165238.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:38.223Z,1510165238.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:38.606Z,1510165238.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:38.622Z,1510165238.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:39.005Z,1510165239.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:39.020Z,1510165239.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:39.406Z,1510165239.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:39.423Z,1510165239.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:39.806Z,1510165239.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:39.823Z,1510165239.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:40.206Z,1510165240.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:40.222Z,1510165240.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:40.606Z,1510165240.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:40.623Z,1510165240.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:41.006Z,1510165241.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:41.022Z,1510165241.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:41.406Z,1510165241.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:41.422Z,1510165241.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:41.806Z,1510165241.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:41.823Z,1510165241.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:42.206Z,1510165242.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:42.222Z,1510165242.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:42.609Z,1510165242.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:42.625Z,1510165242.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:42.990Z,1510165242.990 [NAL9602](INFO): NAL9602 initialized
2017-11-08T18:20:43.007Z,1510165243.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:43.028Z,1510165243.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:43.405Z,1510165243.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:43.422Z,1510165243.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:43.813Z,1510165243.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:43.832Z,1510165243.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:44.221Z,1510165244.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:44.257Z,1510165244.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:44.618Z,1510165244.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:44.634Z,1510165244.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:45.010Z,1510165245.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:45.031Z,1510165245.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:45.411Z,1510165245.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:45.427Z,1510165245.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:45.817Z,1510165245.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:45.842Z,1510165245.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:46.221Z,1510165246.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:46.282Z,1510165246.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:46.632Z,1510165246.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:46.728Z,1510165246.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:47.010Z,1510165247.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:47.032Z,1510165247.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:47.399Z,1510165247.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:47.493Z,1510165247.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:47.810Z,1510165247.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:47.832Z,1510165247.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:48.211Z,1510165248.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:48.227Z,1510165248.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:48.599Z,1510165248.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:48.625Z,1510165248.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:49.023Z,1510165249.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:49.047Z,1510165249.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:49.425Z,1510165249.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:49.441Z,1510165249.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:49.821Z,1510165249.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:49.829Z,1510165249.829 [BPC1](ERROR): Failed to receive battery data
2017-11-08T18:20:49.829Z,1510165249.829 [BPC1] Communications Fault, FailCount= 1
2017-11-08T18:20:49.829Z,1510165249.829 [BPC1](ERROR): Communications Fault
2017-11-08T18:20:49.838Z,1510165249.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:49.921Z,1510165249.921 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T18:20:50.214Z,1510165250.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:50.233Z,1510165250.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:50.603Z,1510165250.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:50.635Z,1510165250.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:51.000Z,1510165251.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:51.032Z,1510165251.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:51.110Z,1510165251.110 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T18:20:51.110Z,1510165251.110 [BPC1] No Fault, FailCount= 1
2017-11-08T18:20:51.404Z,1510165251.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:51.483Z,1510165251.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:51.821Z,1510165251.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:51.838Z,1510165251.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:52.221Z,1510165252.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:52.237Z,1510165252.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:52.624Z,1510165252.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:52.648Z,1510165252.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:53.004Z,1510165253.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:53.039Z,1510165253.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:53.399Z,1510165253.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:53.426Z,1510165253.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:53.824Z,1510165253.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:53.847Z,1510165253.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:54.224Z,1510165254.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:54.247Z,1510165254.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:54.619Z,1510165254.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:54.647Z,1510165254.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:55.004Z,1510165255.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:55.038Z,1510165255.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:55.403Z,1510165255.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:55.432Z,1510165255.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:55.820Z,1510165255.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:55.836Z,1510165255.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:56.220Z,1510165256.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:56.244Z,1510165256.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:56.620Z,1510165256.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:56.637Z,1510165256.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:56.000Z,1510165257.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:57.035Z,1510165257.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:57.403Z,1510165257.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:57.429Z,1510165257.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:57.820Z,1510165257.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:57.836Z,1510165257.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:58.221Z,1510165258.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:58.237Z,1510165258.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:58.617Z,1510165258.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:58.644Z,1510165258.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:59.004Z,1510165259.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:59.030Z,1510165259.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:59.403Z,1510165259.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:59.431Z,1510165259.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:20:59.818Z,1510165259.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:20:59.872Z,1510165259.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:00.225Z,1510165260.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:00.242Z,1510165260.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:00.619Z,1510165260.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:00.647Z,1510165260.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:01.004Z,1510165261.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:01.031Z,1510165261.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:01.404Z,1510165261.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:01.430Z,1510165261.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:01.827Z,1510165261.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:01.843Z,1510165261.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:02.225Z,1510165262.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:02.241Z,1510165262.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:02.624Z,1510165262.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:02.641Z,1510165262.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:02.000Z,1510165263.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:03.036Z,1510165263.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:03.399Z,1510165263.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:03.431Z,1510165263.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:03.820Z,1510165263.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:03.844Z,1510165263.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:04.224Z,1510165264.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:04.241Z,1510165264.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:04.614Z,1510165264.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:04.637Z,1510165264.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:05.020Z,1510165265.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:05.037Z,1510165265.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:05.399Z,1510165265.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:05.427Z,1510165265.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:05.810Z,1510165265.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:05.843Z,1510165265.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:06.224Z,1510165266.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:06.241Z,1510165266.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:06.625Z,1510165266.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:06.641Z,1510165266.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:06.000Z,1510165267.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:07.028Z,1510165267.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:07.402Z,1510165267.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:07.434Z,1510165267.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:07.831Z,1510165267.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:07.847Z,1510165267.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:07.850Z,1510165267.850 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T18:21:07.850Z,1510165267.850 [Default:CheckIn:C.Wait] Stopped
2017-11-08T18:21:07.850Z,1510165267.850 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T18:21:07.850Z,1510165267.850 [Default:CheckIn:D] Running Loop=1
2017-11-08T18:21:08.228Z,1510165268.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:08.252Z,1510165268.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:08.255Z,1510165268.255 [Default:CheckIn:D] Stopped
2017-11-08T18:21:08.255Z,1510165268.255 [Default:CheckIn:E] Running Loop=1
2017-11-08T18:21:08.618Z,1510165268.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:08.648Z,1510165268.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:08.651Z,1510165268.651 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 294.454590 min 
2017-11-08T18:21:08.651Z,1510165268.651 [Default:CheckIn:E] Stopped
2017-11-08T18:21:08.652Z,1510165268.652 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T18:21:08.652Z,1510165268.652 [Default:CheckIn] Stopped
2017-11-08T18:21:08.652Z,1510165268.652 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T18:21:08.652Z,1510165268.652 [Default:CheckIn](INFO): Running loop #17
2017-11-08T18:21:08.652Z,1510165268.652 [Default:CheckIn] Running Loop=17
2017-11-08T18:21:08.652Z,1510165268.652 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T18:21:08.652Z,1510165268.652 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T18:21:11.715Z,1510165271.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:11.817Z,1510165271.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:11.947Z,1510165271.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:11.993Z,1510165271.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:12.358Z,1510165272.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:12.374Z,1510165272.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:12.753Z,1510165272.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:12.802Z,1510165272.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:13.158Z,1510165273.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:13.174Z,1510165273.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:13.543Z,1510165273.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:13.596Z,1510165273.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:13.947Z,1510165273.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:13.963Z,1510165273.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:14.346Z,1510165274.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:14.363Z,1510165274.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:14.738Z,1510165274.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:14.764Z,1510165274.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:15.156Z,1510165275.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:15.175Z,1510165275.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:15.555Z,1510165275.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:15.571Z,1510165275.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:15.955Z,1510165275.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:15.975Z,1510165275.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:16.346Z,1510165276.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:16.362Z,1510165276.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:16.741Z,1510165276.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:16.762Z,1510165276.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:17.146Z,1510165277.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:17.163Z,1510165277.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:17.535Z,1510165277.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:17.561Z,1510165277.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:17.957Z,1510165277.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:17.974Z,1510165277.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:18.358Z,1510165278.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:18.374Z,1510165278.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:18.759Z,1510165278.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:18.774Z,1510165278.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:19.135Z,1510165279.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:19.160Z,1510165279.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:19.543Z,1510165279.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:19.564Z,1510165279.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:19.935Z,1510165279.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:19.971Z,1510165279.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:20.337Z,1510165280.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:20.369Z,1510165280.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:20.739Z,1510165280.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:20.773Z,1510165280.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:21.161Z,1510165281.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:21.177Z,1510165281.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:21.550Z,1510165281.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:21.582Z,1510165281.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:21.950Z,1510165281.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:22.017Z,1510165282.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:22.335Z,1510165282.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:22.375Z,1510165282.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:22.735Z,1510165282.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:22.772Z,1510165282.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:23.139Z,1510165283.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:23.176Z,1510165283.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:23.535Z,1510165283.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:23.551Z,1510165283.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:23.950Z,1510165283.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:23.982Z,1510165283.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:24.353Z,1510165284.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:24.381Z,1510165284.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:24.753Z,1510165284.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:24.781Z,1510165284.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:25.135Z,1510165285.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:25.155Z,1510165285.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:25.539Z,1510165285.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:25.555Z,1510165285.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:25.940Z,1510165285.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:25.956Z,1510165285.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:26.346Z,1510165286.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:26.379Z,1510165286.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:26.743Z,1510165286.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:26.759Z,1510165286.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:27.149Z,1510165287.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:27.184Z,1510165287.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:27.554Z,1510165287.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:27.587Z,1510165287.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:27.954Z,1510165287.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:27.986Z,1510165287.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:28.338Z,1510165288.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:28.354Z,1510165288.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:28.742Z,1510165288.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:28.758Z,1510165288.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:29.143Z,1510165289.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:29.160Z,1510165289.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:29.539Z,1510165289.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:29.559Z,1510165289.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:29.955Z,1510165289.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:29.988Z,1510165289.988 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:29.988Z,1510165289.988 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99
2017-11-08T18:21:29.988Z,1510165289.988 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T18:21:29.990Z,1510165289.990 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:29.990Z,1510165289.990 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99
2017-11-08T18:21:29.990Z,1510165289.990 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T18:21:29.992Z,1510165289.992 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:29.992Z,1510165289.992 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 99
2017-11-08T18:21:29.992Z,1510165289.992 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T18:21:30.069Z,1510165290.069 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T18:21:30.069Z,1510165290.069 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T18:21:30.069Z,1510165290.069 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T18:21:30.362Z,1510165290.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:30.473Z,1510165290.473 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T18:21:30.473Z,1510165290.473 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99
2017-11-08T18:21:30.473Z,1510165290.473 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T18:21:30.473Z,1510165290.473 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99
2017-11-08T18:21:30.474Z,1510165290.474 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T18:21:30.474Z,1510165290.474 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 99
2017-11-08T18:21:30.753Z,1510165290.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:30.774Z,1510165290.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T18:21:30.775Z,1510165290.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:21:30.775Z,1510165290.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:21:30.775Z,1510165290.775 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T18:21:30.776Z,1510165290.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:21:30.776Z,1510165290.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:21:30.803Z,1510165290.803 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T18:21:30.803Z,1510165290.803 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:21:30.804Z,1510165290.804 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:21:31.150Z,1510165291.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:31.175Z,1510165291.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T18:21:31.176Z,1510165291.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:31.544Z,1510165291.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:31.565Z,1510165291.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T18:21:31.566Z,1510165291.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:31.947Z,1510165291.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:31.962Z,1510165291.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T18:21:31.963Z,1510165291.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:32.346Z,1510165292.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:32.409Z,1510165292.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T18:21:32.410Z,1510165292.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:32.745Z,1510165292.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:32.767Z,1510165292.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T18:21:32.768Z,1510165292.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:33.159Z,1510165293.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:33.179Z,1510165293.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T18:21:33.180Z,1510165293.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:33.559Z,1510165293.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:33.583Z,1510165293.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T18:21:33.584Z,1510165293.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:33.954Z,1510165293.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:34.026Z,1510165294.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T18:21:34.027Z,1510165294.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:34.339Z,1510165294.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:34.364Z,1510165294.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T18:21:34.365Z,1510165294.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:34.740Z,1510165294.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:34.765Z,1510165294.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T18:21:34.766Z,1510165294.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:35.142Z,1510165295.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:35.209Z,1510165295.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T18:21:35.210Z,1510165295.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:35.540Z,1510165295.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:35.567Z,1510165295.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T18:21:35.568Z,1510165295.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:35.950Z,1510165295.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:36.011Z,1510165296.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T18:21:36.012Z,1510165296.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:36.359Z,1510165296.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:36.375Z,1510165296.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T18:21:36.376Z,1510165296.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:36.752Z,1510165296.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:36.782Z,1510165296.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T18:21:36.783Z,1510165296.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:37.135Z,1510165297.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:37.167Z,1510165297.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T18:21:37.168Z,1510165297.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:37.539Z,1510165297.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:37.575Z,1510165297.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T18:21:37.576Z,1510165297.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:37.939Z,1510165297.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:37.975Z,1510165297.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T18:21:37.976Z,1510165297.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:38.340Z,1510165298.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:38.377Z,1510165298.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T18:21:38.378Z,1510165298.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:38.739Z,1510165298.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:38.780Z,1510165298.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T18:21:38.786Z,1510165298.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:39.149Z,1510165299.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:39.181Z,1510165299.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T18:21:39.182Z,1510165299.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:39.550Z,1510165299.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:39.581Z,1510165299.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T18:21:39.582Z,1510165299.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:39.954Z,1510165299.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:39.985Z,1510165299.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T18:21:39.986Z,1510165299.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:40.339Z,1510165300.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:40.355Z,1510165300.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T18:21:40.355Z,1510165300.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:40.737Z,1510165300.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:40.753Z,1510165300.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T18:21:40.754Z,1510165300.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:41.145Z,1510165301.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:41.161Z,1510165301.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T18:21:41.162Z,1510165301.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:41.539Z,1510165301.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:41.554Z,1510165301.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T18:21:41.555Z,1510165301.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:41.947Z,1510165301.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:41.963Z,1510165301.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T18:21:41.963Z,1510165301.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:42.358Z,1510165302.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:42.389Z,1510165302.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T18:21:42.390Z,1510165302.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:42.754Z,1510165302.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:42.769Z,1510165302.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T18:21:42.770Z,1510165302.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:43.141Z,1510165303.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:43.163Z,1510165303.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T18:21:43.164Z,1510165303.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:43.548Z,1510165303.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:43.567Z,1510165303.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T18:21:43.569Z,1510165303.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:43.945Z,1510165303.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:43.961Z,1510165303.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T18:21:43.962Z,1510165303.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:44.345Z,1510165304.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:44.400Z,1510165304.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T18:21:44.402Z,1510165304.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:44.746Z,1510165304.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:44.763Z,1510165304.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T18:21:44.764Z,1510165304.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:45.153Z,1510165305.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:45.170Z,1510165305.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T18:21:45.171Z,1510165305.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:45.554Z,1510165305.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:45.570Z,1510165305.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T18:21:45.571Z,1510165305.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:45.951Z,1510165305.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:45.967Z,1510165305.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T18:21:45.968Z,1510165305.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:46.342Z,1510165306.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:46.357Z,1510165306.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T18:21:46.359Z,1510165306.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:46.738Z,1510165306.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:46.762Z,1510165306.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T18:21:46.763Z,1510165306.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:47.143Z,1510165307.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:47.165Z,1510165307.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T18:21:47.166Z,1510165307.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:47.535Z,1510165307.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:47.561Z,1510165307.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T18:21:47.561Z,1510165307.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:47.950Z,1510165307.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:47.982Z,1510165307.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T18:21:47.983Z,1510165307.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:48.359Z,1510165308.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:48.380Z,1510165308.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T18:21:48.382Z,1510165308.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:48.759Z,1510165308.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:48.774Z,1510165308.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T18:21:48.775Z,1510165308.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:49.135Z,1510165309.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:49.169Z,1510165309.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T18:21:49.170Z,1510165309.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:49.543Z,1510165309.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:49.565Z,1510165309.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T18:21:49.566Z,1510165309.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:49.947Z,1510165309.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:49.967Z,1510165309.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-08T18:21:49.968Z,1510165309.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:50.347Z,1510165310.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:50.376Z,1510165310.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:50.740Z,1510165310.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:50.791Z,1510165310.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:51.163Z,1510165311.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:51.179Z,1510165311.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:51.556Z,1510165311.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:51.602Z,1510165311.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:51.950Z,1510165311.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:51.982Z,1510165311.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:52.345Z,1510165312.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:52.361Z,1510165312.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:52.745Z,1510165312.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:52.761Z,1510165312.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:53.143Z,1510165313.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:53.160Z,1510165313.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:53.542Z,1510165313.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:53.559Z,1510165313.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:53.954Z,1510165313.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:53.990Z,1510165313.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:54.354Z,1510165314.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:54.371Z,1510165314.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:54.754Z,1510165314.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:54.770Z,1510165314.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:55.147Z,1510165315.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:55.213Z,1510165315.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:55.545Z,1510165315.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:55.561Z,1510165315.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:55.942Z,1510165315.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:55.958Z,1510165315.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:56.346Z,1510165316.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:56.362Z,1510165316.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:56.745Z,1510165316.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:56.761Z,1510165316.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:57.154Z,1510165317.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:57.170Z,1510165317.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:57.558Z,1510165317.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:57.575Z,1510165317.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:57.956Z,1510165317.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:57.972Z,1510165317.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:58.335Z,1510165318.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:58.361Z,1510165318.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:58.735Z,1510165318.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:58.772Z,1510165318.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:59.140Z,1510165319.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:59.172Z,1510165319.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:59.535Z,1510165319.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:59.543Z,1510165319.543 [BPC1](ERROR): Failed to receive battery data
2017-11-08T18:21:59.543Z,1510165319.543 [BPC1] Communications Fault, FailCount= 1
2017-11-08T18:21:59.543Z,1510165319.543 [BPC1](ERROR): Communications Fault
2017-11-08T18:21:59.567Z,1510165319.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:21:59.665Z,1510165319.665 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T18:21:59.950Z,1510165319.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:21:59.975Z,1510165319.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:00.354Z,1510165320.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:00.384Z,1510165320.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:00.749Z,1510165320.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:00.776Z,1510165320.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:00.860Z,1510165320.860 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T18:22:00.860Z,1510165320.860 [BPC1] No Fault, FailCount= 1
2017-11-08T18:22:01.135Z,1510165321.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:01.219Z,1510165321.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:01.539Z,1510165321.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:01.580Z,1510165321.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:01.939Z,1510165321.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:01.955Z,1510165321.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:02.339Z,1510165322.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:02.376Z,1510165322.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:02.739Z,1510165322.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:02.755Z,1510165322.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:03.153Z,1510165323.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:03.185Z,1510165323.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:03.550Z,1510165323.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:03.578Z,1510165323.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:03.954Z,1510165323.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:03.991Z,1510165323.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:04.342Z,1510165324.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:04.358Z,1510165324.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:04.741Z,1510165324.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:04.757Z,1510165324.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:05.150Z,1510165325.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:05.171Z,1510165325.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:05.542Z,1510165325.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:05.558Z,1510165325.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:05.947Z,1510165325.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:05.968Z,1510165325.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:06.354Z,1510165326.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:06.370Z,1510165326.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:06.754Z,1510165326.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:06.775Z,1510165326.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:07.138Z,1510165327.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:07.167Z,1510165327.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:07.545Z,1510165327.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:07.561Z,1510165327.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:07.942Z,1510165327.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:07.958Z,1510165327.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:08.347Z,1510165328.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:08.367Z,1510165328.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:08.744Z,1510165328.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:08.772Z,1510165328.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:11.907Z,1510165331.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:11.959Z,1510165331.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:12.105Z,1510165332.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:12.127Z,1510165332.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:12.506Z,1510165332.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:12.528Z,1510165332.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:12.894Z,1510165332.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:12.910Z,1510165332.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:13.294Z,1510165333.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:13.310Z,1510165333.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:13.683Z,1510165333.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:13.714Z,1510165333.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:14.104Z,1510165334.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:14.120Z,1510165334.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:14.499Z,1510165334.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:14.515Z,1510165334.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:14.900Z,1510165334.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:14.916Z,1510165334.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:15.279Z,1510165335.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:15.305Z,1510165335.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:15.679Z,1510165335.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:15.710Z,1510165335.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:16.084Z,1510165336.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:16.117Z,1510165336.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:16.483Z,1510165336.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:16.508Z,1510165336.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:16.895Z,1510165336.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:16.911Z,1510165336.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:17.303Z,1510165337.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:17.319Z,1510165337.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:17.699Z,1510165337.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:17.716Z,1510165337.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:18.079Z,1510165338.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:18.104Z,1510165338.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:18.483Z,1510165338.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:18.513Z,1510165338.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:18.883Z,1510165338.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:18.912Z,1510165338.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:19.284Z,1510165339.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:19.309Z,1510165339.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:19.683Z,1510165339.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:19.708Z,1510165339.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:20.100Z,1510165340.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:20.116Z,1510165340.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:20.498Z,1510165340.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:20.528Z,1510165340.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:20.899Z,1510165340.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:20.915Z,1510165340.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:21.283Z,1510165341.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:21.309Z,1510165341.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:21.683Z,1510165341.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:21.709Z,1510165341.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:22.084Z,1510165342.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:22.116Z,1510165342.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:22.483Z,1510165342.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:22.509Z,1510165342.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:22.899Z,1510165342.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:22.986Z,1510165342.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:23.297Z,1510165343.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:23.328Z,1510165343.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:23.698Z,1510165343.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:23.760Z,1510165343.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:24.084Z,1510165344.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:24.100Z,1510165344.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:24.484Z,1510165344.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:24.532Z,1510165344.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:24.883Z,1510165344.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:24.900Z,1510165344.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:25.284Z,1510165345.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:25.303Z,1510165345.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:25.682Z,1510165345.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:25.700Z,1510165345.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:26.098Z,1510165346.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:26.129Z,1510165346.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:26.495Z,1510165346.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:26.525Z,1510165346.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:26.898Z,1510165346.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:26.930Z,1510165346.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:27.287Z,1510165347.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:27.303Z,1510165347.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:27.680Z,1510165347.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:27.697Z,1510165347.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:28.087Z,1510165348.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:28.107Z,1510165348.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:28.487Z,1510165348.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:28.508Z,1510165348.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:28.894Z,1510165348.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:28.926Z,1510165348.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:29.297Z,1510165349.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:29.332Z,1510165349.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:29.698Z,1510165349.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:29.732Z,1510165349.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:30.083Z,1510165350.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:30.099Z,1510165350.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:30.486Z,1510165350.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:30.503Z,1510165350.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:30.887Z,1510165350.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:30.908Z,1510165350.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:31.287Z,1510165351.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:31.303Z,1510165351.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:31.687Z,1510165351.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:31.703Z,1510165351.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:32.098Z,1510165352.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:32.130Z,1510165352.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:32.498Z,1510165352.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:32.530Z,1510165352.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:32.898Z,1510165352.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:32.944Z,1510165352.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:33.287Z,1510165353.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:33.308Z,1510165353.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:33.687Z,1510165353.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:33.703Z,1510165353.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:34.087Z,1510165354.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:34.108Z,1510165354.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:34.487Z,1510165354.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:34.503Z,1510165354.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:34.890Z,1510165354.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:34.907Z,1510165354.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:35.298Z,1510165355.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:35.314Z,1510165355.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:35.698Z,1510165355.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:35.714Z,1510165355.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:36.088Z,1510165356.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:36.105Z,1510165356.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:36.488Z,1510165356.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:36.505Z,1510165356.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:36.889Z,1510165356.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:36.906Z,1510165356.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:37.291Z,1510165357.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:37.308Z,1510165357.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:37.682Z,1510165357.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:37.710Z,1510165357.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:38.098Z,1510165358.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:38.114Z,1510165358.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:38.497Z,1510165358.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:38.514Z,1510165358.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:38.895Z,1510165358.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:38.912Z,1510165358.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:39.289Z,1510165359.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:39.305Z,1510165359.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:39.689Z,1510165359.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:39.706Z,1510165359.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:40.088Z,1510165360.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:40.121Z,1510165360.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:40.483Z,1510165360.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:40.506Z,1510165360.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:40.898Z,1510165360.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:40.916Z,1510165360.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:41.298Z,1510165361.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:41.314Z,1510165361.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:41.698Z,1510165361.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:41.715Z,1510165361.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:42.086Z,1510165362.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:42.103Z,1510165362.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:42.490Z,1510165362.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:42.519Z,1510165362.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:42.887Z,1510165362.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:42.918Z,1510165362.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:43.286Z,1510165363.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:43.295Z,1510165363.295 [BPC1](ERROR): Failed to parse message.
2017-11-08T18:22:43.295Z,1510165363.295 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T18:22:43.295Z,1510165363.295 [BPC1] Data Fault, FailCount= 1
2017-11-08T18:22:43.295Z,1510165363.295 [BPC1](ERROR): Data Fault
2017-11-08T18:22:43.305Z,1510165363.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:43.381Z,1510165363.381 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T18:22:43.686Z,1510165363.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:43.715Z,1510165363.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:44.102Z,1510165364.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:44.118Z,1510165364.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:44.514Z,1510165364.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:44.553Z,1510165364.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:44.633Z,1510165364.633 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T18:22:44.633Z,1510165364.633 [BPC1] No Fault, FailCount= 1
2017-11-08T18:22:44.898Z,1510165364.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:44.984Z,1510165364.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:45.291Z,1510165365.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:45.312Z,1510165365.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:45.683Z,1510165365.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:45.705Z,1510165365.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:46.091Z,1510165366.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:46.107Z,1510165366.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:46.487Z,1510165366.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:46.508Z,1510165366.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:46.895Z,1510165366.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:46.916Z,1510165366.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:47.298Z,1510165367.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:47.315Z,1510165367.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:47.696Z,1510165367.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:47.712Z,1510165367.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:48.083Z,1510165368.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:48.104Z,1510165368.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:48.488Z,1510165368.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:48.506Z,1510165368.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:48.886Z,1510165368.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:48.908Z,1510165368.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:49.286Z,1510165369.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:49.302Z,1510165369.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:49.692Z,1510165369.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:49.709Z,1510165369.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:50.095Z,1510165370.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:50.110Z,1510165370.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:50.494Z,1510165370.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:50.515Z,1510165370.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:50.894Z,1510165370.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:50.911Z,1510165370.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:51.286Z,1510165371.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:51.307Z,1510165371.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:51.683Z,1510165371.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:51.704Z,1510165371.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:52.089Z,1510165372.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:52.106Z,1510165372.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:52.486Z,1510165372.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:52.501Z,1510165372.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:52.894Z,1510165372.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:52.916Z,1510165372.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:53.297Z,1510165373.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:53.351Z,1510165373.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:53.697Z,1510165373.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:53.713Z,1510165373.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:54.083Z,1510165374.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:54.107Z,1510165374.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:54.488Z,1510165374.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:54.505Z,1510165374.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:54.890Z,1510165374.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:54.905Z,1510165374.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:54.992Z,1510165374.992 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T18:22:55.283Z,1510165375.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:55.304Z,1510165375.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:55.688Z,1510165375.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:55.705Z,1510165375.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:56.094Z,1510165376.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:56.110Z,1510165376.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:56.494Z,1510165376.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:56.515Z,1510165376.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:56.894Z,1510165376.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:56.916Z,1510165376.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:57.286Z,1510165377.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:57.307Z,1510165377.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:57.683Z,1510165377.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:57.712Z,1510165377.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:58.090Z,1510165378.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:58.106Z,1510165378.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:58.486Z,1510165378.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:58.507Z,1510165378.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:58.895Z,1510165378.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:58.916Z,1510165378.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:59.298Z,1510165379.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:59.314Z,1510165379.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:22:59.695Z,1510165379.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:22:59.711Z,1510165379.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:00.093Z,1510165380.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:00.110Z,1510165380.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:00.490Z,1510165380.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:00.507Z,1510165380.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:00.887Z,1510165380.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:00.903Z,1510165380.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:01.292Z,1510165381.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:01.308Z,1510165381.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:01.688Z,1510165381.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:01.709Z,1510165381.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:02.098Z,1510165382.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:02.115Z,1510165382.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:02.499Z,1510165382.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:02.515Z,1510165382.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:02.895Z,1510165382.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:02.915Z,1510165382.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:03.283Z,1510165383.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:03.311Z,1510165383.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:03.689Z,1510165383.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:03.706Z,1510165383.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:04.090Z,1510165384.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:04.175Z,1510165384.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:04.490Z,1510165384.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:04.506Z,1510165384.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:04.903Z,1510165384.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:04.955Z,1510165384.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:05.302Z,1510165385.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:05.319Z,1510165385.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:05.700Z,1510165385.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:05.749Z,1510165385.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:06.089Z,1510165386.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:06.111Z,1510165386.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:06.487Z,1510165386.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:06.508Z,1510165386.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:06.879Z,1510165386.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:06.904Z,1510165386.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:07.290Z,1510165387.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:07.311Z,1510165387.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:07.689Z,1510165387.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:07.705Z,1510165387.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:08.103Z,1510165388.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:08.118Z,1510165388.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:08.502Z,1510165388.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:08.524Z,1510165388.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:08.902Z,1510165388.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:08.924Z,1510165388.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:11.963Z,1510165391.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:12.004Z,1510165392.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:12.127Z,1510165392.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:12.157Z,1510165392.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:12.544Z,1510165392.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:12.561Z,1510165392.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:12.944Z,1510165392.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:12.959Z,1510165392.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:13.344Z,1510165393.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:13.360Z,1510165393.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:13.723Z,1510165393.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:13.797Z,1510165393.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:14.124Z,1510165394.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:14.149Z,1510165394.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:14.523Z,1510165394.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:14.549Z,1510165394.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:14.940Z,1510165394.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:14.957Z,1510165394.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:15.340Z,1510165395.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:15.356Z,1510165395.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:15.744Z,1510165395.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:15.760Z,1510165395.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:16.124Z,1510165396.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:16.157Z,1510165396.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:16.520Z,1510165396.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:16.548Z,1510165396.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:16.924Z,1510165396.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:16.960Z,1510165396.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:17.324Z,1510165397.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:17.361Z,1510165397.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:17.719Z,1510165397.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:17.735Z,1510165397.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:18.138Z,1510165398.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:18.169Z,1510165398.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:18.538Z,1510165398.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:18.570Z,1510165398.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:18.934Z,1510165398.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:18.977Z,1510165398.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:19.323Z,1510165399.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:19.340Z,1510165399.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:19.723Z,1510165399.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:19.744Z,1510165399.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:20.128Z,1510165400.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:20.143Z,1510165400.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:20.527Z,1510165400.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:20.548Z,1510165400.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:20.938Z,1510165400.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:20.971Z,1510165400.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:21.341Z,1510165401.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:21.376Z,1510165401.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:21.738Z,1510165401.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:21.770Z,1510165401.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:22.124Z,1510165402.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:22.153Z,1510165402.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:22.524Z,1510165402.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:22.545Z,1510165402.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:22.927Z,1510165402.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:22.948Z,1510165402.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:23.327Z,1510165403.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:23.343Z,1510165403.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:23.727Z,1510165403.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:23.747Z,1510165403.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:24.138Z,1510165404.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:24.171Z,1510165404.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:24.538Z,1510165404.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:24.602Z,1510165404.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:24.933Z,1510165404.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:24.949Z,1510165404.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:25.329Z,1510165405.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:25.345Z,1510165405.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:25.729Z,1510165405.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:25.745Z,1510165405.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:26.128Z,1510165406.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:26.147Z,1510165406.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:26.531Z,1510165406.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:26.591Z,1510165406.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:26.944Z,1510165406.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:26.961Z,1510165406.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:27.344Z,1510165407.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:27.393Z,1510165407.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:27.740Z,1510165407.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:27.756Z,1510165407.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:28.120Z,1510165408.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:28.152Z,1510165408.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:28.519Z,1510165408.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:28.557Z,1510165408.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:28.919Z,1510165408.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:28.952Z,1510165408.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:29.324Z,1510165409.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:29.361Z,1510165409.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:29.719Z,1510165409.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:29.736Z,1510165409.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:30.130Z,1510165410.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:30.163Z,1510165410.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:30.537Z,1510165410.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:30.571Z,1510165410.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:30.933Z,1510165410.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:30.965Z,1510165410.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:31.327Z,1510165411.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:31.347Z,1510165411.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:31.726Z,1510165411.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:31.742Z,1510165411.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:32.126Z,1510165412.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:32.142Z,1510165412.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:32.525Z,1510165412.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:32.541Z,1510165412.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:32.938Z,1510165412.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:32.966Z,1510165412.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:33.333Z,1510165413.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:33.349Z,1510165413.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:33.730Z,1510165413.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:33.746Z,1510165413.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:34.126Z,1510165414.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:34.142Z,1510165414.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:34.525Z,1510165414.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:34.541Z,1510165414.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:34.925Z,1510165414.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:34.941Z,1510165414.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:35.327Z,1510165415.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:35.348Z,1510165415.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:35.726Z,1510165415.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:35.784Z,1510165415.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:36.138Z,1510165416.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:36.154Z,1510165416.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:36.537Z,1510165416.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:36.554Z,1510165416.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:36.937Z,1510165416.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:36.959Z,1510165416.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:37.328Z,1510165417.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:37.344Z,1510165417.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:37.728Z,1510165417.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:37.744Z,1510165417.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:38.126Z,1510165418.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:38.147Z,1510165418.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:38.522Z,1510165418.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:38.551Z,1510165418.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:38.934Z,1510165418.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:38.950Z,1510165418.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:39.333Z,1510165419.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:39.349Z,1510165419.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:39.731Z,1510165419.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:39.751Z,1510165419.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:40.128Z,1510165420.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:40.145Z,1510165420.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:40.529Z,1510165420.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:40.545Z,1510165420.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:40.922Z,1510165420.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:40.951Z,1510165420.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:41.324Z,1510165421.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:41.345Z,1510165421.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:41.729Z,1510165421.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:41.745Z,1510165421.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:42.130Z,1510165422.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:42.148Z,1510165422.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:42.538Z,1510165422.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:42.554Z,1510165422.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:42.934Z,1510165422.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:42.955Z,1510165422.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:43.329Z,1510165423.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:43.345Z,1510165423.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:43.728Z,1510165423.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:43.745Z,1510165423.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:44.128Z,1510165424.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:44.152Z,1510165424.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:44.529Z,1510165424.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:44.546Z,1510165424.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:44.934Z,1510165424.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:44.956Z,1510165424.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:45.337Z,1510165425.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:45.354Z,1510165425.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:45.734Z,1510165425.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:45.756Z,1510165425.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:46.129Z,1510165426.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:46.145Z,1510165426.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:46.530Z,1510165426.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:46.546Z,1510165426.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:46.929Z,1510165426.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:46.999Z,1510165426.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:47.330Z,1510165427.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:47.346Z,1510165427.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:47.730Z,1510165427.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:47.746Z,1510165427.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:48.138Z,1510165428.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:48.207Z,1510165428.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:48.542Z,1510165428.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:48.559Z,1510165428.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:48.943Z,1510165428.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:48.959Z,1510165428.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:49.329Z,1510165429.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:49.386Z,1510165429.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:49.729Z,1510165429.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:49.745Z,1510165429.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:50.130Z,1510165430.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:50.188Z,1510165430.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:50.529Z,1510165430.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:50.545Z,1510165430.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:50.940Z,1510165430.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:50.956Z,1510165430.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:51.343Z,1510165431.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:51.359Z,1510165431.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:51.734Z,1510165431.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:51.763Z,1510165431.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:52.127Z,1510165432.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:52.148Z,1510165432.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:52.530Z,1510165432.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:52.546Z,1510165432.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:52.919Z,1510165432.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:52.950Z,1510165432.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:53.327Z,1510165433.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:53.357Z,1510165433.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:53.734Z,1510165433.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:53.750Z,1510165433.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:54.140Z,1510165434.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:54.156Z,1510165434.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:54.543Z,1510165434.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:54.564Z,1510165434.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:54.943Z,1510165434.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:54.959Z,1510165434.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:55.330Z,1510165435.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:55.351Z,1510165435.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:55.727Z,1510165435.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:55.749Z,1510165435.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:56.131Z,1510165436.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:56.147Z,1510165436.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:56.519Z,1510165436.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:56.545Z,1510165436.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:56.939Z,1510165436.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:56.960Z,1510165436.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:57.340Z,1510165437.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:57.363Z,1510165437.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:57.734Z,1510165437.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:57.762Z,1510165437.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:58.123Z,1510165438.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:58.155Z,1510165438.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:58.519Z,1510165438.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:58.576Z,1510165438.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:58.923Z,1510165438.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:58.956Z,1510165438.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:59.323Z,1510165439.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:59.354Z,1510165439.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:23:59.719Z,1510165439.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:23:59.751Z,1510165439.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:00.140Z,1510165440.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:00.156Z,1510165440.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:00.543Z,1510165440.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:00.567Z,1510165440.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:00.944Z,1510165440.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:00.967Z,1510165440.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:01.323Z,1510165441.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:01.352Z,1510165441.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:01.723Z,1510165441.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:01.754Z,1510165441.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:02.124Z,1510165442.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:02.149Z,1510165442.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:02.519Z,1510165442.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:02.550Z,1510165442.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:02.943Z,1510165442.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:02.967Z,1510165442.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:03.344Z,1510165443.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:03.360Z,1510165443.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:03.733Z,1510165443.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:03.764Z,1510165443.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:04.123Z,1510165444.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:04.168Z,1510165444.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:04.519Z,1510165444.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:04.557Z,1510165444.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:04.923Z,1510165444.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:04.955Z,1510165444.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:05.328Z,1510165445.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:05.360Z,1510165445.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:05.724Z,1510165445.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:05.755Z,1510165445.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:06.141Z,1510165446.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:06.164Z,1510165446.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:06.544Z,1510165446.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:06.561Z,1510165446.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:06.941Z,1510165446.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:06.958Z,1510165446.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:07.324Z,1510165447.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:07.355Z,1510165447.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:07.723Z,1510165447.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:07.756Z,1510165447.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:08.124Z,1510165448.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:08.154Z,1510165448.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:08.527Z,1510165448.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:08.554Z,1510165448.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:08.945Z,1510165448.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:09.017Z,1510165449.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:12.040Z,1510165452.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:12.077Z,1510165452.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:12.245Z,1510165452.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:12.283Z,1510165452.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:12.623Z,1510165452.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:12.672Z,1510165452.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:13.020Z,1510165453.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:13.056Z,1510165453.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:13.415Z,1510165453.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:13.467Z,1510165453.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:13.830Z,1510165453.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:13.862Z,1510165453.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:14.228Z,1510165454.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:14.254Z,1510165454.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:14.630Z,1510165454.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:14.665Z,1510165454.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:15.020Z,1510165455.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:15.048Z,1510165455.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:15.416Z,1510165455.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:15.431Z,1510165455.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:15.816Z,1510165455.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:15.832Z,1510165455.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:16.220Z,1510165456.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:16.258Z,1510165456.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:16.615Z,1510165456.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:16.631Z,1510165456.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:17.031Z,1510165457.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:17.057Z,1510165457.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:17.434Z,1510165457.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:17.464Z,1510165457.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:17.830Z,1510165457.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:17.855Z,1510165457.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:18.223Z,1510165458.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:18.260Z,1510165458.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:18.619Z,1510165458.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:18.660Z,1510165458.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:19.016Z,1510165459.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:19.032Z,1510165459.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:19.419Z,1510165459.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:19.440Z,1510165459.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:19.833Z,1510165459.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:19.867Z,1510165459.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:20.237Z,1510165460.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:20.265Z,1510165460.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:20.630Z,1510165460.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:20.662Z,1510165460.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:21.023Z,1510165461.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:21.043Z,1510165461.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:21.422Z,1510165461.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:21.438Z,1510165461.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:21.818Z,1510165461.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:21.876Z,1510165461.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:22.223Z,1510165462.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:22.243Z,1510165462.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:22.622Z,1510165462.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:22.638Z,1510165462.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:23.034Z,1510165463.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:23.066Z,1510165463.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:23.433Z,1510165463.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:23.450Z,1510165463.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:23.829Z,1510165463.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:23.851Z,1510165463.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:24.221Z,1510165464.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:24.242Z,1510165464.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:24.625Z,1510165464.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:24.642Z,1510165464.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:25.027Z,1510165465.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:25.042Z,1510165465.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:25.425Z,1510165465.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:25.442Z,1510165465.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:25.835Z,1510165465.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:25.852Z,1510165465.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:26.236Z,1510165466.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:26.259Z,1510165466.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:26.635Z,1510165466.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:26.652Z,1510165466.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:27.026Z,1510165467.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:27.087Z,1510165467.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:27.426Z,1510165467.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:27.442Z,1510165467.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:27.815Z,1510165467.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:27.846Z,1510165467.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:28.223Z,1510165468.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:28.245Z,1510165468.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:28.626Z,1510165468.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:28.642Z,1510165468.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:29.035Z,1510165469.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:29.059Z,1510165469.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:29.438Z,1510165469.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:29.460Z,1510165469.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:29.839Z,1510165469.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:29.859Z,1510165469.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:30.226Z,1510165470.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:30.243Z,1510165470.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:30.623Z,1510165470.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:30.645Z,1510165470.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:31.027Z,1510165471.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:31.043Z,1510165471.043 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:31.043Z,1510165471.043 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100
2017-11-08T18:24:31.043Z,1510165471.043 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T18:24:31.045Z,1510165471.045 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:31.045Z,1510165471.045 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100
2017-11-08T18:24:31.045Z,1510165471.045 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T18:24:31.047Z,1510165471.047 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:31.047Z,1510165471.047 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 100
2017-11-08T18:24:31.047Z,1510165471.047 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T18:24:31.133Z,1510165471.133 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T18:24:31.133Z,1510165471.133 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T18:24:31.133Z,1510165471.133 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T18:24:31.420Z,1510165471.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:31.533Z,1510165471.533 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T18:24:31.533Z,1510165471.533 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100
2017-11-08T18:24:31.533Z,1510165471.533 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T18:24:31.533Z,1510165471.533 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100
2017-11-08T18:24:31.534Z,1510165471.534 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T18:24:31.534Z,1510165471.534 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 100
2017-11-08T18:24:31.833Z,1510165471.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:31.848Z,1510165471.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T18:24:31.849Z,1510165471.849 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:24:31.849Z,1510165471.849 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:24:31.849Z,1510165471.849 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T18:24:31.850Z,1510165471.850 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:24:31.850Z,1510165471.850 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:24:31.851Z,1510165471.851 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T18:24:31.851Z,1510165471.851 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:24:31.851Z,1510165471.851 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:24:32.237Z,1510165472.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:32.252Z,1510165472.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T18:24:32.253Z,1510165472.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:32.637Z,1510165472.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:32.653Z,1510165472.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T18:24:32.654Z,1510165472.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:33.019Z,1510165473.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:33.053Z,1510165473.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T18:24:33.054Z,1510165473.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:33.415Z,1510165473.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:33.472Z,1510165473.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T18:24:33.473Z,1510165473.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:33.819Z,1510165473.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:33.845Z,1510165473.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T18:24:33.845Z,1510165473.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:34.220Z,1510165474.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:34.246Z,1510165474.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T18:24:34.246Z,1510165474.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:34.619Z,1510165474.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:34.668Z,1510165474.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T18:24:34.669Z,1510165474.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:35.040Z,1510165475.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:35.056Z,1510165475.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T18:24:35.057Z,1510165475.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:35.439Z,1510165475.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:35.498Z,1510165475.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-08T18:24:35.499Z,1510165475.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:35.840Z,1510165475.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:35.859Z,1510165475.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T18:24:35.860Z,1510165475.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:36.232Z,1510165476.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:36.247Z,1510165476.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T18:24:36.249Z,1510165476.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:36.619Z,1510165476.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:36.651Z,1510165476.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T18:24:36.652Z,1510165476.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:37.020Z,1510165477.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:37.045Z,1510165477.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T18:24:37.046Z,1510165477.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:37.419Z,1510165477.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:37.444Z,1510165477.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T18:24:37.445Z,1510165477.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:37.849Z,1510165477.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:37.902Z,1510165477.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-11-08T18:24:37.903Z,1510165477.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:38.240Z,1510165478.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:38.292Z,1510165478.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T18:24:38.294Z,1510165478.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:38.639Z,1510165478.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:38.655Z,1510165478.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T18:24:38.656Z,1510165478.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:39.024Z,1510165479.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:39.064Z,1510165479.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T18:24:39.077Z,1510165479.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:39.421Z,1510165479.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:39.469Z,1510165479.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T18:24:39.470Z,1510165479.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:39.823Z,1510165479.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:39.844Z,1510165479.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T18:24:39.865Z,1510165479.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:40.227Z,1510165480.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:40.247Z,1510165480.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T18:24:40.269Z,1510165480.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:40.627Z,1510165480.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:40.642Z,1510165480.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T18:24:40.643Z,1510165480.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:41.031Z,1510165481.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:41.051Z,1510165481.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T18:24:41.052Z,1510165481.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:41.442Z,1510165481.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:41.466Z,1510165481.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T18:24:41.467Z,1510165481.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:41.839Z,1510165481.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:41.878Z,1510165481.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T18:24:41.879Z,1510165481.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:42.232Z,1510165482.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:42.248Z,1510165482.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T18:24:42.249Z,1510165482.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:42.623Z,1510165482.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:42.645Z,1510165482.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T18:24:42.646Z,1510165482.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:43.027Z,1510165483.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:43.047Z,1510165483.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T18:24:43.048Z,1510165483.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:43.426Z,1510165483.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:43.447Z,1510165483.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T18:24:43.448Z,1510165483.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:43.835Z,1510165483.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:43.883Z,1510165483.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T18:24:43.884Z,1510165483.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:44.236Z,1510165484.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:44.252Z,1510165484.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T18:24:44.253Z,1510165484.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:44.636Z,1510165484.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:44.651Z,1510165484.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T18:24:44.653Z,1510165484.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:45.025Z,1510165485.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:45.041Z,1510165485.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T18:24:45.042Z,1510165485.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:45.418Z,1510165485.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:45.450Z,1510165485.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T18:24:45.451Z,1510165485.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:45.826Z,1510165485.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:45.842Z,1510165485.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T18:24:45.843Z,1510165485.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:46.223Z,1510165486.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:46.247Z,1510165486.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T18:24:46.248Z,1510165486.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:46.619Z,1510165486.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:46.648Z,1510165486.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T18:24:46.653Z,1510165486.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:47.036Z,1510165487.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:47.053Z,1510165487.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T18:24:47.054Z,1510165487.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:47.438Z,1510165487.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:47.455Z,1510165487.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T18:24:47.455Z,1510165487.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:47.839Z,1510165487.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:47.859Z,1510165487.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T18:24:47.860Z,1510165487.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:48.219Z,1510165488.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:48.259Z,1510165488.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T18:24:48.260Z,1510165488.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:48.619Z,1510165488.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:48.649Z,1510165488.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T18:24:48.650Z,1510165488.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:49.021Z,1510165489.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:49.050Z,1510165489.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T18:24:49.051Z,1510165489.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:49.419Z,1510165489.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:49.449Z,1510165489.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T18:24:49.450Z,1510165489.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:49.836Z,1510165489.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:49.851Z,1510165489.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T18:24:49.853Z,1510165489.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:50.240Z,1510165490.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:50.256Z,1510165490.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T18:24:50.257Z,1510165490.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:50.636Z,1510165490.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:50.652Z,1510165490.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T18:24:50.653Z,1510165490.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:51.020Z,1510165491.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:51.054Z,1510165491.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:51.420Z,1510165491.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:51.452Z,1510165491.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:51.815Z,1510165491.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:51.855Z,1510165491.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:52.219Z,1510165492.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:52.252Z,1510165492.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:52.620Z,1510165492.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:52.652Z,1510165492.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:53.036Z,1510165493.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:53.053Z,1510165493.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:53.440Z,1510165493.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:53.457Z,1510165493.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:53.841Z,1510165493.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:53.857Z,1510165493.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:54.220Z,1510165494.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:54.250Z,1510165494.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:54.619Z,1510165494.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:54.652Z,1510165494.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:55.020Z,1510165495.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:55.051Z,1510165495.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:55.419Z,1510165495.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:55.492Z,1510165495.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:55.838Z,1510165495.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:55.880Z,1510165495.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:56.242Z,1510165496.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:56.258Z,1510165496.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:56.630Z,1510165496.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:56.664Z,1510165496.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:57.019Z,1510165497.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:57.067Z,1510165497.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:57.415Z,1510165497.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:57.458Z,1510165497.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:57.819Z,1510165497.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:57.872Z,1510165497.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:58.220Z,1510165498.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:58.252Z,1510165498.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:58.619Z,1510165498.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:58.635Z,1510165498.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:59.030Z,1510165499.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:59.055Z,1510165499.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:59.433Z,1510165499.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:59.464Z,1510165499.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:24:59.829Z,1510165499.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:24:59.857Z,1510165499.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:00.219Z,1510165500.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:00.260Z,1510165500.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:00.619Z,1510165500.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:00.640Z,1510165500.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:01.024Z,1510165501.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:01.039Z,1510165501.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:01.419Z,1510165501.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:01.440Z,1510165501.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:01.834Z,1510165501.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:01.864Z,1510165501.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:02.233Z,1510165502.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:02.265Z,1510165502.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:02.630Z,1510165502.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:02.665Z,1510165502.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:03.022Z,1510165503.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:03.044Z,1510165503.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:03.422Z,1510165503.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:03.438Z,1510165503.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:03.819Z,1510165503.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:03.840Z,1510165503.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:04.223Z,1510165504.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:04.240Z,1510165504.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:04.619Z,1510165504.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:04.635Z,1510165504.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:05.030Z,1510165505.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:05.046Z,1510165505.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:05.437Z,1510165505.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:05.468Z,1510165505.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:05.833Z,1510165505.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:05.871Z,1510165505.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:06.219Z,1510165506.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:06.276Z,1510165506.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:06.623Z,1510165506.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:06.644Z,1510165506.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:07.023Z,1510165507.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:07.043Z,1510165507.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:07.419Z,1510165507.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:07.447Z,1510165507.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:07.834Z,1510165507.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:07.850Z,1510165507.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:08.230Z,1510165508.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:08.246Z,1510165508.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:08.638Z,1510165508.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:08.670Z,1510165508.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:09.027Z,1510165509.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:09.044Z,1510165509.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:12.114Z,1510165512.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:12.136Z,1510165512.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:12.241Z,1510165512.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:12.284Z,1510165512.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:12.665Z,1510165512.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:12.688Z,1510165512.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:13.069Z,1510165513.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:13.087Z,1510165513.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:13.464Z,1510165513.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:13.481Z,1510165513.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:13.843Z,1510165513.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:13.878Z,1510165513.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:14.239Z,1510165514.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:14.255Z,1510165514.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:14.643Z,1510165514.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:14.677Z,1510165514.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:15.054Z,1510165515.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:15.084Z,1510165515.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:15.464Z,1510165515.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:15.481Z,1510165515.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:15.864Z,1510165515.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:15.880Z,1510165515.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:16.243Z,1510165516.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:16.278Z,1510165516.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:16.643Z,1510165516.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:16.680Z,1510165516.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:17.044Z,1510165517.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:17.076Z,1510165517.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:17.445Z,1510165517.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:17.485Z,1510165517.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:17.858Z,1510165517.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:17.912Z,1510165517.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:18.260Z,1510165518.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:18.324Z,1510165518.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:18.663Z,1510165518.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:18.714Z,1510165518.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:19.041Z,1510165519.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:19.087Z,1510165519.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:19.444Z,1510165519.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:19.482Z,1510165519.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:19.843Z,1510165519.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:19.891Z,1510165519.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:20.240Z,1510165520.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:20.278Z,1510165520.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:20.647Z,1510165520.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:20.664Z,1510165520.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:21.058Z,1510165521.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:21.090Z,1510165521.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:21.460Z,1510165521.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:21.490Z,1510165521.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:21.858Z,1510165521.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:21.890Z,1510165521.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:22.247Z,1510165522.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:22.268Z,1510165522.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:22.642Z,1510165522.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:22.658Z,1510165522.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:23.047Z,1510165523.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:23.063Z,1510165523.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:23.447Z,1510165523.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:23.463Z,1510165523.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:23.854Z,1510165523.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:23.871Z,1510165523.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:24.334Z,1510165524.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:24.350Z,1510165524.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:24.658Z,1510165524.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:24.682Z,1510165524.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:25.046Z,1510165525.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:25.065Z,1510165525.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:25.464Z,1510165525.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:25.510Z,1510165525.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:25.853Z,1510165525.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:25.870Z,1510165525.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:26.252Z,1510165526.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:26.279Z,1510165526.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:26.653Z,1510165526.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:26.676Z,1510165526.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:27.058Z,1510165527.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:27.075Z,1510165527.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:27.459Z,1510165527.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:27.480Z,1510165527.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:27.862Z,1510165527.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:27.884Z,1510165527.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:28.242Z,1510165528.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:28.299Z,1510165528.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:28.646Z,1510165528.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:28.662Z,1510165528.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:29.065Z,1510165529.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:29.081Z,1510165529.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:29.443Z,1510165529.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:29.480Z,1510165529.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:29.867Z,1510165529.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:29.885Z,1510165529.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:30.262Z,1510165530.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:30.287Z,1510165530.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:30.661Z,1510165530.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:30.677Z,1510165530.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:31.039Z,1510165531.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:31.082Z,1510165531.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:31.443Z,1510165531.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:31.478Z,1510165531.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:31.844Z,1510165531.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:31.876Z,1510165531.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:32.244Z,1510165532.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:32.280Z,1510165532.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:32.643Z,1510165532.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:32.687Z,1510165532.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:33.054Z,1510165533.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:33.086Z,1510165533.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:33.466Z,1510165533.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:33.482Z,1510165533.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:33.854Z,1510165533.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:33.886Z,1510165533.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:34.247Z,1510165534.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:34.278Z,1510165534.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:34.640Z,1510165534.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:34.679Z,1510165534.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:35.045Z,1510165535.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:35.077Z,1510165535.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:35.444Z,1510165535.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:35.460Z,1510165535.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:35.857Z,1510165535.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:35.886Z,1510165535.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:36.258Z,1510165536.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:36.288Z,1510165536.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:36.654Z,1510165536.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:36.686Z,1510165536.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:37.043Z,1510165537.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:37.060Z,1510165537.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:37.447Z,1510165537.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:37.464Z,1510165537.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:37.847Z,1510165537.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:37.864Z,1510165537.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:38.248Z,1510165538.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:38.265Z,1510165538.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:38.646Z,1510165538.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:38.663Z,1510165538.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:39.058Z,1510165539.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:39.089Z,1510165539.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:39.457Z,1510165539.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:39.490Z,1510165539.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:39.858Z,1510165539.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:39.890Z,1510165539.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:40.246Z,1510165540.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:40.311Z,1510165540.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:40.646Z,1510165540.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:40.715Z,1510165540.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:41.045Z,1510165541.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:41.061Z,1510165541.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:41.446Z,1510165541.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:41.497Z,1510165541.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:41.857Z,1510165541.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:41.895Z,1510165541.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:42.253Z,1510165542.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:42.300Z,1510165542.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:42.658Z,1510165542.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:42.690Z,1510165542.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:43.046Z,1510165543.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:43.061Z,1510165543.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:43.444Z,1510165543.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:43.460Z,1510165543.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:43.842Z,1510165543.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:43.867Z,1510165543.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:44.246Z,1510165544.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:44.267Z,1510165544.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:44.642Z,1510165544.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:44.670Z,1510165544.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:45.050Z,1510165545.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:45.071Z,1510165545.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:45.453Z,1510165545.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:45.475Z,1510165545.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:45.850Z,1510165545.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:45.872Z,1510165545.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:46.248Z,1510165546.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:46.265Z,1510165546.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:46.649Z,1510165546.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:46.664Z,1510165546.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:47.045Z,1510165547.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:47.064Z,1510165547.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:47.448Z,1510165547.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:47.465Z,1510165547.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:47.857Z,1510165547.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:47.873Z,1510165547.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:48.254Z,1510165548.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:48.270Z,1510165548.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:48.658Z,1510165548.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:48.674Z,1510165548.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:49.050Z,1510165549.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:49.066Z,1510165549.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:49.443Z,1510165549.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:49.471Z,1510165549.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:49.849Z,1510165549.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:49.865Z,1510165549.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:50.246Z,1510165550.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:50.263Z,1510165550.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:50.642Z,1510165550.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:50.695Z,1510165550.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:51.054Z,1510165551.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:51.071Z,1510165551.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:51.458Z,1510165551.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:51.479Z,1510165551.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:51.854Z,1510165551.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:51.871Z,1510165551.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:52.247Z,1510165552.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:52.268Z,1510165552.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:52.649Z,1510165552.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:52.665Z,1510165552.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:53.049Z,1510165553.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:53.065Z,1510165553.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:53.448Z,1510165553.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:53.464Z,1510165553.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:53.852Z,1510165553.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:53.868Z,1510165553.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:54.254Z,1510165554.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:54.270Z,1510165554.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:54.654Z,1510165554.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:54.670Z,1510165554.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:55.049Z,1510165555.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:55.065Z,1510165555.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:55.445Z,1510165555.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:55.461Z,1510165555.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:55.848Z,1510165555.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:55.864Z,1510165555.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:56.250Z,1510165556.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:56.266Z,1510165556.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:56.642Z,1510165556.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:56.671Z,1510165556.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:57.054Z,1510165557.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:57.070Z,1510165557.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:57.457Z,1510165557.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:57.473Z,1510165557.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:57.854Z,1510165557.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:57.870Z,1510165557.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:58.249Z,1510165558.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:58.266Z,1510165558.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:58.646Z,1510165558.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:58.664Z,1510165558.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:59.050Z,1510165559.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:59.066Z,1510165559.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:59.449Z,1510165559.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:59.465Z,1510165559.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:25:59.857Z,1510165559.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:25:59.873Z,1510165559.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:00.258Z,1510165560.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:00.274Z,1510165560.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:00.654Z,1510165560.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:00.671Z,1510165560.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:01.046Z,1510165561.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:01.062Z,1510165561.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:01.442Z,1510165561.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:01.476Z,1510165561.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:01.848Z,1510165561.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:01.872Z,1510165561.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:02.250Z,1510165562.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:02.266Z,1510165562.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:02.648Z,1510165562.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:02.715Z,1510165562.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:03.058Z,1510165563.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:03.138Z,1510165563.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:03.458Z,1510165563.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:03.475Z,1510165563.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:03.859Z,1510165563.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:03.876Z,1510165563.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:04.242Z,1510165564.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:04.298Z,1510165564.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:04.650Z,1510165564.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:04.665Z,1510165564.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:05.050Z,1510165565.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:05.105Z,1510165565.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:05.447Z,1510165565.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:05.468Z,1510165565.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:05.859Z,1510165565.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:05.879Z,1510165565.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:06.258Z,1510165566.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:06.274Z,1510165566.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:06.658Z,1510165566.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:06.674Z,1510165566.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:07.050Z,1510165567.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:07.065Z,1510165567.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:07.445Z,1510165567.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:07.461Z,1510165567.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:07.849Z,1510165567.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:07.865Z,1510165567.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:08.247Z,1510165568.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:08.262Z,1510165568.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:08.646Z,1510165568.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:08.662Z,1510165568.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:08.666Z,1510165568.666 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T18:21:08.7Z
2017-11-08T18:26:08.666Z,1510165568.666 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T18:26:08.666Z,1510165568.666 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T18:26:09.063Z,1510165569.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:09.079Z,1510165569.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:12.411Z,1510165572.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:12.427Z,1510165572.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:12.509Z,1510165572.509 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171108T132236/Courier0068.lzma
2017-11-08T18:26:12.548Z,1510165572.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:12.583Z,1510165572.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:12.936Z,1510165572.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:12.968Z,1510165572.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:13.309Z,1510165573.309 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0068.lzma.bak
2017-11-08T18:26:13.309Z,1510165573.309 [DataOverHttps](INFO): SBD MOMSN=5223211
2017-11-08T18:26:13.341Z,1510165573.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:13.406Z,1510165573.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:14.275Z,1510165574.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:14.296Z,1510165574.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:14.461Z,1510165574.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:14.477Z,1510165574.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:17.530Z,1510165577.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:17.547Z,1510165577.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:17.705Z,1510165577.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:17.722Z,1510165577.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:18.087Z,1510165578.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:18.118Z,1510165578.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:18.487Z,1510165578.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:18.518Z,1510165578.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:18.887Z,1510165578.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:18.917Z,1510165578.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:19.288Z,1510165579.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:19.318Z,1510165579.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:22.382Z,1510165582.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:22.421Z,1510165582.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:22.518Z,1510165582.518 [DataOverHttps](INFO): Sending 219 bytes from file Logs/20171108T132236/Express0069.lzma
2017-11-08T18:26:22.571Z,1510165582.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:22.609Z,1510165582.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:22.963Z,1510165582.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:22.981Z,1510165582.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:23.317Z,1510165583.317 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0069.lzma.bak
2017-11-08T18:26:23.318Z,1510165583.318 [DataOverHttps](INFO): SBD MOMSN=5223213
2017-11-08T18:26:23.363Z,1510165583.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:23.393Z,1510165583.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:24.283Z,1510165584.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:24.304Z,1510165584.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:24.307Z,1510165584.307 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T18:26:24.307Z,1510165584.307 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T18:26:24.307Z,1510165584.307 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T18:26:24.439Z,1510165584.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:24.456Z,1510165584.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:24.854Z,1510165584.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:24.876Z,1510165584.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:28.391Z,1510165588.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:28.480Z,1510165588.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:28.653Z,1510165588.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:28.689Z,1510165588.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:29.022Z,1510165589.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:29.076Z,1510165589.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:29.421Z,1510165589.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:29.466Z,1510165589.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:29.821Z,1510165589.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:29.876Z,1510165589.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:30.220Z,1510165590.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:30.236Z,1510165590.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:30.632Z,1510165590.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:30.662Z,1510165590.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:31.030Z,1510165591.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:31.062Z,1510165591.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:31.433Z,1510165591.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:31.449Z,1510165591.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:31.829Z,1510165591.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:31.851Z,1510165591.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:32.227Z,1510165592.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:32.248Z,1510165592.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:32.626Z,1510165592.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:32.642Z,1510165592.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:33.028Z,1510165593.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:33.045Z,1510165593.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:33.427Z,1510165593.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:33.447Z,1510165593.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:33.833Z,1510165593.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:33.849Z,1510165593.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:34.230Z,1510165594.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:34.273Z,1510165594.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:34.630Z,1510165594.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:34.646Z,1510165594.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:35.023Z,1510165595.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:35.038Z,1510165595.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:35.425Z,1510165595.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:35.441Z,1510165595.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:35.825Z,1510165595.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:35.841Z,1510165595.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:36.227Z,1510165596.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:36.242Z,1510165596.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:36.618Z,1510165596.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:36.647Z,1510165596.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:37.030Z,1510165597.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:37.047Z,1510165597.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:37.429Z,1510165597.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:37.446Z,1510165597.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:37.826Z,1510165597.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:37.848Z,1510165597.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:38.224Z,1510165598.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:38.278Z,1510165598.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:38.624Z,1510165598.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:38.639Z,1510165598.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:39.016Z,1510165599.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:39.132Z,1510165599.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:39.416Z,1510165599.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:39.516Z,1510165599.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:39.840Z,1510165599.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:39.895Z,1510165599.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:40.240Z,1510165600.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:40.256Z,1510165600.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:40.636Z,1510165600.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:40.652Z,1510165600.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:41.019Z,1510165601.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:41.049Z,1510165601.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:41.428Z,1510165601.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:41.468Z,1510165601.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:41.840Z,1510165601.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:41.865Z,1510165601.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:42.216Z,1510165602.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:42.233Z,1510165602.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:42.615Z,1510165602.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:42.635Z,1510165602.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:43.033Z,1510165603.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:43.059Z,1510165603.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:43.449Z,1510165603.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:43.465Z,1510165603.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:43.826Z,1510165603.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:43.854Z,1510165603.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:44.219Z,1510165604.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:44.240Z,1510165604.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:44.623Z,1510165604.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:44.639Z,1510165604.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:45.025Z,1510165605.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:45.041Z,1510165605.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:45.421Z,1510165605.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:45.437Z,1510165605.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:45.833Z,1510165605.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:45.865Z,1510165605.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:46.239Z,1510165606.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:46.263Z,1510165606.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:46.634Z,1510165606.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:46.664Z,1510165606.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:47.019Z,1510165607.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:47.059Z,1510165607.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:47.426Z,1510165607.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:47.443Z,1510165607.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:47.823Z,1510165607.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:47.872Z,1510165607.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:48.221Z,1510165608.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:48.250Z,1510165608.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:48.619Z,1510165608.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:48.646Z,1510165608.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:49.042Z,1510165609.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:49.064Z,1510165609.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:49.436Z,1510165609.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:49.452Z,1510165609.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:49.841Z,1510165609.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:49.857Z,1510165609.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:50.219Z,1510165610.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:50.296Z,1510165610.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:50.616Z,1510165610.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:50.652Z,1510165610.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:51.017Z,1510165611.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:51.084Z,1510165611.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:51.415Z,1510165611.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:51.450Z,1510165611.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:51.841Z,1510165611.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:51.888Z,1510165611.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:52.233Z,1510165612.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:52.266Z,1510165612.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:52.636Z,1510165612.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:52.652Z,1510165612.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:53.021Z,1510165613.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:53.060Z,1510165613.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:53.420Z,1510165613.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:53.446Z,1510165613.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:53.819Z,1510165613.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:53.844Z,1510165613.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:54.216Z,1510165614.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:54.247Z,1510165614.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:54.615Z,1510165614.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:54.649Z,1510165614.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:55.036Z,1510165615.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:55.052Z,1510165615.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:55.440Z,1510165615.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:55.456Z,1510165615.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:55.836Z,1510165615.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:55.852Z,1510165615.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:56.219Z,1510165616.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:56.249Z,1510165616.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:56.619Z,1510165616.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:56.650Z,1510165616.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:57.021Z,1510165617.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:57.051Z,1510165617.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:57.419Z,1510165617.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:57.455Z,1510165617.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:57.846Z,1510165617.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:57.864Z,1510165617.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:58.238Z,1510165618.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:58.271Z,1510165618.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:58.634Z,1510165618.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:58.681Z,1510165618.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:59.022Z,1510165619.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:59.038Z,1510165619.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:59.422Z,1510165619.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:59.439Z,1510165619.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:26:59.823Z,1510165619.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:26:59.844Z,1510165619.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:00.223Z,1510165620.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:00.270Z,1510165620.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:00.623Z,1510165620.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:00.643Z,1510165620.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:01.034Z,1510165621.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:01.066Z,1510165621.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:01.429Z,1510165621.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:01.445Z,1510165621.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:01.834Z,1510165621.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:01.866Z,1510165621.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:02.262Z,1510165622.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:02.287Z,1510165622.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:02.622Z,1510165622.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:02.638Z,1510165622.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:03.024Z,1510165623.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:03.040Z,1510165623.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:03.422Z,1510165623.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:03.444Z,1510165623.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:03.841Z,1510165623.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:03.872Z,1510165623.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:04.233Z,1510165624.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:04.251Z,1510165624.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:04.635Z,1510165624.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:04.654Z,1510165624.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:05.031Z,1510165625.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:05.048Z,1510165625.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:05.428Z,1510165625.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:05.445Z,1510165625.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:05.826Z,1510165625.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:05.842Z,1510165625.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:06.230Z,1510165626.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:06.246Z,1510165626.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:06.628Z,1510165626.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:06.646Z,1510165626.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:07.039Z,1510165627.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:07.059Z,1510165627.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:07.444Z,1510165627.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:07.462Z,1510165627.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:07.844Z,1510165627.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:07.864Z,1510165627.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:08.234Z,1510165628.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:08.256Z,1510165628.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:08.623Z,1510165628.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:08.655Z,1510165628.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:09.022Z,1510165629.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:09.048Z,1510165629.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:09.420Z,1510165629.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:09.446Z,1510165629.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:09.845Z,1510165629.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:09.862Z,1510165629.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:10.240Z,1510165630.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:10.259Z,1510165630.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:10.644Z,1510165630.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:10.670Z,1510165630.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:11.026Z,1510165631.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:11.059Z,1510165631.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:11.416Z,1510165631.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:11.448Z,1510165631.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:11.821Z,1510165631.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:11.859Z,1510165631.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:12.220Z,1510165632.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:12.284Z,1510165632.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:12.619Z,1510165632.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:12.679Z,1510165632.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:13.038Z,1510165633.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:13.069Z,1510165633.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:13.438Z,1510165633.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:13.469Z,1510165633.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:13.834Z,1510165633.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:13.888Z,1510165633.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:14.223Z,1510165634.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:14.244Z,1510165634.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:14.623Z,1510165634.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:14.679Z,1510165634.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:15.020Z,1510165635.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:15.040Z,1510165635.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:15.422Z,1510165635.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:15.438Z,1510165635.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:15.834Z,1510165635.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:15.866Z,1510165635.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:16.234Z,1510165636.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:16.250Z,1510165636.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:16.634Z,1510165636.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:16.650Z,1510165636.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:17.023Z,1510165637.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:17.040Z,1510165637.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:17.425Z,1510165637.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:17.441Z,1510165637.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:17.824Z,1510165637.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:17.841Z,1510165637.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:18.226Z,1510165638.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:18.242Z,1510165638.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:18.618Z,1510165638.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:18.647Z,1510165638.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:19.026Z,1510165639.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:19.048Z,1510165639.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:19.434Z,1510165639.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:19.450Z,1510165639.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:19.830Z,1510165639.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:19.846Z,1510165639.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:20.224Z,1510165640.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:20.241Z,1510165640.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:20.626Z,1510165640.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:20.642Z,1510165640.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:21.026Z,1510165641.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:21.042Z,1510165641.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:21.427Z,1510165641.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:21.448Z,1510165641.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:21.834Z,1510165641.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:21.850Z,1510165641.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:22.234Z,1510165642.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:22.250Z,1510165642.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:22.656Z,1510165642.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:22.704Z,1510165642.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:23.030Z,1510165643.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:23.046Z,1510165643.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:23.422Z,1510165643.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:23.438Z,1510165643.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:23.836Z,1510165643.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:23.873Z,1510165643.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:24.225Z,1510165644.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:24.251Z,1510165644.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:24.626Z,1510165644.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:24.642Z,1510165644.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:24.717Z,1510165644.717 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:27:24.717Z,1510165644.717 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T18:27:25.034Z,1510165645.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:25.041Z,1510165645.041 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:27:25.041Z,1510165645.041 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:27:25.041Z,1510165645.041 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:27:25.041Z,1510165645.041 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T18:27:25.041Z,1510165645.041 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:27:25.052Z,1510165645.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:25.165Z,1510165645.165 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:27:25.445Z,1510165645.445 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:27:25.608Z,1510165645.608 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:27:28.524Z,1510165648.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:28.542Z,1510165648.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:28.617Z,1510165648.617 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:27:28.618Z,1510165648.618 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T18:27:28.658Z,1510165648.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:28.708Z,1510165648.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:28.845Z,1510165648.845 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:27:28.845Z,1510165648.845 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:27:28.845Z,1510165648.845 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:27:28.845Z,1510165648.845 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T18:27:28.846Z,1510165648.846 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:27:29.051Z,1510165649.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:29.083Z,1510165649.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:29.166Z,1510165649.166 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:27:29.249Z,1510165649.249 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:27:29.340Z,1510165649.340 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:27:29.452Z,1510165649.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:29.491Z,1510165649.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:29.856Z,1510165649.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:29.883Z,1510165649.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:30.256Z,1510165650.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:30.282Z,1510165650.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:30.655Z,1510165650.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:30.681Z,1510165650.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:30.769Z,1510165650.769 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:27:30.769Z,1510165650.769 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T18:27:30.957Z,1510165650.957 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:27:30.957Z,1510165650.957 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:27:30.957Z,1510165650.957 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:27:30.957Z,1510165650.957 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T18:27:30.958Z,1510165650.958 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:27:31.066Z,1510165651.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:31.089Z,1510165651.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:31.169Z,1510165651.169 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:27:31.361Z,1510165651.361 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:27:31.475Z,1510165651.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:31.505Z,1510165651.505 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:27:31.508Z,1510165651.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:31.873Z,1510165651.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:31.889Z,1510165651.889 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:31.889Z,1510165651.889 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 101
2017-11-08T18:27:31.889Z,1510165651.889 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T18:27:31.891Z,1510165651.891 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:31.891Z,1510165651.891 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 101
2017-11-08T18:27:31.891Z,1510165651.891 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T18:27:31.894Z,1510165651.894 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:31.894Z,1510165651.894 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 101
2017-11-08T18:27:31.894Z,1510165651.894 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T18:27:31.965Z,1510165651.965 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T18:27:31.965Z,1510165651.965 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T18:27:31.965Z,1510165651.965 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T18:27:32.252Z,1510165652.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:32.361Z,1510165652.361 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T18:27:32.361Z,1510165652.361 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 101
2017-11-08T18:27:32.361Z,1510165652.361 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T18:27:32.361Z,1510165652.361 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 101
2017-11-08T18:27:32.362Z,1510165652.362 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T18:27:32.362Z,1510165652.362 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 101
2017-11-08T18:27:32.652Z,1510165652.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:32.668Z,1510165652.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T18:27:32.681Z,1510165652.681 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:27:32.681Z,1510165652.681 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:27:32.685Z,1510165652.685 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T18:27:32.685Z,1510165652.685 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:27:32.686Z,1510165652.686 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:27:32.686Z,1510165652.686 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T18:27:32.686Z,1510165652.686 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:27:32.687Z,1510165652.687 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:27:32.769Z,1510165652.769 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:27:32.769Z,1510165652.769 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T18:27:33.057Z,1510165653.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:33.093Z,1510165653.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T18:27:33.094Z,1510165653.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:33.121Z,1510165653.121 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:27:33.122Z,1510165653.122 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:27:33.122Z,1510165653.122 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:27:33.122Z,1510165653.122 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T18:27:33.122Z,1510165653.122 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:27:33.173Z,1510165653.173 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:27:33.453Z,1510165653.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:33.471Z,1510165653.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T18:27:33.472Z,1510165653.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:33.525Z,1510165653.525 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:27:33.687Z,1510165653.687 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:27:33.877Z,1510165653.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:33.904Z,1510165653.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T18:27:33.905Z,1510165653.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:34.270Z,1510165654.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:34.293Z,1510165654.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T18:27:34.294Z,1510165654.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:34.674Z,1510165654.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:34.743Z,1510165654.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2017-11-08T18:27:34.749Z,1510165654.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:35.055Z,1510165655.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:35.138Z,1510165655.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T18:27:35.139Z,1510165655.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:35.226Z,1510165655.226 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:27:35.226Z,1510165655.226 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T18:27:35.309Z,1510165655.309 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:27:35.309Z,1510165655.309 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:27:35.309Z,1510165655.309 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:27:35.310Z,1510165655.310 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T18:27:35.310Z,1510165655.310 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:27:35.451Z,1510165655.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:35.491Z,1510165655.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T18:27:35.492Z,1510165655.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:35.586Z,1510165655.586 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:27:35.587Z,1510165655.587 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:27:35.713Z,1510165655.713 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:27:35.883Z,1510165655.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:35.913Z,1510165655.913 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:27:35.949Z,1510165655.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-08T18:27:35.950Z,1510165655.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:36.253Z,1510165656.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:36.286Z,1510165656.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T18:27:36.287Z,1510165656.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:36.652Z,1510165656.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:36.695Z,1510165656.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T18:27:36.696Z,1510165656.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:37.066Z,1510165657.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:37.091Z,1510165657.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T18:27:37.092Z,1510165657.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:37.466Z,1510165657.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:37.495Z,1510165657.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T18:27:37.496Z,1510165657.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:37.865Z,1510165657.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:37.893Z,1510165657.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T18:27:37.894Z,1510165657.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:38.257Z,1510165658.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:38.273Z,1510165658.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T18:27:38.274Z,1510165658.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:38.650Z,1510165658.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:38.678Z,1510165658.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T18:27:38.679Z,1510165658.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:39.058Z,1510165659.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:39.074Z,1510165659.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T18:27:39.074Z,1510165659.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:39.457Z,1510165659.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:39.473Z,1510165659.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T18:27:39.474Z,1510165659.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:39.870Z,1510165659.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:39.912Z,1510165659.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T18:27:39.922Z,1510165659.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:40.261Z,1510165660.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:40.294Z,1510165660.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T18:27:40.294Z,1510165660.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:40.666Z,1510165660.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:40.695Z,1510165660.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T18:27:40.697Z,1510165660.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:41.051Z,1510165661.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:41.066Z,1510165661.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T18:27:41.067Z,1510165661.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:41.454Z,1510165661.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:41.471Z,1510165661.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T18:27:41.472Z,1510165661.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:41.856Z,1510165661.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:41.910Z,1510165661.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T18:27:41.911Z,1510165661.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:42.255Z,1510165662.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:42.275Z,1510165662.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T18:27:42.276Z,1510165662.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:42.654Z,1510165662.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:42.671Z,1510165662.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T18:27:42.672Z,1510165662.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:43.071Z,1510165663.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:43.100Z,1510165663.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T18:27:43.101Z,1510165663.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:43.470Z,1510165663.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:43.499Z,1510165663.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T18:27:43.500Z,1510165663.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:43.866Z,1510165663.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:43.881Z,1510165663.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T18:27:43.882Z,1510165663.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:44.259Z,1510165664.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:44.279Z,1510165664.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T18:27:44.280Z,1510165664.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:44.654Z,1510165664.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:44.675Z,1510165664.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T18:27:44.676Z,1510165664.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:45.059Z,1510165665.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:45.101Z,1510165665.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T18:27:45.102Z,1510165665.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:45.456Z,1510165665.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:45.477Z,1510165665.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T18:27:45.478Z,1510165665.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:45.859Z,1510165665.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:45.879Z,1510165665.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T18:27:45.880Z,1510165665.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:46.266Z,1510165666.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:46.283Z,1510165666.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T18:27:46.308Z,1510165666.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:46.667Z,1510165666.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:46.683Z,1510165666.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T18:27:46.684Z,1510165666.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:47.055Z,1510165667.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:47.079Z,1510165667.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T18:27:47.080Z,1510165667.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:47.454Z,1510165667.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:47.470Z,1510165667.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T18:27:47.471Z,1510165667.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:47.853Z,1510165667.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:47.870Z,1510165667.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T18:27:47.871Z,1510165667.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:48.254Z,1510165668.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:48.276Z,1510165668.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T18:27:48.277Z,1510165668.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:48.659Z,1510165668.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:48.675Z,1510165668.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T18:27:48.676Z,1510165668.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:49.062Z,1510165669.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:49.079Z,1510165669.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T18:27:49.080Z,1510165669.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:49.465Z,1510165669.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:49.481Z,1510165669.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T18:27:49.482Z,1510165669.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:49.866Z,1510165669.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:49.881Z,1510165669.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T18:27:49.882Z,1510165669.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:50.268Z,1510165670.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:50.283Z,1510165670.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T18:27:50.284Z,1510165670.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:50.656Z,1510165670.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:50.671Z,1510165670.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T18:27:50.672Z,1510165670.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:51.059Z,1510165671.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:51.074Z,1510165671.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T18:27:51.075Z,1510165671.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:51.456Z,1510165671.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:51.472Z,1510165671.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T18:27:51.473Z,1510165671.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:51.869Z,1510165671.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:51.906Z,1510165671.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:52.273Z,1510165672.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:52.304Z,1510165672.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:52.662Z,1510165672.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:52.679Z,1510165672.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:53.056Z,1510165673.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:53.072Z,1510165673.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:53.458Z,1510165673.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:53.475Z,1510165673.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:53.851Z,1510165673.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:53.879Z,1510165673.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:54.257Z,1510165674.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:54.277Z,1510165674.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:54.658Z,1510165674.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:54.675Z,1510165674.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:55.066Z,1510165675.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:55.083Z,1510165675.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:55.466Z,1510165675.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:55.482Z,1510165675.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:55.866Z,1510165675.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:55.883Z,1510165675.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:56.256Z,1510165676.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:56.264Z,1510165676.264 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T18:27:56.265Z,1510165676.265 [BPC1] Data Fault, FailCount= 1
2017-11-08T18:27:56.265Z,1510165676.265 [BPC1](ERROR): Data Fault
2017-11-08T18:27:56.276Z,1510165676.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:56.377Z,1510165676.377 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T18:27:56.656Z,1510165676.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:56.673Z,1510165676.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:57.058Z,1510165677.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:57.075Z,1510165677.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:57.451Z,1510165677.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:57.475Z,1510165677.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:57.553Z,1510165677.553 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T18:27:57.553Z,1510165677.553 [BPC1] No Fault, FailCount= 1
2017-11-08T18:27:57.857Z,1510165677.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:57.921Z,1510165677.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:58.266Z,1510165678.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:58.282Z,1510165678.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:58.662Z,1510165678.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:58.678Z,1510165678.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:59.055Z,1510165679.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:59.071Z,1510165679.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:59.457Z,1510165679.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:59.473Z,1510165679.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:27:59.853Z,1510165679.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:27:59.869Z,1510165679.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:00.257Z,1510165680.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:00.272Z,1510165680.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:00.658Z,1510165680.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:00.675Z,1510165680.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:01.062Z,1510165681.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:01.078Z,1510165681.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:01.465Z,1510165681.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:01.483Z,1510165681.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:01.866Z,1510165681.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:01.882Z,1510165681.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:02.256Z,1510165682.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:02.272Z,1510165682.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:02.654Z,1510165682.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:02.675Z,1510165682.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:03.059Z,1510165683.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:03.075Z,1510165683.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:03.453Z,1510165683.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:03.469Z,1510165683.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:03.862Z,1510165683.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:03.878Z,1510165683.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:04.266Z,1510165684.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:04.282Z,1510165684.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:04.662Z,1510165684.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:04.678Z,1510165684.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:05.055Z,1510165685.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:05.071Z,1510165685.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:05.458Z,1510165685.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:05.474Z,1510165685.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:05.850Z,1510165685.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:05.879Z,1510165685.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:06.258Z,1510165686.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:06.306Z,1510165686.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:06.658Z,1510165686.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:06.679Z,1510165686.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:07.062Z,1510165687.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:07.078Z,1510165687.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:07.461Z,1510165687.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:07.483Z,1510165687.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:07.866Z,1510165687.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:07.882Z,1510165687.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:08.257Z,1510165688.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:08.273Z,1510165688.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:08.654Z,1510165688.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:08.675Z,1510165688.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:09.059Z,1510165689.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:09.079Z,1510165689.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:09.458Z,1510165689.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:09.475Z,1510165689.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:09.864Z,1510165689.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:09.881Z,1510165689.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:10.262Z,1510165690.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:10.279Z,1510165690.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:10.672Z,1510165690.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:10.696Z,1510165690.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:11.052Z,1510165691.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:11.084Z,1510165691.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:11.451Z,1510165691.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:11.468Z,1510165691.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:11.851Z,1510165691.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:11.868Z,1510165691.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:12.247Z,1510165692.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:12.264Z,1510165692.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:12.647Z,1510165692.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:12.663Z,1510165692.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:13.066Z,1510165693.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:13.096Z,1510165693.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:13.465Z,1510165693.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:13.494Z,1510165693.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:13.865Z,1510165693.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:13.900Z,1510165693.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:14.251Z,1510165694.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:14.268Z,1510165694.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:14.655Z,1510165694.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:14.672Z,1510165694.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:15.056Z,1510165695.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:15.073Z,1510165695.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:15.455Z,1510165695.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:15.476Z,1510165695.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:15.866Z,1510165695.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:15.900Z,1510165695.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:16.265Z,1510165696.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:16.304Z,1510165696.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:16.666Z,1510165696.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:16.698Z,1510165696.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:17.054Z,1510165697.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:17.070Z,1510165697.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:17.457Z,1510165697.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:17.473Z,1510165697.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:17.856Z,1510165697.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:17.880Z,1510165697.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:18.256Z,1510165698.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:18.352Z,1510165698.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:18.654Z,1510165698.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:18.670Z,1510165698.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:19.067Z,1510165699.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:19.118Z,1510165699.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:19.466Z,1510165699.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:19.487Z,1510165699.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:19.867Z,1510165699.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:19.909Z,1510165699.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:20.257Z,1510165700.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:20.273Z,1510165700.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:20.657Z,1510165700.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:20.673Z,1510165700.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:21.054Z,1510165701.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:21.075Z,1510165701.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:21.457Z,1510165701.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:21.474Z,1510165701.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:21.867Z,1510165701.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:21.887Z,1510165701.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:22.267Z,1510165702.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:22.282Z,1510165702.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:22.667Z,1510165702.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:22.683Z,1510165702.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:23.055Z,1510165703.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:23.077Z,1510165703.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:23.455Z,1510165703.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:23.471Z,1510165703.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:23.856Z,1510165703.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:23.877Z,1510165703.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:24.258Z,1510165704.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:24.274Z,1510165704.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:24.659Z,1510165704.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:24.674Z,1510165704.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:25.067Z,1510165705.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:25.084Z,1510165705.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:28.154Z,1510165708.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:28.209Z,1510165708.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:28.338Z,1510165708.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:28.376Z,1510165708.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:28.731Z,1510165708.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:28.767Z,1510165708.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:29.129Z,1510165709.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:29.145Z,1510165709.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:29.532Z,1510165709.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:29.565Z,1510165709.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:29.942Z,1510165709.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:29.974Z,1510165709.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:30.345Z,1510165710.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:30.373Z,1510165710.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:30.739Z,1510165710.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:30.771Z,1510165710.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:31.131Z,1510165711.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:31.147Z,1510165711.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:31.526Z,1510165711.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:31.542Z,1510165711.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:31.926Z,1510165711.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:31.943Z,1510165711.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:32.331Z,1510165712.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:32.348Z,1510165712.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:32.730Z,1510165712.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:32.746Z,1510165712.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:33.138Z,1510165713.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:33.155Z,1510165713.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:33.541Z,1510165713.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:33.558Z,1510165713.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:33.937Z,1510165713.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:33.960Z,1510165713.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:34.329Z,1510165714.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:34.345Z,1510165714.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:34.732Z,1510165714.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:34.748Z,1510165714.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:35.134Z,1510165715.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:35.150Z,1510165715.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:35.527Z,1510165715.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:35.548Z,1510165715.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:35.938Z,1510165715.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:35.954Z,1510165715.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:36.337Z,1510165716.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:36.359Z,1510165716.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:36.738Z,1510165716.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:36.754Z,1510165716.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:37.132Z,1510165717.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:37.149Z,1510165717.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:37.534Z,1510165717.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:37.550Z,1510165717.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:37.927Z,1510165717.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:37.948Z,1510165717.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:38.331Z,1510165718.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:38.351Z,1510165718.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:38.734Z,1510165718.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:38.750Z,1510165718.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:39.138Z,1510165719.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:39.155Z,1510165719.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:39.546Z,1510165719.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:39.562Z,1510165719.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:39.941Z,1510165719.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:39.957Z,1510165719.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:40.330Z,1510165720.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:40.406Z,1510165720.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:40.731Z,1510165720.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:40.753Z,1510165720.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:41.135Z,1510165721.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:41.198Z,1510165721.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:41.534Z,1510165721.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:41.555Z,1510165721.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:41.943Z,1510165721.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:42.006Z,1510165722.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:42.347Z,1510165722.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:42.363Z,1510165722.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:42.737Z,1510165722.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:42.761Z,1510165722.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:43.131Z,1510165723.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:43.153Z,1510165723.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:43.534Z,1510165723.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:43.550Z,1510165723.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:43.923Z,1510165723.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:43.954Z,1510165723.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:44.331Z,1510165724.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:44.364Z,1510165724.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:44.734Z,1510165724.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:44.749Z,1510165724.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:45.137Z,1510165725.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:45.165Z,1510165725.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:45.547Z,1510165725.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:45.563Z,1510165725.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:45.944Z,1510165725.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:45.959Z,1510165725.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:46.327Z,1510165726.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:46.352Z,1510165726.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:46.727Z,1510165726.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:46.759Z,1510165726.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:47.128Z,1510165727.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:47.153Z,1510165727.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:47.523Z,1510165727.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:47.552Z,1510165727.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:47.943Z,1510165727.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:47.960Z,1510165727.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:48.344Z,1510165728.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:48.359Z,1510165728.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:48.737Z,1510165728.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:48.763Z,1510165728.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:49.127Z,1510165729.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:49.157Z,1510165729.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:49.523Z,1510165729.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:49.549Z,1510165729.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:49.923Z,1510165729.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:49.954Z,1510165729.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:50.324Z,1510165730.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:50.379Z,1510165730.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:50.727Z,1510165730.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:50.752Z,1510165730.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:51.144Z,1510165731.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:51.160Z,1510165731.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:51.547Z,1510165731.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:51.563Z,1510165731.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:51.948Z,1510165731.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:51.964Z,1510165731.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:52.327Z,1510165732.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:52.360Z,1510165732.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:52.727Z,1510165732.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:52.758Z,1510165732.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:53.124Z,1510165733.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:53.149Z,1510165733.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:53.523Z,1510165733.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:53.552Z,1510165733.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:53.944Z,1510165733.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:53.960Z,1510165733.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:54.348Z,1510165734.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:54.364Z,1510165734.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:54.734Z,1510165734.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:54.767Z,1510165734.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:55.127Z,1510165735.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:55.158Z,1510165735.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:55.527Z,1510165735.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:55.558Z,1510165735.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:55.923Z,1510165735.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:55.956Z,1510165735.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:56.329Z,1510165736.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:56.361Z,1510165736.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:56.724Z,1510165736.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:56.740Z,1510165736.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:57.138Z,1510165737.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:57.164Z,1510165737.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:57.542Z,1510165737.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:57.572Z,1510165737.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:57.938Z,1510165737.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:57.971Z,1510165737.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:58.327Z,1510165738.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:58.367Z,1510165738.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:58.727Z,1510165738.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:58.744Z,1510165738.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:59.124Z,1510165739.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:59.141Z,1510165739.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:59.527Z,1510165739.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:59.565Z,1510165739.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:28:59.942Z,1510165739.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:28:59.974Z,1510165739.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:00.345Z,1510165740.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:00.382Z,1510165740.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:00.742Z,1510165740.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:00.776Z,1510165740.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:01.131Z,1510165741.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:01.147Z,1510165741.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:01.530Z,1510165741.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:01.546Z,1510165741.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:01.931Z,1510165741.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:01.947Z,1510165741.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:02.331Z,1510165742.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:02.425Z,1510165742.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:02.730Z,1510165742.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:02.746Z,1510165742.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:03.138Z,1510165743.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:03.160Z,1510165743.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:03.541Z,1510165743.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:03.593Z,1510165743.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:03.941Z,1510165743.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:03.963Z,1510165743.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:04.330Z,1510165744.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:04.385Z,1510165744.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:04.732Z,1510165744.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:04.749Z,1510165744.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:05.135Z,1510165745.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:05.150Z,1510165745.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:05.526Z,1510165745.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:05.557Z,1510165745.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:05.942Z,1510165745.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:05.958Z,1510165745.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:06.343Z,1510165746.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:06.359Z,1510165746.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:06.740Z,1510165746.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:06.756Z,1510165746.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:07.138Z,1510165747.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:07.154Z,1510165747.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:07.531Z,1510165747.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:07.547Z,1510165747.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:07.926Z,1510165747.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:07.958Z,1510165747.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:08.335Z,1510165748.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:08.356Z,1510165748.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:08.735Z,1510165748.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:08.750Z,1510165748.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:09.139Z,1510165749.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:09.159Z,1510165749.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:09.542Z,1510165749.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:09.564Z,1510165749.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:09.943Z,1510165749.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:09.959Z,1510165749.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:10.329Z,1510165750.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:10.346Z,1510165750.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:10.731Z,1510165750.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:10.762Z,1510165750.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:11.135Z,1510165751.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:11.150Z,1510165751.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:11.526Z,1510165751.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:11.556Z,1510165751.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:11.942Z,1510165751.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:11.959Z,1510165751.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:12.343Z,1510165752.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:12.358Z,1510165752.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:12.738Z,1510165752.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:12.800Z,1510165752.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:13.131Z,1510165753.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:13.152Z,1510165753.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:13.534Z,1510165753.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:13.550Z,1510165753.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:13.933Z,1510165753.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:13.950Z,1510165753.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:14.334Z,1510165754.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:14.351Z,1510165754.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:14.734Z,1510165754.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:14.750Z,1510165754.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:15.137Z,1510165755.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:15.166Z,1510165755.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:15.542Z,1510165755.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:15.564Z,1510165755.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:15.943Z,1510165755.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:15.963Z,1510165755.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:16.334Z,1510165756.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:16.350Z,1510165756.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:16.731Z,1510165756.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:16.763Z,1510165756.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:17.135Z,1510165757.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:17.155Z,1510165757.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:17.526Z,1510165757.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:17.557Z,1510165757.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:17.943Z,1510165757.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:17.960Z,1510165757.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:18.344Z,1510165758.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:18.363Z,1510165758.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:18.737Z,1510165758.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:18.767Z,1510165758.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:19.131Z,1510165759.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:19.162Z,1510165759.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:19.527Z,1510165759.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:19.550Z,1510165759.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:19.932Z,1510165759.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:19.949Z,1510165759.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:20.328Z,1510165760.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:20.363Z,1510165760.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:20.730Z,1510165760.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:20.779Z,1510165760.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:21.139Z,1510165761.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:21.181Z,1510165761.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:21.543Z,1510165761.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:21.585Z,1510165761.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:21.944Z,1510165761.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:22.018Z,1510165762.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:22.327Z,1510165762.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:22.344Z,1510165762.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:22.730Z,1510165762.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:22.747Z,1510165762.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:23.130Z,1510165763.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:23.150Z,1510165763.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:23.529Z,1510165763.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:23.546Z,1510165763.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:23.942Z,1510165763.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:23.964Z,1510165763.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:24.343Z,1510165764.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:24.407Z,1510165764.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:24.751Z,1510165764.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:24.767Z,1510165764.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:25.131Z,1510165765.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:25.184Z,1510165765.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:28.211Z,1510165768.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:28.227Z,1510165768.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:28.360Z,1510165768.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:28.406Z,1510165768.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:28.770Z,1510165768.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:28.827Z,1510165768.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:29.169Z,1510165769.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:29.210Z,1510165769.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:29.562Z,1510165769.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:29.619Z,1510165769.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:29.964Z,1510165769.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:29.989Z,1510165769.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:30.364Z,1510165770.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:30.381Z,1510165770.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:30.773Z,1510165770.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:30.804Z,1510165770.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:31.184Z,1510165771.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:31.229Z,1510165771.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:31.583Z,1510165771.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:31.607Z,1510165771.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:31.952Z,1510165771.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:31.986Z,1510165771.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:32.370Z,1510165772.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:32.396Z,1510165772.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:32.752Z,1510165772.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:32.787Z,1510165772.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:33.176Z,1510165773.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:33.192Z,1510165773.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:33.575Z,1510165773.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:33.596Z,1510165773.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:33.977Z,1510165773.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:33.996Z,1510165773.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:34.355Z,1510165774.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:34.399Z,1510165774.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:34.759Z,1510165774.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:34.791Z,1510165774.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:35.157Z,1510165775.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:35.183Z,1510165775.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:35.553Z,1510165775.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:35.595Z,1510165775.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:35.978Z,1510165775.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:35.000Z,1510165776.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:36.377Z,1510165776.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:36.402Z,1510165776.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:36.774Z,1510165776.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:36.801Z,1510165776.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:37.152Z,1510165777.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:37.181Z,1510165777.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:37.553Z,1510165777.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:37.569Z,1510165777.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:37.957Z,1510165777.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:38.012Z,1510165778.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:38.357Z,1510165778.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:38.374Z,1510165778.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:38.756Z,1510165778.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:38.772Z,1510165778.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:39.166Z,1510165779.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:39.183Z,1510165779.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:39.570Z,1510165779.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:39.587Z,1510165779.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:39.966Z,1510165779.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:39.982Z,1510165779.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:40.355Z,1510165780.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:40.378Z,1510165780.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:40.761Z,1510165780.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:40.778Z,1510165780.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:41.159Z,1510165781.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:41.176Z,1510165781.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:41.554Z,1510165781.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:41.582Z,1510165781.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:41.975Z,1510165781.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:41.995Z,1510165781.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:42.377Z,1510165782.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:42.427Z,1510165782.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:42.780Z,1510165782.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:42.798Z,1510165782.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:43.155Z,1510165783.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:43.194Z,1510165783.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:43.552Z,1510165783.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:43.578Z,1510165783.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:43.956Z,1510165783.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:43.983Z,1510165783.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:44.355Z,1510165784.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:44.384Z,1510165784.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:44.776Z,1510165784.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:44.801Z,1510165784.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:45.196Z,1510165785.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:45.231Z,1510165785.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:45.576Z,1510165785.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:45.618Z,1510165785.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:45.956Z,1510165785.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:45.985Z,1510165785.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:46.353Z,1510165786.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:46.389Z,1510165786.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:46.755Z,1510165786.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:46.790Z,1510165786.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:47.173Z,1510165787.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:47.189Z,1510165787.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:47.572Z,1510165787.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:47.589Z,1510165787.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:47.978Z,1510165787.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:47.999Z,1510165787.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:48.356Z,1510165788.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:48.386Z,1510165788.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:48.752Z,1510165788.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:48.786Z,1510165788.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:49.157Z,1510165789.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:49.182Z,1510165789.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:49.551Z,1510165789.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:49.583Z,1510165789.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:49.973Z,1510165789.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:50.036Z,1510165790.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:50.373Z,1510165790.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:50.441Z,1510165790.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:50.765Z,1510165790.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:50.792Z,1510165790.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:51.151Z,1510165791.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:51.168Z,1510165791.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:51.555Z,1510165791.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:51.616Z,1510165791.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:51.956Z,1510165791.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:51.995Z,1510165791.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:52.358Z,1510165792.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:52.410Z,1510165792.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:52.766Z,1510165792.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:52.796Z,1510165792.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:53.165Z,1510165793.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:53.212Z,1510165793.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:53.566Z,1510165793.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:53.592Z,1510165793.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:53.966Z,1510165793.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:54.010Z,1510165794.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:54.351Z,1510165794.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:54.371Z,1510165794.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:54.770Z,1510165794.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:54.801Z,1510165794.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:55.180Z,1510165795.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:55.216Z,1510165795.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:55.569Z,1510165795.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:55.594Z,1510165795.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:55.965Z,1510165795.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:56.017Z,1510165796.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:56.361Z,1510165796.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:56.397Z,1510165796.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:56.766Z,1510165796.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:56.798Z,1510165796.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:57.172Z,1510165797.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:57.210Z,1510165797.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:57.570Z,1510165797.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:57.606Z,1510165797.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:57.958Z,1510165797.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:57.975Z,1510165797.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:58.361Z,1510165798.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:58.429Z,1510165798.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:58.771Z,1510165798.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:58.788Z,1510165798.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:59.170Z,1510165799.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:59.186Z,1510165799.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:59.573Z,1510165799.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:59.593Z,1510165799.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:29:59.972Z,1510165799.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:29:59.988Z,1510165799.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:00.365Z,1510165800.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:00.381Z,1510165800.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:00.755Z,1510165800.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:00.814Z,1510165800.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:01.174Z,1510165801.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:01.194Z,1510165801.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:01.577Z,1510165801.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:01.595Z,1510165801.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:01.978Z,1510165801.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:01.995Z,1510165801.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:02.369Z,1510165802.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:02.397Z,1510165802.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:02.755Z,1510165802.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:02.785Z,1510165802.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:03.168Z,1510165803.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:03.191Z,1510165803.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:03.573Z,1510165803.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:03.590Z,1510165803.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:03.976Z,1510165803.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:03.997Z,1510165803.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:04.377Z,1510165804.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:04.396Z,1510165804.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:04.772Z,1510165804.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:04.803Z,1510165804.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:05.155Z,1510165805.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:05.181Z,1510165805.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:05.555Z,1510165805.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:05.596Z,1510165805.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:05.955Z,1510165805.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:05.998Z,1510165805.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:06.359Z,1510165806.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:06.389Z,1510165806.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:06.755Z,1510165806.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:06.788Z,1510165806.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:07.178Z,1510165807.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:07.208Z,1510165807.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:07.576Z,1510165807.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:07.596Z,1510165807.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:07.976Z,1510165807.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:08.033Z,1510165808.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:08.355Z,1510165808.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:08.392Z,1510165808.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:08.754Z,1510165808.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:08.788Z,1510165808.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:09.157Z,1510165809.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:09.189Z,1510165809.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:09.561Z,1510165809.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:09.598Z,1510165809.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:09.973Z,1510165809.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:09.990Z,1510165809.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:10.379Z,1510165810.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:10.400Z,1510165810.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:10.770Z,1510165810.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:10.796Z,1510165810.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:11.152Z,1510165811.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:11.188Z,1510165811.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:11.561Z,1510165811.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:11.596Z,1510165811.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:11.960Z,1510165811.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:12.037Z,1510165812.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:12.358Z,1510165812.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:12.412Z,1510165812.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:12.755Z,1510165812.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:12.785Z,1510165812.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:13.180Z,1510165813.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:13.256Z,1510165813.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:13.582Z,1510165813.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:13.643Z,1510165813.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:13.966Z,1510165813.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:13.995Z,1510165813.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:14.358Z,1510165814.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:14.390Z,1510165814.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:14.756Z,1510165814.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:14.804Z,1510165814.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:15.153Z,1510165815.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:15.170Z,1510165815.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:15.556Z,1510165815.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:15.613Z,1510165815.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:15.974Z,1510165815.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:16.016Z,1510165816.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:16.374Z,1510165816.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:16.407Z,1510165816.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:16.766Z,1510165816.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:16.806Z,1510165816.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:17.160Z,1510165817.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:17.178Z,1510165817.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:17.554Z,1510165817.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:17.572Z,1510165817.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:17.961Z,1510165817.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:17.981Z,1510165817.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:18.360Z,1510165818.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:18.377Z,1510165818.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:18.754Z,1510165818.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:18.793Z,1510165818.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:19.166Z,1510165819.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:19.188Z,1510165819.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:19.570Z,1510165819.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:19.586Z,1510165819.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:19.967Z,1510165819.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:19.983Z,1510165819.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:20.363Z,1510165820.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:20.387Z,1510165820.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:20.765Z,1510165820.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:20.781Z,1510165820.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:21.163Z,1510165821.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:21.180Z,1510165821.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:21.568Z,1510165821.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:21.584Z,1510165821.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:21.978Z,1510165821.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:22.018Z,1510165822.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:22.370Z,1510165822.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:22.423Z,1510165822.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:22.767Z,1510165822.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:22.788Z,1510165822.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:23.162Z,1510165823.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:23.180Z,1510165823.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:23.558Z,1510165823.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:23.574Z,1510165823.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:23.966Z,1510165823.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:24.029Z,1510165824.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:24.358Z,1510165824.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:24.379Z,1510165824.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:24.770Z,1510165824.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:24.792Z,1510165824.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:25.174Z,1510165825.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:25.196Z,1510165825.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:28.366Z,1510165828.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:28.387Z,1510165828.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:28.486Z,1510165828.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:28.514Z,1510165828.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:28.895Z,1510165828.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:28.967Z,1510165828.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:29.292Z,1510165829.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:29.328Z,1510165829.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:29.690Z,1510165829.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:29.707Z,1510165829.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:30.106Z,1510165830.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:30.133Z,1510165830.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:30.509Z,1510165830.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:30.534Z,1510165830.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:30.902Z,1510165830.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:30.933Z,1510165830.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:31.303Z,1510165831.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:31.328Z,1510165831.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:31.694Z,1510165831.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:31.710Z,1510165831.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:32.102Z,1510165832.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:32.118Z,1510165832.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:32.495Z,1510165832.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:32.540Z,1510165832.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:32.912Z,1510165832.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:32.928Z,1510165832.928 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:32.928Z,1510165832.928 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 102
2017-11-08T18:30:32.928Z,1510165832.928 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T18:30:32.930Z,1510165832.930 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:32.930Z,1510165832.930 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 102
2017-11-08T18:30:32.930Z,1510165832.930 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T18:30:32.932Z,1510165832.932 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:32.932Z,1510165832.932 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 102
2017-11-08T18:30:32.932Z,1510165832.932 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T18:30:33.005Z,1510165833.005 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T18:30:33.005Z,1510165833.005 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T18:30:33.005Z,1510165833.005 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T18:30:33.312Z,1510165833.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:33.409Z,1510165833.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T18:30:33.409Z,1510165833.409 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 102
2017-11-08T18:30:33.409Z,1510165833.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T18:30:33.409Z,1510165833.409 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 102
2017-11-08T18:30:33.410Z,1510165833.410 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T18:30:33.410Z,1510165833.410 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 102
2017-11-08T18:30:33.702Z,1510165833.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:33.733Z,1510165833.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T18:30:33.733Z,1510165833.733 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:30:33.733Z,1510165833.733 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:30:33.734Z,1510165833.734 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T18:30:33.734Z,1510165833.734 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:30:33.734Z,1510165833.734 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:30:33.735Z,1510165833.735 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T18:30:33.735Z,1510165833.735 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:30:33.736Z,1510165833.736 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:30:34.098Z,1510165834.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:34.152Z,1510165834.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T18:30:34.153Z,1510165834.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:34.505Z,1510165834.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:34.534Z,1510165834.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T18:30:34.535Z,1510165834.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:34.894Z,1510165834.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:34.910Z,1510165834.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T18:30:34.911Z,1510165834.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:35.299Z,1510165835.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:35.340Z,1510165835.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T18:30:35.341Z,1510165835.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:35.694Z,1510165835.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:35.751Z,1510165835.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T18:30:35.757Z,1510165835.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:36.108Z,1510165836.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:36.142Z,1510165836.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T18:30:36.143Z,1510165836.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:36.506Z,1510165836.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:36.548Z,1510165836.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T18:30:36.549Z,1510165836.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:36.906Z,1510165836.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:36.922Z,1510165836.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T18:30:36.924Z,1510165836.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:37.299Z,1510165837.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:37.347Z,1510165837.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T18:30:37.348Z,1510165837.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:37.704Z,1510165837.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:37.722Z,1510165837.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T18:30:37.723Z,1510165837.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:38.101Z,1510165838.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:38.121Z,1510165838.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T18:30:38.122Z,1510165838.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:38.494Z,1510165838.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:38.510Z,1510165838.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T18:30:38.511Z,1510165838.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:38.901Z,1510165838.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:38.923Z,1510165838.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T18:30:38.924Z,1510165838.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:39.302Z,1510165839.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:39.318Z,1510165839.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T18:30:39.319Z,1510165839.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:39.706Z,1510165839.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:39.722Z,1510165839.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T18:30:39.723Z,1510165839.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:40.095Z,1510165840.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:40.115Z,1510165840.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T18:30:40.116Z,1510165840.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:40.497Z,1510165840.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:40.513Z,1510165840.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T18:30:40.514Z,1510165840.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:40.899Z,1510165840.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:40.915Z,1510165840.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T18:30:40.916Z,1510165840.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:41.295Z,1510165841.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:41.312Z,1510165841.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T18:30:41.313Z,1510165841.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:41.691Z,1510165841.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:41.723Z,1510165841.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T18:30:41.724Z,1510165841.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:42.102Z,1510165842.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:42.127Z,1510165842.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T18:30:42.128Z,1510165842.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:42.505Z,1510165842.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:42.522Z,1510165842.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T18:30:42.522Z,1510165842.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:42.902Z,1510165842.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:42.919Z,1510165842.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T18:30:42.920Z,1510165842.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:43.296Z,1510165843.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:43.312Z,1510165843.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T18:30:43.313Z,1510165843.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:43.698Z,1510165843.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:43.714Z,1510165843.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T18:30:43.715Z,1510165843.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:44.099Z,1510165844.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:44.115Z,1510165844.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T18:30:44.116Z,1510165844.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:44.500Z,1510165844.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:44.516Z,1510165844.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T18:30:44.517Z,1510165844.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:44.874Z,1510165844.874 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T18:30:44.874Z,1510165844.874 [NAL9602] Data Fault, FailCount= 4
2017-11-08T18:30:44.874Z,1510165844.874 [NAL9602](ERROR): Data Fault
2017-11-08T18:30:44.908Z,1510165844.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:44.923Z,1510165844.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T18:30:44.924Z,1510165844.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:45.017Z,1510165845.017 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T18:30:45.270Z,1510165845.270 [NAL9602](INFO): Powering down
2017-11-08T18:30:45.299Z,1510165845.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:45.315Z,1510165845.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T18:30:45.315Z,1510165845.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:45.697Z,1510165845.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:45.751Z,1510165845.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T18:30:45.752Z,1510165845.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:46.096Z,1510165846.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:46.112Z,1510165846.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T18:30:46.113Z,1510165846.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:46.188Z,1510165846.188 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T18:30:46.189Z,1510165846.189 [NAL9602] No Fault, FailCount= 4
2017-11-08T18:30:46.492Z,1510165846.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:46.509Z,1510165846.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T18:30:46.510Z,1510165846.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:46.901Z,1510165846.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:46.917Z,1510165846.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T18:30:46.918Z,1510165846.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:47.293Z,1510165847.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:47.308Z,1510165847.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T18:30:47.309Z,1510165847.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:47.697Z,1510165847.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:47.713Z,1510165847.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T18:30:47.714Z,1510165847.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:48.097Z,1510165848.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:48.113Z,1510165848.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T18:30:48.114Z,1510165848.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:48.486Z,1510165848.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:48.519Z,1510165848.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T18:30:48.520Z,1510165848.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:48.887Z,1510165848.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:48.919Z,1510165848.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T18:30:48.920Z,1510165848.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:49.290Z,1510165849.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:49.319Z,1510165849.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T18:30:49.320Z,1510165849.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:49.686Z,1510165849.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:49.702Z,1510165849.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T18:30:49.703Z,1510165849.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:50.087Z,1510165850.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:50.103Z,1510165850.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T18:30:50.104Z,1510165850.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:50.495Z,1510165850.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:50.527Z,1510165850.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T18:30:50.528Z,1510165850.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:50.891Z,1510165850.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:50.907Z,1510165850.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T18:30:50.908Z,1510165850.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:51.291Z,1510165851.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:51.307Z,1510165851.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T18:30:51.308Z,1510165851.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:51.695Z,1510165851.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:51.711Z,1510165851.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T18:30:51.713Z,1510165851.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:52.090Z,1510165852.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:52.105Z,1510165852.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T18:30:52.106Z,1510165852.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:52.523Z,1510165852.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:52.547Z,1510165852.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T18:30:52.548Z,1510165852.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:52.890Z,1510165852.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:52.919Z,1510165852.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-08T18:30:52.924Z,1510165852.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:53.294Z,1510165853.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:53.311Z,1510165853.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:53.696Z,1510165853.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:53.713Z,1510165853.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:54.096Z,1510165854.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:54.113Z,1510165854.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:54.496Z,1510165854.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:54.513Z,1510165854.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:54.897Z,1510165854.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:54.915Z,1510165854.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:55.296Z,1510165855.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:55.312Z,1510165855.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:55.696Z,1510165855.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:55.712Z,1510165855.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:56.098Z,1510165856.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:56.114Z,1510165856.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:56.498Z,1510165856.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:56.563Z,1510165856.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:56.896Z,1510165856.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:56.912Z,1510165856.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:57.297Z,1510165857.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:57.313Z,1510165857.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:57.697Z,1510165857.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:57.713Z,1510165857.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:58.096Z,1510165858.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:58.133Z,1510165858.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:58.496Z,1510165858.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:58.513Z,1510165858.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:58.893Z,1510165858.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:58.952Z,1510165858.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:59.310Z,1510165859.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:59.334Z,1510165859.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:30:59.687Z,1510165859.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:30:59.740Z,1510165859.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:00.101Z,1510165860.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:00.124Z,1510165860.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:00.487Z,1510165860.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:00.511Z,1510165860.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:00.887Z,1510165860.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:00.925Z,1510165860.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:01.291Z,1510165861.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:01.322Z,1510165861.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:01.690Z,1510165861.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:01.716Z,1510165861.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:02.087Z,1510165862.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:02.120Z,1510165862.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:02.490Z,1510165862.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:02.520Z,1510165862.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:02.890Z,1510165862.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:02.915Z,1510165862.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:03.291Z,1510165863.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:03.325Z,1510165863.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:03.691Z,1510165863.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:03.720Z,1510165863.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:04.087Z,1510165864.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:04.119Z,1510165864.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:04.487Z,1510165864.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:04.512Z,1510165864.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:04.891Z,1510165864.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:04.924Z,1510165864.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:05.291Z,1510165865.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:05.307Z,1510165865.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:05.687Z,1510165865.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:05.704Z,1510165865.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:06.090Z,1510165866.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:06.107Z,1510165866.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:06.490Z,1510165866.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:06.507Z,1510165866.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:06.888Z,1510165866.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:06.904Z,1510165866.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:07.294Z,1510165867.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:07.309Z,1510165867.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:07.689Z,1510165867.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:07.705Z,1510165867.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:08.090Z,1510165868.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:08.151Z,1510165868.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:08.494Z,1510165868.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:08.509Z,1510165868.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:08.889Z,1510165868.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:08.905Z,1510165868.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:09.294Z,1510165869.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:09.310Z,1510165869.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:09.694Z,1510165869.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:09.710Z,1510165869.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:10.090Z,1510165870.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:10.111Z,1510165870.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:10.489Z,1510165870.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:10.506Z,1510165870.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:10.893Z,1510165870.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:10.909Z,1510165870.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:11.289Z,1510165871.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:11.305Z,1510165871.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:11.689Z,1510165871.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:11.706Z,1510165871.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:12.101Z,1510165872.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:12.137Z,1510165872.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:12.493Z,1510165872.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:12.509Z,1510165872.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:12.889Z,1510165872.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:12.906Z,1510165872.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:13.293Z,1510165873.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:13.309Z,1510165873.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:13.694Z,1510165873.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:13.709Z,1510165873.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:14.090Z,1510165874.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:14.106Z,1510165874.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:14.494Z,1510165874.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:14.509Z,1510165874.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:14.894Z,1510165874.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:14.910Z,1510165874.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:15.277Z,1510165875.277 [NAL9602](INFO): Powering up NAL9602
2017-11-08T18:31:15.295Z,1510165875.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:15.311Z,1510165875.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:15.694Z,1510165875.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:15.710Z,1510165875.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:16.094Z,1510165876.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:16.110Z,1510165876.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:16.494Z,1510165876.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:16.510Z,1510165876.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:16.894Z,1510165876.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:16.910Z,1510165876.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:17.290Z,1510165877.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:17.311Z,1510165877.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:17.690Z,1510165877.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:17.706Z,1510165877.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:18.090Z,1510165878.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:18.111Z,1510165878.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:18.494Z,1510165878.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:18.510Z,1510165878.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:18.894Z,1510165878.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:18.911Z,1510165878.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:19.294Z,1510165879.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:19.348Z,1510165879.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:19.697Z,1510165879.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:19.713Z,1510165879.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:20.097Z,1510165880.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:20.113Z,1510165880.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:20.497Z,1510165880.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:20.545Z,1510165880.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:20.896Z,1510165880.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:20.913Z,1510165880.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:21.296Z,1510165881.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:21.314Z,1510165881.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:21.695Z,1510165881.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:21.745Z,1510165881.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:22.096Z,1510165882.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:22.112Z,1510165882.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:22.497Z,1510165882.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:22.553Z,1510165882.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:22.894Z,1510165882.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:22.915Z,1510165882.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:23.296Z,1510165883.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:23.312Z,1510165883.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:23.693Z,1510165883.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:23.709Z,1510165883.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:24.096Z,1510165884.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:24.112Z,1510165884.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:24.496Z,1510165884.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:24.519Z,1510165884.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:24.522Z,1510165884.522 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T18:31:24.522Z,1510165884.522 [Default:CheckIn:C.Wait] Stopped
2017-11-08T18:31:24.522Z,1510165884.522 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T18:31:24.523Z,1510165884.523 [Default:CheckIn:D] Running Loop=1
2017-11-08T18:31:24.887Z,1510165884.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:24.921Z,1510165884.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:24.924Z,1510165884.924 [Default:CheckIn:D] Stopped
2017-11-08T18:31:24.924Z,1510165884.924 [Default:CheckIn:E] Running Loop=1
2017-11-08T18:31:25.300Z,1510165885.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:25.316Z,1510165885.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:25.319Z,1510165885.319 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 304.732389 min 
2017-11-08T18:31:25.320Z,1510165885.320 [Default:CheckIn:E] Stopped
2017-11-08T18:31:25.320Z,1510165885.320 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T18:31:25.320Z,1510165885.320 [Default:CheckIn] Stopped
2017-11-08T18:31:25.320Z,1510165885.320 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T18:31:25.320Z,1510165885.320 [Default:CheckIn](INFO): Running loop #18
2017-11-08T18:31:25.320Z,1510165885.320 [Default:CheckIn] Running Loop=18
2017-11-08T18:31:25.320Z,1510165885.320 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T18:31:25.320Z,1510165885.320 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T18:31:28.372Z,1510165888.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:28.388Z,1510165888.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:28.530Z,1510165888.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:28.546Z,1510165888.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:28.909Z,1510165888.909 [NAL9602](INFO): NAL9602 initialized
2017-11-08T18:31:28.926Z,1510165888.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:28.942Z,1510165888.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:29.326Z,1510165889.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:29.347Z,1510165889.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:29.727Z,1510165889.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:29.748Z,1510165889.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:30.134Z,1510165890.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:30.150Z,1510165890.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:30.534Z,1510165890.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:30.576Z,1510165890.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:30.921Z,1510165890.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:30.938Z,1510165890.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:31.324Z,1510165891.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:31.349Z,1510165891.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:31.726Z,1510165891.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:31.756Z,1510165891.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:32.135Z,1510165892.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:32.156Z,1510165892.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:32.535Z,1510165892.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:32.552Z,1510165892.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:32.935Z,1510165892.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:32.952Z,1510165892.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:33.326Z,1510165893.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:33.348Z,1510165893.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:33.723Z,1510165893.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:33.755Z,1510165893.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:34.127Z,1510165894.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:34.147Z,1510165894.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:34.539Z,1510165894.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:34.560Z,1510165894.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:34.936Z,1510165894.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:34.952Z,1510165894.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:35.340Z,1510165895.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:35.356Z,1510165895.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:35.736Z,1510165895.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:35.810Z,1510165895.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:36.119Z,1510165896.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:36.152Z,1510165896.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:36.519Z,1510165896.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:36.546Z,1510165896.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:36.919Z,1510165896.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:36.952Z,1510165896.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:37.320Z,1510165897.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:37.348Z,1510165897.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:37.719Z,1510165897.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:37.746Z,1510165897.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:38.136Z,1510165898.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:38.152Z,1510165898.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:38.540Z,1510165898.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:38.556Z,1510165898.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:38.940Z,1510165898.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:38.957Z,1510165898.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:39.319Z,1510165899.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:39.345Z,1510165899.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:39.719Z,1510165899.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:39.744Z,1510165899.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:40.121Z,1510165900.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:40.147Z,1510165900.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:40.519Z,1510165900.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:40.544Z,1510165900.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:40.934Z,1510165900.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:40.964Z,1510165900.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:41.340Z,1510165901.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:41.400Z,1510165901.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:41.730Z,1510165901.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:41.760Z,1510165901.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:42.119Z,1510165902.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:42.175Z,1510165902.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:42.520Z,1510165902.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:42.552Z,1510165902.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:42.919Z,1510165902.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:42.976Z,1510165902.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:43.320Z,1510165903.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:43.336Z,1510165903.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:43.719Z,1510165903.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:43.736Z,1510165903.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:44.134Z,1510165904.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:44.166Z,1510165904.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:44.534Z,1510165904.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:44.562Z,1510165904.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:44.934Z,1510165904.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:44.966Z,1510165904.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:45.324Z,1510165905.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:45.340Z,1510165905.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:45.720Z,1510165905.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:45.737Z,1510165905.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:46.121Z,1510165906.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:46.137Z,1510165906.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:46.519Z,1510165906.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:46.535Z,1510165906.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:46.935Z,1510165906.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:46.965Z,1510165906.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:47.330Z,1510165907.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:47.362Z,1510165907.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:47.735Z,1510165907.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:47.767Z,1510165907.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:48.122Z,1510165908.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:48.139Z,1510165908.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:48.521Z,1510165908.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:48.537Z,1510165908.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:48.921Z,1510165908.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:48.937Z,1510165908.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:49.323Z,1510165909.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:49.344Z,1510165909.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:49.721Z,1510165909.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:49.736Z,1510165909.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:50.130Z,1510165910.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:50.146Z,1510165910.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:50.534Z,1510165910.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:50.550Z,1510165910.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:50.933Z,1510165910.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:50.973Z,1510165910.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:51.321Z,1510165911.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:51.375Z,1510165911.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:51.724Z,1510165911.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:51.747Z,1510165911.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:52.122Z,1510165912.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:52.143Z,1510165912.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:52.521Z,1510165912.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:52.537Z,1510165912.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:52.930Z,1510165912.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:52.946Z,1510165912.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:53.329Z,1510165913.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:53.345Z,1510165913.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:53.730Z,1510165913.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:53.746Z,1510165913.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:54.125Z,1510165914.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:54.141Z,1510165914.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:54.526Z,1510165914.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:54.541Z,1510165914.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:54.921Z,1510165914.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:54.938Z,1510165914.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:55.324Z,1510165915.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:55.353Z,1510165915.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:55.726Z,1510165915.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:55.742Z,1510165915.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:56.131Z,1510165916.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:56.152Z,1510165916.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:56.534Z,1510165916.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:56.550Z,1510165916.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:56.931Z,1510165916.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:56.947Z,1510165916.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:57.321Z,1510165917.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:57.338Z,1510165917.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:57.726Z,1510165917.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:57.743Z,1510165917.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:58.124Z,1510165918.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:58.147Z,1510165918.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:58.519Z,1510165918.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:58.542Z,1510165918.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:58.932Z,1510165918.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:58.949Z,1510165918.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:59.332Z,1510165919.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:59.349Z,1510165919.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:31:59.731Z,1510165919.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:31:59.748Z,1510165919.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:00.126Z,1510165920.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:00.147Z,1510165920.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:00.522Z,1510165920.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:00.543Z,1510165920.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:00.925Z,1510165920.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:00.942Z,1510165920.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:01.326Z,1510165921.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:01.343Z,1510165921.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:01.722Z,1510165921.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:01.795Z,1510165921.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:02.130Z,1510165922.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:02.202Z,1510165922.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:02.534Z,1510165922.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:02.551Z,1510165922.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:02.931Z,1510165922.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:02.947Z,1510165922.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:03.325Z,1510165923.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:03.383Z,1510165923.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:03.722Z,1510165923.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:03.828Z,1510165923.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:04.126Z,1510165924.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:04.180Z,1510165924.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:04.525Z,1510165924.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:04.541Z,1510165924.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:04.934Z,1510165924.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:04.956Z,1510165924.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:05.335Z,1510165925.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:05.350Z,1510165925.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:05.734Z,1510165925.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:05.756Z,1510165925.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:06.123Z,1510165926.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:06.153Z,1510165926.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:06.522Z,1510165926.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:06.537Z,1510165926.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:06.918Z,1510165926.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:06.948Z,1510165926.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:07.326Z,1510165927.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:07.342Z,1510165927.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:07.722Z,1510165927.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:07.738Z,1510165927.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:08.135Z,1510165928.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:08.156Z,1510165928.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:08.535Z,1510165928.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:08.555Z,1510165928.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:08.935Z,1510165928.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:08.951Z,1510165928.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:09.325Z,1510165929.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:09.341Z,1510165929.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:09.724Z,1510165929.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:09.747Z,1510165929.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:10.123Z,1510165930.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:10.139Z,1510165930.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:10.523Z,1510165930.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:10.545Z,1510165930.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:10.935Z,1510165930.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:10.956Z,1510165930.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:11.335Z,1510165931.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:11.351Z,1510165931.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:11.735Z,1510165931.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:11.756Z,1510165931.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:12.125Z,1510165932.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:12.142Z,1510165932.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:12.523Z,1510165932.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:12.582Z,1510165932.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:12.926Z,1510165932.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:12.947Z,1510165932.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:13.326Z,1510165933.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:13.343Z,1510165933.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:13.722Z,1510165933.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:13.743Z,1510165933.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:14.135Z,1510165934.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:14.156Z,1510165934.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:14.538Z,1510165934.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:14.555Z,1510165934.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:14.935Z,1510165934.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:14.951Z,1510165934.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:15.325Z,1510165935.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:15.348Z,1510165935.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:15.723Z,1510165935.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:15.744Z,1510165935.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:16.122Z,1510165936.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:16.138Z,1510165936.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:16.525Z,1510165936.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:16.548Z,1510165936.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:16.934Z,1510165936.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:16.950Z,1510165936.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:17.335Z,1510165937.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:17.355Z,1510165937.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:17.734Z,1510165937.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:17.756Z,1510165937.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:18.123Z,1510165938.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:18.144Z,1510165938.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:18.522Z,1510165938.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:18.538Z,1510165938.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:18.925Z,1510165938.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:18.942Z,1510165938.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:19.323Z,1510165939.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:19.345Z,1510165939.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:19.719Z,1510165939.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:19.754Z,1510165939.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:20.134Z,1510165940.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:20.156Z,1510165940.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:20.534Z,1510165940.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:20.555Z,1510165940.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:20.936Z,1510165940.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:20.959Z,1510165940.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:21.327Z,1510165941.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:21.343Z,1510165941.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:21.723Z,1510165941.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:21.748Z,1510165941.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:22.128Z,1510165942.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:22.143Z,1510165942.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:22.525Z,1510165942.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:22.548Z,1510165942.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:22.939Z,1510165942.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:22.947Z,1510165942.947 [BPC1](ERROR): Failed to parse message.
2017-11-08T18:32:22.947Z,1510165942.947 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T18:32:22.947Z,1510165942.947 [BPC1] Data Fault, FailCount= 1
2017-11-08T18:32:22.947Z,1510165942.947 [BPC1](ERROR): Data Fault
2017-11-08T18:32:22.957Z,1510165942.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:23.037Z,1510165943.037 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T18:32:23.337Z,1510165943.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:23.353Z,1510165943.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:23.730Z,1510165943.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:23.760Z,1510165943.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:24.120Z,1510165944.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:24.153Z,1510165944.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:24.233Z,1510165944.233 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T18:32:24.233Z,1510165944.233 [BPC1] No Fault, FailCount= 1
2017-11-08T18:32:24.520Z,1510165944.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:24.596Z,1510165944.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:24.920Z,1510165944.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:24.950Z,1510165944.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:25.332Z,1510165945.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:25.356Z,1510165945.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:28.402Z,1510165948.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:28.419Z,1510165948.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:28.566Z,1510165948.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:28.608Z,1510165948.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:28.966Z,1510165948.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:28.995Z,1510165948.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:29.370Z,1510165949.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:29.396Z,1510165949.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:29.751Z,1510165949.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:29.767Z,1510165949.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:30.155Z,1510165950.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:30.172Z,1510165950.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:30.555Z,1510165950.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:30.572Z,1510165950.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:30.962Z,1510165950.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:30.998Z,1510165950.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:31.366Z,1510165951.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:31.396Z,1510165951.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:31.765Z,1510165951.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:31.798Z,1510165951.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:32.151Z,1510165952.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:32.168Z,1510165952.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:32.554Z,1510165952.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:32.571Z,1510165952.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:32.952Z,1510165952.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:33.001Z,1510165953.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:33.356Z,1510165953.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:33.393Z,1510165953.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:33.755Z,1510165953.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:33.776Z,1510165953.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:34.165Z,1510165954.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:34.202Z,1510165954.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:34.566Z,1510165954.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:34.607Z,1510165954.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:34.966Z,1510165954.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:35.007Z,1510165955.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:35.353Z,1510165955.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:35.370Z,1510165955.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:35.752Z,1510165955.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:35.768Z,1510165955.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:36.155Z,1510165956.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:36.172Z,1510165956.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:36.554Z,1510165956.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:36.570Z,1510165956.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:36.958Z,1510165956.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:36.975Z,1510165956.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:37.361Z,1510165957.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:37.378Z,1510165957.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:37.765Z,1510165957.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:37.782Z,1510165957.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:38.153Z,1510165958.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:38.169Z,1510165958.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:38.555Z,1510165958.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:38.576Z,1510165958.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:38.954Z,1510165958.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:38.970Z,1510165958.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:39.355Z,1510165959.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:39.372Z,1510165959.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:39.752Z,1510165959.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:39.773Z,1510165959.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:40.170Z,1510165960.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:40.205Z,1510165960.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:40.570Z,1510165960.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:40.606Z,1510165960.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:40.962Z,1510165960.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:40.979Z,1510165960.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:41.354Z,1510165961.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:41.376Z,1510165961.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:41.758Z,1510165961.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:41.775Z,1510165961.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:42.157Z,1510165962.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:42.182Z,1510165962.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:42.558Z,1510165962.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:42.575Z,1510165962.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:42.963Z,1510165962.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:42.981Z,1510165962.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:43.366Z,1510165963.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:43.383Z,1510165963.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:43.763Z,1510165963.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:43.820Z,1510165963.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:44.151Z,1510165964.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:44.216Z,1510165964.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:44.555Z,1510165964.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:44.584Z,1510165964.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:44.951Z,1510165964.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:45.000Z,1510165965.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:45.352Z,1510165965.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:45.383Z,1510165965.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:45.751Z,1510165965.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:45.810Z,1510165965.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:46.168Z,1510165966.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:46.184Z,1510165966.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:46.567Z,1510165966.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:46.591Z,1510165966.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:46.967Z,1510165966.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:46.984Z,1510165966.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:47.347Z,1510165967.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:47.376Z,1510165967.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:47.747Z,1510165967.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:47.779Z,1510165967.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:48.148Z,1510165968.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:48.176Z,1510165968.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:48.551Z,1510165968.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:48.577Z,1510165968.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:48.964Z,1510165968.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:48.980Z,1510165968.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:49.372Z,1510165969.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:49.388Z,1510165969.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:49.773Z,1510165969.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:49.788Z,1510165969.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:50.147Z,1510165970.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:50.173Z,1510165970.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:50.547Z,1510165970.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:50.576Z,1510165970.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:50.947Z,1510165970.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:50.986Z,1510165970.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:51.352Z,1510165971.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:51.378Z,1510165971.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:51.755Z,1510165971.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:51.788Z,1510165971.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:52.172Z,1510165972.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:52.191Z,1510165972.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:52.567Z,1510165972.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:52.585Z,1510165972.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:52.968Z,1510165972.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:52.985Z,1510165972.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:53.348Z,1510165973.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:53.382Z,1510165973.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:53.747Z,1510165973.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:53.788Z,1510165973.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:54.152Z,1510165974.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:54.216Z,1510165974.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:54.547Z,1510165974.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:54.590Z,1510165974.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:54.969Z,1510165974.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:54.986Z,1510165974.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:55.061Z,1510165975.061 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T18:32:55.368Z,1510165975.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:55.391Z,1510165975.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:55.768Z,1510165975.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:55.791Z,1510165975.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:56.147Z,1510165976.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:56.179Z,1510165976.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:56.551Z,1510165976.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:56.587Z,1510165976.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:56.951Z,1510165976.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:56.977Z,1510165976.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:57.352Z,1510165977.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:57.378Z,1510165977.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:57.751Z,1510165977.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:57.777Z,1510165977.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:58.172Z,1510165978.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:58.188Z,1510165978.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:58.572Z,1510165978.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:58.588Z,1510165978.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:58.967Z,1510165978.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:58.985Z,1510165978.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:59.352Z,1510165979.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:59.376Z,1510165979.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:32:59.751Z,1510165979.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:32:59.808Z,1510165979.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:00.152Z,1510165980.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:00.188Z,1510165980.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:00.547Z,1510165980.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:00.563Z,1510165980.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:00.962Z,1510165980.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:00.992Z,1510165980.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:01.366Z,1510165981.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:01.400Z,1510165981.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:01.765Z,1510165981.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:01.792Z,1510165981.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:02.151Z,1510165982.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:02.168Z,1510165982.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:02.551Z,1510165982.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:02.568Z,1510165982.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:02.952Z,1510165982.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:02.988Z,1510165982.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:03.355Z,1510165983.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:03.376Z,1510165983.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:03.755Z,1510165983.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:03.776Z,1510165983.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:04.165Z,1510165984.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:04.207Z,1510165984.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:04.573Z,1510165984.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:04.625Z,1510165984.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:04.966Z,1510165984.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:05.007Z,1510165985.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:05.354Z,1510165985.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:05.376Z,1510165985.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:05.755Z,1510165985.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:05.772Z,1510165985.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:06.155Z,1510165986.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:06.176Z,1510165986.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:06.555Z,1510165986.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:06.611Z,1510165986.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:06.967Z,1510165986.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:07.007Z,1510165987.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:07.366Z,1510165987.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:07.424Z,1510165987.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:07.766Z,1510165987.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:07.782Z,1510165987.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:08.153Z,1510165988.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:08.170Z,1510165988.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:08.554Z,1510165988.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:08.572Z,1510165988.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:08.954Z,1510165988.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:08.970Z,1510165988.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:09.355Z,1510165989.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:09.372Z,1510165989.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:09.755Z,1510165989.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:09.771Z,1510165989.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:10.162Z,1510165990.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:10.178Z,1510165990.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:10.562Z,1510165990.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:10.579Z,1510165990.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:10.966Z,1510165990.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:11.004Z,1510165991.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:11.356Z,1510165991.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:11.373Z,1510165991.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:11.750Z,1510165991.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:11.779Z,1510165991.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:12.156Z,1510165992.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:12.173Z,1510165992.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:12.554Z,1510165992.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:12.570Z,1510165992.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:12.958Z,1510165992.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:12.976Z,1510165992.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:13.365Z,1510165993.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:13.388Z,1510165993.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:13.765Z,1510165993.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:13.782Z,1510165993.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:14.150Z,1510165994.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:14.179Z,1510165994.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:14.557Z,1510165994.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:14.574Z,1510165994.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:14.954Z,1510165994.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:14.970Z,1510165994.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:15.351Z,1510165995.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:15.382Z,1510165995.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:15.757Z,1510165995.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:15.815Z,1510165995.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:16.160Z,1510165996.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:16.177Z,1510165996.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:16.566Z,1510165996.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:16.587Z,1510165996.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:16.962Z,1510165996.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:16.979Z,1510165996.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:17.355Z,1510165997.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:17.371Z,1510165997.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:17.758Z,1510165997.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:17.774Z,1510165997.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:18.158Z,1510165998.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:18.175Z,1510165998.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:18.558Z,1510165998.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:18.575Z,1510165998.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:18.959Z,1510165998.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:18.976Z,1510165998.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:19.366Z,1510165999.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:19.383Z,1510165999.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:19.762Z,1510165999.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:19.783Z,1510165999.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:20.151Z,1510166000.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:20.182Z,1510166000.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:20.558Z,1510166000.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:20.575Z,1510166000.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:20.957Z,1510166000.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:20.974Z,1510166000.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:21.357Z,1510166001.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:21.375Z,1510166001.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:21.757Z,1510166001.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:21.775Z,1510166001.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:22.165Z,1510166002.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:22.183Z,1510166002.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:22.566Z,1510166002.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:22.584Z,1510166002.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:22.962Z,1510166002.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:22.979Z,1510166002.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:23.357Z,1510166003.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:23.374Z,1510166003.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:23.752Z,1510166003.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:23.770Z,1510166003.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:24.156Z,1510166004.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:24.173Z,1510166004.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:24.557Z,1510166004.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:24.573Z,1510166004.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:24.970Z,1510166004.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:24.987Z,1510166004.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:25.370Z,1510166005.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:25.386Z,1510166005.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:28.465Z,1510166008.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:28.549Z,1510166008.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:28.672Z,1510166008.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:28.711Z,1510166008.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:29.076Z,1510166009.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:29.092Z,1510166009.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:29.472Z,1510166009.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:29.531Z,1510166009.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:29.890Z,1510166009.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:29.913Z,1510166009.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:30.282Z,1510166010.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:30.328Z,1510166010.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:30.682Z,1510166010.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:30.713Z,1510166010.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:31.071Z,1510166011.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:31.091Z,1510166011.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:31.470Z,1510166011.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:31.487Z,1510166011.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:31.882Z,1510166011.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:31.913Z,1510166011.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:32.282Z,1510166012.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:32.312Z,1510166012.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:32.682Z,1510166012.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:32.712Z,1510166012.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:33.071Z,1510166013.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:33.086Z,1510166013.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:33.466Z,1510166013.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:33.483Z,1510166013.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:33.882Z,1510166013.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:33.913Z,1510166013.913 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:33.913Z,1510166013.913 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 103
2017-11-08T18:33:33.913Z,1510166013.913 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T18:33:33.915Z,1510166013.915 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:33.915Z,1510166013.915 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 103
2017-11-08T18:33:33.915Z,1510166013.915 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T18:33:33.917Z,1510166013.917 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:33.917Z,1510166013.917 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 103
2017-11-08T18:33:33.917Z,1510166013.917 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T18:33:33.997Z,1510166013.997 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T18:33:33.997Z,1510166013.997 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T18:33:33.997Z,1510166013.997 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T18:33:34.277Z,1510166014.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:34.401Z,1510166014.401 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T18:33:34.401Z,1510166014.401 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 103
2017-11-08T18:33:34.401Z,1510166014.401 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T18:33:34.401Z,1510166014.401 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 103
2017-11-08T18:33:34.402Z,1510166014.402 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T18:33:34.402Z,1510166014.402 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 103
2017-11-08T18:33:34.674Z,1510166014.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:34.695Z,1510166014.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T18:33:34.695Z,1510166014.695 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:33:34.695Z,1510166014.695 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:33:34.696Z,1510166014.696 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T18:33:34.696Z,1510166014.696 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:33:34.697Z,1510166014.697 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:33:34.697Z,1510166014.697 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T18:33:34.697Z,1510166014.697 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:33:34.698Z,1510166014.698 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:33:35.066Z,1510166015.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:35.097Z,1510166015.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T18:33:35.098Z,1510166015.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:35.474Z,1510166015.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:35.489Z,1510166015.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T18:33:35.490Z,1510166015.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:35.879Z,1510166015.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:35.895Z,1510166015.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T18:33:35.896Z,1510166015.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:36.282Z,1510166016.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:36.303Z,1510166016.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T18:33:36.304Z,1510166016.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:36.683Z,1510166016.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:36.703Z,1510166016.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T18:33:36.704Z,1510166016.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:37.074Z,1510166017.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:37.095Z,1510166017.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T18:33:37.096Z,1510166017.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:37.471Z,1510166017.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:37.491Z,1510166017.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T18:33:37.492Z,1510166017.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:37.883Z,1510166017.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:37.903Z,1510166017.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T18:33:37.904Z,1510166017.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:38.282Z,1510166018.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:38.303Z,1510166018.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T18:33:38.304Z,1510166018.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:38.682Z,1510166018.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:38.738Z,1510166018.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T18:33:38.739Z,1510166018.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:39.075Z,1510166019.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:39.091Z,1510166019.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T18:33:39.092Z,1510166019.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:39.470Z,1510166019.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:39.492Z,1510166019.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T18:33:39.493Z,1510166019.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:39.882Z,1510166019.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:39.898Z,1510166019.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T18:33:39.899Z,1510166019.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:40.283Z,1510166020.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:40.303Z,1510166020.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T18:33:40.304Z,1510166020.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:40.683Z,1510166020.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:40.703Z,1510166020.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T18:33:40.704Z,1510166020.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:41.071Z,1510166021.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:41.093Z,1510166021.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T18:33:41.094Z,1510166021.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:41.474Z,1510166021.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:41.494Z,1510166021.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T18:33:41.495Z,1510166021.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:41.879Z,1510166021.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:41.895Z,1510166021.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T18:33:41.896Z,1510166021.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:42.283Z,1510166022.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:42.303Z,1510166022.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T18:33:42.304Z,1510166022.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:42.683Z,1510166022.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:42.703Z,1510166022.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T18:33:42.704Z,1510166022.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:43.075Z,1510166023.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:43.091Z,1510166023.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T18:33:43.092Z,1510166023.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:43.474Z,1510166023.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:43.490Z,1510166023.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T18:33:43.491Z,1510166023.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:43.884Z,1510166023.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:43.900Z,1510166023.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T18:33:43.901Z,1510166023.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:44.283Z,1510166024.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:44.303Z,1510166024.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T18:33:44.304Z,1510166024.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:44.682Z,1510166024.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:44.698Z,1510166024.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T18:33:44.699Z,1510166024.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:45.075Z,1510166025.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:45.092Z,1510166025.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T18:33:45.093Z,1510166025.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:45.473Z,1510166025.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:45.490Z,1510166025.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T18:33:45.491Z,1510166025.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:45.882Z,1510166025.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:45.900Z,1510166025.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T18:33:45.901Z,1510166025.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:46.287Z,1510166026.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:46.311Z,1510166026.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T18:33:46.312Z,1510166026.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:46.683Z,1510166026.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:46.700Z,1510166026.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T18:33:46.701Z,1510166026.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:47.074Z,1510166027.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:47.090Z,1510166027.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T18:33:47.091Z,1510166027.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:47.474Z,1510166027.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:47.494Z,1510166027.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T18:33:47.495Z,1510166027.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:47.883Z,1510166027.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:47.903Z,1510166027.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T18:33:47.904Z,1510166027.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:48.286Z,1510166028.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:48.302Z,1510166028.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T18:33:48.303Z,1510166028.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:48.687Z,1510166028.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:48.707Z,1510166028.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T18:33:48.708Z,1510166028.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:49.074Z,1510166029.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:49.090Z,1510166029.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T18:33:49.091Z,1510166029.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:49.471Z,1510166029.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:49.493Z,1510166029.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T18:33:49.494Z,1510166029.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:49.887Z,1510166029.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:49.956Z,1510166029.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T18:33:49.957Z,1510166029.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:50.283Z,1510166030.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:50.299Z,1510166030.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T18:33:50.300Z,1510166030.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:50.682Z,1510166030.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:50.702Z,1510166030.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T18:33:50.703Z,1510166030.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:51.075Z,1510166031.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:51.147Z,1510166031.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T18:33:51.148Z,1510166031.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:51.474Z,1510166031.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:51.489Z,1510166031.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T18:33:51.490Z,1510166031.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:51.878Z,1510166031.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:51.906Z,1510166031.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T18:33:51.907Z,1510166031.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:52.281Z,1510166032.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:52.335Z,1510166032.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T18:33:52.336Z,1510166032.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:52.687Z,1510166032.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:52.703Z,1510166032.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T18:33:52.704Z,1510166032.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:53.077Z,1510166033.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:53.135Z,1510166033.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T18:33:53.136Z,1510166033.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:53.472Z,1510166033.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:53.498Z,1510166033.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T18:33:53.499Z,1510166033.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:53.882Z,1510166033.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:53.902Z,1510166033.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-08T18:33:53.903Z,1510166033.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:54.289Z,1510166034.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:54.305Z,1510166034.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:54.685Z,1510166034.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:54.702Z,1510166034.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:55.065Z,1510166035.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:55.101Z,1510166035.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:55.468Z,1510166035.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:55.503Z,1510166035.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:55.890Z,1510166035.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:55.906Z,1510166035.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:56.289Z,1510166036.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:56.305Z,1510166036.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:56.686Z,1510166036.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:56.702Z,1510166036.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:57.068Z,1510166037.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:57.100Z,1510166037.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:57.467Z,1510166037.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:57.499Z,1510166037.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:57.888Z,1510166037.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:57.905Z,1510166037.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:58.285Z,1510166038.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:58.307Z,1510166038.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:58.684Z,1510166038.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:58.700Z,1510166038.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:59.063Z,1510166039.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:59.098Z,1510166039.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:59.467Z,1510166039.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:59.498Z,1510166039.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:33:59.882Z,1510166039.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:33:59.903Z,1510166039.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:00.287Z,1510166040.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:00.304Z,1510166040.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:00.685Z,1510166040.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:00.701Z,1510166040.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:01.068Z,1510166041.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:01.104Z,1510166041.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:01.467Z,1510166041.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:01.516Z,1510166041.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:01.885Z,1510166041.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:01.901Z,1510166041.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:02.288Z,1510166042.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:02.311Z,1510166042.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:02.687Z,1510166042.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:02.704Z,1510166042.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:03.064Z,1510166043.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:03.098Z,1510166043.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:03.467Z,1510166043.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:03.498Z,1510166043.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:03.884Z,1510166043.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:03.908Z,1510166043.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:04.285Z,1510166044.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:04.301Z,1510166044.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:04.682Z,1510166044.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:04.704Z,1510166044.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:05.069Z,1510166045.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:05.101Z,1510166045.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:05.463Z,1510166045.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:05.479Z,1510166045.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:05.878Z,1510166045.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:05.910Z,1510166045.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:06.288Z,1510166046.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:06.328Z,1510166046.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:06.681Z,1510166046.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:06.711Z,1510166046.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:07.068Z,1510166047.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:07.084Z,1510166047.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:07.469Z,1510166047.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:07.485Z,1510166047.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:07.866Z,1510166047.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:07.882Z,1510166047.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:08.282Z,1510166048.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:08.306Z,1510166048.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:08.685Z,1510166048.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:08.716Z,1510166048.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:09.077Z,1510166049.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:09.109Z,1510166049.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:09.472Z,1510166049.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:09.488Z,1510166049.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:09.869Z,1510166049.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:09.900Z,1510166049.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:10.267Z,1510166050.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:10.287Z,1510166050.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:10.666Z,1510166050.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:10.684Z,1510166050.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:11.083Z,1510166051.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:11.113Z,1510166051.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:11.482Z,1510166051.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:11.513Z,1510166051.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:11.882Z,1510166051.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:11.913Z,1510166051.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:12.270Z,1510166052.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:12.287Z,1510166052.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:12.670Z,1510166052.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:12.686Z,1510166052.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:13.071Z,1510166053.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:13.088Z,1510166053.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:13.466Z,1510166053.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:13.542Z,1510166053.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:13.881Z,1510166053.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:13.913Z,1510166053.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:14.282Z,1510166054.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:14.328Z,1510166054.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:14.682Z,1510166054.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:14.712Z,1510166054.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:15.067Z,1510166055.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:15.113Z,1510166055.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:15.470Z,1510166055.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:15.487Z,1510166055.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:15.882Z,1510166055.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:15.912Z,1510166055.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:16.281Z,1510166056.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:16.313Z,1510166056.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:16.682Z,1510166056.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:16.713Z,1510166056.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:17.071Z,1510166057.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:17.092Z,1510166057.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:17.466Z,1510166057.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:17.482Z,1510166057.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:17.882Z,1510166057.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:17.914Z,1510166057.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:18.281Z,1510166058.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:18.314Z,1510166058.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:18.680Z,1510166058.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:18.696Z,1510166058.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:19.071Z,1510166059.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:19.092Z,1510166059.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:19.471Z,1510166059.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:19.487Z,1510166059.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:19.877Z,1510166059.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:19.893Z,1510166059.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:20.282Z,1510166060.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:20.298Z,1510166060.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:20.682Z,1510166060.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:20.698Z,1510166060.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:21.075Z,1510166061.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:21.091Z,1510166061.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:21.471Z,1510166061.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:21.492Z,1510166061.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:21.882Z,1510166061.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:21.898Z,1510166061.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:22.277Z,1510166062.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:22.299Z,1510166062.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:22.682Z,1510166062.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:22.698Z,1510166062.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:23.072Z,1510166063.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:23.088Z,1510166063.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:23.470Z,1510166063.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:23.522Z,1510166063.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:23.882Z,1510166063.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:23.899Z,1510166063.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:24.282Z,1510166064.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:24.299Z,1510166064.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:24.678Z,1510166064.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:24.694Z,1510166064.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:25.075Z,1510166065.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:25.092Z,1510166065.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:25.474Z,1510166065.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:25.491Z,1510166065.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:28.571Z,1510166068.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:28.587Z,1510166068.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:28.720Z,1510166068.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:28.768Z,1510166068.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:29.115Z,1510166069.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:29.132Z,1510166069.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:29.496Z,1510166069.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:29.529Z,1510166069.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:29.900Z,1510166069.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:29.925Z,1510166069.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:30.296Z,1510166070.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:30.321Z,1510166070.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:30.695Z,1510166070.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:30.721Z,1510166070.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:31.116Z,1510166071.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:31.132Z,1510166071.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:31.511Z,1510166071.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:31.527Z,1510166071.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:31.908Z,1510166071.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:31.930Z,1510166071.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:32.296Z,1510166072.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:32.321Z,1510166072.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:32.695Z,1510166072.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:32.728Z,1510166072.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:33.092Z,1510166073.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:33.119Z,1510166073.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:33.495Z,1510166073.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:33.528Z,1510166073.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:33.906Z,1510166073.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:33.936Z,1510166073.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:34.318Z,1510166074.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:34.334Z,1510166074.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:34.717Z,1510166074.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:34.733Z,1510166074.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:35.100Z,1510166075.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:35.156Z,1510166075.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:35.496Z,1510166075.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:35.557Z,1510166075.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:35.902Z,1510166075.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:35.935Z,1510166075.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:36.316Z,1510166076.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:36.382Z,1510166076.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:36.708Z,1510166076.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:36.734Z,1510166076.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:37.097Z,1510166077.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:37.143Z,1510166077.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:37.495Z,1510166077.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:37.534Z,1510166077.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:37.906Z,1510166077.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:37.942Z,1510166077.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:38.316Z,1510166078.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:38.333Z,1510166078.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:38.706Z,1510166078.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:38.736Z,1510166078.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:39.096Z,1510166079.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:39.134Z,1510166079.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:39.496Z,1510166079.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:39.528Z,1510166079.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:39.906Z,1510166079.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:39.933Z,1510166079.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:40.305Z,1510166080.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:40.333Z,1510166080.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:40.702Z,1510166080.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:40.730Z,1510166080.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:41.100Z,1510166081.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:41.138Z,1510166081.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:41.495Z,1510166081.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:41.511Z,1510166081.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:41.902Z,1510166081.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:41.930Z,1510166081.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:42.313Z,1510166082.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:42.340Z,1510166082.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:42.713Z,1510166082.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:42.740Z,1510166082.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:43.101Z,1510166083.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:43.117Z,1510166083.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:43.498Z,1510166083.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:43.515Z,1510166083.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:43.910Z,1510166083.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:43.941Z,1510166083.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:44.306Z,1510166084.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:44.338Z,1510166084.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:44.710Z,1510166084.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:44.744Z,1510166084.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:45.099Z,1510166085.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:45.115Z,1510166085.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:45.498Z,1510166085.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:45.552Z,1510166085.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:45.909Z,1510166085.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:45.946Z,1510166085.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:46.309Z,1510166086.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:46.325Z,1510166086.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:46.710Z,1510166086.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:46.726Z,1510166086.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:47.099Z,1510166087.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:47.120Z,1510166087.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:47.498Z,1510166087.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:47.514Z,1510166087.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:47.902Z,1510166087.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:47.918Z,1510166087.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:48.309Z,1510166088.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:48.326Z,1510166088.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:48.709Z,1510166088.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:48.725Z,1510166088.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:49.102Z,1510166089.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:49.118Z,1510166089.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:49.501Z,1510166089.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:49.517Z,1510166089.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:49.909Z,1510166089.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:49.925Z,1510166089.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:50.313Z,1510166090.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:50.330Z,1510166090.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:50.710Z,1510166090.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:50.726Z,1510166090.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:51.100Z,1510166091.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:51.119Z,1510166091.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:51.498Z,1510166091.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:51.514Z,1510166091.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:51.906Z,1510166091.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:51.923Z,1510166091.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:52.310Z,1510166092.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:52.326Z,1510166092.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:52.710Z,1510166092.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:52.726Z,1510166092.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:53.100Z,1510166093.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:53.118Z,1510166093.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:53.501Z,1510166093.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:53.518Z,1510166093.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:53.911Z,1510166093.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:53.927Z,1510166093.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:54.310Z,1510166094.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:54.332Z,1510166094.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:54.709Z,1510166094.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:54.731Z,1510166094.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:55.102Z,1510166095.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:55.118Z,1510166095.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:55.500Z,1510166095.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:55.517Z,1510166095.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:55.909Z,1510166095.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:55.932Z,1510166095.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:56.306Z,1510166096.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:56.327Z,1510166096.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:56.706Z,1510166096.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:56.728Z,1510166096.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:57.102Z,1510166097.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:57.118Z,1510166097.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:57.495Z,1510166097.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:57.583Z,1510166097.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:57.910Z,1510166097.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:57.926Z,1510166097.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:58.311Z,1510166098.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:58.359Z,1510166098.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:58.707Z,1510166098.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:58.731Z,1510166098.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:59.102Z,1510166099.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:59.163Z,1510166099.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:59.502Z,1510166099.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:59.518Z,1510166099.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:34:59.910Z,1510166099.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:34:59.926Z,1510166099.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:00.310Z,1510166100.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:00.332Z,1510166100.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:00.711Z,1510166100.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:00.731Z,1510166100.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:01.102Z,1510166101.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:01.118Z,1510166101.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:01.499Z,1510166101.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:01.520Z,1510166101.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:01.911Z,1510166101.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:01.927Z,1510166101.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:02.311Z,1510166102.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:02.332Z,1510166102.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:02.711Z,1510166102.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:02.727Z,1510166102.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:03.103Z,1510166103.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:03.119Z,1510166103.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:03.505Z,1510166103.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:03.522Z,1510166103.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:03.911Z,1510166103.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:03.932Z,1510166103.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:04.311Z,1510166104.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:04.327Z,1510166104.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:04.705Z,1510166104.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:04.735Z,1510166104.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:05.099Z,1510166105.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:05.121Z,1510166105.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:05.503Z,1510166105.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:05.518Z,1510166105.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:05.908Z,1510166105.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:05.924Z,1510166105.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:06.311Z,1510166106.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:06.331Z,1510166106.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:06.711Z,1510166106.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:06.726Z,1510166106.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:07.102Z,1510166107.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:07.120Z,1510166107.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:07.499Z,1510166107.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:07.559Z,1510166107.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:07.911Z,1510166107.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:07.928Z,1510166107.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:08.310Z,1510166108.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:08.332Z,1510166108.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:08.710Z,1510166108.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:08.726Z,1510166108.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:09.102Z,1510166109.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:09.118Z,1510166109.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:09.500Z,1510166109.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:09.517Z,1510166109.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:09.910Z,1510166109.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:09.932Z,1510166109.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:10.310Z,1510166110.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:10.326Z,1510166110.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:10.707Z,1510166110.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:10.724Z,1510166110.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:11.102Z,1510166111.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:11.118Z,1510166111.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:11.497Z,1510166111.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:11.519Z,1510166111.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:11.911Z,1510166111.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:11.928Z,1510166111.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:12.309Z,1510166112.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:12.326Z,1510166112.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:12.711Z,1510166112.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:12.727Z,1510166112.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:13.103Z,1510166113.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:13.119Z,1510166113.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:13.499Z,1510166113.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:13.521Z,1510166113.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:13.911Z,1510166113.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:13.927Z,1510166113.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:14.311Z,1510166114.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:14.332Z,1510166114.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:14.711Z,1510166114.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:14.732Z,1510166114.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:15.104Z,1510166115.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:15.127Z,1510166115.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:15.503Z,1510166115.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:15.519Z,1510166115.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:15.911Z,1510166115.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:15.932Z,1510166115.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:16.311Z,1510166116.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:16.327Z,1510166116.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:16.711Z,1510166116.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:16.732Z,1510166116.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:17.103Z,1510166117.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:17.119Z,1510166117.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:17.502Z,1510166117.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:17.519Z,1510166117.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:17.911Z,1510166117.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:17.927Z,1510166117.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:18.310Z,1510166118.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:18.332Z,1510166118.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:18.711Z,1510166118.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:18.727Z,1510166118.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:19.097Z,1510166119.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:19.117Z,1510166119.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:19.499Z,1510166119.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:19.579Z,1510166119.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:19.915Z,1510166119.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:19.979Z,1510166119.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:20.311Z,1510166120.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:20.328Z,1510166120.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:20.714Z,1510166120.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:20.731Z,1510166120.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:21.103Z,1510166121.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:21.157Z,1510166121.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:21.495Z,1510166121.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:21.527Z,1510166121.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:21.915Z,1510166121.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:21.967Z,1510166121.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:22.315Z,1510166122.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:22.331Z,1510166122.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:22.706Z,1510166122.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:22.727Z,1510166122.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:23.104Z,1510166123.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:23.121Z,1510166123.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:23.495Z,1510166123.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:23.520Z,1510166123.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:23.907Z,1510166123.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:23.931Z,1510166123.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:24.315Z,1510166124.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:24.332Z,1510166124.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:24.717Z,1510166124.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:24.733Z,1510166124.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:25.104Z,1510166125.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:25.120Z,1510166125.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:25.497Z,1510166125.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:25.546Z,1510166125.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:28.736Z,1510166128.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:28.753Z,1510166128.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:28.906Z,1510166128.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:28.933Z,1510166128.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:29.320Z,1510166129.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:29.336Z,1510166129.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:29.695Z,1510166129.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:29.711Z,1510166129.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:30.096Z,1510166130.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:30.143Z,1510166130.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:30.495Z,1510166130.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:30.511Z,1510166130.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:30.905Z,1510166130.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:30.939Z,1510166130.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:31.309Z,1510166131.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:31.336Z,1510166131.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:31.706Z,1510166131.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:31.738Z,1510166131.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:32.100Z,1510166132.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:32.116Z,1510166132.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:32.492Z,1510166132.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:32.508Z,1510166132.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:32.906Z,1510166132.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:32.938Z,1510166132.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:33.309Z,1510166133.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:33.337Z,1510166133.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:33.702Z,1510166133.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:33.734Z,1510166133.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:34.098Z,1510166134.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:34.129Z,1510166134.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:34.499Z,1510166134.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:34.519Z,1510166134.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:34.906Z,1510166134.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:34.939Z,1510166134.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:35.310Z,1510166135.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:35.342Z,1510166135.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:35.711Z,1510166135.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:35.727Z,1510166135.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:36.097Z,1510166136.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:36.114Z,1510166136.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:36.498Z,1510166136.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:36.515Z,1510166136.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:36.905Z,1510166136.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:36.922Z,1510166136.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:37.306Z,1510166137.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:37.322Z,1510166137.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:37.710Z,1510166137.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:37.726Z,1510166137.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:38.102Z,1510166138.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:38.118Z,1510166138.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:38.495Z,1510166138.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:38.525Z,1510166138.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:38.906Z,1510166138.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:38.922Z,1510166138.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:39.309Z,1510166139.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:39.352Z,1510166139.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:39.706Z,1510166139.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:39.722Z,1510166139.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:40.095Z,1510166140.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:40.126Z,1510166140.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:40.501Z,1510166140.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:40.517Z,1510166140.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:40.906Z,1510166140.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:40.922Z,1510166140.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:41.310Z,1510166141.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:41.326Z,1510166141.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:41.710Z,1510166141.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:41.748Z,1510166141.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:42.099Z,1510166142.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:42.163Z,1510166142.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:42.501Z,1510166142.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:42.562Z,1510166142.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:42.907Z,1510166142.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:42.927Z,1510166142.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:43.310Z,1510166143.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:43.359Z,1510166143.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:43.706Z,1510166143.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:43.723Z,1510166143.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:44.103Z,1510166144.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:44.152Z,1510166144.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:44.506Z,1510166144.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:44.523Z,1510166144.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:44.910Z,1510166144.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:44.927Z,1510166144.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:45.310Z,1510166145.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:45.326Z,1510166145.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:45.707Z,1510166145.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:45.724Z,1510166145.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:46.109Z,1510166146.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:46.125Z,1510166146.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:46.501Z,1510166146.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:46.517Z,1510166146.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:46.911Z,1510166146.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:46.927Z,1510166146.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:47.317Z,1510166147.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:47.333Z,1510166147.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:47.719Z,1510166147.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:47.734Z,1510166147.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:48.091Z,1510166148.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:48.126Z,1510166148.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:48.495Z,1510166148.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:48.527Z,1510166148.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:48.891Z,1510166148.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:48.922Z,1510166148.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:49.300Z,1510166149.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:49.325Z,1510166149.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:49.696Z,1510166149.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:49.721Z,1510166149.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:50.117Z,1510166150.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:50.132Z,1510166150.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:50.518Z,1510166150.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:50.539Z,1510166150.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:50.910Z,1510166150.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:50.940Z,1510166150.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:51.296Z,1510166151.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:51.333Z,1510166151.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:51.700Z,1510166151.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:51.727Z,1510166151.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:52.096Z,1510166152.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:52.130Z,1510166152.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:52.491Z,1510166152.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:52.537Z,1510166152.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:52.914Z,1510166152.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:52.930Z,1510166152.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:53.316Z,1510166153.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:53.333Z,1510166153.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:53.712Z,1510166153.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:53.740Z,1510166153.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:54.096Z,1510166154.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:54.127Z,1510166154.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:54.496Z,1510166154.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:54.534Z,1510166154.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:54.917Z,1510166154.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:54.933Z,1510166154.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:55.310Z,1510166155.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:55.332Z,1510166155.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:55.712Z,1510166155.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:55.728Z,1510166155.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:56.097Z,1510166156.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:56.127Z,1510166156.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:56.495Z,1510166156.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:56.526Z,1510166156.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:56.912Z,1510166156.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:56.928Z,1510166156.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:57.316Z,1510166157.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:57.339Z,1510166157.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:57.702Z,1510166157.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:57.734Z,1510166157.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:58.096Z,1510166158.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:58.126Z,1510166158.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:58.496Z,1510166158.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:58.526Z,1510166158.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:58.902Z,1510166158.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:58.934Z,1510166158.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:59.315Z,1510166159.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:59.332Z,1510166159.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:35:59.717Z,1510166159.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:35:59.733Z,1510166159.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:00.095Z,1510166160.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:00.127Z,1510166160.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:00.499Z,1510166160.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:00.531Z,1510166160.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:00.917Z,1510166160.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:00.933Z,1510166160.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:01.316Z,1510166161.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:01.332Z,1510166161.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:01.706Z,1510166161.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:01.738Z,1510166161.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:02.098Z,1510166162.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:02.128Z,1510166162.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:02.496Z,1510166162.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:02.512Z,1510166162.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:02.906Z,1510166162.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:02.942Z,1510166162.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:03.310Z,1510166163.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:03.337Z,1510166163.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:03.712Z,1510166163.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:03.738Z,1510166163.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:04.096Z,1510166164.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:04.114Z,1510166164.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:04.495Z,1510166164.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:04.575Z,1510166164.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:04.902Z,1510166164.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:04.923Z,1510166164.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:05.309Z,1510166165.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:05.355Z,1510166165.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:05.710Z,1510166165.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:05.726Z,1510166165.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:06.102Z,1510166166.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:06.155Z,1510166166.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:06.500Z,1510166166.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:06.516Z,1510166166.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:06.910Z,1510166166.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:06.926Z,1510166166.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:07.310Z,1510166167.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:07.326Z,1510166167.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:07.706Z,1510166167.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:07.722Z,1510166167.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:08.102Z,1510166168.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:08.120Z,1510166168.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:08.494Z,1510166168.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:08.523Z,1510166168.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:08.903Z,1510166168.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:08.924Z,1510166168.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:09.310Z,1510166169.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:09.326Z,1510166169.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:09.706Z,1510166169.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:09.722Z,1510166169.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:10.100Z,1510166170.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:10.129Z,1510166170.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:10.503Z,1510166170.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:10.519Z,1510166170.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:10.907Z,1510166170.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:10.928Z,1510166170.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:11.314Z,1510166171.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:11.330Z,1510166171.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:11.707Z,1510166171.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:11.728Z,1510166171.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:12.097Z,1510166172.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:12.118Z,1510166172.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:12.499Z,1510166172.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:12.530Z,1510166172.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:12.908Z,1510166172.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:12.925Z,1510166172.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:13.307Z,1510166173.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:13.328Z,1510166173.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:13.707Z,1510166173.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:13.728Z,1510166173.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:14.099Z,1510166174.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:14.116Z,1510166174.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:14.503Z,1510166174.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:14.563Z,1510166174.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:14.906Z,1510166174.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:14.927Z,1510166174.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:15.307Z,1510166175.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:15.328Z,1510166175.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:15.706Z,1510166175.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:15.724Z,1510166175.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:16.102Z,1510166176.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:16.118Z,1510166176.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:16.512Z,1510166176.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:16.529Z,1510166176.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:16.915Z,1510166176.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:16.931Z,1510166176.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:17.314Z,1510166177.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:17.330Z,1510166177.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:17.712Z,1510166177.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:17.728Z,1510166177.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:18.092Z,1510166178.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:18.126Z,1510166178.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:18.495Z,1510166178.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:18.544Z,1510166178.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:18.913Z,1510166178.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:18.929Z,1510166178.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:19.312Z,1510166179.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:19.329Z,1510166179.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:19.710Z,1510166179.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:19.731Z,1510166179.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:20.092Z,1510166180.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:20.130Z,1510166180.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:20.491Z,1510166180.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:20.523Z,1510166180.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:20.912Z,1510166180.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:20.935Z,1510166180.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:21.312Z,1510166181.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:21.328Z,1510166181.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:21.710Z,1510166181.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:21.740Z,1510166181.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:22.092Z,1510166182.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:22.126Z,1510166182.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:22.491Z,1510166182.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:22.526Z,1510166182.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:22.912Z,1510166182.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:22.929Z,1510166182.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:23.316Z,1510166183.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:23.332Z,1510166183.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:23.711Z,1510166183.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:23.731Z,1510166183.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:24.096Z,1510166184.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:24.131Z,1510166184.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:24.496Z,1510166184.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:24.530Z,1510166184.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:24.917Z,1510166184.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:24.933Z,1510166184.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:25.316Z,1510166185.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:25.333Z,1510166185.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:25.336Z,1510166185.336 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T18:31:25.3Z
2017-11-08T18:36:25.336Z,1510166185.336 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T18:36:25.336Z,1510166185.336 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T18:36:25.717Z,1510166185.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:25.733Z,1510166185.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:29.074Z,1510166189.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:29.167Z,1510166189.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:29.272Z,1510166189.272 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171108T132236/Courier0072.lzma
2017-11-08T18:36:29.294Z,1510166189.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:29.330Z,1510166189.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:29.686Z,1510166189.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:29.736Z,1510166189.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:30.053Z,1510166190.053 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0072.lzma.bak
2017-11-08T18:36:30.054Z,1510166190.054 [DataOverHttps](INFO): SBD MOMSN=5223232
2017-11-08T18:36:30.091Z,1510166190.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:30.107Z,1510166190.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:31.033Z,1510166191.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:31.084Z,1510166191.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:31.202Z,1510166191.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:31.244Z,1510166191.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:34.288Z,1510166194.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:34.304Z,1510166194.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:34.439Z,1510166194.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:34.455Z,1510166194.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:34.850Z,1510166194.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:34.896Z,1510166194.896 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:34.896Z,1510166194.896 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 104
2017-11-08T18:36:34.896Z,1510166194.896 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T18:36:34.898Z,1510166194.898 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:34.898Z,1510166194.898 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 104
2017-11-08T18:36:34.898Z,1510166194.898 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T18:36:34.900Z,1510166194.900 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:34.901Z,1510166194.901 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 104
2017-11-08T18:36:34.901Z,1510166194.901 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T18:36:34.989Z,1510166194.989 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T18:36:34.989Z,1510166194.989 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T18:36:34.990Z,1510166194.990 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T18:36:35.253Z,1510166195.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:35.373Z,1510166195.373 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T18:36:35.373Z,1510166195.373 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 104
2017-11-08T18:36:35.374Z,1510166195.374 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T18:36:35.374Z,1510166195.374 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 104
2017-11-08T18:36:35.374Z,1510166195.374 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T18:36:35.375Z,1510166195.375 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 104
2017-11-08T18:36:35.646Z,1510166195.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:35.662Z,1510166195.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T18:36:35.662Z,1510166195.662 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:36:35.663Z,1510166195.663 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:36:35.663Z,1510166195.663 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T18:36:35.663Z,1510166195.663 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:36:35.664Z,1510166195.664 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:36:35.664Z,1510166195.664 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T18:36:35.665Z,1510166195.665 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:36:35.665Z,1510166195.665 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:36:36.043Z,1510166196.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:36.059Z,1510166196.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T18:36:36.060Z,1510166196.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:39.116Z,1510166199.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:39.165Z,1510166199.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2017-11-08T18:36:39.166Z,1510166199.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:39.281Z,1510166199.281 [DataOverHttps](INFO): Sending 220 bytes from file Logs/20171108T132236/Express0073.lzma
2017-11-08T18:36:39.304Z,1510166199.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:39.320Z,1510166199.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T18:36:39.333Z,1510166199.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:39.714Z,1510166199.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:39.744Z,1510166199.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-08T18:36:39.745Z,1510166199.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:40.073Z,1510166200.073 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0073.lzma.bak
2017-11-08T18:36:40.074Z,1510166200.074 [DataOverHttps](INFO): SBD MOMSN=5223234
2017-11-08T18:36:40.121Z,1510166200.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:40.144Z,1510166200.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-08T18:36:40.145Z,1510166200.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:41.083Z,1510166201.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:41.099Z,1510166201.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-11-08T18:36:41.100Z,1510166201.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:41.104Z,1510166201.104 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T18:36:41.104Z,1510166201.104 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T18:36:41.104Z,1510166201.104 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T18:36:41.208Z,1510166201.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:41.250Z,1510166201.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T18:36:41.251Z,1510166201.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:41.618Z,1510166201.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:41.645Z,1510166201.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T18:36:41.646Z,1510166201.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:44.704Z,1510166204.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:44.720Z,1510166204.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2017-11-08T18:36:44.721Z,1510166204.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:44.863Z,1510166204.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:44.895Z,1510166204.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T18:36:44.896Z,1510166204.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:45.285Z,1510166205.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:45.300Z,1510166205.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T18:36:45.301Z,1510166205.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:45.669Z,1510166205.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:45.700Z,1510166205.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T18:36:45.701Z,1510166205.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:46.080Z,1510166206.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:46.096Z,1510166206.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T18:36:46.097Z,1510166206.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:46.456Z,1510166206.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:46.494Z,1510166206.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T18:36:46.495Z,1510166206.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:46.860Z,1510166206.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:46.888Z,1510166206.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T18:36:46.893Z,1510166206.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:47.261Z,1510166207.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:47.293Z,1510166207.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T18:36:47.294Z,1510166207.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:47.660Z,1510166207.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:47.705Z,1510166207.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T18:36:47.706Z,1510166207.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:48.074Z,1510166208.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:48.100Z,1510166208.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T18:36:48.101Z,1510166208.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:48.474Z,1510166208.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:48.499Z,1510166208.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T18:36:48.501Z,1510166208.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:48.866Z,1510166208.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:48.901Z,1510166208.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T18:36:48.902Z,1510166208.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:49.256Z,1510166209.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:49.378Z,1510166209.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T18:36:49.380Z,1510166209.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:49.657Z,1510166209.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:49.711Z,1510166209.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T18:36:49.714Z,1510166209.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:50.061Z,1510166210.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:50.107Z,1510166210.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T18:36:50.108Z,1510166210.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:50.459Z,1510166210.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:50.479Z,1510166210.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T18:36:50.480Z,1510166210.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:50.876Z,1510166210.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:50.931Z,1510166210.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T18:36:50.932Z,1510166210.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:51.279Z,1510166211.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:51.333Z,1510166211.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T18:36:51.334Z,1510166211.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:51.672Z,1510166211.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:51.692Z,1510166211.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T18:36:51.713Z,1510166211.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:52.074Z,1510166212.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:52.156Z,1510166212.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T18:36:52.161Z,1510166212.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:52.466Z,1510166212.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:52.487Z,1510166212.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T18:36:52.488Z,1510166212.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:52.870Z,1510166212.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:52.926Z,1510166212.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T18:36:52.927Z,1510166212.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:53.280Z,1510166213.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:53.296Z,1510166213.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T18:36:53.297Z,1510166213.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:53.680Z,1510166213.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:53.695Z,1510166213.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T18:36:53.696Z,1510166213.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:54.056Z,1510166214.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:54.093Z,1510166214.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T18:36:54.094Z,1510166214.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:54.459Z,1510166214.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:54.493Z,1510166214.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T18:36:54.494Z,1510166214.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:54.869Z,1510166214.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:54.902Z,1510166214.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:55.280Z,1510166215.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:55.296Z,1510166215.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:55.670Z,1510166215.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:55.702Z,1510166215.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:56.060Z,1510166216.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:56.095Z,1510166216.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:56.459Z,1510166216.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:56.492Z,1510166216.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:56.870Z,1510166216.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:56.895Z,1510166216.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:57.273Z,1510166217.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:57.303Z,1510166217.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:57.666Z,1510166217.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:57.698Z,1510166217.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:58.060Z,1510166218.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:58.076Z,1510166218.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:58.455Z,1510166218.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:58.471Z,1510166218.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:58.866Z,1510166218.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:58.898Z,1510166218.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:59.273Z,1510166219.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:59.303Z,1510166219.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:36:59.669Z,1510166219.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:36:59.697Z,1510166219.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:00.056Z,1510166220.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:00.099Z,1510166220.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:00.459Z,1510166220.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:00.480Z,1510166220.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:00.878Z,1510166220.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:00.903Z,1510166220.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:01.277Z,1510166221.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:01.332Z,1510166221.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:01.670Z,1510166221.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:01.701Z,1510166221.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:02.060Z,1510166222.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:02.079Z,1510166222.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:02.464Z,1510166222.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:02.480Z,1510166222.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:02.874Z,1510166222.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:02.905Z,1510166222.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:03.277Z,1510166223.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:03.304Z,1510166223.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:03.674Z,1510166223.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:03.709Z,1510166223.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:04.060Z,1510166224.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:04.093Z,1510166224.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:04.462Z,1510166224.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:04.478Z,1510166224.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:04.870Z,1510166224.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:04.903Z,1510166224.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:05.274Z,1510166225.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:05.306Z,1510166225.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:05.669Z,1510166225.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:05.691Z,1510166225.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:06.063Z,1510166226.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:06.084Z,1510166226.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:06.462Z,1510166226.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:06.478Z,1510166226.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:06.873Z,1510166226.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:06.890Z,1510166226.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:07.274Z,1510166227.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:07.290Z,1510166227.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:07.682Z,1510166227.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:07.720Z,1510166227.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:08.066Z,1510166228.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:08.082Z,1510166228.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:08.467Z,1510166228.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:08.488Z,1510166228.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:08.874Z,1510166228.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:08.890Z,1510166228.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:09.273Z,1510166229.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:09.296Z,1510166229.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:09.674Z,1510166229.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:09.690Z,1510166229.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:10.066Z,1510166230.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:10.083Z,1510166230.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:10.466Z,1510166230.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:10.487Z,1510166230.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:10.871Z,1510166230.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:10.891Z,1510166230.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:11.274Z,1510166231.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:11.290Z,1510166231.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:11.673Z,1510166231.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:11.689Z,1510166231.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:12.063Z,1510166232.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:12.084Z,1510166232.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:12.465Z,1510166232.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:12.481Z,1510166232.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:12.873Z,1510166232.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:12.890Z,1510166232.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:13.270Z,1510166233.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:13.354Z,1510166233.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:13.677Z,1510166233.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:13.719Z,1510166233.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:14.065Z,1510166234.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:14.104Z,1510166234.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:14.462Z,1510166234.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:14.484Z,1510166234.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:14.875Z,1510166234.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:14.927Z,1510166234.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:15.275Z,1510166235.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:15.299Z,1510166235.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:15.673Z,1510166235.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:15.689Z,1510166235.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:16.066Z,1510166236.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:16.083Z,1510166236.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:16.466Z,1510166236.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:16.487Z,1510166236.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:16.876Z,1510166236.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:16.893Z,1510166236.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:17.279Z,1510166237.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:17.300Z,1510166237.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:17.676Z,1510166237.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:17.692Z,1510166237.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:18.056Z,1510166238.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:18.091Z,1510166238.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:18.466Z,1510166238.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:18.482Z,1510166238.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:18.876Z,1510166238.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:18.893Z,1510166238.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:19.280Z,1510166239.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:19.297Z,1510166239.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:19.676Z,1510166239.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:19.692Z,1510166239.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:20.056Z,1510166240.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:20.086Z,1510166240.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:20.469Z,1510166240.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:20.491Z,1510166240.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:20.876Z,1510166240.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:20.892Z,1510166240.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:21.286Z,1510166241.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:21.325Z,1510166241.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:21.678Z,1510166241.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:21.700Z,1510166241.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:22.067Z,1510166242.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:22.088Z,1510166242.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:22.466Z,1510166242.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:22.487Z,1510166242.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:22.877Z,1510166242.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:22.893Z,1510166242.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:23.279Z,1510166243.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:23.339Z,1510166243.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:23.679Z,1510166243.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:23.707Z,1510166243.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:24.059Z,1510166244.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:24.118Z,1510166244.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:24.459Z,1510166244.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:24.477Z,1510166244.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:24.897Z,1510166244.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:24.916Z,1510166244.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:25.279Z,1510166245.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:25.314Z,1510166245.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:25.674Z,1510166245.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:25.708Z,1510166245.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:26.063Z,1510166246.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:26.079Z,1510166246.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:26.462Z,1510166246.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:26.483Z,1510166246.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:26.879Z,1510166246.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:26.917Z,1510166246.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:27.273Z,1510166247.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:27.289Z,1510166247.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:27.666Z,1510166247.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:27.687Z,1510166247.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:28.067Z,1510166248.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:28.088Z,1510166248.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:28.466Z,1510166248.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:28.482Z,1510166248.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:28.866Z,1510166248.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:28.888Z,1510166248.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:29.274Z,1510166249.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:29.290Z,1510166249.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:29.672Z,1510166249.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:29.688Z,1510166249.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:30.066Z,1510166250.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:30.082Z,1510166250.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:30.468Z,1510166250.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:30.486Z,1510166250.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:30.873Z,1510166250.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:30.895Z,1510166250.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:31.274Z,1510166251.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:31.290Z,1510166251.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:31.670Z,1510166251.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:31.692Z,1510166251.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:32.067Z,1510166252.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:32.087Z,1510166252.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:32.482Z,1510166252.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:32.498Z,1510166252.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:32.876Z,1510166252.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:32.895Z,1510166252.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:33.280Z,1510166253.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:33.303Z,1510166253.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:33.674Z,1510166253.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:33.698Z,1510166253.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:34.075Z,1510166254.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:34.091Z,1510166254.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:34.455Z,1510166254.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:34.493Z,1510166254.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:34.876Z,1510166254.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:34.936Z,1510166254.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:35.279Z,1510166255.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:35.320Z,1510166255.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:35.429Z,1510166255.429 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:37:35.429Z,1510166255.429 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T18:37:35.649Z,1510166255.649 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:37:35.649Z,1510166255.649 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:37:35.649Z,1510166255.649 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:37:35.649Z,1510166255.649 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T18:37:35.649Z,1510166255.649 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:37:35.670Z,1510166255.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:35.726Z,1510166255.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:35.817Z,1510166255.817 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:37:36.053Z,1510166256.053 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:37:36.094Z,1510166256.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:36.184Z,1510166256.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:36.273Z,1510166256.273 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:37:36.463Z,1510166256.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:36.520Z,1510166256.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:36.874Z,1510166256.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:36.896Z,1510166256.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:37.270Z,1510166257.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:37.316Z,1510166257.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:37.674Z,1510166257.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:37.697Z,1510166257.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:37.785Z,1510166257.785 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:37:37.785Z,1510166257.785 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T18:37:37.889Z,1510166257.889 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:37:37.889Z,1510166257.889 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:37:37.889Z,1510166257.889 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:37:37.889Z,1510166257.889 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T18:37:37.889Z,1510166257.889 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:37:38.063Z,1510166258.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:38.103Z,1510166258.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:38.189Z,1510166258.189 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:37:38.293Z,1510166258.293 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:37:38.376Z,1510166258.376 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:37:38.464Z,1510166258.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:38.499Z,1510166258.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:38.878Z,1510166258.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:38.903Z,1510166258.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:39.277Z,1510166259.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:39.312Z,1510166259.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:39.670Z,1510166259.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:39.702Z,1510166259.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:39.785Z,1510166259.785 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:37:39.785Z,1510166259.785 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T18:37:39.993Z,1510166259.993 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:37:39.994Z,1510166259.994 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:37:39.994Z,1510166259.994 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:37:39.994Z,1510166259.994 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T18:37:39.994Z,1510166259.994 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:37:40.081Z,1510166260.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:40.109Z,1510166260.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:40.193Z,1510166260.193 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:37:40.398Z,1510166260.398 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:37:40.475Z,1510166260.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:40.539Z,1510166260.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:40.587Z,1510166260.587 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:37:40.874Z,1510166260.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:40.891Z,1510166260.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:41.278Z,1510166261.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:41.294Z,1510166261.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:41.681Z,1510166261.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:41.714Z,1510166261.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:41.805Z,1510166261.805 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:37:41.805Z,1510166261.805 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T18:37:42.201Z,1510166262.201 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:37:42.201Z,1510166262.201 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:37:42.201Z,1510166262.201 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:37:42.202Z,1510166262.202 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T18:37:42.202Z,1510166262.202 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:37:42.605Z,1510166262.605 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:37:42.744Z,1510166262.744 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:37:45.073Z,1510166265.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:45.092Z,1510166265.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:45.201Z,1510166265.201 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:37:45.202Z,1510166265.202 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:37:45.202Z,1510166265.202 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T18:37:45.235Z,1510166265.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:45.308Z,1510166265.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:45.573Z,1510166265.573 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:37:45.573Z,1510166265.573 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:37:45.573Z,1510166265.573 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:37:45.574Z,1510166265.574 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T18:37:45.574Z,1510166265.574 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:37:45.671Z,1510166265.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:45.727Z,1510166265.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:45.817Z,1510166265.817 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:37:45.817Z,1510166265.817 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:37:45.977Z,1510166265.977 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:37:46.118Z,1510166266.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:46.205Z,1510166266.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:46.288Z,1510166266.288 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:37:46.444Z,1510166266.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:46.461Z,1510166266.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:46.841Z,1510166266.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:46.866Z,1510166266.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:47.239Z,1510166267.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:47.268Z,1510166267.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:47.633Z,1510166267.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:47.678Z,1510166267.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:48.074Z,1510166268.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:48.096Z,1510166268.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:48.449Z,1510166268.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:48.474Z,1510166268.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:48.854Z,1510166268.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:48.870Z,1510166268.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:49.243Z,1510166269.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:49.264Z,1510166269.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:49.630Z,1510166269.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:49.654Z,1510166269.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:50.035Z,1510166270.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:50.057Z,1510166270.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:50.440Z,1510166270.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:50.463Z,1510166270.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:50.830Z,1510166270.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:50.862Z,1510166270.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:51.249Z,1510166271.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:51.266Z,1510166271.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:51.647Z,1510166271.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:51.663Z,1510166271.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:52.047Z,1510166272.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:52.068Z,1510166272.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:52.445Z,1510166272.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:52.463Z,1510166272.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:52.840Z,1510166272.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:52.861Z,1510166272.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:53.246Z,1510166273.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:53.263Z,1510166273.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:53.647Z,1510166273.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:53.665Z,1510166273.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:54.047Z,1510166274.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:54.064Z,1510166274.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:54.450Z,1510166274.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:54.467Z,1510166274.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:54.846Z,1510166274.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:54.863Z,1510166274.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:55.242Z,1510166275.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:55.258Z,1510166275.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:55.647Z,1510166275.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:55.672Z,1510166275.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:56.038Z,1510166276.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:56.055Z,1510166276.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:56.443Z,1510166276.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:56.462Z,1510166276.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:56.842Z,1510166276.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:56.858Z,1510166276.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:57.250Z,1510166277.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:57.266Z,1510166277.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:57.647Z,1510166277.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:57.746Z,1510166277.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:58.048Z,1510166278.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:58.064Z,1510166278.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:58.445Z,1510166278.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:58.507Z,1510166278.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:58.827Z,1510166278.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:58.873Z,1510166278.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:59.235Z,1510166279.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:59.288Z,1510166279.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:37:59.631Z,1510166279.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:37:59.664Z,1510166279.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:00.046Z,1510166280.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:00.080Z,1510166280.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:00.461Z,1510166280.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:00.478Z,1510166280.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:00.842Z,1510166280.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:00.868Z,1510166280.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:01.231Z,1510166281.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:01.267Z,1510166281.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:01.630Z,1510166281.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:01.647Z,1510166281.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:02.031Z,1510166282.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:02.052Z,1510166282.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:02.432Z,1510166282.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:02.448Z,1510166282.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:02.829Z,1510166282.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:02.852Z,1510166282.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:03.250Z,1510166283.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:03.275Z,1510166283.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:03.641Z,1510166283.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:03.670Z,1510166283.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:04.042Z,1510166284.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:04.057Z,1510166284.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:04.434Z,1510166284.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:04.450Z,1510166284.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:04.837Z,1510166284.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:04.858Z,1510166284.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:05.240Z,1510166285.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:05.257Z,1510166285.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:05.638Z,1510166285.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:05.654Z,1510166285.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:06.045Z,1510166286.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:06.061Z,1510166286.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:06.446Z,1510166286.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:06.463Z,1510166286.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:06.842Z,1510166286.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:06.858Z,1510166286.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:07.237Z,1510166287.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:07.259Z,1510166287.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:07.636Z,1510166287.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:07.692Z,1510166287.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:08.040Z,1510166288.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:08.057Z,1510166288.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:08.436Z,1510166288.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:08.452Z,1510166288.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:08.833Z,1510166288.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:08.849Z,1510166288.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:09.242Z,1510166289.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:09.258Z,1510166289.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:09.645Z,1510166289.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:09.661Z,1510166289.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:10.042Z,1510166290.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:10.086Z,1510166290.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:10.437Z,1510166290.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:10.453Z,1510166290.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:10.835Z,1510166290.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:10.855Z,1510166290.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:11.243Z,1510166291.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:11.259Z,1510166291.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:11.643Z,1510166291.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:11.659Z,1510166291.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:12.052Z,1510166292.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:12.068Z,1510166292.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:12.451Z,1510166292.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:12.472Z,1510166292.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:12.851Z,1510166292.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:12.868Z,1510166292.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:13.227Z,1510166293.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:13.253Z,1510166293.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:13.632Z,1510166293.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:13.659Z,1510166293.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:14.041Z,1510166294.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:14.057Z,1510166294.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:14.446Z,1510166294.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:14.467Z,1510166294.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:14.842Z,1510166294.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:14.858Z,1510166294.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:15.251Z,1510166295.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:15.275Z,1510166295.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:15.655Z,1510166295.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:15.679Z,1510166295.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:16.055Z,1510166296.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:16.080Z,1510166296.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:16.432Z,1510166296.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:16.480Z,1510166296.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:16.832Z,1510166296.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:16.872Z,1510166296.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:17.233Z,1510166297.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:17.259Z,1510166297.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:17.645Z,1510166297.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:17.670Z,1510166297.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:18.054Z,1510166298.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:18.078Z,1510166298.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:18.448Z,1510166298.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:18.498Z,1510166298.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:18.876Z,1510166298.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:18.902Z,1510166298.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:19.248Z,1510166299.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:19.298Z,1510166299.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:19.643Z,1510166299.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:19.725Z,1510166299.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:20.032Z,1510166300.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:20.051Z,1510166300.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:20.435Z,1510166300.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:20.498Z,1510166300.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:20.838Z,1510166300.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:20.855Z,1510166300.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:21.240Z,1510166301.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:21.295Z,1510166301.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:21.646Z,1510166301.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:21.662Z,1510166301.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:22.042Z,1510166302.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:22.095Z,1510166302.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:22.440Z,1510166302.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:22.456Z,1510166302.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:22.838Z,1510166302.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:22.854Z,1510166302.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:23.239Z,1510166303.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:23.255Z,1510166303.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:23.640Z,1510166303.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:23.656Z,1510166303.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:24.046Z,1510166304.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:24.062Z,1510166304.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:24.446Z,1510166304.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:24.462Z,1510166304.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:24.842Z,1510166304.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:24.863Z,1510166304.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:25.238Z,1510166305.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:25.254Z,1510166305.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:25.637Z,1510166305.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:25.653Z,1510166305.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:26.037Z,1510166306.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:26.053Z,1510166306.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:26.439Z,1510166306.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:26.455Z,1510166306.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:26.837Z,1510166306.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:26.860Z,1510166306.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:27.246Z,1510166307.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:27.262Z,1510166307.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:27.646Z,1510166307.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:27.662Z,1510166307.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:28.043Z,1510166308.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:28.064Z,1510166308.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:28.443Z,1510166308.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:28.459Z,1510166308.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:28.839Z,1510166308.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:28.855Z,1510166308.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:29.238Z,1510166309.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:29.254Z,1510166309.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:29.636Z,1510166309.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:29.665Z,1510166309.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:30.046Z,1510166310.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:30.068Z,1510166310.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:30.450Z,1510166310.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:30.496Z,1510166310.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:30.858Z,1510166310.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:30.888Z,1510166310.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:31.241Z,1510166311.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:31.258Z,1510166311.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:31.639Z,1510166311.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:31.657Z,1510166311.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:32.056Z,1510166312.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:32.106Z,1510166312.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:32.447Z,1510166312.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:32.496Z,1510166312.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:32.856Z,1510166312.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:32.882Z,1510166312.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:33.250Z,1510166313.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:33.347Z,1510166313.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:33.646Z,1510166313.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:33.679Z,1510166313.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:34.042Z,1510166314.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:34.078Z,1510166314.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:34.441Z,1510166314.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:34.458Z,1510166314.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:34.839Z,1510166314.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:34.856Z,1510166314.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:35.246Z,1510166315.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:35.262Z,1510166315.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:35.645Z,1510166315.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:35.662Z,1510166315.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:36.042Z,1510166316.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:36.059Z,1510166316.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:36.432Z,1510166316.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:36.453Z,1510166316.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:36.837Z,1510166316.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:36.854Z,1510166316.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:37.245Z,1510166317.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:37.261Z,1510166317.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:37.638Z,1510166317.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:37.656Z,1510166317.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:38.042Z,1510166318.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:38.064Z,1510166318.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:38.448Z,1510166318.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:38.465Z,1510166318.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:38.843Z,1510166318.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:38.860Z,1510166318.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:39.235Z,1510166319.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:39.268Z,1510166319.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:39.634Z,1510166319.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:39.655Z,1510166319.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:40.037Z,1510166320.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:40.054Z,1510166320.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:40.438Z,1510166320.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:40.454Z,1510166320.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:40.834Z,1510166320.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:40.855Z,1510166320.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:41.242Z,1510166321.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:41.264Z,1510166321.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:41.653Z,1510166321.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:41.697Z,1510166321.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:42.049Z,1510166322.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:42.066Z,1510166322.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:45.220Z,1510166325.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:45.304Z,1510166325.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:45.442Z,1510166325.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:45.487Z,1510166325.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:45.850Z,1510166325.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:45.867Z,1510166325.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:46.247Z,1510166326.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:46.296Z,1510166326.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:46.649Z,1510166326.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:46.666Z,1510166326.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:47.039Z,1510166327.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:47.099Z,1510166327.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:47.440Z,1510166327.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:47.456Z,1510166327.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:47.830Z,1510166327.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:47.861Z,1510166327.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:48.246Z,1510166328.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:48.267Z,1510166328.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:48.647Z,1510166328.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:48.668Z,1510166328.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:49.047Z,1510166329.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:49.063Z,1510166329.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:49.430Z,1510166329.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:49.462Z,1510166329.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:49.837Z,1510166329.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:49.860Z,1510166329.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:50.239Z,1510166330.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:50.256Z,1510166330.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:50.638Z,1510166330.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:50.658Z,1510166330.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:51.047Z,1510166331.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:51.064Z,1510166331.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:51.447Z,1510166331.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:51.464Z,1510166331.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:51.851Z,1510166331.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:51.868Z,1510166331.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:52.230Z,1510166332.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:52.261Z,1510166332.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:52.630Z,1510166332.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:52.663Z,1510166332.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:53.041Z,1510166333.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:53.057Z,1510166333.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:53.433Z,1510166333.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:53.487Z,1510166333.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:53.841Z,1510166333.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:53.857Z,1510166333.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:54.255Z,1510166334.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:54.279Z,1510166334.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:54.656Z,1510166334.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:54.688Z,1510166334.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:55.053Z,1510166335.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:55.084Z,1510166335.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:55.433Z,1510166335.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:55.486Z,1510166335.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:55.857Z,1510166335.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:55.886Z,1510166335.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:56.241Z,1510166336.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:56.268Z,1510166336.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:56.647Z,1510166336.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:56.692Z,1510166336.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:57.047Z,1510166337.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:57.064Z,1510166337.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:57.446Z,1510166337.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:57.464Z,1510166337.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:57.847Z,1510166337.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:57.863Z,1510166337.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:58.234Z,1510166338.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:58.254Z,1510166338.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:58.638Z,1510166338.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:58.654Z,1510166338.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:59.039Z,1510166339.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:59.055Z,1510166339.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:59.442Z,1510166339.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:59.472Z,1510166339.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:38:59.841Z,1510166339.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:38:59.864Z,1510166339.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:00.249Z,1510166340.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:00.265Z,1510166340.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:00.647Z,1510166340.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:00.664Z,1510166340.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:01.059Z,1510166341.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:01.122Z,1510166341.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:01.443Z,1510166341.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:01.463Z,1510166341.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:01.842Z,1510166341.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:01.868Z,1510166341.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:02.235Z,1510166342.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:02.270Z,1510166342.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:02.634Z,1510166342.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:02.669Z,1510166342.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:03.047Z,1510166343.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:03.080Z,1510166343.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:03.451Z,1510166343.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:03.484Z,1510166343.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:03.845Z,1510166343.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:03.884Z,1510166343.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:04.241Z,1510166344.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:04.274Z,1510166344.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:04.636Z,1510166344.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:04.654Z,1510166344.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:05.035Z,1510166345.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:05.055Z,1510166345.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:05.435Z,1510166345.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:05.456Z,1510166345.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:05.835Z,1510166345.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:05.856Z,1510166345.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:06.241Z,1510166346.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:06.259Z,1510166346.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:06.646Z,1510166346.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:06.663Z,1510166346.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:07.050Z,1510166347.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:07.100Z,1510166347.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:07.438Z,1510166347.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:07.497Z,1510166347.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:07.835Z,1510166347.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:07.865Z,1510166347.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:08.242Z,1510166348.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:08.299Z,1510166348.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:08.637Z,1510166348.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:08.670Z,1510166348.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:09.043Z,1510166349.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:09.108Z,1510166349.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:09.452Z,1510166349.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:09.479Z,1510166349.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:09.854Z,1510166349.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:09.872Z,1510166349.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:10.233Z,1510166350.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:10.249Z,1510166350.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:10.646Z,1510166350.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:10.682Z,1510166350.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:11.043Z,1510166351.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:11.086Z,1510166351.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:11.445Z,1510166351.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:11.500Z,1510166351.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:11.850Z,1510166351.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:11.871Z,1510166351.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:12.256Z,1510166352.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:12.278Z,1510166352.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:12.658Z,1510166352.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:12.681Z,1510166352.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:13.034Z,1510166353.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:13.064Z,1510166353.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:13.438Z,1510166353.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:13.485Z,1510166353.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:13.837Z,1510166353.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:13.874Z,1510166353.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:14.258Z,1510166354.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:14.292Z,1510166354.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:14.654Z,1510166354.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:14.687Z,1510166354.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:15.065Z,1510166355.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:15.094Z,1510166355.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:15.442Z,1510166355.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:15.461Z,1510166355.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:15.843Z,1510166355.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:15.862Z,1510166355.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:16.244Z,1510166356.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:16.272Z,1510166356.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:16.645Z,1510166356.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:16.672Z,1510166356.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:17.054Z,1510166357.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:17.074Z,1510166357.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:17.455Z,1510166357.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:17.513Z,1510166357.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:17.849Z,1510166357.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:17.871Z,1510166357.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:18.228Z,1510166358.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:18.266Z,1510166358.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:18.638Z,1510166358.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:18.664Z,1510166358.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:19.027Z,1510166359.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:19.061Z,1510166359.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:19.428Z,1510166359.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:19.463Z,1510166359.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:19.831Z,1510166359.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:19.862Z,1510166359.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:20.251Z,1510166360.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:20.272Z,1510166360.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:20.649Z,1510166360.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:20.671Z,1510166360.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:21.052Z,1510166361.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:21.068Z,1510166361.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:21.431Z,1510166361.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:21.460Z,1510166361.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:21.827Z,1510166361.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:21.843Z,1510166361.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:22.233Z,1510166362.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:22.265Z,1510166362.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:22.635Z,1510166362.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:22.677Z,1510166362.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:23.041Z,1510166363.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:23.073Z,1510166363.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:23.448Z,1510166363.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:23.474Z,1510166363.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:23.846Z,1510166363.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:23.871Z,1510166363.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:24.242Z,1510166364.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:24.279Z,1510166364.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:24.634Z,1510166364.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:24.670Z,1510166364.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:25.041Z,1510166365.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:25.089Z,1510166365.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:25.446Z,1510166365.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:25.476Z,1510166365.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:25.842Z,1510166365.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:25.859Z,1510166365.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:26.251Z,1510166366.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:26.289Z,1510166366.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:26.660Z,1510166366.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:26.700Z,1510166366.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:27.044Z,1510166367.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:27.093Z,1510166367.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:27.439Z,1510166367.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:27.477Z,1510166367.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:27.845Z,1510166367.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:27.863Z,1510166367.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:28.232Z,1510166368.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:28.271Z,1510166368.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:28.638Z,1510166368.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:28.676Z,1510166368.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:29.058Z,1510166369.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:29.103Z,1510166369.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:29.452Z,1510166369.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:29.469Z,1510166369.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:29.846Z,1510166369.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:29.931Z,1510166369.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:30.232Z,1510166370.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:30.268Z,1510166370.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:30.632Z,1510166370.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:30.680Z,1510166370.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:31.031Z,1510166371.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:31.070Z,1510166371.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:31.432Z,1510166371.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:31.480Z,1510166371.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:31.827Z,1510166371.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:31.864Z,1510166371.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:32.243Z,1510166372.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:32.279Z,1510166372.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:32.641Z,1510166372.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:32.676Z,1510166372.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:33.038Z,1510166373.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:33.066Z,1510166373.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:33.431Z,1510166373.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:33.451Z,1510166373.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:33.835Z,1510166373.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:33.851Z,1510166373.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:34.234Z,1510166374.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:34.251Z,1510166374.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:34.635Z,1510166374.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:34.656Z,1510166374.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:35.045Z,1510166375.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:35.062Z,1510166375.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:35.448Z,1510166375.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:35.465Z,1510166375.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:35.846Z,1510166375.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:35.867Z,1510166375.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:35.867Z,1510166375.867 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 105
2017-11-08T18:39:35.867Z,1510166375.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T18:39:35.869Z,1510166375.869 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:35.869Z,1510166375.869 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 105
2017-11-08T18:39:35.869Z,1510166375.869 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T18:39:35.871Z,1510166375.871 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:35.871Z,1510166375.871 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 105
2017-11-08T18:39:35.871Z,1510166375.871 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T18:39:35.946Z,1510166375.946 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T18:39:35.946Z,1510166375.946 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T18:39:35.946Z,1510166375.946 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T18:39:36.231Z,1510166376.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:36.342Z,1510166376.342 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T18:39:36.342Z,1510166376.342 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 105
2017-11-08T18:39:36.342Z,1510166376.342 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T18:39:36.342Z,1510166376.342 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 105
2017-11-08T18:39:36.343Z,1510166376.343 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T18:39:36.343Z,1510166376.343 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 105
2017-11-08T18:39:36.627Z,1510166376.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:36.661Z,1510166376.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T18:39:36.661Z,1510166376.661 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:39:36.662Z,1510166376.662 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:39:36.662Z,1510166376.662 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T18:39:36.663Z,1510166376.663 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:39:36.663Z,1510166376.663 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:39:36.663Z,1510166376.663 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T18:39:36.664Z,1510166376.664 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:39:36.664Z,1510166376.664 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:39:37.027Z,1510166377.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:37.061Z,1510166377.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T18:39:37.062Z,1510166377.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:37.428Z,1510166377.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:37.461Z,1510166377.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T18:39:37.462Z,1510166377.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:37.827Z,1510166377.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:37.861Z,1510166377.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T18:39:37.862Z,1510166377.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:38.247Z,1510166378.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:38.264Z,1510166378.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T18:39:38.265Z,1510166378.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:38.649Z,1510166378.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:38.671Z,1510166378.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T18:39:38.672Z,1510166378.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:39.044Z,1510166379.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:39.060Z,1510166379.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T18:39:39.061Z,1510166379.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:39.431Z,1510166379.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:39.455Z,1510166379.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T18:39:39.456Z,1510166379.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:39.827Z,1510166379.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:39.869Z,1510166379.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T18:39:39.870Z,1510166379.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:40.229Z,1510166380.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:40.262Z,1510166380.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T18:39:40.263Z,1510166380.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:40.632Z,1510166380.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:40.657Z,1510166380.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T18:39:40.658Z,1510166380.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:41.052Z,1510166381.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:41.067Z,1510166381.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T18:39:41.068Z,1510166381.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:41.446Z,1510166381.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:41.463Z,1510166381.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T18:39:41.463Z,1510166381.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:41.855Z,1510166381.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:41.875Z,1510166381.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T18:39:41.876Z,1510166381.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:42.248Z,1510166382.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:42.266Z,1510166382.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T18:39:42.267Z,1510166382.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:42.631Z,1510166382.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:42.661Z,1510166382.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T18:39:42.662Z,1510166382.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:43.037Z,1510166383.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:43.069Z,1510166383.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T18:39:43.070Z,1510166383.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:43.439Z,1510166383.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:43.474Z,1510166383.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T18:39:43.476Z,1510166383.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:43.834Z,1510166383.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:43.874Z,1510166383.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T18:39:43.875Z,1510166383.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:44.249Z,1510166384.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:44.289Z,1510166384.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T18:39:44.290Z,1510166384.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:44.651Z,1510166384.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:44.667Z,1510166384.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T18:39:44.668Z,1510166384.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:45.056Z,1510166385.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:45.078Z,1510166385.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T18:39:45.079Z,1510166385.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:45.438Z,1510166385.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:45.471Z,1510166385.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T18:39:45.472Z,1510166385.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:45.838Z,1510166385.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:45.885Z,1510166385.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T18:39:45.886Z,1510166385.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:49.970Z,1510166389.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:50.020Z,1510166390.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2017-11-08T18:39:50.021Z,1510166390.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:50.140Z,1510166390.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:50.195Z,1510166390.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2017-11-08T18:39:50.196Z,1510166390.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:50.564Z,1510166390.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:50.584Z,1510166390.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2017-11-08T18:39:50.585Z,1510166390.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:50.959Z,1510166390.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:50.981Z,1510166390.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2017-11-08T18:39:50.982Z,1510166390.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:51.360Z,1510166391.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:51.445Z,1510166391.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T18:39:51.446Z,1510166391.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:51.735Z,1510166391.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:51.752Z,1510166391.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2017-11-08T18:39:51.770Z,1510166391.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:52.141Z,1510166392.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:52.193Z,1510166392.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2017-11-08T18:39:52.194Z,1510166392.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:52.545Z,1510166392.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:52.589Z,1510166392.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2017-11-08T18:39:52.590Z,1510166392.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:52.951Z,1510166392.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:52.967Z,1510166392.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2017-11-08T18:39:52.968Z,1510166392.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:53.368Z,1510166393.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:53.427Z,1510166393.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T18:39:53.428Z,1510166393.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:53.755Z,1510166393.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:53.772Z,1510166393.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2017-11-08T18:39:53.773Z,1510166393.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:54.139Z,1510166394.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:54.190Z,1510166394.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2017-11-08T18:39:54.191Z,1510166394.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:54.531Z,1510166394.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:54.563Z,1510166394.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2017-11-08T18:39:54.564Z,1510166394.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:54.939Z,1510166394.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:54.967Z,1510166394.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2017-11-08T18:39:54.968Z,1510166394.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:55.332Z,1510166395.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:55.363Z,1510166395.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2017-11-08T18:39:55.364Z,1510166395.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:55.731Z,1510166395.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:55.763Z,1510166395.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2017-11-08T18:39:55.764Z,1510166395.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:56.150Z,1510166396.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:56.176Z,1510166396.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:56.552Z,1510166396.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:56.569Z,1510166396.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:56.950Z,1510166396.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:56.982Z,1510166396.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:57.332Z,1510166397.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:57.369Z,1510166397.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:57.732Z,1510166397.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:57.778Z,1510166397.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:58.137Z,1510166398.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:58.166Z,1510166398.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:58.536Z,1510166398.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:58.580Z,1510166398.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:58.953Z,1510166398.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:58.982Z,1510166398.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:59.354Z,1510166399.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:59.382Z,1510166399.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:39:59.751Z,1510166399.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:39:59.784Z,1510166399.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:00.139Z,1510166400.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:00.156Z,1510166400.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:00.539Z,1510166400.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:00.556Z,1510166400.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:00.938Z,1510166400.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:00.955Z,1510166400.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:01.339Z,1510166401.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:01.360Z,1510166401.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:01.742Z,1510166401.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:01.759Z,1510166401.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:02.154Z,1510166402.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:02.193Z,1510166402.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:02.550Z,1510166402.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:02.592Z,1510166402.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:02.950Z,1510166402.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:02.966Z,1510166402.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:03.342Z,1510166403.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:03.358Z,1510166403.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:03.739Z,1510166403.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:03.767Z,1510166403.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:04.145Z,1510166404.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:04.168Z,1510166404.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:04.545Z,1510166404.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:04.562Z,1510166404.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:04.953Z,1510166404.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:04.969Z,1510166404.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:05.355Z,1510166405.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:05.376Z,1510166405.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:05.752Z,1510166405.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:05.768Z,1510166405.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:06.135Z,1510166406.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:06.161Z,1510166406.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:06.532Z,1510166406.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:06.571Z,1510166406.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:06.939Z,1510166406.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:06.980Z,1510166406.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:07.354Z,1510166407.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:07.372Z,1510166407.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:07.735Z,1510166407.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:07.756Z,1510166407.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:08.150Z,1510166408.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:08.183Z,1510166408.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:08.553Z,1510166408.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:08.581Z,1510166408.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:08.955Z,1510166408.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:08.982Z,1510166408.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:09.340Z,1510166409.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:09.358Z,1510166409.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:09.735Z,1510166409.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:09.751Z,1510166409.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:10.140Z,1510166410.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:10.157Z,1510166410.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:10.540Z,1510166410.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:10.557Z,1510166410.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:10.949Z,1510166410.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:10.988Z,1510166410.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:11.354Z,1510166411.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:11.386Z,1510166411.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:11.754Z,1510166411.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:11.771Z,1510166411.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:12.145Z,1510166412.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:12.162Z,1510166412.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:12.541Z,1510166412.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:12.557Z,1510166412.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:12.953Z,1510166412.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:12.986Z,1510166412.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:13.342Z,1510166413.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:13.372Z,1510166413.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:13.746Z,1510166413.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:13.763Z,1510166413.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:14.151Z,1510166414.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:14.167Z,1510166414.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:14.555Z,1510166414.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:14.608Z,1510166414.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:14.949Z,1510166414.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:14.975Z,1510166414.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:15.335Z,1510166415.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:15.370Z,1510166415.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:15.746Z,1510166415.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:15.762Z,1510166415.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:16.136Z,1510166416.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:16.172Z,1510166416.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:16.538Z,1510166416.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:16.576Z,1510166416.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:16.959Z,1510166416.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:16.977Z,1510166416.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:17.346Z,1510166417.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:17.379Z,1510166417.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:17.756Z,1510166417.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:17.764Z,1510166417.764 [BPC1](ERROR): Failed to receive battery data
2017-11-08T18:40:17.765Z,1510166417.765 [BPC1] Communications Fault, FailCount= 1
2017-11-08T18:40:17.765Z,1510166417.765 [BPC1](ERROR): Communications Fault
2017-11-08T18:40:17.774Z,1510166417.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:17.853Z,1510166417.853 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T18:40:18.132Z,1510166418.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:18.171Z,1510166418.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:18.536Z,1510166418.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:18.571Z,1510166418.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:18.936Z,1510166418.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:18.968Z,1510166418.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:19.057Z,1510166419.057 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T18:40:19.057Z,1510166419.057 [BPC1] No Fault, FailCount= 1
2017-11-08T18:40:19.337Z,1510166419.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:19.413Z,1510166419.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:19.732Z,1510166419.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:19.749Z,1510166419.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:20.147Z,1510166420.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:20.163Z,1510166420.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:20.551Z,1510166420.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:20.566Z,1510166420.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:20.946Z,1510166420.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:20.963Z,1510166420.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:21.340Z,1510166421.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:21.360Z,1510166421.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:21.741Z,1510166421.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:21.758Z,1510166421.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:22.143Z,1510166422.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:22.160Z,1510166422.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:22.542Z,1510166422.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:22.558Z,1510166422.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:22.946Z,1510166422.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:22.963Z,1510166422.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:23.346Z,1510166423.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:23.362Z,1510166423.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:23.746Z,1510166423.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:23.762Z,1510166423.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:24.143Z,1510166424.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:24.164Z,1510166424.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:24.538Z,1510166424.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:24.554Z,1510166424.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:24.941Z,1510166424.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:24.957Z,1510166424.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:25.342Z,1510166425.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:25.358Z,1510166425.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:25.737Z,1510166425.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:25.753Z,1510166425.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:26.154Z,1510166426.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:26.186Z,1510166426.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:26.554Z,1510166426.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:26.571Z,1510166426.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:26.946Z,1510166426.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:26.968Z,1510166426.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:27.341Z,1510166427.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:27.363Z,1510166427.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:27.742Z,1510166427.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:27.795Z,1510166427.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:28.138Z,1510166428.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:28.155Z,1510166428.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:28.542Z,1510166428.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:28.559Z,1510166428.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:28.952Z,1510166428.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:28.970Z,1510166428.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:29.355Z,1510166429.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:29.376Z,1510166429.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:29.752Z,1510166429.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:29.776Z,1510166429.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:30.142Z,1510166430.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:30.162Z,1510166430.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:30.553Z,1510166430.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:30.576Z,1510166430.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:30.946Z,1510166430.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:30.962Z,1510166430.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:31.344Z,1510166431.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:31.360Z,1510166431.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:31.744Z,1510166431.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:31.770Z,1510166431.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:32.146Z,1510166432.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:32.168Z,1510166432.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:32.557Z,1510166432.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:32.574Z,1510166432.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:32.953Z,1510166432.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:32.970Z,1510166432.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:33.335Z,1510166433.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:33.368Z,1510166433.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:33.735Z,1510166433.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:33.764Z,1510166433.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:34.136Z,1510166434.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:34.173Z,1510166434.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:34.539Z,1510166434.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:34.566Z,1510166434.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:34.958Z,1510166434.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:34.976Z,1510166434.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:35.354Z,1510166435.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:35.377Z,1510166435.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:35.757Z,1510166435.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:35.775Z,1510166435.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:36.132Z,1510166436.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:36.171Z,1510166436.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:36.536Z,1510166436.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:36.570Z,1510166436.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:36.936Z,1510166436.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:36.968Z,1510166436.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:37.337Z,1510166437.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:37.353Z,1510166437.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:37.740Z,1510166437.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:37.757Z,1510166437.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:38.151Z,1510166438.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:38.224Z,1510166438.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:38.550Z,1510166438.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:38.590Z,1510166438.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:38.947Z,1510166438.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:38.963Z,1510166438.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:39.338Z,1510166439.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:39.356Z,1510166439.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:39.738Z,1510166439.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:39.795Z,1510166439.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:40.138Z,1510166440.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:40.154Z,1510166440.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:40.539Z,1510166440.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:40.599Z,1510166440.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:40.950Z,1510166440.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:40.967Z,1510166440.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:41.346Z,1510166441.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:41.362Z,1510166441.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:41.750Z,1510166441.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:41.766Z,1510166441.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:42.141Z,1510166442.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:42.157Z,1510166442.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:42.541Z,1510166442.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:42.557Z,1510166442.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:42.943Z,1510166442.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:42.961Z,1510166442.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:46.059Z,1510166446.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:46.095Z,1510166446.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:46.204Z,1510166446.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:46.251Z,1510166446.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:46.629Z,1510166446.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:46.645Z,1510166446.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:47.033Z,1510166447.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:47.049Z,1510166447.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:47.418Z,1510166447.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:47.450Z,1510166447.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:47.807Z,1510166447.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:47.842Z,1510166447.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:48.208Z,1510166448.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:48.240Z,1510166448.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:48.604Z,1510166448.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:48.650Z,1510166448.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:49.022Z,1510166449.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:49.054Z,1510166449.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:49.417Z,1510166449.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:49.445Z,1510166449.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:49.818Z,1510166449.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:49.844Z,1510166449.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:50.207Z,1510166450.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:50.248Z,1510166450.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:50.603Z,1510166450.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:50.623Z,1510166450.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:51.003Z,1510166451.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:51.024Z,1510166451.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:51.408Z,1510166451.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:51.424Z,1510166451.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:51.807Z,1510166451.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:51.822Z,1510166451.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:52.224Z,1510166452.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:52.248Z,1510166452.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:52.621Z,1510166452.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:52.644Z,1510166452.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:53.025Z,1510166453.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:53.050Z,1510166453.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:53.406Z,1510166453.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:53.423Z,1510166453.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:53.808Z,1510166453.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:53.836Z,1510166453.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:54.210Z,1510166454.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:54.231Z,1510166454.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:54.610Z,1510166454.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:54.627Z,1510166454.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:55.022Z,1510166455.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:55.038Z,1510166455.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:55.417Z,1510166455.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:55.433Z,1510166455.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:55.818Z,1510166455.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:55.834Z,1510166455.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:56.211Z,1510166456.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:56.232Z,1510166456.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:56.610Z,1510166456.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:56.626Z,1510166456.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:57.011Z,1510166457.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:57.027Z,1510166457.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:57.411Z,1510166457.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:57.432Z,1510166457.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:57.808Z,1510166457.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:57.828Z,1510166457.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:58.222Z,1510166458.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:58.238Z,1510166458.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:58.626Z,1510166458.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:58.658Z,1510166458.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:59.022Z,1510166459.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:59.038Z,1510166459.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:59.413Z,1510166459.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:59.430Z,1510166459.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:40:59.813Z,1510166459.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:40:59.875Z,1510166459.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:00.214Z,1510166460.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:00.247Z,1510166460.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:00.614Z,1510166460.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:00.672Z,1510166460.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:01.020Z,1510166461.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:01.037Z,1510166461.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:01.424Z,1510166461.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:01.469Z,1510166461.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:01.824Z,1510166461.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:01.844Z,1510166461.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:02.218Z,1510166462.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:02.275Z,1510166462.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:02.615Z,1510166462.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:02.631Z,1510166462.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:03.015Z,1510166463.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:03.031Z,1510166463.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:03.415Z,1510166463.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:03.431Z,1510166463.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:03.811Z,1510166463.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:03.826Z,1510166463.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:04.223Z,1510166464.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:04.244Z,1510166464.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:04.623Z,1510166464.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:04.644Z,1510166464.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:05.024Z,1510166465.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:05.040Z,1510166465.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:05.414Z,1510166465.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:05.431Z,1510166465.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:05.813Z,1510166465.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:05.830Z,1510166465.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:06.211Z,1510166466.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:06.231Z,1510166466.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:06.614Z,1510166466.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:06.630Z,1510166466.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:07.023Z,1510166467.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:07.040Z,1510166467.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:07.423Z,1510166467.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:07.443Z,1510166467.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:07.823Z,1510166467.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:07.844Z,1510166467.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:08.211Z,1510166468.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:08.241Z,1510166468.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:08.610Z,1510166468.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:08.626Z,1510166468.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:09.014Z,1510166469.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:09.035Z,1510166469.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:09.411Z,1510166469.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:09.433Z,1510166469.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:09.810Z,1510166469.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:09.826Z,1510166469.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:10.223Z,1510166470.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:10.244Z,1510166470.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:10.622Z,1510166470.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:10.679Z,1510166470.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:11.023Z,1510166471.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:11.043Z,1510166471.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:11.414Z,1510166471.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:11.430Z,1510166471.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:11.811Z,1510166471.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:11.833Z,1510166471.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:12.207Z,1510166472.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:12.243Z,1510166472.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:12.613Z,1510166472.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:12.629Z,1510166472.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:13.022Z,1510166473.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:13.039Z,1510166473.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:13.423Z,1510166473.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:13.443Z,1510166473.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:13.823Z,1510166473.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:13.844Z,1510166473.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:14.214Z,1510166474.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:14.230Z,1510166474.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:14.611Z,1510166474.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:14.631Z,1510166474.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:15.014Z,1510166475.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:15.030Z,1510166475.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:15.418Z,1510166475.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:15.435Z,1510166475.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:15.811Z,1510166475.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:15.844Z,1510166475.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:16.227Z,1510166476.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:16.244Z,1510166476.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:16.627Z,1510166476.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:16.644Z,1510166476.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:17.025Z,1510166477.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:17.041Z,1510166477.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:17.408Z,1510166477.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:17.435Z,1510166477.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:17.807Z,1510166477.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:17.839Z,1510166477.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:18.204Z,1510166478.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:18.231Z,1510166478.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:18.607Z,1510166478.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:18.642Z,1510166478.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:19.025Z,1510166479.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:19.044Z,1510166479.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:19.426Z,1510166479.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:19.442Z,1510166479.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:19.828Z,1510166479.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:19.848Z,1510166479.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:20.207Z,1510166480.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:20.240Z,1510166480.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:20.603Z,1510166480.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:20.639Z,1510166480.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:21.007Z,1510166481.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:21.069Z,1510166481.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:21.412Z,1510166481.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:21.438Z,1510166481.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:21.808Z,1510166481.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:21.835Z,1510166481.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:22.227Z,1510166482.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:22.331Z,1510166482.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:22.628Z,1510166482.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:22.645Z,1510166482.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:23.022Z,1510166483.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:23.069Z,1510166483.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:23.408Z,1510166483.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:23.433Z,1510166483.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:23.807Z,1510166483.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:23.840Z,1510166483.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:24.208Z,1510166484.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:24.235Z,1510166484.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:24.607Z,1510166484.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:24.633Z,1510166484.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:25.024Z,1510166485.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:25.044Z,1510166485.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:25.424Z,1510166485.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:25.441Z,1510166485.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:25.818Z,1510166485.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:25.842Z,1510166485.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:26.207Z,1510166486.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:26.232Z,1510166486.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:26.607Z,1510166486.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:26.633Z,1510166486.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:27.003Z,1510166487.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:27.034Z,1510166487.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:27.412Z,1510166487.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:27.437Z,1510166487.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:27.803Z,1510166487.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:27.834Z,1510166487.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:28.218Z,1510166488.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:28.240Z,1510166488.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:28.628Z,1510166488.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:28.644Z,1510166488.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:29.027Z,1510166489.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:29.054Z,1510166489.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:29.407Z,1510166489.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:29.433Z,1510166489.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:29.807Z,1510166489.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:29.843Z,1510166489.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:30.204Z,1510166490.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:30.240Z,1510166490.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:30.607Z,1510166490.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:30.638Z,1510166490.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:30.990Z,1510166490.990 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T18:41:30.990Z,1510166490.990 [NAL9602] Data Fault, FailCount= 5
2017-11-08T18:41:30.990Z,1510166490.990 [NAL9602](ERROR): Data Fault
2017-11-08T18:41:31.008Z,1510166491.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:31.052Z,1510166491.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:31.133Z,1510166491.133 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T18:41:31.133Z,1510166491.133 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-11-08T18:41:31.390Z,1510166491.390 [NAL9602](INFO): Powering down
2017-11-08T18:41:31.408Z,1510166491.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:31.449Z,1510166491.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:31.527Z,1510166491.527 [CBIT](INFO): Critical error at 20171108T184131
2017-11-08T18:41:31.803Z,1510166491.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:31.828Z,1510166491.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:32.207Z,1510166492.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:32.242Z,1510166492.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:32.606Z,1510166492.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:32.644Z,1510166492.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:33.002Z,1510166493.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:33.019Z,1510166493.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:33.407Z,1510166493.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:33.448Z,1510166493.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:33.802Z,1510166493.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:33.818Z,1510166493.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:34.202Z,1510166494.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:34.219Z,1510166494.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:34.607Z,1510166494.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:34.648Z,1510166494.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:35.006Z,1510166495.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:35.022Z,1510166495.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:35.402Z,1510166495.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:35.419Z,1510166495.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:35.803Z,1510166495.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:35.824Z,1510166495.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:36.202Z,1510166496.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:36.218Z,1510166496.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:36.602Z,1510166496.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:36.619Z,1510166496.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:37.007Z,1510166497.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:37.027Z,1510166497.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:37.410Z,1510166497.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:37.426Z,1510166497.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:37.810Z,1510166497.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:37.826Z,1510166497.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:38.210Z,1510166498.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:38.226Z,1510166498.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:38.606Z,1510166498.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:38.627Z,1510166498.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:39.006Z,1510166499.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:39.022Z,1510166499.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:39.407Z,1510166499.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:39.441Z,1510166499.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:39.806Z,1510166499.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:39.827Z,1510166499.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:40.210Z,1510166500.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:40.226Z,1510166500.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:40.610Z,1510166500.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:40.627Z,1510166500.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:41.006Z,1510166501.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:41.027Z,1510166501.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:41.410Z,1510166501.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:41.427Z,1510166501.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:41.430Z,1510166501.430 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T18:41:41.430Z,1510166501.430 [Default:CheckIn:C.Wait] Stopped
2017-11-08T18:41:41.430Z,1510166501.430 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T18:41:41.430Z,1510166501.430 [Default:CheckIn:D] Running Loop=1
2017-11-08T18:41:41.811Z,1510166501.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:41.883Z,1510166501.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:41.894Z,1510166501.894 [Default:CheckIn:D] Stopped
2017-11-08T18:41:41.894Z,1510166501.894 [Default:CheckIn:E] Running Loop=1
2017-11-08T18:41:42.211Z,1510166502.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:42.271Z,1510166502.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:42.275Z,1510166502.275 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 315.015234 min 
2017-11-08T18:41:42.275Z,1510166502.275 [Default:CheckIn:E] Stopped
2017-11-08T18:41:42.275Z,1510166502.275 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T18:41:42.275Z,1510166502.275 [Default:CheckIn] Stopped
2017-11-08T18:41:42.275Z,1510166502.275 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T18:41:42.276Z,1510166502.276 [Default:CheckIn](INFO): Running loop #19
2017-11-08T18:41:42.276Z,1510166502.276 [Default:CheckIn] Running Loop=19
2017-11-08T18:41:42.276Z,1510166502.276 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T18:41:42.276Z,1510166502.276 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T18:41:42.610Z,1510166502.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:42.626Z,1510166502.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:46.945Z,1510166506.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:47.015Z,1510166507.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:47.154Z,1510166507.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:47.213Z,1510166507.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:47.534Z,1510166507.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:47.583Z,1510166507.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:47.938Z,1510166507.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:47.962Z,1510166507.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:48.330Z,1510166508.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:48.363Z,1510166508.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:48.734Z,1510166508.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:48.771Z,1510166508.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:49.134Z,1510166509.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:49.171Z,1510166509.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:49.533Z,1510166509.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:49.566Z,1510166509.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:49.934Z,1510166509.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:49.950Z,1510166509.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:50.339Z,1510166510.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:50.373Z,1510166510.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:50.731Z,1510166510.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:50.747Z,1510166510.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:51.135Z,1510166511.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:51.175Z,1510166511.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:51.536Z,1510166511.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:51.575Z,1510166511.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:51.931Z,1510166511.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:51.948Z,1510166511.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:52.331Z,1510166512.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:52.351Z,1510166512.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:52.735Z,1510166512.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:52.776Z,1510166512.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:53.130Z,1510166513.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:53.147Z,1510166513.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:53.534Z,1510166513.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:53.551Z,1510166513.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:53.935Z,1510166513.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:53.952Z,1510166513.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:54.330Z,1510166514.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:54.347Z,1510166514.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:54.735Z,1510166514.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:54.750Z,1510166514.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:55.137Z,1510166515.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:55.153Z,1510166515.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:55.539Z,1510166515.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:55.557Z,1510166515.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:55.937Z,1510166515.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:55.998Z,1510166515.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:56.339Z,1510166516.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:56.363Z,1510166516.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:56.746Z,1510166516.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:56.763Z,1510166516.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:57.168Z,1510166517.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:57.198Z,1510166517.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:57.544Z,1510166517.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:57.569Z,1510166517.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:57.940Z,1510166517.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:57.957Z,1510166517.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:58.340Z,1510166518.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:58.363Z,1510166518.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:58.743Z,1510166518.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:58.764Z,1510166518.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:59.130Z,1510166519.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:59.163Z,1510166519.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:59.536Z,1510166519.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:59.560Z,1510166519.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:41:59.935Z,1510166519.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:41:59.961Z,1510166519.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:00.335Z,1510166520.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:00.360Z,1510166520.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:00.749Z,1510166520.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:00.765Z,1510166520.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:01.144Z,1510166521.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:01.162Z,1510166521.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:01.531Z,1510166521.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:01.556Z,1510166521.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:01.955Z,1510166521.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:02.026Z,1510166522.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:02.344Z,1510166522.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:02.369Z,1510166522.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:02.736Z,1510166522.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:02.770Z,1510166522.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:03.150Z,1510166523.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:03.213Z,1510166523.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:03.537Z,1510166523.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:03.582Z,1510166523.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:03.938Z,1510166523.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:03.980Z,1510166523.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:04.341Z,1510166524.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:04.386Z,1510166524.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:04.746Z,1510166524.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:04.833Z,1510166524.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:05.204Z,1510166525.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:05.291Z,1510166525.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:05.557Z,1510166525.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:05.650Z,1510166525.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:05.943Z,1510166525.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:06.009Z,1510166526.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:06.341Z,1510166526.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:06.357Z,1510166526.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:06.764Z,1510166526.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:06.806Z,1510166526.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:07.146Z,1510166527.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:07.224Z,1510166527.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:07.535Z,1510166527.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:07.560Z,1510166527.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:07.935Z,1510166527.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:07.992Z,1510166527.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:08.334Z,1510166528.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:08.350Z,1510166528.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:08.734Z,1510166528.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:08.793Z,1510166528.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:09.130Z,1510166529.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:09.147Z,1510166529.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:09.537Z,1510166529.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:09.554Z,1510166529.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:09.938Z,1510166529.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:09.960Z,1510166529.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:10.337Z,1510166530.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:10.354Z,1510166530.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:10.735Z,1510166530.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:10.751Z,1510166530.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:11.137Z,1510166531.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:11.153Z,1510166531.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:11.536Z,1510166531.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:11.559Z,1510166531.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:11.936Z,1510166531.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:11.951Z,1510166531.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:12.344Z,1510166532.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:12.367Z,1510166532.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:12.742Z,1510166532.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:12.758Z,1510166532.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:13.131Z,1510166533.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:13.168Z,1510166533.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:13.538Z,1510166533.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:13.560Z,1510166533.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:13.932Z,1510166533.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:13.967Z,1510166533.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:14.332Z,1510166534.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:14.364Z,1510166534.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:14.738Z,1510166534.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:14.759Z,1510166534.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:15.140Z,1510166535.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:15.163Z,1510166535.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:15.552Z,1510166535.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:15.568Z,1510166535.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:15.946Z,1510166535.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:15.965Z,1510166535.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:16.334Z,1510166536.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:16.368Z,1510166536.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:16.746Z,1510166536.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:16.762Z,1510166536.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:17.135Z,1510166537.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:17.203Z,1510166537.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:17.534Z,1510166537.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:17.558Z,1510166537.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:17.934Z,1510166537.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:17.959Z,1510166537.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:18.342Z,1510166538.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:18.364Z,1510166538.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:18.730Z,1510166538.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:18.759Z,1510166538.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:19.134Z,1510166539.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:19.158Z,1510166539.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:19.531Z,1510166539.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:19.556Z,1510166539.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:19.930Z,1510166539.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:19.959Z,1510166539.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:20.330Z,1510166540.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:20.354Z,1510166540.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:20.736Z,1510166540.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:20.770Z,1510166540.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:21.134Z,1510166541.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:21.165Z,1510166541.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:21.535Z,1510166541.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:21.558Z,1510166541.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:21.947Z,1510166541.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:21.966Z,1510166541.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:22.343Z,1510166542.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:22.368Z,1510166542.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:22.736Z,1510166542.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:22.771Z,1510166542.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:23.135Z,1510166543.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:23.166Z,1510166543.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:23.530Z,1510166543.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:23.555Z,1510166543.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:23.944Z,1510166543.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:23.963Z,1510166543.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:24.334Z,1510166544.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:24.365Z,1510166544.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:24.750Z,1510166544.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:24.767Z,1510166544.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:25.131Z,1510166545.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:25.163Z,1510166545.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:25.535Z,1510166545.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:25.564Z,1510166545.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:25.933Z,1510166545.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:25.973Z,1510166545.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:26.334Z,1510166546.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:26.359Z,1510166546.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:26.734Z,1510166546.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:26.761Z,1510166546.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:27.149Z,1510166547.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:27.165Z,1510166547.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:27.536Z,1510166547.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:27.572Z,1510166547.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:27.943Z,1510166547.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:28.018Z,1510166548.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:28.330Z,1510166548.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:28.406Z,1510166548.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:28.734Z,1510166548.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:28.753Z,1510166548.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:29.147Z,1510166549.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:29.181Z,1510166549.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:29.538Z,1510166549.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:29.597Z,1510166549.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:29.942Z,1510166549.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:29.959Z,1510166549.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:30.337Z,1510166550.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:30.392Z,1510166550.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:30.741Z,1510166550.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:30.759Z,1510166550.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:31.136Z,1510166551.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:31.153Z,1510166551.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:31.538Z,1510166551.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:31.558Z,1510166551.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:31.948Z,1510166551.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:31.964Z,1510166551.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:32.336Z,1510166552.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:32.352Z,1510166552.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:32.740Z,1510166552.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:32.763Z,1510166552.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:33.138Z,1510166553.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:33.159Z,1510166553.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:33.540Z,1510166553.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:33.559Z,1510166553.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:33.938Z,1510166553.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:33.959Z,1510166553.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:34.336Z,1510166554.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:34.351Z,1510166554.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:34.730Z,1510166554.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:34.762Z,1510166554.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:35.138Z,1510166555.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:35.159Z,1510166555.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:35.530Z,1510166555.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:35.570Z,1510166555.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:35.930Z,1510166555.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:35.962Z,1510166555.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:36.343Z,1510166556.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:36.359Z,1510166556.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:36.740Z,1510166556.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:36.757Z,1510166556.757 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:36.757Z,1510166556.757 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 106
2017-11-08T18:42:36.757Z,1510166556.757 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T18:42:36.758Z,1510166556.758 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:36.759Z,1510166556.759 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 106
2017-11-08T18:42:36.759Z,1510166556.759 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T18:42:36.760Z,1510166556.760 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:36.760Z,1510166556.760 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 106
2017-11-08T18:42:36.760Z,1510166556.760 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T18:42:36.837Z,1510166556.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T18:42:36.838Z,1510166556.838 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T18:42:36.838Z,1510166556.838 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T18:42:37.153Z,1510166557.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:37.258Z,1510166557.258 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T18:42:37.258Z,1510166557.258 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 106
2017-11-08T18:42:37.258Z,1510166557.258 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T18:42:37.258Z,1510166557.258 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 106
2017-11-08T18:42:37.259Z,1510166557.259 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T18:42:37.259Z,1510166557.259 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 106
2017-11-08T18:42:37.531Z,1510166557.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:37.571Z,1510166557.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T18:42:37.572Z,1510166557.572 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:42:37.572Z,1510166557.572 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:42:37.573Z,1510166557.573 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T18:42:37.573Z,1510166557.573 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:42:37.574Z,1510166557.574 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:42:37.574Z,1510166557.574 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T18:42:37.574Z,1510166557.574 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:42:37.575Z,1510166557.575 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:42:37.947Z,1510166557.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:37.963Z,1510166557.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T18:42:37.964Z,1510166557.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:38.337Z,1510166558.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:38.354Z,1510166558.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T18:42:38.355Z,1510166558.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:38.742Z,1510166558.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:38.805Z,1510166558.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T18:42:38.806Z,1510166558.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:39.137Z,1510166559.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:39.153Z,1510166559.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T18:42:39.154Z,1510166559.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:39.542Z,1510166559.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:39.557Z,1510166559.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T18:42:39.558Z,1510166559.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:39.941Z,1510166559.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:39.957Z,1510166559.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T18:42:39.958Z,1510166559.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:40.339Z,1510166560.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:40.355Z,1510166560.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T18:42:40.356Z,1510166560.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:40.743Z,1510166560.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:40.770Z,1510166560.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T18:42:40.771Z,1510166560.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:41.141Z,1510166561.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:41.159Z,1510166561.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T18:42:41.160Z,1510166561.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:41.540Z,1510166561.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:41.563Z,1510166561.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T18:42:41.564Z,1510166561.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:41.941Z,1510166561.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:41.957Z,1510166561.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T18:42:41.958Z,1510166561.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:42.343Z,1510166562.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:42.363Z,1510166562.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T18:42:42.364Z,1510166562.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:42.741Z,1510166562.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:42.756Z,1510166562.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T18:42:42.757Z,1510166562.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:43.143Z,1510166563.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:43.166Z,1510166563.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T18:42:43.167Z,1510166563.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:43.545Z,1510166563.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:43.561Z,1510166563.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T18:42:43.562Z,1510166563.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:43.943Z,1510166563.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:43.960Z,1510166563.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T18:42:43.961Z,1510166563.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:47.243Z,1510166567.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:47.311Z,1510166567.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2017-11-08T18:42:47.312Z,1510166567.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:47.415Z,1510166567.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:47.451Z,1510166567.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2017-11-08T18:42:47.452Z,1510166567.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:47.815Z,1510166567.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:47.849Z,1510166567.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2017-11-08T18:42:47.849Z,1510166567.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:48.216Z,1510166568.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:48.245Z,1510166568.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2017-11-08T18:42:48.246Z,1510166568.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:48.619Z,1510166568.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:48.643Z,1510166568.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2017-11-08T18:42:48.645Z,1510166568.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:49.010Z,1510166569.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:49.048Z,1510166569.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2017-11-08T18:42:49.049Z,1510166569.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:49.410Z,1510166569.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:49.446Z,1510166569.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2017-11-08T18:42:49.447Z,1510166569.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:49.814Z,1510166569.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:49.863Z,1510166569.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2017-11-08T18:42:49.864Z,1510166569.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:50.214Z,1510166570.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:50.230Z,1510166570.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2017-11-08T18:42:50.231Z,1510166570.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:50.610Z,1510166570.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:50.671Z,1510166570.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2017-11-08T18:42:50.672Z,1510166570.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:51.015Z,1510166571.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:51.031Z,1510166571.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2017-11-08T18:42:51.032Z,1510166571.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:51.410Z,1510166571.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:51.459Z,1510166571.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2017-11-08T18:42:51.460Z,1510166571.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:51.810Z,1510166571.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:51.826Z,1510166571.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2017-11-08T18:42:51.827Z,1510166571.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:52.218Z,1510166572.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:52.235Z,1510166572.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2017-11-08T18:42:52.236Z,1510166572.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:52.618Z,1510166572.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:52.633Z,1510166572.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2017-11-08T18:42:52.634Z,1510166572.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:53.014Z,1510166573.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:53.030Z,1510166573.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2017-11-08T18:42:53.031Z,1510166573.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:53.418Z,1510166573.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:53.439Z,1510166573.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2017-11-08T18:42:53.440Z,1510166573.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:53.818Z,1510166573.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:53.834Z,1510166573.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2017-11-08T18:42:53.835Z,1510166573.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:54.217Z,1510166574.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:54.232Z,1510166574.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2017-11-08T18:42:54.233Z,1510166574.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:54.619Z,1510166574.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:54.635Z,1510166574.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2017-11-08T18:42:54.636Z,1510166574.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:55.021Z,1510166575.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:55.037Z,1510166575.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2017-11-08T18:42:55.038Z,1510166575.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:55.113Z,1510166575.113 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T18:42:55.428Z,1510166575.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:55.444Z,1510166575.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2017-11-08T18:42:55.445Z,1510166575.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:55.818Z,1510166575.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:55.835Z,1510166575.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2017-11-08T18:42:55.836Z,1510166575.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:56.221Z,1510166576.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:56.238Z,1510166576.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2017-11-08T18:42:56.239Z,1510166576.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:56.617Z,1510166576.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:56.633Z,1510166576.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2017-11-08T18:42:56.634Z,1510166576.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:57.018Z,1510166577.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:57.034Z,1510166577.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:57.415Z,1510166577.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:57.431Z,1510166577.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:57.815Z,1510166577.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:57.831Z,1510166577.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:58.218Z,1510166578.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:58.234Z,1510166578.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:58.615Z,1510166578.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:58.631Z,1510166578.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:59.015Z,1510166579.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:59.031Z,1510166579.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:59.418Z,1510166579.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:59.434Z,1510166579.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:42:59.815Z,1510166579.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:42:59.866Z,1510166579.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:00.217Z,1510166580.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:00.233Z,1510166580.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:00.628Z,1510166580.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:00.645Z,1510166580.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:01.022Z,1510166581.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:01.038Z,1510166581.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:01.421Z,1510166581.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:01.437Z,1510166581.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:01.818Z,1510166581.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:01.835Z,1510166581.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:02.216Z,1510166582.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:02.233Z,1510166582.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:02.617Z,1510166582.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:02.633Z,1510166582.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:03.014Z,1510166583.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:03.047Z,1510166583.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:03.416Z,1510166583.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:03.439Z,1510166583.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:03.816Z,1510166583.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:03.832Z,1510166583.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:04.220Z,1510166584.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:04.237Z,1510166584.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:04.616Z,1510166584.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:04.633Z,1510166584.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:05.016Z,1510166585.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:05.032Z,1510166585.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:05.420Z,1510166585.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:05.444Z,1510166585.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:05.820Z,1510166585.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:05.836Z,1510166585.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:06.220Z,1510166586.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:06.236Z,1510166586.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:06.621Z,1510166586.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:06.637Z,1510166586.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:07.016Z,1510166587.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:07.039Z,1510166587.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:07.420Z,1510166587.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:07.436Z,1510166587.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:07.817Z,1510166587.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:07.834Z,1510166587.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:08.215Z,1510166588.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:08.247Z,1510166588.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:08.618Z,1510166588.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:08.634Z,1510166588.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:09.021Z,1510166589.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:09.037Z,1510166589.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:09.416Z,1510166589.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:09.432Z,1510166589.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:09.821Z,1510166589.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:09.838Z,1510166589.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:10.221Z,1510166590.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:10.238Z,1510166590.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:10.621Z,1510166590.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:10.665Z,1510166590.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:11.021Z,1510166591.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:11.038Z,1510166591.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:11.415Z,1510166591.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:11.445Z,1510166591.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:11.817Z,1510166591.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:11.853Z,1510166591.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:12.218Z,1510166592.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:12.234Z,1510166592.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:12.622Z,1510166592.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:12.677Z,1510166592.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:13.017Z,1510166593.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:13.039Z,1510166593.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:13.422Z,1510166593.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:13.478Z,1510166593.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:13.821Z,1510166593.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:13.837Z,1510166593.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:14.220Z,1510166594.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:14.237Z,1510166594.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:14.620Z,1510166594.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:14.637Z,1510166594.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:15.020Z,1510166595.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:15.037Z,1510166595.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:15.419Z,1510166595.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:15.440Z,1510166595.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:15.817Z,1510166595.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:15.833Z,1510166595.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:16.220Z,1510166596.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:16.237Z,1510166596.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:16.621Z,1510166596.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:16.637Z,1510166596.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:17.016Z,1510166597.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:17.032Z,1510166597.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:17.420Z,1510166597.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:17.437Z,1510166597.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:17.820Z,1510166597.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:17.836Z,1510166597.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:18.216Z,1510166598.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:18.232Z,1510166598.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:18.616Z,1510166598.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:18.633Z,1510166598.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:19.010Z,1510166599.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:19.042Z,1510166599.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:19.420Z,1510166599.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:19.436Z,1510166599.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:19.811Z,1510166599.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:19.842Z,1510166599.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:20.221Z,1510166600.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:20.237Z,1510166600.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:20.620Z,1510166600.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:20.636Z,1510166600.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:21.010Z,1510166601.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:21.042Z,1510166601.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:21.420Z,1510166601.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:21.436Z,1510166601.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:21.810Z,1510166601.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:21.876Z,1510166601.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:22.210Z,1510166602.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:22.236Z,1510166602.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:22.620Z,1510166602.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:22.636Z,1510166602.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:23.020Z,1510166603.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:23.036Z,1510166603.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:23.411Z,1510166603.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:23.436Z,1510166603.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:23.820Z,1510166603.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:23.836Z,1510166603.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:24.224Z,1510166604.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:24.240Z,1510166604.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:24.611Z,1510166604.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:24.643Z,1510166604.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:25.014Z,1510166605.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:25.043Z,1510166605.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:25.439Z,1510166605.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:25.455Z,1510166605.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:25.810Z,1510166605.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:25.848Z,1510166605.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:26.214Z,1510166606.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:26.239Z,1510166606.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:26.610Z,1510166606.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:26.642Z,1510166606.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:27.010Z,1510166607.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:27.037Z,1510166607.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:27.414Z,1510166607.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:27.439Z,1510166607.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:27.810Z,1510166607.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:27.838Z,1510166607.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:28.214Z,1510166608.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:28.240Z,1510166608.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:28.614Z,1510166608.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:28.639Z,1510166608.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:29.014Z,1510166609.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:29.039Z,1510166609.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:29.415Z,1510166609.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:29.448Z,1510166609.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:29.815Z,1510166609.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:29.847Z,1510166609.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:30.225Z,1510166610.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:30.241Z,1510166610.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:30.625Z,1510166610.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:30.642Z,1510166610.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:31.015Z,1510166611.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:31.040Z,1510166611.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:31.120Z,1510166611.120 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T18:43:31.120Z,1510166611.120 [NAL9602] No Fault, FailCount= 5
2017-11-08T18:43:31.394Z,1510166611.394 [NAL9602](INFO): Powering up NAL9602
2017-11-08T18:43:31.413Z,1510166611.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:31.449Z,1510166611.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:31.811Z,1510166611.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:31.845Z,1510166611.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:32.216Z,1510166612.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:32.279Z,1510166612.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:32.615Z,1510166612.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:32.641Z,1510166612.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:33.011Z,1510166613.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:33.045Z,1510166613.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:33.411Z,1510166613.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:33.443Z,1510166613.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:33.811Z,1510166613.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:33.857Z,1510166613.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:34.211Z,1510166614.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:34.243Z,1510166614.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:34.615Z,1510166614.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:34.671Z,1510166614.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:35.010Z,1510166615.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:35.039Z,1510166615.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:35.415Z,1510166615.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:35.463Z,1510166615.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:35.811Z,1510166615.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:35.846Z,1510166615.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:36.213Z,1510166616.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:36.246Z,1510166616.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:36.615Z,1510166616.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:36.646Z,1510166616.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:37.014Z,1510166617.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:37.046Z,1510166617.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:37.411Z,1510166617.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:37.446Z,1510166617.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:37.811Z,1510166617.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:37.835Z,1510166617.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:38.215Z,1510166618.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:38.250Z,1510166618.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:38.611Z,1510166618.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:38.626Z,1510166618.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:39.011Z,1510166619.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:39.027Z,1510166619.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:39.415Z,1510166619.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:39.431Z,1510166619.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:39.815Z,1510166619.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:39.830Z,1510166619.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:40.211Z,1510166620.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:40.227Z,1510166620.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:40.615Z,1510166620.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:40.632Z,1510166620.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:41.010Z,1510166621.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:41.026Z,1510166621.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:41.411Z,1510166621.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:41.427Z,1510166621.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:41.815Z,1510166621.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:41.836Z,1510166621.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:42.233Z,1510166622.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:42.263Z,1510166622.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:42.602Z,1510166622.602 [NAL9602](INFO): NAL9602 initialized
2017-11-08T18:43:42.619Z,1510166622.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:42.636Z,1510166622.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:43.019Z,1510166623.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:43.039Z,1510166623.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:46.114Z,1510166626.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:46.172Z,1510166626.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:46.305Z,1510166626.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:46.340Z,1510166626.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:46.690Z,1510166626.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:46.719Z,1510166626.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:47.079Z,1510166627.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:47.116Z,1510166627.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:47.480Z,1510166627.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:47.512Z,1510166627.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:47.879Z,1510166627.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:47.920Z,1510166627.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:48.289Z,1510166628.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:48.320Z,1510166628.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:48.690Z,1510166628.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:48.715Z,1510166628.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:49.090Z,1510166629.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:49.116Z,1510166629.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:49.479Z,1510166629.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:49.495Z,1510166629.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:49.879Z,1510166629.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:49.920Z,1510166629.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:50.280Z,1510166630.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:50.323Z,1510166630.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:50.675Z,1510166630.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:50.695Z,1510166630.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:51.094Z,1510166631.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:51.120Z,1510166631.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:51.493Z,1510166631.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:51.543Z,1510166631.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:51.893Z,1510166631.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:51.923Z,1510166631.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:52.280Z,1510166632.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:52.297Z,1510166632.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:52.680Z,1510166632.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:52.712Z,1510166632.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:53.083Z,1510166633.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:53.103Z,1510166633.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:53.481Z,1510166633.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:53.497Z,1510166633.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:53.883Z,1510166633.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:53.899Z,1510166633.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:54.290Z,1510166634.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:54.325Z,1510166634.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:54.694Z,1510166634.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:54.725Z,1510166634.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:55.094Z,1510166635.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:55.125Z,1510166635.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:55.482Z,1510166635.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:55.499Z,1510166635.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:55.879Z,1510166635.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:55.896Z,1510166635.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:56.284Z,1510166636.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:56.301Z,1510166636.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:56.681Z,1510166636.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:56.697Z,1510166636.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:57.090Z,1510166637.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:57.122Z,1510166637.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:57.494Z,1510166637.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:57.526Z,1510166637.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:57.894Z,1510166637.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:57.910Z,1510166637.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:58.282Z,1510166638.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:58.354Z,1510166638.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:58.681Z,1510166638.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:58.703Z,1510166638.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:59.082Z,1510166639.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:59.103Z,1510166639.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:59.479Z,1510166639.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:59.535Z,1510166639.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:43:59.885Z,1510166639.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:43:59.901Z,1510166639.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:00.291Z,1510166640.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:00.339Z,1510166640.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:00.694Z,1510166640.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:00.711Z,1510166640.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:01.090Z,1510166641.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:01.106Z,1510166641.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:01.482Z,1510166641.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:01.498Z,1510166641.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:01.879Z,1510166641.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:01.900Z,1510166641.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:02.286Z,1510166642.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:02.301Z,1510166642.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:02.682Z,1510166642.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:02.697Z,1510166642.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:03.090Z,1510166643.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:03.112Z,1510166643.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:03.493Z,1510166643.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:03.509Z,1510166643.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:03.893Z,1510166643.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:03.911Z,1510166643.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:04.285Z,1510166644.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:04.307Z,1510166644.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:04.685Z,1510166644.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:04.701Z,1510166644.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:05.082Z,1510166645.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:05.097Z,1510166645.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:05.481Z,1510166645.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:05.501Z,1510166645.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:05.885Z,1510166645.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:05.900Z,1510166645.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:06.291Z,1510166646.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:06.306Z,1510166646.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:06.690Z,1510166646.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:06.711Z,1510166646.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:07.090Z,1510166647.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:07.106Z,1510166647.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:07.482Z,1510166647.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:07.498Z,1510166647.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:07.879Z,1510166647.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:07.904Z,1510166647.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:08.285Z,1510166648.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:08.301Z,1510166648.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:08.686Z,1510166648.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:08.747Z,1510166648.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:09.095Z,1510166649.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:09.116Z,1510166649.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:09.498Z,1510166649.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:09.514Z,1510166649.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:09.895Z,1510166649.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:09.911Z,1510166649.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:10.275Z,1510166650.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:10.310Z,1510166650.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:10.685Z,1510166650.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:10.701Z,1510166650.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:11.075Z,1510166651.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:11.101Z,1510166651.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:11.486Z,1510166651.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:11.508Z,1510166651.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:11.885Z,1510166651.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:11.901Z,1510166651.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:12.299Z,1510166652.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:12.315Z,1510166652.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:12.695Z,1510166652.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:12.712Z,1510166652.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:13.095Z,1510166653.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:13.111Z,1510166653.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:13.486Z,1510166653.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:13.502Z,1510166653.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:13.875Z,1510166653.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:13.910Z,1510166653.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:14.285Z,1510166654.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:14.301Z,1510166654.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:14.686Z,1510166654.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:14.702Z,1510166654.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:15.096Z,1510166655.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:15.112Z,1510166655.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:15.498Z,1510166655.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:15.514Z,1510166655.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:15.899Z,1510166655.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:15.919Z,1510166655.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:16.286Z,1510166656.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:16.308Z,1510166656.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:16.688Z,1510166656.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:16.704Z,1510166656.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:17.086Z,1510166657.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:17.111Z,1510166657.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:17.484Z,1510166657.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:17.501Z,1510166657.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:17.883Z,1510166657.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:17.912Z,1510166657.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:18.299Z,1510166658.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:18.319Z,1510166658.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:18.695Z,1510166658.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:18.716Z,1510166658.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:19.096Z,1510166659.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:19.119Z,1510166659.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:19.487Z,1510166659.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:19.512Z,1510166659.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:19.875Z,1510166659.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:19.910Z,1510166659.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:20.283Z,1510166660.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:20.312Z,1510166660.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:20.680Z,1510166660.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:20.746Z,1510166660.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:21.095Z,1510166661.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:21.163Z,1510166661.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:21.500Z,1510166661.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:21.517Z,1510166661.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:21.901Z,1510166661.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:21.918Z,1510166661.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:22.276Z,1510166662.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:22.327Z,1510166662.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:22.679Z,1510166662.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:22.715Z,1510166662.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:23.079Z,1510166663.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:23.135Z,1510166663.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:23.476Z,1510166663.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:23.492Z,1510166663.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:23.879Z,1510166663.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:23.894Z,1510166663.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:24.291Z,1510166664.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:24.319Z,1510166664.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:24.689Z,1510166664.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:24.716Z,1510166664.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:25.089Z,1510166665.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:25.115Z,1510166665.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:25.480Z,1510166665.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:25.496Z,1510166665.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:25.875Z,1510166665.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:25.896Z,1510166665.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:26.280Z,1510166666.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:26.295Z,1510166666.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:26.679Z,1510166666.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:26.696Z,1510166666.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:27.090Z,1510166667.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:27.122Z,1510166667.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:27.489Z,1510166667.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:27.521Z,1510166667.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:27.894Z,1510166667.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:27.920Z,1510166667.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:28.279Z,1510166668.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:28.299Z,1510166668.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:28.683Z,1510166668.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:28.698Z,1510166668.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:29.083Z,1510166669.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:29.100Z,1510166669.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:29.483Z,1510166669.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:29.504Z,1510166669.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:29.879Z,1510166669.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:29.899Z,1510166669.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:30.294Z,1510166670.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:30.325Z,1510166670.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:30.693Z,1510166670.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:30.725Z,1510166670.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:31.097Z,1510166671.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:31.122Z,1510166671.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:31.483Z,1510166671.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:31.543Z,1510166671.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:31.883Z,1510166671.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:31.899Z,1510166671.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:32.284Z,1510166672.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:32.300Z,1510166672.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:32.686Z,1510166672.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:32.702Z,1510166672.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:33.097Z,1510166673.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:33.133Z,1510166673.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:33.500Z,1510166673.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:33.531Z,1510166673.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:33.896Z,1510166673.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:33.934Z,1510166673.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:34.281Z,1510166674.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:34.326Z,1510166674.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:34.687Z,1510166674.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:34.703Z,1510166674.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:35.092Z,1510166675.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:35.129Z,1510166675.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:35.484Z,1510166675.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:35.500Z,1510166675.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:35.882Z,1510166675.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:35.898Z,1510166675.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:36.290Z,1510166676.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:36.306Z,1510166676.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:36.694Z,1510166676.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:36.727Z,1510166676.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:37.094Z,1510166677.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:37.110Z,1510166677.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:37.482Z,1510166677.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:37.498Z,1510166677.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:37.882Z,1510166677.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:37.899Z,1510166677.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:38.282Z,1510166678.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:38.298Z,1510166678.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:38.682Z,1510166678.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:38.698Z,1510166678.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:39.094Z,1510166679.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:39.111Z,1510166679.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:39.493Z,1510166679.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:39.534Z,1510166679.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:39.893Z,1510166679.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:39.909Z,1510166679.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:40.285Z,1510166680.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:40.301Z,1510166680.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:40.684Z,1510166680.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:40.700Z,1510166680.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:41.079Z,1510166681.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:41.105Z,1510166681.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:41.485Z,1510166681.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:41.501Z,1510166681.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:41.883Z,1510166681.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:41.916Z,1510166681.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:42.300Z,1510166682.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:42.316Z,1510166682.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:42.702Z,1510166682.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:42.724Z,1510166682.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:43.099Z,1510166683.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:43.116Z,1510166683.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:46.254Z,1510166686.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:46.349Z,1510166686.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:46.463Z,1510166686.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:46.480Z,1510166686.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:46.878Z,1510166686.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:46.902Z,1510166686.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:47.274Z,1510166687.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:47.319Z,1510166687.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:47.670Z,1510166687.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:47.702Z,1510166687.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:48.058Z,1510166688.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:48.108Z,1510166688.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:48.459Z,1510166688.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:48.480Z,1510166688.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:48.857Z,1510166688.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:48.873Z,1510166688.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:49.270Z,1510166689.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:49.286Z,1510166689.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:49.674Z,1510166689.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:49.709Z,1510166689.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:50.072Z,1510166690.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:50.117Z,1510166690.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:50.470Z,1510166690.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:50.492Z,1510166690.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:50.860Z,1510166690.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:50.885Z,1510166690.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:51.266Z,1510166691.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:51.291Z,1510166691.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:51.663Z,1510166691.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:51.684Z,1510166691.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:52.073Z,1510166692.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:52.090Z,1510166692.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:52.474Z,1510166692.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:52.496Z,1510166692.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:52.872Z,1510166692.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:52.888Z,1510166692.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:53.279Z,1510166693.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:53.295Z,1510166693.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:53.666Z,1510166693.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:53.683Z,1510166693.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:54.065Z,1510166694.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:54.082Z,1510166694.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:54.467Z,1510166694.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:54.483Z,1510166694.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:54.855Z,1510166694.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:54.882Z,1510166694.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:55.275Z,1510166695.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:55.302Z,1510166695.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:55.670Z,1510166695.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:55.704Z,1510166695.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:56.074Z,1510166696.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:56.104Z,1510166696.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:56.459Z,1510166696.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:56.522Z,1510166696.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:56.857Z,1510166696.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:56.874Z,1510166696.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:57.259Z,1510166697.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:57.276Z,1510166697.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:57.658Z,1510166697.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:57.674Z,1510166697.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:58.071Z,1510166698.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:58.101Z,1510166698.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:58.471Z,1510166698.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:58.500Z,1510166698.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:58.870Z,1510166698.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:58.900Z,1510166698.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:59.254Z,1510166699.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:59.270Z,1510166699.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:44:59.658Z,1510166699.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:44:59.675Z,1510166699.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:00.058Z,1510166700.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:00.074Z,1510166700.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:00.462Z,1510166700.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:00.478Z,1510166700.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:00.859Z,1510166700.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:00.875Z,1510166700.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:01.277Z,1510166701.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:01.307Z,1510166701.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:01.666Z,1510166701.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:01.703Z,1510166701.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:02.070Z,1510166702.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:02.101Z,1510166702.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:02.457Z,1510166702.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:02.473Z,1510166702.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:02.854Z,1510166702.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:02.870Z,1510166702.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:03.258Z,1510166703.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:03.276Z,1510166703.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:03.658Z,1510166703.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:03.676Z,1510166703.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:04.067Z,1510166704.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:04.109Z,1510166704.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:04.475Z,1510166704.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:04.509Z,1510166704.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:04.883Z,1510166704.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:04.919Z,1510166704.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:05.264Z,1510166705.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:05.281Z,1510166705.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:05.671Z,1510166705.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:05.687Z,1510166705.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:06.060Z,1510166706.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:06.076Z,1510166706.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:06.460Z,1510166706.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:06.477Z,1510166706.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:06.863Z,1510166706.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:06.880Z,1510166706.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:07.266Z,1510166707.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:07.286Z,1510166707.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:07.674Z,1510166707.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:07.690Z,1510166707.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:08.070Z,1510166708.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:08.087Z,1510166708.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:08.462Z,1510166708.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:08.523Z,1510166708.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:08.851Z,1510166708.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:08.881Z,1510166708.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:09.259Z,1510166709.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:09.282Z,1510166709.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:09.666Z,1510166709.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:09.715Z,1510166709.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:10.071Z,1510166710.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:10.087Z,1510166710.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:10.474Z,1510166710.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:10.531Z,1510166710.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:10.872Z,1510166710.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:10.891Z,1510166710.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:11.262Z,1510166711.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:11.280Z,1510166711.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:11.658Z,1510166711.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:11.686Z,1510166711.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:12.051Z,1510166712.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:12.068Z,1510166712.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:12.469Z,1510166712.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:12.502Z,1510166712.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:12.863Z,1510166712.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:12.900Z,1510166712.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:13.270Z,1510166713.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:13.303Z,1510166713.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:13.675Z,1510166713.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:13.711Z,1510166713.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:14.074Z,1510166714.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:14.106Z,1510166714.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:14.463Z,1510166714.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:14.484Z,1510166714.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:14.864Z,1510166714.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:14.911Z,1510166714.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:15.266Z,1510166715.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:15.282Z,1510166715.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:15.664Z,1510166715.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:15.680Z,1510166715.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:16.076Z,1510166716.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:16.121Z,1510166716.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:16.472Z,1510166716.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:16.520Z,1510166716.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:16.873Z,1510166716.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:16.889Z,1510166716.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:17.251Z,1510166717.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:17.277Z,1510166717.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:17.655Z,1510166717.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:17.681Z,1510166717.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:18.055Z,1510166718.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:18.084Z,1510166718.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:18.456Z,1510166718.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:18.482Z,1510166718.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:18.855Z,1510166718.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:18.925Z,1510166718.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:19.272Z,1510166719.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:19.343Z,1510166719.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:19.672Z,1510166719.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:19.688Z,1510166719.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:20.076Z,1510166720.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:20.092Z,1510166720.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:20.455Z,1510166720.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:20.486Z,1510166720.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:20.855Z,1510166720.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:20.881Z,1510166720.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:21.256Z,1510166721.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:21.292Z,1510166721.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:21.655Z,1510166721.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:21.686Z,1510166721.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:22.076Z,1510166722.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:22.092Z,1510166722.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:22.475Z,1510166722.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:22.492Z,1510166722.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:22.876Z,1510166722.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:22.892Z,1510166722.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:23.256Z,1510166723.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:23.287Z,1510166723.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:23.656Z,1510166723.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:23.687Z,1510166723.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:24.052Z,1510166724.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:24.080Z,1510166724.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:24.457Z,1510166724.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:24.491Z,1510166724.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:24.856Z,1510166724.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:24.888Z,1510166724.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:25.267Z,1510166725.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:25.300Z,1510166725.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:25.668Z,1510166725.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:25.704Z,1510166725.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:26.070Z,1510166726.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:26.102Z,1510166726.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:26.457Z,1510166726.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:26.506Z,1510166726.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:26.859Z,1510166726.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:26.880Z,1510166726.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:27.264Z,1510166727.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:27.281Z,1510166727.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:27.665Z,1510166727.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:27.682Z,1510166727.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:28.077Z,1510166728.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:28.105Z,1510166728.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:28.484Z,1510166728.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:28.529Z,1510166728.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:28.876Z,1510166728.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:28.893Z,1510166728.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:29.256Z,1510166729.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:29.278Z,1510166729.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:29.662Z,1510166729.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:29.678Z,1510166729.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:30.061Z,1510166730.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:30.078Z,1510166730.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:30.465Z,1510166730.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:30.487Z,1510166730.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:30.870Z,1510166730.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:30.954Z,1510166730.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:31.277Z,1510166731.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:31.372Z,1510166731.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:31.678Z,1510166731.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:31.694Z,1510166731.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:32.077Z,1510166732.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:32.135Z,1510166732.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:32.462Z,1510166732.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:32.491Z,1510166732.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:32.851Z,1510166732.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:32.897Z,1510166732.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:33.251Z,1510166733.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:33.288Z,1510166733.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:33.655Z,1510166733.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:33.690Z,1510166733.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:34.069Z,1510166734.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:34.096Z,1510166734.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:34.470Z,1510166734.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:34.495Z,1510166734.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:34.866Z,1510166734.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:34.897Z,1510166734.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:35.251Z,1510166735.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:35.267Z,1510166735.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:35.651Z,1510166735.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:35.671Z,1510166735.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:36.055Z,1510166736.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:36.076Z,1510166736.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:36.463Z,1510166736.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:36.479Z,1510166736.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:36.856Z,1510166736.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:36.872Z,1510166736.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:37.268Z,1510166737.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:37.300Z,1510166737.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:37.666Z,1510166737.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:37.682Z,1510166737.682 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:37.682Z,1510166737.682 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 107
2017-11-08T18:45:37.682Z,1510166737.682 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T18:45:37.684Z,1510166737.684 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:37.684Z,1510166737.684 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 107
2017-11-08T18:45:37.684Z,1510166737.684 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T18:45:37.716Z,1510166737.716 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:37.716Z,1510166737.716 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 107
2017-11-08T18:45:37.716Z,1510166737.716 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T18:45:37.797Z,1510166737.797 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T18:45:37.797Z,1510166737.797 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T18:45:37.797Z,1510166737.797 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T18:45:38.062Z,1510166738.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:38.150Z,1510166738.150 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T18:45:38.150Z,1510166738.150 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 107
2017-11-08T18:45:38.150Z,1510166738.150 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T18:45:38.150Z,1510166738.150 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 107
2017-11-08T18:45:38.151Z,1510166738.151 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T18:45:38.151Z,1510166738.151 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 107
2017-11-08T18:45:38.458Z,1510166738.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:38.473Z,1510166738.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T18:45:38.474Z,1510166738.474 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:45:38.474Z,1510166738.474 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:45:38.474Z,1510166738.474 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T18:45:38.475Z,1510166738.475 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:45:38.475Z,1510166738.475 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:45:38.475Z,1510166738.475 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T18:45:38.476Z,1510166738.476 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:45:38.476Z,1510166738.476 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:45:38.865Z,1510166738.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:38.920Z,1510166738.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T18:45:38.923Z,1510166738.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:39.255Z,1510166739.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:39.276Z,1510166739.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T18:45:39.277Z,1510166739.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:39.660Z,1510166739.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:39.683Z,1510166739.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T18:45:39.684Z,1510166739.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:40.066Z,1510166740.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:40.081Z,1510166740.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T18:45:40.082Z,1510166740.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:40.466Z,1510166740.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:40.481Z,1510166740.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T18:45:40.482Z,1510166740.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:40.873Z,1510166740.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:40.889Z,1510166740.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T18:45:40.890Z,1510166740.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:41.262Z,1510166741.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:41.312Z,1510166741.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T18:45:41.313Z,1510166741.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:41.660Z,1510166741.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:41.676Z,1510166741.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T18:45:41.677Z,1510166741.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:42.064Z,1510166742.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:42.080Z,1510166742.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T18:45:42.081Z,1510166742.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:42.462Z,1510166742.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:42.478Z,1510166742.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T18:45:42.479Z,1510166742.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:42.862Z,1510166742.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:42.878Z,1510166742.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T18:45:42.879Z,1510166742.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:43.270Z,1510166743.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:43.286Z,1510166743.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T18:45:43.286Z,1510166743.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:43.671Z,1510166743.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:43.687Z,1510166743.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T18:45:43.688Z,1510166743.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:46.815Z,1510166746.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:46.832Z,1510166746.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T18:45:46.833Z,1510166746.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:46.943Z,1510166746.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:46.991Z,1510166746.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-11-08T18:45:46.992Z,1510166746.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:47.357Z,1510166747.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:47.373Z,1510166747.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-08T18:45:47.374Z,1510166747.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:47.744Z,1510166747.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:47.772Z,1510166747.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-08T18:45:47.773Z,1510166747.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:48.171Z,1510166748.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:48.196Z,1510166748.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-08T18:45:48.197Z,1510166748.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:48.575Z,1510166748.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:48.595Z,1510166748.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-08T18:45:48.596Z,1510166748.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:48.968Z,1510166748.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:48.991Z,1510166748.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-08T18:45:48.992Z,1510166748.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:49.348Z,1510166749.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:49.379Z,1510166749.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-08T18:45:49.380Z,1510166749.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:49.744Z,1510166749.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:49.781Z,1510166749.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T18:45:49.782Z,1510166749.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:50.144Z,1510166750.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:50.175Z,1510166750.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-08T18:45:50.176Z,1510166750.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:50.548Z,1510166750.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:50.590Z,1510166750.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T18:45:50.591Z,1510166750.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:50.950Z,1510166750.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:50.991Z,1510166750.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T18:45:50.993Z,1510166750.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:51.362Z,1510166751.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:51.398Z,1510166751.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T18:45:51.399Z,1510166751.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:51.762Z,1510166751.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:51.785Z,1510166751.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T18:45:51.786Z,1510166751.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:52.165Z,1510166752.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:52.192Z,1510166752.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T18:45:52.193Z,1510166752.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:52.548Z,1510166752.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:52.565Z,1510166752.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T18:45:52.565Z,1510166752.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:52.952Z,1510166752.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:52.968Z,1510166752.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T18:45:52.970Z,1510166752.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:53.351Z,1510166753.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:53.435Z,1510166753.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-11-08T18:45:53.436Z,1510166753.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:53.749Z,1510166753.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:53.765Z,1510166753.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T18:45:53.766Z,1510166753.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:54.162Z,1510166754.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:54.219Z,1510166754.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T18:45:54.220Z,1510166754.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:54.558Z,1510166754.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:54.574Z,1510166754.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T18:45:54.575Z,1510166754.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:54.955Z,1510166754.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:55.014Z,1510166755.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T18:45:55.015Z,1510166755.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:55.352Z,1510166755.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:55.381Z,1510166755.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T18:45:55.382Z,1510166755.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:55.754Z,1510166755.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:55.770Z,1510166755.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T18:45:55.771Z,1510166755.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:56.148Z,1510166756.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:56.178Z,1510166756.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T18:45:56.179Z,1510166756.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:56.554Z,1510166756.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:56.571Z,1510166756.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T18:45:56.572Z,1510166756.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:56.951Z,1510166756.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:56.966Z,1510166756.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T18:45:56.967Z,1510166756.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:57.358Z,1510166757.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:57.374Z,1510166757.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-08T18:45:57.375Z,1510166757.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:57.762Z,1510166757.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:57.779Z,1510166757.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:58.161Z,1510166758.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:58.183Z,1510166758.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:58.557Z,1510166758.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:58.574Z,1510166758.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:58.953Z,1510166758.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:58.974Z,1510166758.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:59.351Z,1510166759.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:59.367Z,1510166759.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:45:59.746Z,1510166759.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:45:59.772Z,1510166759.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:00.163Z,1510166760.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:00.179Z,1510166760.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:00.564Z,1510166760.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:00.580Z,1510166760.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:00.963Z,1510166760.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:00.980Z,1510166760.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:01.353Z,1510166761.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:01.371Z,1510166761.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:01.750Z,1510166761.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:01.773Z,1510166761.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:02.147Z,1510166762.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:02.180Z,1510166762.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:02.554Z,1510166762.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:02.571Z,1510166762.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:02.950Z,1510166762.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:02.972Z,1510166762.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:03.363Z,1510166763.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:03.416Z,1510166763.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:03.762Z,1510166763.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:03.784Z,1510166763.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:04.163Z,1510166764.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:04.179Z,1510166764.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:04.560Z,1510166764.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:04.584Z,1510166764.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:04.960Z,1510166764.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:04.977Z,1510166764.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:05.357Z,1510166765.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:05.373Z,1510166765.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:05.744Z,1510166765.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:05.770Z,1510166765.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:06.158Z,1510166766.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:06.175Z,1510166766.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:06.561Z,1510166766.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:06.579Z,1510166766.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:06.955Z,1510166766.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:06.976Z,1510166766.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:07.353Z,1510166767.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:07.370Z,1510166767.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:07.754Z,1510166767.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:07.770Z,1510166767.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:08.146Z,1510166768.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:08.175Z,1510166768.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:08.553Z,1510166768.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:08.570Z,1510166768.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:08.950Z,1510166768.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:08.966Z,1510166768.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:09.358Z,1510166769.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:09.375Z,1510166769.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:09.763Z,1510166769.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:09.780Z,1510166769.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:10.165Z,1510166770.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:10.182Z,1510166770.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:10.550Z,1510166770.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:10.567Z,1510166770.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:10.952Z,1510166770.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:10.973Z,1510166770.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:11.355Z,1510166771.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:11.376Z,1510166771.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:11.755Z,1510166771.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:11.772Z,1510166771.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:12.162Z,1510166772.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:12.179Z,1510166772.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:12.562Z,1510166772.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:12.583Z,1510166772.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:12.959Z,1510166772.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:12.975Z,1510166772.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:13.353Z,1510166773.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:13.370Z,1510166773.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:13.751Z,1510166773.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:13.768Z,1510166773.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:14.153Z,1510166774.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:14.171Z,1510166774.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:14.552Z,1510166774.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:14.574Z,1510166774.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:14.954Z,1510166774.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:14.971Z,1510166774.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:15.362Z,1510166775.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:15.427Z,1510166775.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:15.762Z,1510166775.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:15.831Z,1510166775.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:16.167Z,1510166776.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:16.184Z,1510166776.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:16.554Z,1510166776.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:16.611Z,1510166776.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:16.953Z,1510166776.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:16.974Z,1510166776.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:17.353Z,1510166777.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:17.407Z,1510166777.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:17.743Z,1510166777.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:17.783Z,1510166777.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:18.164Z,1510166778.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:18.181Z,1510166778.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:18.567Z,1510166778.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:18.583Z,1510166778.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:18.958Z,1510166778.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:18.989Z,1510166778.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:19.343Z,1510166779.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:19.373Z,1510166779.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:19.751Z,1510166779.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:19.785Z,1510166779.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:20.143Z,1510166780.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:20.179Z,1510166780.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:20.554Z,1510166780.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:20.570Z,1510166780.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:20.951Z,1510166780.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:20.986Z,1510166780.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:21.363Z,1510166781.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:21.380Z,1510166781.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:21.766Z,1510166781.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:21.782Z,1510166781.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:22.168Z,1510166782.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:22.185Z,1510166782.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:22.553Z,1510166782.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:22.570Z,1510166782.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:22.953Z,1510166782.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:22.970Z,1510166782.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:23.352Z,1510166783.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:23.368Z,1510166783.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:23.743Z,1510166783.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:23.769Z,1510166783.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:24.153Z,1510166784.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:24.185Z,1510166784.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:24.564Z,1510166784.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:24.588Z,1510166784.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:24.958Z,1510166784.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:24.978Z,1510166784.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:25.353Z,1510166785.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:25.370Z,1510166785.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:25.762Z,1510166785.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:25.815Z,1510166785.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:26.156Z,1510166786.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:26.173Z,1510166786.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:26.556Z,1510166786.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:26.584Z,1510166786.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:26.949Z,1510166786.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:26.985Z,1510166786.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:27.366Z,1510166787.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:27.388Z,1510166787.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:27.767Z,1510166787.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:27.787Z,1510166787.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:28.168Z,1510166788.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:28.191Z,1510166788.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:28.543Z,1510166788.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:28.580Z,1510166788.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:28.943Z,1510166788.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:28.959Z,1510166788.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:29.349Z,1510166789.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:29.385Z,1510166789.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:29.743Z,1510166789.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:29.763Z,1510166789.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:30.157Z,1510166790.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:30.190Z,1510166790.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:30.561Z,1510166790.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:30.589Z,1510166790.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:30.954Z,1510166790.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:30.990Z,1510166790.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:31.343Z,1510166791.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:31.359Z,1510166791.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:31.748Z,1510166791.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:31.764Z,1510166791.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:32.146Z,1510166792.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:32.163Z,1510166792.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:32.552Z,1510166792.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:32.586Z,1510166792.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:32.950Z,1510166792.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:32.967Z,1510166792.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:33.362Z,1510166793.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:33.387Z,1510166793.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:33.765Z,1510166793.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:33.790Z,1510166793.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:34.162Z,1510166794.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:34.184Z,1510166794.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:34.551Z,1510166794.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:34.590Z,1510166794.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:34.947Z,1510166794.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:34.963Z,1510166794.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:35.352Z,1510166795.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:35.368Z,1510166795.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:35.751Z,1510166795.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:35.767Z,1510166795.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:36.164Z,1510166796.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:36.198Z,1510166796.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:36.570Z,1510166796.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:36.595Z,1510166796.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:36.966Z,1510166796.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:36.000Z,1510166797.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:37.352Z,1510166797.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:37.371Z,1510166797.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:37.752Z,1510166797.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:37.768Z,1510166797.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:38.151Z,1510166798.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:38.246Z,1510166798.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:38.555Z,1510166798.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:38.584Z,1510166798.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:38.955Z,1510166798.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:39.010Z,1510166799.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:39.359Z,1510166799.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:39.376Z,1510166799.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:39.762Z,1510166799.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:39.825Z,1510166799.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:40.165Z,1510166800.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:40.181Z,1510166800.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:40.555Z,1510166800.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:40.573Z,1510166800.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:40.953Z,1510166800.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:40.970Z,1510166800.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:41.355Z,1510166801.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:41.372Z,1510166801.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:41.750Z,1510166801.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:41.766Z,1510166801.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:42.161Z,1510166802.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:42.178Z,1510166802.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:42.562Z,1510166802.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:42.578Z,1510166802.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:42.582Z,1510166802.582 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T18:41:42.3Z
2017-11-08T18:46:42.582Z,1510166802.582 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T18:46:42.582Z,1510166802.582 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T18:46:42.962Z,1510166802.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:42.979Z,1510166802.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:43.666Z,1510166803.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:43.688Z,1510166803.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:46.809Z,1510166806.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:46.826Z,1510166806.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:46.939Z,1510166806.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:46.983Z,1510166806.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:47.321Z,1510166807.321 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171108T132236/Courier0076.lzma
2017-11-08T18:46:47.368Z,1510166807.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:47.391Z,1510166807.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:47.759Z,1510166807.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:47.776Z,1510166807.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:48.163Z,1510166808.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:48.211Z,1510166808.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:48.518Z,1510166808.518 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0076.lzma.bak
2017-11-08T18:46:48.518Z,1510166808.518 [DataOverHttps](INFO): SBD MOMSN=5223250
2017-11-08T18:46:48.564Z,1510166808.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:48.581Z,1510166808.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:49.519Z,1510166809.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:49.536Z,1510166809.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:49.675Z,1510166809.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:49.718Z,1510166809.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:50.086Z,1510166810.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:50.113Z,1510166810.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:53.362Z,1510166813.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:53.380Z,1510166813.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:53.520Z,1510166813.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:53.560Z,1510166813.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:53.907Z,1510166813.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:53.962Z,1510166813.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:54.296Z,1510166814.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:54.340Z,1510166814.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:54.699Z,1510166814.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:54.720Z,1510166814.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:55.122Z,1510166815.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:55.153Z,1510166815.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:58.603Z,1510166818.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:58.620Z,1510166818.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:58.726Z,1510166818.726 [DataOverHttps](INFO): Sending 220 bytes from file Logs/20171108T132236/Express0077.lzma
2017-11-08T18:46:58.788Z,1510166818.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:58.804Z,1510166818.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:59.154Z,1510166819.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:59.196Z,1510166819.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:46:59.526Z,1510166819.526 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0077.lzma.bak
2017-11-08T18:46:59.526Z,1510166819.526 [DataOverHttps](INFO): SBD MOMSN=5223253
2017-11-08T18:46:59.577Z,1510166819.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:46:59.638Z,1510166819.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:00.531Z,1510166820.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:00.615Z,1510166820.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:00.619Z,1510166820.619 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T18:47:00.619Z,1510166820.619 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T18:47:00.619Z,1510166820.619 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T18:47:00.731Z,1510166820.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:00.777Z,1510166820.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:04.539Z,1510166824.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:04.581Z,1510166824.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:04.715Z,1510166824.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:04.748Z,1510166824.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:05.123Z,1510166825.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:05.186Z,1510166825.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:05.498Z,1510166825.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:05.532Z,1510166825.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:05.900Z,1510166825.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:05.938Z,1510166825.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:06.299Z,1510166826.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:06.345Z,1510166826.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:06.712Z,1510166826.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:06.742Z,1510166826.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:07.114Z,1510166827.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:07.148Z,1510166827.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:07.511Z,1510166827.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:07.550Z,1510166827.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:07.895Z,1510166827.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:07.913Z,1510166827.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:08.299Z,1510166828.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:08.318Z,1510166828.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:08.748Z,1510166828.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:08.771Z,1510166828.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:09.098Z,1510166829.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:09.166Z,1510166829.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:09.525Z,1510166829.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:09.582Z,1510166829.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:09.903Z,1510166829.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:09.946Z,1510166829.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:10.311Z,1510166830.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:10.329Z,1510166830.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:10.699Z,1510166830.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:10.716Z,1510166830.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:11.096Z,1510166831.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:11.128Z,1510166831.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:11.498Z,1510166831.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:11.519Z,1510166831.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:11.912Z,1510166831.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:11.933Z,1510166831.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:12.312Z,1510166832.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:12.341Z,1510166832.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:12.710Z,1510166832.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:12.726Z,1510166832.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:13.101Z,1510166833.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:13.119Z,1510166833.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:13.488Z,1510166833.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:13.550Z,1510166833.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:13.889Z,1510166833.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:13.920Z,1510166833.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:14.287Z,1510166834.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:14.319Z,1510166834.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:14.713Z,1510166834.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:14.729Z,1510166834.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:15.120Z,1510166835.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:15.141Z,1510166835.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:15.514Z,1510166835.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:15.542Z,1510166835.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:15.900Z,1510166835.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:15.918Z,1510166835.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:16.304Z,1510166836.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:16.321Z,1510166836.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:16.702Z,1510166836.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:16.724Z,1510166836.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:17.102Z,1510166837.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:17.128Z,1510166837.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:17.503Z,1510166837.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:17.524Z,1510166837.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:17.912Z,1510166837.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:17.931Z,1510166837.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:18.315Z,1510166838.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:18.336Z,1510166838.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:18.715Z,1510166838.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:18.733Z,1510166838.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:19.091Z,1510166839.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:19.124Z,1510166839.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:19.493Z,1510166839.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:19.526Z,1510166839.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:19.895Z,1510166839.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:19.922Z,1510166839.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:20.295Z,1510166840.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:20.324Z,1510166840.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:20.721Z,1510166840.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:20.743Z,1510166840.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:21.111Z,1510166841.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:21.137Z,1510166841.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:21.511Z,1510166841.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:21.539Z,1510166841.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:21.895Z,1510166841.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:21.944Z,1510166841.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:22.302Z,1510166842.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:22.318Z,1510166842.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:22.697Z,1510166842.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:22.713Z,1510166842.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:23.097Z,1510166843.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:23.117Z,1510166843.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:23.501Z,1510166843.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:23.525Z,1510166843.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:23.913Z,1510166843.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:23.930Z,1510166843.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:24.313Z,1510166844.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:24.338Z,1510166844.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:24.707Z,1510166844.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:24.739Z,1510166844.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:25.094Z,1510166845.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:25.110Z,1510166845.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:25.495Z,1510166845.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:25.592Z,1510166845.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:25.898Z,1510166845.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:25.914Z,1510166845.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:26.297Z,1510166846.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:26.355Z,1510166846.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:26.734Z,1510166846.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:26.751Z,1510166846.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:27.105Z,1510166847.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:27.146Z,1510166847.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:27.506Z,1510166847.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:27.522Z,1510166847.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:27.898Z,1510166847.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:27.914Z,1510166847.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:28.294Z,1510166848.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:28.309Z,1510166848.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:28.697Z,1510166848.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:28.713Z,1510166848.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:29.097Z,1510166849.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:29.117Z,1510166849.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:29.494Z,1510166849.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:29.515Z,1510166849.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:29.906Z,1510166849.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:29.922Z,1510166849.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:30.306Z,1510166850.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:30.322Z,1510166850.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:30.701Z,1510166850.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:30.723Z,1510166850.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:31.097Z,1510166851.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:31.114Z,1510166851.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:31.496Z,1510166851.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:31.512Z,1510166851.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:31.895Z,1510166851.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:31.911Z,1510166851.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:32.296Z,1510166852.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:32.312Z,1510166852.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:32.702Z,1510166852.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:32.718Z,1510166852.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:33.101Z,1510166853.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:33.123Z,1510166853.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:33.506Z,1510166853.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:33.522Z,1510166853.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:33.896Z,1510166853.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:33.912Z,1510166853.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:34.294Z,1510166854.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:34.315Z,1510166854.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:34.697Z,1510166854.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:34.713Z,1510166854.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:35.096Z,1510166855.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:35.113Z,1510166855.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:35.494Z,1510166855.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:35.544Z,1510166855.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:35.906Z,1510166855.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:35.922Z,1510166855.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:36.306Z,1510166856.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:36.322Z,1510166856.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:36.702Z,1510166856.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:36.718Z,1510166856.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:37.096Z,1510166857.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:37.113Z,1510166857.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:37.497Z,1510166857.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:37.513Z,1510166857.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:37.895Z,1510166857.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:37.915Z,1510166857.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:38.297Z,1510166858.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:38.313Z,1510166858.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:38.702Z,1510166858.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:38.718Z,1510166858.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:39.101Z,1510166859.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:39.117Z,1510166859.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:39.506Z,1510166859.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:39.522Z,1510166859.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:39.897Z,1510166859.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:39.913Z,1510166859.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:40.296Z,1510166860.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:40.311Z,1510166860.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:40.697Z,1510166860.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:40.714Z,1510166860.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:41.096Z,1510166861.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:41.117Z,1510166861.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:41.496Z,1510166861.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:41.512Z,1510166861.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:41.906Z,1510166861.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:41.922Z,1510166861.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:42.306Z,1510166862.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:42.327Z,1510166862.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:42.712Z,1510166862.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:42.749Z,1510166862.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:43.098Z,1510166863.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:43.115Z,1510166863.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:43.494Z,1510166863.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:43.523Z,1510166863.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:43.897Z,1510166863.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:43.923Z,1510166863.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:44.297Z,1510166864.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:44.314Z,1510166864.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:44.702Z,1510166864.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:44.719Z,1510166864.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:45.106Z,1510166865.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:45.123Z,1510166865.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:45.503Z,1510166865.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:45.519Z,1510166865.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:45.613Z,1510166865.613 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:47:45.613Z,1510166865.613 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T18:47:45.749Z,1510166865.749 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:47:45.749Z,1510166865.749 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:47:45.749Z,1510166865.749 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:47:45.749Z,1510166865.749 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T18:47:45.749Z,1510166865.749 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:47:45.890Z,1510166865.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:45.919Z,1510166865.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:46.009Z,1510166866.009 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:47:46.153Z,1510166866.153 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:47:46.239Z,1510166866.239 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:47:46.304Z,1510166866.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:46.324Z,1510166866.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:46.699Z,1510166866.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:46.717Z,1510166866.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:47.097Z,1510166867.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:47.118Z,1510166867.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:47.498Z,1510166867.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:47.541Z,1510166867.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:47.636Z,1510166867.636 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:47:47.636Z,1510166867.636 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T18:47:47.853Z,1510166867.853 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:47:47.853Z,1510166867.853 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:47:47.853Z,1510166867.853 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:47:47.853Z,1510166867.853 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T18:47:47.854Z,1510166867.854 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:47:47.906Z,1510166867.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:47.968Z,1510166867.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:48.061Z,1510166868.061 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:47:48.257Z,1510166868.257 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:47:48.320Z,1510166868.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:48.360Z,1510166868.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:48.467Z,1510166868.467 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:47:48.711Z,1510166868.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:48.732Z,1510166868.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:49.091Z,1510166869.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:49.128Z,1510166869.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:49.491Z,1510166869.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:49.551Z,1510166869.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:49.892Z,1510166869.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:49.922Z,1510166869.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:50.001Z,1510166870.001 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:47:50.001Z,1510166870.001 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T18:47:50.081Z,1510166870.081 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:47:50.081Z,1510166870.081 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:47:50.081Z,1510166870.081 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:47:50.081Z,1510166870.081 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T18:47:50.081Z,1510166870.081 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:47:50.287Z,1510166870.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:50.354Z,1510166870.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:50.429Z,1510166870.429 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:47:50.485Z,1510166870.485 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:47:50.576Z,1510166870.576 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:47:50.714Z,1510166870.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:50.733Z,1510166870.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:51.112Z,1510166871.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:51.136Z,1510166871.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:51.508Z,1510166871.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:51.525Z,1510166871.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:51.891Z,1510166871.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:51.922Z,1510166871.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:52.002Z,1510166872.002 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:47:52.002Z,1510166872.002 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T18:47:52.194Z,1510166872.194 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:47:52.195Z,1510166872.195 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:47:52.195Z,1510166872.195 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:47:52.195Z,1510166872.195 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T18:47:52.195Z,1510166872.195 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:47:52.287Z,1510166872.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:52.313Z,1510166872.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:52.389Z,1510166872.389 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:47:52.597Z,1510166872.597 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:47:52.701Z,1510166872.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:52.728Z,1510166872.728 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:47:52.732Z,1510166872.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:53.092Z,1510166873.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:53.119Z,1510166873.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:53.491Z,1510166873.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:53.517Z,1510166873.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:53.906Z,1510166873.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:53.927Z,1510166873.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:54.002Z,1510166874.002 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:47:54.002Z,1510166874.002 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T18:47:54.311Z,1510166874.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:54.328Z,1510166874.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:54.353Z,1510166874.353 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:47:54.354Z,1510166874.354 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:47:54.354Z,1510166874.354 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:47:54.354Z,1510166874.354 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T18:47:54.354Z,1510166874.354 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:47:54.409Z,1510166874.409 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:47:54.409Z,1510166874.409 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:47:54.708Z,1510166874.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:54.732Z,1510166874.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:54.757Z,1510166874.757 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:47:54.890Z,1510166874.890 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:47:55.096Z,1510166875.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:55.115Z,1510166875.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:55.494Z,1510166875.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:55.511Z,1510166875.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:55.895Z,1510166875.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:55.911Z,1510166875.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:56.290Z,1510166876.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:56.307Z,1510166876.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:56.706Z,1510166876.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:56.740Z,1510166876.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:57.105Z,1510166877.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:57.143Z,1510166877.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:57.506Z,1510166877.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:57.539Z,1510166877.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:57.894Z,1510166877.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:57.911Z,1510166877.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:58.294Z,1510166878.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:58.310Z,1510166878.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:58.694Z,1510166878.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:58.752Z,1510166878.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:59.095Z,1510166879.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:59.116Z,1510166879.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:59.494Z,1510166879.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:59.510Z,1510166879.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:47:59.906Z,1510166879.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:47:59.922Z,1510166879.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:00.305Z,1510166880.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:00.322Z,1510166880.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:00.709Z,1510166880.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:00.747Z,1510166880.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:01.095Z,1510166881.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:01.116Z,1510166881.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:04.195Z,1510166884.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:04.211Z,1510166884.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:04.309Z,1510166884.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:04.355Z,1510166884.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:04.736Z,1510166884.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:04.753Z,1510166884.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:05.136Z,1510166885.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:05.152Z,1510166885.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:05.534Z,1510166885.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:05.555Z,1510166885.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:05.915Z,1510166885.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:05.948Z,1510166885.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:06.316Z,1510166886.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:06.351Z,1510166886.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:06.720Z,1510166886.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:06.750Z,1510166886.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:07.115Z,1510166887.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:07.150Z,1510166887.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:07.537Z,1510166887.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:07.554Z,1510166887.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:07.926Z,1510166887.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:07.959Z,1510166887.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:08.336Z,1510166888.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:08.353Z,1510166888.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:08.716Z,1510166888.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:08.751Z,1510166888.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:09.115Z,1510166889.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:09.151Z,1510166889.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:09.516Z,1510166889.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:09.553Z,1510166889.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:09.917Z,1510166889.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:09.957Z,1510166889.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:10.311Z,1510166890.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:10.328Z,1510166890.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:10.727Z,1510166890.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:10.838Z,1510166890.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:11.134Z,1510166891.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:11.161Z,1510166891.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:11.530Z,1510166891.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:11.587Z,1510166891.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:11.919Z,1510166891.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:11.935Z,1510166891.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:12.319Z,1510166892.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:12.379Z,1510166892.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:12.716Z,1510166892.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:12.762Z,1510166892.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:13.119Z,1510166893.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:13.134Z,1510166893.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:13.534Z,1510166893.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:13.564Z,1510166893.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:13.930Z,1510166893.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:13.963Z,1510166893.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:14.329Z,1510166894.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:14.355Z,1510166894.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:14.716Z,1510166894.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:14.732Z,1510166894.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:15.114Z,1510166895.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:15.131Z,1510166895.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:15.515Z,1510166895.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:15.530Z,1510166895.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:15.921Z,1510166895.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:15.957Z,1510166895.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:16.319Z,1510166896.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:16.336Z,1510166896.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:16.729Z,1510166896.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:16.761Z,1510166896.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:17.133Z,1510166897.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:17.161Z,1510166897.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:17.530Z,1510166897.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:17.562Z,1510166897.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:17.919Z,1510166897.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:17.935Z,1510166897.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:18.319Z,1510166898.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:18.336Z,1510166898.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:18.761Z,1510166898.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:18.781Z,1510166898.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:19.118Z,1510166899.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:19.134Z,1510166899.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:19.530Z,1510166899.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:19.562Z,1510166899.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:19.926Z,1510166899.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:19.942Z,1510166899.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:20.329Z,1510166900.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:20.345Z,1510166900.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:20.719Z,1510166900.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:20.779Z,1510166900.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:21.123Z,1510166901.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:21.144Z,1510166901.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:21.520Z,1510166901.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:21.536Z,1510166901.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:21.920Z,1510166901.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:21.936Z,1510166901.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:22.318Z,1510166902.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:22.334Z,1510166902.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:22.723Z,1510166902.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:22.743Z,1510166902.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:23.130Z,1510166903.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:23.168Z,1510166903.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:23.526Z,1510166903.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:23.543Z,1510166903.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:23.915Z,1510166903.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:23.941Z,1510166903.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:24.312Z,1510166904.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:24.349Z,1510166904.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:24.713Z,1510166904.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:24.749Z,1510166904.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:25.111Z,1510166905.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:25.153Z,1510166905.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:25.537Z,1510166905.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:25.554Z,1510166905.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:25.934Z,1510166905.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:25.956Z,1510166905.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:26.326Z,1510166906.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:26.353Z,1510166906.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:26.712Z,1510166906.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:26.737Z,1510166906.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:27.111Z,1510166907.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:27.128Z,1510166907.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:27.511Z,1510166907.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:27.527Z,1510166907.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:27.916Z,1510166907.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:27.955Z,1510166907.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:28.315Z,1510166908.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:28.352Z,1510166908.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:28.726Z,1510166908.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:28.755Z,1510166908.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:29.125Z,1510166909.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:29.162Z,1510166909.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:29.530Z,1510166909.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:29.562Z,1510166909.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:29.919Z,1510166909.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:29.935Z,1510166909.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:30.318Z,1510166910.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:30.334Z,1510166910.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:30.718Z,1510166910.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:30.740Z,1510166910.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:31.118Z,1510166911.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:31.134Z,1510166911.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:31.529Z,1510166911.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:31.564Z,1510166911.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:31.930Z,1510166911.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:31.966Z,1510166911.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:32.329Z,1510166912.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:32.370Z,1510166912.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:32.718Z,1510166912.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:32.797Z,1510166912.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:33.121Z,1510166913.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:33.195Z,1510166913.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:33.519Z,1510166913.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:33.540Z,1510166913.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:33.923Z,1510166913.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:33.939Z,1510166913.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:34.315Z,1510166914.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:34.366Z,1510166914.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:34.730Z,1510166914.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:34.751Z,1510166914.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:35.130Z,1510166915.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:35.174Z,1510166915.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:35.530Z,1510166915.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:35.552Z,1510166915.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:35.919Z,1510166915.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:35.949Z,1510166915.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:36.317Z,1510166916.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:36.333Z,1510166916.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:36.720Z,1510166916.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:36.741Z,1510166916.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:37.121Z,1510166917.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:37.136Z,1510166917.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:37.531Z,1510166917.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:37.551Z,1510166917.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:37.930Z,1510166917.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:37.951Z,1510166917.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:38.330Z,1510166918.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:38.346Z,1510166918.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:38.722Z,1510166918.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:38.737Z,1510166918.737 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:38.737Z,1510166918.737 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 108
2017-11-08T18:48:38.738Z,1510166918.738 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T18:48:38.739Z,1510166918.739 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:38.739Z,1510166918.739 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 108
2017-11-08T18:48:38.739Z,1510166918.739 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T18:48:38.741Z,1510166918.741 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:38.741Z,1510166918.741 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 108
2017-11-08T18:48:38.741Z,1510166918.741 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T18:48:38.821Z,1510166918.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T18:48:38.821Z,1510166918.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T18:48:38.821Z,1510166918.821 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T18:48:39.119Z,1510166919.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:39.221Z,1510166919.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T18:48:39.221Z,1510166919.221 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 108
2017-11-08T18:48:39.221Z,1510166919.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T18:48:39.221Z,1510166919.221 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 108
2017-11-08T18:48:39.222Z,1510166919.222 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T18:48:39.222Z,1510166919.222 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 108
2017-11-08T18:48:39.511Z,1510166919.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:39.542Z,1510166919.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T18:48:39.543Z,1510166919.543 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:48:39.543Z,1510166919.543 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:48:39.543Z,1510166919.543 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T18:48:39.544Z,1510166919.544 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:48:39.544Z,1510166919.544 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:48:39.545Z,1510166919.545 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T18:48:39.545Z,1510166919.545 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:48:39.545Z,1510166919.545 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:48:39.912Z,1510166919.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:39.944Z,1510166919.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T18:48:39.945Z,1510166919.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:40.315Z,1510166920.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:40.345Z,1510166920.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T18:48:40.346Z,1510166920.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:40.731Z,1510166920.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:40.747Z,1510166920.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T18:48:40.748Z,1510166920.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:41.132Z,1510166921.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:41.147Z,1510166921.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T18:48:41.148Z,1510166921.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:41.535Z,1510166921.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:41.551Z,1510166921.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T18:48:41.552Z,1510166921.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:41.915Z,1510166921.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:41.947Z,1510166921.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T18:48:41.948Z,1510166921.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:42.311Z,1510166922.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:42.340Z,1510166922.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T18:48:42.341Z,1510166922.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:42.725Z,1510166922.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:42.749Z,1510166922.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T18:48:42.750Z,1510166922.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:43.117Z,1510166923.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:43.168Z,1510166923.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T18:48:43.173Z,1510166923.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:43.533Z,1510166923.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:43.587Z,1510166923.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T18:48:43.588Z,1510166923.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:43.937Z,1510166923.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:43.965Z,1510166923.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T18:48:43.966Z,1510166923.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:44.326Z,1510166924.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:44.355Z,1510166924.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T18:48:44.356Z,1510166924.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:44.719Z,1510166924.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:44.749Z,1510166924.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T18:48:44.750Z,1510166924.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:45.115Z,1510166925.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:45.147Z,1510166925.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T18:48:45.148Z,1510166925.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:45.515Z,1510166925.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:45.551Z,1510166925.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T18:48:45.552Z,1510166925.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:45.913Z,1510166925.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:45.928Z,1510166925.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T18:48:45.929Z,1510166925.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:46.316Z,1510166926.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:46.332Z,1510166926.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T18:48:46.333Z,1510166926.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:46.733Z,1510166926.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:46.767Z,1510166926.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T18:48:46.768Z,1510166926.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:47.125Z,1510166927.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:47.157Z,1510166927.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T18:48:47.158Z,1510166927.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:47.530Z,1510166927.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:47.562Z,1510166927.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T18:48:47.562Z,1510166927.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:47.919Z,1510166927.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:47.935Z,1510166927.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T18:48:47.936Z,1510166927.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:48.317Z,1510166928.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:48.333Z,1510166928.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T18:48:48.334Z,1510166928.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:48.719Z,1510166928.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:48.743Z,1510166928.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T18:48:48.744Z,1510166928.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:49.120Z,1510166929.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:49.143Z,1510166929.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T18:48:49.144Z,1510166929.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:49.530Z,1510166929.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:49.546Z,1510166929.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T18:48:49.547Z,1510166929.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:49.930Z,1510166929.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:49.951Z,1510166929.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T18:48:49.952Z,1510166929.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:50.326Z,1510166930.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:50.344Z,1510166930.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T18:48:50.345Z,1510166930.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:50.722Z,1510166930.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:50.737Z,1510166930.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T18:48:50.738Z,1510166930.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:51.122Z,1510166931.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:51.137Z,1510166931.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T18:48:51.138Z,1510166931.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:51.524Z,1510166931.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:51.540Z,1510166931.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T18:48:51.541Z,1510166931.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:51.923Z,1510166931.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:51.939Z,1510166931.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T18:48:51.940Z,1510166931.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:52.322Z,1510166932.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:52.338Z,1510166932.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T18:48:52.339Z,1510166932.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:52.733Z,1510166932.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:52.749Z,1510166932.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T18:48:52.750Z,1510166932.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:53.132Z,1510166933.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:53.147Z,1510166933.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T18:48:53.148Z,1510166933.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:53.530Z,1510166933.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:53.551Z,1510166933.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T18:48:53.552Z,1510166933.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:53.925Z,1510166933.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:53.947Z,1510166933.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T18:48:53.948Z,1510166933.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:54.318Z,1510166934.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:54.339Z,1510166934.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T18:48:54.340Z,1510166934.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:54.724Z,1510166934.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:54.740Z,1510166934.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T18:48:54.741Z,1510166934.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:55.119Z,1510166935.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:55.139Z,1510166935.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T18:48:55.141Z,1510166935.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:55.531Z,1510166935.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:55.601Z,1510166935.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T18:48:55.602Z,1510166935.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:55.931Z,1510166935.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:56.007Z,1510166936.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T18:48:56.008Z,1510166936.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:56.330Z,1510166936.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:56.346Z,1510166936.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T18:48:56.347Z,1510166936.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:56.729Z,1510166936.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:56.745Z,1510166936.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T18:48:56.746Z,1510166936.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:57.125Z,1510166937.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:57.183Z,1510166937.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T18:48:57.184Z,1510166937.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:57.521Z,1510166937.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:57.537Z,1510166937.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T18:48:57.538Z,1510166937.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:57.912Z,1510166937.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:57.966Z,1510166937.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T18:48:57.969Z,1510166937.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:58.327Z,1510166938.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:58.343Z,1510166938.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T18:48:58.344Z,1510166938.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:58.737Z,1510166938.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:58.756Z,1510166938.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:59.132Z,1510166939.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:59.148Z,1510166939.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:59.535Z,1510166939.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:59.556Z,1510166939.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:48:59.923Z,1510166939.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:48:59.949Z,1510166939.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:00.328Z,1510166940.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:00.344Z,1510166940.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:00.725Z,1510166940.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:00.748Z,1510166940.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:01.126Z,1510166941.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:01.151Z,1510166941.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:01.536Z,1510166941.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:01.553Z,1510166941.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:04.858Z,1510166944.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:04.882Z,1510166944.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:05.034Z,1510166945.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:05.097Z,1510166945.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:05.423Z,1510166945.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:05.475Z,1510166945.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:05.813Z,1510166945.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:05.829Z,1510166945.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:06.210Z,1510166946.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:06.257Z,1510166946.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:06.621Z,1510166946.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:06.659Z,1510166946.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:07.022Z,1510166947.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:07.054Z,1510166947.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:07.421Z,1510166947.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:07.459Z,1510166947.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:07.810Z,1510166947.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:07.831Z,1510166947.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:08.213Z,1510166948.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:08.229Z,1510166948.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:08.614Z,1510166948.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:08.630Z,1510166948.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:09.010Z,1510166949.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:09.031Z,1510166949.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:09.426Z,1510166949.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:09.460Z,1510166949.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:09.821Z,1510166949.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:09.837Z,1510166949.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:10.221Z,1510166950.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:10.237Z,1510166950.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:10.613Z,1510166950.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:10.631Z,1510166950.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:11.013Z,1510166951.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:11.029Z,1510166951.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:11.410Z,1510166951.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:11.426Z,1510166951.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:11.819Z,1510166951.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:11.840Z,1510166951.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:12.221Z,1510166952.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:12.237Z,1510166952.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:12.619Z,1510166952.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:12.635Z,1510166952.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:13.014Z,1510166953.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:13.030Z,1510166953.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:13.423Z,1510166953.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:13.439Z,1510166953.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:13.816Z,1510166953.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:13.832Z,1510166953.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:14.214Z,1510166954.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:14.231Z,1510166954.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:14.620Z,1510166954.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:14.636Z,1510166954.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:15.021Z,1510166955.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:15.037Z,1510166955.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:15.422Z,1510166955.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:15.444Z,1510166955.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:15.814Z,1510166955.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:15.835Z,1510166955.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:16.211Z,1510166956.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:16.239Z,1510166956.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:16.611Z,1510166956.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:16.640Z,1510166956.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:17.023Z,1510166957.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:17.043Z,1510166957.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:17.416Z,1510166957.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:17.432Z,1510166957.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:17.823Z,1510166957.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:17.848Z,1510166957.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:18.223Z,1510166958.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:18.294Z,1510166958.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:18.623Z,1510166958.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:18.696Z,1510166958.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:19.014Z,1510166959.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:19.030Z,1510166959.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:19.411Z,1510166959.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:19.433Z,1510166959.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:19.804Z,1510166959.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:19.870Z,1510166959.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:20.214Z,1510166960.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:20.230Z,1510166960.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:20.624Z,1510166960.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:20.678Z,1510166960.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:21.024Z,1510166961.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:21.040Z,1510166961.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:21.427Z,1510166961.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:21.448Z,1510166961.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:21.811Z,1510166961.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:21.833Z,1510166961.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:22.203Z,1510166962.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:22.229Z,1510166962.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:22.614Z,1510166962.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:22.630Z,1510166962.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:23.015Z,1510166963.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:23.031Z,1510166963.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:23.414Z,1510166963.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:23.431Z,1510166963.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:23.827Z,1510166963.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:23.848Z,1510166963.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:24.226Z,1510166964.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:24.242Z,1510166964.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:24.624Z,1510166964.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:24.640Z,1510166964.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:25.014Z,1510166965.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:25.035Z,1510166965.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:25.411Z,1510166965.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:25.440Z,1510166965.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:25.804Z,1510166965.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:25.838Z,1510166965.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:26.207Z,1510166966.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:26.236Z,1510166966.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:26.623Z,1510166966.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:26.640Z,1510166966.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:27.024Z,1510166967.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:27.040Z,1510166967.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:27.428Z,1510166967.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:27.448Z,1510166967.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:27.807Z,1510166967.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:27.833Z,1510166967.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:28.203Z,1510166968.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:28.238Z,1510166968.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:28.611Z,1510166968.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:28.640Z,1510166968.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:29.006Z,1510166969.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:29.053Z,1510166969.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:29.406Z,1510166969.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:29.438Z,1510166969.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:29.827Z,1510166969.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:29.844Z,1510166969.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:30.227Z,1510166970.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:30.256Z,1510166970.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:30.618Z,1510166970.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:30.657Z,1510166970.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:31.008Z,1510166971.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:31.024Z,1510166971.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:31.407Z,1510166971.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:31.448Z,1510166971.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:31.814Z,1510166971.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:31.830Z,1510166971.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:32.207Z,1510166972.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:32.224Z,1510166972.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:32.628Z,1510166972.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:32.660Z,1510166972.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:33.026Z,1510166973.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:33.058Z,1510166973.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:33.418Z,1510166973.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:33.434Z,1510166973.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:33.810Z,1510166973.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:33.827Z,1510166973.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:34.215Z,1510166974.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:34.231Z,1510166974.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:34.609Z,1510166974.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:34.625Z,1510166974.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:35.011Z,1510166975.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:35.035Z,1510166975.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:35.410Z,1510166975.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:35.427Z,1510166975.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:35.822Z,1510166975.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:35.855Z,1510166975.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:36.226Z,1510166976.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:36.262Z,1510166976.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:36.618Z,1510166976.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:36.635Z,1510166976.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:37.013Z,1510166977.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:37.029Z,1510166977.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:37.413Z,1510166977.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:37.429Z,1510166977.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:37.814Z,1510166977.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:37.833Z,1510166977.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:38.213Z,1510166978.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:38.229Z,1510166978.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:38.618Z,1510166978.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:38.635Z,1510166978.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:39.021Z,1510166979.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:39.037Z,1510166979.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:39.418Z,1510166979.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:39.435Z,1510166979.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:39.813Z,1510166979.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:39.829Z,1510166979.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:40.210Z,1510166980.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:40.226Z,1510166980.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:40.613Z,1510166980.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:40.683Z,1510166980.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:41.014Z,1510166981.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:41.087Z,1510166981.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:41.414Z,1510166981.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:41.430Z,1510166981.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:41.823Z,1510166981.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:41.876Z,1510166981.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:42.223Z,1510166982.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:42.243Z,1510166982.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:42.623Z,1510166982.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:42.670Z,1510166982.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:43.014Z,1510166983.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:43.030Z,1510166983.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:43.411Z,1510166983.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:43.432Z,1510166983.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:43.814Z,1510166983.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:43.840Z,1510166983.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:44.206Z,1510166984.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:44.236Z,1510166984.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:44.631Z,1510166984.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:44.648Z,1510166984.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:45.025Z,1510166985.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:45.047Z,1510166985.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:45.420Z,1510166985.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:45.436Z,1510166985.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:45.811Z,1510166985.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:45.848Z,1510166985.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:46.214Z,1510166986.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:46.230Z,1510166986.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:46.609Z,1510166986.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:46.626Z,1510166986.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:47.014Z,1510166987.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:47.035Z,1510166987.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:47.414Z,1510166987.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:47.430Z,1510166987.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:47.820Z,1510166987.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:47.836Z,1510166987.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:48.222Z,1510166988.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:48.240Z,1510166988.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:48.623Z,1510166988.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:48.639Z,1510166988.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:49.006Z,1510166989.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:49.029Z,1510166989.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:49.414Z,1510166989.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:49.430Z,1510166989.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:49.815Z,1510166989.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:49.831Z,1510166989.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:50.203Z,1510166990.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:50.234Z,1510166990.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:50.623Z,1510166990.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:50.640Z,1510166990.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:51.023Z,1510166991.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:51.070Z,1510166991.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:51.423Z,1510166991.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:51.439Z,1510166991.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:51.811Z,1510166991.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:51.832Z,1510166991.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:52.215Z,1510166992.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:52.231Z,1510166992.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:52.614Z,1510166992.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:52.636Z,1510166992.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:53.011Z,1510166993.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:53.034Z,1510166993.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:53.417Z,1510166993.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:53.433Z,1510166993.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:53.824Z,1510166993.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:53.840Z,1510166993.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:54.223Z,1510166994.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:54.244Z,1510166994.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:54.624Z,1510166994.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:54.640Z,1510166994.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:55.010Z,1510166995.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:55.031Z,1510166995.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:55.411Z,1510166995.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:55.433Z,1510166995.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:55.810Z,1510166995.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:55.826Z,1510166995.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:56.208Z,1510166996.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:56.242Z,1510166996.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:56.624Z,1510166996.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:56.641Z,1510166996.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:57.028Z,1510166997.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:57.045Z,1510166997.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:57.424Z,1510166997.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:57.441Z,1510166997.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:57.807Z,1510166997.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:57.842Z,1510166997.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:58.203Z,1510166998.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:58.229Z,1510166998.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:58.607Z,1510166998.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:58.640Z,1510166998.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:59.008Z,1510166999.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:59.040Z,1510166999.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:59.407Z,1510166999.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:59.433Z,1510166999.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:49:59.824Z,1510166999.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:49:59.841Z,1510166999.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:00.228Z,1510167000.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:00.289Z,1510167000.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:00.629Z,1510167000.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:00.651Z,1510167000.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:01.018Z,1510167001.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:01.039Z,1510167001.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:01.417Z,1510167001.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:01.441Z,1510167001.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:04.535Z,1510167004.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:04.618Z,1510167004.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:04.740Z,1510167004.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:04.780Z,1510167004.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:05.150Z,1510167005.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:05.202Z,1510167005.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:05.554Z,1510167005.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:05.579Z,1510167005.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:05.946Z,1510167005.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:05.996Z,1510167005.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:06.338Z,1510167006.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:06.355Z,1510167006.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:06.738Z,1510167006.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:06.755Z,1510167006.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:07.134Z,1510167007.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:07.150Z,1510167007.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:07.550Z,1510167007.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:07.588Z,1510167007.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:07.949Z,1510167007.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:07.982Z,1510167007.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:08.346Z,1510167008.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:08.378Z,1510167008.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:08.738Z,1510167008.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:08.754Z,1510167008.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:09.138Z,1510167009.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:09.153Z,1510167009.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:09.535Z,1510167009.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:09.556Z,1510167009.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:09.936Z,1510167009.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:09.952Z,1510167009.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:10.339Z,1510167010.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:10.355Z,1510167010.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:10.750Z,1510167010.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:10.785Z,1510167010.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:11.149Z,1510167011.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:11.180Z,1510167011.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:11.549Z,1510167011.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:11.581Z,1510167011.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:11.934Z,1510167011.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:11.950Z,1510167011.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:12.338Z,1510167012.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:12.354Z,1510167012.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:12.738Z,1510167012.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:12.754Z,1510167012.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:13.134Z,1510167013.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:13.150Z,1510167013.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:13.550Z,1510167013.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:13.582Z,1510167013.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:13.949Z,1510167013.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:13.985Z,1510167013.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:14.346Z,1510167014.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:14.401Z,1510167014.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:14.739Z,1510167014.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:14.758Z,1510167014.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:15.138Z,1510167015.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:15.154Z,1510167015.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:15.541Z,1510167015.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:15.557Z,1510167015.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:15.940Z,1510167015.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:15.960Z,1510167015.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:16.341Z,1510167016.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:16.356Z,1510167016.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:16.746Z,1510167016.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:16.763Z,1510167016.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:17.150Z,1510167017.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:17.166Z,1510167017.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:17.548Z,1510167017.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:17.564Z,1510167017.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:17.934Z,1510167017.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:17.963Z,1510167017.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:18.340Z,1510167018.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:18.389Z,1510167018.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:18.742Z,1510167018.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:18.763Z,1510167018.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:19.140Z,1510167019.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:19.156Z,1510167019.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:19.549Z,1510167019.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:19.565Z,1510167019.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:19.950Z,1510167019.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:19.000Z,1510167020.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:20.353Z,1510167020.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:20.384Z,1510167020.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:20.732Z,1510167020.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:20.767Z,1510167020.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:21.132Z,1510167021.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:21.166Z,1510167021.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:21.536Z,1510167021.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:21.563Z,1510167021.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:21.937Z,1510167021.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:21.962Z,1510167021.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:22.335Z,1510167022.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:22.367Z,1510167022.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:22.750Z,1510167022.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:22.781Z,1510167022.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:23.161Z,1510167023.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:23.177Z,1510167023.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:23.556Z,1510167023.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:23.581Z,1510167023.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:23.936Z,1510167023.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:23.952Z,1510167023.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:24.338Z,1510167024.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:24.354Z,1510167024.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:24.749Z,1510167024.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:24.794Z,1510167024.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:25.139Z,1510167025.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:25.207Z,1510167025.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:25.550Z,1510167025.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:25.567Z,1510167025.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:25.950Z,1510167025.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:25.966Z,1510167025.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:26.347Z,1510167026.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:26.363Z,1510167026.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:26.740Z,1510167026.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:26.814Z,1510167026.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:27.142Z,1510167027.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:27.158Z,1510167027.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:27.542Z,1510167027.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:27.564Z,1510167027.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:27.941Z,1510167027.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:28.003Z,1510167028.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:28.342Z,1510167028.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:28.357Z,1510167028.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:28.765Z,1510167028.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:28.819Z,1510167028.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:29.154Z,1510167029.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:29.170Z,1510167029.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:29.554Z,1510167029.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:29.570Z,1510167029.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:29.931Z,1510167029.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:29.962Z,1510167029.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:30.341Z,1510167030.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:30.357Z,1510167030.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:30.732Z,1510167030.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:30.763Z,1510167030.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:31.131Z,1510167031.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:31.168Z,1510167031.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:31.551Z,1510167031.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:31.575Z,1510167031.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:31.951Z,1510167031.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:31.971Z,1510167031.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:32.351Z,1510167032.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:32.368Z,1510167032.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:32.735Z,1510167032.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:32.766Z,1510167032.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:33.135Z,1510167033.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:33.160Z,1510167033.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:33.535Z,1510167033.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:33.571Z,1510167033.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:33.936Z,1510167033.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:33.964Z,1510167033.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:34.335Z,1510167034.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:34.360Z,1510167034.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:34.752Z,1510167034.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:34.769Z,1510167034.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:35.155Z,1510167035.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:35.176Z,1510167035.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:35.556Z,1510167035.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:35.575Z,1510167035.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:35.931Z,1510167035.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:35.956Z,1510167035.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:36.335Z,1510167036.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:36.371Z,1510167036.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:36.732Z,1510167036.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:36.757Z,1510167036.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:37.131Z,1510167037.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:37.188Z,1510167037.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:37.554Z,1510167037.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:37.581Z,1510167037.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:37.956Z,1510167037.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:37.979Z,1510167037.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:38.352Z,1510167038.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:38.368Z,1510167038.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:38.735Z,1510167038.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:38.766Z,1510167038.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:39.131Z,1510167039.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:39.156Z,1510167039.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:39.535Z,1510167039.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:39.567Z,1510167039.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:39.936Z,1510167039.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:39.964Z,1510167039.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:40.331Z,1510167040.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:40.357Z,1510167040.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:40.756Z,1510167040.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:40.772Z,1510167040.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:41.156Z,1510167041.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:41.175Z,1510167041.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:41.553Z,1510167041.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:41.569Z,1510167041.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:41.932Z,1510167041.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:41.971Z,1510167041.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:42.336Z,1510167042.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:42.366Z,1510167042.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:42.737Z,1510167042.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:42.767Z,1510167042.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:43.133Z,1510167043.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:43.174Z,1510167043.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:43.547Z,1510167043.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:43.579Z,1510167043.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:43.957Z,1510167043.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:43.981Z,1510167043.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:44.370Z,1510167044.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:44.390Z,1510167044.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:44.735Z,1510167044.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:44.775Z,1510167044.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:45.137Z,1510167045.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:45.170Z,1510167045.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:45.539Z,1510167045.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:45.572Z,1510167045.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:45.937Z,1510167045.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:45.966Z,1510167045.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:46.336Z,1510167046.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:46.352Z,1510167046.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:46.754Z,1510167046.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:46.780Z,1510167046.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:47.153Z,1510167047.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:47.183Z,1510167047.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:47.553Z,1510167047.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:47.586Z,1510167047.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:47.939Z,1510167047.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:48.004Z,1510167048.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:48.339Z,1510167048.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:48.360Z,1510167048.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:48.742Z,1510167048.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:48.758Z,1510167048.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:49.140Z,1510167049.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:49.163Z,1510167049.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:49.554Z,1510167049.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:49.580Z,1510167049.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:49.956Z,1510167049.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:49.972Z,1510167049.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:50.352Z,1510167050.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:50.376Z,1510167050.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:50.742Z,1510167050.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:50.766Z,1510167050.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:51.150Z,1510167051.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:51.170Z,1510167051.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:51.535Z,1510167051.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:51.571Z,1510167051.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:51.944Z,1510167051.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:51.960Z,1510167051.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:52.346Z,1510167052.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:52.354Z,1510167052.354 [BPC1](ERROR): Failed to receive battery data
2017-11-08T18:50:52.354Z,1510167052.354 [BPC1] Communications Fault, FailCount= 1
2017-11-08T18:50:52.354Z,1510167052.354 [BPC1](ERROR): Communications Fault
2017-11-08T18:50:52.364Z,1510167052.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:52.453Z,1510167052.453 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T18:50:52.754Z,1510167052.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:52.778Z,1510167052.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:53.150Z,1510167053.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:53.172Z,1510167053.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:53.554Z,1510167053.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:53.578Z,1510167053.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:53.662Z,1510167053.662 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T18:50:53.662Z,1510167053.662 [BPC1] No Fault, FailCount= 1
2017-11-08T18:50:53.935Z,1510167053.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:54.023Z,1510167054.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:54.338Z,1510167054.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:54.370Z,1510167054.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:54.739Z,1510167054.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:54.756Z,1510167054.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:55.139Z,1510167055.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:55.155Z,1510167055.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:55.550Z,1510167055.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:55.582Z,1510167055.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:55.958Z,1510167055.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:55.989Z,1510167055.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:56.350Z,1510167056.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:56.366Z,1510167056.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:56.742Z,1510167056.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:56.759Z,1510167056.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:57.140Z,1510167057.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:57.161Z,1510167057.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:57.543Z,1510167057.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:57.560Z,1510167057.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:57.943Z,1510167057.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:57.963Z,1510167057.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:58.341Z,1510167058.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:58.364Z,1510167058.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:58.746Z,1510167058.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:58.762Z,1510167058.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:59.162Z,1510167059.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:59.196Z,1510167059.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:59.546Z,1510167059.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:59.562Z,1510167059.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:50:59.942Z,1510167059.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:50:59.958Z,1510167059.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:00.342Z,1510167060.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:00.358Z,1510167060.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:00.741Z,1510167060.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:00.778Z,1510167060.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:01.146Z,1510167061.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:01.163Z,1510167061.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:01.554Z,1510167061.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:01.571Z,1510167061.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:04.815Z,1510167064.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:04.857Z,1510167064.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:04.983Z,1510167064.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:05.024Z,1510167065.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:05.371Z,1510167065.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:05.398Z,1510167065.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:05.768Z,1510167065.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:05.803Z,1510167065.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:06.163Z,1510167066.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:06.201Z,1510167066.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:06.578Z,1510167066.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:06.612Z,1510167066.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:06.993Z,1510167066.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:07.012Z,1510167067.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:07.380Z,1510167067.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:07.421Z,1510167067.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:07.767Z,1510167067.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:07.807Z,1510167067.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:08.168Z,1510167068.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:08.206Z,1510167068.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:08.569Z,1510167068.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:08.601Z,1510167068.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:08.967Z,1510167068.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:09.011Z,1510167069.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:09.386Z,1510167069.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:09.419Z,1510167069.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:09.778Z,1510167069.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:09.810Z,1510167069.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:10.192Z,1510167070.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:10.222Z,1510167070.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:10.571Z,1510167070.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:10.587Z,1510167070.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:10.972Z,1510167070.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:10.988Z,1510167070.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:11.371Z,1510167071.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:11.387Z,1510167071.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:11.782Z,1510167071.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:11.819Z,1510167071.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:12.178Z,1510167072.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:12.195Z,1510167072.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:12.582Z,1510167072.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:12.611Z,1510167072.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:12.971Z,1510167072.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:12.987Z,1510167072.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:13.371Z,1510167073.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:13.387Z,1510167073.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:13.771Z,1510167073.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:13.791Z,1510167073.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:14.171Z,1510167074.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:14.187Z,1510167074.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:14.578Z,1510167074.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:14.595Z,1510167074.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:14.982Z,1510167074.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:14.999Z,1510167074.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:15.382Z,1510167075.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:15.452Z,1510167075.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:15.766Z,1510167075.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:15.800Z,1510167075.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:16.171Z,1510167076.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:16.227Z,1510167076.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:16.574Z,1510167076.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:16.595Z,1510167076.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:16.975Z,1510167076.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:17.035Z,1510167077.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:17.378Z,1510167077.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:17.399Z,1510167077.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:17.788Z,1510167077.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:17.805Z,1510167077.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:18.188Z,1510167078.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:18.204Z,1510167078.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:18.585Z,1510167078.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:18.601Z,1510167078.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:18.974Z,1510167078.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:18.995Z,1510167078.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:19.374Z,1510167079.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:19.395Z,1510167079.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:19.775Z,1510167079.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:19.796Z,1510167079.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:20.174Z,1510167080.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:20.195Z,1510167080.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:20.585Z,1510167080.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:20.601Z,1510167080.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:20.987Z,1510167080.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:21.004Z,1510167081.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:21.386Z,1510167081.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:21.402Z,1510167081.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:21.775Z,1510167081.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:21.796Z,1510167081.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:22.172Z,1510167082.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:22.194Z,1510167082.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:22.576Z,1510167082.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:22.593Z,1510167082.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:22.964Z,1510167082.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:22.992Z,1510167082.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:23.375Z,1510167083.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:23.395Z,1510167083.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:23.789Z,1510167083.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:23.806Z,1510167083.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:24.185Z,1510167084.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:24.201Z,1510167084.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:24.586Z,1510167084.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:24.602Z,1510167084.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:24.974Z,1510167084.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:24.996Z,1510167084.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:25.364Z,1510167085.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:25.427Z,1510167085.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:25.773Z,1510167085.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:25.805Z,1510167085.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:26.164Z,1510167086.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:26.191Z,1510167086.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:26.585Z,1510167086.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:26.602Z,1510167086.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:26.990Z,1510167086.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:27.006Z,1510167087.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:27.391Z,1510167087.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:27.407Z,1510167087.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:27.763Z,1510167087.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:27.798Z,1510167087.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:28.167Z,1510167088.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:28.209Z,1510167088.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:28.567Z,1510167088.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:28.595Z,1510167088.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:28.963Z,1510167088.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:28.995Z,1510167088.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:29.367Z,1510167089.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:29.399Z,1510167089.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:29.783Z,1510167089.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:29.812Z,1510167089.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:30.182Z,1510167090.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:30.205Z,1510167090.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:30.582Z,1510167090.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:30.605Z,1510167090.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:30.963Z,1510167090.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:30.992Z,1510167090.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:31.363Z,1510167091.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:31.380Z,1510167091.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:31.768Z,1510167091.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:31.806Z,1510167091.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:32.167Z,1510167092.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:32.184Z,1510167092.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:32.578Z,1510167092.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:32.610Z,1510167092.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:32.982Z,1510167092.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:33.014Z,1510167093.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:33.382Z,1510167093.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:33.410Z,1510167093.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:33.767Z,1510167093.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:33.812Z,1510167093.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:34.167Z,1510167094.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:34.192Z,1510167094.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:34.570Z,1510167094.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:34.586Z,1510167094.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:34.971Z,1510167094.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:34.992Z,1510167094.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:35.371Z,1510167095.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:35.387Z,1510167095.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:35.777Z,1510167095.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:35.839Z,1510167095.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:36.178Z,1510167096.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:36.235Z,1510167096.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:36.582Z,1510167096.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:36.599Z,1510167096.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:36.970Z,1510167096.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:36.986Z,1510167096.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:37.369Z,1510167097.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:37.427Z,1510167097.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:37.771Z,1510167097.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:37.791Z,1510167097.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:38.168Z,1510167098.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:38.226Z,1510167098.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:38.578Z,1510167098.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:38.595Z,1510167098.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:38.982Z,1510167098.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:38.998Z,1510167098.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:39.377Z,1510167099.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:39.399Z,1510167099.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:39.773Z,1510167099.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:39.789Z,1510167099.789 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:39.790Z,1510167099.790 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 109
2017-11-08T18:51:39.790Z,1510167099.790 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T18:51:39.791Z,1510167099.791 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:39.791Z,1510167099.791 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 109
2017-11-08T18:51:39.792Z,1510167099.792 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T18:51:39.793Z,1510167099.793 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:39.793Z,1510167099.793 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 109
2017-11-08T18:51:39.794Z,1510167099.794 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T18:51:39.873Z,1510167099.873 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T18:51:39.873Z,1510167099.873 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T18:51:39.873Z,1510167099.873 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T18:51:40.170Z,1510167100.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:40.273Z,1510167100.273 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T18:51:40.273Z,1510167100.273 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 109
2017-11-08T18:51:40.273Z,1510167100.273 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T18:51:40.273Z,1510167100.273 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 109
2017-11-08T18:51:40.274Z,1510167100.274 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T18:51:40.274Z,1510167100.274 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 109
2017-11-08T18:51:40.571Z,1510167100.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:40.590Z,1510167100.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T18:51:40.591Z,1510167100.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:51:40.591Z,1510167100.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:51:40.591Z,1510167100.591 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T18:51:40.592Z,1510167100.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:51:40.592Z,1510167100.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:51:40.592Z,1510167100.592 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T18:51:40.593Z,1510167100.593 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:51:40.593Z,1510167100.593 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:51:40.973Z,1510167100.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:40.997Z,1510167100.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T18:51:40.998Z,1510167100.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:41.372Z,1510167101.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:41.399Z,1510167101.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T18:51:41.400Z,1510167101.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:41.785Z,1510167101.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:41.800Z,1510167101.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T18:51:41.801Z,1510167101.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:42.187Z,1510167102.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:42.207Z,1510167102.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T18:51:42.208Z,1510167102.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:42.585Z,1510167102.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:42.601Z,1510167102.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T18:51:42.602Z,1510167102.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:42.963Z,1510167102.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:42.990Z,1510167102.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T18:51:42.991Z,1510167102.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:43.375Z,1510167103.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:43.395Z,1510167103.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T18:51:43.396Z,1510167103.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:43.771Z,1510167103.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:43.795Z,1510167103.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T18:51:43.796Z,1510167103.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:44.163Z,1510167104.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:44.190Z,1510167104.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T18:51:44.191Z,1510167104.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:44.584Z,1510167104.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:44.601Z,1510167104.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T18:51:44.602Z,1510167104.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:44.987Z,1510167104.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:45.003Z,1510167105.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T18:51:45.004Z,1510167105.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:45.385Z,1510167105.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:45.407Z,1510167105.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T18:51:45.408Z,1510167105.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:45.774Z,1510167105.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:45.795Z,1510167105.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T18:51:45.796Z,1510167105.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:46.171Z,1510167106.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:46.193Z,1510167106.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T18:51:46.194Z,1510167106.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:46.563Z,1510167106.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:46.625Z,1510167106.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T18:51:46.626Z,1510167106.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:46.975Z,1510167106.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:46.995Z,1510167106.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T18:51:46.996Z,1510167106.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:47.371Z,1510167107.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:47.393Z,1510167107.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T18:51:47.394Z,1510167107.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:47.789Z,1510167107.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:47.805Z,1510167107.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T18:51:47.806Z,1510167107.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:48.187Z,1510167108.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:48.207Z,1510167108.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T18:51:48.208Z,1510167108.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:48.588Z,1510167108.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:48.604Z,1510167108.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T18:51:48.605Z,1510167108.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:48.963Z,1510167108.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:48.989Z,1510167108.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T18:51:48.990Z,1510167108.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:49.363Z,1510167109.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:49.389Z,1510167109.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T18:51:49.390Z,1510167109.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:49.771Z,1510167109.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:49.793Z,1510167109.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T18:51:49.794Z,1510167109.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:50.177Z,1510167110.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:50.199Z,1510167110.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T18:51:50.200Z,1510167110.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:50.590Z,1510167110.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:50.606Z,1510167110.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T18:51:50.607Z,1510167110.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:50.989Z,1510167110.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:51.007Z,1510167111.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T18:51:51.008Z,1510167111.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:51.388Z,1510167111.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:51.403Z,1510167111.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T18:51:51.404Z,1510167111.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:51.790Z,1510167111.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:51.831Z,1510167111.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T18:51:51.833Z,1510167111.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:52.178Z,1510167112.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:52.199Z,1510167112.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T18:51:52.200Z,1510167112.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:52.563Z,1510167112.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:52.589Z,1510167112.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T18:51:52.590Z,1510167112.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:52.975Z,1510167112.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:52.998Z,1510167112.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T18:51:52.999Z,1510167112.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:53.371Z,1510167113.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:53.400Z,1510167113.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T18:51:53.401Z,1510167113.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:53.788Z,1510167113.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:53.807Z,1510167113.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T18:51:53.808Z,1510167113.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:54.187Z,1510167114.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:54.203Z,1510167114.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T18:51:54.205Z,1510167114.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:54.584Z,1510167114.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:54.600Z,1510167114.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T18:51:54.601Z,1510167114.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:54.972Z,1510167114.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:55.001Z,1510167115.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T18:51:55.002Z,1510167115.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:55.372Z,1510167115.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:55.394Z,1510167115.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T18:51:55.394Z,1510167115.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:55.768Z,1510167115.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:55.810Z,1510167115.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T18:51:55.811Z,1510167115.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:56.163Z,1510167116.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:56.207Z,1510167116.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T18:51:56.208Z,1510167116.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:56.583Z,1510167116.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:56.619Z,1510167116.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T18:51:56.620Z,1510167116.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:56.982Z,1510167116.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:57.014Z,1510167117.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T18:51:57.015Z,1510167117.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:57.377Z,1510167117.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:57.449Z,1510167117.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T18:51:57.450Z,1510167117.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:57.767Z,1510167117.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:57.784Z,1510167117.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T18:51:57.801Z,1510167117.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:58.167Z,1510167118.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:58.223Z,1510167118.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T18:51:58.224Z,1510167118.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:58.563Z,1510167118.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:58.583Z,1510167118.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T18:51:58.584Z,1510167118.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:58.967Z,1510167118.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:59.023Z,1510167119.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T18:51:59.024Z,1510167119.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:59.368Z,1510167119.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:59.384Z,1510167119.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T18:51:59.385Z,1510167119.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:51:59.782Z,1510167119.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:51:59.814Z,1510167119.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:00.182Z,1510167120.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:00.213Z,1510167120.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:00.582Z,1510167120.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:00.615Z,1510167120.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:00.972Z,1510167120.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:00.988Z,1510167120.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:00.991Z,1510167120.991 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T18:52:00.991Z,1510167120.991 [Default:CheckIn:C.Wait] Stopped
2017-11-08T18:52:00.991Z,1510167120.991 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T18:52:00.991Z,1510167120.991 [Default:CheckIn:D] Running Loop=1
2017-11-08T18:52:01.372Z,1510167121.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:01.388Z,1510167121.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:01.392Z,1510167121.392 [Default:CheckIn:D] Stopped
2017-11-08T18:52:01.392Z,1510167121.392 [Default:CheckIn:E] Running Loop=1
2017-11-08T18:52:01.776Z,1510167121.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:01.792Z,1510167121.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:01.796Z,1510167121.796 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 325.340202 min 
2017-11-08T18:52:01.796Z,1510167121.796 [Default:CheckIn:E] Stopped
2017-11-08T18:52:01.796Z,1510167121.796 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T18:52:01.796Z,1510167121.796 [Default:CheckIn] Stopped
2017-11-08T18:52:01.796Z,1510167121.796 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T18:52:01.813Z,1510167121.813 [Default:CheckIn](INFO): Running loop #20
2017-11-08T18:52:01.813Z,1510167121.813 [Default:CheckIn] Running Loop=20
2017-11-08T18:52:01.813Z,1510167121.813 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T18:52:01.813Z,1510167121.813 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T18:52:04.849Z,1510167124.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:04.874Z,1510167124.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:05.010Z,1510167125.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:05.044Z,1510167125.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:05.417Z,1510167125.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:05.433Z,1510167125.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:05.813Z,1510167125.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:05.829Z,1510167125.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:06.195Z,1510167126.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:06.222Z,1510167126.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:06.596Z,1510167126.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:06.622Z,1510167126.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:06.987Z,1510167126.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:07.026Z,1510167127.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:07.409Z,1510167127.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:07.471Z,1510167127.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:07.812Z,1510167127.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:07.829Z,1510167127.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:08.213Z,1510167128.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:08.230Z,1510167128.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:08.593Z,1510167128.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:08.626Z,1510167128.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:08.996Z,1510167128.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:09.021Z,1510167129.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:09.417Z,1510167129.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:09.434Z,1510167129.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:09.806Z,1510167129.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:09.828Z,1510167129.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:10.213Z,1510167130.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:10.229Z,1510167130.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:10.588Z,1510167130.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:10.624Z,1510167130.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:10.989Z,1510167130.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:11.022Z,1510167131.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:11.395Z,1510167131.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:11.427Z,1510167131.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:11.801Z,1510167131.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:11.830Z,1510167131.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:12.202Z,1510167132.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:12.234Z,1510167132.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:12.612Z,1510167132.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:12.629Z,1510167132.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:12.988Z,1510167132.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:13.028Z,1510167133.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:13.388Z,1510167133.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:13.404Z,1510167133.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:13.796Z,1510167133.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:13.828Z,1510167133.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:14.195Z,1510167134.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:14.211Z,1510167134.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:14.606Z,1510167134.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:14.639Z,1510167134.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:15.009Z,1510167135.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:15.036Z,1510167135.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:15.409Z,1510167135.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:15.437Z,1510167135.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:15.795Z,1510167135.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:15.816Z,1510167135.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:16.195Z,1510167136.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:16.215Z,1510167136.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:16.595Z,1510167136.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:16.611Z,1510167136.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:16.992Z,1510167136.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:17.015Z,1510167137.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:17.399Z,1510167137.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:17.419Z,1510167137.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:17.809Z,1510167137.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:17.860Z,1510167137.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:18.202Z,1510167138.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:18.259Z,1510167138.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:18.610Z,1510167138.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:18.646Z,1510167138.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:18.995Z,1510167138.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:19.011Z,1510167139.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:19.394Z,1510167139.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:19.455Z,1510167139.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:19.799Z,1510167139.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:19.816Z,1510167139.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:20.195Z,1510167140.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:20.244Z,1510167140.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:20.602Z,1510167140.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:20.618Z,1510167140.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:21.013Z,1510167141.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:21.045Z,1510167141.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:21.403Z,1510167141.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:21.420Z,1510167141.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:21.796Z,1510167141.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:21.812Z,1510167141.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:22.201Z,1510167142.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:22.221Z,1510167142.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:22.596Z,1510167142.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:22.611Z,1510167142.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:22.995Z,1510167142.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:23.012Z,1510167143.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:23.398Z,1510167143.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:23.414Z,1510167143.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:23.804Z,1510167143.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:23.820Z,1510167143.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:24.203Z,1510167144.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:24.223Z,1510167144.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:24.607Z,1510167144.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:24.623Z,1510167144.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:24.995Z,1510167144.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:25.011Z,1510167145.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:25.397Z,1510167145.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:25.414Z,1510167145.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:25.802Z,1510167145.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:25.819Z,1510167145.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:26.194Z,1510167146.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:26.220Z,1510167146.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:26.603Z,1510167146.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:26.624Z,1510167146.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:27.010Z,1510167147.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:27.026Z,1510167147.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:27.403Z,1510167147.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:27.419Z,1510167147.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:27.794Z,1510167147.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:27.810Z,1510167147.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:28.201Z,1510167148.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:28.217Z,1510167148.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:28.595Z,1510167148.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:28.648Z,1510167148.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:28.995Z,1510167148.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:29.011Z,1510167149.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:29.397Z,1510167149.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:29.414Z,1510167149.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:29.803Z,1510167149.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:29.823Z,1510167149.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:30.210Z,1510167150.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:30.226Z,1510167150.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:30.606Z,1510167150.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:30.622Z,1510167150.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:30.995Z,1510167150.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:31.010Z,1510167151.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:31.394Z,1510167151.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:31.411Z,1510167151.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:31.802Z,1510167151.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:31.818Z,1510167151.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:32.191Z,1510167152.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:32.230Z,1510167152.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:32.606Z,1510167152.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:32.628Z,1510167152.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:33.010Z,1510167153.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:33.026Z,1510167153.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:33.409Z,1510167153.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:33.425Z,1510167153.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:33.794Z,1510167153.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:33.811Z,1510167153.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:34.201Z,1510167154.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:34.273Z,1510167154.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:34.595Z,1510167154.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:34.611Z,1510167154.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:34.995Z,1510167154.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:35.011Z,1510167155.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:35.401Z,1510167155.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:35.417Z,1510167155.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:35.808Z,1510167155.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:35.824Z,1510167155.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:36.207Z,1510167156.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:36.228Z,1510167156.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:36.610Z,1510167156.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:36.626Z,1510167156.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:36.994Z,1510167156.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:37.009Z,1510167157.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:37.394Z,1510167157.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:37.411Z,1510167157.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:37.802Z,1510167157.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:37.819Z,1510167157.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:38.198Z,1510167158.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:38.222Z,1510167158.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:38.606Z,1510167158.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:38.628Z,1510167158.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:39.010Z,1510167159.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:39.026Z,1510167159.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:39.408Z,1510167159.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:39.431Z,1510167159.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:39.794Z,1510167159.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:39.836Z,1510167159.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:40.201Z,1510167160.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:40.218Z,1510167160.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:40.588Z,1510167160.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:40.636Z,1510167160.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:40.997Z,1510167160.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:41.013Z,1510167161.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:41.402Z,1510167161.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:41.463Z,1510167161.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:41.809Z,1510167161.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:41.824Z,1510167161.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:42.208Z,1510167162.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:42.225Z,1510167162.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:42.611Z,1510167162.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:42.627Z,1510167162.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:42.988Z,1510167162.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:43.014Z,1510167163.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:43.397Z,1510167163.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:43.413Z,1510167163.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:43.803Z,1510167163.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:43.820Z,1510167163.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:44.188Z,1510167164.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:44.214Z,1510167164.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:44.610Z,1510167164.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:44.626Z,1510167164.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:45.012Z,1510167165.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:45.028Z,1510167165.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:45.409Z,1510167165.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:45.425Z,1510167165.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:45.788Z,1510167165.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:45.821Z,1510167165.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:46.202Z,1510167166.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:46.223Z,1510167166.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:46.588Z,1510167166.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:46.614Z,1510167166.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:46.989Z,1510167166.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:47.025Z,1510167167.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:47.403Z,1510167167.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:47.419Z,1510167167.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:47.809Z,1510167167.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:47.825Z,1510167167.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:48.205Z,1510167168.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:48.235Z,1510167168.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:48.613Z,1510167168.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:48.636Z,1510167168.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:48.988Z,1510167168.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:49.025Z,1510167169.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:49.388Z,1510167169.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:49.420Z,1510167169.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:49.796Z,1510167169.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:49.859Z,1510167169.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:50.195Z,1510167170.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:50.222Z,1510167170.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:50.608Z,1510167170.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:50.626Z,1510167170.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:51.012Z,1510167171.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:51.029Z,1510167171.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:51.407Z,1510167171.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:51.424Z,1510167171.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:51.788Z,1510167171.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:51.824Z,1510167171.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:52.195Z,1510167172.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:52.228Z,1510167172.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:52.588Z,1510167172.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:52.622Z,1510167172.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:52.989Z,1510167172.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:53.018Z,1510167173.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:53.391Z,1510167173.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:53.420Z,1510167173.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:53.809Z,1510167173.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:53.825Z,1510167173.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:54.209Z,1510167174.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:54.225Z,1510167174.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:54.612Z,1510167174.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:54.628Z,1510167174.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:54.995Z,1510167174.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:55.021Z,1510167175.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:55.388Z,1510167175.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:55.412Z,1510167175.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:55.510Z,1510167175.510 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T18:52:55.796Z,1510167175.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:55.828Z,1510167175.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:56.195Z,1510167176.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:56.226Z,1510167176.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:56.602Z,1510167176.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:56.636Z,1510167176.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:57.016Z,1510167177.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:57.033Z,1510167177.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:57.413Z,1510167177.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:57.436Z,1510167177.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:57.788Z,1510167177.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:57.804Z,1510167177.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:58.195Z,1510167178.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:58.230Z,1510167178.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:58.588Z,1510167178.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:58.604Z,1510167178.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:58.989Z,1510167178.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:59.005Z,1510167179.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:59.391Z,1510167179.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:59.428Z,1510167179.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:52:59.801Z,1510167179.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:52:59.835Z,1510167179.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:00.210Z,1510167180.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:00.244Z,1510167180.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:00.602Z,1510167180.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:00.656Z,1510167180.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:00.991Z,1510167180.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:01.011Z,1510167181.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:01.396Z,1510167181.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:01.413Z,1510167181.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:01.800Z,1510167181.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:01.852Z,1510167181.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:04.890Z,1510167184.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:04.906Z,1510167184.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:05.030Z,1510167185.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:05.072Z,1510167185.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:05.441Z,1510167185.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:05.457Z,1510167185.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:05.841Z,1510167185.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:05.857Z,1510167185.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:06.215Z,1510167186.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:06.264Z,1510167186.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:06.612Z,1510167186.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:06.636Z,1510167186.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:07.015Z,1510167187.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:07.056Z,1510167187.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:07.426Z,1510167187.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:07.456Z,1510167187.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:07.837Z,1510167187.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:07.860Z,1510167187.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:08.225Z,1510167188.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:08.259Z,1510167188.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:08.616Z,1510167188.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:08.650Z,1510167188.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:09.015Z,1510167189.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:09.050Z,1510167189.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:09.437Z,1510167189.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:09.459Z,1510167189.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:09.825Z,1510167189.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:09.857Z,1510167189.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:10.226Z,1510167190.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:10.251Z,1510167190.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:10.615Z,1510167190.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:10.653Z,1510167190.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:11.016Z,1510167191.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:11.052Z,1510167191.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:11.416Z,1510167191.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:11.452Z,1510167191.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:11.830Z,1510167191.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:11.864Z,1510167191.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:12.226Z,1510167192.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:12.259Z,1510167192.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:12.626Z,1510167192.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:12.652Z,1510167192.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:13.016Z,1510167193.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:13.032Z,1510167193.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:13.415Z,1510167193.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:13.456Z,1510167193.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:13.816Z,1510167193.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:13.860Z,1510167193.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:14.216Z,1510167194.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:14.232Z,1510167194.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:14.630Z,1510167194.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:14.662Z,1510167194.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:15.033Z,1510167195.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:15.103Z,1510167195.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:15.430Z,1510167195.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:15.462Z,1510167195.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:15.818Z,1510167195.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:15.835Z,1510167195.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:16.224Z,1510167196.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:16.240Z,1510167196.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:16.615Z,1510167196.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:16.636Z,1510167196.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:17.015Z,1510167197.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:17.032Z,1510167197.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:17.419Z,1510167197.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:17.440Z,1510167197.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:17.830Z,1510167197.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:17.862Z,1510167197.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:18.233Z,1510167198.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:18.266Z,1510167198.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:18.626Z,1510167198.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:18.642Z,1510167198.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:19.021Z,1510167199.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:19.044Z,1510167199.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:19.417Z,1510167199.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:19.434Z,1510167199.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:19.820Z,1510167199.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:19.840Z,1510167199.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:20.222Z,1510167200.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:20.238Z,1510167200.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:20.626Z,1510167200.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:20.699Z,1510167200.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:21.038Z,1510167201.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:21.072Z,1510167201.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:21.430Z,1510167201.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:21.446Z,1510167201.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:21.821Z,1510167201.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:21.837Z,1510167201.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:22.220Z,1510167202.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:22.240Z,1510167202.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:22.612Z,1510167202.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:22.647Z,1510167202.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:23.024Z,1510167203.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:23.041Z,1510167203.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:23.419Z,1510167203.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:23.452Z,1510167203.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:23.836Z,1510167203.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:23.853Z,1510167203.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:24.230Z,1510167204.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:24.251Z,1510167204.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:24.633Z,1510167204.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:24.650Z,1510167204.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:25.022Z,1510167205.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:25.044Z,1510167205.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:25.411Z,1510167205.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:25.447Z,1510167205.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:25.819Z,1510167205.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:25.844Z,1510167205.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:26.222Z,1510167206.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:26.243Z,1510167206.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:26.632Z,1510167206.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:26.656Z,1510167206.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:27.036Z,1510167207.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:27.103Z,1510167207.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:27.436Z,1510167207.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:27.453Z,1510167207.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:27.812Z,1510167207.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:27.867Z,1510167207.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:28.215Z,1510167208.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:28.247Z,1510167208.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:28.612Z,1510167208.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:28.668Z,1510167208.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:29.011Z,1510167209.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:29.047Z,1510167209.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:29.411Z,1510167209.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:29.444Z,1510167209.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:29.833Z,1510167209.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:29.850Z,1510167209.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:30.232Z,1510167210.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:30.256Z,1510167210.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:30.636Z,1510167210.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:30.653Z,1510167210.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:31.011Z,1510167211.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:31.052Z,1510167211.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:31.412Z,1510167211.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:31.447Z,1510167211.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:31.816Z,1510167211.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:31.849Z,1510167211.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:32.211Z,1510167212.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:32.243Z,1510167212.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:32.631Z,1510167212.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:32.648Z,1510167212.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:33.035Z,1510167213.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:33.052Z,1510167213.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:33.428Z,1510167213.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:33.448Z,1510167213.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:33.811Z,1510167213.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:33.846Z,1510167213.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:34.215Z,1510167214.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:34.247Z,1510167214.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:34.611Z,1510167214.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:34.646Z,1510167214.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:35.016Z,1510167215.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:35.046Z,1510167215.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:35.411Z,1510167215.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:35.446Z,1510167215.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:35.836Z,1510167215.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:35.852Z,1510167215.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:36.232Z,1510167216.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:36.249Z,1510167216.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:36.632Z,1510167216.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:36.648Z,1510167216.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:37.011Z,1510167217.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:37.063Z,1510167217.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:37.411Z,1510167217.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:37.445Z,1510167217.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:37.816Z,1510167217.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:37.848Z,1510167217.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:38.214Z,1510167218.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:38.246Z,1510167218.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:38.632Z,1510167218.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:38.649Z,1510167218.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:39.034Z,1510167219.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:39.051Z,1510167219.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:39.433Z,1510167219.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:39.449Z,1510167219.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:39.812Z,1510167219.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:39.836Z,1510167219.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:40.215Z,1510167220.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:40.239Z,1510167220.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:40.616Z,1510167220.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:40.632Z,1510167220.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:41.017Z,1510167221.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:41.033Z,1510167221.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:41.417Z,1510167221.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:41.449Z,1510167221.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:41.826Z,1510167221.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:41.867Z,1510167221.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:42.230Z,1510167222.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:42.264Z,1510167222.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:42.623Z,1510167222.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:42.639Z,1510167222.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:43.017Z,1510167223.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:43.034Z,1510167223.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:43.418Z,1510167223.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:43.436Z,1510167223.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:43.820Z,1510167223.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:43.837Z,1510167223.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:44.217Z,1510167224.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:44.240Z,1510167224.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:44.630Z,1510167224.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:44.647Z,1510167224.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:45.033Z,1510167225.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:45.067Z,1510167225.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:45.425Z,1510167225.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:45.448Z,1510167225.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:45.821Z,1510167225.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:45.837Z,1510167225.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:46.221Z,1510167226.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:46.237Z,1510167226.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:46.618Z,1510167226.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:46.639Z,1510167226.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:47.022Z,1510167227.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:47.038Z,1510167227.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:47.420Z,1510167227.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:47.437Z,1510167227.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:47.794Z,1510167227.794 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T18:53:47.795Z,1510167227.795 [NAL9602] Data Fault, FailCount= 1
2017-11-08T18:53:47.795Z,1510167227.795 [NAL9602](ERROR): Data Fault
2017-11-08T18:53:47.820Z,1510167227.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:47.841Z,1510167227.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:47.941Z,1510167227.941 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T18:53:48.198Z,1510167228.198 [NAL9602](INFO): Powering down
2017-11-08T18:53:48.224Z,1510167228.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:48.253Z,1510167228.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:48.611Z,1510167228.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:48.643Z,1510167228.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:49.021Z,1510167229.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:49.037Z,1510167229.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:49.120Z,1510167229.120 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T18:53:49.121Z,1510167229.121 [NAL9602] No Fault, FailCount= 1
2017-11-08T18:53:49.422Z,1510167229.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:49.496Z,1510167229.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:49.815Z,1510167229.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:49.843Z,1510167229.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:50.214Z,1510167230.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:50.240Z,1510167230.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:50.615Z,1510167230.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:50.685Z,1510167230.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:51.015Z,1510167231.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:51.044Z,1510167231.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:51.415Z,1510167231.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:51.464Z,1510167231.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:51.815Z,1510167231.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:51.844Z,1510167231.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:52.214Z,1510167232.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:52.244Z,1510167232.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:52.614Z,1510167232.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:52.639Z,1510167232.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:53.014Z,1510167233.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:53.044Z,1510167233.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:53.411Z,1510167233.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:53.446Z,1510167233.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:53.814Z,1510167233.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:53.839Z,1510167233.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:54.215Z,1510167234.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:54.240Z,1510167234.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:54.615Z,1510167234.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:54.644Z,1510167234.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:55.010Z,1510167235.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:55.045Z,1510167235.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:55.415Z,1510167235.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:55.444Z,1510167235.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:55.815Z,1510167235.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:55.840Z,1510167235.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:56.211Z,1510167236.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:56.245Z,1510167236.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:56.615Z,1510167236.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:56.644Z,1510167236.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:57.014Z,1510167237.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:57.044Z,1510167237.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:57.411Z,1510167237.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:57.441Z,1510167237.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:57.817Z,1510167237.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:57.856Z,1510167237.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:58.215Z,1510167238.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:58.246Z,1510167238.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:58.616Z,1510167238.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:58.667Z,1510167238.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:59.017Z,1510167239.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:59.062Z,1510167239.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:59.435Z,1510167239.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:59.467Z,1510167239.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:53:59.816Z,1510167239.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:53:59.872Z,1510167239.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:00.219Z,1510167240.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:00.251Z,1510167240.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:00.658Z,1510167240.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:00.699Z,1510167240.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:01.015Z,1510167241.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:01.052Z,1510167241.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:01.420Z,1510167241.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:01.450Z,1510167241.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:01.819Z,1510167241.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:01.850Z,1510167241.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:04.901Z,1510167244.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:04.917Z,1510167244.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:05.027Z,1510167245.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:05.076Z,1510167245.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:05.427Z,1510167245.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:05.460Z,1510167245.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:05.840Z,1510167245.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:05.860Z,1510167245.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:06.223Z,1510167246.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:06.249Z,1510167246.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:06.627Z,1510167246.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:06.659Z,1510167246.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:07.023Z,1510167247.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:07.049Z,1510167247.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:07.422Z,1510167247.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:07.456Z,1510167247.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:07.824Z,1510167247.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:07.858Z,1510167247.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:08.219Z,1510167248.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:08.235Z,1510167248.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:08.623Z,1510167248.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:08.640Z,1510167248.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:09.019Z,1510167249.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:09.036Z,1510167249.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:09.422Z,1510167249.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:09.443Z,1510167249.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:09.827Z,1510167249.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:09.848Z,1510167249.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:10.226Z,1510167250.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:10.243Z,1510167250.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:10.622Z,1510167250.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:10.638Z,1510167250.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:11.026Z,1510167251.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:11.043Z,1510167251.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:11.427Z,1510167251.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:11.510Z,1510167251.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:11.832Z,1510167251.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:11.895Z,1510167251.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:12.225Z,1510167252.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:12.241Z,1510167252.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:12.628Z,1510167252.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:12.682Z,1510167252.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:13.028Z,1510167253.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:13.044Z,1510167253.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:13.429Z,1510167253.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:13.479Z,1510167253.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:13.830Z,1510167253.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:13.846Z,1510167253.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:14.228Z,1510167254.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:14.244Z,1510167254.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:14.632Z,1510167254.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:14.648Z,1510167254.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:15.029Z,1510167255.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:15.045Z,1510167255.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:15.424Z,1510167255.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:15.440Z,1510167255.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:15.829Z,1510167255.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:15.845Z,1510167255.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:16.229Z,1510167256.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:16.245Z,1510167256.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:16.625Z,1510167256.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:16.647Z,1510167256.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:17.025Z,1510167257.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:17.041Z,1510167257.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:17.429Z,1510167257.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:17.446Z,1510167257.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:17.825Z,1510167257.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:17.841Z,1510167257.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:18.202Z,1510167258.202 [NAL9602](INFO): Powering up NAL9602
2017-11-08T18:54:18.228Z,1510167258.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:18.249Z,1510167258.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:18.629Z,1510167258.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:18.645Z,1510167258.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:19.025Z,1510167259.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:19.043Z,1510167259.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:19.429Z,1510167259.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:19.446Z,1510167259.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:19.827Z,1510167259.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:19.848Z,1510167259.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:20.230Z,1510167260.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:20.246Z,1510167260.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:20.633Z,1510167260.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:20.649Z,1510167260.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:21.027Z,1510167261.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:21.058Z,1510167261.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:21.427Z,1510167261.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:21.447Z,1510167261.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:21.826Z,1510167261.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:21.879Z,1510167261.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:22.230Z,1510167262.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:22.251Z,1510167262.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:22.626Z,1510167262.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:22.647Z,1510167262.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:23.029Z,1510167263.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:23.046Z,1510167263.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:23.429Z,1510167263.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:23.446Z,1510167263.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:23.825Z,1510167263.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:23.847Z,1510167263.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:24.225Z,1510167264.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:24.242Z,1510167264.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:24.627Z,1510167264.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:24.648Z,1510167264.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:25.029Z,1510167265.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:25.045Z,1510167265.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:25.429Z,1510167265.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:25.445Z,1510167265.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:25.829Z,1510167265.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:25.845Z,1510167265.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:26.230Z,1510167266.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:26.245Z,1510167266.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:26.629Z,1510167266.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:26.645Z,1510167266.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:27.029Z,1510167267.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:27.045Z,1510167267.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:27.425Z,1510167267.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:27.447Z,1510167267.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:27.829Z,1510167267.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:27.845Z,1510167267.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:28.236Z,1510167268.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:28.278Z,1510167268.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:28.660Z,1510167268.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:28.692Z,1510167268.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:29.007Z,1510167269.007 [NAL9602](INFO): NAL9602 initialized
2017-11-08T18:54:29.041Z,1510167269.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:29.099Z,1510167269.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:29.432Z,1510167269.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:29.448Z,1510167269.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:29.840Z,1510167269.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:29.885Z,1510167269.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:30.244Z,1510167270.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:30.269Z,1510167270.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:30.645Z,1510167270.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:30.661Z,1510167270.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:31.020Z,1510167271.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:31.054Z,1510167271.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:31.424Z,1510167271.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:31.449Z,1510167271.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:31.845Z,1510167271.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:31.861Z,1510167271.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:32.312Z,1510167272.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:32.349Z,1510167272.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:32.640Z,1510167272.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:32.657Z,1510167272.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:33.024Z,1510167273.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:33.055Z,1510167273.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:33.423Z,1510167273.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:33.453Z,1510167273.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:33.840Z,1510167273.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:33.904Z,1510167273.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:34.243Z,1510167274.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:34.303Z,1510167274.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:34.634Z,1510167274.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:34.663Z,1510167274.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:35.020Z,1510167275.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:35.036Z,1510167275.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:35.424Z,1510167275.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:35.476Z,1510167275.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:35.834Z,1510167275.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:35.866Z,1510167275.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:36.249Z,1510167276.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:36.311Z,1510167276.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:36.649Z,1510167276.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:36.672Z,1510167276.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:37.020Z,1510167277.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:37.036Z,1510167277.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:37.427Z,1510167277.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:37.443Z,1510167277.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:37.842Z,1510167277.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:37.868Z,1510167277.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:38.237Z,1510167278.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:38.268Z,1510167278.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:38.637Z,1510167278.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:38.666Z,1510167278.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:39.034Z,1510167279.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:39.079Z,1510167279.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:39.423Z,1510167279.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:39.444Z,1510167279.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:39.834Z,1510167279.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:39.850Z,1510167279.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:40.246Z,1510167280.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:40.271Z,1510167280.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:40.642Z,1510167280.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:40.672Z,1510167280.672 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:40.672Z,1510167280.672 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 110
2017-11-08T18:54:40.672Z,1510167280.672 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T18:54:40.674Z,1510167280.674 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:40.674Z,1510167280.674 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 110
2017-11-08T18:54:40.674Z,1510167280.674 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T18:54:40.676Z,1510167280.676 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:40.676Z,1510167280.676 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 110
2017-11-08T18:54:40.676Z,1510167280.676 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T18:54:40.753Z,1510167280.753 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T18:54:40.753Z,1510167280.753 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T18:54:40.753Z,1510167280.753 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T18:54:41.031Z,1510167281.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:41.125Z,1510167281.125 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T18:54:41.125Z,1510167281.125 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 110
2017-11-08T18:54:41.125Z,1510167281.125 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T18:54:41.125Z,1510167281.125 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 110
2017-11-08T18:54:41.126Z,1510167281.126 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T18:54:41.126Z,1510167281.126 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 110
2017-11-08T18:54:41.430Z,1510167281.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:41.471Z,1510167281.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T18:54:41.471Z,1510167281.471 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:54:41.471Z,1510167281.471 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:54:41.472Z,1510167281.472 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T18:54:41.472Z,1510167281.472 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:54:41.477Z,1510167281.477 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:54:41.477Z,1510167281.477 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T18:54:41.477Z,1510167281.477 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:54:41.478Z,1510167281.478 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:54:41.840Z,1510167281.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:41.856Z,1510167281.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T18:54:41.857Z,1510167281.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:42.241Z,1510167282.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:42.256Z,1510167282.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T18:54:42.257Z,1510167282.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:42.639Z,1510167282.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:42.659Z,1510167282.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T18:54:42.660Z,1510167282.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:43.023Z,1510167283.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:43.046Z,1510167283.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T18:54:43.047Z,1510167283.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:43.432Z,1510167283.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:43.449Z,1510167283.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T18:54:43.450Z,1510167283.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:43.853Z,1510167283.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:43.874Z,1510167283.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T18:54:43.875Z,1510167283.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:44.252Z,1510167284.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:44.280Z,1510167284.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T18:54:44.301Z,1510167284.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:44.644Z,1510167284.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:44.701Z,1510167284.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T18:54:44.702Z,1510167284.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:45.025Z,1510167285.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:45.054Z,1510167285.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T18:54:45.054Z,1510167285.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:45.420Z,1510167285.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:45.452Z,1510167285.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T18:54:45.457Z,1510167285.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:45.834Z,1510167285.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:45.866Z,1510167285.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T18:54:45.867Z,1510167285.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:46.238Z,1510167286.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:46.264Z,1510167286.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T18:54:46.265Z,1510167286.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:46.634Z,1510167286.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:46.663Z,1510167286.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T18:54:46.664Z,1510167286.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:47.020Z,1510167287.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:47.037Z,1510167287.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T18:54:47.038Z,1510167287.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:47.423Z,1510167287.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:47.440Z,1510167287.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T18:54:47.441Z,1510167287.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:47.839Z,1510167287.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:47.869Z,1510167287.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T18:54:47.870Z,1510167287.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:48.247Z,1510167288.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:48.280Z,1510167288.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T18:54:48.285Z,1510167288.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:48.647Z,1510167288.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:48.683Z,1510167288.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T18:54:48.683Z,1510167288.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:49.033Z,1510167289.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:49.049Z,1510167289.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T18:54:49.050Z,1510167289.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:49.427Z,1510167289.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:49.444Z,1510167289.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T18:54:49.445Z,1510167289.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:49.837Z,1510167289.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:49.854Z,1510167289.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T18:54:49.855Z,1510167289.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:50.246Z,1510167290.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:50.270Z,1510167290.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T18:54:50.271Z,1510167290.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:50.636Z,1510167290.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:50.652Z,1510167290.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T18:54:50.653Z,1510167290.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:51.031Z,1510167291.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:51.051Z,1510167291.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T18:54:51.052Z,1510167291.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:51.433Z,1510167291.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:51.449Z,1510167291.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T18:54:51.450Z,1510167291.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:51.828Z,1510167291.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:51.865Z,1510167291.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T18:54:51.866Z,1510167291.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:52.245Z,1510167292.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:52.267Z,1510167292.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T18:54:52.268Z,1510167292.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:52.634Z,1510167292.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:52.667Z,1510167292.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T18:54:52.668Z,1510167292.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:53.024Z,1510167293.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:53.056Z,1510167293.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T18:54:53.057Z,1510167293.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:53.423Z,1510167293.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:53.439Z,1510167293.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T18:54:53.440Z,1510167293.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:53.838Z,1510167293.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:53.863Z,1510167293.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T18:54:53.864Z,1510167293.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:54.237Z,1510167294.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:54.264Z,1510167294.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T18:54:54.265Z,1510167294.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:54.637Z,1510167294.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:54.664Z,1510167294.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T18:54:54.665Z,1510167294.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:55.028Z,1510167295.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:55.066Z,1510167295.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T18:54:55.067Z,1510167295.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:55.423Z,1510167295.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:55.439Z,1510167295.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T18:54:55.440Z,1510167295.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:55.841Z,1510167295.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:55.871Z,1510167295.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T18:54:55.872Z,1510167295.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:56.238Z,1510167296.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:56.259Z,1510167296.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T18:54:56.260Z,1510167296.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:56.642Z,1510167296.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:56.723Z,1510167296.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T18:54:56.724Z,1510167296.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:57.028Z,1510167297.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:57.044Z,1510167297.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T18:54:57.045Z,1510167297.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:57.425Z,1510167297.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:57.441Z,1510167297.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T18:54:57.442Z,1510167297.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:57.829Z,1510167297.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:57.875Z,1510167297.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T18:54:57.876Z,1510167297.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:58.245Z,1510167298.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:58.275Z,1510167298.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T18:54:58.276Z,1510167298.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:58.646Z,1510167298.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:58.726Z,1510167298.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T18:54:58.727Z,1510167298.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:59.027Z,1510167299.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:59.043Z,1510167299.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T18:54:59.044Z,1510167299.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:59.431Z,1510167299.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:59.446Z,1510167299.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T18:54:59.447Z,1510167299.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:54:59.846Z,1510167299.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:54:59.879Z,1510167299.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T18:54:59.879Z,1510167299.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:00.231Z,1510167300.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:00.247Z,1510167300.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T18:55:00.248Z,1510167300.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:00.630Z,1510167300.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:00.646Z,1510167300.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-08T18:55:00.647Z,1510167300.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:01.035Z,1510167301.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:01.052Z,1510167301.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:01.438Z,1510167301.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:01.454Z,1510167301.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:01.838Z,1510167301.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:01.859Z,1510167301.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:02.229Z,1510167302.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:02.246Z,1510167302.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:05.357Z,1510167305.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:05.384Z,1510167305.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:05.499Z,1510167305.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:05.529Z,1510167305.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:05.916Z,1510167305.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:05.933Z,1510167305.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:06.317Z,1510167306.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:06.333Z,1510167306.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:06.716Z,1510167306.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:06.783Z,1510167306.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:07.096Z,1510167307.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:07.132Z,1510167307.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:07.496Z,1510167307.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:07.529Z,1510167307.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:07.898Z,1510167307.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:07.931Z,1510167307.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:08.296Z,1510167308.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:08.312Z,1510167308.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:08.697Z,1510167308.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:08.714Z,1510167308.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:09.111Z,1510167309.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:09.140Z,1510167309.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:09.509Z,1510167309.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:09.534Z,1510167309.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:09.905Z,1510167309.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:09.930Z,1510167309.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:10.299Z,1510167310.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:10.316Z,1510167310.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:10.699Z,1510167310.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:10.719Z,1510167310.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:11.100Z,1510167311.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:11.116Z,1510167311.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:11.498Z,1510167311.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:11.515Z,1510167311.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:11.905Z,1510167311.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:11.942Z,1510167311.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:12.305Z,1510167312.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:12.345Z,1510167312.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:12.706Z,1510167312.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:12.722Z,1510167312.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:13.108Z,1510167313.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:13.124Z,1510167313.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:13.497Z,1510167313.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:13.513Z,1510167313.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:13.898Z,1510167313.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:13.915Z,1510167313.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:14.303Z,1510167314.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:14.323Z,1510167314.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:14.698Z,1510167314.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:14.715Z,1510167314.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:15.118Z,1510167315.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:15.134Z,1510167315.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:15.511Z,1510167315.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:15.527Z,1510167315.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:15.917Z,1510167315.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:15.933Z,1510167315.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:16.318Z,1510167316.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:16.347Z,1510167316.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:16.715Z,1510167316.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:16.744Z,1510167316.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:17.096Z,1510167317.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:17.133Z,1510167317.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:17.495Z,1510167317.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:17.530Z,1510167317.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:17.910Z,1510167317.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:17.936Z,1510167317.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:18.318Z,1510167318.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:18.363Z,1510167318.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:18.710Z,1510167318.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:18.798Z,1510167318.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:19.101Z,1510167319.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:19.118Z,1510167319.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:19.491Z,1510167319.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:19.524Z,1510167319.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:19.895Z,1510167319.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:19.944Z,1510167319.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:20.296Z,1510167320.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:20.326Z,1510167320.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:20.691Z,1510167320.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:20.740Z,1510167320.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:21.110Z,1510167321.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:21.131Z,1510167321.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:21.516Z,1510167321.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:21.532Z,1510167321.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:21.913Z,1510167321.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:21.929Z,1510167321.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:22.295Z,1510167322.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:22.328Z,1510167322.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:22.695Z,1510167322.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:22.732Z,1510167322.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:23.096Z,1510167323.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:23.129Z,1510167323.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:23.495Z,1510167323.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:23.512Z,1510167323.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:23.906Z,1510167323.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:23.942Z,1510167323.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:24.314Z,1510167324.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:24.340Z,1510167324.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:24.710Z,1510167324.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:24.742Z,1510167324.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:25.099Z,1510167325.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:25.119Z,1510167325.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:25.498Z,1510167325.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:25.515Z,1510167325.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:25.900Z,1510167325.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:25.916Z,1510167325.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:26.296Z,1510167326.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:26.313Z,1510167326.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:26.695Z,1510167326.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:26.711Z,1510167326.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:27.110Z,1510167327.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:27.142Z,1510167327.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:27.510Z,1510167327.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:27.526Z,1510167327.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:27.913Z,1510167327.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:27.930Z,1510167327.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:28.303Z,1510167328.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:28.319Z,1510167328.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:28.701Z,1510167328.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:28.718Z,1510167328.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:29.099Z,1510167329.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:29.159Z,1510167329.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:29.501Z,1510167329.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:29.518Z,1510167329.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:29.906Z,1510167329.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:29.923Z,1510167329.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:30.306Z,1510167330.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:30.322Z,1510167330.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:30.710Z,1510167330.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:30.727Z,1510167330.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:31.098Z,1510167331.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:31.119Z,1510167331.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:31.498Z,1510167331.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:31.515Z,1510167331.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:31.901Z,1510167331.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:31.918Z,1510167331.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:32.302Z,1510167332.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:32.318Z,1510167332.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:32.698Z,1510167332.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:32.720Z,1510167332.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:33.111Z,1510167333.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:33.132Z,1510167333.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:33.509Z,1510167333.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:33.527Z,1510167333.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:33.906Z,1510167333.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:33.922Z,1510167333.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:34.300Z,1510167334.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:34.316Z,1510167334.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:34.697Z,1510167334.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:34.713Z,1510167334.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:35.098Z,1510167335.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:35.122Z,1510167335.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:35.500Z,1510167335.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:35.517Z,1510167335.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:35.902Z,1510167335.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:35.918Z,1510167335.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:36.305Z,1510167336.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:36.321Z,1510167336.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:36.710Z,1510167336.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:36.726Z,1510167336.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:37.097Z,1510167337.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:37.119Z,1510167337.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:37.501Z,1510167337.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:37.518Z,1510167337.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:37.901Z,1510167337.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:37.918Z,1510167337.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:38.297Z,1510167338.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:38.314Z,1510167338.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:38.701Z,1510167338.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:38.717Z,1510167338.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:39.106Z,1510167339.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:39.123Z,1510167339.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:39.506Z,1510167339.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:39.522Z,1510167339.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:39.906Z,1510167339.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:39.922Z,1510167339.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:40.301Z,1510167340.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:40.317Z,1510167340.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:40.695Z,1510167340.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:40.721Z,1510167340.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:41.103Z,1510167341.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:41.188Z,1510167341.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:41.495Z,1510167341.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:41.530Z,1510167341.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:41.901Z,1510167341.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:41.934Z,1510167341.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:42.313Z,1510167342.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:42.368Z,1510167342.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:42.716Z,1510167342.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:42.733Z,1510167342.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:43.091Z,1510167343.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:43.143Z,1510167343.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:43.495Z,1510167343.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:43.527Z,1510167343.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:43.895Z,1510167343.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:43.926Z,1510167343.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:44.292Z,1510167344.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:44.320Z,1510167344.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:44.696Z,1510167344.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:44.728Z,1510167344.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:45.107Z,1510167345.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:45.132Z,1510167345.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:45.510Z,1510167345.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:45.535Z,1510167345.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:45.906Z,1510167345.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:45.939Z,1510167345.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:46.295Z,1510167346.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:46.329Z,1510167346.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:46.695Z,1510167346.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:46.710Z,1510167346.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:47.100Z,1510167347.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:47.116Z,1510167347.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:47.499Z,1510167347.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:47.520Z,1510167347.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:47.909Z,1510167347.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:47.948Z,1510167347.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:48.309Z,1510167348.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:48.346Z,1510167348.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:48.710Z,1510167348.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:48.726Z,1510167348.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:49.097Z,1510167349.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:49.119Z,1510167349.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:49.501Z,1510167349.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:49.517Z,1510167349.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:49.900Z,1510167349.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:49.916Z,1510167349.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:50.297Z,1510167350.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:50.313Z,1510167350.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:50.701Z,1510167350.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:50.717Z,1510167350.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:51.110Z,1510167351.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:51.126Z,1510167351.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:51.509Z,1510167351.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:51.549Z,1510167351.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:51.910Z,1510167351.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:51.926Z,1510167351.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:52.300Z,1510167352.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:52.317Z,1510167352.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:52.697Z,1510167352.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:52.715Z,1510167352.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:53.102Z,1510167353.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:53.118Z,1510167353.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:53.499Z,1510167353.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:53.520Z,1510167353.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:53.902Z,1510167353.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:53.918Z,1510167353.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:54.310Z,1510167354.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:54.326Z,1510167354.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:54.710Z,1510167354.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:54.726Z,1510167354.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:55.097Z,1510167355.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:55.113Z,1510167355.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:55.501Z,1510167355.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:55.518Z,1510167355.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:55.900Z,1510167355.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:55.917Z,1510167355.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:56.297Z,1510167356.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:56.313Z,1510167356.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:56.702Z,1510167356.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:56.718Z,1510167356.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:57.110Z,1510167357.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:57.126Z,1510167357.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:57.505Z,1510167357.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:57.521Z,1510167357.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:57.910Z,1510167357.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:57.926Z,1510167357.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:58.295Z,1510167358.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:58.316Z,1510167358.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:58.700Z,1510167358.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:58.716Z,1510167358.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:59.102Z,1510167359.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:59.119Z,1510167359.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:59.501Z,1510167359.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:59.518Z,1510167359.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:55:59.902Z,1510167359.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:55:59.923Z,1510167359.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:00.310Z,1510167360.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:00.326Z,1510167360.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:00.710Z,1510167360.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:00.727Z,1510167360.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:01.097Z,1510167361.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:01.114Z,1510167361.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:01.506Z,1510167361.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:01.523Z,1510167361.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:01.905Z,1510167361.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:01.922Z,1510167361.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:04.999Z,1510167364.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:05.068Z,1510167365.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:05.205Z,1510167365.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:05.222Z,1510167365.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:05.611Z,1510167365.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:05.632Z,1510167365.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:06.011Z,1510167366.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:06.057Z,1510167366.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:06.410Z,1510167366.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:06.426Z,1510167366.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:06.788Z,1510167366.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:06.850Z,1510167366.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:07.186Z,1510167367.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:07.220Z,1510167367.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:07.596Z,1510167367.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:07.612Z,1510167367.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:08.006Z,1510167368.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:08.023Z,1510167368.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:08.413Z,1510167368.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:08.429Z,1510167368.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:08.808Z,1510167368.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:08.824Z,1510167368.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:09.196Z,1510167369.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:09.213Z,1510167369.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:09.583Z,1510167369.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:09.617Z,1510167369.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:10.019Z,1510167370.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:10.026Z,1510167370.026 [PNI_TCM](ERROR): CRC does not match. Expected:0x20797 got:0x49164
2017-11-08T18:56:10.064Z,1510167370.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:10.396Z,1510167370.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:10.412Z,1510167370.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:10.803Z,1510167370.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:10.823Z,1510167370.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:11.210Z,1510167371.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:11.231Z,1510167371.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:11.607Z,1510167371.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:11.623Z,1510167371.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:11.986Z,1510167371.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:12.012Z,1510167372.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:12.399Z,1510167372.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:12.420Z,1510167372.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:12.810Z,1510167372.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:12.826Z,1510167372.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:13.208Z,1510167373.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:13.224Z,1510167373.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:13.608Z,1510167373.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:13.625Z,1510167373.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:13.994Z,1510167373.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:14.022Z,1510167374.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:14.383Z,1510167374.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:14.418Z,1510167374.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:14.811Z,1510167374.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:14.832Z,1510167374.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:15.206Z,1510167375.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:15.259Z,1510167375.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:15.609Z,1510167375.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:15.625Z,1510167375.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:15.988Z,1510167375.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:16.018Z,1510167376.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:16.388Z,1510167376.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:16.417Z,1510167376.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:16.811Z,1510167376.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:16.827Z,1510167376.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:17.211Z,1510167377.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:17.230Z,1510167377.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:17.607Z,1510167377.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:17.632Z,1510167377.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:17.985Z,1510167377.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:18.015Z,1510167378.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:18.386Z,1510167378.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:18.393Z,1510167378.393 [PNI_TCM](ERROR): CRC does not match. Expected:0x19647 got:0x33704
2017-11-08T18:56:18.422Z,1510167378.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:18.807Z,1510167378.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:18.824Z,1510167378.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:19.207Z,1510167379.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:19.236Z,1510167379.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:19.606Z,1510167379.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:19.627Z,1510167379.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:19.991Z,1510167379.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:20.020Z,1510167380.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:20.386Z,1510167380.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:20.419Z,1510167380.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:20.794Z,1510167380.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:20.824Z,1510167380.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:21.207Z,1510167381.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:21.230Z,1510167381.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:21.598Z,1510167381.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:21.634Z,1510167381.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:21.990Z,1510167381.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:22.026Z,1510167382.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:22.387Z,1510167382.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:22.431Z,1510167382.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:22.810Z,1510167382.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:22.827Z,1510167382.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:23.199Z,1510167383.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:23.236Z,1510167383.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:23.602Z,1510167383.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:23.632Z,1510167383.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:23.988Z,1510167383.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:24.032Z,1510167384.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:24.383Z,1510167384.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:24.403Z,1510167384.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:24.799Z,1510167384.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:24.830Z,1510167384.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:25.202Z,1510167385.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:25.235Z,1510167385.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:25.604Z,1510167385.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:25.630Z,1510167385.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:25.989Z,1510167385.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:26.008Z,1510167386.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:26.393Z,1510167386.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:26.409Z,1510167386.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:26.802Z,1510167386.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:26.830Z,1510167386.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:27.204Z,1510167387.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:27.237Z,1510167387.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:27.602Z,1510167387.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:27.689Z,1510167387.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:27.997Z,1510167387.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:28.014Z,1510167388.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:28.393Z,1510167388.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:28.451Z,1510167388.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:28.806Z,1510167388.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:28.822Z,1510167388.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:29.202Z,1510167389.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:29.252Z,1510167389.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:29.603Z,1510167389.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:29.623Z,1510167389.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:29.998Z,1510167389.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:30.013Z,1510167390.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:30.386Z,1510167390.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:30.428Z,1510167390.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:30.804Z,1510167390.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:30.811Z,1510167390.811 [PNI_TCM](ERROR): CRC does not match. Expected:0x60049 got:0x27932
2017-11-08T18:56:30.849Z,1510167390.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:31.205Z,1510167391.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:31.221Z,1510167391.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:31.602Z,1510167391.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:31.624Z,1510167391.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:31.994Z,1510167391.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:32.041Z,1510167392.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:32.398Z,1510167392.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:32.404Z,1510167392.404 [PNI_TCM](ERROR): CRC does not match. Expected:0x18423 got:0x57607
2017-11-08T18:56:32.425Z,1510167392.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:32.799Z,1510167392.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:32.839Z,1510167392.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:33.203Z,1510167393.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:33.219Z,1510167393.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:33.606Z,1510167393.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:33.622Z,1510167393.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:33.996Z,1510167393.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:34.017Z,1510167394.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:34.391Z,1510167394.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:34.415Z,1510167394.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:34.803Z,1510167394.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:34.819Z,1510167394.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:35.204Z,1510167395.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:35.222Z,1510167395.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:35.604Z,1510167395.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:35.620Z,1510167395.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:35.993Z,1510167395.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:36.009Z,1510167396.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:36.389Z,1510167396.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:36.416Z,1510167396.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:36.804Z,1510167396.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:36.821Z,1510167396.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:37.206Z,1510167397.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:37.227Z,1510167397.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:37.604Z,1510167397.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:37.651Z,1510167397.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:37.996Z,1510167397.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:38.012Z,1510167398.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:38.394Z,1510167398.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:38.425Z,1510167398.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:38.805Z,1510167398.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:38.811Z,1510167398.811 [PNI_TCM](ERROR): CRC does not match. Expected:0x28925 got:0x11786
2017-11-08T18:56:38.851Z,1510167398.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:39.204Z,1510167399.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:39.220Z,1510167399.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:39.603Z,1510167399.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:39.618Z,1510167399.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:39.994Z,1510167399.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:40.041Z,1510167400.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:40.393Z,1510167400.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:40.405Z,1510167400.405 [PNI_TCM](ERROR): CRC does not match. Expected:0x32655 got:0x46855
2017-11-08T18:56:40.442Z,1510167400.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:40.805Z,1510167400.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:40.821Z,1510167400.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:41.202Z,1510167401.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:41.218Z,1510167401.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:41.604Z,1510167401.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:41.628Z,1510167401.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:41.997Z,1510167401.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:42.013Z,1510167402.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:42.386Z,1510167402.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:42.419Z,1510167402.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:42.802Z,1510167402.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:42.824Z,1510167402.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:43.205Z,1510167403.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:43.221Z,1510167403.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:43.605Z,1510167403.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:43.621Z,1510167403.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:43.989Z,1510167403.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:44.011Z,1510167404.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:44.395Z,1510167404.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:44.411Z,1510167404.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:44.805Z,1510167404.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:44.822Z,1510167404.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:45.204Z,1510167405.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:45.221Z,1510167405.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:45.602Z,1510167405.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:45.635Z,1510167405.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:45.997Z,1510167405.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:46.013Z,1510167406.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:46.391Z,1510167406.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:46.428Z,1510167406.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:46.806Z,1510167406.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:46.812Z,1510167406.812 [PNI_TCM](ERROR): CRC does not match. Expected:0x15706 got:0x16148
2017-11-08T18:56:46.850Z,1510167406.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:47.205Z,1510167407.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:47.221Z,1510167407.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:47.602Z,1510167407.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:47.624Z,1510167407.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:47.994Z,1510167407.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:48.043Z,1510167408.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:48.396Z,1510167408.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:48.402Z,1510167408.402 [PNI_TCM](ERROR): CRC does not match. Expected:0x33728 got:0x1857
2017-11-08T18:56:48.447Z,1510167408.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:48.804Z,1510167408.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:48.824Z,1510167408.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:49.203Z,1510167409.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:49.223Z,1510167409.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:49.604Z,1510167409.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:49.687Z,1510167409.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:49.996Z,1510167409.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:50.017Z,1510167410.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:50.396Z,1510167410.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:50.450Z,1510167410.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:50.806Z,1510167410.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:50.828Z,1510167410.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:51.209Z,1510167411.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:51.255Z,1510167411.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:51.611Z,1510167411.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:51.626Z,1510167411.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:52.001Z,1510167412.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:52.017Z,1510167412.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:52.396Z,1510167412.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:52.412Z,1510167412.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:52.809Z,1510167412.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:52.825Z,1510167412.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:53.206Z,1510167413.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:53.234Z,1510167413.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:53.605Z,1510167413.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:53.621Z,1510167413.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:53.987Z,1510167413.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:54.013Z,1510167414.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:54.383Z,1510167414.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:54.423Z,1510167414.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:54.812Z,1510167414.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:54.818Z,1510167414.818 [PNI_TCM](ERROR): CRC does not match. Expected:0x60558 got:0x49164
2017-11-08T18:56:54.857Z,1510167414.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:55.208Z,1510167415.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:55.224Z,1510167415.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:55.612Z,1510167415.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:55.629Z,1510167415.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:55.997Z,1510167415.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:56.017Z,1510167416.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:56.388Z,1510167416.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:56.417Z,1510167416.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:56.805Z,1510167416.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:56.822Z,1510167416.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:57.207Z,1510167417.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:57.224Z,1510167417.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:57.610Z,1510167417.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:57.627Z,1510167417.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:57.997Z,1510167417.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:58.021Z,1510167418.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:58.397Z,1510167418.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:58.413Z,1510167418.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:58.808Z,1510167418.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:58.824Z,1510167418.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:59.207Z,1510167419.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:59.228Z,1510167419.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:59.607Z,1510167419.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:56:59.663Z,1510167419.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:56:59.986Z,1510167419.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:00.020Z,1510167420.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:00.396Z,1510167420.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:00.412Z,1510167420.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:00.801Z,1510167420.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:00.820Z,1510167420.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:01.207Z,1510167421.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:01.224Z,1510167421.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:01.607Z,1510167421.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:01.629Z,1510167421.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:01.999Z,1510167421.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:02.016Z,1510167422.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:02.019Z,1510167422.019 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T18:52:01.8Z
2017-11-08T18:57:02.019Z,1510167422.019 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T18:57:02.019Z,1510167422.019 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T18:57:05.072Z,1510167425.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:05.088Z,1510167425.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:05.663Z,1510167425.663 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171108T132236/Courier0080.lzma
2017-11-08T18:57:05.707Z,1510167425.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:05.724Z,1510167425.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:05.859Z,1510167425.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:05.891Z,1510167425.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:06.260Z,1510167426.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:06.276Z,1510167426.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:06.613Z,1510167426.613 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0080.lzma.bak
2017-11-08T18:57:06.614Z,1510167426.614 [DataOverHttps](INFO): SBD MOMSN=5223271
2017-11-08T18:57:06.657Z,1510167426.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:06.674Z,1510167426.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:07.709Z,1510167427.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:07.726Z,1510167427.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:07.827Z,1510167427.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:07.871Z,1510167427.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:10.963Z,1510167430.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:10.980Z,1510167430.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:11.119Z,1510167431.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:11.159Z,1510167431.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:11.511Z,1510167431.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:11.596Z,1510167431.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:11.902Z,1510167431.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:11.919Z,1510167431.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:12.322Z,1510167432.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:12.380Z,1510167432.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:12.701Z,1510167432.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:12.717Z,1510167432.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:15.789Z,1510167435.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:15.840Z,1510167435.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:15.987Z,1510167435.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:16.011Z,1510167436.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:16.348Z,1510167436.348 [DataOverHttps](INFO): Sending 219 bytes from file Logs/20171108T132236/Express0081.lzma
2017-11-08T18:57:16.390Z,1510167436.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:16.414Z,1510167436.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:16.771Z,1510167436.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:16.813Z,1510167436.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:17.145Z,1510167437.145 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0081.lzma.bak
2017-11-08T18:57:17.146Z,1510167437.146 [DataOverHttps](INFO): SBD MOMSN=5223273
2017-11-08T18:57:17.182Z,1510167437.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:17.212Z,1510167437.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:18.160Z,1510167438.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:18.176Z,1510167438.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:18.179Z,1510167438.179 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T18:57:18.179Z,1510167438.179 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T18:57:18.179Z,1510167438.179 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T18:57:18.298Z,1510167438.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:18.325Z,1510167438.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:21.386Z,1510167441.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:21.410Z,1510167441.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:21.538Z,1510167441.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:21.572Z,1510167441.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:21.923Z,1510167441.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:21.940Z,1510167441.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:22.328Z,1510167442.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:22.344Z,1510167442.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:22.722Z,1510167442.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:22.738Z,1510167442.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:23.134Z,1510167443.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:23.170Z,1510167443.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:23.533Z,1510167443.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:23.549Z,1510167443.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:23.934Z,1510167443.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:23.983Z,1510167443.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:24.319Z,1510167444.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:24.420Z,1510167444.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:24.720Z,1510167444.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:24.890Z,1510167444.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:25.123Z,1510167445.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:25.154Z,1510167445.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:25.523Z,1510167445.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:25.553Z,1510167445.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:25.933Z,1510167445.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:25.950Z,1510167445.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:26.334Z,1510167446.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:26.350Z,1510167446.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:26.732Z,1510167446.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:26.748Z,1510167446.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:27.127Z,1510167447.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:27.143Z,1510167447.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:27.526Z,1510167447.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:27.548Z,1510167447.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:27.925Z,1510167447.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:27.948Z,1510167447.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:28.320Z,1510167448.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:28.336Z,1510167448.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:28.723Z,1510167448.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:28.740Z,1510167448.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:29.134Z,1510167449.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:29.164Z,1510167449.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:29.537Z,1510167449.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:29.570Z,1510167449.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:29.930Z,1510167449.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:29.947Z,1510167449.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:30.323Z,1510167450.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:30.344Z,1510167450.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:30.722Z,1510167450.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:30.738Z,1510167450.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:31.123Z,1510167451.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:31.148Z,1510167451.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:31.522Z,1510167451.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:31.540Z,1510167451.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:31.933Z,1510167451.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:31.976Z,1510167451.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:32.330Z,1510167452.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:32.352Z,1510167452.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:32.730Z,1510167452.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:32.752Z,1510167452.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:33.122Z,1510167453.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:33.139Z,1510167453.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:33.518Z,1510167453.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:33.550Z,1510167453.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:33.925Z,1510167453.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:33.948Z,1510167453.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:34.326Z,1510167454.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:34.342Z,1510167454.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:34.719Z,1510167454.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:34.741Z,1510167454.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:35.132Z,1510167455.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:35.148Z,1510167455.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:35.535Z,1510167455.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:35.555Z,1510167455.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:35.935Z,1510167455.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:36.023Z,1510167456.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:36.319Z,1510167456.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:36.348Z,1510167456.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:36.719Z,1510167456.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:36.782Z,1510167456.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:37.120Z,1510167457.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:37.151Z,1510167457.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:37.519Z,1510167457.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:37.578Z,1510167457.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:37.937Z,1510167457.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:37.953Z,1510167457.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:38.336Z,1510167458.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:38.352Z,1510167458.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:38.736Z,1510167458.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:38.752Z,1510167458.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:39.119Z,1510167459.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:39.145Z,1510167459.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:39.515Z,1510167459.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:39.546Z,1510167459.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:39.930Z,1510167459.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:39.946Z,1510167459.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:40.329Z,1510167460.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:40.345Z,1510167460.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:40.716Z,1510167460.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:40.752Z,1510167460.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:41.136Z,1510167461.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:41.152Z,1510167461.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:41.541Z,1510167461.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:41.556Z,1510167461.556 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:41.557Z,1510167461.557 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 111
2017-11-08T18:57:41.557Z,1510167461.557 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T18:57:41.558Z,1510167461.558 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:41.559Z,1510167461.559 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 111
2017-11-08T18:57:41.559Z,1510167461.559 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T18:57:41.560Z,1510167461.560 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:41.560Z,1510167461.560 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 111
2017-11-08T18:57:41.560Z,1510167461.560 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T18:57:41.665Z,1510167461.665 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T18:57:41.665Z,1510167461.665 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T18:57:41.665Z,1510167461.665 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T18:57:41.937Z,1510167461.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:42.033Z,1510167462.033 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T18:57:42.033Z,1510167462.033 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 111
2017-11-08T18:57:42.034Z,1510167462.034 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T18:57:42.034Z,1510167462.034 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 111
2017-11-08T18:57:42.034Z,1510167462.034 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T18:57:42.034Z,1510167462.034 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 111
2017-11-08T18:57:42.315Z,1510167462.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:42.349Z,1510167462.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T18:57:42.350Z,1510167462.350 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:57:42.350Z,1510167462.350 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:57:42.351Z,1510167462.351 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T18:57:42.351Z,1510167462.351 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:57:42.351Z,1510167462.351 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:57:42.352Z,1510167462.352 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T18:57:42.352Z,1510167462.352 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T18:57:42.353Z,1510167462.353 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T18:57:42.719Z,1510167462.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:42.754Z,1510167462.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T18:57:42.755Z,1510167462.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:43.120Z,1510167463.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:43.151Z,1510167463.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T18:57:43.152Z,1510167463.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:43.519Z,1510167463.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:43.550Z,1510167463.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T18:57:43.551Z,1510167463.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:43.941Z,1510167463.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:43.956Z,1510167463.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T18:57:43.957Z,1510167463.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:44.336Z,1510167464.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:44.359Z,1510167464.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T18:57:44.360Z,1510167464.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:44.735Z,1510167464.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:44.752Z,1510167464.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T18:57:44.753Z,1510167464.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:45.115Z,1510167465.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:45.151Z,1510167465.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T18:57:45.152Z,1510167465.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:45.515Z,1510167465.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:45.551Z,1510167465.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T18:57:45.552Z,1510167465.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:45.919Z,1510167465.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:45.975Z,1510167465.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T18:57:45.976Z,1510167465.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:46.316Z,1510167466.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:46.361Z,1510167466.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T18:57:46.362Z,1510167466.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:46.719Z,1510167466.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:46.759Z,1510167466.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T18:57:46.760Z,1510167466.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:47.129Z,1510167467.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:47.158Z,1510167467.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T18:57:47.159Z,1510167467.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:47.537Z,1510167467.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:47.571Z,1510167467.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T18:57:47.572Z,1510167467.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:47.934Z,1510167467.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:47.965Z,1510167467.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T18:57:47.966Z,1510167467.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:48.323Z,1510167468.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:48.343Z,1510167468.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T18:57:48.344Z,1510167468.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:48.722Z,1510167468.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:48.737Z,1510167468.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T18:57:48.738Z,1510167468.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:49.123Z,1510167469.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:49.143Z,1510167469.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T18:57:49.144Z,1510167469.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:49.522Z,1510167469.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:49.538Z,1510167469.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T18:57:49.539Z,1510167469.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:49.929Z,1510167469.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:49.945Z,1510167469.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T18:57:49.946Z,1510167469.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:50.330Z,1510167470.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:50.351Z,1510167470.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T18:57:50.353Z,1510167470.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:50.730Z,1510167470.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:50.751Z,1510167470.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T18:57:50.752Z,1510167470.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:51.126Z,1510167471.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:51.141Z,1510167471.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T18:57:51.142Z,1510167471.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:51.515Z,1510167471.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:51.545Z,1510167471.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T18:57:51.546Z,1510167471.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:51.919Z,1510167471.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:51.947Z,1510167471.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T18:57:51.949Z,1510167471.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:52.316Z,1510167472.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:52.341Z,1510167472.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T18:57:52.342Z,1510167472.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:52.719Z,1510167472.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:52.751Z,1510167472.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T18:57:52.752Z,1510167472.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:53.134Z,1510167473.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:53.158Z,1510167473.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T18:57:53.159Z,1510167473.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:53.539Z,1510167473.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:53.555Z,1510167473.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T18:57:53.556Z,1510167473.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:53.936Z,1510167473.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:53.952Z,1510167473.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T18:57:53.953Z,1510167473.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:54.315Z,1510167474.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:54.345Z,1510167474.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T18:57:54.346Z,1510167474.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:54.421Z,1510167474.421 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:57:54.421Z,1510167474.421 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T18:57:54.685Z,1510167474.685 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:57:54.685Z,1510167474.685 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:57:54.685Z,1510167474.685 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:57:54.685Z,1510167474.685 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T18:57:54.685Z,1510167474.685 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:57:54.715Z,1510167474.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:54.752Z,1510167474.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T18:57:54.753Z,1510167474.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:54.841Z,1510167474.841 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:57:55.089Z,1510167475.089 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:57:55.150Z,1510167475.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:55.193Z,1510167475.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T18:57:55.195Z,1510167475.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:55.307Z,1510167475.307 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:57:55.519Z,1510167475.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:55.536Z,1510167475.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T18:57:55.537Z,1510167475.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:55.933Z,1510167475.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:55.966Z,1510167475.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T18:57:55.967Z,1510167475.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:56.338Z,1510167476.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:56.363Z,1510167476.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T18:57:56.364Z,1510167476.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:56.734Z,1510167476.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:56.766Z,1510167476.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T18:57:56.767Z,1510167476.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:56.841Z,1510167476.841 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:57:56.841Z,1510167476.841 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T18:57:56.921Z,1510167476.921 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:57:56.921Z,1510167476.921 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:57:56.921Z,1510167476.921 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:57:56.921Z,1510167476.921 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T18:57:56.922Z,1510167476.922 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:57:57.118Z,1510167477.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:57.134Z,1510167477.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T18:57:57.134Z,1510167477.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:57.237Z,1510167477.237 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:57:57.325Z,1510167477.325 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:57:57.412Z,1510167477.412 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:57:57.527Z,1510167477.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:57.566Z,1510167477.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T18:57:57.567Z,1510167477.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:57.923Z,1510167477.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:57.998Z,1510167477.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T18:57:57.000Z,1510167478.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:58.323Z,1510167478.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:58.343Z,1510167478.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T18:57:58.344Z,1510167478.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:58.728Z,1510167478.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:58.813Z,1510167478.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T18:57:58.814Z,1510167478.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:58.893Z,1510167478.893 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:57:58.893Z,1510167478.893 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T18:57:59.029Z,1510167479.029 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:57:59.029Z,1510167479.029 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:57:59.029Z,1510167479.029 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:57:59.030Z,1510167479.030 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T18:57:59.030Z,1510167479.030 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:57:59.134Z,1510167479.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:59.168Z,1510167479.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T18:57:59.169Z,1510167479.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:59.245Z,1510167479.245 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:57:59.433Z,1510167479.433 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:57:59.540Z,1510167479.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:59.574Z,1510167479.574 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:57:59.613Z,1510167479.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T18:57:59.614Z,1510167479.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:57:59.934Z,1510167479.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:57:59.966Z,1510167479.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T18:57:59.967Z,1510167479.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:00.322Z,1510167480.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:00.339Z,1510167480.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T18:58:00.340Z,1510167480.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:00.725Z,1510167480.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:00.741Z,1510167480.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T18:58:00.742Z,1510167480.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:00.848Z,1510167480.848 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:58:00.848Z,1510167480.848 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T18:58:01.126Z,1510167481.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:01.142Z,1510167481.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T18:58:01.143Z,1510167481.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:01.189Z,1510167481.189 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:58:01.189Z,1510167481.189 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:58:01.190Z,1510167481.190 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:58:01.190Z,1510167481.190 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T18:58:01.190Z,1510167481.190 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:58:01.233Z,1510167481.233 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:58:01.525Z,1510167481.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:01.542Z,1510167481.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-08T18:58:01.543Z,1510167481.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:01.593Z,1510167481.593 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:58:01.711Z,1510167481.711 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:58:01.941Z,1510167481.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:01.960Z,1510167481.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:02.334Z,1510167482.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:02.356Z,1510167482.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:02.744Z,1510167482.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:02.761Z,1510167482.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:03.127Z,1510167483.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:03.142Z,1510167483.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:03.253Z,1510167483.253 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T18:58:03.253Z,1510167483.253 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T18:58:03.325Z,1510167483.325 [Rowe_600LCM](INFO): Initializing
2017-11-08T18:58:03.325Z,1510167483.325 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T18:58:03.325Z,1510167483.325 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T18:58:03.325Z,1510167483.325 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T18:58:03.325Z,1510167483.325 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T18:58:03.519Z,1510167483.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:03.536Z,1510167483.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:03.625Z,1510167483.625 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:58:03.625Z,1510167483.625 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T18:58:03.729Z,1510167483.729 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T18:58:03.819Z,1510167483.819 [Rowe_600LCM](INFO): Powering down
2017-11-08T18:58:03.928Z,1510167483.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:03.967Z,1510167483.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:04.324Z,1510167484.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:04.340Z,1510167484.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:04.724Z,1510167484.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:04.741Z,1510167484.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:05.134Z,1510167485.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:05.167Z,1510167485.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:05.530Z,1510167485.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:05.546Z,1510167485.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:05.930Z,1510167485.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:05.947Z,1510167485.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:06.323Z,1510167486.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:06.340Z,1510167486.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:06.722Z,1510167486.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:06.739Z,1510167486.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:07.125Z,1510167487.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:07.142Z,1510167487.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:07.523Z,1510167487.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:07.550Z,1510167487.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:07.934Z,1510167487.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:07.992Z,1510167487.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:08.331Z,1510167488.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:08.347Z,1510167488.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:08.730Z,1510167488.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:08.747Z,1510167488.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:09.122Z,1510167489.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:09.143Z,1510167489.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:09.523Z,1510167489.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:09.541Z,1510167489.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:09.924Z,1510167489.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:09.948Z,1510167489.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:10.326Z,1510167490.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:10.342Z,1510167490.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:10.724Z,1510167490.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:10.740Z,1510167490.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:11.130Z,1510167491.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:11.147Z,1510167491.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:11.529Z,1510167491.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:11.545Z,1510167491.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:11.926Z,1510167491.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:11.943Z,1510167491.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:12.322Z,1510167492.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:12.343Z,1510167492.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:12.725Z,1510167492.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:12.741Z,1510167492.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:13.124Z,1510167493.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:13.141Z,1510167493.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:13.524Z,1510167493.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:13.548Z,1510167493.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:13.932Z,1510167493.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:13.948Z,1510167493.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:14.330Z,1510167494.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:14.346Z,1510167494.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:14.726Z,1510167494.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:14.747Z,1510167494.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:15.122Z,1510167495.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:15.138Z,1510167495.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:15.525Z,1510167495.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:15.542Z,1510167495.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:15.925Z,1510167495.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:15.941Z,1510167495.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:16.326Z,1510167496.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:16.342Z,1510167496.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:16.721Z,1510167496.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:16.738Z,1510167496.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:17.130Z,1510167497.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:17.147Z,1510167497.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:17.533Z,1510167497.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:17.550Z,1510167497.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:17.938Z,1510167497.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:17.974Z,1510167497.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:18.324Z,1510167498.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:18.344Z,1510167498.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:18.726Z,1510167498.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:18.742Z,1510167498.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:21.825Z,1510167501.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:21.923Z,1510167501.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:22.047Z,1510167502.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:22.080Z,1510167502.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:22.454Z,1510167502.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:22.488Z,1510167502.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:22.858Z,1510167502.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:22.908Z,1510167502.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:23.254Z,1510167503.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:23.287Z,1510167503.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:23.641Z,1510167503.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:23.694Z,1510167503.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:24.041Z,1510167504.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:24.057Z,1510167504.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:24.442Z,1510167504.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:24.459Z,1510167504.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:24.853Z,1510167504.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:24.870Z,1510167504.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:25.254Z,1510167505.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:25.270Z,1510167505.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:25.650Z,1510167505.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:25.666Z,1510167505.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:26.042Z,1510167506.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:26.058Z,1510167506.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:26.438Z,1510167506.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:26.467Z,1510167506.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:26.845Z,1510167506.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:26.861Z,1510167506.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:27.246Z,1510167507.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:27.262Z,1510167507.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:27.645Z,1510167507.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:27.661Z,1510167507.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:28.050Z,1510167508.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:28.066Z,1510167508.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:28.449Z,1510167508.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:28.465Z,1510167508.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:28.850Z,1510167508.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:28.866Z,1510167508.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:29.244Z,1510167509.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:29.261Z,1510167509.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:29.646Z,1510167509.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:29.662Z,1510167509.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:30.043Z,1510167510.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:30.059Z,1510167510.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:30.443Z,1510167510.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:30.471Z,1510167510.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:30.850Z,1510167510.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:30.866Z,1510167510.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:31.254Z,1510167511.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:31.275Z,1510167511.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:31.651Z,1510167511.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:31.667Z,1510167511.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:32.046Z,1510167512.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:32.095Z,1510167512.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:32.444Z,1510167512.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:32.461Z,1510167512.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:32.844Z,1510167512.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:32.861Z,1510167512.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:33.245Z,1510167513.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:33.262Z,1510167513.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:33.644Z,1510167513.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:33.662Z,1510167513.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:34.050Z,1510167514.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:34.067Z,1510167514.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:34.453Z,1510167514.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:34.470Z,1510167514.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:34.854Z,1510167514.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:34.870Z,1510167514.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:35.244Z,1510167515.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:35.268Z,1510167515.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:35.644Z,1510167515.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:35.660Z,1510167515.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:36.045Z,1510167516.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:36.062Z,1510167516.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:36.443Z,1510167516.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:36.464Z,1510167516.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:36.849Z,1510167516.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:36.866Z,1510167516.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:37.254Z,1510167517.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:37.270Z,1510167517.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:37.650Z,1510167517.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:37.666Z,1510167517.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:38.045Z,1510167518.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:38.061Z,1510167518.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:38.438Z,1510167518.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:38.466Z,1510167518.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:38.844Z,1510167518.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:38.868Z,1510167518.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:39.253Z,1510167519.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:39.271Z,1510167519.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:39.644Z,1510167519.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:39.668Z,1510167519.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:40.050Z,1510167520.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:40.067Z,1510167520.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:40.455Z,1510167520.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:40.499Z,1510167520.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:40.856Z,1510167520.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:40.893Z,1510167520.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:41.248Z,1510167521.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:41.273Z,1510167521.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:41.649Z,1510167521.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:41.674Z,1510167521.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:42.042Z,1510167522.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:42.076Z,1510167522.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:42.441Z,1510167522.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:42.482Z,1510167522.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:42.850Z,1510167522.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:42.886Z,1510167522.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:43.254Z,1510167523.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:43.280Z,1510167523.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:43.654Z,1510167523.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:43.687Z,1510167523.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:44.039Z,1510167524.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:44.102Z,1510167524.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:44.442Z,1510167524.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:44.507Z,1510167524.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:44.838Z,1510167524.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:44.863Z,1510167524.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:45.246Z,1510167525.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:45.302Z,1510167525.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:45.644Z,1510167525.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:45.668Z,1510167525.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:46.050Z,1510167526.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:46.103Z,1510167526.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:46.454Z,1510167526.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:46.470Z,1510167526.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:46.850Z,1510167526.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:46.866Z,1510167526.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:47.244Z,1510167527.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:47.267Z,1510167527.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:47.645Z,1510167527.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:47.661Z,1510167527.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:48.045Z,1510167528.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:48.061Z,1510167528.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:48.444Z,1510167528.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:48.460Z,1510167528.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:48.854Z,1510167528.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:48.870Z,1510167528.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:49.254Z,1510167529.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:49.270Z,1510167529.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:49.650Z,1510167529.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:49.666Z,1510167529.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:50.045Z,1510167530.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:50.062Z,1510167530.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:50.445Z,1510167530.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:50.461Z,1510167530.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:50.849Z,1510167530.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:50.872Z,1510167530.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:51.253Z,1510167531.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:51.274Z,1510167531.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:51.641Z,1510167531.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:51.660Z,1510167531.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:52.066Z,1510167532.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:52.117Z,1510167532.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:52.458Z,1510167532.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:52.474Z,1510167532.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:52.858Z,1510167532.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:52.876Z,1510167532.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:53.249Z,1510167533.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:53.304Z,1510167533.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:53.640Z,1510167533.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:53.674Z,1510167533.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:54.052Z,1510167534.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:54.068Z,1510167534.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:54.452Z,1510167534.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:54.515Z,1510167534.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:54.863Z,1510167534.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:54.888Z,1510167534.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:55.279Z,1510167535.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:55.317Z,1510167535.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:55.658Z,1510167535.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:55.675Z,1510167535.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:56.040Z,1510167536.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:56.067Z,1510167536.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:56.439Z,1510167536.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:56.465Z,1510167536.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:56.847Z,1510167536.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:56.883Z,1510167536.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:57.255Z,1510167537.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:57.279Z,1510167537.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:57.643Z,1510167537.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:57.669Z,1510167537.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:58.066Z,1510167538.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:58.084Z,1510167538.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:58.452Z,1510167538.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:58.506Z,1510167538.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:58.866Z,1510167538.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:58.886Z,1510167538.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:59.254Z,1510167539.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:59.286Z,1510167539.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:58:59.646Z,1510167539.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:58:59.666Z,1510167539.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:00.049Z,1510167540.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:00.066Z,1510167540.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:00.447Z,1510167540.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:00.466Z,1510167540.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:00.857Z,1510167540.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:00.875Z,1510167540.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:01.256Z,1510167541.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:01.280Z,1510167541.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:01.655Z,1510167541.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:01.673Z,1510167541.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:02.046Z,1510167542.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:02.062Z,1510167542.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:02.446Z,1510167542.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:02.466Z,1510167542.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:02.845Z,1510167542.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:02.867Z,1510167542.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:03.252Z,1510167543.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:03.271Z,1510167543.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:03.654Z,1510167543.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:03.676Z,1510167543.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:04.061Z,1510167544.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:04.079Z,1510167544.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:04.466Z,1510167544.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:04.484Z,1510167544.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:04.861Z,1510167544.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:04.877Z,1510167544.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:05.241Z,1510167545.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:05.286Z,1510167545.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:05.635Z,1510167545.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:05.671Z,1510167545.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:06.037Z,1510167546.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:06.066Z,1510167546.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:06.444Z,1510167546.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:06.543Z,1510167546.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:06.851Z,1510167546.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:06.891Z,1510167546.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:07.257Z,1510167547.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:07.334Z,1510167547.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:07.656Z,1510167547.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:07.688Z,1510167547.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:08.046Z,1510167548.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:08.097Z,1510167548.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:08.447Z,1510167548.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:08.491Z,1510167548.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:08.847Z,1510167548.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:08.864Z,1510167548.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:09.251Z,1510167549.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:09.269Z,1510167549.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:09.658Z,1510167549.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:09.697Z,1510167549.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:10.057Z,1510167550.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:10.092Z,1510167550.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:10.455Z,1510167550.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:10.471Z,1510167550.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:10.852Z,1510167550.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:10.868Z,1510167550.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:11.243Z,1510167551.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:11.272Z,1510167551.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:11.639Z,1510167551.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:11.665Z,1510167551.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:12.036Z,1510167552.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:12.062Z,1510167552.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:12.439Z,1510167552.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:12.472Z,1510167552.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:12.856Z,1510167552.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:12.873Z,1510167552.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:13.260Z,1510167553.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:13.278Z,1510167553.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:13.662Z,1510167553.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:13.709Z,1510167553.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:14.039Z,1510167554.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:14.064Z,1510167554.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:14.439Z,1510167554.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:14.472Z,1510167554.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:14.839Z,1510167554.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:14.870Z,1510167554.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:15.236Z,1510167555.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:15.262Z,1510167555.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:15.640Z,1510167555.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:15.672Z,1510167555.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:16.055Z,1510167556.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:16.072Z,1510167556.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:16.457Z,1510167556.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:16.509Z,1510167556.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:16.856Z,1510167556.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:16.873Z,1510167556.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:17.239Z,1510167557.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:17.264Z,1510167557.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:17.639Z,1510167557.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:17.664Z,1510167557.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:18.040Z,1510167558.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:18.070Z,1510167558.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:18.443Z,1510167558.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:18.480Z,1510167558.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:18.860Z,1510167558.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:18.876Z,1510167558.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:22.106Z,1510167562.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:22.123Z,1510167562.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:22.260Z,1510167562.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:22.310Z,1510167562.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:22.640Z,1510167562.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:22.666Z,1510167562.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:23.036Z,1510167563.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:23.070Z,1510167563.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:23.439Z,1510167563.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:23.464Z,1510167563.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:23.880Z,1510167563.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:23.917Z,1510167563.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:24.256Z,1510167564.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:24.273Z,1510167564.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:24.656Z,1510167564.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:24.673Z,1510167564.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:25.036Z,1510167565.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:25.070Z,1510167565.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:25.431Z,1510167565.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:25.470Z,1510167565.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:25.836Z,1510167565.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:25.875Z,1510167565.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:26.231Z,1510167566.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:26.260Z,1510167566.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:26.631Z,1510167566.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:26.681Z,1510167566.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:27.047Z,1510167567.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:27.078Z,1510167567.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:27.447Z,1510167567.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:27.479Z,1510167567.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:27.848Z,1510167567.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:27.883Z,1510167567.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:28.231Z,1510167568.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:28.304Z,1510167568.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:28.645Z,1510167568.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:28.677Z,1510167568.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:29.039Z,1510167569.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:29.056Z,1510167569.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:29.439Z,1510167569.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:29.487Z,1510167569.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:29.849Z,1510167569.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:29.885Z,1510167569.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:30.254Z,1510167570.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:30.325Z,1510167570.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:30.646Z,1510167570.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:30.678Z,1510167570.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:31.040Z,1510167571.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:31.056Z,1510167571.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:31.440Z,1510167571.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:31.456Z,1510167571.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:31.842Z,1510167571.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:31.859Z,1510167571.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:32.245Z,1510167572.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:32.269Z,1510167572.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:32.637Z,1510167572.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:32.675Z,1510167572.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:33.053Z,1510167573.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:33.069Z,1510167573.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:33.453Z,1510167573.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:33.469Z,1510167573.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:33.855Z,1510167573.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:33.871Z,1510167573.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:34.235Z,1510167574.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:34.271Z,1510167574.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:34.631Z,1510167574.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:34.673Z,1510167574.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:35.036Z,1510167575.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:35.072Z,1510167575.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:35.435Z,1510167575.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:35.451Z,1510167575.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:35.845Z,1510167575.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:35.877Z,1510167575.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:36.250Z,1510167576.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:36.276Z,1510167576.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:36.650Z,1510167576.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:36.686Z,1510167576.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:37.031Z,1510167577.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:37.051Z,1510167577.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:37.439Z,1510167577.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:37.455Z,1510167577.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:37.838Z,1510167577.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:37.855Z,1510167577.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:38.235Z,1510167578.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:38.251Z,1510167578.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:38.639Z,1510167578.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:38.726Z,1510167578.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:39.050Z,1510167579.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:39.074Z,1510167579.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:39.454Z,1510167579.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:39.478Z,1510167579.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:39.850Z,1510167579.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:39.873Z,1510167579.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:40.240Z,1510167580.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:40.280Z,1510167580.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:40.635Z,1510167580.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:40.651Z,1510167580.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:41.039Z,1510167581.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:41.056Z,1510167581.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:41.439Z,1510167581.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:41.460Z,1510167581.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:41.849Z,1510167581.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:41.887Z,1510167581.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:42.255Z,1510167582.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:42.291Z,1510167582.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:42.650Z,1510167582.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:42.682Z,1510167582.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:43.039Z,1510167583.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:43.059Z,1510167583.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:43.441Z,1510167583.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:43.457Z,1510167583.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:43.861Z,1510167583.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:43.912Z,1510167583.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:44.238Z,1510167584.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:44.254Z,1510167584.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:44.642Z,1510167584.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:44.658Z,1510167584.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:45.050Z,1510167585.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:45.066Z,1510167585.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:45.450Z,1510167585.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:45.466Z,1510167585.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:45.856Z,1510167585.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:45.873Z,1510167585.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:46.240Z,1510167586.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:46.261Z,1510167586.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:46.650Z,1510167586.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:46.666Z,1510167586.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:47.042Z,1510167587.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:47.058Z,1510167587.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:47.439Z,1510167587.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:47.461Z,1510167587.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:47.851Z,1510167587.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:47.871Z,1510167587.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:48.251Z,1510167588.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:48.271Z,1510167588.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:48.650Z,1510167588.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:48.667Z,1510167588.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:49.052Z,1510167589.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:49.068Z,1510167589.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:49.435Z,1510167589.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:49.469Z,1510167589.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:49.835Z,1510167589.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:49.870Z,1510167589.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:50.240Z,1510167590.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:50.275Z,1510167590.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:50.636Z,1510167590.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:50.702Z,1510167590.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:51.046Z,1510167591.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:51.074Z,1510167591.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:51.453Z,1510167591.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:51.483Z,1510167591.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:51.851Z,1510167591.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:51.908Z,1510167591.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:52.239Z,1510167592.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:52.255Z,1510167592.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:52.635Z,1510167592.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:52.688Z,1510167592.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:53.054Z,1510167593.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:53.087Z,1510167593.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:53.442Z,1510167593.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:53.487Z,1510167593.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:53.852Z,1510167593.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:53.938Z,1510167593.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:54.247Z,1510167594.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:54.264Z,1510167594.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:54.647Z,1510167594.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:54.664Z,1510167594.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:55.042Z,1510167595.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:55.057Z,1510167595.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:55.503Z,1510167595.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:55.528Z,1510167595.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:55.854Z,1510167595.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:55.870Z,1510167595.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:56.236Z,1510167596.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:56.265Z,1510167596.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:56.637Z,1510167596.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:56.681Z,1510167596.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:57.081Z,1510167597.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:57.120Z,1510167597.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:57.452Z,1510167597.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:57.492Z,1510167597.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:57.847Z,1510167597.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:57.883Z,1510167597.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:58.240Z,1510167598.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:58.277Z,1510167598.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:58.650Z,1510167598.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:58.700Z,1510167598.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:59.043Z,1510167599.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:59.060Z,1510167599.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:59.438Z,1510167599.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:59.455Z,1510167599.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T18:59:59.849Z,1510167599.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T18:59:59.868Z,1510167599.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:00.246Z,1510167600.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:00.267Z,1510167600.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:00.654Z,1510167600.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:00.671Z,1510167600.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:01.032Z,1510167601.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:01.089Z,1510167601.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:01.446Z,1510167601.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:01.463Z,1510167601.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:01.837Z,1510167601.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:01.865Z,1510167601.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:02.244Z,1510167602.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:02.260Z,1510167602.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:02.632Z,1510167602.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:02.669Z,1510167602.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:03.050Z,1510167603.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:03.072Z,1510167603.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:03.453Z,1510167603.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:03.475Z,1510167603.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:03.854Z,1510167603.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:03.870Z,1510167603.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:04.235Z,1510167604.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:04.267Z,1510167604.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:04.636Z,1510167604.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:04.667Z,1510167604.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:05.032Z,1510167605.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:05.067Z,1510167605.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:05.435Z,1510167605.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:05.468Z,1510167605.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:05.856Z,1510167605.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:05.873Z,1510167605.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:06.252Z,1510167606.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:06.269Z,1510167606.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:06.650Z,1510167606.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:06.672Z,1510167606.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:07.039Z,1510167607.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:07.065Z,1510167607.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:07.435Z,1510167607.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:07.466Z,1510167607.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:07.835Z,1510167607.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:07.867Z,1510167607.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:08.232Z,1510167608.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:08.270Z,1510167608.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:08.635Z,1510167608.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:08.666Z,1510167608.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:09.056Z,1510167609.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:09.072Z,1510167609.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:09.455Z,1510167609.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:09.476Z,1510167609.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:09.852Z,1510167609.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:09.868Z,1510167609.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:10.237Z,1510167610.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:10.267Z,1510167610.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:10.635Z,1510167610.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:10.671Z,1510167610.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:11.032Z,1510167611.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:11.065Z,1510167611.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:11.439Z,1510167611.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:11.472Z,1510167611.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:11.845Z,1510167611.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:11.900Z,1510167611.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:12.249Z,1510167612.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:12.276Z,1510167612.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:12.650Z,1510167612.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:12.676Z,1510167612.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:13.039Z,1510167613.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:13.093Z,1510167613.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:13.437Z,1510167613.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:13.453Z,1510167613.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:13.838Z,1510167613.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:13.854Z,1510167613.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:14.238Z,1510167614.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:14.291Z,1510167614.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:14.637Z,1510167614.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:14.653Z,1510167614.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:15.050Z,1510167615.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:15.116Z,1510167615.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:15.445Z,1510167615.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:15.461Z,1510167615.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:15.846Z,1510167615.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:15.862Z,1510167615.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:16.238Z,1510167616.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:16.260Z,1510167616.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:16.638Z,1510167616.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:16.654Z,1510167616.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:17.040Z,1510167617.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:17.056Z,1510167617.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:17.439Z,1510167617.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:17.455Z,1510167617.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:17.892Z,1510167617.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:17.943Z,1510167617.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:18.245Z,1510167618.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:18.261Z,1510167618.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:18.650Z,1510167618.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:18.690Z,1510167618.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:19.064Z,1510167619.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:19.097Z,1510167619.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:19.440Z,1510167619.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:19.456Z,1510167619.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:19.840Z,1510167619.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:19.856Z,1510167619.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:20.244Z,1510167620.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:20.292Z,1510167620.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:20.642Z,1510167620.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:20.668Z,1510167620.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:21.054Z,1510167621.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:21.070Z,1510167621.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:21.453Z,1510167621.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:21.469Z,1510167621.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:21.855Z,1510167621.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:21.871Z,1510167621.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:25.095Z,1510167625.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:25.145Z,1510167625.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:25.256Z,1510167625.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:25.272Z,1510167625.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:25.674Z,1510167625.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:25.708Z,1510167625.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:26.074Z,1510167626.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:26.107Z,1510167626.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:26.470Z,1510167626.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:26.496Z,1510167626.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:26.859Z,1510167626.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:26.876Z,1510167626.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:27.260Z,1510167627.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:27.276Z,1510167627.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:27.659Z,1510167627.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:27.680Z,1510167627.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:28.074Z,1510167628.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:28.106Z,1510167628.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:28.477Z,1510167628.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:28.505Z,1510167628.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:28.870Z,1510167628.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:28.902Z,1510167628.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:29.262Z,1510167629.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:29.280Z,1510167629.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:29.662Z,1510167629.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:29.678Z,1510167629.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:30.063Z,1510167630.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:30.084Z,1510167630.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:30.462Z,1510167630.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:30.478Z,1510167630.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:30.869Z,1510167630.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:30.885Z,1510167630.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:31.269Z,1510167631.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:31.286Z,1510167631.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:31.674Z,1510167631.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:31.706Z,1510167631.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:32.062Z,1510167632.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:32.078Z,1510167632.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:32.463Z,1510167632.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:32.480Z,1510167632.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:32.862Z,1510167632.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:32.878Z,1510167632.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:33.263Z,1510167633.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:33.283Z,1510167633.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:33.661Z,1510167633.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:33.679Z,1510167633.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:34.078Z,1510167634.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:34.116Z,1510167634.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:34.473Z,1510167634.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:34.490Z,1510167634.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:34.870Z,1510167634.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:34.886Z,1510167634.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:35.263Z,1510167635.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:35.284Z,1510167635.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:35.665Z,1510167635.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:35.682Z,1510167635.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:36.062Z,1510167636.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:36.079Z,1510167636.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:36.464Z,1510167636.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:36.532Z,1510167636.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:36.878Z,1510167636.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:36.912Z,1510167636.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:37.274Z,1510167637.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:37.290Z,1510167637.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:37.670Z,1510167637.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:37.686Z,1510167637.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:38.065Z,1510167638.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:38.081Z,1510167638.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:38.461Z,1510167638.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:38.477Z,1510167638.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:38.864Z,1510167638.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:38.881Z,1510167638.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:39.266Z,1510167639.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:39.286Z,1510167639.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:39.665Z,1510167639.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:39.681Z,1510167639.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:40.070Z,1510167640.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:40.086Z,1510167640.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:40.470Z,1510167640.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:40.478Z,1510167640.478 [BPC1](ERROR): Failed to receive battery data
2017-11-08T19:00:40.478Z,1510167640.478 [BPC1] Communications Fault, FailCount= 1
2017-11-08T19:00:40.478Z,1510167640.478 [BPC1](ERROR): Communications Fault
2017-11-08T19:00:40.488Z,1510167640.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:40.581Z,1510167640.581 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T19:00:40.870Z,1510167640.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:40.887Z,1510167640.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:41.263Z,1510167641.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:41.283Z,1510167641.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:41.669Z,1510167641.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:41.685Z,1510167641.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:41.769Z,1510167641.769 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T19:00:41.769Z,1510167641.769 [BPC1] No Fault, FailCount= 1
2017-11-08T19:00:42.066Z,1510167642.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:42.131Z,1510167642.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:42.466Z,1510167642.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:42.486Z,1510167642.486 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:42.486Z,1510167642.486 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 112
2017-11-08T19:00:42.486Z,1510167642.486 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T19:00:42.488Z,1510167642.488 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:42.488Z,1510167642.488 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 112
2017-11-08T19:00:42.488Z,1510167642.488 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T19:00:42.490Z,1510167642.490 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:42.490Z,1510167642.490 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 112
2017-11-08T19:00:42.490Z,1510167642.490 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T19:00:42.587Z,1510167642.587 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T19:00:42.588Z,1510167642.588 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T19:00:42.588Z,1510167642.588 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T19:00:42.870Z,1510167642.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:43.001Z,1510167643.001 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T19:00:43.001Z,1510167643.001 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 112
2017-11-08T19:00:43.001Z,1510167643.001 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T19:00:43.001Z,1510167643.001 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 112
2017-11-08T19:00:43.002Z,1510167643.002 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T19:00:43.002Z,1510167643.002 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 112
2017-11-08T19:00:43.274Z,1510167643.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:43.291Z,1510167643.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T19:00:43.292Z,1510167643.292 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:00:43.292Z,1510167643.292 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:00:43.293Z,1510167643.293 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T19:00:43.293Z,1510167643.293 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:00:43.293Z,1510167643.293 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:00:43.294Z,1510167643.294 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T19:00:43.294Z,1510167643.294 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:00:43.294Z,1510167643.294 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:00:43.684Z,1510167643.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:43.704Z,1510167643.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T19:00:43.705Z,1510167643.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:44.060Z,1510167644.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:44.087Z,1510167644.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T19:00:44.088Z,1510167644.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:44.463Z,1510167644.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:44.488Z,1510167644.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T19:00:44.489Z,1510167644.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:44.859Z,1510167644.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:44.889Z,1510167644.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T19:00:44.890Z,1510167644.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:45.264Z,1510167645.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:45.289Z,1510167645.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T19:00:45.290Z,1510167645.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:45.663Z,1510167645.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:45.717Z,1510167645.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T19:00:45.718Z,1510167645.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:46.072Z,1510167646.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:46.098Z,1510167646.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T19:00:46.099Z,1510167646.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:46.474Z,1510167646.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:46.507Z,1510167646.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T19:00:46.508Z,1510167646.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:46.874Z,1510167646.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:46.903Z,1510167646.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T19:00:46.905Z,1510167646.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:47.263Z,1510167647.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:47.306Z,1510167647.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T19:00:47.306Z,1510167647.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:47.660Z,1510167647.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:47.676Z,1510167647.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T19:00:47.693Z,1510167647.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:48.060Z,1510167648.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:48.076Z,1510167648.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T19:00:48.077Z,1510167648.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:48.473Z,1510167648.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:48.518Z,1510167648.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T19:00:48.519Z,1510167648.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:48.874Z,1510167648.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:48.905Z,1510167648.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T19:00:48.906Z,1510167648.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:49.278Z,1510167649.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:49.309Z,1510167649.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T19:00:49.310Z,1510167649.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:49.685Z,1510167649.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:49.716Z,1510167649.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T19:00:49.717Z,1510167649.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:50.064Z,1510167650.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:50.081Z,1510167650.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T19:00:50.082Z,1510167650.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:50.464Z,1510167650.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:50.521Z,1510167650.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T19:00:50.522Z,1510167650.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:50.866Z,1510167650.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:50.887Z,1510167650.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T19:00:50.888Z,1510167650.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:51.269Z,1510167651.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:51.285Z,1510167651.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T19:00:51.286Z,1510167651.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:51.661Z,1510167651.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:51.690Z,1510167651.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T19:00:51.691Z,1510167651.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:52.071Z,1510167652.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:52.088Z,1510167652.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T19:00:52.089Z,1510167652.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:52.471Z,1510167652.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:52.491Z,1510167652.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T19:00:52.492Z,1510167652.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:52.871Z,1510167652.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:52.887Z,1510167652.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T19:00:52.888Z,1510167652.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:53.281Z,1510167653.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:53.317Z,1510167653.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T19:00:53.318Z,1510167653.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:53.672Z,1510167653.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:53.694Z,1510167653.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T19:00:53.695Z,1510167653.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:54.066Z,1510167654.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:54.091Z,1510167654.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T19:00:54.092Z,1510167654.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:54.463Z,1510167654.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:54.490Z,1510167654.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T19:00:54.494Z,1510167654.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:54.899Z,1510167654.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:54.927Z,1510167654.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T19:00:54.937Z,1510167654.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:55.280Z,1510167655.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:55.297Z,1510167655.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T19:00:55.298Z,1510167655.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:55.676Z,1510167655.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:55.693Z,1510167655.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T19:00:55.694Z,1510167655.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:56.055Z,1510167656.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:56.087Z,1510167656.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T19:00:56.088Z,1510167656.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:56.460Z,1510167656.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:56.491Z,1510167656.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T19:00:56.493Z,1510167656.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:56.860Z,1510167656.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:56.893Z,1510167656.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T19:00:56.894Z,1510167656.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:57.256Z,1510167657.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:57.290Z,1510167657.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T19:00:57.291Z,1510167657.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:57.659Z,1510167657.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:57.684Z,1510167657.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T19:00:57.685Z,1510167657.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:58.077Z,1510167658.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:58.093Z,1510167658.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T19:00:58.094Z,1510167658.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:58.481Z,1510167658.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:58.497Z,1510167658.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T19:00:58.498Z,1510167658.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:58.882Z,1510167658.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:58.899Z,1510167658.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T19:00:58.900Z,1510167658.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:59.262Z,1510167659.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:59.299Z,1510167659.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T19:00:59.300Z,1510167659.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:00:59.657Z,1510167659.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:00:59.696Z,1510167659.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T19:00:59.697Z,1510167659.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:00.065Z,1510167660.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:00.094Z,1510167660.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T19:01:00.095Z,1510167660.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:00.460Z,1510167660.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:00.507Z,1510167660.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T19:01:00.508Z,1510167660.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:00.874Z,1510167660.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:00.926Z,1510167660.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T19:01:00.927Z,1510167660.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:01.271Z,1510167661.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:01.287Z,1510167661.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T19:01:01.288Z,1510167661.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:01.675Z,1510167661.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:01.711Z,1510167661.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T19:01:01.712Z,1510167661.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:02.066Z,1510167662.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:02.115Z,1510167662.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T19:01:02.117Z,1510167662.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:02.463Z,1510167662.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:02.488Z,1510167662.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:02.869Z,1510167662.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:02.937Z,1510167662.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:03.266Z,1510167663.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:03.282Z,1510167663.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:03.661Z,1510167663.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:03.683Z,1510167663.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:04.080Z,1510167664.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:04.118Z,1510167664.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:04.479Z,1510167664.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:04.496Z,1510167664.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:04.876Z,1510167664.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:04.892Z,1510167664.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:05.262Z,1510167665.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:05.293Z,1510167665.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:05.671Z,1510167665.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:05.697Z,1510167665.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:06.063Z,1510167666.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:06.093Z,1510167666.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:06.466Z,1510167666.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:06.507Z,1510167666.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:06.869Z,1510167666.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:06.901Z,1510167666.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:07.274Z,1510167667.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:07.305Z,1510167667.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:07.674Z,1510167667.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:07.704Z,1510167667.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:08.058Z,1510167668.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:08.074Z,1510167668.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:08.465Z,1510167668.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:08.481Z,1510167668.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:08.863Z,1510167668.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:08.880Z,1510167668.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:09.260Z,1510167669.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:09.276Z,1510167669.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:09.662Z,1510167669.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:09.679Z,1510167669.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:10.074Z,1510167670.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:10.106Z,1510167670.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:10.474Z,1510167670.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:10.520Z,1510167670.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:10.876Z,1510167670.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:10.923Z,1510167670.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:11.263Z,1510167671.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:11.320Z,1510167671.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:11.676Z,1510167671.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:11.692Z,1510167671.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:12.069Z,1510167672.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:12.095Z,1510167672.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:12.472Z,1510167672.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:12.496Z,1510167672.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:12.881Z,1510167672.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:12.948Z,1510167672.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:13.293Z,1510167673.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:13.324Z,1510167673.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:13.670Z,1510167673.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:13.708Z,1510167673.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:14.059Z,1510167674.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:14.096Z,1510167674.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:14.460Z,1510167674.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:14.492Z,1510167674.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:14.855Z,1510167674.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:14.871Z,1510167674.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:15.260Z,1510167675.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:15.276Z,1510167675.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:15.659Z,1510167675.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:15.680Z,1510167675.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:16.075Z,1510167676.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:16.108Z,1510167676.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:16.475Z,1510167676.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:16.495Z,1510167676.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:16.874Z,1510167676.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:16.896Z,1510167676.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:17.267Z,1510167677.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:17.283Z,1510167677.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:17.662Z,1510167677.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:17.684Z,1510167677.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:18.063Z,1510167678.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:18.084Z,1510167678.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:18.455Z,1510167678.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:18.476Z,1510167678.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:18.873Z,1510167678.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:18.901Z,1510167678.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:19.274Z,1510167679.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:19.299Z,1510167679.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:19.674Z,1510167679.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:19.708Z,1510167679.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:23.719Z,1510167683.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:23.823Z,1510167683.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:23.975Z,1510167683.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:24.006Z,1510167684.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:24.383Z,1510167684.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:24.447Z,1510167684.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:24.783Z,1510167684.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:24.843Z,1510167684.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:25.178Z,1510167685.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:25.243Z,1510167685.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:25.574Z,1510167685.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:25.594Z,1510167685.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:25.975Z,1510167685.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:25.996Z,1510167685.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:26.371Z,1510167686.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:26.420Z,1510167686.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:26.787Z,1510167686.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:26.822Z,1510167686.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:27.183Z,1510167687.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:27.199Z,1510167687.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:27.581Z,1510167687.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:27.598Z,1510167687.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:27.975Z,1510167687.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:28.024Z,1510167688.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:28.378Z,1510167688.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:28.407Z,1510167688.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:28.797Z,1510167688.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:28.836Z,1510167688.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:29.188Z,1510167689.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:29.222Z,1510167689.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:29.585Z,1510167689.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:29.613Z,1510167689.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:29.966Z,1510167689.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:30.016Z,1510167690.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:30.369Z,1510167690.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:30.407Z,1510167690.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:30.772Z,1510167690.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:30.826Z,1510167690.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:31.187Z,1510167691.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:31.236Z,1510167691.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:31.585Z,1510167691.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:31.627Z,1510167691.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:32.005Z,1510167692.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:32.028Z,1510167692.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:32.375Z,1510167692.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:32.423Z,1510167692.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:32.766Z,1510167692.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:32.828Z,1510167692.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:33.176Z,1510167693.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:33.214Z,1510167693.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:33.571Z,1510167693.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:33.624Z,1510167693.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:33.995Z,1510167693.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:34.012Z,1510167694.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:34.381Z,1510167694.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:34.422Z,1510167694.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:34.790Z,1510167694.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:34.817Z,1510167694.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:35.173Z,1510167695.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:35.213Z,1510167695.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:35.572Z,1510167695.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:35.579Z,1510167695.579 [PNI_TCM](ERROR): CRC does not match. Expected:0x35838 got:0x19975
2017-11-08T19:01:35.617Z,1510167695.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:35.969Z,1510167695.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:36.014Z,1510167696.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:36.371Z,1510167696.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:36.395Z,1510167696.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:36.768Z,1510167696.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:36.795Z,1510167696.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:37.176Z,1510167697.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:37.193Z,1510167697.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:37.582Z,1510167697.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:37.618Z,1510167697.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:37.978Z,1510167697.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:38.013Z,1510167698.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:38.371Z,1510167698.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:38.391Z,1510167698.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:38.772Z,1510167698.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:38.789Z,1510167698.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:39.174Z,1510167699.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:39.220Z,1510167699.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:39.575Z,1510167699.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:39.596Z,1510167699.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:39.995Z,1510167699.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:40.023Z,1510167700.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:40.396Z,1510167700.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:40.414Z,1510167700.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:40.788Z,1510167700.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:40.824Z,1510167700.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:41.167Z,1510167701.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:41.208Z,1510167701.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:41.567Z,1510167701.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:41.603Z,1510167701.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:41.974Z,1510167701.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:42.002Z,1510167702.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:42.369Z,1510167702.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:42.411Z,1510167702.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:42.768Z,1510167702.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:42.803Z,1510167702.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:43.193Z,1510167703.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:43.218Z,1510167703.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:43.596Z,1510167703.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:43.621Z,1510167703.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:43.985Z,1510167703.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:44.016Z,1510167704.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:44.373Z,1510167704.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:44.455Z,1510167704.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:44.782Z,1510167704.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:44.820Z,1510167704.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:45.178Z,1510167705.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:45.228Z,1510167705.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:45.573Z,1510167705.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:45.618Z,1510167705.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:45.979Z,1510167705.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:46.031Z,1510167706.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:46.387Z,1510167706.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:46.424Z,1510167706.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:46.789Z,1510167706.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:46.817Z,1510167706.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:47.171Z,1510167707.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:47.215Z,1510167707.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:47.576Z,1510167707.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:47.596Z,1510167707.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:47.971Z,1510167707.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:47.991Z,1510167707.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:48.380Z,1510167708.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:48.398Z,1510167708.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:48.771Z,1510167708.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:48.806Z,1510167708.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:49.188Z,1510167709.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:49.233Z,1510167709.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:49.592Z,1510167709.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:49.633Z,1510167709.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:49.993Z,1510167709.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:50.038Z,1510167710.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:50.387Z,1510167710.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:50.448Z,1510167710.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:50.771Z,1510167710.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:50.813Z,1510167710.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:51.172Z,1510167711.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:51.183Z,1510167711.183 [PNI_TCM](ERROR): CRC does not match. Expected:0x32126 got:0x6463
2017-11-08T19:01:51.229Z,1510167711.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:51.567Z,1510167711.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:51.614Z,1510167711.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:52.003Z,1510167712.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:52.022Z,1510167712.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:52.388Z,1510167712.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:52.426Z,1510167712.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:52.784Z,1510167712.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:52.819Z,1510167712.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:53.175Z,1510167713.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:53.209Z,1510167713.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:53.572Z,1510167713.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:53.618Z,1510167713.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:53.974Z,1510167713.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:54.004Z,1510167714.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:54.393Z,1510167714.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:54.461Z,1510167714.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:54.799Z,1510167714.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:54.819Z,1510167714.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:55.202Z,1510167715.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:55.226Z,1510167715.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:55.600Z,1510167715.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:55.630Z,1510167715.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:55.973Z,1510167715.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:56.018Z,1510167716.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:56.373Z,1510167716.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:56.407Z,1510167716.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:56.778Z,1510167716.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:56.839Z,1510167716.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:57.182Z,1510167717.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:57.230Z,1510167717.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:57.588Z,1510167717.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:57.658Z,1510167717.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:57.991Z,1510167717.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:58.033Z,1510167718.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:58.372Z,1510167718.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:58.408Z,1510167718.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:58.768Z,1510167718.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:58.805Z,1510167718.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:59.175Z,1510167719.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:59.220Z,1510167719.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:59.564Z,1510167719.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:01:59.609Z,1510167719.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:01:59.978Z,1510167719.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:00.018Z,1510167720.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:00.382Z,1510167720.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:00.411Z,1510167720.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:00.788Z,1510167720.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:00.823Z,1510167720.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:01.175Z,1510167721.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:01.218Z,1510167721.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:01.577Z,1510167721.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:01.627Z,1510167721.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:01.979Z,1510167721.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:02.019Z,1510167722.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:02.375Z,1510167722.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:02.396Z,1510167722.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:02.791Z,1510167722.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:02.869Z,1510167722.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:03.186Z,1510167723.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:03.227Z,1510167723.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:03.583Z,1510167723.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:03.598Z,1510167723.598 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-08T19:02:03.645Z,1510167723.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:03.979Z,1510167723.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:04.006Z,1510167724.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:04.378Z,1510167724.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:04.405Z,1510167724.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:04.778Z,1510167724.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:04.812Z,1510167724.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:05.188Z,1510167725.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:05.251Z,1510167725.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:05.593Z,1510167725.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:05.656Z,1510167725.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:05.985Z,1510167725.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:06.027Z,1510167726.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:06.366Z,1510167726.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:06.426Z,1510167726.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:06.777Z,1510167726.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:06.803Z,1510167726.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:07.179Z,1510167727.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:07.239Z,1510167727.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:07.565Z,1510167727.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:07.601Z,1510167727.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:07.997Z,1510167727.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:08.017Z,1510167728.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:08.380Z,1510167728.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:08.446Z,1510167728.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:08.791Z,1510167728.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:08.816Z,1510167728.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:09.174Z,1510167729.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:09.215Z,1510167729.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:09.567Z,1510167729.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:09.606Z,1510167729.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:09.973Z,1510167729.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:10.014Z,1510167730.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:10.369Z,1510167730.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:10.407Z,1510167730.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:10.778Z,1510167730.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:10.798Z,1510167730.798 [PNI_TCM](ERROR): CRC does not match. Expected:0x56482 got:0x2945
2017-11-08T19:02:10.824Z,1510167730.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:11.178Z,1510167731.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:11.221Z,1510167731.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:11.581Z,1510167731.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:11.600Z,1510167731.600 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-11-08T19:02:11.621Z,1510167731.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:11.980Z,1510167731.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:12.007Z,1510167732.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:12.381Z,1510167732.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:12.408Z,1510167732.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:12.769Z,1510167732.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:12.848Z,1510167732.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:13.167Z,1510167733.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:13.209Z,1510167733.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:13.586Z,1510167733.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:13.620Z,1510167733.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:13.986Z,1510167733.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:14.026Z,1510167734.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:14.380Z,1510167734.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:14.425Z,1510167734.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:14.779Z,1510167734.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:14.819Z,1510167734.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:15.170Z,1510167735.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:15.230Z,1510167735.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:15.574Z,1510167735.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:15.628Z,1510167735.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:15.973Z,1510167735.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:16.021Z,1510167736.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:16.368Z,1510167736.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:16.438Z,1510167736.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:16.784Z,1510167736.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:16.801Z,1510167736.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:17.183Z,1510167737.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:17.204Z,1510167737.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:17.587Z,1510167737.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:17.627Z,1510167737.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:17.974Z,1510167737.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:18.007Z,1510167738.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:18.383Z,1510167738.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:18.411Z,1510167738.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:18.415Z,1510167738.415 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T19:02:18.415Z,1510167738.415 [Default:CheckIn:C.Wait] Stopped
2017-11-08T19:02:18.415Z,1510167738.415 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T19:02:18.415Z,1510167738.415 [Default:CheckIn:D] Running Loop=1
2017-11-08T19:02:18.791Z,1510167738.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:18.807Z,1510167738.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:18.811Z,1510167738.811 [Default:CheckIn:D] Stopped
2017-11-08T19:02:18.811Z,1510167738.811 [Default:CheckIn:E] Running Loop=1
2017-11-08T19:02:19.190Z,1510167739.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:19.224Z,1510167739.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:19.251Z,1510167739.251 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 335.630501 min 
2017-11-08T19:02:19.252Z,1510167739.252 [Default:CheckIn:E] Stopped
2017-11-08T19:02:19.252Z,1510167739.252 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T19:02:19.252Z,1510167739.252 [Default:CheckIn] Stopped
2017-11-08T19:02:19.252Z,1510167739.252 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T19:02:19.252Z,1510167739.252 [Default:CheckIn](INFO): Running loop #21
2017-11-08T19:02:19.252Z,1510167739.252 [Default:CheckIn] Running Loop=21
2017-11-08T19:02:19.265Z,1510167739.265 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T19:02:19.265Z,1510167739.265 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T19:02:19.587Z,1510167739.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:19.596Z,1510167739.596 [PNI_TCM](ERROR): CRC does not match. Expected:0x15080 got:0x9243
2017-11-08T19:02:19.618Z,1510167739.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:22.938Z,1510167742.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:22.985Z,1510167742.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:23.128Z,1510167743.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:23.171Z,1510167743.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:23.538Z,1510167743.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:23.584Z,1510167743.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:23.941Z,1510167743.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:23.983Z,1510167743.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:24.338Z,1510167744.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:24.354Z,1510167744.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:24.748Z,1510167744.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:24.772Z,1510167744.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:25.133Z,1510167745.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:25.148Z,1510167745.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:25.528Z,1510167745.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:25.571Z,1510167745.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:25.950Z,1510167745.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:25.971Z,1510167745.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:26.348Z,1510167746.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:26.408Z,1510167746.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:26.748Z,1510167746.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:26.767Z,1510167746.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:27.123Z,1510167747.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:27.195Z,1510167747.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:27.523Z,1510167747.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:27.555Z,1510167747.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:27.926Z,1510167747.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:28.007Z,1510167748.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:28.328Z,1510167748.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:28.344Z,1510167748.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:28.724Z,1510167748.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:28.740Z,1510167748.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:29.138Z,1510167749.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:29.155Z,1510167749.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:29.542Z,1510167749.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:29.558Z,1510167749.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:29.937Z,1510167749.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:29.960Z,1510167749.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:30.332Z,1510167750.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:30.348Z,1510167750.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:30.732Z,1510167750.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:30.749Z,1510167750.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:31.130Z,1510167751.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:31.146Z,1510167751.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:31.522Z,1510167751.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:31.556Z,1510167751.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:31.939Z,1510167751.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:31.960Z,1510167751.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:32.339Z,1510167752.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:32.355Z,1510167752.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:32.746Z,1510167752.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:32.762Z,1510167752.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:33.137Z,1510167753.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:33.154Z,1510167753.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:33.538Z,1510167753.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:33.563Z,1510167753.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:33.920Z,1510167753.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:33.957Z,1510167753.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:34.332Z,1510167754.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:34.349Z,1510167754.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:34.719Z,1510167754.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:34.748Z,1510167754.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:35.139Z,1510167755.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:35.171Z,1510167755.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:35.547Z,1510167755.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:35.567Z,1510167755.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:35.943Z,1510167755.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:35.960Z,1510167755.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:36.337Z,1510167756.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:36.394Z,1510167756.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:36.723Z,1510167756.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:36.754Z,1510167756.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:37.124Z,1510167757.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:37.149Z,1510167757.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:37.534Z,1510167757.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:37.557Z,1510167757.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:37.945Z,1510167757.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:37.962Z,1510167757.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:38.343Z,1510167758.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:38.360Z,1510167758.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:38.745Z,1510167758.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:38.768Z,1510167758.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:39.124Z,1510167759.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:39.151Z,1510167759.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:39.523Z,1510167759.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:39.548Z,1510167759.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:39.919Z,1510167759.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:39.952Z,1510167759.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:40.323Z,1510167760.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:40.361Z,1510167760.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:40.719Z,1510167760.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:40.735Z,1510167760.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:41.130Z,1510167761.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:41.162Z,1510167761.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:41.537Z,1510167761.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:41.565Z,1510167761.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:41.939Z,1510167761.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:41.975Z,1510167761.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:42.323Z,1510167762.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:42.345Z,1510167762.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:42.736Z,1510167762.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:42.771Z,1510167762.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:43.129Z,1510167763.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:43.153Z,1510167763.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:43.537Z,1510167763.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:43.555Z,1510167763.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:43.942Z,1510167763.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:43.972Z,1510167763.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:44.345Z,1510167764.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:44.361Z,1510167764.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:44.740Z,1510167764.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:44.756Z,1510167764.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:45.123Z,1510167765.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:45.154Z,1510167765.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:45.524Z,1510167765.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:45.555Z,1510167765.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:45.923Z,1510167765.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:45.954Z,1510167765.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:46.328Z,1510167766.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:46.353Z,1510167766.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:46.725Z,1510167766.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:46.827Z,1510167766.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:47.135Z,1510167767.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:47.156Z,1510167767.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:47.538Z,1510167767.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:47.560Z,1510167767.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:47.939Z,1510167767.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:47.959Z,1510167767.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:48.329Z,1510167768.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:48.408Z,1510167768.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:48.727Z,1510167768.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:48.749Z,1510167768.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:49.131Z,1510167769.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:49.152Z,1510167769.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:49.529Z,1510167769.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:49.591Z,1510167769.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:49.938Z,1510167769.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:49.954Z,1510167769.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:50.339Z,1510167770.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:50.397Z,1510167770.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:50.739Z,1510167770.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:50.760Z,1510167770.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:51.128Z,1510167771.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:51.145Z,1510167771.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:51.531Z,1510167771.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:51.547Z,1510167771.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:51.930Z,1510167771.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:51.946Z,1510167771.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:52.326Z,1510167772.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:52.349Z,1510167772.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:52.730Z,1510167772.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:52.747Z,1510167772.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:53.135Z,1510167773.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:53.152Z,1510167773.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:53.542Z,1510167773.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:53.559Z,1510167773.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:53.943Z,1510167773.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:53.960Z,1510167773.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:54.329Z,1510167774.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:54.351Z,1510167774.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:54.727Z,1510167774.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:54.749Z,1510167774.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:55.132Z,1510167775.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:55.148Z,1510167775.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:55.534Z,1510167775.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:55.554Z,1510167775.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:55.641Z,1510167775.641 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T19:02:55.971Z,1510167775.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:56.019Z,1510167776.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:56.351Z,1510167776.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:56.371Z,1510167776.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:56.736Z,1510167776.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:56.767Z,1510167776.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:57.129Z,1510167777.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:57.178Z,1510167777.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:57.524Z,1510167777.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:57.571Z,1510167777.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:57.924Z,1510167777.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:57.963Z,1510167777.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:58.327Z,1510167778.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:58.344Z,1510167778.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:58.729Z,1510167778.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:58.778Z,1510167778.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:59.139Z,1510167779.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:59.176Z,1510167779.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:59.541Z,1510167779.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:59.566Z,1510167779.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:02:59.938Z,1510167779.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:02:59.971Z,1510167779.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:00.327Z,1510167780.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:00.348Z,1510167780.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:00.728Z,1510167780.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:00.744Z,1510167780.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:01.133Z,1510167781.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:01.163Z,1510167781.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:01.523Z,1510167781.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:01.550Z,1510167781.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:01.935Z,1510167781.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:01.951Z,1510167781.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:02.336Z,1510167782.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:02.357Z,1510167782.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:02.743Z,1510167782.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:02.795Z,1510167782.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:03.144Z,1510167783.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:03.188Z,1510167783.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:03.535Z,1510167783.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:03.562Z,1510167783.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:03.933Z,1510167783.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:04.010Z,1510167784.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:04.331Z,1510167784.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:04.366Z,1510167784.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:04.719Z,1510167784.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:04.764Z,1510167784.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:05.134Z,1510167785.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:05.161Z,1510167785.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:05.540Z,1510167785.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:05.587Z,1510167785.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:05.942Z,1510167785.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:05.981Z,1510167785.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:06.330Z,1510167786.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:06.347Z,1510167786.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:06.730Z,1510167786.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:06.752Z,1510167786.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:07.133Z,1510167787.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:07.150Z,1510167787.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:07.531Z,1510167787.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:07.552Z,1510167787.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:07.946Z,1510167787.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:07.986Z,1510167787.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:08.346Z,1510167788.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:08.386Z,1510167788.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:08.734Z,1510167788.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:08.756Z,1510167788.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:09.131Z,1510167789.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:09.151Z,1510167789.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:09.532Z,1510167789.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:09.555Z,1510167789.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:09.932Z,1510167789.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:09.950Z,1510167789.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:10.339Z,1510167790.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:10.357Z,1510167790.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:10.732Z,1510167790.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:10.749Z,1510167790.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:11.146Z,1510167791.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:11.203Z,1510167791.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:11.546Z,1510167791.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:11.579Z,1510167791.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:11.939Z,1510167791.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:11.988Z,1510167791.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:12.343Z,1510167792.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:12.373Z,1510167792.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:12.723Z,1510167792.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:12.784Z,1510167792.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:13.125Z,1510167793.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:13.141Z,1510167793.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:13.523Z,1510167793.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:13.540Z,1510167793.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:13.942Z,1510167793.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:13.970Z,1510167793.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:14.341Z,1510167794.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:14.370Z,1510167794.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:14.738Z,1510167794.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:14.778Z,1510167794.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:15.127Z,1510167795.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:15.148Z,1510167795.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:15.526Z,1510167795.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:15.541Z,1510167795.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:15.928Z,1510167795.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:15.945Z,1510167795.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:16.329Z,1510167796.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:16.345Z,1510167796.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:16.726Z,1510167796.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:16.747Z,1510167796.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:17.134Z,1510167797.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:17.151Z,1510167797.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:17.543Z,1510167797.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:17.621Z,1510167797.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:17.933Z,1510167797.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:17.960Z,1510167797.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:18.323Z,1510167798.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:18.364Z,1510167798.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:18.724Z,1510167798.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:18.740Z,1510167798.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:19.131Z,1510167799.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:19.146Z,1510167799.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:19.532Z,1510167799.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:19.557Z,1510167799.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:19.939Z,1510167799.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:19.964Z,1510167799.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:20.341Z,1510167800.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:20.357Z,1510167800.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:20.743Z,1510167800.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:20.759Z,1510167800.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:21.127Z,1510167801.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:21.197Z,1510167801.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:21.524Z,1510167801.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:21.619Z,1510167801.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:21.928Z,1510167801.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:21.945Z,1510167801.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:22.328Z,1510167802.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:22.345Z,1510167802.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:22.743Z,1510167802.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:22.780Z,1510167802.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:27.016Z,1510167807.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:27.033Z,1510167807.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:27.171Z,1510167807.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:27.208Z,1510167807.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:27.571Z,1510167807.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:27.578Z,1510167807.578 [PNI_TCM](ERROR): CRC does not match. Expected:0x64299 got:0x7490
2017-11-08T19:03:27.607Z,1510167807.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:27.947Z,1510167807.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:27.980Z,1510167807.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:28.345Z,1510167808.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:28.381Z,1510167808.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:28.743Z,1510167808.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:28.787Z,1510167808.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:29.158Z,1510167809.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:29.198Z,1510167809.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:29.562Z,1510167809.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:29.630Z,1510167809.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:29.957Z,1510167809.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:29.985Z,1510167809.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:30.343Z,1510167810.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:30.360Z,1510167810.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:30.744Z,1510167810.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:30.779Z,1510167810.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:31.147Z,1510167811.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:31.167Z,1510167811.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:31.547Z,1510167811.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:31.564Z,1510167811.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:31.959Z,1510167811.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:31.988Z,1510167811.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:32.358Z,1510167812.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:32.400Z,1510167812.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:32.758Z,1510167812.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:32.802Z,1510167812.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:33.152Z,1510167813.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:33.240Z,1510167813.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:33.547Z,1510167813.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:33.564Z,1510167813.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:33.956Z,1510167813.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:34.011Z,1510167814.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:34.347Z,1510167814.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:34.369Z,1510167814.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:34.749Z,1510167814.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:34.801Z,1510167814.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:35.158Z,1510167815.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:35.184Z,1510167815.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:35.558Z,1510167815.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:35.578Z,1510167815.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:35.959Z,1510167815.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:35.974Z,1510167815.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:36.350Z,1510167816.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:36.366Z,1510167816.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:36.747Z,1510167816.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:36.768Z,1510167816.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:37.146Z,1510167817.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:37.162Z,1510167817.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:37.549Z,1510167817.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:37.572Z,1510167817.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:37.958Z,1510167817.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:37.974Z,1510167817.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:38.360Z,1510167818.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:38.377Z,1510167818.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:38.763Z,1510167818.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:38.782Z,1510167818.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:39.165Z,1510167819.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:39.219Z,1510167819.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:39.560Z,1510167819.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:39.585Z,1510167819.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:39.950Z,1510167819.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:39.966Z,1510167819.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:40.348Z,1510167820.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:40.389Z,1510167820.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:40.761Z,1510167820.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:40.809Z,1510167820.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:41.157Z,1510167821.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:41.243Z,1510167821.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:41.562Z,1510167821.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:41.606Z,1510167821.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:41.959Z,1510167821.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:42.039Z,1510167822.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:42.345Z,1510167822.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:42.364Z,1510167822.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:42.748Z,1510167822.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:42.765Z,1510167822.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:43.160Z,1510167823.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:43.284Z,1510167823.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:43.555Z,1510167823.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:43.597Z,1510167823.597 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:43.597Z,1510167823.597 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 113
2017-11-08T19:03:43.597Z,1510167823.597 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T19:03:43.599Z,1510167823.599 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:43.599Z,1510167823.599 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 113
2017-11-08T19:03:43.599Z,1510167823.599 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T19:03:43.605Z,1510167823.605 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:43.605Z,1510167823.605 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 113
2017-11-08T19:03:43.605Z,1510167823.605 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T19:03:43.686Z,1510167823.686 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T19:03:43.686Z,1510167823.686 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T19:03:43.686Z,1510167823.686 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T19:03:43.959Z,1510167823.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:44.083Z,1510167824.083 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T19:03:44.083Z,1510167824.083 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 113
2017-11-08T19:03:44.083Z,1510167824.083 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T19:03:44.083Z,1510167824.083 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 113
2017-11-08T19:03:44.084Z,1510167824.084 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T19:03:44.084Z,1510167824.084 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 113
2017-11-08T19:03:44.368Z,1510167824.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:44.419Z,1510167824.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T19:03:44.420Z,1510167824.420 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:03:44.420Z,1510167824.420 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:03:44.421Z,1510167824.421 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T19:03:44.421Z,1510167824.421 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:03:44.421Z,1510167824.421 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:03:44.422Z,1510167824.422 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T19:03:44.422Z,1510167824.422 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:03:44.422Z,1510167824.422 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:03:44.760Z,1510167824.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:44.780Z,1510167824.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T19:03:44.781Z,1510167824.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:45.150Z,1510167825.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:45.170Z,1510167825.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T19:03:45.171Z,1510167825.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:45.554Z,1510167825.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:45.570Z,1510167825.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T19:03:45.571Z,1510167825.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:45.950Z,1510167825.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:45.966Z,1510167825.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T19:03:45.967Z,1510167825.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:46.357Z,1510167826.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:46.374Z,1510167826.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T19:03:46.375Z,1510167826.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:46.750Z,1510167826.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:46.775Z,1510167826.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T19:03:46.775Z,1510167826.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:47.159Z,1510167827.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:47.175Z,1510167827.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T19:03:47.176Z,1510167827.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:47.563Z,1510167827.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:47.584Z,1510167827.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T19:03:47.587Z,1510167827.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:47.964Z,1510167827.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:47.983Z,1510167827.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T19:03:47.984Z,1510167827.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:48.339Z,1510167828.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:48.368Z,1510167828.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T19:03:48.369Z,1510167828.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:48.747Z,1510167828.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:48.778Z,1510167828.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T19:03:48.779Z,1510167828.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:49.140Z,1510167829.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:49.171Z,1510167829.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T19:03:49.171Z,1510167829.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:49.539Z,1510167829.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:49.565Z,1510167829.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T19:03:49.566Z,1510167829.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:49.964Z,1510167829.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:49.983Z,1510167829.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T19:03:49.984Z,1510167829.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:50.363Z,1510167830.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:50.388Z,1510167830.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T19:03:50.389Z,1510167830.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:50.760Z,1510167830.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:50.777Z,1510167830.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T19:03:50.778Z,1510167830.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:51.144Z,1510167831.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:51.169Z,1510167831.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T19:03:51.170Z,1510167831.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:51.539Z,1510167831.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:51.567Z,1510167831.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T19:03:51.568Z,1510167831.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:51.943Z,1510167831.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:51.968Z,1510167831.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T19:03:51.969Z,1510167831.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:52.340Z,1510167832.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:52.368Z,1510167832.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T19:03:52.373Z,1510167832.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:52.739Z,1510167832.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:52.775Z,1510167832.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T19:03:52.776Z,1510167832.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:53.165Z,1510167833.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:53.184Z,1510167833.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T19:03:53.185Z,1510167833.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:53.565Z,1510167833.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:53.617Z,1510167833.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T19:03:53.618Z,1510167833.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:53.964Z,1510167833.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:53.980Z,1510167833.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T19:03:53.981Z,1510167833.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:54.341Z,1510167834.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:54.374Z,1510167834.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T19:03:54.376Z,1510167834.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:54.743Z,1510167834.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:54.778Z,1510167834.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T19:03:54.779Z,1510167834.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:55.144Z,1510167835.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:55.178Z,1510167835.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T19:03:55.179Z,1510167835.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:55.543Z,1510167835.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:55.646Z,1510167835.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-11-08T19:03:55.647Z,1510167835.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:55.954Z,1510167835.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:55.987Z,1510167835.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T19:03:55.988Z,1510167835.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:56.357Z,1510167836.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:56.400Z,1510167836.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T19:03:56.401Z,1510167836.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:56.762Z,1510167836.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:56.787Z,1510167836.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T19:03:56.787Z,1510167836.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:57.144Z,1510167837.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:57.197Z,1510167837.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T19:03:57.198Z,1510167837.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:57.543Z,1510167837.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:57.559Z,1510167837.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T19:03:57.560Z,1510167837.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:57.942Z,1510167837.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:57.959Z,1510167837.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T19:03:57.960Z,1510167837.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:58.347Z,1510167838.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:58.367Z,1510167838.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T19:03:58.368Z,1510167838.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:58.746Z,1510167838.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:58.761Z,1510167838.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T19:03:58.762Z,1510167838.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:59.154Z,1510167839.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:59.170Z,1510167839.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T19:03:59.171Z,1510167839.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:59.557Z,1510167839.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:59.593Z,1510167839.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T19:03:59.594Z,1510167839.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:03:59.956Z,1510167839.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:03:59.972Z,1510167839.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T19:03:59.973Z,1510167839.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:00.357Z,1510167840.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:00.374Z,1510167840.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T19:04:00.375Z,1510167840.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:00.750Z,1510167840.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:00.794Z,1510167840.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T19:04:00.795Z,1510167840.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:01.162Z,1510167841.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:01.183Z,1510167841.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T19:04:01.184Z,1510167841.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:01.546Z,1510167841.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:01.579Z,1510167841.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T19:04:01.580Z,1510167841.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:01.954Z,1510167841.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:01.975Z,1510167841.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T19:04:01.977Z,1510167841.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:02.357Z,1510167842.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:02.373Z,1510167842.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T19:04:02.375Z,1510167842.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:02.755Z,1510167842.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:02.777Z,1510167842.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T19:04:02.778Z,1510167842.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:03.162Z,1510167843.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:03.215Z,1510167843.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T19:04:03.216Z,1510167843.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:03.552Z,1510167843.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:03.575Z,1510167843.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-08T19:04:03.576Z,1510167843.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:03.946Z,1510167843.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:03.967Z,1510167843.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:04.347Z,1510167844.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:04.373Z,1510167844.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:04.752Z,1510167844.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:04.768Z,1510167844.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:05.158Z,1510167845.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:05.178Z,1510167845.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:05.564Z,1510167845.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:05.619Z,1510167845.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:05.964Z,1510167845.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:05.983Z,1510167845.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:06.349Z,1510167846.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:06.383Z,1510167846.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:06.753Z,1510167846.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:06.769Z,1510167846.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:07.151Z,1510167847.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:07.168Z,1510167847.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:07.549Z,1510167847.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:07.575Z,1510167847.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:07.959Z,1510167847.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:07.975Z,1510167847.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:08.366Z,1510167848.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:08.382Z,1510167848.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:08.763Z,1510167848.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:08.786Z,1510167848.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:09.149Z,1510167849.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:09.169Z,1510167849.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:09.556Z,1510167849.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:09.572Z,1510167849.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:09.943Z,1510167849.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:09.976Z,1510167849.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:10.344Z,1510167850.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:10.370Z,1510167850.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:10.743Z,1510167850.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:10.773Z,1510167850.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:11.155Z,1510167851.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:11.181Z,1510167851.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:11.564Z,1510167851.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:11.581Z,1510167851.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:11.963Z,1510167851.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:11.984Z,1510167851.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:12.341Z,1510167852.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:12.378Z,1510167852.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:12.745Z,1510167852.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:12.783Z,1510167852.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:13.148Z,1510167853.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:13.174Z,1510167853.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:13.548Z,1510167853.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:13.584Z,1510167853.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:13.960Z,1510167853.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:13.980Z,1510167853.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:14.372Z,1510167854.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:14.398Z,1510167854.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:14.754Z,1510167854.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:14.791Z,1510167854.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:15.147Z,1510167855.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:15.194Z,1510167855.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:15.543Z,1510167855.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:15.574Z,1510167855.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:15.943Z,1510167855.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:15.960Z,1510167855.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:16.344Z,1510167856.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:16.393Z,1510167856.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:16.753Z,1510167856.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:16.789Z,1510167856.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:17.168Z,1510167857.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:17.203Z,1510167857.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:17.563Z,1510167857.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:17.663Z,1510167857.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:17.957Z,1510167857.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:17.974Z,1510167857.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:18.352Z,1510167858.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:18.369Z,1510167858.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:18.749Z,1510167858.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:18.803Z,1510167858.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:19.153Z,1510167859.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:19.169Z,1510167859.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:19.553Z,1510167859.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:19.634Z,1510167859.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:19.960Z,1510167859.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:19.980Z,1510167859.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:24.574Z,1510167864.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:24.590Z,1510167864.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:24.739Z,1510167864.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:24.783Z,1510167864.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:25.129Z,1510167865.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:25.165Z,1510167865.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:25.530Z,1510167865.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:25.569Z,1510167865.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:25.928Z,1510167865.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:25.961Z,1510167865.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:26.329Z,1510167866.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:26.346Z,1510167866.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:26.731Z,1510167866.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:26.748Z,1510167866.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:27.138Z,1510167867.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:27.172Z,1510167867.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:27.550Z,1510167867.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:27.574Z,1510167867.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:27.941Z,1510167867.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:27.987Z,1510167867.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:28.330Z,1510167868.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:28.347Z,1510167868.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:28.730Z,1510167868.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:28.747Z,1510167868.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:29.131Z,1510167869.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:29.148Z,1510167869.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:29.526Z,1510167869.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:29.543Z,1510167869.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:29.920Z,1510167869.920 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T19:04:29.920Z,1510167869.920 [NAL9602] Data Fault, FailCount= 2
2017-11-08T19:04:29.920Z,1510167869.920 [NAL9602](ERROR): Data Fault
2017-11-08T19:04:29.938Z,1510167869.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:29.954Z,1510167869.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:30.057Z,1510167870.057 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T19:04:30.313Z,1510167870.313 [NAL9602](INFO): Powering down
2017-11-08T19:04:30.331Z,1510167870.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:30.351Z,1510167870.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:30.733Z,1510167870.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:30.753Z,1510167870.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:31.131Z,1510167871.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:31.151Z,1510167871.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:31.229Z,1510167871.229 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T19:04:31.229Z,1510167871.229 [NAL9602] No Fault, FailCount= 2
2017-11-08T19:04:31.539Z,1510167871.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:31.555Z,1510167871.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:31.929Z,1510167871.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:31.945Z,1510167871.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:32.331Z,1510167872.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:32.351Z,1510167872.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:32.728Z,1510167872.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:32.752Z,1510167872.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:33.129Z,1510167873.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:33.149Z,1510167873.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:33.533Z,1510167873.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:33.552Z,1510167873.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:33.933Z,1510167873.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:33.955Z,1510167873.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:34.329Z,1510167874.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:34.345Z,1510167874.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:34.735Z,1510167874.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:34.751Z,1510167874.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:35.129Z,1510167875.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:35.145Z,1510167875.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:35.533Z,1510167875.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:35.549Z,1510167875.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:35.930Z,1510167875.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:35.960Z,1510167875.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:36.329Z,1510167876.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:36.351Z,1510167876.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:36.733Z,1510167876.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:36.750Z,1510167876.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:37.133Z,1510167877.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:37.149Z,1510167877.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:37.526Z,1510167877.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:37.548Z,1510167877.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:37.933Z,1510167877.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:37.956Z,1510167877.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:38.323Z,1510167878.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:38.354Z,1510167878.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:38.737Z,1510167878.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:38.756Z,1510167878.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:39.133Z,1510167879.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:39.150Z,1510167879.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:39.534Z,1510167879.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:39.600Z,1510167879.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:39.936Z,1510167879.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:39.973Z,1510167879.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:40.323Z,1510167880.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:40.364Z,1510167880.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:40.727Z,1510167880.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:40.795Z,1510167880.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:41.127Z,1510167881.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:41.143Z,1510167881.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:41.524Z,1510167881.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:41.580Z,1510167881.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:41.932Z,1510167881.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:41.981Z,1510167881.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:42.337Z,1510167882.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:42.357Z,1510167882.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:42.735Z,1510167882.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:42.753Z,1510167882.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:43.135Z,1510167883.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:43.151Z,1510167883.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:43.529Z,1510167883.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:43.545Z,1510167883.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:43.929Z,1510167883.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:43.945Z,1510167883.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:44.325Z,1510167884.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:44.349Z,1510167884.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:44.732Z,1510167884.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:44.748Z,1510167884.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:45.129Z,1510167885.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:45.145Z,1510167885.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:45.530Z,1510167885.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:45.551Z,1510167885.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:45.929Z,1510167885.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:45.945Z,1510167885.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:46.329Z,1510167886.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:46.345Z,1510167886.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:46.727Z,1510167886.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:46.752Z,1510167886.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:47.126Z,1510167887.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:47.150Z,1510167887.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:47.523Z,1510167887.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:47.555Z,1510167887.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:47.926Z,1510167887.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:47.960Z,1510167887.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:48.323Z,1510167888.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:48.338Z,1510167888.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:48.727Z,1510167888.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:48.743Z,1510167888.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:49.127Z,1510167889.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:49.148Z,1510167889.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:49.530Z,1510167889.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:49.546Z,1510167889.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:49.931Z,1510167889.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:49.997Z,1510167889.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:50.331Z,1510167890.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:50.352Z,1510167890.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:50.731Z,1510167890.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:50.795Z,1510167890.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:51.127Z,1510167891.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:51.143Z,1510167891.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:51.530Z,1510167891.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:51.547Z,1510167891.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:51.928Z,1510167891.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:51.944Z,1510167891.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:52.331Z,1510167892.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:52.347Z,1510167892.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:52.733Z,1510167892.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:52.750Z,1510167892.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:53.130Z,1510167893.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:53.146Z,1510167893.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:53.530Z,1510167893.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:53.547Z,1510167893.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:53.933Z,1510167893.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:53.949Z,1510167893.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:54.330Z,1510167894.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:54.346Z,1510167894.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:54.733Z,1510167894.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:54.749Z,1510167894.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:55.133Z,1510167895.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:55.149Z,1510167895.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:55.529Z,1510167895.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:55.545Z,1510167895.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:55.934Z,1510167895.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:55.950Z,1510167895.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:56.334Z,1510167896.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:56.352Z,1510167896.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:56.729Z,1510167896.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:56.748Z,1510167896.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:57.132Z,1510167897.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:57.150Z,1510167897.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:57.532Z,1510167897.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:57.548Z,1510167897.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:57.933Z,1510167897.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:57.949Z,1510167897.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:58.333Z,1510167898.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:58.350Z,1510167898.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:58.729Z,1510167898.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:58.751Z,1510167898.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:59.129Z,1510167899.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:59.148Z,1510167899.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:59.530Z,1510167899.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:59.552Z,1510167899.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:04:59.933Z,1510167899.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:04:59.950Z,1510167899.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:00.331Z,1510167900.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:00.362Z,1510167900.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:00.706Z,1510167900.706 [NAL9602](INFO): Powering up NAL9602
2017-11-08T19:05:00.737Z,1510167900.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:00.755Z,1510167900.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:01.133Z,1510167901.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:01.149Z,1510167901.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:01.533Z,1510167901.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:01.556Z,1510167901.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:01.937Z,1510167901.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:02.003Z,1510167902.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:02.344Z,1510167902.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:02.389Z,1510167902.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:02.734Z,1510167902.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:02.750Z,1510167902.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:03.123Z,1510167903.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:03.153Z,1510167903.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:03.536Z,1510167903.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:03.593Z,1510167903.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:03.943Z,1510167903.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:03.959Z,1510167903.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:04.324Z,1510167904.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:04.393Z,1510167904.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:04.727Z,1510167904.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:04.756Z,1510167904.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:05.136Z,1510167905.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:05.165Z,1510167905.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:05.525Z,1510167905.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:05.554Z,1510167905.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:05.965Z,1510167905.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:06.019Z,1510167906.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:06.325Z,1510167906.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:06.410Z,1510167906.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:06.736Z,1510167906.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:06.760Z,1510167906.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:07.128Z,1510167907.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:07.203Z,1510167907.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:07.524Z,1510167907.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:07.575Z,1510167907.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:07.924Z,1510167907.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:07.967Z,1510167907.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:08.328Z,1510167908.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:08.414Z,1510167908.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:08.727Z,1510167908.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:08.761Z,1510167908.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:09.123Z,1510167909.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:09.147Z,1510167909.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:09.526Z,1510167909.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:09.564Z,1510167909.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:09.927Z,1510167909.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:09.973Z,1510167909.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:10.324Z,1510167910.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:10.357Z,1510167910.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:10.723Z,1510167910.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:10.743Z,1510167910.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:11.127Z,1510167911.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:11.143Z,1510167911.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:11.533Z,1510167911.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:11.558Z,1510167911.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:11.914Z,1510167911.914 [NAL9602](INFO): NAL9602 initialized
2017-11-08T19:05:11.931Z,1510167911.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:11.948Z,1510167911.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:12.330Z,1510167912.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:12.346Z,1510167912.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:12.741Z,1510167912.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:12.788Z,1510167912.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:13.145Z,1510167913.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:13.178Z,1510167913.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:13.541Z,1510167913.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:13.563Z,1510167913.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:13.935Z,1510167913.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:13.956Z,1510167913.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:14.332Z,1510167914.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:14.348Z,1510167914.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:14.732Z,1510167914.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:14.749Z,1510167914.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:15.130Z,1510167915.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:15.147Z,1510167915.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:15.544Z,1510167915.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:15.561Z,1510167915.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:15.942Z,1510167915.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:15.958Z,1510167915.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:16.339Z,1510167916.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:16.355Z,1510167916.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:16.733Z,1510167916.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:16.749Z,1510167916.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:17.133Z,1510167917.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:17.150Z,1510167917.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:17.534Z,1510167917.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:17.551Z,1510167917.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:17.931Z,1510167917.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:17.952Z,1510167917.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:18.334Z,1510167918.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:18.366Z,1510167918.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:18.745Z,1510167918.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:18.761Z,1510167918.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:19.147Z,1510167919.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:19.163Z,1510167919.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:19.528Z,1510167919.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:19.565Z,1510167919.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:19.931Z,1510167919.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:19.957Z,1510167919.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:20.347Z,1510167920.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:20.368Z,1510167920.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:20.747Z,1510167920.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:20.764Z,1510167920.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:21.148Z,1510167921.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:21.167Z,1510167921.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:21.528Z,1510167921.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:21.558Z,1510167921.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:21.927Z,1510167921.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:21.958Z,1510167921.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:22.348Z,1510167922.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:22.365Z,1510167922.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:22.748Z,1510167922.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:22.766Z,1510167922.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:23.148Z,1510167923.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:23.176Z,1510167923.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:23.533Z,1510167923.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:23.560Z,1510167923.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:26.650Z,1510167926.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:26.682Z,1510167926.682 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-08T19:05:26.683Z,1510167926.683 [BPC1] Data Fault, FailCount= 1
2017-11-08T19:05:26.683Z,1510167926.683 [BPC1](ERROR): Data Fault
2017-11-08T19:05:26.720Z,1510167926.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:26.813Z,1510167926.813 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T19:05:26.872Z,1510167926.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:26.897Z,1510167926.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:27.263Z,1510167927.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:27.284Z,1510167927.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:27.663Z,1510167927.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:27.684Z,1510167927.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:27.782Z,1510167927.782 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T19:05:27.782Z,1510167927.782 [BPC1] No Fault, FailCount= 1
2017-11-08T19:05:28.049Z,1510167928.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:28.115Z,1510167928.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:28.447Z,1510167928.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:28.483Z,1510167928.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:28.840Z,1510167928.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:28.865Z,1510167928.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:29.249Z,1510167929.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:29.265Z,1510167929.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:29.663Z,1510167929.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:29.684Z,1510167929.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:30.059Z,1510167930.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:30.075Z,1510167930.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:30.459Z,1510167930.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:30.475Z,1510167930.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:30.850Z,1510167930.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:30.867Z,1510167930.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:31.249Z,1510167931.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:31.272Z,1510167931.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:31.650Z,1510167931.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:31.666Z,1510167931.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:32.047Z,1510167932.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:32.075Z,1510167932.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:32.458Z,1510167932.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:32.478Z,1510167932.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:32.863Z,1510167932.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:32.879Z,1510167932.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:33.264Z,1510167933.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:33.280Z,1510167933.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:33.639Z,1510167933.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:33.670Z,1510167933.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:34.043Z,1510167934.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:34.075Z,1510167934.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:34.443Z,1510167934.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:34.479Z,1510167934.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:34.844Z,1510167934.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:34.869Z,1510167934.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:35.243Z,1510167935.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:35.274Z,1510167935.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:35.663Z,1510167935.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:35.684Z,1510167935.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:36.063Z,1510167936.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:36.079Z,1510167936.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:36.459Z,1510167936.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:36.519Z,1510167936.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:36.843Z,1510167936.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:36.869Z,1510167936.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:37.257Z,1510167937.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:37.273Z,1510167937.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:37.643Z,1510167937.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:37.674Z,1510167937.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:38.043Z,1510167938.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:38.078Z,1510167938.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:38.460Z,1510167938.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:38.476Z,1510167938.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:38.864Z,1510167938.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:38.880Z,1510167938.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:39.264Z,1510167939.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:39.280Z,1510167939.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:39.643Z,1510167939.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:39.669Z,1510167939.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:40.043Z,1510167940.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:40.075Z,1510167940.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:40.455Z,1510167940.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:40.471Z,1510167940.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:40.853Z,1510167940.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:40.869Z,1510167940.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:41.240Z,1510167941.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:41.274Z,1510167941.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:41.664Z,1510167941.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:41.688Z,1510167941.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:42.058Z,1510167942.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:42.088Z,1510167942.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:42.456Z,1510167942.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:42.479Z,1510167942.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:42.843Z,1510167942.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:42.879Z,1510167942.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:43.239Z,1510167943.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:43.266Z,1510167943.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:43.644Z,1510167943.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:43.670Z,1510167943.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:44.043Z,1510167944.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:44.070Z,1510167944.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:44.458Z,1510167944.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:44.484Z,1510167944.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:44.860Z,1510167944.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:44.877Z,1510167944.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:45.262Z,1510167945.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:45.287Z,1510167945.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:45.643Z,1510167945.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:45.675Z,1510167945.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:46.043Z,1510167946.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:46.074Z,1510167946.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:46.447Z,1510167946.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:46.474Z,1510167946.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:46.844Z,1510167946.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:46.875Z,1510167946.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:47.247Z,1510167947.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:47.273Z,1510167947.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:47.665Z,1510167947.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:47.681Z,1510167947.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:48.060Z,1510167948.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:48.084Z,1510167948.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:48.450Z,1510167948.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:48.532Z,1510167948.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:48.844Z,1510167948.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:48.876Z,1510167948.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:49.243Z,1510167949.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:49.260Z,1510167949.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:49.640Z,1510167949.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:49.692Z,1510167949.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:50.044Z,1510167950.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:50.060Z,1510167950.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:50.458Z,1510167950.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:50.512Z,1510167950.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:50.861Z,1510167950.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:50.886Z,1510167950.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:51.258Z,1510167951.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:51.280Z,1510167951.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:51.644Z,1510167951.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:51.660Z,1510167951.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:52.042Z,1510167952.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:52.063Z,1510167952.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:52.446Z,1510167952.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:52.463Z,1510167952.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:52.845Z,1510167952.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:52.861Z,1510167952.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:53.244Z,1510167953.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:53.260Z,1510167953.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:53.662Z,1510167953.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:53.689Z,1510167953.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:54.058Z,1510167954.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:54.087Z,1510167954.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:54.458Z,1510167954.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:54.491Z,1510167954.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:54.846Z,1510167954.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:54.863Z,1510167954.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:55.244Z,1510167955.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:55.260Z,1510167955.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:55.645Z,1510167955.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:55.661Z,1510167955.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:56.046Z,1510167956.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:56.062Z,1510167956.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:56.454Z,1510167956.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:56.470Z,1510167956.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:56.853Z,1510167956.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:56.870Z,1510167956.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:57.262Z,1510167957.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:57.302Z,1510167957.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:57.646Z,1510167957.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:57.662Z,1510167957.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:58.044Z,1510167958.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:58.060Z,1510167958.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:58.446Z,1510167958.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:58.463Z,1510167958.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:58.845Z,1510167958.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:58.900Z,1510167958.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:59.246Z,1510167959.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:59.262Z,1510167959.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:05:59.658Z,1510167959.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:05:59.696Z,1510167959.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:00.057Z,1510167960.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:00.074Z,1510167960.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:00.453Z,1510167960.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:00.475Z,1510167960.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:00.850Z,1510167960.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:00.866Z,1510167960.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:01.245Z,1510167961.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:01.261Z,1510167961.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:01.645Z,1510167961.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:01.662Z,1510167961.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:02.049Z,1510167962.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:02.065Z,1510167962.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:02.454Z,1510167962.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:02.470Z,1510167962.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:02.853Z,1510167962.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:02.869Z,1510167962.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:03.258Z,1510167963.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:03.274Z,1510167963.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:03.645Z,1510167963.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:03.661Z,1510167963.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:04.045Z,1510167964.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:04.061Z,1510167964.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:04.447Z,1510167964.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:04.477Z,1510167964.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:04.843Z,1510167964.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:04.873Z,1510167964.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:05.245Z,1510167965.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:05.261Z,1510167965.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:05.658Z,1510167965.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:05.674Z,1510167965.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:06.058Z,1510167966.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:06.074Z,1510167966.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:06.454Z,1510167966.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:06.476Z,1510167966.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:06.850Z,1510167966.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:06.866Z,1510167966.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:07.249Z,1510167967.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:07.266Z,1510167967.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:07.651Z,1510167967.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:07.668Z,1510167967.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:08.049Z,1510167968.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:08.090Z,1510167968.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:08.461Z,1510167968.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:08.485Z,1510167968.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:08.861Z,1510167968.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:08.890Z,1510167968.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:09.338Z,1510167969.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:09.362Z,1510167969.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:09.653Z,1510167969.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:09.670Z,1510167969.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:10.043Z,1510167970.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:10.068Z,1510167970.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:10.443Z,1510167970.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:10.472Z,1510167970.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:10.840Z,1510167970.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:10.931Z,1510167970.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:11.243Z,1510167971.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:11.274Z,1510167971.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:11.663Z,1510167971.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:11.683Z,1510167971.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:12.060Z,1510167972.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:12.116Z,1510167972.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:12.460Z,1510167972.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:12.477Z,1510167972.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:12.843Z,1510167972.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:12.896Z,1510167972.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:13.239Z,1510167973.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:13.264Z,1510167973.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:13.644Z,1510167973.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:13.676Z,1510167973.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:14.043Z,1510167974.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:14.060Z,1510167974.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:14.456Z,1510167974.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:14.490Z,1510167974.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:14.857Z,1510167974.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:14.908Z,1510167974.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:15.260Z,1510167975.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:15.276Z,1510167975.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:15.651Z,1510167975.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:15.676Z,1510167975.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:16.052Z,1510167976.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:16.081Z,1510167976.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:16.445Z,1510167976.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:16.488Z,1510167976.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:16.844Z,1510167976.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:16.878Z,1510167976.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:17.308Z,1510167977.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:17.328Z,1510167977.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:17.682Z,1510167977.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:17.733Z,1510167977.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:18.057Z,1510167978.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:18.088Z,1510167978.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:18.453Z,1510167978.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:18.486Z,1510167978.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:18.843Z,1510167978.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:18.860Z,1510167978.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:19.246Z,1510167979.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:19.262Z,1510167979.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:19.649Z,1510167979.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:19.691Z,1510167979.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:20.045Z,1510167980.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:20.085Z,1510167980.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:20.462Z,1510167980.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:20.496Z,1510167980.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:23.598Z,1510167983.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:23.652Z,1510167983.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:23.787Z,1510167983.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:23.820Z,1510167983.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:24.167Z,1510167984.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:24.202Z,1510167984.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:24.570Z,1510167984.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:24.597Z,1510167984.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:24.964Z,1510167984.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:25.001Z,1510167985.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:25.378Z,1510167985.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:25.409Z,1510167985.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:25.777Z,1510167985.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:25.804Z,1510167985.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:26.174Z,1510167986.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:26.199Z,1510167986.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:26.570Z,1510167986.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:26.611Z,1510167986.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:26.974Z,1510167986.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:27.011Z,1510167987.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:27.367Z,1510167987.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:27.391Z,1510167987.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:27.767Z,1510167987.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:27.784Z,1510167987.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:28.167Z,1510167988.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:28.183Z,1510167988.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:28.582Z,1510167988.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:28.616Z,1510167988.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:28.978Z,1510167988.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:28.995Z,1510167988.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:29.378Z,1510167989.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:29.394Z,1510167989.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:29.771Z,1510167989.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:29.788Z,1510167989.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:30.170Z,1510167990.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:30.185Z,1510167990.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:30.568Z,1510167990.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:30.585Z,1510167990.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:30.961Z,1510167990.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:30.998Z,1510167990.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:31.386Z,1510167991.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:31.402Z,1510167991.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:31.774Z,1510167991.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:31.810Z,1510167991.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:32.183Z,1510167992.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:32.216Z,1510167992.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:32.569Z,1510167992.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:32.585Z,1510167992.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:32.965Z,1510167992.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:32.982Z,1510167992.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:33.367Z,1510167993.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:33.385Z,1510167993.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:33.771Z,1510167993.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:33.787Z,1510167993.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:34.171Z,1510167994.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:34.189Z,1510167994.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:34.579Z,1510167994.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:34.596Z,1510167994.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:34.979Z,1510167994.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:35.004Z,1510167995.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:35.401Z,1510167995.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:35.492Z,1510167995.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:35.763Z,1510167995.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:35.791Z,1510167995.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:36.165Z,1510167996.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:36.254Z,1510167996.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:36.574Z,1510167996.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:36.627Z,1510167996.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:36.975Z,1510167996.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:36.991Z,1510167996.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:37.375Z,1510167997.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:37.435Z,1510167997.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:37.782Z,1510167997.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:37.806Z,1510167997.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:38.188Z,1510167998.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:38.209Z,1510167998.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:38.564Z,1510167998.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:38.594Z,1510167998.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:38.959Z,1510167998.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:38.988Z,1510167998.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:39.363Z,1510167999.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:39.391Z,1510167999.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:39.780Z,1510167999.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:39.796Z,1510167999.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:40.159Z,1510168000.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:40.187Z,1510168000.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:40.585Z,1510168000.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:40.601Z,1510168000.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:40.981Z,1510168000.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:40.997Z,1510168000.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:41.386Z,1510168001.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:41.426Z,1510168001.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:41.763Z,1510168001.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:41.790Z,1510168001.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:42.163Z,1510168002.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:42.190Z,1510168002.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:42.580Z,1510168002.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:42.596Z,1510168002.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:42.986Z,1510168002.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:43.012Z,1510168003.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:43.381Z,1510168003.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:43.397Z,1510168003.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:43.780Z,1510168003.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:43.817Z,1510168003.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:44.190Z,1510168004.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:44.234Z,1510168004.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:44.572Z,1510168004.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:44.597Z,1510168004.597 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:44.597Z,1510168004.597 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 114
2017-11-08T19:06:44.597Z,1510168004.597 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T19:06:44.599Z,1510168004.599 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:44.599Z,1510168004.599 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 114
2017-11-08T19:06:44.599Z,1510168004.599 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T19:06:44.601Z,1510168004.601 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:44.601Z,1510168004.601 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 114
2017-11-08T19:06:44.601Z,1510168004.601 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T19:06:44.729Z,1510168004.729 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T19:06:44.729Z,1510168004.729 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T19:06:44.729Z,1510168004.729 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T19:06:44.965Z,1510168004.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:45.100Z,1510168005.100 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T19:06:45.100Z,1510168005.100 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 114
2017-11-08T19:06:45.100Z,1510168005.100 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T19:06:45.100Z,1510168005.100 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 114
2017-11-08T19:06:45.101Z,1510168005.101 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T19:06:45.101Z,1510168005.101 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 114
2017-11-08T19:06:45.378Z,1510168005.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:45.427Z,1510168005.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T19:06:45.427Z,1510168005.427 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:06:45.427Z,1510168005.427 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:06:45.428Z,1510168005.428 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T19:06:45.428Z,1510168005.428 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:06:45.433Z,1510168005.433 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:06:45.433Z,1510168005.433 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T19:06:45.434Z,1510168005.434 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:06:45.434Z,1510168005.434 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:06:45.775Z,1510168005.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:45.825Z,1510168005.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T19:06:45.826Z,1510168005.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:46.173Z,1510168006.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:46.198Z,1510168006.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T19:06:46.199Z,1510168006.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:46.585Z,1510168006.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:46.637Z,1510168006.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T19:06:46.638Z,1510168006.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:46.979Z,1510168006.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:46.000Z,1510168007.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T19:06:47.001Z,1510168007.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:47.380Z,1510168007.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:47.395Z,1510168007.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T19:06:47.396Z,1510168007.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:47.770Z,1510168007.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:47.786Z,1510168007.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T19:06:47.787Z,1510168007.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:48.169Z,1510168008.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:48.185Z,1510168008.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T19:06:48.186Z,1510168008.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:48.570Z,1510168008.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:48.586Z,1510168008.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T19:06:48.587Z,1510168008.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:48.974Z,1510168008.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:48.995Z,1510168008.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T19:06:48.996Z,1510168008.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:49.380Z,1510168009.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:49.395Z,1510168009.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T19:06:49.396Z,1510168009.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:49.780Z,1510168009.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:49.796Z,1510168009.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T19:06:49.797Z,1510168009.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:50.189Z,1510168010.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:50.212Z,1510168010.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T19:06:50.213Z,1510168010.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:50.581Z,1510168010.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:50.605Z,1510168010.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T19:06:50.606Z,1510168010.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:50.963Z,1510168010.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:50.999Z,1510168010.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T19:06:50.000Z,1510168011.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:51.363Z,1510168011.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:51.394Z,1510168011.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T19:06:51.395Z,1510168011.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:51.791Z,1510168011.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:51.819Z,1510168011.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T19:06:51.820Z,1510168011.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:52.160Z,1510168012.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:52.186Z,1510168012.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T19:06:52.187Z,1510168012.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:52.586Z,1510168012.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:52.603Z,1510168012.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T19:06:52.604Z,1510168012.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:52.977Z,1510168012.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:53.009Z,1510168013.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T19:06:53.010Z,1510168013.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:53.378Z,1510168013.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:53.409Z,1510168013.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T19:06:53.410Z,1510168013.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:53.766Z,1510168013.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:53.806Z,1510168013.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T19:06:53.807Z,1510168013.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:54.170Z,1510168014.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:54.186Z,1510168014.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T19:06:54.186Z,1510168014.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:54.571Z,1510168014.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:54.587Z,1510168014.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T19:06:54.588Z,1510168014.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:54.970Z,1510168014.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:54.986Z,1510168014.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T19:06:54.987Z,1510168014.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:55.378Z,1510168015.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:55.394Z,1510168015.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T19:06:55.395Z,1510168015.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:55.782Z,1510168015.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:55.800Z,1510168015.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T19:06:55.817Z,1510168015.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:56.181Z,1510168016.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:56.198Z,1510168016.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T19:06:56.199Z,1510168016.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:56.566Z,1510168016.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:56.599Z,1510168016.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T19:06:56.600Z,1510168016.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:56.963Z,1510168016.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:56.999Z,1510168016.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T19:06:56.000Z,1510168017.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:57.363Z,1510168017.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:57.389Z,1510168017.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T19:06:57.390Z,1510168017.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:57.763Z,1510168017.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:57.861Z,1510168017.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-08T19:06:57.862Z,1510168017.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:58.159Z,1510168018.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:58.188Z,1510168018.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T19:06:58.193Z,1510168018.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:58.582Z,1510168018.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:58.642Z,1510168018.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T19:06:58.643Z,1510168018.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:58.985Z,1510168018.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:59.007Z,1510168019.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T19:06:59.008Z,1510168019.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:59.385Z,1510168019.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:59.440Z,1510168019.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T19:06:59.443Z,1510168019.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:06:59.767Z,1510168019.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:06:59.798Z,1510168019.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T19:06:59.799Z,1510168019.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:00.165Z,1510168020.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:00.201Z,1510168020.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T19:07:00.202Z,1510168020.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:00.571Z,1510168020.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:00.603Z,1510168020.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T19:07:00.603Z,1510168020.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:00.963Z,1510168020.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:01.003Z,1510168021.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T19:07:01.004Z,1510168021.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:01.378Z,1510168021.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:01.411Z,1510168021.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T19:07:01.412Z,1510168021.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:01.774Z,1510168021.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:01.800Z,1510168021.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T19:07:01.801Z,1510168021.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:02.186Z,1510168022.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:02.207Z,1510168022.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T19:07:02.208Z,1510168022.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:02.570Z,1510168022.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:02.586Z,1510168022.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T19:07:02.587Z,1510168022.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:02.959Z,1510168022.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:02.991Z,1510168022.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T19:07:02.992Z,1510168022.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:03.368Z,1510168023.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:03.402Z,1510168023.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T19:07:03.403Z,1510168023.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:03.764Z,1510168023.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:03.789Z,1510168023.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T19:07:03.790Z,1510168023.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:04.163Z,1510168024.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:04.190Z,1510168024.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T19:07:04.191Z,1510168024.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:04.580Z,1510168024.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:04.597Z,1510168024.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:04.985Z,1510168024.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:05.016Z,1510168025.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:05.384Z,1510168025.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:05.404Z,1510168025.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:05.790Z,1510168025.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:05.818Z,1510168025.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:06.167Z,1510168026.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:06.193Z,1510168026.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:06.567Z,1510168026.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:06.611Z,1510168026.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:06.968Z,1510168026.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:06.987Z,1510168026.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:07.387Z,1510168027.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:07.440Z,1510168027.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:07.778Z,1510168027.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:07.836Z,1510168027.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:08.178Z,1510168028.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:08.195Z,1510168028.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:08.570Z,1510168028.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:08.586Z,1510168028.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:08.971Z,1510168028.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:08.988Z,1510168028.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:09.375Z,1510168029.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:09.391Z,1510168029.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:09.773Z,1510168029.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:09.792Z,1510168029.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:10.167Z,1510168030.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:10.185Z,1510168030.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:10.578Z,1510168030.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:10.620Z,1510168030.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:10.976Z,1510168030.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:10.996Z,1510168030.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:11.380Z,1510168031.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:11.398Z,1510168031.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:11.773Z,1510168031.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:11.789Z,1510168031.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:12.165Z,1510168032.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:12.183Z,1510168032.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:12.573Z,1510168032.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:12.590Z,1510168032.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:12.966Z,1510168032.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:12.984Z,1510168032.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:13.379Z,1510168033.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:13.403Z,1510168033.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:13.780Z,1510168033.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:13.805Z,1510168033.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:14.179Z,1510168034.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:14.196Z,1510168034.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:14.570Z,1510168034.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:14.586Z,1510168034.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:14.984Z,1510168034.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:15.001Z,1510168035.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:15.376Z,1510168035.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:15.392Z,1510168035.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:15.777Z,1510168035.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:15.799Z,1510168035.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:16.171Z,1510168036.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:16.202Z,1510168036.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:16.587Z,1510168036.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:16.603Z,1510168036.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:16.987Z,1510168036.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:17.007Z,1510168037.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:17.387Z,1510168037.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:17.404Z,1510168037.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:17.764Z,1510168037.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:17.793Z,1510168037.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:18.159Z,1510168038.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:18.188Z,1510168038.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:18.560Z,1510168038.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:18.596Z,1510168038.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:18.969Z,1510168038.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:18.998Z,1510168038.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:19.386Z,1510168039.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:19.412Z,1510168039.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:19.416Z,1510168039.416 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T19:02:19.3Z
2017-11-08T19:07:19.416Z,1510168039.416 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T19:07:19.416Z,1510168039.416 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T19:07:19.781Z,1510168039.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:19.896Z,1510168039.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:20.721Z,1510168040.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:20.766Z,1510168040.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:20.894Z,1510168040.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:20.928Z,1510168040.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:21.300Z,1510168041.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:21.349Z,1510168041.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:21.696Z,1510168041.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:21.737Z,1510168041.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:25.072Z,1510168045.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:25.089Z,1510168045.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:25.215Z,1510168045.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:25.290Z,1510168045.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:25.572Z,1510168045.572 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171108T132236/Courier0084.lzma
2017-11-08T19:07:25.622Z,1510168045.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:25.652Z,1510168045.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:26.013Z,1510168046.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:26.030Z,1510168046.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:26.403Z,1510168046.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:26.419Z,1510168046.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:26.770Z,1510168046.770 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0084.lzma.bak
2017-11-08T19:07:26.770Z,1510168046.770 [DataOverHttps](INFO): SBD MOMSN=5223292
2017-11-08T19:07:26.803Z,1510168046.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:26.839Z,1510168046.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:27.774Z,1510168047.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:27.806Z,1510168047.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:27.954Z,1510168047.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:27.988Z,1510168047.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:28.353Z,1510168048.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:28.376Z,1510168048.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:28.754Z,1510168048.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:28.770Z,1510168048.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:29.135Z,1510168049.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:29.161Z,1510168049.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:32.314Z,1510168052.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:32.331Z,1510168052.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:32.474Z,1510168052.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:32.499Z,1510168052.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:32.900Z,1510168052.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:32.916Z,1510168052.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:33.304Z,1510168053.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:33.357Z,1510168053.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:33.701Z,1510168053.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:33.717Z,1510168053.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:34.084Z,1510168054.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:34.114Z,1510168054.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:37.516Z,1510168057.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:37.533Z,1510168057.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:37.683Z,1510168057.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:37.723Z,1510168057.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:38.064Z,1510168058.064 [DataOverHttps](INFO): Sending 220 bytes from file Logs/20171108T132236/Express0085.lzma
2017-11-08T19:07:38.110Z,1510168058.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:38.184Z,1510168058.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:38.503Z,1510168058.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:38.535Z,1510168058.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:38.899Z,1510168058.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:38.932Z,1510168058.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:39.262Z,1510168059.262 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0085.lzma.bak
2017-11-08T19:07:39.263Z,1510168059.263 [DataOverHttps](INFO): SBD MOMSN=5223294
2017-11-08T19:07:39.310Z,1510168059.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:39.408Z,1510168059.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:41.447Z,1510168061.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:41.468Z,1510168061.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:41.473Z,1510168061.473 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T19:07:41.473Z,1510168061.473 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T19:07:41.473Z,1510168061.473 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T19:07:41.620Z,1510168061.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:41.646Z,1510168061.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:44.846Z,1510168064.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:44.863Z,1510168064.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:45.005Z,1510168065.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:45.076Z,1510168065.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:45.396Z,1510168065.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:45.466Z,1510168065.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:45.787Z,1510168065.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:45.802Z,1510168065.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:46.176Z,1510168066.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:46.202Z,1510168066.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:46.573Z,1510168066.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:46.640Z,1510168066.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:46.986Z,1510168066.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:47.002Z,1510168067.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:47.397Z,1510168067.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:47.455Z,1510168067.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:47.797Z,1510168067.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:47.813Z,1510168067.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:48.198Z,1510168068.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:48.213Z,1510168068.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:48.572Z,1510168068.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:48.606Z,1510168068.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:48.976Z,1510168068.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:49.010Z,1510168069.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:49.372Z,1510168069.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:49.398Z,1510168069.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:49.772Z,1510168069.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:49.807Z,1510168069.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:50.175Z,1510168070.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:50.211Z,1510168070.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:50.596Z,1510168070.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:50.613Z,1510168070.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:50.996Z,1510168070.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:51.023Z,1510168071.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:51.390Z,1510168071.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:51.415Z,1510168071.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:51.772Z,1510168071.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:51.806Z,1510168071.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:52.172Z,1510168072.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:52.218Z,1510168072.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:52.576Z,1510168072.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:52.611Z,1510168072.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:52.976Z,1510168072.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:53.007Z,1510168073.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:53.392Z,1510168073.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:53.409Z,1510168073.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:53.796Z,1510168073.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:53.812Z,1510168073.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:54.197Z,1510168074.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:54.213Z,1510168074.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:54.572Z,1510168074.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:54.611Z,1510168074.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:54.979Z,1510168074.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:55.005Z,1510168075.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:55.376Z,1510168075.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:55.407Z,1510168075.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:55.773Z,1510168075.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:55.820Z,1510168075.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:56.176Z,1510168076.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:56.207Z,1510168076.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:56.597Z,1510168076.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:56.613Z,1510168076.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:56.990Z,1510168076.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:57.012Z,1510168077.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:57.397Z,1510168077.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:57.414Z,1510168077.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:57.776Z,1510168077.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:57.808Z,1510168077.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:58.172Z,1510168078.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:58.200Z,1510168078.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:58.577Z,1510168078.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:58.610Z,1510168078.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:58.976Z,1510168078.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:58.991Z,1510168078.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:59.385Z,1510168079.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:59.419Z,1510168079.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:07:59.801Z,1510168079.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:07:59.818Z,1510168079.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:00.186Z,1510168080.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:00.216Z,1510168080.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:00.577Z,1510168080.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:00.609Z,1510168080.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:00.977Z,1510168080.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:00.993Z,1510168080.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:01.375Z,1510168081.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:01.391Z,1510168081.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:01.782Z,1510168081.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:01.798Z,1510168081.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:02.182Z,1510168082.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:02.217Z,1510168082.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:02.590Z,1510168082.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:02.627Z,1510168082.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:02.994Z,1510168082.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:03.025Z,1510168083.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:03.391Z,1510168083.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:03.423Z,1510168083.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:03.515Z,1510168083.515 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T19:08:03.515Z,1510168083.515 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T19:08:03.776Z,1510168083.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:03.789Z,1510168083.789 [Rowe_600LCM](INFO): Initializing
2017-11-08T19:08:03.789Z,1510168083.789 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T19:08:03.789Z,1510168083.789 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T19:08:03.789Z,1510168083.789 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T19:08:03.789Z,1510168083.789 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T19:08:03.798Z,1510168083.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:03.885Z,1510168083.885 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T19:08:04.182Z,1510168084.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:04.193Z,1510168084.193 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T19:08:04.263Z,1510168084.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:04.381Z,1510168084.381 [Rowe_600LCM](INFO): Powering down
2017-11-08T19:08:04.587Z,1510168084.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:04.606Z,1510168084.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:04.981Z,1510168084.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:05.020Z,1510168085.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:05.395Z,1510168085.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:05.417Z,1510168085.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:05.795Z,1510168085.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:05.816Z,1510168085.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:05.913Z,1510168085.913 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T19:08:05.913Z,1510168085.913 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T19:08:05.997Z,1510168085.997 [Rowe_600LCM](INFO): Initializing
2017-11-08T19:08:05.997Z,1510168085.997 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T19:08:05.997Z,1510168085.997 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T19:08:05.997Z,1510168085.997 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T19:08:05.997Z,1510168085.997 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T19:08:06.193Z,1510168086.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:06.215Z,1510168086.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:06.309Z,1510168086.309 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T19:08:06.401Z,1510168086.401 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T19:08:06.488Z,1510168086.488 [Rowe_600LCM](INFO): Powering down
2017-11-08T19:08:06.583Z,1510168086.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:06.609Z,1510168086.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:06.982Z,1510168086.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:06.000Z,1510168087.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:07.384Z,1510168087.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:07.400Z,1510168087.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:07.783Z,1510168087.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:07.865Z,1510168087.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:07.953Z,1510168087.953 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T19:08:07.953Z,1510168087.953 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T19:08:08.105Z,1510168088.105 [Rowe_600LCM](INFO): Initializing
2017-11-08T19:08:08.105Z,1510168088.105 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T19:08:08.105Z,1510168088.105 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T19:08:08.105Z,1510168088.105 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T19:08:08.106Z,1510168088.106 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T19:08:08.176Z,1510168088.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:08.212Z,1510168088.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:08.297Z,1510168088.297 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T19:08:08.509Z,1510168088.509 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T19:08:08.598Z,1510168088.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:08.653Z,1510168088.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:08.687Z,1510168088.687 [Rowe_600LCM](INFO): Powering down
2017-11-08T19:08:08.996Z,1510168088.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:09.053Z,1510168089.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:09.396Z,1510168089.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:09.413Z,1510168089.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:09.772Z,1510168089.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:09.824Z,1510168089.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:09.897Z,1510168089.897 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T19:08:09.897Z,1510168089.897 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T19:08:10.172Z,1510168090.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:10.201Z,1510168090.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:10.301Z,1510168090.301 [Rowe_600LCM](INFO): Initializing
2017-11-08T19:08:10.301Z,1510168090.301 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T19:08:10.301Z,1510168090.301 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T19:08:10.302Z,1510168090.302 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T19:08:10.302Z,1510168090.302 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T19:08:10.577Z,1510168090.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:10.609Z,1510168090.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:10.701Z,1510168090.701 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T19:08:10.705Z,1510168090.705 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T19:08:10.806Z,1510168090.806 [Rowe_600LCM](INFO): Powering down
2017-11-08T19:08:10.977Z,1510168090.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:11.021Z,1510168091.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:11.386Z,1510168091.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:11.419Z,1510168091.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:11.790Z,1510168091.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:11.816Z,1510168091.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:12.193Z,1510168092.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:12.224Z,1510168092.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:12.303Z,1510168092.303 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T19:08:12.303Z,1510168092.303 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T19:08:12.421Z,1510168092.421 [Rowe_600LCM](INFO): Initializing
2017-11-08T19:08:12.421Z,1510168092.421 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T19:08:12.421Z,1510168092.421 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T19:08:12.421Z,1510168092.421 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T19:08:12.421Z,1510168092.421 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T19:08:12.572Z,1510168092.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:12.589Z,1510168092.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:12.681Z,1510168092.681 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T19:08:12.681Z,1510168092.681 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T19:08:12.825Z,1510168092.825 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T19:08:12.914Z,1510168092.914 [Rowe_600LCM](INFO): Powering down
2017-11-08T19:08:12.981Z,1510168092.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:13.016Z,1510168093.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:13.380Z,1510168093.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:13.396Z,1510168093.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:13.781Z,1510168093.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:13.798Z,1510168093.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:14.179Z,1510168094.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:14.196Z,1510168094.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:14.586Z,1510168094.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:14.626Z,1510168094.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:14.986Z,1510168094.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:15.021Z,1510168095.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:15.395Z,1510168095.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:15.418Z,1510168095.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:15.779Z,1510168095.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:15.794Z,1510168095.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:16.175Z,1510168096.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:16.192Z,1510168096.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:16.580Z,1510168096.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:16.597Z,1510168096.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:16.975Z,1510168096.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:16.990Z,1510168096.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:17.386Z,1510168097.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:17.420Z,1510168097.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:17.790Z,1510168097.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:17.821Z,1510168097.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:18.195Z,1510168098.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:18.248Z,1510168098.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:18.587Z,1510168098.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:18.620Z,1510168098.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:18.976Z,1510168098.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:19.021Z,1510168099.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:19.379Z,1510168099.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:19.395Z,1510168099.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:19.776Z,1510168099.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:19.851Z,1510168099.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:20.180Z,1510168100.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:20.204Z,1510168100.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:20.586Z,1510168100.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:20.602Z,1510168100.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:20.994Z,1510168100.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:21.026Z,1510168101.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:21.386Z,1510168101.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:21.403Z,1510168101.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:21.782Z,1510168101.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:21.798Z,1510168101.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:22.175Z,1510168102.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:22.208Z,1510168102.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:22.587Z,1510168102.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:22.604Z,1510168102.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:22.983Z,1510168102.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:23.015Z,1510168103.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:23.386Z,1510168103.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:23.420Z,1510168103.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:23.789Z,1510168103.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:23.817Z,1510168103.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:24.189Z,1510168104.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:24.217Z,1510168104.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:24.572Z,1510168104.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:24.596Z,1510168104.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:24.980Z,1510168104.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:24.997Z,1510168104.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:25.379Z,1510168105.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:25.399Z,1510168105.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:25.779Z,1510168105.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:25.797Z,1510168105.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:26.179Z,1510168106.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:26.196Z,1510168106.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:26.589Z,1510168106.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:26.621Z,1510168106.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:26.990Z,1510168106.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:27.023Z,1510168107.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:27.390Z,1510168107.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:27.422Z,1510168107.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:27.779Z,1510168107.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:27.800Z,1510168107.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:28.179Z,1510168108.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:28.195Z,1510168108.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:28.579Z,1510168108.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:28.596Z,1510168108.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:28.979Z,1510168108.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:28.999Z,1510168108.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:29.390Z,1510168109.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:29.406Z,1510168109.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:29.790Z,1510168109.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:29.806Z,1510168109.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:30.189Z,1510168110.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:30.278Z,1510168110.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:30.582Z,1510168110.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:30.603Z,1510168110.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:30.979Z,1510168110.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:31.039Z,1510168111.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:31.379Z,1510168111.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:31.412Z,1510168111.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:31.782Z,1510168111.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:31.839Z,1510168111.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:32.183Z,1510168112.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:32.200Z,1510168112.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:32.591Z,1510168112.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:32.611Z,1510168112.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:32.992Z,1510168112.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:33.008Z,1510168113.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:33.388Z,1510168113.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:33.411Z,1510168113.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:33.791Z,1510168113.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:33.809Z,1510168113.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:34.174Z,1510168114.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:34.198Z,1510168114.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:34.581Z,1510168114.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:34.603Z,1510168114.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:34.981Z,1510168114.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:34.997Z,1510168114.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:35.390Z,1510168115.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:35.418Z,1510168115.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:35.796Z,1510168115.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:35.819Z,1510168115.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:36.215Z,1510168116.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:36.261Z,1510168116.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:36.572Z,1510168116.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:36.600Z,1510168116.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:36.975Z,1510168116.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:37.008Z,1510168117.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:37.373Z,1510168117.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:37.389Z,1510168117.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:37.778Z,1510168117.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:37.818Z,1510168117.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:38.176Z,1510168118.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:38.192Z,1510168118.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:38.589Z,1510168118.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:38.627Z,1510168118.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:38.994Z,1510168118.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:39.024Z,1510168119.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:39.387Z,1510168119.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:39.419Z,1510168119.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:39.781Z,1510168119.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:39.796Z,1510168119.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:40.174Z,1510168120.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:40.230Z,1510168120.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:40.579Z,1510168120.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:40.620Z,1510168120.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:40.979Z,1510168120.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:40.996Z,1510168120.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:41.390Z,1510168121.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:41.425Z,1510168121.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:41.793Z,1510168121.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:41.825Z,1510168121.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:42.193Z,1510168122.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:42.225Z,1510168122.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:45.273Z,1510168125.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:45.290Z,1510168125.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:45.399Z,1510168125.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:45.447Z,1510168125.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:45.815Z,1510168125.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:45.836Z,1510168125.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:46.219Z,1510168126.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:46.235Z,1510168126.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:46.616Z,1510168126.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:46.633Z,1510168126.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:46.995Z,1510168126.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:47.023Z,1510168127.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:47.399Z,1510168127.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:47.430Z,1510168127.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:47.800Z,1510168127.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:47.831Z,1510168127.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:48.200Z,1510168128.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:48.231Z,1510168128.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:48.616Z,1510168128.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:48.633Z,1510168128.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:49.023Z,1510168129.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:49.039Z,1510168129.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:49.417Z,1510168129.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:49.433Z,1510168129.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:49.795Z,1510168129.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:49.830Z,1510168129.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:50.199Z,1510168130.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:50.230Z,1510168130.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:50.600Z,1510168130.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:50.631Z,1510168130.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:50.995Z,1510168130.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:51.030Z,1510168131.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:51.416Z,1510168131.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:51.433Z,1510168131.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:51.817Z,1510168131.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:51.834Z,1510168131.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:52.216Z,1510168132.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:52.276Z,1510168132.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:52.599Z,1510168132.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:52.655Z,1510168132.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:52.996Z,1510168132.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:53.012Z,1510168133.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:53.399Z,1510168133.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:53.456Z,1510168133.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:53.796Z,1510168133.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:53.836Z,1510168133.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:54.199Z,1510168134.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:54.248Z,1510168134.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:54.610Z,1510168134.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:54.642Z,1510168134.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:55.013Z,1510168135.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:55.040Z,1510168135.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:55.410Z,1510168135.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:55.442Z,1510168135.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:55.799Z,1510168135.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:55.815Z,1510168135.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:56.199Z,1510168136.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:56.220Z,1510168136.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:56.596Z,1510168136.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:56.617Z,1510168136.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:56.996Z,1510168136.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:57.016Z,1510168137.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:57.406Z,1510168137.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:57.428Z,1510168137.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:57.810Z,1510168137.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:57.840Z,1510168137.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:58.206Z,1510168138.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:58.228Z,1510168138.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:58.595Z,1510168138.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:58.616Z,1510168138.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:58.995Z,1510168138.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:59.016Z,1510168139.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:59.395Z,1510168139.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:59.416Z,1510168139.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:08:59.800Z,1510168139.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:08:59.816Z,1510168139.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:00.196Z,1510168140.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:00.212Z,1510168140.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:00.610Z,1510168140.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:00.644Z,1510168140.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:01.013Z,1510168141.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:01.043Z,1510168141.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:01.414Z,1510168141.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:01.445Z,1510168141.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:01.799Z,1510168141.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:01.820Z,1510168141.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:02.200Z,1510168142.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:02.216Z,1510168142.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:02.600Z,1510168142.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:02.652Z,1510168142.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:02.999Z,1510168142.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:03.020Z,1510168143.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:03.410Z,1510168143.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:03.442Z,1510168143.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:03.813Z,1510168143.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:03.846Z,1510168143.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:04.210Z,1510168144.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:04.226Z,1510168144.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:04.604Z,1510168144.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:04.620Z,1510168144.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:05.002Z,1510168145.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:05.018Z,1510168145.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:05.401Z,1510168145.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:05.424Z,1510168145.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:05.802Z,1510168145.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:05.822Z,1510168145.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:06.205Z,1510168146.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:06.225Z,1510168146.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:06.610Z,1510168146.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:06.632Z,1510168146.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:07.014Z,1510168147.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:07.056Z,1510168147.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:07.414Z,1510168147.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:07.431Z,1510168147.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:07.805Z,1510168147.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:07.821Z,1510168147.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:08.201Z,1510168148.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:08.218Z,1510168148.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:08.603Z,1510168148.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:08.620Z,1510168148.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:09.000Z,1510168149.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:09.017Z,1510168149.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:09.407Z,1510168149.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:09.428Z,1510168149.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:09.809Z,1510168149.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:09.832Z,1510168149.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:10.210Z,1510168150.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:10.226Z,1510168150.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:10.602Z,1510168150.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:10.618Z,1510168150.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:11.002Z,1510168151.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:11.018Z,1510168151.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:11.402Z,1510168151.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:11.418Z,1510168151.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:11.802Z,1510168151.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:11.818Z,1510168151.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:12.203Z,1510168152.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:12.223Z,1510168152.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:12.610Z,1510168152.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:12.626Z,1510168152.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:13.010Z,1510168153.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:13.026Z,1510168153.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:13.409Z,1510168153.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:13.431Z,1510168153.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:13.802Z,1510168153.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:13.818Z,1510168153.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:14.205Z,1510168154.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:14.221Z,1510168154.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:14.603Z,1510168154.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:14.636Z,1510168154.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:15.007Z,1510168155.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:15.068Z,1510168155.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:15.416Z,1510168155.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:15.432Z,1510168155.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:15.817Z,1510168155.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:15.860Z,1510168155.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:16.216Z,1510168156.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:16.233Z,1510168156.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:16.607Z,1510168156.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:16.667Z,1510168156.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:17.008Z,1510168157.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:17.024Z,1510168157.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:17.395Z,1510168157.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:17.431Z,1510168157.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:17.805Z,1510168157.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:17.835Z,1510168157.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:18.196Z,1510168158.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:18.222Z,1510168158.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:18.616Z,1510168158.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:18.640Z,1510168158.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:19.019Z,1510168159.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:19.040Z,1510168159.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:19.419Z,1510168159.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:19.436Z,1510168159.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:19.796Z,1510168159.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:19.831Z,1510168159.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:20.207Z,1510168160.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:20.227Z,1510168160.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:20.596Z,1510168160.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:20.623Z,1510168160.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:21.006Z,1510168161.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:21.027Z,1510168161.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:21.416Z,1510168161.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:21.432Z,1510168161.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:21.818Z,1510168161.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:21.833Z,1510168161.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:22.215Z,1510168162.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:22.239Z,1510168162.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:22.605Z,1510168162.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:22.622Z,1510168162.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:23.006Z,1510168163.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:23.022Z,1510168163.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:23.405Z,1510168163.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:23.428Z,1510168163.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:23.806Z,1510168163.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:23.828Z,1510168163.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:24.195Z,1510168164.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:24.221Z,1510168164.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:24.615Z,1510168164.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:24.639Z,1510168164.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:25.018Z,1510168165.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:25.071Z,1510168165.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:25.416Z,1510168165.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:25.432Z,1510168165.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:25.806Z,1510168165.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:25.822Z,1510168165.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:26.205Z,1510168166.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:26.222Z,1510168166.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:26.607Z,1510168166.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:26.627Z,1510168166.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:27.006Z,1510168167.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:27.028Z,1510168167.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:27.416Z,1510168167.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:27.440Z,1510168167.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:27.819Z,1510168167.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:27.835Z,1510168167.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:28.215Z,1510168168.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:28.232Z,1510168168.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:28.605Z,1510168168.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:28.622Z,1510168168.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:28.995Z,1510168168.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:29.021Z,1510168169.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:29.405Z,1510168169.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:29.428Z,1510168169.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:29.806Z,1510168169.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:29.864Z,1510168169.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:30.199Z,1510168170.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:30.225Z,1510168170.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:30.616Z,1510168170.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:30.632Z,1510168170.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:31.020Z,1510168171.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:31.036Z,1510168171.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:31.416Z,1510168171.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:31.432Z,1510168171.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:31.799Z,1510168171.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:31.832Z,1510168171.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:32.199Z,1510168172.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:32.232Z,1510168172.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:32.596Z,1510168172.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:32.621Z,1510168172.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:32.999Z,1510168172.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:33.031Z,1510168173.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:33.416Z,1510168173.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:33.432Z,1510168173.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:33.816Z,1510168173.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:33.832Z,1510168173.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:34.216Z,1510168174.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:34.232Z,1510168174.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:34.595Z,1510168174.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:34.621Z,1510168174.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:34.999Z,1510168174.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:35.025Z,1510168175.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:35.399Z,1510168175.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:35.432Z,1510168175.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:35.796Z,1510168175.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:35.822Z,1510168175.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:36.199Z,1510168176.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:36.226Z,1510168176.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:36.616Z,1510168176.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:36.633Z,1510168176.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:37.020Z,1510168177.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:37.094Z,1510168177.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:37.417Z,1510168177.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:37.432Z,1510168177.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:37.799Z,1510168177.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:37.828Z,1510168177.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:38.199Z,1510168178.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:38.263Z,1510168178.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:38.596Z,1510168178.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:38.621Z,1510168178.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:38.999Z,1510168178.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:39.062Z,1510168179.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:39.416Z,1510168179.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:39.432Z,1510168179.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:39.816Z,1510168179.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:39.832Z,1510168179.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:40.216Z,1510168180.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:40.232Z,1510168180.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:40.599Z,1510168180.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:40.632Z,1510168180.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:40.995Z,1510168180.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:41.021Z,1510168181.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:41.399Z,1510168181.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:41.431Z,1510168181.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:41.800Z,1510168181.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:41.825Z,1510168181.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:42.199Z,1510168182.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:42.225Z,1510168182.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:45.394Z,1510168185.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:45.419Z,1510168185.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:45.562Z,1510168185.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:45.599Z,1510168185.599 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:45.600Z,1510168185.600 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 115
2017-11-08T19:09:45.600Z,1510168185.600 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T19:09:45.618Z,1510168185.618 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:45.618Z,1510168185.618 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 115
2017-11-08T19:09:45.618Z,1510168185.618 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T19:09:45.620Z,1510168185.620 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:45.620Z,1510168185.620 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 115
2017-11-08T19:09:45.620Z,1510168185.620 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T19:09:45.709Z,1510168185.709 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T19:09:45.709Z,1510168185.709 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T19:09:45.709Z,1510168185.709 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T19:09:45.950Z,1510168185.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:46.060Z,1510168186.060 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T19:09:46.060Z,1510168186.060 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 115
2017-11-08T19:09:46.061Z,1510168186.061 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T19:09:46.061Z,1510168186.061 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 115
2017-11-08T19:09:46.061Z,1510168186.061 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T19:09:46.061Z,1510168186.061 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 115
2017-11-08T19:09:46.336Z,1510168186.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:46.351Z,1510168186.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T19:09:46.351Z,1510168186.351 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:09:46.352Z,1510168186.352 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:09:46.352Z,1510168186.352 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T19:09:46.353Z,1510168186.353 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:09:46.353Z,1510168186.353 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:09:46.353Z,1510168186.353 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T19:09:46.354Z,1510168186.354 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:09:46.354Z,1510168186.354 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:09:46.739Z,1510168186.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:46.759Z,1510168186.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T19:09:46.761Z,1510168186.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:47.138Z,1510168187.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:47.185Z,1510168187.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T19:09:47.186Z,1510168187.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:47.550Z,1510168187.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:47.583Z,1510168187.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T19:09:47.584Z,1510168187.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:47.950Z,1510168187.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:47.966Z,1510168187.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T19:09:47.966Z,1510168187.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:48.345Z,1510168188.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:48.362Z,1510168188.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T19:09:48.363Z,1510168188.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:48.741Z,1510168188.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:48.757Z,1510168188.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T19:09:48.758Z,1510168188.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:49.139Z,1510168189.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:49.159Z,1510168189.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T19:09:49.160Z,1510168189.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:49.539Z,1510168189.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:49.559Z,1510168189.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T19:09:49.560Z,1510168189.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:49.942Z,1510168189.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:49.957Z,1510168189.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T19:09:49.958Z,1510168189.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:50.346Z,1510168190.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:50.362Z,1510168190.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T19:09:50.363Z,1510168190.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:50.747Z,1510168190.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:50.763Z,1510168190.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T19:09:50.763Z,1510168190.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:51.146Z,1510168191.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:51.167Z,1510168191.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T19:09:51.168Z,1510168191.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:51.541Z,1510168191.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:51.557Z,1510168191.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T19:09:51.558Z,1510168191.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:51.938Z,1510168191.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:51.954Z,1510168191.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T19:09:51.955Z,1510168191.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:52.341Z,1510168192.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:52.363Z,1510168192.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T19:09:52.364Z,1510168192.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:52.742Z,1510168192.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:52.758Z,1510168192.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T19:09:52.759Z,1510168192.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:53.138Z,1510168193.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:53.154Z,1510168193.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T19:09:53.154Z,1510168193.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:53.550Z,1510168193.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:53.571Z,1510168193.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T19:09:53.572Z,1510168193.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:53.950Z,1510168193.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:53.967Z,1510168193.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T19:09:53.968Z,1510168193.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:54.351Z,1510168194.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:54.372Z,1510168194.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T19:09:54.374Z,1510168194.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:54.742Z,1510168194.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:54.758Z,1510168194.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T19:09:54.759Z,1510168194.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:55.139Z,1510168195.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:55.171Z,1510168195.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T19:09:55.172Z,1510168195.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:55.532Z,1510168195.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:55.563Z,1510168195.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T19:09:55.564Z,1510168195.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:55.935Z,1510168195.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:55.967Z,1510168195.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T19:09:55.969Z,1510168195.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:56.352Z,1510168196.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:56.372Z,1510168196.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T19:09:56.373Z,1510168196.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:56.757Z,1510168196.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:56.779Z,1510168196.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T19:09:56.780Z,1510168196.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:57.156Z,1510168197.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:57.171Z,1510168197.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T19:09:57.172Z,1510168197.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:57.535Z,1510168197.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:57.570Z,1510168197.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T19:09:57.571Z,1510168197.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:57.931Z,1510168197.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:57.980Z,1510168197.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T19:09:57.981Z,1510168197.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:58.346Z,1510168198.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:58.362Z,1510168198.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T19:09:58.363Z,1510168198.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:58.744Z,1510168198.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:58.761Z,1510168198.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T19:09:58.761Z,1510168198.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:59.132Z,1510168199.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:59.197Z,1510168199.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T19:09:59.198Z,1510168199.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:59.546Z,1510168199.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:59.572Z,1510168199.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T19:09:59.573Z,1510168199.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:09:59.956Z,1510168199.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:09:59.972Z,1510168199.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T19:09:59.973Z,1510168199.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:00.352Z,1510168200.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:00.403Z,1510168200.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T19:10:00.404Z,1510168200.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:00.736Z,1510168200.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:00.767Z,1510168200.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T19:10:00.768Z,1510168200.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:01.135Z,1510168201.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:01.191Z,1510168201.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T19:10:01.192Z,1510168201.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:01.536Z,1510168201.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:01.563Z,1510168201.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T19:10:01.564Z,1510168201.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:01.935Z,1510168201.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:01.960Z,1510168201.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T19:10:01.961Z,1510168201.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:02.351Z,1510168202.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:02.368Z,1510168202.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T19:10:02.369Z,1510168202.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:02.756Z,1510168202.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:02.776Z,1510168202.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T19:10:02.777Z,1510168202.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:03.146Z,1510168203.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:03.181Z,1510168203.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T19:10:03.182Z,1510168203.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:03.536Z,1510168203.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:03.570Z,1510168203.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T19:10:03.571Z,1510168203.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:03.931Z,1510168203.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:03.966Z,1510168203.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T19:10:03.967Z,1510168203.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:04.351Z,1510168204.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:04.372Z,1510168204.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T19:10:04.374Z,1510168204.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:04.760Z,1510168204.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:04.775Z,1510168204.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T19:10:04.777Z,1510168204.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:05.151Z,1510168205.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:05.178Z,1510168205.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T19:10:05.179Z,1510168205.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:05.532Z,1510168205.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:05.566Z,1510168205.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-08T19:10:05.567Z,1510168205.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:05.935Z,1510168205.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:05.973Z,1510168205.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:06.331Z,1510168206.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:06.362Z,1510168206.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:06.732Z,1510168206.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:06.766Z,1510168206.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:07.135Z,1510168207.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:07.168Z,1510168207.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:07.553Z,1510168207.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:07.573Z,1510168207.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:07.957Z,1510168207.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:07.973Z,1510168207.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:08.352Z,1510168208.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:08.368Z,1510168208.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:08.735Z,1510168208.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:08.761Z,1510168208.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:09.131Z,1510168209.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:09.165Z,1510168209.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:09.536Z,1510168209.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:09.609Z,1510168209.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:09.935Z,1510168209.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:09.961Z,1510168209.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:10.356Z,1510168210.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:10.376Z,1510168210.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:10.754Z,1510168210.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:10.787Z,1510168210.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:11.155Z,1510168211.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:11.175Z,1510168211.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:11.536Z,1510168211.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:11.562Z,1510168211.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:11.936Z,1510168211.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:11.961Z,1510168211.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:12.336Z,1510168212.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:12.364Z,1510168212.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:12.736Z,1510168212.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:12.763Z,1510168212.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:13.135Z,1510168213.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:13.161Z,1510168213.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:13.556Z,1510168213.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:13.575Z,1510168213.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:13.957Z,1510168213.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:13.977Z,1510168213.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:14.352Z,1510168214.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:14.376Z,1510168214.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:14.735Z,1510168214.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:14.791Z,1510168214.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:15.131Z,1510168215.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:15.162Z,1510168215.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:15.536Z,1510168215.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:15.572Z,1510168215.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:15.935Z,1510168215.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:15.961Z,1510168215.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:16.351Z,1510168216.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:16.368Z,1510168216.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:16.756Z,1510168216.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:16.774Z,1510168216.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:17.155Z,1510168217.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:17.175Z,1510168217.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:17.535Z,1510168217.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:17.560Z,1510168217.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:17.935Z,1510168217.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:17.961Z,1510168217.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:18.335Z,1510168218.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:18.361Z,1510168218.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:18.732Z,1510168218.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:18.770Z,1510168218.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:19.135Z,1510168219.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:19.168Z,1510168219.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:19.550Z,1510168219.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:19.566Z,1510168219.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:19.950Z,1510168219.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:20.022Z,1510168220.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:20.350Z,1510168220.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:20.374Z,1510168220.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:20.742Z,1510168220.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:20.795Z,1510168220.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:21.141Z,1510168221.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:21.173Z,1510168221.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:21.539Z,1510168221.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:21.607Z,1510168221.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:21.944Z,1510168221.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:21.960Z,1510168221.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:22.355Z,1510168222.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:22.380Z,1510168222.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:22.757Z,1510168222.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:22.778Z,1510168222.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:23.156Z,1510168223.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:23.182Z,1510168223.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:23.531Z,1510168223.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:23.563Z,1510168223.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:23.931Z,1510168223.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:23.960Z,1510168223.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:24.335Z,1510168224.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:24.364Z,1510168224.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:24.736Z,1510168224.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:24.766Z,1510168224.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:25.135Z,1510168225.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:25.174Z,1510168225.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:25.545Z,1510168225.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:25.579Z,1510168225.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:25.956Z,1510168225.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:25.973Z,1510168225.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:26.346Z,1510168226.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:26.380Z,1510168226.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:26.731Z,1510168226.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:26.747Z,1510168226.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:27.131Z,1510168227.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:27.152Z,1510168227.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:27.536Z,1510168227.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:27.581Z,1510168227.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:27.931Z,1510168227.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:27.947Z,1510168227.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:28.342Z,1510168228.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:28.374Z,1510168228.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:28.749Z,1510168228.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:28.779Z,1510168228.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:29.149Z,1510168229.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:29.185Z,1510168229.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:29.533Z,1510168229.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:29.549Z,1510168229.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:29.938Z,1510168229.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:29.996Z,1510168229.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:30.338Z,1510168230.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:30.354Z,1510168230.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:30.739Z,1510168230.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:30.756Z,1510168230.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:31.138Z,1510168231.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:31.155Z,1510168231.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:31.546Z,1510168231.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:31.563Z,1510168231.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:31.946Z,1510168231.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:31.962Z,1510168231.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:32.350Z,1510168232.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:32.366Z,1510168232.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:32.740Z,1510168232.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:32.756Z,1510168232.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:33.134Z,1510168233.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:33.166Z,1510168233.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:33.540Z,1510168233.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:33.562Z,1510168233.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:33.938Z,1510168233.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:33.959Z,1510168233.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:34.343Z,1510168234.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:34.364Z,1510168234.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:34.747Z,1510168234.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:34.771Z,1510168234.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:35.147Z,1510168235.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:35.167Z,1510168235.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:35.534Z,1510168235.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:35.566Z,1510168235.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:35.944Z,1510168235.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:35.960Z,1510168235.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:36.342Z,1510168236.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:36.358Z,1510168236.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:36.736Z,1510168236.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:36.759Z,1510168236.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:37.142Z,1510168237.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:37.159Z,1510168237.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:37.556Z,1510168237.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:37.574Z,1510168237.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:37.952Z,1510168237.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:37.976Z,1510168237.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:38.350Z,1510168238.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:38.371Z,1510168238.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:38.731Z,1510168238.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:38.763Z,1510168238.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:39.141Z,1510168239.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:39.163Z,1510168239.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:39.542Z,1510168239.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:39.559Z,1510168239.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:39.942Z,1510168239.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:39.959Z,1510168239.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:40.354Z,1510168240.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:40.439Z,1510168240.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:40.758Z,1510168240.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:40.783Z,1510168240.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:41.156Z,1510168241.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:41.177Z,1510168241.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:41.535Z,1510168241.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:41.608Z,1510168241.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:41.939Z,1510168241.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:41.972Z,1510168241.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:42.339Z,1510168242.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:42.389Z,1510168242.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:45.456Z,1510168245.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:45.473Z,1510168245.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:45.577Z,1510168245.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:45.620Z,1510168245.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:46.005Z,1510168246.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:46.021Z,1510168246.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:46.403Z,1510168246.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:46.420Z,1510168246.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:46.802Z,1510168246.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:46.824Z,1510168246.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:47.178Z,1510168247.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:47.207Z,1510168247.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:47.579Z,1510168247.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:47.620Z,1510168247.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:47.976Z,1510168247.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:48.015Z,1510168248.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:48.392Z,1510168248.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:48.424Z,1510168248.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:48.788Z,1510168248.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:48.820Z,1510168248.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:49.194Z,1510168249.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:49.225Z,1510168249.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:49.579Z,1510168249.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:49.627Z,1510168249.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:49.979Z,1510168249.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:49.000Z,1510168250.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:50.380Z,1510168250.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:50.435Z,1510168250.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:50.782Z,1510168250.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:50.804Z,1510168250.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:51.179Z,1510168251.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:51.223Z,1510168251.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:51.592Z,1510168251.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:51.625Z,1510168251.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:51.990Z,1510168251.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:52.005Z,1510168252.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:52.384Z,1510168252.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:52.401Z,1510168252.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:52.779Z,1510168252.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:52.828Z,1510168252.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:53.179Z,1510168253.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:53.199Z,1510168253.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:53.582Z,1510168253.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:53.631Z,1510168253.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:53.981Z,1510168253.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:53.998Z,1510168253.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:54.391Z,1510168254.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:54.432Z,1510168254.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:54.788Z,1510168254.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:54.806Z,1510168254.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:55.194Z,1510168255.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:55.231Z,1510168255.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:55.581Z,1510168255.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:55.602Z,1510168255.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:55.978Z,1510168255.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:56.026Z,1510168256.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:56.378Z,1510168256.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:56.398Z,1510168256.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:56.781Z,1510168256.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:56.797Z,1510168256.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:57.181Z,1510168257.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:57.197Z,1510168257.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:57.586Z,1510168257.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:57.627Z,1510168257.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:57.992Z,1510168257.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:57.998Z,1510168257.998 [PNI_TCM](ERROR): CRC does not match. Expected:0x10339 got:0x5104
2017-11-08T19:10:58.032Z,1510168258.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:58.388Z,1510168258.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:58.405Z,1510168258.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:58.781Z,1510168258.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:58.805Z,1510168258.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:59.181Z,1510168259.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:59.217Z,1510168259.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:59.584Z,1510168259.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:10:59.626Z,1510168259.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:10:59.984Z,1510168259.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:00.001Z,1510168260.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:00.396Z,1510168260.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:00.418Z,1510168260.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:00.792Z,1510168260.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:00.812Z,1510168260.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:01.196Z,1510168261.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:01.271Z,1510168261.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:01.577Z,1510168261.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:01.621Z,1510168261.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:01.978Z,1510168261.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:02.010Z,1510168262.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:02.375Z,1510168262.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:02.463Z,1510168262.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:02.776Z,1510168262.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:02.810Z,1510168262.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:03.203Z,1510168263.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:03.260Z,1510168263.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:03.586Z,1510168263.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:03.618Z,1510168263.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:03.995Z,1510168263.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:04.027Z,1510168264.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:04.388Z,1510168264.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:04.421Z,1510168264.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:04.776Z,1510168264.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:04.794Z,1510168264.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:05.181Z,1510168265.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:05.207Z,1510168265.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:05.580Z,1510168265.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:05.623Z,1510168265.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:05.974Z,1510168265.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:05.994Z,1510168265.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:06.387Z,1510168266.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:06.420Z,1510168266.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:06.786Z,1510168266.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:06.824Z,1510168266.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:07.190Z,1510168267.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:07.231Z,1510168267.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:07.578Z,1510168267.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:07.624Z,1510168267.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:07.978Z,1510168267.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:07.985Z,1510168267.985 [PNI_TCM](ERROR): CRC does not match. Expected:0x53141 got:0x17030
2017-11-08T19:11:08.026Z,1510168268.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:08.381Z,1510168268.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:08.397Z,1510168268.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:08.779Z,1510168268.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:08.825Z,1510168268.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:09.176Z,1510168269.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:09.196Z,1510168269.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:09.591Z,1510168269.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:09.608Z,1510168269.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:09.990Z,1510168269.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:10.006Z,1510168270.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:10.387Z,1510168270.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:10.433Z,1510168270.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:10.780Z,1510168270.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:10.790Z,1510168270.790 [PNI_TCM](ERROR): CRC does not match. Expected:0x65027 got:0x1857
2017-11-08T19:11:10.826Z,1510168270.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:11.184Z,1510168271.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:11.200Z,1510168271.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:11.583Z,1510168271.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:11.640Z,1510168271.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:11.981Z,1510168271.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:12.022Z,1510168272.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:12.392Z,1510168272.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:12.426Z,1510168272.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:12.795Z,1510168272.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:12.838Z,1510168272.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:13.186Z,1510168273.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:13.204Z,1510168273.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:13.581Z,1510168273.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:13.629Z,1510168273.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:13.978Z,1510168273.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:13.998Z,1510168273.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:14.382Z,1510168274.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:14.404Z,1510168274.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:14.783Z,1510168274.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:14.804Z,1510168274.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:15.180Z,1510168275.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:15.228Z,1510168275.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:15.588Z,1510168275.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:15.605Z,1510168275.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:15.991Z,1510168275.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:16.008Z,1510168276.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:16.386Z,1510168276.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:16.403Z,1510168276.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:16.783Z,1510168276.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:16.828Z,1510168276.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:17.184Z,1510168277.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:17.193Z,1510168277.193 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-11-08T19:11:17.230Z,1510168277.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:17.584Z,1510168277.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:17.600Z,1510168277.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:17.981Z,1510168277.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:18.040Z,1510168278.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:18.399Z,1510168278.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:18.415Z,1510168278.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:18.794Z,1510168278.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:18.811Z,1510168278.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:19.194Z,1510168279.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:19.224Z,1510168279.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:19.585Z,1510168279.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:19.602Z,1510168279.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:19.972Z,1510168279.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:20.016Z,1510168280.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:20.376Z,1510168280.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:20.406Z,1510168280.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:20.774Z,1510168280.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:20.803Z,1510168280.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:21.175Z,1510168281.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:21.209Z,1510168281.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:21.590Z,1510168281.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:21.617Z,1510168281.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:21.997Z,1510168281.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:22.022Z,1510168282.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:22.391Z,1510168282.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:22.490Z,1510168282.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:22.776Z,1510168282.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:22.806Z,1510168282.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:23.175Z,1510168283.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:23.239Z,1510168283.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:23.571Z,1510168283.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:23.610Z,1510168283.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:23.977Z,1510168283.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:24.024Z,1510168284.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:24.386Z,1510168284.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:24.425Z,1510168284.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:24.786Z,1510168284.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:24.816Z,1510168284.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:25.190Z,1510168285.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:25.211Z,1510168285.211 [PNI_TCM](ERROR): CRC does not match. Expected:0x41292 got:0x6448
2017-11-08T19:11:25.239Z,1510168285.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:25.581Z,1510168285.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:25.621Z,1510168285.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:25.977Z,1510168285.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:25.993Z,1510168285.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:26.376Z,1510168286.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:26.415Z,1510168286.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:26.781Z,1510168286.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:26.800Z,1510168286.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:27.177Z,1510168287.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:27.194Z,1510168287.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:27.594Z,1510168287.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:27.625Z,1510168287.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:27.990Z,1510168287.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:28.031Z,1510168288.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:28.389Z,1510168288.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:28.396Z,1510168288.396 [PNI_TCM](ERROR): CRC does not match. Expected:0x62442 got:0x10
2017-11-08T19:11:28.432Z,1510168288.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:28.780Z,1510168288.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:28.796Z,1510168288.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:29.177Z,1510168289.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:29.194Z,1510168289.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:29.575Z,1510168289.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:29.623Z,1510168289.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:29.979Z,1510168289.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:29.999Z,1510168289.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:30.387Z,1510168290.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:30.404Z,1510168290.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:30.786Z,1510168290.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:30.802Z,1510168290.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:31.191Z,1510168291.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:31.226Z,1510168291.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:31.579Z,1510168291.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:31.622Z,1510168291.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:31.981Z,1510168291.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:31.988Z,1510168291.988 [PNI_TCM](ERROR): CRC does not match. Expected:0x14537 got:0x16829
2017-11-08T19:11:32.027Z,1510168292.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:32.386Z,1510168292.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:32.431Z,1510168292.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:32.778Z,1510168292.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:32.824Z,1510168292.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:33.178Z,1510168293.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:33.203Z,1510168293.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:33.588Z,1510168293.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:33.605Z,1510168293.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:33.988Z,1510168293.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:34.005Z,1510168294.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:34.386Z,1510168294.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:34.423Z,1510168294.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:34.781Z,1510168294.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:34.791Z,1510168294.791 [PNI_TCM](ERROR): CRC does not match. Expected:0x21479 got:0x5157
2017-11-08T19:11:34.831Z,1510168294.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:35.180Z,1510168295.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:35.196Z,1510168295.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:35.576Z,1510168295.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:35.608Z,1510168295.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:35.980Z,1510168295.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:36.011Z,1510168296.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:36.392Z,1510168296.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:36.408Z,1510168296.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:36.791Z,1510168296.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:36.812Z,1510168296.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:37.186Z,1510168297.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:37.203Z,1510168297.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:37.578Z,1510168297.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:37.608Z,1510168297.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:37.981Z,1510168297.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:37.000Z,1510168298.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:38.382Z,1510168298.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:38.403Z,1510168298.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:38.781Z,1510168298.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:38.809Z,1510168298.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:39.182Z,1510168299.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:39.216Z,1510168299.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:39.592Z,1510168299.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:39.609Z,1510168299.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:39.994Z,1510168299.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:40.018Z,1510168300.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:40.391Z,1510168300.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:40.412Z,1510168300.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:40.785Z,1510168300.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:40.820Z,1510168300.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:41.178Z,1510168301.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:41.188Z,1510168301.188 [PNI_TCM](ERROR): CRC does not match. Expected:0x15635 got:0x6463
2017-11-08T19:11:41.215Z,1510168301.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:41.584Z,1510168301.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:41.596Z,1510168301.596 [PNI_TCM](ERROR): CRC does not match. Expected:0x7276 got:0x29191
2017-11-08T19:11:41.637Z,1510168301.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:41.987Z,1510168301.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:42.004Z,1510168302.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:42.392Z,1510168302.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:42.411Z,1510168302.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:42.795Z,1510168302.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:42.863Z,1510168302.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:45.901Z,1510168305.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:45.960Z,1510168305.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:46.066Z,1510168306.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:46.094Z,1510168306.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:46.476Z,1510168306.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:46.508Z,1510168306.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:46.875Z,1510168306.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:46.924Z,1510168306.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:47.295Z,1510168307.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:47.315Z,1510168307.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:47.691Z,1510168307.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:47.748Z,1510168307.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:48.092Z,1510168308.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:48.108Z,1510168308.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:48.467Z,1510168308.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:48.501Z,1510168308.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:48.873Z,1510168308.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:48.901Z,1510168308.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:49.271Z,1510168309.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:49.303Z,1510168309.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:49.688Z,1510168309.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:49.704Z,1510168309.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:50.091Z,1510168310.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:50.112Z,1510168310.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:50.492Z,1510168310.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:50.508Z,1510168310.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:50.869Z,1510168310.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:50.898Z,1510168310.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:51.271Z,1510168311.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:51.305Z,1510168311.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:51.668Z,1510168311.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:51.684Z,1510168311.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:52.071Z,1510168312.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:52.105Z,1510168312.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:52.482Z,1510168312.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:52.511Z,1510168312.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:52.892Z,1510168312.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:52.908Z,1510168312.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:53.291Z,1510168313.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:53.308Z,1510168313.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:53.671Z,1510168313.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:53.704Z,1510168313.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:54.071Z,1510168314.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:54.117Z,1510168314.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:54.467Z,1510168314.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:54.488Z,1510168314.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:54.872Z,1510168314.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:54.889Z,1510168314.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:55.267Z,1510168315.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:55.283Z,1510168315.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:55.678Z,1510168315.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:55.710Z,1510168315.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:56.094Z,1510168316.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:56.158Z,1510168316.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:56.489Z,1510168316.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:56.516Z,1510168316.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:56.876Z,1510168316.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:56.913Z,1510168316.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:57.274Z,1510168317.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:57.291Z,1510168317.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:57.675Z,1510168317.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:57.695Z,1510168317.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:58.077Z,1510168318.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:58.093Z,1510168318.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:58.486Z,1510168318.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:58.502Z,1510168318.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:58.880Z,1510168318.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:58.903Z,1510168318.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:59.288Z,1510168319.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:59.304Z,1510168319.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:11:59.673Z,1510168319.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:11:59.689Z,1510168319.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:00.074Z,1510168320.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:00.090Z,1510168320.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:00.473Z,1510168320.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:00.490Z,1510168320.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:00.876Z,1510168320.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:00.892Z,1510168320.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:01.274Z,1510168321.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:01.289Z,1510168321.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:01.686Z,1510168321.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:01.736Z,1510168321.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:02.086Z,1510168322.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:02.102Z,1510168322.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:02.481Z,1510168322.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:02.497Z,1510168322.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:02.876Z,1510168322.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:02.893Z,1510168322.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:03.277Z,1510168323.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:03.293Z,1510168323.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:03.672Z,1510168323.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:03.700Z,1510168323.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:04.076Z,1510168324.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:04.092Z,1510168324.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:04.482Z,1510168324.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:04.498Z,1510168324.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:04.885Z,1510168324.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:04.907Z,1510168324.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:05.282Z,1510168325.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:05.298Z,1510168325.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:05.677Z,1510168325.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:05.693Z,1510168325.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:06.071Z,1510168326.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:06.079Z,1510168326.079 [BPC1](ERROR): Failed to parse message.
2017-11-08T19:12:06.079Z,1510168326.079 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-08T19:12:06.079Z,1510168326.079 [BPC1] Data Fault, FailCount= 1
2017-11-08T19:12:06.080Z,1510168326.080 [BPC1](ERROR): Data Fault
2017-11-08T19:12:06.101Z,1510168326.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:06.201Z,1510168326.201 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T19:12:06.471Z,1510168326.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:06.494Z,1510168326.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:06.877Z,1510168326.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:06.898Z,1510168326.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:07.278Z,1510168327.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:07.294Z,1510168327.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:07.369Z,1510168327.369 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T19:12:07.369Z,1510168327.369 [BPC1] No Fault, FailCount= 1
2017-11-08T19:12:07.686Z,1510168327.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:07.764Z,1510168327.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:08.086Z,1510168328.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:08.108Z,1510168328.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:08.487Z,1510168328.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:08.503Z,1510168328.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:08.883Z,1510168328.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:08.903Z,1510168328.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:09.275Z,1510168329.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:09.296Z,1510168329.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:09.681Z,1510168329.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:09.697Z,1510168329.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:10.076Z,1510168330.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:10.092Z,1510168330.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:10.488Z,1510168330.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:10.504Z,1510168330.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:10.888Z,1510168330.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:10.904Z,1510168330.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:11.285Z,1510168331.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:11.301Z,1510168331.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:11.678Z,1510168331.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:11.694Z,1510168331.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:12.078Z,1510168332.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:12.095Z,1510168332.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:12.474Z,1510168332.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:12.491Z,1510168332.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:12.878Z,1510168332.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:12.895Z,1510168332.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:13.275Z,1510168333.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:13.291Z,1510168333.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:13.685Z,1510168333.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:13.702Z,1510168333.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:14.087Z,1510168334.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:14.108Z,1510168334.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:14.487Z,1510168334.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:14.503Z,1510168334.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:14.879Z,1510168334.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:14.895Z,1510168334.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:15.276Z,1510168335.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:15.300Z,1510168335.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:15.669Z,1510168335.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:15.695Z,1510168335.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:16.068Z,1510168336.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:16.126Z,1510168336.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:16.488Z,1510168336.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:16.505Z,1510168336.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:16.892Z,1510168336.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:16.911Z,1510168336.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:17.287Z,1510168337.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:17.307Z,1510168337.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:17.675Z,1510168337.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:17.708Z,1510168337.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:18.067Z,1510168338.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:18.094Z,1510168338.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:18.468Z,1510168338.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:18.503Z,1510168338.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:18.872Z,1510168338.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:18.902Z,1510168338.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:19.267Z,1510168339.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:19.293Z,1510168339.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:19.684Z,1510168339.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:19.701Z,1510168339.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:20.091Z,1510168340.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:20.116Z,1510168340.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:20.488Z,1510168340.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:20.504Z,1510168340.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:20.871Z,1510168340.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:20.896Z,1510168340.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:21.271Z,1510168341.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:21.302Z,1510168341.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:21.672Z,1510168341.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:21.697Z,1510168341.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:22.067Z,1510168342.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:22.092Z,1510168342.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:22.486Z,1510168342.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:22.506Z,1510168342.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:22.888Z,1510168342.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:22.911Z,1510168342.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:23.287Z,1510168343.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:23.304Z,1510168343.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:23.671Z,1510168343.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:23.700Z,1510168343.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:24.072Z,1510168344.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:24.097Z,1510168344.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:24.468Z,1510168344.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:24.502Z,1510168344.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:24.872Z,1510168344.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:24.905Z,1510168344.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:25.271Z,1510168345.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:25.297Z,1510168345.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:25.687Z,1510168345.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:25.704Z,1510168345.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:26.091Z,1510168346.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:26.108Z,1510168346.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:26.492Z,1510168346.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:26.516Z,1510168346.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:26.867Z,1510168346.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:26.922Z,1510168346.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:27.271Z,1510168347.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:27.296Z,1510168347.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:27.668Z,1510168347.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:27.702Z,1510168347.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:28.067Z,1510168348.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:28.116Z,1510168348.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:28.488Z,1510168348.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:28.504Z,1510168348.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:28.891Z,1510168348.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:28.941Z,1510168348.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:29.288Z,1510168349.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:29.304Z,1510168349.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:29.671Z,1510168349.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:29.703Z,1510168349.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:30.068Z,1510168350.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:30.102Z,1510168350.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:30.472Z,1510168350.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:30.504Z,1510168350.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:30.871Z,1510168350.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:30.903Z,1510168350.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:31.291Z,1510168351.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:31.307Z,1510168351.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:31.686Z,1510168351.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:31.702Z,1510168351.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:32.087Z,1510168352.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:32.104Z,1510168352.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:32.472Z,1510168352.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:32.498Z,1510168352.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:32.871Z,1510168352.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:32.897Z,1510168352.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:33.292Z,1510168353.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:33.308Z,1510168353.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:33.693Z,1510168353.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:33.709Z,1510168353.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:34.082Z,1510168354.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:34.103Z,1510168354.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:34.472Z,1510168354.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:34.504Z,1510168354.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:34.872Z,1510168354.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:34.898Z,1510168354.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:35.288Z,1510168355.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:35.311Z,1510168355.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:35.691Z,1510168355.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:35.708Z,1510168355.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:36.092Z,1510168356.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:36.108Z,1510168356.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:36.467Z,1510168356.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:36.497Z,1510168356.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:36.872Z,1510168356.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:36.904Z,1510168356.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:37.267Z,1510168357.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:37.316Z,1510168357.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:37.687Z,1510168357.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:37.708Z,1510168357.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:38.091Z,1510168358.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:38.107Z,1510168358.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:38.492Z,1510168358.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:38.508Z,1510168358.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:38.867Z,1510168358.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:38.898Z,1510168358.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:39.271Z,1510168359.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:39.297Z,1510168359.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:39.669Z,1510168359.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:39.703Z,1510168359.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:40.071Z,1510168360.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:40.096Z,1510168360.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:40.488Z,1510168360.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:40.505Z,1510168360.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:40.892Z,1510168360.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:40.909Z,1510168360.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:41.288Z,1510168361.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:41.304Z,1510168361.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:41.671Z,1510168361.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:41.704Z,1510168361.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:41.711Z,1510168361.711 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T19:12:41.711Z,1510168361.711 [Default:CheckIn:C.Wait] Stopped
2017-11-08T19:12:41.711Z,1510168361.711 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T19:12:41.711Z,1510168361.711 [Default:CheckIn:D] Running Loop=1
2017-11-08T19:12:42.076Z,1510168362.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:42.108Z,1510168362.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:42.111Z,1510168362.111 [Default:CheckIn:D] Stopped
2017-11-08T19:12:42.111Z,1510168362.111 [Default:CheckIn:E] Running Loop=1
2017-11-08T19:12:42.476Z,1510168362.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:42.532Z,1510168362.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:42.535Z,1510168362.535 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 346.018848 min 
2017-11-08T19:12:42.535Z,1510168362.535 [Default:CheckIn:E] Stopped
2017-11-08T19:12:42.535Z,1510168362.535 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T19:12:42.535Z,1510168362.535 [Default:CheckIn] Stopped
2017-11-08T19:12:42.536Z,1510168362.536 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T19:12:42.536Z,1510168362.536 [Default:CheckIn](INFO): Running loop #22
2017-11-08T19:12:42.536Z,1510168362.536 [Default:CheckIn] Running Loop=22
2017-11-08T19:12:42.536Z,1510168362.536 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T19:12:42.536Z,1510168362.536 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T19:12:45.566Z,1510168365.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:45.587Z,1510168365.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:45.750Z,1510168365.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:45.767Z,1510168365.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:46.151Z,1510168366.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:46.168Z,1510168366.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:46.541Z,1510168366.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:46.567Z,1510168366.567 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:46.567Z,1510168366.567 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 116
2017-11-08T19:12:46.567Z,1510168366.567 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T19:12:46.569Z,1510168366.569 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:46.570Z,1510168366.570 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 116
2017-11-08T19:12:46.570Z,1510168366.570 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T19:12:46.571Z,1510168366.571 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:46.571Z,1510168366.571 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 116
2017-11-08T19:12:46.571Z,1510168366.571 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T19:12:46.653Z,1510168366.653 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T19:12:46.653Z,1510168366.653 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T19:12:46.653Z,1510168366.653 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T19:12:46.927Z,1510168366.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:47.045Z,1510168367.045 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T19:12:47.045Z,1510168367.045 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 116
2017-11-08T19:12:47.045Z,1510168367.045 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T19:12:47.045Z,1510168367.045 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 116
2017-11-08T19:12:47.046Z,1510168367.046 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T19:12:47.046Z,1510168367.046 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 116
2017-11-08T19:12:47.323Z,1510168367.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:47.342Z,1510168367.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T19:12:47.343Z,1510168367.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:12:47.343Z,1510168367.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:12:47.344Z,1510168367.344 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T19:12:47.344Z,1510168367.344 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:12:47.365Z,1510168367.365 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:12:47.365Z,1510168367.365 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T19:12:47.365Z,1510168367.365 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:12:47.366Z,1510168367.366 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:12:47.732Z,1510168367.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:47.747Z,1510168367.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T19:12:47.748Z,1510168367.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:48.131Z,1510168368.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:48.151Z,1510168368.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T19:12:48.152Z,1510168368.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:48.542Z,1510168368.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:48.558Z,1510168368.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T19:12:48.559Z,1510168368.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:48.937Z,1510168368.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:48.959Z,1510168368.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T19:12:48.960Z,1510168368.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:49.342Z,1510168369.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:49.358Z,1510168369.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T19:12:49.359Z,1510168369.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:49.732Z,1510168369.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:49.798Z,1510168369.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T19:12:49.799Z,1510168369.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:50.131Z,1510168370.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:50.146Z,1510168370.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T19:12:50.147Z,1510168370.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:50.533Z,1510168370.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:50.590Z,1510168370.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T19:12:50.591Z,1510168370.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:50.933Z,1510168370.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:50.949Z,1510168370.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T19:12:50.950Z,1510168370.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:51.344Z,1510168371.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:51.386Z,1510168371.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T19:12:51.387Z,1510168371.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:51.742Z,1510168371.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:51.763Z,1510168371.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T19:12:51.764Z,1510168371.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:52.143Z,1510168372.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:52.163Z,1510168372.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T19:12:52.164Z,1510168372.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:52.536Z,1510168372.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:52.551Z,1510168372.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T19:12:52.552Z,1510168372.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:52.934Z,1510168372.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:52.950Z,1510168372.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T19:12:52.951Z,1510168372.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:53.331Z,1510168373.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:53.355Z,1510168373.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T19:12:53.356Z,1510168373.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:53.738Z,1510168373.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:53.753Z,1510168373.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T19:12:53.754Z,1510168373.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:54.123Z,1510168374.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:54.162Z,1510168374.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T19:12:54.163Z,1510168374.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:54.539Z,1510168374.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:54.559Z,1510168374.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T19:12:54.560Z,1510168374.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:54.946Z,1510168374.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:54.961Z,1510168374.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T19:12:54.962Z,1510168374.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:55.345Z,1510168375.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:55.361Z,1510168375.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T19:12:55.362Z,1510168375.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:55.727Z,1510168375.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:55.762Z,1510168375.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T19:12:55.763Z,1510168375.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:55.845Z,1510168375.845 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T19:12:56.127Z,1510168376.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:56.153Z,1510168376.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T19:12:56.154Z,1510168376.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:56.528Z,1510168376.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:56.554Z,1510168376.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T19:12:56.555Z,1510168376.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:56.927Z,1510168376.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:56.959Z,1510168376.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T19:12:56.964Z,1510168376.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:57.343Z,1510168377.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:57.364Z,1510168377.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T19:12:57.365Z,1510168377.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:57.741Z,1510168377.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:57.763Z,1510168377.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T19:12:57.764Z,1510168377.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:58.144Z,1510168378.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:58.163Z,1510168378.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T19:12:58.164Z,1510168378.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:58.524Z,1510168378.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:58.555Z,1510168378.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T19:12:58.556Z,1510168378.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:58.928Z,1510168378.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:58.953Z,1510168378.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T19:12:58.954Z,1510168378.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:59.345Z,1510168379.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:59.361Z,1510168379.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T19:12:59.362Z,1510168379.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:12:59.743Z,1510168379.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:12:59.791Z,1510168379.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T19:12:59.792Z,1510168379.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:00.149Z,1510168380.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:00.165Z,1510168380.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T19:13:00.166Z,1510168380.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:00.528Z,1510168380.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:00.554Z,1510168380.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T19:13:00.555Z,1510168380.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:00.928Z,1510168380.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:00.963Z,1510168380.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T19:13:00.964Z,1510168380.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:01.332Z,1510168381.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:01.369Z,1510168381.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T19:13:01.370Z,1510168381.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:01.734Z,1510168381.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:01.750Z,1510168381.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T19:13:01.751Z,1510168381.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:02.135Z,1510168382.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:02.185Z,1510168382.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T19:13:02.186Z,1510168382.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:02.541Z,1510168382.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:02.590Z,1510168382.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T19:13:02.591Z,1510168382.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:02.944Z,1510168382.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:02.960Z,1510168382.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T19:13:02.962Z,1510168382.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:03.344Z,1510168383.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:03.359Z,1510168383.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T19:13:03.361Z,1510168383.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:03.723Z,1510168383.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:03.759Z,1510168383.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T19:13:03.760Z,1510168383.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:04.127Z,1510168384.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:04.167Z,1510168384.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T19:13:04.168Z,1510168384.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:04.524Z,1510168384.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:04.539Z,1510168384.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T19:13:04.540Z,1510168384.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:04.931Z,1510168384.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:04.971Z,1510168384.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T19:13:04.972Z,1510168384.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:05.343Z,1510168385.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:05.375Z,1510168385.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T19:13:05.376Z,1510168385.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:05.745Z,1510168385.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:05.774Z,1510168385.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T19:13:05.775Z,1510168385.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:06.138Z,1510168386.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:06.165Z,1510168386.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T19:13:06.166Z,1510168386.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:06.531Z,1510168386.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:06.551Z,1510168386.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-08T19:13:06.552Z,1510168386.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:06.930Z,1510168386.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:06.946Z,1510168386.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:07.345Z,1510168387.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:07.385Z,1510168387.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:07.742Z,1510168387.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:07.758Z,1510168387.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:08.143Z,1510168388.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:08.159Z,1510168388.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:08.531Z,1510168388.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:08.552Z,1510168388.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:08.932Z,1510168388.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:08.948Z,1510168388.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:09.333Z,1510168389.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:09.349Z,1510168389.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:09.733Z,1510168389.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:09.750Z,1510168389.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:10.132Z,1510168390.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:10.148Z,1510168390.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:10.541Z,1510168390.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:10.564Z,1510168390.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:10.942Z,1510168390.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:10.958Z,1510168390.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:11.334Z,1510168391.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:11.356Z,1510168391.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:11.733Z,1510168391.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:11.807Z,1510168391.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:12.135Z,1510168392.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:12.207Z,1510168392.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:12.535Z,1510168392.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:12.552Z,1510168392.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:12.935Z,1510168392.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:12.951Z,1510168392.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:13.343Z,1510168393.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:13.395Z,1510168393.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:13.742Z,1510168393.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:13.764Z,1510168393.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:14.143Z,1510168394.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:14.193Z,1510168394.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:14.527Z,1510168394.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:14.548Z,1510168394.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:14.934Z,1510168394.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:14.955Z,1510168394.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:15.334Z,1510168395.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:15.355Z,1510168395.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:15.724Z,1510168395.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:15.761Z,1510168395.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:16.127Z,1510168396.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:16.160Z,1510168396.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:16.555Z,1510168396.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:16.572Z,1510168396.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:16.958Z,1510168396.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:16.983Z,1510168396.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:17.340Z,1510168397.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:17.376Z,1510168397.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:17.731Z,1510168397.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:17.747Z,1510168397.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:18.124Z,1510168398.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:18.148Z,1510168398.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:18.531Z,1510168398.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:18.552Z,1510168398.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:18.923Z,1510168398.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:18.939Z,1510168398.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:19.338Z,1510168399.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:19.363Z,1510168399.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:19.741Z,1510168399.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:19.772Z,1510168399.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:20.137Z,1510168400.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:20.165Z,1510168400.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:20.528Z,1510168400.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:20.566Z,1510168400.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:20.927Z,1510168400.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:20.964Z,1510168400.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:21.341Z,1510168401.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:21.380Z,1510168401.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:21.737Z,1510168401.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:21.768Z,1510168401.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:22.138Z,1510168402.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:22.162Z,1510168402.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:22.534Z,1510168402.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:22.583Z,1510168402.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:22.931Z,1510168402.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:22.952Z,1510168402.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:23.342Z,1510168403.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:23.358Z,1510168403.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:23.741Z,1510168403.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:23.757Z,1510168403.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:24.138Z,1510168404.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:24.155Z,1510168404.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:24.532Z,1510168404.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:24.552Z,1510168404.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:24.934Z,1510168404.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:24.951Z,1510168404.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:25.338Z,1510168405.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:25.354Z,1510168405.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:25.750Z,1510168405.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:25.778Z,1510168405.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:26.141Z,1510168406.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:26.163Z,1510168406.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:26.529Z,1510168406.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:26.554Z,1510168406.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:26.943Z,1510168406.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:26.960Z,1510168406.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:27.342Z,1510168407.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:27.359Z,1510168407.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:27.737Z,1510168407.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:27.753Z,1510168407.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:28.134Z,1510168408.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:28.153Z,1510168408.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:28.549Z,1510168408.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:28.565Z,1510168408.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:28.952Z,1510168408.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:28.970Z,1510168408.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:29.349Z,1510168409.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:29.366Z,1510168409.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:29.730Z,1510168409.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:29.766Z,1510168409.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:30.128Z,1510168410.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:30.155Z,1510168410.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:30.537Z,1510168410.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:30.578Z,1510168410.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:30.932Z,1510168410.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:30.963Z,1510168410.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:31.338Z,1510168411.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:31.372Z,1510168411.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:31.748Z,1510168411.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:31.765Z,1510168411.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:32.138Z,1510168412.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:32.168Z,1510168412.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:32.528Z,1510168412.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:32.560Z,1510168412.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:32.930Z,1510168412.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:32.992Z,1510168412.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:33.341Z,1510168413.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:33.368Z,1510168413.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:33.764Z,1510168413.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:33.791Z,1510168413.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:34.148Z,1510168414.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:34.207Z,1510168414.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:34.527Z,1510168414.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:34.600Z,1510168414.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:34.931Z,1510168414.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:34.995Z,1510168414.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:35.344Z,1510168415.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:35.378Z,1510168415.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:35.745Z,1510168415.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:35.778Z,1510168415.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:36.146Z,1510168416.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:36.198Z,1510168416.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:36.534Z,1510168416.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:36.551Z,1510168416.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:36.934Z,1510168416.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:36.985Z,1510168416.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:37.347Z,1510168417.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:37.384Z,1510168417.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:37.738Z,1510168417.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:37.787Z,1510168417.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:38.128Z,1510168418.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:38.156Z,1510168418.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:38.538Z,1510168418.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:38.560Z,1510168418.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:38.949Z,1510168418.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:38.973Z,1510168418.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:39.343Z,1510168419.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:39.374Z,1510168419.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:39.726Z,1510168419.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:39.742Z,1510168419.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:40.131Z,1510168420.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:40.148Z,1510168420.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:40.531Z,1510168420.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:40.547Z,1510168420.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:40.930Z,1510168420.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:40.947Z,1510168420.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:41.343Z,1510168421.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:41.382Z,1510168421.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:41.758Z,1510168421.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:41.793Z,1510168421.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:42.142Z,1510168422.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:42.177Z,1510168422.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:42.528Z,1510168422.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:42.563Z,1510168422.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:42.937Z,1510168422.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:42.964Z,1510168422.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:43.348Z,1510168423.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:43.366Z,1510168423.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:43.750Z,1510168423.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:43.767Z,1510168423.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:44.144Z,1510168424.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:44.181Z,1510168424.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:44.542Z,1510168424.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:44.590Z,1510168424.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:44.938Z,1510168424.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:44.987Z,1510168424.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:45.337Z,1510168425.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:45.389Z,1510168425.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:45.728Z,1510168425.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:45.770Z,1510168425.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:46.135Z,1510168426.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:46.167Z,1510168426.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:46.552Z,1510168426.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:46.588Z,1510168426.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:46.944Z,1510168426.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:46.984Z,1510168426.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:47.358Z,1510168427.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:47.393Z,1510168427.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:47.740Z,1510168427.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:47.757Z,1510168427.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:51.891Z,1510168431.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:51.910Z,1510168431.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:52.046Z,1510168432.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:52.063Z,1510168432.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:52.454Z,1510168432.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:52.490Z,1510168432.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:52.862Z,1510168432.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:52.897Z,1510168432.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:53.259Z,1510168433.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:53.300Z,1510168433.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:53.648Z,1510168433.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:53.674Z,1510168433.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:54.031Z,1510168434.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:54.066Z,1510168434.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:54.450Z,1510168434.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:54.487Z,1510168434.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:54.842Z,1510168434.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:54.878Z,1510168434.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:55.242Z,1510168435.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:55.279Z,1510168435.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:55.655Z,1510168435.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:55.688Z,1510168435.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:56.055Z,1510168436.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:56.087Z,1510168436.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:56.448Z,1510168436.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:56.477Z,1510168436.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:56.839Z,1510168436.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:56.855Z,1510168436.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:57.240Z,1510168437.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:57.273Z,1510168437.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:57.640Z,1510168437.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:57.716Z,1510168437.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:58.038Z,1510168438.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:58.055Z,1510168438.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:58.457Z,1510168438.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:58.523Z,1510168438.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:58.854Z,1510168438.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:58.885Z,1510168438.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:59.250Z,1510168439.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:59.304Z,1510168439.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:13:59.639Z,1510168439.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:13:59.655Z,1510168439.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:00.035Z,1510168440.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:00.051Z,1510168440.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:00.438Z,1510168440.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:00.455Z,1510168440.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:00.839Z,1510168440.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:00.855Z,1510168440.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:01.234Z,1510168441.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:01.251Z,1510168441.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:01.652Z,1510168441.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:01.702Z,1510168441.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:02.046Z,1510168442.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:02.061Z,1510168442.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:02.446Z,1510168442.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:02.462Z,1510168442.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:02.837Z,1510168442.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:02.854Z,1510168442.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:03.238Z,1510168443.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:03.259Z,1510168443.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:03.643Z,1510168443.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:03.664Z,1510168443.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:04.039Z,1510168444.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:04.059Z,1510168444.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:04.449Z,1510168444.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:04.466Z,1510168444.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:04.846Z,1510168444.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:04.862Z,1510168444.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:05.250Z,1510168445.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:05.266Z,1510168445.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:05.639Z,1510168445.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:05.655Z,1510168445.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:06.037Z,1510168446.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:06.053Z,1510168446.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:06.438Z,1510168446.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:06.455Z,1510168446.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:06.838Z,1510168446.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:06.855Z,1510168446.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:07.238Z,1510168447.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:07.255Z,1510168447.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:07.654Z,1510168447.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:07.708Z,1510168447.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:08.053Z,1510168448.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:08.092Z,1510168448.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:08.454Z,1510168448.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:08.490Z,1510168448.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:08.840Z,1510168448.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:08.856Z,1510168448.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:09.239Z,1510168449.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:09.255Z,1510168449.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:09.639Z,1510168449.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:09.656Z,1510168449.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:10.039Z,1510168450.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:10.056Z,1510168450.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:10.450Z,1510168450.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:10.466Z,1510168450.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:10.850Z,1510168450.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:10.867Z,1510168450.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:11.246Z,1510168451.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:11.263Z,1510168451.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:11.641Z,1510168451.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:11.658Z,1510168451.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:12.039Z,1510168452.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:12.060Z,1510168452.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:12.441Z,1510168452.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:12.463Z,1510168452.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:12.839Z,1510168452.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:12.856Z,1510168452.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:13.255Z,1510168453.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:13.297Z,1510168453.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:13.652Z,1510168453.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:13.669Z,1510168453.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:14.045Z,1510168454.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:14.061Z,1510168454.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:14.448Z,1510168454.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:14.465Z,1510168454.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:14.845Z,1510168454.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:14.870Z,1510168454.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:15.243Z,1510168455.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:15.260Z,1510168455.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:15.645Z,1510168455.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:15.662Z,1510168455.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:16.050Z,1510168456.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:16.066Z,1510168456.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:16.452Z,1510168456.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:16.475Z,1510168456.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:16.850Z,1510168456.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:16.866Z,1510168456.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:17.247Z,1510168457.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:17.267Z,1510168457.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:17.641Z,1510168457.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:17.657Z,1510168457.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:18.043Z,1510168458.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:18.060Z,1510168458.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:18.441Z,1510168458.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:18.458Z,1510168458.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:18.839Z,1510168458.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:18.859Z,1510168458.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:19.242Z,1510168459.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:19.258Z,1510168459.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:19.654Z,1510168459.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:19.715Z,1510168459.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:20.051Z,1510168460.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:20.123Z,1510168460.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:20.450Z,1510168460.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:20.475Z,1510168460.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:20.845Z,1510168460.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:20.862Z,1510168460.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:21.238Z,1510168461.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:21.299Z,1510168461.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:21.646Z,1510168461.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:21.662Z,1510168461.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:22.039Z,1510168462.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:22.099Z,1510168462.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:22.451Z,1510168462.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:22.471Z,1510168462.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:22.850Z,1510168462.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:22.872Z,1510168462.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:23.250Z,1510168463.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:23.266Z,1510168463.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:23.642Z,1510168463.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:23.658Z,1510168463.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:24.046Z,1510168464.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:24.068Z,1510168464.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:24.443Z,1510168464.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:24.459Z,1510168464.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:24.846Z,1510168464.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:24.862Z,1510168464.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:25.241Z,1510168465.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:25.258Z,1510168465.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:25.655Z,1510168465.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:25.684Z,1510168465.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:26.059Z,1510168466.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:26.123Z,1510168466.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:26.458Z,1510168466.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:26.474Z,1510168466.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:26.841Z,1510168466.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:26.895Z,1510168466.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:27.237Z,1510168467.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:27.287Z,1510168467.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:27.641Z,1510168467.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:27.676Z,1510168467.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:28.038Z,1510168468.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:28.067Z,1510168468.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:28.459Z,1510168468.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:28.476Z,1510168468.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:28.857Z,1510168468.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:28.873Z,1510168468.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:29.256Z,1510168469.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:29.274Z,1510168469.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:29.635Z,1510168469.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:29.680Z,1510168469.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:30.036Z,1510168470.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:30.068Z,1510168470.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:30.445Z,1510168470.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:30.515Z,1510168470.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:30.836Z,1510168470.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:30.876Z,1510168470.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:31.235Z,1510168471.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:31.252Z,1510168471.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:31.646Z,1510168471.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:31.678Z,1510168471.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:32.049Z,1510168472.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:32.084Z,1510168472.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:32.450Z,1510168472.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:32.475Z,1510168472.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:32.843Z,1510168472.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:32.860Z,1510168472.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:33.244Z,1510168473.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:33.262Z,1510168473.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:33.646Z,1510168473.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:33.662Z,1510168473.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:34.044Z,1510168474.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:34.064Z,1510168474.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:34.454Z,1510168474.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:34.470Z,1510168474.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:34.850Z,1510168474.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:34.871Z,1510168474.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:35.251Z,1510168475.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:35.272Z,1510168475.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:35.643Z,1510168475.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:35.659Z,1510168475.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:36.034Z,1510168476.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:36.066Z,1510168476.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:36.444Z,1510168476.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:36.465Z,1510168476.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:36.844Z,1510168476.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:36.861Z,1510168476.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:37.242Z,1510168477.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:37.268Z,1510168477.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:37.651Z,1510168477.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:37.672Z,1510168477.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:38.057Z,1510168478.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:38.080Z,1510168478.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:38.454Z,1510168478.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:38.479Z,1510168478.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:38.839Z,1510168478.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:38.875Z,1510168478.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:39.232Z,1510168479.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:39.263Z,1510168479.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:39.642Z,1510168479.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:39.663Z,1510168479.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:40.039Z,1510168480.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:40.068Z,1510168480.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:40.453Z,1510168480.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:40.470Z,1510168480.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:40.856Z,1510168480.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:40.875Z,1510168480.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:41.251Z,1510168481.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:41.267Z,1510168481.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:41.636Z,1510168481.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:41.662Z,1510168481.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:42.032Z,1510168482.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:42.092Z,1510168482.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:42.446Z,1510168482.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:42.528Z,1510168482.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:42.838Z,1510168482.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:42.868Z,1510168482.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:46.237Z,1510168486.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:46.305Z,1510168486.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:46.434Z,1510168486.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:46.459Z,1510168486.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:46.835Z,1510168486.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:46.902Z,1510168486.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:47.235Z,1510168487.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:47.258Z,1510168487.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:47.614Z,1510168487.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:47.631Z,1510168487.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:48.016Z,1510168488.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:48.032Z,1510168488.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:48.414Z,1510168488.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:48.431Z,1510168488.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:48.819Z,1510168488.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:48.840Z,1510168488.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:49.237Z,1510168489.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:49.268Z,1510168489.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:49.630Z,1510168489.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:49.662Z,1510168489.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:50.029Z,1510168490.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:50.046Z,1510168490.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:50.425Z,1510168490.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:50.447Z,1510168490.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:50.821Z,1510168490.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:50.883Z,1510168490.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:51.224Z,1510168491.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:51.248Z,1510168491.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:51.619Z,1510168491.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:51.634Z,1510168491.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:52.017Z,1510168492.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:52.040Z,1510168492.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:52.422Z,1510168492.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:52.444Z,1510168492.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:52.826Z,1510168492.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:52.841Z,1510168492.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:53.226Z,1510168493.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:53.242Z,1510168493.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:53.620Z,1510168493.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:53.644Z,1510168493.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:54.014Z,1510168494.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:54.030Z,1510168494.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:54.421Z,1510168494.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:54.438Z,1510168494.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:54.822Z,1510168494.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:54.838Z,1510168494.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:55.214Z,1510168495.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:55.265Z,1510168495.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:55.626Z,1510168495.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:55.642Z,1510168495.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:56.029Z,1510168496.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:56.069Z,1510168496.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:56.428Z,1510168496.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:56.444Z,1510168496.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:56.820Z,1510168496.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:56.836Z,1510168496.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:57.215Z,1510168497.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:57.236Z,1510168497.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:57.620Z,1510168497.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:57.636Z,1510168497.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:58.022Z,1510168498.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:58.038Z,1510168498.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:58.423Z,1510168498.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:58.475Z,1510168498.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:58.823Z,1510168498.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:58.844Z,1510168498.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:59.230Z,1510168499.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:59.246Z,1510168499.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:14:59.621Z,1510168499.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:14:59.637Z,1510168499.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:00.018Z,1510168500.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:00.040Z,1510168500.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:00.418Z,1510168500.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:00.434Z,1510168500.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:00.820Z,1510168500.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:00.836Z,1510168500.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:01.224Z,1510168501.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:01.240Z,1510168501.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:01.627Z,1510168501.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:01.648Z,1510168501.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:02.030Z,1510168502.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:02.046Z,1510168502.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:02.445Z,1510168502.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:02.486Z,1510168502.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:02.815Z,1510168502.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:02.838Z,1510168502.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:03.222Z,1510168503.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:03.239Z,1510168503.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:03.620Z,1510168503.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:03.638Z,1510168503.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:04.024Z,1510168504.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:04.042Z,1510168504.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:04.435Z,1510168504.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:04.451Z,1510168504.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:04.830Z,1510168504.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:04.846Z,1510168504.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:05.232Z,1510168505.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:05.248Z,1510168505.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:05.630Z,1510168505.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:05.646Z,1510168505.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:06.011Z,1510168506.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:06.038Z,1510168506.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:06.412Z,1510168506.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:06.439Z,1510168506.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:06.827Z,1510168506.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:06.846Z,1510168506.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:07.230Z,1510168507.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:07.303Z,1510168507.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:07.636Z,1510168507.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:07.707Z,1510168507.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:08.035Z,1510168508.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:08.056Z,1510168508.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:08.431Z,1510168508.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:08.477Z,1510168508.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:08.825Z,1510168508.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:08.845Z,1510168508.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:09.212Z,1510168509.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:09.287Z,1510168509.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:09.609Z,1510168509.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:09.639Z,1510168509.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:10.007Z,1510168510.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:10.042Z,1510168510.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:10.435Z,1510168510.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:10.456Z,1510168510.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:10.833Z,1510168510.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:10.849Z,1510168510.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:11.228Z,1510168511.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:11.251Z,1510168511.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:11.611Z,1510168511.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:11.632Z,1510168511.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:12.020Z,1510168512.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:12.061Z,1510168512.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:12.412Z,1510168512.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:12.434Z,1510168512.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:12.815Z,1510168512.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:12.845Z,1510168512.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:13.219Z,1510168513.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:13.236Z,1510168513.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:13.593Z,1510168513.593 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T19:15:13.593Z,1510168513.593 [NAL9602] Data Fault, FailCount= 3
2017-11-08T19:15:13.593Z,1510168513.593 [NAL9602](ERROR): Data Fault
2017-11-08T19:15:13.618Z,1510168513.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:13.651Z,1510168513.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:13.737Z,1510168513.737 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T19:15:13.998Z,1510168513.998 [NAL9602](INFO): Powering down
2017-11-08T19:15:14.022Z,1510168514.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:14.055Z,1510168514.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:14.417Z,1510168514.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:14.433Z,1510168514.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:14.816Z,1510168514.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:14.833Z,1510168514.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:14.909Z,1510168514.909 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T19:15:14.909Z,1510168514.909 [NAL9602] No Fault, FailCount= 3
2017-11-08T19:15:15.221Z,1510168515.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:15.237Z,1510168515.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:15.611Z,1510168515.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:15.636Z,1510168515.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:16.023Z,1510168516.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:16.040Z,1510168516.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:16.411Z,1510168516.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:16.446Z,1510168516.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:16.820Z,1510168516.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:16.843Z,1510168516.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:17.212Z,1510168517.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:17.251Z,1510168517.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:17.611Z,1510168517.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:17.676Z,1510168517.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:18.028Z,1510168518.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:18.047Z,1510168518.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:18.415Z,1510168518.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:18.443Z,1510168518.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:18.815Z,1510168518.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:18.842Z,1510168518.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:19.207Z,1510168519.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:19.249Z,1510168519.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:19.611Z,1510168519.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:19.643Z,1510168519.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:20.016Z,1510168520.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:20.048Z,1510168520.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:20.415Z,1510168520.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:20.430Z,1510168520.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:20.807Z,1510168520.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:20.823Z,1510168520.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:21.211Z,1510168521.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:21.232Z,1510168521.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:21.615Z,1510168521.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:21.631Z,1510168521.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:22.015Z,1510168522.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:22.031Z,1510168522.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:22.415Z,1510168522.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:22.436Z,1510168522.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:22.815Z,1510168522.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:22.830Z,1510168522.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:23.215Z,1510168523.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:23.231Z,1510168523.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:23.616Z,1510168523.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:23.632Z,1510168523.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:24.012Z,1510168524.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:24.035Z,1510168524.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:24.414Z,1510168524.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:24.431Z,1510168524.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:24.819Z,1510168524.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:24.836Z,1510168524.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:25.222Z,1510168525.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:25.238Z,1510168525.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:25.630Z,1510168525.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:25.664Z,1510168525.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:26.017Z,1510168526.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:26.034Z,1510168526.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:26.418Z,1510168526.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:26.433Z,1510168526.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:26.817Z,1510168526.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:26.834Z,1510168526.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:27.217Z,1510168527.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:27.233Z,1510168527.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:27.613Z,1510168527.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:27.635Z,1510168527.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:28.018Z,1510168528.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:28.034Z,1510168528.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:28.419Z,1510168528.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:28.440Z,1510168528.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:28.812Z,1510168528.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:28.835Z,1510168528.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:29.219Z,1510168529.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:29.277Z,1510168529.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:29.621Z,1510168529.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:29.698Z,1510168529.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:30.016Z,1510168530.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:30.032Z,1510168530.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:30.407Z,1510168530.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:30.466Z,1510168530.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:30.814Z,1510168530.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:30.836Z,1510168530.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:31.219Z,1510168531.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:31.274Z,1510168531.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:31.621Z,1510168531.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:31.637Z,1510168531.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:32.014Z,1510168532.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:32.038Z,1510168532.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:32.407Z,1510168532.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:32.431Z,1510168532.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:32.810Z,1510168532.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:32.842Z,1510168532.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:33.211Z,1510168533.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:33.236Z,1510168533.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:33.610Z,1510168533.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:33.635Z,1510168533.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:34.007Z,1510168534.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:34.042Z,1510168534.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:34.413Z,1510168534.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:34.438Z,1510168534.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:34.814Z,1510168534.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:34.839Z,1510168534.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:35.210Z,1510168535.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:35.237Z,1510168535.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:35.610Z,1510168535.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:35.640Z,1510168535.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:36.015Z,1510168536.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:36.039Z,1510168536.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:36.408Z,1510168536.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:36.442Z,1510168536.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:36.811Z,1510168536.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:36.840Z,1510168536.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:37.211Z,1510168537.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:37.239Z,1510168537.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:37.610Z,1510168537.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:37.642Z,1510168537.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:38.015Z,1510168538.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:38.044Z,1510168538.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:38.407Z,1510168538.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:38.443Z,1510168538.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:38.807Z,1510168538.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:38.831Z,1510168538.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:39.216Z,1510168539.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:39.245Z,1510168539.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:39.614Z,1510168539.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:39.657Z,1510168539.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:40.011Z,1510168540.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:40.045Z,1510168540.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:40.411Z,1510168540.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:40.446Z,1510168540.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:40.815Z,1510168540.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:40.845Z,1510168540.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:41.217Z,1510168541.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:41.244Z,1510168541.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:41.615Z,1510168541.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:41.645Z,1510168541.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:42.007Z,1510168542.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:42.022Z,1510168542.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:42.410Z,1510168542.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:42.434Z,1510168542.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:42.815Z,1510168542.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:42.849Z,1510168542.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:43.215Z,1510168543.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:43.252Z,1510168543.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:46.271Z,1510168546.271 [NAL9602](INFO): Powering up NAL9602
2017-11-08T19:15:46.298Z,1510168546.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:46.315Z,1510168546.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:46.442Z,1510168546.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:46.458Z,1510168546.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:46.827Z,1510168546.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:46.863Z,1510168546.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:47.237Z,1510168547.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:47.253Z,1510168547.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:47.628Z,1510168547.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:47.653Z,1510168547.653 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:47.653Z,1510168547.653 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 117
2017-11-08T19:15:47.654Z,1510168547.654 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T19:15:47.655Z,1510168547.655 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:47.655Z,1510168547.655 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 117
2017-11-08T19:15:47.655Z,1510168547.655 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T19:15:47.657Z,1510168547.657 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:47.657Z,1510168547.657 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 117
2017-11-08T19:15:47.657Z,1510168547.657 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T19:15:47.729Z,1510168547.729 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T19:15:47.729Z,1510168547.729 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T19:15:47.729Z,1510168547.729 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T19:15:48.023Z,1510168548.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:48.129Z,1510168548.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T19:15:48.129Z,1510168548.129 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 117
2017-11-08T19:15:48.129Z,1510168548.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T19:15:48.129Z,1510168548.129 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 117
2017-11-08T19:15:48.130Z,1510168548.130 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T19:15:48.130Z,1510168548.130 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 117
2017-11-08T19:15:48.428Z,1510168548.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:48.467Z,1510168548.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T19:15:48.467Z,1510168548.467 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:15:48.468Z,1510168548.468 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:15:48.468Z,1510168548.468 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T19:15:48.469Z,1510168548.469 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:15:48.469Z,1510168548.469 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:15:48.469Z,1510168548.469 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T19:15:48.470Z,1510168548.470 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:15:48.470Z,1510168548.470 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:15:48.822Z,1510168548.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:48.859Z,1510168548.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T19:15:48.864Z,1510168548.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:49.227Z,1510168549.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:49.268Z,1510168549.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T19:15:49.269Z,1510168549.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:49.627Z,1510168549.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:49.644Z,1510168549.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T19:15:49.661Z,1510168549.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:50.027Z,1510168550.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:50.047Z,1510168550.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T19:15:50.048Z,1510168550.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:50.430Z,1510168550.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:50.446Z,1510168550.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T19:15:50.447Z,1510168550.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:50.831Z,1510168550.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:50.848Z,1510168550.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T19:15:50.849Z,1510168550.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:51.230Z,1510168551.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:51.247Z,1510168551.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T19:15:51.248Z,1510168551.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:51.625Z,1510168551.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:51.702Z,1510168551.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T19:15:51.703Z,1510168551.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:52.032Z,1510168552.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:52.094Z,1510168552.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T19:15:52.095Z,1510168552.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:52.433Z,1510168552.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:52.455Z,1510168552.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T19:15:52.456Z,1510168552.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:52.828Z,1510168552.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:52.881Z,1510168552.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T19:15:52.882Z,1510168552.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:53.236Z,1510168553.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:53.252Z,1510168553.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T19:15:53.253Z,1510168553.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:53.633Z,1510168553.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:53.690Z,1510168553.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T19:15:53.692Z,1510168553.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:54.029Z,1510168554.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:54.045Z,1510168554.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T19:15:54.046Z,1510168554.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:54.429Z,1510168554.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:54.445Z,1510168554.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T19:15:54.446Z,1510168554.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:54.833Z,1510168554.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:54.848Z,1510168554.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T19:15:54.849Z,1510168554.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:55.233Z,1510168555.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:55.248Z,1510168555.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T19:15:55.249Z,1510168555.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:55.629Z,1510168555.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:55.645Z,1510168555.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T19:15:55.646Z,1510168555.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:56.029Z,1510168556.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:56.047Z,1510168556.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T19:15:56.048Z,1510168556.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:56.429Z,1510168556.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:56.445Z,1510168556.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T19:15:56.446Z,1510168556.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:56.839Z,1510168556.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:56.855Z,1510168556.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T19:15:56.856Z,1510168556.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:57.215Z,1510168557.215 [NAL9602](INFO): NAL9602 initialized
2017-11-08T19:15:57.239Z,1510168557.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:57.260Z,1510168557.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T19:15:57.261Z,1510168557.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:57.631Z,1510168557.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:57.657Z,1510168557.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T19:15:57.658Z,1510168557.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:58.043Z,1510168558.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:58.059Z,1510168558.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T19:15:58.061Z,1510168558.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:58.443Z,1510168558.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:58.463Z,1510168558.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T19:15:58.464Z,1510168558.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:58.842Z,1510168558.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:58.858Z,1510168558.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T19:15:58.859Z,1510168558.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:59.237Z,1510168559.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:59.253Z,1510168559.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T19:15:59.254Z,1510168559.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:15:59.631Z,1510168559.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:15:59.652Z,1510168559.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T19:15:59.653Z,1510168559.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:00.033Z,1510168560.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:00.049Z,1510168560.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T19:16:00.050Z,1510168560.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:00.430Z,1510168560.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:00.450Z,1510168560.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T19:16:00.451Z,1510168560.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:00.831Z,1510168560.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:00.861Z,1510168560.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T19:16:00.862Z,1510168560.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:01.242Z,1510168561.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:01.258Z,1510168561.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T19:16:01.259Z,1510168561.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:01.643Z,1510168561.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:01.659Z,1510168561.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T19:16:01.660Z,1510168561.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:02.042Z,1510168562.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:02.095Z,1510168562.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T19:16:02.096Z,1510168562.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:02.437Z,1510168562.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:02.459Z,1510168562.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T19:16:02.460Z,1510168562.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:02.835Z,1510168562.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:02.851Z,1510168562.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T19:16:02.852Z,1510168562.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:03.238Z,1510168563.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:03.255Z,1510168563.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T19:16:03.256Z,1510168563.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:03.634Z,1510168563.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:03.650Z,1510168563.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T19:16:03.650Z,1510168563.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:04.044Z,1510168564.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:04.060Z,1510168564.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T19:16:04.061Z,1510168564.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:04.444Z,1510168564.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:04.459Z,1510168564.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T19:16:04.460Z,1510168564.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:04.843Z,1510168564.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:04.863Z,1510168564.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T19:16:04.864Z,1510168564.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:05.239Z,1510168565.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:05.255Z,1510168565.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T19:16:05.255Z,1510168565.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:05.633Z,1510168565.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:05.650Z,1510168565.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T19:16:05.651Z,1510168565.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:06.033Z,1510168566.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:06.049Z,1510168566.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T19:16:06.050Z,1510168566.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:06.430Z,1510168566.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:06.447Z,1510168566.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T19:16:06.448Z,1510168566.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:06.840Z,1510168566.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:06.857Z,1510168566.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T19:16:06.858Z,1510168566.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:07.244Z,1510168567.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:07.261Z,1510168567.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T19:16:07.262Z,1510168567.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:07.646Z,1510168567.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:07.663Z,1510168567.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:08.050Z,1510168568.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:08.074Z,1510168568.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:08.429Z,1510168568.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:08.500Z,1510168568.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:08.823Z,1510168568.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:08.839Z,1510168568.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:09.232Z,1510168569.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:09.264Z,1510168569.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:09.629Z,1510168569.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:09.645Z,1510168569.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:10.042Z,1510168570.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:10.058Z,1510168570.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:10.442Z,1510168570.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:10.458Z,1510168570.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:10.838Z,1510168570.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:10.859Z,1510168570.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:11.238Z,1510168571.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:11.255Z,1510168571.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:11.627Z,1510168571.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:11.648Z,1510168571.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:12.033Z,1510168572.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:12.050Z,1510168572.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:12.434Z,1510168572.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:12.451Z,1510168572.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:12.833Z,1510168572.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:12.849Z,1510168572.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:13.238Z,1510168573.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:13.260Z,1510168573.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:13.642Z,1510168573.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:13.658Z,1510168573.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:14.042Z,1510168574.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:14.111Z,1510168574.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:14.433Z,1510168574.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:14.449Z,1510168574.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:14.834Z,1510168574.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:14.903Z,1510168574.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:15.234Z,1510168575.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:15.251Z,1510168575.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:15.633Z,1510168575.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:15.649Z,1510168575.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:16.041Z,1510168576.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:16.095Z,1510168576.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:16.442Z,1510168576.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:16.458Z,1510168576.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:16.838Z,1510168576.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:16.895Z,1510168576.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:17.238Z,1510168577.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:17.254Z,1510168577.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:17.638Z,1510168577.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:17.660Z,1510168577.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:18.035Z,1510168578.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:18.051Z,1510168578.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:18.434Z,1510168578.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:18.450Z,1510168578.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:18.833Z,1510168578.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:18.849Z,1510168578.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:19.238Z,1510168579.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:19.260Z,1510168579.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:19.641Z,1510168579.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:19.658Z,1510168579.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:20.042Z,1510168580.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:20.058Z,1510168580.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:20.433Z,1510168580.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:20.449Z,1510168580.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:20.834Z,1510168580.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:20.850Z,1510168580.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:21.237Z,1510168581.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:21.254Z,1510168581.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:21.633Z,1510168581.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:21.649Z,1510168581.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:22.041Z,1510168582.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:22.058Z,1510168582.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:22.442Z,1510168582.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:22.458Z,1510168582.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:22.842Z,1510168582.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:22.864Z,1510168582.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:23.238Z,1510168583.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:23.255Z,1510168583.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:23.631Z,1510168583.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:23.661Z,1510168583.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:24.034Z,1510168584.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:24.050Z,1510168584.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:24.431Z,1510168584.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:24.447Z,1510168584.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:24.834Z,1510168584.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:24.856Z,1510168584.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:25.243Z,1510168585.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:25.295Z,1510168585.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:25.645Z,1510168585.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:25.661Z,1510168585.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:26.042Z,1510168586.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:26.067Z,1510168586.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:26.424Z,1510168586.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:26.458Z,1510168586.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:26.824Z,1510168586.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:26.861Z,1510168586.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:27.239Z,1510168587.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:27.256Z,1510168587.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:27.638Z,1510168587.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:27.654Z,1510168587.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:28.045Z,1510168588.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:28.062Z,1510168588.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:28.449Z,1510168588.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:28.472Z,1510168588.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:28.844Z,1510168588.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:28.861Z,1510168588.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:29.243Z,1510168589.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:29.259Z,1510168589.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:29.627Z,1510168589.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:29.663Z,1510168589.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:30.023Z,1510168590.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:30.056Z,1510168590.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:30.428Z,1510168590.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:30.455Z,1510168590.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:30.827Z,1510168590.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:30.853Z,1510168590.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:31.243Z,1510168591.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:31.260Z,1510168591.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:31.643Z,1510168591.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:31.664Z,1510168591.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:32.048Z,1510168592.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:32.065Z,1510168592.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:32.423Z,1510168592.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:32.455Z,1510168592.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:32.827Z,1510168592.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:32.854Z,1510168592.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:33.238Z,1510168593.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:33.255Z,1510168593.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:33.623Z,1510168593.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:33.654Z,1510168593.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:34.048Z,1510168594.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:34.065Z,1510168594.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:34.447Z,1510168594.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:34.463Z,1510168594.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:34.840Z,1510168594.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:34.856Z,1510168594.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:35.241Z,1510168595.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:35.258Z,1510168595.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:35.627Z,1510168595.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:35.654Z,1510168595.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:36.027Z,1510168596.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:36.059Z,1510168596.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:36.423Z,1510168596.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:36.458Z,1510168596.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:36.827Z,1510168596.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:36.862Z,1510168596.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:37.243Z,1510168597.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:37.339Z,1510168597.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:37.644Z,1510168597.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:37.661Z,1510168597.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:38.047Z,1510168598.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:38.065Z,1510168598.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:38.423Z,1510168598.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:38.468Z,1510168598.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:38.823Z,1510168598.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:38.863Z,1510168598.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:39.232Z,1510168599.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:39.295Z,1510168599.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:39.623Z,1510168599.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:39.653Z,1510168599.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:40.044Z,1510168600.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:40.060Z,1510168600.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:40.448Z,1510168600.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:40.464Z,1510168600.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:40.840Z,1510168600.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:40.856Z,1510168600.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:41.229Z,1510168601.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:41.255Z,1510168601.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:41.627Z,1510168601.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:41.652Z,1510168601.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:42.027Z,1510168602.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:42.052Z,1510168602.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:42.425Z,1510168602.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:42.459Z,1510168602.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:42.828Z,1510168602.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:42.860Z,1510168602.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:43.252Z,1510168603.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:43.267Z,1510168603.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:46.317Z,1510168606.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:46.350Z,1510168606.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:46.498Z,1510168606.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:46.515Z,1510168606.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:46.871Z,1510168606.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:46.913Z,1510168606.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:47.273Z,1510168607.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:47.323Z,1510168607.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:47.672Z,1510168607.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:47.705Z,1510168607.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:48.078Z,1510168608.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:48.109Z,1510168608.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:48.482Z,1510168608.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:48.509Z,1510168608.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:48.886Z,1510168608.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:48.923Z,1510168608.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:49.267Z,1510168609.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:49.287Z,1510168609.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:49.671Z,1510168609.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:49.688Z,1510168609.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:50.072Z,1510168610.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:50.089Z,1510168610.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:50.469Z,1510168610.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:50.486Z,1510168610.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:50.885Z,1510168610.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:50.916Z,1510168610.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:51.289Z,1510168611.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:51.319Z,1510168611.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:51.681Z,1510168611.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:51.713Z,1510168611.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:52.074Z,1510168612.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:52.091Z,1510168612.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:52.471Z,1510168612.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:52.488Z,1510168612.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:52.881Z,1510168612.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:52.921Z,1510168612.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:53.289Z,1510168613.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:53.318Z,1510168613.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:53.686Z,1510168613.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:53.718Z,1510168613.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:54.075Z,1510168614.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:54.091Z,1510168614.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:54.476Z,1510168614.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:54.492Z,1510168614.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:54.886Z,1510168614.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:54.916Z,1510168614.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:55.285Z,1510168615.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:55.317Z,1510168615.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:55.686Z,1510168615.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:55.718Z,1510168615.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:56.075Z,1510168616.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:56.096Z,1510168616.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:56.474Z,1510168616.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:56.490Z,1510168616.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:56.886Z,1510168616.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:56.917Z,1510168616.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:57.288Z,1510168617.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:57.317Z,1510168617.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:57.686Z,1510168617.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:57.716Z,1510168617.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:58.075Z,1510168618.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:58.117Z,1510168618.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:58.477Z,1510168618.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:58.493Z,1510168618.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:58.881Z,1510168618.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:58.916Z,1510168618.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:59.286Z,1510168619.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:59.380Z,1510168619.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:16:59.686Z,1510168619.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:16:59.721Z,1510168619.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:00.083Z,1510168620.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:00.099Z,1510168620.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:00.478Z,1510168620.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:00.527Z,1510168620.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:00.886Z,1510168620.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:00.902Z,1510168620.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:01.285Z,1510168621.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:01.337Z,1510168621.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:01.686Z,1510168621.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:01.707Z,1510168621.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:02.071Z,1510168622.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:02.102Z,1510168622.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:02.467Z,1510168622.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:02.491Z,1510168622.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:02.892Z,1510168622.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:02.909Z,1510168622.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:03.291Z,1510168623.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:03.307Z,1510168623.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:03.683Z,1510168623.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:03.701Z,1510168623.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:04.072Z,1510168624.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:04.108Z,1510168624.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:04.471Z,1510168624.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:04.505Z,1510168624.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:04.877Z,1510168624.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:04.909Z,1510168624.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:05.293Z,1510168625.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:05.309Z,1510168625.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:05.692Z,1510168625.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:05.708Z,1510168625.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:06.072Z,1510168626.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:06.107Z,1510168626.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:06.472Z,1510168626.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:06.504Z,1510168626.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:06.886Z,1510168626.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:06.916Z,1510168626.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:07.285Z,1510168627.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:07.317Z,1510168627.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:07.682Z,1510168627.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:07.708Z,1510168627.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:08.076Z,1510168628.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:08.108Z,1510168628.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:08.467Z,1510168628.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:08.483Z,1510168628.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:08.884Z,1510168628.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:08.919Z,1510168628.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:09.286Z,1510168629.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:09.312Z,1510168629.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:09.682Z,1510168629.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:09.725Z,1510168629.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:10.068Z,1510168630.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:10.085Z,1510168630.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:10.471Z,1510168630.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:10.488Z,1510168630.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:10.887Z,1510168630.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:10.926Z,1510168630.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:11.290Z,1510168631.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:11.318Z,1510168631.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:11.686Z,1510168631.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:11.708Z,1510168631.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:12.085Z,1510168632.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:12.110Z,1510168632.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:12.469Z,1510168632.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:12.485Z,1510168632.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:12.886Z,1510168632.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:12.923Z,1510168632.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:13.281Z,1510168633.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:13.321Z,1510168633.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:13.686Z,1510168633.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:13.726Z,1510168633.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:14.075Z,1510168634.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:14.092Z,1510168634.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:14.472Z,1510168634.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:14.491Z,1510168634.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:14.881Z,1510168634.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:14.898Z,1510168634.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:15.285Z,1510168635.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:15.302Z,1510168635.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:15.689Z,1510168635.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:15.727Z,1510168635.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:16.075Z,1510168636.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:16.092Z,1510168636.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:16.479Z,1510168636.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:16.504Z,1510168636.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:16.881Z,1510168636.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:16.898Z,1510168636.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:17.286Z,1510168637.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:17.302Z,1510168637.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:17.686Z,1510168637.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:17.708Z,1510168637.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:18.078Z,1510168638.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:18.094Z,1510168638.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:18.471Z,1510168638.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:18.494Z,1510168638.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:18.886Z,1510168638.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:18.903Z,1510168638.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:19.282Z,1510168639.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:19.303Z,1510168639.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:19.682Z,1510168639.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:19.704Z,1510168639.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:20.078Z,1510168640.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:20.095Z,1510168640.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:20.477Z,1510168640.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:20.500Z,1510168640.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:20.890Z,1510168640.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:20.929Z,1510168640.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:21.286Z,1510168641.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:21.302Z,1510168641.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:21.682Z,1510168641.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:21.747Z,1510168641.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:22.078Z,1510168642.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:22.159Z,1510168642.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:22.476Z,1510168642.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:22.497Z,1510168642.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:22.886Z,1510168642.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:22.935Z,1510168642.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:23.287Z,1510168643.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:23.303Z,1510168643.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:23.685Z,1510168643.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:23.745Z,1510168643.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:24.078Z,1510168644.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:24.093Z,1510168644.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:24.474Z,1510168644.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:24.490Z,1510168644.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:24.886Z,1510168644.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:24.908Z,1510168644.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:25.286Z,1510168645.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:25.302Z,1510168645.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:25.688Z,1510168645.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:25.704Z,1510168645.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:26.082Z,1510168646.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:26.098Z,1510168646.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:26.478Z,1510168646.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:26.494Z,1510168646.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:26.887Z,1510168646.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:26.903Z,1510168646.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:27.286Z,1510168647.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:27.308Z,1510168647.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:27.687Z,1510168647.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:27.702Z,1510168647.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:28.082Z,1510168648.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:28.098Z,1510168648.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:28.499Z,1510168648.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:28.545Z,1510168648.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:28.882Z,1510168648.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:28.913Z,1510168648.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:29.282Z,1510168649.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:29.310Z,1510168649.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:29.686Z,1510168649.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:29.719Z,1510168649.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:30.068Z,1510168650.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:30.087Z,1510168650.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:30.471Z,1510168650.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:30.488Z,1510168650.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:30.886Z,1510168650.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:30.913Z,1510168650.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:31.285Z,1510168651.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:31.312Z,1510168651.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:31.682Z,1510168651.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:31.706Z,1510168651.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:32.076Z,1510168652.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:32.132Z,1510168652.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:32.475Z,1510168652.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:32.490Z,1510168652.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:32.885Z,1510168652.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:32.917Z,1510168652.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:33.289Z,1510168653.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:33.316Z,1510168653.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:33.685Z,1510168653.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:33.717Z,1510168653.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:34.076Z,1510168654.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:34.092Z,1510168654.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:34.474Z,1510168654.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:34.490Z,1510168654.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:34.885Z,1510168654.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:34.916Z,1510168654.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:35.281Z,1510168655.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:35.314Z,1510168655.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:35.686Z,1510168655.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:35.718Z,1510168655.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:36.074Z,1510168656.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:36.090Z,1510168656.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:36.473Z,1510168656.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:36.489Z,1510168656.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:36.886Z,1510168656.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:36.902Z,1510168656.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:37.285Z,1510168657.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:37.301Z,1510168657.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:37.681Z,1510168657.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:37.698Z,1510168657.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:38.075Z,1510168658.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:38.095Z,1510168658.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:38.473Z,1510168658.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:38.489Z,1510168658.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:38.881Z,1510168658.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:38.898Z,1510168658.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:39.285Z,1510168659.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:39.302Z,1510168659.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:39.685Z,1510168659.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:39.701Z,1510168659.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:40.074Z,1510168660.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:40.091Z,1510168660.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:40.474Z,1510168660.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:40.491Z,1510168660.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:40.885Z,1510168660.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:40.926Z,1510168660.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:41.281Z,1510168661.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:41.298Z,1510168661.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:41.686Z,1510168661.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:41.702Z,1510168661.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:42.075Z,1510168662.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:42.091Z,1510168662.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:42.475Z,1510168662.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:42.491Z,1510168662.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:42.890Z,1510168662.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:42.926Z,1510168662.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:42.930Z,1510168662.930 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T19:12:42.5Z
2017-11-08T19:17:42.930Z,1510168662.930 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T19:17:42.930Z,1510168662.930 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T19:17:43.289Z,1510168663.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:43.305Z,1510168663.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:46.664Z,1510168666.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:46.744Z,1510168666.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:46.849Z,1510168666.849 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171108T132236/Courier0088.lzma
2017-11-08T19:17:46.896Z,1510168666.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:46.912Z,1510168666.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:47.280Z,1510168667.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:47.296Z,1510168667.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:47.645Z,1510168667.645 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0088.lzma.bak
2017-11-08T19:17:47.646Z,1510168667.646 [DataOverHttps](INFO): SBD MOMSN=5223313
2017-11-08T19:17:47.691Z,1510168667.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:47.740Z,1510168667.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:48.638Z,1510168668.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:48.654Z,1510168668.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:48.796Z,1510168668.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:48.851Z,1510168668.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:51.886Z,1510168671.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:51.907Z,1510168671.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:52.047Z,1510168672.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:52.084Z,1510168672.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:52.448Z,1510168672.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:52.464Z,1510168672.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:52.848Z,1510168672.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:52.864Z,1510168672.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:53.249Z,1510168673.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:53.265Z,1510168673.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:53.648Z,1510168673.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:53.680Z,1510168673.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:56.739Z,1510168676.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:56.755Z,1510168676.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:56.869Z,1510168676.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:56.934Z,1510168676.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:57.244Z,1510168677.244 [DataOverHttps](INFO): Sending 221 bytes from file Logs/20171108T132236/Express0089.lzma
2017-11-08T19:17:57.292Z,1510168677.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:57.309Z,1510168677.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:57.663Z,1510168677.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:57.699Z,1510168677.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:58.042Z,1510168678.042 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0089.lzma.bak
2017-11-08T19:17:58.042Z,1510168678.042 [DataOverHttps](INFO): SBD MOMSN=5223315
2017-11-08T19:17:58.071Z,1510168678.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:58.108Z,1510168678.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:59.046Z,1510168679.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:59.062Z,1510168679.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:17:59.065Z,1510168679.065 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T19:17:59.065Z,1510168679.065 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T19:17:59.065Z,1510168679.065 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T19:17:59.193Z,1510168679.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:17:59.214Z,1510168679.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:02.277Z,1510168682.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:02.308Z,1510168682.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:02.445Z,1510168682.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:02.462Z,1510168682.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:02.824Z,1510168682.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:02.860Z,1510168682.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:03.227Z,1510168683.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:03.253Z,1510168683.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:03.619Z,1510168683.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:03.657Z,1510168683.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:04.030Z,1510168684.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:04.064Z,1510168684.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:04.429Z,1510168684.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:04.464Z,1510168684.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:04.845Z,1510168684.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:04.868Z,1510168684.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:05.220Z,1510168685.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:05.245Z,1510168685.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:05.615Z,1510168685.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:05.631Z,1510168685.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:06.020Z,1510168686.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:06.036Z,1510168686.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:06.424Z,1510168686.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:06.462Z,1510168686.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:06.818Z,1510168686.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:06.834Z,1510168686.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:07.234Z,1510168687.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:07.258Z,1510168687.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:07.634Z,1510168687.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:07.666Z,1510168687.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:08.033Z,1510168688.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:08.059Z,1510168688.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:08.419Z,1510168688.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:08.435Z,1510168688.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:08.820Z,1510168688.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:08.907Z,1510168688.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:09.220Z,1510168689.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:09.259Z,1510168689.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:09.626Z,1510168689.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:09.643Z,1510168689.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:10.033Z,1510168690.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:10.087Z,1510168690.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:10.429Z,1510168690.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:10.445Z,1510168690.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:10.834Z,1510168690.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:10.880Z,1510168690.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:11.226Z,1510168691.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:11.242Z,1510168691.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:11.621Z,1510168691.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:11.637Z,1510168691.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:12.022Z,1510168692.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:12.038Z,1510168692.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:12.423Z,1510168692.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:12.443Z,1510168692.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:12.537Z,1510168692.537 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T19:18:12.537Z,1510168692.537 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T19:18:12.725Z,1510168692.725 [Rowe_600LCM](INFO): Initializing
2017-11-08T19:18:12.725Z,1510168692.725 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T19:18:12.725Z,1510168692.725 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T19:18:12.725Z,1510168692.725 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T19:18:12.725Z,1510168692.725 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T19:18:12.822Z,1510168692.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:12.837Z,1510168692.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:12.917Z,1510168692.917 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T19:18:13.129Z,1510168693.129 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T19:18:13.245Z,1510168693.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:13.282Z,1510168693.282 [Rowe_600LCM](INFO): Powering down
2017-11-08T19:18:13.285Z,1510168693.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:13.634Z,1510168693.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:13.651Z,1510168693.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:14.033Z,1510168694.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:14.056Z,1510168694.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:14.426Z,1510168694.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:14.443Z,1510168694.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:14.525Z,1510168694.525 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T19:18:14.525Z,1510168694.525 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T19:18:14.824Z,1510168694.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:14.841Z,1510168694.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:14.898Z,1510168694.898 [Rowe_600LCM](INFO): Initializing
2017-11-08T19:18:14.900Z,1510168694.900 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T19:18:14.900Z,1510168694.900 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T19:18:14.900Z,1510168694.900 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T19:18:14.900Z,1510168694.900 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T19:18:14.925Z,1510168694.925 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T19:18:15.223Z,1510168695.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:15.243Z,1510168695.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:15.306Z,1510168695.306 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T19:18:15.402Z,1510168695.402 [Rowe_600LCM](INFO): Powering down
2017-11-08T19:18:15.630Z,1510168695.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:15.653Z,1510168695.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:16.038Z,1510168696.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:16.055Z,1510168696.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:16.433Z,1510168696.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:16.450Z,1510168696.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:16.834Z,1510168696.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:16.851Z,1510168696.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:16.945Z,1510168696.945 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T19:18:16.945Z,1510168696.945 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T19:18:17.021Z,1510168697.021 [Rowe_600LCM](INFO): Initializing
2017-11-08T19:18:17.021Z,1510168697.021 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T19:18:17.021Z,1510168697.021 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T19:18:17.021Z,1510168697.021 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T19:18:17.022Z,1510168697.022 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T19:18:17.218Z,1510168697.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:17.247Z,1510168697.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:17.329Z,1510168697.329 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T19:18:17.425Z,1510168697.425 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T19:18:17.511Z,1510168697.511 [Rowe_600LCM](INFO): Powering down
2017-11-08T19:18:17.626Z,1510168697.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:17.649Z,1510168697.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:18.025Z,1510168698.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:18.042Z,1510168698.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:18.425Z,1510168698.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:18.448Z,1510168698.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:18.827Z,1510168698.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:18.844Z,1510168698.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:18.925Z,1510168698.925 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T19:18:18.925Z,1510168698.925 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T19:18:19.125Z,1510168699.125 [Rowe_600LCM](INFO): Initializing
2017-11-08T19:18:19.125Z,1510168699.125 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T19:18:19.125Z,1510168699.125 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T19:18:19.125Z,1510168699.125 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T19:18:19.125Z,1510168699.125 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T19:18:19.255Z,1510168699.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:19.384Z,1510168699.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:19.509Z,1510168699.509 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T19:18:19.529Z,1510168699.529 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T19:18:19.635Z,1510168699.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:19.681Z,1510168699.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:20.035Z,1510168700.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:20.063Z,1510168700.063 [Rowe_600LCM](INFO): Powering down
2017-11-08T19:18:20.074Z,1510168700.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:20.420Z,1510168700.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:20.451Z,1510168700.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:20.823Z,1510168700.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:20.849Z,1510168700.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:21.216Z,1510168701.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:21.252Z,1510168701.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:21.337Z,1510168701.337 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T19:18:21.338Z,1510168701.338 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T19:18:21.616Z,1510168701.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:21.649Z,1510168701.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:21.677Z,1510168701.677 [Rowe_600LCM](INFO): Initializing
2017-11-08T19:18:21.677Z,1510168701.677 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T19:18:21.678Z,1510168701.678 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T19:18:21.678Z,1510168701.678 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T19:18:21.678Z,1510168701.678 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T19:18:21.733Z,1510168701.733 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T19:18:21.733Z,1510168701.733 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T19:18:22.034Z,1510168702.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:22.064Z,1510168702.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:22.081Z,1510168702.081 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T19:18:22.225Z,1510168702.225 [Rowe_600LCM](INFO): Powering down
2017-11-08T19:18:22.438Z,1510168702.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:22.465Z,1510168702.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:22.830Z,1510168702.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:22.863Z,1510168702.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:23.239Z,1510168703.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:23.360Z,1510168703.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:23.624Z,1510168703.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:23.640Z,1510168703.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:24.020Z,1510168704.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:24.037Z,1510168704.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:24.420Z,1510168704.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:24.437Z,1510168704.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:24.819Z,1510168704.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:24.836Z,1510168704.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:25.238Z,1510168705.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:25.264Z,1510168705.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:25.638Z,1510168705.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:25.671Z,1510168705.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:26.033Z,1510168706.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:26.068Z,1510168706.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:26.420Z,1510168706.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:26.453Z,1510168706.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:26.822Z,1510168706.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:26.838Z,1510168706.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:27.224Z,1510168707.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:27.240Z,1510168707.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:27.623Z,1510168707.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:27.668Z,1510168707.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:28.034Z,1510168708.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:28.065Z,1510168708.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:28.437Z,1510168708.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:28.471Z,1510168708.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:28.838Z,1510168708.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:28.863Z,1510168708.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:29.226Z,1510168709.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:29.258Z,1510168709.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:29.623Z,1510168709.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:29.639Z,1510168709.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:30.023Z,1510168710.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:30.039Z,1510168710.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:30.424Z,1510168710.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:30.441Z,1510168710.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:30.822Z,1510168710.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:30.839Z,1510168710.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:31.230Z,1510168711.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:31.307Z,1510168711.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:31.634Z,1510168711.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:31.650Z,1510168711.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:32.038Z,1510168712.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:32.070Z,1510168712.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:32.421Z,1510168712.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:32.479Z,1510168712.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:32.824Z,1510168712.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:32.840Z,1510168712.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:33.223Z,1510168713.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:33.279Z,1510168713.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:33.627Z,1510168713.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:33.643Z,1510168713.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:34.030Z,1510168714.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:34.046Z,1510168714.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:34.429Z,1510168714.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:34.445Z,1510168714.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:34.830Z,1510168714.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:34.846Z,1510168714.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:35.230Z,1510168715.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:35.247Z,1510168715.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:35.625Z,1510168715.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:35.641Z,1510168715.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:36.021Z,1510168716.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:36.037Z,1510168716.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:36.427Z,1510168716.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:36.448Z,1510168716.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:36.826Z,1510168716.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:36.847Z,1510168716.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:37.234Z,1510168717.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:37.250Z,1510168717.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:37.638Z,1510168717.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:37.654Z,1510168717.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:38.034Z,1510168718.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:38.050Z,1510168718.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:38.427Z,1510168718.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:38.444Z,1510168718.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:38.824Z,1510168718.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:38.841Z,1510168718.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:39.223Z,1510168719.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:39.243Z,1510168719.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:39.621Z,1510168719.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:39.639Z,1510168719.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:40.038Z,1510168720.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:40.055Z,1510168720.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:40.433Z,1510168720.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:40.450Z,1510168720.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:40.830Z,1510168720.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:40.847Z,1510168720.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:41.229Z,1510168721.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:41.245Z,1510168721.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:41.625Z,1510168721.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:41.675Z,1510168721.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:42.023Z,1510168722.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:42.044Z,1510168722.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:42.424Z,1510168722.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:42.441Z,1510168722.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:42.825Z,1510168722.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:42.841Z,1510168722.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:43.234Z,1510168723.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:43.256Z,1510168723.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:43.633Z,1510168723.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:43.650Z,1510168723.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:44.029Z,1510168724.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:44.045Z,1510168724.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:44.421Z,1510168724.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:44.437Z,1510168724.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:44.824Z,1510168724.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:44.840Z,1510168724.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:45.223Z,1510168725.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:45.243Z,1510168725.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:45.621Z,1510168725.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:45.637Z,1510168725.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:46.030Z,1510168726.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:46.046Z,1510168726.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:46.433Z,1510168726.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:46.449Z,1510168726.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:46.830Z,1510168726.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:46.846Z,1510168726.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:47.225Z,1510168727.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:47.242Z,1510168727.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:47.626Z,1510168727.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:47.642Z,1510168727.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:48.025Z,1510168728.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:48.042Z,1510168728.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:48.426Z,1510168728.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:48.442Z,1510168728.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:48.819Z,1510168728.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:48.841Z,1510168728.841 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:48.841Z,1510168728.841 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 118
2017-11-08T19:18:48.841Z,1510168728.841 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T19:18:48.842Z,1510168728.842 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:48.843Z,1510168728.843 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 118
2017-11-08T19:18:48.843Z,1510168728.843 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T19:18:48.844Z,1510168728.844 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:48.845Z,1510168728.845 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 118
2017-11-08T19:18:48.845Z,1510168728.845 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T19:18:48.921Z,1510168728.921 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T19:18:48.921Z,1510168728.921 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T19:18:48.921Z,1510168728.921 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T19:18:49.236Z,1510168729.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:49.325Z,1510168729.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T19:18:49.325Z,1510168729.325 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 118
2017-11-08T19:18:49.325Z,1510168729.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T19:18:49.326Z,1510168729.326 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 118
2017-11-08T19:18:49.326Z,1510168729.326 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T19:18:49.326Z,1510168729.326 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 118
2017-11-08T19:18:49.638Z,1510168729.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:49.653Z,1510168729.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T19:18:49.654Z,1510168729.654 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:18:49.654Z,1510168729.654 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:18:49.654Z,1510168729.654 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T19:18:49.655Z,1510168729.655 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:18:49.655Z,1510168729.655 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:18:49.655Z,1510168729.655 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T19:18:49.656Z,1510168729.656 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:18:49.656Z,1510168729.656 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:18:50.036Z,1510168730.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:50.052Z,1510168730.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T19:18:50.053Z,1510168730.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:50.415Z,1510168730.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:50.443Z,1510168730.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T19:18:50.444Z,1510168730.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:50.819Z,1510168730.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:50.849Z,1510168730.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T19:18:50.850Z,1510168730.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:51.224Z,1510168731.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:51.249Z,1510168731.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T19:18:51.250Z,1510168731.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:51.619Z,1510168731.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:51.649Z,1510168731.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T19:18:51.650Z,1510168731.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:52.036Z,1510168732.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:52.052Z,1510168732.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T19:18:52.053Z,1510168732.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:52.437Z,1510168732.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:52.453Z,1510168732.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T19:18:52.454Z,1510168732.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:52.840Z,1510168732.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:52.855Z,1510168732.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T19:18:52.857Z,1510168732.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:53.215Z,1510168733.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:53.249Z,1510168733.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T19:18:53.250Z,1510168733.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:53.619Z,1510168733.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:53.709Z,1510168733.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-08T19:18:53.710Z,1510168733.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:54.015Z,1510168734.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:54.049Z,1510168734.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T19:18:54.050Z,1510168734.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:54.424Z,1510168734.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:54.496Z,1510168734.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-11-08T19:18:54.497Z,1510168734.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:54.819Z,1510168734.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:54.854Z,1510168734.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T19:18:54.855Z,1510168734.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:55.239Z,1510168735.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:55.296Z,1510168735.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-08T19:18:55.297Z,1510168735.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:55.638Z,1510168735.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:55.654Z,1510168735.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T19:18:55.655Z,1510168735.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:56.040Z,1510168736.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:56.055Z,1510168736.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T19:18:56.056Z,1510168736.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:56.415Z,1510168736.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:56.449Z,1510168736.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T19:18:56.450Z,1510168736.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:56.819Z,1510168736.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:56.849Z,1510168736.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T19:18:56.850Z,1510168736.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:57.220Z,1510168737.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:57.249Z,1510168737.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T19:18:57.250Z,1510168737.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:57.619Z,1510168737.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:57.649Z,1510168737.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T19:18:57.650Z,1510168737.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:58.036Z,1510168738.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:58.059Z,1510168738.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T19:18:58.060Z,1510168738.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:58.429Z,1510168738.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:58.454Z,1510168738.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T19:18:58.455Z,1510168738.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:58.830Z,1510168738.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:58.859Z,1510168738.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T19:18:58.860Z,1510168738.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:59.220Z,1510168739.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:59.251Z,1510168739.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T19:18:59.252Z,1510168739.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:18:59.619Z,1510168739.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:18:59.634Z,1510168739.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T19:18:59.635Z,1510168739.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:02.702Z,1510168742.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:02.723Z,1510168742.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2017-11-08T19:19:02.724Z,1510168742.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:02.836Z,1510168742.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:02.865Z,1510168742.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T19:19:02.866Z,1510168742.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:03.260Z,1510168743.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:03.283Z,1510168743.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T19:19:03.284Z,1510168743.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:03.657Z,1510168743.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:03.711Z,1510168743.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T19:19:03.712Z,1510168743.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:04.056Z,1510168744.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:04.072Z,1510168744.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T19:19:04.073Z,1510168744.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:04.436Z,1510168744.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:04.467Z,1510168744.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T19:19:04.468Z,1510168744.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:04.835Z,1510168744.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:04.860Z,1510168744.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T19:19:04.861Z,1510168744.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:05.236Z,1510168745.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:05.261Z,1510168745.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T19:19:05.262Z,1510168745.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:05.635Z,1510168745.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:05.661Z,1510168745.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T19:19:05.662Z,1510168745.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:06.051Z,1510168746.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:06.068Z,1510168746.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T19:19:06.069Z,1510168746.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:06.451Z,1510168746.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:06.467Z,1510168746.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T19:19:06.468Z,1510168746.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:06.857Z,1510168746.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:06.873Z,1510168746.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T19:19:06.874Z,1510168746.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:07.231Z,1510168747.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:07.261Z,1510168747.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T19:19:07.262Z,1510168747.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:07.635Z,1510168747.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:07.659Z,1510168747.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T19:19:07.660Z,1510168747.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:08.040Z,1510168748.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:08.066Z,1510168748.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T19:19:08.067Z,1510168748.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:08.431Z,1510168748.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:08.471Z,1510168748.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T19:19:08.472Z,1510168748.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:08.849Z,1510168748.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:08.865Z,1510168748.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:09.257Z,1510168749.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:09.273Z,1510168749.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:09.646Z,1510168749.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:09.668Z,1510168749.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:10.036Z,1510168750.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:10.061Z,1510168750.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:10.436Z,1510168750.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:10.463Z,1510168750.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:10.835Z,1510168750.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:10.861Z,1510168750.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:11.252Z,1510168751.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:11.268Z,1510168751.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:11.657Z,1510168751.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:11.673Z,1510168751.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:12.051Z,1510168752.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:12.068Z,1510168752.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:12.431Z,1510168752.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:12.472Z,1510168752.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:12.835Z,1510168752.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:12.860Z,1510168752.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:13.236Z,1510168753.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:13.273Z,1510168753.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:13.631Z,1510168753.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:13.651Z,1510168753.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:14.050Z,1510168754.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:14.077Z,1510168754.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:14.450Z,1510168754.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:14.476Z,1510168754.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:14.845Z,1510168754.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:14.877Z,1510168754.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:15.232Z,1510168755.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:15.248Z,1510168755.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:15.639Z,1510168755.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:15.685Z,1510168755.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:16.038Z,1510168756.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:16.053Z,1510168756.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:16.437Z,1510168756.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:16.454Z,1510168756.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:16.833Z,1510168756.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:16.850Z,1510168756.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:17.249Z,1510168757.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:17.281Z,1510168757.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:17.650Z,1510168757.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:17.682Z,1510168757.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:18.050Z,1510168758.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:18.080Z,1510168758.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:18.438Z,1510168758.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:18.454Z,1510168758.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:18.838Z,1510168758.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:18.847Z,1510168758.847 [BPC1](ERROR): Failed to receive battery data
2017-11-08T19:19:18.848Z,1510168758.848 [BPC1] Communications Fault, FailCount= 1
2017-11-08T19:19:18.848Z,1510168758.848 [BPC1](ERROR): Communications Fault
2017-11-08T19:19:18.857Z,1510168758.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:18.957Z,1510168758.957 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T19:19:19.239Z,1510168759.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:19.256Z,1510168759.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:19.638Z,1510168759.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:19.654Z,1510168759.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:20.050Z,1510168760.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:20.085Z,1510168760.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:20.173Z,1510168760.173 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T19:19:20.173Z,1510168760.173 [BPC1] No Fault, FailCount= 1
2017-11-08T19:19:20.446Z,1510168760.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:20.528Z,1510168760.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:20.849Z,1510168760.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:20.886Z,1510168760.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:21.238Z,1510168761.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:21.255Z,1510168761.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:21.638Z,1510168761.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:21.655Z,1510168761.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:22.034Z,1510168762.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:22.055Z,1510168762.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:22.439Z,1510168762.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:22.460Z,1510168762.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:22.834Z,1510168762.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:22.850Z,1510168762.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:23.245Z,1510168763.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:23.261Z,1510168763.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:23.649Z,1510168763.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:23.688Z,1510168763.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:24.046Z,1510168764.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:24.062Z,1510168764.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:24.438Z,1510168764.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:24.453Z,1510168764.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:24.838Z,1510168764.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:24.854Z,1510168764.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:25.238Z,1510168765.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:25.259Z,1510168765.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:25.637Z,1510168765.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:25.653Z,1510168765.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:26.075Z,1510168766.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:26.096Z,1510168766.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:26.448Z,1510168766.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:26.472Z,1510168766.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:26.848Z,1510168766.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:26.867Z,1510168766.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:27.251Z,1510168767.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:27.272Z,1510168767.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:27.633Z,1510168767.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:27.681Z,1510168767.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:28.035Z,1510168768.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:28.069Z,1510168768.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:28.436Z,1510168768.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:28.472Z,1510168768.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:28.835Z,1510168768.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:28.884Z,1510168768.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:29.252Z,1510168769.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:29.268Z,1510168769.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:29.655Z,1510168769.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:29.675Z,1510168769.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:30.052Z,1510168770.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:30.068Z,1510168770.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:30.435Z,1510168770.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:30.469Z,1510168770.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:30.835Z,1510168770.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:30.871Z,1510168770.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:31.236Z,1510168771.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:31.266Z,1510168771.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:31.635Z,1510168771.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:31.665Z,1510168771.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:32.055Z,1510168772.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:32.075Z,1510168772.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:32.454Z,1510168772.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:32.470Z,1510168772.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:32.852Z,1510168772.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:32.868Z,1510168772.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:33.233Z,1510168773.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:33.270Z,1510168773.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:33.635Z,1510168773.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:33.669Z,1510168773.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:34.035Z,1510168774.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:34.069Z,1510168774.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:34.436Z,1510168774.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:34.470Z,1510168774.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:34.835Z,1510168774.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:34.869Z,1510168774.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:35.258Z,1510168775.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:35.274Z,1510168775.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:35.646Z,1510168775.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:35.680Z,1510168775.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:36.046Z,1510168776.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:36.088Z,1510168776.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:36.436Z,1510168776.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:36.469Z,1510168776.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:36.838Z,1510168776.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:36.878Z,1510168776.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:37.235Z,1510168777.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:37.270Z,1510168777.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:37.635Z,1510168777.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:37.671Z,1510168777.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:38.050Z,1510168778.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:38.076Z,1510168778.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:38.461Z,1510168778.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:38.478Z,1510168778.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:38.842Z,1510168778.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:38.882Z,1510168778.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:39.238Z,1510168779.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:39.294Z,1510168779.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:39.639Z,1510168779.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:39.688Z,1510168779.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:40.040Z,1510168780.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:40.056Z,1510168780.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:40.440Z,1510168780.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:40.456Z,1510168780.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:40.837Z,1510168780.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:40.891Z,1510168780.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:41.254Z,1510168781.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:41.301Z,1510168781.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:41.646Z,1510168781.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:41.700Z,1510168781.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:42.047Z,1510168782.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:42.063Z,1510168782.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:42.439Z,1510168782.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:42.455Z,1510168782.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:42.838Z,1510168782.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:42.859Z,1510168782.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:43.241Z,1510168783.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:43.264Z,1510168783.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:43.637Z,1510168783.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:43.660Z,1510168783.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:44.051Z,1510168784.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:44.068Z,1510168784.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:44.452Z,1510168784.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:44.469Z,1510168784.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:44.851Z,1510168784.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:44.872Z,1510168784.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:45.242Z,1510168785.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:45.267Z,1510168785.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:45.635Z,1510168785.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:45.664Z,1510168785.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:46.045Z,1510168786.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:46.067Z,1510168786.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:46.441Z,1510168786.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:46.457Z,1510168786.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:46.842Z,1510168786.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:46.858Z,1510168786.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:47.248Z,1510168787.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:47.264Z,1510168787.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:47.655Z,1510168787.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:47.671Z,1510168787.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:48.058Z,1510168788.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:48.074Z,1510168788.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:48.443Z,1510168788.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:48.458Z,1510168788.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:48.842Z,1510168788.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:48.863Z,1510168788.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:49.238Z,1510168789.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:49.260Z,1510168789.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:49.642Z,1510168789.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:49.658Z,1510168789.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:50.055Z,1510168790.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:50.107Z,1510168790.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:50.452Z,1510168790.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:50.471Z,1510168790.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:50.854Z,1510168790.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:50.875Z,1510168790.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:51.243Z,1510168791.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:51.259Z,1510168791.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:51.632Z,1510168791.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:51.664Z,1510168791.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:52.032Z,1510168792.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:52.063Z,1510168792.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:52.443Z,1510168792.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:52.466Z,1510168792.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:52.831Z,1510168792.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:52.857Z,1510168792.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:53.252Z,1510168793.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:53.268Z,1510168793.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:53.655Z,1510168793.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:53.671Z,1510168793.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:54.052Z,1510168794.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:54.068Z,1510168794.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:54.431Z,1510168794.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:54.456Z,1510168794.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:54.831Z,1510168794.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:54.876Z,1510168794.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:55.232Z,1510168795.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:55.257Z,1510168795.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:55.631Z,1510168795.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:55.655Z,1510168795.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:56.051Z,1510168796.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:56.075Z,1510168796.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:56.457Z,1510168796.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:56.475Z,1510168796.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:56.848Z,1510168796.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:56.865Z,1510168796.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:57.231Z,1510168797.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:57.266Z,1510168797.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:57.639Z,1510168797.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:57.668Z,1510168797.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:58.035Z,1510168798.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:58.067Z,1510168798.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:58.440Z,1510168798.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:58.467Z,1510168798.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:58.838Z,1510168798.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:58.868Z,1510168798.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:59.255Z,1510168799.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:59.273Z,1510168799.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:19:59.656Z,1510168799.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:19:59.675Z,1510168799.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:02.768Z,1510168802.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:02.834Z,1510168802.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:02.962Z,1510168802.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:03.010Z,1510168803.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:03.359Z,1510168803.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:03.415Z,1510168803.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:03.758Z,1510168803.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:03.776Z,1510168803.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:04.152Z,1510168804.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:04.215Z,1510168804.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:04.554Z,1510168804.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:04.576Z,1510168804.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:04.972Z,1510168804.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:04.997Z,1510168804.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:05.370Z,1510168805.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:05.387Z,1510168805.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:05.767Z,1510168805.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:05.834Z,1510168805.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:06.145Z,1510168806.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:06.185Z,1510168806.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:06.547Z,1510168806.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:06.583Z,1510168806.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:06.943Z,1510168806.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:07.040Z,1510168807.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:07.351Z,1510168807.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:07.372Z,1510168807.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:07.747Z,1510168807.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:07.772Z,1510168807.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:08.170Z,1510168808.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:08.186Z,1510168808.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:08.569Z,1510168808.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:08.594Z,1510168808.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:08.976Z,1510168808.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:09.027Z,1510168809.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:09.349Z,1510168809.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:09.424Z,1510168809.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:09.747Z,1510168809.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:09.779Z,1510168809.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:10.210Z,1510168810.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:10.234Z,1510168810.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:10.543Z,1510168810.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:10.580Z,1510168810.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:10.970Z,1510168810.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:10.987Z,1510168810.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:11.373Z,1510168811.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:11.389Z,1510168811.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:11.767Z,1510168811.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:11.784Z,1510168811.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:12.151Z,1510168812.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:12.186Z,1510168812.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:12.551Z,1510168812.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:12.631Z,1510168812.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:12.943Z,1510168812.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:12.975Z,1510168812.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:13.348Z,1510168813.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:13.374Z,1510168813.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:13.747Z,1510168813.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:13.772Z,1510168813.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:14.169Z,1510168814.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:14.190Z,1510168814.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:14.568Z,1510168814.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:14.592Z,1510168814.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:14.967Z,1510168814.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:14.984Z,1510168814.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:15.365Z,1510168815.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:15.384Z,1510168815.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:15.748Z,1510168815.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:15.773Z,1510168815.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:16.152Z,1510168816.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:16.177Z,1510168816.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:16.543Z,1510168816.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:16.578Z,1510168816.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:16.976Z,1510168816.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:16.993Z,1510168816.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:17.366Z,1510168817.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:17.425Z,1510168817.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:17.778Z,1510168817.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:17.793Z,1510168817.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:18.148Z,1510168818.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:18.183Z,1510168818.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:18.548Z,1510168818.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:18.583Z,1510168818.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:18.954Z,1510168818.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:18.981Z,1510168818.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:19.349Z,1510168819.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:19.389Z,1510168819.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:19.747Z,1510168819.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:19.785Z,1510168819.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:20.158Z,1510168820.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:20.191Z,1510168820.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:20.577Z,1510168820.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:20.594Z,1510168820.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:20.962Z,1510168820.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:20.992Z,1510168820.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:21.354Z,1510168821.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:21.391Z,1510168821.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:21.747Z,1510168821.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:21.791Z,1510168821.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:22.148Z,1510168822.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:22.181Z,1510168822.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:22.548Z,1510168822.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:22.556Z,1510168822.556 [BPC1](ERROR): Failed to parse message.
2017-11-08T19:20:22.556Z,1510168822.556 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-08T19:20:22.557Z,1510168822.557 [BPC1] Data Fault, FailCount= 1
2017-11-08T19:20:22.557Z,1510168822.557 [BPC1](ERROR): Data Fault
2017-11-08T19:20:22.566Z,1510168822.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:22.665Z,1510168822.665 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T19:20:22.962Z,1510168822.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:22.999Z,1510168822.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:23.361Z,1510168823.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:23.378Z,1510168823.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:23.760Z,1510168823.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:23.778Z,1510168823.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:23.884Z,1510168823.884 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T19:20:23.884Z,1510168823.884 [BPC1] No Fault, FailCount= 1
2017-11-08T19:20:24.162Z,1510168824.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:24.245Z,1510168824.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:24.554Z,1510168824.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:24.573Z,1510168824.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:24.954Z,1510168824.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:24.971Z,1510168824.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:25.358Z,1510168825.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:25.377Z,1510168825.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:25.753Z,1510168825.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:25.770Z,1510168825.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:26.160Z,1510168826.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:26.183Z,1510168826.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:26.576Z,1510168826.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:26.610Z,1510168826.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:26.959Z,1510168826.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:26.976Z,1510168826.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:27.377Z,1510168827.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:27.412Z,1510168827.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:27.757Z,1510168827.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:27.773Z,1510168827.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:28.161Z,1510168828.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:28.184Z,1510168828.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:28.556Z,1510168828.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:28.576Z,1510168828.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:28.964Z,1510168828.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:28.983Z,1510168828.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:29.363Z,1510168829.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:29.384Z,1510168829.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:29.765Z,1510168829.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:29.781Z,1510168829.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:30.155Z,1510168830.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:30.175Z,1510168830.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:30.572Z,1510168830.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:30.603Z,1510168830.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:30.957Z,1510168830.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:30.973Z,1510168830.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:31.358Z,1510168831.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:31.375Z,1510168831.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:31.752Z,1510168831.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:31.790Z,1510168831.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:32.167Z,1510168832.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:32.184Z,1510168832.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:32.562Z,1510168832.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:32.619Z,1510168832.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:32.963Z,1510168832.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:32.981Z,1510168832.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:33.350Z,1510168833.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:33.373Z,1510168833.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:33.753Z,1510168833.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:33.777Z,1510168833.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:34.151Z,1510168834.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:34.174Z,1510168834.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:34.554Z,1510168834.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:34.571Z,1510168834.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:34.963Z,1510168834.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:34.980Z,1510168834.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:35.362Z,1510168835.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:35.384Z,1510168835.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:35.764Z,1510168835.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:35.781Z,1510168835.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:36.153Z,1510168836.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:36.176Z,1510168836.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:36.553Z,1510168836.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:36.570Z,1510168836.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:36.958Z,1510168836.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:36.976Z,1510168836.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:37.354Z,1510168837.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:37.376Z,1510168837.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:37.751Z,1510168837.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:37.776Z,1510168837.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:38.168Z,1510168838.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:38.185Z,1510168838.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:38.564Z,1510168838.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:38.581Z,1510168838.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:38.963Z,1510168838.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:38.987Z,1510168838.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:39.370Z,1510168839.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:39.397Z,1510168839.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:39.744Z,1510168839.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:39.770Z,1510168839.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:40.148Z,1510168840.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:40.190Z,1510168840.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:40.544Z,1510168840.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:40.587Z,1510168840.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:40.958Z,1510168840.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:40.993Z,1510168840.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:41.366Z,1510168841.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:41.398Z,1510168841.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:41.777Z,1510168841.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:41.799Z,1510168841.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:42.154Z,1510168842.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:42.200Z,1510168842.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:42.549Z,1510168842.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:42.582Z,1510168842.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:42.950Z,1510168842.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:42.967Z,1510168842.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:43.358Z,1510168843.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:43.435Z,1510168843.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:43.752Z,1510168843.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:43.770Z,1510168843.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:44.161Z,1510168844.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:44.215Z,1510168844.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:44.562Z,1510168844.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:44.580Z,1510168844.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:44.971Z,1510168844.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:45.020Z,1510168845.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:45.360Z,1510168845.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:45.377Z,1510168845.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:45.749Z,1510168845.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:45.765Z,1510168845.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:46.168Z,1510168846.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:46.201Z,1510168846.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:46.549Z,1510168846.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:46.582Z,1510168846.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:46.967Z,1510168846.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:46.996Z,1510168846.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:47.371Z,1510168847.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:47.392Z,1510168847.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:47.764Z,1510168847.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:47.781Z,1510168847.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:48.145Z,1510168848.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:48.170Z,1510168848.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:48.547Z,1510168848.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:48.580Z,1510168848.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:48.943Z,1510168848.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:48.959Z,1510168848.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:49.353Z,1510168849.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:49.388Z,1510168849.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:49.747Z,1510168849.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:49.791Z,1510168849.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:50.157Z,1510168850.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:50.190Z,1510168850.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:50.577Z,1510168850.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:50.594Z,1510168850.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:50.958Z,1510168850.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:50.998Z,1510168850.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:51.348Z,1510168851.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:51.363Z,1510168851.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:51.745Z,1510168851.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:51.761Z,1510168851.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:52.154Z,1510168852.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:52.194Z,1510168852.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:52.555Z,1510168852.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:52.608Z,1510168852.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:52.962Z,1510168852.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:52.997Z,1510168852.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:53.365Z,1510168853.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:53.416Z,1510168853.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:53.766Z,1510168853.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:53.803Z,1510168853.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:54.156Z,1510168854.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:54.173Z,1510168854.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:54.550Z,1510168854.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:54.570Z,1510168854.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:54.946Z,1510168854.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:54.967Z,1510168854.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:55.351Z,1510168855.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:55.367Z,1510168855.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:55.752Z,1510168855.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:55.769Z,1510168855.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:56.162Z,1510168856.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:56.200Z,1510168856.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:56.558Z,1510168856.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:56.575Z,1510168856.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:56.958Z,1510168856.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:56.975Z,1510168856.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:57.350Z,1510168857.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:57.366Z,1510168857.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:57.747Z,1510168857.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:57.779Z,1510168857.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:58.152Z,1510168858.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:58.192Z,1510168858.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:58.554Z,1510168858.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:58.572Z,1510168858.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:58.962Z,1510168858.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:58.980Z,1510168858.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:59.364Z,1510168859.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:59.383Z,1510168859.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:20:59.769Z,1510168859.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:20:59.787Z,1510168859.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:00.150Z,1510168860.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:00.184Z,1510168860.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:00.547Z,1510168860.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:00.576Z,1510168860.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:00.952Z,1510168860.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:00.980Z,1510168860.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:01.366Z,1510168861.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:01.388Z,1510168861.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:01.747Z,1510168861.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:01.776Z,1510168861.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:02.168Z,1510168862.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:02.185Z,1510168862.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:02.568Z,1510168862.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:02.585Z,1510168862.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:02.967Z,1510168862.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:02.988Z,1510168862.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:03.347Z,1510168863.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:03.373Z,1510168863.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:03.751Z,1510168863.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:03.784Z,1510168863.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:04.152Z,1510168864.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:04.246Z,1510168864.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:07.623Z,1510168867.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:07.639Z,1510168867.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:07.852Z,1510168867.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:07.883Z,1510168867.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:08.230Z,1510168868.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:08.285Z,1510168868.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:08.627Z,1510168868.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:08.644Z,1510168868.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:09.005Z,1510168869.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:09.068Z,1510168869.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:09.408Z,1510168869.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:09.424Z,1510168869.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:09.808Z,1510168869.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:09.823Z,1510168869.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:10.214Z,1510168870.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:10.244Z,1510168870.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:10.619Z,1510168870.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:10.636Z,1510168870.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:11.021Z,1510168871.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:11.037Z,1510168871.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:11.436Z,1510168871.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:11.473Z,1510168871.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:11.807Z,1510168871.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:11.830Z,1510168871.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:12.210Z,1510168872.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:12.226Z,1510168872.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:12.608Z,1510168872.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:12.624Z,1510168872.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:13.019Z,1510168873.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:13.039Z,1510168873.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:13.425Z,1510168873.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:13.441Z,1510168873.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:13.822Z,1510168873.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:13.838Z,1510168873.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:14.210Z,1510168874.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:14.235Z,1510168874.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:14.611Z,1510168874.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:14.629Z,1510168874.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:14.998Z,1510168874.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:15.032Z,1510168875.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:15.406Z,1510168875.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:15.447Z,1510168875.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:15.813Z,1510168875.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:15.838Z,1510168875.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:16.235Z,1510168876.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:16.277Z,1510168876.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:16.631Z,1510168876.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:16.674Z,1510168876.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:17.024Z,1510168877.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:17.042Z,1510168877.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:17.400Z,1510168877.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:17.451Z,1510168877.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:17.812Z,1510168877.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:17.850Z,1510168877.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:18.204Z,1510168878.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:18.239Z,1510168878.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:18.599Z,1510168878.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:18.634Z,1510168878.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:19.020Z,1510168879.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:19.036Z,1510168879.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:19.425Z,1510168879.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:19.444Z,1510168879.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:19.823Z,1510168879.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:19.845Z,1510168879.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:20.208Z,1510168880.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:20.253Z,1510168880.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:20.607Z,1510168880.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:20.623Z,1510168880.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:21.007Z,1510168881.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:21.025Z,1510168881.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:21.408Z,1510168881.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:21.424Z,1510168881.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:21.807Z,1510168881.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:21.822Z,1510168881.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:22.221Z,1510168882.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:22.253Z,1510168882.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:22.618Z,1510168882.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:22.635Z,1510168882.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:23.017Z,1510168883.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:23.039Z,1510168883.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:23.408Z,1510168883.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:23.425Z,1510168883.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:23.808Z,1510168883.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:23.829Z,1510168883.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:24.205Z,1510168884.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:24.250Z,1510168884.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:24.608Z,1510168884.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:24.632Z,1510168884.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:25.015Z,1510168885.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:25.036Z,1510168885.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:25.420Z,1510168885.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:25.443Z,1510168885.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:25.815Z,1510168885.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:25.832Z,1510168885.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:26.218Z,1510168886.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:26.248Z,1510168886.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:26.607Z,1510168886.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:26.624Z,1510168886.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:27.002Z,1510168887.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:27.036Z,1510168887.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:27.411Z,1510168887.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:27.431Z,1510168887.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:27.810Z,1510168887.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:27.818Z,1510168887.818 [BPC1](ERROR): Failed to parse message.
2017-11-08T19:21:27.818Z,1510168887.818 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T19:21:27.818Z,1510168887.818 [BPC1] Data Fault, FailCount= 1
2017-11-08T19:21:27.818Z,1510168887.818 [BPC1](ERROR): Data Fault
2017-11-08T19:21:27.833Z,1510168887.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:27.921Z,1510168887.921 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T19:21:28.221Z,1510168888.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:28.238Z,1510168888.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:28.627Z,1510168888.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:28.644Z,1510168888.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:29.028Z,1510168889.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:29.047Z,1510168889.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:29.157Z,1510168889.157 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T19:21:29.157Z,1510168889.157 [BPC1] No Fault, FailCount= 1
2017-11-08T19:21:29.403Z,1510168889.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:29.473Z,1510168889.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:29.807Z,1510168889.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:29.841Z,1510168889.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:30.204Z,1510168890.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:30.230Z,1510168890.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:30.603Z,1510168890.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:30.632Z,1510168890.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:31.020Z,1510168891.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:31.037Z,1510168891.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:31.420Z,1510168891.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:31.451Z,1510168891.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:31.816Z,1510168891.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:31.832Z,1510168891.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:32.203Z,1510168892.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:32.235Z,1510168892.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:32.606Z,1510168892.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:32.631Z,1510168892.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:32.999Z,1510168892.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:33.038Z,1510168893.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:33.417Z,1510168893.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:33.433Z,1510168893.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:33.803Z,1510168893.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:33.837Z,1510168893.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:34.214Z,1510168894.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:34.235Z,1510168894.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:34.624Z,1510168894.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:34.640Z,1510168894.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:35.025Z,1510168895.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:35.047Z,1510168895.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:35.403Z,1510168895.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:35.435Z,1510168895.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:35.807Z,1510168895.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:35.840Z,1510168895.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:36.200Z,1510168896.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:36.237Z,1510168896.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:36.599Z,1510168896.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:36.630Z,1510168896.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:37.020Z,1510168897.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:37.036Z,1510168897.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:37.431Z,1510168897.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:37.451Z,1510168897.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:37.814Z,1510168897.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:37.875Z,1510168897.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:38.203Z,1510168898.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:38.238Z,1510168898.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:38.605Z,1510168898.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:38.631Z,1510168898.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:39.003Z,1510168899.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:39.040Z,1510168899.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:39.412Z,1510168899.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:39.446Z,1510168899.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:39.803Z,1510168899.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:39.839Z,1510168899.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:40.220Z,1510168900.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:40.237Z,1510168900.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:40.624Z,1510168900.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:40.641Z,1510168900.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:41.021Z,1510168901.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:41.043Z,1510168901.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:41.403Z,1510168901.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:41.440Z,1510168901.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:41.803Z,1510168901.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:41.836Z,1510168901.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:42.204Z,1510168902.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:42.243Z,1510168902.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:42.603Z,1510168902.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:42.636Z,1510168902.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:43.020Z,1510168903.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:43.037Z,1510168903.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:43.421Z,1510168903.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:43.457Z,1510168903.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:43.810Z,1510168903.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:43.842Z,1510168903.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:44.203Z,1510168904.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:44.238Z,1510168904.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:44.603Z,1510168904.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:44.634Z,1510168904.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:44.999Z,1510168904.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:45.034Z,1510168905.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:45.404Z,1510168905.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:45.438Z,1510168905.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:45.803Z,1510168905.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:45.834Z,1510168905.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:46.220Z,1510168906.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:46.237Z,1510168906.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:46.618Z,1510168906.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:46.639Z,1510168906.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:47.025Z,1510168907.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:47.042Z,1510168907.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:47.403Z,1510168907.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:47.440Z,1510168907.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:47.803Z,1510168907.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:47.838Z,1510168907.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:48.200Z,1510168908.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:48.234Z,1510168908.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:48.603Z,1510168908.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:48.640Z,1510168908.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:49.025Z,1510168909.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:49.100Z,1510168909.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:49.425Z,1510168909.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:49.441Z,1510168909.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:49.810Z,1510168909.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:49.876Z,1510168909.876 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:49.876Z,1510168909.876 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 119
2017-11-08T19:21:49.876Z,1510168909.876 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T19:21:49.878Z,1510168909.878 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:49.878Z,1510168909.878 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 119
2017-11-08T19:21:49.878Z,1510168909.878 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T19:21:49.880Z,1510168909.880 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:49.880Z,1510168909.880 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 119
2017-11-08T19:21:49.880Z,1510168909.880 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T19:21:49.963Z,1510168909.963 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T19:21:49.963Z,1510168909.963 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T19:21:49.964Z,1510168909.964 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T19:21:50.200Z,1510168910.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:50.326Z,1510168910.326 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T19:21:50.326Z,1510168910.326 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 119
2017-11-08T19:21:50.326Z,1510168910.326 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T19:21:50.327Z,1510168910.327 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 119
2017-11-08T19:21:50.327Z,1510168910.327 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T19:21:50.327Z,1510168910.327 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 119
2017-11-08T19:21:50.600Z,1510168910.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:50.651Z,1510168910.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T19:21:50.652Z,1510168910.652 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:21:50.652Z,1510168910.652 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:21:50.653Z,1510168910.653 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T19:21:50.653Z,1510168910.653 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:21:50.653Z,1510168910.653 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:21:50.654Z,1510168910.654 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T19:21:50.654Z,1510168910.654 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:21:50.654Z,1510168910.654 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:21:50.999Z,1510168910.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:51.039Z,1510168911.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T19:21:51.040Z,1510168911.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:51.407Z,1510168911.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:51.423Z,1510168911.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s.
2017-11-08T19:21:51.424Z,1510168911.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:51.806Z,1510168911.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:51.822Z,1510168911.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2017-11-08T19:21:51.823Z,1510168911.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:52.225Z,1510168912.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:52.251Z,1510168912.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T19:21:52.252Z,1510168912.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:52.635Z,1510168912.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:52.654Z,1510168912.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T19:21:52.655Z,1510168912.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:53.018Z,1510168913.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:53.050Z,1510168913.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T19:21:53.051Z,1510168913.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:53.408Z,1510168913.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:53.424Z,1510168913.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2017-11-08T19:21:53.426Z,1510168913.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:53.807Z,1510168913.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:53.823Z,1510168913.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-11-08T19:21:53.824Z,1510168913.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:54.212Z,1510168914.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:54.228Z,1510168914.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T19:21:54.229Z,1510168914.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:54.614Z,1510168914.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:54.635Z,1510168914.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T19:21:54.636Z,1510168914.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:55.018Z,1510168915.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:55.034Z,1510168915.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T19:21:55.035Z,1510168915.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:55.420Z,1510168915.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:55.436Z,1510168915.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T19:21:55.437Z,1510168915.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:55.811Z,1510168915.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:55.832Z,1510168915.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T19:21:55.833Z,1510168915.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:56.209Z,1510168916.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:56.225Z,1510168916.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2017-11-08T19:21:56.226Z,1510168916.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:56.609Z,1510168916.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:56.626Z,1510168916.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T19:21:56.627Z,1510168916.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:57.011Z,1510168917.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:57.027Z,1510168917.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T19:21:57.028Z,1510168917.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:57.408Z,1510168917.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:57.428Z,1510168917.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T19:21:57.429Z,1510168917.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:57.806Z,1510168917.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:57.822Z,1510168917.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2017-11-08T19:21:57.823Z,1510168917.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:58.214Z,1510168918.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:58.230Z,1510168918.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T19:21:58.231Z,1510168918.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:58.618Z,1510168918.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:58.633Z,1510168918.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T19:21:58.634Z,1510168918.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:59.016Z,1510168919.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:59.058Z,1510168919.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T19:21:59.059Z,1510168919.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:59.406Z,1510168919.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:59.430Z,1510168919.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T19:21:59.431Z,1510168919.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:21:59.813Z,1510168919.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:21:59.829Z,1510168919.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T19:21:59.830Z,1510168919.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:02.924Z,1510168922.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:02.940Z,1510168922.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2017-11-08T19:22:02.941Z,1510168922.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:03.075Z,1510168923.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:03.123Z,1510168923.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T19:22:03.124Z,1510168923.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:03.500Z,1510168923.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:03.516Z,1510168923.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T19:22:03.518Z,1510168923.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:03.904Z,1510168923.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:03.923Z,1510168923.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T19:22:03.924Z,1510168923.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:04.286Z,1510168924.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:04.310Z,1510168924.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T19:22:04.311Z,1510168924.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:04.679Z,1510168924.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:04.713Z,1510168924.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T19:22:04.714Z,1510168924.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:05.076Z,1510168925.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:05.091Z,1510168925.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-11-08T19:22:05.092Z,1510168925.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:05.475Z,1510168925.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:05.495Z,1510168925.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T19:22:05.496Z,1510168925.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:05.890Z,1510168925.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:05.922Z,1510168925.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T19:22:05.922Z,1510168925.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:06.292Z,1510168926.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:06.323Z,1510168926.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T19:22:06.324Z,1510168926.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:06.690Z,1510168926.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:06.724Z,1510168926.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T19:22:06.725Z,1510168926.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:07.080Z,1510168927.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:07.119Z,1510168927.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T19:22:07.120Z,1510168927.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:07.483Z,1510168927.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:07.499Z,1510168927.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T19:22:07.500Z,1510168927.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:07.894Z,1510168927.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:07.926Z,1510168927.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T19:22:07.927Z,1510168927.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:08.293Z,1510168928.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:08.309Z,1510168928.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T19:22:08.310Z,1510168928.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:08.693Z,1510168928.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:08.736Z,1510168928.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T19:22:08.745Z,1510168928.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:09.080Z,1510168929.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:09.115Z,1510168929.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T19:22:09.116Z,1510168929.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:09.483Z,1510168929.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:09.522Z,1510168929.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T19:22:09.523Z,1510168929.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:09.897Z,1510168929.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:09.932Z,1510168929.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:10.300Z,1510168930.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:10.317Z,1510168930.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:10.696Z,1510168930.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:10.740Z,1510168930.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:11.085Z,1510168931.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:11.115Z,1510168931.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:11.481Z,1510168931.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:11.531Z,1510168931.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:11.891Z,1510168931.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:11.927Z,1510168931.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:12.290Z,1510168932.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:12.340Z,1510168932.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:12.691Z,1510168932.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:12.721Z,1510168932.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:13.080Z,1510168933.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:13.112Z,1510168933.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:13.479Z,1510168933.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:13.495Z,1510168933.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:13.890Z,1510168933.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:13.926Z,1510168933.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:14.298Z,1510168934.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:14.325Z,1510168934.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:14.698Z,1510168934.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:14.724Z,1510168934.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:15.084Z,1510168935.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:15.104Z,1510168935.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:15.482Z,1510168935.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:15.498Z,1510168935.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:15.893Z,1510168935.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:15.932Z,1510168935.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:16.289Z,1510168936.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:16.331Z,1510168936.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:16.694Z,1510168936.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:16.730Z,1510168936.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:17.083Z,1510168937.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:17.103Z,1510168937.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:17.480Z,1510168937.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:17.496Z,1510168937.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:17.894Z,1510168937.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:17.910Z,1510168937.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:18.294Z,1510168938.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:18.332Z,1510168938.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:18.686Z,1510168938.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:18.703Z,1510168938.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:19.082Z,1510168939.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:19.110Z,1510168939.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:19.487Z,1510168939.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:19.504Z,1510168939.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:19.890Z,1510168939.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:19.906Z,1510168939.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:20.296Z,1510168940.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:20.330Z,1510168940.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:20.694Z,1510168940.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:20.753Z,1510168940.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:21.079Z,1510168941.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:21.109Z,1510168941.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:21.485Z,1510168941.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:21.501Z,1510168941.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:21.894Z,1510168941.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:21.910Z,1510168941.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:22.294Z,1510168942.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:22.310Z,1510168942.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:22.690Z,1510168942.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:22.712Z,1510168942.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:23.087Z,1510168943.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:23.108Z,1510168943.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:23.485Z,1510168943.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:23.501Z,1510168943.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:23.890Z,1510168943.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:23.912Z,1510168943.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:24.294Z,1510168944.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:24.310Z,1510168944.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:24.690Z,1510168944.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:24.712Z,1510168944.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:25.086Z,1510168945.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:25.103Z,1510168945.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:25.486Z,1510168945.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:25.502Z,1510168945.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:25.890Z,1510168945.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:25.951Z,1510168945.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:26.294Z,1510168946.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:26.316Z,1510168946.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:26.695Z,1510168946.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:26.716Z,1510168946.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:27.086Z,1510168947.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:27.102Z,1510168947.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:27.485Z,1510168947.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:27.502Z,1510168947.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:27.895Z,1510168947.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:27.916Z,1510168947.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:28.294Z,1510168948.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:28.316Z,1510168948.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:28.694Z,1510168948.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:28.716Z,1510168948.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:29.087Z,1510168949.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:29.103Z,1510168949.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:29.485Z,1510168949.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:29.501Z,1510168949.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:29.895Z,1510168949.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:29.916Z,1510168949.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:30.295Z,1510168950.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:30.316Z,1510168950.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:30.695Z,1510168950.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:30.712Z,1510168950.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:31.087Z,1510168951.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:31.103Z,1510168951.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:31.487Z,1510168951.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:31.503Z,1510168951.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:31.895Z,1510168951.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:31.912Z,1510168951.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:32.295Z,1510168952.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:32.370Z,1510168952.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:32.699Z,1510168952.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:32.716Z,1510168952.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:33.084Z,1510168953.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:33.146Z,1510168953.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:33.483Z,1510168953.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:33.512Z,1510168953.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:33.899Z,1510168953.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:33.956Z,1510168953.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:34.300Z,1510168954.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:34.316Z,1510168954.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:34.698Z,1510168954.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:34.714Z,1510168954.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:35.076Z,1510168955.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:35.104Z,1510168955.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:35.475Z,1510168955.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:35.512Z,1510168955.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:35.898Z,1510168955.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:35.914Z,1510168955.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:36.298Z,1510168956.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:36.314Z,1510168956.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:36.696Z,1510168956.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:36.719Z,1510168956.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:37.080Z,1510168957.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:37.115Z,1510168957.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:37.475Z,1510168957.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:37.503Z,1510168957.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:37.890Z,1510168957.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:37.916Z,1510168957.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:38.304Z,1510168958.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:38.328Z,1510168958.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:38.701Z,1510168958.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:38.718Z,1510168958.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:39.081Z,1510168959.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:39.115Z,1510168959.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:39.479Z,1510168959.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:39.514Z,1510168959.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:39.901Z,1510168959.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:39.917Z,1510168959.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:40.290Z,1510168960.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:40.322Z,1510168960.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:40.690Z,1510168960.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:40.722Z,1510168960.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:41.080Z,1510168961.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:41.115Z,1510168961.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:41.475Z,1510168961.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:41.512Z,1510168961.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:41.894Z,1510168961.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:41.926Z,1510168961.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:42.289Z,1510168962.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:42.357Z,1510168962.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:42.690Z,1510168962.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:42.717Z,1510168962.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:43.079Z,1510168963.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:43.120Z,1510168963.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:43.475Z,1510168963.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:43.491Z,1510168963.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:43.876Z,1510168963.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:43.893Z,1510168963.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:44.279Z,1510168964.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:44.300Z,1510168964.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:44.693Z,1510168964.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:44.726Z,1510168964.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:45.097Z,1510168965.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:45.124Z,1510168965.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:45.494Z,1510168965.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:45.526Z,1510168965.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:45.883Z,1510168965.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:45.899Z,1510168965.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:46.283Z,1510168966.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:46.304Z,1510168966.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:46.683Z,1510168966.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:46.704Z,1510168966.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:47.079Z,1510168967.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:47.095Z,1510168967.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:47.483Z,1510168967.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:47.499Z,1510168967.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:47.894Z,1510168967.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:47.926Z,1510168967.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:48.289Z,1510168968.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:48.305Z,1510168968.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:48.694Z,1510168968.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:48.793Z,1510168968.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:49.083Z,1510168969.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:49.104Z,1510168969.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:49.481Z,1510168969.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:49.501Z,1510168969.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:49.884Z,1510168969.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:49.900Z,1510168969.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:50.287Z,1510168970.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:50.308Z,1510168970.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:50.694Z,1510168970.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:50.736Z,1510168970.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:51.095Z,1510168971.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:51.111Z,1510168971.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:51.495Z,1510168971.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:51.511Z,1510168971.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:51.887Z,1510168971.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:51.903Z,1510168971.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:52.285Z,1510168972.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:52.302Z,1510168972.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:52.684Z,1510168972.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:52.702Z,1510168972.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:53.086Z,1510168973.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:53.102Z,1510168973.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:53.484Z,1510168973.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:53.508Z,1510168973.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:53.890Z,1510168973.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:53.907Z,1510168973.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:54.289Z,1510168974.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:54.344Z,1510168974.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:54.694Z,1510168974.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:54.759Z,1510168974.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:55.084Z,1510168975.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:55.101Z,1510168975.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:55.482Z,1510168975.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:55.498Z,1510168975.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:55.886Z,1510168975.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:55.946Z,1510168975.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:56.026Z,1510168976.026 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T19:22:56.283Z,1510168976.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:56.303Z,1510168976.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:56.695Z,1510168976.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:56.747Z,1510168976.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:57.094Z,1510168977.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:57.116Z,1510168977.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:57.494Z,1510168977.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:57.511Z,1510168977.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:57.882Z,1510168977.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:57.897Z,1510168977.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:58.285Z,1510168978.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:58.307Z,1510168978.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:58.683Z,1510168978.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:58.704Z,1510168978.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:59.083Z,1510168979.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:59.099Z,1510168979.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:59.489Z,1510168979.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:59.511Z,1510168979.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:59.515Z,1510168979.515 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T19:22:59.515Z,1510168979.515 [Default:CheckIn:C.Wait] Stopped
2017-11-08T19:22:59.515Z,1510168979.515 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T19:22:59.515Z,1510168979.515 [Default:CheckIn:D] Running Loop=1
2017-11-08T19:22:59.894Z,1510168979.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:22:59.917Z,1510168979.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:22:59.920Z,1510168979.920 [Default:CheckIn:D] Stopped
2017-11-08T19:22:59.920Z,1510168979.920 [Default:CheckIn:E] Running Loop=1
2017-11-08T19:23:02.979Z,1510168982.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:02.997Z,1510168982.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:03.000Z,1510168983.000 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 356.315658 min 
2017-11-08T19:23:03.001Z,1510168983.001 [Default:CheckIn:E] Stopped
2017-11-08T19:23:03.001Z,1510168983.001 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T19:23:03.001Z,1510168983.001 [Default:CheckIn] Stopped
2017-11-08T19:23:03.001Z,1510168983.001 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T19:23:03.001Z,1510168983.001 [Default:CheckIn](INFO): Running loop #23
2017-11-08T19:23:03.001Z,1510168983.001 [Default:CheckIn] Running Loop=23
2017-11-08T19:23:03.001Z,1510168983.001 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T19:23:03.001Z,1510168983.001 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T19:23:03.122Z,1510168983.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:03.149Z,1510168983.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:03.514Z,1510168983.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:03.530Z,1510168983.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:03.914Z,1510168983.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:03.930Z,1510168983.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:04.310Z,1510168984.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:04.327Z,1510168984.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:04.722Z,1510168984.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:04.778Z,1510168984.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:05.117Z,1510168985.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:05.133Z,1510168985.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:05.522Z,1510168985.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:05.554Z,1510168985.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:05.910Z,1510168985.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:05.926Z,1510168985.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:06.309Z,1510168986.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:06.325Z,1510168986.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:06.711Z,1510168986.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:06.732Z,1510168986.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:07.110Z,1510168987.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:07.126Z,1510168987.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:07.517Z,1510168987.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:07.533Z,1510168987.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:07.922Z,1510168987.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:07.938Z,1510168987.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:08.322Z,1510168988.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:08.338Z,1510168988.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:08.710Z,1510168988.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:08.726Z,1510168988.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:09.112Z,1510168989.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:09.136Z,1510168989.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:09.513Z,1510168989.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:09.529Z,1510168989.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:09.912Z,1510168989.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:09.927Z,1510168989.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:10.312Z,1510168990.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:10.329Z,1510168990.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:10.718Z,1510168990.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:10.734Z,1510168990.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:11.117Z,1510168991.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:11.139Z,1510168991.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:11.522Z,1510168991.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:11.538Z,1510168991.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:11.913Z,1510168991.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:11.929Z,1510168991.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:12.314Z,1510168992.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:12.330Z,1510168992.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:12.715Z,1510168992.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:12.736Z,1510168992.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:13.112Z,1510168993.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:13.129Z,1510168993.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:13.521Z,1510168993.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:13.538Z,1510168993.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:13.922Z,1510168993.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:13.939Z,1510168993.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:14.318Z,1510168994.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:14.335Z,1510168994.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:14.711Z,1510168994.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:14.727Z,1510168994.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:15.107Z,1510168995.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:15.136Z,1510168995.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:15.511Z,1510168995.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:15.539Z,1510168995.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:15.914Z,1510168995.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:15.931Z,1510168995.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:16.313Z,1510168996.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:16.332Z,1510168996.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:16.718Z,1510168996.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:16.783Z,1510168996.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:17.123Z,1510168997.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:17.191Z,1510168997.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:17.518Z,1510168997.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:17.539Z,1510168997.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:17.914Z,1510168997.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:17.972Z,1510168997.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:18.316Z,1510168998.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:18.332Z,1510168998.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:18.716Z,1510168998.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:18.772Z,1510168998.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:19.117Z,1510168999.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:19.146Z,1510168999.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:19.526Z,1510168999.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:19.543Z,1510168999.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:19.925Z,1510168999.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:19.941Z,1510168999.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:20.324Z,1510169000.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:20.413Z,1510169000.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:20.717Z,1510169000.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:20.733Z,1510169000.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:21.114Z,1510169001.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:21.131Z,1510169001.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:21.511Z,1510169001.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:21.532Z,1510169001.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:21.911Z,1510169001.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:21.927Z,1510169001.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:22.308Z,1510169002.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:22.337Z,1510169002.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:22.716Z,1510169002.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:22.741Z,1510169002.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:23.123Z,1510169003.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:23.139Z,1510169003.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:23.520Z,1510169003.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:23.537Z,1510169003.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:23.913Z,1510169003.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:23.936Z,1510169003.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:24.311Z,1510169004.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:24.327Z,1510169004.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:24.707Z,1510169004.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:24.729Z,1510169004.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:25.108Z,1510169005.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:25.138Z,1510169005.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:25.527Z,1510169005.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:25.543Z,1510169005.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:25.923Z,1510169005.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:25.940Z,1510169005.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:26.323Z,1510169006.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:26.340Z,1510169006.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:26.713Z,1510169006.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:26.729Z,1510169006.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:27.120Z,1510169007.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:27.180Z,1510169007.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:27.511Z,1510169007.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:27.540Z,1510169007.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:27.923Z,1510169007.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:27.939Z,1510169007.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:28.323Z,1510169008.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:28.340Z,1510169008.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:28.736Z,1510169008.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:28.760Z,1510169008.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:29.126Z,1510169009.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:29.167Z,1510169009.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:29.519Z,1510169009.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:29.574Z,1510169009.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:29.910Z,1510169009.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:29.948Z,1510169009.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:30.310Z,1510169010.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:30.342Z,1510169010.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:30.715Z,1510169010.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:30.744Z,1510169010.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:31.109Z,1510169011.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:31.144Z,1510169011.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:31.525Z,1510169011.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:31.542Z,1510169011.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:31.919Z,1510169011.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:31.956Z,1510169011.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:32.321Z,1510169012.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:32.359Z,1510169012.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:32.709Z,1510169012.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:32.725Z,1510169012.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:33.112Z,1510169013.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:33.152Z,1510169013.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:33.511Z,1510169013.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:33.548Z,1510169013.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:33.925Z,1510169013.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:33.943Z,1510169013.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:34.313Z,1510169014.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:34.330Z,1510169014.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:34.732Z,1510169014.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:34.752Z,1510169014.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:35.130Z,1510169015.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:35.154Z,1510169015.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:35.534Z,1510169015.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:35.563Z,1510169015.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:35.910Z,1510169015.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:35.960Z,1510169015.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:36.311Z,1510169016.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:36.344Z,1510169016.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:36.711Z,1510169016.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:36.757Z,1510169016.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:37.109Z,1510169017.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:37.128Z,1510169017.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:37.521Z,1510169017.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:37.557Z,1510169017.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:37.932Z,1510169017.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:37.962Z,1510169017.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:38.323Z,1510169018.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:38.387Z,1510169018.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:38.710Z,1510169018.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:38.742Z,1510169018.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:39.112Z,1510169019.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:39.247Z,1510169019.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:39.520Z,1510169019.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:39.538Z,1510169019.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:39.923Z,1510169019.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:39.947Z,1510169019.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:40.318Z,1510169020.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:40.382Z,1510169020.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:40.730Z,1510169020.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:40.752Z,1510169020.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:41.128Z,1510169021.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:41.182Z,1510169021.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:41.525Z,1510169021.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:41.543Z,1510169021.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:41.939Z,1510169021.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:41.997Z,1510169021.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:42.355Z,1510169022.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:42.404Z,1510169022.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:42.735Z,1510169022.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:42.755Z,1510169022.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:43.172Z,1510169023.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:43.275Z,1510169023.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:43.574Z,1510169023.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:43.661Z,1510169023.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:43.956Z,1510169023.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:44.045Z,1510169024.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:44.355Z,1510169024.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:44.478Z,1510169024.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:44.734Z,1510169024.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:44.855Z,1510169024.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:45.135Z,1510169025.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:45.232Z,1510169025.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:45.519Z,1510169025.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:45.543Z,1510169025.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:45.919Z,1510169025.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:45.973Z,1510169025.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:46.317Z,1510169026.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:46.334Z,1510169026.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:46.734Z,1510169026.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:46.755Z,1510169026.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:47.133Z,1510169027.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:47.153Z,1510169027.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:47.528Z,1510169027.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:47.547Z,1510169027.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:47.907Z,1510169027.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:47.932Z,1510169027.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:48.307Z,1510169028.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:48.333Z,1510169028.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:48.705Z,1510169028.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:48.740Z,1510169028.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:49.107Z,1510169029.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:49.133Z,1510169029.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:49.530Z,1510169029.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:49.590Z,1510169029.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:49.923Z,1510169029.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:49.944Z,1510169029.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:50.320Z,1510169030.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:50.339Z,1510169030.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:50.706Z,1510169030.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:50.736Z,1510169030.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:51.108Z,1510169031.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:51.135Z,1510169031.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:51.504Z,1510169031.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:51.532Z,1510169031.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:51.909Z,1510169031.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:51.943Z,1510169031.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:52.307Z,1510169032.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:52.348Z,1510169032.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:52.718Z,1510169032.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:52.746Z,1510169032.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:53.129Z,1510169033.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:53.145Z,1510169033.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:53.518Z,1510169033.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:53.549Z,1510169033.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:53.920Z,1510169033.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:53.955Z,1510169033.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:54.308Z,1510169034.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:54.344Z,1510169034.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:54.709Z,1510169034.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:54.745Z,1510169034.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:55.109Z,1510169035.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:55.148Z,1510169035.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:55.518Z,1510169035.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:55.555Z,1510169035.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:55.922Z,1510169035.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:55.958Z,1510169035.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:56.322Z,1510169036.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:56.355Z,1510169036.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:56.709Z,1510169036.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:56.727Z,1510169036.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:56.837Z,1510169036.837 [CBIT](IMPORTANT): Beginning ground fault scan
2017-11-08T19:23:57.112Z,1510169037.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:57.129Z,1510169037.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:57.512Z,1510169037.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:57.532Z,1510169037.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:57.916Z,1510169037.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:57.933Z,1510169037.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:58.309Z,1510169038.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:58.326Z,1510169038.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:58.725Z,1510169038.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:58.742Z,1510169038.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:59.129Z,1510169039.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:59.148Z,1510169039.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:59.530Z,1510169039.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:59.547Z,1510169039.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:23:59.917Z,1510169039.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:23:59.934Z,1510169039.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:03.334Z,1510169043.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:03.426Z,1510169043.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:03.628Z,1510169043.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:03.648Z,1510169043.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:04.040Z,1510169044.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:04.064Z,1510169044.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:04.439Z,1510169044.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:04.490Z,1510169044.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:04.839Z,1510169044.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:04.864Z,1510169044.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:05.231Z,1510169045.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:05.291Z,1510169045.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:05.631Z,1510169045.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:05.647Z,1510169045.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:06.023Z,1510169046.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:06.046Z,1510169046.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:06.441Z,1510169046.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:06.460Z,1510169046.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:06.839Z,1510169046.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:06.854Z,1510169046.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:07.236Z,1510169047.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:07.260Z,1510169047.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:07.619Z,1510169047.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:07.648Z,1510169047.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:08.030Z,1510169048.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:08.047Z,1510169048.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:08.417Z,1510169048.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:08.457Z,1510169048.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:08.821Z,1510169048.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:08.849Z,1510169048.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:09.215Z,1510169049.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:09.291Z,1510169049.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:09.638Z,1510169049.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:09.669Z,1510169049.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:10.034Z,1510169050.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:10.068Z,1510169050.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:10.429Z,1510169050.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:10.445Z,1510169050.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:10.577Z,1510169050.577 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): -0.004040
CHAN A1 (24V): -0.075767
CHAN A2 (12V): -0.000886
CHAN A3 (5V): -0.021556
CHAN B0 (3.3V): -0.000807
CHAN B1 (3.15aV): -0.000405
CHAN B2 (3.15bV): -0.000843
CHAN B3 (GND): -0.000369
OPEN: 0.002722
Full Scale Calc: 4.765 mA, -1.589 mA
2017-11-08T19:24:10.815Z,1510169050.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:10.848Z,1510169050.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:11.225Z,1510169051.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:11.257Z,1510169051.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:11.621Z,1510169051.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:11.650Z,1510169051.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:12.015Z,1510169052.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:12.073Z,1510169052.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:12.431Z,1510169052.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:12.465Z,1510169052.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:12.833Z,1510169052.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:12.858Z,1510169052.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:13.230Z,1510169053.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:13.258Z,1510169053.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:13.619Z,1510169053.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:13.675Z,1510169053.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:14.015Z,1510169054.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:14.035Z,1510169054.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:14.420Z,1510169054.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:14.436Z,1510169054.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:14.820Z,1510169054.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:14.860Z,1510169054.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:15.224Z,1510169055.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:15.239Z,1510169055.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:15.634Z,1510169055.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:15.651Z,1510169055.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:16.041Z,1510169056.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:16.072Z,1510169056.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:16.434Z,1510169056.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:16.449Z,1510169056.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:16.825Z,1510169056.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:16.841Z,1510169056.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:17.224Z,1510169057.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:17.244Z,1510169057.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:17.628Z,1510169057.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:17.669Z,1510169057.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:18.023Z,1510169058.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:18.048Z,1510169058.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:18.430Z,1510169058.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:18.450Z,1510169058.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:18.830Z,1510169058.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:18.846Z,1510169058.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:19.236Z,1510169059.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:19.252Z,1510169059.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:19.627Z,1510169059.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:19.644Z,1510169059.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:20.027Z,1510169060.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:20.048Z,1510169060.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:20.425Z,1510169060.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:20.448Z,1510169060.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:20.830Z,1510169060.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:20.847Z,1510169060.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:21.226Z,1510169061.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:21.255Z,1510169061.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:21.639Z,1510169061.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:21.664Z,1510169061.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:22.036Z,1510169062.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:22.053Z,1510169062.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:22.440Z,1510169062.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:22.457Z,1510169062.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:22.819Z,1510169062.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:22.876Z,1510169062.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:23.219Z,1510169063.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:23.245Z,1510169063.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:23.621Z,1510169063.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:23.646Z,1510169063.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:24.024Z,1510169064.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:24.049Z,1510169064.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:24.445Z,1510169064.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:24.541Z,1510169064.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:24.841Z,1510169064.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:24.857Z,1510169064.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:25.240Z,1510169065.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:25.256Z,1510169065.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:25.621Z,1510169065.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:25.700Z,1510169065.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:26.021Z,1510169066.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:26.091Z,1510169066.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:26.422Z,1510169066.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:26.455Z,1510169066.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:26.822Z,1510169066.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:26.887Z,1510169066.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:27.223Z,1510169067.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:27.239Z,1510169067.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:27.652Z,1510169067.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:27.706Z,1510169067.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:28.038Z,1510169068.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:28.062Z,1510169068.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:28.433Z,1510169068.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:28.470Z,1510169068.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:28.819Z,1510169068.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:28.860Z,1510169068.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:29.228Z,1510169069.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:29.266Z,1510169069.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:29.622Z,1510169069.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:29.638Z,1510169069.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:30.022Z,1510169070.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:30.039Z,1510169070.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:30.438Z,1510169070.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:30.471Z,1510169070.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:30.836Z,1510169070.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:30.852Z,1510169070.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:31.230Z,1510169071.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:31.246Z,1510169071.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:31.624Z,1510169071.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:31.641Z,1510169071.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:32.025Z,1510169072.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:32.047Z,1510169072.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:32.421Z,1510169072.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:32.437Z,1510169072.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:32.824Z,1510169072.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:32.841Z,1510169072.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:33.231Z,1510169073.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:33.246Z,1510169073.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:33.634Z,1510169073.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:33.650Z,1510169073.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:34.034Z,1510169074.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:34.056Z,1510169074.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:34.434Z,1510169074.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:34.449Z,1510169074.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:34.826Z,1510169074.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:34.842Z,1510169074.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:35.227Z,1510169075.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:35.248Z,1510169075.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:35.624Z,1510169075.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:35.643Z,1510169075.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:36.026Z,1510169076.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:36.083Z,1510169076.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:36.430Z,1510169076.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:36.447Z,1510169076.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:36.833Z,1510169076.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:36.849Z,1510169076.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:37.234Z,1510169077.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:37.250Z,1510169077.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:37.624Z,1510169077.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:37.641Z,1510169077.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:38.027Z,1510169078.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:38.043Z,1510169078.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:38.427Z,1510169078.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:38.444Z,1510169078.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:38.826Z,1510169078.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:38.842Z,1510169078.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:39.223Z,1510169079.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:39.239Z,1510169079.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:39.635Z,1510169079.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:39.656Z,1510169079.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:40.038Z,1510169080.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:40.055Z,1510169080.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:40.434Z,1510169080.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:40.483Z,1510169080.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:40.822Z,1510169080.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:40.842Z,1510169080.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:41.226Z,1510169081.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:41.242Z,1510169081.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:41.628Z,1510169081.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:41.644Z,1510169081.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:42.026Z,1510169082.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:42.043Z,1510169082.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:42.431Z,1510169082.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:42.447Z,1510169082.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:42.834Z,1510169082.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:42.850Z,1510169082.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:43.234Z,1510169083.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:43.256Z,1510169083.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:43.626Z,1510169083.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:43.647Z,1510169083.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:44.023Z,1510169084.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:44.043Z,1510169084.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:44.425Z,1510169084.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:44.442Z,1510169084.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:44.829Z,1510169084.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:44.851Z,1510169084.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:45.227Z,1510169085.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:45.243Z,1510169085.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:45.634Z,1510169085.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:45.652Z,1510169085.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:46.033Z,1510169086.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:46.050Z,1510169086.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:46.434Z,1510169086.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:46.450Z,1510169086.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:46.826Z,1510169086.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:46.842Z,1510169086.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:47.218Z,1510169087.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:47.249Z,1510169087.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:47.620Z,1510169087.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:47.646Z,1510169087.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:48.019Z,1510169088.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:48.071Z,1510169088.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:48.426Z,1510169088.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:48.491Z,1510169088.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:48.836Z,1510169088.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:48.854Z,1510169088.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:49.234Z,1510169089.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:49.255Z,1510169089.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:49.625Z,1510169089.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:49.672Z,1510169089.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:50.015Z,1510169090.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:50.050Z,1510169090.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:50.420Z,1510169090.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:50.494Z,1510169090.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:50.820Z,1510169090.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:50.850Z,1510169090.850 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:50.850Z,1510169090.850 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 120
2017-11-08T19:24:50.850Z,1510169090.850 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T19:24:50.852Z,1510169090.852 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:50.852Z,1510169090.852 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 120
2017-11-08T19:24:50.852Z,1510169090.852 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T19:24:50.854Z,1510169090.854 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:50.854Z,1510169090.854 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 120
2017-11-08T19:24:50.854Z,1510169090.854 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T19:24:50.953Z,1510169090.953 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T19:24:50.953Z,1510169090.953 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T19:24:50.953Z,1510169090.953 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T19:24:51.220Z,1510169091.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:51.337Z,1510169091.337 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T19:24:51.337Z,1510169091.337 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 120
2017-11-08T19:24:51.337Z,1510169091.337 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T19:24:51.338Z,1510169091.338 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 120
2017-11-08T19:24:51.338Z,1510169091.338 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T19:24:51.338Z,1510169091.338 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 120
2017-11-08T19:24:51.634Z,1510169091.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:51.649Z,1510169091.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T19:24:51.649Z,1510169091.649 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:24:51.650Z,1510169091.650 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:24:51.650Z,1510169091.650 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T19:24:51.651Z,1510169091.651 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:24:51.651Z,1510169091.651 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:24:51.651Z,1510169091.651 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T19:24:51.652Z,1510169091.652 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:24:51.652Z,1510169091.652 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:24:52.035Z,1510169092.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:52.055Z,1510169092.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T19:24:52.056Z,1510169092.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:52.436Z,1510169092.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:52.459Z,1510169092.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T19:24:52.460Z,1510169092.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:52.829Z,1510169092.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:52.845Z,1510169092.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T19:24:52.846Z,1510169092.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:53.226Z,1510169093.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:53.241Z,1510169093.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T19:24:53.242Z,1510169093.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:53.628Z,1510169093.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:53.643Z,1510169093.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T19:24:53.644Z,1510169093.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:54.015Z,1510169094.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:54.046Z,1510169094.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T19:24:54.047Z,1510169094.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:54.439Z,1510169094.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:54.455Z,1510169094.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T19:24:54.456Z,1510169094.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:54.839Z,1510169094.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:54.855Z,1510169094.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T19:24:54.856Z,1510169094.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:55.236Z,1510169095.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:55.258Z,1510169095.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T19:24:55.259Z,1510169095.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:55.631Z,1510169095.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:55.646Z,1510169095.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T19:24:55.647Z,1510169095.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:56.045Z,1510169096.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:56.062Z,1510169096.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T19:24:56.063Z,1510169096.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:56.424Z,1510169096.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:56.465Z,1510169096.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T19:24:56.466Z,1510169096.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:56.820Z,1510169096.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:56.845Z,1510169096.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T19:24:56.846Z,1510169096.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:57.220Z,1510169097.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:57.251Z,1510169097.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T19:24:57.252Z,1510169097.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:57.641Z,1510169097.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:57.657Z,1510169097.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T19:24:57.658Z,1510169097.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:58.036Z,1510169098.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:58.052Z,1510169098.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T19:24:58.053Z,1510169098.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:58.441Z,1510169098.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:58.463Z,1510169098.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T19:24:58.464Z,1510169098.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:58.816Z,1510169098.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:58.866Z,1510169098.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T19:24:58.867Z,1510169098.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:59.223Z,1510169099.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:59.265Z,1510169099.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T19:24:59.266Z,1510169099.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:24:59.625Z,1510169099.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:24:59.651Z,1510169099.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T19:24:59.652Z,1510169099.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:00.019Z,1510169100.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:00.055Z,1510169100.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T19:25:00.056Z,1510169100.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:00.429Z,1510169100.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:00.456Z,1510169100.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T19:25:00.457Z,1510169100.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:00.849Z,1510169100.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:00.865Z,1510169100.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T19:25:00.866Z,1510169100.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:01.247Z,1510169101.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:01.267Z,1510169101.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T19:25:01.268Z,1510169101.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:04.372Z,1510169104.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:04.408Z,1510169104.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T19:25:04.409Z,1510169104.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:04.521Z,1510169104.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:04.545Z,1510169104.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T19:25:04.546Z,1510169104.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:04.932Z,1510169104.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:04.955Z,1510169104.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-08T19:25:04.977Z,1510169104.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:05.334Z,1510169105.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:05.350Z,1510169105.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-08T19:25:05.351Z,1510169105.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:05.731Z,1510169105.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:05.751Z,1510169105.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-08T19:25:05.752Z,1510169105.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:06.121Z,1510169106.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:06.143Z,1510169106.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T19:25:06.144Z,1510169106.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:06.522Z,1510169106.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:06.539Z,1510169106.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-08T19:25:06.540Z,1510169106.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:06.923Z,1510169106.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:06.940Z,1510169106.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-08T19:25:06.941Z,1510169106.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:07.319Z,1510169107.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:07.365Z,1510169107.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-08T19:25:07.366Z,1510169107.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:07.734Z,1510169107.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:07.751Z,1510169107.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2017-11-08T19:25:07.752Z,1510169107.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:08.135Z,1510169108.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:08.152Z,1510169108.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-08T19:25:08.153Z,1510169108.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:08.534Z,1510169108.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:08.552Z,1510169108.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-08T19:25:08.553Z,1510169108.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:08.918Z,1510169108.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:08.949Z,1510169108.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-08T19:25:08.950Z,1510169108.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:09.318Z,1510169109.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:09.343Z,1510169109.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-08T19:25:09.344Z,1510169109.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:09.716Z,1510169109.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:09.742Z,1510169109.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-08T19:25:09.743Z,1510169109.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:10.116Z,1510169110.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:10.151Z,1510169110.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-08T19:25:10.152Z,1510169110.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:10.543Z,1510169110.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:10.560Z,1510169110.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-08T19:25:10.581Z,1510169110.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:10.936Z,1510169110.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:10.953Z,1510169110.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:11.333Z,1510169111.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:11.434Z,1510169111.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:11.716Z,1510169111.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:11.748Z,1510169111.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:12.118Z,1510169112.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:12.167Z,1510169112.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:12.515Z,1510169112.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:12.556Z,1510169112.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:12.930Z,1510169112.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:12.995Z,1510169112.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:13.323Z,1510169113.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:13.368Z,1510169113.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:13.738Z,1510169113.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:13.772Z,1510169113.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:14.134Z,1510169114.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:14.164Z,1510169114.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:14.530Z,1510169114.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:14.564Z,1510169114.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:14.915Z,1510169114.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:14.932Z,1510169114.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:15.319Z,1510169115.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:15.336Z,1510169115.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:15.726Z,1510169115.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:15.743Z,1510169115.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:16.121Z,1510169116.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:16.139Z,1510169116.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:16.534Z,1510169116.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:16.568Z,1510169116.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:16.930Z,1510169116.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:16.967Z,1510169116.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:17.330Z,1510169117.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:17.346Z,1510169117.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:17.721Z,1510169117.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:17.738Z,1510169117.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:18.115Z,1510169118.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:18.137Z,1510169118.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:18.520Z,1510169118.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:18.545Z,1510169118.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:18.921Z,1510169118.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:18.938Z,1510169118.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:19.320Z,1510169119.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:19.337Z,1510169119.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:19.724Z,1510169119.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:19.741Z,1510169119.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:20.130Z,1510169120.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:20.168Z,1510169120.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:20.526Z,1510169120.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:20.542Z,1510169120.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:20.922Z,1510169120.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:20.938Z,1510169120.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:21.323Z,1510169121.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:21.376Z,1510169121.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:21.725Z,1510169121.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:21.742Z,1510169121.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:22.120Z,1510169122.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:22.136Z,1510169122.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:22.526Z,1510169122.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:22.543Z,1510169122.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:22.930Z,1510169122.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:22.946Z,1510169122.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:23.330Z,1510169123.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:23.346Z,1510169123.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:23.714Z,1510169123.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:23.749Z,1510169123.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:24.120Z,1510169124.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:24.140Z,1510169124.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:24.515Z,1510169124.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:24.548Z,1510169124.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:24.917Z,1510169124.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:24.940Z,1510169124.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:25.320Z,1510169125.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:25.339Z,1510169125.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:25.729Z,1510169125.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:25.746Z,1510169125.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:26.130Z,1510169126.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:26.175Z,1510169126.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:26.526Z,1510169126.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:26.542Z,1510169126.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:26.918Z,1510169126.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:26.939Z,1510169126.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:27.311Z,1510169127.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:27.332Z,1510169127.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:27.717Z,1510169127.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:27.733Z,1510169127.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:28.119Z,1510169128.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:28.135Z,1510169128.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:28.530Z,1510169128.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:28.562Z,1510169128.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:28.934Z,1510169128.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:28.959Z,1510169128.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:29.334Z,1510169129.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:29.363Z,1510169129.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:29.715Z,1510169129.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:29.733Z,1510169129.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:30.119Z,1510169130.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:30.136Z,1510169130.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:30.518Z,1510169130.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:30.535Z,1510169130.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:30.919Z,1510169130.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:30.940Z,1510169130.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:31.318Z,1510169131.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:31.335Z,1510169131.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:31.725Z,1510169131.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:31.742Z,1510169131.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:32.126Z,1510169132.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:32.134Z,1510169132.134 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T19:25:32.134Z,1510169132.134 [BPC1] Data Fault, FailCount= 1
2017-11-08T19:25:32.134Z,1510169132.134 [BPC1](ERROR): Data Fault
2017-11-08T19:25:32.144Z,1510169132.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:32.245Z,1510169132.245 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T19:25:32.530Z,1510169132.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:32.572Z,1510169132.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:32.918Z,1510169132.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:32.934Z,1510169132.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:33.318Z,1510169133.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:33.334Z,1510169133.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:33.409Z,1510169133.409 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T19:25:33.409Z,1510169133.409 [BPC1] No Fault, FailCount= 1
2017-11-08T19:25:33.719Z,1510169133.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:33.781Z,1510169133.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:34.117Z,1510169134.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:34.133Z,1510169134.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:34.530Z,1510169134.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:34.571Z,1510169134.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:34.929Z,1510169134.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:34.971Z,1510169134.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:35.328Z,1510169135.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:35.372Z,1510169135.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:35.717Z,1510169135.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:35.733Z,1510169135.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:36.118Z,1510169136.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:36.134Z,1510169136.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:36.517Z,1510169136.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:36.533Z,1510169136.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:36.917Z,1510169136.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:36.937Z,1510169136.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:37.318Z,1510169137.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:37.335Z,1510169137.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:37.729Z,1510169137.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:37.745Z,1510169137.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:38.130Z,1510169138.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:38.168Z,1510169138.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:38.526Z,1510169138.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:38.542Z,1510169138.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:38.918Z,1510169138.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:38.934Z,1510169138.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:39.314Z,1510169139.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:39.343Z,1510169139.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:39.721Z,1510169139.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:39.738Z,1510169139.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:40.121Z,1510169140.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:40.137Z,1510169140.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:40.523Z,1510169140.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:40.540Z,1510169140.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:40.938Z,1510169140.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:40.972Z,1510169140.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:41.329Z,1510169141.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:41.345Z,1510169141.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:41.714Z,1510169141.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:41.743Z,1510169141.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:42.123Z,1510169142.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:42.176Z,1510169142.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:42.522Z,1510169142.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:42.538Z,1510169142.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:42.922Z,1510169142.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:42.940Z,1510169142.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:43.321Z,1510169143.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:43.337Z,1510169143.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:43.726Z,1510169143.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:43.748Z,1510169143.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:44.127Z,1510169144.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:44.143Z,1510169144.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:44.526Z,1510169144.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:44.543Z,1510169144.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:44.921Z,1510169144.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:44.938Z,1510169144.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:45.316Z,1510169145.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:45.333Z,1510169145.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:45.720Z,1510169145.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:45.741Z,1510169145.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:46.118Z,1510169146.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:46.134Z,1510169146.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:46.522Z,1510169146.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:46.540Z,1510169146.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:46.929Z,1510169146.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:46.948Z,1510169146.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:47.331Z,1510169147.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:47.382Z,1510169147.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:47.732Z,1510169147.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:47.749Z,1510169147.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:48.123Z,1510169148.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:48.139Z,1510169148.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:48.525Z,1510169148.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:48.549Z,1510169148.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:48.914Z,1510169148.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:48.952Z,1510169148.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:49.335Z,1510169149.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:49.364Z,1510169149.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:49.736Z,1510169149.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:49.752Z,1510169149.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:50.134Z,1510169150.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:50.151Z,1510169150.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:50.530Z,1510169150.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:50.559Z,1510169150.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:50.911Z,1510169150.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:50.953Z,1510169150.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:51.320Z,1510169151.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:51.350Z,1510169151.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:51.716Z,1510169151.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:51.751Z,1510169151.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:52.115Z,1510169152.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:52.153Z,1510169152.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:52.536Z,1510169152.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:52.553Z,1510169152.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:52.936Z,1510169152.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:52.953Z,1510169152.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:53.324Z,1510169153.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:53.342Z,1510169153.342 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-08T19:25:53.342Z,1510169153.342 [BPC1] Data Fault, FailCount= 2
2017-11-08T19:25:53.342Z,1510169153.342 [BPC1](ERROR): Data Fault
2017-11-08T19:25:53.355Z,1510169153.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:53.445Z,1510169153.445 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-08T19:25:53.711Z,1510169153.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:53.750Z,1510169153.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:54.115Z,1510169154.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:54.150Z,1510169154.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:54.516Z,1510169154.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:54.551Z,1510169154.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:54.637Z,1510169154.637 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T19:25:54.637Z,1510169154.637 [BPC1] No Fault, FailCount= 2
2017-11-08T19:25:54.911Z,1510169154.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:54.995Z,1510169154.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:55.326Z,1510169155.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:55.358Z,1510169155.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:55.725Z,1510169155.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:55.750Z,1510169155.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:56.126Z,1510169156.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:56.156Z,1510169156.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:56.515Z,1510169156.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:56.550Z,1510169156.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:56.916Z,1510169156.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:56.951Z,1510169156.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:57.311Z,1510169157.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:57.352Z,1510169157.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:57.726Z,1510169157.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:57.752Z,1510169157.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:58.098Z,1510169158.098 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-08T19:25:58.098Z,1510169158.098 [NAL9602] Data Fault, FailCount= 4
2017-11-08T19:25:58.098Z,1510169158.098 [NAL9602](ERROR): Data Fault
2017-11-08T19:25:58.115Z,1510169158.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:58.131Z,1510169158.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:58.241Z,1510169158.241 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-08T19:25:58.494Z,1510169158.494 [NAL9602](INFO): Powering down
2017-11-08T19:25:58.511Z,1510169158.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:58.532Z,1510169158.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:58.918Z,1510169158.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:58.940Z,1510169158.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:59.314Z,1510169159.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:59.329Z,1510169159.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:25:59.408Z,1510169159.408 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-08T19:25:59.408Z,1510169159.408 [NAL9602] No Fault, FailCount= 4
2017-11-08T19:25:59.715Z,1510169159.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:25:59.731Z,1510169159.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:00.120Z,1510169160.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:00.141Z,1510169160.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:03.311Z,1510169163.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:03.364Z,1510169163.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:03.479Z,1510169163.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:03.523Z,1510169163.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:03.885Z,1510169163.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:03.919Z,1510169163.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:04.286Z,1510169164.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:04.310Z,1510169164.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:04.687Z,1510169164.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:04.712Z,1510169164.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:05.083Z,1510169165.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:05.115Z,1510169165.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:05.483Z,1510169165.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:05.513Z,1510169165.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:05.879Z,1510169165.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:05.903Z,1510169165.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:06.287Z,1510169166.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:06.322Z,1510169166.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:06.679Z,1510169166.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:06.694Z,1510169166.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:07.079Z,1510169167.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:07.095Z,1510169167.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:07.485Z,1510169167.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:07.517Z,1510169167.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:07.883Z,1510169167.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:07.899Z,1510169167.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:08.283Z,1510169168.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:08.299Z,1510169168.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:08.684Z,1510169168.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:08.700Z,1510169168.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:09.082Z,1510169169.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:09.103Z,1510169169.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:09.486Z,1510169169.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:09.502Z,1510169169.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:09.884Z,1510169169.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:09.916Z,1510169169.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:10.286Z,1510169170.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:10.302Z,1510169170.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:10.682Z,1510169170.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:10.698Z,1510169170.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:11.086Z,1510169171.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:11.102Z,1510169171.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:11.483Z,1510169171.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:11.498Z,1510169171.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:11.887Z,1510169171.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:11.903Z,1510169171.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:12.294Z,1510169172.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:12.311Z,1510169172.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:12.685Z,1510169172.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:12.706Z,1510169172.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:13.090Z,1510169173.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:13.107Z,1510169173.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:13.490Z,1510169173.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:13.511Z,1510169173.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:13.889Z,1510169173.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:13.905Z,1510169173.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:14.292Z,1510169174.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:14.309Z,1510169174.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:14.699Z,1510169174.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:14.720Z,1510169174.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:15.085Z,1510169175.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:15.108Z,1510169175.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:15.490Z,1510169175.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:15.566Z,1510169175.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:15.882Z,1510169175.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:15.945Z,1510169175.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:16.289Z,1510169176.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:16.305Z,1510169176.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:16.691Z,1510169176.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:16.710Z,1510169176.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:17.083Z,1510169177.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:17.142Z,1510169177.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:17.501Z,1510169177.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:17.521Z,1510169177.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:17.879Z,1510169177.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:17.932Z,1510169177.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:18.283Z,1510169178.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:18.327Z,1510169178.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:18.683Z,1510169178.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:18.708Z,1510169178.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:19.095Z,1510169179.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:19.111Z,1510169179.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:19.483Z,1510169179.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:19.509Z,1510169179.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:19.895Z,1510169179.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:19.912Z,1510169179.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:20.282Z,1510169180.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:20.329Z,1510169180.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:20.683Z,1510169180.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:20.717Z,1510169180.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:21.079Z,1510169181.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:21.111Z,1510169181.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:21.506Z,1510169181.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:21.523Z,1510169181.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:21.882Z,1510169181.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:21.915Z,1510169181.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:22.283Z,1510169182.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:22.314Z,1510169182.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:22.679Z,1510169182.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:22.703Z,1510169182.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:23.093Z,1510169183.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:23.117Z,1510169183.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:23.485Z,1510169183.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:23.507Z,1510169183.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:23.886Z,1510169183.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:23.909Z,1510169183.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:24.289Z,1510169184.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:24.305Z,1510169184.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:24.690Z,1510169184.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:24.706Z,1510169184.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:25.079Z,1510169185.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:25.115Z,1510169185.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:25.489Z,1510169185.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:25.511Z,1510169185.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:25.879Z,1510169185.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:25.903Z,1510169185.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:26.288Z,1510169186.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:26.352Z,1510169186.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:26.689Z,1510169186.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:26.706Z,1510169186.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:27.079Z,1510169187.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:27.107Z,1510169187.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:27.488Z,1510169187.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:27.505Z,1510169187.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:27.886Z,1510169187.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:27.912Z,1510169187.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:28.279Z,1510169188.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:28.303Z,1510169188.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:28.662Z,1510169188.662 [NAL9602](INFO): Powering up NAL9602
2017-11-08T19:26:28.680Z,1510169188.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:28.709Z,1510169188.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:29.088Z,1510169189.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:29.104Z,1510169189.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:29.495Z,1510169189.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:29.511Z,1510169189.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:29.879Z,1510169189.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:29.916Z,1510169189.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:30.282Z,1510169190.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:30.323Z,1510169190.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:30.679Z,1510169190.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:30.694Z,1510169190.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:31.108Z,1510169191.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:31.124Z,1510169191.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:31.488Z,1510169191.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:31.506Z,1510169191.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:31.883Z,1510169191.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:31.899Z,1510169191.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:32.289Z,1510169192.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:32.307Z,1510169192.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:32.688Z,1510169192.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:32.705Z,1510169192.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:33.089Z,1510169193.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:33.105Z,1510169193.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:33.489Z,1510169193.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:33.506Z,1510169193.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:33.888Z,1510169193.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:33.904Z,1510169193.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:34.285Z,1510169194.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:34.304Z,1510169194.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:34.688Z,1510169194.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:34.705Z,1510169194.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:35.086Z,1510169195.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:35.115Z,1510169195.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:35.489Z,1510169195.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:35.505Z,1510169195.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:35.891Z,1510169195.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:35.907Z,1510169195.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:36.289Z,1510169196.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:36.306Z,1510169196.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:36.689Z,1510169196.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:36.707Z,1510169196.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:37.101Z,1510169197.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:37.120Z,1510169197.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:37.488Z,1510169197.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:37.505Z,1510169197.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:37.889Z,1510169197.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:37.907Z,1510169197.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:38.288Z,1510169198.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:38.360Z,1510169198.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:38.679Z,1510169198.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:38.712Z,1510169198.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:39.091Z,1510169199.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:39.155Z,1510169199.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:39.501Z,1510169199.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:39.521Z,1510169199.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:39.867Z,1510169199.867 [NAL9602](INFO): NAL9602 initialized
2017-11-08T19:26:39.884Z,1510169199.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:39.949Z,1510169199.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:40.284Z,1510169200.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:40.320Z,1510169200.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:40.699Z,1510169200.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:40.715Z,1510169200.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:41.104Z,1510169201.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:41.121Z,1510169201.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:41.484Z,1510169201.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:41.514Z,1510169201.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:41.879Z,1510169201.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:41.910Z,1510169201.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:42.304Z,1510169202.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:42.322Z,1510169202.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:42.703Z,1510169202.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:42.719Z,1510169202.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:43.105Z,1510169203.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:43.130Z,1510169203.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:43.489Z,1510169203.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:43.507Z,1510169203.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:43.887Z,1510169203.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:43.905Z,1510169203.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:44.293Z,1510169204.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:44.310Z,1510169204.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:44.697Z,1510169204.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:44.738Z,1510169204.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:45.098Z,1510169205.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:45.139Z,1510169205.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:45.487Z,1510169205.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:45.508Z,1510169205.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:45.886Z,1510169205.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:45.902Z,1510169205.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:46.298Z,1510169206.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:46.336Z,1510169206.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:46.694Z,1510169206.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:46.710Z,1510169206.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:47.094Z,1510169207.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:47.110Z,1510169207.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:47.491Z,1510169207.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:47.508Z,1510169207.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:47.889Z,1510169207.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:47.908Z,1510169207.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:48.295Z,1510169208.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:48.368Z,1510169208.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:48.710Z,1510169208.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:48.746Z,1510169208.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:49.104Z,1510169209.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:49.130Z,1510169209.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:49.501Z,1510169209.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:49.530Z,1510169209.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:49.887Z,1510169209.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:49.920Z,1510169209.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:50.309Z,1510169210.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:50.342Z,1510169210.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:50.710Z,1510169210.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:50.733Z,1510169210.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:51.112Z,1510169211.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:51.133Z,1510169211.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:51.496Z,1510169211.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:51.537Z,1510169211.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:51.894Z,1510169211.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:51.933Z,1510169211.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:52.307Z,1510169212.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:52.347Z,1510169212.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:52.702Z,1510169212.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:52.726Z,1510169212.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:53.090Z,1510169213.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:53.107Z,1510169213.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:53.488Z,1510169213.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:53.505Z,1510169213.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:53.888Z,1510169213.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:53.905Z,1510169213.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:54.310Z,1510169214.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:54.337Z,1510169214.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:54.711Z,1510169214.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:54.743Z,1510169214.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:55.098Z,1510169215.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:55.134Z,1510169215.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:55.501Z,1510169215.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:55.519Z,1510169215.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:55.892Z,1510169215.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:55.922Z,1510169215.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:56.305Z,1510169216.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:56.325Z,1510169216.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:56.703Z,1510169216.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:56.720Z,1510169216.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:57.105Z,1510169217.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:57.123Z,1510169217.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:57.491Z,1510169217.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:57.517Z,1510169217.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:57.894Z,1510169217.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:57.921Z,1510169217.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:58.310Z,1510169218.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:58.332Z,1510169218.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:58.722Z,1510169218.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:58.804Z,1510169218.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:59.109Z,1510169219.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:59.140Z,1510169219.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:59.489Z,1510169219.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:59.521Z,1510169219.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:26:59.887Z,1510169219.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:26:59.930Z,1510169219.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:00.305Z,1510169220.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:00.403Z,1510169220.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:00.704Z,1510169220.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:00.738Z,1510169220.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:01.100Z,1510169221.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:01.153Z,1510169221.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:01.494Z,1510169221.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:01.514Z,1510169221.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:05.940Z,1510169225.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:05.993Z,1510169225.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:06.135Z,1510169226.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:06.182Z,1510169226.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:06.544Z,1510169226.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:06.569Z,1510169226.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:06.934Z,1510169226.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:06.967Z,1510169226.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:07.322Z,1510169227.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:07.338Z,1510169227.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:07.730Z,1510169227.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:07.747Z,1510169227.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:08.132Z,1510169228.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:08.181Z,1510169228.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:08.535Z,1510169228.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:08.560Z,1510169228.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:08.937Z,1510169228.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:08.953Z,1510169228.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:09.341Z,1510169229.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:09.357Z,1510169229.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:09.728Z,1510169229.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:09.752Z,1510169229.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:10.121Z,1510169230.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:10.162Z,1510169230.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:10.521Z,1510169230.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:10.553Z,1510169230.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:10.919Z,1510169230.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:10.949Z,1510169230.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:11.336Z,1510169231.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:11.353Z,1510169231.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:11.737Z,1510169231.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:11.753Z,1510169231.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:12.136Z,1510169232.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:12.152Z,1510169232.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:12.519Z,1510169232.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:12.550Z,1510169232.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:12.919Z,1510169232.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:13.024Z,1510169233.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:13.323Z,1510169233.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:13.343Z,1510169233.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:13.724Z,1510169233.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:13.740Z,1510169233.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:14.119Z,1510169234.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:14.176Z,1510169234.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:14.534Z,1510169234.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:14.566Z,1510169234.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:14.937Z,1510169234.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:14.970Z,1510169234.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:15.334Z,1510169235.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:15.350Z,1510169235.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:15.722Z,1510169235.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:15.738Z,1510169235.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:16.125Z,1510169236.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:16.141Z,1510169236.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:16.523Z,1510169236.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:16.539Z,1510169236.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:16.921Z,1510169236.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:16.938Z,1510169236.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:17.330Z,1510169237.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:17.347Z,1510169237.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:17.729Z,1510169237.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:17.746Z,1510169237.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:18.130Z,1510169238.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:18.147Z,1510169238.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:18.525Z,1510169238.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:18.542Z,1510169238.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:18.925Z,1510169238.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:18.941Z,1510169238.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:19.321Z,1510169239.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:19.337Z,1510169239.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:19.724Z,1510169239.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:19.744Z,1510169239.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:20.122Z,1510169240.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:20.143Z,1510169240.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:20.530Z,1510169240.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:20.546Z,1510169240.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:20.935Z,1510169240.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:20.977Z,1510169240.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:21.337Z,1510169241.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:21.359Z,1510169241.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:21.733Z,1510169241.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:21.749Z,1510169241.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:22.115Z,1510169242.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:22.146Z,1510169242.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:22.520Z,1510169242.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:22.546Z,1510169242.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:22.932Z,1510169242.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:22.949Z,1510169242.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:23.337Z,1510169243.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:23.358Z,1510169243.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:23.743Z,1510169243.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:23.763Z,1510169243.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:24.134Z,1510169244.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:24.156Z,1510169244.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:24.519Z,1510169244.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:24.559Z,1510169244.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:24.920Z,1510169244.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:24.946Z,1510169244.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:25.315Z,1510169245.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:25.347Z,1510169245.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:25.733Z,1510169245.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:25.758Z,1510169245.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:26.119Z,1510169246.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:26.240Z,1510169246.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:26.538Z,1510169246.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:26.563Z,1510169246.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:26.940Z,1510169246.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:27.008Z,1510169247.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:27.340Z,1510169247.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:27.356Z,1510169247.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:27.715Z,1510169247.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:27.771Z,1510169247.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:28.119Z,1510169248.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:28.153Z,1510169248.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:28.520Z,1510169248.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:28.556Z,1510169248.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:28.915Z,1510169248.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:28.952Z,1510169248.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:29.345Z,1510169249.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:29.362Z,1510169249.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:29.743Z,1510169249.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:29.759Z,1510169249.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:30.134Z,1510169250.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:30.164Z,1510169250.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:30.520Z,1510169250.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:30.536Z,1510169250.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:30.922Z,1510169250.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:30.978Z,1510169250.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:31.319Z,1510169251.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:31.339Z,1510169251.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:31.725Z,1510169251.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:31.742Z,1510169251.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:32.124Z,1510169252.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:32.139Z,1510169252.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:32.534Z,1510169252.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:32.550Z,1510169252.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:32.936Z,1510169252.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:32.952Z,1510169252.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:33.341Z,1510169253.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:33.357Z,1510169253.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:33.729Z,1510169253.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:33.756Z,1510169253.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:34.121Z,1510169254.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:34.151Z,1510169254.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:34.521Z,1510169254.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:34.555Z,1510169254.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:34.920Z,1510169254.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:34.950Z,1510169254.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:35.337Z,1510169255.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:35.359Z,1510169255.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:35.737Z,1510169255.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:35.753Z,1510169255.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:36.141Z,1510169256.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:36.199Z,1510169256.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:36.519Z,1510169256.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:36.555Z,1510169256.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:36.915Z,1510169256.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:36.959Z,1510169256.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:37.323Z,1510169257.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:37.356Z,1510169257.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:37.720Z,1510169257.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:37.754Z,1510169257.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:38.119Z,1510169258.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:38.149Z,1510169258.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:38.540Z,1510169258.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:38.556Z,1510169258.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:38.940Z,1510169258.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:38.956Z,1510169258.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:39.341Z,1510169259.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:39.356Z,1510169259.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:39.719Z,1510169259.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:39.750Z,1510169259.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:40.148Z,1510169260.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:40.175Z,1510169260.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:40.520Z,1510169260.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:40.536Z,1510169260.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:40.926Z,1510169260.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:40.966Z,1510169260.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:41.330Z,1510169261.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:41.355Z,1510169261.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:41.733Z,1510169261.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:41.763Z,1510169261.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:42.134Z,1510169262.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:42.175Z,1510169262.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:42.519Z,1510169262.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:42.552Z,1510169262.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:42.926Z,1510169262.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:42.980Z,1510169262.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:43.322Z,1510169263.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:43.339Z,1510169263.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:43.723Z,1510169263.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:43.740Z,1510169263.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:44.126Z,1510169264.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:44.175Z,1510169264.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:44.536Z,1510169264.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:44.560Z,1510169264.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:44.938Z,1510169264.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:44.978Z,1510169264.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:45.343Z,1510169265.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:45.366Z,1510169265.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:45.739Z,1510169265.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:45.758Z,1510169265.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:46.131Z,1510169266.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:46.148Z,1510169266.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:46.533Z,1510169266.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:46.549Z,1510169266.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:46.927Z,1510169266.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:46.948Z,1510169266.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:47.340Z,1510169267.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:47.357Z,1510169267.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:47.739Z,1510169267.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:47.764Z,1510169267.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:48.139Z,1510169268.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:48.223Z,1510169268.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:48.524Z,1510169268.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:48.556Z,1510169268.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:48.915Z,1510169268.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:48.956Z,1510169268.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:49.319Z,1510169269.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:49.344Z,1510169269.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:49.724Z,1510169269.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:49.787Z,1510169269.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:50.115Z,1510169270.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:50.151Z,1510169270.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:50.539Z,1510169270.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:50.564Z,1510169270.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:50.942Z,1510169270.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:50.958Z,1510169270.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:51.342Z,1510169271.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:51.366Z,1510169271.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:51.723Z,1510169271.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:51.764Z,1510169271.764 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:51.764Z,1510169271.764 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 121
2017-11-08T19:27:51.777Z,1510169271.777 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T19:27:51.779Z,1510169271.779 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:51.779Z,1510169271.779 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 121
2017-11-08T19:27:51.779Z,1510169271.779 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T19:27:51.785Z,1510169271.785 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:51.785Z,1510169271.785 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 121
2017-11-08T19:27:51.785Z,1510169271.785 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T19:27:51.894Z,1510169271.894 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T19:27:51.895Z,1510169271.895 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T19:27:51.895Z,1510169271.895 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T19:27:52.115Z,1510169272.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:52.221Z,1510169272.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T19:27:52.221Z,1510169272.221 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 121
2017-11-08T19:27:52.221Z,1510169272.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T19:27:52.221Z,1510169272.221 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 121
2017-11-08T19:27:52.222Z,1510169272.222 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T19:27:52.222Z,1510169272.222 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 121
2017-11-08T19:27:52.517Z,1510169272.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:52.561Z,1510169272.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T19:27:52.561Z,1510169272.561 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:27:52.561Z,1510169272.561 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:27:52.562Z,1510169272.562 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T19:27:52.562Z,1510169272.562 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:27:52.562Z,1510169272.562 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:27:52.563Z,1510169272.563 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T19:27:52.563Z,1510169272.563 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:27:52.563Z,1510169272.563 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:27:52.918Z,1510169272.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:52.934Z,1510169272.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T19:27:52.935Z,1510169272.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:53.330Z,1510169273.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:53.362Z,1510169273.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T19:27:53.363Z,1510169273.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:53.734Z,1510169273.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:53.760Z,1510169273.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T19:27:53.761Z,1510169273.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:54.131Z,1510169274.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:54.162Z,1510169274.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T19:27:54.163Z,1510169274.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:54.519Z,1510169274.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:54.536Z,1510169274.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T19:27:54.537Z,1510169274.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:54.919Z,1510169274.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:54.936Z,1510169274.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T19:27:54.937Z,1510169274.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:55.323Z,1510169275.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:55.367Z,1510169275.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T19:27:55.368Z,1510169275.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:55.724Z,1510169275.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:55.744Z,1510169275.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T19:27:55.745Z,1510169275.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:56.122Z,1510169276.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:56.137Z,1510169276.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T19:27:56.138Z,1510169276.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:56.527Z,1510169276.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:56.548Z,1510169276.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T19:27:56.590Z,1510169276.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:56.942Z,1510169276.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:56.978Z,1510169276.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T19:27:56.979Z,1510169276.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:57.339Z,1510169277.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:57.389Z,1510169277.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T19:27:57.389Z,1510169277.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:57.715Z,1510169277.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:57.732Z,1510169277.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T19:27:57.741Z,1510169277.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:58.122Z,1510169278.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:58.176Z,1510169278.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T19:27:58.177Z,1510169278.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:58.520Z,1510169278.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:58.562Z,1510169278.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T19:27:58.563Z,1510169278.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:58.915Z,1510169278.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:58.935Z,1510169278.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T19:27:58.936Z,1510169278.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:59.329Z,1510169279.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:59.361Z,1510169279.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T19:27:59.362Z,1510169279.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:27:59.729Z,1510169279.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:27:59.762Z,1510169279.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T19:27:59.763Z,1510169279.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:00.140Z,1510169280.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:00.178Z,1510169280.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T19:28:00.179Z,1510169280.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:00.526Z,1510169280.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:00.566Z,1510169280.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T19:28:00.567Z,1510169280.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:00.923Z,1510169280.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:00.940Z,1510169280.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T19:28:00.972Z,1510169280.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:01.327Z,1510169281.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:01.362Z,1510169281.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T19:28:01.363Z,1510169281.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:04.585Z,1510169284.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:04.617Z,1510169284.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-08T19:28:04.618Z,1510169284.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:04.622Z,1510169284.622 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-08T19:23:03.0Z
2017-11-08T19:28:04.622Z,1510169284.622 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T19:28:04.622Z,1510169284.622 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-08T19:28:04.772Z,1510169284.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:04.819Z,1510169284.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2017-11-08T19:28:04.820Z,1510169284.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:05.460Z,1510169285.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:05.486Z,1510169285.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-08T19:28:05.487Z,1510169285.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:05.635Z,1510169285.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:05.676Z,1510169285.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2017-11-08T19:28:05.681Z,1510169285.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:06.032Z,1510169286.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:06.048Z,1510169286.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2017-11-08T19:28:06.049Z,1510169286.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:06.420Z,1510169286.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:06.445Z,1510169286.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2017-11-08T19:28:06.446Z,1510169286.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:10.079Z,1510169290.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:10.163Z,1510169290.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T19:28:10.164Z,1510169290.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:10.300Z,1510169290.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:10.358Z,1510169290.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-11-08T19:28:10.359Z,1510169290.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:10.704Z,1510169290.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:10.722Z,1510169290.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-11-08T19:28:10.723Z,1510169290.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:11.059Z,1510169291.059 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171108T132236/Courier0092.lzma
2017-11-08T19:28:11.107Z,1510169291.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:11.158Z,1510169291.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-11-08T19:28:11.159Z,1510169291.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:11.499Z,1510169291.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:11.517Z,1510169291.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-11-08T19:28:11.518Z,1510169291.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:11.899Z,1510169291.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:11.955Z,1510169291.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:12.257Z,1510169292.257 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Courier0092.lzma.bak
2017-11-08T19:28:12.258Z,1510169292.258 [DataOverHttps](INFO): SBD MOMSN=5223334
2017-11-08T19:28:12.303Z,1510169292.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:12.320Z,1510169292.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:13.274Z,1510169293.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:13.306Z,1510169293.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:13.431Z,1510169293.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:13.475Z,1510169293.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:13.860Z,1510169293.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:13.877Z,1510169293.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:16.982Z,1510169296.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:17.007Z,1510169297.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:17.134Z,1510169297.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:17.179Z,1510169297.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:17.527Z,1510169297.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:17.593Z,1510169297.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:17.927Z,1510169297.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:17.960Z,1510169297.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:18.331Z,1510169298.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:18.377Z,1510169298.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:18.733Z,1510169298.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:18.761Z,1510169298.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:19.132Z,1510169299.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:19.151Z,1510169299.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:19.536Z,1510169299.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:19.556Z,1510169299.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:24.447Z,1510169304.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:24.586Z,1510169304.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:24.696Z,1510169304.696 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T19:28:24.696Z,1510169304.696 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-08T19:28:24.790Z,1510169304.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:24.830Z,1510169304.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:25.077Z,1510169305.077 [Rowe_600LCM](INFO): Initializing
2017-11-08T19:28:25.077Z,1510169305.077 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T19:28:25.078Z,1510169305.078 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T19:28:25.078Z,1510169305.078 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-08T19:28:25.078Z,1510169305.078 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T19:28:25.164Z,1510169305.164 [DataOverHttps](INFO): Sending 401 bytes from file Logs/20171108T132236/Express0093.lzma
2017-11-08T19:28:25.195Z,1510169305.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:25.257Z,1510169305.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:25.366Z,1510169305.366 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T19:28:25.481Z,1510169305.481 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T19:28:25.575Z,1510169305.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:25.637Z,1510169305.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:25.712Z,1510169305.712 [Rowe_600LCM](INFO): Powering down
2017-11-08T19:28:25.941Z,1510169305.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:25.978Z,1510169305.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:26.310Z,1510169306.310 [DataOverHttps](INFO): Moved sent file to Logs/20171108T132236/Express0093.lzma.bak
2017-11-08T19:28:26.310Z,1510169306.310 [DataOverHttps](INFO): SBD MOMSN=5223336
2017-11-08T19:28:26.387Z,1510169306.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:26.415Z,1510169306.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:27.486Z,1510169307.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:27.544Z,1510169307.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:27.548Z,1510169307.548 [Default:CheckIn:Read_Iridium] Stopped
2017-11-08T19:28:27.549Z,1510169307.549 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-08T19:28:27.549Z,1510169307.549 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-08T19:28:27.640Z,1510169307.640 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T19:28:27.640Z,1510169307.640 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-08T19:28:27.715Z,1510169307.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:27.733Z,1510169307.733 [Rowe_600LCM](INFO): Initializing
2017-11-08T19:28:27.733Z,1510169307.733 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T19:28:27.733Z,1510169307.733 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T19:28:27.733Z,1510169307.733 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-08T19:28:27.733Z,1510169307.733 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T19:28:27.743Z,1510169307.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:27.854Z,1510169307.854 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T19:28:28.137Z,1510169308.137 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T19:28:28.308Z,1510169308.308 [Rowe_600LCM](INFO): Powering down
2017-11-08T19:28:31.190Z,1510169311.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:31.210Z,1510169311.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:31.313Z,1510169311.313 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T19:28:31.313Z,1510169311.313 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-08T19:28:31.356Z,1510169311.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:31.400Z,1510169311.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:31.553Z,1510169311.553 [Rowe_600LCM](INFO): Initializing
2017-11-08T19:28:31.554Z,1510169311.554 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T19:28:31.554Z,1510169311.554 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T19:28:31.554Z,1510169311.554 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-08T19:28:31.554Z,1510169311.554 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T19:28:31.773Z,1510169311.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:31.790Z,1510169311.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:31.873Z,1510169311.873 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T19:28:31.957Z,1510169311.957 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T19:28:32.053Z,1510169312.053 [Rowe_600LCM](INFO): Powering down
2017-11-08T19:28:32.180Z,1510169312.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:32.205Z,1510169312.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:32.574Z,1510169312.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:32.596Z,1510169312.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:32.955Z,1510169312.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:32.991Z,1510169312.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:33.351Z,1510169313.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:33.387Z,1510169313.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:33.465Z,1510169313.465 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T19:28:33.465Z,1510169313.465 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-08T19:28:33.669Z,1510169313.669 [Rowe_600LCM](INFO): Initializing
2017-11-08T19:28:33.669Z,1510169313.669 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T19:28:33.669Z,1510169313.669 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T19:28:33.669Z,1510169313.669 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-08T19:28:33.669Z,1510169313.669 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T19:28:33.767Z,1510169313.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:33.801Z,1510169313.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:33.889Z,1510169313.889 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T19:28:34.073Z,1510169314.073 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T19:28:34.159Z,1510169314.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:34.202Z,1510169314.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:34.259Z,1510169314.259 [Rowe_600LCM](INFO): Powering down
2017-11-08T19:28:34.566Z,1510169314.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:34.600Z,1510169314.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:34.966Z,1510169314.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:34.000Z,1510169315.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:35.366Z,1510169315.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:35.397Z,1510169315.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:35.481Z,1510169315.481 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-08T19:28:35.481Z,1510169315.481 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-08T19:28:35.752Z,1510169315.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:35.768Z,1510169315.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:35.873Z,1510169315.873 [Rowe_600LCM](INFO): Initializing
2017-11-08T19:28:35.873Z,1510169315.873 [Rowe_600LCM](INFO): Checking LCM
2017-11-08T19:28:35.873Z,1510169315.873 [Rowe_600LCM](FAULT): LCM not connected
2017-11-08T19:28:35.873Z,1510169315.873 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-08T19:28:35.874Z,1510169315.874 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-08T19:28:36.152Z,1510169316.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:36.168Z,1510169316.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:36.269Z,1510169316.269 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-08T19:28:36.269Z,1510169316.269 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-08T19:28:36.277Z,1510169316.277 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T19:28:36.385Z,1510169316.385 [Rowe_600LCM](INFO): Powering down
2017-11-08T19:28:36.561Z,1510169316.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:36.649Z,1510169316.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:36.951Z,1510169316.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:36.968Z,1510169316.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:37.366Z,1510169317.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:37.400Z,1510169317.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:37.766Z,1510169317.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:37.817Z,1510169317.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:38.160Z,1510169318.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:38.177Z,1510169318.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:38.550Z,1510169318.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:38.611Z,1510169318.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:38.955Z,1510169318.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:38.972Z,1510169318.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:39.359Z,1510169319.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:39.379Z,1510169319.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:39.751Z,1510169319.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:39.772Z,1510169319.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:40.155Z,1510169320.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:40.174Z,1510169320.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:40.563Z,1510169320.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:40.580Z,1510169320.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:40.962Z,1510169320.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:40.978Z,1510169320.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:41.362Z,1510169321.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:41.379Z,1510169321.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:41.758Z,1510169321.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:41.774Z,1510169321.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:42.158Z,1510169322.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:42.175Z,1510169322.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:42.560Z,1510169322.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:42.605Z,1510169322.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:42.954Z,1510169322.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:42.976Z,1510169322.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:43.362Z,1510169323.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:43.379Z,1510169323.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:43.767Z,1510169323.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:43.788Z,1510169323.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:44.170Z,1510169324.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:44.188Z,1510169324.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:44.553Z,1510169324.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:44.570Z,1510169324.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:44.955Z,1510169324.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:44.983Z,1510169324.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:45.358Z,1510169325.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:45.375Z,1510169325.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:45.755Z,1510169325.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:45.776Z,1510169325.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:46.158Z,1510169326.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:46.175Z,1510169326.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:46.566Z,1510169326.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:46.582Z,1510169326.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:46.962Z,1510169326.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:47.015Z,1510169327.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:47.362Z,1510169327.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:47.380Z,1510169327.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:47.757Z,1510169327.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:47.774Z,1510169327.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:48.156Z,1510169328.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:48.174Z,1510169328.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:48.556Z,1510169328.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:48.574Z,1510169328.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:48.957Z,1510169328.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:48.974Z,1510169328.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:49.362Z,1510169329.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:49.387Z,1510169329.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:49.766Z,1510169329.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:49.788Z,1510169329.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:50.165Z,1510169330.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:50.187Z,1510169330.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:50.554Z,1510169330.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:50.583Z,1510169330.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:50.961Z,1510169330.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:50.984Z,1510169330.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:51.354Z,1510169331.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:51.374Z,1510169331.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:51.750Z,1510169331.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:51.783Z,1510169331.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:52.155Z,1510169332.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:52.177Z,1510169332.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:52.568Z,1510169332.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:52.585Z,1510169332.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:52.966Z,1510169332.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:52.996Z,1510169332.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:53.372Z,1510169333.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:53.388Z,1510169333.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:53.759Z,1510169333.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:53.777Z,1510169333.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:54.157Z,1510169334.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:54.176Z,1510169334.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:54.559Z,1510169334.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:54.576Z,1510169334.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:54.948Z,1510169334.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:54.979Z,1510169334.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:55.368Z,1510169335.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:55.385Z,1510169335.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:55.771Z,1510169335.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:55.788Z,1510169335.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:56.173Z,1510169336.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:56.189Z,1510169336.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:56.558Z,1510169336.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:56.577Z,1510169336.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:56.955Z,1510169336.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:56.978Z,1510169336.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:57.358Z,1510169337.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:57.379Z,1510169337.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:57.758Z,1510169337.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:57.775Z,1510169337.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:58.155Z,1510169338.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:58.177Z,1510169338.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:58.572Z,1510169338.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:58.635Z,1510169338.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:58.973Z,1510169338.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:58.998Z,1510169338.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:59.370Z,1510169339.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:59.408Z,1510169339.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:28:59.754Z,1510169339.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:28:59.802Z,1510169339.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:00.156Z,1510169340.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:00.210Z,1510169340.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:00.562Z,1510169340.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:00.607Z,1510169340.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:00.955Z,1510169340.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:00.973Z,1510169340.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:01.370Z,1510169341.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:01.401Z,1510169341.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:01.766Z,1510169341.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:01.801Z,1510169341.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:02.166Z,1510169342.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:02.175Z,1510169342.175 [BPC1](ERROR): Failed to receive battery data
2017-11-08T19:29:02.175Z,1510169342.175 [BPC1] Communications Fault, FailCount= 1
2017-11-08T19:29:02.175Z,1510169342.175 [BPC1](ERROR): Communications Fault
2017-11-08T19:29:02.211Z,1510169342.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:02.293Z,1510169342.293 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-08T19:29:02.553Z,1510169342.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:02.570Z,1510169342.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:02.955Z,1510169342.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:02.976Z,1510169342.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:03.355Z,1510169343.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:03.376Z,1510169343.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:03.473Z,1510169343.473 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-08T19:29:03.473Z,1510169343.473 [BPC1] No Fault, FailCount= 1
2017-11-08T19:29:03.755Z,1510169343.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:03.844Z,1510169343.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:04.155Z,1510169344.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:04.178Z,1510169344.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:04.570Z,1510169344.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:04.602Z,1510169344.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:04.962Z,1510169344.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:04.979Z,1510169344.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:05.366Z,1510169345.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:05.400Z,1510169345.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:05.755Z,1510169345.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:05.776Z,1510169345.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:06.155Z,1510169346.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:06.172Z,1510169346.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:06.560Z,1510169346.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:06.603Z,1510169346.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:06.955Z,1510169346.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:06.971Z,1510169346.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:07.362Z,1510169347.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:07.379Z,1510169347.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:07.766Z,1510169347.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:07.802Z,1510169347.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:08.166Z,1510169348.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:08.199Z,1510169348.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:08.555Z,1510169348.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:08.576Z,1510169348.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:08.959Z,1510169348.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:09.006Z,1510169349.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:09.354Z,1510169349.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:09.419Z,1510169349.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:09.754Z,1510169349.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:09.853Z,1510169349.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:10.160Z,1510169350.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:10.184Z,1510169350.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:10.566Z,1510169350.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:10.583Z,1510169350.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:10.968Z,1510169350.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:10.992Z,1510169350.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:11.371Z,1510169351.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:11.388Z,1510169351.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:11.747Z,1510169351.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:11.773Z,1510169351.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:12.160Z,1510169352.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:12.401Z,1510169352.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:12.558Z,1510169352.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:12.598Z,1510169352.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:12.956Z,1510169352.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:12.984Z,1510169352.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:13.383Z,1510169353.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:13.404Z,1510169353.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:13.786Z,1510169353.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:13.829Z,1510169353.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:14.182Z,1510169354.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:14.198Z,1510169354.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:14.555Z,1510169354.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:14.590Z,1510169354.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:14.968Z,1510169354.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:14.988Z,1510169354.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:15.359Z,1510169355.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:15.394Z,1510169355.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:15.756Z,1510169355.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:15.786Z,1510169355.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:16.159Z,1510169356.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:16.191Z,1510169356.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:16.588Z,1510169356.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:16.607Z,1510169356.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:16.991Z,1510169356.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:17.016Z,1510169357.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:17.391Z,1510169357.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:17.414Z,1510169357.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:17.756Z,1510169357.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:17.789Z,1510169357.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:18.166Z,1510169358.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:18.214Z,1510169358.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:18.563Z,1510169358.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:18.580Z,1510169358.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:18.963Z,1510169358.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:19.004Z,1510169359.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:19.386Z,1510169359.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:19.428Z,1510169359.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:19.775Z,1510169359.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:19.822Z,1510169359.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:20.174Z,1510169360.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:20.189Z,1510169360.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:20.567Z,1510169360.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:20.592Z,1510169360.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:20.992Z,1510169360.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:21.022Z,1510169361.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:21.362Z,1510169361.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:21.384Z,1510169361.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:21.770Z,1510169361.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:21.789Z,1510169361.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:22.159Z,1510169362.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:22.186Z,1510169362.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:22.581Z,1510169362.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:22.603Z,1510169362.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:23.002Z,1510169363.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:23.052Z,1510169363.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:23.378Z,1510169363.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:23.394Z,1510169363.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:23.763Z,1510169363.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:23.799Z,1510169363.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:24.159Z,1510169364.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:24.228Z,1510169364.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:24.560Z,1510169364.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:24.587Z,1510169364.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:24.974Z,1510169364.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:25.029Z,1510169365.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:25.393Z,1510169365.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:25.436Z,1510169365.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:25.775Z,1510169365.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:25.811Z,1510169365.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:26.175Z,1510169366.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:26.201Z,1510169366.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:26.563Z,1510169366.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:26.599Z,1510169366.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:26.962Z,1510169366.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:27.004Z,1510169367.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:27.359Z,1510169367.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:27.383Z,1510169367.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:27.764Z,1510169367.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:27.804Z,1510169367.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:28.162Z,1510169368.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:28.208Z,1510169368.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:28.582Z,1510169368.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:28.607Z,1510169368.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:28.975Z,1510169368.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:29.011Z,1510169369.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:29.379Z,1510169369.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:29.415Z,1510169369.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:29.766Z,1510169369.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:29.787Z,1510169369.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:30.167Z,1510169370.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:30.192Z,1510169370.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:33.434Z,1510169373.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:33.510Z,1510169373.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:33.635Z,1510169373.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:33.671Z,1510169373.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:34.064Z,1510169374.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:34.116Z,1510169374.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:34.460Z,1510169374.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:34.484Z,1510169374.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:34.847Z,1510169374.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:34.872Z,1510169374.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:35.231Z,1510169375.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:35.265Z,1510169375.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:35.628Z,1510169375.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:35.644Z,1510169375.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:36.035Z,1510169376.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:36.051Z,1510169376.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:36.446Z,1510169376.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:36.480Z,1510169376.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:36.845Z,1510169376.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:36.862Z,1510169376.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:37.246Z,1510169377.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:37.262Z,1510169377.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:37.635Z,1510169377.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:37.651Z,1510169377.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:38.040Z,1510169378.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:38.061Z,1510169378.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:38.435Z,1510169378.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:38.456Z,1510169378.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:38.844Z,1510169378.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:38.915Z,1510169378.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:39.245Z,1510169379.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:39.262Z,1510169379.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:39.662Z,1510169379.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:39.685Z,1510169379.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:40.074Z,1510169380.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:40.090Z,1510169380.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:40.436Z,1510169380.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:40.457Z,1510169380.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:40.837Z,1510169380.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:40.860Z,1510169380.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:41.246Z,1510169381.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:41.267Z,1510169381.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:41.651Z,1510169381.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:41.671Z,1510169381.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:42.056Z,1510169382.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:42.072Z,1510169382.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:42.435Z,1510169382.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:42.460Z,1510169382.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:42.859Z,1510169382.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:42.875Z,1510169382.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:43.247Z,1510169383.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:43.303Z,1510169383.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:43.652Z,1510169383.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:43.729Z,1510169383.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:44.052Z,1510169384.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:44.121Z,1510169384.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:44.451Z,1510169384.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:44.472Z,1510169384.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:44.834Z,1510169384.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:44.902Z,1510169384.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:45.254Z,1510169385.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:45.270Z,1510169385.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:45.657Z,1510169385.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:45.712Z,1510169385.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:46.050Z,1510169386.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:46.076Z,1510169386.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:46.432Z,1510169386.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:46.465Z,1510169386.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:46.840Z,1510169386.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:46.879Z,1510169386.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:47.257Z,1510169387.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:47.274Z,1510169387.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:47.641Z,1510169387.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:47.667Z,1510169387.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:48.038Z,1510169388.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:48.071Z,1510169388.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:48.437Z,1510169388.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:48.473Z,1510169388.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:48.828Z,1510169388.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:48.844Z,1510169388.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:49.248Z,1510169389.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:49.264Z,1510169389.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:49.653Z,1510169389.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:49.675Z,1510169389.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:50.048Z,1510169390.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:50.065Z,1510169390.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:50.428Z,1510169390.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:50.465Z,1510169390.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:50.828Z,1510169390.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:50.863Z,1510169390.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:51.230Z,1510169391.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:51.256Z,1510169391.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:51.657Z,1510169391.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:51.689Z,1510169391.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:52.052Z,1510169392.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:52.068Z,1510169392.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:52.446Z,1510169392.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:52.477Z,1510169392.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:52.829Z,1510169392.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:52.866Z,1510169392.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:53.231Z,1510169393.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:53.266Z,1510169393.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:53.632Z,1510169393.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:53.668Z,1510169393.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:54.027Z,1510169394.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:54.080Z,1510169394.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:54.442Z,1510169394.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:54.475Z,1510169394.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:54.853Z,1510169394.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:54.875Z,1510169394.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:55.244Z,1510169395.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:55.283Z,1510169395.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:55.633Z,1510169395.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:55.649Z,1510169395.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:56.041Z,1510169396.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:56.096Z,1510169396.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:56.436Z,1510169396.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:56.461Z,1510169396.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:56.836Z,1510169396.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:56.853Z,1510169396.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:57.245Z,1510169397.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:57.261Z,1510169397.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:57.646Z,1510169397.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:57.662Z,1510169397.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:58.046Z,1510169398.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:58.062Z,1510169398.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:58.434Z,1510169398.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:58.450Z,1510169398.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:58.834Z,1510169398.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:58.851Z,1510169398.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:59.239Z,1510169399.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:59.255Z,1510169399.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:29:59.640Z,1510169399.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:29:59.657Z,1510169399.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:00.042Z,1510169400.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:00.060Z,1510169400.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:00.450Z,1510169400.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:00.466Z,1510169400.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:00.839Z,1510169400.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:00.855Z,1510169400.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:01.238Z,1510169401.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:01.255Z,1510169401.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:01.641Z,1510169401.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:01.658Z,1510169401.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:02.027Z,1510169402.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:02.091Z,1510169402.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:02.451Z,1510169402.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:02.468Z,1510169402.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:02.852Z,1510169402.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:02.870Z,1510169402.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:03.253Z,1510169403.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:03.275Z,1510169403.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:03.631Z,1510169403.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:03.667Z,1510169403.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:04.031Z,1510169404.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:04.057Z,1510169404.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:04.432Z,1510169404.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:04.490Z,1510169404.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:04.827Z,1510169404.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:04.884Z,1510169404.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:05.242Z,1510169405.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:05.275Z,1510169405.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:05.641Z,1510169405.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:05.695Z,1510169405.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:06.042Z,1510169406.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:06.071Z,1510169406.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:06.432Z,1510169406.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:06.481Z,1510169406.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:06.827Z,1510169406.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:06.869Z,1510169406.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:07.242Z,1510169407.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:07.274Z,1510169407.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:07.652Z,1510169407.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:07.668Z,1510169407.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:08.053Z,1510169408.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:08.069Z,1510169408.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:08.427Z,1510169408.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:08.444Z,1510169408.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:08.841Z,1510169408.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:08.874Z,1510169408.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:09.228Z,1510169409.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:09.278Z,1510169409.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:09.643Z,1510169409.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:09.708Z,1510169409.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:10.046Z,1510169410.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:10.084Z,1510169410.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:10.442Z,1510169410.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:10.475Z,1510169410.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:10.827Z,1510169410.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:10.868Z,1510169410.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:11.231Z,1510169411.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:11.272Z,1510169411.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:11.636Z,1510169411.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:11.652Z,1510169411.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:12.038Z,1510169412.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:12.085Z,1510169412.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:12.442Z,1510169412.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:12.463Z,1510169412.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:12.845Z,1510169412.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:12.867Z,1510169412.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:13.246Z,1510169413.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:13.263Z,1510169413.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:13.638Z,1510169413.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:13.660Z,1510169413.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:14.037Z,1510169414.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:14.061Z,1510169414.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:14.437Z,1510169414.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:14.457Z,1510169414.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:14.840Z,1510169414.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:14.899Z,1510169414.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:15.238Z,1510169415.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:15.255Z,1510169415.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:15.650Z,1510169415.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:15.666Z,1510169415.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:16.061Z,1510169416.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:16.086Z,1510169416.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:16.467Z,1510169416.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:16.493Z,1510169416.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:16.828Z,1510169416.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:16.861Z,1510169416.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:17.242Z,1510169417.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:17.258Z,1510169417.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:17.640Z,1510169417.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:17.656Z,1510169417.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:18.027Z,1510169418.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:18.074Z,1510169418.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:18.447Z,1510169418.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:18.468Z,1510169418.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:18.856Z,1510169418.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:18.872Z,1510169418.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:19.247Z,1510169419.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:19.268Z,1510169419.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:19.637Z,1510169419.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:19.660Z,1510169419.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:20.038Z,1510169420.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:20.054Z,1510169420.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:20.428Z,1510169420.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:20.462Z,1510169420.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:20.836Z,1510169420.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:20.860Z,1510169420.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:21.227Z,1510169421.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:21.255Z,1510169421.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:21.647Z,1510169421.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:21.668Z,1510169421.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:22.048Z,1510169422.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:22.064Z,1510169422.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:22.452Z,1510169422.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:22.475Z,1510169422.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:22.832Z,1510169422.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:22.857Z,1510169422.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:23.244Z,1510169423.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:23.261Z,1510169423.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:23.633Z,1510169423.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:23.679Z,1510169423.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:24.027Z,1510169424.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:24.062Z,1510169424.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:24.453Z,1510169424.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:24.469Z,1510169424.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:24.853Z,1510169424.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:24.870Z,1510169424.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:25.245Z,1510169425.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:25.353Z,1510169425.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:25.636Z,1510169425.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:25.654Z,1510169425.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:26.035Z,1510169426.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:26.051Z,1510169426.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:26.447Z,1510169426.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:26.492Z,1510169426.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:26.839Z,1510169426.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:26.860Z,1510169426.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:27.254Z,1510169427.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:27.297Z,1510169427.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:27.649Z,1510169427.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:27.681Z,1510169427.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:28.050Z,1510169428.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:28.093Z,1510169428.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:28.438Z,1510169428.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:28.463Z,1510169428.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:31.652Z,1510169431.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:31.689Z,1510169431.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:31.807Z,1510169431.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:31.844Z,1510169431.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:32.214Z,1510169432.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:32.236Z,1510169432.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:32.613Z,1510169432.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:32.644Z,1510169432.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:33.014Z,1510169433.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:33.037Z,1510169433.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:33.402Z,1510169433.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:33.418Z,1510169433.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:33.804Z,1510169433.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:33.839Z,1510169433.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:34.211Z,1510169434.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:34.244Z,1510169434.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:34.609Z,1510169434.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:34.646Z,1510169434.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:35.010Z,1510169435.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:35.026Z,1510169435.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:35.414Z,1510169435.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:35.467Z,1510169435.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:35.798Z,1510169435.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:35.816Z,1510169435.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:36.202Z,1510169436.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:36.219Z,1510169436.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:36.605Z,1510169436.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:36.622Z,1510169436.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:37.002Z,1510169437.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:37.018Z,1510169437.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:37.418Z,1510169437.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:37.449Z,1510169437.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:37.818Z,1510169437.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:37.848Z,1510169437.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:38.219Z,1510169438.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:38.249Z,1510169438.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:38.599Z,1510169438.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:38.619Z,1510169438.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:39.003Z,1510169439.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:39.023Z,1510169439.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:39.399Z,1510169439.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:39.415Z,1510169439.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:39.800Z,1510169439.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:39.816Z,1510169439.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:40.203Z,1510169440.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:40.224Z,1510169440.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:40.617Z,1510169440.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:40.649Z,1510169440.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:41.014Z,1510169441.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:41.048Z,1510169441.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:41.414Z,1510169441.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:41.450Z,1510169441.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:41.803Z,1510169441.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:41.819Z,1510169441.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:42.207Z,1510169442.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:42.224Z,1510169442.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:42.607Z,1510169442.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:42.627Z,1510169442.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:43.006Z,1510169443.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:43.045Z,1510169443.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:43.416Z,1510169443.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:43.445Z,1510169443.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:43.815Z,1510169443.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:43.831Z,1510169443.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:44.210Z,1510169444.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:44.232Z,1510169444.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:44.605Z,1510169444.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:44.622Z,1510169444.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:45.005Z,1510169445.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:45.022Z,1510169445.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:45.405Z,1510169445.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:45.428Z,1510169445.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:45.806Z,1510169445.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:45.874Z,1510169445.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:46.208Z,1510169446.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:46.234Z,1510169446.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:46.622Z,1510169446.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:46.681Z,1510169446.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:47.015Z,1510169447.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:47.057Z,1510169447.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:47.413Z,1510169447.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:47.446Z,1510169447.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:47.803Z,1510169447.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:47.870Z,1510169447.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:48.221Z,1510169448.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:48.245Z,1510169448.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:48.600Z,1510169448.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:48.659Z,1510169448.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:48.999Z,1510169448.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:49.016Z,1510169449.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:49.414Z,1510169449.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:49.438Z,1510169449.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:49.813Z,1510169449.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:49.838Z,1510169449.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:50.214Z,1510169450.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:50.239Z,1510169450.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:50.600Z,1510169450.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:50.616Z,1510169450.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:51.002Z,1510169451.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:51.040Z,1510169451.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:51.400Z,1510169451.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:51.416Z,1510169451.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:51.798Z,1510169451.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:51.815Z,1510169451.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:52.203Z,1510169452.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:52.224Z,1510169452.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:52.614Z,1510169452.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:52.650Z,1510169452.650 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:52.650Z,1510169452.650 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 122
2017-11-08T19:30:52.650Z,1510169452.650 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-08T19:30:52.652Z,1510169452.652 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:52.652Z,1510169452.652 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 122
2017-11-08T19:30:52.652Z,1510169452.652 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-08T19:30:52.658Z,1510169452.658 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:52.658Z,1510169452.658 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 122
2017-11-08T19:30:52.658Z,1510169452.658 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-08T19:30:52.745Z,1510169452.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-08T19:30:52.745Z,1510169452.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-08T19:30:52.745Z,1510169452.745 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-08T19:30:53.011Z,1510169453.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:53.105Z,1510169453.105 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-08T19:30:53.105Z,1510169453.105 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 122
2017-11-08T19:30:53.105Z,1510169453.105 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-08T19:30:53.105Z,1510169453.105 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 122
2017-11-08T19:30:53.106Z,1510169453.106 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-08T19:30:53.106Z,1510169453.106 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 122
2017-11-08T19:30:53.410Z,1510169453.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:53.430Z,1510169453.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-08T19:30:53.431Z,1510169453.431 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:30:53.431Z,1510169453.431 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:30:53.432Z,1510169453.432 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-08T19:30:53.432Z,1510169453.432 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:30:53.433Z,1510169453.433 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:30:53.433Z,1510169453.433 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-08T19:30:53.433Z,1510169453.433 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-08T19:30:53.434Z,1510169453.434 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-08T19:30:53.801Z,1510169453.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:53.830Z,1510169453.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-11-08T19:30:53.831Z,1510169453.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:54.206Z,1510169454.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:54.222Z,1510169454.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-11-08T19:30:54.223Z,1510169454.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:54.607Z,1510169454.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:54.624Z,1510169454.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-11-08T19:30:54.625Z,1510169454.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:55.012Z,1510169455.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:55.028Z,1510169455.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-11-08T19:30:55.029Z,1510169455.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:55.416Z,1510169455.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:55.432Z,1510169455.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-11-08T19:30:55.433Z,1510169455.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:55.815Z,1510169455.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:55.831Z,1510169455.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-11-08T19:30:55.832Z,1510169455.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:56.216Z,1510169456.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:56.232Z,1510169456.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-11-08T19:30:56.233Z,1510169456.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:56.607Z,1510169456.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:56.627Z,1510169456.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-11-08T19:30:56.628Z,1510169456.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:57.017Z,1510169457.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:57.074Z,1510169457.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-11-08T19:30:57.075Z,1510169457.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:57.408Z,1510169457.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:57.425Z,1510169457.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-08T19:30:57.426Z,1510169457.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:57.807Z,1510169457.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:57.823Z,1510169457.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-11-08T19:30:57.825Z,1510169457.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:58.199Z,1510169458.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:58.231Z,1510169458.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-08T19:30:58.232Z,1510169458.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:58.622Z,1510169458.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:58.638Z,1510169458.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-11-08T19:30:58.639Z,1510169458.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:59.021Z,1510169459.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:59.037Z,1510169459.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-11-08T19:30:59.038Z,1510169459.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:59.415Z,1510169459.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:59.438Z,1510169459.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-11-08T19:30:59.439Z,1510169459.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:30:59.800Z,1510169459.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:30:59.832Z,1510169459.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-11-08T19:30:59.833Z,1510169459.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:00.195Z,1510169460.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:00.231Z,1510169460.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-11-08T19:31:00.232Z,1510169460.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:00.600Z,1510169460.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:00.642Z,1510169460.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-08T19:31:00.643Z,1510169460.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:00.997Z,1510169460.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:01.036Z,1510169461.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-11-08T19:31:01.038Z,1510169461.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:01.414Z,1510169461.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:01.435Z,1510169461.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-11-08T19:31:01.437Z,1510169461.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:01.832Z,1510169461.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:01.849Z,1510169461.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-11-08T19:31:01.850Z,1510169461.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:02.222Z,1510169462.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:02.237Z,1510169462.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-08T19:31:02.238Z,1510169462.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:02.596Z,1510169462.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:02.635Z,1510169462.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-08T19:31:02.636Z,1510169462.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:03.000Z,1510169463.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:03.032Z,1510169463.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-11-08T19:31:03.037Z,1510169463.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:03.399Z,1510169463.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:03.416Z,1510169463.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-11-08T19:31:03.427Z,1510169463.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:03.796Z,1510169463.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:03.813Z,1510169463.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-11-08T19:31:03.814Z,1510169463.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:04.199Z,1510169464.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:04.215Z,1510169464.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-11-08T19:31:04.216Z,1510169464.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:04.609Z,1510169464.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:04.645Z,1510169464.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-08T19:31:04.646Z,1510169464.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:05.017Z,1510169465.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:05.043Z,1510169465.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-11-08T19:31:05.044Z,1510169465.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:05.414Z,1510169465.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:05.447Z,1510169465.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-11-08T19:31:05.448Z,1510169465.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:05.798Z,1510169465.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:05.819Z,1510169465.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-08T19:31:05.820Z,1510169465.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:06.199Z,1510169466.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:06.215Z,1510169466.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-11-08T19:31:06.216Z,1510169466.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:06.604Z,1510169466.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:06.620Z,1510169466.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-11-08T19:31:06.621Z,1510169466.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:07.003Z,1510169467.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:07.019Z,1510169467.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-08T19:31:07.020Z,1510169467.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:07.420Z,1510169467.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:07.453Z,1510169467.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-11-08T19:31:07.455Z,1510169467.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:07.820Z,1510169467.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:07.952Z,1510169467.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-08T19:31:07.953Z,1510169467.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:08.218Z,1510169468.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:08.234Z,1510169468.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-11-08T19:31:08.235Z,1510169468.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:08.607Z,1510169468.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:08.667Z,1510169468.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-08T19:31:08.668Z,1510169468.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:08.999Z,1510169468.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:09.030Z,1510169469.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-11-08T19:31:09.031Z,1510169469.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:09.408Z,1510169469.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:09.462Z,1510169469.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-08T19:31:09.463Z,1510169469.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:09.808Z,1510169469.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:09.826Z,1510169469.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-11-08T19:31:09.827Z,1510169469.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:10.207Z,1510169470.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:10.224Z,1510169470.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-11-08T19:31:10.225Z,1510169470.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:10.611Z,1510169470.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:10.629Z,1510169470.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-08T19:31:10.630Z,1510169470.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:11.015Z,1510169471.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:11.033Z,1510169471.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-11-08T19:31:11.034Z,1510169471.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:11.414Z,1510169471.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:11.429Z,1510169471.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-11-08T19:31:11.430Z,1510169471.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:11.803Z,1510169471.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:11.819Z,1510169471.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-08T19:31:11.820Z,1510169471.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:12.214Z,1510169472.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:12.232Z,1510169472.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-08T19:31:12.233Z,1510169472.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:12.607Z,1510169472.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:12.623Z,1510169472.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-11-08T19:31:12.624Z,1510169472.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:12.997Z,1510169472.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:13.032Z,1510169473.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:13.420Z,1510169473.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:13.437Z,1510169473.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:13.820Z,1510169473.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:13.839Z,1510169473.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:14.220Z,1510169474.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:14.236Z,1510169474.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:14.607Z,1510169474.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:14.635Z,1510169474.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:15.011Z,1510169475.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:15.030Z,1510169475.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:15.401Z,1510169475.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:15.431Z,1510169475.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:15.801Z,1510169475.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:15.829Z,1510169475.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:16.207Z,1510169476.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:16.241Z,1510169476.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:16.611Z,1510169476.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:16.648Z,1510169476.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:17.015Z,1510169477.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:17.040Z,1510169477.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:17.416Z,1510169477.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:17.450Z,1510169477.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:17.798Z,1510169477.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:17.847Z,1510169477.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:18.202Z,1510169478.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:18.238Z,1510169478.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:18.603Z,1510169478.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:18.652Z,1510169478.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:19.001Z,1510169479.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:19.052Z,1510169479.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:19.412Z,1510169479.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:19.461Z,1510169479.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:19.810Z,1510169479.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:19.832Z,1510169479.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:20.214Z,1510169480.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:20.231Z,1510169480.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:20.606Z,1510169480.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:20.622Z,1510169480.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:21.065Z,1510169481.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:21.081Z,1510169481.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:21.407Z,1510169481.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:21.423Z,1510169481.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:21.809Z,1510169481.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:21.826Z,1510169481.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:22.206Z,1510169482.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:22.222Z,1510169482.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:22.615Z,1510169482.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:22.639Z,1510169482.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:23.015Z,1510169483.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:23.083Z,1510169483.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:23.414Z,1510169483.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:23.431Z,1510169483.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:23.802Z,1510169483.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:23.818Z,1510169483.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:24.204Z,1510169484.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:24.221Z,1510169484.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:24.608Z,1510169484.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:24.624Z,1510169484.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:25.004Z,1510169485.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:25.020Z,1510169485.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:25.415Z,1510169485.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:25.440Z,1510169485.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:25.821Z,1510169485.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:25.863Z,1510169485.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:26.217Z,1510169486.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:26.233Z,1510169486.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:26.606Z,1510169486.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:26.622Z,1510169486.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:27.003Z,1510169487.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:27.033Z,1510169487.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:27.403Z,1510169487.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:27.424Z,1510169487.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:27.811Z,1510169487.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:27.832Z,1510169487.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:28.210Z,1510169488.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:28.232Z,1510169488.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:28.617Z,1510169488.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:28.672Z,1510169488.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:29.018Z,1510169489.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:29.034Z,1510169489.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:32.111Z,1510169492.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:32.157Z,1510169492.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:32.267Z,1510169492.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:32.306Z,1510169492.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:32.669Z,1510169492.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:32.720Z,1510169492.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:33.067Z,1510169493.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:33.083Z,1510169493.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:33.468Z,1510169493.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:33.485Z,1510169493.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:33.868Z,1510169493.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:33.891Z,1510169493.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:34.285Z,1510169494.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:34.317Z,1510169494.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:34.674Z,1510169494.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:34.690Z,1510169494.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:35.078Z,1510169495.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:35.094Z,1510169495.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:35.467Z,1510169495.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:35.486Z,1510169495.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:35.865Z,1510169495.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:35.881Z,1510169495.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:36.278Z,1510169496.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:36.294Z,1510169496.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:36.673Z,1510169496.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:36.695Z,1510169496.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:37.070Z,1510169497.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:37.087Z,1510169497.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:37.468Z,1510169497.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:37.491Z,1510169497.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:37.869Z,1510169497.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:37.885Z,1510169497.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:38.274Z,1510169498.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:38.291Z,1510169498.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:38.686Z,1510169498.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:38.718Z,1510169498.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:39.077Z,1510169499.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:39.093Z,1510169499.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:39.471Z,1510169499.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:39.488Z,1510169499.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:39.867Z,1510169499.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:39.892Z,1510169499.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:40.283Z,1510169500.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:40.304Z,1510169500.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:40.681Z,1510169500.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:40.697Z,1510169500.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:41.089Z,1510169501.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:41.138Z,1510169501.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:41.475Z,1510169501.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:41.538Z,1510169501.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:41.870Z,1510169501.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:41.941Z,1510169501.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:42.282Z,1510169502.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:42.324Z,1510169502.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:42.685Z,1510169502.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:42.729Z,1510169502.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:43.089Z,1510169503.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:43.162Z,1510169503.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:43.468Z,1510169503.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:43.510Z,1510169503.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:43.870Z,1510169503.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:43.893Z,1510169503.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:44.277Z,1510169504.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:44.297Z,1510169504.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:44.698Z,1510169504.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:44.731Z,1510169504.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:45.080Z,1510169505.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:45.096Z,1510169505.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:45.473Z,1510169505.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:45.501Z,1510169505.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:45.875Z,1510169505.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:45.896Z,1510169505.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:46.282Z,1510169506.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:46.344Z,1510169506.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:46.674Z,1510169506.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:46.709Z,1510169506.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:47.079Z,1510169507.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:47.104Z,1510169507.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:47.470Z,1510169507.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:47.510Z,1510169507.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:47.863Z,1510169507.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:47.904Z,1510169507.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:48.283Z,1510169508.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:48.310Z,1510169508.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:48.682Z,1510169508.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:48.715Z,1510169508.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:49.078Z,1510169509.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:49.115Z,1510169509.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:49.468Z,1510169509.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:49.486Z,1510169509.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:49.866Z,1510169509.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:49.882Z,1510169509.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:50.278Z,1510169510.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:50.311Z,1510169510.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:50.682Z,1510169510.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:50.707Z,1510169510.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:51.077Z,1510169511.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:51.109Z,1510169511.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:51.463Z,1510169511.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:51.484Z,1510169511.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:51.866Z,1510169511.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:51.936Z,1510169511.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:52.273Z,1510169512.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:52.308Z,1510169512.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:52.674Z,1510169512.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:52.706Z,1510169512.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:53.078Z,1510169513.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:53.134Z,1510169513.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:53.467Z,1510169513.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:53.483Z,1510169513.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:53.867Z,1510169513.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:53.883Z,1510169513.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:54.278Z,1510169514.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:54.332Z,1510169514.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:54.677Z,1510169514.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:54.716Z,1510169514.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:55.074Z,1510169515.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:55.120Z,1510169515.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:55.468Z,1510169515.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:55.484Z,1510169515.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:55.866Z,1510169515.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:55.882Z,1510169515.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:56.279Z,1510169516.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:56.315Z,1510169516.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:56.688Z,1510169516.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:56.719Z,1510169516.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:57.084Z,1510169517.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:57.134Z,1510169517.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:57.470Z,1510169517.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:57.486Z,1510169517.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:57.870Z,1510169517.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:57.887Z,1510169517.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:58.277Z,1510169518.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:58.293Z,1510169518.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:58.680Z,1510169518.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:58.700Z,1510169518.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:59.079Z,1510169519.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:59.121Z,1510169519.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:59.477Z,1510169519.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:59.497Z,1510169519.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:31:59.871Z,1510169519.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:31:59.891Z,1510169519.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:00.279Z,1510169520.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:00.301Z,1510169520.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:00.681Z,1510169520.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:00.702Z,1510169520.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:01.077Z,1510169521.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:01.105Z,1510169521.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:01.466Z,1510169521.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:01.504Z,1510169521.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:01.865Z,1510169521.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:01.905Z,1510169521.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:02.286Z,1510169522.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:02.316Z,1510169522.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:02.683Z,1510169522.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:02.724Z,1510169522.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:03.084Z,1510169523.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:03.129Z,1510169523.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:03.471Z,1510169523.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:03.531Z,1510169523.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:03.867Z,1510169523.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:03.888Z,1510169523.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:04.281Z,1510169524.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:04.320Z,1510169524.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:04.683Z,1510169524.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:04.717Z,1510169524.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:05.083Z,1510169525.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:05.134Z,1510169525.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:05.474Z,1510169525.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:05.493Z,1510169525.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:05.876Z,1510169525.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:05.897Z,1510169525.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:06.280Z,1510169526.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:06.302Z,1510169526.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:06.684Z,1510169526.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:06.703Z,1510169526.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:07.082Z,1510169527.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:07.103Z,1510169527.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:07.477Z,1510169527.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:07.499Z,1510169527.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:07.867Z,1510169527.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:07.901Z,1510169527.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:08.289Z,1510169528.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:08.308Z,1510169528.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:08.682Z,1510169528.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:08.706Z,1510169528.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:09.078Z,1510169529.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:09.120Z,1510169529.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:09.467Z,1510169529.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:09.488Z,1510169529.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:09.866Z,1510169529.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:09.882Z,1510169529.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:10.278Z,1510169530.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:10.309Z,1510169530.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:10.677Z,1510169530.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:10.708Z,1510169530.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:11.088Z,1510169531.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:11.120Z,1510169531.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:11.466Z,1510169531.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:11.484Z,1510169531.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:11.873Z,1510169531.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:11.889Z,1510169531.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:12.266Z,1510169532.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:12.283Z,1510169532.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:12.679Z,1510169532.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:12.696Z,1510169532.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:13.078Z,1510169533.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:13.116Z,1510169533.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:13.480Z,1510169533.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:13.496Z,1510169533.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:13.870Z,1510169533.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:13.891Z,1510169533.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:14.270Z,1510169534.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:14.286Z,1510169534.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:14.676Z,1510169534.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:14.693Z,1510169534.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:15.070Z,1510169535.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:15.091Z,1510169535.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:15.479Z,1510169535.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:15.547Z,1510169535.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:15.884Z,1510169535.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:15.901Z,1510169535.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:16.286Z,1510169536.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:16.303Z,1510169536.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:16.667Z,1510169536.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:16.730Z,1510169536.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:17.063Z,1510169537.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:17.099Z,1510169537.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:17.465Z,1510169537.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:17.527Z,1510169537.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:17.865Z,1510169537.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:17.900Z,1510169537.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:18.277Z,1510169538.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:18.309Z,1510169538.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:18.685Z,1510169538.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:18.701Z,1510169538.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:19.071Z,1510169539.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:19.102Z,1510169539.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:19.465Z,1510169539.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:19.495Z,1510169539.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:19.864Z,1510169539.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:19.897Z,1510169539.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:20.274Z,1510169540.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:20.304Z,1510169540.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:20.689Z,1510169540.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:20.714Z,1510169540.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:21.078Z,1510169541.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:21.105Z,1510169541.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:21.461Z,1510169541.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:21.477Z,1510169541.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:21.863Z,1510169541.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:21.880Z,1510169541.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:22.291Z,1510169542.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:22.308Z,1510169542.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:22.682Z,1510169542.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:22.706Z,1510169542.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:23.074Z,1510169543.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:23.098Z,1510169543.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:23.469Z,1510169543.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:23.485Z,1510169543.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:23.863Z,1510169543.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:23.879Z,1510169543.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:24.280Z,1510169544.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:24.320Z,1510169544.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:24.674Z,1510169544.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:24.690Z,1510169544.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:25.074Z,1510169545.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:25.090Z,1510169545.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:25.473Z,1510169545.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:25.490Z,1510169545.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:25.867Z,1510169545.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:25.923Z,1510169545.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:26.280Z,1510169546.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:26.296Z,1510169546.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:26.679Z,1510169546.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:26.700Z,1510169546.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:27.080Z,1510169547.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:27.104Z,1510169547.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:27.500Z,1510169547.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:27.529Z,1510169547.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:27.871Z,1510169547.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:27.888Z,1510169547.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:28.286Z,1510169548.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:28.303Z,1510169548.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:28.683Z,1510169548.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:28.703Z,1510169548.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:31.906Z,1510169551.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:31.938Z,1510169551.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:32.051Z,1510169552.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:32.084Z,1510169552.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:32.450Z,1510169552.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:32.466Z,1510169552.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:32.847Z,1510169552.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:32.862Z,1510169552.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:33.258Z,1510169553.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:33.289Z,1510169553.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:33.658Z,1510169553.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:33.689Z,1510169553.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:34.053Z,1510169554.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:34.089Z,1510169554.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:34.448Z,1510169554.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:34.465Z,1510169554.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:34.847Z,1510169554.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:34.868Z,1510169554.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:35.262Z,1510169555.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:35.299Z,1510169555.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:35.658Z,1510169555.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:35.689Z,1510169555.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:36.058Z,1510169556.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:36.088Z,1510169556.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:36.443Z,1510169556.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:36.463Z,1510169556.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:36.846Z,1510169556.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:36.864Z,1510169556.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:37.259Z,1510169557.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:37.289Z,1510169557.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:37.658Z,1510169557.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:37.690Z,1510169557.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:38.058Z,1510169558.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:38.119Z,1510169558.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:38.447Z,1510169558.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:38.515Z,1510169558.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:38.847Z,1510169558.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:38.863Z,1510169558.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:39.258Z,1510169559.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:39.275Z,1510169559.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:39.658Z,1510169559.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:39.711Z,1510169559.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:40.053Z,1510169560.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:40.075Z,1510169560.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:40.449Z,1510169560.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:40.503Z,1510169560.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:40.849Z,1510169560.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:40.865Z,1510169560.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:41.257Z,1510169561.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:41.273Z,1510169561.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:41.654Z,1510169561.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:41.670Z,1510169561.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:42.058Z,1510169562.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:42.096Z,1510169562.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:42.446Z,1510169562.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:42.472Z,1510169562.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:42.843Z,1510169562.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:42.870Z,1510169562.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:43.402Z,1510169563.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:43.419Z,1510169563.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:43.658Z,1510169563.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:43.702Z,1510169563.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:44.054Z,1510169564.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:44.071Z,1510169564.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:44.456Z,1510169564.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:44.477Z,1510169564.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:44.843Z,1510169564.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:44.866Z,1510169564.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:45.264Z,1510169565.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:45.281Z,1510169565.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:45.660Z,1510169565.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:45.676Z,1510169565.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:46.058Z,1510169566.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:46.080Z,1510169566.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:46.454Z,1510169566.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:46.470Z,1510169566.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:46.852Z,1510169566.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:46.867Z,1510169566.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:47.243Z,1510169567.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:47.300Z,1510169567.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:47.659Z,1510169567.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:47.675Z,1510169567.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:48.068Z,1510169568.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:48.088Z,1510169568.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:48.461Z,1510169568.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:48.485Z,1510169568.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:48.844Z,1510169568.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:48.900Z,1510169568.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:49.241Z,1510169569.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:49.320Z,1510169569.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:49.644Z,1510169569.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:49.674Z,1510169569.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:50.046Z,1510169570.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:50.076Z,1510169570.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:50.467Z,1510169570.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:50.488Z,1510169570.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:50.861Z,1510169570.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:50.877Z,1510169570.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:51.260Z,1510169571.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:51.283Z,1510169571.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:51.639Z,1510169571.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:51.675Z,1510169571.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:52.039Z,1510169572.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:52.056Z,1510169572.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:52.444Z,1510169572.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:52.460Z,1510169572.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:52.839Z,1510169572.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:52.859Z,1510169572.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:53.254Z,1510169573.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:53.286Z,1510169573.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:53.657Z,1510169573.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:53.684Z,1510169573.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:54.057Z,1510169574.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:54.084Z,1510169574.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:54.444Z,1510169574.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:54.460Z,1510169574.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:54.843Z,1510169574.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:54.863Z,1510169574.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:55.261Z,1510169575.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:55.289Z,1510169575.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:55.662Z,1510169575.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:55.688Z,1510169575.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:56.058Z,1510169576.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:56.090Z,1510169576.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:56.174Z,1510169576.174 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-08T19:32:56.455Z,1510169576.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:56.488Z,1510169576.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:56.843Z,1510169576.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:56.863Z,1510169576.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:57.258Z,1510169577.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:57.286Z,1510169577.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:57.661Z,1510169577.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:57.693Z,1510169577.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:58.058Z,1510169578.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:58.096Z,1510169578.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:58.447Z,1510169578.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:58.464Z,1510169578.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:58.847Z,1510169578.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:58.863Z,1510169578.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:59.258Z,1510169579.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:59.291Z,1510169579.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:32:59.658Z,1510169579.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:32:59.675Z,1510169579.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:00.058Z,1510169580.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:00.074Z,1510169580.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:00.447Z,1510169580.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:00.519Z,1510169580.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:00.848Z,1510169580.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:00.877Z,1510169580.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:01.250Z,1510169581.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:01.305Z,1510169581.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:01.658Z,1510169581.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:01.675Z,1510169581.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:02.058Z,1510169582.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:02.080Z,1510169582.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:02.459Z,1510169582.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:02.514Z,1510169582.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:02.850Z,1510169582.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:02.866Z,1510169582.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:03.247Z,1510169583.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:03.307Z,1510169583.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:03.651Z,1510169583.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:03.667Z,1510169583.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:04.042Z,1510169584.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:04.072Z,1510169584.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:04.458Z,1510169584.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:04.474Z,1510169584.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:04.859Z,1510169584.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:04.879Z,1510169584.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:05.259Z,1510169585.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:05.280Z,1510169585.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:05.648Z,1510169585.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:05.665Z,1510169585.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:06.050Z,1510169586.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:06.066Z,1510169586.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:06.450Z,1510169586.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:06.471Z,1510169586.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:06.849Z,1510169586.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:06.865Z,1510169586.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:07.262Z,1510169587.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:07.309Z,1510169587.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:07.658Z,1510169587.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:07.674Z,1510169587.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:08.058Z,1510169588.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:08.075Z,1510169588.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:08.451Z,1510169588.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:08.468Z,1510169588.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:08.843Z,1510169588.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:08.864Z,1510169588.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:09.258Z,1510169589.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:09.275Z,1510169589.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:09.660Z,1510169589.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:09.676Z,1510169589.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:10.056Z,1510169590.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:10.072Z,1510169590.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:10.452Z,1510169590.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:10.468Z,1510169590.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:10.850Z,1510169590.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:10.874Z,1510169590.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:11.260Z,1510169591.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:11.283Z,1510169591.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:11.663Z,1510169591.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:11.715Z,1510169591.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:12.063Z,1510169592.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:12.108Z,1510169592.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:12.451Z,1510169592.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:12.473Z,1510169592.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:12.859Z,1510169592.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:12.876Z,1510169592.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:13.265Z,1510169593.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:13.285Z,1510169593.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:13.663Z,1510169593.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:13.681Z,1510169593.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:14.061Z,1510169594.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:14.077Z,1510169594.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:14.457Z,1510169594.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:14.473Z,1510169594.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:14.851Z,1510169594.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:14.872Z,1510169594.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:15.260Z,1510169595.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:15.277Z,1510169595.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:15.660Z,1510169595.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:15.677Z,1510169595.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:16.059Z,1510169596.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:16.084Z,1510169596.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:16.447Z,1510169596.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:16.470Z,1510169596.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:16.850Z,1510169596.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:16.867Z,1510169596.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:17.264Z,1510169597.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:17.283Z,1510169597.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:17.663Z,1510169597.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:17.679Z,1510169597.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:18.065Z,1510169598.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:18.081Z,1510169598.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:18.441Z,1510169598.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:18.470Z,1510169598.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:18.847Z,1510169598.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:18.887Z,1510169598.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:19.265Z,1510169599.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:19.282Z,1510169599.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:19.660Z,1510169599.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:19.677Z,1510169599.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:20.067Z,1510169600.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:20.093Z,1510169600.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:20.445Z,1510169600.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:20.487Z,1510169600.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:20.844Z,1510169600.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:20.877Z,1510169600.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:21.273Z,1510169601.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:21.303Z,1510169601.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:21.662Z,1510169601.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:21.685Z,1510169601.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:22.055Z,1510169602.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:22.082Z,1510169602.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:22.444Z,1510169602.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:22.481Z,1510169602.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:22.843Z,1510169602.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:22.860Z,1510169602.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:23.259Z,1510169603.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:23.300Z,1510169603.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:23.658Z,1510169603.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:23.724Z,1510169603.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:24.057Z,1510169604.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:24.117Z,1510169604.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:24.447Z,1510169604.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:24.468Z,1510169604.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:24.846Z,1510169604.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:24.907Z,1510169604.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:25.257Z,1510169605.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:25.289Z,1510169605.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:25.653Z,1510169605.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:25.708Z,1510169605.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:26.060Z,1510169606.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:26.090Z,1510169606.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:26.453Z,1510169606.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:26.491Z,1510169606.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:26.844Z,1510169606.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:26.860Z,1510169606.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:27.260Z,1510169607.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:27.293Z,1510169607.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:27.653Z,1510169607.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:27.692Z,1510169607.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:28.055Z,1510169608.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:28.091Z,1510169608.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:28.094Z,1510169608.094 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-08T19:33:28.095Z,1510169608.095 [Default:CheckIn:C.Wait] Stopped
2017-11-08T19:33:28.095Z,1510169608.095 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-08T19:33:28.095Z,1510169608.095 [Default:CheckIn:D] Running Loop=1
2017-11-08T19:33:28.452Z,1510169608.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:28.495Z,1510169608.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:28.499Z,1510169608.499 [Default:CheckIn:D] Stopped
2017-11-08T19:33:28.499Z,1510169608.499 [Default:CheckIn:E] Running Loop=1
2017-11-08T19:33:28.846Z,1510169608.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:28.862Z,1510169608.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:28.865Z,1510169608.865 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 366.791992 min 
2017-11-08T19:33:28.865Z,1510169608.865 [Default:CheckIn:E] Stopped
2017-11-08T19:33:28.865Z,1510169608.865 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-08T19:33:28.866Z,1510169608.866 [Default:CheckIn] Stopped
2017-11-08T19:33:28.866Z,1510169608.866 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T19:33:28.866Z,1510169608.866 [Default:CheckIn](INFO): Running loop #24
2017-11-08T19:33:28.866Z,1510169608.866 [Default:CheckIn] Running Loop=24
2017-11-08T19:33:28.866Z,1510169608.866 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-08T19:33:28.866Z,1510169608.866 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-08T19:33:28.985Z,1510169608.985 [CommandLine](IMPORTANT): got command quit
2017-11-08T19:33:29.997Z,1510169609.997 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread.
2017-11-08T19:33:29.998Z,1510169609.998 [CommandLine ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:30.060Z,1510169610.060 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2017-11-08T19:33:30.061Z,1510169610.061 [CommandLine ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:30.062Z,1510169610.062 [CommandLine](INFO): Join timeout helper Thread ID is 1578
2017-11-08T19:33:30.073Z,1510169610.073 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2017-11-08T19:33:30.073Z,1510169610.073 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:30.073Z,1510169610.073 [NavChartDb](INFO): Join timeout helper Thread ID is 1579
2017-11-08T19:33:30.169Z,1510169610.169 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread.
2017-11-08T19:33:30.169Z,1510169610.169 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:30.185Z,1510169610.185 [ComponentRegistry](INFO): Shutting down WetLabsBB2FL ThreadHandler
2017-11-08T19:33:30.185Z,1510169610.185 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:30.185Z,1510169610.185 [WetLabsBB2FL](INFO): Join timeout helper Thread ID is 1580
2017-11-08T19:33:30.249Z,1510169610.249 [WetLabsBB2FL ThreadHandler](INFO): Uninitializing protected caller thread.
2017-11-08T19:33:30.249Z,1510169610.249 [WetLabsBB2FL](INFO): Powering down
2017-11-08T19:33:30.250Z,1510169610.250 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:30.257Z,1510169610.257 [ComponentRegistry](INFO): Shutting down CTD_Seabird ThreadHandler
2017-11-08T19:33:30.257Z,1510169610.257 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:30.257Z,1510169610.257 [CTD_Seabird](INFO): Join timeout helper Thread ID is 1581
2017-11-08T19:33:30.357Z,1510169610.357 [CTD_Seabird ThreadHandler](INFO): Uninitializing protected caller thread.
2017-11-08T19:33:30.512Z,1510169610.512 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2017-11-08T19:33:30.513Z,1510169610.513 [CTD_Seabird](INFO): Powering down
2017-11-08T19:33:30.514Z,1510169610.514 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:30.525Z,1510169610.525 [ComponentRegistry](INFO): Shutting down Rowe_600LCM ThreadHandler
2017-11-08T19:33:30.525Z,1510169610.525 [Rowe_600LCM ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:30.525Z,1510169610.525 [Rowe_600LCM](INFO): Join timeout helper Thread ID is 1583
2017-11-08T19:33:30.669Z,1510169610.669 [Rowe_600LCM ThreadHandler](INFO): Uninitializing protected caller thread.
2017-11-08T19:33:30.669Z,1510169610.669 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-08T19:33:30.815Z,1510169610.815 [Rowe_600LCM](INFO): Powering down
2017-11-08T19:33:30.817Z,1510169610.817 [Rowe_600LCM ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:30.838Z,1510169610.838 [ComponentRegistry](INFO): Shutting down Radio_Surface ThreadHandler
2017-11-08T19:33:30.838Z,1510169610.838 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:30.839Z,1510169610.839 [Radio_Surface](INFO): Join timeout helper Thread ID is 1585
2017-11-08T19:33:30.957Z,1510169610.957 [Radio_Surface ThreadHandler](INFO): Uninitializing protected caller thread.
2017-11-08T19:33:30.957Z,1510169610.957 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:30.965Z,1510169610.965 [ComponentRegistry](INFO): Shutting down logger ThreadHandler
2017-11-08T19:33:30.966Z,1510169610.966 [logger ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:30.966Z,1510169610.966 [logger](INFO): Join timeout helper Thread ID is 1586
2017-11-08T19:33:30.993Z,1510169610.993 [logger ThreadHandler](INFO): Uninitializing protected caller thread.
2017-11-08T19:33:30.993Z,1510169610.993 [logger ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:30.997Z,1510169610.997 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler
2017-11-08T19:33:30.998Z,1510169610.998 [CommandLine ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:30.998Z,1510169610.998 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler
2017-11-08T19:33:30.998Z,1510169610.998 [controlThread ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:30.998Z,1510169610.998 [controlThread](INFO): Join timeout helper Thread ID is 1587
2017-11-08T19:33:32.198Z,1510169612.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-08T19:33:32.221Z,1510169612.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-08T19:33:32.303Z,1510169612.303 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread.
2017-11-08T19:33:32.303Z,1510169612.303 [controlThread](DEBUG): Uninitializing ControlThread
2017-11-08T19:33:32.307Z,1510169612.307 [NAL9602](INFO): Powering down
2017-11-08T19:33:32.308Z,1510169612.308 [PNI_TCM](INFO): Powering down
2017-11-08T19:33:32.398Z,1510169612.398 [Aanderaa_O2](INFO): Powering down
2017-11-08T19:33:32.399Z,1510169612.399 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2017-11-08T19:33:32.401Z,1510169612.401 [NavChart](DEBUG): Uninitialize NavChart Navigation.
2017-11-08T19:33:32.401Z,1510169612.401 [MissionManager](INFO): Uninitializing Mission Default
2017-11-08T19:33:32.401Z,1510169612.401 [Default] Stopped
2017-11-08T19:33:32.402Z,1510169612.402 [Default](DEBUG): Aggregate::uninitialize Default
2017-11-08T19:33:32.402Z,1510169612.402 [Default:B.GoToSurface] Stopped
2017-11-08T19:33:32.402Z,1510169612.402 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2017-11-08T19:33:32.402Z,1510169612.402 [Default:CheckIn] Stopped
2017-11-08T19:33:32.402Z,1510169612.402 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-08T19:33:32.402Z,1510169612.402 [Default:CheckIn:Read_GPS] Stopped
2017-11-08T19:33:32.405Z,1510169612.405 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent.
2017-11-08T19:33:32.406Z,1510169612.406 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent.
2017-11-08T19:33:32.406Z,1510169612.406 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent.
2017-11-08T19:33:32.406Z,1510169612.406 [LoopControl](DEBUG): Uninitialize LoopControlComponent.
2017-11-08T19:33:32.407Z,1510169612.407 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2017-11-08T19:33:32.407Z,1510169612.407 [BuoyancyServo](INFO): Powering down
2017-11-08T19:33:32.421Z,1510169612.421 [ElevatorServo](DEBUG): Uninitialize Elevator Servo.
2017-11-08T19:33:32.421Z,1510169612.421 [ElevatorServo](INFO): Powering down
2017-11-08T19:33:32.422Z,1510169612.422 [MassServo](DEBUG): Uninitialize Mass Servo.
2017-11-08T19:33:32.422Z,1510169612.422 [MassServo](INFO): Powering down
2017-11-08T19:33:32.423Z,1510169612.423 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2017-11-08T19:33:32.423Z,1510169612.423 [RudderServo](INFO): Powering down
2017-11-08T19:33:32.424Z,1510169612.424 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2017-11-08T19:33:32.424Z,1510169612.424 [ThrusterServo](INFO): Powering down
2017-11-08T19:33:32.425Z,1510169612.425 [SBIT](DEBUG): Uninitialize SBIT Component.
2017-11-08T19:33:32.425Z,1510169612.425 [IBIT](DEBUG): Uninitialize IBIT Component.
2017-11-08T19:33:32.425Z,1510169612.425 [CBIT](DEBUG): Uninitialize CBIT Component.
2017-11-08T19:33:32.426Z,1510169612.426 [controlThread ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:32.506Z,1510169612.506 [Rowe_600LCM ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:32.513Z,1510169612.513 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:32.538Z,1510169612.538 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:32.542Z,1510169612.542 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:32.717Z,1510169612.717 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2017-11-08T19:33:32.769Z,1510169612.769 [logger ThreadHandler](INFO): Thread cancelled.